| # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) | |
| # Copyright 2019 BayLibre, SAS | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/serial/amlogic,meson-uart.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Amlogic Meson SoC UART Serial Interface | |
| maintainers: | |
| - Neil Armstrong <neil.armstrong@linaro.org> | |
| description: | | |
| The Amlogic Meson SoC UART Serial Interface is present on a large range | |
| of SoCs, and can be present either in the "Always-On" power domain or the | |
| "Everything-Else" power domain. | |
| The particularity of the "Always-On" Serial Interface is that the hardware | |
| is active since power-on and does not need any clock gating and is usable | |
| as very early serial console. | |
| allOf: | |
| - $ref: serial.yaml# | |
| properties: | |
| compatible: | |
| oneOf: | |
| - description: Always-on power domain UART controller | |
| items: | |
| - enum: | |
| - amlogic,meson6-uart | |
| - amlogic,meson8-uart | |
| - amlogic,meson8b-uart | |
| - amlogic,meson-gx-uart | |
| - amlogic,meson-s4-uart | |
| - amlogic,meson-a1-uart | |
| - const: amlogic,meson-ao-uart | |
| - description: Always-on power domain UART controller on G12A SoCs | |
| items: | |
| - const: amlogic,meson-g12a-uart | |
| - const: amlogic,meson-gx-uart | |
| - const: amlogic,meson-ao-uart | |
| - description: Everything-Else power domain UART controller | |
| enum: | |
| - amlogic,meson6-uart | |
| - amlogic,meson8-uart | |
| - amlogic,meson8b-uart | |
| - amlogic,meson-gx-uart | |
| - amlogic,meson-s4-uart | |
| - amlogic,meson-a1-uart | |
| - description: Everything-Else power domain UART controller on G12A SoCs | |
| items: | |
| - const: amlogic,meson-g12a-uart | |
| - const: amlogic,meson-gx-uart | |
| - description: UART controller on S4 compatible SoCs | |
| items: | |
| - enum: | |
| - amlogic,a4-uart | |
| - amlogic,s6-uart | |
| - amlogic,s7-uart | |
| - amlogic,s7d-uart | |
| - amlogic,t7-uart | |
| - const: amlogic,meson-s4-uart | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| maxItems: 1 | |
| clocks: | |
| items: | |
| - description: external xtal clock identifier | |
| - description: the bus core clock, either the clk81 clock or the gate clock | |
| - description: the source of the baudrate generator, can be either the xtal or the pclk | |
| clock-names: | |
| items: | |
| - const: xtal | |
| - const: pclk | |
| - const: baud | |
| fifo-size: | |
| description: The fifo size supported by the UART channel. | |
| $ref: /schemas/types.yaml#/definitions/uint32 | |
| enum: [64, 128] | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| - clocks | |
| - clock-names | |
| unevaluatedProperties: false | |
| examples: | |
| - | | |
| serial@84c0 { | |
| compatible = "amlogic,meson-gx-uart"; | |
| reg = <0x84c0 0x14>; | |
| interrupts = <26>; | |
| clocks = <&xtal>, <&pclk>, <&xtal>; | |
| clock-names = "xtal", "pclk", "baud"; | |
| }; |