| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * es8316.c -- es8316 ALSA SoC audio driver | |
| * Copyright Everest Semiconductor Co.,Ltd | |
| * | |
| * Authors: David Yang <yangxiaohua@everest-semi.com>, | |
| * Daniel Drake <drake@endlessm.com> | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/acpi.h> | |
| #include <linux/cleanup.h> | |
| #include <linux/clk.h> | |
| #include <linux/delay.h> | |
| #include <linux/i2c.h> | |
| #include <linux/mutex.h> | |
| #include <linux/regmap.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <sound/pcm.h> | |
| #include <sound/pcm_params.h> | |
| #include <sound/soc.h> | |
| #include <sound/soc-dapm.h> | |
| #include <sound/tlv.h> | |
| #include <sound/jack.h> | |
| #include "es8316.h" | |
| /* In slave mode at single speed, the codec is documented as accepting 5 | |
| * MCLK/LRCK ratios, but we also add ratio 400, which is commonly used on | |
| * Intel Cherry Trail platforms (19.2MHz MCLK, 48kHz LRCK). | |
| */ | |
| static const unsigned int supported_mclk_lrck_ratios[] = { | |
| 256, 384, 400, 500, 512, 768, 1024 | |
| }; | |
| static const char * const es8316_supply_names[] = { | |
| "avdd", | |
| "cpvdd", | |
| "dvdd", | |
| "pvdd", | |
| }; | |
| struct es8316_priv { | |
| struct mutex lock; | |
| struct clk *mclk; | |
| struct regmap *regmap; | |
| struct snd_soc_component *component; | |
| struct snd_soc_jack *jack; | |
| int irq; | |
| unsigned int sysclk; | |
| /* ES83xx supports halving the MCLK so it supports twice as many rates | |
| */ | |
| unsigned int allowed_rates[ARRAY_SIZE(supported_mclk_lrck_ratios) * 2]; | |
| struct snd_pcm_hw_constraint_list sysclk_constraints; | |
| bool jd_inverted; | |
| }; | |
| /* | |
| * ES8316 controls | |
| */ | |
| static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(dac_vol_tlv, -9600, 50, 1); | |
| static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(adc_vol_tlv, -9600, 50, 1); | |
| static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(alc_max_gain_tlv, -650, 150, 0); | |
| static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(alc_min_gain_tlv, -1200, 150, 0); | |
| static const SNDRV_CTL_TLVD_DECLARE_DB_RANGE(alc_target_tlv, | |
| 0, 10, TLV_DB_SCALE_ITEM(-1650, 150, 0), | |
| 11, 11, TLV_DB_SCALE_ITEM(-150, 0, 0), | |
| ); | |
| static const SNDRV_CTL_TLVD_DECLARE_DB_RANGE(hpmixer_gain_tlv, | |
| 0, 4, TLV_DB_SCALE_ITEM(-1200, 150, 0), | |
| 8, 11, TLV_DB_SCALE_ITEM(-450, 150, 0), | |
| ); | |
| static const SNDRV_CTL_TLVD_DECLARE_DB_RANGE(adc_pga_gain_tlv, | |
| 0, 0, TLV_DB_SCALE_ITEM(-350, 0, 0), | |
| 1, 1, TLV_DB_SCALE_ITEM(0, 0, 0), | |
| 2, 2, TLV_DB_SCALE_ITEM(250, 0, 0), | |
| 3, 3, TLV_DB_SCALE_ITEM(450, 0, 0), | |
| 4, 7, TLV_DB_SCALE_ITEM(700, 300, 0), | |
| 8, 10, TLV_DB_SCALE_ITEM(1800, 300, 0), | |
| ); | |
| static const SNDRV_CTL_TLVD_DECLARE_DB_RANGE(hpout_vol_tlv, | |
| 0, 0, TLV_DB_SCALE_ITEM(-4800, 0, 0), | |
| 1, 3, TLV_DB_SCALE_ITEM(-2400, 1200, 0), | |
| ); | |
| static const char * const ng_type_txt[] = | |
| { "Constant PGA Gain", "Mute ADC Output" }; | |
| static const struct soc_enum ng_type = | |
| SOC_ENUM_SINGLE(ES8316_ADC_ALC_NG, 6, 2, ng_type_txt); | |
| static const char * const adcpol_txt[] = { "Normal", "Invert" }; | |
| static const struct soc_enum adcpol = | |
| SOC_ENUM_SINGLE(ES8316_ADC_MUTE, 1, 2, adcpol_txt); | |
| static const char *const dacpol_txt[] = | |
| { "Normal", "R Invert", "L Invert", "L + R Invert" }; | |
| static const struct soc_enum dacpol = | |
| SOC_ENUM_SINGLE(ES8316_DAC_SET1, 0, 4, dacpol_txt); | |
| static const struct snd_kcontrol_new es8316_snd_controls[] = { | |
| SOC_DOUBLE_TLV("Headphone Playback Volume", ES8316_CPHP_ICAL_VOL, | |
| 4, 0, 3, 1, hpout_vol_tlv), | |
| SOC_DOUBLE_TLV("Headphone Mixer Volume", ES8316_HPMIX_VOL, | |
| 4, 0, 11, 0, hpmixer_gain_tlv), | |
| SOC_ENUM("Playback Polarity", dacpol), | |
| SOC_DOUBLE_R_TLV("DAC Playback Volume", ES8316_DAC_VOLL, | |
| ES8316_DAC_VOLR, 0, 0xc0, 1, dac_vol_tlv), | |
| SOC_SINGLE("DAC Soft Ramp Switch", ES8316_DAC_SET1, 4, 1, 1), | |
| SOC_SINGLE("DAC Soft Ramp Rate", ES8316_DAC_SET1, 2, 3, 0), | |
| SOC_SINGLE("DAC Notch Filter Switch", ES8316_DAC_SET2, 6, 1, 0), | |
| SOC_SINGLE("DAC Double Fs Switch", ES8316_DAC_SET2, 7, 1, 0), | |
| SOC_SINGLE("DAC Stereo Enhancement", ES8316_DAC_SET3, 0, 7, 0), | |
| SOC_SINGLE("DAC Mono Mix Switch", ES8316_DAC_SET3, 3, 1, 0), | |
| SOC_ENUM("Capture Polarity", adcpol), | |
| SOC_SINGLE("Mic Boost Switch", ES8316_ADC_D2SEPGA, 0, 1, 0), | |
| SOC_SINGLE_TLV("ADC Capture Volume", ES8316_ADC_VOLUME, | |
| 0, 0xc0, 1, adc_vol_tlv), | |
| SOC_SINGLE_TLV("ADC PGA Gain Volume", ES8316_ADC_PGAGAIN, | |
| 4, 10, 0, adc_pga_gain_tlv), | |
| SOC_SINGLE("ADC Soft Ramp Switch", ES8316_ADC_MUTE, 4, 1, 0), | |
| SOC_SINGLE("ADC Double Fs Switch", ES8316_ADC_DMIC, 4, 1, 0), | |
| SOC_SINGLE("ALC Capture Switch", ES8316_ADC_ALC1, 6, 1, 0), | |
| SOC_SINGLE_TLV("ALC Capture Max Volume", ES8316_ADC_ALC1, 0, 28, 0, | |
| alc_max_gain_tlv), | |
| SOC_SINGLE_TLV("ALC Capture Min Volume", ES8316_ADC_ALC2, 0, 28, 0, | |
| alc_min_gain_tlv), | |
| SOC_SINGLE_TLV("ALC Capture Target Volume", ES8316_ADC_ALC3, 4, 11, 0, | |
| alc_target_tlv), | |
| SOC_SINGLE("ALC Capture Hold Time", ES8316_ADC_ALC3, 0, 10, 0), | |
| SOC_SINGLE("ALC Capture Decay Time", ES8316_ADC_ALC4, 4, 10, 0), | |
| SOC_SINGLE("ALC Capture Attack Time", ES8316_ADC_ALC4, 0, 10, 0), | |
| SOC_SINGLE("ALC Capture Noise Gate Switch", ES8316_ADC_ALC_NG, | |
| 5, 1, 0), | |
| SOC_SINGLE("ALC Capture Noise Gate Threshold", ES8316_ADC_ALC_NG, | |
| 0, 31, 0), | |
| SOC_ENUM("ALC Capture Noise Gate Type", ng_type), | |
| }; | |
| /* Analog Input Mux */ | |
| static const char * const es8316_analog_in_txt[] = { | |
| "lin1-rin1", | |
| "lin2-rin2", | |
| "lin1-rin1 with 20db Boost", | |
| "lin2-rin2 with 20db Boost" | |
| }; | |
| static const unsigned int es8316_analog_in_values[] = { 0, 1, 2, 3 }; | |
| static const struct soc_enum es8316_analog_input_enum = | |
| SOC_VALUE_ENUM_SINGLE(ES8316_ADC_PDN_LINSEL, 4, 3, | |
| ARRAY_SIZE(es8316_analog_in_txt), | |
| es8316_analog_in_txt, | |
| es8316_analog_in_values); | |
| static const struct snd_kcontrol_new es8316_analog_in_mux_controls = | |
| SOC_DAPM_ENUM("Route", es8316_analog_input_enum); | |
| static const char * const es8316_dmic_txt[] = { | |
| "dmic disable", | |
| "dmic data at high level", | |
| "dmic data at low level", | |
| }; | |
| static const unsigned int es8316_dmic_values[] = { 0, 2, 3 }; | |
| static const struct soc_enum es8316_dmic_src_enum = | |
| SOC_VALUE_ENUM_SINGLE(ES8316_ADC_DMIC, 0, 3, | |
| ARRAY_SIZE(es8316_dmic_txt), | |
| es8316_dmic_txt, | |
| es8316_dmic_values); | |
| static const struct snd_kcontrol_new es8316_dmic_src_controls = | |
| SOC_DAPM_ENUM("Route", es8316_dmic_src_enum); | |
| /* hp mixer mux */ | |
| static const char * const es8316_hpmux_texts[] = { | |
| "lin1-rin1", | |
| "lin2-rin2", | |
| "lin-rin with Boost", | |
| "lin-rin with Boost and PGA" | |
| }; | |
| static SOC_ENUM_SINGLE_DECL(es8316_left_hpmux_enum, ES8316_HPMIX_SEL, | |
| 4, es8316_hpmux_texts); | |
| static const struct snd_kcontrol_new es8316_left_hpmux_controls = | |
| SOC_DAPM_ENUM("Route", es8316_left_hpmux_enum); | |
| static SOC_ENUM_SINGLE_DECL(es8316_right_hpmux_enum, ES8316_HPMIX_SEL, | |
| 0, es8316_hpmux_texts); | |
| static const struct snd_kcontrol_new es8316_right_hpmux_controls = | |
| SOC_DAPM_ENUM("Route", es8316_right_hpmux_enum); | |
| /* headphone Output Mixer */ | |
| static const struct snd_kcontrol_new es8316_out_left_mix[] = { | |
| SOC_DAPM_SINGLE("LLIN Switch", ES8316_HPMIX_SWITCH, 6, 1, 0), | |
| SOC_DAPM_SINGLE("Left DAC Switch", ES8316_HPMIX_SWITCH, 7, 1, 0), | |
| }; | |
| static const struct snd_kcontrol_new es8316_out_right_mix[] = { | |
| SOC_DAPM_SINGLE("RLIN Switch", ES8316_HPMIX_SWITCH, 2, 1, 0), | |
| SOC_DAPM_SINGLE("Right DAC Switch", ES8316_HPMIX_SWITCH, 3, 1, 0), | |
| }; | |
| /* DAC data source mux */ | |
| static const char * const es8316_dacsrc_texts[] = { | |
| "LDATA TO LDAC, RDATA TO RDAC", | |
| "LDATA TO LDAC, LDATA TO RDAC", | |
| "RDATA TO LDAC, RDATA TO RDAC", | |
| "RDATA TO LDAC, LDATA TO RDAC", | |
| }; | |
| static SOC_ENUM_SINGLE_DECL(es8316_dacsrc_mux_enum, ES8316_DAC_SET1, | |
| 6, es8316_dacsrc_texts); | |
| static const struct snd_kcontrol_new es8316_dacsrc_mux_controls = | |
| SOC_DAPM_ENUM("Route", es8316_dacsrc_mux_enum); | |
| static const struct snd_soc_dapm_widget es8316_dapm_widgets[] = { | |
| SND_SOC_DAPM_SUPPLY("Bias", ES8316_SYS_PDN, 3, 1, NULL, 0), | |
| SND_SOC_DAPM_SUPPLY("Analog power", ES8316_SYS_PDN, 4, 1, NULL, 0), | |
| SND_SOC_DAPM_SUPPLY("Mic Bias", ES8316_SYS_PDN, 5, 1, NULL, 0), | |
| SND_SOC_DAPM_INPUT("DMIC"), | |
| SND_SOC_DAPM_INPUT("MIC1"), | |
| SND_SOC_DAPM_INPUT("MIC2"), | |
| /* Input Mux */ | |
| SND_SOC_DAPM_MUX("Differential Mux", SND_SOC_NOPM, 0, 0, | |
| &es8316_analog_in_mux_controls), | |
| SND_SOC_DAPM_SUPPLY("ADC Vref", ES8316_SYS_PDN, 1, 1, NULL, 0), | |
| SND_SOC_DAPM_SUPPLY("ADC bias", ES8316_SYS_PDN, 2, 1, NULL, 0), | |
| SND_SOC_DAPM_SUPPLY("ADC Clock", ES8316_CLKMGR_CLKSW, 3, 0, NULL, 0), | |
| SND_SOC_DAPM_PGA("Line input PGA", ES8316_ADC_PDN_LINSEL, | |
| 7, 1, NULL, 0), | |
| SND_SOC_DAPM_ADC("Mono ADC", NULL, ES8316_ADC_PDN_LINSEL, 6, 1), | |
| SND_SOC_DAPM_MUX("Digital Mic Mux", SND_SOC_NOPM, 0, 0, | |
| &es8316_dmic_src_controls), | |
| /* Digital Interface */ | |
| SND_SOC_DAPM_AIF_OUT("I2S OUT", "I2S1 Capture", 1, | |
| ES8316_SERDATA_ADC, 6, 1), | |
| SND_SOC_DAPM_AIF_IN("I2S IN", "I2S1 Playback", 0, | |
| SND_SOC_NOPM, 0, 0), | |
| SND_SOC_DAPM_MUX("DAC Source Mux", SND_SOC_NOPM, 0, 0, | |
| &es8316_dacsrc_mux_controls), | |
| SND_SOC_DAPM_SUPPLY("DAC Vref", ES8316_SYS_PDN, 0, 1, NULL, 0), | |
| SND_SOC_DAPM_SUPPLY("DAC Clock", ES8316_CLKMGR_CLKSW, 2, 0, NULL, 0), | |
| SND_SOC_DAPM_DAC("Right DAC", NULL, ES8316_DAC_PDN, 0, 1), | |
| SND_SOC_DAPM_DAC("Left DAC", NULL, ES8316_DAC_PDN, 4, 1), | |
| /* Headphone Output Side */ | |
| SND_SOC_DAPM_MUX("Left Headphone Mux", SND_SOC_NOPM, 0, 0, | |
| &es8316_left_hpmux_controls), | |
| SND_SOC_DAPM_MUX("Right Headphone Mux", SND_SOC_NOPM, 0, 0, | |
| &es8316_right_hpmux_controls), | |
| SND_SOC_DAPM_MIXER("Left Headphone Mixer", ES8316_HPMIX_PDN, | |
| 5, 1, &es8316_out_left_mix[0], | |
| ARRAY_SIZE(es8316_out_left_mix)), | |
| SND_SOC_DAPM_MIXER("Right Headphone Mixer", ES8316_HPMIX_PDN, | |
| 1, 1, &es8316_out_right_mix[0], | |
| ARRAY_SIZE(es8316_out_right_mix)), | |
| SND_SOC_DAPM_PGA("Left Headphone Mixer Out", ES8316_HPMIX_PDN, | |
| 4, 1, NULL, 0), | |
| SND_SOC_DAPM_PGA("Right Headphone Mixer Out", ES8316_HPMIX_PDN, | |
| 0, 1, NULL, 0), | |
| SND_SOC_DAPM_OUT_DRV("Left Headphone Charge Pump", ES8316_CPHP_OUTEN, | |
| 6, 0, NULL, 0), | |
| SND_SOC_DAPM_OUT_DRV("Right Headphone Charge Pump", ES8316_CPHP_OUTEN, | |
| 2, 0, NULL, 0), | |
| SND_SOC_DAPM_SUPPLY("Headphone Charge Pump", ES8316_CPHP_PDN2, | |
| 5, 1, NULL, 0), | |
| SND_SOC_DAPM_SUPPLY("Headphone Charge Pump Clock", ES8316_CLKMGR_CLKSW, | |
| 4, 0, NULL, 0), | |
| SND_SOC_DAPM_OUT_DRV("Left Headphone Driver", ES8316_CPHP_OUTEN, | |
| 5, 0, NULL, 0), | |
| SND_SOC_DAPM_OUT_DRV("Right Headphone Driver", ES8316_CPHP_OUTEN, | |
| 1, 0, NULL, 0), | |
| SND_SOC_DAPM_SUPPLY("Headphone Out", ES8316_CPHP_PDN1, 2, 1, NULL, 0), | |
| /* pdn_Lical and pdn_Rical bits are documented as Reserved, but must | |
| * be explicitly unset in order to enable HP output | |
| */ | |
| SND_SOC_DAPM_SUPPLY("Left Headphone ical", ES8316_CPHP_ICAL_VOL, | |
| 7, 1, NULL, 0), | |
| SND_SOC_DAPM_SUPPLY("Right Headphone ical", ES8316_CPHP_ICAL_VOL, | |
| 3, 1, NULL, 0), | |
| SND_SOC_DAPM_OUTPUT("HPOL"), | |
| SND_SOC_DAPM_OUTPUT("HPOR"), | |
| }; | |
| static const struct snd_soc_dapm_route es8316_dapm_routes[] = { | |
| /* Recording */ | |
| {"MIC1", NULL, "Mic Bias"}, | |
| {"MIC2", NULL, "Mic Bias"}, | |
| {"MIC1", NULL, "Bias"}, | |
| {"MIC2", NULL, "Bias"}, | |
| {"MIC1", NULL, "Analog power"}, | |
| {"MIC2", NULL, "Analog power"}, | |
| {"Differential Mux", "lin1-rin1", "MIC1"}, | |
| {"Differential Mux", "lin2-rin2", "MIC2"}, | |
| {"Line input PGA", NULL, "Differential Mux"}, | |
| {"Mono ADC", NULL, "ADC Clock"}, | |
| {"Mono ADC", NULL, "ADC Vref"}, | |
| {"Mono ADC", NULL, "ADC bias"}, | |
| {"Mono ADC", NULL, "Line input PGA"}, | |
| /* It's not clear why, but to avoid recording only silence, | |
| * the DAC clock must be running for the ADC to work. | |
| */ | |
| {"Mono ADC", NULL, "DAC Clock"}, | |
| {"Digital Mic Mux", "dmic disable", "Mono ADC"}, | |
| {"I2S OUT", NULL, "Digital Mic Mux"}, | |
| /* Playback */ | |
| {"DAC Source Mux", "LDATA TO LDAC, RDATA TO RDAC", "I2S IN"}, | |
| {"Left DAC", NULL, "DAC Clock"}, | |
| {"Right DAC", NULL, "DAC Clock"}, | |
| {"Left DAC", NULL, "DAC Vref"}, | |
| {"Right DAC", NULL, "DAC Vref"}, | |
| {"Left DAC", NULL, "DAC Source Mux"}, | |
| {"Right DAC", NULL, "DAC Source Mux"}, | |
| {"Left Headphone Mux", "lin-rin with Boost and PGA", "Line input PGA"}, | |
| {"Right Headphone Mux", "lin-rin with Boost and PGA", "Line input PGA"}, | |
| {"Left Headphone Mixer", "LLIN Switch", "Left Headphone Mux"}, | |
| {"Left Headphone Mixer", "Left DAC Switch", "Left DAC"}, | |
| {"Right Headphone Mixer", "RLIN Switch", "Right Headphone Mux"}, | |
| {"Right Headphone Mixer", "Right DAC Switch", "Right DAC"}, | |
| {"Left Headphone Mixer Out", NULL, "Left Headphone Mixer"}, | |
| {"Right Headphone Mixer Out", NULL, "Right Headphone Mixer"}, | |
| {"Left Headphone Charge Pump", NULL, "Left Headphone Mixer Out"}, | |
| {"Right Headphone Charge Pump", NULL, "Right Headphone Mixer Out"}, | |
| {"Left Headphone Charge Pump", NULL, "Headphone Charge Pump"}, | |
| {"Right Headphone Charge Pump", NULL, "Headphone Charge Pump"}, | |
| {"Left Headphone Charge Pump", NULL, "Headphone Charge Pump Clock"}, | |
| {"Right Headphone Charge Pump", NULL, "Headphone Charge Pump Clock"}, | |
| {"Left Headphone Driver", NULL, "Left Headphone Charge Pump"}, | |
| {"Right Headphone Driver", NULL, "Right Headphone Charge Pump"}, | |
| {"HPOL", NULL, "Left Headphone Driver"}, | |
| {"HPOR", NULL, "Right Headphone Driver"}, | |
| {"HPOL", NULL, "Left Headphone ical"}, | |
| {"HPOR", NULL, "Right Headphone ical"}, | |
| {"Headphone Out", NULL, "Bias"}, | |
| {"Headphone Out", NULL, "Analog power"}, | |
| {"HPOL", NULL, "Headphone Out"}, | |
| {"HPOR", NULL, "Headphone Out"}, | |
| }; | |
| static int es8316_set_dai_sysclk(struct snd_soc_dai *codec_dai, | |
| int clk_id, unsigned int freq, int dir) | |
| { | |
| struct snd_soc_component *component = codec_dai->component; | |
| struct es8316_priv *es8316 = snd_soc_component_get_drvdata(component); | |
| int i, ret; | |
| int count = 0; | |
| es8316->sysclk = freq; | |
| es8316->sysclk_constraints.list = NULL; | |
| es8316->sysclk_constraints.count = 0; | |
| if (freq == 0) | |
| return 0; | |
| ret = clk_set_rate(es8316->mclk, freq); | |
| if (ret) | |
| return ret; | |
| /* Limit supported sample rates to ones that can be autodetected | |
| * by the codec running in slave mode. | |
| */ | |
| for (i = 0; i < ARRAY_SIZE(supported_mclk_lrck_ratios); i++) { | |
| const unsigned int ratio = supported_mclk_lrck_ratios[i]; | |
| if (freq % ratio == 0) | |
| es8316->allowed_rates[count++] = freq / ratio; | |
| /* We also check if the halved MCLK produces a valid rate | |
| * since the codec supports halving the MCLK. | |
| */ | |
| if ((freq / ratio) % 2 == 0) | |
| es8316->allowed_rates[count++] = freq / ratio / 2; | |
| } | |
| if (count) { | |
| es8316->sysclk_constraints.list = es8316->allowed_rates; | |
| es8316->sysclk_constraints.count = count; | |
| } | |
| return 0; | |
| } | |
| static int es8316_set_dai_fmt(struct snd_soc_dai *codec_dai, | |
| unsigned int fmt) | |
| { | |
| struct snd_soc_component *component = codec_dai->component; | |
| u8 serdata1 = 0; | |
| u8 serdata2 = 0; | |
| u8 clksw; | |
| u8 mask; | |
| if ((fmt & SND_SOC_DAIFMT_MASTER_MASK) == SND_SOC_DAIFMT_CBP_CFP) | |
| serdata1 |= ES8316_SERDATA1_MASTER; | |
| if ((fmt & SND_SOC_DAIFMT_FORMAT_MASK) != SND_SOC_DAIFMT_I2S) { | |
| dev_err(component->dev, "Codec driver only supports I2S format\n"); | |
| return -EINVAL; | |
| } | |
| /* Clock inversion */ | |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { | |
| case SND_SOC_DAIFMT_NB_NF: | |
| break; | |
| case SND_SOC_DAIFMT_IB_IF: | |
| serdata1 |= ES8316_SERDATA1_BCLK_INV; | |
| serdata2 |= ES8316_SERDATA2_ADCLRP; | |
| break; | |
| case SND_SOC_DAIFMT_IB_NF: | |
| serdata1 |= ES8316_SERDATA1_BCLK_INV; | |
| break; | |
| case SND_SOC_DAIFMT_NB_IF: | |
| serdata2 |= ES8316_SERDATA2_ADCLRP; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| mask = ES8316_SERDATA1_MASTER | ES8316_SERDATA1_BCLK_INV; | |
| snd_soc_component_update_bits(component, ES8316_SERDATA1, mask, serdata1); | |
| mask = ES8316_SERDATA2_FMT_MASK | ES8316_SERDATA2_ADCLRP; | |
| snd_soc_component_update_bits(component, ES8316_SERDATA_ADC, mask, serdata2); | |
| snd_soc_component_update_bits(component, ES8316_SERDATA_DAC, mask, serdata2); | |
| /* Enable BCLK and MCLK inputs in slave mode */ | |
| clksw = ES8316_CLKMGR_CLKSW_MCLK_ON | ES8316_CLKMGR_CLKSW_BCLK_ON; | |
| snd_soc_component_update_bits(component, ES8316_CLKMGR_CLKSW, clksw, clksw); | |
| return 0; | |
| } | |
| static int es8316_pcm_startup(struct snd_pcm_substream *substream, | |
| struct snd_soc_dai *dai) | |
| { | |
| struct snd_soc_component *component = dai->component; | |
| struct es8316_priv *es8316 = snd_soc_component_get_drvdata(component); | |
| if (es8316->sysclk_constraints.list) | |
| snd_pcm_hw_constraint_list(substream->runtime, 0, | |
| SNDRV_PCM_HW_PARAM_RATE, | |
| &es8316->sysclk_constraints); | |
| return 0; | |
| } | |
| static int es8316_pcm_hw_params(struct snd_pcm_substream *substream, | |
| struct snd_pcm_hw_params *params, | |
| struct snd_soc_dai *dai) | |
| { | |
| struct snd_soc_component *component = dai->component; | |
| struct es8316_priv *es8316 = snd_soc_component_get_drvdata(component); | |
| u8 wordlen = 0; | |
| u8 bclk_divider; | |
| u16 lrck_divider; | |
| int i; | |
| unsigned int clk = es8316->sysclk / 2; | |
| bool clk_valid = false; | |
| /* We will start with halved sysclk and see if we can use it | |
| * for proper clocking. This is to minimise the risk of running | |
| * the CODEC with a too high frequency. We have an SKU where | |
| * the sysclk frequency is 48Mhz and this causes the sound to be | |
| * sped up. If we can run with a halved sysclk, we will use it, | |
| * if we can't use it, then full sysclk will be used. | |
| */ | |
| do { | |
| /* Validate supported sample rates that are autodetected from MCLK */ | |
| for (i = 0; i < ARRAY_SIZE(supported_mclk_lrck_ratios); i++) { | |
| const unsigned int ratio = supported_mclk_lrck_ratios[i]; | |
| if (clk % ratio != 0) | |
| continue; | |
| if (clk / ratio == params_rate(params)) | |
| break; | |
| } | |
| if (i == ARRAY_SIZE(supported_mclk_lrck_ratios)) { | |
| if (clk == es8316->sysclk) | |
| return -EINVAL; | |
| clk = es8316->sysclk; | |
| } else { | |
| clk_valid = true; | |
| } | |
| } while (!clk_valid); | |
| if (clk != es8316->sysclk) { | |
| snd_soc_component_update_bits(component, ES8316_CLKMGR_CLKSW, | |
| ES8316_CLKMGR_CLKSW_MCLK_DIV, | |
| ES8316_CLKMGR_CLKSW_MCLK_DIV); | |
| } | |
| lrck_divider = clk / params_rate(params); | |
| bclk_divider = lrck_divider / 4; | |
| switch (params_format(params)) { | |
| case SNDRV_PCM_FORMAT_S16_LE: | |
| wordlen = ES8316_SERDATA2_LEN_16; | |
| bclk_divider /= 16; | |
| break; | |
| case SNDRV_PCM_FORMAT_S20_3LE: | |
| wordlen = ES8316_SERDATA2_LEN_20; | |
| bclk_divider /= 20; | |
| break; | |
| case SNDRV_PCM_FORMAT_S24_LE: | |
| case SNDRV_PCM_FORMAT_S24_3LE: | |
| wordlen = ES8316_SERDATA2_LEN_24; | |
| bclk_divider /= 24; | |
| break; | |
| case SNDRV_PCM_FORMAT_S32_LE: | |
| wordlen = ES8316_SERDATA2_LEN_32; | |
| bclk_divider /= 32; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| snd_soc_component_update_bits(component, ES8316_SERDATA_DAC, | |
| ES8316_SERDATA2_LEN_MASK, wordlen); | |
| snd_soc_component_update_bits(component, ES8316_SERDATA_ADC, | |
| ES8316_SERDATA2_LEN_MASK, wordlen); | |
| snd_soc_component_update_bits(component, ES8316_SERDATA1, 0x1f, bclk_divider); | |
| snd_soc_component_update_bits(component, ES8316_CLKMGR_ADCDIV1, 0x0f, lrck_divider >> 8); | |
| snd_soc_component_update_bits(component, ES8316_CLKMGR_ADCDIV2, 0xff, lrck_divider & 0xff); | |
| snd_soc_component_update_bits(component, ES8316_CLKMGR_DACDIV1, 0x0f, lrck_divider >> 8); | |
| snd_soc_component_update_bits(component, ES8316_CLKMGR_DACDIV2, 0xff, lrck_divider & 0xff); | |
| return 0; | |
| } | |
| static int es8316_mute(struct snd_soc_dai *dai, int mute, int direction) | |
| { | |
| snd_soc_component_update_bits(dai->component, ES8316_DAC_SET1, 0x20, | |
| mute ? 0x20 : 0); | |
| return 0; | |
| } | |
| #define ES8316_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ | |
| SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) | |
| static const struct snd_soc_dai_ops es8316_ops = { | |
| .startup = es8316_pcm_startup, | |
| .hw_params = es8316_pcm_hw_params, | |
| .set_fmt = es8316_set_dai_fmt, | |
| .set_sysclk = es8316_set_dai_sysclk, | |
| .mute_stream = es8316_mute, | |
| .no_capture_mute = 1, | |
| }; | |
| static struct snd_soc_dai_driver es8316_dai = { | |
| .name = "ES8316 HiFi", | |
| .playback = { | |
| .stream_name = "Playback", | |
| .channels_min = 1, | |
| .channels_max = 2, | |
| .rates = SNDRV_PCM_RATE_8000_48000, | |
| .formats = ES8316_FORMATS, | |
| }, | |
| .capture = { | |
| .stream_name = "Capture", | |
| .channels_min = 1, | |
| .channels_max = 2, | |
| .rates = SNDRV_PCM_RATE_8000_48000, | |
| .formats = ES8316_FORMATS, | |
| }, | |
| .ops = &es8316_ops, | |
| .symmetric_rate = 1, | |
| }; | |
| static void es8316_enable_micbias_for_mic_gnd_short_detect( | |
| struct snd_soc_component *component) | |
| { | |
| struct snd_soc_dapm_context *dapm = snd_soc_component_to_dapm(component); | |
| snd_soc_dapm_mutex_lock(dapm); | |
| snd_soc_dapm_force_enable_pin_unlocked(dapm, "Bias"); | |
| snd_soc_dapm_force_enable_pin_unlocked(dapm, "Analog power"); | |
| snd_soc_dapm_force_enable_pin_unlocked(dapm, "Mic Bias"); | |
| snd_soc_dapm_sync_unlocked(dapm); | |
| snd_soc_dapm_mutex_unlock(dapm); | |
| msleep(20); | |
| } | |
| static void es8316_disable_micbias_for_mic_gnd_short_detect( | |
| struct snd_soc_component *component) | |
| { | |
| struct snd_soc_dapm_context *dapm = snd_soc_component_to_dapm(component); | |
| snd_soc_dapm_mutex_lock(dapm); | |
| snd_soc_dapm_disable_pin_unlocked(dapm, "Mic Bias"); | |
| snd_soc_dapm_disable_pin_unlocked(dapm, "Analog power"); | |
| snd_soc_dapm_disable_pin_unlocked(dapm, "Bias"); | |
| snd_soc_dapm_sync_unlocked(dapm); | |
| snd_soc_dapm_mutex_unlock(dapm); | |
| } | |
| static irqreturn_t es8316_irq(int irq, void *data) | |
| { | |
| struct es8316_priv *es8316 = data; | |
| struct snd_soc_component *comp = es8316->component; | |
| unsigned int flags; | |
| guard(mutex)(&es8316->lock); | |
| regmap_read(es8316->regmap, ES8316_GPIO_FLAG, &flags); | |
| if (flags == 0x00) | |
| return IRQ_HANDLED; /* Powered-down / reset */ | |
| /* Catch spurious IRQ before set_jack is called */ | |
| if (!es8316->jack) | |
| return IRQ_HANDLED; | |
| if (es8316->jd_inverted) | |
| flags ^= ES8316_GPIO_FLAG_HP_NOT_INSERTED; | |
| dev_dbg(comp->dev, "gpio flags %#04x\n", flags); | |
| if (flags & ES8316_GPIO_FLAG_HP_NOT_INSERTED) { | |
| /* Jack removed, or spurious IRQ? */ | |
| if (es8316->jack->status & SND_JACK_MICROPHONE) | |
| es8316_disable_micbias_for_mic_gnd_short_detect(comp); | |
| if (es8316->jack->status & SND_JACK_HEADPHONE) { | |
| snd_soc_jack_report(es8316->jack, 0, | |
| SND_JACK_HEADSET | SND_JACK_BTN_0); | |
| dev_dbg(comp->dev, "jack unplugged\n"); | |
| } | |
| } else if (!(es8316->jack->status & SND_JACK_HEADPHONE)) { | |
| /* Jack inserted, determine type */ | |
| es8316_enable_micbias_for_mic_gnd_short_detect(comp); | |
| regmap_read(es8316->regmap, ES8316_GPIO_FLAG, &flags); | |
| if (es8316->jd_inverted) | |
| flags ^= ES8316_GPIO_FLAG_HP_NOT_INSERTED; | |
| dev_dbg(comp->dev, "gpio flags %#04x\n", flags); | |
| if (flags & ES8316_GPIO_FLAG_HP_NOT_INSERTED) { | |
| /* Jack unplugged underneath us */ | |
| es8316_disable_micbias_for_mic_gnd_short_detect(comp); | |
| } else if (flags & ES8316_GPIO_FLAG_GM_NOT_SHORTED) { | |
| /* Open, headset */ | |
| snd_soc_jack_report(es8316->jack, | |
| SND_JACK_HEADSET, | |
| SND_JACK_HEADSET); | |
| /* Keep mic-gnd-short detection on for button press */ | |
| } else { | |
| /* Shorted, headphones */ | |
| snd_soc_jack_report(es8316->jack, | |
| SND_JACK_HEADPHONE, | |
| SND_JACK_HEADSET); | |
| /* No longer need mic-gnd-short detection */ | |
| es8316_disable_micbias_for_mic_gnd_short_detect(comp); | |
| } | |
| } else if (es8316->jack->status & SND_JACK_MICROPHONE) { | |
| /* Interrupt while jack inserted, report button state */ | |
| if (flags & ES8316_GPIO_FLAG_GM_NOT_SHORTED) { | |
| /* Open, button release */ | |
| snd_soc_jack_report(es8316->jack, 0, SND_JACK_BTN_0); | |
| } else { | |
| /* Short, button press */ | |
| snd_soc_jack_report(es8316->jack, | |
| SND_JACK_BTN_0, | |
| SND_JACK_BTN_0); | |
| } | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static void es8316_enable_jack_detect(struct snd_soc_component *component, | |
| struct snd_soc_jack *jack) | |
| { | |
| struct es8316_priv *es8316 = snd_soc_component_get_drvdata(component); | |
| /* | |
| * Init es8316->jd_inverted here and not in the probe, as we cannot | |
| * guarantee that the bytchr-es8316 driver, which might set this | |
| * property, will probe before us. | |
| */ | |
| es8316->jd_inverted = device_property_read_bool(component->dev, | |
| "everest,jack-detect-inverted"); | |
| scoped_guard(mutex, &es8316->lock) { | |
| es8316->jack = jack; | |
| if (es8316->jack->status & SND_JACK_MICROPHONE) | |
| es8316_enable_micbias_for_mic_gnd_short_detect(component); | |
| snd_soc_component_update_bits(component, ES8316_GPIO_DEBOUNCE, | |
| ES8316_GPIO_ENABLE_INTERRUPT, | |
| ES8316_GPIO_ENABLE_INTERRUPT); | |
| } | |
| /* Enable irq and sync initial jack state */ | |
| enable_irq(es8316->irq); | |
| es8316_irq(es8316->irq, es8316); | |
| } | |
| static void es8316_disable_jack_detect(struct snd_soc_component *component) | |
| { | |
| struct es8316_priv *es8316 = snd_soc_component_get_drvdata(component); | |
| if (!es8316->jack) | |
| return; /* Already disabled (or never enabled) */ | |
| disable_irq(es8316->irq); | |
| guard(mutex)(&es8316->lock); | |
| snd_soc_component_update_bits(component, ES8316_GPIO_DEBOUNCE, | |
| ES8316_GPIO_ENABLE_INTERRUPT, 0); | |
| if (es8316->jack->status & SND_JACK_MICROPHONE) { | |
| es8316_disable_micbias_for_mic_gnd_short_detect(component); | |
| snd_soc_jack_report(es8316->jack, 0, SND_JACK_BTN_0); | |
| } | |
| es8316->jack = NULL; | |
| } | |
| static int es8316_set_jack(struct snd_soc_component *component, | |
| struct snd_soc_jack *jack, void *data) | |
| { | |
| if (jack) | |
| es8316_enable_jack_detect(component, jack); | |
| else | |
| es8316_disable_jack_detect(component); | |
| return 0; | |
| } | |
| static int es8316_probe(struct snd_soc_component *component) | |
| { | |
| struct es8316_priv *es8316 = snd_soc_component_get_drvdata(component); | |
| int ret; | |
| es8316->component = component; | |
| es8316->mclk = devm_clk_get_optional(component->dev, "mclk"); | |
| if (IS_ERR(es8316->mclk)) { | |
| dev_err(component->dev, "unable to get mclk\n"); | |
| return PTR_ERR(es8316->mclk); | |
| } | |
| if (!es8316->mclk) | |
| dev_warn(component->dev, "assuming static mclk\n"); | |
| ret = clk_prepare_enable(es8316->mclk); | |
| if (ret) { | |
| dev_err(component->dev, "unable to enable mclk\n"); | |
| return ret; | |
| } | |
| /* Reset codec and enable current state machine */ | |
| snd_soc_component_write(component, ES8316_RESET, 0x3f); | |
| usleep_range(5000, 5500); | |
| snd_soc_component_write(component, ES8316_RESET, ES8316_RESET_CSM_ON); | |
| msleep(30); | |
| /* | |
| * Documentation is unclear, but this value from the vendor driver is | |
| * needed otherwise audio output is silent. | |
| */ | |
| snd_soc_component_write(component, ES8316_SYS_VMIDSEL, 0xff); | |
| /* | |
| * Documentation for this register is unclear and incomplete, | |
| * but here is a vendor-provided value that improves volume | |
| * and quality for Intel CHT platforms. | |
| */ | |
| snd_soc_component_write(component, ES8316_CLKMGR_ADCOSR, 0x32); | |
| return 0; | |
| } | |
| static void es8316_remove(struct snd_soc_component *component) | |
| { | |
| struct es8316_priv *es8316 = snd_soc_component_get_drvdata(component); | |
| clk_disable_unprepare(es8316->mclk); | |
| } | |
| static int es8316_resume(struct snd_soc_component *component) | |
| { | |
| struct es8316_priv *es8316 = snd_soc_component_get_drvdata(component); | |
| regcache_cache_only(es8316->regmap, false); | |
| regcache_sync(es8316->regmap); | |
| return 0; | |
| } | |
| static int es8316_suspend(struct snd_soc_component *component) | |
| { | |
| struct es8316_priv *es8316 = snd_soc_component_get_drvdata(component); | |
| regcache_cache_only(es8316->regmap, true); | |
| regcache_mark_dirty(es8316->regmap); | |
| return 0; | |
| } | |
| static const struct snd_soc_component_driver soc_component_dev_es8316 = { | |
| .probe = es8316_probe, | |
| .remove = es8316_remove, | |
| .resume = es8316_resume, | |
| .suspend = es8316_suspend, | |
| .set_jack = es8316_set_jack, | |
| .controls = es8316_snd_controls, | |
| .num_controls = ARRAY_SIZE(es8316_snd_controls), | |
| .dapm_widgets = es8316_dapm_widgets, | |
| .num_dapm_widgets = ARRAY_SIZE(es8316_dapm_widgets), | |
| .dapm_routes = es8316_dapm_routes, | |
| .num_dapm_routes = ARRAY_SIZE(es8316_dapm_routes), | |
| .use_pmdown_time = 1, | |
| .endianness = 1, | |
| }; | |
| static bool es8316_volatile_reg(struct device *dev, unsigned int reg) | |
| { | |
| switch (reg) { | |
| case ES8316_GPIO_FLAG: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| static const struct regmap_config es8316_regmap = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| .use_single_read = true, | |
| .use_single_write = true, | |
| .max_register = 0x53, | |
| .volatile_reg = es8316_volatile_reg, | |
| .cache_type = REGCACHE_MAPLE, | |
| }; | |
| static int es8316_i2c_probe(struct i2c_client *i2c_client) | |
| { | |
| struct device *dev = &i2c_client->dev; | |
| struct es8316_priv *es8316; | |
| int ret; | |
| es8316 = devm_kzalloc(&i2c_client->dev, sizeof(struct es8316_priv), | |
| GFP_KERNEL); | |
| if (es8316 == NULL) | |
| return -ENOMEM; | |
| i2c_set_clientdata(i2c_client, es8316); | |
| ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(es8316_supply_names), | |
| es8316_supply_names); | |
| if (ret) | |
| return dev_err_probe(dev, ret, "unable to enable supplies\n"); | |
| es8316->regmap = devm_regmap_init_i2c(i2c_client, &es8316_regmap); | |
| if (IS_ERR(es8316->regmap)) | |
| return PTR_ERR(es8316->regmap); | |
| es8316->irq = i2c_client->irq; | |
| mutex_init(&es8316->lock); | |
| if (es8316->irq > 0) { | |
| ret = devm_request_threaded_irq(dev, es8316->irq, NULL, es8316_irq, | |
| IRQF_TRIGGER_HIGH | IRQF_ONESHOT | IRQF_NO_AUTOEN, | |
| "es8316", es8316); | |
| if (ret) { | |
| dev_warn(dev, "Failed to get IRQ %d: %d\n", es8316->irq, ret); | |
| es8316->irq = -ENXIO; | |
| } | |
| } | |
| return devm_snd_soc_register_component(&i2c_client->dev, | |
| &soc_component_dev_es8316, | |
| &es8316_dai, 1); | |
| } | |
| static const struct i2c_device_id es8316_i2c_id[] = { | |
| { .name = "es8316" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, es8316_i2c_id); | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id es8316_of_match[] = { | |
| { .compatible = "everest,es8316", }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, es8316_of_match); | |
| #endif | |
| #ifdef CONFIG_ACPI | |
| static const struct acpi_device_id es8316_acpi_match[] = { | |
| {"ESSX8316", 0}, | |
| {"ESSX8336", 0}, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(acpi, es8316_acpi_match); | |
| #endif | |
| static struct i2c_driver es8316_i2c_driver = { | |
| .driver = { | |
| .name = "es8316", | |
| .acpi_match_table = ACPI_PTR(es8316_acpi_match), | |
| .of_match_table = of_match_ptr(es8316_of_match), | |
| }, | |
| .probe = es8316_i2c_probe, | |
| .id_table = es8316_i2c_id, | |
| }; | |
| module_i2c_driver(es8316_i2c_driver); | |
| MODULE_DESCRIPTION("Everest Semi ES8316 ALSA SoC Codec Driver"); | |
| MODULE_AUTHOR("David Yang <yangxiaohua@everest-semi.com>"); | |
| MODULE_LICENSE("GPL v2"); |