| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright 2002-2005, Instant802 Networks, Inc. | |
| * Copyright 2005-2006, Devicescape Software, Inc. | |
| * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> | |
| * Copyright 2008-2010 Johannes Berg <johannes@sipsolutions.net> | |
| * Copyright 2013-2014 Intel Mobile Communications GmbH | |
| * Copyright 2021-2026 Intel Corporation | |
| */ | |
| #include <linux/export.h> | |
| #include <linux/etherdevice.h> | |
| #include <net/mac80211.h> | |
| #include <linux/unaligned.h> | |
| #include "ieee80211_i.h" | |
| #include "rate.h" | |
| #include "mesh.h" | |
| #include "led.h" | |
| #include "wme.h" | |
| void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| int tmp; | |
| skb->pkt_type = IEEE80211_TX_STATUS_MSG; | |
| skb_queue_tail(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS ? | |
| &local->skb_queue : &local->skb_queue_unreliable, skb); | |
| tmp = skb_queue_len(&local->skb_queue) + | |
| skb_queue_len(&local->skb_queue_unreliable); | |
| while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT && | |
| (skb = skb_dequeue(&local->skb_queue_unreliable))) { | |
| ieee80211_free_txskb(hw, skb); | |
| tmp--; | |
| I802_DEBUG_INC(local->tx_status_drop); | |
| } | |
| tasklet_schedule(&local->tasklet); | |
| } | |
| EXPORT_SYMBOL(ieee80211_tx_status_irqsafe); | |
| static void ieee80211_handle_filtered_frame(struct ieee80211_local *local, | |
| struct sta_info *sta, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_hdr *hdr = (void *)skb->data; | |
| int ac; | |
| if (info->flags & (IEEE80211_TX_CTL_NO_PS_BUFFER | | |
| IEEE80211_TX_CTL_AMPDU | | |
| IEEE80211_TX_CTL_HW_80211_ENCAP)) { | |
| ieee80211_free_txskb(&local->hw, skb); | |
| return; | |
| } | |
| /* | |
| * This skb 'survived' a round-trip through the driver, and | |
| * hopefully the driver didn't mangle it too badly. However, | |
| * we can definitely not rely on the control information | |
| * being correct. Clear it so we don't get junk there, and | |
| * indicate that it needs new processing, but must not be | |
| * modified/encrypted again. | |
| */ | |
| memset(&info->control, 0, sizeof(info->control)); | |
| info->control.jiffies = jiffies; | |
| info->control.vif = &sta->sdata->vif; | |
| info->control.flags |= IEEE80211_TX_INTCFL_NEED_TXPROCESSING; | |
| info->flags |= IEEE80211_TX_INTFL_RETRANSMISSION; | |
| info->flags &= ~IEEE80211_TX_TEMPORARY_FLAGS; | |
| sta->deflink.status_stats.filtered++; | |
| /* | |
| * Clear more-data bit on filtered frames, it might be set | |
| * but later frames might time out so it might have to be | |
| * clear again ... It's all rather unlikely (this frame | |
| * should time out first, right?) but let's not confuse | |
| * peers unnecessarily. | |
| */ | |
| if (hdr->frame_control & cpu_to_le16(IEEE80211_FCTL_MOREDATA)) | |
| hdr->frame_control &= ~cpu_to_le16(IEEE80211_FCTL_MOREDATA); | |
| if (ieee80211_is_data_qos(hdr->frame_control)) { | |
| u8 *p = ieee80211_get_qos_ctl(hdr); | |
| int tid = *p & IEEE80211_QOS_CTL_TID_MASK; | |
| /* | |
| * Clear EOSP if set, this could happen e.g. | |
| * if an absence period (us being a P2P GO) | |
| * shortens the SP. | |
| */ | |
| if (*p & IEEE80211_QOS_CTL_EOSP) | |
| *p &= ~IEEE80211_QOS_CTL_EOSP; | |
| ac = ieee80211_ac_from_tid(tid); | |
| } else { | |
| ac = IEEE80211_AC_BE; | |
| } | |
| /* | |
| * Clear the TX filter mask for this STA when sending the next | |
| * packet. If the STA went to power save mode, this will happen | |
| * when it wakes up for the next time. | |
| */ | |
| set_sta_flag(sta, WLAN_STA_CLEAR_PS_FILT); | |
| ieee80211_clear_fast_xmit(sta); | |
| /* | |
| * This code races in the following way: | |
| * | |
| * (1) STA sends frame indicating it will go to sleep and does so | |
| * (2) hardware/firmware adds STA to filter list, passes frame up | |
| * (3) hardware/firmware processes TX fifo and suppresses a frame | |
| * (4) we get TX status before having processed the frame and | |
| * knowing that the STA has gone to sleep. | |
| * | |
| * This is actually quite unlikely even when both those events are | |
| * processed from interrupts coming in quickly after one another or | |
| * even at the same time because we queue both TX status events and | |
| * RX frames to be processed by a tasklet and process them in the | |
| * same order that they were received or TX status last. Hence, there | |
| * is no race as long as the frame RX is processed before the next TX | |
| * status, which drivers can ensure, see below. | |
| * | |
| * Note that this can only happen if the hardware or firmware can | |
| * actually add STAs to the filter list, if this is done by the | |
| * driver in response to set_tim() (which will only reduce the race | |
| * this whole filtering tries to solve, not completely solve it) | |
| * this situation cannot happen. | |
| * | |
| * To completely solve this race drivers need to make sure that they | |
| * (a) don't mix the irq-safe/not irq-safe TX status/RX processing | |
| * functions and | |
| * (b) always process RX events before TX status events if ordering | |
| * can be unknown, for example with different interrupt status | |
| * bits. | |
| * (c) if PS mode transitions are manual (i.e. the flag | |
| * %IEEE80211_HW_AP_LINK_PS is set), always process PS state | |
| * changes before calling TX status events if ordering can be | |
| * unknown. | |
| */ | |
| if (test_sta_flag(sta, WLAN_STA_PS_STA) && | |
| skb_queue_len(&sta->tx_filtered[ac]) < STA_MAX_TX_BUFFER) { | |
| skb_queue_tail(&sta->tx_filtered[ac], skb); | |
| sta_info_recalc_tim(sta); | |
| if (!timer_pending(&local->sta_cleanup)) | |
| mod_timer(&local->sta_cleanup, | |
| round_jiffies(jiffies + | |
| STA_INFO_CLEANUP_INTERVAL)); | |
| return; | |
| } | |
| if (!test_sta_flag(sta, WLAN_STA_PS_STA) && | |
| !(info->flags & IEEE80211_TX_INTFL_RETRIED)) { | |
| /* Software retry the packet once */ | |
| info->flags |= IEEE80211_TX_INTFL_RETRIED; | |
| ieee80211_add_pending_skb(local, skb); | |
| return; | |
| } | |
| ps_dbg_ratelimited(sta->sdata, | |
| "dropped TX filtered frame, queue_len=%d PS=%d @%lu\n", | |
| skb_queue_len(&sta->tx_filtered[ac]), | |
| !!test_sta_flag(sta, WLAN_STA_PS_STA), jiffies); | |
| ieee80211_free_txskb(&local->hw, skb); | |
| } | |
| static void ieee80211_check_pending_bar(struct sta_info *sta, u8 *addr, u8 tid) | |
| { | |
| struct tid_ampdu_tx *tid_tx; | |
| tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]); | |
| if (!tid_tx || !tid_tx->bar_pending) | |
| return; | |
| tid_tx->bar_pending = false; | |
| ieee80211_send_bar(&sta->sdata->vif, addr, tid, tid_tx->failed_bar_ssn); | |
| } | |
| static void ieee80211_frame_acked(struct sta_info *sta, struct sk_buff *skb) | |
| { | |
| struct ieee80211_mgmt *mgmt = (void *) skb->data; | |
| if (ieee80211_is_data_qos(mgmt->frame_control)) { | |
| struct ieee80211_hdr *hdr = (void *) skb->data; | |
| u8 *qc = ieee80211_get_qos_ctl(hdr); | |
| u16 tid = qc[0] & 0xf; | |
| ieee80211_check_pending_bar(sta, hdr->addr1, tid); | |
| } | |
| } | |
| static void ieee80211_set_bar_pending(struct sta_info *sta, u8 tid, u16 ssn) | |
| { | |
| struct tid_ampdu_tx *tid_tx; | |
| tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]); | |
| if (!tid_tx) | |
| return; | |
| tid_tx->failed_bar_ssn = ssn; | |
| tid_tx->bar_pending = true; | |
| } | |
| static int ieee80211_tx_radiotap_len(struct ieee80211_tx_info *info, | |
| struct ieee80211_tx_status *status) | |
| { | |
| struct ieee80211_rate_status *status_rate = NULL; | |
| int len = sizeof(struct ieee80211_radiotap_header); | |
| if (status && status->n_rates) | |
| status_rate = &status->rates[status->n_rates - 1]; | |
| /* IEEE80211_RADIOTAP_RATE rate */ | |
| if (status_rate && !(status_rate->rate_idx.flags & | |
| (RATE_INFO_FLAGS_MCS | | |
| RATE_INFO_FLAGS_DMG | | |
| RATE_INFO_FLAGS_EDMG | | |
| RATE_INFO_FLAGS_VHT_MCS | | |
| RATE_INFO_FLAGS_HE_MCS))) | |
| len += 2; | |
| else if (info->status.rates[0].idx >= 0 && | |
| !(info->status.rates[0].flags & | |
| (IEEE80211_TX_RC_MCS | IEEE80211_TX_RC_VHT_MCS))) | |
| len += 2; | |
| /* IEEE80211_RADIOTAP_TX_FLAGS */ | |
| len += 2; | |
| /* IEEE80211_RADIOTAP_DATA_RETRIES */ | |
| len += 1; | |
| /* IEEE80211_RADIOTAP_MCS | |
| * IEEE80211_RADIOTAP_VHT */ | |
| if (status_rate) { | |
| if (status_rate->rate_idx.flags & RATE_INFO_FLAGS_MCS) | |
| len += 3; | |
| else if (status_rate->rate_idx.flags & RATE_INFO_FLAGS_VHT_MCS) | |
| len = ALIGN(len, 2) + 12; | |
| else if (status_rate->rate_idx.flags & RATE_INFO_FLAGS_HE_MCS) | |
| len = ALIGN(len, 2) + 12; | |
| } else if (info->status.rates[0].idx >= 0) { | |
| if (info->status.rates[0].flags & IEEE80211_TX_RC_MCS) | |
| len += 3; | |
| else if (info->status.rates[0].flags & IEEE80211_TX_RC_VHT_MCS) | |
| len = ALIGN(len, 2) + 12; | |
| } | |
| return len; | |
| } | |
| static void | |
| ieee80211_add_tx_radiotap_header(struct ieee80211_local *local, | |
| struct sk_buff *skb, int retry_count, | |
| int rtap_len, | |
| struct ieee80211_tx_status *status) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | |
| struct ieee80211_radiotap_header *rthdr; | |
| struct ieee80211_rate_status *status_rate = NULL; | |
| unsigned char *pos; | |
| u16 legacy_rate = 0; | |
| u16 txflags; | |
| if (status && status->n_rates) | |
| status_rate = &status->rates[status->n_rates - 1]; | |
| rthdr = skb_push(skb, rtap_len); | |
| memset(rthdr, 0, rtap_len); | |
| rthdr->it_len = cpu_to_le16(rtap_len); | |
| rthdr->it_present = | |
| cpu_to_le32(BIT(IEEE80211_RADIOTAP_TX_FLAGS) | | |
| BIT(IEEE80211_RADIOTAP_DATA_RETRIES)); | |
| pos = (unsigned char *)(rthdr + 1); | |
| /* | |
| * XXX: Once radiotap gets the bitmap reset thing the vendor | |
| * extensions proposal contains, we can actually report | |
| * the whole set of tries we did. | |
| */ | |
| /* IEEE80211_RADIOTAP_RATE */ | |
| if (status_rate) { | |
| if (!(status_rate->rate_idx.flags & | |
| (RATE_INFO_FLAGS_MCS | | |
| RATE_INFO_FLAGS_DMG | | |
| RATE_INFO_FLAGS_EDMG | | |
| RATE_INFO_FLAGS_VHT_MCS | | |
| RATE_INFO_FLAGS_HE_MCS))) | |
| legacy_rate = status_rate->rate_idx.legacy; | |
| } else if (info->band < NUM_NL80211_BANDS && | |
| info->status.rates[0].idx >= 0 && | |
| !(info->status.rates[0].flags & (IEEE80211_TX_RC_MCS | | |
| IEEE80211_TX_RC_VHT_MCS))) { | |
| struct ieee80211_supported_band *sband; | |
| sband = local->hw.wiphy->bands[info->band]; | |
| legacy_rate = | |
| sband->bitrates[info->status.rates[0].idx].bitrate; | |
| } | |
| if (legacy_rate) { | |
| rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_RATE)); | |
| *pos = DIV_ROUND_UP(legacy_rate, 5); | |
| /* padding for tx flags */ | |
| pos += 2; | |
| } | |
| /* IEEE80211_RADIOTAP_TX_FLAGS */ | |
| txflags = 0; | |
| if (!(info->flags & IEEE80211_TX_STAT_ACK) && | |
| !is_multicast_ether_addr(hdr->addr1)) | |
| txflags |= IEEE80211_RADIOTAP_F_TX_FAIL; | |
| if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) | |
| txflags |= IEEE80211_RADIOTAP_F_TX_CTS; | |
| if (info->status.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) | |
| txflags |= IEEE80211_RADIOTAP_F_TX_RTS; | |
| put_unaligned_le16(txflags, pos); | |
| pos += 2; | |
| /* IEEE80211_RADIOTAP_DATA_RETRIES */ | |
| /* for now report the total retry_count */ | |
| *pos = retry_count; | |
| pos++; | |
| if (status_rate && (status_rate->rate_idx.flags & RATE_INFO_FLAGS_MCS)) | |
| { | |
| rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_MCS)); | |
| pos[0] = IEEE80211_RADIOTAP_MCS_HAVE_MCS | | |
| IEEE80211_RADIOTAP_MCS_HAVE_GI | | |
| IEEE80211_RADIOTAP_MCS_HAVE_BW; | |
| if (status_rate->rate_idx.flags & RATE_INFO_FLAGS_SHORT_GI) | |
| pos[1] |= IEEE80211_RADIOTAP_MCS_SGI; | |
| if (status_rate->rate_idx.bw == RATE_INFO_BW_40) | |
| pos[1] |= IEEE80211_RADIOTAP_MCS_BW_40; | |
| pos[2] = status_rate->rate_idx.mcs; | |
| pos += 3; | |
| } else if (status_rate && (status_rate->rate_idx.flags & | |
| RATE_INFO_FLAGS_VHT_MCS)) | |
| { | |
| u16 known = local->hw.radiotap_vht_details & | |
| (IEEE80211_RADIOTAP_VHT_KNOWN_GI | | |
| IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH); | |
| rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_VHT)); | |
| /* required alignment from rthdr */ | |
| pos = (u8 *)rthdr + ALIGN(pos - (u8 *)rthdr, 2); | |
| /* u16 known - IEEE80211_RADIOTAP_VHT_KNOWN_* */ | |
| put_unaligned_le16(known, pos); | |
| pos += 2; | |
| /* u8 flags - IEEE80211_RADIOTAP_VHT_FLAG_* */ | |
| if (status_rate->rate_idx.flags & RATE_INFO_FLAGS_SHORT_GI) | |
| *pos |= IEEE80211_RADIOTAP_VHT_FLAG_SGI; | |
| pos++; | |
| /* u8 bandwidth */ | |
| switch (status_rate->rate_idx.bw) { | |
| case RATE_INFO_BW_160: | |
| *pos = 11; | |
| break; | |
| case RATE_INFO_BW_80: | |
| *pos = 4; | |
| break; | |
| case RATE_INFO_BW_40: | |
| *pos = 1; | |
| break; | |
| default: | |
| *pos = 0; | |
| break; | |
| } | |
| pos++; | |
| /* u8 mcs_nss[4] */ | |
| *pos = (status_rate->rate_idx.mcs << 4) | | |
| status_rate->rate_idx.nss; | |
| pos += 4; | |
| /* u8 coding */ | |
| pos++; | |
| /* u8 group_id */ | |
| pos++; | |
| /* u16 partial_aid */ | |
| pos += 2; | |
| } else if (status_rate && (status_rate->rate_idx.flags & | |
| RATE_INFO_FLAGS_HE_MCS)) | |
| { | |
| struct ieee80211_radiotap_he *he; | |
| rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_HE)); | |
| /* required alignment from rthdr */ | |
| pos = (u8 *)rthdr + ALIGN(pos - (u8 *)rthdr, 2); | |
| he = (struct ieee80211_radiotap_he *)pos; | |
| he->data1 = cpu_to_le16(IEEE80211_RADIOTAP_HE_DATA1_FORMAT_SU | | |
| IEEE80211_RADIOTAP_HE_DATA1_DATA_MCS_KNOWN | | |
| IEEE80211_RADIOTAP_HE_DATA1_DATA_DCM_KNOWN | | |
| IEEE80211_RADIOTAP_HE_DATA1_BW_RU_ALLOC_KNOWN); | |
| he->data2 = cpu_to_le16(IEEE80211_RADIOTAP_HE_DATA2_GI_KNOWN); | |
| #define HE_PREP(f, val) le16_encode_bits(val, IEEE80211_RADIOTAP_HE_##f) | |
| he->data6 |= HE_PREP(DATA6_NSTS, status_rate->rate_idx.nss); | |
| #define CHECK_GI(s) \ | |
| BUILD_BUG_ON(IEEE80211_RADIOTAP_HE_DATA5_GI_##s != \ | |
| (int)NL80211_RATE_INFO_HE_GI_##s) | |
| CHECK_GI(0_8); | |
| CHECK_GI(1_6); | |
| CHECK_GI(3_2); | |
| he->data3 |= HE_PREP(DATA3_DATA_MCS, status_rate->rate_idx.mcs); | |
| he->data3 |= HE_PREP(DATA3_DATA_DCM, status_rate->rate_idx.he_dcm); | |
| he->data5 |= HE_PREP(DATA5_GI, status_rate->rate_idx.he_gi); | |
| switch (status_rate->rate_idx.bw) { | |
| case RATE_INFO_BW_20: | |
| he->data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC, | |
| IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_20MHZ); | |
| break; | |
| case RATE_INFO_BW_40: | |
| he->data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC, | |
| IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_40MHZ); | |
| break; | |
| case RATE_INFO_BW_80: | |
| he->data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC, | |
| IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_80MHZ); | |
| break; | |
| case RATE_INFO_BW_160: | |
| he->data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC, | |
| IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_160MHZ); | |
| break; | |
| case RATE_INFO_BW_HE_RU: | |
| #define CHECK_RU_ALLOC(s) \ | |
| BUILD_BUG_ON(IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_##s##T != \ | |
| NL80211_RATE_INFO_HE_RU_ALLOC_##s + 4) | |
| CHECK_RU_ALLOC(26); | |
| CHECK_RU_ALLOC(52); | |
| CHECK_RU_ALLOC(106); | |
| CHECK_RU_ALLOC(242); | |
| CHECK_RU_ALLOC(484); | |
| CHECK_RU_ALLOC(996); | |
| CHECK_RU_ALLOC(2x996); | |
| he->data5 |= HE_PREP(DATA5_DATA_BW_RU_ALLOC, | |
| status_rate->rate_idx.he_ru_alloc + 4); | |
| break; | |
| default: | |
| WARN_ONCE(1, "Invalid SU BW %d\n", status_rate->rate_idx.bw); | |
| } | |
| pos += sizeof(struct ieee80211_radiotap_he); | |
| } | |
| if (status_rate || info->status.rates[0].idx < 0) | |
| return; | |
| /* IEEE80211_RADIOTAP_MCS | |
| * IEEE80211_RADIOTAP_VHT */ | |
| if (info->status.rates[0].flags & IEEE80211_TX_RC_MCS) { | |
| rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_MCS)); | |
| pos[0] = IEEE80211_RADIOTAP_MCS_HAVE_MCS | | |
| IEEE80211_RADIOTAP_MCS_HAVE_GI | | |
| IEEE80211_RADIOTAP_MCS_HAVE_BW; | |
| if (info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI) | |
| pos[1] |= IEEE80211_RADIOTAP_MCS_SGI; | |
| if (info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) | |
| pos[1] |= IEEE80211_RADIOTAP_MCS_BW_40; | |
| if (info->status.rates[0].flags & IEEE80211_TX_RC_GREEN_FIELD) | |
| pos[1] |= IEEE80211_RADIOTAP_MCS_FMT_GF; | |
| pos[2] = info->status.rates[0].idx; | |
| pos += 3; | |
| } else if (info->status.rates[0].flags & IEEE80211_TX_RC_VHT_MCS) { | |
| u16 known = local->hw.radiotap_vht_details & | |
| (IEEE80211_RADIOTAP_VHT_KNOWN_GI | | |
| IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH); | |
| rthdr->it_present |= cpu_to_le32(BIT(IEEE80211_RADIOTAP_VHT)); | |
| /* required alignment from rthdr */ | |
| pos = (u8 *)rthdr + ALIGN(pos - (u8 *)rthdr, 2); | |
| /* u16 known - IEEE80211_RADIOTAP_VHT_KNOWN_* */ | |
| put_unaligned_le16(known, pos); | |
| pos += 2; | |
| /* u8 flags - IEEE80211_RADIOTAP_VHT_FLAG_* */ | |
| if (info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI) | |
| *pos |= IEEE80211_RADIOTAP_VHT_FLAG_SGI; | |
| pos++; | |
| /* u8 bandwidth */ | |
| if (info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) | |
| *pos = 1; | |
| else if (info->status.rates[0].flags & IEEE80211_TX_RC_80_MHZ_WIDTH) | |
| *pos = 4; | |
| else if (info->status.rates[0].flags & IEEE80211_TX_RC_160_MHZ_WIDTH) | |
| *pos = 11; | |
| else /* IEEE80211_TX_RC_{20_MHZ_WIDTH,FIXME:DUP_DATA} */ | |
| *pos = 0; | |
| pos++; | |
| /* u8 mcs_nss[4] */ | |
| *pos = (ieee80211_rate_get_vht_mcs(&info->status.rates[0]) << 4) | | |
| ieee80211_rate_get_vht_nss(&info->status.rates[0]); | |
| pos += 4; | |
| /* u8 coding */ | |
| pos++; | |
| /* u8 group_id */ | |
| pos++; | |
| /* u16 partial_aid */ | |
| pos += 2; | |
| } | |
| } | |
| /* | |
| * Handles the tx for TDLS teardown frames. | |
| * If the frame wasn't ACKed by the peer - it will be re-sent through the AP | |
| */ | |
| static void ieee80211_tdls_td_tx_handle(struct ieee80211_local *local, | |
| struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb, u32 flags) | |
| { | |
| struct sk_buff *teardown_skb; | |
| struct sk_buff *orig_teardown_skb; | |
| bool is_teardown = false; | |
| /* Get the teardown data we need and free the lock */ | |
| spin_lock(&sdata->u.mgd.teardown_lock); | |
| teardown_skb = sdata->u.mgd.teardown_skb; | |
| orig_teardown_skb = sdata->u.mgd.orig_teardown_skb; | |
| if ((skb == orig_teardown_skb) && teardown_skb) { | |
| sdata->u.mgd.teardown_skb = NULL; | |
| sdata->u.mgd.orig_teardown_skb = NULL; | |
| is_teardown = true; | |
| } | |
| spin_unlock(&sdata->u.mgd.teardown_lock); | |
| if (is_teardown) { | |
| /* This mechanism relies on being able to get ACKs */ | |
| WARN_ON(!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)); | |
| /* Check if peer has ACKed */ | |
| if (flags & IEEE80211_TX_STAT_ACK) { | |
| dev_kfree_skb_any(teardown_skb); | |
| } else { | |
| tdls_dbg(sdata, | |
| "TDLS Resending teardown through AP\n"); | |
| ieee80211_subif_start_xmit(teardown_skb, skb->dev); | |
| } | |
| } | |
| } | |
| static struct ieee80211_sub_if_data * | |
| ieee80211_sdata_from_skb(struct ieee80211_local *local, struct sk_buff *skb) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| struct ieee80211_hdr *hdr = (void *)skb->data; | |
| if (skb->dev) { | |
| list_for_each_entry_rcu(sdata, &local->interfaces, list) { | |
| if (!sdata->dev) | |
| continue; | |
| if (skb->dev == sdata->dev) | |
| return sdata; | |
| } | |
| return NULL; | |
| } | |
| list_for_each_entry_rcu(sdata, &local->interfaces, list) { | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_P2P_DEVICE: | |
| break; | |
| case NL80211_IFTYPE_NAN: | |
| if (sdata->u.nan.started) | |
| break; | |
| fallthrough; | |
| default: | |
| continue; | |
| } | |
| if (ether_addr_equal(sdata->vif.addr, hdr->addr2)) | |
| return sdata; | |
| } | |
| return NULL; | |
| } | |
| static void ieee80211_report_ack_skb(struct ieee80211_local *local, | |
| struct sk_buff *orig_skb, | |
| bool acked, bool dropped, | |
| ktime_t ack_hwtstamp) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(orig_skb); | |
| struct sk_buff *skb; | |
| unsigned long flags; | |
| spin_lock_irqsave(&local->ack_status_lock, flags); | |
| skb = idr_remove(&local->ack_status_frames, info->status_data); | |
| spin_unlock_irqrestore(&local->ack_status_lock, flags); | |
| if (!skb) | |
| return; | |
| if (info->flags & IEEE80211_TX_INTFL_NL80211_FRAME_TX) { | |
| u64 cookie = IEEE80211_SKB_CB(skb)->ack.cookie; | |
| struct ieee80211_sub_if_data *sdata; | |
| struct ieee80211_hdr *hdr = (void *)skb->data; | |
| bool is_valid_ack_signal = | |
| !!(info->status.flags & IEEE80211_TX_STATUS_ACK_SIGNAL_VALID); | |
| struct cfg80211_tx_status status = { | |
| .cookie = cookie, | |
| .buf = skb->data, | |
| .len = skb->len, | |
| .ack = acked, | |
| }; | |
| if (ieee80211_is_timing_measurement(orig_skb) || | |
| ieee80211_is_ftm(orig_skb)) { | |
| status.tx_tstamp = | |
| ktime_to_ns(skb_hwtstamps(orig_skb)->hwtstamp); | |
| status.ack_tstamp = ktime_to_ns(ack_hwtstamp); | |
| } | |
| rcu_read_lock(); | |
| sdata = ieee80211_sdata_from_skb(local, skb); | |
| if (sdata) { | |
| if (skb->protocol == sdata->control_port_protocol || | |
| skb->protocol == cpu_to_be16(ETH_P_PREAUTH)) | |
| cfg80211_control_port_tx_status(&sdata->wdev, | |
| cookie, | |
| skb->data, | |
| skb->len, | |
| acked, | |
| GFP_ATOMIC); | |
| else if (ieee80211_is_any_nullfunc(hdr->frame_control)) | |
| cfg80211_probe_status(sdata->dev, hdr->addr1, | |
| cookie, | |
| info->status.link_valid ? | |
| info->status.link_id : -1, | |
| acked, | |
| info->status.ack_signal, | |
| is_valid_ack_signal, | |
| GFP_ATOMIC); | |
| else if (ieee80211_is_mgmt(hdr->frame_control)) | |
| cfg80211_mgmt_tx_status_ext(&sdata->wdev, | |
| &status, | |
| GFP_ATOMIC); | |
| else | |
| pr_warn("Unknown status report in ack skb\n"); | |
| } | |
| rcu_read_unlock(); | |
| dev_kfree_skb_any(skb); | |
| } else if (dropped) { | |
| dev_kfree_skb_any(skb); | |
| } else { | |
| /* consumes skb */ | |
| skb_complete_wifi_ack(skb, acked); | |
| } | |
| } | |
| static void ieee80211_handle_smps_status(struct ieee80211_sub_if_data *sdata, | |
| bool acked, u16 status_data) | |
| { | |
| u16 sub_data = u16_get_bits(status_data, IEEE80211_STATUS_SUBDATA_MASK); | |
| enum ieee80211_smps_mode smps_mode = sub_data & 3; | |
| int link_id = (sub_data >> 2); | |
| struct ieee80211_link_data *link; | |
| if (!sdata || !ieee80211_sdata_running(sdata)) | |
| return; | |
| if (!acked) | |
| return; | |
| if (sdata->vif.type != NL80211_IFTYPE_STATION) | |
| return; | |
| if (WARN(link_id >= ARRAY_SIZE(sdata->link), | |
| "bad SMPS status link: %d\n", link_id)) | |
| return; | |
| link = rcu_dereference(sdata->link[link_id]); | |
| if (!link) | |
| return; | |
| /* | |
| * This update looks racy, but isn't, the only other place | |
| * updating this variable is in managed mode before assoc, | |
| * and we have to be associated to have a status from the | |
| * action frame TX, since we cannot send it while we're not | |
| * associated yet. | |
| */ | |
| link->smps_mode = smps_mode; | |
| wiphy_work_queue(sdata->local->hw.wiphy, &link->u.mgd.recalc_smps); | |
| } | |
| static void | |
| ieee80211_handle_teardown_ttlm_status(struct ieee80211_sub_if_data *sdata, | |
| bool acked) | |
| { | |
| if (!sdata || !ieee80211_sdata_running(sdata)) | |
| return; | |
| if (!acked) | |
| return; | |
| if (sdata->vif.type != NL80211_IFTYPE_STATION) | |
| return; | |
| wiphy_work_queue(sdata->local->hw.wiphy, | |
| &sdata->u.mgd.teardown_ttlm_work); | |
| } | |
| static void | |
| ieee80211_handle_uhr_omp_status(struct ieee80211_sub_if_data *sdata, bool acked) | |
| { | |
| if (!sdata || !ieee80211_sdata_running(sdata)) | |
| return; | |
| if (sdata->vif.type != NL80211_IFTYPE_STATION) | |
| return; | |
| sdata->u.mgd.uhr_omp.acked = acked; | |
| if (!acked) { | |
| wiphy_hrtimer_work_queue(sdata->local->hw.wiphy, | |
| &sdata->u.mgd.uhr_omp.status_work, 0); | |
| return; | |
| } | |
| wiphy_hrtimer_work_queue(sdata->local->hw.wiphy, | |
| &sdata->u.mgd.uhr_omp.status_work, | |
| us_to_ktime(sdata->u.mgd.uhr_omp.timeout_us)); | |
| } | |
| static void ieee80211_report_used_skb(struct ieee80211_local *local, | |
| struct sk_buff *skb, bool dropped, | |
| ktime_t ack_hwtstamp) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| u16 tx_time_est = ieee80211_info_get_tx_time_est(info); | |
| struct ieee80211_hdr *hdr = (void *)skb->data; | |
| bool acked = info->flags & IEEE80211_TX_STAT_ACK; | |
| if (dropped) | |
| acked = false; | |
| if (tx_time_est) { | |
| struct sta_info *sta; | |
| rcu_read_lock(); | |
| sta = sta_info_get_by_addrs(local, hdr->addr1, hdr->addr2); | |
| ieee80211_sta_update_pending_airtime(local, sta, | |
| skb_get_queue_mapping(skb), | |
| tx_time_est, | |
| true, info->tx_time_mc); | |
| rcu_read_unlock(); | |
| } | |
| if (info->flags & IEEE80211_TX_INTFL_MLME_CONN_TX) { | |
| struct ieee80211_sub_if_data *sdata; | |
| rcu_read_lock(); | |
| sdata = ieee80211_sdata_from_skb(local, skb); | |
| if (!sdata) { | |
| skb->dev = NULL; | |
| } else if (!dropped) { | |
| /* Check to see if packet is a TDLS teardown packet */ | |
| if (ieee80211_is_data(hdr->frame_control) && | |
| (ieee80211_get_tdls_action(skb) == | |
| WLAN_TDLS_TEARDOWN)) { | |
| ieee80211_tdls_td_tx_handle(local, sdata, skb, | |
| info->flags); | |
| } else if (ieee80211_s1g_is_twt_setup(skb)) { | |
| if (!acked) { | |
| struct sk_buff *qskb; | |
| qskb = skb_clone(skb, GFP_ATOMIC); | |
| if (qskb) { | |
| skb_queue_tail(&sdata->status_queue, | |
| qskb); | |
| wiphy_work_queue(local->hw.wiphy, | |
| &sdata->work); | |
| } | |
| } | |
| } else { | |
| ieee80211_mgd_conn_tx_status(sdata, | |
| hdr->frame_control, | |
| acked); | |
| } | |
| } | |
| rcu_read_unlock(); | |
| } else if (info->status_data_idr) { | |
| ieee80211_report_ack_skb(local, skb, acked, dropped, | |
| ack_hwtstamp); | |
| } else if (info->status_data) { | |
| struct ieee80211_sub_if_data *sdata; | |
| rcu_read_lock(); | |
| sdata = ieee80211_sdata_from_skb(local, skb); | |
| switch (u16_get_bits(info->status_data, | |
| IEEE80211_STATUS_TYPE_MASK)) { | |
| case IEEE80211_STATUS_TYPE_SMPS: | |
| ieee80211_handle_smps_status(sdata, acked, | |
| info->status_data); | |
| break; | |
| case IEEE80211_STATUS_TYPE_NEG_TTLM: | |
| ieee80211_handle_teardown_ttlm_status(sdata, acked); | |
| break; | |
| case IEEE80211_STATUS_TYPE_UHR_OMP: | |
| ieee80211_handle_uhr_omp_status(sdata, acked); | |
| break; | |
| } | |
| rcu_read_unlock(); | |
| } | |
| if (!dropped && skb->destructor) { | |
| skb->wifi_acked_valid = 1; | |
| skb->wifi_acked = acked; | |
| } | |
| ieee80211_led_tx(local); | |
| if (skb_has_frag_list(skb)) { | |
| kfree_skb_list(skb_shinfo(skb)->frag_list); | |
| skb_shinfo(skb)->frag_list = NULL; | |
| } | |
| } | |
| /* | |
| * Use a static threshold for now, best value to be determined | |
| * by testing ... | |
| * Should it depend on: | |
| * - on # of retransmissions | |
| * - current throughput (higher value for higher tpt)? | |
| */ | |
| #define STA_LOST_PKT_THRESHOLD 50 | |
| #define STA_LOST_PKT_TIME HZ /* 1 sec since last ACK */ | |
| #define STA_LOST_TDLS_PKT_TIME (10*HZ) /* 10secs since last ACK */ | |
| static void ieee80211_lost_packet(struct sta_info *sta, | |
| struct ieee80211_tx_info *info) | |
| { | |
| unsigned long pkt_time = STA_LOST_PKT_TIME; | |
| unsigned int pkt_thr = STA_LOST_PKT_THRESHOLD; | |
| /* If driver relies on its own algorithm for station kickout, skip | |
| * mac80211 packet loss mechanism. | |
| */ | |
| if (ieee80211_hw_check(&sta->local->hw, REPORTS_LOW_ACK)) | |
| return; | |
| /* This packet was aggregated but doesn't carry status info */ | |
| if ((info->flags & IEEE80211_TX_CTL_AMPDU) && | |
| !(info->flags & IEEE80211_TX_STAT_AMPDU)) | |
| return; | |
| sta->deflink.status_stats.lost_packets++; | |
| if (sta->sta.tdls) { | |
| pkt_time = STA_LOST_TDLS_PKT_TIME; | |
| pkt_thr = STA_LOST_PKT_THRESHOLD; | |
| } | |
| /* | |
| * If we're in TDLS mode, make sure that all STA_LOST_PKT_THRESHOLD | |
| * of the last packets were lost, and that no ACK was received in the | |
| * last STA_LOST_TDLS_PKT_TIME ms, before triggering the CQM packet-loss | |
| * mechanism. | |
| * For non-TDLS, use STA_LOST_PKT_THRESHOLD and STA_LOST_PKT_TIME | |
| */ | |
| if (sta->deflink.status_stats.lost_packets < pkt_thr || | |
| !time_after(jiffies, sta->deflink.status_stats.last_pkt_time + pkt_time)) | |
| return; | |
| cfg80211_cqm_pktloss_notify(sta->sdata->dev, sta->sta.addr, | |
| sta->deflink.status_stats.lost_packets, | |
| GFP_ATOMIC); | |
| sta->deflink.status_stats.lost_packets = 0; | |
| } | |
| static int ieee80211_tx_get_rates(struct ieee80211_hw *hw, | |
| struct ieee80211_tx_info *info, | |
| int *retry_count) | |
| { | |
| int count = -1; | |
| int i; | |
| for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { | |
| if ((info->flags & IEEE80211_TX_CTL_AMPDU) && | |
| !(info->flags & IEEE80211_TX_STAT_AMPDU)) { | |
| /* just the first aggr frame carry status info */ | |
| info->status.rates[i].idx = -1; | |
| info->status.rates[i].count = 0; | |
| break; | |
| } else if (info->status.rates[i].idx < 0) { | |
| break; | |
| } else if (i >= hw->max_report_rates) { | |
| /* the HW cannot have attempted that rate */ | |
| info->status.rates[i].idx = -1; | |
| info->status.rates[i].count = 0; | |
| break; | |
| } | |
| count += info->status.rates[i].count; | |
| } | |
| if (count < 0) | |
| count = 0; | |
| *retry_count = count; | |
| return i - 1; | |
| } | |
| void ieee80211_tx_monitor(struct ieee80211_local *local, struct sk_buff *skb, | |
| int retry_count, struct ieee80211_tx_status *status) | |
| { | |
| struct sk_buff *skb2; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_sub_if_data *sdata; | |
| struct net_device *prev_dev = NULL; | |
| int rtap_len; | |
| /* send frame to monitor interfaces now */ | |
| rtap_len = ieee80211_tx_radiotap_len(info, status); | |
| if (WARN_ON_ONCE(skb_headroom(skb) < rtap_len)) { | |
| pr_err("ieee80211_tx_status: headroom too small\n"); | |
| dev_kfree_skb(skb); | |
| return; | |
| } | |
| ieee80211_add_tx_radiotap_header(local, skb, retry_count, | |
| rtap_len, status); | |
| /* XXX: is this sufficient for BPF? */ | |
| skb_reset_mac_header(skb); | |
| skb->ip_summed = CHECKSUM_UNNECESSARY; | |
| skb->pkt_type = PACKET_OTHERHOST; | |
| skb->protocol = htons(ETH_P_802_2); | |
| memset(skb->cb, 0, sizeof(skb->cb)); | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(sdata, &local->interfaces, list) { | |
| if (sdata->vif.type == NL80211_IFTYPE_MONITOR) { | |
| if (!ieee80211_sdata_running(sdata)) | |
| continue; | |
| if (sdata->u.mntr.flags & MONITOR_FLAG_SKIP_TX) | |
| continue; | |
| if (prev_dev) { | |
| skb2 = skb_clone(skb, GFP_ATOMIC); | |
| if (skb2) { | |
| skb2->dev = prev_dev; | |
| netif_rx(skb2); | |
| } | |
| } | |
| prev_dev = sdata->dev; | |
| } | |
| } | |
| if (prev_dev) { | |
| skb->dev = prev_dev; | |
| netif_rx(skb); | |
| skb = NULL; | |
| } | |
| rcu_read_unlock(); | |
| dev_kfree_skb(skb); | |
| } | |
| static void __ieee80211_tx_status(struct ieee80211_hw *hw, | |
| struct ieee80211_tx_status *status, | |
| int rates_idx, int retry_count) | |
| { | |
| struct sk_buff *skb = status->skb; | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| struct ieee80211_tx_info *info = status->info; | |
| struct sta_info *sta; | |
| __le16 fc; | |
| bool acked; | |
| bool noack_success; | |
| struct ieee80211_bar *bar; | |
| int tid = IEEE80211_NUM_TIDS; | |
| fc = hdr->frame_control; | |
| if (status->sta) { | |
| sta = container_of(status->sta, struct sta_info, sta); | |
| if (info->flags & IEEE80211_TX_STATUS_EOSP) | |
| clear_sta_flag(sta, WLAN_STA_SP); | |
| acked = !!(info->flags & IEEE80211_TX_STAT_ACK); | |
| noack_success = !!(info->flags & | |
| IEEE80211_TX_STAT_NOACK_TRANSMITTED); | |
| /* mesh Peer Service Period support */ | |
| if (ieee80211_vif_is_mesh(&sta->sdata->vif) && | |
| ieee80211_is_data_qos(fc)) | |
| ieee80211_mpsp_trigger_process( | |
| ieee80211_get_qos_ctl(hdr), sta, true, acked); | |
| if (ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL) && | |
| (ieee80211_is_data(hdr->frame_control)) && | |
| (rates_idx != -1)) | |
| sta->deflink.tx_stats.last_rate = | |
| info->status.rates[rates_idx]; | |
| if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) && | |
| (ieee80211_is_data_qos(fc))) { | |
| u16 ssn; | |
| u8 *qc; | |
| qc = ieee80211_get_qos_ctl(hdr); | |
| tid = qc[0] & 0xf; | |
| ssn = ((le16_to_cpu(hdr->seq_ctrl) + 0x10) | |
| & IEEE80211_SCTL_SEQ); | |
| ieee80211_send_bar(&sta->sdata->vif, hdr->addr1, | |
| tid, ssn); | |
| } else if (ieee80211_is_data_qos(fc)) { | |
| u8 *qc = ieee80211_get_qos_ctl(hdr); | |
| tid = qc[0] & 0xf; | |
| } | |
| if (!acked && ieee80211_is_back_req(fc)) { | |
| u16 control; | |
| /* | |
| * BAR failed, store the last SSN and retry sending | |
| * the BAR when the next unicast transmission on the | |
| * same TID succeeds. | |
| */ | |
| bar = (struct ieee80211_bar *) skb->data; | |
| control = le16_to_cpu(bar->control); | |
| if (!(control & IEEE80211_BAR_CTRL_MULTI_TID)) { | |
| u16 ssn = le16_to_cpu(bar->start_seq_num); | |
| tid = (control & | |
| IEEE80211_BAR_CTRL_TID_INFO_MASK) >> | |
| IEEE80211_BAR_CTRL_TID_INFO_SHIFT; | |
| ieee80211_set_bar_pending(sta, tid, ssn); | |
| } | |
| } | |
| if (info->flags & IEEE80211_TX_STAT_TX_FILTERED) { | |
| ieee80211_handle_filtered_frame(local, sta, skb); | |
| return; | |
| } else if (ieee80211_is_data_present(fc)) { | |
| if (!acked && !noack_success) | |
| sta->deflink.status_stats.msdu_failed[tid]++; | |
| sta->deflink.status_stats.msdu_retries[tid] += | |
| retry_count; | |
| } | |
| if (!(info->flags & IEEE80211_TX_CTL_INJECTED) && acked) | |
| ieee80211_frame_acked(sta, skb); | |
| } | |
| /* SNMP counters | |
| * Fragments are passed to low-level drivers as separate skbs, so these | |
| * are actually fragments, not frames. Update frame counters only for | |
| * the first fragment of the frame. */ | |
| if ((info->flags & IEEE80211_TX_STAT_ACK) || | |
| (info->flags & IEEE80211_TX_STAT_NOACK_TRANSMITTED)) { | |
| if (ieee80211_is_first_frag(hdr->seq_ctrl)) { | |
| I802_DEBUG_INC(local->dot11TransmittedFrameCount); | |
| if (is_multicast_ether_addr(ieee80211_get_DA(hdr))) | |
| I802_DEBUG_INC(local->dot11MulticastTransmittedFrameCount); | |
| if (retry_count > 0) | |
| I802_DEBUG_INC(local->dot11RetryCount); | |
| if (retry_count > 1) | |
| I802_DEBUG_INC(local->dot11MultipleRetryCount); | |
| } | |
| /* This counter shall be incremented for an acknowledged MPDU | |
| * with an individual address in the address 1 field or an MPDU | |
| * with a multicast address in the address 1 field of type Data | |
| * or Management. */ | |
| if (!is_multicast_ether_addr(hdr->addr1) || | |
| ieee80211_is_data(fc) || | |
| ieee80211_is_mgmt(fc)) | |
| I802_DEBUG_INC(local->dot11TransmittedFragmentCount); | |
| } else { | |
| if (ieee80211_is_first_frag(hdr->seq_ctrl)) | |
| I802_DEBUG_INC(local->dot11FailedCount); | |
| } | |
| if (ieee80211_is_any_nullfunc(fc) && | |
| ieee80211_has_pm(fc) && | |
| ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) && | |
| !(info->flags & IEEE80211_TX_CTL_INJECTED) && | |
| local->ps_sdata && !(local->scanning)) { | |
| if (info->flags & IEEE80211_TX_STAT_ACK) | |
| local->ps_sdata->u.mgd.flags |= | |
| IEEE80211_STA_NULLFUNC_ACKED; | |
| mod_timer(&local->dynamic_ps_timer, | |
| jiffies + msecs_to_jiffies(10)); | |
| } | |
| ieee80211_report_used_skb(local, skb, false, status->ack_hwtstamp); | |
| /* | |
| * This is a bit racy but we can avoid a lot of work | |
| * with this test... | |
| */ | |
| if (local->tx_mntrs) | |
| ieee80211_tx_monitor(local, skb, retry_count, status); | |
| else if (status->free_list) | |
| list_add_tail(&skb->list, status->free_list); | |
| else | |
| dev_kfree_skb(skb); | |
| } | |
| void ieee80211_tx_status_skb(struct ieee80211_hw *hw, struct sk_buff *skb) | |
| { | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| struct ieee80211_tx_status status = { | |
| .skb = skb, | |
| .info = IEEE80211_SKB_CB(skb), | |
| }; | |
| struct sta_info *sta; | |
| rcu_read_lock(); | |
| sta = sta_info_get_by_addrs(local, hdr->addr1, hdr->addr2); | |
| if (sta) | |
| status.sta = &sta->sta; | |
| ieee80211_tx_status_ext(hw, &status); | |
| rcu_read_unlock(); | |
| } | |
| EXPORT_SYMBOL(ieee80211_tx_status_skb); | |
| /* | |
| * Check whether the HT/VHT rate information in a TX status entry is | |
| * valid for its encoding. This is not specific to any rate control | |
| * algorithm; all status consumers rely on the values being sane. | |
| */ | |
| static bool ieee80211_tx_status_rate_info_valid(const struct rate_info *rate) | |
| { | |
| if (rate->flags & RATE_INFO_FLAGS_MCS) | |
| return rate->mcs < 32; | |
| if (rate->flags & RATE_INFO_FLAGS_VHT_MCS) | |
| return rate->nss >= 1 && rate->nss <= 8 && rate->mcs <= 11; | |
| return true; | |
| } | |
| static bool | |
| ieee80211_tx_status_tx_rate_valid(const struct ieee80211_tx_rate *rate) | |
| { | |
| if (rate->flags & IEEE80211_TX_RC_MCS) | |
| return rate->idx < 32; | |
| if (rate->flags & IEEE80211_TX_RC_VHT_MCS) | |
| return ieee80211_rate_get_vht_mcs(rate) <= 11; | |
| return true; | |
| } | |
| /* | |
| * Drop TX status rate entries that don't describe a valid rate. The | |
| * status information is used by rate control and by other mac80211 | |
| * code, and a malformed entry must not be able to corrupt state beyond | |
| * the driver that reported it. | |
| */ | |
| static void | |
| ieee80211_tx_status_drop_invalid_rates(struct ieee80211_tx_status *status) | |
| { | |
| int i; | |
| for (i = 0; i < status->n_rates; i++) { | |
| struct ieee80211_rate_status *rs = &status->rates[i]; | |
| if (ieee80211_tx_status_rate_info_valid(&rs->rate_idx)) | |
| continue; | |
| rs->try_count = 0; | |
| memset(&rs->rate_idx, 0, sizeof(rs->rate_idx)); | |
| } | |
| if (!status->info) | |
| return; | |
| for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { | |
| struct ieee80211_tx_rate *rate; | |
| rate = &status->info->status.rates[i]; | |
| if (rate->idx < 0) | |
| break; | |
| if (ieee80211_tx_status_tx_rate_valid(rate)) | |
| continue; | |
| rate->idx = -1; | |
| rate->count = 0; | |
| } | |
| } | |
| void ieee80211_tx_status_ext(struct ieee80211_hw *hw, | |
| struct ieee80211_tx_status *status) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| struct ieee80211_tx_info *info = status->info; | |
| struct ieee80211_sta *pubsta = status->sta; | |
| struct sk_buff *skb = status->skb; | |
| struct sta_info *sta = NULL; | |
| int rates_idx, retry_count; | |
| bool acked, noack_success, ack_signal_valid; | |
| u16 tx_time_est; | |
| ieee80211_tx_status_drop_invalid_rates(status); | |
| if (pubsta) { | |
| sta = container_of(pubsta, struct sta_info, sta); | |
| if (status->n_rates) | |
| sta->deflink.tx_stats.last_rate_info = | |
| status->rates[status->n_rates - 1].rate_idx; | |
| } | |
| if (skb && (tx_time_est = | |
| ieee80211_info_get_tx_time_est(IEEE80211_SKB_CB(skb))) > 0) { | |
| /* Do this here to avoid the expensive lookup of the sta | |
| * in ieee80211_report_used_skb(). | |
| */ | |
| bool mcast = IEEE80211_SKB_CB(skb)->tx_time_mc; | |
| ieee80211_sta_update_pending_airtime(local, sta, | |
| skb_get_queue_mapping(skb), | |
| tx_time_est, | |
| true, mcast); | |
| ieee80211_info_set_tx_time_est(IEEE80211_SKB_CB(skb), 0); | |
| } | |
| if (!status->info) | |
| goto free; | |
| rates_idx = ieee80211_tx_get_rates(hw, info, &retry_count); | |
| acked = !!(info->flags & IEEE80211_TX_STAT_ACK); | |
| noack_success = !!(info->flags & IEEE80211_TX_STAT_NOACK_TRANSMITTED); | |
| ack_signal_valid = | |
| !!(info->status.flags & IEEE80211_TX_STATUS_ACK_SIGNAL_VALID); | |
| if (pubsta) { | |
| struct ieee80211_sub_if_data *sdata = sta->sdata; | |
| if (!acked && !noack_success) | |
| sta->deflink.status_stats.retry_failed++; | |
| sta->deflink.status_stats.retry_count += retry_count; | |
| if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) { | |
| if (sdata->vif.type == NL80211_IFTYPE_STATION && | |
| skb && !(info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP)) | |
| ieee80211_sta_tx_notify(sdata, (void *) skb->data, | |
| acked, info->status.tx_time); | |
| if (acked) { | |
| sta->deflink.status_stats.last_ack = jiffies; | |
| if (sta->deflink.status_stats.lost_packets) | |
| sta->deflink.status_stats.lost_packets = 0; | |
| /* Track when last packet was ACKed */ | |
| sta->deflink.status_stats.last_pkt_time = jiffies; | |
| /* Reset connection monitor */ | |
| if (sdata->vif.type == NL80211_IFTYPE_STATION && | |
| unlikely(sdata->u.mgd.probe_send_count > 0)) | |
| sdata->u.mgd.probe_send_count = 0; | |
| if (ack_signal_valid) { | |
| sta->deflink.status_stats.last_ack_signal = | |
| (s8)info->status.ack_signal; | |
| sta->deflink.status_stats.ack_signal_filled = true; | |
| ewma_avg_signal_add(&sta->deflink.status_stats.avg_ack_signal, | |
| -info->status.ack_signal); | |
| } | |
| } else if (test_sta_flag(sta, WLAN_STA_PS_STA)) { | |
| /* | |
| * The STA is in power save mode, so assume | |
| * that this TX packet failed because of that. | |
| */ | |
| if (skb) | |
| ieee80211_handle_filtered_frame(local, sta, skb); | |
| return; | |
| } else if (noack_success) { | |
| /* nothing to do here, do not account as lost */ | |
| } else { | |
| ieee80211_lost_packet(sta, info); | |
| } | |
| } | |
| rate_control_tx_status(local, status); | |
| if (ieee80211_vif_is_mesh(&sta->sdata->vif)) | |
| ieee80211s_update_metric(local, sta, status); | |
| } | |
| if (skb && !(info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP)) | |
| return __ieee80211_tx_status(hw, status, rates_idx, | |
| retry_count); | |
| if (acked || noack_success) { | |
| I802_DEBUG_INC(local->dot11TransmittedFrameCount); | |
| if (!pubsta) | |
| I802_DEBUG_INC(local->dot11MulticastTransmittedFrameCount); | |
| if (retry_count > 0) | |
| I802_DEBUG_INC(local->dot11RetryCount); | |
| if (retry_count > 1) | |
| I802_DEBUG_INC(local->dot11MultipleRetryCount); | |
| } else { | |
| I802_DEBUG_INC(local->dot11FailedCount); | |
| } | |
| free: | |
| if (!skb) | |
| return; | |
| ieee80211_report_used_skb(local, skb, false, status->ack_hwtstamp); | |
| if (status->free_list) | |
| list_add_tail(&skb->list, status->free_list); | |
| else | |
| dev_kfree_skb(skb); | |
| } | |
| EXPORT_SYMBOL(ieee80211_tx_status_ext); | |
| void ieee80211_tx_rate_update(struct ieee80211_hw *hw, | |
| struct ieee80211_sta *pubsta, | |
| struct ieee80211_tx_info *info) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | |
| struct ieee80211_tx_status status = { | |
| .info = info, | |
| .sta = pubsta, | |
| }; | |
| ieee80211_tx_status_drop_invalid_rates(&status); | |
| rate_control_tx_status(local, &status); | |
| if (ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL)) | |
| sta->deflink.tx_stats.last_rate = info->status.rates[0]; | |
| } | |
| EXPORT_SYMBOL(ieee80211_tx_rate_update); | |
| void ieee80211_report_low_ack(struct ieee80211_sta *pubsta, u32 num_packets) | |
| { | |
| struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | |
| cfg80211_cqm_pktloss_notify(sta->sdata->dev, sta->sta.addr, | |
| num_packets, GFP_ATOMIC); | |
| } | |
| EXPORT_SYMBOL(ieee80211_report_low_ack); | |
| void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| ktime_t kt = ktime_set(0, 0); | |
| ieee80211_report_used_skb(local, skb, true, kt); | |
| dev_kfree_skb_any(skb); | |
| } | |
| EXPORT_SYMBOL(ieee80211_free_txskb); | |
| void ieee80211_purge_tx_queue(struct ieee80211_hw *hw, | |
| struct sk_buff_head *skbs) | |
| { | |
| struct sk_buff *skb; | |
| while ((skb = __skb_dequeue(skbs))) | |
| ieee80211_free_txskb(hw, skb); | |
| } | |
| EXPORT_SYMBOL(ieee80211_purge_tx_queue); |