| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/pinctrl/intel,lgm-io.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Intel Lightning Mountain SoC pinmux & GPIO controller | |
| maintainers: | |
| - Rahul Tanwar <rahul.tanwar@linux.intel.com> | |
| description: | | |
| Pinmux & GPIO controller controls pin multiplexing & configuration including | |
| GPIO function selection & GPIO attributes configuration. | |
| properties: | |
| compatible: | |
| const: intel,lgm-io | |
| reg: | |
| maxItems: 1 | |
| # Client device subnode's properties | |
| patternProperties: | |
| '-pins$': | |
| type: object | |
| description: | |
| Pinctrl node's client devices use subnodes for desired pin configuration. | |
| Client device subnodes use below standard properties. | |
| $ref: pinmux-node.yaml# | |
| properties: | |
| function: true | |
| groups: true | |
| pins: true | |
| pinmux: true | |
| bias-pull-up: true | |
| bias-pull-down: true | |
| drive-strength: true | |
| slew-rate: true | |
| drive-open-drain: true | |
| output-enable: true | |
| required: | |
| - function | |
| - groups | |
| additionalProperties: false | |
| allOf: | |
| - $ref: pinctrl.yaml# | |
| required: | |
| - compatible | |
| - reg | |
| additionalProperties: false | |
| examples: | |
| # Pinmux controller node | |
| - | | |
| pinctrl: pinctrl@e2880000 { | |
| compatible = "intel,lgm-io"; | |
| reg = <0xe2880000 0x100000>; | |
| uart0-pins { | |
| pins = <64>, /* UART_RX0 */ | |
| <65>; /* UART_TX0 */ | |
| function = "CONSOLE_UART0"; | |
| pinmux = <1>, | |
| <1>; | |
| groups = "CONSOLE_UART0"; | |
| }; | |
| }; | |
| ... |