| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * HD audio codec driver for Creative CA0132 chip | |
| * | |
| * Copyright (c) 2011, Creative Technology Ltd. | |
| * | |
| * Based on ca0110.c | |
| * Copyright (c) 2008 Takashi Iwai <tiwai@suse.de> | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/delay.h> | |
| #include <linux/slab.h> | |
| #include <linux/mutex.h> | |
| #include <linux/module.h> | |
| #include <linux/firmware.h> | |
| #include <linux/kernel.h> | |
| #include <linux/types.h> | |
| #include <linux/io.h> | |
| #include <linux/pci.h> | |
| #include <asm/io.h> | |
| #include <sound/core.h> | |
| #include <sound/hda_codec.h> | |
| #include "hda_local.h" | |
| #include "hda_auto_parser.h" | |
| #include "hda_jack.h" | |
| #include "generic.h" | |
| #include "ca0132_regs.h" | |
| /* Enable this to see controls for tuning purpose. */ | |
| #define ENABLE_TUNING_CONTROLS | |
| #ifdef ENABLE_TUNING_CONTROLS | |
| #include <sound/tlv.h> | |
| #endif | |
| #define FLOAT_ZERO 0x00000000 | |
| #define FLOAT_ONE 0x3f800000 | |
| #define FLOAT_TWO 0x40000000 | |
| #define FLOAT_THREE 0x40400000 | |
| #define FLOAT_FIVE 0x40a00000 | |
| #define FLOAT_SIX 0x40c00000 | |
| #define FLOAT_EIGHT 0x41000000 | |
| #define FLOAT_MINUS_5 0xc0a00000 | |
| #define UNSOL_TAG_DSP 0x16 | |
| #define DSP_DMA_WRITE_BUFLEN_INIT (1UL<<18) | |
| #define DSP_DMA_WRITE_BUFLEN_OVLY (1UL<<15) | |
| #define DMA_TRANSFER_FRAME_SIZE_NWORDS 8 | |
| #define DMA_TRANSFER_MAX_FRAME_SIZE_NWORDS 32 | |
| #define DMA_OVERLAY_FRAME_SIZE_NWORDS 2 | |
| #define MASTERCONTROL 0x80 | |
| #define MASTERCONTROL_ALLOC_DMA_CHAN 10 | |
| #define MASTERCONTROL_QUERY_SPEAKER_EQ_ADDRESS 60 | |
| #define WIDGET_CHIP_CTRL 0x15 | |
| #define WIDGET_DSP_CTRL 0x16 | |
| #define MEM_CONNID_MICIN1 3 | |
| #define MEM_CONNID_MICIN2 5 | |
| #define MEM_CONNID_MICOUT1 12 | |
| #define MEM_CONNID_MICOUT2 14 | |
| #define MEM_CONNID_WUH 10 | |
| #define MEM_CONNID_DSP 16 | |
| #define MEM_CONNID_DMIC 100 | |
| #define SCP_SET 0 | |
| #define SCP_GET 1 | |
| #define EFX_FILE "ctefx.bin" | |
| #define DESKTOP_EFX_FILE "ctefx-desktop.bin" | |
| #define R3DI_EFX_FILE "ctefx-r3di.bin" | |
| #ifdef CONFIG_SND_HDA_CODEC_CA0132_DSP | |
| MODULE_FIRMWARE(EFX_FILE); | |
| MODULE_FIRMWARE(DESKTOP_EFX_FILE); | |
| MODULE_FIRMWARE(R3DI_EFX_FILE); | |
| #endif | |
| static const char *const dirstr[2] = { "Playback", "Capture" }; | |
| #define NUM_OF_OUTPUTS 2 | |
| static const char *const out_type_str[2] = { "Speakers", "Headphone" }; | |
| enum { | |
| SPEAKER_OUT, | |
| HEADPHONE_OUT, | |
| }; | |
| enum { | |
| DIGITAL_MIC, | |
| LINE_MIC_IN | |
| }; | |
| /* Strings for Input Source Enum Control */ | |
| static const char *const in_src_str[3] = { "Microphone", "Line In", "Front Microphone" }; | |
| #define IN_SRC_NUM_OF_INPUTS 3 | |
| enum { | |
| REAR_MIC, | |
| REAR_LINE_IN, | |
| FRONT_MIC, | |
| }; | |
| enum { | |
| #define VNODE_START_NID 0x80 | |
| VNID_SPK = VNODE_START_NID, /* Speaker vnid */ | |
| VNID_MIC, | |
| VNID_HP_SEL, | |
| VNID_AMIC1_SEL, | |
| VNID_HP_ASEL, | |
| VNID_AMIC1_ASEL, | |
| VNODE_END_NID, | |
| #define VNODES_COUNT (VNODE_END_NID - VNODE_START_NID) | |
| #define EFFECT_START_NID 0x90 | |
| #define OUT_EFFECT_START_NID EFFECT_START_NID | |
| SURROUND = OUT_EFFECT_START_NID, | |
| CRYSTALIZER, | |
| DIALOG_PLUS, | |
| SMART_VOLUME, | |
| X_BASS, | |
| EQUALIZER, | |
| OUT_EFFECT_END_NID, | |
| #define OUT_EFFECTS_COUNT (OUT_EFFECT_END_NID - OUT_EFFECT_START_NID) | |
| #define IN_EFFECT_START_NID OUT_EFFECT_END_NID | |
| ECHO_CANCELLATION = IN_EFFECT_START_NID, | |
| VOICE_FOCUS, | |
| MIC_SVM, | |
| NOISE_REDUCTION, | |
| IN_EFFECT_END_NID, | |
| #define IN_EFFECTS_COUNT (IN_EFFECT_END_NID - IN_EFFECT_START_NID) | |
| VOICEFX = IN_EFFECT_END_NID, | |
| PLAY_ENHANCEMENT, | |
| CRYSTAL_VOICE, | |
| EFFECT_END_NID, | |
| OUTPUT_SOURCE_ENUM, | |
| INPUT_SOURCE_ENUM, | |
| XBASS_XOVER, | |
| EQ_PRESET_ENUM, | |
| SMART_VOLUME_ENUM, | |
| MIC_BOOST_ENUM, | |
| AE5_HEADPHONE_GAIN_ENUM, | |
| AE5_SOUND_FILTER_ENUM, | |
| ZXR_HEADPHONE_GAIN, | |
| SPEAKER_CHANNEL_CFG_ENUM, | |
| SPEAKER_FULL_RANGE_FRONT, | |
| SPEAKER_FULL_RANGE_REAR, | |
| BASS_REDIRECTION, | |
| BASS_REDIRECTION_XOVER, | |
| #define EFFECTS_COUNT (EFFECT_END_NID - EFFECT_START_NID) | |
| }; | |
| /* Effects values size*/ | |
| #define EFFECT_VALS_MAX_COUNT 12 | |
| /* | |
| * Default values for the effect slider controls, they are in order of their | |
| * effect NID's. Surround, Crystalizer, Dialog Plus, Smart Volume, and then | |
| * X-bass. | |
| */ | |
| static const unsigned int effect_slider_defaults[] = {67, 65, 50, 74, 50}; | |
| /* Amount of effect level sliders for ca0132_alt controls. */ | |
| #define EFFECT_LEVEL_SLIDERS 5 | |
| /* Latency introduced by DSP blocks in milliseconds. */ | |
| #define DSP_CAPTURE_INIT_LATENCY 0 | |
| #define DSP_CRYSTAL_VOICE_LATENCY 124 | |
| #define DSP_PLAYBACK_INIT_LATENCY 13 | |
| #define DSP_PLAY_ENHANCEMENT_LATENCY 30 | |
| #define DSP_SPEAKER_OUT_LATENCY 7 | |
| struct ct_effect { | |
| const char *name; | |
| hda_nid_t nid; | |
| int mid; /*effect module ID*/ | |
| int reqs[EFFECT_VALS_MAX_COUNT]; /*effect module request*/ | |
| int direct; /* 0:output; 1:input*/ | |
| int params; /* number of default non-on/off params */ | |
| /*effect default values, 1st is on/off. */ | |
| unsigned int def_vals[EFFECT_VALS_MAX_COUNT]; | |
| }; | |
| #define EFX_DIR_OUT 0 | |
| #define EFX_DIR_IN 1 | |
| static const struct ct_effect ca0132_effects[EFFECTS_COUNT] = { | |
| { .name = "Surround", | |
| .nid = SURROUND, | |
| .mid = 0x96, | |
| .reqs = {0, 1}, | |
| .direct = EFX_DIR_OUT, | |
| .params = 1, | |
| .def_vals = {0x3F800000, 0x3F2B851F} | |
| }, | |
| { .name = "Crystalizer", | |
| .nid = CRYSTALIZER, | |
| .mid = 0x96, | |
| .reqs = {7, 8}, | |
| .direct = EFX_DIR_OUT, | |
| .params = 1, | |
| .def_vals = {0x3F800000, 0x3F266666} | |
| }, | |
| { .name = "Dialog Plus", | |
| .nid = DIALOG_PLUS, | |
| .mid = 0x96, | |
| .reqs = {2, 3}, | |
| .direct = EFX_DIR_OUT, | |
| .params = 1, | |
| .def_vals = {0x00000000, 0x3F000000} | |
| }, | |
| { .name = "Smart Volume", | |
| .nid = SMART_VOLUME, | |
| .mid = 0x96, | |
| .reqs = {4, 5, 6}, | |
| .direct = EFX_DIR_OUT, | |
| .params = 2, | |
| .def_vals = {0x3F800000, 0x3F3D70A4, 0x00000000} | |
| }, | |
| { .name = "X-Bass", | |
| .nid = X_BASS, | |
| .mid = 0x96, | |
| .reqs = {24, 23, 25}, | |
| .direct = EFX_DIR_OUT, | |
| .params = 2, | |
| .def_vals = {0x3F800000, 0x42A00000, 0x3F000000} | |
| }, | |
| { .name = "Equalizer", | |
| .nid = EQUALIZER, | |
| .mid = 0x96, | |
| .reqs = {9, 10, 11, 12, 13, 14, | |
| 15, 16, 17, 18, 19, 20}, | |
| .direct = EFX_DIR_OUT, | |
| .params = 11, | |
| .def_vals = {0x00000000, 0x00000000, 0x00000000, 0x00000000, | |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, | |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000} | |
| }, | |
| { .name = "Echo Cancellation", | |
| .nid = ECHO_CANCELLATION, | |
| .mid = 0x95, | |
| .reqs = {0, 1, 2, 3}, | |
| .direct = EFX_DIR_IN, | |
| .params = 3, | |
| .def_vals = {0x00000000, 0x3F3A9692, 0x00000000, 0x00000000} | |
| }, | |
| { .name = "Voice Focus", | |
| .nid = VOICE_FOCUS, | |
| .mid = 0x95, | |
| .reqs = {6, 7, 8, 9}, | |
| .direct = EFX_DIR_IN, | |
| .params = 3, | |
| .def_vals = {0x3F800000, 0x3D7DF3B6, 0x41F00000, 0x41F00000} | |
| }, | |
| { .name = "Mic SVM", | |
| .nid = MIC_SVM, | |
| .mid = 0x95, | |
| .reqs = {44, 45}, | |
| .direct = EFX_DIR_IN, | |
| .params = 1, | |
| .def_vals = {0x00000000, 0x3F3D70A4} | |
| }, | |
| { .name = "Noise Reduction", | |
| .nid = NOISE_REDUCTION, | |
| .mid = 0x95, | |
| .reqs = {4, 5}, | |
| .direct = EFX_DIR_IN, | |
| .params = 1, | |
| .def_vals = {0x3F800000, 0x3F000000} | |
| }, | |
| { .name = "VoiceFX", | |
| .nid = VOICEFX, | |
| .mid = 0x95, | |
| .reqs = {10, 11, 12, 13, 14, 15, 16, 17, 18}, | |
| .direct = EFX_DIR_IN, | |
| .params = 8, | |
| .def_vals = {0x00000000, 0x43C80000, 0x44AF0000, 0x44FA0000, | |
| 0x3F800000, 0x3F800000, 0x3F800000, 0x00000000, | |
| 0x00000000} | |
| } | |
| }; | |
| /* Tuning controls */ | |
| #ifdef ENABLE_TUNING_CONTROLS | |
| enum { | |
| #define TUNING_CTL_START_NID 0xC0 | |
| WEDGE_ANGLE = TUNING_CTL_START_NID, | |
| SVM_LEVEL, | |
| EQUALIZER_BAND_0, | |
| EQUALIZER_BAND_1, | |
| EQUALIZER_BAND_2, | |
| EQUALIZER_BAND_3, | |
| EQUALIZER_BAND_4, | |
| EQUALIZER_BAND_5, | |
| EQUALIZER_BAND_6, | |
| EQUALIZER_BAND_7, | |
| EQUALIZER_BAND_8, | |
| EQUALIZER_BAND_9, | |
| TUNING_CTL_END_NID | |
| #define TUNING_CTLS_COUNT (TUNING_CTL_END_NID - TUNING_CTL_START_NID) | |
| }; | |
| struct ct_tuning_ctl { | |
| const char *name; | |
| hda_nid_t parent_nid; | |
| hda_nid_t nid; | |
| int mid; /*effect module ID*/ | |
| int req; /*effect module request*/ | |
| int direct; /* 0:output; 1:input*/ | |
| unsigned int def_val;/*effect default values*/ | |
| }; | |
| static const struct ct_tuning_ctl ca0132_tuning_ctls[] = { | |
| { .name = "Wedge Angle", | |
| .parent_nid = VOICE_FOCUS, | |
| .nid = WEDGE_ANGLE, | |
| .mid = 0x95, | |
| .req = 8, | |
| .direct = EFX_DIR_IN, | |
| .def_val = 0x41F00000 | |
| }, | |
| { .name = "SVM Level", | |
| .parent_nid = MIC_SVM, | |
| .nid = SVM_LEVEL, | |
| .mid = 0x95, | |
| .req = 45, | |
| .direct = EFX_DIR_IN, | |
| .def_val = 0x3F3D70A4 | |
| }, | |
| { .name = "EQ Band0", | |
| .parent_nid = EQUALIZER, | |
| .nid = EQUALIZER_BAND_0, | |
| .mid = 0x96, | |
| .req = 11, | |
| .direct = EFX_DIR_OUT, | |
| .def_val = 0x00000000 | |
| }, | |
| { .name = "EQ Band1", | |
| .parent_nid = EQUALIZER, | |
| .nid = EQUALIZER_BAND_1, | |
| .mid = 0x96, | |
| .req = 12, | |
| .direct = EFX_DIR_OUT, | |
| .def_val = 0x00000000 | |
| }, | |
| { .name = "EQ Band2", | |
| .parent_nid = EQUALIZER, | |
| .nid = EQUALIZER_BAND_2, | |
| .mid = 0x96, | |
| .req = 13, | |
| .direct = EFX_DIR_OUT, | |
| .def_val = 0x00000000 | |
| }, | |
| { .name = "EQ Band3", | |
| .parent_nid = EQUALIZER, | |
| .nid = EQUALIZER_BAND_3, | |
| .mid = 0x96, | |
| .req = 14, | |
| .direct = EFX_DIR_OUT, | |
| .def_val = 0x00000000 | |
| }, | |
| { .name = "EQ Band4", | |
| .parent_nid = EQUALIZER, | |
| .nid = EQUALIZER_BAND_4, | |
| .mid = 0x96, | |
| .req = 15, | |
| .direct = EFX_DIR_OUT, | |
| .def_val = 0x00000000 | |
| }, | |
| { .name = "EQ Band5", | |
| .parent_nid = EQUALIZER, | |
| .nid = EQUALIZER_BAND_5, | |
| .mid = 0x96, | |
| .req = 16, | |
| .direct = EFX_DIR_OUT, | |
| .def_val = 0x00000000 | |
| }, | |
| { .name = "EQ Band6", | |
| .parent_nid = EQUALIZER, | |
| .nid = EQUALIZER_BAND_6, | |
| .mid = 0x96, | |
| .req = 17, | |
| .direct = EFX_DIR_OUT, | |
| .def_val = 0x00000000 | |
| }, | |
| { .name = "EQ Band7", | |
| .parent_nid = EQUALIZER, | |
| .nid = EQUALIZER_BAND_7, | |
| .mid = 0x96, | |
| .req = 18, | |
| .direct = EFX_DIR_OUT, | |
| .def_val = 0x00000000 | |
| }, | |
| { .name = "EQ Band8", | |
| .parent_nid = EQUALIZER, | |
| .nid = EQUALIZER_BAND_8, | |
| .mid = 0x96, | |
| .req = 19, | |
| .direct = EFX_DIR_OUT, | |
| .def_val = 0x00000000 | |
| }, | |
| { .name = "EQ Band9", | |
| .parent_nid = EQUALIZER, | |
| .nid = EQUALIZER_BAND_9, | |
| .mid = 0x96, | |
| .req = 20, | |
| .direct = EFX_DIR_OUT, | |
| .def_val = 0x00000000 | |
| } | |
| }; | |
| #endif | |
| /* Voice FX Presets */ | |
| #define VOICEFX_MAX_PARAM_COUNT 9 | |
| struct ct_voicefx { | |
| const char *name; | |
| hda_nid_t nid; | |
| int mid; | |
| int reqs[VOICEFX_MAX_PARAM_COUNT]; /*effect module request*/ | |
| }; | |
| struct ct_voicefx_preset { | |
| const char *name; /*preset name*/ | |
| unsigned int vals[VOICEFX_MAX_PARAM_COUNT]; | |
| }; | |
| static const struct ct_voicefx ca0132_voicefx = { | |
| .name = "VoiceFX Capture Switch", | |
| .nid = VOICEFX, | |
| .mid = 0x95, | |
| .reqs = {10, 11, 12, 13, 14, 15, 16, 17, 18} | |
| }; | |
| static const struct ct_voicefx_preset ca0132_voicefx_presets[] = { | |
| { .name = "Neutral", | |
| .vals = { 0x00000000, 0x43C80000, 0x44AF0000, | |
| 0x44FA0000, 0x3F800000, 0x3F800000, | |
| 0x3F800000, 0x00000000, 0x00000000 } | |
| }, | |
| { .name = "Female2Male", | |
| .vals = { 0x3F800000, 0x43C80000, 0x44AF0000, | |
| 0x44FA0000, 0x3F19999A, 0x3F866666, | |
| 0x3F800000, 0x00000000, 0x00000000 } | |
| }, | |
| { .name = "Male2Female", | |
| .vals = { 0x3F800000, 0x43C80000, 0x44AF0000, | |
| 0x450AC000, 0x4017AE14, 0x3F6B851F, | |
| 0x3F800000, 0x00000000, 0x00000000 } | |
| }, | |
| { .name = "ScrappyKid", | |
| .vals = { 0x3F800000, 0x43C80000, 0x44AF0000, | |
| 0x44FA0000, 0x40400000, 0x3F28F5C3, | |
| 0x3F800000, 0x00000000, 0x00000000 } | |
| }, | |
| { .name = "Elderly", | |
| .vals = { 0x3F800000, 0x44324000, 0x44BB8000, | |
| 0x44E10000, 0x3FB33333, 0x3FB9999A, | |
| 0x3F800000, 0x3E3A2E43, 0x00000000 } | |
| }, | |
| { .name = "Orc", | |
| .vals = { 0x3F800000, 0x43EA0000, 0x44A52000, | |
| 0x45098000, 0x3F266666, 0x3FC00000, | |
| 0x3F800000, 0x00000000, 0x00000000 } | |
| }, | |
| { .name = "Elf", | |
| .vals = { 0x3F800000, 0x43C70000, 0x44AE6000, | |
| 0x45193000, 0x3F8E147B, 0x3F75C28F, | |
| 0x3F800000, 0x00000000, 0x00000000 } | |
| }, | |
| { .name = "Dwarf", | |
| .vals = { 0x3F800000, 0x43930000, 0x44BEE000, | |
| 0x45007000, 0x3F451EB8, 0x3F7851EC, | |
| 0x3F800000, 0x00000000, 0x00000000 } | |
| }, | |
| { .name = "AlienBrute", | |
| .vals = { 0x3F800000, 0x43BFC5AC, 0x44B28FDF, | |
| 0x451F6000, 0x3F266666, 0x3FA7D945, | |
| 0x3F800000, 0x3CF5C28F, 0x00000000 } | |
| }, | |
| { .name = "Robot", | |
| .vals = { 0x3F800000, 0x43C80000, 0x44AF0000, | |
| 0x44FA0000, 0x3FB2718B, 0x3F800000, | |
| 0xBC07010E, 0x00000000, 0x00000000 } | |
| }, | |
| { .name = "Marine", | |
| .vals = { 0x3F800000, 0x43C20000, 0x44906000, | |
| 0x44E70000, 0x3F4CCCCD, 0x3F8A3D71, | |
| 0x3F0A3D71, 0x00000000, 0x00000000 } | |
| }, | |
| { .name = "Emo", | |
| .vals = { 0x3F800000, 0x43C80000, 0x44AF0000, | |
| 0x44FA0000, 0x3F800000, 0x3F800000, | |
| 0x3E4CCCCD, 0x00000000, 0x00000000 } | |
| }, | |
| { .name = "DeepVoice", | |
| .vals = { 0x3F800000, 0x43A9C5AC, 0x44AA4FDF, | |
| 0x44FFC000, 0x3EDBB56F, 0x3F99C4CA, | |
| 0x3F800000, 0x00000000, 0x00000000 } | |
| }, | |
| { .name = "Munchkin", | |
| .vals = { 0x3F800000, 0x43C80000, 0x44AF0000, | |
| 0x44FA0000, 0x3F800000, 0x3F1A043C, | |
| 0x3F800000, 0x00000000, 0x00000000 } | |
| } | |
| }; | |
| /* ca0132 EQ presets, taken from Windows Sound Blaster Z Driver */ | |
| #define EQ_PRESET_MAX_PARAM_COUNT 11 | |
| struct ct_eq { | |
| const char *name; | |
| hda_nid_t nid; | |
| int mid; | |
| int reqs[EQ_PRESET_MAX_PARAM_COUNT]; /*effect module request*/ | |
| }; | |
| struct ct_eq_preset { | |
| const char *name; /*preset name*/ | |
| unsigned int vals[EQ_PRESET_MAX_PARAM_COUNT]; | |
| }; | |
| static const struct ct_eq ca0132_alt_eq_enum = { | |
| .name = "FX: Equalizer Preset Switch", | |
| .nid = EQ_PRESET_ENUM, | |
| .mid = 0x96, | |
| .reqs = {10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20} | |
| }; | |
| static const struct ct_eq_preset ca0132_alt_eq_presets[] = { | |
| { .name = "Flat", | |
| .vals = { 0x00000000, 0x00000000, 0x00000000, | |
| 0x00000000, 0x00000000, 0x00000000, | |
| 0x00000000, 0x00000000, 0x00000000, | |
| 0x00000000, 0x00000000 } | |
| }, | |
| { .name = "Acoustic", | |
| .vals = { 0x00000000, 0x00000000, 0x3F8CCCCD, | |
| 0x40000000, 0x00000000, 0x00000000, | |
| 0x00000000, 0x00000000, 0x40000000, | |
| 0x40000000, 0x40000000 } | |
| }, | |
| { .name = "Classical", | |
| .vals = { 0x00000000, 0x00000000, 0x40C00000, | |
| 0x40C00000, 0x40466666, 0x00000000, | |
| 0x00000000, 0x00000000, 0x00000000, | |
| 0x40466666, 0x40466666 } | |
| }, | |
| { .name = "Country", | |
| .vals = { 0x00000000, 0xBF99999A, 0x00000000, | |
| 0x3FA66666, 0x3FA66666, 0x3F8CCCCD, | |
| 0x00000000, 0x00000000, 0x40000000, | |
| 0x40466666, 0x40800000 } | |
| }, | |
| { .name = "Dance", | |
| .vals = { 0x00000000, 0xBF99999A, 0x40000000, | |
| 0x40466666, 0x40866666, 0xBF99999A, | |
| 0xBF99999A, 0x00000000, 0x00000000, | |
| 0x40800000, 0x40800000 } | |
| }, | |
| { .name = "Jazz", | |
| .vals = { 0x00000000, 0x00000000, 0x00000000, | |
| 0x3F8CCCCD, 0x40800000, 0x40800000, | |
| 0x40800000, 0x00000000, 0x3F8CCCCD, | |
| 0x40466666, 0x40466666 } | |
| }, | |
| { .name = "New Age", | |
| .vals = { 0x00000000, 0x00000000, 0x40000000, | |
| 0x40000000, 0x00000000, 0x00000000, | |
| 0x00000000, 0x3F8CCCCD, 0x40000000, | |
| 0x40000000, 0x40000000 } | |
| }, | |
| { .name = "Pop", | |
| .vals = { 0x00000000, 0xBFCCCCCD, 0x00000000, | |
| 0x40000000, 0x40000000, 0x00000000, | |
| 0xBF99999A, 0xBF99999A, 0x00000000, | |
| 0x40466666, 0x40C00000 } | |
| }, | |
| { .name = "Rock", | |
| .vals = { 0x00000000, 0xBF99999A, 0xBF99999A, | |
| 0x3F8CCCCD, 0x40000000, 0xBF99999A, | |
| 0xBF99999A, 0x00000000, 0x00000000, | |
| 0x40800000, 0x40800000 } | |
| }, | |
| { .name = "Vocal", | |
| .vals = { 0x00000000, 0xC0000000, 0xBF99999A, | |
| 0xBF99999A, 0x00000000, 0x40466666, | |
| 0x40800000, 0x40466666, 0x00000000, | |
| 0x00000000, 0x3F8CCCCD } | |
| } | |
| }; | |
| /* | |
| * DSP reqs for handling full-range speakers/bass redirection. If a speaker is | |
| * set as not being full range, and bass redirection is enabled, all | |
| * frequencies below the crossover frequency are redirected to the LFE | |
| * channel. If the surround configuration has no LFE channel, this can't be | |
| * enabled. X-Bass must be disabled when using these. | |
| */ | |
| enum speaker_range_reqs { | |
| SPEAKER_BASS_REDIRECT = 0x15, | |
| SPEAKER_BASS_REDIRECT_XOVER_FREQ = 0x16, | |
| /* Between 0x16-0x1a are the X-Bass reqs. */ | |
| SPEAKER_FULL_RANGE_FRONT_L_R = 0x1a, | |
| SPEAKER_FULL_RANGE_CENTER_LFE = 0x1b, | |
| SPEAKER_FULL_RANGE_REAR_L_R = 0x1c, | |
| SPEAKER_FULL_RANGE_SURROUND_L_R = 0x1d, | |
| SPEAKER_BASS_REDIRECT_SUB_GAIN = 0x1e, | |
| }; | |
| /* | |
| * Definitions for the DSP req's to handle speaker tuning. These all belong to | |
| * module ID 0x96, the output effects module. | |
| */ | |
| enum speaker_tuning_reqs { | |
| /* | |
| * Currently, this value is always set to 0.0f. However, on Windows, | |
| * when selecting certain headphone profiles on the new Sound Blaster | |
| * connect software, the QUERY_SPEAKER_EQ_ADDRESS req on mid 0x80 is | |
| * sent. This gets the speaker EQ address area, which is then used to | |
| * send over (presumably) an equalizer profile for the specific | |
| * headphone setup. It is sent using the same method the DSP | |
| * firmware is uploaded with, which I believe is why the 'ctspeq.bin' | |
| * file exists in linux firmware tree but goes unused. It would also | |
| * explain why the QUERY_SPEAKER_EQ_ADDRESS req is defined but unused. | |
| * Once this profile is sent over, SPEAKER_TUNING_USE_SPEAKER_EQ is | |
| * set to 1.0f. | |
| */ | |
| SPEAKER_TUNING_USE_SPEAKER_EQ = 0x1f, | |
| SPEAKER_TUNING_ENABLE_CENTER_EQ = 0x20, | |
| SPEAKER_TUNING_FRONT_LEFT_VOL_LEVEL = 0x21, | |
| SPEAKER_TUNING_FRONT_RIGHT_VOL_LEVEL = 0x22, | |
| SPEAKER_TUNING_CENTER_VOL_LEVEL = 0x23, | |
| SPEAKER_TUNING_LFE_VOL_LEVEL = 0x24, | |
| SPEAKER_TUNING_REAR_LEFT_VOL_LEVEL = 0x25, | |
| SPEAKER_TUNING_REAR_RIGHT_VOL_LEVEL = 0x26, | |
| SPEAKER_TUNING_SURROUND_LEFT_VOL_LEVEL = 0x27, | |
| SPEAKER_TUNING_SURROUND_RIGHT_VOL_LEVEL = 0x28, | |
| /* | |
| * Inversion is used when setting headphone virtualization to line | |
| * out. Not sure why this is, but it's the only place it's ever used. | |
| */ | |
| SPEAKER_TUNING_FRONT_LEFT_INVERT = 0x29, | |
| SPEAKER_TUNING_FRONT_RIGHT_INVERT = 0x2a, | |
| SPEAKER_TUNING_CENTER_INVERT = 0x2b, | |
| SPEAKER_TUNING_LFE_INVERT = 0x2c, | |
| SPEAKER_TUNING_REAR_LEFT_INVERT = 0x2d, | |
| SPEAKER_TUNING_REAR_RIGHT_INVERT = 0x2e, | |
| SPEAKER_TUNING_SURROUND_LEFT_INVERT = 0x2f, | |
| SPEAKER_TUNING_SURROUND_RIGHT_INVERT = 0x30, | |
| /* Delay is used when setting surround speaker distance in Windows. */ | |
| SPEAKER_TUNING_FRONT_LEFT_DELAY = 0x31, | |
| SPEAKER_TUNING_FRONT_RIGHT_DELAY = 0x32, | |
| SPEAKER_TUNING_CENTER_DELAY = 0x33, | |
| SPEAKER_TUNING_LFE_DELAY = 0x34, | |
| SPEAKER_TUNING_REAR_LEFT_DELAY = 0x35, | |
| SPEAKER_TUNING_REAR_RIGHT_DELAY = 0x36, | |
| SPEAKER_TUNING_SURROUND_LEFT_DELAY = 0x37, | |
| SPEAKER_TUNING_SURROUND_RIGHT_DELAY = 0x38, | |
| /* Of these two, only mute seems to ever be used. */ | |
| SPEAKER_TUNING_MAIN_VOLUME = 0x39, | |
| SPEAKER_TUNING_MUTE = 0x3a, | |
| }; | |
| /* Surround output channel count configuration structures. */ | |
| #define SPEAKER_CHANNEL_CFG_COUNT 5 | |
| enum { | |
| SPEAKER_CHANNELS_2_0, | |
| SPEAKER_CHANNELS_2_1, | |
| SPEAKER_CHANNELS_4_0, | |
| SPEAKER_CHANNELS_4_1, | |
| SPEAKER_CHANNELS_5_1, | |
| }; | |
| struct ca0132_alt_speaker_channel_cfg { | |
| const char *name; | |
| unsigned int val; | |
| }; | |
| static const struct ca0132_alt_speaker_channel_cfg speaker_channel_cfgs[] = { | |
| { .name = "2.0", | |
| .val = FLOAT_ONE | |
| }, | |
| { .name = "2.1", | |
| .val = FLOAT_TWO | |
| }, | |
| { .name = "4.0", | |
| .val = FLOAT_FIVE | |
| }, | |
| { .name = "4.1", | |
| .val = FLOAT_SIX | |
| }, | |
| { .name = "5.1", | |
| .val = FLOAT_EIGHT | |
| } | |
| }; | |
| /* | |
| * DSP volume setting structs. Req 1 is left volume, req 2 is right volume, | |
| * and I don't know what the third req is, but it's always zero. I assume it's | |
| * some sort of update or set command to tell the DSP there's new volume info. | |
| */ | |
| #define DSP_VOL_OUT 0 | |
| #define DSP_VOL_IN 1 | |
| struct ct_dsp_volume_ctl { | |
| hda_nid_t vnid; | |
| int mid; /* module ID*/ | |
| unsigned int reqs[3]; /* scp req ID */ | |
| }; | |
| static const struct ct_dsp_volume_ctl ca0132_alt_vol_ctls[] = { | |
| { .vnid = VNID_SPK, | |
| .mid = 0x32, | |
| .reqs = {3, 4, 2} | |
| }, | |
| { .vnid = VNID_MIC, | |
| .mid = 0x37, | |
| .reqs = {2, 3, 1} | |
| } | |
| }; | |
| /* Values for ca0113_mmio_command_set for selecting output. */ | |
| #define AE_CA0113_OUT_SET_COMMANDS 6 | |
| struct ae_ca0113_output_set { | |
| unsigned int group[AE_CA0113_OUT_SET_COMMANDS]; | |
| unsigned int target[AE_CA0113_OUT_SET_COMMANDS]; | |
| unsigned int vals[NUM_OF_OUTPUTS][AE_CA0113_OUT_SET_COMMANDS]; | |
| }; | |
| static const struct ae_ca0113_output_set ae5_ca0113_output_presets = { | |
| .group = { 0x30, 0x30, 0x48, 0x48, 0x48, 0x30 }, | |
| .target = { 0x2e, 0x30, 0x0d, 0x17, 0x19, 0x32 }, | |
| /* Speakers. */ | |
| .vals = { { 0x00, 0x00, 0x40, 0x00, 0x00, 0x3f }, | |
| /* Headphones. */ | |
| { 0x3f, 0x3f, 0x00, 0x00, 0x00, 0x00 } }, | |
| }; | |
| static const struct ae_ca0113_output_set ae7_ca0113_output_presets = { | |
| .group = { 0x30, 0x30, 0x48, 0x48, 0x48, 0x30 }, | |
| .target = { 0x2e, 0x30, 0x0d, 0x17, 0x19, 0x32 }, | |
| /* Speakers. */ | |
| .vals = { { 0x00, 0x00, 0x40, 0x00, 0x00, 0x3f }, | |
| /* Headphones. */ | |
| { 0x3f, 0x3f, 0x00, 0x00, 0x02, 0x00 } }, | |
| }; | |
| /* ae5 ca0113 command sequences to set headphone gain levels. */ | |
| #define AE5_HEADPHONE_GAIN_PRESET_MAX_COMMANDS 4 | |
| struct ae5_headphone_gain_set { | |
| const char *name; | |
| unsigned int vals[AE5_HEADPHONE_GAIN_PRESET_MAX_COMMANDS]; | |
| }; | |
| static const struct ae5_headphone_gain_set ae5_headphone_gain_presets[] = { | |
| { .name = "Low (16-31", | |
| .vals = { 0xff, 0x2c, 0xf5, 0x32 } | |
| }, | |
| { .name = "Medium (32-149", | |
| .vals = { 0x38, 0xa8, 0x3e, 0x4c } | |
| }, | |
| { .name = "High (150-600", | |
| .vals = { 0xff, 0xff, 0xff, 0x7f } | |
| } | |
| }; | |
| struct ae5_filter_set { | |
| const char *name; | |
| unsigned int val; | |
| }; | |
| static const struct ae5_filter_set ae5_filter_presets[] = { | |
| { .name = "Slow Roll Off", | |
| .val = 0xa0 | |
| }, | |
| { .name = "Minimum Phase", | |
| .val = 0xc0 | |
| }, | |
| { .name = "Fast Roll Off", | |
| .val = 0x80 | |
| } | |
| }; | |
| /* | |
| * Data structures for storing audio router remapping data. These are used to | |
| * remap a currently active streams ports. | |
| */ | |
| struct chipio_stream_remap_data { | |
| unsigned int stream_id; | |
| unsigned int count; | |
| unsigned int offset[16]; | |
| unsigned int value[16]; | |
| }; | |
| static const struct chipio_stream_remap_data stream_remap_data[] = { | |
| { .stream_id = 0x14, | |
| .count = 0x04, | |
| .offset = { 0x00, 0x04, 0x08, 0x0c }, | |
| .value = { 0x0001f8c0, 0x0001f9c1, 0x0001fac6, 0x0001fbc7 }, | |
| }, | |
| { .stream_id = 0x0c, | |
| .count = 0x0c, | |
| .offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, | |
| 0x20, 0x24, 0x28, 0x2c }, | |
| .value = { 0x0001e0c0, 0x0001e1c1, 0x0001e4c2, 0x0001e5c3, | |
| 0x0001e2c4, 0x0001e3c5, 0x0001e8c6, 0x0001e9c7, | |
| 0x0001ecc8, 0x0001edc9, 0x0001eaca, 0x0001ebcb }, | |
| }, | |
| { .stream_id = 0x0c, | |
| .count = 0x08, | |
| .offset = { 0x08, 0x0c, 0x10, 0x14, 0x20, 0x24, 0x28, 0x2c }, | |
| .value = { 0x000140c2, 0x000141c3, 0x000150c4, 0x000151c5, | |
| 0x000142c8, 0x000143c9, 0x000152ca, 0x000153cb }, | |
| } | |
| }; | |
| enum hda_cmd_vendor_io { | |
| /* for DspIO node */ | |
| VENDOR_DSPIO_SCP_WRITE_DATA_LOW = 0x000, | |
| VENDOR_DSPIO_SCP_WRITE_DATA_HIGH = 0x100, | |
| VENDOR_DSPIO_STATUS = 0xF01, | |
| VENDOR_DSPIO_SCP_POST_READ_DATA = 0x702, | |
| VENDOR_DSPIO_SCP_READ_DATA = 0xF02, | |
| VENDOR_DSPIO_DSP_INIT = 0x703, | |
| VENDOR_DSPIO_SCP_POST_COUNT_QUERY = 0x704, | |
| VENDOR_DSPIO_SCP_READ_COUNT = 0xF04, | |
| /* for ChipIO node */ | |
| VENDOR_CHIPIO_ADDRESS_LOW = 0x000, | |
| VENDOR_CHIPIO_ADDRESS_HIGH = 0x100, | |
| VENDOR_CHIPIO_STREAM_FORMAT = 0x200, | |
| VENDOR_CHIPIO_DATA_LOW = 0x300, | |
| VENDOR_CHIPIO_DATA_HIGH = 0x400, | |
| VENDOR_CHIPIO_8051_WRITE_DIRECT = 0x500, | |
| VENDOR_CHIPIO_8051_READ_DIRECT = 0xD00, | |
| VENDOR_CHIPIO_GET_PARAMETER = 0xF00, | |
| VENDOR_CHIPIO_STATUS = 0xF01, | |
| VENDOR_CHIPIO_HIC_POST_READ = 0x702, | |
| VENDOR_CHIPIO_HIC_READ_DATA = 0xF03, | |
| VENDOR_CHIPIO_8051_DATA_WRITE = 0x707, | |
| VENDOR_CHIPIO_8051_DATA_READ = 0xF07, | |
| VENDOR_CHIPIO_8051_PMEM_READ = 0xF08, | |
| VENDOR_CHIPIO_8051_IRAM_WRITE = 0x709, | |
| VENDOR_CHIPIO_8051_IRAM_READ = 0xF09, | |
| VENDOR_CHIPIO_CT_EXTENSIONS_ENABLE = 0x70A, | |
| VENDOR_CHIPIO_CT_EXTENSIONS_GET = 0xF0A, | |
| VENDOR_CHIPIO_PLL_PMU_WRITE = 0x70C, | |
| VENDOR_CHIPIO_PLL_PMU_READ = 0xF0C, | |
| VENDOR_CHIPIO_8051_ADDRESS_LOW = 0x70D, | |
| VENDOR_CHIPIO_8051_ADDRESS_HIGH = 0x70E, | |
| VENDOR_CHIPIO_FLAG_SET = 0x70F, | |
| VENDOR_CHIPIO_FLAGS_GET = 0xF0F, | |
| VENDOR_CHIPIO_PARAM_SET = 0x710, | |
| VENDOR_CHIPIO_PARAM_GET = 0xF10, | |
| VENDOR_CHIPIO_PORT_ALLOC_CONFIG_SET = 0x711, | |
| VENDOR_CHIPIO_PORT_ALLOC_SET = 0x712, | |
| VENDOR_CHIPIO_PORT_ALLOC_GET = 0xF12, | |
| VENDOR_CHIPIO_PORT_FREE_SET = 0x713, | |
| VENDOR_CHIPIO_PARAM_EX_ID_GET = 0xF17, | |
| VENDOR_CHIPIO_PARAM_EX_ID_SET = 0x717, | |
| VENDOR_CHIPIO_PARAM_EX_VALUE_GET = 0xF18, | |
| VENDOR_CHIPIO_PARAM_EX_VALUE_SET = 0x718, | |
| VENDOR_CHIPIO_DMIC_CTL_SET = 0x788, | |
| VENDOR_CHIPIO_DMIC_CTL_GET = 0xF88, | |
| VENDOR_CHIPIO_DMIC_PIN_SET = 0x789, | |
| VENDOR_CHIPIO_DMIC_PIN_GET = 0xF89, | |
| VENDOR_CHIPIO_DMIC_MCLK_SET = 0x78A, | |
| VENDOR_CHIPIO_DMIC_MCLK_GET = 0xF8A, | |
| VENDOR_CHIPIO_EAPD_SEL_SET = 0x78D | |
| }; | |
| /* | |
| * Control flag IDs | |
| */ | |
| enum control_flag_id { | |
| /* Connection manager stream setup is bypassed/enabled */ | |
| CONTROL_FLAG_C_MGR = 0, | |
| /* DSP DMA is bypassed/enabled */ | |
| CONTROL_FLAG_DMA = 1, | |
| /* 8051 'idle' mode is disabled/enabled */ | |
| CONTROL_FLAG_IDLE_ENABLE = 2, | |
| /* Tracker for the SPDIF-in path is bypassed/enabled */ | |
| CONTROL_FLAG_TRACKER = 3, | |
| /* DigitalOut to Spdif2Out connection is disabled/enabled */ | |
| CONTROL_FLAG_SPDIF2OUT = 4, | |
| /* Digital Microphone is disabled/enabled */ | |
| CONTROL_FLAG_DMIC = 5, | |
| /* ADC_B rate is 48 kHz/96 kHz */ | |
| CONTROL_FLAG_ADC_B_96KHZ = 6, | |
| /* ADC_C rate is 48 kHz/96 kHz */ | |
| CONTROL_FLAG_ADC_C_96KHZ = 7, | |
| /* DAC rate is 48 kHz/96 kHz (affects all DACs) */ | |
| CONTROL_FLAG_DAC_96KHZ = 8, | |
| /* DSP rate is 48 kHz/96 kHz */ | |
| CONTROL_FLAG_DSP_96KHZ = 9, | |
| /* SRC clock is 98 MHz/196 MHz (196 MHz forces rate to 96 KHz) */ | |
| CONTROL_FLAG_SRC_CLOCK_196MHZ = 10, | |
| /* SRC rate is 48 kHz/96 kHz (48 kHz disabled when clock is 196 MHz) */ | |
| CONTROL_FLAG_SRC_RATE_96KHZ = 11, | |
| /* Decode Loop (DSP->SRC->DSP) is disabled/enabled */ | |
| CONTROL_FLAG_DECODE_LOOP = 12, | |
| /* De-emphasis filter on DAC-1 disabled/enabled */ | |
| CONTROL_FLAG_DAC1_DEEMPHASIS = 13, | |
| /* De-emphasis filter on DAC-2 disabled/enabled */ | |
| CONTROL_FLAG_DAC2_DEEMPHASIS = 14, | |
| /* De-emphasis filter on DAC-3 disabled/enabled */ | |
| CONTROL_FLAG_DAC3_DEEMPHASIS = 15, | |
| /* High-pass filter on ADC_B disabled/enabled */ | |
| CONTROL_FLAG_ADC_B_HIGH_PASS = 16, | |
| /* High-pass filter on ADC_C disabled/enabled */ | |
| CONTROL_FLAG_ADC_C_HIGH_PASS = 17, | |
| /* Common mode on Port_A disabled/enabled */ | |
| CONTROL_FLAG_PORT_A_COMMON_MODE = 18, | |
| /* Common mode on Port_D disabled/enabled */ | |
| CONTROL_FLAG_PORT_D_COMMON_MODE = 19, | |
| /* Impedance for ramp generator on Port_A 16 Ohm/10K Ohm */ | |
| CONTROL_FLAG_PORT_A_10KOHM_LOAD = 20, | |
| /* Impedance for ramp generator on Port_D, 16 Ohm/10K Ohm */ | |
| CONTROL_FLAG_PORT_D_10KOHM_LOAD = 21, | |
| /* ASI rate is 48kHz/96kHz */ | |
| CONTROL_FLAG_ASI_96KHZ = 22, | |
| /* DAC power settings able to control attached ports no/yes */ | |
| CONTROL_FLAG_DACS_CONTROL_PORTS = 23, | |
| /* Clock Stop OK reporting is disabled/enabled */ | |
| CONTROL_FLAG_CONTROL_STOP_OK_ENABLE = 24, | |
| /* Number of control flags */ | |
| CONTROL_FLAGS_MAX = (CONTROL_FLAG_CONTROL_STOP_OK_ENABLE+1) | |
| }; | |
| /* | |
| * Control parameter IDs | |
| */ | |
| enum control_param_id { | |
| /* 0: None, 1: Mic1In*/ | |
| CONTROL_PARAM_VIP_SOURCE = 1, | |
| /* 0: force HDA, 1: allow DSP if HDA Spdif1Out stream is idle */ | |
| CONTROL_PARAM_SPDIF1_SOURCE = 2, | |
| /* Port A output stage gain setting to use when 16 Ohm output | |
| * impedance is selected*/ | |
| CONTROL_PARAM_PORTA_160OHM_GAIN = 8, | |
| /* Port D output stage gain setting to use when 16 Ohm output | |
| * impedance is selected*/ | |
| CONTROL_PARAM_PORTD_160OHM_GAIN = 10, | |
| /* | |
| * This control param name was found in the 8051 memory, and makes | |
| * sense given the fact the AE-5 uses it and has the ASI flag set. | |
| */ | |
| CONTROL_PARAM_ASI = 23, | |
| /* Stream Control */ | |
| /* Select stream with the given ID */ | |
| CONTROL_PARAM_STREAM_ID = 24, | |
| /* Source connection point for the selected stream */ | |
| CONTROL_PARAM_STREAM_SOURCE_CONN_POINT = 25, | |
| /* Destination connection point for the selected stream */ | |
| CONTROL_PARAM_STREAM_DEST_CONN_POINT = 26, | |
| /* Number of audio channels in the selected stream */ | |
| CONTROL_PARAM_STREAMS_CHANNELS = 27, | |
| /*Enable control for the selected stream */ | |
| CONTROL_PARAM_STREAM_CONTROL = 28, | |
| /* Connection Point Control */ | |
| /* Select connection point with the given ID */ | |
| CONTROL_PARAM_CONN_POINT_ID = 29, | |
| /* Connection point sample rate */ | |
| CONTROL_PARAM_CONN_POINT_SAMPLE_RATE = 30, | |
| /* Node Control */ | |
| /* Select HDA node with the given ID */ | |
| CONTROL_PARAM_NODE_ID = 31 | |
| }; | |
| /* | |
| * Dsp Io Status codes | |
| */ | |
| enum hda_vendor_status_dspio { | |
| /* Success */ | |
| VENDOR_STATUS_DSPIO_OK = 0x00, | |
| /* Busy, unable to accept new command, the host must retry */ | |
| VENDOR_STATUS_DSPIO_BUSY = 0x01, | |
| /* SCP command queue is full */ | |
| VENDOR_STATUS_DSPIO_SCP_COMMAND_QUEUE_FULL = 0x02, | |
| /* SCP response queue is empty */ | |
| VENDOR_STATUS_DSPIO_SCP_RESPONSE_QUEUE_EMPTY = 0x03 | |
| }; | |
| /* | |
| * Chip Io Status codes | |
| */ | |
| enum hda_vendor_status_chipio { | |
| /* Success */ | |
| VENDOR_STATUS_CHIPIO_OK = 0x00, | |
| /* Busy, unable to accept new command, the host must retry */ | |
| VENDOR_STATUS_CHIPIO_BUSY = 0x01 | |
| }; | |
| /* | |
| * CA0132 sample rate | |
| */ | |
| enum ca0132_sample_rate { | |
| SR_6_000 = 0x00, | |
| SR_8_000 = 0x01, | |
| SR_9_600 = 0x02, | |
| SR_11_025 = 0x03, | |
| SR_16_000 = 0x04, | |
| SR_22_050 = 0x05, | |
| SR_24_000 = 0x06, | |
| SR_32_000 = 0x07, | |
| SR_44_100 = 0x08, | |
| SR_48_000 = 0x09, | |
| SR_88_200 = 0x0A, | |
| SR_96_000 = 0x0B, | |
| SR_144_000 = 0x0C, | |
| SR_176_400 = 0x0D, | |
| SR_192_000 = 0x0E, | |
| SR_384_000 = 0x0F, | |
| SR_COUNT = 0x10, | |
| SR_RATE_UNKNOWN = 0x1F | |
| }; | |
| enum dsp_download_state { | |
| DSP_DOWNLOAD_FAILED = -1, | |
| DSP_DOWNLOAD_INIT = 0, | |
| DSP_DOWNLOADING = 1, | |
| DSP_DOWNLOADED = 2 | |
| }; | |
| /* retrieve parameters from hda format */ | |
| #define get_hdafmt_chs(fmt) (fmt & 0xf) | |
| #define get_hdafmt_bits(fmt) ((fmt >> 4) & 0x7) | |
| #define get_hdafmt_rate(fmt) ((fmt >> 8) & 0x7f) | |
| #define get_hdafmt_type(fmt) ((fmt >> 15) & 0x1) | |
| /* | |
| * CA0132 specific | |
| */ | |
| struct ca0132_spec { | |
| struct hda_gen_spec gen; | |
| const struct snd_kcontrol_new *mixers[5]; | |
| unsigned int num_mixers; | |
| const struct hda_verb *base_init_verbs; | |
| const struct hda_verb *base_exit_verbs; | |
| const struct hda_verb *chip_init_verbs; | |
| const struct hda_verb *desktop_init_verbs; | |
| struct hda_verb *spec_init_verbs; | |
| struct auto_pin_cfg autocfg; | |
| /* Nodes configurations */ | |
| struct hda_multi_out multiout; | |
| hda_nid_t out_pins[AUTO_CFG_MAX_OUTS]; | |
| hda_nid_t dacs[AUTO_CFG_MAX_OUTS]; | |
| unsigned int num_outputs; | |
| hda_nid_t input_pins[AUTO_PIN_LAST]; | |
| hda_nid_t adcs[AUTO_PIN_LAST]; | |
| hda_nid_t dig_out; | |
| hda_nid_t dig_in; | |
| unsigned int num_inputs; | |
| hda_nid_t shared_mic_nid; | |
| hda_nid_t shared_out_nid; | |
| hda_nid_t unsol_tag_hp; | |
| hda_nid_t unsol_tag_front_hp; /* for desktop ca0132 codecs */ | |
| hda_nid_t unsol_tag_amic1; | |
| /* chip access */ | |
| struct mutex chipio_mutex; /* chip access mutex */ | |
| u32 curr_chip_addx; | |
| /* DSP download related */ | |
| enum dsp_download_state dsp_state; | |
| unsigned int dsp_stream_id; | |
| unsigned int wait_scp; | |
| unsigned int wait_scp_header; | |
| unsigned int wait_num_data; | |
| unsigned int scp_resp_header; | |
| unsigned int scp_resp_data[4]; | |
| unsigned int scp_resp_count; | |
| bool startup_check_entered; | |
| bool dsp_reload; | |
| /* mixer and effects related */ | |
| unsigned char dmic_ctl; | |
| int cur_out_type; | |
| int cur_mic_type; | |
| long vnode_lvol[VNODES_COUNT]; | |
| long vnode_rvol[VNODES_COUNT]; | |
| long vnode_lswitch[VNODES_COUNT]; | |
| long vnode_rswitch[VNODES_COUNT]; | |
| long effects_switch[EFFECTS_COUNT]; | |
| long voicefx_val; | |
| long cur_mic_boost; | |
| /* ca0132_alt control related values */ | |
| unsigned char in_enum_val; | |
| unsigned char out_enum_val; | |
| unsigned char channel_cfg_val; | |
| unsigned char speaker_range_val[2]; | |
| unsigned char mic_boost_enum_val; | |
| unsigned char smart_volume_setting; | |
| unsigned char bass_redirection_val; | |
| long bass_redirect_xover_freq; | |
| long fx_ctl_val[EFFECT_LEVEL_SLIDERS]; | |
| long xbass_xover_freq; | |
| long eq_preset_val; | |
| unsigned int tlv[4]; | |
| struct hda_vmaster_mute_hook vmaster_mute; | |
| /* AE-5 Control values */ | |
| unsigned char ae5_headphone_gain_val; | |
| unsigned char ae5_filter_val; | |
| /* ZxR Control Values */ | |
| unsigned char zxr_gain_set; | |
| struct hda_codec *codec; | |
| struct delayed_work unsol_hp_work; | |
| #ifdef ENABLE_TUNING_CONTROLS | |
| long cur_ctl_vals[TUNING_CTLS_COUNT]; | |
| #endif | |
| /* | |
| * The Recon3D, Sound Blaster Z, Sound Blaster ZxR, and Sound Blaster | |
| * AE-5 all use PCI region 2 to toggle GPIO and other currently unknown | |
| * things. | |
| */ | |
| bool use_pci_mmio; | |
| void __iomem *mem_base; | |
| /* | |
| * Whether or not to use the alt functions like alt_select_out, | |
| * alt_select_in, etc. Only used on desktop codecs for now, because of | |
| * surround sound support. | |
| */ | |
| bool use_alt_functions; | |
| /* | |
| * Whether or not to use alt controls: volume effect sliders, EQ | |
| * presets, smart volume presets, and new control names with FX prefix. | |
| * Renames PlayEnhancement and CrystalVoice too. | |
| */ | |
| bool use_alt_controls; | |
| }; | |
| /* | |
| * CA0132 quirks table | |
| */ | |
| enum { | |
| QUIRK_ALIENWARE, | |
| QUIRK_ALIENWARE_M17XR4, | |
| QUIRK_SBZ, | |
| QUIRK_ZXR, | |
| QUIRK_ZXR_DBPRO, | |
| QUIRK_R3DI, | |
| QUIRK_R3D, | |
| QUIRK_AE5, | |
| QUIRK_AE7, | |
| QUIRK_GENERIC, | |
| QUIRK_NONE = HDA_FIXUP_ID_NOT_SET, | |
| }; | |
| #ifdef CONFIG_PCI | |
| #define ca0132_quirk(spec) ((spec)->codec->fixup_id) | |
| #define ca0132_use_pci_mmio(spec) ((spec)->use_pci_mmio) | |
| #define ca0132_use_alt_functions(spec) ((spec)->use_alt_functions) | |
| #define ca0132_use_alt_controls(spec) ((spec)->use_alt_controls) | |
| #else | |
| #define ca0132_quirk(spec) ({ (void)(spec); QUIRK_NONE; }) | |
| #define ca0132_use_alt_functions(spec) ({ (void)(spec); false; }) | |
| #define ca0132_use_pci_mmio(spec) ({ (void)(spec); false; }) | |
| #define ca0132_use_alt_controls(spec) ({ (void)(spec); false; }) | |
| #endif | |
| static const struct hda_pintbl alienware_pincfgs[] = { | |
| { 0x0b, 0x90170110 }, /* Builtin Speaker */ | |
| { 0x0c, 0x411111f0 }, /* N/A */ | |
| { 0x0d, 0x411111f0 }, /* N/A */ | |
| { 0x0e, 0x411111f0 }, /* N/A */ | |
| { 0x0f, 0x0321101f }, /* HP */ | |
| { 0x10, 0x411111f0 }, /* Headset? disabled for now */ | |
| { 0x11, 0x03a11021 }, /* Mic */ | |
| { 0x12, 0xd5a30140 }, /* Builtin Mic */ | |
| { 0x13, 0x411111f0 }, /* N/A */ | |
| { 0x18, 0x411111f0 }, /* N/A */ | |
| {} | |
| }; | |
| /* Sound Blaster Z pin configs taken from Windows Driver */ | |
| static const struct hda_pintbl sbz_pincfgs[] = { | |
| { 0x0b, 0x01017010 }, /* Port G -- Lineout FRONT L/R */ | |
| { 0x0c, 0x014510f0 }, /* SPDIF Out 1 */ | |
| { 0x0d, 0x014510f0 }, /* Digital Out */ | |
| { 0x0e, 0x01c510f0 }, /* SPDIF In */ | |
| { 0x0f, 0x0221701f }, /* Port A -- BackPanel HP */ | |
| { 0x10, 0x01017012 }, /* Port D -- Center/LFE or FP Hp */ | |
| { 0x11, 0x01017014 }, /* Port B -- LineMicIn2 / Rear L/R */ | |
| { 0x12, 0x01a170f0 }, /* Port C -- LineIn1 */ | |
| { 0x13, 0x908700f0 }, /* What U Hear In*/ | |
| { 0x18, 0x50d000f0 }, /* N/A */ | |
| {} | |
| }; | |
| /* Sound Blaster ZxR pin configs taken from Windows Driver */ | |
| static const struct hda_pintbl zxr_pincfgs[] = { | |
| { 0x0b, 0x01047110 }, /* Port G -- Lineout FRONT L/R */ | |
| { 0x0c, 0x414510f0 }, /* SPDIF Out 1 - Disabled*/ | |
| { 0x0d, 0x014510f0 }, /* Digital Out */ | |
| { 0x0e, 0x41c520f0 }, /* SPDIF In - Disabled*/ | |
| { 0x0f, 0x0122711f }, /* Port A -- BackPanel HP */ | |
| { 0x10, 0x01017111 }, /* Port D -- Center/LFE */ | |
| { 0x11, 0x01017114 }, /* Port B -- LineMicIn2 / Rear L/R */ | |
| { 0x12, 0x01a271f0 }, /* Port C -- LineIn1 */ | |
| { 0x13, 0x908700f0 }, /* What U Hear In*/ | |
| { 0x18, 0x50d000f0 }, /* N/A */ | |
| {} | |
| }; | |
| /* Recon3D pin configs taken from Windows Driver */ | |
| static const struct hda_pintbl r3d_pincfgs[] = { | |
| { 0x0b, 0x01014110 }, /* Port G -- Lineout FRONT L/R */ | |
| { 0x0c, 0x014510f0 }, /* SPDIF Out 1 */ | |
| { 0x0d, 0x014510f0 }, /* Digital Out */ | |
| { 0x0e, 0x01c520f0 }, /* SPDIF In */ | |
| { 0x0f, 0x0221401f }, /* Port A -- BackPanel HP */ | |
| { 0x10, 0x01016011 }, /* Port D -- Center/LFE or FP Hp */ | |
| { 0x11, 0x01011014 }, /* Port B -- LineMicIn2 / Rear L/R */ | |
| { 0x12, 0x02a090f0 }, /* Port C -- LineIn1 */ | |
| { 0x13, 0x908700f0 }, /* What U Hear In*/ | |
| { 0x18, 0x50d000f0 }, /* N/A */ | |
| {} | |
| }; | |
| /* Sound Blaster AE-5 pin configs taken from Windows Driver */ | |
| static const struct hda_pintbl ae5_pincfgs[] = { | |
| { 0x0b, 0x01017010 }, /* Port G -- Lineout FRONT L/R */ | |
| { 0x0c, 0x014510f0 }, /* SPDIF Out 1 */ | |
| { 0x0d, 0x014510f0 }, /* Digital Out */ | |
| { 0x0e, 0x01c510f0 }, /* SPDIF In */ | |
| { 0x0f, 0x01017114 }, /* Port A -- Rear L/R. */ | |
| { 0x10, 0x01017012 }, /* Port D -- Center/LFE or FP Hp */ | |
| { 0x11, 0x012170ff }, /* Port B -- LineMicIn2 / Rear Headphone */ | |
| { 0x12, 0x01a170f0 }, /* Port C -- LineIn1 */ | |
| { 0x13, 0x908700f0 }, /* What U Hear In*/ | |
| { 0x18, 0x50d000f0 }, /* N/A */ | |
| {} | |
| }; | |
| /* Recon3D integrated pin configs taken from Windows Driver */ | |
| static const struct hda_pintbl r3di_pincfgs[] = { | |
| { 0x0b, 0x01014110 }, /* Port G -- Lineout FRONT L/R */ | |
| { 0x0c, 0x014510f0 }, /* SPDIF Out 1 */ | |
| { 0x0d, 0x014510f0 }, /* Digital Out */ | |
| { 0x0e, 0x41c520f0 }, /* SPDIF In */ | |
| { 0x0f, 0x0221401f }, /* Port A -- BackPanel HP */ | |
| { 0x10, 0x01016011 }, /* Port D -- Center/LFE or FP Hp */ | |
| { 0x11, 0x01011014 }, /* Port B -- LineMicIn2 / Rear L/R */ | |
| { 0x12, 0x02a090f0 }, /* Port C -- LineIn1 */ | |
| { 0x13, 0x908700f0 }, /* What U Hear In*/ | |
| { 0x18, 0x500000f0 }, /* N/A */ | |
| {} | |
| }; | |
| static const struct hda_pintbl ae7_pincfgs[] = { | |
| { 0x0b, 0x01017010 }, | |
| { 0x0c, 0x014510f0 }, | |
| { 0x0d, 0x414510f0 }, | |
| { 0x0e, 0x01c520f0 }, | |
| { 0x0f, 0x01017114 }, | |
| { 0x10, 0x01017011 }, | |
| { 0x11, 0x018170ff }, | |
| { 0x12, 0x01a170f0 }, | |
| { 0x13, 0x908700f0 }, | |
| { 0x18, 0x500000f0 }, | |
| {} | |
| }; | |
| static const struct hda_pintbl ca0132_generic_pincfgs[] = { | |
| { 0x0b, 0x41014111 }, | |
| { 0x0c, 0x414520f0 }, /* SPDIF out */ | |
| { 0x0d, 0x01014010 }, /* lineout */ | |
| { 0x0e, 0x41c501f0 }, | |
| { 0x0f, 0x411111f0 }, /* disabled */ | |
| { 0x10, 0x411111f0 }, /* disabled */ | |
| { 0x11, 0x41012014 }, | |
| { 0x12, 0x37a790f0 }, /* mic */ | |
| { 0x13, 0x77a701f0 }, | |
| { 0x18, 0x500000f0 }, | |
| {} | |
| }; | |
| static const struct hda_quirk ca0132_quirks[] = { | |
| SND_PCI_QUIRK(0x1028, 0x057b, "Alienware M17x R4", QUIRK_ALIENWARE_M17XR4), | |
| SND_PCI_QUIRK(0x1028, 0x0685, "Alienware 15 2015", QUIRK_ALIENWARE), | |
| SND_PCI_QUIRK(0x1028, 0x0688, "Alienware 17 2015", QUIRK_ALIENWARE), | |
| SND_PCI_QUIRK(0x1028, 0x0708, "Alienware 15 R2 2016", QUIRK_ALIENWARE), | |
| SND_PCI_QUIRK(0x1102, 0x0010, "Sound Blaster Z", QUIRK_SBZ), | |
| SND_PCI_QUIRK(0x1102, 0x0023, "Sound Blaster Z", QUIRK_SBZ), | |
| SND_PCI_QUIRK(0x1102, 0x0027, "Sound Blaster Z", QUIRK_SBZ), | |
| SND_PCI_QUIRK(0x1102, 0x0033, "Sound Blaster ZxR", QUIRK_SBZ), | |
| SND_PCI_QUIRK(0x1458, 0xA016, "Recon3Di", QUIRK_R3DI), | |
| SND_PCI_QUIRK(0x1458, 0xA026, "Gigabyte G1.Sniper Z97", QUIRK_R3DI), | |
| SND_PCI_QUIRK(0x1458, 0xA036, "Gigabyte GA-Z170X-Gaming 7", QUIRK_R3DI), | |
| SND_PCI_QUIRK(0x1458, 0xA046, "Gigabyte GA-Z170X-Gaming G1", QUIRK_GENERIC), | |
| SND_PCI_QUIRK(0x3842, 0x1038, "EVGA X99 Classified", QUIRK_R3DI), | |
| SND_PCI_QUIRK(0x3842, 0x104b, "EVGA X299 Dark", QUIRK_R3DI), | |
| SND_PCI_QUIRK(0x3842, 0x1055, "EVGA Z390 DARK", QUIRK_R3DI), | |
| SND_PCI_QUIRK(0x1102, 0x0013, "Recon3D", QUIRK_R3D), | |
| SND_PCI_QUIRK(0x1102, 0x0018, "Recon3D", QUIRK_R3D), | |
| SND_PCI_QUIRK(0x1102, 0x0051, "Sound Blaster AE-5", QUIRK_AE5), | |
| SND_PCI_QUIRK(0x1102, 0x0191, "Sound Blaster AE-5 Plus", QUIRK_AE5), | |
| SND_PCI_QUIRK(0x1102, 0x0081, "Sound Blaster AE-7", QUIRK_AE7), | |
| {} | |
| }; | |
| static const struct hda_model_fixup ca0132_quirk_models[] = { | |
| { .id = QUIRK_ALIENWARE, .name = "alienware" }, | |
| { .id = QUIRK_ALIENWARE_M17XR4, .name = "alienware-m17xr4" }, | |
| { .id = QUIRK_SBZ, .name = "sbz" }, | |
| { .id = QUIRK_ZXR, .name = "zxr" }, | |
| { .id = QUIRK_ZXR_DBPRO, .name = "zxr-dbpro" }, | |
| { .id = QUIRK_R3DI, .name = "r3di" }, | |
| { .id = QUIRK_R3D, .name = "r3d" }, | |
| { .id = QUIRK_AE5, .name = "ae5" }, | |
| { .id = QUIRK_AE7, .name = "ae7" }, | |
| { .id = QUIRK_GENERIC, .name = "generic" }, | |
| {} | |
| }; | |
| /* Output selection quirk info structures. */ | |
| #define MAX_QUIRK_MMIO_GPIO_SET_VALS 3 | |
| #define MAX_QUIRK_SCP_SET_VALS 2 | |
| struct ca0132_alt_out_set_info { | |
| unsigned int dac2port; /* ParamID 0x0d value. */ | |
| bool has_hda_gpio; | |
| char hda_gpio_pin; | |
| char hda_gpio_set; | |
| unsigned int mmio_gpio_count; | |
| char mmio_gpio_pin[MAX_QUIRK_MMIO_GPIO_SET_VALS]; | |
| char mmio_gpio_set[MAX_QUIRK_MMIO_GPIO_SET_VALS]; | |
| unsigned int scp_cmds_count; | |
| unsigned int scp_cmd_mid[MAX_QUIRK_SCP_SET_VALS]; | |
| unsigned int scp_cmd_req[MAX_QUIRK_SCP_SET_VALS]; | |
| unsigned int scp_cmd_val[MAX_QUIRK_SCP_SET_VALS]; | |
| bool has_chipio_write; | |
| unsigned int chipio_write_addr; | |
| unsigned int chipio_write_data; | |
| }; | |
| struct ca0132_alt_out_set_quirk_data { | |
| int quirk_id; | |
| bool has_headphone_gain; | |
| bool is_ae_series; | |
| struct ca0132_alt_out_set_info out_set_info[NUM_OF_OUTPUTS]; | |
| }; | |
| static const struct ca0132_alt_out_set_quirk_data quirk_out_set_data[] = { | |
| { .quirk_id = QUIRK_R3DI, | |
| .has_headphone_gain = false, | |
| .is_ae_series = false, | |
| .out_set_info = { | |
| /* Speakers. */ | |
| { .dac2port = 0x24, | |
| .has_hda_gpio = true, | |
| .hda_gpio_pin = 2, | |
| .hda_gpio_set = 1, | |
| .mmio_gpio_count = 0, | |
| .scp_cmds_count = 0, | |
| .has_chipio_write = false, | |
| }, | |
| /* Headphones. */ | |
| { .dac2port = 0x21, | |
| .has_hda_gpio = true, | |
| .hda_gpio_pin = 2, | |
| .hda_gpio_set = 0, | |
| .mmio_gpio_count = 0, | |
| .scp_cmds_count = 0, | |
| .has_chipio_write = false, | |
| } }, | |
| }, | |
| { .quirk_id = QUIRK_R3D, | |
| .has_headphone_gain = false, | |
| .is_ae_series = false, | |
| .out_set_info = { | |
| /* Speakers. */ | |
| { .dac2port = 0x24, | |
| .has_hda_gpio = false, | |
| .mmio_gpio_count = 1, | |
| .mmio_gpio_pin = { 1 }, | |
| .mmio_gpio_set = { 1 }, | |
| .scp_cmds_count = 0, | |
| .has_chipio_write = false, | |
| }, | |
| /* Headphones. */ | |
| { .dac2port = 0x21, | |
| .has_hda_gpio = false, | |
| .mmio_gpio_count = 1, | |
| .mmio_gpio_pin = { 1 }, | |
| .mmio_gpio_set = { 0 }, | |
| .scp_cmds_count = 0, | |
| .has_chipio_write = false, | |
| } }, | |
| }, | |
| { .quirk_id = QUIRK_SBZ, | |
| .has_headphone_gain = false, | |
| .is_ae_series = false, | |
| .out_set_info = { | |
| /* Speakers. */ | |
| { .dac2port = 0x18, | |
| .has_hda_gpio = false, | |
| .mmio_gpio_count = 3, | |
| .mmio_gpio_pin = { 7, 4, 1 }, | |
| .mmio_gpio_set = { 0, 1, 1 }, | |
| .scp_cmds_count = 0, | |
| .has_chipio_write = false, }, | |
| /* Headphones. */ | |
| { .dac2port = 0x12, | |
| .has_hda_gpio = false, | |
| .mmio_gpio_count = 3, | |
| .mmio_gpio_pin = { 7, 4, 1 }, | |
| .mmio_gpio_set = { 1, 1, 0 }, | |
| .scp_cmds_count = 0, | |
| .has_chipio_write = false, | |
| } }, | |
| }, | |
| { .quirk_id = QUIRK_ZXR, | |
| .has_headphone_gain = true, | |
| .is_ae_series = false, | |
| .out_set_info = { | |
| /* Speakers. */ | |
| { .dac2port = 0x24, | |
| .has_hda_gpio = false, | |
| .mmio_gpio_count = 3, | |
| .mmio_gpio_pin = { 2, 3, 5 }, | |
| .mmio_gpio_set = { 1, 1, 0 }, | |
| .scp_cmds_count = 0, | |
| .has_chipio_write = false, | |
| }, | |
| /* Headphones. */ | |
| { .dac2port = 0x21, | |
| .has_hda_gpio = false, | |
| .mmio_gpio_count = 3, | |
| .mmio_gpio_pin = { 2, 3, 5 }, | |
| .mmio_gpio_set = { 0, 1, 1 }, | |
| .scp_cmds_count = 0, | |
| .has_chipio_write = false, | |
| } }, | |
| }, | |
| { .quirk_id = QUIRK_AE5, | |
| .has_headphone_gain = true, | |
| .is_ae_series = true, | |
| .out_set_info = { | |
| /* Speakers. */ | |
| { .dac2port = 0xa4, | |
| .has_hda_gpio = false, | |
| .mmio_gpio_count = 0, | |
| .scp_cmds_count = 2, | |
| .scp_cmd_mid = { 0x96, 0x96 }, | |
| .scp_cmd_req = { SPEAKER_TUNING_FRONT_LEFT_INVERT, | |
| SPEAKER_TUNING_FRONT_RIGHT_INVERT }, | |
| .scp_cmd_val = { FLOAT_ZERO, FLOAT_ZERO }, | |
| .has_chipio_write = true, | |
| .chipio_write_addr = 0x0018b03c, | |
| .chipio_write_data = 0x00000012 | |
| }, | |
| /* Headphones. */ | |
| { .dac2port = 0xa1, | |
| .has_hda_gpio = false, | |
| .mmio_gpio_count = 0, | |
| .scp_cmds_count = 2, | |
| .scp_cmd_mid = { 0x96, 0x96 }, | |
| .scp_cmd_req = { SPEAKER_TUNING_FRONT_LEFT_INVERT, | |
| SPEAKER_TUNING_FRONT_RIGHT_INVERT }, | |
| .scp_cmd_val = { FLOAT_ONE, FLOAT_ONE }, | |
| .has_chipio_write = true, | |
| .chipio_write_addr = 0x0018b03c, | |
| .chipio_write_data = 0x00000012 | |
| } }, | |
| }, | |
| { .quirk_id = QUIRK_AE7, | |
| .has_headphone_gain = true, | |
| .is_ae_series = true, | |
| .out_set_info = { | |
| /* Speakers. */ | |
| { .dac2port = 0x58, | |
| .has_hda_gpio = false, | |
| .mmio_gpio_count = 1, | |
| .mmio_gpio_pin = { 0 }, | |
| .mmio_gpio_set = { 1 }, | |
| .scp_cmds_count = 2, | |
| .scp_cmd_mid = { 0x96, 0x96 }, | |
| .scp_cmd_req = { SPEAKER_TUNING_FRONT_LEFT_INVERT, | |
| SPEAKER_TUNING_FRONT_RIGHT_INVERT }, | |
| .scp_cmd_val = { FLOAT_ZERO, FLOAT_ZERO }, | |
| .has_chipio_write = true, | |
| .chipio_write_addr = 0x0018b03c, | |
| .chipio_write_data = 0x00000000 | |
| }, | |
| /* Headphones. */ | |
| { .dac2port = 0x58, | |
| .has_hda_gpio = false, | |
| .mmio_gpio_count = 1, | |
| .mmio_gpio_pin = { 0 }, | |
| .mmio_gpio_set = { 1 }, | |
| .scp_cmds_count = 2, | |
| .scp_cmd_mid = { 0x96, 0x96 }, | |
| .scp_cmd_req = { SPEAKER_TUNING_FRONT_LEFT_INVERT, | |
| SPEAKER_TUNING_FRONT_RIGHT_INVERT }, | |
| .scp_cmd_val = { FLOAT_ONE, FLOAT_ONE }, | |
| .has_chipio_write = true, | |
| .chipio_write_addr = 0x0018b03c, | |
| .chipio_write_data = 0x00000010 | |
| } }, | |
| } | |
| }; | |
| /* | |
| * CA0132 codec access | |
| */ | |
| static unsigned int codec_send_command(struct hda_codec *codec, hda_nid_t nid, | |
| unsigned int verb, unsigned int parm, unsigned int *res) | |
| { | |
| unsigned int response; | |
| response = snd_hda_codec_read(codec, nid, 0, verb, parm); | |
| *res = response; | |
| return ((response == -1) ? -1 : 0); | |
| } | |
| static int codec_set_converter_format(struct hda_codec *codec, hda_nid_t nid, | |
| unsigned short converter_format, unsigned int *res) | |
| { | |
| return codec_send_command(codec, nid, VENDOR_CHIPIO_STREAM_FORMAT, | |
| converter_format & 0xffff, res); | |
| } | |
| static int codec_set_converter_stream_channel(struct hda_codec *codec, | |
| hda_nid_t nid, unsigned char stream, | |
| unsigned char channel, unsigned int *res) | |
| { | |
| unsigned char converter_stream_channel = 0; | |
| converter_stream_channel = (stream << 4) | (channel & 0x0f); | |
| return codec_send_command(codec, nid, AC_VERB_SET_CHANNEL_STREAMID, | |
| converter_stream_channel, res); | |
| } | |
| /* Chip access helper function */ | |
| static int chipio_send(struct hda_codec *codec, | |
| unsigned int reg, | |
| unsigned int data) | |
| { | |
| unsigned int res; | |
| unsigned long timeout = jiffies + msecs_to_jiffies(1000); | |
| /* send bits of data specified by reg */ | |
| do { | |
| res = snd_hda_codec_read(codec, WIDGET_CHIP_CTRL, 0, | |
| reg, data); | |
| if (res == VENDOR_STATUS_CHIPIO_OK) | |
| return 0; | |
| msleep(20); | |
| } while (time_before(jiffies, timeout)); | |
| return -EIO; | |
| } | |
| /* | |
| * Write chip address through the vendor widget -- NOT protected by the Mutex! | |
| */ | |
| static int chipio_write_address(struct hda_codec *codec, | |
| unsigned int chip_addx) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int res; | |
| if (spec->curr_chip_addx == chip_addx) | |
| return 0; | |
| /* send low 16 bits of the address */ | |
| res = chipio_send(codec, VENDOR_CHIPIO_ADDRESS_LOW, | |
| chip_addx & 0xffff); | |
| if (res != -EIO) { | |
| /* send high 16 bits of the address */ | |
| res = chipio_send(codec, VENDOR_CHIPIO_ADDRESS_HIGH, | |
| chip_addx >> 16); | |
| } | |
| spec->curr_chip_addx = (res < 0) ? ~0U : chip_addx; | |
| return res; | |
| } | |
| /* | |
| * Write data through the vendor widget -- NOT protected by the Mutex! | |
| */ | |
| static int chipio_write_data(struct hda_codec *codec, unsigned int data) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int res; | |
| /* send low 16 bits of the data */ | |
| res = chipio_send(codec, VENDOR_CHIPIO_DATA_LOW, data & 0xffff); | |
| if (res != -EIO) { | |
| /* send high 16 bits of the data */ | |
| res = chipio_send(codec, VENDOR_CHIPIO_DATA_HIGH, | |
| data >> 16); | |
| } | |
| /*If no error encountered, automatically increment the address | |
| as per chip behaviour*/ | |
| spec->curr_chip_addx = (res != -EIO) ? | |
| (spec->curr_chip_addx + 4) : ~0U; | |
| return res; | |
| } | |
| /* | |
| * Write multiple data through the vendor widget -- NOT protected by the Mutex! | |
| */ | |
| static int chipio_write_data_multiple(struct hda_codec *codec, | |
| const u32 *data, | |
| unsigned int count) | |
| { | |
| int status = 0; | |
| if (data == NULL) { | |
| codec_dbg(codec, "chipio_write_data null ptr\n"); | |
| return -EINVAL; | |
| } | |
| while ((count-- != 0) && (status == 0)) | |
| status = chipio_write_data(codec, *data++); | |
| return status; | |
| } | |
| /* | |
| * Read data through the vendor widget -- NOT protected by the Mutex! | |
| */ | |
| static int chipio_read_data(struct hda_codec *codec, unsigned int *data) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int res; | |
| /* post read */ | |
| res = chipio_send(codec, VENDOR_CHIPIO_HIC_POST_READ, 0); | |
| if (res != -EIO) { | |
| /* read status */ | |
| res = chipio_send(codec, VENDOR_CHIPIO_STATUS, 0); | |
| } | |
| if (res != -EIO) { | |
| /* read data */ | |
| *data = snd_hda_codec_read(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_HIC_READ_DATA, | |
| 0); | |
| } | |
| /*If no error encountered, automatically increment the address | |
| as per chip behaviour*/ | |
| spec->curr_chip_addx = (res != -EIO) ? | |
| (spec->curr_chip_addx + 4) : ~0U; | |
| return res; | |
| } | |
| /* | |
| * Write given value to the given address through the chip I/O widget. | |
| * protected by the Mutex | |
| */ | |
| static int chipio_write(struct hda_codec *codec, | |
| unsigned int chip_addx, const unsigned int data) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int err; | |
| guard(mutex)(&spec->chipio_mutex); | |
| /* write the address, and if successful proceed to write data */ | |
| err = chipio_write_address(codec, chip_addx); | |
| if (err < 0) | |
| return err; | |
| return chipio_write_data(codec, data); | |
| } | |
| /* | |
| * Write given value to the given address through the chip I/O widget. | |
| * not protected by the Mutex | |
| */ | |
| static int chipio_write_no_mutex(struct hda_codec *codec, | |
| unsigned int chip_addx, const unsigned int data) | |
| { | |
| int err; | |
| /* write the address, and if successful proceed to write data */ | |
| err = chipio_write_address(codec, chip_addx); | |
| if (err < 0) | |
| goto exit; | |
| err = chipio_write_data(codec, data); | |
| if (err < 0) | |
| goto exit; | |
| exit: | |
| return err; | |
| } | |
| /* | |
| * Write multiple values to the given address through the chip I/O widget. | |
| * protected by the Mutex | |
| */ | |
| static int chipio_write_multiple(struct hda_codec *codec, | |
| u32 chip_addx, | |
| const u32 *data, | |
| unsigned int count) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int status; | |
| guard(mutex)(&spec->chipio_mutex); | |
| status = chipio_write_address(codec, chip_addx); | |
| if (status < 0) | |
| return status; | |
| return chipio_write_data_multiple(codec, data, count); | |
| } | |
| /* | |
| * Read the given address through the chip I/O widget | |
| * protected by the Mutex | |
| */ | |
| static int chipio_read(struct hda_codec *codec, | |
| unsigned int chip_addx, unsigned int *data) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int err; | |
| guard(mutex)(&spec->chipio_mutex); | |
| /* write the address, and if successful proceed to write data */ | |
| err = chipio_write_address(codec, chip_addx); | |
| if (err < 0) | |
| return err; | |
| return chipio_read_data(codec, data); | |
| } | |
| /* | |
| * Set chip control flags through the chip I/O widget. | |
| */ | |
| static void chipio_set_control_flag(struct hda_codec *codec, | |
| enum control_flag_id flag_id, | |
| bool flag_state) | |
| { | |
| unsigned int val; | |
| unsigned int flag_bit; | |
| flag_bit = (flag_state ? 1 : 0); | |
| val = (flag_bit << 7) | (flag_id); | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_FLAG_SET, val); | |
| } | |
| /* | |
| * Set chip parameters through the chip I/O widget. | |
| */ | |
| static void chipio_set_control_param(struct hda_codec *codec, | |
| enum control_param_id param_id, int param_val) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int val; | |
| if ((param_id < 32) && (param_val < 8)) { | |
| val = (param_val << 5) | (param_id); | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_PARAM_SET, val); | |
| } else { | |
| guard(mutex)(&spec->chipio_mutex); | |
| if (chipio_send(codec, VENDOR_CHIPIO_STATUS, 0) == 0) { | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_PARAM_EX_ID_SET, | |
| param_id); | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_PARAM_EX_VALUE_SET, | |
| param_val); | |
| } | |
| } | |
| } | |
| /* | |
| * Set chip parameters through the chip I/O widget. NO MUTEX. | |
| */ | |
| static void chipio_set_control_param_no_mutex(struct hda_codec *codec, | |
| enum control_param_id param_id, int param_val) | |
| { | |
| int val; | |
| if ((param_id < 32) && (param_val < 8)) { | |
| val = (param_val << 5) | (param_id); | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_PARAM_SET, val); | |
| } else { | |
| if (chipio_send(codec, VENDOR_CHIPIO_STATUS, 0) == 0) { | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_PARAM_EX_ID_SET, | |
| param_id); | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_PARAM_EX_VALUE_SET, | |
| param_val); | |
| } | |
| } | |
| } | |
| /* | |
| * Connect stream to a source point, and then connect | |
| * that source point to a destination point. | |
| */ | |
| static void chipio_set_stream_source_dest(struct hda_codec *codec, | |
| int streamid, int source_point, int dest_point) | |
| { | |
| chipio_set_control_param_no_mutex(codec, | |
| CONTROL_PARAM_STREAM_ID, streamid); | |
| chipio_set_control_param_no_mutex(codec, | |
| CONTROL_PARAM_STREAM_SOURCE_CONN_POINT, source_point); | |
| chipio_set_control_param_no_mutex(codec, | |
| CONTROL_PARAM_STREAM_DEST_CONN_POINT, dest_point); | |
| } | |
| /* | |
| * Set number of channels in the selected stream. | |
| */ | |
| static void chipio_set_stream_channels(struct hda_codec *codec, | |
| int streamid, unsigned int channels) | |
| { | |
| chipio_set_control_param_no_mutex(codec, | |
| CONTROL_PARAM_STREAM_ID, streamid); | |
| chipio_set_control_param_no_mutex(codec, | |
| CONTROL_PARAM_STREAMS_CHANNELS, channels); | |
| } | |
| /* | |
| * Enable/Disable audio stream. | |
| */ | |
| static void chipio_set_stream_control(struct hda_codec *codec, | |
| int streamid, int enable) | |
| { | |
| chipio_set_control_param_no_mutex(codec, | |
| CONTROL_PARAM_STREAM_ID, streamid); | |
| chipio_set_control_param_no_mutex(codec, | |
| CONTROL_PARAM_STREAM_CONTROL, enable); | |
| } | |
| /* | |
| * Get ChipIO audio stream's status. | |
| */ | |
| static void chipio_get_stream_control(struct hda_codec *codec, | |
| int streamid, unsigned int *enable) | |
| { | |
| chipio_set_control_param_no_mutex(codec, | |
| CONTROL_PARAM_STREAM_ID, streamid); | |
| *enable = snd_hda_codec_read(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_PARAM_GET, | |
| CONTROL_PARAM_STREAM_CONTROL); | |
| } | |
| /* | |
| * Set sampling rate of the connection point. NO MUTEX. | |
| */ | |
| static void chipio_set_conn_rate_no_mutex(struct hda_codec *codec, | |
| int connid, enum ca0132_sample_rate rate) | |
| { | |
| chipio_set_control_param_no_mutex(codec, | |
| CONTROL_PARAM_CONN_POINT_ID, connid); | |
| chipio_set_control_param_no_mutex(codec, | |
| CONTROL_PARAM_CONN_POINT_SAMPLE_RATE, rate); | |
| } | |
| /* | |
| * Set sampling rate of the connection point. | |
| */ | |
| static void chipio_set_conn_rate(struct hda_codec *codec, | |
| int connid, enum ca0132_sample_rate rate) | |
| { | |
| chipio_set_control_param(codec, CONTROL_PARAM_CONN_POINT_ID, connid); | |
| chipio_set_control_param(codec, CONTROL_PARAM_CONN_POINT_SAMPLE_RATE, | |
| rate); | |
| } | |
| /* | |
| * Writes to the 8051's internal address space directly instead of indirectly, | |
| * giving access to the special function registers located at addresses | |
| * 0x80-0xFF. | |
| */ | |
| static void chipio_8051_write_direct(struct hda_codec *codec, | |
| unsigned int addr, unsigned int data) | |
| { | |
| unsigned int verb; | |
| verb = VENDOR_CHIPIO_8051_WRITE_DIRECT | data; | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, verb, addr); | |
| } | |
| /* | |
| * Writes to the 8051's exram, which has 16-bits of address space. | |
| * Data at addresses 0x2000-0x7fff is mirrored to 0x8000-0xdfff. | |
| * Data at 0x8000-0xdfff can also be used as program memory for the 8051 by | |
| * setting the pmem bank selection SFR. | |
| * 0xe000-0xffff is always mapped as program memory, with only 0xf000-0xffff | |
| * being writable. | |
| */ | |
| static void chipio_8051_set_address(struct hda_codec *codec, unsigned int addr) | |
| { | |
| unsigned int tmp; | |
| /* Lower 8-bits. */ | |
| tmp = addr & 0xff; | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_8051_ADDRESS_LOW, tmp); | |
| /* Upper 8-bits. */ | |
| tmp = (addr >> 8) & 0xff; | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_8051_ADDRESS_HIGH, tmp); | |
| } | |
| static void chipio_8051_set_data(struct hda_codec *codec, unsigned int data) | |
| { | |
| /* 8-bits of data. */ | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_8051_DATA_WRITE, data & 0xff); | |
| } | |
| static unsigned int chipio_8051_get_data(struct hda_codec *codec) | |
| { | |
| return snd_hda_codec_read(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_8051_DATA_READ, 0); | |
| } | |
| /* PLL_PMU writes share the lower address register of the 8051 exram writes. */ | |
| static void chipio_8051_set_data_pll(struct hda_codec *codec, unsigned int data) | |
| { | |
| /* 8-bits of data. */ | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_PLL_PMU_WRITE, data & 0xff); | |
| } | |
| static void chipio_8051_write_exram(struct hda_codec *codec, | |
| unsigned int addr, unsigned int data) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| guard(mutex)(&spec->chipio_mutex); | |
| chipio_8051_set_address(codec, addr); | |
| chipio_8051_set_data(codec, data); | |
| } | |
| static void chipio_8051_write_exram_no_mutex(struct hda_codec *codec, | |
| unsigned int addr, unsigned int data) | |
| { | |
| chipio_8051_set_address(codec, addr); | |
| chipio_8051_set_data(codec, data); | |
| } | |
| /* Readback data from the 8051's exram. No mutex. */ | |
| static void chipio_8051_read_exram(struct hda_codec *codec, | |
| unsigned int addr, unsigned int *data) | |
| { | |
| chipio_8051_set_address(codec, addr); | |
| *data = chipio_8051_get_data(codec); | |
| } | |
| static void chipio_8051_write_pll_pmu(struct hda_codec *codec, | |
| unsigned int addr, unsigned int data) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| guard(mutex)(&spec->chipio_mutex); | |
| chipio_8051_set_address(codec, addr & 0xff); | |
| chipio_8051_set_data_pll(codec, data); | |
| } | |
| static void chipio_8051_write_pll_pmu_no_mutex(struct hda_codec *codec, | |
| unsigned int addr, unsigned int data) | |
| { | |
| chipio_8051_set_address(codec, addr & 0xff); | |
| chipio_8051_set_data_pll(codec, data); | |
| } | |
| /* | |
| * Enable clocks. | |
| */ | |
| static void chipio_enable_clocks(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| guard(mutex)(&spec->chipio_mutex); | |
| chipio_8051_write_pll_pmu_no_mutex(codec, 0x00, 0xff); | |
| chipio_8051_write_pll_pmu_no_mutex(codec, 0x05, 0x0b); | |
| chipio_8051_write_pll_pmu_no_mutex(codec, 0x06, 0xff); | |
| } | |
| /* | |
| * CA0132 DSP IO stuffs | |
| */ | |
| static int dspio_send(struct hda_codec *codec, unsigned int reg, | |
| unsigned int data) | |
| { | |
| int res; | |
| unsigned long timeout = jiffies + msecs_to_jiffies(1000); | |
| /* send bits of data specified by reg to dsp */ | |
| do { | |
| res = snd_hda_codec_read(codec, WIDGET_DSP_CTRL, 0, reg, data); | |
| if ((res >= 0) && (res != VENDOR_STATUS_DSPIO_BUSY)) | |
| return res; | |
| msleep(20); | |
| } while (time_before(jiffies, timeout)); | |
| return -EIO; | |
| } | |
| /* | |
| * Wait for DSP to be ready for commands | |
| */ | |
| static void dspio_write_wait(struct hda_codec *codec) | |
| { | |
| int status; | |
| unsigned long timeout = jiffies + msecs_to_jiffies(1000); | |
| do { | |
| status = snd_hda_codec_read(codec, WIDGET_DSP_CTRL, 0, | |
| VENDOR_DSPIO_STATUS, 0); | |
| if ((status == VENDOR_STATUS_DSPIO_OK) || | |
| (status == VENDOR_STATUS_DSPIO_SCP_RESPONSE_QUEUE_EMPTY)) | |
| break; | |
| msleep(1); | |
| } while (time_before(jiffies, timeout)); | |
| } | |
| /* | |
| * Write SCP data to DSP | |
| */ | |
| static int dspio_write(struct hda_codec *codec, unsigned int scp_data) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int status; | |
| dspio_write_wait(codec); | |
| guard(mutex)(&spec->chipio_mutex); | |
| status = dspio_send(codec, VENDOR_DSPIO_SCP_WRITE_DATA_LOW, | |
| scp_data & 0xffff); | |
| if (status < 0) | |
| return status; | |
| status = dspio_send(codec, VENDOR_DSPIO_SCP_WRITE_DATA_HIGH, | |
| scp_data >> 16); | |
| if (status < 0) | |
| return status; | |
| /* OK, now check if the write itself has executed*/ | |
| status = snd_hda_codec_read(codec, WIDGET_DSP_CTRL, 0, | |
| VENDOR_DSPIO_STATUS, 0); | |
| return (status == VENDOR_STATUS_DSPIO_SCP_COMMAND_QUEUE_FULL) ? | |
| -EIO : 0; | |
| } | |
| /* | |
| * Write multiple SCP data to DSP | |
| */ | |
| static int dspio_write_multiple(struct hda_codec *codec, | |
| unsigned int *buffer, unsigned int size) | |
| { | |
| int status = 0; | |
| unsigned int count; | |
| if (buffer == NULL) | |
| return -EINVAL; | |
| count = 0; | |
| while (count < size) { | |
| status = dspio_write(codec, *buffer++); | |
| if (status != 0) | |
| break; | |
| count++; | |
| } | |
| return status; | |
| } | |
| static int dspio_read(struct hda_codec *codec, unsigned int *data) | |
| { | |
| int status; | |
| status = dspio_send(codec, VENDOR_DSPIO_SCP_POST_READ_DATA, 0); | |
| if (status == -EIO) | |
| return status; | |
| status = dspio_send(codec, VENDOR_DSPIO_STATUS, 0); | |
| if (status == -EIO || | |
| status == VENDOR_STATUS_DSPIO_SCP_RESPONSE_QUEUE_EMPTY) | |
| return -EIO; | |
| *data = snd_hda_codec_read(codec, WIDGET_DSP_CTRL, 0, | |
| VENDOR_DSPIO_SCP_READ_DATA, 0); | |
| return 0; | |
| } | |
| static int dspio_read_multiple(struct hda_codec *codec, unsigned int *buffer, | |
| unsigned int *buf_size, unsigned int size_count) | |
| { | |
| int status = 0; | |
| unsigned int size = *buf_size; | |
| unsigned int count; | |
| unsigned int skip_count; | |
| unsigned int dummy; | |
| if (buffer == NULL) | |
| return -1; | |
| count = 0; | |
| while (count < size && count < size_count) { | |
| status = dspio_read(codec, buffer++); | |
| if (status != 0) | |
| break; | |
| count++; | |
| } | |
| skip_count = count; | |
| if (status == 0) { | |
| while (skip_count < size) { | |
| status = dspio_read(codec, &dummy); | |
| if (status != 0) | |
| break; | |
| skip_count++; | |
| } | |
| } | |
| *buf_size = count; | |
| return status; | |
| } | |
| /* | |
| * Construct the SCP header using corresponding fields | |
| */ | |
| static inline unsigned int | |
| make_scp_header(unsigned int target_id, unsigned int source_id, | |
| unsigned int get_flag, unsigned int req, | |
| unsigned int device_flag, unsigned int resp_flag, | |
| unsigned int error_flag, unsigned int data_size) | |
| { | |
| unsigned int header = 0; | |
| header = (data_size & 0x1f) << 27; | |
| header |= (error_flag & 0x01) << 26; | |
| header |= (resp_flag & 0x01) << 25; | |
| header |= (device_flag & 0x01) << 24; | |
| header |= (req & 0x7f) << 17; | |
| header |= (get_flag & 0x01) << 16; | |
| header |= (source_id & 0xff) << 8; | |
| header |= target_id & 0xff; | |
| return header; | |
| } | |
| /* | |
| * Extract corresponding fields from SCP header | |
| */ | |
| static inline void | |
| extract_scp_header(unsigned int header, | |
| unsigned int *target_id, unsigned int *source_id, | |
| unsigned int *get_flag, unsigned int *req, | |
| unsigned int *device_flag, unsigned int *resp_flag, | |
| unsigned int *error_flag, unsigned int *data_size) | |
| { | |
| if (data_size) | |
| *data_size = (header >> 27) & 0x1f; | |
| if (error_flag) | |
| *error_flag = (header >> 26) & 0x01; | |
| if (resp_flag) | |
| *resp_flag = (header >> 25) & 0x01; | |
| if (device_flag) | |
| *device_flag = (header >> 24) & 0x01; | |
| if (req) | |
| *req = (header >> 17) & 0x7f; | |
| if (get_flag) | |
| *get_flag = (header >> 16) & 0x01; | |
| if (source_id) | |
| *source_id = (header >> 8) & 0xff; | |
| if (target_id) | |
| *target_id = header & 0xff; | |
| } | |
| #define SCP_MAX_DATA_WORDS (16) | |
| /* Structure to contain any SCP message */ | |
| struct scp_msg { | |
| unsigned int hdr; | |
| unsigned int data[SCP_MAX_DATA_WORDS]; | |
| }; | |
| static void dspio_clear_response_queue(struct hda_codec *codec) | |
| { | |
| unsigned long timeout = jiffies + msecs_to_jiffies(1000); | |
| unsigned int dummy = 0; | |
| int status; | |
| /* clear all from the response queue */ | |
| do { | |
| status = dspio_read(codec, &dummy); | |
| } while (status == 0 && time_before(jiffies, timeout)); | |
| } | |
| static int dspio_get_response_data(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int data = 0; | |
| unsigned int count; | |
| if (dspio_read(codec, &data) < 0) | |
| return -EIO; | |
| if ((data & 0x00ffffff) == spec->wait_scp_header) { | |
| spec->scp_resp_header = data; | |
| spec->scp_resp_count = data >> 27; | |
| count = spec->wait_num_data; | |
| dspio_read_multiple(codec, spec->scp_resp_data, | |
| &spec->scp_resp_count, count); | |
| return 0; | |
| } | |
| return -EIO; | |
| } | |
| /* | |
| * Send SCP message to DSP | |
| */ | |
| static int dspio_send_scp_message(struct hda_codec *codec, | |
| unsigned char *send_buf, | |
| unsigned int send_buf_size, | |
| unsigned char *return_buf, | |
| unsigned int return_buf_size, | |
| unsigned int *bytes_returned) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int status; | |
| unsigned int scp_send_size = 0; | |
| unsigned int total_size; | |
| bool waiting_for_resp = false; | |
| unsigned int header; | |
| struct scp_msg *ret_msg; | |
| unsigned int resp_src_id, resp_target_id; | |
| unsigned int data_size, src_id, target_id, get_flag, device_flag; | |
| if (bytes_returned) | |
| *bytes_returned = 0; | |
| /* get scp header from buffer */ | |
| header = *((unsigned int *)send_buf); | |
| extract_scp_header(header, &target_id, &src_id, &get_flag, NULL, | |
| &device_flag, NULL, NULL, &data_size); | |
| scp_send_size = data_size + 1; | |
| total_size = (scp_send_size * 4); | |
| if (send_buf_size < total_size) | |
| return -EINVAL; | |
| if (get_flag || device_flag) { | |
| if (!return_buf || return_buf_size < 4 || !bytes_returned) | |
| return -EINVAL; | |
| spec->wait_scp_header = *((unsigned int *)send_buf); | |
| /* swap source id with target id */ | |
| resp_target_id = src_id; | |
| resp_src_id = target_id; | |
| spec->wait_scp_header &= 0xffff0000; | |
| spec->wait_scp_header |= (resp_src_id << 8) | (resp_target_id); | |
| spec->wait_num_data = return_buf_size/sizeof(unsigned int) - 1; | |
| spec->wait_scp = 1; | |
| waiting_for_resp = true; | |
| } | |
| status = dspio_write_multiple(codec, (unsigned int *)send_buf, | |
| scp_send_size); | |
| if (status < 0) { | |
| spec->wait_scp = 0; | |
| return status; | |
| } | |
| if (waiting_for_resp) { | |
| unsigned long timeout = jiffies + msecs_to_jiffies(1000); | |
| memset(return_buf, 0, return_buf_size); | |
| do { | |
| msleep(20); | |
| } while (spec->wait_scp && time_before(jiffies, timeout)); | |
| waiting_for_resp = false; | |
| if (!spec->wait_scp) { | |
| ret_msg = (struct scp_msg *)return_buf; | |
| memcpy(&ret_msg->hdr, &spec->scp_resp_header, 4); | |
| memcpy(&ret_msg->data, spec->scp_resp_data, | |
| spec->wait_num_data); | |
| *bytes_returned = (spec->scp_resp_count + 1) * 4; | |
| status = 0; | |
| } else { | |
| status = -EIO; | |
| } | |
| spec->wait_scp = 0; | |
| } | |
| return status; | |
| } | |
| /** | |
| * dspio_scp - Prepare and send the SCP message to DSP | |
| * @codec: the HDA codec | |
| * @mod_id: ID of the DSP module to send the command | |
| * @src_id: ID of the source | |
| * @req: ID of request to send to the DSP module | |
| * @dir: SET or GET | |
| * @data: pointer to the data to send with the request, request specific | |
| * @len: length of the data, in bytes | |
| * @reply: point to the buffer to hold data returned for a reply | |
| * @reply_len: length of the reply buffer returned from GET | |
| * | |
| * Returns zero or a negative error code. | |
| */ | |
| static int dspio_scp(struct hda_codec *codec, | |
| int mod_id, int src_id, int req, int dir, const void *data, | |
| unsigned int len, void *reply, unsigned int *reply_len) | |
| { | |
| int status = 0; | |
| struct scp_msg scp_send, scp_reply; | |
| unsigned int ret_bytes, send_size, ret_size; | |
| unsigned int send_get_flag, reply_resp_flag, reply_error_flag; | |
| unsigned int reply_data_size; | |
| memset(&scp_send, 0, sizeof(scp_send)); | |
| memset(&scp_reply, 0, sizeof(scp_reply)); | |
| if ((len != 0 && data == NULL) || (len > SCP_MAX_DATA_WORDS)) | |
| return -EINVAL; | |
| if (dir == SCP_GET && reply == NULL) { | |
| codec_dbg(codec, "dspio_scp get but has no buffer\n"); | |
| return -EINVAL; | |
| } | |
| if (reply != NULL && (reply_len == NULL || (*reply_len == 0))) { | |
| codec_dbg(codec, "dspio_scp bad resp buf len parms\n"); | |
| return -EINVAL; | |
| } | |
| scp_send.hdr = make_scp_header(mod_id, src_id, (dir == SCP_GET), req, | |
| 0, 0, 0, len/sizeof(unsigned int)); | |
| if (data != NULL && len > 0) { | |
| len = min((unsigned int)(sizeof(scp_send.data)), len); | |
| memcpy(scp_send.data, data, len); | |
| } | |
| ret_bytes = 0; | |
| send_size = sizeof(unsigned int) + len; | |
| status = dspio_send_scp_message(codec, (unsigned char *)&scp_send, | |
| send_size, (unsigned char *)&scp_reply, | |
| sizeof(scp_reply), &ret_bytes); | |
| if (status < 0) { | |
| codec_dbg(codec, "dspio_scp: send scp msg failed\n"); | |
| return status; | |
| } | |
| /* extract send and reply headers members */ | |
| extract_scp_header(scp_send.hdr, NULL, NULL, &send_get_flag, | |
| NULL, NULL, NULL, NULL, NULL); | |
| extract_scp_header(scp_reply.hdr, NULL, NULL, NULL, NULL, NULL, | |
| &reply_resp_flag, &reply_error_flag, | |
| &reply_data_size); | |
| if (!send_get_flag) | |
| return 0; | |
| if (reply_resp_flag && !reply_error_flag) { | |
| ret_size = (ret_bytes - sizeof(scp_reply.hdr)) | |
| / sizeof(unsigned int); | |
| if (*reply_len < ret_size*sizeof(unsigned int)) { | |
| codec_dbg(codec, "reply too long for buf\n"); | |
| return -EINVAL; | |
| } else if (ret_size != reply_data_size) { | |
| codec_dbg(codec, "RetLen and HdrLen .NE.\n"); | |
| return -EINVAL; | |
| } else if (!reply) { | |
| codec_dbg(codec, "NULL reply\n"); | |
| return -EINVAL; | |
| } else { | |
| *reply_len = ret_size*sizeof(unsigned int); | |
| memcpy(reply, scp_reply.data, *reply_len); | |
| } | |
| } else { | |
| codec_dbg(codec, "reply ill-formed or errflag set\n"); | |
| return -EIO; | |
| } | |
| return status; | |
| } | |
| /* | |
| * Set DSP parameters | |
| */ | |
| static int dspio_set_param(struct hda_codec *codec, int mod_id, | |
| int src_id, int req, const void *data, unsigned int len) | |
| { | |
| return dspio_scp(codec, mod_id, src_id, req, SCP_SET, data, len, NULL, | |
| NULL); | |
| } | |
| static int dspio_set_uint_param(struct hda_codec *codec, int mod_id, | |
| int req, const unsigned int data) | |
| { | |
| return dspio_set_param(codec, mod_id, 0x20, req, &data, | |
| sizeof(unsigned int)); | |
| } | |
| /* | |
| * Allocate a DSP DMA channel via an SCP message | |
| */ | |
| static int dspio_alloc_dma_chan(struct hda_codec *codec, unsigned int *dma_chan) | |
| { | |
| int status = 0; | |
| unsigned int size = sizeof(*dma_chan); | |
| codec_dbg(codec, " dspio_alloc_dma_chan() -- begin\n"); | |
| status = dspio_scp(codec, MASTERCONTROL, 0x20, | |
| MASTERCONTROL_ALLOC_DMA_CHAN, SCP_GET, NULL, 0, | |
| dma_chan, &size); | |
| if (status < 0) { | |
| codec_dbg(codec, "dspio_alloc_dma_chan: SCP Failed\n"); | |
| return status; | |
| } | |
| if ((*dma_chan + 1) == 0) { | |
| codec_dbg(codec, "no free dma channels to allocate\n"); | |
| return -EBUSY; | |
| } | |
| codec_dbg(codec, "dspio_alloc_dma_chan: chan=%d\n", *dma_chan); | |
| codec_dbg(codec, " dspio_alloc_dma_chan() -- complete\n"); | |
| return status; | |
| } | |
| /* | |
| * Free a DSP DMA via an SCP message | |
| */ | |
| static int dspio_free_dma_chan(struct hda_codec *codec, unsigned int dma_chan) | |
| { | |
| int status = 0; | |
| unsigned int dummy = 0; | |
| codec_dbg(codec, " dspio_free_dma_chan() -- begin\n"); | |
| codec_dbg(codec, "dspio_free_dma_chan: chan=%d\n", dma_chan); | |
| status = dspio_scp(codec, MASTERCONTROL, 0x20, | |
| MASTERCONTROL_ALLOC_DMA_CHAN, SCP_SET, &dma_chan, | |
| sizeof(dma_chan), NULL, &dummy); | |
| if (status < 0) { | |
| codec_dbg(codec, "dspio_free_dma_chan: SCP Failed\n"); | |
| return status; | |
| } | |
| codec_dbg(codec, " dspio_free_dma_chan() -- complete\n"); | |
| return status; | |
| } | |
| /* | |
| * (Re)start the DSP | |
| */ | |
| static int dsp_set_run_state(struct hda_codec *codec) | |
| { | |
| unsigned int dbg_ctrl_reg; | |
| unsigned int halt_state; | |
| int err; | |
| err = chipio_read(codec, DSP_DBGCNTL_INST_OFFSET, &dbg_ctrl_reg); | |
| if (err < 0) | |
| return err; | |
| halt_state = (dbg_ctrl_reg & DSP_DBGCNTL_STATE_MASK) >> | |
| DSP_DBGCNTL_STATE_LOBIT; | |
| if (halt_state != 0) { | |
| dbg_ctrl_reg &= ~((halt_state << DSP_DBGCNTL_SS_LOBIT) & | |
| DSP_DBGCNTL_SS_MASK); | |
| err = chipio_write(codec, DSP_DBGCNTL_INST_OFFSET, | |
| dbg_ctrl_reg); | |
| if (err < 0) | |
| return err; | |
| dbg_ctrl_reg |= (halt_state << DSP_DBGCNTL_EXEC_LOBIT) & | |
| DSP_DBGCNTL_EXEC_MASK; | |
| err = chipio_write(codec, DSP_DBGCNTL_INST_OFFSET, | |
| dbg_ctrl_reg); | |
| if (err < 0) | |
| return err; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Reset the DSP | |
| */ | |
| static int dsp_reset(struct hda_codec *codec) | |
| { | |
| unsigned int res; | |
| int retry = 20; | |
| codec_dbg(codec, "dsp_reset\n"); | |
| do { | |
| res = dspio_send(codec, VENDOR_DSPIO_DSP_INIT, 0); | |
| retry--; | |
| } while (res == -EIO && retry); | |
| if (!retry) { | |
| codec_dbg(codec, "dsp_reset timeout\n"); | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Convert chip address to DSP address | |
| */ | |
| static unsigned int dsp_chip_to_dsp_addx(unsigned int chip_addx, | |
| bool *code, bool *yram) | |
| { | |
| *code = *yram = false; | |
| if (UC_RANGE(chip_addx, 1)) { | |
| *code = true; | |
| return UC_OFF(chip_addx); | |
| } else if (X_RANGE_ALL(chip_addx, 1)) { | |
| return X_OFF(chip_addx); | |
| } else if (Y_RANGE_ALL(chip_addx, 1)) { | |
| *yram = true; | |
| return Y_OFF(chip_addx); | |
| } | |
| return INVALID_CHIP_ADDRESS; | |
| } | |
| /* | |
| * Check if the DSP DMA is active | |
| */ | |
| static bool dsp_is_dma_active(struct hda_codec *codec, unsigned int dma_chan) | |
| { | |
| unsigned int dma_chnlstart_reg; | |
| chipio_read(codec, DSPDMAC_CHNLSTART_INST_OFFSET, &dma_chnlstart_reg); | |
| return ((dma_chnlstart_reg & (1 << | |
| (DSPDMAC_CHNLSTART_EN_LOBIT + dma_chan))) != 0); | |
| } | |
| static int dsp_dma_setup_common(struct hda_codec *codec, | |
| unsigned int chip_addx, | |
| unsigned int dma_chan, | |
| unsigned int port_map_mask, | |
| bool ovly) | |
| { | |
| int status = 0; | |
| unsigned int chnl_prop; | |
| unsigned int dsp_addx; | |
| unsigned int active; | |
| bool code, yram; | |
| codec_dbg(codec, "-- dsp_dma_setup_common() -- Begin ---------\n"); | |
| if (dma_chan >= DSPDMAC_DMA_CFG_CHANNEL_COUNT) { | |
| codec_dbg(codec, "dma chan num invalid\n"); | |
| return -EINVAL; | |
| } | |
| if (dsp_is_dma_active(codec, dma_chan)) { | |
| codec_dbg(codec, "dma already active\n"); | |
| return -EBUSY; | |
| } | |
| dsp_addx = dsp_chip_to_dsp_addx(chip_addx, &code, &yram); | |
| if (dsp_addx == INVALID_CHIP_ADDRESS) { | |
| codec_dbg(codec, "invalid chip addr\n"); | |
| return -ENXIO; | |
| } | |
| chnl_prop = DSPDMAC_CHNLPROP_AC_MASK; | |
| active = 0; | |
| codec_dbg(codec, " dsp_dma_setup_common() start reg pgm\n"); | |
| if (ovly) { | |
| status = chipio_read(codec, DSPDMAC_CHNLPROP_INST_OFFSET, | |
| &chnl_prop); | |
| if (status < 0) { | |
| codec_dbg(codec, "read CHNLPROP Reg fail\n"); | |
| return status; | |
| } | |
| codec_dbg(codec, "dsp_dma_setup_common() Read CHNLPROP\n"); | |
| } | |
| if (!code) | |
| chnl_prop &= ~(1 << (DSPDMAC_CHNLPROP_MSPCE_LOBIT + dma_chan)); | |
| else | |
| chnl_prop |= (1 << (DSPDMAC_CHNLPROP_MSPCE_LOBIT + dma_chan)); | |
| chnl_prop &= ~(1 << (DSPDMAC_CHNLPROP_DCON_LOBIT + dma_chan)); | |
| status = chipio_write(codec, DSPDMAC_CHNLPROP_INST_OFFSET, chnl_prop); | |
| if (status < 0) { | |
| codec_dbg(codec, "write CHNLPROP Reg fail\n"); | |
| return status; | |
| } | |
| codec_dbg(codec, " dsp_dma_setup_common() Write CHNLPROP\n"); | |
| if (ovly) { | |
| status = chipio_read(codec, DSPDMAC_ACTIVE_INST_OFFSET, | |
| &active); | |
| if (status < 0) { | |
| codec_dbg(codec, "read ACTIVE Reg fail\n"); | |
| return status; | |
| } | |
| codec_dbg(codec, "dsp_dma_setup_common() Read ACTIVE\n"); | |
| } | |
| active &= (~(1 << (DSPDMAC_ACTIVE_AAR_LOBIT + dma_chan))) & | |
| DSPDMAC_ACTIVE_AAR_MASK; | |
| status = chipio_write(codec, DSPDMAC_ACTIVE_INST_OFFSET, active); | |
| if (status < 0) { | |
| codec_dbg(codec, "write ACTIVE Reg fail\n"); | |
| return status; | |
| } | |
| codec_dbg(codec, " dsp_dma_setup_common() Write ACTIVE\n"); | |
| status = chipio_write(codec, DSPDMAC_AUDCHSEL_INST_OFFSET(dma_chan), | |
| port_map_mask); | |
| if (status < 0) { | |
| codec_dbg(codec, "write AUDCHSEL Reg fail\n"); | |
| return status; | |
| } | |
| codec_dbg(codec, " dsp_dma_setup_common() Write AUDCHSEL\n"); | |
| status = chipio_write(codec, DSPDMAC_IRQCNT_INST_OFFSET(dma_chan), | |
| DSPDMAC_IRQCNT_BICNT_MASK | DSPDMAC_IRQCNT_CICNT_MASK); | |
| if (status < 0) { | |
| codec_dbg(codec, "write IRQCNT Reg fail\n"); | |
| return status; | |
| } | |
| codec_dbg(codec, " dsp_dma_setup_common() Write IRQCNT\n"); | |
| codec_dbg(codec, | |
| "ChipA=0x%x,DspA=0x%x,dmaCh=%u, " | |
| "CHSEL=0x%x,CHPROP=0x%x,Active=0x%x\n", | |
| chip_addx, dsp_addx, dma_chan, | |
| port_map_mask, chnl_prop, active); | |
| codec_dbg(codec, "-- dsp_dma_setup_common() -- Complete ------\n"); | |
| return 0; | |
| } | |
| /* | |
| * Setup the DSP DMA per-transfer-specific registers | |
| */ | |
| static int dsp_dma_setup(struct hda_codec *codec, | |
| unsigned int chip_addx, | |
| unsigned int count, | |
| unsigned int dma_chan) | |
| { | |
| int status = 0; | |
| bool code, yram; | |
| unsigned int dsp_addx; | |
| unsigned int addr_field; | |
| unsigned int incr_field; | |
| unsigned int base_cnt; | |
| unsigned int cur_cnt; | |
| unsigned int dma_cfg = 0; | |
| unsigned int adr_ofs = 0; | |
| unsigned int xfr_cnt = 0; | |
| const unsigned int max_dma_count = 1 << (DSPDMAC_XFRCNT_BCNT_HIBIT - | |
| DSPDMAC_XFRCNT_BCNT_LOBIT + 1); | |
| codec_dbg(codec, "-- dsp_dma_setup() -- Begin ---------\n"); | |
| if (count > max_dma_count) { | |
| codec_dbg(codec, "count too big\n"); | |
| return -EINVAL; | |
| } | |
| dsp_addx = dsp_chip_to_dsp_addx(chip_addx, &code, &yram); | |
| if (dsp_addx == INVALID_CHIP_ADDRESS) { | |
| codec_dbg(codec, "invalid chip addr\n"); | |
| return -ENXIO; | |
| } | |
| codec_dbg(codec, " dsp_dma_setup() start reg pgm\n"); | |
| addr_field = dsp_addx << DSPDMAC_DMACFG_DBADR_LOBIT; | |
| incr_field = 0; | |
| if (!code) { | |
| addr_field <<= 1; | |
| if (yram) | |
| addr_field |= (1 << DSPDMAC_DMACFG_DBADR_LOBIT); | |
| incr_field = (1 << DSPDMAC_DMACFG_AINCR_LOBIT); | |
| } | |
| dma_cfg = addr_field + incr_field; | |
| status = chipio_write(codec, DSPDMAC_DMACFG_INST_OFFSET(dma_chan), | |
| dma_cfg); | |
| if (status < 0) { | |
| codec_dbg(codec, "write DMACFG Reg fail\n"); | |
| return status; | |
| } | |
| codec_dbg(codec, " dsp_dma_setup() Write DMACFG\n"); | |
| adr_ofs = (count - 1) << (DSPDMAC_DSPADROFS_BOFS_LOBIT + | |
| (code ? 0 : 1)); | |
| status = chipio_write(codec, DSPDMAC_DSPADROFS_INST_OFFSET(dma_chan), | |
| adr_ofs); | |
| if (status < 0) { | |
| codec_dbg(codec, "write DSPADROFS Reg fail\n"); | |
| return status; | |
| } | |
| codec_dbg(codec, " dsp_dma_setup() Write DSPADROFS\n"); | |
| base_cnt = (count - 1) << DSPDMAC_XFRCNT_BCNT_LOBIT; | |
| cur_cnt = (count - 1) << DSPDMAC_XFRCNT_CCNT_LOBIT; | |
| xfr_cnt = base_cnt | cur_cnt; | |
| status = chipio_write(codec, | |
| DSPDMAC_XFRCNT_INST_OFFSET(dma_chan), xfr_cnt); | |
| if (status < 0) { | |
| codec_dbg(codec, "write XFRCNT Reg fail\n"); | |
| return status; | |
| } | |
| codec_dbg(codec, " dsp_dma_setup() Write XFRCNT\n"); | |
| codec_dbg(codec, | |
| "ChipA=0x%x, cnt=0x%x, DMACFG=0x%x, " | |
| "ADROFS=0x%x, XFRCNT=0x%x\n", | |
| chip_addx, count, dma_cfg, adr_ofs, xfr_cnt); | |
| codec_dbg(codec, "-- dsp_dma_setup() -- Complete ---------\n"); | |
| return 0; | |
| } | |
| /* | |
| * Start the DSP DMA | |
| */ | |
| static int dsp_dma_start(struct hda_codec *codec, | |
| unsigned int dma_chan, bool ovly) | |
| { | |
| unsigned int reg = 0; | |
| int status = 0; | |
| codec_dbg(codec, "-- dsp_dma_start() -- Begin ---------\n"); | |
| if (ovly) { | |
| status = chipio_read(codec, | |
| DSPDMAC_CHNLSTART_INST_OFFSET, ®); | |
| if (status < 0) { | |
| codec_dbg(codec, "read CHNLSTART reg fail\n"); | |
| return status; | |
| } | |
| codec_dbg(codec, "-- dsp_dma_start() Read CHNLSTART\n"); | |
| reg &= ~(DSPDMAC_CHNLSTART_EN_MASK | | |
| DSPDMAC_CHNLSTART_DIS_MASK); | |
| } | |
| status = chipio_write(codec, DSPDMAC_CHNLSTART_INST_OFFSET, | |
| reg | (1 << (dma_chan + DSPDMAC_CHNLSTART_EN_LOBIT))); | |
| if (status < 0) { | |
| codec_dbg(codec, "write CHNLSTART reg fail\n"); | |
| return status; | |
| } | |
| codec_dbg(codec, "-- dsp_dma_start() -- Complete ---------\n"); | |
| return status; | |
| } | |
| /* | |
| * Stop the DSP DMA | |
| */ | |
| static int dsp_dma_stop(struct hda_codec *codec, | |
| unsigned int dma_chan, bool ovly) | |
| { | |
| unsigned int reg = 0; | |
| int status = 0; | |
| codec_dbg(codec, "-- dsp_dma_stop() -- Begin ---------\n"); | |
| if (ovly) { | |
| status = chipio_read(codec, | |
| DSPDMAC_CHNLSTART_INST_OFFSET, ®); | |
| if (status < 0) { | |
| codec_dbg(codec, "read CHNLSTART reg fail\n"); | |
| return status; | |
| } | |
| codec_dbg(codec, "-- dsp_dma_stop() Read CHNLSTART\n"); | |
| reg &= ~(DSPDMAC_CHNLSTART_EN_MASK | | |
| DSPDMAC_CHNLSTART_DIS_MASK); | |
| } | |
| status = chipio_write(codec, DSPDMAC_CHNLSTART_INST_OFFSET, | |
| reg | (1 << (dma_chan + DSPDMAC_CHNLSTART_DIS_LOBIT))); | |
| if (status < 0) { | |
| codec_dbg(codec, "write CHNLSTART reg fail\n"); | |
| return status; | |
| } | |
| codec_dbg(codec, "-- dsp_dma_stop() -- Complete ---------\n"); | |
| return status; | |
| } | |
| /** | |
| * dsp_allocate_router_ports - Allocate router ports | |
| * | |
| * @codec: the HDA codec | |
| * @num_chans: number of channels in the stream | |
| * @ports_per_channel: number of ports per channel | |
| * @start_device: start device | |
| * @port_map: pointer to the port list to hold the allocated ports | |
| * | |
| * Returns zero or a negative error code. | |
| */ | |
| static int dsp_allocate_router_ports(struct hda_codec *codec, | |
| unsigned int num_chans, | |
| unsigned int ports_per_channel, | |
| unsigned int start_device, | |
| unsigned int *port_map) | |
| { | |
| int status = 0; | |
| int res; | |
| u8 val; | |
| status = chipio_send(codec, VENDOR_CHIPIO_STATUS, 0); | |
| if (status < 0) | |
| return status; | |
| val = start_device << 6; | |
| val |= (ports_per_channel - 1) << 4; | |
| val |= num_chans - 1; | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_PORT_ALLOC_CONFIG_SET, | |
| val); | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_PORT_ALLOC_SET, | |
| MEM_CONNID_DSP); | |
| status = chipio_send(codec, VENDOR_CHIPIO_STATUS, 0); | |
| if (status < 0) | |
| return status; | |
| res = snd_hda_codec_read(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_PORT_ALLOC_GET, 0); | |
| *port_map = res; | |
| return (res < 0) ? res : 0; | |
| } | |
| /* | |
| * Free router ports | |
| */ | |
| static int dsp_free_router_ports(struct hda_codec *codec) | |
| { | |
| int status = 0; | |
| status = chipio_send(codec, VENDOR_CHIPIO_STATUS, 0); | |
| if (status < 0) | |
| return status; | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_PORT_FREE_SET, | |
| MEM_CONNID_DSP); | |
| status = chipio_send(codec, VENDOR_CHIPIO_STATUS, 0); | |
| return status; | |
| } | |
| /* | |
| * Allocate DSP ports for the download stream | |
| */ | |
| static int dsp_allocate_ports(struct hda_codec *codec, | |
| unsigned int num_chans, | |
| unsigned int rate_multi, unsigned int *port_map) | |
| { | |
| int status; | |
| codec_dbg(codec, " dsp_allocate_ports() -- begin\n"); | |
| if ((rate_multi != 1) && (rate_multi != 2) && (rate_multi != 4)) { | |
| codec_dbg(codec, "bad rate multiple\n"); | |
| return -EINVAL; | |
| } | |
| status = dsp_allocate_router_ports(codec, num_chans, | |
| rate_multi, 0, port_map); | |
| codec_dbg(codec, " dsp_allocate_ports() -- complete\n"); | |
| return status; | |
| } | |
| static int dsp_allocate_ports_format(struct hda_codec *codec, | |
| const unsigned short fmt, | |
| unsigned int *port_map) | |
| { | |
| unsigned int num_chans; | |
| unsigned int sample_rate_div = ((get_hdafmt_rate(fmt) >> 0) & 3) + 1; | |
| unsigned int sample_rate_mul = ((get_hdafmt_rate(fmt) >> 3) & 3) + 1; | |
| unsigned int rate_multi = sample_rate_mul / sample_rate_div; | |
| if ((rate_multi != 1) && (rate_multi != 2) && (rate_multi != 4)) { | |
| codec_dbg(codec, "bad rate multiple\n"); | |
| return -EINVAL; | |
| } | |
| num_chans = get_hdafmt_chs(fmt) + 1; | |
| return dsp_allocate_ports(codec, num_chans, rate_multi, port_map); | |
| } | |
| /* | |
| * free DSP ports | |
| */ | |
| static int dsp_free_ports(struct hda_codec *codec) | |
| { | |
| int status; | |
| codec_dbg(codec, " dsp_free_ports() -- begin\n"); | |
| status = dsp_free_router_ports(codec); | |
| if (status < 0) { | |
| codec_dbg(codec, "free router ports fail\n"); | |
| return status; | |
| } | |
| codec_dbg(codec, " dsp_free_ports() -- complete\n"); | |
| return status; | |
| } | |
| /* | |
| * HDA DMA engine stuffs for DSP code download | |
| */ | |
| struct dma_engine { | |
| struct hda_codec *codec; | |
| unsigned short m_converter_format; | |
| struct snd_dma_buffer *dmab; | |
| unsigned int buf_size; | |
| }; | |
| enum dma_state { | |
| DMA_STATE_STOP = 0, | |
| DMA_STATE_RUN = 1 | |
| }; | |
| static int dma_convert_to_hda_format(struct hda_codec *codec, | |
| unsigned int sample_rate, | |
| unsigned short channels, | |
| unsigned short *hda_format) | |
| { | |
| unsigned int format_val; | |
| format_val = snd_hdac_stream_format(channels, 32, sample_rate); | |
| if (hda_format) | |
| *hda_format = (unsigned short)format_val; | |
| return 0; | |
| } | |
| /* | |
| * Reset DMA for DSP download | |
| */ | |
| static int dma_reset(struct dma_engine *dma) | |
| { | |
| struct hda_codec *codec = dma->codec; | |
| struct ca0132_spec *spec = codec->spec; | |
| int status; | |
| if (dma->dmab->area) | |
| snd_hda_codec_load_dsp_cleanup(codec, dma->dmab); | |
| status = snd_hda_codec_load_dsp_prepare(codec, | |
| dma->m_converter_format, | |
| dma->buf_size, | |
| dma->dmab); | |
| if (status < 0) | |
| return status; | |
| spec->dsp_stream_id = status; | |
| return 0; | |
| } | |
| static int dma_set_state(struct dma_engine *dma, enum dma_state state) | |
| { | |
| bool cmd; | |
| switch (state) { | |
| case DMA_STATE_STOP: | |
| cmd = false; | |
| break; | |
| case DMA_STATE_RUN: | |
| cmd = true; | |
| break; | |
| default: | |
| return 0; | |
| } | |
| snd_hda_codec_load_dsp_trigger(dma->codec, cmd); | |
| return 0; | |
| } | |
| static unsigned int dma_get_buffer_size(struct dma_engine *dma) | |
| { | |
| return dma->dmab->bytes; | |
| } | |
| static unsigned char *dma_get_buffer_addr(struct dma_engine *dma) | |
| { | |
| return dma->dmab->area; | |
| } | |
| static int dma_xfer(struct dma_engine *dma, | |
| const unsigned int *data, | |
| unsigned int count) | |
| { | |
| memcpy(dma->dmab->area, data, count); | |
| return 0; | |
| } | |
| static void dma_get_converter_format( | |
| struct dma_engine *dma, | |
| unsigned short *format) | |
| { | |
| if (format) | |
| *format = dma->m_converter_format; | |
| } | |
| static unsigned int dma_get_stream_id(struct dma_engine *dma) | |
| { | |
| struct ca0132_spec *spec = dma->codec->spec; | |
| return spec->dsp_stream_id; | |
| } | |
| struct dsp_image_seg { | |
| u32 magic; | |
| u32 chip_addr; | |
| u32 count; | |
| u32 data[]; | |
| }; | |
| static const u32 g_magic_value = 0x4c46584d; | |
| static const u32 g_chip_addr_magic_value = 0xFFFFFF01; | |
| static bool is_valid(const struct dsp_image_seg *p) | |
| { | |
| return p->magic == g_magic_value; | |
| } | |
| static bool is_hci_prog_list_seg(const struct dsp_image_seg *p) | |
| { | |
| return g_chip_addr_magic_value == p->chip_addr; | |
| } | |
| static bool is_last(const struct dsp_image_seg *p) | |
| { | |
| return p->count == 0; | |
| } | |
| static size_t dsp_sizeof(const struct dsp_image_seg *p) | |
| { | |
| return struct_size(p, data, p->count); | |
| } | |
| static const struct dsp_image_seg *get_next_seg_ptr( | |
| const struct dsp_image_seg *p) | |
| { | |
| return (struct dsp_image_seg *)((unsigned char *)(p) + dsp_sizeof(p)); | |
| } | |
| /* | |
| * CA0132 chip DSP transfer stuffs. For DSP download. | |
| */ | |
| #define INVALID_DMA_CHANNEL (~0U) | |
| /* | |
| * Program a list of address/data pairs via the ChipIO widget. | |
| * The segment data is in the format of successive pairs of words. | |
| * These are repeated as indicated by the segment's count field. | |
| */ | |
| static int dspxfr_hci_write(struct hda_codec *codec, | |
| const struct dsp_image_seg *fls) | |
| { | |
| int status; | |
| const u32 *data; | |
| unsigned int count; | |
| if (fls == NULL || fls->chip_addr != g_chip_addr_magic_value) { | |
| codec_dbg(codec, "hci_write invalid params\n"); | |
| return -EINVAL; | |
| } | |
| count = fls->count; | |
| data = (u32 *)(fls->data); | |
| while (count >= 2) { | |
| status = chipio_write(codec, data[0], data[1]); | |
| if (status < 0) { | |
| codec_dbg(codec, "hci_write chipio failed\n"); | |
| return status; | |
| } | |
| count -= 2; | |
| data += 2; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * dspxfr_one_seg - Write a block of data into DSP code or data RAM using pre-allocated DMA engine. | |
| * | |
| * @codec: the HDA codec | |
| * @fls: pointer to a fast load image | |
| * @reloc: Relocation address for loading single-segment overlays, or 0 for | |
| * no relocation | |
| * @dma_engine: pointer to DMA engine to be used for DSP download | |
| * @dma_chan: The number of DMA channels used for DSP download | |
| * @port_map_mask: port mapping | |
| * @ovly: TRUE if overlay format is required | |
| * | |
| * Returns zero or a negative error code. | |
| */ | |
| static int dspxfr_one_seg(struct hda_codec *codec, | |
| const struct dsp_image_seg *fls, | |
| unsigned int reloc, | |
| struct dma_engine *dma_engine, | |
| unsigned int dma_chan, | |
| unsigned int port_map_mask, | |
| bool ovly) | |
| { | |
| int status = 0; | |
| bool comm_dma_setup_done = false; | |
| const unsigned int *data; | |
| unsigned int chip_addx; | |
| unsigned int words_to_write; | |
| unsigned int buffer_size_words; | |
| unsigned char *buffer_addx; | |
| unsigned short hda_format; | |
| unsigned int sample_rate_div; | |
| unsigned int sample_rate_mul; | |
| unsigned int num_chans; | |
| unsigned int hda_frame_size_words; | |
| unsigned int remainder_words; | |
| const u32 *data_remainder; | |
| u32 chip_addx_remainder; | |
| unsigned int run_size_words; | |
| const struct dsp_image_seg *hci_write = NULL; | |
| unsigned long timeout; | |
| bool dma_active; | |
| if (fls == NULL) | |
| return -EINVAL; | |
| if (is_hci_prog_list_seg(fls)) { | |
| hci_write = fls; | |
| fls = get_next_seg_ptr(fls); | |
| } | |
| if (hci_write && (!fls || is_last(fls))) { | |
| codec_dbg(codec, "hci_write\n"); | |
| return dspxfr_hci_write(codec, hci_write); | |
| } | |
| if (fls == NULL || dma_engine == NULL || port_map_mask == 0) { | |
| codec_dbg(codec, "Invalid Params\n"); | |
| return -EINVAL; | |
| } | |
| data = fls->data; | |
| chip_addx = fls->chip_addr; | |
| words_to_write = fls->count; | |
| if (!words_to_write) | |
| return hci_write ? dspxfr_hci_write(codec, hci_write) : 0; | |
| if (reloc) | |
| chip_addx = (chip_addx & (0xFFFF0000 << 2)) + (reloc << 2); | |
| if (!UC_RANGE(chip_addx, words_to_write) && | |
| !X_RANGE_ALL(chip_addx, words_to_write) && | |
| !Y_RANGE_ALL(chip_addx, words_to_write)) { | |
| codec_dbg(codec, "Invalid chip_addx Params\n"); | |
| return -EINVAL; | |
| } | |
| buffer_size_words = (unsigned int)dma_get_buffer_size(dma_engine) / | |
| sizeof(u32); | |
| buffer_addx = dma_get_buffer_addr(dma_engine); | |
| if (buffer_addx == NULL) { | |
| codec_dbg(codec, "dma_engine buffer NULL\n"); | |
| return -EINVAL; | |
| } | |
| dma_get_converter_format(dma_engine, &hda_format); | |
| sample_rate_div = ((get_hdafmt_rate(hda_format) >> 0) & 3) + 1; | |
| sample_rate_mul = ((get_hdafmt_rate(hda_format) >> 3) & 3) + 1; | |
| num_chans = get_hdafmt_chs(hda_format) + 1; | |
| hda_frame_size_words = ((sample_rate_div == 0) ? 0 : | |
| (num_chans * sample_rate_mul / sample_rate_div)); | |
| if (hda_frame_size_words == 0) { | |
| codec_dbg(codec, "frmsz zero\n"); | |
| return -EINVAL; | |
| } | |
| buffer_size_words = min(buffer_size_words, | |
| (unsigned int)(UC_RANGE(chip_addx, 1) ? | |
| 65536 : 32768)); | |
| buffer_size_words -= buffer_size_words % hda_frame_size_words; | |
| codec_dbg(codec, | |
| "chpadr=0x%08x frmsz=%u nchan=%u " | |
| "rate_mul=%u div=%u bufsz=%u\n", | |
| chip_addx, hda_frame_size_words, num_chans, | |
| sample_rate_mul, sample_rate_div, buffer_size_words); | |
| if (buffer_size_words < hda_frame_size_words) { | |
| codec_dbg(codec, "dspxfr_one_seg:failed\n"); | |
| return -EINVAL; | |
| } | |
| remainder_words = words_to_write % hda_frame_size_words; | |
| data_remainder = data; | |
| chip_addx_remainder = chip_addx; | |
| data += remainder_words; | |
| chip_addx += remainder_words*sizeof(u32); | |
| words_to_write -= remainder_words; | |
| while (words_to_write != 0) { | |
| run_size_words = min(buffer_size_words, words_to_write); | |
| codec_dbg(codec, "dspxfr (seg loop)cnt=%u rs=%u remainder=%u\n", | |
| words_to_write, run_size_words, remainder_words); | |
| dma_xfer(dma_engine, data, run_size_words*sizeof(u32)); | |
| if (!comm_dma_setup_done) { | |
| status = dsp_dma_stop(codec, dma_chan, ovly); | |
| if (status < 0) | |
| return status; | |
| status = dsp_dma_setup_common(codec, chip_addx, | |
| dma_chan, port_map_mask, ovly); | |
| if (status < 0) | |
| return status; | |
| comm_dma_setup_done = true; | |
| } | |
| status = dsp_dma_setup(codec, chip_addx, | |
| run_size_words, dma_chan); | |
| if (status < 0) | |
| return status; | |
| status = dsp_dma_start(codec, dma_chan, ovly); | |
| if (status < 0) | |
| return status; | |
| if (!dsp_is_dma_active(codec, dma_chan)) { | |
| codec_dbg(codec, "dspxfr:DMA did not start\n"); | |
| return -EIO; | |
| } | |
| status = dma_set_state(dma_engine, DMA_STATE_RUN); | |
| if (status < 0) | |
| return status; | |
| if (remainder_words != 0) { | |
| status = chipio_write_multiple(codec, | |
| chip_addx_remainder, | |
| data_remainder, | |
| remainder_words); | |
| if (status < 0) | |
| return status; | |
| remainder_words = 0; | |
| } | |
| if (hci_write) { | |
| status = dspxfr_hci_write(codec, hci_write); | |
| if (status < 0) | |
| return status; | |
| hci_write = NULL; | |
| } | |
| timeout = jiffies + msecs_to_jiffies(2000); | |
| do { | |
| dma_active = dsp_is_dma_active(codec, dma_chan); | |
| if (!dma_active) | |
| break; | |
| msleep(20); | |
| } while (time_before(jiffies, timeout)); | |
| if (dma_active) | |
| break; | |
| codec_dbg(codec, "+++++ DMA complete\n"); | |
| dma_set_state(dma_engine, DMA_STATE_STOP); | |
| status = dma_reset(dma_engine); | |
| if (status < 0) | |
| return status; | |
| data += run_size_words; | |
| chip_addx += run_size_words*sizeof(u32); | |
| words_to_write -= run_size_words; | |
| } | |
| if (remainder_words != 0) { | |
| status = chipio_write_multiple(codec, chip_addx_remainder, | |
| data_remainder, remainder_words); | |
| } | |
| return status; | |
| } | |
| /** | |
| * dspxfr_image - Write the entire DSP image of a DSP code/data overlay to DSP memories | |
| * | |
| * @codec: the HDA codec | |
| * @fls_data: pointer to a fast load image | |
| * @reloc: Relocation address for loading single-segment overlays, or 0 for | |
| * no relocation | |
| * @sample_rate: sampling rate of the stream used for DSP download | |
| * @channels: channels of the stream used for DSP download | |
| * @ovly: TRUE if overlay format is required | |
| * | |
| * Returns zero or a negative error code. | |
| */ | |
| static int dspxfr_image(struct hda_codec *codec, | |
| const struct dsp_image_seg *fls_data, | |
| unsigned int reloc, | |
| unsigned int sample_rate, | |
| unsigned short channels, | |
| bool ovly) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int status; | |
| unsigned short hda_format = 0; | |
| unsigned int response; | |
| unsigned char stream_id = 0; | |
| struct dma_engine *dma_engine; | |
| unsigned int dma_chan; | |
| unsigned int port_map_mask; | |
| if (fls_data == NULL) | |
| return -EINVAL; | |
| dma_engine = kzalloc_obj(*dma_engine); | |
| if (!dma_engine) | |
| return -ENOMEM; | |
| dma_engine->dmab = kzalloc_obj(*dma_engine->dmab); | |
| if (!dma_engine->dmab) { | |
| kfree(dma_engine); | |
| return -ENOMEM; | |
| } | |
| dma_engine->codec = codec; | |
| dma_convert_to_hda_format(codec, sample_rate, channels, &hda_format); | |
| dma_engine->m_converter_format = hda_format; | |
| dma_engine->buf_size = (ovly ? DSP_DMA_WRITE_BUFLEN_OVLY : | |
| DSP_DMA_WRITE_BUFLEN_INIT) * 2; | |
| dma_chan = ovly ? INVALID_DMA_CHANNEL : 0; | |
| status = codec_set_converter_format(codec, WIDGET_CHIP_CTRL, | |
| hda_format, &response); | |
| if (status < 0) { | |
| codec_dbg(codec, "set converter format fail\n"); | |
| goto exit; | |
| } | |
| status = snd_hda_codec_load_dsp_prepare(codec, | |
| dma_engine->m_converter_format, | |
| dma_engine->buf_size, | |
| dma_engine->dmab); | |
| if (status < 0) | |
| goto exit; | |
| spec->dsp_stream_id = status; | |
| if (ovly) { | |
| status = dspio_alloc_dma_chan(codec, &dma_chan); | |
| if (status < 0) { | |
| codec_dbg(codec, "alloc dmachan fail\n"); | |
| dma_chan = INVALID_DMA_CHANNEL; | |
| goto exit; | |
| } | |
| } | |
| port_map_mask = 0; | |
| status = dsp_allocate_ports_format(codec, hda_format, | |
| &port_map_mask); | |
| if (status < 0) { | |
| codec_dbg(codec, "alloc ports fail\n"); | |
| goto exit; | |
| } | |
| stream_id = dma_get_stream_id(dma_engine); | |
| status = codec_set_converter_stream_channel(codec, | |
| WIDGET_CHIP_CTRL, stream_id, 0, &response); | |
| if (status < 0) { | |
| codec_dbg(codec, "set stream chan fail\n"); | |
| goto exit; | |
| } | |
| while ((fls_data != NULL) && !is_last(fls_data)) { | |
| if (!is_valid(fls_data)) { | |
| codec_dbg(codec, "FLS check fail\n"); | |
| status = -EINVAL; | |
| goto exit; | |
| } | |
| status = dspxfr_one_seg(codec, fls_data, reloc, | |
| dma_engine, dma_chan, | |
| port_map_mask, ovly); | |
| if (status < 0) | |
| break; | |
| if (is_hci_prog_list_seg(fls_data)) | |
| fls_data = get_next_seg_ptr(fls_data); | |
| if ((fls_data != NULL) && !is_last(fls_data)) | |
| fls_data = get_next_seg_ptr(fls_data); | |
| } | |
| if (port_map_mask != 0) | |
| status = dsp_free_ports(codec); | |
| if (status < 0) | |
| goto exit; | |
| status = codec_set_converter_stream_channel(codec, | |
| WIDGET_CHIP_CTRL, 0, 0, &response); | |
| exit: | |
| if (ovly && (dma_chan != INVALID_DMA_CHANNEL)) | |
| dspio_free_dma_chan(codec, dma_chan); | |
| if (dma_engine->dmab->area) | |
| snd_hda_codec_load_dsp_cleanup(codec, dma_engine->dmab); | |
| kfree(dma_engine->dmab); | |
| kfree(dma_engine); | |
| return status; | |
| } | |
| /* | |
| * CA0132 DSP download stuffs. | |
| */ | |
| static void dspload_post_setup(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| codec_dbg(codec, "---- dspload_post_setup ------\n"); | |
| if (!ca0132_use_alt_functions(spec)) { | |
| /*set DSP speaker to 2.0 configuration*/ | |
| chipio_write(codec, XRAM_XRAM_INST_OFFSET(0x18), 0x08080080); | |
| chipio_write(codec, XRAM_XRAM_INST_OFFSET(0x19), 0x3f800000); | |
| /*update write pointer*/ | |
| chipio_write(codec, XRAM_XRAM_INST_OFFSET(0x29), 0x00000002); | |
| } | |
| } | |
| /** | |
| * dspload_image - Download DSP from a DSP Image Fast Load structure. | |
| * | |
| * @codec: the HDA codec | |
| * @fls: pointer to a fast load image | |
| * @ovly: TRUE if overlay format is required | |
| * @reloc: Relocation address for loading single-segment overlays, or 0 for | |
| * no relocation | |
| * @autostart: TRUE if DSP starts after loading; ignored if ovly is TRUE | |
| * @router_chans: number of audio router channels to be allocated (0 means use | |
| * internal defaults; max is 32) | |
| * | |
| * Download DSP from a DSP Image Fast Load structure. This structure is a | |
| * linear, non-constant sized element array of structures, each of which | |
| * contain the count of the data to be loaded, the data itself, and the | |
| * corresponding starting chip address of the starting data location. | |
| * Returns zero or a negative error code. | |
| */ | |
| static int dspload_image(struct hda_codec *codec, | |
| const struct dsp_image_seg *fls, | |
| bool ovly, | |
| unsigned int reloc, | |
| bool autostart, | |
| int router_chans) | |
| { | |
| int status = 0; | |
| unsigned int sample_rate; | |
| unsigned short channels; | |
| codec_dbg(codec, "---- dspload_image begin ------\n"); | |
| if (router_chans == 0) { | |
| if (!ovly) | |
| router_chans = DMA_TRANSFER_FRAME_SIZE_NWORDS; | |
| else | |
| router_chans = DMA_OVERLAY_FRAME_SIZE_NWORDS; | |
| } | |
| sample_rate = 48000; | |
| channels = (unsigned short)router_chans; | |
| while (channels > 16) { | |
| sample_rate *= 2; | |
| channels /= 2; | |
| } | |
| do { | |
| codec_dbg(codec, "Ready to program DMA\n"); | |
| if (!ovly) | |
| status = dsp_reset(codec); | |
| if (status < 0) | |
| break; | |
| codec_dbg(codec, "dsp_reset() complete\n"); | |
| status = dspxfr_image(codec, fls, reloc, sample_rate, channels, | |
| ovly); | |
| if (status < 0) | |
| break; | |
| codec_dbg(codec, "dspxfr_image() complete\n"); | |
| if (autostart && !ovly) { | |
| dspload_post_setup(codec); | |
| status = dsp_set_run_state(codec); | |
| } | |
| codec_dbg(codec, "LOAD FINISHED\n"); | |
| } while (0); | |
| return status; | |
| } | |
| #ifdef CONFIG_SND_HDA_CODEC_CA0132_DSP | |
| static bool dspload_is_loaded(struct hda_codec *codec) | |
| { | |
| unsigned int data = 0; | |
| int status = 0; | |
| status = chipio_read(codec, 0x40004, &data); | |
| if ((status < 0) || (data != 1)) | |
| return false; | |
| return true; | |
| } | |
| #else | |
| #define dspload_is_loaded(codec) false | |
| #endif | |
| static bool dspload_wait_loaded(struct hda_codec *codec) | |
| { | |
| unsigned long timeout = jiffies + msecs_to_jiffies(2000); | |
| do { | |
| if (dspload_is_loaded(codec)) { | |
| codec_info(codec, "ca0132 DSP downloaded and running\n"); | |
| return true; | |
| } | |
| msleep(20); | |
| } while (time_before(jiffies, timeout)); | |
| codec_err(codec, "ca0132 failed to download DSP\n"); | |
| return false; | |
| } | |
| /* | |
| * ca0113 related functions. The ca0113 acts as the HDA bus for the pci-e | |
| * based cards, and has a second mmio region, region2, that's used for special | |
| * commands. | |
| */ | |
| /* | |
| * For cards with PCI-E region2 (Sound Blaster Z/ZxR, Recon3D, and AE-5) | |
| * the mmio address 0x320 is used to set GPIO pins. The format for the data | |
| * The first eight bits are just the number of the pin. So far, I've only seen | |
| * this number go to 7. | |
| * AE-5 note: The AE-5 seems to use pins 2 and 3 to somehow set the color value | |
| * of the on-card LED. It seems to use pin 2 for data, then toggles 3 to on and | |
| * then off to send that bit. | |
| */ | |
| static void ca0113_mmio_gpio_set(struct hda_codec *codec, unsigned int gpio_pin, | |
| bool enable) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned short gpio_data; | |
| gpio_data = gpio_pin & 0xF; | |
| gpio_data |= ((enable << 8) & 0x100); | |
| writew(gpio_data, spec->mem_base + 0x320); | |
| } | |
| /* | |
| * Special pci region2 commands that are only used by the AE-5. They follow | |
| * a set format, and require reads at certain points to seemingly 'clear' | |
| * the response data. My first tests didn't do these reads, and would cause | |
| * the card to get locked up until the memory was read. These commands | |
| * seem to work with three distinct values that I've taken to calling group, | |
| * target-id, and value. | |
| */ | |
| static void ca0113_mmio_command_set(struct hda_codec *codec, unsigned int group, | |
| unsigned int target, unsigned int value) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int write_val; | |
| writel(0x0000007e, spec->mem_base + 0x210); | |
| readl(spec->mem_base + 0x210); | |
| writel(0x0000005a, spec->mem_base + 0x210); | |
| readl(spec->mem_base + 0x210); | |
| readl(spec->mem_base + 0x210); | |
| writel(0x00800005, spec->mem_base + 0x20c); | |
| writel(group, spec->mem_base + 0x804); | |
| writel(0x00800005, spec->mem_base + 0x20c); | |
| write_val = (target & 0xff); | |
| write_val |= (value << 8); | |
| writel(write_val, spec->mem_base + 0x204); | |
| /* | |
| * Need delay here or else it goes too fast and works inconsistently. | |
| */ | |
| msleep(20); | |
| readl(spec->mem_base + 0x860); | |
| readl(spec->mem_base + 0x854); | |
| readl(spec->mem_base + 0x840); | |
| writel(0x00800004, spec->mem_base + 0x20c); | |
| writel(0x00000000, spec->mem_base + 0x210); | |
| readl(spec->mem_base + 0x210); | |
| readl(spec->mem_base + 0x210); | |
| } | |
| /* | |
| * This second type of command is used for setting the sound filter type. | |
| */ | |
| static void ca0113_mmio_command_set_type2(struct hda_codec *codec, | |
| unsigned int group, unsigned int target, unsigned int value) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int write_val; | |
| writel(0x0000007e, spec->mem_base + 0x210); | |
| readl(spec->mem_base + 0x210); | |
| writel(0x0000005a, spec->mem_base + 0x210); | |
| readl(spec->mem_base + 0x210); | |
| readl(spec->mem_base + 0x210); | |
| writel(0x00800003, spec->mem_base + 0x20c); | |
| writel(group, spec->mem_base + 0x804); | |
| writel(0x00800005, spec->mem_base + 0x20c); | |
| write_val = (target & 0xff); | |
| write_val |= (value << 8); | |
| writel(write_val, spec->mem_base + 0x204); | |
| msleep(20); | |
| readl(spec->mem_base + 0x860); | |
| readl(spec->mem_base + 0x854); | |
| readl(spec->mem_base + 0x840); | |
| writel(0x00800004, spec->mem_base + 0x20c); | |
| writel(0x00000000, spec->mem_base + 0x210); | |
| readl(spec->mem_base + 0x210); | |
| readl(spec->mem_base + 0x210); | |
| } | |
| /* | |
| * Setup GPIO for the other variants of Core3D. | |
| */ | |
| /* | |
| * Sets up the GPIO pins so that they are discoverable. If this isn't done, | |
| * the card shows as having no GPIO pins. | |
| */ | |
| static void ca0132_gpio_init(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| case QUIRK_AE5: | |
| case QUIRK_AE7: | |
| snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00); | |
| snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x53); | |
| snd_hda_codec_write(codec, 0x01, 0, 0x790, 0x23); | |
| break; | |
| case QUIRK_R3DI: | |
| snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00); | |
| snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x5B); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| /* Sets the GPIO for audio output. */ | |
| static void ca0132_gpio_setup(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| snd_hda_codec_set_gpio(codec, 0x07, 0x07, 0x04, 0); | |
| snd_hda_codec_write(codec, 0x01, 0, | |
| AC_VERB_SET_GPIO_DATA, 0x06); | |
| break; | |
| case QUIRK_R3DI: | |
| snd_hda_codec_set_gpio(codec, 0x1F, 0x1E, 0x0C, 0); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| /* | |
| * GPIO control functions for the Recon3D integrated. | |
| */ | |
| enum r3di_gpio_bit { | |
| /* Bit 1 - Switch between front/rear mic. 0 = rear, 1 = front */ | |
| R3DI_MIC_SELECT_BIT = 1, | |
| /* Bit 2 - Switch between headphone/line out. 0 = Headphone, 1 = Line */ | |
| R3DI_OUT_SELECT_BIT = 2, | |
| /* | |
| * I dunno what this actually does, but it stays on until the dsp | |
| * is downloaded. | |
| */ | |
| R3DI_GPIO_DSP_DOWNLOADING = 3, | |
| /* | |
| * Same as above, no clue what it does, but it comes on after the dsp | |
| * is downloaded. | |
| */ | |
| R3DI_GPIO_DSP_DOWNLOADED = 4 | |
| }; | |
| enum r3di_mic_select { | |
| /* Set GPIO bit 1 to 0 for rear mic */ | |
| R3DI_REAR_MIC = 0, | |
| /* Set GPIO bit 1 to 1 for front microphone*/ | |
| R3DI_FRONT_MIC = 1 | |
| }; | |
| enum r3di_out_select { | |
| /* Set GPIO bit 2 to 0 for headphone */ | |
| R3DI_HEADPHONE_OUT = 0, | |
| /* Set GPIO bit 2 to 1 for speaker */ | |
| R3DI_LINE_OUT = 1 | |
| }; | |
| enum r3di_dsp_status { | |
| /* Set GPIO bit 3 to 1 until DSP is downloaded */ | |
| R3DI_DSP_DOWNLOADING = 0, | |
| /* Set GPIO bit 4 to 1 once DSP is downloaded */ | |
| R3DI_DSP_DOWNLOADED = 1 | |
| }; | |
| static void r3di_gpio_mic_set(struct hda_codec *codec, | |
| enum r3di_mic_select cur_mic) | |
| { | |
| unsigned int cur_gpio; | |
| /* Get the current GPIO Data setup */ | |
| cur_gpio = snd_hda_codec_read(codec, 0x01, 0, AC_VERB_GET_GPIO_DATA, 0); | |
| switch (cur_mic) { | |
| case R3DI_REAR_MIC: | |
| cur_gpio &= ~(1 << R3DI_MIC_SELECT_BIT); | |
| break; | |
| case R3DI_FRONT_MIC: | |
| cur_gpio |= (1 << R3DI_MIC_SELECT_BIT); | |
| break; | |
| } | |
| snd_hda_codec_write(codec, codec->core.afg, 0, | |
| AC_VERB_SET_GPIO_DATA, cur_gpio); | |
| } | |
| static void r3di_gpio_dsp_status_set(struct hda_codec *codec, | |
| enum r3di_dsp_status dsp_status) | |
| { | |
| unsigned int cur_gpio; | |
| /* Get the current GPIO Data setup */ | |
| cur_gpio = snd_hda_codec_read(codec, 0x01, 0, AC_VERB_GET_GPIO_DATA, 0); | |
| switch (dsp_status) { | |
| case R3DI_DSP_DOWNLOADING: | |
| cur_gpio |= (1 << R3DI_GPIO_DSP_DOWNLOADING); | |
| snd_hda_codec_write(codec, codec->core.afg, 0, | |
| AC_VERB_SET_GPIO_DATA, cur_gpio); | |
| break; | |
| case R3DI_DSP_DOWNLOADED: | |
| /* Set DOWNLOADING bit to 0. */ | |
| cur_gpio &= ~(1 << R3DI_GPIO_DSP_DOWNLOADING); | |
| snd_hda_codec_write(codec, codec->core.afg, 0, | |
| AC_VERB_SET_GPIO_DATA, cur_gpio); | |
| cur_gpio |= (1 << R3DI_GPIO_DSP_DOWNLOADED); | |
| break; | |
| } | |
| snd_hda_codec_write(codec, codec->core.afg, 0, | |
| AC_VERB_SET_GPIO_DATA, cur_gpio); | |
| } | |
| /* | |
| * PCM callbacks | |
| */ | |
| static int ca0132_playback_pcm_prepare(struct hda_pcm_stream *hinfo, | |
| struct hda_codec *codec, | |
| unsigned int stream_tag, | |
| unsigned int format, | |
| struct snd_pcm_substream *substream) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| snd_hda_codec_setup_stream(codec, spec->dacs[0], stream_tag, 0, format); | |
| return 0; | |
| } | |
| static int ca0132_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, | |
| struct hda_codec *codec, | |
| struct snd_pcm_substream *substream) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| if (spec->dsp_state == DSP_DOWNLOADING) | |
| return 0; | |
| /*If Playback effects are on, allow stream some time to flush | |
| *effects tail*/ | |
| if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]) | |
| msleep(50); | |
| snd_hda_codec_cleanup_stream(codec, spec->dacs[0]); | |
| return 0; | |
| } | |
| static unsigned int ca0132_playback_pcm_delay(struct hda_pcm_stream *info, | |
| struct hda_codec *codec, | |
| struct snd_pcm_substream *substream) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int latency = DSP_PLAYBACK_INIT_LATENCY; | |
| struct snd_pcm_runtime *runtime = substream->runtime; | |
| if (spec->dsp_state != DSP_DOWNLOADED) | |
| return 0; | |
| /* Add latency if playback enhancement and either effect is enabled. */ | |
| if (spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]) { | |
| if ((spec->effects_switch[SURROUND - EFFECT_START_NID]) || | |
| (spec->effects_switch[DIALOG_PLUS - EFFECT_START_NID])) | |
| latency += DSP_PLAY_ENHANCEMENT_LATENCY; | |
| } | |
| /* Applying Speaker EQ adds latency as well. */ | |
| if (spec->cur_out_type == SPEAKER_OUT) | |
| latency += DSP_SPEAKER_OUT_LATENCY; | |
| return (latency * runtime->rate) / 1000; | |
| } | |
| /* | |
| * Digital out | |
| */ | |
| static int ca0132_dig_playback_pcm_open(struct hda_pcm_stream *hinfo, | |
| struct hda_codec *codec, | |
| struct snd_pcm_substream *substream) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| return snd_hda_multi_out_dig_open(codec, &spec->multiout); | |
| } | |
| static int ca0132_dig_playback_pcm_prepare(struct hda_pcm_stream *hinfo, | |
| struct hda_codec *codec, | |
| unsigned int stream_tag, | |
| unsigned int format, | |
| struct snd_pcm_substream *substream) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| return snd_hda_multi_out_dig_prepare(codec, &spec->multiout, | |
| stream_tag, format, substream); | |
| } | |
| static int ca0132_dig_playback_pcm_cleanup(struct hda_pcm_stream *hinfo, | |
| struct hda_codec *codec, | |
| struct snd_pcm_substream *substream) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| return snd_hda_multi_out_dig_cleanup(codec, &spec->multiout); | |
| } | |
| static int ca0132_dig_playback_pcm_close(struct hda_pcm_stream *hinfo, | |
| struct hda_codec *codec, | |
| struct snd_pcm_substream *substream) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| return snd_hda_multi_out_dig_close(codec, &spec->multiout); | |
| } | |
| /* | |
| * Analog capture | |
| */ | |
| static int ca0132_capture_pcm_prepare(struct hda_pcm_stream *hinfo, | |
| struct hda_codec *codec, | |
| unsigned int stream_tag, | |
| unsigned int format, | |
| struct snd_pcm_substream *substream) | |
| { | |
| snd_hda_codec_setup_stream(codec, hinfo->nid, | |
| stream_tag, 0, format); | |
| return 0; | |
| } | |
| static int ca0132_capture_pcm_cleanup(struct hda_pcm_stream *hinfo, | |
| struct hda_codec *codec, | |
| struct snd_pcm_substream *substream) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| if (spec->dsp_state == DSP_DOWNLOADING) | |
| return 0; | |
| snd_hda_codec_cleanup_stream(codec, hinfo->nid); | |
| return 0; | |
| } | |
| static unsigned int ca0132_capture_pcm_delay(struct hda_pcm_stream *info, | |
| struct hda_codec *codec, | |
| struct snd_pcm_substream *substream) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int latency = DSP_CAPTURE_INIT_LATENCY; | |
| struct snd_pcm_runtime *runtime = substream->runtime; | |
| if (spec->dsp_state != DSP_DOWNLOADED) | |
| return 0; | |
| if (spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID]) | |
| latency += DSP_CRYSTAL_VOICE_LATENCY; | |
| return (latency * runtime->rate) / 1000; | |
| } | |
| /* | |
| * Controls stuffs. | |
| */ | |
| /* | |
| * Mixer controls helpers. | |
| */ | |
| #define CA0132_CODEC_VOL_MONO(xname, nid, channel, dir) \ | |
| { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ | |
| .name = xname, \ | |
| .subdevice = HDA_SUBDEV_AMP_FLAG, \ | |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \ | |
| SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ | |
| SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK, \ | |
| .info = ca0132_volume_info, \ | |
| .get = ca0132_volume_get, \ | |
| .put = ca0132_volume_put, \ | |
| .tlv = { .c = ca0132_volume_tlv }, \ | |
| .private_value = HDA_COMPOSE_AMP_VAL(nid, channel, 0, dir) } | |
| /* | |
| * Creates a mixer control that uses defaults of HDA_CODEC_VOL except for the | |
| * volume put, which is used for setting the DSP volume. This was done because | |
| * the ca0132 functions were taking too much time and causing lag. | |
| */ | |
| #define CA0132_ALT_CODEC_VOL_MONO(xname, nid, channel, dir) \ | |
| { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ | |
| .name = xname, \ | |
| .subdevice = HDA_SUBDEV_AMP_FLAG, \ | |
| .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | \ | |
| SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ | |
| SNDRV_CTL_ELEM_ACCESS_TLV_CALLBACK, \ | |
| .info = snd_hda_mixer_amp_volume_info, \ | |
| .get = snd_hda_mixer_amp_volume_get, \ | |
| .put = ca0132_alt_volume_put, \ | |
| .tlv = { .c = snd_hda_mixer_amp_tlv }, \ | |
| .private_value = HDA_COMPOSE_AMP_VAL(nid, channel, 0, dir) } | |
| #define CA0132_CODEC_MUTE_MONO(xname, nid, channel, dir) \ | |
| { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \ | |
| .name = xname, \ | |
| .subdevice = HDA_SUBDEV_AMP_FLAG, \ | |
| .info = snd_hda_mixer_amp_switch_info, \ | |
| .get = ca0132_switch_get, \ | |
| .put = ca0132_switch_put, \ | |
| .private_value = HDA_COMPOSE_AMP_VAL(nid, channel, 0, dir) } | |
| /* stereo */ | |
| #define CA0132_CODEC_VOL(xname, nid, dir) \ | |
| CA0132_CODEC_VOL_MONO(xname, nid, 3, dir) | |
| #define CA0132_ALT_CODEC_VOL(xname, nid, dir) \ | |
| CA0132_ALT_CODEC_VOL_MONO(xname, nid, 3, dir) | |
| #define CA0132_CODEC_MUTE(xname, nid, dir) \ | |
| CA0132_CODEC_MUTE_MONO(xname, nid, 3, dir) | |
| /* lookup tables */ | |
| /* | |
| * Lookup table with decibel values for the DSP. When volume is changed in | |
| * Windows, the DSP is also sent the dB value in floating point. In Windows, | |
| * these values have decimal points, probably because the Windows driver | |
| * actually uses floating point. We can't here, so I made a lookup table of | |
| * values -90 to 9. -90 is the lowest decibel value for both the ADC's and the | |
| * DAC's, and 9 is the maximum. | |
| */ | |
| static const unsigned int float_vol_db_lookup[] = { | |
| 0xC2B40000, 0xC2B20000, 0xC2B00000, 0xC2AE0000, 0xC2AC0000, 0xC2AA0000, | |
| 0xC2A80000, 0xC2A60000, 0xC2A40000, 0xC2A20000, 0xC2A00000, 0xC29E0000, | |
| 0xC29C0000, 0xC29A0000, 0xC2980000, 0xC2960000, 0xC2940000, 0xC2920000, | |
| 0xC2900000, 0xC28E0000, 0xC28C0000, 0xC28A0000, 0xC2880000, 0xC2860000, | |
| 0xC2840000, 0xC2820000, 0xC2800000, 0xC27C0000, 0xC2780000, 0xC2740000, | |
| 0xC2700000, 0xC26C0000, 0xC2680000, 0xC2640000, 0xC2600000, 0xC25C0000, | |
| 0xC2580000, 0xC2540000, 0xC2500000, 0xC24C0000, 0xC2480000, 0xC2440000, | |
| 0xC2400000, 0xC23C0000, 0xC2380000, 0xC2340000, 0xC2300000, 0xC22C0000, | |
| 0xC2280000, 0xC2240000, 0xC2200000, 0xC21C0000, 0xC2180000, 0xC2140000, | |
| 0xC2100000, 0xC20C0000, 0xC2080000, 0xC2040000, 0xC2000000, 0xC1F80000, | |
| 0xC1F00000, 0xC1E80000, 0xC1E00000, 0xC1D80000, 0xC1D00000, 0xC1C80000, | |
| 0xC1C00000, 0xC1B80000, 0xC1B00000, 0xC1A80000, 0xC1A00000, 0xC1980000, | |
| 0xC1900000, 0xC1880000, 0xC1800000, 0xC1700000, 0xC1600000, 0xC1500000, | |
| 0xC1400000, 0xC1300000, 0xC1200000, 0xC1100000, 0xC1000000, 0xC0E00000, | |
| 0xC0C00000, 0xC0A00000, 0xC0800000, 0xC0400000, 0xC0000000, 0xBF800000, | |
| 0x00000000, 0x3F800000, 0x40000000, 0x40400000, 0x40800000, 0x40A00000, | |
| 0x40C00000, 0x40E00000, 0x41000000, 0x41100000 | |
| }; | |
| /* | |
| * This table counts from float 0 to 1 in increments of .01, which is | |
| * useful for a few different sliders. | |
| */ | |
| static const unsigned int float_zero_to_one_lookup[] = { | |
| 0x00000000, 0x3C23D70A, 0x3CA3D70A, 0x3CF5C28F, 0x3D23D70A, 0x3D4CCCCD, | |
| 0x3D75C28F, 0x3D8F5C29, 0x3DA3D70A, 0x3DB851EC, 0x3DCCCCCD, 0x3DE147AE, | |
| 0x3DF5C28F, 0x3E051EB8, 0x3E0F5C29, 0x3E19999A, 0x3E23D70A, 0x3E2E147B, | |
| 0x3E3851EC, 0x3E428F5C, 0x3E4CCCCD, 0x3E570A3D, 0x3E6147AE, 0x3E6B851F, | |
| 0x3E75C28F, 0x3E800000, 0x3E851EB8, 0x3E8A3D71, 0x3E8F5C29, 0x3E947AE1, | |
| 0x3E99999A, 0x3E9EB852, 0x3EA3D70A, 0x3EA8F5C3, 0x3EAE147B, 0x3EB33333, | |
| 0x3EB851EC, 0x3EBD70A4, 0x3EC28F5C, 0x3EC7AE14, 0x3ECCCCCD, 0x3ED1EB85, | |
| 0x3ED70A3D, 0x3EDC28F6, 0x3EE147AE, 0x3EE66666, 0x3EEB851F, 0x3EF0A3D7, | |
| 0x3EF5C28F, 0x3EFAE148, 0x3F000000, 0x3F028F5C, 0x3F051EB8, 0x3F07AE14, | |
| 0x3F0A3D71, 0x3F0CCCCD, 0x3F0F5C29, 0x3F11EB85, 0x3F147AE1, 0x3F170A3D, | |
| 0x3F19999A, 0x3F1C28F6, 0x3F1EB852, 0x3F2147AE, 0x3F23D70A, 0x3F266666, | |
| 0x3F28F5C3, 0x3F2B851F, 0x3F2E147B, 0x3F30A3D7, 0x3F333333, 0x3F35C28F, | |
| 0x3F3851EC, 0x3F3AE148, 0x3F3D70A4, 0x3F400000, 0x3F428F5C, 0x3F451EB8, | |
| 0x3F47AE14, 0x3F4A3D71, 0x3F4CCCCD, 0x3F4F5C29, 0x3F51EB85, 0x3F547AE1, | |
| 0x3F570A3D, 0x3F59999A, 0x3F5C28F6, 0x3F5EB852, 0x3F6147AE, 0x3F63D70A, | |
| 0x3F666666, 0x3F68F5C3, 0x3F6B851F, 0x3F6E147B, 0x3F70A3D7, 0x3F733333, | |
| 0x3F75C28F, 0x3F7851EC, 0x3F7AE148, 0x3F7D70A4, 0x3F800000 | |
| }; | |
| /* | |
| * This table counts from float 10 to 1000, which is the range of the x-bass | |
| * crossover slider in Windows. | |
| */ | |
| static const unsigned int float_xbass_xover_lookup[] = { | |
| 0x41200000, 0x41A00000, 0x41F00000, 0x42200000, 0x42480000, 0x42700000, | |
| 0x428C0000, 0x42A00000, 0x42B40000, 0x42C80000, 0x42DC0000, 0x42F00000, | |
| 0x43020000, 0x430C0000, 0x43160000, 0x43200000, 0x432A0000, 0x43340000, | |
| 0x433E0000, 0x43480000, 0x43520000, 0x435C0000, 0x43660000, 0x43700000, | |
| 0x437A0000, 0x43820000, 0x43870000, 0x438C0000, 0x43910000, 0x43960000, | |
| 0x439B0000, 0x43A00000, 0x43A50000, 0x43AA0000, 0x43AF0000, 0x43B40000, | |
| 0x43B90000, 0x43BE0000, 0x43C30000, 0x43C80000, 0x43CD0000, 0x43D20000, | |
| 0x43D70000, 0x43DC0000, 0x43E10000, 0x43E60000, 0x43EB0000, 0x43F00000, | |
| 0x43F50000, 0x43FA0000, 0x43FF0000, 0x44020000, 0x44048000, 0x44070000, | |
| 0x44098000, 0x440C0000, 0x440E8000, 0x44110000, 0x44138000, 0x44160000, | |
| 0x44188000, 0x441B0000, 0x441D8000, 0x44200000, 0x44228000, 0x44250000, | |
| 0x44278000, 0x442A0000, 0x442C8000, 0x442F0000, 0x44318000, 0x44340000, | |
| 0x44368000, 0x44390000, 0x443B8000, 0x443E0000, 0x44408000, 0x44430000, | |
| 0x44458000, 0x44480000, 0x444A8000, 0x444D0000, 0x444F8000, 0x44520000, | |
| 0x44548000, 0x44570000, 0x44598000, 0x445C0000, 0x445E8000, 0x44610000, | |
| 0x44638000, 0x44660000, 0x44688000, 0x446B0000, 0x446D8000, 0x44700000, | |
| 0x44728000, 0x44750000, 0x44778000, 0x447A0000 | |
| }; | |
| /* The following are for tuning of products */ | |
| #ifdef ENABLE_TUNING_CONTROLS | |
| static const unsigned int voice_focus_vals_lookup[] = { | |
| 0x41A00000, 0x41A80000, 0x41B00000, 0x41B80000, 0x41C00000, 0x41C80000, | |
| 0x41D00000, 0x41D80000, 0x41E00000, 0x41E80000, 0x41F00000, 0x41F80000, | |
| 0x42000000, 0x42040000, 0x42080000, 0x420C0000, 0x42100000, 0x42140000, | |
| 0x42180000, 0x421C0000, 0x42200000, 0x42240000, 0x42280000, 0x422C0000, | |
| 0x42300000, 0x42340000, 0x42380000, 0x423C0000, 0x42400000, 0x42440000, | |
| 0x42480000, 0x424C0000, 0x42500000, 0x42540000, 0x42580000, 0x425C0000, | |
| 0x42600000, 0x42640000, 0x42680000, 0x426C0000, 0x42700000, 0x42740000, | |
| 0x42780000, 0x427C0000, 0x42800000, 0x42820000, 0x42840000, 0x42860000, | |
| 0x42880000, 0x428A0000, 0x428C0000, 0x428E0000, 0x42900000, 0x42920000, | |
| 0x42940000, 0x42960000, 0x42980000, 0x429A0000, 0x429C0000, 0x429E0000, | |
| 0x42A00000, 0x42A20000, 0x42A40000, 0x42A60000, 0x42A80000, 0x42AA0000, | |
| 0x42AC0000, 0x42AE0000, 0x42B00000, 0x42B20000, 0x42B40000, 0x42B60000, | |
| 0x42B80000, 0x42BA0000, 0x42BC0000, 0x42BE0000, 0x42C00000, 0x42C20000, | |
| 0x42C40000, 0x42C60000, 0x42C80000, 0x42CA0000, 0x42CC0000, 0x42CE0000, | |
| 0x42D00000, 0x42D20000, 0x42D40000, 0x42D60000, 0x42D80000, 0x42DA0000, | |
| 0x42DC0000, 0x42DE0000, 0x42E00000, 0x42E20000, 0x42E40000, 0x42E60000, | |
| 0x42E80000, 0x42EA0000, 0x42EC0000, 0x42EE0000, 0x42F00000, 0x42F20000, | |
| 0x42F40000, 0x42F60000, 0x42F80000, 0x42FA0000, 0x42FC0000, 0x42FE0000, | |
| 0x43000000, 0x43010000, 0x43020000, 0x43030000, 0x43040000, 0x43050000, | |
| 0x43060000, 0x43070000, 0x43080000, 0x43090000, 0x430A0000, 0x430B0000, | |
| 0x430C0000, 0x430D0000, 0x430E0000, 0x430F0000, 0x43100000, 0x43110000, | |
| 0x43120000, 0x43130000, 0x43140000, 0x43150000, 0x43160000, 0x43170000, | |
| 0x43180000, 0x43190000, 0x431A0000, 0x431B0000, 0x431C0000, 0x431D0000, | |
| 0x431E0000, 0x431F0000, 0x43200000, 0x43210000, 0x43220000, 0x43230000, | |
| 0x43240000, 0x43250000, 0x43260000, 0x43270000, 0x43280000, 0x43290000, | |
| 0x432A0000, 0x432B0000, 0x432C0000, 0x432D0000, 0x432E0000, 0x432F0000, | |
| 0x43300000, 0x43310000, 0x43320000, 0x43330000, 0x43340000 | |
| }; | |
| static const unsigned int mic_svm_vals_lookup[] = { | |
| 0x00000000, 0x3C23D70A, 0x3CA3D70A, 0x3CF5C28F, 0x3D23D70A, 0x3D4CCCCD, | |
| 0x3D75C28F, 0x3D8F5C29, 0x3DA3D70A, 0x3DB851EC, 0x3DCCCCCD, 0x3DE147AE, | |
| 0x3DF5C28F, 0x3E051EB8, 0x3E0F5C29, 0x3E19999A, 0x3E23D70A, 0x3E2E147B, | |
| 0x3E3851EC, 0x3E428F5C, 0x3E4CCCCD, 0x3E570A3D, 0x3E6147AE, 0x3E6B851F, | |
| 0x3E75C28F, 0x3E800000, 0x3E851EB8, 0x3E8A3D71, 0x3E8F5C29, 0x3E947AE1, | |
| 0x3E99999A, 0x3E9EB852, 0x3EA3D70A, 0x3EA8F5C3, 0x3EAE147B, 0x3EB33333, | |
| 0x3EB851EC, 0x3EBD70A4, 0x3EC28F5C, 0x3EC7AE14, 0x3ECCCCCD, 0x3ED1EB85, | |
| 0x3ED70A3D, 0x3EDC28F6, 0x3EE147AE, 0x3EE66666, 0x3EEB851F, 0x3EF0A3D7, | |
| 0x3EF5C28F, 0x3EFAE148, 0x3F000000, 0x3F028F5C, 0x3F051EB8, 0x3F07AE14, | |
| 0x3F0A3D71, 0x3F0CCCCD, 0x3F0F5C29, 0x3F11EB85, 0x3F147AE1, 0x3F170A3D, | |
| 0x3F19999A, 0x3F1C28F6, 0x3F1EB852, 0x3F2147AE, 0x3F23D70A, 0x3F266666, | |
| 0x3F28F5C3, 0x3F2B851F, 0x3F2E147B, 0x3F30A3D7, 0x3F333333, 0x3F35C28F, | |
| 0x3F3851EC, 0x3F3AE148, 0x3F3D70A4, 0x3F400000, 0x3F428F5C, 0x3F451EB8, | |
| 0x3F47AE14, 0x3F4A3D71, 0x3F4CCCCD, 0x3F4F5C29, 0x3F51EB85, 0x3F547AE1, | |
| 0x3F570A3D, 0x3F59999A, 0x3F5C28F6, 0x3F5EB852, 0x3F6147AE, 0x3F63D70A, | |
| 0x3F666666, 0x3F68F5C3, 0x3F6B851F, 0x3F6E147B, 0x3F70A3D7, 0x3F733333, | |
| 0x3F75C28F, 0x3F7851EC, 0x3F7AE148, 0x3F7D70A4, 0x3F800000 | |
| }; | |
| static const unsigned int equalizer_vals_lookup[] = { | |
| 0xC1C00000, 0xC1B80000, 0xC1B00000, 0xC1A80000, 0xC1A00000, 0xC1980000, | |
| 0xC1900000, 0xC1880000, 0xC1800000, 0xC1700000, 0xC1600000, 0xC1500000, | |
| 0xC1400000, 0xC1300000, 0xC1200000, 0xC1100000, 0xC1000000, 0xC0E00000, | |
| 0xC0C00000, 0xC0A00000, 0xC0800000, 0xC0400000, 0xC0000000, 0xBF800000, | |
| 0x00000000, 0x3F800000, 0x40000000, 0x40400000, 0x40800000, 0x40A00000, | |
| 0x40C00000, 0x40E00000, 0x41000000, 0x41100000, 0x41200000, 0x41300000, | |
| 0x41400000, 0x41500000, 0x41600000, 0x41700000, 0x41800000, 0x41880000, | |
| 0x41900000, 0x41980000, 0x41A00000, 0x41A80000, 0x41B00000, 0x41B80000, | |
| 0x41C00000 | |
| }; | |
| static int tuning_ctl_set(struct hda_codec *codec, hda_nid_t nid, | |
| const unsigned int *lookup, int idx) | |
| { | |
| int i; | |
| for (i = 0; i < TUNING_CTLS_COUNT; i++) { | |
| if (nid == ca0132_tuning_ctls[i].nid) { | |
| CLASS(snd_hda_power, pm)(codec); | |
| dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, | |
| ca0132_tuning_ctls[i].req, | |
| &(lookup[idx]), sizeof(unsigned int)); | |
| return 1; | |
| } | |
| } | |
| return -EINVAL; | |
| } | |
| static int tuning_ctl_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid = get_amp_nid(kcontrol); | |
| long *valp = ucontrol->value.integer.value; | |
| int idx = nid - TUNING_CTL_START_NID; | |
| *valp = spec->cur_ctl_vals[idx]; | |
| return 0; | |
| } | |
| static int voice_focus_ctl_info(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| int chs = get_amp_channels(kcontrol); | |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | |
| uinfo->count = chs == 3 ? 2 : 1; | |
| uinfo->value.integer.min = 20; | |
| uinfo->value.integer.max = 180; | |
| uinfo->value.integer.step = 1; | |
| return 0; | |
| } | |
| static int voice_focus_ctl_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid = get_amp_nid(kcontrol); | |
| long *valp = ucontrol->value.integer.value; | |
| int idx; | |
| idx = nid - TUNING_CTL_START_NID; | |
| /* any change? */ | |
| if (spec->cur_ctl_vals[idx] == *valp) | |
| return 0; | |
| spec->cur_ctl_vals[idx] = *valp; | |
| idx = *valp - 20; | |
| tuning_ctl_set(codec, nid, voice_focus_vals_lookup, idx); | |
| return 1; | |
| } | |
| static int mic_svm_ctl_info(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| int chs = get_amp_channels(kcontrol); | |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | |
| uinfo->count = chs == 3 ? 2 : 1; | |
| uinfo->value.integer.min = 0; | |
| uinfo->value.integer.max = 100; | |
| uinfo->value.integer.step = 1; | |
| return 0; | |
| } | |
| static int mic_svm_ctl_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid = get_amp_nid(kcontrol); | |
| long *valp = ucontrol->value.integer.value; | |
| int idx; | |
| idx = nid - TUNING_CTL_START_NID; | |
| /* any change? */ | |
| if (spec->cur_ctl_vals[idx] == *valp) | |
| return 0; | |
| spec->cur_ctl_vals[idx] = *valp; | |
| idx = *valp; | |
| tuning_ctl_set(codec, nid, mic_svm_vals_lookup, idx); | |
| return 0; | |
| } | |
| static int equalizer_ctl_info(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| int chs = get_amp_channels(kcontrol); | |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | |
| uinfo->count = chs == 3 ? 2 : 1; | |
| uinfo->value.integer.min = 0; | |
| uinfo->value.integer.max = 48; | |
| uinfo->value.integer.step = 1; | |
| return 0; | |
| } | |
| static int equalizer_ctl_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid = get_amp_nid(kcontrol); | |
| long *valp = ucontrol->value.integer.value; | |
| int idx; | |
| idx = nid - TUNING_CTL_START_NID; | |
| /* any change? */ | |
| if (spec->cur_ctl_vals[idx] == *valp) | |
| return 0; | |
| spec->cur_ctl_vals[idx] = *valp; | |
| idx = *valp; | |
| tuning_ctl_set(codec, nid, equalizer_vals_lookup, idx); | |
| return 1; | |
| } | |
| static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(voice_focus_db_scale, 2000, 100, 0); | |
| static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(eq_db_scale, -2400, 100, 0); | |
| static int add_tuning_control(struct hda_codec *codec, | |
| hda_nid_t pnid, hda_nid_t nid, | |
| const char *name, int dir) | |
| { | |
| char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; | |
| int type = dir ? HDA_INPUT : HDA_OUTPUT; | |
| struct snd_kcontrol_new knew = | |
| HDA_CODEC_VOLUME_MONO(namestr, nid, 1, 0, type); | |
| knew.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | | |
| SNDRV_CTL_ELEM_ACCESS_TLV_READ; | |
| knew.tlv.c = NULL; | |
| knew.tlv.p = NULL; | |
| switch (pnid) { | |
| case VOICE_FOCUS: | |
| knew.info = voice_focus_ctl_info; | |
| knew.get = tuning_ctl_get; | |
| knew.put = voice_focus_ctl_put; | |
| knew.tlv.p = voice_focus_db_scale; | |
| break; | |
| case MIC_SVM: | |
| knew.info = mic_svm_ctl_info; | |
| knew.get = tuning_ctl_get; | |
| knew.put = mic_svm_ctl_put; | |
| break; | |
| case EQUALIZER: | |
| knew.info = equalizer_ctl_info; | |
| knew.get = tuning_ctl_get; | |
| knew.put = equalizer_ctl_put; | |
| knew.tlv.p = eq_db_scale; | |
| break; | |
| default: | |
| return 0; | |
| } | |
| knew.private_value = | |
| HDA_COMPOSE_AMP_VAL(nid, 1, 0, type); | |
| snprintf(namestr, sizeof(namestr), "%s %s Volume", name, dirstr[dir]); | |
| return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec)); | |
| } | |
| static int add_tuning_ctls(struct hda_codec *codec) | |
| { | |
| int i; | |
| int err; | |
| for (i = 0; i < TUNING_CTLS_COUNT; i++) { | |
| err = add_tuning_control(codec, | |
| ca0132_tuning_ctls[i].parent_nid, | |
| ca0132_tuning_ctls[i].nid, | |
| ca0132_tuning_ctls[i].name, | |
| ca0132_tuning_ctls[i].direct); | |
| if (err < 0) | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static void ca0132_init_tuning_defaults(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int i; | |
| /* Wedge Angle defaults to 30. 10 below is 30 - 20. 20 is min. */ | |
| spec->cur_ctl_vals[WEDGE_ANGLE - TUNING_CTL_START_NID] = 10; | |
| /* SVM level defaults to 0.74. */ | |
| spec->cur_ctl_vals[SVM_LEVEL - TUNING_CTL_START_NID] = 74; | |
| /* EQ defaults to 0dB. */ | |
| for (i = 2; i < TUNING_CTLS_COUNT; i++) | |
| spec->cur_ctl_vals[i] = 24; | |
| } | |
| #endif /*ENABLE_TUNING_CONTROLS*/ | |
| /* | |
| * Select the active output. | |
| * If autodetect is enabled, output will be selected based on jack detection. | |
| * If jack inserted, headphone will be selected, else built-in speakers | |
| * If autodetect is disabled, output will be selected based on selection. | |
| */ | |
| static int ca0132_select_out(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int pin_ctl; | |
| int jack_present; | |
| int auto_jack; | |
| unsigned int tmp; | |
| int err; | |
| codec_dbg(codec, "ca0132_select_out\n"); | |
| CLASS(snd_hda_power_pm, pm)(codec); | |
| auto_jack = spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID]; | |
| if (auto_jack) | |
| jack_present = snd_hda_jack_detect(codec, spec->unsol_tag_hp); | |
| else | |
| jack_present = | |
| spec->vnode_lswitch[VNID_HP_SEL - VNODE_START_NID]; | |
| if (jack_present) | |
| spec->cur_out_type = HEADPHONE_OUT; | |
| else | |
| spec->cur_out_type = SPEAKER_OUT; | |
| if (spec->cur_out_type == SPEAKER_OUT) { | |
| codec_dbg(codec, "ca0132_select_out speaker\n"); | |
| /*speaker out config*/ | |
| tmp = FLOAT_ONE; | |
| err = dspio_set_uint_param(codec, 0x80, 0x04, tmp); | |
| if (err < 0) | |
| return err; | |
| /*enable speaker EQ*/ | |
| tmp = FLOAT_ONE; | |
| err = dspio_set_uint_param(codec, 0x8f, 0x00, tmp); | |
| if (err < 0) | |
| return err; | |
| /* Setup EAPD */ | |
| snd_hda_codec_write(codec, spec->out_pins[1], 0, | |
| VENDOR_CHIPIO_EAPD_SEL_SET, 0x02); | |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, | |
| AC_VERB_SET_EAPD_BTLENABLE, 0x00); | |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, | |
| VENDOR_CHIPIO_EAPD_SEL_SET, 0x00); | |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, | |
| AC_VERB_SET_EAPD_BTLENABLE, 0x02); | |
| /* disable headphone node */ | |
| pin_ctl = snd_hda_codec_read(codec, spec->out_pins[1], 0, | |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); | |
| snd_hda_set_pin_ctl(codec, spec->out_pins[1], | |
| pin_ctl & ~PIN_HP); | |
| /* enable speaker node */ | |
| pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0, | |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); | |
| snd_hda_set_pin_ctl(codec, spec->out_pins[0], | |
| pin_ctl | PIN_OUT); | |
| } else { | |
| codec_dbg(codec, "ca0132_select_out hp\n"); | |
| /*headphone out config*/ | |
| tmp = FLOAT_ZERO; | |
| err = dspio_set_uint_param(codec, 0x80, 0x04, tmp); | |
| if (err < 0) | |
| return err; | |
| /*disable speaker EQ*/ | |
| tmp = FLOAT_ZERO; | |
| err = dspio_set_uint_param(codec, 0x8f, 0x00, tmp); | |
| if (err < 0) | |
| return err; | |
| /* Setup EAPD */ | |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, | |
| VENDOR_CHIPIO_EAPD_SEL_SET, 0x00); | |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, | |
| AC_VERB_SET_EAPD_BTLENABLE, 0x00); | |
| snd_hda_codec_write(codec, spec->out_pins[1], 0, | |
| VENDOR_CHIPIO_EAPD_SEL_SET, 0x02); | |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, | |
| AC_VERB_SET_EAPD_BTLENABLE, 0x02); | |
| /* disable speaker*/ | |
| pin_ctl = snd_hda_codec_read(codec, spec->out_pins[0], 0, | |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); | |
| snd_hda_set_pin_ctl(codec, spec->out_pins[0], | |
| pin_ctl & ~PIN_HP); | |
| /* enable headphone*/ | |
| pin_ctl = snd_hda_codec_read(codec, spec->out_pins[1], 0, | |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); | |
| snd_hda_set_pin_ctl(codec, spec->out_pins[1], | |
| pin_ctl | PIN_HP); | |
| } | |
| return 0; | |
| } | |
| static int ae5_headphone_gain_set(struct hda_codec *codec, long val); | |
| static int zxr_headphone_gain_set(struct hda_codec *codec, long val); | |
| static int ca0132_effects_set(struct hda_codec *codec, hda_nid_t nid, long val); | |
| static void ae5_mmio_select_out(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| const struct ae_ca0113_output_set *out_cmds; | |
| unsigned int i; | |
| if (ca0132_quirk(spec) == QUIRK_AE5) | |
| out_cmds = &ae5_ca0113_output_presets; | |
| else | |
| out_cmds = &ae7_ca0113_output_presets; | |
| for (i = 0; i < AE_CA0113_OUT_SET_COMMANDS; i++) | |
| ca0113_mmio_command_set(codec, out_cmds->group[i], | |
| out_cmds->target[i], | |
| out_cmds->vals[spec->cur_out_type][i]); | |
| } | |
| static int ca0132_alt_set_full_range_speaker(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int quirk = ca0132_quirk(spec); | |
| unsigned int tmp; | |
| int err; | |
| /* 2.0/4.0 setup has no LFE channel, so setting full-range does nothing. */ | |
| if (spec->channel_cfg_val == SPEAKER_CHANNELS_4_0 | |
| || spec->channel_cfg_val == SPEAKER_CHANNELS_2_0) | |
| return 0; | |
| /* Set front L/R full range. Zero for full-range, one for redirection. */ | |
| tmp = spec->speaker_range_val[0] ? FLOAT_ZERO : FLOAT_ONE; | |
| err = dspio_set_uint_param(codec, 0x96, | |
| SPEAKER_FULL_RANGE_FRONT_L_R, tmp); | |
| if (err < 0) | |
| return err; | |
| /* When setting full-range rear, both rear and center/lfe are set. */ | |
| tmp = spec->speaker_range_val[1] ? FLOAT_ZERO : FLOAT_ONE; | |
| err = dspio_set_uint_param(codec, 0x96, | |
| SPEAKER_FULL_RANGE_CENTER_LFE, tmp); | |
| if (err < 0) | |
| return err; | |
| err = dspio_set_uint_param(codec, 0x96, | |
| SPEAKER_FULL_RANGE_REAR_L_R, tmp); | |
| if (err < 0) | |
| return err; | |
| /* | |
| * Only the AE series cards set this value when setting full-range, | |
| * and it's always 1.0f. | |
| */ | |
| if (quirk == QUIRK_AE5 || quirk == QUIRK_AE7) { | |
| err = dspio_set_uint_param(codec, 0x96, | |
| SPEAKER_FULL_RANGE_SURROUND_L_R, FLOAT_ONE); | |
| if (err < 0) | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static int ca0132_alt_surround_set_bass_redirection(struct hda_codec *codec, | |
| bool val) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int tmp; | |
| int err; | |
| if (val && spec->channel_cfg_val != SPEAKER_CHANNELS_4_0 && | |
| spec->channel_cfg_val != SPEAKER_CHANNELS_2_0) | |
| tmp = FLOAT_ONE; | |
| else | |
| tmp = FLOAT_ZERO; | |
| err = dspio_set_uint_param(codec, 0x96, SPEAKER_BASS_REDIRECT, tmp); | |
| if (err < 0) | |
| return err; | |
| /* If it is enabled, make sure to set the crossover frequency. */ | |
| if (tmp) { | |
| tmp = float_xbass_xover_lookup[spec->xbass_xover_freq]; | |
| err = dspio_set_uint_param(codec, 0x96, | |
| SPEAKER_BASS_REDIRECT_XOVER_FREQ, tmp); | |
| if (err < 0) | |
| return err; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * These are the commands needed to setup output on each of the different card | |
| * types. | |
| */ | |
| static void ca0132_alt_select_out_get_quirk_data(struct hda_codec *codec, | |
| const struct ca0132_alt_out_set_quirk_data **quirk_data) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int quirk = ca0132_quirk(spec); | |
| unsigned int i; | |
| *quirk_data = NULL; | |
| for (i = 0; i < ARRAY_SIZE(quirk_out_set_data); i++) { | |
| if (quirk_out_set_data[i].quirk_id == quirk) { | |
| *quirk_data = &quirk_out_set_data[i]; | |
| return; | |
| } | |
| } | |
| } | |
| static int ca0132_alt_select_out_quirk_set(struct hda_codec *codec) | |
| { | |
| const struct ca0132_alt_out_set_quirk_data *quirk_data; | |
| const struct ca0132_alt_out_set_info *out_info; | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int i, gpio_data; | |
| int err; | |
| ca0132_alt_select_out_get_quirk_data(codec, &quirk_data); | |
| if (!quirk_data) | |
| return 0; | |
| out_info = &quirk_data->out_set_info[spec->cur_out_type]; | |
| if (quirk_data->is_ae_series) | |
| ae5_mmio_select_out(codec); | |
| if (out_info->has_hda_gpio) { | |
| gpio_data = snd_hda_codec_read(codec, codec->core.afg, 0, | |
| AC_VERB_GET_GPIO_DATA, 0); | |
| if (out_info->hda_gpio_set) | |
| gpio_data |= (1 << out_info->hda_gpio_pin); | |
| else | |
| gpio_data &= ~(1 << out_info->hda_gpio_pin); | |
| snd_hda_codec_write(codec, codec->core.afg, 0, | |
| AC_VERB_SET_GPIO_DATA, gpio_data); | |
| } | |
| if (out_info->mmio_gpio_count) { | |
| for (i = 0; i < out_info->mmio_gpio_count; i++) { | |
| ca0113_mmio_gpio_set(codec, out_info->mmio_gpio_pin[i], | |
| out_info->mmio_gpio_set[i]); | |
| } | |
| } | |
| if (out_info->scp_cmds_count) { | |
| for (i = 0; i < out_info->scp_cmds_count; i++) { | |
| err = dspio_set_uint_param(codec, | |
| out_info->scp_cmd_mid[i], | |
| out_info->scp_cmd_req[i], | |
| out_info->scp_cmd_val[i]); | |
| if (err < 0) | |
| return err; | |
| } | |
| } | |
| chipio_set_control_param(codec, 0x0d, out_info->dac2port); | |
| if (out_info->has_chipio_write) { | |
| chipio_write(codec, out_info->chipio_write_addr, | |
| out_info->chipio_write_data); | |
| } | |
| if (quirk_data->has_headphone_gain) { | |
| if (spec->cur_out_type != HEADPHONE_OUT) { | |
| if (quirk_data->is_ae_series) | |
| ae5_headphone_gain_set(codec, 2); | |
| else | |
| zxr_headphone_gain_set(codec, 0); | |
| } else { | |
| if (quirk_data->is_ae_series) | |
| ae5_headphone_gain_set(codec, | |
| spec->ae5_headphone_gain_val); | |
| else | |
| zxr_headphone_gain_set(codec, | |
| spec->zxr_gain_set); | |
| } | |
| } | |
| return 0; | |
| } | |
| static void ca0132_set_out_node_pincfg(struct hda_codec *codec, hda_nid_t nid, | |
| bool out_enable, bool hp_enable) | |
| { | |
| unsigned int pin_ctl; | |
| pin_ctl = snd_hda_codec_read(codec, nid, 0, | |
| AC_VERB_GET_PIN_WIDGET_CONTROL, 0); | |
| pin_ctl = hp_enable ? pin_ctl | PIN_HP_AMP : pin_ctl & ~PIN_HP_AMP; | |
| pin_ctl = out_enable ? pin_ctl | PIN_OUT : pin_ctl & ~PIN_OUT; | |
| snd_hda_set_pin_ctl(codec, nid, pin_ctl); | |
| } | |
| /* | |
| * This function behaves similarly to the ca0132_select_out funciton above, | |
| * except with a few differences. It adds the ability to select the current | |
| * output with an enumerated control "output source" if the auto detect | |
| * mute switch is set to off. If the auto detect mute switch is enabled, it | |
| * will detect either headphone or lineout(SPEAKER_OUT) from jack detection. | |
| * It also adds the ability to auto-detect the front headphone port. | |
| */ | |
| static int ca0132_alt_select_out(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int tmp, outfx_set; | |
| int jack_present; | |
| int auto_jack; | |
| int err; | |
| /* Default Headphone is rear headphone */ | |
| hda_nid_t headphone_nid = spec->out_pins[1]; | |
| codec_dbg(codec, "%s\n", __func__); | |
| CLASS(snd_hda_power_pm, pm)(codec); | |
| auto_jack = spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID]; | |
| /* | |
| * If headphone rear or front is plugged in, set to headphone. | |
| * If neither is plugged in, set to rear line out. Only if | |
| * hp/speaker auto detect is enabled. | |
| */ | |
| if (auto_jack) { | |
| jack_present = snd_hda_jack_detect(codec, spec->unsol_tag_hp) || | |
| snd_hda_jack_detect(codec, spec->unsol_tag_front_hp); | |
| if (jack_present) | |
| spec->cur_out_type = HEADPHONE_OUT; | |
| else | |
| spec->cur_out_type = SPEAKER_OUT; | |
| } else | |
| spec->cur_out_type = spec->out_enum_val; | |
| outfx_set = spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]; | |
| /* Begin DSP output switch, mute DSP volume. */ | |
| err = dspio_set_uint_param(codec, 0x96, SPEAKER_TUNING_MUTE, FLOAT_ONE); | |
| if (err < 0) | |
| return err; | |
| err = ca0132_alt_select_out_quirk_set(codec); | |
| if (err < 0) | |
| return err; | |
| switch (spec->cur_out_type) { | |
| case SPEAKER_OUT: | |
| codec_dbg(codec, "%s speaker\n", __func__); | |
| /* Enable EAPD */ | |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, | |
| AC_VERB_SET_EAPD_BTLENABLE, 0x01); | |
| /* Disable headphone node. */ | |
| ca0132_set_out_node_pincfg(codec, spec->out_pins[1], 0, 0); | |
| /* Set front L-R to output. */ | |
| ca0132_set_out_node_pincfg(codec, spec->out_pins[0], 1, 0); | |
| /* Set Center/LFE to output. */ | |
| ca0132_set_out_node_pincfg(codec, spec->out_pins[2], 1, 0); | |
| /* Set rear surround to output. */ | |
| ca0132_set_out_node_pincfg(codec, spec->out_pins[3], 1, 0); | |
| /* | |
| * Without PlayEnhancement being enabled, if we've got a 2.0 | |
| * setup, set it to floating point eight to disable any DSP | |
| * processing effects. | |
| */ | |
| if (!outfx_set && spec->channel_cfg_val == SPEAKER_CHANNELS_2_0) | |
| tmp = FLOAT_EIGHT; | |
| else | |
| tmp = speaker_channel_cfgs[spec->channel_cfg_val].val; | |
| err = dspio_set_uint_param(codec, 0x80, 0x04, tmp); | |
| if (err < 0) | |
| return err; | |
| break; | |
| case HEADPHONE_OUT: | |
| codec_dbg(codec, "%s hp\n", __func__); | |
| snd_hda_codec_write(codec, spec->out_pins[0], 0, | |
| AC_VERB_SET_EAPD_BTLENABLE, 0x00); | |
| /* Disable all speaker nodes. */ | |
| ca0132_set_out_node_pincfg(codec, spec->out_pins[0], 0, 0); | |
| ca0132_set_out_node_pincfg(codec, spec->out_pins[2], 0, 0); | |
| ca0132_set_out_node_pincfg(codec, spec->out_pins[3], 0, 0); | |
| /* enable headphone, either front or rear */ | |
| if (snd_hda_jack_detect(codec, spec->unsol_tag_front_hp)) | |
| headphone_nid = spec->out_pins[2]; | |
| else if (snd_hda_jack_detect(codec, spec->unsol_tag_hp)) | |
| headphone_nid = spec->out_pins[1]; | |
| ca0132_set_out_node_pincfg(codec, headphone_nid, 1, 1); | |
| if (outfx_set) | |
| err = dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_ONE); | |
| else | |
| err = dspio_set_uint_param(codec, 0x80, 0x04, FLOAT_ZERO); | |
| if (err < 0) | |
| return err; | |
| break; | |
| } | |
| /* | |
| * If output effects are enabled, set the X-Bass effect value again to | |
| * make sure that it's properly enabled/disabled for speaker | |
| * configurations with an LFE channel. | |
| */ | |
| if (outfx_set) | |
| ca0132_effects_set(codec, X_BASS, | |
| spec->effects_switch[X_BASS - EFFECT_START_NID]); | |
| /* Set speaker EQ bypass attenuation to 0. */ | |
| err = dspio_set_uint_param(codec, 0x8f, 0x01, FLOAT_ZERO); | |
| if (err < 0) | |
| return err; | |
| /* | |
| * Although unused on all cards but the AE series, this is always set | |
| * to zero when setting the output. | |
| */ | |
| err = dspio_set_uint_param(codec, 0x96, | |
| SPEAKER_TUNING_USE_SPEAKER_EQ, FLOAT_ZERO); | |
| if (err < 0) | |
| return err; | |
| if (spec->cur_out_type == SPEAKER_OUT) | |
| err = ca0132_alt_surround_set_bass_redirection(codec, | |
| spec->bass_redirection_val); | |
| else | |
| err = ca0132_alt_surround_set_bass_redirection(codec, 0); | |
| if (err < 0) | |
| return err; | |
| /* Unmute DSP now that we're done with output selection. */ | |
| err = dspio_set_uint_param(codec, 0x96, | |
| SPEAKER_TUNING_MUTE, FLOAT_ZERO); | |
| if (err < 0) | |
| return err; | |
| if (spec->cur_out_type == SPEAKER_OUT) { | |
| err = ca0132_alt_set_full_range_speaker(codec); | |
| if (err < 0) | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static void ca0132_unsol_hp_delayed(struct work_struct *work) | |
| { | |
| struct ca0132_spec *spec = container_of( | |
| to_delayed_work(work), struct ca0132_spec, unsol_hp_work); | |
| struct hda_jack_tbl *jack; | |
| if (ca0132_use_alt_functions(spec)) | |
| ca0132_alt_select_out(spec->codec); | |
| else | |
| ca0132_select_out(spec->codec); | |
| jack = snd_hda_jack_tbl_get(spec->codec, spec->unsol_tag_hp); | |
| if (jack) { | |
| jack->block_report = 0; | |
| snd_hda_jack_report_sync(spec->codec); | |
| } | |
| } | |
| static void ca0132_set_dmic(struct hda_codec *codec, int enable); | |
| static int ca0132_mic_boost_set(struct hda_codec *codec, long val); | |
| static void resume_mic1(struct hda_codec *codec, unsigned int oldval); | |
| static int stop_mic1(struct hda_codec *codec); | |
| static int ca0132_cvoice_switch_set(struct hda_codec *codec); | |
| static int ca0132_alt_mic_boost_set(struct hda_codec *codec, long val); | |
| /* | |
| * Select the active VIP source | |
| */ | |
| static int ca0132_set_vipsource(struct hda_codec *codec, int val) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int tmp; | |
| if (spec->dsp_state != DSP_DOWNLOADED) | |
| return 0; | |
| /* if CrystalVoice if off, vipsource should be 0 */ | |
| if (!spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID] || | |
| (val == 0)) { | |
| chipio_set_control_param(codec, CONTROL_PARAM_VIP_SOURCE, 0); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); | |
| if (spec->cur_mic_type == DIGITAL_MIC) | |
| tmp = FLOAT_TWO; | |
| else | |
| tmp = FLOAT_ONE; | |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); | |
| tmp = FLOAT_ZERO; | |
| dspio_set_uint_param(codec, 0x80, 0x05, tmp); | |
| } else { | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_16_000); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_16_000); | |
| if (spec->cur_mic_type == DIGITAL_MIC) | |
| tmp = FLOAT_TWO; | |
| else | |
| tmp = FLOAT_ONE; | |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); | |
| tmp = FLOAT_ONE; | |
| dspio_set_uint_param(codec, 0x80, 0x05, tmp); | |
| msleep(20); | |
| chipio_set_control_param(codec, CONTROL_PARAM_VIP_SOURCE, val); | |
| } | |
| return 1; | |
| } | |
| static int ca0132_alt_set_vipsource(struct hda_codec *codec, int val) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int tmp; | |
| if (spec->dsp_state != DSP_DOWNLOADED) | |
| return 0; | |
| codec_dbg(codec, "%s\n", __func__); | |
| chipio_set_stream_control(codec, 0x03, 0); | |
| chipio_set_stream_control(codec, 0x04, 0); | |
| /* if CrystalVoice is off, vipsource should be 0 */ | |
| if (!spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID] || | |
| (val == 0) || spec->in_enum_val == REAR_LINE_IN) { | |
| codec_dbg(codec, "%s: off.", __func__); | |
| chipio_set_control_param(codec, CONTROL_PARAM_VIP_SOURCE, 0); | |
| tmp = FLOAT_ZERO; | |
| dspio_set_uint_param(codec, 0x80, 0x05, tmp); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); | |
| if (ca0132_quirk(spec) == QUIRK_R3DI) | |
| chipio_set_conn_rate(codec, 0x0F, SR_96_000); | |
| if (spec->in_enum_val == REAR_LINE_IN) | |
| tmp = FLOAT_ZERO; | |
| else { | |
| if (ca0132_quirk(spec) == QUIRK_SBZ) | |
| tmp = FLOAT_THREE; | |
| else | |
| tmp = FLOAT_ONE; | |
| } | |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); | |
| } else { | |
| codec_dbg(codec, "%s: on.", __func__); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_16_000); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_16_000); | |
| if (ca0132_quirk(spec) == QUIRK_R3DI) | |
| chipio_set_conn_rate(codec, 0x0F, SR_16_000); | |
| if (spec->effects_switch[VOICE_FOCUS - EFFECT_START_NID]) | |
| tmp = FLOAT_TWO; | |
| else | |
| tmp = FLOAT_ONE; | |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); | |
| tmp = FLOAT_ONE; | |
| dspio_set_uint_param(codec, 0x80, 0x05, tmp); | |
| msleep(20); | |
| chipio_set_control_param(codec, CONTROL_PARAM_VIP_SOURCE, val); | |
| } | |
| chipio_set_stream_control(codec, 0x03, 1); | |
| chipio_set_stream_control(codec, 0x04, 1); | |
| return 1; | |
| } | |
| /* | |
| * Select the active microphone. | |
| * If autodetect is enabled, mic will be selected based on jack detection. | |
| * If jack inserted, ext.mic will be selected, else built-in mic | |
| * If autodetect is disabled, mic will be selected based on selection. | |
| */ | |
| static int ca0132_select_mic(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int jack_present; | |
| int auto_jack; | |
| codec_dbg(codec, "ca0132_select_mic\n"); | |
| CLASS(snd_hda_power_pm, pm)(codec); | |
| auto_jack = spec->vnode_lswitch[VNID_AMIC1_ASEL - VNODE_START_NID]; | |
| if (auto_jack) | |
| jack_present = snd_hda_jack_detect(codec, spec->unsol_tag_amic1); | |
| else | |
| jack_present = | |
| spec->vnode_lswitch[VNID_AMIC1_SEL - VNODE_START_NID]; | |
| if (jack_present) | |
| spec->cur_mic_type = LINE_MIC_IN; | |
| else | |
| spec->cur_mic_type = DIGITAL_MIC; | |
| if (spec->cur_mic_type == DIGITAL_MIC) { | |
| /* enable digital Mic */ | |
| chipio_set_conn_rate(codec, MEM_CONNID_DMIC, SR_32_000); | |
| ca0132_set_dmic(codec, 1); | |
| ca0132_mic_boost_set(codec, 0); | |
| /* set voice focus */ | |
| ca0132_effects_set(codec, VOICE_FOCUS, | |
| spec->effects_switch | |
| [VOICE_FOCUS - EFFECT_START_NID]); | |
| } else { | |
| /* disable digital Mic */ | |
| chipio_set_conn_rate(codec, MEM_CONNID_DMIC, SR_96_000); | |
| ca0132_set_dmic(codec, 0); | |
| ca0132_mic_boost_set(codec, spec->cur_mic_boost); | |
| /* disable voice focus */ | |
| ca0132_effects_set(codec, VOICE_FOCUS, 0); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Select the active input. | |
| * Mic detection isn't used, because it's kind of pointless on the SBZ. | |
| * The front mic has no jack-detection, so the only way to switch to it | |
| * is to do it manually in alsamixer. | |
| */ | |
| static int ca0132_alt_select_in(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int tmp; | |
| codec_dbg(codec, "%s\n", __func__); | |
| CLASS(snd_hda_power_pm, pm)(codec); | |
| chipio_set_stream_control(codec, 0x03, 0); | |
| chipio_set_stream_control(codec, 0x04, 0); | |
| spec->cur_mic_type = spec->in_enum_val; | |
| switch (spec->cur_mic_type) { | |
| case REAR_MIC: | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| case QUIRK_R3D: | |
| ca0113_mmio_gpio_set(codec, 0, false); | |
| tmp = FLOAT_THREE; | |
| break; | |
| case QUIRK_ZXR: | |
| tmp = FLOAT_THREE; | |
| break; | |
| case QUIRK_R3DI: | |
| r3di_gpio_mic_set(codec, R3DI_REAR_MIC); | |
| tmp = FLOAT_ONE; | |
| break; | |
| case QUIRK_AE5: | |
| ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00); | |
| tmp = FLOAT_THREE; | |
| break; | |
| case QUIRK_AE7: | |
| ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00); | |
| tmp = FLOAT_THREE; | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN2, | |
| SR_96_000); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2, | |
| SR_96_000); | |
| dspio_set_uint_param(codec, 0x80, 0x01, FLOAT_ZERO); | |
| break; | |
| default: | |
| tmp = FLOAT_ONE; | |
| break; | |
| } | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); | |
| if (ca0132_quirk(spec) == QUIRK_R3DI) | |
| chipio_set_conn_rate(codec, 0x0F, SR_96_000); | |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); | |
| chipio_set_stream_control(codec, 0x03, 1); | |
| chipio_set_stream_control(codec, 0x04, 1); | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| chipio_write(codec, 0x18B098, 0x0000000C); | |
| chipio_write(codec, 0x18B09C, 0x0000000C); | |
| break; | |
| case QUIRK_ZXR: | |
| chipio_write(codec, 0x18B098, 0x0000000C); | |
| chipio_write(codec, 0x18B09C, 0x000000CC); | |
| break; | |
| case QUIRK_AE5: | |
| chipio_write(codec, 0x18B098, 0x0000000C); | |
| chipio_write(codec, 0x18B09C, 0x0000004C); | |
| break; | |
| default: | |
| break; | |
| } | |
| ca0132_alt_mic_boost_set(codec, spec->mic_boost_enum_val); | |
| break; | |
| case REAR_LINE_IN: | |
| ca0132_mic_boost_set(codec, 0); | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| case QUIRK_R3D: | |
| ca0113_mmio_gpio_set(codec, 0, false); | |
| break; | |
| case QUIRK_R3DI: | |
| r3di_gpio_mic_set(codec, R3DI_REAR_MIC); | |
| break; | |
| case QUIRK_AE5: | |
| ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00); | |
| break; | |
| case QUIRK_AE7: | |
| ca0113_mmio_command_set(codec, 0x30, 0x28, 0x3f); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN2, | |
| SR_96_000); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2, | |
| SR_96_000); | |
| dspio_set_uint_param(codec, 0x80, 0x01, FLOAT_ZERO); | |
| break; | |
| default: | |
| break; | |
| } | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); | |
| if (ca0132_quirk(spec) == QUIRK_R3DI) | |
| chipio_set_conn_rate(codec, 0x0F, SR_96_000); | |
| if (ca0132_quirk(spec) == QUIRK_AE7) | |
| tmp = FLOAT_THREE; | |
| else | |
| tmp = FLOAT_ZERO; | |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| case QUIRK_AE5: | |
| chipio_write(codec, 0x18B098, 0x00000000); | |
| chipio_write(codec, 0x18B09C, 0x00000000); | |
| break; | |
| default: | |
| break; | |
| } | |
| chipio_set_stream_control(codec, 0x03, 1); | |
| chipio_set_stream_control(codec, 0x04, 1); | |
| break; | |
| case FRONT_MIC: | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| case QUIRK_R3D: | |
| ca0113_mmio_gpio_set(codec, 0, true); | |
| ca0113_mmio_gpio_set(codec, 5, false); | |
| tmp = FLOAT_THREE; | |
| break; | |
| case QUIRK_R3DI: | |
| r3di_gpio_mic_set(codec, R3DI_FRONT_MIC); | |
| tmp = FLOAT_ONE; | |
| break; | |
| case QUIRK_AE5: | |
| ca0113_mmio_command_set(codec, 0x30, 0x28, 0x3f); | |
| tmp = FLOAT_THREE; | |
| break; | |
| default: | |
| tmp = FLOAT_ONE; | |
| break; | |
| } | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); | |
| if (ca0132_quirk(spec) == QUIRK_R3DI) | |
| chipio_set_conn_rate(codec, 0x0F, SR_96_000); | |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); | |
| chipio_set_stream_control(codec, 0x03, 1); | |
| chipio_set_stream_control(codec, 0x04, 1); | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| chipio_write(codec, 0x18B098, 0x0000000C); | |
| chipio_write(codec, 0x18B09C, 0x000000CC); | |
| break; | |
| case QUIRK_AE5: | |
| chipio_write(codec, 0x18B098, 0x0000000C); | |
| chipio_write(codec, 0x18B09C, 0x0000004C); | |
| break; | |
| default: | |
| break; | |
| } | |
| ca0132_alt_mic_boost_set(codec, spec->mic_boost_enum_val); | |
| break; | |
| } | |
| ca0132_cvoice_switch_set(codec); | |
| return 0; | |
| } | |
| /* | |
| * Check if VNODE settings take effect immediately. | |
| */ | |
| static bool ca0132_is_vnode_effective(struct hda_codec *codec, | |
| hda_nid_t vnid, | |
| hda_nid_t *shared_nid) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid; | |
| switch (vnid) { | |
| case VNID_SPK: | |
| nid = spec->shared_out_nid; | |
| break; | |
| case VNID_MIC: | |
| nid = spec->shared_mic_nid; | |
| break; | |
| default: | |
| return false; | |
| } | |
| if (shared_nid) | |
| *shared_nid = nid; | |
| return true; | |
| } | |
| /* | |
| * The following functions are control change helpers. | |
| * They return 0 if no changed. Return 1 if changed. | |
| */ | |
| static int ca0132_voicefx_set(struct hda_codec *codec, int enable) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int tmp; | |
| /* based on CrystalVoice state to enable VoiceFX. */ | |
| if (enable) { | |
| tmp = spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID] ? | |
| FLOAT_ONE : FLOAT_ZERO; | |
| } else { | |
| tmp = FLOAT_ZERO; | |
| } | |
| dspio_set_uint_param(codec, ca0132_voicefx.mid, | |
| ca0132_voicefx.reqs[0], tmp); | |
| return 1; | |
| } | |
| /* | |
| * Set the effects parameters | |
| */ | |
| static int ca0132_effects_set(struct hda_codec *codec, hda_nid_t nid, long val) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int on, tmp, channel_cfg; | |
| int num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT; | |
| int err = 0; | |
| int idx = nid - EFFECT_START_NID; | |
| if ((idx < 0) || (idx >= num_fx)) | |
| return 0; /* no changed */ | |
| /* for out effect, qualify with PE */ | |
| if ((nid >= OUT_EFFECT_START_NID) && (nid < OUT_EFFECT_END_NID)) { | |
| /* if PE if off, turn off out effects. */ | |
| if (!spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]) | |
| val = 0; | |
| if (spec->cur_out_type == SPEAKER_OUT && nid == X_BASS) { | |
| channel_cfg = spec->channel_cfg_val; | |
| if (channel_cfg != SPEAKER_CHANNELS_2_0 && | |
| channel_cfg != SPEAKER_CHANNELS_4_0) | |
| val = 0; | |
| } | |
| } | |
| /* for in effect, qualify with CrystalVoice */ | |
| if ((nid >= IN_EFFECT_START_NID) && (nid < IN_EFFECT_END_NID)) { | |
| /* if CrystalVoice if off, turn off in effects. */ | |
| if (!spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID]) | |
| val = 0; | |
| /* Voice Focus applies to 2-ch Mic, Digital Mic */ | |
| if ((nid == VOICE_FOCUS) && (spec->cur_mic_type != DIGITAL_MIC)) | |
| val = 0; | |
| /* If Voice Focus on SBZ, set to two channel. */ | |
| if ((nid == VOICE_FOCUS) && ca0132_use_pci_mmio(spec) | |
| && (spec->cur_mic_type != REAR_LINE_IN)) { | |
| if (spec->effects_switch[CRYSTAL_VOICE - | |
| EFFECT_START_NID]) { | |
| if (spec->effects_switch[VOICE_FOCUS - | |
| EFFECT_START_NID]) { | |
| tmp = FLOAT_TWO; | |
| val = 1; | |
| } else | |
| tmp = FLOAT_ONE; | |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); | |
| } | |
| } | |
| /* | |
| * For SBZ noise reduction, there's an extra command | |
| * to module ID 0x47. No clue why. | |
| */ | |
| if ((nid == NOISE_REDUCTION) && ca0132_use_pci_mmio(spec) | |
| && (spec->cur_mic_type != REAR_LINE_IN)) { | |
| if (spec->effects_switch[CRYSTAL_VOICE - | |
| EFFECT_START_NID]) { | |
| if (spec->effects_switch[NOISE_REDUCTION - | |
| EFFECT_START_NID]) | |
| tmp = FLOAT_ONE; | |
| else | |
| tmp = FLOAT_ZERO; | |
| } else | |
| tmp = FLOAT_ZERO; | |
| dspio_set_uint_param(codec, 0x47, 0x00, tmp); | |
| } | |
| /* If rear line in disable effects. */ | |
| if (ca0132_use_alt_functions(spec) && | |
| spec->in_enum_val == REAR_LINE_IN) | |
| val = 0; | |
| } | |
| codec_dbg(codec, "ca0132_effect_set: nid=0x%x, val=%ld\n", | |
| nid, val); | |
| on = (val == 0) ? FLOAT_ZERO : FLOAT_ONE; | |
| err = dspio_set_uint_param(codec, ca0132_effects[idx].mid, | |
| ca0132_effects[idx].reqs[0], on); | |
| if (err < 0) | |
| return 0; /* no changed */ | |
| return 1; | |
| } | |
| /* | |
| * Turn on/off Playback Enhancements | |
| */ | |
| static int ca0132_pe_switch_set(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid; | |
| int i, ret = 0; | |
| codec_dbg(codec, "ca0132_pe_switch_set: val=%ld\n", | |
| spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID]); | |
| if (ca0132_use_alt_functions(spec)) | |
| ca0132_alt_select_out(codec); | |
| i = OUT_EFFECT_START_NID - EFFECT_START_NID; | |
| nid = OUT_EFFECT_START_NID; | |
| /* PE affects all out effects */ | |
| for (; nid < OUT_EFFECT_END_NID; nid++, i++) | |
| ret |= ca0132_effects_set(codec, nid, spec->effects_switch[i]); | |
| return ret; | |
| } | |
| /* Check if Mic1 is streaming, if so, stop streaming */ | |
| static int stop_mic1(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int oldval = snd_hda_codec_read(codec, spec->adcs[0], 0, | |
| AC_VERB_GET_CONV, 0); | |
| if (oldval != 0) | |
| snd_hda_codec_write(codec, spec->adcs[0], 0, | |
| AC_VERB_SET_CHANNEL_STREAMID, | |
| 0); | |
| return oldval; | |
| } | |
| /* Resume Mic1 streaming if it was stopped. */ | |
| static void resume_mic1(struct hda_codec *codec, unsigned int oldval) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| /* Restore the previous stream and channel */ | |
| if (oldval != 0) | |
| snd_hda_codec_write(codec, spec->adcs[0], 0, | |
| AC_VERB_SET_CHANNEL_STREAMID, | |
| oldval); | |
| } | |
| /* | |
| * Turn on/off CrystalVoice | |
| */ | |
| static int ca0132_cvoice_switch_set(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid; | |
| int i, ret = 0; | |
| unsigned int oldval; | |
| codec_dbg(codec, "ca0132_cvoice_switch_set: val=%ld\n", | |
| spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID]); | |
| i = IN_EFFECT_START_NID - EFFECT_START_NID; | |
| nid = IN_EFFECT_START_NID; | |
| /* CrystalVoice affects all in effects */ | |
| for (; nid < IN_EFFECT_END_NID; nid++, i++) | |
| ret |= ca0132_effects_set(codec, nid, spec->effects_switch[i]); | |
| /* including VoiceFX */ | |
| ret |= ca0132_voicefx_set(codec, (spec->voicefx_val ? 1 : 0)); | |
| /* set correct vipsource */ | |
| oldval = stop_mic1(codec); | |
| if (ca0132_use_alt_functions(spec)) | |
| ret |= ca0132_alt_set_vipsource(codec, 1); | |
| else | |
| ret |= ca0132_set_vipsource(codec, 1); | |
| resume_mic1(codec, oldval); | |
| return ret; | |
| } | |
| static int ca0132_mic_boost_set(struct hda_codec *codec, long val) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int ret = 0; | |
| if (val) /* on */ | |
| ret = snd_hda_codec_amp_update(codec, spec->input_pins[0], 0, | |
| HDA_INPUT, 0, HDA_AMP_VOLMASK, 3); | |
| else /* off */ | |
| ret = snd_hda_codec_amp_update(codec, spec->input_pins[0], 0, | |
| HDA_INPUT, 0, HDA_AMP_VOLMASK, 0); | |
| return ret; | |
| } | |
| static int ca0132_alt_mic_boost_set(struct hda_codec *codec, long val) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int ret = 0; | |
| ret = snd_hda_codec_amp_update(codec, spec->input_pins[0], 0, | |
| HDA_INPUT, 0, HDA_AMP_VOLMASK, val); | |
| return ret; | |
| } | |
| static int ae5_headphone_gain_set(struct hda_codec *codec, long val) | |
| { | |
| unsigned int i; | |
| for (i = 0; i < 4; i++) | |
| ca0113_mmio_command_set(codec, 0x48, 0x11 + i, | |
| ae5_headphone_gain_presets[val].vals[i]); | |
| return 0; | |
| } | |
| /* | |
| * gpio pin 1 is a relay that switches on/off, apparently setting the headphone | |
| * amplifier to handle a 600 ohm load. | |
| */ | |
| static int zxr_headphone_gain_set(struct hda_codec *codec, long val) | |
| { | |
| ca0113_mmio_gpio_set(codec, 1, val); | |
| return 0; | |
| } | |
| /* | |
| * Manual output selection (HP/Speaker Playback Switch or alt Output Select) | |
| * is meaningful only when HP/Speaker auto-detect is disabled, since the | |
| * select_out path always prefers jack presence when auto-detect is on. When | |
| * the user explicitly chooses an output, turn auto-detect off so the manual | |
| * choice actually takes effect, and notify userspace so the auto-detect | |
| * control reflects the new state. | |
| */ | |
| static void ca0132_disable_hp_auto_detect(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| struct snd_kcontrol *kctl; | |
| if (!spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID]) | |
| return; | |
| spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID] = 0; | |
| kctl = snd_hda_find_mixer_ctl(codec, | |
| "HP/Speaker Auto Detect Playback Switch"); | |
| if (kctl) | |
| snd_ctl_notify(codec->card, SNDRV_CTL_EVENT_MASK_VALUE, | |
| &kctl->id); | |
| } | |
| static int ca0132_vnode_switch_set(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| hda_nid_t nid = get_amp_nid(kcontrol); | |
| hda_nid_t shared_nid = 0; | |
| bool effective; | |
| int ret = 0; | |
| struct ca0132_spec *spec = codec->spec; | |
| int auto_jack; | |
| if (nid == VNID_HP_SEL) { | |
| ca0132_disable_hp_auto_detect(codec); | |
| if (ca0132_use_alt_functions(spec)) | |
| ca0132_alt_select_out(codec); | |
| else | |
| ca0132_select_out(codec); | |
| return 1; | |
| } | |
| if (nid == VNID_AMIC1_SEL) { | |
| auto_jack = | |
| spec->vnode_lswitch[VNID_AMIC1_ASEL - VNODE_START_NID]; | |
| if (!auto_jack) | |
| ca0132_select_mic(codec); | |
| return 1; | |
| } | |
| if (nid == VNID_HP_ASEL) { | |
| if (ca0132_use_alt_functions(spec)) | |
| ca0132_alt_select_out(codec); | |
| else | |
| ca0132_select_out(codec); | |
| return 1; | |
| } | |
| if (nid == VNID_AMIC1_ASEL) { | |
| ca0132_select_mic(codec); | |
| return 1; | |
| } | |
| /* if effective conditions, then update hw immediately. */ | |
| effective = ca0132_is_vnode_effective(codec, nid, &shared_nid); | |
| if (effective) { | |
| int dir = get_amp_direction(kcontrol); | |
| int ch = get_amp_channels(kcontrol); | |
| unsigned long pval; | |
| guard(mutex)(&codec->control_mutex); | |
| pval = kcontrol->private_value; | |
| kcontrol->private_value = HDA_COMPOSE_AMP_VAL(shared_nid, ch, | |
| 0, dir); | |
| ret = snd_hda_mixer_amp_switch_put(kcontrol, ucontrol); | |
| kcontrol->private_value = pval; | |
| } | |
| return ret; | |
| } | |
| /* End of control change helpers. */ | |
| static void ca0132_alt_bass_redirection_xover_set(struct hda_codec *codec, | |
| long idx) | |
| { | |
| CLASS(snd_hda_power, pm)(codec); | |
| dspio_set_param(codec, 0x96, 0x20, SPEAKER_BASS_REDIRECT_XOVER_FREQ, | |
| &(float_xbass_xover_lookup[idx]), sizeof(unsigned int)); | |
| } | |
| /* | |
| * Below I've added controls to mess with the effect levels, I've only enabled | |
| * them on the Sound Blaster Z, but they would probably also work on the | |
| * Chromebook. I figured they were probably tuned specifically for it, and left | |
| * out for a reason. | |
| */ | |
| /* Sets DSP effect level from the sliders above the controls */ | |
| static int ca0132_alt_slider_ctl_set(struct hda_codec *codec, hda_nid_t nid, | |
| const unsigned int *lookup, int idx) | |
| { | |
| int i = 0; | |
| unsigned int y; | |
| /* | |
| * For X_BASS, req 2 is actually crossover freq instead of | |
| * effect level | |
| */ | |
| if (nid == X_BASS) | |
| y = 2; | |
| else | |
| y = 1; | |
| CLASS(snd_hda_power, pm)(codec); | |
| if (nid == XBASS_XOVER) { | |
| for (i = 0; i < OUT_EFFECTS_COUNT; i++) | |
| if (ca0132_effects[i].nid == X_BASS) | |
| break; | |
| dspio_set_param(codec, ca0132_effects[i].mid, 0x20, | |
| ca0132_effects[i].reqs[1], | |
| &(lookup[idx - 1]), sizeof(unsigned int)); | |
| } else { | |
| /* Find the actual effect structure */ | |
| for (i = 0; i < OUT_EFFECTS_COUNT; i++) | |
| if (nid == ca0132_effects[i].nid) | |
| break; | |
| dspio_set_param(codec, ca0132_effects[i].mid, 0x20, | |
| ca0132_effects[i].reqs[y], | |
| &(lookup[idx]), sizeof(unsigned int)); | |
| } | |
| return 0; | |
| } | |
| static int ca0132_alt_xbass_xover_slider_ctl_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| long *valp = ucontrol->value.integer.value; | |
| hda_nid_t nid = get_amp_nid(kcontrol); | |
| if (nid == BASS_REDIRECTION_XOVER) | |
| *valp = spec->bass_redirect_xover_freq; | |
| else | |
| *valp = spec->xbass_xover_freq; | |
| return 0; | |
| } | |
| static int ca0132_alt_slider_ctl_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid = get_amp_nid(kcontrol); | |
| long *valp = ucontrol->value.integer.value; | |
| int idx = nid - OUT_EFFECT_START_NID; | |
| *valp = spec->fx_ctl_val[idx]; | |
| return 0; | |
| } | |
| /* | |
| * The X-bass crossover starts at 10hz, so the min is 1. The | |
| * frequency is set in multiples of 10. | |
| */ | |
| static int ca0132_alt_xbass_xover_slider_info(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | |
| uinfo->count = 1; | |
| uinfo->value.integer.min = 1; | |
| uinfo->value.integer.max = 100; | |
| uinfo->value.integer.step = 1; | |
| return 0; | |
| } | |
| static int ca0132_alt_effect_slider_info(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| int chs = get_amp_channels(kcontrol); | |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; | |
| uinfo->count = chs == 3 ? 2 : 1; | |
| uinfo->value.integer.min = 0; | |
| uinfo->value.integer.max = 100; | |
| uinfo->value.integer.step = 1; | |
| return 0; | |
| } | |
| static int ca0132_alt_xbass_xover_slider_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid = get_amp_nid(kcontrol); | |
| long *valp = ucontrol->value.integer.value; | |
| long *cur_val; | |
| int idx; | |
| if (nid == BASS_REDIRECTION_XOVER) | |
| cur_val = &spec->bass_redirect_xover_freq; | |
| else | |
| cur_val = &spec->xbass_xover_freq; | |
| /* any change? */ | |
| if (*cur_val == *valp) | |
| return 0; | |
| *cur_val = *valp; | |
| idx = *valp; | |
| if (nid == BASS_REDIRECTION_XOVER) | |
| ca0132_alt_bass_redirection_xover_set(codec, *cur_val); | |
| else | |
| ca0132_alt_slider_ctl_set(codec, nid, float_xbass_xover_lookup, idx); | |
| return 0; | |
| } | |
| static int ca0132_alt_effect_slider_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid = get_amp_nid(kcontrol); | |
| long *valp = ucontrol->value.integer.value; | |
| int idx; | |
| idx = nid - EFFECT_START_NID; | |
| /* any change? */ | |
| if (spec->fx_ctl_val[idx] == *valp) | |
| return 0; | |
| spec->fx_ctl_val[idx] = *valp; | |
| idx = *valp; | |
| ca0132_alt_slider_ctl_set(codec, nid, float_zero_to_one_lookup, idx); | |
| return 0; | |
| } | |
| /* | |
| * Mic Boost Enum for alternative ca0132 codecs. I didn't like that the original | |
| * only has off or full 30 dB, and didn't like making a volume slider that has | |
| * traditional 0-100 in alsamixer that goes in big steps. I like enum better. | |
| */ | |
| #define MIC_BOOST_NUM_OF_STEPS 4 | |
| #define MIC_BOOST_ENUM_MAX_STRLEN 10 | |
| static int ca0132_alt_mic_boost_info(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| const char *sfx = "dB"; | |
| char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; | |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; | |
| uinfo->count = 1; | |
| uinfo->value.enumerated.items = MIC_BOOST_NUM_OF_STEPS; | |
| if (uinfo->value.enumerated.item >= MIC_BOOST_NUM_OF_STEPS) | |
| uinfo->value.enumerated.item = MIC_BOOST_NUM_OF_STEPS - 1; | |
| snprintf(namestr, sizeof(namestr), "%d %s", | |
| (uinfo->value.enumerated.item * 10), sfx); | |
| strscpy(uinfo->value.enumerated.name, namestr); | |
| return 0; | |
| } | |
| static int ca0132_alt_mic_boost_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| ucontrol->value.enumerated.item[0] = spec->mic_boost_enum_val; | |
| return 0; | |
| } | |
| static int ca0132_alt_mic_boost_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| int sel = ucontrol->value.enumerated.item[0]; | |
| unsigned int items = MIC_BOOST_NUM_OF_STEPS; | |
| if (sel >= items) | |
| return 0; | |
| codec_dbg(codec, "ca0132_alt_mic_boost: boost=%d\n", | |
| sel); | |
| spec->mic_boost_enum_val = sel; | |
| if (spec->in_enum_val != REAR_LINE_IN) | |
| ca0132_alt_mic_boost_set(codec, spec->mic_boost_enum_val); | |
| return 1; | |
| } | |
| /* | |
| * Sound BlasterX AE-5 Headphone Gain Controls. | |
| */ | |
| #define AE5_HEADPHONE_GAIN_MAX 3 | |
| static int ae5_headphone_gain_info(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| const char *sfx = " Ohms)"; | |
| char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; | |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; | |
| uinfo->count = 1; | |
| uinfo->value.enumerated.items = AE5_HEADPHONE_GAIN_MAX; | |
| if (uinfo->value.enumerated.item >= AE5_HEADPHONE_GAIN_MAX) | |
| uinfo->value.enumerated.item = AE5_HEADPHONE_GAIN_MAX - 1; | |
| snprintf(namestr, sizeof(namestr), "%s %s", | |
| ae5_headphone_gain_presets[uinfo->value.enumerated.item].name, | |
| sfx); | |
| strscpy(uinfo->value.enumerated.name, namestr); | |
| return 0; | |
| } | |
| static int ae5_headphone_gain_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| ucontrol->value.enumerated.item[0] = spec->ae5_headphone_gain_val; | |
| return 0; | |
| } | |
| static int ae5_headphone_gain_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| int sel = ucontrol->value.enumerated.item[0]; | |
| unsigned int items = AE5_HEADPHONE_GAIN_MAX; | |
| if (sel >= items) | |
| return 0; | |
| codec_dbg(codec, "ae5_headphone_gain: boost=%d\n", | |
| sel); | |
| spec->ae5_headphone_gain_val = sel; | |
| if (spec->out_enum_val == HEADPHONE_OUT) | |
| ae5_headphone_gain_set(codec, spec->ae5_headphone_gain_val); | |
| return 1; | |
| } | |
| /* | |
| * Sound BlasterX AE-5 sound filter enumerated control. | |
| */ | |
| #define AE5_SOUND_FILTER_MAX 3 | |
| static int ae5_sound_filter_info(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; | |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; | |
| uinfo->count = 1; | |
| uinfo->value.enumerated.items = AE5_SOUND_FILTER_MAX; | |
| if (uinfo->value.enumerated.item >= AE5_SOUND_FILTER_MAX) | |
| uinfo->value.enumerated.item = AE5_SOUND_FILTER_MAX - 1; | |
| snprintf(namestr, sizeof(namestr), "%s", | |
| ae5_filter_presets[uinfo->value.enumerated.item].name); | |
| strscpy(uinfo->value.enumerated.name, namestr); | |
| return 0; | |
| } | |
| static int ae5_sound_filter_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| ucontrol->value.enumerated.item[0] = spec->ae5_filter_val; | |
| return 0; | |
| } | |
| static int ae5_sound_filter_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| int sel = ucontrol->value.enumerated.item[0]; | |
| unsigned int items = AE5_SOUND_FILTER_MAX; | |
| if (sel >= items) | |
| return 0; | |
| codec_dbg(codec, "ae5_sound_filter: %s\n", | |
| ae5_filter_presets[sel].name); | |
| spec->ae5_filter_val = sel; | |
| ca0113_mmio_command_set_type2(codec, 0x48, 0x07, | |
| ae5_filter_presets[sel].val); | |
| return 1; | |
| } | |
| /* | |
| * Input Select Control for alternative ca0132 codecs. This exists because | |
| * front microphone has no auto-detect, and we need a way to set the rear | |
| * as line-in | |
| */ | |
| static int ca0132_alt_input_source_info(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; | |
| uinfo->count = 1; | |
| uinfo->value.enumerated.items = IN_SRC_NUM_OF_INPUTS; | |
| if (uinfo->value.enumerated.item >= IN_SRC_NUM_OF_INPUTS) | |
| uinfo->value.enumerated.item = IN_SRC_NUM_OF_INPUTS - 1; | |
| strscpy(uinfo->value.enumerated.name, | |
| in_src_str[uinfo->value.enumerated.item]); | |
| return 0; | |
| } | |
| static int ca0132_alt_input_source_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| ucontrol->value.enumerated.item[0] = spec->in_enum_val; | |
| return 0; | |
| } | |
| static int ca0132_alt_input_source_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| int sel = ucontrol->value.enumerated.item[0]; | |
| unsigned int items = IN_SRC_NUM_OF_INPUTS; | |
| /* | |
| * The AE-7 has no front microphone, so limit items to 2: rear mic and | |
| * line-in. | |
| */ | |
| if (ca0132_quirk(spec) == QUIRK_AE7) | |
| items = 2; | |
| if (sel >= items) | |
| return 0; | |
| codec_dbg(codec, "ca0132_alt_input_select: sel=%d, preset=%s\n", | |
| sel, in_src_str[sel]); | |
| spec->in_enum_val = sel; | |
| ca0132_alt_select_in(codec); | |
| return 1; | |
| } | |
| /* Sound Blaster Z Output Select Control */ | |
| static int ca0132_alt_output_select_get_info(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; | |
| uinfo->count = 1; | |
| uinfo->value.enumerated.items = NUM_OF_OUTPUTS; | |
| if (uinfo->value.enumerated.item >= NUM_OF_OUTPUTS) | |
| uinfo->value.enumerated.item = NUM_OF_OUTPUTS - 1; | |
| strscpy(uinfo->value.enumerated.name, | |
| out_type_str[uinfo->value.enumerated.item]); | |
| return 0; | |
| } | |
| static int ca0132_alt_output_select_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| ucontrol->value.enumerated.item[0] = spec->out_enum_val; | |
| return 0; | |
| } | |
| static int ca0132_alt_output_select_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| int sel = ucontrol->value.enumerated.item[0]; | |
| unsigned int items = NUM_OF_OUTPUTS; | |
| if (sel >= items) | |
| return 0; | |
| codec_dbg(codec, "ca0132_alt_output_select: sel=%d, preset=%s\n", | |
| sel, out_type_str[sel]); | |
| spec->out_enum_val = sel; | |
| ca0132_disable_hp_auto_detect(codec); | |
| ca0132_alt_select_out(codec); | |
| return 1; | |
| } | |
| /* Select surround output type: 2.1, 4.0, 4.1, or 5.1. */ | |
| static int ca0132_alt_speaker_channel_cfg_get_info(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| unsigned int items = SPEAKER_CHANNEL_CFG_COUNT; | |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; | |
| uinfo->count = 1; | |
| uinfo->value.enumerated.items = items; | |
| if (uinfo->value.enumerated.item >= items) | |
| uinfo->value.enumerated.item = items - 1; | |
| strscpy(uinfo->value.enumerated.name, | |
| speaker_channel_cfgs[uinfo->value.enumerated.item].name); | |
| return 0; | |
| } | |
| static int ca0132_alt_speaker_channel_cfg_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| ucontrol->value.enumerated.item[0] = spec->channel_cfg_val; | |
| return 0; | |
| } | |
| static int ca0132_alt_speaker_channel_cfg_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| int sel = ucontrol->value.enumerated.item[0]; | |
| unsigned int items = SPEAKER_CHANNEL_CFG_COUNT; | |
| if (sel >= items) | |
| return 0; | |
| codec_dbg(codec, "ca0132_alt_speaker_channels: sel=%d, channels=%s\n", | |
| sel, speaker_channel_cfgs[sel].name); | |
| spec->channel_cfg_val = sel; | |
| if (spec->out_enum_val == SPEAKER_OUT) | |
| ca0132_alt_select_out(codec); | |
| return 1; | |
| } | |
| /* | |
| * Smart Volume output setting control. Three different settings, Normal, | |
| * which takes the value from the smart volume slider. The two others, loud | |
| * and night, disregard the slider value and have uneditable values. | |
| */ | |
| #define NUM_OF_SVM_SETTINGS 3 | |
| static const char *const out_svm_set_enum_str[3] = {"Normal", "Loud", "Night" }; | |
| static int ca0132_alt_svm_setting_info(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; | |
| uinfo->count = 1; | |
| uinfo->value.enumerated.items = NUM_OF_SVM_SETTINGS; | |
| if (uinfo->value.enumerated.item >= NUM_OF_SVM_SETTINGS) | |
| uinfo->value.enumerated.item = NUM_OF_SVM_SETTINGS - 1; | |
| strscpy(uinfo->value.enumerated.name, | |
| out_svm_set_enum_str[uinfo->value.enumerated.item]); | |
| return 0; | |
| } | |
| static int ca0132_alt_svm_setting_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| ucontrol->value.enumerated.item[0] = spec->smart_volume_setting; | |
| return 0; | |
| } | |
| static int ca0132_alt_svm_setting_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| int sel = ucontrol->value.enumerated.item[0]; | |
| unsigned int items = NUM_OF_SVM_SETTINGS; | |
| unsigned int idx = SMART_VOLUME - EFFECT_START_NID; | |
| unsigned int tmp; | |
| if (sel >= items) | |
| return 0; | |
| codec_dbg(codec, "ca0132_alt_svm_setting: sel=%d, preset=%s\n", | |
| sel, out_svm_set_enum_str[sel]); | |
| spec->smart_volume_setting = sel; | |
| switch (sel) { | |
| case 0: | |
| tmp = FLOAT_ZERO; | |
| break; | |
| case 1: | |
| tmp = FLOAT_ONE; | |
| break; | |
| case 2: | |
| tmp = FLOAT_TWO; | |
| break; | |
| default: | |
| tmp = FLOAT_ZERO; | |
| break; | |
| } | |
| /* Req 2 is the Smart Volume Setting req. */ | |
| dspio_set_uint_param(codec, ca0132_effects[idx].mid, | |
| ca0132_effects[idx].reqs[2], tmp); | |
| return 1; | |
| } | |
| /* Sound Blaster Z EQ preset controls */ | |
| static int ca0132_alt_eq_preset_info(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| unsigned int items = ARRAY_SIZE(ca0132_alt_eq_presets); | |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; | |
| uinfo->count = 1; | |
| uinfo->value.enumerated.items = items; | |
| if (uinfo->value.enumerated.item >= items) | |
| uinfo->value.enumerated.item = items - 1; | |
| strscpy(uinfo->value.enumerated.name, | |
| ca0132_alt_eq_presets[uinfo->value.enumerated.item].name); | |
| return 0; | |
| } | |
| static int ca0132_alt_eq_preset_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| ucontrol->value.enumerated.item[0] = spec->eq_preset_val; | |
| return 0; | |
| } | |
| static int ca0132_alt_eq_preset_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| int i, err = 0; | |
| int sel = ucontrol->value.enumerated.item[0]; | |
| unsigned int items = ARRAY_SIZE(ca0132_alt_eq_presets); | |
| if (sel >= items) | |
| return 0; | |
| codec_dbg(codec, "%s: sel=%d, preset=%s\n", __func__, sel, | |
| ca0132_alt_eq_presets[sel].name); | |
| /* | |
| * Idx 0 is default. | |
| * Default needs to qualify with CrystalVoice state. | |
| */ | |
| for (i = 0; i < EQ_PRESET_MAX_PARAM_COUNT; i++) { | |
| err = dspio_set_uint_param(codec, ca0132_alt_eq_enum.mid, | |
| ca0132_alt_eq_enum.reqs[i], | |
| ca0132_alt_eq_presets[sel].vals[i]); | |
| if (err < 0) | |
| break; | |
| } | |
| if (err >= 0) | |
| spec->eq_preset_val = sel; | |
| return 1; | |
| } | |
| static int ca0132_voicefx_info(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| unsigned int items = ARRAY_SIZE(ca0132_voicefx_presets); | |
| uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; | |
| uinfo->count = 1; | |
| uinfo->value.enumerated.items = items; | |
| if (uinfo->value.enumerated.item >= items) | |
| uinfo->value.enumerated.item = items - 1; | |
| strscpy(uinfo->value.enumerated.name, | |
| ca0132_voicefx_presets[uinfo->value.enumerated.item].name); | |
| return 0; | |
| } | |
| static int ca0132_voicefx_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| ucontrol->value.enumerated.item[0] = spec->voicefx_val; | |
| return 0; | |
| } | |
| static int ca0132_voicefx_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| int i, err = 0; | |
| int sel = ucontrol->value.enumerated.item[0]; | |
| if (sel >= ARRAY_SIZE(ca0132_voicefx_presets)) | |
| return 0; | |
| codec_dbg(codec, "ca0132_voicefx_put: sel=%d, preset=%s\n", | |
| sel, ca0132_voicefx_presets[sel].name); | |
| /* | |
| * Idx 0 is default. | |
| * Default needs to qualify with CrystalVoice state. | |
| */ | |
| for (i = 0; i < VOICEFX_MAX_PARAM_COUNT; i++) { | |
| err = dspio_set_uint_param(codec, ca0132_voicefx.mid, | |
| ca0132_voicefx.reqs[i], | |
| ca0132_voicefx_presets[sel].vals[i]); | |
| if (err < 0) | |
| break; | |
| } | |
| if (err >= 0) { | |
| spec->voicefx_val = sel; | |
| /* enable voice fx */ | |
| ca0132_voicefx_set(codec, (sel ? 1 : 0)); | |
| } | |
| return 1; | |
| } | |
| static int ca0132_switch_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid = get_amp_nid(kcontrol); | |
| int ch = get_amp_channels(kcontrol); | |
| long *valp = ucontrol->value.integer.value; | |
| /* vnode */ | |
| if ((nid >= VNODE_START_NID) && (nid < VNODE_END_NID)) { | |
| if (ch & 1) { | |
| *valp = spec->vnode_lswitch[nid - VNODE_START_NID]; | |
| valp++; | |
| } | |
| if (ch & 2) { | |
| *valp = spec->vnode_rswitch[nid - VNODE_START_NID]; | |
| valp++; | |
| } | |
| return 0; | |
| } | |
| /* effects, include PE and CrystalVoice */ | |
| if ((nid >= EFFECT_START_NID) && (nid < EFFECT_END_NID)) { | |
| *valp = spec->effects_switch[nid - EFFECT_START_NID]; | |
| return 0; | |
| } | |
| /* mic boost */ | |
| if (nid == spec->input_pins[0]) { | |
| *valp = spec->cur_mic_boost; | |
| return 0; | |
| } | |
| if (nid == ZXR_HEADPHONE_GAIN) { | |
| *valp = spec->zxr_gain_set; | |
| return 0; | |
| } | |
| if (nid == SPEAKER_FULL_RANGE_FRONT || nid == SPEAKER_FULL_RANGE_REAR) { | |
| *valp = spec->speaker_range_val[nid - SPEAKER_FULL_RANGE_FRONT]; | |
| return 0; | |
| } | |
| if (nid == BASS_REDIRECTION) { | |
| *valp = spec->bass_redirection_val; | |
| return 0; | |
| } | |
| return 0; | |
| } | |
| static int ca0132_switch_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid = get_amp_nid(kcontrol); | |
| int ch = get_amp_channels(kcontrol); | |
| long *valp = ucontrol->value.integer.value; | |
| codec_dbg(codec, "ca0132_switch_put: nid=0x%x, val=%ld\n", | |
| nid, *valp); | |
| CLASS(snd_hda_power, pm)(codec); | |
| /* vnode */ | |
| if ((nid >= VNODE_START_NID) && (nid < VNODE_END_NID)) { | |
| if (ch & 1) { | |
| spec->vnode_lswitch[nid - VNODE_START_NID] = *valp; | |
| valp++; | |
| } | |
| if (ch & 2) { | |
| spec->vnode_rswitch[nid - VNODE_START_NID] = *valp; | |
| valp++; | |
| } | |
| return ca0132_vnode_switch_set(kcontrol, ucontrol); | |
| } | |
| /* PE */ | |
| if (nid == PLAY_ENHANCEMENT) { | |
| spec->effects_switch[nid - EFFECT_START_NID] = *valp; | |
| return ca0132_pe_switch_set(codec); | |
| } | |
| /* CrystalVoice */ | |
| if (nid == CRYSTAL_VOICE) { | |
| spec->effects_switch[nid - EFFECT_START_NID] = *valp; | |
| return ca0132_cvoice_switch_set(codec); | |
| } | |
| /* out and in effects */ | |
| if (((nid >= OUT_EFFECT_START_NID) && (nid < OUT_EFFECT_END_NID)) || | |
| ((nid >= IN_EFFECT_START_NID) && (nid < IN_EFFECT_END_NID))) { | |
| spec->effects_switch[nid - EFFECT_START_NID] = *valp; | |
| return ca0132_effects_set(codec, nid, *valp); | |
| } | |
| /* mic boost */ | |
| if (nid == spec->input_pins[0]) { | |
| spec->cur_mic_boost = *valp; | |
| if (ca0132_use_alt_functions(spec)) { | |
| if (spec->in_enum_val != REAR_LINE_IN) | |
| return ca0132_mic_boost_set(codec, *valp); | |
| } else { | |
| /* Mic boost does not apply to Digital Mic */ | |
| if (spec->cur_mic_type != DIGITAL_MIC) | |
| return ca0132_mic_boost_set(codec, *valp); | |
| } | |
| return 1; | |
| } | |
| if (nid == ZXR_HEADPHONE_GAIN) { | |
| spec->zxr_gain_set = *valp; | |
| if (spec->cur_out_type == HEADPHONE_OUT) | |
| return zxr_headphone_gain_set(codec, *valp); | |
| else | |
| return 0; | |
| } | |
| if (nid == SPEAKER_FULL_RANGE_FRONT || nid == SPEAKER_FULL_RANGE_REAR) { | |
| spec->speaker_range_val[nid - SPEAKER_FULL_RANGE_FRONT] = *valp; | |
| if (spec->cur_out_type == SPEAKER_OUT) | |
| ca0132_alt_set_full_range_speaker(codec); | |
| return 0; | |
| } | |
| if (nid == BASS_REDIRECTION) { | |
| spec->bass_redirection_val = *valp; | |
| if (spec->cur_out_type == SPEAKER_OUT) | |
| ca0132_alt_surround_set_bass_redirection(codec, *valp); | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| /* | |
| * Volume related | |
| */ | |
| /* | |
| * Sets the internal DSP decibel level to match the DAC for output, and the | |
| * ADC for input. Currently only the SBZ sets dsp capture volume level, and | |
| * all alternative codecs set DSP playback volume. | |
| */ | |
| static void ca0132_alt_dsp_volume_put(struct hda_codec *codec, hda_nid_t nid) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int dsp_dir; | |
| unsigned int lookup_val; | |
| if (nid == VNID_SPK) | |
| dsp_dir = DSP_VOL_OUT; | |
| else | |
| dsp_dir = DSP_VOL_IN; | |
| lookup_val = spec->vnode_lvol[nid - VNODE_START_NID]; | |
| dspio_set_uint_param(codec, | |
| ca0132_alt_vol_ctls[dsp_dir].mid, | |
| ca0132_alt_vol_ctls[dsp_dir].reqs[0], | |
| float_vol_db_lookup[lookup_val]); | |
| lookup_val = spec->vnode_rvol[nid - VNODE_START_NID]; | |
| dspio_set_uint_param(codec, | |
| ca0132_alt_vol_ctls[dsp_dir].mid, | |
| ca0132_alt_vol_ctls[dsp_dir].reqs[1], | |
| float_vol_db_lookup[lookup_val]); | |
| dspio_set_uint_param(codec, | |
| ca0132_alt_vol_ctls[dsp_dir].mid, | |
| ca0132_alt_vol_ctls[dsp_dir].reqs[2], FLOAT_ZERO); | |
| } | |
| static int ca0132_volume_info(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_info *uinfo) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid = get_amp_nid(kcontrol); | |
| int ch = get_amp_channels(kcontrol); | |
| int dir = get_amp_direction(kcontrol); | |
| unsigned long pval; | |
| int err; | |
| switch (nid) { | |
| case VNID_SPK: | |
| /* follow shared_out info */ | |
| nid = spec->shared_out_nid; | |
| scoped_guard(mutex, &codec->control_mutex) { | |
| pval = kcontrol->private_value; | |
| kcontrol->private_value = HDA_COMPOSE_AMP_VAL(nid, ch, 0, dir); | |
| err = snd_hda_mixer_amp_volume_info(kcontrol, uinfo); | |
| kcontrol->private_value = pval; | |
| } | |
| break; | |
| case VNID_MIC: | |
| /* follow shared_mic info */ | |
| nid = spec->shared_mic_nid; | |
| scoped_guard(mutex, &codec->control_mutex) { | |
| pval = kcontrol->private_value; | |
| kcontrol->private_value = HDA_COMPOSE_AMP_VAL(nid, ch, 0, dir); | |
| err = snd_hda_mixer_amp_volume_info(kcontrol, uinfo); | |
| kcontrol->private_value = pval; | |
| } | |
| break; | |
| default: | |
| err = snd_hda_mixer_amp_volume_info(kcontrol, uinfo); | |
| } | |
| return err; | |
| } | |
| static int ca0132_volume_get(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid = get_amp_nid(kcontrol); | |
| int ch = get_amp_channels(kcontrol); | |
| long *valp = ucontrol->value.integer.value; | |
| /* store the left and right volume */ | |
| if (ch & 1) { | |
| *valp = spec->vnode_lvol[nid - VNODE_START_NID]; | |
| valp++; | |
| } | |
| if (ch & 2) { | |
| *valp = spec->vnode_rvol[nid - VNODE_START_NID]; | |
| valp++; | |
| } | |
| return 0; | |
| } | |
| static int ca0132_volume_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid = get_amp_nid(kcontrol); | |
| int ch = get_amp_channels(kcontrol); | |
| long *valp = ucontrol->value.integer.value; | |
| hda_nid_t shared_nid = 0; | |
| bool effective; | |
| int changed = 1; | |
| /* store the left and right volume */ | |
| if (ch & 1) { | |
| spec->vnode_lvol[nid - VNODE_START_NID] = *valp; | |
| valp++; | |
| } | |
| if (ch & 2) { | |
| spec->vnode_rvol[nid - VNODE_START_NID] = *valp; | |
| valp++; | |
| } | |
| /* if effective conditions, then update hw immediately. */ | |
| effective = ca0132_is_vnode_effective(codec, nid, &shared_nid); | |
| if (effective) { | |
| int dir = get_amp_direction(kcontrol); | |
| unsigned long pval; | |
| CLASS(snd_hda_power, pm)(codec); | |
| guard(mutex)(&codec->control_mutex); | |
| pval = kcontrol->private_value; | |
| kcontrol->private_value = HDA_COMPOSE_AMP_VAL(shared_nid, ch, | |
| 0, dir); | |
| changed = snd_hda_mixer_amp_volume_put(kcontrol, ucontrol); | |
| kcontrol->private_value = pval; | |
| } | |
| return changed; | |
| } | |
| /* | |
| * This function is the same as the one above, because using an if statement | |
| * inside of the above volume control for the DSP volume would cause too much | |
| * lag. This is a lot more smooth. | |
| */ | |
| static int ca0132_alt_volume_put(struct snd_kcontrol *kcontrol, | |
| struct snd_ctl_elem_value *ucontrol) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid = get_amp_nid(kcontrol); | |
| int ch = get_amp_channels(kcontrol); | |
| long *valp = ucontrol->value.integer.value; | |
| hda_nid_t vnid = 0; | |
| switch (nid) { | |
| case 0x02: | |
| vnid = VNID_SPK; | |
| break; | |
| case 0x07: | |
| vnid = VNID_MIC; | |
| break; | |
| } | |
| /* store the left and right volume */ | |
| if (ch & 1) { | |
| spec->vnode_lvol[vnid - VNODE_START_NID] = *valp; | |
| valp++; | |
| } | |
| if (ch & 2) { | |
| spec->vnode_rvol[vnid - VNODE_START_NID] = *valp; | |
| valp++; | |
| } | |
| CLASS(snd_hda_power, pm)(codec); | |
| ca0132_alt_dsp_volume_put(codec, vnid); | |
| guard(mutex)(&codec->control_mutex); | |
| return snd_hda_mixer_amp_volume_put(kcontrol, ucontrol); | |
| } | |
| static int ca0132_volume_tlv(struct snd_kcontrol *kcontrol, int op_flag, | |
| unsigned int size, unsigned int __user *tlv) | |
| { | |
| struct hda_codec *codec = snd_kcontrol_chip(kcontrol); | |
| struct ca0132_spec *spec = codec->spec; | |
| hda_nid_t nid = get_amp_nid(kcontrol); | |
| int ch = get_amp_channels(kcontrol); | |
| int dir = get_amp_direction(kcontrol); | |
| unsigned long pval; | |
| int err; | |
| switch (nid) { | |
| case VNID_SPK: | |
| /* follow shared_out tlv */ | |
| nid = spec->shared_out_nid; | |
| scoped_guard(mutex, &codec->control_mutex) { | |
| pval = kcontrol->private_value; | |
| kcontrol->private_value = HDA_COMPOSE_AMP_VAL(nid, ch, 0, dir); | |
| err = snd_hda_mixer_amp_tlv(kcontrol, op_flag, size, tlv); | |
| kcontrol->private_value = pval; | |
| } | |
| break; | |
| case VNID_MIC: | |
| /* follow shared_mic tlv */ | |
| nid = spec->shared_mic_nid; | |
| scoped_guard(mutex, &codec->control_mutex) { | |
| pval = kcontrol->private_value; | |
| kcontrol->private_value = HDA_COMPOSE_AMP_VAL(nid, ch, 0, dir); | |
| err = snd_hda_mixer_amp_tlv(kcontrol, op_flag, size, tlv); | |
| kcontrol->private_value = pval; | |
| } | |
| break; | |
| default: | |
| err = snd_hda_mixer_amp_tlv(kcontrol, op_flag, size, tlv); | |
| } | |
| return err; | |
| } | |
| /* Add volume slider control for effect level */ | |
| static int ca0132_alt_add_effect_slider(struct hda_codec *codec, hda_nid_t nid, | |
| const char *pfx, int dir) | |
| { | |
| char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; | |
| int type = dir ? HDA_INPUT : HDA_OUTPUT; | |
| struct snd_kcontrol_new knew = | |
| HDA_CODEC_VOLUME_MONO(namestr, nid, 1, 0, type); | |
| snprintf(namestr, sizeof(namestr), "FX: %s %s Volume", pfx, dirstr[dir]); | |
| knew.tlv.c = NULL; | |
| switch (nid) { | |
| case XBASS_XOVER: | |
| knew.info = ca0132_alt_xbass_xover_slider_info; | |
| knew.get = ca0132_alt_xbass_xover_slider_ctl_get; | |
| knew.put = ca0132_alt_xbass_xover_slider_put; | |
| break; | |
| default: | |
| knew.info = ca0132_alt_effect_slider_info; | |
| knew.get = ca0132_alt_slider_ctl_get; | |
| knew.put = ca0132_alt_effect_slider_put; | |
| knew.private_value = | |
| HDA_COMPOSE_AMP_VAL(nid, 1, 0, type); | |
| break; | |
| } | |
| return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec)); | |
| } | |
| /* | |
| * Added FX: prefix for the alternative codecs, because otherwise the surround | |
| * effect would conflict with the Surround sound volume control. Also seems more | |
| * clear as to what the switches do. Left alone for others. | |
| */ | |
| static int add_fx_switch(struct hda_codec *codec, hda_nid_t nid, | |
| const char *pfx, int dir) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| char namestr[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; | |
| int type = dir ? HDA_INPUT : HDA_OUTPUT; | |
| struct snd_kcontrol_new knew = | |
| CA0132_CODEC_MUTE_MONO(namestr, nid, 1, type); | |
| /* If using alt_controls, add FX: prefix. But, don't add FX: | |
| * prefix to OutFX or InFX enable controls. | |
| */ | |
| if (ca0132_use_alt_controls(spec) && (nid <= IN_EFFECT_END_NID)) | |
| snprintf(namestr, sizeof(namestr), "FX: %s %s Switch", pfx, dirstr[dir]); | |
| else | |
| snprintf(namestr, sizeof(namestr), "%s %s Switch", pfx, dirstr[dir]); | |
| return snd_hda_ctl_add(codec, nid, snd_ctl_new1(&knew, codec)); | |
| } | |
| static int add_voicefx(struct hda_codec *codec) | |
| { | |
| struct snd_kcontrol_new knew = | |
| HDA_CODEC_MUTE_MONO(ca0132_voicefx.name, | |
| VOICEFX, 1, 0, HDA_INPUT); | |
| knew.info = ca0132_voicefx_info; | |
| knew.get = ca0132_voicefx_get; | |
| knew.put = ca0132_voicefx_put; | |
| return snd_hda_ctl_add(codec, VOICEFX, snd_ctl_new1(&knew, codec)); | |
| } | |
| /* Create the EQ Preset control */ | |
| static int add_ca0132_alt_eq_presets(struct hda_codec *codec) | |
| { | |
| struct snd_kcontrol_new knew = | |
| HDA_CODEC_MUTE_MONO(ca0132_alt_eq_enum.name, | |
| EQ_PRESET_ENUM, 1, 0, HDA_OUTPUT); | |
| knew.info = ca0132_alt_eq_preset_info; | |
| knew.get = ca0132_alt_eq_preset_get; | |
| knew.put = ca0132_alt_eq_preset_put; | |
| return snd_hda_ctl_add(codec, EQ_PRESET_ENUM, | |
| snd_ctl_new1(&knew, codec)); | |
| } | |
| /* | |
| * Add enumerated control for the three different settings of the smart volume | |
| * output effect. Normal just uses the slider value, and loud and night are | |
| * their own things that ignore that value. | |
| */ | |
| static int ca0132_alt_add_svm_enum(struct hda_codec *codec) | |
| { | |
| struct snd_kcontrol_new knew = | |
| HDA_CODEC_MUTE_MONO("FX: Smart Volume Setting", | |
| SMART_VOLUME_ENUM, 1, 0, HDA_OUTPUT); | |
| knew.info = ca0132_alt_svm_setting_info; | |
| knew.get = ca0132_alt_svm_setting_get; | |
| knew.put = ca0132_alt_svm_setting_put; | |
| return snd_hda_ctl_add(codec, SMART_VOLUME_ENUM, | |
| snd_ctl_new1(&knew, codec)); | |
| } | |
| /* | |
| * Create an Output Select enumerated control for codecs with surround | |
| * out capabilities. | |
| */ | |
| static int ca0132_alt_add_output_enum(struct hda_codec *codec) | |
| { | |
| struct snd_kcontrol_new knew = | |
| HDA_CODEC_MUTE_MONO("Output Select", | |
| OUTPUT_SOURCE_ENUM, 1, 0, HDA_OUTPUT); | |
| knew.info = ca0132_alt_output_select_get_info; | |
| knew.get = ca0132_alt_output_select_get; | |
| knew.put = ca0132_alt_output_select_put; | |
| return snd_hda_ctl_add(codec, OUTPUT_SOURCE_ENUM, | |
| snd_ctl_new1(&knew, codec)); | |
| } | |
| /* | |
| * Add a control for selecting channel count on speaker output. Setting this | |
| * allows the DSP to do bass redirection and channel upmixing on surround | |
| * configurations. | |
| */ | |
| static int ca0132_alt_add_speaker_channel_cfg_enum(struct hda_codec *codec) | |
| { | |
| struct snd_kcontrol_new knew = | |
| HDA_CODEC_MUTE_MONO("Surround Channel Config", | |
| SPEAKER_CHANNEL_CFG_ENUM, 1, 0, HDA_OUTPUT); | |
| knew.info = ca0132_alt_speaker_channel_cfg_get_info; | |
| knew.get = ca0132_alt_speaker_channel_cfg_get; | |
| knew.put = ca0132_alt_speaker_channel_cfg_put; | |
| return snd_hda_ctl_add(codec, SPEAKER_CHANNEL_CFG_ENUM, | |
| snd_ctl_new1(&knew, codec)); | |
| } | |
| /* | |
| * Full range front stereo and rear surround switches. When these are set to | |
| * full range, the lower frequencies from these channels are no longer | |
| * redirected to the LFE channel. | |
| */ | |
| static int ca0132_alt_add_front_full_range_switch(struct hda_codec *codec) | |
| { | |
| struct snd_kcontrol_new knew = | |
| CA0132_CODEC_MUTE_MONO("Full-Range Front Speakers", | |
| SPEAKER_FULL_RANGE_FRONT, 1, HDA_OUTPUT); | |
| return snd_hda_ctl_add(codec, SPEAKER_FULL_RANGE_FRONT, | |
| snd_ctl_new1(&knew, codec)); | |
| } | |
| static int ca0132_alt_add_rear_full_range_switch(struct hda_codec *codec) | |
| { | |
| struct snd_kcontrol_new knew = | |
| CA0132_CODEC_MUTE_MONO("Full-Range Rear Speakers", | |
| SPEAKER_FULL_RANGE_REAR, 1, HDA_OUTPUT); | |
| return snd_hda_ctl_add(codec, SPEAKER_FULL_RANGE_REAR, | |
| snd_ctl_new1(&knew, codec)); | |
| } | |
| /* | |
| * Bass redirection redirects audio below the crossover frequency to the LFE | |
| * channel on speakers that are set as not being full-range. On configurations | |
| * without an LFE channel, it does nothing. Bass redirection seems to be the | |
| * replacement for X-Bass on configurations with an LFE channel. | |
| */ | |
| static int ca0132_alt_add_bass_redirection_crossover(struct hda_codec *codec) | |
| { | |
| const char *namestr = "Bass Redirection Crossover"; | |
| struct snd_kcontrol_new knew = | |
| HDA_CODEC_VOLUME_MONO(namestr, BASS_REDIRECTION_XOVER, 1, 0, | |
| HDA_OUTPUT); | |
| knew.tlv.c = NULL; | |
| knew.info = ca0132_alt_xbass_xover_slider_info; | |
| knew.get = ca0132_alt_xbass_xover_slider_ctl_get; | |
| knew.put = ca0132_alt_xbass_xover_slider_put; | |
| return snd_hda_ctl_add(codec, BASS_REDIRECTION_XOVER, | |
| snd_ctl_new1(&knew, codec)); | |
| } | |
| static int ca0132_alt_add_bass_redirection_switch(struct hda_codec *codec) | |
| { | |
| const char *namestr = "Bass Redirection"; | |
| struct snd_kcontrol_new knew = | |
| CA0132_CODEC_MUTE_MONO(namestr, BASS_REDIRECTION, 1, | |
| HDA_OUTPUT); | |
| return snd_hda_ctl_add(codec, BASS_REDIRECTION, | |
| snd_ctl_new1(&knew, codec)); | |
| } | |
| /* | |
| * Create an Input Source enumerated control for the alternate ca0132 codecs | |
| * because the front microphone has no auto-detect, and Line-in has to be set | |
| * somehow. | |
| */ | |
| static int ca0132_alt_add_input_enum(struct hda_codec *codec) | |
| { | |
| struct snd_kcontrol_new knew = | |
| HDA_CODEC_MUTE_MONO("Input Source", | |
| INPUT_SOURCE_ENUM, 1, 0, HDA_INPUT); | |
| knew.info = ca0132_alt_input_source_info; | |
| knew.get = ca0132_alt_input_source_get; | |
| knew.put = ca0132_alt_input_source_put; | |
| return snd_hda_ctl_add(codec, INPUT_SOURCE_ENUM, | |
| snd_ctl_new1(&knew, codec)); | |
| } | |
| /* | |
| * Add mic boost enumerated control. Switches through 0dB to 30dB. This adds | |
| * more control than the original mic boost, which is either full 30dB or off. | |
| */ | |
| static int ca0132_alt_add_mic_boost_enum(struct hda_codec *codec) | |
| { | |
| struct snd_kcontrol_new knew = | |
| HDA_CODEC_MUTE_MONO("Mic Boost Capture Switch", | |
| MIC_BOOST_ENUM, 1, 0, HDA_INPUT); | |
| knew.info = ca0132_alt_mic_boost_info; | |
| knew.get = ca0132_alt_mic_boost_get; | |
| knew.put = ca0132_alt_mic_boost_put; | |
| return snd_hda_ctl_add(codec, MIC_BOOST_ENUM, | |
| snd_ctl_new1(&knew, codec)); | |
| } | |
| /* | |
| * Add headphone gain enumerated control for the AE-5. This switches between | |
| * three modes, low, medium, and high. When non-headphone outputs are selected, | |
| * it is automatically set to high. This is the same behavior as Windows. | |
| */ | |
| static int ae5_add_headphone_gain_enum(struct hda_codec *codec) | |
| { | |
| struct snd_kcontrol_new knew = | |
| HDA_CODEC_MUTE_MONO("AE-5: Headphone Gain", | |
| AE5_HEADPHONE_GAIN_ENUM, 1, 0, HDA_OUTPUT); | |
| knew.info = ae5_headphone_gain_info; | |
| knew.get = ae5_headphone_gain_get; | |
| knew.put = ae5_headphone_gain_put; | |
| return snd_hda_ctl_add(codec, AE5_HEADPHONE_GAIN_ENUM, | |
| snd_ctl_new1(&knew, codec)); | |
| } | |
| /* | |
| * Add sound filter enumerated control for the AE-5. This adds three different | |
| * settings: Slow Roll Off, Minimum Phase, and Fast Roll Off. From what I've | |
| * read into it, it changes the DAC's interpolation filter. | |
| */ | |
| static int ae5_add_sound_filter_enum(struct hda_codec *codec) | |
| { | |
| struct snd_kcontrol_new knew = | |
| HDA_CODEC_MUTE_MONO("AE-5: Sound Filter", | |
| AE5_SOUND_FILTER_ENUM, 1, 0, HDA_OUTPUT); | |
| knew.info = ae5_sound_filter_info; | |
| knew.get = ae5_sound_filter_get; | |
| knew.put = ae5_sound_filter_put; | |
| return snd_hda_ctl_add(codec, AE5_SOUND_FILTER_ENUM, | |
| snd_ctl_new1(&knew, codec)); | |
| } | |
| static int zxr_add_headphone_gain_switch(struct hda_codec *codec) | |
| { | |
| struct snd_kcontrol_new knew = | |
| CA0132_CODEC_MUTE_MONO("ZxR: 600 Ohm Gain", | |
| ZXR_HEADPHONE_GAIN, 1, HDA_OUTPUT); | |
| return snd_hda_ctl_add(codec, ZXR_HEADPHONE_GAIN, | |
| snd_ctl_new1(&knew, codec)); | |
| } | |
| /* | |
| * Need to create follower controls for the alternate codecs that have surround | |
| * capabilities. | |
| */ | |
| static const char * const ca0132_alt_follower_pfxs[] = { | |
| "Front", "Surround", "Center", "LFE", NULL, | |
| }; | |
| /* | |
| * Also need special channel map, because the default one is incorrect. | |
| * I think this has to do with the pin for rear surround being 0x11, | |
| * and the center/lfe being 0x10. Usually the pin order is the opposite. | |
| */ | |
| static const struct snd_pcm_chmap_elem ca0132_alt_chmaps[] = { | |
| { .channels = 2, | |
| .map = { SNDRV_CHMAP_FL, SNDRV_CHMAP_FR } }, | |
| { .channels = 4, | |
| .map = { SNDRV_CHMAP_FL, SNDRV_CHMAP_FR, | |
| SNDRV_CHMAP_RL, SNDRV_CHMAP_RR } }, | |
| { .channels = 6, | |
| .map = { SNDRV_CHMAP_FL, SNDRV_CHMAP_FR, | |
| SNDRV_CHMAP_FC, SNDRV_CHMAP_LFE, | |
| SNDRV_CHMAP_RL, SNDRV_CHMAP_RR } }, | |
| { } | |
| }; | |
| /* Add the correct chmap for streams with 6 channels. */ | |
| static void ca0132_alt_add_chmap_ctls(struct hda_codec *codec) | |
| { | |
| int err = 0; | |
| struct hda_pcm *pcm; | |
| list_for_each_entry(pcm, &codec->pcm_list_head, list) { | |
| struct hda_pcm_stream *hinfo = | |
| &pcm->stream[SNDRV_PCM_STREAM_PLAYBACK]; | |
| struct snd_pcm_chmap *chmap; | |
| const struct snd_pcm_chmap_elem *elem; | |
| elem = ca0132_alt_chmaps; | |
| if (hinfo->channels_max == 6) { | |
| err = snd_pcm_add_chmap_ctls(pcm->pcm, | |
| SNDRV_PCM_STREAM_PLAYBACK, | |
| elem, hinfo->channels_max, 0, &chmap); | |
| if (err < 0) | |
| codec_dbg(codec, "snd_pcm_add_chmap_ctls failed!"); | |
| } | |
| } | |
| } | |
| /* | |
| * When changing Node IDs for Mixer Controls below, make sure to update | |
| * Node IDs in ca0132_config() as well. | |
| */ | |
| static const struct snd_kcontrol_new ca0132_mixer[] = { | |
| CA0132_CODEC_VOL("Master Playback Volume", VNID_SPK, HDA_OUTPUT), | |
| CA0132_CODEC_MUTE("Master Playback Switch", VNID_SPK, HDA_OUTPUT), | |
| CA0132_CODEC_VOL("Capture Volume", VNID_MIC, HDA_INPUT), | |
| CA0132_CODEC_MUTE("Capture Switch", VNID_MIC, HDA_INPUT), | |
| HDA_CODEC_VOLUME("Analog-Mic2 Capture Volume", 0x08, 0, HDA_INPUT), | |
| HDA_CODEC_MUTE("Analog-Mic2 Capture Switch", 0x08, 0, HDA_INPUT), | |
| HDA_CODEC_VOLUME("What U Hear Capture Volume", 0x0a, 0, HDA_INPUT), | |
| HDA_CODEC_MUTE("What U Hear Capture Switch", 0x0a, 0, HDA_INPUT), | |
| CA0132_CODEC_MUTE_MONO("Mic1-Boost (30dB) Capture Switch", | |
| 0x12, 1, HDA_INPUT), | |
| CA0132_CODEC_MUTE_MONO("HP/Speaker Playback Switch", | |
| VNID_HP_SEL, 1, HDA_OUTPUT), | |
| CA0132_CODEC_MUTE_MONO("AMic1/DMic Capture Switch", | |
| VNID_AMIC1_SEL, 1, HDA_INPUT), | |
| CA0132_CODEC_MUTE_MONO("HP/Speaker Auto Detect Playback Switch", | |
| VNID_HP_ASEL, 1, HDA_OUTPUT), | |
| CA0132_CODEC_MUTE_MONO("AMic1/DMic Auto Detect Capture Switch", | |
| VNID_AMIC1_ASEL, 1, HDA_INPUT), | |
| { } /* end */ | |
| }; | |
| /* | |
| * Desktop specific control mixer. Removes auto-detect for mic, and adds | |
| * surround controls. Also sets both the Front Playback and Capture Volume | |
| * controls to alt so they set the DSP's decibel level. | |
| */ | |
| static const struct snd_kcontrol_new desktop_mixer[] = { | |
| CA0132_ALT_CODEC_VOL("Front Playback Volume", 0x02, HDA_OUTPUT), | |
| CA0132_CODEC_MUTE("Front Playback Switch", VNID_SPK, HDA_OUTPUT), | |
| HDA_CODEC_VOLUME("Surround Playback Volume", 0x04, 0, HDA_OUTPUT), | |
| HDA_CODEC_MUTE("Surround Playback Switch", 0x04, 0, HDA_OUTPUT), | |
| HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x03, 1, 0, HDA_OUTPUT), | |
| HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x03, 1, 0, HDA_OUTPUT), | |
| HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x03, 2, 0, HDA_OUTPUT), | |
| HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x03, 2, 0, HDA_OUTPUT), | |
| CA0132_ALT_CODEC_VOL("Capture Volume", 0x07, HDA_INPUT), | |
| CA0132_CODEC_MUTE("Capture Switch", VNID_MIC, HDA_INPUT), | |
| HDA_CODEC_VOLUME("What U Hear Capture Volume", 0x0a, 0, HDA_INPUT), | |
| HDA_CODEC_MUTE("What U Hear Capture Switch", 0x0a, 0, HDA_INPUT), | |
| CA0132_CODEC_MUTE_MONO("HP/Speaker Auto Detect Playback Switch", | |
| VNID_HP_ASEL, 1, HDA_OUTPUT), | |
| { } /* end */ | |
| }; | |
| /* | |
| * Same as the Sound Blaster Z, except doesn't use the alt volume for capture | |
| * because it doesn't set decibel levels for the DSP for capture. | |
| */ | |
| static const struct snd_kcontrol_new r3di_mixer[] = { | |
| CA0132_ALT_CODEC_VOL("Front Playback Volume", 0x02, HDA_OUTPUT), | |
| CA0132_CODEC_MUTE("Front Playback Switch", VNID_SPK, HDA_OUTPUT), | |
| HDA_CODEC_VOLUME("Surround Playback Volume", 0x04, 0, HDA_OUTPUT), | |
| HDA_CODEC_MUTE("Surround Playback Switch", 0x04, 0, HDA_OUTPUT), | |
| HDA_CODEC_VOLUME_MONO("Center Playback Volume", 0x03, 1, 0, HDA_OUTPUT), | |
| HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x03, 1, 0, HDA_OUTPUT), | |
| HDA_CODEC_VOLUME_MONO("LFE Playback Volume", 0x03, 2, 0, HDA_OUTPUT), | |
| HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x03, 2, 0, HDA_OUTPUT), | |
| CA0132_CODEC_VOL("Capture Volume", VNID_MIC, HDA_INPUT), | |
| CA0132_CODEC_MUTE("Capture Switch", VNID_MIC, HDA_INPUT), | |
| HDA_CODEC_VOLUME("What U Hear Capture Volume", 0x0a, 0, HDA_INPUT), | |
| HDA_CODEC_MUTE("What U Hear Capture Switch", 0x0a, 0, HDA_INPUT), | |
| CA0132_CODEC_MUTE_MONO("HP/Speaker Auto Detect Playback Switch", | |
| VNID_HP_ASEL, 1, HDA_OUTPUT), | |
| { } /* end */ | |
| }; | |
| static int ca0132_build_controls(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int i, num_fx, num_sliders; | |
| int err = 0; | |
| /* Add Mixer controls */ | |
| for (i = 0; i < spec->num_mixers; i++) { | |
| err = snd_hda_add_new_ctls(codec, spec->mixers[i]); | |
| if (err < 0) | |
| return err; | |
| } | |
| /* Setup vmaster with surround followers for desktop ca0132 devices */ | |
| if (ca0132_use_alt_functions(spec)) { | |
| snd_hda_set_vmaster_tlv(codec, spec->dacs[0], HDA_OUTPUT, | |
| spec->tlv); | |
| snd_hda_add_vmaster(codec, "Master Playback Volume", | |
| spec->tlv, ca0132_alt_follower_pfxs, | |
| "Playback Volume", 0); | |
| err = __snd_hda_add_vmaster(codec, "Master Playback Switch", | |
| NULL, ca0132_alt_follower_pfxs, | |
| "Playback Switch", | |
| true, 0, &spec->vmaster_mute.sw_kctl); | |
| if (err < 0) | |
| return err; | |
| } | |
| /* Add in and out effects controls. | |
| * VoiceFX, PE and CrystalVoice are added separately. | |
| */ | |
| num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT; | |
| for (i = 0; i < num_fx; i++) { | |
| /* Desktop cards break if Echo Cancellation is used. */ | |
| if (ca0132_use_pci_mmio(spec)) { | |
| if (i == (ECHO_CANCELLATION - IN_EFFECT_START_NID + | |
| OUT_EFFECTS_COUNT)) | |
| continue; | |
| } | |
| err = add_fx_switch(codec, ca0132_effects[i].nid, | |
| ca0132_effects[i].name, | |
| ca0132_effects[i].direct); | |
| if (err < 0) | |
| return err; | |
| } | |
| /* | |
| * If codec has use_alt_controls set to true, add effect level sliders, | |
| * EQ presets, and Smart Volume presets. Also, change names to add FX | |
| * prefix, and change PlayEnhancement and CrystalVoice to match. | |
| */ | |
| if (ca0132_use_alt_controls(spec)) { | |
| err = ca0132_alt_add_svm_enum(codec); | |
| if (err < 0) | |
| return err; | |
| err = add_ca0132_alt_eq_presets(codec); | |
| if (err < 0) | |
| return err; | |
| err = add_fx_switch(codec, PLAY_ENHANCEMENT, | |
| "Enable OutFX", 0); | |
| if (err < 0) | |
| return err; | |
| err = add_fx_switch(codec, CRYSTAL_VOICE, | |
| "Enable InFX", 1); | |
| if (err < 0) | |
| return err; | |
| num_sliders = OUT_EFFECTS_COUNT - 1; | |
| for (i = 0; i < num_sliders; i++) { | |
| err = ca0132_alt_add_effect_slider(codec, | |
| ca0132_effects[i].nid, | |
| ca0132_effects[i].name, | |
| ca0132_effects[i].direct); | |
| if (err < 0) | |
| return err; | |
| } | |
| err = ca0132_alt_add_effect_slider(codec, XBASS_XOVER, | |
| "X-Bass Crossover", EFX_DIR_OUT); | |
| if (err < 0) | |
| return err; | |
| } else { | |
| err = add_fx_switch(codec, PLAY_ENHANCEMENT, | |
| "PlayEnhancement", 0); | |
| if (err < 0) | |
| return err; | |
| err = add_fx_switch(codec, CRYSTAL_VOICE, | |
| "CrystalVoice", 1); | |
| if (err < 0) | |
| return err; | |
| } | |
| err = add_voicefx(codec); | |
| if (err < 0) | |
| return err; | |
| /* | |
| * If the codec uses alt_functions, you need the enumerated controls | |
| * to select the new outputs and inputs, plus add the new mic boost | |
| * setting control. | |
| */ | |
| if (ca0132_use_alt_functions(spec)) { | |
| err = ca0132_alt_add_output_enum(codec); | |
| if (err < 0) | |
| return err; | |
| err = ca0132_alt_add_speaker_channel_cfg_enum(codec); | |
| if (err < 0) | |
| return err; | |
| err = ca0132_alt_add_front_full_range_switch(codec); | |
| if (err < 0) | |
| return err; | |
| err = ca0132_alt_add_rear_full_range_switch(codec); | |
| if (err < 0) | |
| return err; | |
| err = ca0132_alt_add_bass_redirection_crossover(codec); | |
| if (err < 0) | |
| return err; | |
| err = ca0132_alt_add_bass_redirection_switch(codec); | |
| if (err < 0) | |
| return err; | |
| err = ca0132_alt_add_mic_boost_enum(codec); | |
| if (err < 0) | |
| return err; | |
| /* | |
| * ZxR only has microphone input, there is no front panel | |
| * header on the card, and aux-in is handled by the DBPro board. | |
| */ | |
| if (ca0132_quirk(spec) != QUIRK_ZXR) { | |
| err = ca0132_alt_add_input_enum(codec); | |
| if (err < 0) | |
| return err; | |
| } | |
| } | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_AE5: | |
| case QUIRK_AE7: | |
| err = ae5_add_headphone_gain_enum(codec); | |
| if (err < 0) | |
| return err; | |
| err = ae5_add_sound_filter_enum(codec); | |
| if (err < 0) | |
| return err; | |
| break; | |
| case QUIRK_ZXR: | |
| err = zxr_add_headphone_gain_switch(codec); | |
| if (err < 0) | |
| return err; | |
| break; | |
| default: | |
| break; | |
| } | |
| #ifdef ENABLE_TUNING_CONTROLS | |
| add_tuning_ctls(codec); | |
| #endif | |
| err = snd_hda_jack_add_kctls(codec, &spec->autocfg); | |
| if (err < 0) | |
| return err; | |
| if (spec->dig_out) { | |
| err = snd_hda_create_spdif_out_ctls(codec, spec->dig_out, | |
| spec->dig_out); | |
| if (err < 0) | |
| return err; | |
| err = snd_hda_create_spdif_share_sw(codec, &spec->multiout); | |
| if (err < 0) | |
| return err; | |
| /* spec->multiout.share_spdif = 1; */ | |
| } | |
| if (spec->dig_in) { | |
| err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in); | |
| if (err < 0) | |
| return err; | |
| } | |
| if (ca0132_use_alt_functions(spec)) | |
| ca0132_alt_add_chmap_ctls(codec); | |
| return 0; | |
| } | |
| static int dbpro_build_controls(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int err = 0; | |
| if (spec->dig_out) { | |
| err = snd_hda_create_spdif_out_ctls(codec, spec->dig_out, | |
| spec->dig_out); | |
| if (err < 0) | |
| return err; | |
| } | |
| if (spec->dig_in) { | |
| err = snd_hda_create_spdif_in_ctls(codec, spec->dig_in); | |
| if (err < 0) | |
| return err; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * PCM | |
| */ | |
| static const struct hda_pcm_stream ca0132_pcm_analog_playback = { | |
| .substreams = 1, | |
| .channels_min = 2, | |
| .channels_max = 6, | |
| .ops = { | |
| .prepare = ca0132_playback_pcm_prepare, | |
| .cleanup = ca0132_playback_pcm_cleanup, | |
| .get_delay = ca0132_playback_pcm_delay, | |
| }, | |
| }; | |
| static const struct hda_pcm_stream ca0132_pcm_analog_capture = { | |
| .substreams = 1, | |
| .channels_min = 2, | |
| .channels_max = 2, | |
| .ops = { | |
| .prepare = ca0132_capture_pcm_prepare, | |
| .cleanup = ca0132_capture_pcm_cleanup, | |
| .get_delay = ca0132_capture_pcm_delay, | |
| }, | |
| }; | |
| static const struct hda_pcm_stream ca0132_pcm_digital_playback = { | |
| .substreams = 1, | |
| .channels_min = 2, | |
| .channels_max = 2, | |
| .ops = { | |
| .open = ca0132_dig_playback_pcm_open, | |
| .close = ca0132_dig_playback_pcm_close, | |
| .prepare = ca0132_dig_playback_pcm_prepare, | |
| .cleanup = ca0132_dig_playback_pcm_cleanup | |
| }, | |
| }; | |
| static const struct hda_pcm_stream ca0132_pcm_digital_capture = { | |
| .substreams = 1, | |
| .channels_min = 2, | |
| .channels_max = 2, | |
| }; | |
| static int ca0132_build_pcms(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| struct hda_pcm *info; | |
| info = snd_hda_codec_pcm_new(codec, "CA0132 Analog"); | |
| if (!info) | |
| return -ENOMEM; | |
| if (ca0132_use_alt_functions(spec)) { | |
| info->own_chmap = true; | |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK].chmap | |
| = ca0132_alt_chmaps; | |
| } | |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK] = ca0132_pcm_analog_playback; | |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dacs[0]; | |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK].channels_max = | |
| spec->multiout.max_channels; | |
| info->stream[SNDRV_PCM_STREAM_CAPTURE] = ca0132_pcm_analog_capture; | |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = 1; | |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[0]; | |
| /* With the DSP enabled, desktops don't use this ADC. */ | |
| if (!ca0132_use_alt_functions(spec)) { | |
| info = snd_hda_codec_pcm_new(codec, "CA0132 Analog Mic-In2"); | |
| if (!info) | |
| return -ENOMEM; | |
| info->stream[SNDRV_PCM_STREAM_CAPTURE] = | |
| ca0132_pcm_analog_capture; | |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = 1; | |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[1]; | |
| } | |
| info = snd_hda_codec_pcm_new(codec, "CA0132 What U Hear"); | |
| if (!info) | |
| return -ENOMEM; | |
| info->stream[SNDRV_PCM_STREAM_CAPTURE] = ca0132_pcm_analog_capture; | |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = 1; | |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[2]; | |
| if (!spec->dig_out && !spec->dig_in) | |
| return 0; | |
| info = snd_hda_codec_pcm_new(codec, "CA0132 Digital"); | |
| if (!info) | |
| return -ENOMEM; | |
| info->pcm_type = HDA_PCM_TYPE_SPDIF; | |
| if (spec->dig_out) { | |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK] = | |
| ca0132_pcm_digital_playback; | |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dig_out; | |
| } | |
| if (spec->dig_in) { | |
| info->stream[SNDRV_PCM_STREAM_CAPTURE] = | |
| ca0132_pcm_digital_capture; | |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in; | |
| } | |
| return 0; | |
| } | |
| static int dbpro_build_pcms(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| struct hda_pcm *info; | |
| info = snd_hda_codec_pcm_new(codec, "CA0132 Alt Analog"); | |
| if (!info) | |
| return -ENOMEM; | |
| info->stream[SNDRV_PCM_STREAM_CAPTURE] = ca0132_pcm_analog_capture; | |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].substreams = 1; | |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->adcs[0]; | |
| if (!spec->dig_out && !spec->dig_in) | |
| return 0; | |
| info = snd_hda_codec_pcm_new(codec, "CA0132 Digital"); | |
| if (!info) | |
| return -ENOMEM; | |
| info->pcm_type = HDA_PCM_TYPE_SPDIF; | |
| if (spec->dig_out) { | |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK] = | |
| ca0132_pcm_digital_playback; | |
| info->stream[SNDRV_PCM_STREAM_PLAYBACK].nid = spec->dig_out; | |
| } | |
| if (spec->dig_in) { | |
| info->stream[SNDRV_PCM_STREAM_CAPTURE] = | |
| ca0132_pcm_digital_capture; | |
| info->stream[SNDRV_PCM_STREAM_CAPTURE].nid = spec->dig_in; | |
| } | |
| return 0; | |
| } | |
| static void init_output(struct hda_codec *codec, hda_nid_t pin, hda_nid_t dac) | |
| { | |
| if (pin) { | |
| snd_hda_set_pin_ctl(codec, pin, PIN_HP); | |
| if (get_wcaps(codec, pin) & AC_WCAP_OUT_AMP) | |
| snd_hda_codec_write(codec, pin, 0, | |
| AC_VERB_SET_AMP_GAIN_MUTE, | |
| AMP_OUT_UNMUTE); | |
| } | |
| if (dac && (get_wcaps(codec, dac) & AC_WCAP_OUT_AMP)) | |
| snd_hda_codec_write(codec, dac, 0, | |
| AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO); | |
| } | |
| static void init_input(struct hda_codec *codec, hda_nid_t pin, hda_nid_t adc) | |
| { | |
| if (pin) { | |
| snd_hda_set_pin_ctl(codec, pin, PIN_VREF80); | |
| if (get_wcaps(codec, pin) & AC_WCAP_IN_AMP) | |
| snd_hda_codec_write(codec, pin, 0, | |
| AC_VERB_SET_AMP_GAIN_MUTE, | |
| AMP_IN_UNMUTE(0)); | |
| } | |
| if (adc && (get_wcaps(codec, adc) & AC_WCAP_IN_AMP)) { | |
| snd_hda_codec_write(codec, adc, 0, AC_VERB_SET_AMP_GAIN_MUTE, | |
| AMP_IN_UNMUTE(0)); | |
| /* init to 0 dB and unmute. */ | |
| snd_hda_codec_amp_stereo(codec, adc, HDA_INPUT, 0, | |
| HDA_AMP_VOLMASK, 0x5a); | |
| snd_hda_codec_amp_stereo(codec, adc, HDA_INPUT, 0, | |
| HDA_AMP_MUTE, 0); | |
| } | |
| } | |
| static void refresh_amp_caps(struct hda_codec *codec, hda_nid_t nid, int dir) | |
| { | |
| unsigned int caps; | |
| caps = snd_hda_param_read(codec, nid, dir == HDA_OUTPUT ? | |
| AC_PAR_AMP_OUT_CAP : AC_PAR_AMP_IN_CAP); | |
| snd_hda_override_amp_caps(codec, nid, dir, caps); | |
| } | |
| /* | |
| * Switch between Digital built-in mic and analog mic. | |
| */ | |
| static void ca0132_set_dmic(struct hda_codec *codec, int enable) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int tmp; | |
| u8 val; | |
| unsigned int oldval; | |
| codec_dbg(codec, "ca0132_set_dmic: enable=%d\n", enable); | |
| oldval = stop_mic1(codec); | |
| ca0132_set_vipsource(codec, 0); | |
| if (enable) { | |
| /* set DMic input as 2-ch */ | |
| tmp = FLOAT_TWO; | |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); | |
| val = spec->dmic_ctl; | |
| val |= 0x80; | |
| snd_hda_codec_write(codec, spec->input_pins[0], 0, | |
| VENDOR_CHIPIO_DMIC_CTL_SET, val); | |
| if (!(spec->dmic_ctl & 0x20)) | |
| chipio_set_control_flag(codec, CONTROL_FLAG_DMIC, 1); | |
| } else { | |
| /* set AMic input as mono */ | |
| tmp = FLOAT_ONE; | |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); | |
| val = spec->dmic_ctl; | |
| /* clear bit7 and bit5 to disable dmic */ | |
| val &= 0x5f; | |
| snd_hda_codec_write(codec, spec->input_pins[0], 0, | |
| VENDOR_CHIPIO_DMIC_CTL_SET, val); | |
| if (!(spec->dmic_ctl & 0x20)) | |
| chipio_set_control_flag(codec, CONTROL_FLAG_DMIC, 0); | |
| } | |
| ca0132_set_vipsource(codec, 1); | |
| resume_mic1(codec, oldval); | |
| } | |
| /* | |
| * Initialization for Digital Mic. | |
| */ | |
| static void ca0132_init_dmic(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| u8 val; | |
| /* Setup Digital Mic here, but don't enable. | |
| * Enable based on jack detect. | |
| */ | |
| /* MCLK uses MPIO1, set to enable. | |
| * Bit 2-0: MPIO select | |
| * Bit 3: set to disable | |
| * Bit 7-4: reserved | |
| */ | |
| val = 0x01; | |
| snd_hda_codec_write(codec, spec->input_pins[0], 0, | |
| VENDOR_CHIPIO_DMIC_MCLK_SET, val); | |
| /* Data1 uses MPIO3. Data2 not use | |
| * Bit 2-0: Data1 MPIO select | |
| * Bit 3: set disable Data1 | |
| * Bit 6-4: Data2 MPIO select | |
| * Bit 7: set disable Data2 | |
| */ | |
| val = 0x83; | |
| snd_hda_codec_write(codec, spec->input_pins[0], 0, | |
| VENDOR_CHIPIO_DMIC_PIN_SET, val); | |
| /* Use Ch-0 and Ch-1. Rate is 48K, mode 1. Disable DMic first. | |
| * Bit 3-0: Channel mask | |
| * Bit 4: set for 48KHz, clear for 32KHz | |
| * Bit 5: mode | |
| * Bit 6: set to select Data2, clear for Data1 | |
| * Bit 7: set to enable DMic, clear for AMic | |
| */ | |
| if (ca0132_quirk(spec) == QUIRK_ALIENWARE_M17XR4) | |
| val = 0x33; | |
| else | |
| val = 0x23; | |
| /* keep a copy of dmic ctl val for enable/disable dmic purpuse */ | |
| spec->dmic_ctl = val; | |
| snd_hda_codec_write(codec, spec->input_pins[0], 0, | |
| VENDOR_CHIPIO_DMIC_CTL_SET, val); | |
| } | |
| /* | |
| * Initialization for Analog Mic 2 | |
| */ | |
| static void ca0132_init_analog_mic2(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| guard(mutex)(&spec->chipio_mutex); | |
| chipio_8051_write_exram_no_mutex(codec, 0x1920, 0x00); | |
| chipio_8051_write_exram_no_mutex(codec, 0x192d, 0x00); | |
| } | |
| static void ca0132_refresh_widget_caps(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int i; | |
| codec_dbg(codec, "ca0132_refresh_widget_caps.\n"); | |
| snd_hda_codec_update_widgets(codec); | |
| for (i = 0; i < spec->multiout.num_dacs; i++) | |
| refresh_amp_caps(codec, spec->dacs[i], HDA_OUTPUT); | |
| for (i = 0; i < spec->num_outputs; i++) | |
| refresh_amp_caps(codec, spec->out_pins[i], HDA_OUTPUT); | |
| for (i = 0; i < spec->num_inputs; i++) { | |
| refresh_amp_caps(codec, spec->adcs[i], HDA_INPUT); | |
| refresh_amp_caps(codec, spec->input_pins[i], HDA_INPUT); | |
| } | |
| } | |
| /* If there is an active channel for some reason, find it and free it. */ | |
| static void ca0132_alt_free_active_dma_channels(struct hda_codec *codec) | |
| { | |
| unsigned int i, tmp; | |
| int status; | |
| /* Read active DSPDMAC channel register. */ | |
| status = chipio_read(codec, DSPDMAC_CHNLSTART_MODULE_OFFSET, &tmp); | |
| if (status >= 0) { | |
| /* AND against 0xfff to get the active channel bits. */ | |
| tmp = tmp & 0xfff; | |
| /* If there are no active channels, nothing to free. */ | |
| if (!tmp) | |
| return; | |
| } else { | |
| codec_dbg(codec, "%s: Failed to read active DSP DMA channel register.\n", | |
| __func__); | |
| return; | |
| } | |
| /* | |
| * Check each DSP DMA channel for activity, and if the channel is | |
| * active, free it. | |
| */ | |
| for (i = 0; i < DSPDMAC_DMA_CFG_CHANNEL_COUNT; i++) { | |
| if (dsp_is_dma_active(codec, i)) { | |
| status = dspio_free_dma_chan(codec, i); | |
| if (status < 0) | |
| codec_dbg(codec, "%s: Failed to free active DSP DMA channel %d.\n", | |
| __func__, i); | |
| } | |
| } | |
| } | |
| /* | |
| * In the case of CT_EXTENSIONS_ENABLE being set to 1, and the DSP being in | |
| * use, audio is no longer routed directly to the DAC/ADC from the HDA stream. | |
| * Instead, audio is now routed through the DSP's DMA controllers, which | |
| * the DSP is tasked with setting up itself. Through debugging, it seems the | |
| * cause of most of the no-audio on startup issues were due to improperly | |
| * configured DSP DMA channels. | |
| * | |
| * Normally, the DSP configures these the first time an HDA audio stream is | |
| * started post DSP firmware download. That is why creating a 'dummy' stream | |
| * worked in fixing the audio in some cases. This works most of the time, but | |
| * sometimes if a stream is started/stopped before the DSP can setup the DMA | |
| * configuration registers, it ends up in a broken state. Issues can also | |
| * arise if streams are started in an unusual order, i.e the audio output dma | |
| * channel being sandwiched between the mic1 and mic2 dma channels. | |
| * | |
| * The solution to this is to make sure that the DSP has no DMA channels | |
| * in use post DSP firmware download, and then to manually start each default | |
| * DSP stream that uses the DMA channels. These are 0x0c, the audio output | |
| * stream, 0x03, analog mic 1, and 0x04, analog mic 2. | |
| */ | |
| static void ca0132_alt_start_dsp_audio_streams(struct hda_codec *codec) | |
| { | |
| static const unsigned int dsp_dma_stream_ids[] = { 0x0c, 0x03, 0x04 }; | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int i, tmp; | |
| /* | |
| * Check if any of the default streams are active, and if they are, | |
| * stop them. | |
| */ | |
| scoped_guard(mutex, &spec->chipio_mutex) { | |
| for (i = 0; i < ARRAY_SIZE(dsp_dma_stream_ids); i++) { | |
| chipio_get_stream_control(codec, dsp_dma_stream_ids[i], &tmp); | |
| if (tmp) { | |
| chipio_set_stream_control(codec, | |
| dsp_dma_stream_ids[i], 0); | |
| } | |
| } | |
| } | |
| /* | |
| * If all DSP streams are inactive, there should be no active DSP DMA | |
| * channels. Check and make sure this is the case, and if it isn't, | |
| * free any active channels. | |
| */ | |
| ca0132_alt_free_active_dma_channels(codec); | |
| guard(mutex)(&spec->chipio_mutex); | |
| /* Make sure stream 0x0c is six channels. */ | |
| chipio_set_stream_channels(codec, 0x0c, 6); | |
| for (i = 0; i < ARRAY_SIZE(dsp_dma_stream_ids); i++) { | |
| chipio_set_stream_control(codec, | |
| dsp_dma_stream_ids[i], 1); | |
| /* Give the DSP some time to setup the DMA channel. */ | |
| msleep(75); | |
| } | |
| } | |
| /* | |
| * The region of ChipIO memory from 0x190000-0x1903fc is a sort of 'audio | |
| * router', where each entry represents a 48khz audio channel, with a format | |
| * of an 8-bit destination, an 8-bit source, and an unknown 2-bit number | |
| * value. The 2-bit number value is seemingly 0 if inactive, 1 if active, | |
| * and 3 if it's using Sample Rate Converter ports. | |
| * An example is: | |
| * 0x0001f8c0 | |
| * In this case, f8 is the destination, and c0 is the source. The number value | |
| * is 1. | |
| * This region of memory is normally managed internally by the 8051, where | |
| * the region of exram memory from 0x1477-0x1575 has each byte represent an | |
| * entry within the 0x190000 range, and when a range of entries is in use, the | |
| * ending value is overwritten with 0xff. | |
| * 0x1578 in exram is a table of 0x25 entries, corresponding to the ChipIO | |
| * streamID's, where each entry is a starting 0x190000 port offset. | |
| * 0x159d in exram is the same as 0x1578, except it contains the ending port | |
| * offset for the corresponding streamID. | |
| * | |
| * On certain cards, such as the SBZ/ZxR/AE7, these are originally setup by | |
| * the 8051, then manually overwritten to remap the ports to work with the | |
| * new DACs. | |
| * | |
| * Currently known portID's: | |
| * 0x00-0x1f: HDA audio stream input/output ports. | |
| * 0x80-0xbf: Sample rate converter input/outputs. Only valid ports seem to | |
| * have the lower-nibble set to 0x1, 0x2, and 0x9. | |
| * 0xc0-0xdf: DSP DMA input/output ports. Dynamically assigned. | |
| * 0xe0-0xff: DAC/ADC audio input/output ports. | |
| * | |
| * Currently known streamID's: | |
| * 0x03: Mic1 ADC to DSP. | |
| * 0x04: Mic2 ADC to DSP. | |
| * 0x05: HDA node 0x02 audio stream to DSP. | |
| * 0x0f: DSP Mic exit to HDA node 0x07. | |
| * 0x0c: DSP processed audio to DACs. | |
| * 0x14: DAC0, front L/R. | |
| * | |
| * It is possible to route the HDA audio streams directly to the DAC and | |
| * bypass the DSP entirely, with the only downside being that since the DSP | |
| * does volume control, the only volume control you'll get is through PCM on | |
| * the PC side, in the same way volume is handled for optical out. This may be | |
| * useful for debugging. | |
| */ | |
| static void chipio_remap_stream(struct hda_codec *codec, | |
| const struct chipio_stream_remap_data *remap_data) | |
| { | |
| unsigned int i, stream_offset; | |
| /* Get the starting port for the stream to be remapped. */ | |
| chipio_8051_read_exram(codec, 0x1578 + remap_data->stream_id, | |
| &stream_offset); | |
| /* | |
| * Check if the stream's port value is 0xff, because the 8051 may not | |
| * have gotten around to setting up the stream yet. Wait until it's | |
| * setup to remap it's ports. | |
| */ | |
| if (stream_offset == 0xff) { | |
| for (i = 0; i < 5; i++) { | |
| msleep(25); | |
| chipio_8051_read_exram(codec, 0x1578 + remap_data->stream_id, | |
| &stream_offset); | |
| if (stream_offset != 0xff) | |
| break; | |
| } | |
| } | |
| if (stream_offset == 0xff) { | |
| codec_info(codec, "%s: Stream 0x%02x ports aren't allocated, remap failed!\n", | |
| __func__, remap_data->stream_id); | |
| return; | |
| } | |
| /* Offset isn't in bytes, its in 32-bit words, so multiply it by 4. */ | |
| stream_offset *= 0x04; | |
| stream_offset += 0x190000; | |
| for (i = 0; i < remap_data->count; i++) { | |
| chipio_write_no_mutex(codec, | |
| stream_offset + remap_data->offset[i], | |
| remap_data->value[i]); | |
| } | |
| /* Update stream map configuration. */ | |
| chipio_write_no_mutex(codec, 0x19042c, 0x00000001); | |
| } | |
| /* | |
| * Default speaker tuning values setup for alternative codecs. | |
| */ | |
| static const unsigned int sbz_default_delay_values[] = { | |
| /* Non-zero values are floating point 0.000198. */ | |
| 0x394f9e38, 0x394f9e38, 0x00000000, 0x00000000, 0x00000000, 0x00000000 | |
| }; | |
| static const unsigned int zxr_default_delay_values[] = { | |
| /* Non-zero values are floating point 0.000220. */ | |
| 0x00000000, 0x00000000, 0x3966afcd, 0x3966afcd, 0x3966afcd, 0x3966afcd | |
| }; | |
| static const unsigned int ae5_default_delay_values[] = { | |
| /* Non-zero values are floating point 0.000100. */ | |
| 0x00000000, 0x00000000, 0x38d1b717, 0x38d1b717, 0x38d1b717, 0x38d1b717 | |
| }; | |
| /* | |
| * If we never change these, probably only need them on initialization. | |
| */ | |
| static void ca0132_alt_init_speaker_tuning(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int i, tmp, start_req, end_req; | |
| const unsigned int *values; | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| values = sbz_default_delay_values; | |
| break; | |
| case QUIRK_ZXR: | |
| values = zxr_default_delay_values; | |
| break; | |
| case QUIRK_AE5: | |
| case QUIRK_AE7: | |
| values = ae5_default_delay_values; | |
| break; | |
| default: | |
| values = sbz_default_delay_values; | |
| break; | |
| } | |
| tmp = FLOAT_ZERO; | |
| dspio_set_uint_param(codec, 0x96, SPEAKER_TUNING_ENABLE_CENTER_EQ, tmp); | |
| start_req = SPEAKER_TUNING_FRONT_LEFT_VOL_LEVEL; | |
| end_req = SPEAKER_TUNING_REAR_RIGHT_VOL_LEVEL; | |
| for (i = start_req; i < end_req + 1; i++) | |
| dspio_set_uint_param(codec, 0x96, i, tmp); | |
| start_req = SPEAKER_TUNING_FRONT_LEFT_INVERT; | |
| end_req = SPEAKER_TUNING_REAR_RIGHT_INVERT; | |
| for (i = start_req; i < end_req + 1; i++) | |
| dspio_set_uint_param(codec, 0x96, i, tmp); | |
| for (i = 0; i < 6; i++) | |
| dspio_set_uint_param(codec, 0x96, | |
| SPEAKER_TUNING_FRONT_LEFT_DELAY + i, values[i]); | |
| } | |
| /* | |
| * Initialize mic for non-chromebook ca0132 implementations. | |
| */ | |
| static void ca0132_alt_init_analog_mics(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int tmp; | |
| /* Mic 1 Setup */ | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); | |
| if (ca0132_quirk(spec) == QUIRK_R3DI) { | |
| chipio_set_conn_rate(codec, 0x0F, SR_96_000); | |
| tmp = FLOAT_ONE; | |
| } else | |
| tmp = FLOAT_THREE; | |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); | |
| /* Mic 2 setup (not present on desktop cards) */ | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN2, SR_96_000); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2, SR_96_000); | |
| if (ca0132_quirk(spec) == QUIRK_R3DI) | |
| chipio_set_conn_rate(codec, 0x0F, SR_96_000); | |
| tmp = FLOAT_ZERO; | |
| dspio_set_uint_param(codec, 0x80, 0x01, tmp); | |
| } | |
| /* | |
| * Sets the source of stream 0x14 to connpointID 0x48, and the destination | |
| * connpointID to 0x91. If this isn't done, the destination is 0x71, and | |
| * you get no sound. I'm guessing this has to do with the Sound Blaster Z | |
| * having an updated DAC, which changes the destination to that DAC. | |
| */ | |
| static void sbz_connect_streams(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| guard(mutex)(&spec->chipio_mutex); | |
| codec_dbg(codec, "Connect Streams entered, mutex locked and loaded.\n"); | |
| /* This value is 0x43 for 96khz, and 0x83 for 192khz. */ | |
| chipio_write_no_mutex(codec, 0x18a020, 0x00000043); | |
| /* Setup stream 0x14 with it's source and destination points */ | |
| chipio_set_stream_source_dest(codec, 0x14, 0x48, 0x91); | |
| chipio_set_conn_rate_no_mutex(codec, 0x48, SR_96_000); | |
| chipio_set_conn_rate_no_mutex(codec, 0x91, SR_96_000); | |
| chipio_set_stream_channels(codec, 0x14, 2); | |
| chipio_set_stream_control(codec, 0x14, 1); | |
| codec_dbg(codec, "Connect Streams exited, mutex released.\n"); | |
| } | |
| /* | |
| * Write data through ChipIO to setup proper stream destinations. | |
| * Not sure how it exactly works, but it seems to direct data | |
| * to different destinations. Example is f8 to c0, e0 to c0. | |
| * All I know is, if you don't set these, you get no sound. | |
| */ | |
| static void sbz_chipio_startup_data(struct hda_codec *codec) | |
| { | |
| const struct chipio_stream_remap_data *dsp_out_remap_data; | |
| struct ca0132_spec *spec = codec->spec; | |
| guard(mutex)(&spec->chipio_mutex); | |
| codec_dbg(codec, "Startup Data entered, mutex locked and loaded.\n"); | |
| /* Remap DAC0's output ports. */ | |
| chipio_remap_stream(codec, &stream_remap_data[0]); | |
| /* Remap DSP audio output stream ports. */ | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| dsp_out_remap_data = &stream_remap_data[1]; | |
| break; | |
| case QUIRK_ZXR: | |
| dsp_out_remap_data = &stream_remap_data[2]; | |
| break; | |
| default: | |
| dsp_out_remap_data = NULL; | |
| break; | |
| } | |
| if (dsp_out_remap_data) | |
| chipio_remap_stream(codec, dsp_out_remap_data); | |
| codec_dbg(codec, "Startup Data exited, mutex released.\n"); | |
| } | |
| static void ca0132_alt_dsp_initial_mic_setup(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int tmp; | |
| chipio_set_stream_control(codec, 0x03, 0); | |
| chipio_set_stream_control(codec, 0x04, 0); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); | |
| tmp = FLOAT_THREE; | |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); | |
| chipio_set_stream_control(codec, 0x03, 1); | |
| chipio_set_stream_control(codec, 0x04, 1); | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| chipio_write(codec, 0x18b098, 0x0000000c); | |
| chipio_write(codec, 0x18b09C, 0x0000000c); | |
| break; | |
| case QUIRK_AE5: | |
| chipio_write(codec, 0x18b098, 0x0000000c); | |
| chipio_write(codec, 0x18b09c, 0x0000004c); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static void ae5_post_dsp_register_set(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| chipio_8051_write_direct(codec, 0x93, 0x10); | |
| chipio_8051_write_pll_pmu(codec, 0x44, 0xc2); | |
| writeb(0xff, spec->mem_base + 0x304); | |
| writeb(0xff, spec->mem_base + 0x304); | |
| writeb(0xff, spec->mem_base + 0x304); | |
| writeb(0xff, spec->mem_base + 0x304); | |
| writeb(0x00, spec->mem_base + 0x100); | |
| writeb(0xff, spec->mem_base + 0x304); | |
| writeb(0x00, spec->mem_base + 0x100); | |
| writeb(0xff, spec->mem_base + 0x304); | |
| writeb(0x00, spec->mem_base + 0x100); | |
| writeb(0xff, spec->mem_base + 0x304); | |
| writeb(0x00, spec->mem_base + 0x100); | |
| writeb(0xff, spec->mem_base + 0x304); | |
| ca0113_mmio_command_set(codec, 0x30, 0x2b, 0x3f); | |
| ca0113_mmio_command_set(codec, 0x30, 0x2d, 0x3f); | |
| ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83); | |
| } | |
| static void ae5_post_dsp_param_setup(struct hda_codec *codec) | |
| { | |
| /* | |
| * Param3 in the 8051's memory is represented by the ascii string 'mch' | |
| * which seems to be 'multichannel'. This is also mentioned in the | |
| * AE-5's registry values in Windows. | |
| */ | |
| chipio_set_control_param(codec, 3, 0); | |
| /* | |
| * I believe ASI is 'audio serial interface' and that it's used to | |
| * change colors on the external LED strip connected to the AE-5. | |
| */ | |
| chipio_set_control_flag(codec, CONTROL_FLAG_ASI_96KHZ, 1); | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x724, 0x83); | |
| chipio_set_control_param(codec, CONTROL_PARAM_ASI, 0); | |
| chipio_8051_write_exram(codec, 0xfa92, 0x22); | |
| } | |
| static void ae5_post_dsp_pll_setup(struct hda_codec *codec) | |
| { | |
| chipio_8051_write_pll_pmu(codec, 0x41, 0xc8); | |
| chipio_8051_write_pll_pmu(codec, 0x45, 0xcc); | |
| chipio_8051_write_pll_pmu(codec, 0x40, 0xcb); | |
| chipio_8051_write_pll_pmu(codec, 0x43, 0xc7); | |
| chipio_8051_write_pll_pmu(codec, 0x51, 0x8d); | |
| } | |
| static void ae5_post_dsp_stream_setup(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| guard(mutex)(&spec->chipio_mutex); | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x725, 0x81); | |
| chipio_set_conn_rate_no_mutex(codec, 0x70, SR_96_000); | |
| chipio_set_stream_source_dest(codec, 0x5, 0x43, 0x0); | |
| chipio_set_stream_source_dest(codec, 0x18, 0x9, 0xd0); | |
| chipio_set_conn_rate_no_mutex(codec, 0xd0, SR_96_000); | |
| chipio_set_stream_channels(codec, 0x18, 6); | |
| chipio_set_stream_control(codec, 0x18, 1); | |
| chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_ASI, 4); | |
| chipio_8051_write_pll_pmu_no_mutex(codec, 0x43, 0xc7); | |
| ca0113_mmio_command_set(codec, 0x48, 0x01, 0x80); | |
| } | |
| static void ae5_post_dsp_startup_data(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| guard(mutex)(&spec->chipio_mutex); | |
| chipio_write_no_mutex(codec, 0x189000, 0x0001f101); | |
| chipio_write_no_mutex(codec, 0x189004, 0x0001f101); | |
| chipio_write_no_mutex(codec, 0x189024, 0x00014004); | |
| chipio_write_no_mutex(codec, 0x189028, 0x0002000f); | |
| ca0113_mmio_command_set(codec, 0x48, 0x0a, 0x05); | |
| chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_ASI, 7); | |
| ca0113_mmio_command_set(codec, 0x48, 0x0b, 0x12); | |
| ca0113_mmio_command_set(codec, 0x48, 0x04, 0x00); | |
| ca0113_mmio_command_set(codec, 0x48, 0x06, 0x48); | |
| ca0113_mmio_command_set(codec, 0x48, 0x0a, 0x05); | |
| ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83); | |
| ca0113_mmio_command_set(codec, 0x48, 0x0f, 0x00); | |
| ca0113_mmio_command_set(codec, 0x48, 0x10, 0x00); | |
| ca0113_mmio_gpio_set(codec, 0, true); | |
| ca0113_mmio_gpio_set(codec, 1, true); | |
| ca0113_mmio_command_set(codec, 0x48, 0x07, 0x80); | |
| chipio_write_no_mutex(codec, 0x18b03c, 0x00000012); | |
| ca0113_mmio_command_set(codec, 0x48, 0x0f, 0x00); | |
| ca0113_mmio_command_set(codec, 0x48, 0x10, 0x00); | |
| } | |
| static void ae7_post_dsp_setup_ports(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| guard(mutex)(&spec->chipio_mutex); | |
| /* Seems to share the same port remapping as the SBZ. */ | |
| chipio_remap_stream(codec, &stream_remap_data[1]); | |
| ca0113_mmio_command_set(codec, 0x30, 0x30, 0x00); | |
| ca0113_mmio_command_set(codec, 0x48, 0x0d, 0x40); | |
| ca0113_mmio_command_set(codec, 0x48, 0x17, 0x00); | |
| ca0113_mmio_command_set(codec, 0x48, 0x19, 0x00); | |
| ca0113_mmio_command_set(codec, 0x48, 0x11, 0xff); | |
| ca0113_mmio_command_set(codec, 0x48, 0x12, 0xff); | |
| ca0113_mmio_command_set(codec, 0x48, 0x13, 0xff); | |
| ca0113_mmio_command_set(codec, 0x48, 0x14, 0x7f); | |
| } | |
| static void ae7_post_dsp_asi_stream_setup(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| guard(mutex)(&spec->chipio_mutex); | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x725, 0x81); | |
| ca0113_mmio_command_set(codec, 0x30, 0x2b, 0x00); | |
| chipio_set_conn_rate_no_mutex(codec, 0x70, SR_96_000); | |
| chipio_set_stream_source_dest(codec, 0x05, 0x43, 0x00); | |
| chipio_set_stream_source_dest(codec, 0x18, 0x09, 0xd0); | |
| chipio_set_conn_rate_no_mutex(codec, 0xd0, SR_96_000); | |
| chipio_set_stream_channels(codec, 0x18, 6); | |
| chipio_set_stream_control(codec, 0x18, 1); | |
| chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_ASI, 4); | |
| } | |
| static void ae7_post_dsp_pll_setup(struct hda_codec *codec) | |
| { | |
| static const unsigned int addr[] = { | |
| 0x41, 0x45, 0x40, 0x43, 0x51 | |
| }; | |
| static const unsigned int data[] = { | |
| 0xc8, 0xcc, 0xcb, 0xc7, 0x8d | |
| }; | |
| unsigned int i; | |
| for (i = 0; i < ARRAY_SIZE(addr); i++) | |
| chipio_8051_write_pll_pmu_no_mutex(codec, addr[i], data[i]); | |
| } | |
| static void ae7_post_dsp_asi_setup_ports(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| static const unsigned int target[] = { | |
| 0x0b, 0x04, 0x06, 0x0a, 0x0c, 0x11, 0x12, 0x13, 0x14 | |
| }; | |
| static const unsigned int data[] = { | |
| 0x12, 0x00, 0x48, 0x05, 0x5f, 0xff, 0xff, 0xff, 0x7f | |
| }; | |
| unsigned int i; | |
| guard(mutex)(&spec->chipio_mutex); | |
| chipio_8051_write_pll_pmu_no_mutex(codec, 0x43, 0xc7); | |
| chipio_write_no_mutex(codec, 0x189000, 0x0001f101); | |
| chipio_write_no_mutex(codec, 0x189004, 0x0001f101); | |
| chipio_write_no_mutex(codec, 0x189024, 0x00014004); | |
| chipio_write_no_mutex(codec, 0x189028, 0x0002000f); | |
| ae7_post_dsp_pll_setup(codec); | |
| chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_ASI, 7); | |
| for (i = 0; i < ARRAY_SIZE(target); i++) | |
| ca0113_mmio_command_set(codec, 0x48, target[i], data[i]); | |
| ca0113_mmio_command_set_type2(codec, 0x48, 0x07, 0x83); | |
| ca0113_mmio_command_set(codec, 0x48, 0x0f, 0x00); | |
| ca0113_mmio_command_set(codec, 0x48, 0x10, 0x00); | |
| chipio_set_stream_source_dest(codec, 0x21, 0x64, 0x56); | |
| chipio_set_stream_channels(codec, 0x21, 2); | |
| chipio_set_conn_rate_no_mutex(codec, 0x56, SR_8_000); | |
| chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_NODE_ID, 0x09); | |
| /* | |
| * In the 8051's memory, this param is referred to as 'n2sid', which I | |
| * believe is 'node to streamID'. It seems to be a way to assign a | |
| * stream to a given HDA node. | |
| */ | |
| chipio_set_control_param_no_mutex(codec, 0x20, 0x21); | |
| chipio_write_no_mutex(codec, 0x18b038, 0x00000088); | |
| /* | |
| * Now, at this point on Windows, an actual stream is setup and | |
| * seemingly sends data to the HDA node 0x09, which is the digital | |
| * audio input node. This is left out here, because obviously I don't | |
| * know what data is being sent. Interestingly, the AE-5 seems to go | |
| * through the motions of getting here and never actually takes this | |
| * step, but the AE-7 does. | |
| */ | |
| ca0113_mmio_gpio_set(codec, 0, 1); | |
| ca0113_mmio_gpio_set(codec, 1, 1); | |
| ca0113_mmio_command_set_type2(codec, 0x48, 0x07, 0x83); | |
| chipio_write_no_mutex(codec, 0x18b03c, 0x00000000); | |
| ca0113_mmio_command_set(codec, 0x48, 0x0f, 0x00); | |
| ca0113_mmio_command_set(codec, 0x48, 0x10, 0x00); | |
| chipio_set_stream_source_dest(codec, 0x05, 0x43, 0x00); | |
| chipio_set_stream_source_dest(codec, 0x18, 0x09, 0xd0); | |
| chipio_set_conn_rate_no_mutex(codec, 0xd0, SR_96_000); | |
| chipio_set_stream_channels(codec, 0x18, 6); | |
| /* | |
| * Runs again, this has been repeated a few times, but I'm just | |
| * following what the Windows driver does. | |
| */ | |
| ae7_post_dsp_pll_setup(codec); | |
| chipio_set_control_param_no_mutex(codec, CONTROL_PARAM_ASI, 7); | |
| } | |
| /* | |
| * The Windows driver has commands that seem to setup ASI, which I believe to | |
| * be some sort of audio serial interface. My current speculation is that it's | |
| * related to communicating with the new DAC. | |
| */ | |
| static void ae7_post_dsp_asi_setup(struct hda_codec *codec) | |
| { | |
| chipio_8051_write_direct(codec, 0x93, 0x10); | |
| chipio_8051_write_pll_pmu(codec, 0x44, 0xc2); | |
| ca0113_mmio_command_set_type2(codec, 0x48, 0x07, 0x83); | |
| ca0113_mmio_command_set(codec, 0x30, 0x2e, 0x3f); | |
| chipio_set_control_param(codec, 3, 3); | |
| chipio_set_control_flag(codec, CONTROL_FLAG_ASI_96KHZ, 1); | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x724, 0x83); | |
| chipio_set_control_param(codec, CONTROL_PARAM_ASI, 0); | |
| snd_hda_codec_write(codec, 0x17, 0, 0x794, 0x00); | |
| chipio_8051_write_exram(codec, 0xfa92, 0x22); | |
| ae7_post_dsp_pll_setup(codec); | |
| ae7_post_dsp_asi_stream_setup(codec); | |
| chipio_8051_write_pll_pmu(codec, 0x43, 0xc7); | |
| ae7_post_dsp_asi_setup_ports(codec); | |
| } | |
| /* | |
| * Setup default parameters for DSP | |
| */ | |
| static void ca0132_setup_defaults(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int tmp; | |
| int num_fx; | |
| int idx, i; | |
| if (spec->dsp_state != DSP_DOWNLOADED) | |
| return; | |
| /* out, in effects + voicefx */ | |
| num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1; | |
| for (idx = 0; idx < num_fx; idx++) { | |
| for (i = 0; i <= ca0132_effects[idx].params; i++) { | |
| dspio_set_uint_param(codec, ca0132_effects[idx].mid, | |
| ca0132_effects[idx].reqs[i], | |
| ca0132_effects[idx].def_vals[i]); | |
| } | |
| } | |
| /*remove DSP headroom*/ | |
| tmp = FLOAT_ZERO; | |
| dspio_set_uint_param(codec, 0x96, 0x3C, tmp); | |
| /*set speaker EQ bypass attenuation*/ | |
| dspio_set_uint_param(codec, 0x8f, 0x01, tmp); | |
| /* set AMic1 and AMic2 as mono mic */ | |
| tmp = FLOAT_ONE; | |
| dspio_set_uint_param(codec, 0x80, 0x00, tmp); | |
| dspio_set_uint_param(codec, 0x80, 0x01, tmp); | |
| /* set AMic1 as CrystalVoice input */ | |
| tmp = FLOAT_ONE; | |
| dspio_set_uint_param(codec, 0x80, 0x05, tmp); | |
| /* set WUH source */ | |
| tmp = FLOAT_TWO; | |
| dspio_set_uint_param(codec, 0x31, 0x00, tmp); | |
| } | |
| /* | |
| * Setup default parameters for Recon3D/Recon3Di DSP. | |
| */ | |
| static void r3d_setup_defaults(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int tmp; | |
| int num_fx; | |
| int idx, i; | |
| if (spec->dsp_state != DSP_DOWNLOADED) | |
| return; | |
| ca0132_alt_init_analog_mics(codec); | |
| ca0132_alt_start_dsp_audio_streams(codec); | |
| /*remove DSP headroom*/ | |
| tmp = FLOAT_ZERO; | |
| dspio_set_uint_param(codec, 0x96, 0x3C, tmp); | |
| /* set WUH source */ | |
| tmp = FLOAT_TWO; | |
| dspio_set_uint_param(codec, 0x31, 0x00, tmp); | |
| chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); | |
| /* Set speaker source? */ | |
| dspio_set_uint_param(codec, 0x32, 0x00, tmp); | |
| if (ca0132_quirk(spec) == QUIRK_R3DI) | |
| r3di_gpio_dsp_status_set(codec, R3DI_DSP_DOWNLOADED); | |
| /* Disable mute on Center/LFE. */ | |
| if (ca0132_quirk(spec) == QUIRK_R3D) { | |
| ca0113_mmio_gpio_set(codec, 2, false); | |
| ca0113_mmio_gpio_set(codec, 4, true); | |
| } | |
| /* Setup effect defaults */ | |
| num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1; | |
| for (idx = 0; idx < num_fx; idx++) { | |
| for (i = 0; i <= ca0132_effects[idx].params; i++) { | |
| dspio_set_uint_param(codec, | |
| ca0132_effects[idx].mid, | |
| ca0132_effects[idx].reqs[i], | |
| ca0132_effects[idx].def_vals[i]); | |
| } | |
| } | |
| } | |
| /* | |
| * Setup default parameters for the Sound Blaster Z DSP. A lot more going on | |
| * than the Chromebook setup. | |
| */ | |
| static void sbz_setup_defaults(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int tmp; | |
| int num_fx; | |
| int idx, i; | |
| if (spec->dsp_state != DSP_DOWNLOADED) | |
| return; | |
| ca0132_alt_init_analog_mics(codec); | |
| ca0132_alt_start_dsp_audio_streams(codec); | |
| sbz_connect_streams(codec); | |
| sbz_chipio_startup_data(codec); | |
| /* | |
| * Sets internal input loopback to off, used to have a switch to | |
| * enable input loopback, but turned out to be way too buggy. | |
| */ | |
| tmp = FLOAT_ONE; | |
| dspio_set_uint_param(codec, 0x37, 0x08, tmp); | |
| dspio_set_uint_param(codec, 0x37, 0x10, tmp); | |
| /*remove DSP headroom*/ | |
| tmp = FLOAT_ZERO; | |
| dspio_set_uint_param(codec, 0x96, 0x3C, tmp); | |
| /* set WUH source */ | |
| tmp = FLOAT_TWO; | |
| dspio_set_uint_param(codec, 0x31, 0x00, tmp); | |
| chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); | |
| /* Set speaker source? */ | |
| dspio_set_uint_param(codec, 0x32, 0x00, tmp); | |
| ca0132_alt_dsp_initial_mic_setup(codec); | |
| /* out, in effects + voicefx */ | |
| num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1; | |
| for (idx = 0; idx < num_fx; idx++) { | |
| for (i = 0; i <= ca0132_effects[idx].params; i++) { | |
| dspio_set_uint_param(codec, | |
| ca0132_effects[idx].mid, | |
| ca0132_effects[idx].reqs[i], | |
| ca0132_effects[idx].def_vals[i]); | |
| } | |
| } | |
| ca0132_alt_init_speaker_tuning(codec); | |
| } | |
| /* | |
| * Setup default parameters for the Sound BlasterX AE-5 DSP. | |
| */ | |
| static void ae5_setup_defaults(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int tmp; | |
| int num_fx; | |
| int idx, i; | |
| if (spec->dsp_state != DSP_DOWNLOADED) | |
| return; | |
| ca0132_alt_init_analog_mics(codec); | |
| ca0132_alt_start_dsp_audio_streams(codec); | |
| /* New, unknown SCP req's */ | |
| tmp = FLOAT_ZERO; | |
| dspio_set_uint_param(codec, 0x96, 0x29, tmp); | |
| dspio_set_uint_param(codec, 0x96, 0x2a, tmp); | |
| dspio_set_uint_param(codec, 0x80, 0x0d, tmp); | |
| dspio_set_uint_param(codec, 0x80, 0x0e, tmp); | |
| ca0113_mmio_command_set(codec, 0x30, 0x2e, 0x3f); | |
| ca0113_mmio_gpio_set(codec, 0, false); | |
| ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00); | |
| /* Internal loopback off */ | |
| tmp = FLOAT_ONE; | |
| dspio_set_uint_param(codec, 0x37, 0x08, tmp); | |
| dspio_set_uint_param(codec, 0x37, 0x10, tmp); | |
| /*remove DSP headroom*/ | |
| tmp = FLOAT_ZERO; | |
| dspio_set_uint_param(codec, 0x96, 0x3C, tmp); | |
| /* set WUH source */ | |
| tmp = FLOAT_TWO; | |
| dspio_set_uint_param(codec, 0x31, 0x00, tmp); | |
| chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); | |
| /* Set speaker source? */ | |
| dspio_set_uint_param(codec, 0x32, 0x00, tmp); | |
| ca0132_alt_dsp_initial_mic_setup(codec); | |
| ae5_post_dsp_register_set(codec); | |
| ae5_post_dsp_param_setup(codec); | |
| ae5_post_dsp_pll_setup(codec); | |
| ae5_post_dsp_stream_setup(codec); | |
| ae5_post_dsp_startup_data(codec); | |
| /* out, in effects + voicefx */ | |
| num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1; | |
| for (idx = 0; idx < num_fx; idx++) { | |
| for (i = 0; i <= ca0132_effects[idx].params; i++) { | |
| dspio_set_uint_param(codec, | |
| ca0132_effects[idx].mid, | |
| ca0132_effects[idx].reqs[i], | |
| ca0132_effects[idx].def_vals[i]); | |
| } | |
| } | |
| ca0132_alt_init_speaker_tuning(codec); | |
| } | |
| /* | |
| * Setup default parameters for the Sound Blaster AE-7 DSP. | |
| */ | |
| static void ae7_setup_defaults(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int tmp; | |
| int num_fx; | |
| int idx, i; | |
| if (spec->dsp_state != DSP_DOWNLOADED) | |
| return; | |
| ca0132_alt_init_analog_mics(codec); | |
| ca0132_alt_start_dsp_audio_streams(codec); | |
| ae7_post_dsp_setup_ports(codec); | |
| tmp = FLOAT_ZERO; | |
| dspio_set_uint_param(codec, 0x96, | |
| SPEAKER_TUNING_FRONT_LEFT_INVERT, tmp); | |
| dspio_set_uint_param(codec, 0x96, | |
| SPEAKER_TUNING_FRONT_RIGHT_INVERT, tmp); | |
| ca0113_mmio_command_set(codec, 0x30, 0x2e, 0x3f); | |
| /* New, unknown SCP req's */ | |
| dspio_set_uint_param(codec, 0x80, 0x0d, tmp); | |
| dspio_set_uint_param(codec, 0x80, 0x0e, tmp); | |
| ca0113_mmio_gpio_set(codec, 0, false); | |
| /* Internal loopback off */ | |
| tmp = FLOAT_ONE; | |
| dspio_set_uint_param(codec, 0x37, 0x08, tmp); | |
| dspio_set_uint_param(codec, 0x37, 0x10, tmp); | |
| /*remove DSP headroom*/ | |
| tmp = FLOAT_ZERO; | |
| dspio_set_uint_param(codec, 0x96, 0x3C, tmp); | |
| /* set WUH source */ | |
| tmp = FLOAT_TWO; | |
| dspio_set_uint_param(codec, 0x31, 0x00, tmp); | |
| chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); | |
| /* Set speaker source? */ | |
| dspio_set_uint_param(codec, 0x32, 0x00, tmp); | |
| ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00); | |
| /* | |
| * This is the second time we've called this, but this is seemingly | |
| * what Windows does. | |
| */ | |
| ca0132_alt_init_analog_mics(codec); | |
| ae7_post_dsp_asi_setup(codec); | |
| /* | |
| * Not sure why, but these are both set to 1. They're only set to 0 | |
| * upon shutdown. | |
| */ | |
| ca0113_mmio_gpio_set(codec, 0, true); | |
| ca0113_mmio_gpio_set(codec, 1, true); | |
| /* Volume control related. */ | |
| ca0113_mmio_command_set(codec, 0x48, 0x0f, 0x04); | |
| ca0113_mmio_command_set(codec, 0x48, 0x10, 0x04); | |
| ca0113_mmio_command_set_type2(codec, 0x48, 0x07, 0x80); | |
| /* out, in effects + voicefx */ | |
| num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT + 1; | |
| for (idx = 0; idx < num_fx; idx++) { | |
| for (i = 0; i <= ca0132_effects[idx].params; i++) { | |
| dspio_set_uint_param(codec, | |
| ca0132_effects[idx].mid, | |
| ca0132_effects[idx].reqs[i], | |
| ca0132_effects[idx].def_vals[i]); | |
| } | |
| } | |
| ca0132_alt_init_speaker_tuning(codec); | |
| } | |
| /* | |
| * Initialization of flags in chip | |
| */ | |
| static void ca0132_init_flags(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| if (ca0132_use_alt_functions(spec)) { | |
| chipio_set_control_flag(codec, CONTROL_FLAG_DSP_96KHZ, 1); | |
| chipio_set_control_flag(codec, CONTROL_FLAG_DAC_96KHZ, 1); | |
| chipio_set_control_flag(codec, CONTROL_FLAG_ADC_B_96KHZ, 1); | |
| chipio_set_control_flag(codec, CONTROL_FLAG_ADC_C_96KHZ, 1); | |
| chipio_set_control_flag(codec, CONTROL_FLAG_SRC_RATE_96KHZ, 1); | |
| chipio_set_control_flag(codec, CONTROL_FLAG_IDLE_ENABLE, 0); | |
| chipio_set_control_flag(codec, CONTROL_FLAG_SPDIF2OUT, 0); | |
| chipio_set_control_flag(codec, | |
| CONTROL_FLAG_PORT_D_10KOHM_LOAD, 0); | |
| chipio_set_control_flag(codec, | |
| CONTROL_FLAG_PORT_A_10KOHM_LOAD, 1); | |
| } else { | |
| chipio_set_control_flag(codec, CONTROL_FLAG_IDLE_ENABLE, 0); | |
| chipio_set_control_flag(codec, | |
| CONTROL_FLAG_PORT_A_COMMON_MODE, 0); | |
| chipio_set_control_flag(codec, | |
| CONTROL_FLAG_PORT_D_COMMON_MODE, 0); | |
| chipio_set_control_flag(codec, | |
| CONTROL_FLAG_PORT_A_10KOHM_LOAD, 0); | |
| chipio_set_control_flag(codec, | |
| CONTROL_FLAG_PORT_D_10KOHM_LOAD, 0); | |
| chipio_set_control_flag(codec, CONTROL_FLAG_ADC_C_HIGH_PASS, 1); | |
| } | |
| } | |
| /* | |
| * Initialization of parameters in chip | |
| */ | |
| static void ca0132_init_params(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| if (ca0132_use_alt_functions(spec)) { | |
| chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); | |
| chipio_set_conn_rate(codec, 0x0B, SR_48_000); | |
| chipio_set_control_param(codec, CONTROL_PARAM_SPDIF1_SOURCE, 0); | |
| chipio_set_control_param(codec, 0, 0); | |
| chipio_set_control_param(codec, CONTROL_PARAM_VIP_SOURCE, 0); | |
| } | |
| chipio_set_control_param(codec, CONTROL_PARAM_PORTA_160OHM_GAIN, 6); | |
| chipio_set_control_param(codec, CONTROL_PARAM_PORTD_160OHM_GAIN, 6); | |
| } | |
| static void ca0132_set_dsp_msr(struct hda_codec *codec, bool is96k) | |
| { | |
| chipio_set_control_flag(codec, CONTROL_FLAG_DSP_96KHZ, is96k); | |
| chipio_set_control_flag(codec, CONTROL_FLAG_DAC_96KHZ, is96k); | |
| chipio_set_control_flag(codec, CONTROL_FLAG_SRC_RATE_96KHZ, is96k); | |
| chipio_set_control_flag(codec, CONTROL_FLAG_SRC_CLOCK_196MHZ, is96k); | |
| chipio_set_control_flag(codec, CONTROL_FLAG_ADC_B_96KHZ, is96k); | |
| chipio_set_control_flag(codec, CONTROL_FLAG_ADC_C_96KHZ, is96k); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICIN1, SR_96_000); | |
| chipio_set_conn_rate(codec, MEM_CONNID_MICOUT1, SR_96_000); | |
| chipio_set_conn_rate(codec, MEM_CONNID_WUH, SR_48_000); | |
| } | |
| static bool ca0132_download_dsp_images(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| const struct dsp_image_seg *dsp_os_image; | |
| const struct firmware *fw_entry __free(firmware) = NULL; | |
| /* | |
| * Alternate firmwares for different variants. The Recon3Di apparently | |
| * can use the default firmware, but I'll leave the option in case | |
| * it needs it again. | |
| */ | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| case QUIRK_R3D: | |
| case QUIRK_AE5: | |
| if (request_firmware(&fw_entry, DESKTOP_EFX_FILE, | |
| codec->card->dev) != 0) | |
| codec_dbg(codec, "Desktop firmware not found."); | |
| else | |
| codec_dbg(codec, "Desktop firmware selected."); | |
| break; | |
| case QUIRK_R3DI: | |
| if (request_firmware(&fw_entry, R3DI_EFX_FILE, | |
| codec->card->dev) != 0) | |
| codec_dbg(codec, "Recon3Di alt firmware not detected."); | |
| else | |
| codec_dbg(codec, "Recon3Di firmware selected."); | |
| break; | |
| default: | |
| break; | |
| } | |
| /* | |
| * Use default ctefx.bin if no alt firmware is detected, or if none | |
| * exists for your particular codec. | |
| */ | |
| if (!fw_entry) { | |
| codec_dbg(codec, "Default firmware selected."); | |
| if (request_firmware(&fw_entry, EFX_FILE, | |
| codec->card->dev) != 0) | |
| return false; | |
| } | |
| dsp_os_image = (struct dsp_image_seg *)(fw_entry->data); | |
| if (dspload_image(codec, dsp_os_image, 0, 0, true, 0)) { | |
| codec_err(codec, "ca0132 DSP load image failed\n"); | |
| return false; | |
| } | |
| return dspload_wait_loaded(codec); | |
| } | |
| static void ca0132_download_dsp(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| #ifndef CONFIG_SND_HDA_CODEC_CA0132_DSP | |
| return; /* NOP */ | |
| #endif | |
| if (spec->dsp_state == DSP_DOWNLOAD_FAILED) | |
| return; /* don't retry failures */ | |
| chipio_enable_clocks(codec); | |
| if (spec->dsp_state != DSP_DOWNLOADED) { | |
| spec->dsp_state = DSP_DOWNLOADING; | |
| if (!ca0132_download_dsp_images(codec)) | |
| spec->dsp_state = DSP_DOWNLOAD_FAILED; | |
| else | |
| spec->dsp_state = DSP_DOWNLOADED; | |
| } | |
| /* For codecs using alt functions, this is already done earlier */ | |
| if (spec->dsp_state == DSP_DOWNLOADED && !ca0132_use_alt_functions(spec)) | |
| ca0132_set_dsp_msr(codec, true); | |
| } | |
| static void ca0132_process_dsp_response(struct hda_codec *codec, | |
| struct hda_jack_callback *callback) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| codec_dbg(codec, "ca0132_process_dsp_response\n"); | |
| CLASS(snd_hda_power_pm, pm)(codec); | |
| if (spec->wait_scp) { | |
| if (dspio_get_response_data(codec) >= 0) | |
| spec->wait_scp = 0; | |
| } | |
| dspio_clear_response_queue(codec); | |
| } | |
| static void hp_callback(struct hda_codec *codec, struct hda_jack_callback *cb) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| struct hda_jack_tbl *tbl; | |
| /* Delay enabling the HP amp, to let the mic-detection | |
| * state machine run. | |
| */ | |
| tbl = snd_hda_jack_tbl_get(codec, cb->nid); | |
| if (tbl) | |
| tbl->block_report = 1; | |
| schedule_delayed_work(&spec->unsol_hp_work, msecs_to_jiffies(500)); | |
| } | |
| static void amic_callback(struct hda_codec *codec, struct hda_jack_callback *cb) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| if (ca0132_use_alt_functions(spec)) | |
| ca0132_alt_select_in(codec); | |
| else | |
| ca0132_select_mic(codec); | |
| } | |
| static void ca0132_setup_unsol(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| snd_hda_jack_detect_enable_callback(codec, spec->unsol_tag_hp, hp_callback); | |
| snd_hda_jack_detect_enable_callback(codec, spec->unsol_tag_amic1, | |
| amic_callback); | |
| snd_hda_jack_detect_enable_callback(codec, UNSOL_TAG_DSP, | |
| ca0132_process_dsp_response); | |
| /* Front headphone jack detection */ | |
| if (ca0132_use_alt_functions(spec)) | |
| snd_hda_jack_detect_enable_callback(codec, | |
| spec->unsol_tag_front_hp, hp_callback); | |
| } | |
| /* | |
| * Verbs tables. | |
| */ | |
| /* Sends before DSP download. */ | |
| static const struct hda_verb ca0132_base_init_verbs[] = { | |
| /*enable ct extension*/ | |
| {0x15, VENDOR_CHIPIO_CT_EXTENSIONS_ENABLE, 0x1}, | |
| {} | |
| }; | |
| /* Send at exit. */ | |
| static const struct hda_verb ca0132_base_exit_verbs[] = { | |
| /*set afg to D3*/ | |
| {0x01, AC_VERB_SET_POWER_STATE, 0x03}, | |
| /*disable ct extension*/ | |
| {0x15, VENDOR_CHIPIO_CT_EXTENSIONS_ENABLE, 0}, | |
| {} | |
| }; | |
| /* Other verbs tables. Sends after DSP download. */ | |
| static const struct hda_verb ca0132_init_verbs0[] = { | |
| /* chip init verbs */ | |
| {0x15, 0x70D, 0xF0}, | |
| {0x15, 0x70E, 0xFE}, | |
| {0x15, 0x707, 0x75}, | |
| {0x15, 0x707, 0xD3}, | |
| {0x15, 0x707, 0x09}, | |
| {0x15, 0x707, 0x53}, | |
| {0x15, 0x707, 0xD4}, | |
| {0x15, 0x707, 0xEF}, | |
| {0x15, 0x707, 0x75}, | |
| {0x15, 0x707, 0xD3}, | |
| {0x15, 0x707, 0x09}, | |
| {0x15, 0x707, 0x02}, | |
| {0x15, 0x707, 0x37}, | |
| {0x15, 0x707, 0x78}, | |
| {0x15, 0x53C, 0xCE}, | |
| {0x15, 0x575, 0xC9}, | |
| {0x15, 0x53D, 0xCE}, | |
| {0x15, 0x5B7, 0xC9}, | |
| {0x15, 0x70D, 0xE8}, | |
| {0x15, 0x70E, 0xFE}, | |
| {0x15, 0x707, 0x02}, | |
| {0x15, 0x707, 0x68}, | |
| {0x15, 0x707, 0x62}, | |
| {0x15, 0x53A, 0xCE}, | |
| {0x15, 0x546, 0xC9}, | |
| {0x15, 0x53B, 0xCE}, | |
| {0x15, 0x5E8, 0xC9}, | |
| {} | |
| }; | |
| /* Extra init verbs for desktop cards. */ | |
| static const struct hda_verb ca0132_init_verbs1[] = { | |
| {0x15, 0x70D, 0x20}, | |
| {0x15, 0x70E, 0x19}, | |
| {0x15, 0x707, 0x00}, | |
| {0x15, 0x539, 0xCE}, | |
| {0x15, 0x546, 0xC9}, | |
| {0x15, 0x70D, 0xB7}, | |
| {0x15, 0x70E, 0x09}, | |
| {0x15, 0x707, 0x10}, | |
| {0x15, 0x70D, 0xAF}, | |
| {0x15, 0x70E, 0x09}, | |
| {0x15, 0x707, 0x01}, | |
| {0x15, 0x707, 0x05}, | |
| {0x15, 0x70D, 0x73}, | |
| {0x15, 0x70E, 0x09}, | |
| {0x15, 0x707, 0x14}, | |
| {0x15, 0x6FF, 0xC4}, | |
| {} | |
| }; | |
| static void ca0132_init_chip(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| int num_fx; | |
| int i; | |
| unsigned int on; | |
| mutex_init(&spec->chipio_mutex); | |
| /* | |
| * The Windows driver always does this upon startup, which seems to | |
| * clear out any previous configuration. This should help issues where | |
| * a boot into Windows prior to a boot into Linux breaks things. Also, | |
| * Windows always sends the reset twice. | |
| */ | |
| if (ca0132_use_alt_functions(spec)) { | |
| chipio_set_control_flag(codec, CONTROL_FLAG_IDLE_ENABLE, 0); | |
| chipio_write_no_mutex(codec, 0x18b0a4, 0x000000c2); | |
| snd_hda_codec_write(codec, codec->core.afg, 0, | |
| AC_VERB_SET_CODEC_RESET, 0); | |
| snd_hda_codec_write(codec, codec->core.afg, 0, | |
| AC_VERB_SET_CODEC_RESET, 0); | |
| } | |
| spec->cur_out_type = SPEAKER_OUT; | |
| if (!ca0132_use_alt_functions(spec)) | |
| spec->cur_mic_type = DIGITAL_MIC; | |
| else | |
| spec->cur_mic_type = REAR_MIC; | |
| spec->cur_mic_boost = 0; | |
| for (i = 0; i < VNODES_COUNT; i++) { | |
| spec->vnode_lvol[i] = 0x5a; | |
| spec->vnode_rvol[i] = 0x5a; | |
| spec->vnode_lswitch[i] = 0; | |
| spec->vnode_rswitch[i] = 0; | |
| } | |
| /* | |
| * Default states for effects are in ca0132_effects[]. | |
| */ | |
| num_fx = OUT_EFFECTS_COUNT + IN_EFFECTS_COUNT; | |
| for (i = 0; i < num_fx; i++) { | |
| on = (unsigned int)ca0132_effects[i].reqs[0]; | |
| spec->effects_switch[i] = on ? 1 : 0; | |
| } | |
| /* | |
| * Sets defaults for the effect slider controls, only for alternative | |
| * ca0132 codecs. Also sets x-bass crossover frequency to 80hz. | |
| */ | |
| if (ca0132_use_alt_controls(spec)) { | |
| /* Set speakers to default to full range. */ | |
| spec->speaker_range_val[0] = 1; | |
| spec->speaker_range_val[1] = 1; | |
| spec->xbass_xover_freq = 8; | |
| for (i = 0; i < EFFECT_LEVEL_SLIDERS; i++) | |
| spec->fx_ctl_val[i] = effect_slider_defaults[i]; | |
| spec->bass_redirect_xover_freq = 8; | |
| } | |
| spec->voicefx_val = 0; | |
| spec->effects_switch[PLAY_ENHANCEMENT - EFFECT_START_NID] = 1; | |
| spec->effects_switch[CRYSTAL_VOICE - EFFECT_START_NID] = 0; | |
| /* | |
| * The ZxR doesn't have a front panel header, and it's line-in is on | |
| * the daughter board. So, there is no input enum control, and we need | |
| * to make sure that spec->in_enum_val is set properly. | |
| */ | |
| if (ca0132_quirk(spec) == QUIRK_ZXR) | |
| spec->in_enum_val = REAR_MIC; | |
| #ifdef ENABLE_TUNING_CONTROLS | |
| ca0132_init_tuning_defaults(codec); | |
| #endif | |
| } | |
| /* | |
| * Recon3Di exit specific commands. | |
| */ | |
| /* prevents popping noise on shutdown */ | |
| static void r3di_gpio_shutdown(struct hda_codec *codec) | |
| { | |
| snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 0x00); | |
| } | |
| /* | |
| * Sound Blaster Z exit specific commands. | |
| */ | |
| static void sbz_region2_exit(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int i; | |
| for (i = 0; i < 4; i++) | |
| writeb(0x0, spec->mem_base + 0x100); | |
| for (i = 0; i < 8; i++) | |
| writeb(0xb3, spec->mem_base + 0x304); | |
| ca0113_mmio_gpio_set(codec, 0, false); | |
| ca0113_mmio_gpio_set(codec, 1, false); | |
| ca0113_mmio_gpio_set(codec, 4, true); | |
| ca0113_mmio_gpio_set(codec, 5, false); | |
| ca0113_mmio_gpio_set(codec, 7, false); | |
| } | |
| static void sbz_set_pin_ctl_default(struct hda_codec *codec) | |
| { | |
| static const hda_nid_t pins[] = {0x0B, 0x0C, 0x0E, 0x12, 0x13}; | |
| unsigned int i; | |
| snd_hda_codec_write(codec, 0x11, 0, | |
| AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40); | |
| for (i = 0; i < ARRAY_SIZE(pins); i++) | |
| snd_hda_codec_write(codec, pins[i], 0, | |
| AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00); | |
| } | |
| static void ca0132_clear_unsolicited(struct hda_codec *codec) | |
| { | |
| static const hda_nid_t pins[] = {0x0B, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13}; | |
| unsigned int i; | |
| for (i = 0; i < ARRAY_SIZE(pins); i++) { | |
| snd_hda_codec_write(codec, pins[i], 0, | |
| AC_VERB_SET_UNSOLICITED_ENABLE, 0x00); | |
| } | |
| } | |
| /* On shutdown, sends commands in sets of three */ | |
| static void sbz_gpio_shutdown_commands(struct hda_codec *codec, int dir, | |
| int mask, int data) | |
| { | |
| if (dir >= 0) | |
| snd_hda_codec_write(codec, 0x01, 0, | |
| AC_VERB_SET_GPIO_DIRECTION, dir); | |
| if (mask >= 0) | |
| snd_hda_codec_write(codec, 0x01, 0, | |
| AC_VERB_SET_GPIO_MASK, mask); | |
| if (data >= 0) | |
| snd_hda_codec_write(codec, 0x01, 0, | |
| AC_VERB_SET_GPIO_DATA, data); | |
| } | |
| static void zxr_dbpro_power_state_shutdown(struct hda_codec *codec) | |
| { | |
| static const hda_nid_t pins[] = {0x05, 0x0c, 0x09, 0x0e, 0x08, 0x11, 0x01}; | |
| unsigned int i; | |
| for (i = 0; i < ARRAY_SIZE(pins); i++) | |
| snd_hda_codec_write(codec, pins[i], 0, | |
| AC_VERB_SET_POWER_STATE, 0x03); | |
| } | |
| static void sbz_exit_chip(struct hda_codec *codec) | |
| { | |
| chipio_set_stream_control(codec, 0x03, 0); | |
| chipio_set_stream_control(codec, 0x04, 0); | |
| /* Mess with GPIO */ | |
| sbz_gpio_shutdown_commands(codec, 0x07, 0x07, -1); | |
| sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x05); | |
| sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x01); | |
| chipio_set_stream_control(codec, 0x14, 0); | |
| chipio_set_stream_control(codec, 0x0C, 0); | |
| chipio_set_conn_rate(codec, 0x41, SR_192_000); | |
| chipio_set_conn_rate(codec, 0x91, SR_192_000); | |
| chipio_write(codec, 0x18a020, 0x00000083); | |
| sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x03); | |
| sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x07); | |
| sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x06); | |
| chipio_set_stream_control(codec, 0x0C, 0); | |
| chipio_set_control_param(codec, 0x0D, 0x24); | |
| ca0132_clear_unsolicited(codec); | |
| sbz_set_pin_ctl_default(codec); | |
| snd_hda_codec_write(codec, 0x0B, 0, | |
| AC_VERB_SET_EAPD_BTLENABLE, 0x00); | |
| sbz_region2_exit(codec); | |
| } | |
| static void r3d_exit_chip(struct hda_codec *codec) | |
| { | |
| ca0132_clear_unsolicited(codec); | |
| snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00); | |
| snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x5b); | |
| } | |
| static void ae5_exit_chip(struct hda_codec *codec) | |
| { | |
| chipio_set_stream_control(codec, 0x03, 0); | |
| chipio_set_stream_control(codec, 0x04, 0); | |
| ca0113_mmio_command_set(codec, 0x30, 0x32, 0x3f); | |
| ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83); | |
| ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83); | |
| ca0113_mmio_command_set(codec, 0x30, 0x30, 0x00); | |
| ca0113_mmio_command_set(codec, 0x30, 0x2b, 0x00); | |
| ca0113_mmio_command_set(codec, 0x30, 0x2d, 0x00); | |
| ca0113_mmio_gpio_set(codec, 0, false); | |
| ca0113_mmio_gpio_set(codec, 1, false); | |
| snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00); | |
| snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x53); | |
| chipio_set_control_param(codec, CONTROL_PARAM_ASI, 0); | |
| chipio_set_stream_control(codec, 0x18, 0); | |
| chipio_set_stream_control(codec, 0x0c, 0); | |
| snd_hda_codec_write(codec, 0x01, 0, 0x724, 0x83); | |
| } | |
| static void ae7_exit_chip(struct hda_codec *codec) | |
| { | |
| chipio_set_stream_control(codec, 0x18, 0); | |
| chipio_set_stream_source_dest(codec, 0x21, 0xc8, 0xc8); | |
| chipio_set_stream_channels(codec, 0x21, 0); | |
| chipio_set_control_param(codec, CONTROL_PARAM_NODE_ID, 0x09); | |
| chipio_set_control_param(codec, 0x20, 0x01); | |
| chipio_set_control_param(codec, CONTROL_PARAM_ASI, 0); | |
| chipio_set_stream_control(codec, 0x18, 0); | |
| chipio_set_stream_control(codec, 0x0c, 0); | |
| ca0113_mmio_command_set(codec, 0x30, 0x2b, 0x00); | |
| snd_hda_codec_write(codec, 0x15, 0, 0x724, 0x83); | |
| ca0113_mmio_command_set_type2(codec, 0x48, 0x07, 0x83); | |
| ca0113_mmio_command_set(codec, 0x30, 0x30, 0x00); | |
| ca0113_mmio_command_set(codec, 0x30, 0x2e, 0x00); | |
| ca0113_mmio_gpio_set(codec, 0, false); | |
| ca0113_mmio_gpio_set(codec, 1, false); | |
| ca0113_mmio_command_set(codec, 0x30, 0x32, 0x3f); | |
| snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00); | |
| snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x53); | |
| } | |
| static void zxr_exit_chip(struct hda_codec *codec) | |
| { | |
| chipio_set_stream_control(codec, 0x03, 0); | |
| chipio_set_stream_control(codec, 0x04, 0); | |
| chipio_set_stream_control(codec, 0x14, 0); | |
| chipio_set_stream_control(codec, 0x0C, 0); | |
| chipio_set_conn_rate(codec, 0x41, SR_192_000); | |
| chipio_set_conn_rate(codec, 0x91, SR_192_000); | |
| chipio_write(codec, 0x18a020, 0x00000083); | |
| snd_hda_codec_write(codec, 0x01, 0, 0x793, 0x00); | |
| snd_hda_codec_write(codec, 0x01, 0, 0x794, 0x53); | |
| ca0132_clear_unsolicited(codec); | |
| sbz_set_pin_ctl_default(codec); | |
| snd_hda_codec_write(codec, 0x0B, 0, AC_VERB_SET_EAPD_BTLENABLE, 0x00); | |
| ca0113_mmio_gpio_set(codec, 5, false); | |
| ca0113_mmio_gpio_set(codec, 2, false); | |
| ca0113_mmio_gpio_set(codec, 3, false); | |
| ca0113_mmio_gpio_set(codec, 0, false); | |
| ca0113_mmio_gpio_set(codec, 4, true); | |
| ca0113_mmio_gpio_set(codec, 0, true); | |
| ca0113_mmio_gpio_set(codec, 5, true); | |
| ca0113_mmio_gpio_set(codec, 2, false); | |
| ca0113_mmio_gpio_set(codec, 3, false); | |
| } | |
| static void ca0132_exit_chip(struct hda_codec *codec) | |
| { | |
| /* put any chip cleanup stuffs here. */ | |
| if (dspload_is_loaded(codec)) | |
| dsp_reset(codec); | |
| } | |
| /* | |
| * This fixes a problem that was hard to reproduce. Very rarely, I would | |
| * boot up, and there would be no sound, but the DSP indicated it had loaded | |
| * properly. I did a few memory dumps to see if anything was different, and | |
| * there were a few areas of memory uninitialized with a1a2a3a4. This function | |
| * checks if those areas are uninitialized, and if they are, it'll attempt to | |
| * reload the card 3 times. Usually it fixes by the second. | |
| */ | |
| static void sbz_dsp_startup_check(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int dsp_data_check[4]; | |
| unsigned int cur_address = 0x390; | |
| unsigned int i; | |
| unsigned int failure = 0; | |
| unsigned int reload = 3; | |
| if (spec->startup_check_entered) | |
| return; | |
| spec->startup_check_entered = true; | |
| for (i = 0; i < 4; i++) { | |
| chipio_read(codec, cur_address, &dsp_data_check[i]); | |
| cur_address += 0x4; | |
| } | |
| for (i = 0; i < 4; i++) { | |
| if (dsp_data_check[i] == 0xa1a2a3a4) | |
| failure = 1; | |
| } | |
| codec_dbg(codec, "Startup Check: %d ", failure); | |
| if (failure) | |
| codec_info(codec, "DSP not initialized properly. Attempting to fix."); | |
| /* | |
| * While the failure condition is true, and we haven't reached our | |
| * three reload limit, continue trying to reload the driver and | |
| * fix the issue. | |
| */ | |
| while (failure && (reload != 0)) { | |
| codec_info(codec, "Reloading... Tries left: %d", reload); | |
| sbz_exit_chip(codec); | |
| spec->dsp_state = DSP_DOWNLOAD_INIT; | |
| snd_hda_codec_init(codec); | |
| failure = 0; | |
| for (i = 0; i < 4; i++) { | |
| chipio_read(codec, cur_address, &dsp_data_check[i]); | |
| cur_address += 0x4; | |
| } | |
| for (i = 0; i < 4; i++) { | |
| if (dsp_data_check[i] == 0xa1a2a3a4) | |
| failure = 1; | |
| } | |
| reload--; | |
| } | |
| if (!failure && reload < 3) | |
| codec_info(codec, "DSP fixed."); | |
| if (!failure) | |
| return; | |
| codec_info(codec, "DSP failed to initialize properly. Either try a full shutdown or a suspend to clear the internal memory."); | |
| } | |
| /* | |
| * This is for the extra volume verbs 0x797 (left) and 0x798 (right). These add | |
| * extra precision for decibel values. If you had the dB value in floating point | |
| * you would take the value after the decimal point, multiply by 64, and divide | |
| * by 2. So for 8.59, it's (59 * 64) / 100. Useful if someone wanted to | |
| * implement fixed point or floating point dB volumes. For now, I'll set them | |
| * to 0 just incase a value has lingered from a boot into Windows. | |
| */ | |
| static void ca0132_alt_vol_setup(struct hda_codec *codec) | |
| { | |
| snd_hda_codec_write(codec, 0x02, 0, 0x797, 0x00); | |
| snd_hda_codec_write(codec, 0x02, 0, 0x798, 0x00); | |
| snd_hda_codec_write(codec, 0x03, 0, 0x797, 0x00); | |
| snd_hda_codec_write(codec, 0x03, 0, 0x798, 0x00); | |
| snd_hda_codec_write(codec, 0x04, 0, 0x797, 0x00); | |
| snd_hda_codec_write(codec, 0x04, 0, 0x798, 0x00); | |
| snd_hda_codec_write(codec, 0x07, 0, 0x797, 0x00); | |
| snd_hda_codec_write(codec, 0x07, 0, 0x798, 0x00); | |
| } | |
| /* | |
| * Extra commands that don't really fit anywhere else. | |
| */ | |
| static void sbz_pre_dsp_setup(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| writel(0x00820680, spec->mem_base + 0x01C); | |
| writel(0x00820680, spec->mem_base + 0x01C); | |
| chipio_write(codec, 0x18b0a4, 0x000000c2); | |
| snd_hda_codec_write(codec, 0x11, 0, | |
| AC_VERB_SET_PIN_WIDGET_CONTROL, 0x44); | |
| } | |
| static void r3d_pre_dsp_setup(struct hda_codec *codec) | |
| { | |
| chipio_write(codec, 0x18b0a4, 0x000000c2); | |
| chipio_8051_write_exram(codec, 0x1c1e, 0x5b); | |
| snd_hda_codec_write(codec, 0x11, 0, | |
| AC_VERB_SET_PIN_WIDGET_CONTROL, 0x44); | |
| } | |
| static void r3di_pre_dsp_setup(struct hda_codec *codec) | |
| { | |
| chipio_write(codec, 0x18b0a4, 0x000000c2); | |
| chipio_8051_write_exram(codec, 0x1c1e, 0x5b); | |
| chipio_8051_write_exram(codec, 0x1920, 0x00); | |
| chipio_8051_write_exram(codec, 0x1921, 0x40); | |
| snd_hda_codec_write(codec, 0x11, 0, | |
| AC_VERB_SET_PIN_WIDGET_CONTROL, 0x04); | |
| } | |
| /* | |
| * The ZxR seems to use alternative DAC's for the surround channels, which | |
| * require PLL PMU setup for the clock rate, I'm guessing. Without setting | |
| * this up, we get no audio out of the surround jacks. | |
| */ | |
| static void zxr_pre_dsp_setup(struct hda_codec *codec) | |
| { | |
| static const unsigned int addr[] = { 0x43, 0x40, 0x41, 0x42, 0x45 }; | |
| static const unsigned int data[] = { 0x08, 0x0c, 0x0b, 0x07, 0x0d }; | |
| unsigned int i; | |
| chipio_write(codec, 0x189000, 0x0001f100); | |
| msleep(50); | |
| chipio_write(codec, 0x18900c, 0x0001f100); | |
| msleep(50); | |
| /* | |
| * This writes a RET instruction at the entry point of the function at | |
| * 0xfa92 in exram. This function seems to have something to do with | |
| * ASI. Might be some way to prevent the card from reconfiguring the | |
| * ASI stuff itself. | |
| */ | |
| chipio_8051_write_exram(codec, 0xfa92, 0x22); | |
| chipio_8051_write_pll_pmu(codec, 0x51, 0x98); | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x725, 0x82); | |
| chipio_set_control_param(codec, CONTROL_PARAM_ASI, 3); | |
| chipio_write(codec, 0x18902c, 0x00000000); | |
| msleep(50); | |
| chipio_write(codec, 0x18902c, 0x00000003); | |
| msleep(50); | |
| for (i = 0; i < ARRAY_SIZE(addr); i++) | |
| chipio_8051_write_pll_pmu(codec, addr[i], data[i]); | |
| } | |
| /* | |
| * These are sent before the DSP is downloaded. Not sure | |
| * what they do, or if they're necessary. Could possibly | |
| * be removed. Figure they're better to leave in. | |
| */ | |
| static const unsigned int ca0113_mmio_init_address_sbz[] = { | |
| 0x400, 0x408, 0x40c, 0x01c, 0xc0c, 0xc00, 0xc04, 0xc0c, 0xc0c, 0xc0c, | |
| 0xc0c, 0xc08, 0xc08, 0xc08, 0xc08, 0xc08, 0xc04 | |
| }; | |
| static const unsigned int ca0113_mmio_init_data_sbz[] = { | |
| 0x00000030, 0x00000000, 0x00000003, 0x00000003, 0x00000003, | |
| 0x00000003, 0x000000c1, 0x000000f1, 0x00000001, 0x000000c7, | |
| 0x000000c1, 0x00000080 | |
| }; | |
| static const unsigned int ca0113_mmio_init_data_zxr[] = { | |
| 0x00000030, 0x00000000, 0x00000000, 0x00000003, 0x00000003, | |
| 0x00000003, 0x00000001, 0x000000f1, 0x00000001, 0x000000c7, | |
| 0x000000c1, 0x00000080 | |
| }; | |
| static const unsigned int ca0113_mmio_init_address_ae5[] = { | |
| 0x400, 0x42c, 0x46c, 0x4ac, 0x4ec, 0x43c, 0x47c, 0x4bc, 0x4fc, 0x408, | |
| 0x100, 0x410, 0x40c, 0x100, 0x100, 0x830, 0x86c, 0x800, 0x86c, 0x800, | |
| 0x804, 0x20c, 0x01c, 0xc0c, 0xc00, 0xc04, 0xc0c, 0xc0c, 0xc0c, 0xc0c, | |
| 0xc08, 0xc08, 0xc08, 0xc08, 0xc08, 0xc04, 0x01c | |
| }; | |
| static const unsigned int ca0113_mmio_init_data_ae5[] = { | |
| 0x00000001, 0x00000000, 0x00000000, 0x00000000, 0x00000000, | |
| 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000001, | |
| 0x00000600, 0x00000014, 0x00000001, 0x0000060f, 0x0000070f, | |
| 0x00000aff, 0x00000000, 0x0000006b, 0x00000001, 0x0000006b, | |
| 0x00000057, 0x00800000, 0x00880680, 0x00000080, 0x00000030, | |
| 0x00000000, 0x00000000, 0x00000003, 0x00000003, 0x00000003, | |
| 0x00000001, 0x000000f1, 0x00000001, 0x000000c7, 0x000000c1, | |
| 0x00000080, 0x00880680 | |
| }; | |
| static void ca0132_mmio_init_sbz(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int tmp[2], i, count, cur_addr; | |
| const unsigned int *addr, *data; | |
| addr = ca0113_mmio_init_address_sbz; | |
| for (i = 0; i < 3; i++) | |
| writel(0x00000000, spec->mem_base + addr[i]); | |
| cur_addr = i; | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_ZXR: | |
| tmp[0] = 0x00880480; | |
| tmp[1] = 0x00000080; | |
| break; | |
| case QUIRK_SBZ: | |
| tmp[0] = 0x00820680; | |
| tmp[1] = 0x00000083; | |
| break; | |
| case QUIRK_R3D: | |
| tmp[0] = 0x00880680; | |
| tmp[1] = 0x00000083; | |
| break; | |
| default: | |
| tmp[0] = 0x00000000; | |
| tmp[1] = 0x00000000; | |
| break; | |
| } | |
| for (i = 0; i < 2; i++) | |
| writel(tmp[i], spec->mem_base + addr[cur_addr + i]); | |
| cur_addr += i; | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_ZXR: | |
| count = ARRAY_SIZE(ca0113_mmio_init_data_zxr); | |
| data = ca0113_mmio_init_data_zxr; | |
| break; | |
| default: | |
| count = ARRAY_SIZE(ca0113_mmio_init_data_sbz); | |
| data = ca0113_mmio_init_data_sbz; | |
| break; | |
| } | |
| for (i = 0; i < count; i++) | |
| writel(data[i], spec->mem_base + addr[cur_addr + i]); | |
| } | |
| static void ca0132_mmio_init_ae5(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| const unsigned int *addr, *data; | |
| unsigned int i, count; | |
| addr = ca0113_mmio_init_address_ae5; | |
| data = ca0113_mmio_init_data_ae5; | |
| count = ARRAY_SIZE(ca0113_mmio_init_data_ae5); | |
| if (ca0132_quirk(spec) == QUIRK_AE7) { | |
| writel(0x00000680, spec->mem_base + 0x1c); | |
| writel(0x00880680, spec->mem_base + 0x1c); | |
| } | |
| for (i = 0; i < count; i++) { | |
| /* | |
| * AE-7 shares all writes with the AE-5, except that it writes | |
| * a different value to 0x20c. | |
| */ | |
| if (i == 21 && ca0132_quirk(spec) == QUIRK_AE7) { | |
| writel(0x00800001, spec->mem_base + addr[i]); | |
| continue; | |
| } | |
| writel(data[i], spec->mem_base + addr[i]); | |
| } | |
| if (ca0132_quirk(spec) == QUIRK_AE5) | |
| writel(0x00880680, spec->mem_base + 0x1c); | |
| } | |
| static void ca0132_mmio_init(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_R3D: | |
| case QUIRK_SBZ: | |
| case QUIRK_ZXR: | |
| ca0132_mmio_init_sbz(codec); | |
| break; | |
| case QUIRK_AE5: | |
| ca0132_mmio_init_ae5(codec); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static const unsigned int ca0132_ae5_register_set_addresses[] = { | |
| 0x304, 0x304, 0x304, 0x304, 0x100, 0x304, 0x100, 0x304, 0x100, 0x304, | |
| 0x100, 0x304, 0x86c, 0x800, 0x86c, 0x800, 0x804 | |
| }; | |
| static const unsigned char ca0132_ae5_register_set_data[] = { | |
| 0x0f, 0x0e, 0x1f, 0x0c, 0x3f, 0x08, 0x7f, 0x00, 0xff, 0x00, 0x6b, | |
| 0x01, 0x6b, 0x57 | |
| }; | |
| /* | |
| * This function writes to some SFR's, does some region2 writes, and then | |
| * eventually resets the codec with the 0x7ff verb. Not quite sure why it does | |
| * what it does. | |
| */ | |
| static void ae5_register_set(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| unsigned int count = ARRAY_SIZE(ca0132_ae5_register_set_addresses); | |
| const unsigned int *addr = ca0132_ae5_register_set_addresses; | |
| const unsigned char *data = ca0132_ae5_register_set_data; | |
| unsigned int i, cur_addr; | |
| unsigned char tmp[3]; | |
| if (ca0132_quirk(spec) == QUIRK_AE7) | |
| chipio_8051_write_pll_pmu(codec, 0x41, 0xc8); | |
| chipio_8051_write_direct(codec, 0x93, 0x10); | |
| chipio_8051_write_pll_pmu(codec, 0x44, 0xc2); | |
| if (ca0132_quirk(spec) == QUIRK_AE7) { | |
| tmp[0] = 0x03; | |
| tmp[1] = 0x03; | |
| tmp[2] = 0x07; | |
| } else { | |
| tmp[0] = 0x0f; | |
| tmp[1] = 0x0f; | |
| tmp[2] = 0x0f; | |
| } | |
| for (i = cur_addr = 0; i < 3; i++, cur_addr++) | |
| writeb(tmp[i], spec->mem_base + addr[cur_addr]); | |
| /* | |
| * First writes are in single bytes, final are in 4 bytes. So, we use | |
| * writeb, then writel. | |
| */ | |
| for (i = 0; cur_addr < 12; i++, cur_addr++) | |
| writeb(data[i], spec->mem_base + addr[cur_addr]); | |
| for (; cur_addr < count; i++, cur_addr++) | |
| writel(data[i], spec->mem_base + addr[cur_addr]); | |
| writel(0x00800001, spec->mem_base + 0x20c); | |
| if (ca0132_quirk(spec) == QUIRK_AE7) { | |
| ca0113_mmio_command_set_type2(codec, 0x48, 0x07, 0x83); | |
| ca0113_mmio_command_set(codec, 0x30, 0x2e, 0x3f); | |
| } else { | |
| ca0113_mmio_command_set(codec, 0x30, 0x2d, 0x3f); | |
| } | |
| chipio_8051_write_direct(codec, 0x90, 0x00); | |
| chipio_8051_write_direct(codec, 0x90, 0x10); | |
| if (ca0132_quirk(spec) == QUIRK_AE5) | |
| ca0113_mmio_command_set(codec, 0x48, 0x07, 0x83); | |
| } | |
| /* | |
| * Extra init functions for alternative ca0132 codecs. Done | |
| * here so they don't clutter up the main ca0132_init function | |
| * anymore than they have to. | |
| */ | |
| static void ca0132_alt_init(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| ca0132_alt_vol_setup(codec); | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| codec_dbg(codec, "SBZ alt_init"); | |
| ca0132_gpio_init(codec); | |
| sbz_pre_dsp_setup(codec); | |
| snd_hda_sequence_write(codec, spec->chip_init_verbs); | |
| snd_hda_sequence_write(codec, spec->desktop_init_verbs); | |
| break; | |
| case QUIRK_R3DI: | |
| codec_dbg(codec, "R3DI alt_init"); | |
| ca0132_gpio_init(codec); | |
| ca0132_gpio_setup(codec); | |
| r3di_gpio_dsp_status_set(codec, R3DI_DSP_DOWNLOADING); | |
| r3di_pre_dsp_setup(codec); | |
| snd_hda_sequence_write(codec, spec->chip_init_verbs); | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, 0x6FF, 0xC4); | |
| break; | |
| case QUIRK_R3D: | |
| r3d_pre_dsp_setup(codec); | |
| snd_hda_sequence_write(codec, spec->chip_init_verbs); | |
| snd_hda_sequence_write(codec, spec->desktop_init_verbs); | |
| break; | |
| case QUIRK_AE5: | |
| ca0132_gpio_init(codec); | |
| chipio_8051_write_pll_pmu(codec, 0x49, 0x88); | |
| chipio_write(codec, 0x18b030, 0x00000020); | |
| snd_hda_sequence_write(codec, spec->chip_init_verbs); | |
| snd_hda_sequence_write(codec, spec->desktop_init_verbs); | |
| ca0113_mmio_command_set(codec, 0x30, 0x32, 0x3f); | |
| break; | |
| case QUIRK_AE7: | |
| ca0132_gpio_init(codec); | |
| chipio_8051_write_pll_pmu(codec, 0x49, 0x88); | |
| snd_hda_sequence_write(codec, spec->chip_init_verbs); | |
| snd_hda_sequence_write(codec, spec->desktop_init_verbs); | |
| chipio_write(codec, 0x18b008, 0x000000f8); | |
| chipio_write(codec, 0x18b008, 0x000000f0); | |
| chipio_write(codec, 0x18b030, 0x00000020); | |
| ca0113_mmio_command_set(codec, 0x30, 0x32, 0x3f); | |
| break; | |
| case QUIRK_ZXR: | |
| chipio_8051_write_pll_pmu(codec, 0x49, 0x88); | |
| snd_hda_sequence_write(codec, spec->chip_init_verbs); | |
| snd_hda_sequence_write(codec, spec->desktop_init_verbs); | |
| zxr_pre_dsp_setup(codec); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| static int ca0132_init(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| struct auto_pin_cfg *cfg = &spec->autocfg; | |
| int i; | |
| bool dsp_loaded; | |
| /* | |
| * If the DSP is already downloaded, and init has been entered again, | |
| * there's only two reasons for it. One, the codec has awaken from a | |
| * suspended state, and in that case dspload_is_loaded will return | |
| * false, and the init will be ran again. The other reason it gets | |
| * re entered is on startup for some reason it triggers a suspend and | |
| * resume state. In this case, it will check if the DSP is downloaded, | |
| * and not run the init function again. For codecs using alt_functions, | |
| * it will check if the DSP is loaded properly. | |
| */ | |
| if (spec->dsp_state == DSP_DOWNLOADED) { | |
| dsp_loaded = dspload_is_loaded(codec); | |
| if (!dsp_loaded) { | |
| spec->dsp_reload = true; | |
| spec->dsp_state = DSP_DOWNLOAD_INIT; | |
| } else { | |
| if (ca0132_quirk(spec) == QUIRK_SBZ) | |
| sbz_dsp_startup_check(codec); | |
| return 0; | |
| } | |
| } | |
| if (spec->dsp_state != DSP_DOWNLOAD_FAILED) | |
| spec->dsp_state = DSP_DOWNLOAD_INIT; | |
| spec->curr_chip_addx = INVALID_CHIP_ADDRESS; | |
| if (ca0132_use_pci_mmio(spec)) | |
| ca0132_mmio_init(codec); | |
| CLASS(snd_hda_power_pm, pm)(codec); | |
| if (ca0132_quirk(spec) == QUIRK_AE5 || ca0132_quirk(spec) == QUIRK_AE7) | |
| ae5_register_set(codec); | |
| ca0132_init_params(codec); | |
| ca0132_init_flags(codec); | |
| snd_hda_sequence_write(codec, spec->base_init_verbs); | |
| if (ca0132_use_alt_functions(spec)) | |
| ca0132_alt_init(codec); | |
| ca0132_download_dsp(codec); | |
| ca0132_refresh_widget_caps(codec); | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_R3DI: | |
| case QUIRK_R3D: | |
| r3d_setup_defaults(codec); | |
| break; | |
| case QUIRK_SBZ: | |
| case QUIRK_ZXR: | |
| sbz_setup_defaults(codec); | |
| break; | |
| case QUIRK_AE5: | |
| ae5_setup_defaults(codec); | |
| break; | |
| case QUIRK_AE7: | |
| ae7_setup_defaults(codec); | |
| break; | |
| default: | |
| ca0132_setup_defaults(codec); | |
| ca0132_init_analog_mic2(codec); | |
| ca0132_init_dmic(codec); | |
| break; | |
| } | |
| for (i = 0; i < spec->num_outputs; i++) | |
| init_output(codec, spec->out_pins[i], spec->dacs[0]); | |
| init_output(codec, cfg->dig_out_pins[0], spec->dig_out); | |
| for (i = 0; i < spec->num_inputs; i++) | |
| init_input(codec, spec->input_pins[i], spec->adcs[i]); | |
| init_input(codec, cfg->dig_in_pin, spec->dig_in); | |
| if (!ca0132_use_alt_functions(spec)) { | |
| snd_hda_sequence_write(codec, spec->chip_init_verbs); | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_PARAM_EX_ID_SET, 0x0D); | |
| snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0, | |
| VENDOR_CHIPIO_PARAM_EX_VALUE_SET, 0x20); | |
| } | |
| if (ca0132_quirk(spec) == QUIRK_SBZ) | |
| ca0132_gpio_setup(codec); | |
| snd_hda_sequence_write(codec, spec->spec_init_verbs); | |
| if (ca0132_use_alt_functions(spec)) { | |
| ca0132_alt_select_out(codec); | |
| ca0132_alt_select_in(codec); | |
| } else { | |
| ca0132_select_out(codec); | |
| ca0132_select_mic(codec); | |
| } | |
| snd_hda_jack_report_sync(codec); | |
| /* | |
| * Re set the PlayEnhancement switch on a resume event, because the | |
| * controls will not be reloaded. | |
| */ | |
| if (spec->dsp_reload) { | |
| spec->dsp_reload = false; | |
| ca0132_pe_switch_set(codec); | |
| } | |
| return 0; | |
| } | |
| static int dbpro_init(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| struct auto_pin_cfg *cfg = &spec->autocfg; | |
| unsigned int i; | |
| init_output(codec, cfg->dig_out_pins[0], spec->dig_out); | |
| init_input(codec, cfg->dig_in_pin, spec->dig_in); | |
| for (i = 0; i < spec->num_inputs; i++) | |
| init_input(codec, spec->input_pins[i], spec->adcs[i]); | |
| return 0; | |
| } | |
| static void ca0132_free(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| cancel_delayed_work_sync(&spec->unsol_hp_work); | |
| snd_hda_power_up(codec); | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| sbz_exit_chip(codec); | |
| break; | |
| case QUIRK_ZXR: | |
| zxr_exit_chip(codec); | |
| break; | |
| case QUIRK_R3D: | |
| r3d_exit_chip(codec); | |
| break; | |
| case QUIRK_AE5: | |
| ae5_exit_chip(codec); | |
| break; | |
| case QUIRK_AE7: | |
| ae7_exit_chip(codec); | |
| break; | |
| case QUIRK_R3DI: | |
| r3di_gpio_shutdown(codec); | |
| break; | |
| default: | |
| break; | |
| } | |
| snd_hda_sequence_write(codec, spec->base_exit_verbs); | |
| ca0132_exit_chip(codec); | |
| snd_hda_power_down(codec); | |
| #ifdef CONFIG_PCI | |
| if (spec->mem_base) | |
| pci_iounmap(codec->bus->pci, spec->mem_base); | |
| #endif | |
| kfree(spec->spec_init_verbs); | |
| kfree(codec->spec); | |
| codec->spec = NULL; | |
| } | |
| static void dbpro_free(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| zxr_dbpro_power_state_shutdown(codec); | |
| kfree(spec->spec_init_verbs); | |
| kfree(codec->spec); | |
| codec->spec = NULL; | |
| } | |
| static void ca0132_config(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| spec->dacs[0] = 0x2; | |
| spec->dacs[1] = 0x3; | |
| spec->dacs[2] = 0x4; | |
| spec->multiout.dac_nids = spec->dacs; | |
| spec->multiout.num_dacs = 3; | |
| if (!ca0132_use_alt_functions(spec)) | |
| spec->multiout.max_channels = 2; | |
| else | |
| spec->multiout.max_channels = 6; | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_ALIENWARE: | |
| codec_dbg(codec, "%s: QUIRK_ALIENWARE applied.\n", __func__); | |
| snd_hda_apply_pincfgs(codec, alienware_pincfgs); | |
| break; | |
| case QUIRK_SBZ: | |
| codec_dbg(codec, "%s: QUIRK_SBZ applied.\n", __func__); | |
| snd_hda_apply_pincfgs(codec, sbz_pincfgs); | |
| break; | |
| case QUIRK_ZXR: | |
| codec_dbg(codec, "%s: QUIRK_ZXR applied.\n", __func__); | |
| snd_hda_apply_pincfgs(codec, zxr_pincfgs); | |
| break; | |
| case QUIRK_R3D: | |
| codec_dbg(codec, "%s: QUIRK_R3D applied.\n", __func__); | |
| snd_hda_apply_pincfgs(codec, r3d_pincfgs); | |
| break; | |
| case QUIRK_R3DI: | |
| codec_dbg(codec, "%s: QUIRK_R3DI applied.\n", __func__); | |
| snd_hda_apply_pincfgs(codec, r3di_pincfgs); | |
| break; | |
| case QUIRK_AE5: | |
| codec_dbg(codec, "%s: QUIRK_AE5 applied.\n", __func__); | |
| snd_hda_apply_pincfgs(codec, ae5_pincfgs); | |
| break; | |
| case QUIRK_AE7: | |
| codec_dbg(codec, "%s: QUIRK_AE7 applied.\n", __func__); | |
| snd_hda_apply_pincfgs(codec, ae7_pincfgs); | |
| break; | |
| default: | |
| break; | |
| } | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_ALIENWARE: | |
| spec->num_outputs = 2; | |
| spec->out_pins[0] = 0x0b; /* speaker out */ | |
| spec->out_pins[1] = 0x0f; | |
| spec->shared_out_nid = 0x2; | |
| spec->unsol_tag_hp = 0x0f; | |
| spec->adcs[0] = 0x7; /* digital mic / analog mic1 */ | |
| spec->adcs[1] = 0x8; /* analog mic2 */ | |
| spec->adcs[2] = 0xa; /* what u hear */ | |
| spec->num_inputs = 3; | |
| spec->input_pins[0] = 0x12; | |
| spec->input_pins[1] = 0x11; | |
| spec->input_pins[2] = 0x13; | |
| spec->shared_mic_nid = 0x7; | |
| spec->unsol_tag_amic1 = 0x11; | |
| break; | |
| case QUIRK_SBZ: | |
| case QUIRK_R3D: | |
| spec->num_outputs = 2; | |
| spec->out_pins[0] = 0x0B; /* Line out */ | |
| spec->out_pins[1] = 0x0F; /* Rear headphone out */ | |
| spec->out_pins[2] = 0x10; /* Front Headphone / Center/LFE*/ | |
| spec->out_pins[3] = 0x11; /* Rear surround */ | |
| spec->shared_out_nid = 0x2; | |
| spec->unsol_tag_hp = spec->out_pins[1]; | |
| spec->unsol_tag_front_hp = spec->out_pins[2]; | |
| spec->adcs[0] = 0x7; /* Rear Mic / Line-in */ | |
| spec->adcs[1] = 0x8; /* Front Mic, but only if no DSP */ | |
| spec->adcs[2] = 0xa; /* what u hear */ | |
| spec->num_inputs = 2; | |
| spec->input_pins[0] = 0x12; /* Rear Mic / Line-in */ | |
| spec->input_pins[1] = 0x13; /* What U Hear */ | |
| spec->shared_mic_nid = 0x7; | |
| spec->unsol_tag_amic1 = spec->input_pins[0]; | |
| /* SPDIF I/O */ | |
| spec->dig_out = 0x05; | |
| spec->multiout.dig_out_nid = spec->dig_out; | |
| spec->dig_in = 0x09; | |
| break; | |
| case QUIRK_ZXR: | |
| spec->num_outputs = 2; | |
| spec->out_pins[0] = 0x0B; /* Line out */ | |
| spec->out_pins[1] = 0x0F; /* Rear headphone out */ | |
| spec->out_pins[2] = 0x10; /* Center/LFE */ | |
| spec->out_pins[3] = 0x11; /* Rear surround */ | |
| spec->shared_out_nid = 0x2; | |
| spec->unsol_tag_hp = spec->out_pins[1]; | |
| spec->unsol_tag_front_hp = spec->out_pins[2]; | |
| spec->adcs[0] = 0x7; /* Rear Mic / Line-in */ | |
| spec->adcs[1] = 0x8; /* Not connected, no front mic */ | |
| spec->adcs[2] = 0xa; /* what u hear */ | |
| spec->num_inputs = 2; | |
| spec->input_pins[0] = 0x12; /* Rear Mic / Line-in */ | |
| spec->input_pins[1] = 0x13; /* What U Hear */ | |
| spec->shared_mic_nid = 0x7; | |
| spec->unsol_tag_amic1 = spec->input_pins[0]; | |
| break; | |
| case QUIRK_ZXR_DBPRO: | |
| spec->adcs[0] = 0x8; /* ZxR DBPro Aux In */ | |
| spec->num_inputs = 1; | |
| spec->input_pins[0] = 0x11; /* RCA Line-in */ | |
| spec->dig_out = 0x05; | |
| spec->multiout.dig_out_nid = spec->dig_out; | |
| spec->dig_in = 0x09; | |
| break; | |
| case QUIRK_AE5: | |
| case QUIRK_AE7: | |
| spec->num_outputs = 2; | |
| spec->out_pins[0] = 0x0B; /* Line out */ | |
| spec->out_pins[1] = 0x11; /* Rear headphone out */ | |
| spec->out_pins[2] = 0x10; /* Front Headphone / Center/LFE*/ | |
| spec->out_pins[3] = 0x0F; /* Rear surround */ | |
| spec->shared_out_nid = 0x2; | |
| spec->unsol_tag_hp = spec->out_pins[1]; | |
| spec->unsol_tag_front_hp = spec->out_pins[2]; | |
| spec->adcs[0] = 0x7; /* Rear Mic / Line-in */ | |
| spec->adcs[1] = 0x8; /* Front Mic, but only if no DSP */ | |
| spec->adcs[2] = 0xa; /* what u hear */ | |
| spec->num_inputs = 2; | |
| spec->input_pins[0] = 0x12; /* Rear Mic / Line-in */ | |
| spec->input_pins[1] = 0x13; /* What U Hear */ | |
| spec->shared_mic_nid = 0x7; | |
| spec->unsol_tag_amic1 = spec->input_pins[0]; | |
| /* SPDIF I/O */ | |
| spec->dig_out = 0x05; | |
| spec->multiout.dig_out_nid = spec->dig_out; | |
| break; | |
| case QUIRK_R3DI: | |
| spec->num_outputs = 2; | |
| spec->out_pins[0] = 0x0B; /* Line out */ | |
| spec->out_pins[1] = 0x0F; /* Rear headphone out */ | |
| spec->out_pins[2] = 0x10; /* Front Headphone / Center/LFE*/ | |
| spec->out_pins[3] = 0x11; /* Rear surround */ | |
| spec->shared_out_nid = 0x2; | |
| spec->unsol_tag_hp = spec->out_pins[1]; | |
| spec->unsol_tag_front_hp = spec->out_pins[2]; | |
| spec->adcs[0] = 0x07; /* Rear Mic / Line-in */ | |
| spec->adcs[1] = 0x08; /* Front Mic, but only if no DSP */ | |
| spec->adcs[2] = 0x0a; /* what u hear */ | |
| spec->num_inputs = 2; | |
| spec->input_pins[0] = 0x12; /* Rear Mic / Line-in */ | |
| spec->input_pins[1] = 0x13; /* What U Hear */ | |
| spec->shared_mic_nid = 0x7; | |
| spec->unsol_tag_amic1 = spec->input_pins[0]; | |
| /* SPDIF I/O */ | |
| spec->dig_out = 0x05; | |
| spec->multiout.dig_out_nid = spec->dig_out; | |
| break; | |
| default: | |
| spec->num_outputs = 2; | |
| spec->out_pins[0] = 0x0b; /* speaker out */ | |
| spec->out_pins[1] = 0x10; /* headphone out */ | |
| spec->shared_out_nid = 0x2; | |
| spec->unsol_tag_hp = spec->out_pins[1]; | |
| spec->adcs[0] = 0x7; /* digital mic / analog mic1 */ | |
| spec->adcs[1] = 0x8; /* analog mic2 */ | |
| spec->adcs[2] = 0xa; /* what u hear */ | |
| spec->num_inputs = 3; | |
| spec->input_pins[0] = 0x12; | |
| spec->input_pins[1] = 0x11; | |
| spec->input_pins[2] = 0x13; | |
| spec->shared_mic_nid = 0x7; | |
| spec->unsol_tag_amic1 = spec->input_pins[0]; | |
| /* SPDIF I/O */ | |
| spec->dig_out = 0x05; | |
| spec->multiout.dig_out_nid = spec->dig_out; | |
| spec->dig_in = 0x09; | |
| break; | |
| } | |
| /* Default HP/Speaker auto-detect from headphone pin verb: enable if the | |
| * pin config indicates presence detect (not AC_DEFCFG_MISC_NO_PRESENCE). | |
| */ | |
| if (spec->unsol_tag_hp && | |
| (snd_hda_query_pin_caps(codec, spec->unsol_tag_hp) & AC_PINCAP_PRES_DETECT) && | |
| !(get_defcfg_misc(snd_hda_codec_get_pincfg(codec, spec->unsol_tag_hp)) & | |
| AC_DEFCFG_MISC_NO_PRESENCE)) | |
| spec->vnode_lswitch[VNID_HP_ASEL - VNODE_START_NID] = 1; | |
| } | |
| static int ca0132_prepare_verbs(struct hda_codec *codec) | |
| { | |
| /* Verbs + terminator (an empty element) */ | |
| #define NUM_SPEC_VERBS 2 | |
| struct ca0132_spec *spec = codec->spec; | |
| spec->chip_init_verbs = ca0132_init_verbs0; | |
| /* | |
| * Since desktop cards use pci_mmio, this can be used to determine | |
| * whether or not to use these verbs instead of a separate bool. | |
| */ | |
| if (ca0132_use_pci_mmio(spec)) | |
| spec->desktop_init_verbs = ca0132_init_verbs1; | |
| spec->spec_init_verbs = kzalloc_objs(struct hda_verb, NUM_SPEC_VERBS); | |
| if (!spec->spec_init_verbs) | |
| return -ENOMEM; | |
| /* config EAPD */ | |
| spec->spec_init_verbs[0].nid = 0x0b; | |
| spec->spec_init_verbs[0].param = 0x78D; | |
| spec->spec_init_verbs[0].verb = 0x00; | |
| /* Previously commented configuration */ | |
| /* | |
| spec->spec_init_verbs[2].nid = 0x0b; | |
| spec->spec_init_verbs[2].param = AC_VERB_SET_EAPD_BTLENABLE; | |
| spec->spec_init_verbs[2].verb = 0x02; | |
| spec->spec_init_verbs[3].nid = 0x10; | |
| spec->spec_init_verbs[3].param = 0x78D; | |
| spec->spec_init_verbs[3].verb = 0x02; | |
| spec->spec_init_verbs[4].nid = 0x10; | |
| spec->spec_init_verbs[4].param = AC_VERB_SET_EAPD_BTLENABLE; | |
| spec->spec_init_verbs[4].verb = 0x02; | |
| */ | |
| /* Terminator: spec->spec_init_verbs[NUM_SPEC_VERBS-1] */ | |
| return 0; | |
| } | |
| /* | |
| * The Sound Blaster ZxR shares the same PCI subsystem ID as some regular | |
| * Sound Blaster Z cards. However, they have different HDA codec subsystem | |
| * ID's. So, we check for the ZxR's subsystem ID, as well as the DBPro | |
| * daughter boards ID. | |
| */ | |
| static void sbz_detect_quirk(struct hda_codec *codec) | |
| { | |
| switch (codec->core.subsystem_id) { | |
| case 0x11020033: | |
| codec->fixup_id = QUIRK_ZXR; | |
| break; | |
| case 0x1102003f: | |
| codec->fixup_id = QUIRK_ZXR_DBPRO; | |
| break; | |
| default: | |
| codec->fixup_id = QUIRK_SBZ; | |
| break; | |
| } | |
| } | |
| static void ca0132_generic_init_hook(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| snd_hda_sequence_write(codec, spec->spec_init_verbs); | |
| } | |
| static int ca0132_generic_probe(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| struct auto_pin_cfg *cfg = &spec->gen.autocfg; | |
| int err; | |
| snd_hda_gen_spec_init(&spec->gen); | |
| snd_hda_apply_pincfgs(codec, ca0132_generic_pincfgs); | |
| ca0132_init_chip(codec); | |
| err = ca0132_prepare_verbs(codec); | |
| if (err < 0) | |
| return err; | |
| err = snd_hda_parse_pin_def_config(codec, cfg, NULL); | |
| if (err < 0) | |
| return err; | |
| err = snd_hda_gen_parse_auto_config(codec, cfg); | |
| if (err < 0) | |
| return err; | |
| spec->gen.init_hook = ca0132_generic_init_hook; | |
| spec->gen.automute_speaker = 0; | |
| spec->gen.automute_lo = 0; | |
| snd_hda_sequence_write(codec, spec->spec_init_verbs); | |
| return 0; | |
| } | |
| static void ca0132_codec_remove(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_GENERIC: | |
| snd_hda_gen_remove(codec); | |
| return; | |
| case QUIRK_ZXR_DBPRO: | |
| return dbpro_free(codec); | |
| default: | |
| return ca0132_free(codec); | |
| } | |
| } | |
| static int ca0132_codec_probe(struct hda_codec *codec, | |
| const struct hda_device_id *id) | |
| { | |
| struct ca0132_spec *spec; | |
| int err; | |
| codec_dbg(codec, "%s\n", __func__); | |
| spec = kzalloc_obj(*spec); | |
| if (!spec) | |
| return -ENOMEM; | |
| codec->spec = spec; | |
| spec->codec = codec; | |
| /* These must be set before any path is taken */ | |
| codec->pcm_format_first = 1; | |
| codec->no_sticky_stream = 1; | |
| /* Detect codec quirk */ | |
| snd_hda_pick_fixup(codec, ca0132_quirk_models, ca0132_quirks, NULL); | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| sbz_detect_quirk(codec); | |
| break; | |
| case QUIRK_GENERIC: | |
| return ca0132_generic_probe(codec); | |
| default: | |
| break; | |
| } | |
| spec->dsp_state = DSP_DOWNLOAD_INIT; | |
| spec->num_mixers = 1; | |
| /* Set which mixers each quirk uses. */ | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| spec->mixers[0] = desktop_mixer; | |
| snd_hda_codec_set_name(codec, "Sound Blaster Z"); | |
| break; | |
| case QUIRK_ZXR: | |
| spec->mixers[0] = desktop_mixer; | |
| snd_hda_codec_set_name(codec, "Sound Blaster ZxR"); | |
| break; | |
| case QUIRK_ZXR_DBPRO: | |
| break; | |
| case QUIRK_R3D: | |
| spec->mixers[0] = desktop_mixer; | |
| snd_hda_codec_set_name(codec, "Recon3D"); | |
| break; | |
| case QUIRK_R3DI: | |
| spec->mixers[0] = r3di_mixer; | |
| snd_hda_codec_set_name(codec, "Recon3Di"); | |
| break; | |
| case QUIRK_AE5: | |
| spec->mixers[0] = desktop_mixer; | |
| snd_hda_codec_set_name(codec, "Sound BlasterX AE-5"); | |
| break; | |
| case QUIRK_AE7: | |
| spec->mixers[0] = desktop_mixer; | |
| snd_hda_codec_set_name(codec, "Sound Blaster AE-7"); | |
| break; | |
| default: | |
| spec->mixers[0] = ca0132_mixer; | |
| break; | |
| } | |
| /* Setup whether or not to use alt functions/controls/pci_mmio */ | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_SBZ: | |
| case QUIRK_R3D: | |
| case QUIRK_AE5: | |
| case QUIRK_AE7: | |
| case QUIRK_ZXR: | |
| spec->use_alt_controls = true; | |
| spec->use_alt_functions = true; | |
| spec->use_pci_mmio = true; | |
| break; | |
| case QUIRK_R3DI: | |
| spec->use_alt_controls = true; | |
| spec->use_alt_functions = true; | |
| spec->use_pci_mmio = false; | |
| break; | |
| default: | |
| spec->use_alt_controls = false; | |
| spec->use_alt_functions = false; | |
| spec->use_pci_mmio = false; | |
| break; | |
| } | |
| #ifdef CONFIG_PCI | |
| if (spec->use_pci_mmio) { | |
| spec->mem_base = pci_iomap(codec->bus->pci, 2, 0xC20); | |
| if (spec->mem_base == NULL) { | |
| codec_warn(codec, "pci_iomap failed! Setting quirk to QUIRK_NONE."); | |
| codec->fixup_id = QUIRK_NONE; | |
| } | |
| } | |
| #endif | |
| spec->base_init_verbs = ca0132_base_init_verbs; | |
| spec->base_exit_verbs = ca0132_base_exit_verbs; | |
| INIT_DELAYED_WORK(&spec->unsol_hp_work, ca0132_unsol_hp_delayed); | |
| ca0132_init_chip(codec); | |
| ca0132_config(codec); | |
| err = ca0132_prepare_verbs(codec); | |
| if (err < 0) | |
| goto error; | |
| err = snd_hda_parse_pin_def_config(codec, &spec->autocfg, NULL); | |
| if (err < 0) | |
| goto error; | |
| ca0132_setup_unsol(codec); | |
| return 0; | |
| error: | |
| ca0132_codec_remove(codec); | |
| return err; | |
| } | |
| static int ca0132_codec_build_controls(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_GENERIC: | |
| return snd_hda_gen_build_controls(codec); | |
| case QUIRK_ZXR_DBPRO: | |
| return dbpro_build_controls(codec); | |
| default: | |
| return ca0132_build_controls(codec); | |
| } | |
| } | |
| static int ca0132_codec_build_pcms(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_GENERIC: | |
| return snd_hda_gen_build_pcms(codec); | |
| case QUIRK_ZXR_DBPRO: | |
| return dbpro_build_pcms(codec); | |
| default: | |
| return ca0132_build_pcms(codec); | |
| } | |
| } | |
| static int ca0132_codec_init(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| switch (ca0132_quirk(spec)) { | |
| case QUIRK_GENERIC: | |
| return snd_hda_gen_init(codec); | |
| case QUIRK_ZXR_DBPRO: | |
| return dbpro_init(codec); | |
| default: | |
| return ca0132_init(codec); | |
| } | |
| } | |
| static int ca0132_codec_suspend(struct hda_codec *codec) | |
| { | |
| struct ca0132_spec *spec = codec->spec; | |
| if (ca0132_quirk(spec) == QUIRK_GENERIC) | |
| return 0; | |
| cancel_delayed_work_sync(&spec->unsol_hp_work); | |
| return 0; | |
| } | |
| static const struct hda_codec_ops ca0132_codec_ops = { | |
| .probe = ca0132_codec_probe, | |
| .remove = ca0132_codec_remove, | |
| .build_controls = ca0132_codec_build_controls, | |
| .build_pcms = ca0132_codec_build_pcms, | |
| .init = ca0132_codec_init, | |
| .unsol_event = snd_hda_jack_unsol_event, | |
| .suspend = ca0132_codec_suspend, | |
| }; | |
| /* | |
| * driver entries | |
| */ | |
| static const struct hda_device_id snd_hda_id_ca0132[] = { | |
| HDA_CODEC_ID(0x11020011, "CA0132"), | |
| {} /* terminator */ | |
| }; | |
| MODULE_DEVICE_TABLE(hdaudio, snd_hda_id_ca0132); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("Creative Sound Core3D codec"); | |
| static struct hda_codec_driver ca0132_driver = { | |
| .id = snd_hda_id_ca0132, | |
| .ops = &ca0132_codec_ops, | |
| }; | |
| module_hda_codec_driver(ca0132_driver); |