| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * DSA topology and switch handling | |
| * | |
| * Copyright (c) 2008-2009 Marvell Semiconductor | |
| * Copyright (c) 2013 Florian Fainelli <florian@openwrt.org> | |
| * Copyright (c) 2016 Andrew Lunn <andrew@lunn.ch> | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/err.h> | |
| #include <linux/if_hsr.h> | |
| #include <linux/list.h> | |
| #include <linux/module.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/slab.h> | |
| #include <linux/rtnetlink.h> | |
| #include <linux/of.h> | |
| #include <linux/of_net.h> | |
| #include <net/dsa_stubs.h> | |
| #include <net/netdev_lock.h> | |
| #include <net/sch_generic.h> | |
| #include "conduit.h" | |
| #include "devlink.h" | |
| #include "dsa.h" | |
| #include "netlink.h" | |
| #include "port.h" | |
| #include "switch.h" | |
| #include "tag.h" | |
| #include "user.h" | |
| #define DSA_MAX_NUM_OFFLOADING_BRIDGES BITS_PER_LONG | |
| static DEFINE_MUTEX(dsa2_mutex); | |
| LIST_HEAD(dsa_tree_list); | |
| static struct workqueue_struct *dsa_owq; | |
| /* Track the bridges with forwarding offload enabled */ | |
| static unsigned long dsa_fwd_offloading_bridges; | |
| bool dsa_schedule_work(struct work_struct *work) | |
| { | |
| return queue_work(dsa_owq, work); | |
| } | |
| void dsa_flush_workqueue(void) | |
| { | |
| flush_workqueue(dsa_owq); | |
| } | |
| EXPORT_SYMBOL_GPL(dsa_flush_workqueue); | |
| /** | |
| * dsa_lag_map() - Map LAG structure to a linear LAG array | |
| * @dst: Tree in which to record the mapping. | |
| * @lag: LAG structure that is to be mapped to the tree's array. | |
| * | |
| * dsa_lag_id/dsa_lag_by_id can then be used to translate between the | |
| * two spaces. The size of the mapping space is determined by the | |
| * driver by setting ds->num_lag_ids. It is perfectly legal to leave | |
| * it unset if it is not needed, in which case these functions become | |
| * no-ops. | |
| */ | |
| void dsa_lag_map(struct dsa_switch_tree *dst, struct dsa_lag *lag) | |
| { | |
| unsigned int id; | |
| for (id = 1; id <= dst->lags_len; id++) { | |
| if (!dsa_lag_by_id(dst, id)) { | |
| dst->lags[id - 1] = lag; | |
| lag->id = id; | |
| return; | |
| } | |
| } | |
| /* No IDs left, which is OK. Some drivers do not need it. The | |
| * ones that do, e.g. mv88e6xxx, will discover that dsa_lag_id | |
| * returns an error for this device when joining the LAG. The | |
| * driver can then return -EOPNOTSUPP back to DSA, which will | |
| * fall back to a software LAG. | |
| */ | |
| } | |
| /** | |
| * dsa_lag_unmap() - Remove a LAG ID mapping | |
| * @dst: Tree in which the mapping is recorded. | |
| * @lag: LAG structure that was mapped. | |
| * | |
| * As there may be multiple users of the mapping, it is only removed | |
| * if there are no other references to it. | |
| */ | |
| void dsa_lag_unmap(struct dsa_switch_tree *dst, struct dsa_lag *lag) | |
| { | |
| unsigned int id; | |
| dsa_lags_foreach_id(id, dst) { | |
| if (dsa_lag_by_id(dst, id) == lag) { | |
| dst->lags[id - 1] = NULL; | |
| lag->id = 0; | |
| break; | |
| } | |
| } | |
| } | |
| struct dsa_lag *dsa_tree_lag_find(struct dsa_switch_tree *dst, | |
| const struct net_device *lag_dev) | |
| { | |
| struct dsa_port *dp; | |
| list_for_each_entry(dp, &dst->ports, list) | |
| if (dsa_port_lag_dev_get(dp) == lag_dev) | |
| return dp->lag; | |
| return NULL; | |
| } | |
| struct dsa_bridge *dsa_tree_bridge_find(struct dsa_switch_tree *dst, | |
| const struct net_device *br) | |
| { | |
| struct dsa_port *dp; | |
| list_for_each_entry(dp, &dst->ports, list) | |
| if (dsa_port_bridge_dev_get(dp) == br) | |
| return dp->bridge; | |
| return NULL; | |
| } | |
| static int dsa_bridge_num_find(const struct net_device *bridge_dev) | |
| { | |
| struct dsa_switch_tree *dst; | |
| list_for_each_entry(dst, &dsa_tree_list, list) { | |
| struct dsa_bridge *bridge; | |
| bridge = dsa_tree_bridge_find(dst, bridge_dev); | |
| if (bridge) | |
| return bridge->num; | |
| } | |
| return 0; | |
| } | |
| unsigned int dsa_bridge_num_get(const struct net_device *bridge_dev, int max) | |
| { | |
| unsigned int bridge_num = dsa_bridge_num_find(bridge_dev); | |
| /* Switches without FDB isolation support don't get unique | |
| * bridge numbering | |
| */ | |
| if (!max) | |
| return 0; | |
| if (!bridge_num) { | |
| /* First port that requests FDB isolation or TX forwarding | |
| * offload for this bridge | |
| */ | |
| bridge_num = find_next_zero_bit(&dsa_fwd_offloading_bridges, | |
| DSA_MAX_NUM_OFFLOADING_BRIDGES, | |
| 1); | |
| if (bridge_num > max) | |
| return 0; | |
| set_bit(bridge_num, &dsa_fwd_offloading_bridges); | |
| } | |
| return bridge_num; | |
| } | |
| void dsa_bridge_num_put(const struct net_device *bridge_dev, | |
| unsigned int bridge_num) | |
| { | |
| /* Since we refcount bridges, we know that when we call this function | |
| * it is no longer in use, so we can just go ahead and remove it from | |
| * the bit mask. | |
| */ | |
| clear_bit(bridge_num, &dsa_fwd_offloading_bridges); | |
| } | |
| struct dsa_switch *dsa_switch_find(int tree_index, int sw_index) | |
| { | |
| struct dsa_switch_tree *dst; | |
| struct dsa_port *dp; | |
| list_for_each_entry(dst, &dsa_tree_list, list) { | |
| if (dst->index != tree_index) | |
| continue; | |
| list_for_each_entry(dp, &dst->ports, list) { | |
| if (dp->ds->index != sw_index) | |
| continue; | |
| return dp->ds; | |
| } | |
| } | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(dsa_switch_find); | |
| static struct dsa_switch_tree *dsa_tree_find(int index) | |
| { | |
| struct dsa_switch_tree *dst; | |
| list_for_each_entry(dst, &dsa_tree_list, list) | |
| if (dst->index == index) | |
| return dst; | |
| return NULL; | |
| } | |
| static struct dsa_switch_tree *dsa_tree_alloc(int index) | |
| { | |
| struct dsa_switch_tree *dst; | |
| dst = kzalloc_obj(*dst); | |
| if (!dst) | |
| return NULL; | |
| dst->index = index; | |
| INIT_LIST_HEAD(&dst->rtable); | |
| INIT_LIST_HEAD(&dst->ports); | |
| INIT_LIST_HEAD(&dst->list); | |
| list_add_tail(&dst->list, &dsa_tree_list); | |
| kref_init(&dst->refcount); | |
| return dst; | |
| } | |
| static void dsa_tree_free(struct dsa_switch_tree *dst) | |
| { | |
| if (dst->tag_ops) | |
| dsa_tag_driver_put(dst->tag_ops); | |
| list_del(&dst->list); | |
| kfree(dst); | |
| } | |
| static struct dsa_switch_tree *dsa_tree_get(struct dsa_switch_tree *dst) | |
| { | |
| if (dst) | |
| kref_get(&dst->refcount); | |
| return dst; | |
| } | |
| static struct dsa_switch_tree *dsa_tree_touch(int index) | |
| { | |
| struct dsa_switch_tree *dst; | |
| dst = dsa_tree_find(index); | |
| if (dst) | |
| return dsa_tree_get(dst); | |
| else | |
| return dsa_tree_alloc(index); | |
| } | |
| static void dsa_tree_release(struct kref *ref) | |
| { | |
| struct dsa_switch_tree *dst; | |
| dst = container_of(ref, struct dsa_switch_tree, refcount); | |
| dsa_tree_free(dst); | |
| } | |
| static void dsa_tree_put(struct dsa_switch_tree *dst) | |
| { | |
| if (dst) | |
| kref_put(&dst->refcount, dsa_tree_release); | |
| } | |
| static struct dsa_port *dsa_tree_find_port_by_node(struct dsa_switch_tree *dst, | |
| struct device_node *dn) | |
| { | |
| struct dsa_port *dp; | |
| list_for_each_entry(dp, &dst->ports, list) | |
| if (dp->dn == dn) | |
| return dp; | |
| return NULL; | |
| } | |
| static struct dsa_link *dsa_link_touch(struct dsa_port *dp, | |
| struct dsa_port *link_dp) | |
| { | |
| struct dsa_switch *ds = dp->ds; | |
| struct dsa_switch_tree *dst; | |
| struct dsa_link *dl; | |
| dst = ds->dst; | |
| list_for_each_entry(dl, &dst->rtable, list) | |
| if (dl->dp == dp && dl->link_dp == link_dp) | |
| return dl; | |
| dl = kzalloc_obj(*dl); | |
| if (!dl) | |
| return NULL; | |
| dl->dp = dp; | |
| dl->link_dp = link_dp; | |
| INIT_LIST_HEAD(&dl->list); | |
| list_add_tail(&dl->list, &dst->rtable); | |
| return dl; | |
| } | |
| static bool dsa_port_setup_routing_table(struct dsa_port *dp) | |
| { | |
| struct dsa_switch *ds = dp->ds; | |
| struct dsa_switch_tree *dst = ds->dst; | |
| struct device_node *dn = dp->dn; | |
| struct of_phandle_iterator it; | |
| struct dsa_port *link_dp; | |
| struct dsa_link *dl; | |
| int err; | |
| of_for_each_phandle(&it, err, dn, "link", NULL, 0) { | |
| link_dp = dsa_tree_find_port_by_node(dst, it.node); | |
| if (!link_dp) { | |
| of_node_put(it.node); | |
| return false; | |
| } | |
| dl = dsa_link_touch(dp, link_dp); | |
| if (!dl) { | |
| of_node_put(it.node); | |
| return false; | |
| } | |
| } | |
| return true; | |
| } | |
| static bool dsa_tree_setup_routing_table(struct dsa_switch_tree *dst) | |
| { | |
| bool complete = true; | |
| struct dsa_port *dp; | |
| list_for_each_entry(dp, &dst->ports, list) { | |
| if (dsa_port_is_dsa(dp)) { | |
| complete = dsa_port_setup_routing_table(dp); | |
| if (!complete) | |
| break; | |
| } | |
| } | |
| return complete; | |
| } | |
| static struct dsa_port *dsa_tree_find_first_cpu(struct dsa_switch_tree *dst) | |
| { | |
| struct dsa_port *dp; | |
| list_for_each_entry(dp, &dst->ports, list) | |
| if (dsa_port_is_cpu(dp)) | |
| return dp; | |
| return NULL; | |
| } | |
| struct net_device *dsa_tree_find_first_conduit(struct dsa_switch_tree *dst) | |
| { | |
| struct dsa_port *cpu_dp; | |
| cpu_dp = dsa_tree_find_first_cpu(dst); | |
| return cpu_dp->conduit; | |
| } | |
| /* Assign the default CPU port (the first one in the tree) to all ports of the | |
| * fabric which don't already have one as part of their own switch. | |
| */ | |
| static int dsa_tree_setup_default_cpu(struct dsa_switch_tree *dst) | |
| { | |
| struct dsa_port *cpu_dp, *dp; | |
| cpu_dp = dsa_tree_find_first_cpu(dst); | |
| if (!cpu_dp) { | |
| pr_err("DSA: tree %d has no CPU port\n", dst->index); | |
| return -EINVAL; | |
| } | |
| list_for_each_entry(dp, &dst->ports, list) { | |
| if (dp->cpu_dp) | |
| continue; | |
| if (dsa_port_is_user(dp) || dsa_port_is_dsa(dp)) | |
| dp->cpu_dp = cpu_dp; | |
| } | |
| return 0; | |
| } | |
| static struct dsa_port * | |
| dsa_switch_preferred_default_local_cpu_port(struct dsa_switch *ds) | |
| { | |
| struct dsa_port *cpu_dp; | |
| if (!ds->ops->preferred_default_local_cpu_port) | |
| return NULL; | |
| cpu_dp = ds->ops->preferred_default_local_cpu_port(ds); | |
| if (!cpu_dp) | |
| return NULL; | |
| if (WARN_ON(!dsa_port_is_cpu(cpu_dp) || cpu_dp->ds != ds)) | |
| return NULL; | |
| return cpu_dp; | |
| } | |
| /* Perform initial assignment of CPU ports to user ports and DSA links in the | |
| * fabric, giving preference to CPU ports local to each switch. Default to | |
| * using the first CPU port in the switch tree if the port does not have a CPU | |
| * port local to this switch. | |
| */ | |
| static int dsa_tree_setup_cpu_ports(struct dsa_switch_tree *dst) | |
| { | |
| struct dsa_port *preferred_cpu_dp, *cpu_dp, *dp; | |
| list_for_each_entry(cpu_dp, &dst->ports, list) { | |
| if (!dsa_port_is_cpu(cpu_dp)) | |
| continue; | |
| preferred_cpu_dp = dsa_switch_preferred_default_local_cpu_port(cpu_dp->ds); | |
| if (preferred_cpu_dp && preferred_cpu_dp != cpu_dp) | |
| continue; | |
| /* Prefer a local CPU port */ | |
| dsa_switch_for_each_port(dp, cpu_dp->ds) { | |
| /* Prefer the first local CPU port found */ | |
| if (dp->cpu_dp) | |
| continue; | |
| if (dsa_port_is_user(dp) || dsa_port_is_dsa(dp)) | |
| dp->cpu_dp = cpu_dp; | |
| } | |
| } | |
| return dsa_tree_setup_default_cpu(dst); | |
| } | |
| static void dsa_tree_teardown_cpu_ports(struct dsa_switch_tree *dst) | |
| { | |
| struct dsa_port *dp; | |
| list_for_each_entry(dp, &dst->ports, list) | |
| if (dsa_port_is_user(dp) || dsa_port_is_dsa(dp)) | |
| dp->cpu_dp = NULL; | |
| } | |
| static int dsa_port_setup(struct dsa_port *dp) | |
| { | |
| bool dsa_port_link_registered = false; | |
| struct dsa_switch *ds = dp->ds; | |
| bool dsa_port_enabled = false; | |
| int err = 0; | |
| if (dp->setup) | |
| return 0; | |
| err = dsa_port_devlink_setup(dp); | |
| if (err) | |
| return err; | |
| switch (dp->type) { | |
| case DSA_PORT_TYPE_UNUSED: | |
| dsa_port_disable(dp); | |
| break; | |
| case DSA_PORT_TYPE_CPU: | |
| if (dp->dn) { | |
| err = dsa_shared_port_link_register_of(dp); | |
| if (err) | |
| break; | |
| dsa_port_link_registered = true; | |
| } else { | |
| dev_warn(ds->dev, | |
| "skipping link registration for CPU port %d\n", | |
| dp->index); | |
| } | |
| err = dsa_port_enable(dp, NULL); | |
| if (err) | |
| break; | |
| dsa_port_enabled = true; | |
| break; | |
| case DSA_PORT_TYPE_DSA: | |
| if (dp->dn) { | |
| err = dsa_shared_port_link_register_of(dp); | |
| if (err) | |
| break; | |
| dsa_port_link_registered = true; | |
| } else { | |
| dev_warn(ds->dev, | |
| "skipping link registration for DSA port %d\n", | |
| dp->index); | |
| } | |
| err = dsa_port_enable(dp, NULL); | |
| if (err) | |
| break; | |
| dsa_port_enabled = true; | |
| break; | |
| case DSA_PORT_TYPE_USER: | |
| of_get_mac_address(dp->dn, dp->mac); | |
| err = dsa_user_create(dp); | |
| break; | |
| } | |
| if (err && dsa_port_enabled) | |
| dsa_port_disable(dp); | |
| if (err && dsa_port_link_registered) | |
| dsa_shared_port_link_unregister_of(dp); | |
| if (err) { | |
| dsa_port_devlink_teardown(dp); | |
| return err; | |
| } | |
| dp->setup = true; | |
| return 0; | |
| } | |
| static void dsa_port_teardown(struct dsa_port *dp) | |
| { | |
| if (!dp->setup) | |
| return; | |
| switch (dp->type) { | |
| case DSA_PORT_TYPE_UNUSED: | |
| break; | |
| case DSA_PORT_TYPE_CPU: | |
| dsa_port_disable(dp); | |
| if (dp->dn) | |
| dsa_shared_port_link_unregister_of(dp); | |
| break; | |
| case DSA_PORT_TYPE_DSA: | |
| dsa_port_disable(dp); | |
| if (dp->dn) | |
| dsa_shared_port_link_unregister_of(dp); | |
| break; | |
| case DSA_PORT_TYPE_USER: | |
| if (dp->user) { | |
| dsa_user_destroy(dp->user); | |
| dp->user = NULL; | |
| } | |
| break; | |
| } | |
| dsa_port_devlink_teardown(dp); | |
| dp->setup = false; | |
| } | |
| static int dsa_port_setup_as_unused(struct dsa_port *dp) | |
| { | |
| dp->type = DSA_PORT_TYPE_UNUSED; | |
| return dsa_port_setup(dp); | |
| } | |
| static int dsa_switch_setup_tag_protocol(struct dsa_switch *ds) | |
| { | |
| const struct dsa_device_ops *tag_ops = ds->dst->tag_ops; | |
| struct dsa_switch_tree *dst = ds->dst; | |
| int err; | |
| if (tag_ops->proto == dst->default_proto) | |
| goto connect; | |
| rtnl_lock(); | |
| err = ds->ops->change_tag_protocol(ds, tag_ops->proto); | |
| rtnl_unlock(); | |
| if (err) { | |
| dev_err(ds->dev, "Unable to use tag protocol \"%s\": %pe\n", | |
| tag_ops->name, ERR_PTR(err)); | |
| return err; | |
| } | |
| connect: | |
| if (tag_ops->connect) { | |
| err = tag_ops->connect(ds); | |
| if (err) | |
| return err; | |
| } | |
| if (ds->ops->connect_tag_protocol) { | |
| err = ds->ops->connect_tag_protocol(ds, tag_ops->proto); | |
| if (err) { | |
| dev_err(ds->dev, | |
| "Unable to connect to tag protocol \"%s\": %pe\n", | |
| tag_ops->name, ERR_PTR(err)); | |
| goto disconnect; | |
| } | |
| } | |
| return 0; | |
| disconnect: | |
| if (tag_ops->disconnect) | |
| tag_ops->disconnect(ds); | |
| return err; | |
| } | |
| static void dsa_switch_teardown_tag_protocol(struct dsa_switch *ds) | |
| { | |
| const struct dsa_device_ops *tag_ops = ds->dst->tag_ops; | |
| if (tag_ops->disconnect) | |
| tag_ops->disconnect(ds); | |
| } | |
| static int dsa_switch_setup(struct dsa_switch *ds) | |
| { | |
| int err; | |
| if (ds->setup) | |
| return 0; | |
| /* Initialize ds->phys_mii_mask before registering the user MDIO bus | |
| * driver and before ops->setup() has run, since the switch drivers and | |
| * the user MDIO bus driver rely on these values for probing PHY | |
| * devices or not | |
| */ | |
| ds->phys_mii_mask |= dsa_user_ports(ds); | |
| err = dsa_switch_devlink_alloc(ds); | |
| if (err) | |
| return err; | |
| err = dsa_switch_register_notifier(ds); | |
| if (err) | |
| goto devlink_free; | |
| ds->configure_vlan_while_not_filtering = true; | |
| err = ds->ops->setup(ds); | |
| if (err < 0) | |
| goto unregister_notifier; | |
| err = dsa_switch_setup_tag_protocol(ds); | |
| if (err) | |
| goto teardown; | |
| if (!ds->user_mii_bus && ds->ops->phy_read) { | |
| ds->user_mii_bus = mdiobus_alloc(); | |
| if (!ds->user_mii_bus) { | |
| err = -ENOMEM; | |
| goto teardown; | |
| } | |
| dsa_user_mii_bus_init(ds); | |
| err = mdiobus_register(ds->user_mii_bus); | |
| if (err < 0) | |
| goto free_user_mii_bus; | |
| } | |
| dsa_switch_devlink_register(ds); | |
| ds->setup = true; | |
| return 0; | |
| free_user_mii_bus: | |
| if (ds->user_mii_bus && ds->ops->phy_read) | |
| mdiobus_free(ds->user_mii_bus); | |
| teardown: | |
| if (ds->ops->teardown) | |
| ds->ops->teardown(ds); | |
| unregister_notifier: | |
| dsa_switch_unregister_notifier(ds); | |
| devlink_free: | |
| dsa_switch_devlink_free(ds); | |
| return err; | |
| } | |
| static void dsa_switch_teardown(struct dsa_switch *ds) | |
| { | |
| if (!ds->setup) | |
| return; | |
| dsa_switch_devlink_unregister(ds); | |
| if (ds->user_mii_bus && ds->ops->phy_read) { | |
| mdiobus_unregister(ds->user_mii_bus); | |
| mdiobus_free(ds->user_mii_bus); | |
| ds->user_mii_bus = NULL; | |
| } | |
| dsa_switch_teardown_tag_protocol(ds); | |
| if (ds->ops->teardown) | |
| ds->ops->teardown(ds); | |
| dsa_switch_unregister_notifier(ds); | |
| dsa_switch_devlink_free(ds); | |
| ds->setup = false; | |
| } | |
| /* First tear down the non-shared, then the shared ports. This ensures that | |
| * all work items scheduled by our switchdev handlers for user ports have | |
| * completed before we destroy the refcounting kept on the shared ports. | |
| */ | |
| static void dsa_tree_teardown_ports(struct dsa_switch_tree *dst) | |
| { | |
| struct dsa_port *dp; | |
| list_for_each_entry(dp, &dst->ports, list) | |
| if (dsa_port_is_user(dp) || dsa_port_is_unused(dp)) | |
| dsa_port_teardown(dp); | |
| dsa_flush_workqueue(); | |
| list_for_each_entry(dp, &dst->ports, list) | |
| if (dsa_port_is_dsa(dp) || dsa_port_is_cpu(dp)) | |
| dsa_port_teardown(dp); | |
| } | |
| static void dsa_tree_teardown_switches(struct dsa_switch_tree *dst) | |
| { | |
| struct dsa_port *dp; | |
| list_for_each_entry(dp, &dst->ports, list) | |
| dsa_switch_teardown(dp->ds); | |
| } | |
| /* Bring shared ports up first, then non-shared ports */ | |
| static int dsa_tree_setup_ports(struct dsa_switch_tree *dst) | |
| { | |
| struct dsa_port *dp; | |
| int err = 0; | |
| list_for_each_entry(dp, &dst->ports, list) { | |
| if (dsa_port_is_dsa(dp) || dsa_port_is_cpu(dp)) { | |
| err = dsa_port_setup(dp); | |
| if (err) | |
| goto teardown; | |
| } | |
| } | |
| list_for_each_entry(dp, &dst->ports, list) { | |
| if (dsa_port_is_user(dp) || dsa_port_is_unused(dp)) { | |
| err = dsa_port_setup(dp); | |
| if (err) { | |
| err = dsa_port_setup_as_unused(dp); | |
| if (err) | |
| goto teardown; | |
| } | |
| } | |
| } | |
| return 0; | |
| teardown: | |
| dsa_tree_teardown_ports(dst); | |
| return err; | |
| } | |
| static int dsa_tree_setup_switches(struct dsa_switch_tree *dst) | |
| { | |
| struct dsa_port *dp; | |
| int err = 0; | |
| list_for_each_entry(dp, &dst->ports, list) { | |
| err = dsa_switch_setup(dp->ds); | |
| if (err) { | |
| dsa_tree_teardown_switches(dst); | |
| break; | |
| } | |
| } | |
| return err; | |
| } | |
| static int dsa_tree_setup_conduit(struct dsa_switch_tree *dst) | |
| { | |
| struct dsa_port *cpu_dp; | |
| int err = 0; | |
| rtnl_lock(); | |
| dsa_tree_for_each_cpu_port(cpu_dp, dst) { | |
| struct net_device *conduit = cpu_dp->conduit; | |
| bool admin_up = (conduit->flags & IFF_UP) && | |
| !qdisc_tx_is_noop(conduit); | |
| err = dsa_conduit_setup(conduit, cpu_dp); | |
| if (err) | |
| break; | |
| /* Replay conduit state event */ | |
| dsa_tree_conduit_admin_state_change(dst, conduit, admin_up); | |
| dsa_tree_conduit_oper_state_change(dst, conduit, | |
| netif_oper_up(conduit)); | |
| } | |
| rtnl_unlock(); | |
| return err; | |
| } | |
| static void dsa_tree_teardown_conduit(struct dsa_switch_tree *dst) | |
| { | |
| struct dsa_port *cpu_dp; | |
| rtnl_lock(); | |
| dsa_tree_for_each_cpu_port(cpu_dp, dst) { | |
| struct net_device *conduit = cpu_dp->conduit; | |
| /* Synthesizing an "admin down" state is sufficient for | |
| * the switches to get a notification if the conduit is | |
| * currently up and running. | |
| */ | |
| dsa_tree_conduit_admin_state_change(dst, conduit, false); | |
| dsa_conduit_teardown(conduit); | |
| } | |
| rtnl_unlock(); | |
| } | |
| static int dsa_tree_setup_lags(struct dsa_switch_tree *dst) | |
| { | |
| unsigned int len = 0; | |
| struct dsa_port *dp; | |
| list_for_each_entry(dp, &dst->ports, list) { | |
| if (dp->ds->num_lag_ids > len) | |
| len = dp->ds->num_lag_ids; | |
| } | |
| if (!len) | |
| return 0; | |
| dst->lags = kzalloc_objs(*dst->lags, len); | |
| if (!dst->lags) | |
| return -ENOMEM; | |
| dst->lags_len = len; | |
| return 0; | |
| } | |
| static void dsa_tree_teardown_lags(struct dsa_switch_tree *dst) | |
| { | |
| kfree(dst->lags); | |
| } | |
| static void dsa_tree_teardown_routing_table(struct dsa_switch_tree *dst) | |
| { | |
| struct dsa_link *dl, *next; | |
| list_for_each_entry_safe(dl, next, &dst->rtable, list) { | |
| list_del(&dl->list); | |
| kfree(dl); | |
| } | |
| } | |
| static int dsa_tree_setup(struct dsa_switch_tree *dst) | |
| { | |
| bool complete; | |
| int err; | |
| if (dst->setup) { | |
| pr_err("DSA: tree %d already setup! Disjoint trees?\n", | |
| dst->index); | |
| return -EEXIST; | |
| } | |
| complete = dsa_tree_setup_routing_table(dst); | |
| if (!complete) | |
| return 0; | |
| err = dsa_tree_setup_cpu_ports(dst); | |
| if (err) | |
| goto teardown_rtable; | |
| err = dsa_tree_setup_switches(dst); | |
| if (err) | |
| goto teardown_cpu_ports; | |
| err = dsa_tree_setup_ports(dst); | |
| if (err) | |
| goto teardown_switches; | |
| err = dsa_tree_setup_conduit(dst); | |
| if (err) | |
| goto teardown_ports; | |
| err = dsa_tree_setup_lags(dst); | |
| if (err) | |
| goto teardown_conduit; | |
| dst->setup = true; | |
| pr_info("DSA: tree %d setup\n", dst->index); | |
| return 0; | |
| teardown_conduit: | |
| dsa_tree_teardown_conduit(dst); | |
| teardown_ports: | |
| dsa_tree_teardown_ports(dst); | |
| teardown_switches: | |
| dsa_tree_teardown_switches(dst); | |
| teardown_cpu_ports: | |
| dsa_tree_teardown_cpu_ports(dst); | |
| teardown_rtable: | |
| dsa_tree_teardown_routing_table(dst); | |
| return err; | |
| } | |
| static void dsa_tree_teardown(struct dsa_switch_tree *dst) | |
| { | |
| if (!dst->setup) | |
| return; | |
| dsa_tree_teardown_lags(dst); | |
| dsa_tree_teardown_conduit(dst); | |
| dsa_tree_teardown_ports(dst); | |
| dsa_tree_teardown_switches(dst); | |
| dsa_tree_teardown_cpu_ports(dst); | |
| dsa_tree_teardown_routing_table(dst); | |
| pr_info("DSA: tree %d torn down\n", dst->index); | |
| dst->setup = false; | |
| } | |
| static int dsa_tree_bind_tag_proto(struct dsa_switch_tree *dst, | |
| const struct dsa_device_ops *tag_ops) | |
| { | |
| const struct dsa_device_ops *old_tag_ops = dst->tag_ops; | |
| struct dsa_notifier_tag_proto_info info; | |
| int err; | |
| dst->tag_ops = tag_ops; | |
| /* Notify the switches from this tree about the connection | |
| * to the new tagger | |
| */ | |
| info.tag_ops = tag_ops; | |
| err = dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO_CONNECT, &info); | |
| if (err && err != -EOPNOTSUPP) | |
| goto out_disconnect; | |
| /* Notify the old tagger about the disconnection from this tree */ | |
| info.tag_ops = old_tag_ops; | |
| dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO_DISCONNECT, &info); | |
| return 0; | |
| out_disconnect: | |
| info.tag_ops = tag_ops; | |
| dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO_DISCONNECT, &info); | |
| dst->tag_ops = old_tag_ops; | |
| return err; | |
| } | |
| /* Since the dsa/tagging sysfs device attribute is per conduit, the assumption | |
| * is that all DSA switches within a tree share the same tagger, otherwise | |
| * they would have formed disjoint trees (different "dsa,member" values). | |
| */ | |
| int dsa_tree_change_tag_proto(struct dsa_switch_tree *dst, | |
| const struct dsa_device_ops *tag_ops, | |
| const struct dsa_device_ops *old_tag_ops) | |
| { | |
| struct dsa_notifier_tag_proto_info info; | |
| struct dsa_port *dp; | |
| int err = -EBUSY; | |
| if (!rtnl_trylock()) | |
| return restart_syscall(); | |
| /* At the moment we don't allow changing the tag protocol under | |
| * traffic. The rtnl_mutex also happens to serialize concurrent | |
| * attempts to change the tagging protocol. If we ever lift the IFF_UP | |
| * restriction, there needs to be another mutex which serializes this. | |
| */ | |
| dsa_tree_for_each_user_port(dp, dst) { | |
| if (dsa_port_to_conduit(dp)->flags & IFF_UP) | |
| goto out_unlock; | |
| if (dp->user->flags & IFF_UP) | |
| goto out_unlock; | |
| } | |
| /* Notify the tag protocol change */ | |
| info.tag_ops = tag_ops; | |
| err = dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO, &info); | |
| if (err) | |
| goto out_unwind_tagger; | |
| err = dsa_tree_bind_tag_proto(dst, tag_ops); | |
| if (err) | |
| goto out_unwind_tagger; | |
| rtnl_unlock(); | |
| return 0; | |
| out_unwind_tagger: | |
| info.tag_ops = old_tag_ops; | |
| dsa_tree_notify(dst, DSA_NOTIFIER_TAG_PROTO, &info); | |
| out_unlock: | |
| rtnl_unlock(); | |
| return err; | |
| } | |
| static void dsa_tree_conduit_state_change(struct dsa_switch_tree *dst, | |
| struct net_device *conduit) | |
| { | |
| struct dsa_notifier_conduit_state_info info; | |
| struct dsa_port *cpu_dp = conduit->dsa_ptr; | |
| info.conduit = conduit; | |
| info.operational = dsa_port_conduit_is_operational(cpu_dp); | |
| dsa_tree_notify(dst, DSA_NOTIFIER_CONDUIT_STATE_CHANGE, &info); | |
| } | |
| void dsa_tree_conduit_admin_state_change(struct dsa_switch_tree *dst, | |
| struct net_device *conduit, | |
| bool up) | |
| { | |
| struct dsa_port *cpu_dp = conduit->dsa_ptr; | |
| bool notify = false; | |
| /* Don't keep track of admin state on LAG DSA conduits, | |
| * but rather just of physical DSA conduits | |
| */ | |
| if (netif_is_lag_master(conduit)) | |
| return; | |
| if ((dsa_port_conduit_is_operational(cpu_dp)) != | |
| (up && cpu_dp->conduit_oper_up)) | |
| notify = true; | |
| cpu_dp->conduit_admin_up = up; | |
| if (notify) | |
| dsa_tree_conduit_state_change(dst, conduit); | |
| } | |
| void dsa_tree_conduit_oper_state_change(struct dsa_switch_tree *dst, | |
| struct net_device *conduit, | |
| bool up) | |
| { | |
| struct dsa_port *cpu_dp = conduit->dsa_ptr; | |
| bool notify = false; | |
| /* Don't keep track of oper state on LAG DSA conduits, | |
| * but rather just of physical DSA conduits | |
| */ | |
| if (netif_is_lag_master(conduit)) | |
| return; | |
| if ((dsa_port_conduit_is_operational(cpu_dp)) != | |
| (cpu_dp->conduit_admin_up && up)) | |
| notify = true; | |
| cpu_dp->conduit_oper_up = up; | |
| if (notify) | |
| dsa_tree_conduit_state_change(dst, conduit); | |
| } | |
| static struct dsa_port *dsa_port_touch(struct dsa_switch *ds, int index) | |
| { | |
| struct dsa_switch_tree *dst = ds->dst; | |
| struct dsa_port *dp; | |
| dsa_switch_for_each_port(dp, ds) | |
| if (dp->index == index) | |
| return dp; | |
| dp = kzalloc_obj(*dp); | |
| if (!dp) | |
| return NULL; | |
| dp->ds = ds; | |
| dp->index = index; | |
| mutex_init(&dp->addr_lists_lock); | |
| mutex_init(&dp->vlans_lock); | |
| INIT_LIST_HEAD(&dp->fdbs); | |
| INIT_LIST_HEAD(&dp->mdbs); | |
| INIT_LIST_HEAD(&dp->vlans); /* also initializes &dp->user_vlans */ | |
| INIT_LIST_HEAD(&dp->list); | |
| list_add_tail(&dp->list, &dst->ports); | |
| return dp; | |
| } | |
| static int dsa_port_parse_user(struct dsa_port *dp, const char *name) | |
| { | |
| dp->type = DSA_PORT_TYPE_USER; | |
| dp->name = name; | |
| return 0; | |
| } | |
| static int dsa_port_parse_dsa(struct dsa_port *dp) | |
| { | |
| dp->type = DSA_PORT_TYPE_DSA; | |
| return 0; | |
| } | |
| static enum dsa_tag_protocol dsa_get_tag_protocol(struct dsa_port *dp, | |
| struct net_device *conduit) | |
| { | |
| enum dsa_tag_protocol tag_protocol = DSA_TAG_PROTO_NONE; | |
| struct dsa_switch *mds, *ds = dp->ds; | |
| unsigned int mdp_upstream; | |
| struct dsa_port *mdp; | |
| /* It is possible to stack DSA switches onto one another when that | |
| * happens the switch driver may want to know if its tagging protocol | |
| * is going to work in such a configuration. | |
| */ | |
| if (dsa_user_dev_check(conduit)) { | |
| mdp = dsa_user_to_port(conduit); | |
| mds = mdp->ds; | |
| mdp_upstream = dsa_upstream_port(mds, mdp->index); | |
| tag_protocol = mds->ops->get_tag_protocol(mds, mdp_upstream, | |
| DSA_TAG_PROTO_NONE); | |
| } | |
| /* If the conduit device is not itself a DSA user in a disjoint DSA | |
| * tree, then return immediately. | |
| */ | |
| return ds->ops->get_tag_protocol(ds, dp->index, tag_protocol); | |
| } | |
| static int dsa_port_parse_cpu(struct dsa_port *dp, struct net_device *conduit, | |
| const char *user_protocol) | |
| { | |
| const struct dsa_device_ops *tag_ops = NULL; | |
| struct dsa_switch *ds = dp->ds; | |
| struct dsa_switch_tree *dst = ds->dst; | |
| enum dsa_tag_protocol default_proto; | |
| /* Find out which protocol the switch would prefer. */ | |
| default_proto = dsa_get_tag_protocol(dp, conduit); | |
| if (dst->default_proto) { | |
| if (dst->default_proto != default_proto) { | |
| dev_err(ds->dev, | |
| "A DSA switch tree can have only one tagging protocol\n"); | |
| return -EINVAL; | |
| } | |
| } else { | |
| dst->default_proto = default_proto; | |
| } | |
| /* See if the user wants to override that preference. */ | |
| if (user_protocol) { | |
| if (!ds->ops->change_tag_protocol) { | |
| dev_err(ds->dev, "Tag protocol cannot be modified\n"); | |
| return -EINVAL; | |
| } | |
| tag_ops = dsa_tag_driver_get_by_name(user_protocol); | |
| if (IS_ERR(tag_ops)) { | |
| dev_warn(ds->dev, | |
| "Failed to find a tagging driver for protocol %s, using default\n", | |
| user_protocol); | |
| tag_ops = NULL; | |
| } | |
| } | |
| if (!tag_ops) | |
| tag_ops = dsa_tag_driver_get_by_id(default_proto); | |
| if (IS_ERR(tag_ops)) { | |
| if (PTR_ERR(tag_ops) == -ENOPROTOOPT) | |
| return -EPROBE_DEFER; | |
| dev_warn(ds->dev, "No tagger for this switch\n"); | |
| return PTR_ERR(tag_ops); | |
| } | |
| if (dst->tag_ops) { | |
| if (dst->tag_ops != tag_ops) { | |
| dev_err(ds->dev, | |
| "A DSA switch tree can have only one tagging protocol\n"); | |
| dsa_tag_driver_put(tag_ops); | |
| return -EINVAL; | |
| } | |
| /* In the case of multiple CPU ports per switch, the tagging | |
| * protocol is still reference-counted only per switch tree. | |
| */ | |
| dsa_tag_driver_put(tag_ops); | |
| } else { | |
| dst->tag_ops = tag_ops; | |
| } | |
| dp->conduit = conduit; | |
| dp->type = DSA_PORT_TYPE_CPU; | |
| dsa_port_set_tag_protocol(dp, dst->tag_ops); | |
| dp->dst = dst; | |
| /* At this point, the tree may be configured to use a different | |
| * tagger than the one chosen by the switch driver during | |
| * .setup, in the case when a user selects a custom protocol | |
| * through the DT. | |
| * | |
| * This is resolved by syncing the driver with the tree in | |
| * dsa_switch_setup_tag_protocol once .setup has run and the | |
| * driver is ready to accept calls to .change_tag_protocol. If | |
| * the driver does not support the custom protocol at that | |
| * point, the tree is wholly rejected, thereby ensuring that the | |
| * tree and driver are always in agreement on the protocol to | |
| * use. | |
| */ | |
| return 0; | |
| } | |
| static int dsa_port_parse_of(struct dsa_port *dp, struct device_node *dn) | |
| { | |
| struct device_node *ethernet = of_parse_phandle(dn, "ethernet", 0); | |
| const char *name = of_get_property(dn, "label", NULL); | |
| bool link = of_property_read_bool(dn, "link"); | |
| dp->dn = dn; | |
| if (ethernet) { | |
| struct net_device *conduit; | |
| const char *user_protocol; | |
| int err; | |
| rtnl_lock(); | |
| conduit = of_find_net_device_by_node(ethernet); | |
| of_node_put(ethernet); | |
| if (!conduit) { | |
| rtnl_unlock(); | |
| return -EPROBE_DEFER; | |
| } | |
| netdev_hold(conduit, &dp->conduit_tracker, GFP_KERNEL); | |
| put_device(&conduit->dev); | |
| rtnl_unlock(); | |
| user_protocol = of_get_property(dn, "dsa-tag-protocol", NULL); | |
| err = dsa_port_parse_cpu(dp, conduit, user_protocol); | |
| if (err) | |
| netdev_put(conduit, &dp->conduit_tracker); | |
| return err; | |
| } | |
| if (link) | |
| return dsa_port_parse_dsa(dp); | |
| return dsa_port_parse_user(dp, name); | |
| } | |
| static int dsa_switch_parse_ports_of(struct dsa_switch *ds, | |
| struct device_node *dn) | |
| { | |
| struct device_node *ports, *port; | |
| struct dsa_port *dp; | |
| int err = 0; | |
| u32 reg; | |
| ports = of_get_child_by_name(dn, "ports"); | |
| if (!ports) { | |
| /* The second possibility is "ethernet-ports" */ | |
| ports = of_get_child_by_name(dn, "ethernet-ports"); | |
| if (!ports) { | |
| dev_err(ds->dev, "no ports child node found\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| for_each_available_child_of_node(ports, port) { | |
| err = of_property_read_u32(port, "reg", ®); | |
| if (err) { | |
| of_node_put(port); | |
| goto out_put_node; | |
| } | |
| if (reg >= ds->num_ports) { | |
| dev_err(ds->dev, "port %pOF index %u exceeds num_ports (%u)\n", | |
| port, reg, ds->num_ports); | |
| of_node_put(port); | |
| err = -EINVAL; | |
| goto out_put_node; | |
| } | |
| dp = dsa_to_port(ds, reg); | |
| err = dsa_port_parse_of(dp, port); | |
| if (err) { | |
| of_node_put(port); | |
| goto out_put_node; | |
| } | |
| } | |
| out_put_node: | |
| of_node_put(ports); | |
| return err; | |
| } | |
| static int dsa_switch_parse_member_of(struct dsa_switch *ds, | |
| struct device_node *dn) | |
| { | |
| u32 m[2] = { 0, 0 }; | |
| int sz; | |
| /* Don't error out if this optional property isn't found */ | |
| sz = of_property_read_variable_u32_array(dn, "dsa,member", m, 2, 2); | |
| if (sz < 0 && sz != -EINVAL) | |
| return sz; | |
| ds->index = m[1]; | |
| ds->dst = dsa_tree_touch(m[0]); | |
| if (!ds->dst) | |
| return -ENOMEM; | |
| if (dsa_switch_find(ds->dst->index, ds->index)) { | |
| dev_err(ds->dev, | |
| "A DSA switch with index %d already exists in tree %d\n", | |
| ds->index, ds->dst->index); | |
| return -EEXIST; | |
| } | |
| if (ds->dst->last_switch < ds->index) | |
| ds->dst->last_switch = ds->index; | |
| return 0; | |
| } | |
| static int dsa_switch_touch_ports(struct dsa_switch *ds) | |
| { | |
| struct dsa_port *dp; | |
| int port; | |
| for (port = 0; port < ds->num_ports; port++) { | |
| dp = dsa_port_touch(ds, port); | |
| if (!dp) | |
| return -ENOMEM; | |
| } | |
| return 0; | |
| } | |
| static int dsa_switch_parse_of(struct dsa_switch *ds, struct device_node *dn) | |
| { | |
| int err; | |
| err = dsa_switch_parse_member_of(ds, dn); | |
| if (err) | |
| return err; | |
| err = dsa_switch_touch_ports(ds); | |
| if (err) | |
| return err; | |
| return dsa_switch_parse_ports_of(ds, dn); | |
| } | |
| static int dev_is_class(struct device *dev, const void *class) | |
| { | |
| if (dev->class && !strcmp(dev->class->name, class)) | |
| return 1; | |
| return 0; | |
| } | |
| static struct device *dev_find_class(struct device *parent, char *class) | |
| { | |
| if (dev_is_class(parent, class)) { | |
| get_device(parent); | |
| return parent; | |
| } | |
| return device_find_child(parent, class, dev_is_class); | |
| } | |
| static int dsa_port_parse(struct dsa_port *dp, const char *name, | |
| struct device *dev) | |
| { | |
| if (!strcmp(name, "cpu")) { | |
| struct net_device *conduit; | |
| struct device *d; | |
| int err; | |
| rtnl_lock(); | |
| d = dev_find_class(dev, "net"); | |
| if (!d) { | |
| rtnl_unlock(); | |
| return -EPROBE_DEFER; | |
| } | |
| conduit = to_net_dev(d); | |
| netdev_hold(conduit, &dp->conduit_tracker, GFP_KERNEL); | |
| put_device(d); | |
| rtnl_unlock(); | |
| err = dsa_port_parse_cpu(dp, conduit, NULL); | |
| if (err) | |
| netdev_put(conduit, &dp->conduit_tracker); | |
| return err; | |
| } | |
| if (!strcmp(name, "dsa")) | |
| return dsa_port_parse_dsa(dp); | |
| return dsa_port_parse_user(dp, name); | |
| } | |
| static int dsa_switch_parse_ports(struct dsa_switch *ds, | |
| struct dsa_chip_data *cd) | |
| { | |
| bool valid_name_found = false; | |
| struct dsa_port *dp; | |
| struct device *dev; | |
| const char *name; | |
| unsigned int i; | |
| int err; | |
| for (i = 0; i < DSA_MAX_PORTS; i++) { | |
| name = cd->port_names[i]; | |
| dev = cd->netdev[i]; | |
| dp = dsa_to_port(ds, i); | |
| if (!name) | |
| continue; | |
| err = dsa_port_parse(dp, name, dev); | |
| if (err) | |
| return err; | |
| valid_name_found = true; | |
| } | |
| if (!valid_name_found && i == DSA_MAX_PORTS) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static int dsa_switch_parse(struct dsa_switch *ds, struct dsa_chip_data *cd) | |
| { | |
| int err; | |
| ds->cd = cd; | |
| /* We don't support interconnected switches nor multiple trees via | |
| * platform data, so this is the unique switch of the tree. | |
| */ | |
| ds->index = 0; | |
| ds->dst = dsa_tree_touch(0); | |
| if (!ds->dst) | |
| return -ENOMEM; | |
| err = dsa_switch_touch_ports(ds); | |
| if (err) | |
| return err; | |
| return dsa_switch_parse_ports(ds, cd); | |
| } | |
| static void dsa_switch_release_ports(struct dsa_switch *ds) | |
| { | |
| struct dsa_mac_addr *a, *tmp; | |
| struct dsa_port *dp, *next; | |
| struct dsa_vlan *v, *n; | |
| dsa_switch_for_each_port_safe(dp, next, ds) { | |
| if (dsa_port_is_cpu(dp) && dp->conduit) | |
| netdev_put(dp->conduit, &dp->conduit_tracker); | |
| /* These are either entries that upper layers lost track of | |
| * (probably due to bugs), or installed through interfaces | |
| * where one does not necessarily have to remove them, like | |
| * ndo_dflt_fdb_add(). | |
| */ | |
| list_for_each_entry_safe(a, tmp, &dp->fdbs, list) { | |
| dev_info(ds->dev, | |
| "Cleaning up unicast address %pM vid %u from port %d\n", | |
| a->addr, a->vid, dp->index); | |
| list_del(&a->list); | |
| kfree(a); | |
| } | |
| list_for_each_entry_safe(a, tmp, &dp->mdbs, list) { | |
| dev_info(ds->dev, | |
| "Cleaning up multicast address %pM vid %u from port %d\n", | |
| a->addr, a->vid, dp->index); | |
| list_del(&a->list); | |
| kfree(a); | |
| } | |
| /* These are entries that upper layers have lost track of, | |
| * probably due to bugs, but also due to dsa_port_do_vlan_del() | |
| * having failed and the VLAN entry still lingering on. | |
| */ | |
| list_for_each_entry_safe(v, n, &dp->vlans, list) { | |
| dev_info(ds->dev, | |
| "Cleaning up vid %u from port %d\n", | |
| v->vid, dp->index); | |
| list_del(&v->list); | |
| kfree(v); | |
| } | |
| list_del(&dp->list); | |
| kfree(dp); | |
| } | |
| } | |
| static int dsa_switch_probe(struct dsa_switch *ds) | |
| { | |
| struct dsa_switch_tree *dst; | |
| struct dsa_chip_data *pdata; | |
| struct device_node *np; | |
| int err; | |
| if (!ds->dev) | |
| return -ENODEV; | |
| pdata = ds->dev->platform_data; | |
| np = ds->dev->of_node; | |
| if (!ds->num_ports) | |
| return -EINVAL; | |
| if (np) { | |
| err = dsa_switch_parse_of(ds, np); | |
| if (err) | |
| dsa_switch_release_ports(ds); | |
| } else if (pdata) { | |
| err = dsa_switch_parse(ds, pdata); | |
| if (err) | |
| dsa_switch_release_ports(ds); | |
| } else { | |
| err = -ENODEV; | |
| } | |
| if (err) | |
| return err; | |
| dst = ds->dst; | |
| dsa_tree_get(dst); | |
| err = dsa_tree_setup(dst); | |
| if (err) { | |
| dsa_switch_release_ports(ds); | |
| dsa_tree_put(dst); | |
| } | |
| return err; | |
| } | |
| int dsa_register_switch(struct dsa_switch *ds) | |
| { | |
| int err; | |
| mutex_lock(&dsa2_mutex); | |
| err = dsa_switch_probe(ds); | |
| dsa_tree_put(ds->dst); | |
| mutex_unlock(&dsa2_mutex); | |
| return err; | |
| } | |
| EXPORT_SYMBOL_GPL(dsa_register_switch); | |
| static void dsa_switch_remove(struct dsa_switch *ds) | |
| { | |
| struct dsa_switch_tree *dst = ds->dst; | |
| dsa_tree_teardown(dst); | |
| dsa_switch_release_ports(ds); | |
| dsa_tree_put(dst); | |
| } | |
| void dsa_unregister_switch(struct dsa_switch *ds) | |
| { | |
| mutex_lock(&dsa2_mutex); | |
| dsa_switch_remove(ds); | |
| mutex_unlock(&dsa2_mutex); | |
| } | |
| EXPORT_SYMBOL_GPL(dsa_unregister_switch); | |
| /* If the DSA conduit chooses to unregister its net_device on .shutdown, DSA is | |
| * blocking that operation from completion, due to the dev_hold taken inside | |
| * netdev_upper_dev_link. Unlink the DSA user interfaces from being uppers of | |
| * the DSA conduit, so that the system can reboot successfully. | |
| */ | |
| void dsa_switch_shutdown(struct dsa_switch *ds) | |
| { | |
| struct net_device *conduit, *user_dev; | |
| LIST_HEAD(close_list); | |
| struct dsa_port *dp; | |
| mutex_lock(&dsa2_mutex); | |
| if (!ds->setup) | |
| goto out; | |
| rtnl_lock(); | |
| dsa_switch_for_each_cpu_port(dp, ds) { | |
| if (!(dp->conduit->flags & IFF_UP)) | |
| continue; | |
| list_add_tail(&dp->conduit->close_list, &close_list); | |
| netdev_lock_ops(dp->conduit); | |
| } | |
| netif_close_many(&close_list, false); | |
| while (!list_empty(&close_list)) { | |
| struct net_device *conduit; | |
| conduit = list_first_entry(&close_list, struct net_device, | |
| close_list); | |
| netdev_unlock_ops(conduit); | |
| list_del_init(&conduit->close_list); | |
| } | |
| dsa_switch_for_each_user_port(dp, ds) { | |
| conduit = dsa_port_to_conduit(dp); | |
| user_dev = dp->user; | |
| netif_device_detach(user_dev); | |
| netdev_upper_dev_unlink(conduit, user_dev); | |
| } | |
| /* Disconnect from further netdevice notifiers on the conduit, | |
| * since netdev_uses_dsa() will now return false. | |
| */ | |
| dsa_switch_for_each_cpu_port(dp, ds) { | |
| dp->conduit->dsa_ptr = NULL; | |
| netdev_put(dp->conduit, &dp->conduit_tracker); | |
| } | |
| rtnl_unlock(); | |
| out: | |
| mutex_unlock(&dsa2_mutex); | |
| } | |
| EXPORT_SYMBOL_GPL(dsa_switch_shutdown); | |
| #ifdef CONFIG_PM_SLEEP | |
| static bool dsa_port_is_initialized(const struct dsa_port *dp) | |
| { | |
| return dp->type == DSA_PORT_TYPE_USER && dp->user; | |
| } | |
| int dsa_switch_suspend(struct dsa_switch *ds) | |
| { | |
| struct dsa_port *dp; | |
| int ret = 0; | |
| /* Suspend user network devices */ | |
| dsa_switch_for_each_port(dp, ds) { | |
| if (!dsa_port_is_initialized(dp)) | |
| continue; | |
| ret = dsa_user_suspend(dp->user); | |
| if (ret) | |
| return ret; | |
| } | |
| if (ds->ops->suspend) | |
| ret = ds->ops->suspend(ds); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_GPL(dsa_switch_suspend); | |
| int dsa_switch_resume(struct dsa_switch *ds) | |
| { | |
| struct dsa_port *dp; | |
| int ret = 0; | |
| if (ds->ops->resume) | |
| ret = ds->ops->resume(ds); | |
| if (ret) | |
| return ret; | |
| /* Resume user network devices */ | |
| dsa_switch_for_each_port(dp, ds) { | |
| if (!dsa_port_is_initialized(dp)) | |
| continue; | |
| ret = dsa_user_resume(dp->user); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(dsa_switch_resume); | |
| #endif | |
| struct dsa_port *dsa_port_from_netdev(struct net_device *netdev) | |
| { | |
| if (!netdev || !dsa_user_dev_check(netdev)) | |
| return ERR_PTR(-ENODEV); | |
| return dsa_user_to_port(netdev); | |
| } | |
| EXPORT_SYMBOL_GPL(dsa_port_from_netdev); | |
| bool dsa_db_equal(const struct dsa_db *a, const struct dsa_db *b) | |
| { | |
| if (a->type != b->type) | |
| return false; | |
| switch (a->type) { | |
| case DSA_DB_PORT: | |
| return a->dp == b->dp; | |
| case DSA_DB_LAG: | |
| return a->lag.dev == b->lag.dev; | |
| case DSA_DB_BRIDGE: | |
| return a->bridge.num == b->bridge.num; | |
| default: | |
| WARN_ON(1); | |
| return false; | |
| } | |
| } | |
| bool dsa_fdb_present_in_other_db(struct dsa_switch *ds, int port, | |
| const unsigned char *addr, u16 vid, | |
| struct dsa_db db) | |
| { | |
| struct dsa_port *dp = dsa_to_port(ds, port); | |
| struct dsa_mac_addr *a; | |
| lockdep_assert_held(&dp->addr_lists_lock); | |
| list_for_each_entry(a, &dp->fdbs, list) { | |
| if (!ether_addr_equal(a->addr, addr) || a->vid != vid) | |
| continue; | |
| if (a->db.type == db.type && !dsa_db_equal(&a->db, &db)) | |
| return true; | |
| } | |
| return false; | |
| } | |
| EXPORT_SYMBOL_GPL(dsa_fdb_present_in_other_db); | |
| bool dsa_mdb_present_in_other_db(struct dsa_switch *ds, int port, | |
| const struct switchdev_obj_port_mdb *mdb, | |
| struct dsa_db db) | |
| { | |
| struct dsa_port *dp = dsa_to_port(ds, port); | |
| struct dsa_mac_addr *a; | |
| lockdep_assert_held(&dp->addr_lists_lock); | |
| list_for_each_entry(a, &dp->mdbs, list) { | |
| if (!ether_addr_equal(a->addr, mdb->addr) || a->vid != mdb->vid) | |
| continue; | |
| if (a->db.type == db.type && !dsa_db_equal(&a->db, &db)) | |
| return true; | |
| } | |
| return false; | |
| } | |
| EXPORT_SYMBOL_GPL(dsa_mdb_present_in_other_db); | |
| /* Helpers for switches without specific HSR offloads, but which can implement | |
| * NETIF_F_HW_HSR_DUP because their tagger uses dsa_xmit_port_mask() | |
| */ | |
| int dsa_port_simple_hsr_validate(struct dsa_switch *ds, int port, | |
| struct net_device *hsr, | |
| struct netlink_ext_ack *extack) | |
| { | |
| enum hsr_port_type type; | |
| int err; | |
| err = hsr_get_port_type(hsr, dsa_to_port(ds, port)->user, &type); | |
| if (err) | |
| return err; | |
| if (type != HSR_PT_SLAVE_A && type != HSR_PT_SLAVE_B) { | |
| NL_SET_ERR_MSG_MOD(extack, | |
| "Only HSR slave ports can be offloaded"); | |
| return -EOPNOTSUPP; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(dsa_port_simple_hsr_validate); | |
| int dsa_port_simple_hsr_join(struct dsa_switch *ds, int port, | |
| struct net_device *hsr, | |
| struct netlink_ext_ack *extack) | |
| { | |
| struct dsa_port *dp = dsa_to_port(ds, port), *other_dp; | |
| int err; | |
| err = dsa_port_simple_hsr_validate(ds, port, hsr, extack); | |
| if (err) | |
| return err; | |
| dsa_hsr_foreach_port(other_dp, ds, hsr) { | |
| if (other_dp != dp) { | |
| dp->user->features |= NETIF_F_HW_HSR_DUP; | |
| other_dp->user->features |= NETIF_F_HW_HSR_DUP; | |
| break; | |
| } | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(dsa_port_simple_hsr_join); | |
| int dsa_port_simple_hsr_leave(struct dsa_switch *ds, int port, | |
| struct net_device *hsr) | |
| { | |
| struct dsa_port *dp = dsa_to_port(ds, port), *other_dp; | |
| dsa_hsr_foreach_port(other_dp, ds, hsr) { | |
| if (other_dp != dp) { | |
| dp->user->features &= ~NETIF_F_HW_HSR_DUP; | |
| other_dp->user->features &= ~NETIF_F_HW_HSR_DUP; | |
| break; | |
| } | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(dsa_port_simple_hsr_leave); | |
| static const struct dsa_stubs __dsa_stubs = { | |
| .conduit_hwtstamp_validate = __dsa_conduit_hwtstamp_validate, | |
| }; | |
| static void dsa_register_stubs(void) | |
| { | |
| dsa_stubs = &__dsa_stubs; | |
| } | |
| static void dsa_unregister_stubs(void) | |
| { | |
| dsa_stubs = NULL; | |
| } | |
| static int __init dsa_init_module(void) | |
| { | |
| int rc; | |
| dsa_owq = alloc_ordered_workqueue("dsa_ordered", | |
| WQ_MEM_RECLAIM); | |
| if (!dsa_owq) | |
| return -ENOMEM; | |
| rc = dsa_user_register_notifier(); | |
| if (rc) | |
| goto register_notifier_fail; | |
| dev_add_pack(&dsa_pack_type); | |
| rc = rtnl_link_register(&dsa_link_ops); | |
| if (rc) | |
| goto netlink_register_fail; | |
| dsa_register_stubs(); | |
| return 0; | |
| netlink_register_fail: | |
| dsa_user_unregister_notifier(); | |
| dev_remove_pack(&dsa_pack_type); | |
| register_notifier_fail: | |
| destroy_workqueue(dsa_owq); | |
| return rc; | |
| } | |
| module_init(dsa_init_module); | |
| static void __exit dsa_cleanup_module(void) | |
| { | |
| dsa_unregister_stubs(); | |
| rtnl_link_unregister(&dsa_link_ops); | |
| dsa_user_unregister_notifier(); | |
| dev_remove_pack(&dsa_pack_type); | |
| destroy_workqueue(dsa_owq); | |
| } | |
| module_exit(dsa_cleanup_module); | |
| MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>"); | |
| MODULE_DESCRIPTION("Driver for Distributed Switch Architecture switch chips"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_ALIAS("platform:dsa"); | |
| MODULE_IMPORT_NS("NETDEV_INTERNAL"); |