| // SPDX-License-Identifier: GPL-2.0 | |
| /* Copyright (C) B.A.T.M.A.N. contributors: | |
| * | |
| * Marek Lindner, Simon Wunderlich | |
| */ | |
| #include "mesh-interface.h" | |
| #include "main.h" | |
| #include <linux/atomic.h> | |
| #include <linux/bug.h> | |
| #include <linux/byteorder/generic.h> | |
| #include <linux/cache.h> | |
| #include <linux/compiler.h> | |
| #include <linux/container_of.h> | |
| #include <linux/cpumask.h> | |
| #include <linux/errno.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/gfp.h> | |
| #include <linux/if_ether.h> | |
| #include <linux/if_vlan.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/kref.h> | |
| #include <linux/list.h> | |
| #include <linux/lockdep.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/netlink.h> | |
| #include <linux/percpu.h> | |
| #include <linux/random.h> | |
| #include <linux/rculist.h> | |
| #include <linux/rcupdate.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/slab.h> | |
| #include <linux/socket.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/stddef.h> | |
| #include <linux/string.h> | |
| #include <linux/types.h> | |
| #include <linux/utsname.h> | |
| #include <net/netlink.h> | |
| #include <net/rtnetlink.h> | |
| #include <uapi/linux/batadv_packet.h> | |
| #include <uapi/linux/batman_adv.h> | |
| #include "bat_algo.h" | |
| #include "bridge_loop_avoidance.h" | |
| #include "distributed-arp-table.h" | |
| #include "gateway_client.h" | |
| #include "hard-interface.h" | |
| #include "multicast.h" | |
| #include "send.h" | |
| #include "translation-table.h" | |
| /** | |
| * batadv_skb_head_push() - Increase header size and move (push) head pointer | |
| * @skb: packet buffer which should be modified | |
| * @len: number of bytes to add | |
| * | |
| * Warning: This function may reallocate the skb data buffer via | |
| * skb_cow_head()/... Any pointer into the skb data (e.g. obtained | |
| * from skb->data or eth_hdr()) before this call must be considered | |
| * invalid afterwards and has to be reacquired. | |
| * | |
| * Return: 0 on success or negative error number in case of failure | |
| */ | |
| int batadv_skb_head_push(struct sk_buff *skb, unsigned int len) | |
| { | |
| int result; | |
| /* TODO: We must check if we can release all references to non-payload | |
| * data using __skb_header_release in our skbs to allow skb_cow_header | |
| * to work optimally. This means that those skbs are not allowed to read | |
| * or write any data which is before the current position of skb->data | |
| * after that call and thus allow other skbs with the same data buffer | |
| * to write freely in that area. | |
| */ | |
| result = skb_cow_head(skb, len); | |
| if (result < 0) | |
| return result; | |
| skb_push(skb, len); | |
| return 0; | |
| } | |
| /** | |
| * batadv_sum_counter() - Sum the cpu-local counters for index 'idx' | |
| * @bat_priv: the bat priv with all the mesh interface information | |
| * @idx: index of counter to sum up | |
| * | |
| * Return: sum of all cpu-local counters | |
| */ | |
| static u64 batadv_sum_counter(struct batadv_priv *bat_priv, size_t idx) | |
| { | |
| u64 *counters; | |
| u64 sum = 0; | |
| int cpu; | |
| for_each_possible_cpu(cpu) { | |
| counters = per_cpu_ptr(bat_priv->bat_counters, cpu); | |
| sum += counters[idx]; | |
| } | |
| return sum; | |
| } | |
| /** | |
| * batadv_interface_stats() - return netdev stats for a mesh interface | |
| * @dev: the mesh interface to query | |
| * | |
| * Aggregate the per-CPU traffic counters into the standard netdev stats | |
| * structure. | |
| * | |
| * Return: pointer to the populated net_device_stats structure | |
| */ | |
| static struct net_device_stats *batadv_interface_stats(struct net_device *dev) | |
| { | |
| struct batadv_priv *bat_priv = netdev_priv(dev); | |
| struct net_device_stats *stats = &dev->stats; | |
| stats->tx_packets = batadv_sum_counter(bat_priv, BATADV_CNT_TX); | |
| stats->tx_bytes = batadv_sum_counter(bat_priv, BATADV_CNT_TX_BYTES); | |
| stats->tx_dropped = batadv_sum_counter(bat_priv, BATADV_CNT_TX_DROPPED); | |
| stats->rx_packets = batadv_sum_counter(bat_priv, BATADV_CNT_RX); | |
| stats->rx_bytes = batadv_sum_counter(bat_priv, BATADV_CNT_RX_BYTES); | |
| return stats; | |
| } | |
| /** | |
| * batadv_interface_set_mac_addr() - change the MAC address of a mesh | |
| * interface | |
| * @dev: the mesh interface to modify | |
| * @p: pointer to a struct sockaddr holding the new MAC address | |
| * | |
| * Replace the MAC address of the mesh interface. If the mesh is already | |
| * active, also update the local translation table entries for all configured | |
| * VLANs so that the new MAC is announced and the old one is removed. | |
| * | |
| * Return: 0 on success or negative error number in case of failure | |
| */ | |
| static int batadv_interface_set_mac_addr(struct net_device *dev, void *p) | |
| { | |
| struct batadv_priv *bat_priv = netdev_priv(dev); | |
| struct batadv_meshif_vlan *vlan; | |
| struct sockaddr *addr = p; | |
| u8 old_addr[ETH_ALEN]; | |
| if (!is_valid_ether_addr(addr->sa_data)) | |
| return -EADDRNOTAVAIL; | |
| ether_addr_copy(old_addr, dev->dev_addr); | |
| eth_hw_addr_set(dev, addr->sa_data); | |
| /* only modify transtable if it has been initialized before */ | |
| if (READ_ONCE(bat_priv->mesh_state) != BATADV_MESH_ACTIVE) | |
| return 0; | |
| rcu_read_lock(); | |
| hlist_for_each_entry_rcu(vlan, &bat_priv->meshif_vlan_list, list) { | |
| batadv_tt_local_remove(bat_priv, old_addr, vlan->vid, | |
| "mac address changed", false); | |
| batadv_tt_local_add(dev, addr->sa_data, vlan->vid, | |
| BATADV_NULL_IFINDEX, BATADV_NO_MARK); | |
| } | |
| rcu_read_unlock(); | |
| return 0; | |
| } | |
| /** | |
| * batadv_interface_change_mtu() - change the MTU of a mesh interface | |
| * @dev: the mesh interface to modify | |
| * @new_mtu: requested new MTU value | |
| * | |
| * Validate that @new_mtu fits within the range supported by the configured | |
| * hard interfaces and remember it as the user-configured MTU. | |
| * | |
| * Return: 0 on success or -EINVAL if @new_mtu is out of range | |
| */ | |
| static int batadv_interface_change_mtu(struct net_device *dev, int new_mtu) | |
| { | |
| struct batadv_priv *bat_priv = netdev_priv(dev); | |
| /* check ranges */ | |
| if (new_mtu < ETH_MIN_MTU || new_mtu > batadv_hardif_min_mtu(dev)) | |
| return -EINVAL; | |
| WRITE_ONCE(dev->mtu, new_mtu); | |
| bat_priv->mtu_set_by_user = new_mtu; | |
| return 0; | |
| } | |
| /** | |
| * batadv_interface_set_rx_mode() - set the rx mode of a device | |
| * @dev: registered network device to modify | |
| * | |
| * We do not actually need to set any rx filters for the virtual batman | |
| * mesh interface. However a dummy handler enables a user to set static | |
| * multicast listeners for instance. | |
| */ | |
| static void batadv_interface_set_rx_mode(struct net_device *dev) | |
| { | |
| } | |
| /** | |
| * batadv_interface_tx() - transmit a frame on a mesh interface | |
| * @skb: the frame to send | |
| * @mesh_iface: the mesh interface the frame was queued on | |
| * | |
| * Return: NETDEV_TX_OK on success | |
| */ | |
| static netdev_tx_t batadv_interface_tx(struct sk_buff *skb, | |
| struct net_device *mesh_iface) | |
| { | |
| static const u8 ectp_addr[ETH_ALEN] = {0xCF, 0x00, 0x00, 0x00, 0x00, 0x00}; | |
| static const u8 stp_addr[ETH_ALEN] = {0x01, 0x80, 0xC2, 0x00, 0x00, 0x00}; | |
| struct batadv_priv *bat_priv = netdev_priv(mesh_iface); | |
| enum batadv_dhcp_recipient dhcp_rcp = BATADV_DHCP_NO; | |
| enum batadv_forw_mode forw_mode = BATADV_FORW_BCAST; | |
| struct batadv_hard_iface *primary_if = NULL; | |
| struct batadv_bcast_packet *bcast_packet; | |
| int network_offset = ETH_HLEN; | |
| unsigned int header_len = 0; | |
| unsigned long brd_delay = 0; | |
| int mcast_is_routable = 0; | |
| struct vlan_ethhdr *vhdr; | |
| int data_len = skb->len; | |
| struct ethhdr *ethhdr; | |
| bool do_bcast = false; | |
| u8 *dst_hint = NULL; | |
| u8 chaddr[ETH_ALEN]; | |
| unsigned short vid; | |
| bool client_added; | |
| __be16 proto; | |
| int gw_mode; | |
| u32 seqno; | |
| int ret; | |
| if (READ_ONCE(bat_priv->mesh_state) != BATADV_MESH_ACTIVE) | |
| goto dropped; | |
| if (!pskb_may_pull(skb, ETH_HLEN)) | |
| goto dropped; | |
| /* reset control block to avoid left overs from previous users */ | |
| memset(skb->cb, 0, sizeof(struct batadv_skb_cb)); | |
| netif_trans_update(mesh_iface); | |
| vid = batadv_get_vid(skb, 0); | |
| skb_reset_mac_header(skb); | |
| ethhdr = eth_hdr(skb); | |
| proto = ethhdr->h_proto; | |
| switch (ntohs(proto)) { | |
| case ETH_P_8021Q: | |
| if (!pskb_may_pull(skb, sizeof(*vhdr))) | |
| goto dropped; | |
| vhdr = vlan_eth_hdr(skb); | |
| proto = vhdr->h_vlan_encapsulated_proto; | |
| /* drop batman-in-batman packets to prevent loops */ | |
| if (proto != htons(ETH_P_BATMAN)) { | |
| network_offset += VLAN_HLEN; | |
| break; | |
| } | |
| fallthrough; | |
| case ETH_P_BATMAN: | |
| goto dropped; | |
| } | |
| skb_set_network_header(skb, network_offset); | |
| if (batadv_bla_tx(bat_priv, skb, vid)) | |
| goto dropped; | |
| /* skb->data might have been reallocated by batadv_bla_tx() */ | |
| ethhdr = eth_hdr(skb); | |
| /* Register the client MAC in the transtable */ | |
| if (!is_multicast_ether_addr(ethhdr->h_source) && | |
| !batadv_bla_is_loopdetect_mac(ethhdr->h_source)) { | |
| client_added = batadv_tt_local_add(mesh_iface, ethhdr->h_source, | |
| vid, skb->skb_iif, | |
| skb->mark); | |
| if (!client_added) | |
| goto dropped; | |
| } | |
| /* Snoop address candidates from DHCPACKs for early DAT filling */ | |
| batadv_dat_snoop_outgoing_dhcp_ack(bat_priv, skb, proto, vid); | |
| /* don't accept stp packets. STP does not help in meshes. | |
| * better use the bridge loop avoidance ... | |
| * | |
| * The same goes for ECTP sent at least by some Cisco Switches, | |
| * it might confuse the mesh when used with bridge loop avoidance. | |
| */ | |
| if (batadv_compare_eth(ethhdr->h_dest, stp_addr)) | |
| goto dropped; | |
| if (batadv_compare_eth(ethhdr->h_dest, ectp_addr)) | |
| goto dropped; | |
| batadv_skb_set_priority(skb, 0); | |
| gw_mode = READ_ONCE(bat_priv->gw.mode); | |
| if (is_multicast_ether_addr(ethhdr->h_dest)) { | |
| /* if gw mode is off, broadcast every packet */ | |
| if (gw_mode == BATADV_GW_MODE_OFF) { | |
| do_bcast = true; | |
| goto send; | |
| } | |
| dhcp_rcp = batadv_gw_dhcp_recipient_get(skb, &header_len, | |
| chaddr); | |
| /* skb->data may have been modified by | |
| * batadv_gw_dhcp_recipient_get() | |
| */ | |
| ethhdr = eth_hdr(skb); | |
| /* if gw_mode is on, broadcast any non-DHCP message. | |
| * All the DHCP packets are going to be sent as unicast | |
| */ | |
| if (dhcp_rcp == BATADV_DHCP_NO) { | |
| do_bcast = true; | |
| goto send; | |
| } | |
| if (dhcp_rcp == BATADV_DHCP_TO_CLIENT) | |
| dst_hint = chaddr; | |
| else if ((gw_mode == BATADV_GW_MODE_SERVER) && | |
| (dhcp_rcp == BATADV_DHCP_TO_SERVER)) | |
| /* gateways should not forward any DHCP message if | |
| * directed to a DHCP server | |
| */ | |
| goto dropped; | |
| send: | |
| if (do_bcast && !is_broadcast_ether_addr(ethhdr->h_dest)) { | |
| /* WARNING batadv_mcast_forw_mode might add more headers | |
| * in front of the skb. and might even reallocate the skb | |
| */ | |
| forw_mode = batadv_mcast_forw_mode(bat_priv, skb, vid, | |
| &mcast_is_routable); | |
| switch (forw_mode) { | |
| case BATADV_FORW_BCAST: | |
| break; | |
| case BATADV_FORW_UCASTS: | |
| case BATADV_FORW_MCAST: | |
| do_bcast = false; | |
| break; | |
| case BATADV_FORW_NONE: | |
| fallthrough; | |
| default: | |
| goto dropped; | |
| } | |
| } | |
| } | |
| /* ethernet packet should be broadcasted */ | |
| if (do_bcast) { | |
| primary_if = batadv_primary_if_get_selected(bat_priv); | |
| if (!primary_if) | |
| goto dropped; | |
| /* in case of ARP request, we do not immediately broadcasti the | |
| * packet, instead we first wait for DAT to try to retrieve the | |
| * correct ARP entry | |
| */ | |
| if (batadv_dat_snoop_outgoing_arp_request(bat_priv, skb)) | |
| brd_delay = msecs_to_jiffies(ARP_REQ_DELAY); | |
| if (batadv_skb_head_push(skb, sizeof(*bcast_packet)) < 0) | |
| goto dropped; | |
| bcast_packet = (struct batadv_bcast_packet *)skb->data; | |
| bcast_packet->version = BATADV_COMPAT_VERSION; | |
| bcast_packet->ttl = BATADV_TTL - 1; | |
| /* batman packet type: broadcast */ | |
| bcast_packet->packet_type = BATADV_BCAST; | |
| bcast_packet->reserved = 0; | |
| /* hw address of first interface is the orig mac because only | |
| * this mac is known throughout the mesh | |
| */ | |
| ether_addr_copy(bcast_packet->orig, | |
| primary_if->net_dev->dev_addr); | |
| /* set broadcast sequence number */ | |
| seqno = atomic_inc_return(&bat_priv->bcast_seqno); | |
| bcast_packet->seqno = htonl(seqno); | |
| batadv_send_bcast_packet(bat_priv, skb, brd_delay, true); | |
| /* unicast packet */ | |
| } else { | |
| /* DHCP packets going to a server will use the GW feature */ | |
| if (dhcp_rcp == BATADV_DHCP_TO_SERVER) { | |
| ret = batadv_gw_out_of_range(bat_priv, skb); | |
| if (ret) | |
| goto dropped; | |
| ret = batadv_send_skb_via_gw(bat_priv, skb, vid); | |
| } else if (forw_mode == BATADV_FORW_UCASTS) { | |
| ret = batadv_mcast_forw_send(bat_priv, skb, vid, | |
| mcast_is_routable); | |
| } else if (forw_mode == BATADV_FORW_MCAST) { | |
| ret = batadv_mcast_forw_mcsend(bat_priv, skb); | |
| } else { | |
| if (batadv_dat_snoop_outgoing_arp_request(bat_priv, | |
| skb)) | |
| goto dropped; | |
| batadv_dat_snoop_outgoing_arp_reply(bat_priv, skb); | |
| ret = batadv_send_skb_via_tt(bat_priv, skb, dst_hint, | |
| vid); | |
| } | |
| if (ret != NET_XMIT_SUCCESS) | |
| goto dropped_freed; | |
| } | |
| batadv_inc_counter(bat_priv, BATADV_CNT_TX); | |
| batadv_add_counter(bat_priv, BATADV_CNT_TX_BYTES, data_len); | |
| goto end; | |
| dropped: | |
| kfree_skb(skb); | |
| dropped_freed: | |
| batadv_inc_counter(bat_priv, BATADV_CNT_TX_DROPPED); | |
| end: | |
| batadv_hardif_put(primary_if); | |
| return NETDEV_TX_OK; | |
| } | |
| /** | |
| * batadv_interface_rx() - receive ethernet frame on local batman-adv interface | |
| * @mesh_iface: local interface which will receive the ethernet frame | |
| * @skb: ethernet frame for @mesh_iface | |
| * @hdr_size: size of already parsed batman-adv header | |
| * @orig_node: originator from which the batman-adv packet was sent | |
| * | |
| * Sends an ethernet frame to the receive path of the local @mesh_iface. | |
| * skb->data must still point to the batman-adv header with the size @hdr_size. | |
| * The caller has to have parsed this header already and made sure that at least | |
| * @hdr_size bytes are still available for pull in @skb. | |
| * | |
| * The packet may still get dropped. This can happen when the encapsulated | |
| * ethernet frame is invalid or contains again a batman-adv packet. Also | |
| * unicast packets will be dropped directly when they were sent between two | |
| * isolated clients. | |
| */ | |
| void batadv_interface_rx(struct net_device *mesh_iface, | |
| struct sk_buff *skb, int hdr_size, | |
| struct batadv_orig_node *orig_node) | |
| { | |
| struct batadv_priv *bat_priv = netdev_priv(mesh_iface); | |
| struct batadv_bcast_packet *batadv_bcast_packet; | |
| struct vlan_ethhdr *vhdr; | |
| struct ethhdr *ethhdr; | |
| unsigned short vid; | |
| int packet_type; | |
| batadv_bcast_packet = (struct batadv_bcast_packet *)skb->data; | |
| packet_type = batadv_bcast_packet->packet_type; | |
| skb_pull_rcsum(skb, hdr_size); | |
| skb_reset_mac_header(skb); | |
| /* clean the netfilter state now that the batman-adv header has been | |
| * removed | |
| */ | |
| nf_reset_ct(skb); | |
| if (unlikely(!pskb_may_pull(skb, ETH_HLEN))) | |
| goto dropped; | |
| vid = batadv_get_vid(skb, 0); | |
| ethhdr = eth_hdr(skb); | |
| switch (ntohs(ethhdr->h_proto)) { | |
| case ETH_P_8021Q: | |
| if (!pskb_may_pull(skb, VLAN_ETH_HLEN)) | |
| goto dropped; | |
| ethhdr = eth_hdr(skb); | |
| vhdr = skb_vlan_eth_hdr(skb); | |
| /* drop batman-in-batman packets to prevent loops */ | |
| if (vhdr->h_vlan_encapsulated_proto != htons(ETH_P_BATMAN)) | |
| break; | |
| fallthrough; | |
| case ETH_P_BATMAN: | |
| goto dropped; | |
| } | |
| /* skb->dev & skb->pkt_type are set here */ | |
| skb->protocol = eth_type_trans(skb, mesh_iface); | |
| skb_postpull_rcsum(skb, eth_hdr(skb), ETH_HLEN); | |
| batadv_inc_counter(bat_priv, BATADV_CNT_RX); | |
| batadv_add_counter(bat_priv, BATADV_CNT_RX_BYTES, | |
| skb->len + ETH_HLEN); | |
| /* Let the bridge loop avoidance check the packet. If will | |
| * not handle it, we can safely push it up. | |
| */ | |
| if (batadv_bla_rx(bat_priv, skb, vid, packet_type)) | |
| goto out; | |
| if (orig_node) | |
| batadv_tt_add_temporary_global_entry(bat_priv, orig_node, | |
| ethhdr->h_source, vid); | |
| if (is_multicast_ether_addr(ethhdr->h_dest)) { | |
| /* set the mark on broadcast packets if AP isolation is ON and | |
| * the packet is coming from an "isolated" client | |
| */ | |
| if (batadv_vlan_ap_isola_get(bat_priv, vid) && | |
| batadv_tt_global_is_isolated(bat_priv, ethhdr->h_source, | |
| vid)) { | |
| /* save bits in skb->mark not covered by the mask and | |
| * apply the mark on the rest | |
| */ | |
| skb->mark &= ~bat_priv->isolation_mark_mask; | |
| skb->mark |= bat_priv->isolation_mark; | |
| } | |
| } else if (batadv_is_ap_isolated(bat_priv, ethhdr->h_source, | |
| ethhdr->h_dest, vid)) { | |
| goto dropped; | |
| } | |
| netif_rx(skb); | |
| goto out; | |
| dropped: | |
| kfree_skb(skb); | |
| out: | |
| return; | |
| } | |
| /** | |
| * batadv_meshif_vlan_release() - release vlan from lists and queue for free | |
| * after rcu grace period | |
| * @ref: kref pointer of the vlan object | |
| */ | |
| void batadv_meshif_vlan_release(struct kref *ref) | |
| { | |
| struct batadv_meshif_vlan *vlan; | |
| vlan = container_of(ref, struct batadv_meshif_vlan, refcount); | |
| spin_lock_bh(&vlan->bat_priv->meshif_vlan_list_lock); | |
| hlist_del_rcu(&vlan->list); | |
| spin_unlock_bh(&vlan->bat_priv->meshif_vlan_list_lock); | |
| kfree_rcu(vlan, rcu); | |
| } | |
| /** | |
| * batadv_meshif_vlan_get() - get the vlan object for a specific vid | |
| * @bat_priv: the bat priv with all the mesh interface information | |
| * @vid: the identifier of the vlan object to retrieve | |
| * | |
| * Return: the private data of the vlan matching the vid passed as argument or | |
| * NULL otherwise. The refcounter of the returned object is incremented by 1. | |
| */ | |
| struct batadv_meshif_vlan *batadv_meshif_vlan_get(struct batadv_priv *bat_priv, | |
| unsigned short vid) | |
| { | |
| struct batadv_meshif_vlan *vlan = NULL; | |
| struct batadv_meshif_vlan *vlan_tmp; | |
| rcu_read_lock(); | |
| hlist_for_each_entry_rcu(vlan_tmp, &bat_priv->meshif_vlan_list, list) { | |
| if (vlan_tmp->vid != vid) | |
| continue; | |
| if (!kref_get_unless_zero(&vlan_tmp->refcount)) | |
| continue; | |
| vlan = vlan_tmp; | |
| break; | |
| } | |
| rcu_read_unlock(); | |
| return vlan; | |
| } | |
| /** | |
| * batadv_meshif_create_vlan() - allocate the needed resources for a new vlan | |
| * @bat_priv: the bat priv with all the mesh interface information | |
| * @vid: the VLAN identifier | |
| * | |
| * Return: 0 on success, a negative error otherwise. | |
| */ | |
| int batadv_meshif_create_vlan(struct batadv_priv *bat_priv, unsigned short vid) | |
| { | |
| struct batadv_meshif_vlan *vlan; | |
| spin_lock_bh(&bat_priv->meshif_vlan_list_lock); | |
| vlan = batadv_meshif_vlan_get(bat_priv, vid); | |
| if (vlan) { | |
| batadv_meshif_vlan_put(vlan); | |
| spin_unlock_bh(&bat_priv->meshif_vlan_list_lock); | |
| return -EEXIST; | |
| } | |
| vlan = kzalloc_obj(*vlan, GFP_ATOMIC); | |
| if (!vlan) { | |
| spin_unlock_bh(&bat_priv->meshif_vlan_list_lock); | |
| return -ENOMEM; | |
| } | |
| vlan->bat_priv = bat_priv; | |
| vlan->vid = vid; | |
| kref_init(&vlan->refcount); | |
| WRITE_ONCE(vlan->ap_isolation, 0); | |
| kref_get(&vlan->refcount); | |
| hlist_add_head_rcu(&vlan->list, &bat_priv->meshif_vlan_list); | |
| spin_unlock_bh(&bat_priv->meshif_vlan_list_lock); | |
| /* add a new TT local entry. This one will be marked with the NOPURGE | |
| * flag | |
| */ | |
| batadv_tt_local_add(bat_priv->mesh_iface, | |
| bat_priv->mesh_iface->dev_addr, vid, | |
| BATADV_NULL_IFINDEX, BATADV_NO_MARK); | |
| /* don't return reference to new meshif_vlan */ | |
| batadv_meshif_vlan_put(vlan); | |
| return 0; | |
| } | |
| /** | |
| * batadv_meshif_destroy_vlan() - remove and destroy a meshif_vlan object | |
| * @bat_priv: the bat priv with all the mesh interface information | |
| * @vlan: the object to remove | |
| */ | |
| void batadv_meshif_destroy_vlan(struct batadv_priv *bat_priv, | |
| struct batadv_meshif_vlan *vlan) | |
| { | |
| /* explicitly remove the associated TT local entry because it is marked | |
| * with the NOPURGE flag | |
| */ | |
| batadv_tt_local_remove(bat_priv, bat_priv->mesh_iface->dev_addr, | |
| vlan->vid, "vlan interface destroyed", false); | |
| batadv_meshif_vlan_put(vlan); | |
| } | |
| /** | |
| * batadv_interface_add_vid() - ndo_add_vid API implementation | |
| * @dev: the netdev of the mesh interface | |
| * @proto: protocol of the vlan id | |
| * @vid: identifier of the new vlan | |
| * | |
| * Set up all the internal structures for handling the new vlan on top of the | |
| * mesh interface | |
| * | |
| * Return: 0 on success or a negative error code in case of failure. | |
| */ | |
| static int batadv_interface_add_vid(struct net_device *dev, __be16 proto, | |
| unsigned short vid) | |
| { | |
| struct batadv_priv *bat_priv = netdev_priv(dev); | |
| struct batadv_meshif_vlan *vlan; | |
| /* only 802.1Q vlans are supported. | |
| * batman-adv does not know how to handle other types | |
| */ | |
| if (proto != htons(ETH_P_8021Q)) | |
| return -EINVAL; | |
| /* VID 0 is only used to indicate "priority tag" frames which only | |
| * contain priority information and no VID. No management structures | |
| * should be created for this VID and it should be handled like an | |
| * untagged frame. | |
| */ | |
| if (vid == 0) | |
| return 0; | |
| vid |= BATADV_VLAN_HAS_TAG; | |
| /* if a new vlan is getting created and it already exists, it means that | |
| * it was not deleted yet. batadv_meshif_vlan_get() increases the | |
| * refcount in order to revive the object. | |
| * | |
| * if it does not exist then create it. | |
| */ | |
| vlan = batadv_meshif_vlan_get(bat_priv, vid); | |
| if (!vlan) | |
| return batadv_meshif_create_vlan(bat_priv, vid); | |
| /* add a new TT local entry. This one will be marked with the NOPURGE | |
| * flag. This must be added again, even if the vlan object already | |
| * exists, because the entry was deleted by kill_vid() | |
| */ | |
| batadv_tt_local_add(bat_priv->mesh_iface, | |
| bat_priv->mesh_iface->dev_addr, vid, | |
| BATADV_NULL_IFINDEX, BATADV_NO_MARK); | |
| return 0; | |
| } | |
| /** | |
| * batadv_interface_kill_vid() - ndo_kill_vid API implementation | |
| * @dev: the netdev of the mesh interface | |
| * @proto: protocol of the vlan id | |
| * @vid: identifier of the deleted vlan | |
| * | |
| * Destroy all the internal structures used to handle the vlan identified by vid | |
| * on top of the mesh interface | |
| * | |
| * Return: 0 on success, -EINVAL if the specified prototype is not ETH_P_8021Q | |
| * or -ENOENT if the specified vlan id wasn't registered. | |
| */ | |
| static int batadv_interface_kill_vid(struct net_device *dev, __be16 proto, | |
| unsigned short vid) | |
| { | |
| struct batadv_priv *bat_priv = netdev_priv(dev); | |
| struct batadv_meshif_vlan *vlan; | |
| /* only 802.1Q vlans are supported. batman-adv does not know how to | |
| * handle other types | |
| */ | |
| if (proto != htons(ETH_P_8021Q)) | |
| return -EINVAL; | |
| /* "priority tag" frames are handled like "untagged" frames | |
| * and no meshif_vlan needs to be destroyed | |
| */ | |
| if (vid == 0) | |
| return 0; | |
| vlan = batadv_meshif_vlan_get(bat_priv, vid | BATADV_VLAN_HAS_TAG); | |
| if (!vlan) | |
| return -ENOENT; | |
| batadv_meshif_destroy_vlan(bat_priv, vlan); | |
| /* finally free the vlan object */ | |
| batadv_meshif_vlan_put(vlan); | |
| return 0; | |
| } | |
| /* batman-adv network devices have devices nesting below it and are a special | |
| * "super class" of normal network devices; split their locks off into a | |
| * separate class since they always nest. | |
| */ | |
| static struct lock_class_key batadv_netdev_xmit_lock_key; | |
| static struct lock_class_key batadv_netdev_addr_lock_key; | |
| /** | |
| * batadv_set_lockdep_class_one() - Set lockdep class for a single tx queue | |
| * @dev: device which owns the tx queue | |
| * @txq: tx queue to modify | |
| * @_unused: always NULL | |
| */ | |
| static void batadv_set_lockdep_class_one(struct net_device *dev, | |
| struct netdev_queue *txq, | |
| void *_unused) | |
| { | |
| lockdep_set_class(&txq->_xmit_lock, &batadv_netdev_xmit_lock_key); | |
| } | |
| /** | |
| * batadv_set_lockdep_class() - Set txq and addr_list lockdep class | |
| * @dev: network device to modify | |
| */ | |
| static void batadv_set_lockdep_class(struct net_device *dev) | |
| { | |
| lockdep_set_class(&dev->addr_list_lock, &batadv_netdev_addr_lock_key); | |
| netdev_for_each_tx_queue(dev, batadv_set_lockdep_class_one, NULL); | |
| } | |
| /** | |
| * batadv_meshif_init_late() - late stage initialization of mesh interface | |
| * @dev: registered network device to modify | |
| * | |
| * Return: error code on failures | |
| */ | |
| static int batadv_meshif_init_late(struct net_device *dev) | |
| { | |
| size_t cnt_len = sizeof(u64) * BATADV_CNT_NUM; | |
| struct batadv_priv *bat_priv; | |
| u32 random_seqno; | |
| int ret; | |
| batadv_set_lockdep_class(dev); | |
| bat_priv = netdev_priv(dev); | |
| bat_priv->mesh_iface = dev; | |
| /* batadv_interface_stats() needs to be available as soon as | |
| * register_netdevice() has been called | |
| */ | |
| bat_priv->bat_counters = __alloc_percpu(cnt_len, __alignof__(u64)); | |
| if (!bat_priv->bat_counters) | |
| return -ENOMEM; | |
| WRITE_ONCE(bat_priv->aggregated_ogms, 1); | |
| WRITE_ONCE(bat_priv->bonding, 0); | |
| #ifdef CONFIG_BATMAN_ADV_BLA | |
| WRITE_ONCE(bat_priv->bridge_loop_avoidance, 1); | |
| #endif | |
| #ifdef CONFIG_BATMAN_ADV_DAT | |
| WRITE_ONCE(bat_priv->distributed_arp_table, 1); | |
| #endif | |
| #ifdef CONFIG_BATMAN_ADV_MCAST | |
| WRITE_ONCE(bat_priv->multicast_mode, 1); | |
| WRITE_ONCE(bat_priv->multicast_fanout, 16); | |
| atomic_set(&bat_priv->mcast.num_want_all_unsnoopables, 0); | |
| atomic_set(&bat_priv->mcast.num_want_all_ipv4, 0); | |
| atomic_set(&bat_priv->mcast.num_want_all_ipv6, 0); | |
| atomic_set(&bat_priv->mcast.num_no_mc_ptype_capa, 0); | |
| #endif | |
| WRITE_ONCE(bat_priv->gw.mode, BATADV_GW_MODE_OFF); | |
| WRITE_ONCE(bat_priv->gw.bandwidth_down, 100); | |
| WRITE_ONCE(bat_priv->gw.bandwidth_up, 20); | |
| WRITE_ONCE(bat_priv->orig_interval, 1000); | |
| WRITE_ONCE(bat_priv->hop_penalty, 30); | |
| #ifdef CONFIG_BATMAN_ADV_DEBUG | |
| WRITE_ONCE(bat_priv->log_level, 0); | |
| #endif | |
| WRITE_ONCE(bat_priv->fragmentation, 1); | |
| WRITE_ONCE(bat_priv->packet_size_max, BATADV_MAX_MTU); | |
| atomic_set(&bat_priv->bcast_queue_left, BATADV_BCAST_QUEUE_LEN); | |
| atomic_set(&bat_priv->batman_queue_left, BATADV_BATMAN_QUEUE_LEN); | |
| WRITE_ONCE(bat_priv->mesh_state, BATADV_MESH_INACTIVE); | |
| atomic_set(&bat_priv->bcast_seqno, 1); | |
| atomic_set(&bat_priv->tt.vn, 0); | |
| atomic_set(&bat_priv->tt.ogm_append_cnt, 0); | |
| #ifdef CONFIG_BATMAN_ADV_BLA | |
| atomic_set(&bat_priv->bla.num_requests, 0); | |
| spin_lock_init(&bat_priv->bla.num_requests_lock); | |
| #endif | |
| atomic_set(&bat_priv->tp_num, 0); | |
| WRITE_ONCE(bat_priv->tt.local_changes, 0); | |
| bat_priv->tt.last_changeset = NULL; | |
| bat_priv->tt.last_changeset_len = 0; | |
| bat_priv->isolation_mark = 0; | |
| bat_priv->isolation_mark_mask = 0; | |
| /* randomize initial seqno to avoid collision */ | |
| get_random_bytes(&random_seqno, sizeof(random_seqno)); | |
| atomic_set(&bat_priv->frag_seqno, random_seqno); | |
| bat_priv->primary_if = NULL; | |
| if (!bat_priv->algo_ops) { | |
| ret = batadv_algo_select(bat_priv, batadv_routing_algo); | |
| if (ret < 0) | |
| goto free_bat_counters; | |
| } | |
| ret = batadv_mesh_init(dev); | |
| if (ret < 0) | |
| goto free_bat_counters; | |
| return 0; | |
| free_bat_counters: | |
| free_percpu(bat_priv->bat_counters); | |
| bat_priv->bat_counters = NULL; | |
| return ret; | |
| } | |
| /** | |
| * batadv_meshif_slave_add() - Add a slave interface to a batadv_mesh_interface | |
| * @dev: batadv_mesh_interface used as master interface | |
| * @slave_dev: net_device which should become the slave interface | |
| * @extack: extended ACK report struct | |
| * | |
| * Return: 0 if successful or error otherwise. | |
| */ | |
| static int batadv_meshif_slave_add(struct net_device *dev, | |
| struct net_device *slave_dev, | |
| struct netlink_ext_ack *extack) | |
| { | |
| return batadv_hardif_enable_interface(slave_dev, dev); | |
| } | |
| /** | |
| * batadv_meshif_slave_del() - Delete a slave iface from a batadv_mesh_interface | |
| * @dev: batadv_mesh_interface used as master interface | |
| * @slave_dev: net_device which should be removed from the master interface | |
| * | |
| * Return: 0 if successful or error otherwise. | |
| */ | |
| static int batadv_meshif_slave_del(struct net_device *dev, | |
| struct net_device *slave_dev) | |
| { | |
| struct batadv_hard_iface *hard_iface; | |
| int ret = -EINVAL; | |
| hard_iface = batadv_hardif_get_by_netdev(slave_dev); | |
| if (!hard_iface || hard_iface->mesh_iface != dev) | |
| goto out; | |
| batadv_hardif_disable_interface(hard_iface); | |
| ret = 0; | |
| out: | |
| batadv_hardif_put(hard_iface); | |
| return ret; | |
| } | |
| static const struct net_device_ops batadv_netdev_ops = { | |
| .ndo_init = batadv_meshif_init_late, | |
| .ndo_get_stats = batadv_interface_stats, | |
| .ndo_vlan_rx_add_vid = batadv_interface_add_vid, | |
| .ndo_vlan_rx_kill_vid = batadv_interface_kill_vid, | |
| .ndo_set_mac_address = batadv_interface_set_mac_addr, | |
| .ndo_change_mtu = batadv_interface_change_mtu, | |
| .ndo_set_rx_mode = batadv_interface_set_rx_mode, | |
| .ndo_start_xmit = batadv_interface_tx, | |
| .ndo_validate_addr = eth_validate_addr, | |
| .ndo_add_slave = batadv_meshif_slave_add, | |
| .ndo_del_slave = batadv_meshif_slave_del, | |
| }; | |
| /** | |
| * batadv_get_drvinfo() - ethtool driver info handler for mesh interfaces | |
| * @dev: the mesh interface (unused) | |
| * @info: ethtool_drvinfo struct to populate | |
| */ | |
| static void batadv_get_drvinfo(struct net_device *dev, | |
| struct ethtool_drvinfo *info) | |
| { | |
| strscpy(info->driver, "B.A.T.M.A.N. advanced", sizeof(info->driver)); | |
| strscpy(info->version, init_utsname()->release, sizeof(info->version)); | |
| strscpy(info->fw_version, "N/A", sizeof(info->fw_version)); | |
| strscpy(info->bus_info, "batman", sizeof(info->bus_info)); | |
| } | |
| /* Inspired by drivers/net/ethernet/dlink/sundance.c:1702 | |
| * Declare each description string in struct.name[] to get fixed sized buffer | |
| * and compile time checking for strings longer than ETH_GSTRING_LEN. | |
| */ | |
| static const struct { | |
| const char name[ETH_GSTRING_LEN]; | |
| } batadv_counters_strings[] = { | |
| { "tx" }, | |
| { "tx_bytes" }, | |
| { "tx_dropped" }, | |
| { "rx" }, | |
| { "rx_bytes" }, | |
| { "forward" }, | |
| { "forward_bytes" }, | |
| { "mgmt_tx" }, | |
| { "mgmt_tx_bytes" }, | |
| { "mgmt_rx" }, | |
| { "mgmt_rx_bytes" }, | |
| { "frag_tx" }, | |
| { "frag_tx_bytes" }, | |
| { "frag_rx" }, | |
| { "frag_rx_bytes" }, | |
| { "frag_fwd" }, | |
| { "frag_fwd_bytes" }, | |
| { "tt_request_tx" }, | |
| { "tt_request_rx" }, | |
| { "tt_response_tx" }, | |
| { "tt_response_rx" }, | |
| { "tt_roam_adv_tx" }, | |
| { "tt_roam_adv_rx" }, | |
| #ifdef CONFIG_BATMAN_ADV_MCAST | |
| { "mcast_tx" }, | |
| { "mcast_tx_bytes" }, | |
| { "mcast_tx_local" }, | |
| { "mcast_tx_local_bytes" }, | |
| { "mcast_rx" }, | |
| { "mcast_rx_bytes" }, | |
| { "mcast_rx_local" }, | |
| { "mcast_rx_local_bytes" }, | |
| { "mcast_fwd" }, | |
| { "mcast_fwd_bytes" }, | |
| #endif | |
| #ifdef CONFIG_BATMAN_ADV_DAT | |
| { "dat_get_tx" }, | |
| { "dat_get_rx" }, | |
| { "dat_put_tx" }, | |
| { "dat_put_rx" }, | |
| { "dat_cached_reply_tx" }, | |
| #endif | |
| }; | |
| /** | |
| * batadv_get_strings() - ethtool string handler for mesh interfaces | |
| * @dev: the mesh interface (unused) | |
| * @stringset: ethtool string set to retrieve | |
| * @data: buffer to copy the requested string set into | |
| */ | |
| static void batadv_get_strings(struct net_device *dev, u32 stringset, u8 *data) | |
| { | |
| if (stringset == ETH_SS_STATS) | |
| memcpy(data, batadv_counters_strings, | |
| sizeof(batadv_counters_strings)); | |
| } | |
| /** | |
| * batadv_get_ethtool_stats() - ethtool stats handler for mesh interfaces | |
| * @dev: the mesh interface to query | |
| * @stats: ethtool_stats struct (unused) | |
| * @data: destination array for the gathered counter values | |
| */ | |
| static void batadv_get_ethtool_stats(struct net_device *dev, | |
| struct ethtool_stats *stats, u64 *data) | |
| { | |
| struct batadv_priv *bat_priv = netdev_priv(dev); | |
| int i; | |
| for (i = 0; i < BATADV_CNT_NUM; i++) | |
| data[i] = batadv_sum_counter(bat_priv, i); | |
| } | |
| /** | |
| * batadv_get_sset_count() - ethtool stringset size handler for mesh interfaces | |
| * @dev: the mesh interface (unused) | |
| * @stringset: ethtool string set to query | |
| * | |
| * Return: number of entries in @stringset or -EOPNOTSUPP if @stringset is not | |
| * supported | |
| */ | |
| static int batadv_get_sset_count(struct net_device *dev, int stringset) | |
| { | |
| if (stringset == ETH_SS_STATS) | |
| return BATADV_CNT_NUM; | |
| return -EOPNOTSUPP; | |
| } | |
| static const struct ethtool_ops batadv_ethtool_ops = { | |
| .get_drvinfo = batadv_get_drvinfo, | |
| .get_link = ethtool_op_get_link, | |
| .get_strings = batadv_get_strings, | |
| .get_ethtool_stats = batadv_get_ethtool_stats, | |
| .get_sset_count = batadv_get_sset_count, | |
| }; | |
| /** | |
| * batadv_meshif_free() - Deconstructor of batadv_mesh_interface | |
| * @dev: Device to cleanup and remove | |
| */ | |
| static void batadv_meshif_free(struct net_device *dev) | |
| { | |
| batadv_mesh_free(dev); | |
| /* some scheduled RCU callbacks need the bat_priv struct to accomplish | |
| * their tasks. Wait for them all to be finished before freeing the | |
| * netdev and its private data (bat_priv) | |
| */ | |
| rcu_barrier(); | |
| } | |
| /** | |
| * batadv_meshif_init_early() - early stage initialization of mesh interface | |
| * @dev: registered network device to modify | |
| */ | |
| static void batadv_meshif_init_early(struct net_device *dev) | |
| { | |
| ether_setup(dev); | |
| dev->netdev_ops = &batadv_netdev_ops; | |
| dev->needs_free_netdev = true; | |
| dev->priv_destructor = batadv_meshif_free; | |
| dev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; | |
| dev->priv_flags |= IFF_NO_QUEUE; | |
| dev->lltx = true; | |
| dev->netns_immutable = true; | |
| /* can't call min_mtu, because the needed variables | |
| * have not been initialized yet | |
| */ | |
| dev->mtu = ETH_DATA_LEN; | |
| dev->max_mtu = BATADV_MAX_MTU; | |
| /* generate random address */ | |
| eth_hw_addr_random(dev); | |
| dev->ethtool_ops = &batadv_ethtool_ops; | |
| } | |
| /** | |
| * batadv_meshif_validate() - validate configuration of new batadv link | |
| * @tb: IFLA_INFO_DATA netlink attributes | |
| * @data: enum batadv_ifla_attrs attributes | |
| * @extack: extended ACK report struct | |
| * | |
| * Return: 0 if successful or error otherwise. | |
| */ | |
| static int batadv_meshif_validate(struct nlattr *tb[], struct nlattr *data[], | |
| struct netlink_ext_ack *extack) | |
| { | |
| struct batadv_algo_ops *algo_ops; | |
| if (!data) | |
| return 0; | |
| if (data[IFLA_BATADV_ALGO_NAME]) { | |
| algo_ops = batadv_algo_get(nla_data(data[IFLA_BATADV_ALGO_NAME])); | |
| if (!algo_ops) | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * batadv_meshif_newlink() - pre-initialize and register new batadv link | |
| * @dev: network device to register | |
| * @params: rtnl newlink parameters | |
| * @extack: extended ACK report struct | |
| * | |
| * Return: 0 if successful or error otherwise. | |
| */ | |
| static int batadv_meshif_newlink(struct net_device *dev, | |
| struct rtnl_newlink_params *params, | |
| struct netlink_ext_ack *extack) | |
| { | |
| struct batadv_priv *bat_priv = netdev_priv(dev); | |
| struct nlattr **data = params->data; | |
| const char *algo_name; | |
| int err; | |
| if (data && data[IFLA_BATADV_ALGO_NAME]) { | |
| algo_name = nla_data(data[IFLA_BATADV_ALGO_NAME]); | |
| err = batadv_algo_select(bat_priv, algo_name); | |
| if (err) | |
| return -EINVAL; | |
| } | |
| return register_netdevice(dev); | |
| } | |
| /** | |
| * batadv_meshif_destroy_netlink() - deletion of batadv_mesh_interface via | |
| * netlink | |
| * @mesh_iface: the to-be-removed batman-adv interface | |
| * @head: list pointer | |
| */ | |
| static void batadv_meshif_destroy_netlink(struct net_device *mesh_iface, | |
| struct list_head *head) | |
| { | |
| struct batadv_hard_iface *hard_iface; | |
| while (!list_empty(&mesh_iface->adj_list.lower)) { | |
| hard_iface = netdev_adjacent_get_private(mesh_iface->adj_list.lower.next); | |
| batadv_hardif_disable_interface(hard_iface); | |
| } | |
| unregister_netdevice_queue(mesh_iface, head); | |
| } | |
| /** | |
| * batadv_meshif_is_valid() - Check whether device is a batadv mesh interface | |
| * @net_dev: device which should be checked | |
| * | |
| * Return: true when net_dev is a batman-adv interface, false otherwise | |
| */ | |
| bool batadv_meshif_is_valid(const struct net_device *net_dev) | |
| { | |
| if (net_dev->netdev_ops->ndo_start_xmit == batadv_interface_tx) | |
| return true; | |
| return false; | |
| } | |
| static const struct nla_policy batadv_ifla_policy[IFLA_BATADV_MAX + 1] = { | |
| [IFLA_BATADV_ALGO_NAME] = { .type = NLA_NUL_STRING }, | |
| }; | |
| struct rtnl_link_ops batadv_link_ops __read_mostly = { | |
| .kind = "batadv", | |
| .priv_size = sizeof(struct batadv_priv), | |
| .setup = batadv_meshif_init_early, | |
| .maxtype = IFLA_BATADV_MAX, | |
| .policy = batadv_ifla_policy, | |
| .validate = batadv_meshif_validate, | |
| .newlink = batadv_meshif_newlink, | |
| .dellink = batadv_meshif_destroy_netlink, | |
| }; |