| // SPDX-License-Identifier: GPL-2.0 | |
| // | |
| // rt1015.c -- RT1015 ALSA SoC audio amplifier driver | |
| // | |
| // Copyright 2019 Realtek Semiconductor Corp. | |
| // | |
| // Author: Jack Yu <jack.yu@realtek.com> | |
| // | |
| // | |
| #include <linux/acpi.h> | |
| #include <linux/delay.h> | |
| #include <linux/firmware.h> | |
| #include <linux/fs.h> | |
| #include <linux/i2c.h> | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pm.h> | |
| #include <linux/regmap.h> | |
| #include <sound/core.h> | |
| #include <sound/initval.h> | |
| #include <sound/pcm.h> | |
| #include <sound/pcm_params.h> | |
| #include <sound/rt1015.h> | |
| #include <sound/soc-dapm.h> | |
| #include <sound/soc.h> | |
| #include <sound/tlv.h> | |
| #include "rl6231.h" | |
| #include "rt1015.h" | |
| static const struct rt1015_platform_data i2s_default_platform_data = { | |
| .power_up_delay_ms = 50, | |
| }; | |
| static const struct reg_default rt1015_reg[] = { | |
| { 0x0000, 0x0000 }, | |
| { 0x0004, 0xa000 }, | |
| { 0x0006, 0x0003 }, | |
| { 0x000a, 0x081e }, | |
| { 0x000c, 0x0006 }, | |
| { 0x000e, 0x0000 }, | |
| { 0x0010, 0x0000 }, | |
| { 0x0012, 0x0000 }, | |
| { 0x0014, 0x0000 }, | |
| { 0x0016, 0x0000 }, | |
| { 0x0018, 0x0000 }, | |
| { 0x0020, 0x8000 }, | |
| { 0x0022, 0x8043 }, | |
| { 0x0076, 0x0000 }, | |
| { 0x0078, 0x0000 }, | |
| { 0x007a, 0x0002 }, | |
| { 0x007c, 0x10ec }, | |
| { 0x007d, 0x1015 }, | |
| { 0x00f0, 0x5000 }, | |
| { 0x00f2, 0x004c }, | |
| { 0x00f3, 0xecfe }, | |
| { 0x00f4, 0x0000 }, | |
| { 0x00f6, 0x0400 }, | |
| { 0x0100, 0x0028 }, | |
| { 0x0102, 0xff02 }, | |
| { 0x0104, 0xa213 }, | |
| { 0x0106, 0x200c }, | |
| { 0x010c, 0x0000 }, | |
| { 0x010e, 0x0058 }, | |
| { 0x0111, 0x0200 }, | |
| { 0x0112, 0x0400 }, | |
| { 0x0114, 0x0022 }, | |
| { 0x0116, 0x0000 }, | |
| { 0x0118, 0x0000 }, | |
| { 0x011a, 0x0123 }, | |
| { 0x011c, 0x4567 }, | |
| { 0x0300, 0x203d }, | |
| { 0x0302, 0x001e }, | |
| { 0x0311, 0x0000 }, | |
| { 0x0313, 0x6014 }, | |
| { 0x0314, 0x00a2 }, | |
| { 0x031a, 0x00a0 }, | |
| { 0x031c, 0x001f }, | |
| { 0x031d, 0xffff }, | |
| { 0x031e, 0x0000 }, | |
| { 0x031f, 0x0000 }, | |
| { 0x0320, 0x0000 }, | |
| { 0x0321, 0x0000 }, | |
| { 0x0322, 0xd7df }, | |
| { 0x0328, 0x10b2 }, | |
| { 0x0329, 0x0175 }, | |
| { 0x032a, 0x36ad }, | |
| { 0x032b, 0x7e55 }, | |
| { 0x032c, 0x0520 }, | |
| { 0x032d, 0xaa00 }, | |
| { 0x032e, 0x570e }, | |
| { 0x0330, 0xe180 }, | |
| { 0x0332, 0x0034 }, | |
| { 0x0334, 0x0001 }, | |
| { 0x0336, 0x0010 }, | |
| { 0x0338, 0x0000 }, | |
| { 0x04fa, 0x0030 }, | |
| { 0x04fc, 0x35c8 }, | |
| { 0x04fe, 0x0800 }, | |
| { 0x0500, 0x0400 }, | |
| { 0x0502, 0x1000 }, | |
| { 0x0504, 0x0000 }, | |
| { 0x0506, 0x04ff }, | |
| { 0x0508, 0x0010 }, | |
| { 0x050a, 0x001a }, | |
| { 0x0519, 0x1c68 }, | |
| { 0x051a, 0x0ccc }, | |
| { 0x051b, 0x0666 }, | |
| { 0x051d, 0x0000 }, | |
| { 0x051f, 0x0000 }, | |
| { 0x0536, 0x061c }, | |
| { 0x0538, 0x0000 }, | |
| { 0x053a, 0x0000 }, | |
| { 0x053c, 0x0000 }, | |
| { 0x053d, 0x0000 }, | |
| { 0x053e, 0x0000 }, | |
| { 0x053f, 0x0000 }, | |
| { 0x0540, 0x0000 }, | |
| { 0x0541, 0x0000 }, | |
| { 0x0542, 0x0000 }, | |
| { 0x0543, 0x0000 }, | |
| { 0x0544, 0x0000 }, | |
| { 0x0568, 0x0000 }, | |
| { 0x056a, 0x0000 }, | |
| { 0x1000, 0x0040 }, | |
| { 0x1002, 0x5405 }, | |
| { 0x1006, 0x5515 }, | |
| { 0x1007, 0x05f7 }, | |
| { 0x1009, 0x0b0a }, | |
| { 0x100a, 0x00ef }, | |
| { 0x100d, 0x0003 }, | |
| { 0x1010, 0xa433 }, | |
| { 0x1020, 0x0000 }, | |
| { 0x1200, 0x5a01 }, | |
| { 0x1202, 0x6524 }, | |
| { 0x1204, 0x1f00 }, | |
| { 0x1206, 0x0000 }, | |
| { 0x1208, 0x0000 }, | |
| { 0x120a, 0x0000 }, | |
| { 0x120c, 0x0000 }, | |
| { 0x120e, 0x0000 }, | |
| { 0x1210, 0x0000 }, | |
| { 0x1212, 0x0000 }, | |
| { 0x1300, 0x10a1 }, | |
| { 0x1302, 0x12ff }, | |
| { 0x1304, 0x0400 }, | |
| { 0x1305, 0x0844 }, | |
| { 0x1306, 0x4611 }, | |
| { 0x1308, 0x555e }, | |
| { 0x130a, 0x0000 }, | |
| { 0x130c, 0x2000 }, | |
| { 0x130e, 0x0100 }, | |
| { 0x130f, 0x0001 }, | |
| { 0x1310, 0x0000 }, | |
| { 0x1312, 0x0000 }, | |
| { 0x1314, 0x0000 }, | |
| { 0x1316, 0x0000 }, | |
| { 0x1318, 0x0000 }, | |
| { 0x131a, 0x0000 }, | |
| { 0x1322, 0x0029 }, | |
| { 0x1323, 0x4a52 }, | |
| { 0x1324, 0x002c }, | |
| { 0x1325, 0x0b02 }, | |
| { 0x1326, 0x002d }, | |
| { 0x1327, 0x6b5a }, | |
| { 0x1328, 0x002e }, | |
| { 0x1329, 0xcbb2 }, | |
| { 0x132a, 0x0030 }, | |
| { 0x132b, 0x2c0b }, | |
| { 0x1330, 0x0031 }, | |
| { 0x1331, 0x8c63 }, | |
| { 0x1332, 0x0032 }, | |
| { 0x1333, 0xecbb }, | |
| { 0x1334, 0x0034 }, | |
| { 0x1335, 0x4d13 }, | |
| { 0x1336, 0x0037 }, | |
| { 0x1337, 0x0dc3 }, | |
| { 0x1338, 0x003d }, | |
| { 0x1339, 0xef7b }, | |
| { 0x133a, 0x0044 }, | |
| { 0x133b, 0xd134 }, | |
| { 0x133c, 0x0047 }, | |
| { 0x133d, 0x91e4 }, | |
| { 0x133e, 0x004d }, | |
| { 0x133f, 0xc370 }, | |
| { 0x1340, 0x0053 }, | |
| { 0x1341, 0xf4fd }, | |
| { 0x1342, 0x0060 }, | |
| { 0x1343, 0x5816 }, | |
| { 0x1344, 0x006c }, | |
| { 0x1345, 0xbb2e }, | |
| { 0x1346, 0x0072 }, | |
| { 0x1347, 0xecbb }, | |
| { 0x1348, 0x0076 }, | |
| { 0x1349, 0x5d97 }, | |
| }; | |
| static bool rt1015_volatile_register(struct device *dev, unsigned int reg) | |
| { | |
| switch (reg) { | |
| case RT1015_RESET: | |
| case RT1015_CLK_DET: | |
| case RT1015_SIL_DET: | |
| case RT1015_VER_ID: | |
| case RT1015_VENDOR_ID: | |
| case RT1015_DEVICE_ID: | |
| case RT1015_PRO_ALT: | |
| case RT1015_MAN_I2C: | |
| case RT1015_DAC3: | |
| case RT1015_VBAT_TEST_OUT1: | |
| case RT1015_VBAT_TEST_OUT2: | |
| case RT1015_VBAT_PROT_ATT: | |
| case RT1015_VBAT_DET_CODE: | |
| case RT1015_SMART_BST_CTRL1: | |
| case RT1015_SPK_DC_DETECT1: | |
| case RT1015_SPK_DC_DETECT4: | |
| case RT1015_SPK_DC_DETECT5: | |
| case RT1015_DC_CALIB_CLSD1: | |
| case RT1015_DC_CALIB_CLSD5: | |
| case RT1015_DC_CALIB_CLSD6: | |
| case RT1015_DC_CALIB_CLSD7: | |
| case RT1015_DC_CALIB_CLSD8: | |
| case RT1015_S_BST_TIMING_INTER1: | |
| case RT1015_OSCK_STA: | |
| case RT1015_MONO_DYNA_CTRL1: | |
| case RT1015_MONO_DYNA_CTRL5: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| static bool rt1015_readable_register(struct device *dev, unsigned int reg) | |
| { | |
| switch (reg) { | |
| case RT1015_RESET: | |
| case RT1015_CLK2: | |
| case RT1015_CLK3: | |
| case RT1015_PLL1: | |
| case RT1015_PLL2: | |
| case RT1015_DUM_RW1: | |
| case RT1015_DUM_RW2: | |
| case RT1015_DUM_RW3: | |
| case RT1015_DUM_RW4: | |
| case RT1015_DUM_RW5: | |
| case RT1015_DUM_RW6: | |
| case RT1015_CLK_DET: | |
| case RT1015_SIL_DET: | |
| case RT1015_CUSTOMER_ID: | |
| case RT1015_PCODE_FWVER: | |
| case RT1015_VER_ID: | |
| case RT1015_VENDOR_ID: | |
| case RT1015_DEVICE_ID: | |
| case RT1015_PAD_DRV1: | |
| case RT1015_PAD_DRV2: | |
| case RT1015_GAT_BOOST: | |
| case RT1015_PRO_ALT: | |
| case RT1015_OSCK_STA: | |
| case RT1015_MAN_I2C: | |
| case RT1015_DAC1: | |
| case RT1015_DAC2: | |
| case RT1015_DAC3: | |
| case RT1015_ADC1: | |
| case RT1015_ADC2: | |
| case RT1015_TDM_MASTER: | |
| case RT1015_TDM_TCON: | |
| case RT1015_TDM1_1: | |
| case RT1015_TDM1_2: | |
| case RT1015_TDM1_3: | |
| case RT1015_TDM1_4: | |
| case RT1015_TDM1_5: | |
| case RT1015_MIXER1: | |
| case RT1015_MIXER2: | |
| case RT1015_ANA_PROTECT1: | |
| case RT1015_ANA_CTRL_SEQ1: | |
| case RT1015_ANA_CTRL_SEQ2: | |
| case RT1015_VBAT_DET_DEB: | |
| case RT1015_VBAT_VOLT_DET1: | |
| case RT1015_VBAT_VOLT_DET2: | |
| case RT1015_VBAT_TEST_OUT1: | |
| case RT1015_VBAT_TEST_OUT2: | |
| case RT1015_VBAT_PROT_ATT: | |
| case RT1015_VBAT_DET_CODE: | |
| case RT1015_PWR1: | |
| case RT1015_PWR4: | |
| case RT1015_PWR5: | |
| case RT1015_PWR6: | |
| case RT1015_PWR7: | |
| case RT1015_PWR8: | |
| case RT1015_PWR9: | |
| case RT1015_CLASSD_SEQ: | |
| case RT1015_SMART_BST_CTRL1: | |
| case RT1015_SMART_BST_CTRL2: | |
| case RT1015_ANA_CTRL1: | |
| case RT1015_ANA_CTRL2: | |
| case RT1015_PWR_STATE_CTRL: | |
| case RT1015_MONO_DYNA_CTRL: | |
| case RT1015_MONO_DYNA_CTRL1: | |
| case RT1015_MONO_DYNA_CTRL2: | |
| case RT1015_MONO_DYNA_CTRL3: | |
| case RT1015_MONO_DYNA_CTRL4: | |
| case RT1015_MONO_DYNA_CTRL5: | |
| case RT1015_SPK_VOL: | |
| case RT1015_SHORT_DETTOP1: | |
| case RT1015_SHORT_DETTOP2: | |
| case RT1015_SPK_DC_DETECT1: | |
| case RT1015_SPK_DC_DETECT2: | |
| case RT1015_SPK_DC_DETECT3: | |
| case RT1015_SPK_DC_DETECT4: | |
| case RT1015_SPK_DC_DETECT5: | |
| case RT1015_BAT_RPO_STEP1: | |
| case RT1015_BAT_RPO_STEP2: | |
| case RT1015_BAT_RPO_STEP3: | |
| case RT1015_BAT_RPO_STEP4: | |
| case RT1015_BAT_RPO_STEP5: | |
| case RT1015_BAT_RPO_STEP6: | |
| case RT1015_BAT_RPO_STEP7: | |
| case RT1015_BAT_RPO_STEP8: | |
| case RT1015_BAT_RPO_STEP9: | |
| case RT1015_BAT_RPO_STEP10: | |
| case RT1015_BAT_RPO_STEP11: | |
| case RT1015_BAT_RPO_STEP12: | |
| case RT1015_SPREAD_SPEC1: | |
| case RT1015_SPREAD_SPEC2: | |
| case RT1015_PAD_STATUS: | |
| case RT1015_PADS_PULLING_CTRL1: | |
| case RT1015_PADS_DRIVING: | |
| case RT1015_SYS_RST1: | |
| case RT1015_SYS_RST2: | |
| case RT1015_SYS_GATING1: | |
| case RT1015_TEST_MODE1: | |
| case RT1015_TEST_MODE2: | |
| case RT1015_TIMING_CTRL1: | |
| case RT1015_PLL_INT: | |
| case RT1015_TEST_OUT1: | |
| case RT1015_DC_CALIB_CLSD1: | |
| case RT1015_DC_CALIB_CLSD2: | |
| case RT1015_DC_CALIB_CLSD3: | |
| case RT1015_DC_CALIB_CLSD4: | |
| case RT1015_DC_CALIB_CLSD5: | |
| case RT1015_DC_CALIB_CLSD6: | |
| case RT1015_DC_CALIB_CLSD7: | |
| case RT1015_DC_CALIB_CLSD8: | |
| case RT1015_DC_CALIB_CLSD9: | |
| case RT1015_DC_CALIB_CLSD10: | |
| case RT1015_CLSD_INTERNAL1: | |
| case RT1015_CLSD_INTERNAL2: | |
| case RT1015_CLSD_INTERNAL3: | |
| case RT1015_CLSD_INTERNAL4: | |
| case RT1015_CLSD_INTERNAL5: | |
| case RT1015_CLSD_INTERNAL6: | |
| case RT1015_CLSD_INTERNAL7: | |
| case RT1015_CLSD_INTERNAL8: | |
| case RT1015_CLSD_INTERNAL9: | |
| case RT1015_CLSD_OCP_CTRL: | |
| case RT1015_VREF_LV: | |
| case RT1015_MBIAS1: | |
| case RT1015_MBIAS2: | |
| case RT1015_MBIAS3: | |
| case RT1015_MBIAS4: | |
| case RT1015_VREF_LV1: | |
| case RT1015_S_BST_TIMING_INTER1: | |
| case RT1015_S_BST_TIMING_INTER2: | |
| case RT1015_S_BST_TIMING_INTER3: | |
| case RT1015_S_BST_TIMING_INTER4: | |
| case RT1015_S_BST_TIMING_INTER5: | |
| case RT1015_S_BST_TIMING_INTER6: | |
| case RT1015_S_BST_TIMING_INTER7: | |
| case RT1015_S_BST_TIMING_INTER8: | |
| case RT1015_S_BST_TIMING_INTER9: | |
| case RT1015_S_BST_TIMING_INTER10: | |
| case RT1015_S_BST_TIMING_INTER11: | |
| case RT1015_S_BST_TIMING_INTER12: | |
| case RT1015_S_BST_TIMING_INTER13: | |
| case RT1015_S_BST_TIMING_INTER14: | |
| case RT1015_S_BST_TIMING_INTER15: | |
| case RT1015_S_BST_TIMING_INTER16: | |
| case RT1015_S_BST_TIMING_INTER17: | |
| case RT1015_S_BST_TIMING_INTER18: | |
| case RT1015_S_BST_TIMING_INTER19: | |
| case RT1015_S_BST_TIMING_INTER20: | |
| case RT1015_S_BST_TIMING_INTER21: | |
| case RT1015_S_BST_TIMING_INTER22: | |
| case RT1015_S_BST_TIMING_INTER23: | |
| case RT1015_S_BST_TIMING_INTER24: | |
| case RT1015_S_BST_TIMING_INTER25: | |
| case RT1015_S_BST_TIMING_INTER26: | |
| case RT1015_S_BST_TIMING_INTER27: | |
| case RT1015_S_BST_TIMING_INTER28: | |
| case RT1015_S_BST_TIMING_INTER29: | |
| case RT1015_S_BST_TIMING_INTER30: | |
| case RT1015_S_BST_TIMING_INTER31: | |
| case RT1015_S_BST_TIMING_INTER32: | |
| case RT1015_S_BST_TIMING_INTER33: | |
| case RT1015_S_BST_TIMING_INTER34: | |
| case RT1015_S_BST_TIMING_INTER35: | |
| case RT1015_S_BST_TIMING_INTER36: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -9525, 75, 0); | |
| static const char * const rt1015_din_source_select[] = { | |
| "Left", | |
| "Right", | |
| "Left + Right average", | |
| }; | |
| static SOC_ENUM_SINGLE_DECL(rt1015_mono_lr_sel, RT1015_PAD_DRV2, 4, | |
| rt1015_din_source_select); | |
| static const char * const rt1015_boost_mode[] = { | |
| "Bypass", "Adaptive", "Fixed Adaptive" | |
| }; | |
| static SOC_ENUM_SINGLE_DECL(rt1015_boost_mode_enum, 0, 0, | |
| rt1015_boost_mode); | |
| static int rt1015_boost_mode_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); | |
| struct rt1015_priv *rt1015 = | |
| snd_soc_component_get_drvdata(component); | |
| ucontrol->value.integer.value[0] = rt1015->boost_mode; | |
| return 0; | |
| } | |
| static int rt1015_boost_mode_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); | |
| struct rt1015_priv *rt1015 = | |
| snd_soc_component_get_drvdata(component); | |
| int boost_mode = ucontrol->value.integer.value[0]; | |
| switch (boost_mode) { | |
| case BYPASS: | |
| snd_soc_component_update_bits(component, | |
| RT1015_SMART_BST_CTRL1, RT1015_ABST_AUTO_EN_MASK | | |
| RT1015_ABST_FIX_TGT_MASK | RT1015_BYPASS_SWR_REG_MASK, | |
| RT1015_ABST_REG_MODE | RT1015_ABST_FIX_TGT_DIS | | |
| RT1015_BYPASS_SWRREG_BYPASS); | |
| break; | |
| case ADAPTIVE: | |
| snd_soc_component_update_bits(component, | |
| RT1015_SMART_BST_CTRL1, RT1015_ABST_AUTO_EN_MASK | | |
| RT1015_ABST_FIX_TGT_MASK | RT1015_BYPASS_SWR_REG_MASK, | |
| RT1015_ABST_AUTO_MODE | RT1015_ABST_FIX_TGT_DIS | | |
| RT1015_BYPASS_SWRREG_PASS); | |
| break; | |
| case FIXED_ADAPTIVE: | |
| snd_soc_component_update_bits(component, | |
| RT1015_SMART_BST_CTRL1, RT1015_ABST_AUTO_EN_MASK | | |
| RT1015_ABST_FIX_TGT_MASK | RT1015_BYPASS_SWR_REG_MASK, | |
| RT1015_ABST_AUTO_MODE | RT1015_ABST_FIX_TGT_EN | | |
| RT1015_BYPASS_SWRREG_PASS); | |
| break; | |
| default: | |
| dev_err(component->dev, "Unknown boost control.\n"); | |
| return -EINVAL; | |
| } | |
| rt1015->boost_mode = boost_mode; | |
| return 0; | |
| } | |
| static int rt1015_bypass_boost_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); | |
| struct rt1015_priv *rt1015 = | |
| snd_soc_component_get_drvdata(component); | |
| ucontrol->value.integer.value[0] = rt1015->bypass_boost; | |
| return 0; | |
| } | |
| static void rt1015_calibrate(struct rt1015_priv *rt1015) | |
| { | |
| struct snd_soc_component *component = rt1015->component; | |
| struct snd_soc_dapm_context *dapm = snd_soc_component_to_dapm(component); | |
| struct regmap *regmap = rt1015->regmap; | |
| snd_soc_dapm_mutex_lock(dapm); | |
| regcache_cache_bypass(regmap, true); | |
| regmap_write(regmap, RT1015_CLK_DET, 0x0000); | |
| regmap_write(regmap, RT1015_PWR4, 0x00B2); | |
| regmap_write(regmap, RT1015_PWR_STATE_CTRL, 0x0009); | |
| msleep(100); | |
| regmap_write(regmap, RT1015_PWR_STATE_CTRL, 0x000A); | |
| msleep(100); | |
| regmap_write(regmap, RT1015_PWR_STATE_CTRL, 0x000C); | |
| msleep(100); | |
| regmap_write(regmap, RT1015_CLSD_INTERNAL8, 0x2028); | |
| regmap_write(regmap, RT1015_CLSD_INTERNAL9, 0x0140); | |
| regmap_write(regmap, RT1015_PWR_STATE_CTRL, 0x000D); | |
| msleep(300); | |
| regmap_write(regmap, RT1015_PWR_STATE_CTRL, 0x0008); | |
| regmap_write(regmap, RT1015_SYS_RST1, 0x05F5); | |
| regmap_write(regmap, RT1015_CLK_DET, 0x8000); | |
| regcache_cache_bypass(regmap, false); | |
| regcache_mark_dirty(regmap); | |
| regcache_sync(regmap); | |
| snd_soc_dapm_mutex_unlock(dapm); | |
| } | |
| static int rt1015_bypass_boost_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); | |
| struct rt1015_priv *rt1015 = | |
| snd_soc_component_get_drvdata(component); | |
| if (rt1015->dac_is_used) { | |
| dev_err(component->dev, "DAC is being used!\n"); | |
| return -EBUSY; | |
| } | |
| rt1015->bypass_boost = ucontrol->value.integer.value[0]; | |
| if (rt1015->bypass_boost == RT1015_Bypass_Boost && | |
| !rt1015->cali_done) { | |
| rt1015_calibrate(rt1015); | |
| rt1015->cali_done = 1; | |
| regmap_write(rt1015->regmap, RT1015_MONO_DYNA_CTRL, 0x0010); | |
| } | |
| return 0; | |
| } | |
| static const char * const rt1015_dac_output_vol_select[] = { | |
| "immediate", | |
| "zero detection + immediate change", | |
| "zero detection + inc/dec change", | |
| "zero detection + soft inc/dec change", | |
| }; | |
| static SOC_ENUM_SINGLE_DECL(rt1015_dac_vol_ctl_enum, | |
| RT1015_DAC3, 2, rt1015_dac_output_vol_select); | |
| static const struct snd_kcontrol_new rt1015_snd_controls[] = { | |
| SOC_SINGLE_TLV("DAC Playback Volume", RT1015_DAC1, RT1015_DAC_VOL_SFT, | |
| 127, 0, dac_vol_tlv), | |
| SOC_DOUBLE("DAC Playback Switch", RT1015_DAC3, | |
| RT1015_DA_MUTE_SFT, RT1015_DVOL_MUTE_FLAG_SFT, 1, 1), | |
| SOC_ENUM_EXT("Boost Mode", rt1015_boost_mode_enum, | |
| rt1015_boost_mode_get, rt1015_boost_mode_put), | |
| SOC_ENUM("Mono LR Select", rt1015_mono_lr_sel), | |
| SOC_SINGLE_EXT("Bypass Boost", SND_SOC_NOPM, 0, 1, 0, | |
| rt1015_bypass_boost_get, rt1015_bypass_boost_put), | |
| /* DAC Output Volume Control */ | |
| SOC_ENUM("DAC Output Control", rt1015_dac_vol_ctl_enum), | |
| }; | |
| static int rt1015_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source, | |
| struct snd_soc_dapm_widget *sink) | |
| { | |
| struct snd_soc_component *component = | |
| snd_soc_dapm_to_component(source->dapm); | |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); | |
| if (rt1015->sysclk_src == RT1015_SCLK_S_PLL) | |
| return 1; | |
| else | |
| return 0; | |
| } | |
| static int r1015_dac_event(struct snd_soc_dapm_widget *w, | |
| struct snd_kcontrol *kcontrol, int event) | |
| { | |
| struct snd_soc_component *component = | |
| snd_soc_dapm_to_component(w->dapm); | |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); | |
| switch (event) { | |
| case SND_SOC_DAPM_PRE_PMU: | |
| rt1015->dac_is_used = 1; | |
| if (rt1015->bypass_boost == RT1015_Enable_Boost) { | |
| snd_soc_component_write(component, | |
| RT1015_SYS_RST1, 0x05f7); | |
| snd_soc_component_write(component, | |
| RT1015_SYS_RST2, 0x0b0a); | |
| snd_soc_component_write(component, | |
| RT1015_GAT_BOOST, 0xacfe); | |
| snd_soc_component_write(component, | |
| RT1015_PWR9, 0xaa00); | |
| snd_soc_component_write(component, | |
| RT1015_GAT_BOOST, 0xecfe); | |
| } else { | |
| snd_soc_component_write(component, | |
| 0x032d, 0xaa60); | |
| snd_soc_component_write(component, | |
| RT1015_SYS_RST1, 0x05f7); | |
| snd_soc_component_write(component, | |
| RT1015_SYS_RST2, 0x0b0a); | |
| snd_soc_component_write(component, | |
| RT1015_PWR_STATE_CTRL, 0x008e); | |
| } | |
| break; | |
| case SND_SOC_DAPM_POST_PMD: | |
| if (rt1015->bypass_boost == RT1015_Enable_Boost) { | |
| snd_soc_component_write(component, | |
| RT1015_PWR9, 0xa800); | |
| snd_soc_component_write(component, | |
| RT1015_SYS_RST1, 0x05f5); | |
| snd_soc_component_write(component, | |
| RT1015_SYS_RST2, 0x0b9a); | |
| } else { | |
| snd_soc_component_write(component, | |
| 0x032d, 0xaa60); | |
| snd_soc_component_write(component, | |
| RT1015_PWR_STATE_CTRL, 0x0088); | |
| snd_soc_component_write(component, | |
| RT1015_SYS_RST1, 0x05f5); | |
| snd_soc_component_write(component, | |
| RT1015_SYS_RST2, 0x0b9a); | |
| } | |
| rt1015->dac_is_used = 0; | |
| break; | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| static int rt1015_amp_drv_event(struct snd_soc_dapm_widget *w, | |
| struct snd_kcontrol *kcontrol, int event) | |
| { | |
| struct snd_soc_component *component = | |
| snd_soc_dapm_to_component(w->dapm); | |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); | |
| unsigned int ret, ret2; | |
| switch (event) { | |
| case SND_SOC_DAPM_PRE_PMU: | |
| ret = snd_soc_component_read(component, RT1015_CLK_DET); | |
| ret2 = snd_soc_component_read(component, RT1015_SPK_DC_DETECT1); | |
| if (!((ret >> 15) & 0x1)) { | |
| snd_soc_component_update_bits(component, RT1015_CLK_DET, | |
| RT1015_EN_BCLK_DET_MASK, RT1015_EN_BCLK_DET); | |
| dev_dbg(component->dev, "BCLK Detection Enabled.\n"); | |
| } | |
| if (!((ret2 >> 12) & 0x1)) { | |
| snd_soc_component_update_bits(component, RT1015_SPK_DC_DETECT1, | |
| RT1015_EN_CLA_D_DC_DET_MASK, RT1015_EN_CLA_D_DC_DET); | |
| dev_dbg(component->dev, "Class-D DC Detection Enabled.\n"); | |
| } | |
| break; | |
| case SND_SOC_DAPM_POST_PMU: | |
| msleep(rt1015->pdata.power_up_delay_ms); | |
| break; | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| static const struct snd_soc_dapm_widget rt1015_dapm_widgets[] = { | |
| SND_SOC_DAPM_SUPPLY("PLL", RT1015_PWR1, RT1015_PWR_PLL_BIT, 0, | |
| NULL, 0), | |
| SND_SOC_DAPM_AIF_IN("AIFRX", "AIF Playback", 0, SND_SOC_NOPM, 0, 0), | |
| SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, | |
| r1015_dac_event, SND_SOC_DAPM_PRE_PMU | | |
| SND_SOC_DAPM_POST_PMD), | |
| SND_SOC_DAPM_OUT_DRV_E("Amp Drv", SND_SOC_NOPM, 0, 0, NULL, 0, | |
| rt1015_amp_drv_event, SND_SOC_DAPM_PRE_PMU | | |
| SND_SOC_DAPM_POST_PMU), | |
| SND_SOC_DAPM_OUTPUT("SPO"), | |
| }; | |
| static const struct snd_soc_dapm_route rt1015_dapm_routes[] = { | |
| { "DAC", NULL, "AIFRX" }, | |
| { "DAC", NULL, "PLL", rt1015_is_sys_clk_from_pll}, | |
| { "Amp Drv", NULL, "DAC" }, | |
| { "SPO", NULL, "Amp Drv" }, | |
| }; | |
| static int rt1015_hw_params(struct snd_pcm_substream *substream, | |
| struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) | |
| { | |
| struct snd_soc_component *component = dai->component; | |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); | |
| int pre_div, frame_size, lrck; | |
| unsigned int val_len = 0; | |
| lrck = params_rate(params); | |
| pre_div = rl6231_get_clk_info(rt1015->sysclk, lrck); | |
| if (pre_div < 0) { | |
| dev_err(component->dev, "Unsupported clock rate\n"); | |
| return -EINVAL; | |
| } | |
| frame_size = snd_soc_params_to_frame_size(params); | |
| if (frame_size < 0) { | |
| dev_err(component->dev, "Unsupported frame size: %d\n", | |
| frame_size); | |
| return -EINVAL; | |
| } | |
| dev_dbg(component->dev, "pre_div is %d for iis %d\n", pre_div, dai->id); | |
| dev_dbg(component->dev, "lrck is %dHz and pre_div is %d for iis %d\n", | |
| lrck, pre_div, dai->id); | |
| switch (params_width(params)) { | |
| case 16: | |
| break; | |
| case 20: | |
| val_len = RT1015_I2S_DL_20; | |
| break; | |
| case 24: | |
| val_len = RT1015_I2S_DL_24; | |
| break; | |
| case 8: | |
| val_len = RT1015_I2S_DL_8; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| snd_soc_component_update_bits(component, RT1015_TDM_MASTER, | |
| RT1015_I2S_DL_MASK, val_len); | |
| snd_soc_component_update_bits(component, RT1015_CLK2, | |
| RT1015_FS_PD_MASK, pre_div << RT1015_FS_PD_SFT); | |
| return 0; | |
| } | |
| static int rt1015_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) | |
| { | |
| struct snd_soc_component *component = dai->component; | |
| unsigned int reg_val = 0, reg_val2 = 0; | |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { | |
| case SND_SOC_DAIFMT_CBP_CFP: | |
| reg_val |= RT1015_TCON_TDM_MS_M; | |
| break; | |
| case SND_SOC_DAIFMT_CBC_CFC: | |
| reg_val |= RT1015_TCON_TDM_MS_S; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { | |
| case SND_SOC_DAIFMT_NB_NF: | |
| break; | |
| case SND_SOC_DAIFMT_IB_NF: | |
| reg_val2 |= RT1015_TDM_INV_BCLK; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { | |
| case SND_SOC_DAIFMT_I2S: | |
| break; | |
| case SND_SOC_DAIFMT_LEFT_J: | |
| reg_val |= RT1015_I2S_M_DF_LEFT; | |
| break; | |
| case SND_SOC_DAIFMT_DSP_A: | |
| reg_val |= RT1015_I2S_M_DF_PCM_A; | |
| break; | |
| case SND_SOC_DAIFMT_DSP_B: | |
| reg_val |= RT1015_I2S_M_DF_PCM_B; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| snd_soc_component_update_bits(component, RT1015_TDM_MASTER, | |
| RT1015_TCON_TDM_MS_MASK | RT1015_I2S_M_DF_MASK, | |
| reg_val); | |
| snd_soc_component_update_bits(component, RT1015_TDM1_1, | |
| RT1015_TDM_INV_BCLK_MASK, reg_val2); | |
| return 0; | |
| } | |
| static int rt1015_set_component_sysclk(struct snd_soc_component *component, | |
| int clk_id, int source, unsigned int freq, int dir) | |
| { | |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); | |
| unsigned int reg_val = 0; | |
| if (freq == rt1015->sysclk && clk_id == rt1015->sysclk_src) | |
| return 0; | |
| switch (clk_id) { | |
| case RT1015_SCLK_S_MCLK: | |
| reg_val |= RT1015_CLK_SYS_PRE_SEL_MCLK; | |
| break; | |
| case RT1015_SCLK_S_PLL: | |
| reg_val |= RT1015_CLK_SYS_PRE_SEL_PLL; | |
| break; | |
| default: | |
| dev_err(component->dev, "Invalid clock id (%d)\n", clk_id); | |
| return -EINVAL; | |
| } | |
| rt1015->sysclk = freq; | |
| rt1015->sysclk_src = clk_id; | |
| dev_dbg(component->dev, "Sysclk is %dHz and clock id is %d\n", | |
| freq, clk_id); | |
| snd_soc_component_update_bits(component, RT1015_CLK2, | |
| RT1015_CLK_SYS_PRE_SEL_MASK, reg_val); | |
| return 0; | |
| } | |
| static int rt1015_set_component_pll(struct snd_soc_component *component, | |
| int pll_id, int source, unsigned int freq_in, | |
| unsigned int freq_out) | |
| { | |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); | |
| struct rl6231_pll_code pll_code; | |
| int ret; | |
| if (!freq_in || !freq_out) { | |
| dev_dbg(component->dev, "PLL disabled\n"); | |
| rt1015->pll_in = 0; | |
| rt1015->pll_out = 0; | |
| return 0; | |
| } | |
| if (source == rt1015->pll_src && freq_in == rt1015->pll_in && | |
| freq_out == rt1015->pll_out) | |
| return 0; | |
| switch (source) { | |
| case RT1015_PLL_S_MCLK: | |
| snd_soc_component_update_bits(component, RT1015_CLK2, | |
| RT1015_PLL_SEL_MASK, RT1015_PLL_SEL_PLL_SRC2); | |
| break; | |
| case RT1015_PLL_S_BCLK: | |
| snd_soc_component_update_bits(component, RT1015_CLK2, | |
| RT1015_PLL_SEL_MASK, RT1015_PLL_SEL_BCLK); | |
| break; | |
| default: | |
| dev_err(component->dev, "Unknown PLL Source %d\n", source); | |
| return -EINVAL; | |
| } | |
| ret = rl6231_pll_calc(freq_in, freq_out, &pll_code); | |
| if (ret < 0) { | |
| dev_err(component->dev, "Unsupported input clock %d\n", freq_in); | |
| return ret; | |
| } | |
| dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n", | |
| pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code), | |
| pll_code.n_code, pll_code.k_code); | |
| snd_soc_component_write(component, RT1015_PLL1, | |
| ((pll_code.m_bp ? 0 : pll_code.m_code) << RT1015_PLL_M_SFT) | | |
| (pll_code.m_bp << RT1015_PLL_M_BP_SFT) | | |
| pll_code.n_code); | |
| snd_soc_component_write(component, RT1015_PLL2, | |
| pll_code.k_code); | |
| rt1015->pll_in = freq_in; | |
| rt1015->pll_out = freq_out; | |
| rt1015->pll_src = source; | |
| return 0; | |
| } | |
| static int rt1015_set_tdm_slot(struct snd_soc_dai *dai, | |
| unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width) | |
| { | |
| struct snd_soc_component *component = dai->component; | |
| unsigned int val = 0, rx_slotnum, tx_slotnum; | |
| int ret = 0, first_bit; | |
| switch (slots) { | |
| case 2: | |
| val |= RT1015_I2S_TX_2CH; | |
| break; | |
| case 4: | |
| val |= RT1015_I2S_TX_4CH; | |
| break; | |
| case 6: | |
| val |= RT1015_I2S_TX_6CH; | |
| break; | |
| case 8: | |
| val |= RT1015_I2S_TX_8CH; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| goto _set_tdm_err_; | |
| } | |
| switch (slot_width) { | |
| case 16: | |
| val |= RT1015_I2S_CH_TX_LEN_16B; | |
| break; | |
| case 20: | |
| val |= RT1015_I2S_CH_TX_LEN_20B; | |
| break; | |
| case 24: | |
| val |= RT1015_I2S_CH_TX_LEN_24B; | |
| break; | |
| case 32: | |
| val |= RT1015_I2S_CH_TX_LEN_32B; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| goto _set_tdm_err_; | |
| } | |
| /* Rx slot configuration */ | |
| rx_slotnum = hweight_long(rx_mask); | |
| if (rx_slotnum != 1) { | |
| ret = -EINVAL; | |
| dev_err(component->dev, "too many rx slots or zero slot\n"); | |
| goto _set_tdm_err_; | |
| } | |
| /* This is an assumption that the system sends stereo audio to the amplifier typically. | |
| * And the stereo audio is placed in slot 0/2/4/6 as the starting slot. | |
| * The users could select the channel from L/R/L+R by "Mono LR Select" control. | |
| */ | |
| first_bit = __ffs(rx_mask); | |
| switch (first_bit) { | |
| case 0: | |
| case 2: | |
| case 4: | |
| case 6: | |
| snd_soc_component_update_bits(component, | |
| RT1015_TDM1_4, | |
| RT1015_TDM_I2S_TX_L_DAC1_1_MASK | | |
| RT1015_TDM_I2S_TX_R_DAC1_1_MASK, | |
| (first_bit << RT1015_TDM_I2S_TX_L_DAC1_1_SFT) | | |
| ((first_bit+1) << RT1015_TDM_I2S_TX_R_DAC1_1_SFT)); | |
| break; | |
| case 1: | |
| case 3: | |
| case 5: | |
| case 7: | |
| snd_soc_component_update_bits(component, | |
| RT1015_TDM1_4, | |
| RT1015_TDM_I2S_TX_L_DAC1_1_MASK | | |
| RT1015_TDM_I2S_TX_R_DAC1_1_MASK, | |
| ((first_bit-1) << RT1015_TDM_I2S_TX_L_DAC1_1_SFT) | | |
| (first_bit << RT1015_TDM_I2S_TX_R_DAC1_1_SFT)); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| goto _set_tdm_err_; | |
| } | |
| /* Tx slot configuration */ | |
| tx_slotnum = hweight_long(tx_mask); | |
| if (tx_slotnum) { | |
| ret = -EINVAL; | |
| dev_err(component->dev, "doesn't need to support tx slots\n"); | |
| goto _set_tdm_err_; | |
| } | |
| snd_soc_component_update_bits(component, RT1015_TDM1_1, | |
| RT1015_I2S_CH_TX_MASK | RT1015_I2S_CH_RX_MASK | | |
| RT1015_I2S_CH_TX_LEN_MASK | RT1015_I2S_CH_RX_LEN_MASK, val); | |
| _set_tdm_err_: | |
| return ret; | |
| } | |
| static int rt1015_probe(struct snd_soc_component *component) | |
| { | |
| struct rt1015_priv *rt1015 = | |
| snd_soc_component_get_drvdata(component); | |
| rt1015->component = component; | |
| return 0; | |
| } | |
| static void rt1015_remove(struct snd_soc_component *component) | |
| { | |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); | |
| regmap_write(rt1015->regmap, RT1015_RESET, 0); | |
| } | |
| #define RT1015_STEREO_RATES SNDRV_PCM_RATE_8000_192000 | |
| #define RT1015_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ | |
| SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8) | |
| static const struct snd_soc_dai_ops rt1015_aif_dai_ops = { | |
| .hw_params = rt1015_hw_params, | |
| .set_fmt = rt1015_set_dai_fmt, | |
| .set_tdm_slot = rt1015_set_tdm_slot, | |
| }; | |
| static struct snd_soc_dai_driver rt1015_dai[] = { | |
| { | |
| .name = "rt1015-aif", | |
| .id = 0, | |
| .playback = { | |
| .stream_name = "AIF Playback", | |
| .channels_min = 1, | |
| .channels_max = 4, | |
| .rates = RT1015_STEREO_RATES, | |
| .formats = RT1015_FORMATS, | |
| }, | |
| .ops = &rt1015_aif_dai_ops, | |
| } | |
| }; | |
| #ifdef CONFIG_PM | |
| static int rt1015_suspend(struct snd_soc_component *component) | |
| { | |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); | |
| regcache_cache_only(rt1015->regmap, true); | |
| regcache_mark_dirty(rt1015->regmap); | |
| return 0; | |
| } | |
| static int rt1015_resume(struct snd_soc_component *component) | |
| { | |
| struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); | |
| regcache_cache_only(rt1015->regmap, false); | |
| regcache_sync(rt1015->regmap); | |
| if (rt1015->cali_done) | |
| rt1015_calibrate(rt1015); | |
| return 0; | |
| } | |
| #else | |
| #define rt1015_suspend NULL | |
| #define rt1015_resume NULL | |
| #endif | |
| static const struct snd_soc_component_driver soc_component_dev_rt1015 = { | |
| .probe = rt1015_probe, | |
| .remove = rt1015_remove, | |
| .suspend = rt1015_suspend, | |
| .resume = rt1015_resume, | |
| .controls = rt1015_snd_controls, | |
| .num_controls = ARRAY_SIZE(rt1015_snd_controls), | |
| .dapm_widgets = rt1015_dapm_widgets, | |
| .num_dapm_widgets = ARRAY_SIZE(rt1015_dapm_widgets), | |
| .dapm_routes = rt1015_dapm_routes, | |
| .num_dapm_routes = ARRAY_SIZE(rt1015_dapm_routes), | |
| .set_sysclk = rt1015_set_component_sysclk, | |
| .set_pll = rt1015_set_component_pll, | |
| .use_pmdown_time = 1, | |
| .endianness = 1, | |
| }; | |
| static const struct regmap_config rt1015_regmap = { | |
| .reg_bits = 16, | |
| .val_bits = 16, | |
| .max_register = RT1015_S_BST_TIMING_INTER36, | |
| .volatile_reg = rt1015_volatile_register, | |
| .readable_reg = rt1015_readable_register, | |
| .cache_type = REGCACHE_RBTREE, | |
| .reg_defaults = rt1015_reg, | |
| .num_reg_defaults = ARRAY_SIZE(rt1015_reg), | |
| }; | |
| static const struct i2c_device_id rt1015_i2c_id[] = { | |
| { .name = "rt1015" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, rt1015_i2c_id); | |
| #if defined(CONFIG_OF) | |
| static const struct of_device_id rt1015_of_match[] = { | |
| { .compatible = "realtek,rt1015", }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, rt1015_of_match); | |
| #endif | |
| #ifdef CONFIG_ACPI | |
| static const struct acpi_device_id rt1015_acpi_match[] = { | |
| { "10EC1015" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(acpi, rt1015_acpi_match); | |
| #endif | |
| static void rt1015_parse_dt(struct rt1015_priv *rt1015, struct device *dev) | |
| { | |
| device_property_read_u32(dev, "realtek,power-up-delay-ms", | |
| &rt1015->pdata.power_up_delay_ms); | |
| } | |
| static int rt1015_i2c_probe(struct i2c_client *i2c) | |
| { | |
| struct rt1015_platform_data *pdata = dev_get_platdata(&i2c->dev); | |
| struct rt1015_priv *rt1015; | |
| int ret; | |
| unsigned int val; | |
| rt1015 = devm_kzalloc(&i2c->dev, sizeof(*rt1015), GFP_KERNEL); | |
| if (!rt1015) | |
| return -ENOMEM; | |
| i2c_set_clientdata(i2c, rt1015); | |
| rt1015->pdata = i2s_default_platform_data; | |
| if (pdata) | |
| rt1015->pdata = *pdata; | |
| else | |
| rt1015_parse_dt(rt1015, &i2c->dev); | |
| rt1015->regmap = devm_regmap_init_i2c(i2c, &rt1015_regmap); | |
| if (IS_ERR(rt1015->regmap)) { | |
| ret = PTR_ERR(rt1015->regmap); | |
| dev_err(&i2c->dev, "Failed to allocate register map: %d\n", | |
| ret); | |
| return ret; | |
| } | |
| ret = regmap_read(rt1015->regmap, RT1015_DEVICE_ID, &val); | |
| if (ret) { | |
| dev_err(&i2c->dev, | |
| "Failed to read device register: %d\n", ret); | |
| return ret; | |
| } else if ((val != RT1015_DEVICE_ID_VAL) && | |
| (val != RT1015_DEVICE_ID_VAL2)) { | |
| dev_err(&i2c->dev, | |
| "Device with ID register %x is not rt1015\n", val); | |
| return -ENODEV; | |
| } | |
| return devm_snd_soc_register_component(&i2c->dev, | |
| &soc_component_dev_rt1015, | |
| rt1015_dai, ARRAY_SIZE(rt1015_dai)); | |
| } | |
| static void rt1015_i2c_shutdown(struct i2c_client *client) | |
| { | |
| struct rt1015_priv *rt1015 = i2c_get_clientdata(client); | |
| regmap_write(rt1015->regmap, RT1015_RESET, 0); | |
| } | |
| static struct i2c_driver rt1015_i2c_driver = { | |
| .driver = { | |
| .name = "rt1015", | |
| .of_match_table = of_match_ptr(rt1015_of_match), | |
| .acpi_match_table = ACPI_PTR(rt1015_acpi_match), | |
| }, | |
| .probe = rt1015_i2c_probe, | |
| .shutdown = rt1015_i2c_shutdown, | |
| .id_table = rt1015_i2c_id, | |
| }; | |
| module_i2c_driver(rt1015_i2c_driver); | |
| MODULE_DESCRIPTION("ASoC RT1015 driver"); | |
| MODULE_AUTHOR("Jack Yu <jack.yu@realtek.com>"); | |
| MODULE_LICENSE("GPL v2"); |