| // SPDX-License-Identifier: GPL-2.0 | |
| /* Copyright (C) B.A.T.M.A.N. contributors: | |
| * | |
| * Linus Lüssing, Marek Lindner | |
| */ | |
| #include "bat_v.h" | |
| #include "main.h" | |
| #include <linux/cache.h> | |
| #include <linux/compiler.h> | |
| #include <linux/errno.h> | |
| #include <linux/if_ether.h> | |
| #include <linux/init.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/kref.h> | |
| #include <linux/limits.h> | |
| #include <linux/list.h> | |
| #include <linux/minmax.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/netlink.h> | |
| #include <linux/rculist.h> | |
| #include <linux/rcupdate.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/stddef.h> | |
| #include <linux/types.h> | |
| #include <linux/workqueue.h> | |
| #include <net/genetlink.h> | |
| #include <net/netlink.h> | |
| #include <uapi/linux/batadv_packet.h> | |
| #include <uapi/linux/batman_adv.h> | |
| #include "bat_algo.h" | |
| #include "bat_v_elp.h" | |
| #include "bat_v_ogm.h" | |
| #include "gateway_client.h" | |
| #include "hard-interface.h" | |
| #include "hash.h" | |
| #include "log.h" | |
| #include "netlink.h" | |
| #include "originator.h" | |
| /** | |
| * batadv_v_iface_activate() - finalise the activation of a hard interface | |
| * @hard_iface: interface to activate | |
| * | |
| * Reuse the currently selected primary interface to seed the ELP packet. | |
| * Immediately activate the interface. | |
| */ | |
| static void batadv_v_iface_activate(struct batadv_hard_iface *hard_iface) | |
| { | |
| struct batadv_priv *bat_priv = netdev_priv(hard_iface->mesh_iface); | |
| struct batadv_hard_iface *primary_if; | |
| primary_if = batadv_primary_if_get_selected(bat_priv); | |
| if (primary_if) { | |
| batadv_v_elp_iface_activate(primary_if, hard_iface); | |
| batadv_hardif_put(primary_if); | |
| } | |
| /* B.A.T.M.A.N. V does not use any queuing mechanism, therefore it can | |
| * set the interface as ACTIVE right away, without any risk of race | |
| * condition | |
| */ | |
| if (hard_iface->if_status == BATADV_IF_TO_BE_ACTIVATED) | |
| hard_iface->if_status = BATADV_IF_ACTIVE; | |
| } | |
| /** | |
| * batadv_v_iface_enable() - enable the B.A.T.M.A.N. V protocol on an | |
| * interface | |
| * @hard_iface: interface to enable | |
| * | |
| * Enable the ELP and OGM components for @hard_iface. On error, the partially | |
| * enabled state is rolled back before returning. | |
| * | |
| * Return: 0 on success or negative error number in case of failure | |
| */ | |
| static int batadv_v_iface_enable(struct batadv_hard_iface *hard_iface) | |
| { | |
| int ret; | |
| ret = batadv_v_elp_iface_enable(hard_iface); | |
| if (ret < 0) | |
| return ret; | |
| ret = batadv_v_ogm_iface_enable(hard_iface); | |
| if (ret < 0) | |
| batadv_v_elp_iface_disable(hard_iface); | |
| return ret; | |
| } | |
| /** | |
| * batadv_v_iface_disable() - disable the B.A.T.M.A.N. V protocol on an | |
| * interface | |
| * @hard_iface: interface to disable | |
| */ | |
| static void batadv_v_iface_disable(struct batadv_hard_iface *hard_iface) | |
| { | |
| batadv_v_ogm_iface_disable(hard_iface); | |
| batadv_v_elp_iface_disable(hard_iface); | |
| } | |
| /** | |
| * batadv_v_primary_iface_set() - apply primary interface state | |
| * @hard_iface: interface which just became the primary | |
| */ | |
| static void batadv_v_primary_iface_set(struct batadv_hard_iface *hard_iface) | |
| { | |
| batadv_v_elp_primary_iface_set(hard_iface); | |
| batadv_v_ogm_primary_iface_set(hard_iface); | |
| } | |
| /** | |
| * batadv_v_iface_update_mac() - react to hard-interface MAC address change | |
| * @hard_iface: the modified interface | |
| * | |
| * If the modified interface is the primary one, update the originator | |
| * address in the ELP and OGM messages to reflect the new MAC address. | |
| */ | |
| static void batadv_v_iface_update_mac(struct batadv_hard_iface *hard_iface) | |
| { | |
| struct batadv_priv *bat_priv = netdev_priv(hard_iface->mesh_iface); | |
| struct batadv_hard_iface *primary_if; | |
| primary_if = batadv_primary_if_get_selected(bat_priv); | |
| if (primary_if != hard_iface) | |
| goto out; | |
| batadv_v_primary_iface_set(hard_iface); | |
| out: | |
| batadv_hardif_put(primary_if); | |
| } | |
| /** | |
| * batadv_v_hardif_neigh_init() - initialise the B.A.T.M.A.N. V state of a | |
| * hard interface neighbour | |
| * @hardif_neigh: hard interface neighbour to initialise | |
| */ | |
| static void | |
| batadv_v_hardif_neigh_init(struct batadv_hardif_neigh_node *hardif_neigh) | |
| { | |
| ewma_throughput_init(&hardif_neigh->bat_v.throughput); | |
| } | |
| /** | |
| * batadv_v_neigh_dump_neigh() - Dump a neighbour into a message | |
| * @msg: Netlink message to dump into | |
| * @portid: Port making netlink request | |
| * @seq: Sequence number of netlink message | |
| * @hardif_neigh: Neighbour to dump | |
| * | |
| * Return: Error code, or 0 on success | |
| */ | |
| static int | |
| batadv_v_neigh_dump_neigh(struct sk_buff *msg, u32 portid, u32 seq, | |
| struct batadv_hardif_neigh_node *hardif_neigh) | |
| { | |
| unsigned int last_seen_msecs; | |
| u32 throughput; | |
| void *hdr; | |
| last_seen_msecs = jiffies_to_msecs(jiffies - hardif_neigh->last_seen); | |
| throughput = ewma_throughput_read(&hardif_neigh->bat_v.throughput); | |
| throughput = throughput * 100; | |
| hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, NLM_F_MULTI, | |
| BATADV_CMD_GET_NEIGHBORS); | |
| if (!hdr) | |
| return -ENOBUFS; | |
| if (nla_put(msg, BATADV_ATTR_NEIGH_ADDRESS, ETH_ALEN, | |
| hardif_neigh->addr) || | |
| nla_put_string(msg, BATADV_ATTR_HARD_IFNAME, | |
| hardif_neigh->if_incoming->net_dev->name) || | |
| nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX, | |
| hardif_neigh->if_incoming->net_dev->ifindex) || | |
| nla_put_u32(msg, BATADV_ATTR_LAST_SEEN_MSECS, | |
| last_seen_msecs) || | |
| nla_put_u32(msg, BATADV_ATTR_THROUGHPUT, throughput)) | |
| goto nla_put_failure; | |
| genlmsg_end(msg, hdr); | |
| return 0; | |
| nla_put_failure: | |
| genlmsg_cancel(msg, hdr); | |
| return -EMSGSIZE; | |
| } | |
| /** | |
| * batadv_v_neigh_dump_hardif() - Dump the neighbours of a hard interface into | |
| * a message | |
| * @msg: Netlink message to dump into | |
| * @portid: Port making netlink request | |
| * @seq: Sequence number of netlink message | |
| * @bat_priv: The bat priv with all the mesh interface information | |
| * @hard_iface: The hard interface to be dumped | |
| * @idx_s: Entries to be skipped | |
| * | |
| * This function assumes the caller holds rcu_read_lock(). | |
| * | |
| * Return: Error code, or 0 on success | |
| */ | |
| static int | |
| batadv_v_neigh_dump_hardif(struct sk_buff *msg, u32 portid, u32 seq, | |
| struct batadv_priv *bat_priv, | |
| struct batadv_hard_iface *hard_iface, | |
| int *idx_s) | |
| { | |
| struct batadv_hardif_neigh_node *hardif_neigh; | |
| int idx = 0; | |
| hlist_for_each_entry_rcu(hardif_neigh, | |
| &hard_iface->neigh_list, list) { | |
| if (idx++ < *idx_s) | |
| continue; | |
| if (batadv_v_neigh_dump_neigh(msg, portid, seq, hardif_neigh)) { | |
| *idx_s = idx - 1; | |
| return -EMSGSIZE; | |
| } | |
| } | |
| *idx_s = 0; | |
| return 0; | |
| } | |
| /** | |
| * batadv_v_neigh_dump() - Dump the neighbours of a hard interface into a | |
| * message | |
| * @msg: Netlink message to dump into | |
| * @cb: Control block containing additional options | |
| * @bat_priv: The bat priv with all the mesh interface information | |
| * @single_hardif: Limit dumping to this hard interface | |
| */ | |
| static void | |
| batadv_v_neigh_dump(struct sk_buff *msg, struct netlink_callback *cb, | |
| struct batadv_priv *bat_priv, | |
| struct batadv_hard_iface *single_hardif) | |
| { | |
| int portid = NETLINK_CB(cb->skb).portid; | |
| struct batadv_hard_iface *hard_iface; | |
| int i_hardif_s = cb->args[0]; | |
| struct list_head *iter; | |
| int idx = cb->args[1]; | |
| int i_hardif = 0; | |
| rcu_read_lock(); | |
| if (single_hardif) { | |
| if (i_hardif_s == 0) { | |
| if (batadv_v_neigh_dump_hardif(msg, portid, | |
| cb->nlh->nlmsg_seq, | |
| bat_priv, single_hardif, | |
| &idx) == 0) | |
| i_hardif++; | |
| } | |
| } else { | |
| netdev_for_each_lower_private_rcu(bat_priv->mesh_iface, hard_iface, iter) { | |
| if (i_hardif++ < i_hardif_s) | |
| continue; | |
| if (batadv_v_neigh_dump_hardif(msg, portid, | |
| cb->nlh->nlmsg_seq, | |
| bat_priv, hard_iface, | |
| &idx)) { | |
| i_hardif--; | |
| break; | |
| } | |
| } | |
| } | |
| rcu_read_unlock(); | |
| cb->args[0] = i_hardif; | |
| cb->args[1] = idx; | |
| } | |
| /** | |
| * batadv_v_orig_dump_subentry() - Dump an originator subentry into a message | |
| * @msg: Netlink message to dump into | |
| * @portid: Port making netlink request | |
| * @seq: Sequence number of netlink message | |
| * @bat_priv: The bat priv with all the mesh interface information | |
| * @if_outgoing: Limit dump to entries with this outgoing interface | |
| * @orig_node: Originator to dump | |
| * @neigh_node: Single hops neighbour | |
| * @best: Is the best originator | |
| * | |
| * Return: Error code, or 0 on success | |
| */ | |
| static int | |
| batadv_v_orig_dump_subentry(struct sk_buff *msg, u32 portid, u32 seq, | |
| struct batadv_priv *bat_priv, | |
| struct batadv_hard_iface *if_outgoing, | |
| struct batadv_orig_node *orig_node, | |
| struct batadv_neigh_node *neigh_node, | |
| bool best) | |
| { | |
| struct batadv_neigh_ifinfo *n_ifinfo; | |
| unsigned int last_seen_msecs; | |
| u32 throughput; | |
| void *hdr; | |
| n_ifinfo = batadv_neigh_ifinfo_get(neigh_node, if_outgoing); | |
| if (!n_ifinfo) | |
| return 0; | |
| throughput = n_ifinfo->bat_v.throughput * 100; | |
| batadv_neigh_ifinfo_put(n_ifinfo); | |
| last_seen_msecs = jiffies_to_msecs(jiffies - orig_node->last_seen); | |
| if (if_outgoing != BATADV_IF_DEFAULT && | |
| if_outgoing != neigh_node->if_incoming) | |
| return 0; | |
| hdr = genlmsg_put(msg, portid, seq, &batadv_netlink_family, NLM_F_MULTI, | |
| BATADV_CMD_GET_ORIGINATORS); | |
| if (!hdr) | |
| return -ENOBUFS; | |
| if (nla_put(msg, BATADV_ATTR_ORIG_ADDRESS, ETH_ALEN, orig_node->orig) || | |
| nla_put(msg, BATADV_ATTR_NEIGH_ADDRESS, ETH_ALEN, | |
| neigh_node->addr) || | |
| nla_put_string(msg, BATADV_ATTR_HARD_IFNAME, | |
| neigh_node->if_incoming->net_dev->name) || | |
| nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX, | |
| neigh_node->if_incoming->net_dev->ifindex) || | |
| nla_put_u32(msg, BATADV_ATTR_THROUGHPUT, throughput) || | |
| nla_put_u32(msg, BATADV_ATTR_LAST_SEEN_MSECS, | |
| last_seen_msecs)) | |
| goto nla_put_failure; | |
| if (best && nla_put_flag(msg, BATADV_ATTR_FLAG_BEST)) | |
| goto nla_put_failure; | |
| genlmsg_end(msg, hdr); | |
| return 0; | |
| nla_put_failure: | |
| genlmsg_cancel(msg, hdr); | |
| return -EMSGSIZE; | |
| } | |
| /** | |
| * batadv_v_orig_dump_entry() - Dump an originator entry into a message | |
| * @msg: Netlink message to dump into | |
| * @portid: Port making netlink request | |
| * @seq: Sequence number of netlink message | |
| * @bat_priv: The bat priv with all the mesh interface information | |
| * @if_outgoing: Limit dump to entries with this outgoing interface | |
| * @orig_node: Originator to dump | |
| * @sub_s: Number of sub entries to skip | |
| * | |
| * This function assumes the caller holds rcu_read_lock(). | |
| * | |
| * Return: Error code, or 0 on success | |
| */ | |
| static int | |
| batadv_v_orig_dump_entry(struct sk_buff *msg, u32 portid, u32 seq, | |
| struct batadv_priv *bat_priv, | |
| struct batadv_hard_iface *if_outgoing, | |
| struct batadv_orig_node *orig_node, int *sub_s) | |
| { | |
| struct batadv_neigh_node *neigh_node_best; | |
| struct batadv_neigh_node *neigh_node; | |
| int sub = 0; | |
| bool best; | |
| neigh_node_best = batadv_orig_router_get(orig_node, if_outgoing); | |
| if (!neigh_node_best) | |
| goto out; | |
| hlist_for_each_entry_rcu(neigh_node, &orig_node->neigh_list, list) { | |
| if (sub++ < *sub_s) | |
| continue; | |
| best = (neigh_node == neigh_node_best); | |
| if (batadv_v_orig_dump_subentry(msg, portid, seq, bat_priv, | |
| if_outgoing, orig_node, | |
| neigh_node, best)) { | |
| batadv_neigh_node_put(neigh_node_best); | |
| *sub_s = sub - 1; | |
| return -EMSGSIZE; | |
| } | |
| } | |
| out: | |
| batadv_neigh_node_put(neigh_node_best); | |
| *sub_s = 0; | |
| return 0; | |
| } | |
| /** | |
| * batadv_v_orig_dump_bucket() - Dump an originator bucket into a message | |
| * @msg: Netlink message to dump into | |
| * @portid: Port making netlink request | |
| * @seq: Sequence number of netlink message | |
| * @bat_priv: The bat priv with all the mesh interface information | |
| * @if_outgoing: Limit dump to entries with this outgoing interface | |
| * @head: Bucket to be dumped | |
| * @idx_s: Number of entries to be skipped | |
| * @sub: Number of sub entries to be skipped | |
| * | |
| * Return: Error code, or 0 on success | |
| */ | |
| static int | |
| batadv_v_orig_dump_bucket(struct sk_buff *msg, u32 portid, u32 seq, | |
| struct batadv_priv *bat_priv, | |
| struct batadv_hard_iface *if_outgoing, | |
| struct hlist_head *head, int *idx_s, int *sub) | |
| { | |
| struct batadv_orig_node *orig_node; | |
| int idx = 0; | |
| rcu_read_lock(); | |
| hlist_for_each_entry_rcu(orig_node, head, hash_entry) { | |
| if (idx++ < *idx_s) | |
| continue; | |
| if (batadv_v_orig_dump_entry(msg, portid, seq, bat_priv, | |
| if_outgoing, orig_node, sub)) { | |
| rcu_read_unlock(); | |
| *idx_s = idx - 1; | |
| return -EMSGSIZE; | |
| } | |
| } | |
| rcu_read_unlock(); | |
| *idx_s = 0; | |
| *sub = 0; | |
| return 0; | |
| } | |
| /** | |
| * batadv_v_orig_dump() - Dump the originators into a message | |
| * @msg: Netlink message to dump into | |
| * @cb: Control block containing additional options | |
| * @bat_priv: The bat priv with all the mesh interface information | |
| * @if_outgoing: Limit dump to entries with this outgoing interface | |
| */ | |
| static void | |
| batadv_v_orig_dump(struct sk_buff *msg, struct netlink_callback *cb, | |
| struct batadv_priv *bat_priv, | |
| struct batadv_hard_iface *if_outgoing) | |
| { | |
| struct batadv_hashtable *hash = bat_priv->orig_hash; | |
| int portid = NETLINK_CB(cb->skb).portid; | |
| int bucket = cb->args[0]; | |
| struct hlist_head *head; | |
| int idx = cb->args[1]; | |
| int sub = cb->args[2]; | |
| while (bucket < hash->size) { | |
| head = &hash->table[bucket]; | |
| if (batadv_v_orig_dump_bucket(msg, portid, | |
| cb->nlh->nlmsg_seq, | |
| bat_priv, if_outgoing, head, &idx, | |
| &sub)) | |
| break; | |
| bucket++; | |
| } | |
| cb->args[0] = bucket; | |
| cb->args[1] = idx; | |
| cb->args[2] = sub; | |
| } | |
| /** | |
| * batadv_v_neigh_cmp() - compare two B.A.T.M.A.N. V neighbours by throughput | |
| * @neigh1: first neighbour to compare | |
| * @if_outgoing1: outgoing interface to use for @neigh1 | |
| * @neigh2: second neighbour to compare | |
| * @if_outgoing2: outgoing interface to use for @neigh2 | |
| * | |
| * Return: a positive value if @neigh1 is better, a negative value if @neigh2 | |
| * is better and 0 if both have equal throughput | |
| */ | |
| static int batadv_v_neigh_cmp(struct batadv_neigh_node *neigh1, | |
| struct batadv_hard_iface *if_outgoing1, | |
| struct batadv_neigh_node *neigh2, | |
| struct batadv_hard_iface *if_outgoing2) | |
| { | |
| struct batadv_neigh_ifinfo *ifinfo1; | |
| struct batadv_neigh_ifinfo *ifinfo2; | |
| int ret = 0; | |
| ifinfo1 = batadv_neigh_ifinfo_get(neigh1, if_outgoing1); | |
| if (!ifinfo1) | |
| goto err_ifinfo1; | |
| ifinfo2 = batadv_neigh_ifinfo_get(neigh2, if_outgoing2); | |
| if (!ifinfo2) | |
| goto err_ifinfo2; | |
| ret = ifinfo1->bat_v.throughput - ifinfo2->bat_v.throughput; | |
| batadv_neigh_ifinfo_put(ifinfo2); | |
| err_ifinfo2: | |
| batadv_neigh_ifinfo_put(ifinfo1); | |
| err_ifinfo1: | |
| return ret; | |
| } | |
| /** | |
| * batadv_v_neigh_is_sob() - check whether two B.A.T.M.A.N. V neighbours have | |
| * a similar or better throughput | |
| * @neigh1: first neighbour to compare | |
| * @if_outgoing1: outgoing interface to use for @neigh1 | |
| * @neigh2: second neighbour to compare | |
| * @if_outgoing2: outgoing interface to use for @neigh2 | |
| * | |
| * Return: true if the throughput of @neigh2 is at least 3/4 of the | |
| * @neigh1 throughput | |
| */ | |
| static bool batadv_v_neigh_is_sob(struct batadv_neigh_node *neigh1, | |
| struct batadv_hard_iface *if_outgoing1, | |
| struct batadv_neigh_node *neigh2, | |
| struct batadv_hard_iface *if_outgoing2) | |
| { | |
| struct batadv_neigh_ifinfo *ifinfo1; | |
| struct batadv_neigh_ifinfo *ifinfo2; | |
| bool ret = false; | |
| u32 threshold; | |
| ifinfo1 = batadv_neigh_ifinfo_get(neigh1, if_outgoing1); | |
| if (!ifinfo1) | |
| goto err_ifinfo1; | |
| ifinfo2 = batadv_neigh_ifinfo_get(neigh2, if_outgoing2); | |
| if (!ifinfo2) | |
| goto err_ifinfo2; | |
| threshold = ifinfo1->bat_v.throughput / 4; | |
| threshold = ifinfo1->bat_v.throughput - threshold; | |
| ret = ifinfo2->bat_v.throughput > threshold; | |
| batadv_neigh_ifinfo_put(ifinfo2); | |
| err_ifinfo2: | |
| batadv_neigh_ifinfo_put(ifinfo1); | |
| err_ifinfo1: | |
| return ret; | |
| } | |
| /** | |
| * batadv_v_init_sel_class() - initialize GW selection class | |
| * @bat_priv: the bat priv with all the mesh interface information | |
| */ | |
| static void batadv_v_init_sel_class(struct batadv_priv *bat_priv) | |
| { | |
| /* set default throughput difference threshold to 5Mbps */ | |
| WRITE_ONCE(bat_priv->gw.sel_class, 50); | |
| } | |
| /** | |
| * batadv_v_gw_throughput_get() - retrieve the GW-bandwidth for a given GW | |
| * @gw_node: the GW to retrieve the metric for | |
| * @bw: the pointer where the metric will be stored. The metric is computed as | |
| * the minimum between the GW advertised throughput and the path throughput to | |
| * it in the mesh | |
| * | |
| * Return: 0 on success, -1 on failure | |
| */ | |
| static int batadv_v_gw_throughput_get(struct batadv_gw_node *gw_node, u32 *bw) | |
| { | |
| struct batadv_neigh_ifinfo *router_ifinfo = NULL; | |
| struct batadv_orig_node *orig_node; | |
| struct batadv_neigh_node *router; | |
| int ret = -1; | |
| orig_node = gw_node->orig_node; | |
| router = batadv_orig_router_get(orig_node, BATADV_IF_DEFAULT); | |
| if (!router) | |
| goto out; | |
| router_ifinfo = batadv_neigh_ifinfo_get(router, BATADV_IF_DEFAULT); | |
| if (!router_ifinfo) | |
| goto out; | |
| /* the GW metric is computed as the minimum between the path throughput | |
| * to reach the GW itself and the advertised bandwidth. | |
| * This gives us an approximation of the effective throughput that the | |
| * client can expect via this particular GW node | |
| */ | |
| *bw = router_ifinfo->bat_v.throughput; | |
| *bw = min_t(u32, *bw, gw_node->bandwidth_down); | |
| ret = 0; | |
| out: | |
| batadv_neigh_node_put(router); | |
| batadv_neigh_ifinfo_put(router_ifinfo); | |
| return ret; | |
| } | |
| /** | |
| * batadv_v_gw_get_best_gw_node() - retrieve the best GW node | |
| * @bat_priv: the bat priv with all the mesh interface information | |
| * | |
| * Return: the GW node having the best GW-metric, NULL if no GW is known | |
| */ | |
| static struct batadv_gw_node * | |
| batadv_v_gw_get_best_gw_node(struct batadv_priv *bat_priv) | |
| { | |
| struct batadv_gw_node *curr_gw = NULL; | |
| struct batadv_gw_node *gw_node; | |
| u32 max_bw = 0; | |
| u32 bw; | |
| rcu_read_lock(); | |
| hlist_for_each_entry_rcu(gw_node, &bat_priv->gw.gateway_list, list) { | |
| if (!kref_get_unless_zero(&gw_node->refcount)) | |
| continue; | |
| if (batadv_v_gw_throughput_get(gw_node, &bw) < 0) | |
| goto next; | |
| if (curr_gw && bw <= max_bw) | |
| goto next; | |
| batadv_gw_node_put(curr_gw); | |
| curr_gw = gw_node; | |
| kref_get(&curr_gw->refcount); | |
| max_bw = bw; | |
| next: | |
| batadv_gw_node_put(gw_node); | |
| } | |
| rcu_read_unlock(); | |
| return curr_gw; | |
| } | |
| /** | |
| * batadv_v_gw_is_eligible() - check if an originator would be selected as GW | |
| * @bat_priv: the bat priv with all the mesh interface information | |
| * @curr_gw_orig: originator representing the currently selected GW | |
| * @orig_node: the originator representing the new candidate | |
| * | |
| * Return: true if orig_node can be selected as current GW, false otherwise | |
| */ | |
| static bool batadv_v_gw_is_eligible(struct batadv_priv *bat_priv, | |
| struct batadv_orig_node *curr_gw_orig, | |
| struct batadv_orig_node *orig_node) | |
| { | |
| struct batadv_gw_node *orig_gw = NULL; | |
| struct batadv_gw_node *curr_gw; | |
| u32 orig_throughput; | |
| u32 gw_throughput; | |
| bool ret = false; | |
| u32 threshold; | |
| threshold = READ_ONCE(bat_priv->gw.sel_class); | |
| curr_gw = batadv_gw_node_get(bat_priv, curr_gw_orig); | |
| if (!curr_gw) { | |
| ret = true; | |
| goto out; | |
| } | |
| if (batadv_v_gw_throughput_get(curr_gw, &gw_throughput) < 0) { | |
| ret = true; | |
| goto out; | |
| } | |
| orig_gw = batadv_gw_node_get(bat_priv, orig_node); | |
| if (!orig_gw) | |
| goto out; | |
| if (batadv_v_gw_throughput_get(orig_gw, &orig_throughput) < 0) | |
| goto out; | |
| if (orig_throughput < gw_throughput) | |
| goto out; | |
| if ((orig_throughput - gw_throughput) < threshold) | |
| goto out; | |
| batadv_dbg(BATADV_DBG_BATMAN, bat_priv, | |
| "Restarting gateway selection: better gateway found (throughput curr: %u, throughput new: %u)\n", | |
| gw_throughput, orig_throughput); | |
| ret = true; | |
| out: | |
| batadv_gw_node_put(curr_gw); | |
| batadv_gw_node_put(orig_gw); | |
| return ret; | |
| } | |
| /** | |
| * batadv_v_gw_dump_entry() - Dump a gateway into a message | |
| * @msg: Netlink message to dump into | |
| * @portid: Port making netlink request | |
| * @cb: Control block containing additional options | |
| * @bat_priv: The bat priv with all the mesh interface information | |
| * @gw_node: Gateway to be dumped | |
| * | |
| * Return: Error code, or 0 on success | |
| */ | |
| static int batadv_v_gw_dump_entry(struct sk_buff *msg, u32 portid, | |
| struct netlink_callback *cb, | |
| struct batadv_priv *bat_priv, | |
| struct batadv_gw_node *gw_node) | |
| { | |
| struct batadv_neigh_ifinfo *router_ifinfo = NULL; | |
| struct batadv_gw_node *curr_gw = NULL; | |
| struct batadv_neigh_node *router; | |
| int ret = 0; | |
| void *hdr; | |
| router = batadv_orig_router_get(gw_node->orig_node, BATADV_IF_DEFAULT); | |
| if (!router) | |
| goto out; | |
| router_ifinfo = batadv_neigh_ifinfo_get(router, BATADV_IF_DEFAULT); | |
| if (!router_ifinfo) | |
| goto out; | |
| curr_gw = batadv_gw_get_selected_gw_node(bat_priv); | |
| hdr = genlmsg_put(msg, portid, cb->nlh->nlmsg_seq, | |
| &batadv_netlink_family, NLM_F_MULTI, | |
| BATADV_CMD_GET_GATEWAYS); | |
| if (!hdr) { | |
| ret = -ENOBUFS; | |
| goto out; | |
| } | |
| genl_dump_check_consistent(cb, hdr); | |
| ret = -EMSGSIZE; | |
| if (curr_gw == gw_node) { | |
| if (nla_put_flag(msg, BATADV_ATTR_FLAG_BEST)) { | |
| genlmsg_cancel(msg, hdr); | |
| goto out; | |
| } | |
| } | |
| if (nla_put(msg, BATADV_ATTR_ORIG_ADDRESS, ETH_ALEN, | |
| gw_node->orig_node->orig)) { | |
| genlmsg_cancel(msg, hdr); | |
| goto out; | |
| } | |
| if (nla_put_u32(msg, BATADV_ATTR_THROUGHPUT, | |
| router_ifinfo->bat_v.throughput)) { | |
| genlmsg_cancel(msg, hdr); | |
| goto out; | |
| } | |
| if (nla_put(msg, BATADV_ATTR_ROUTER, ETH_ALEN, router->addr)) { | |
| genlmsg_cancel(msg, hdr); | |
| goto out; | |
| } | |
| if (nla_put_string(msg, BATADV_ATTR_HARD_IFNAME, | |
| router->if_incoming->net_dev->name)) { | |
| genlmsg_cancel(msg, hdr); | |
| goto out; | |
| } | |
| if (nla_put_u32(msg, BATADV_ATTR_HARD_IFINDEX, | |
| router->if_incoming->net_dev->ifindex)) { | |
| genlmsg_cancel(msg, hdr); | |
| goto out; | |
| } | |
| if (nla_put_u32(msg, BATADV_ATTR_BANDWIDTH_DOWN, | |
| gw_node->bandwidth_down)) { | |
| genlmsg_cancel(msg, hdr); | |
| goto out; | |
| } | |
| if (nla_put_u32(msg, BATADV_ATTR_BANDWIDTH_UP, gw_node->bandwidth_up)) { | |
| genlmsg_cancel(msg, hdr); | |
| goto out; | |
| } | |
| genlmsg_end(msg, hdr); | |
| ret = 0; | |
| out: | |
| batadv_gw_node_put(curr_gw); | |
| batadv_neigh_ifinfo_put(router_ifinfo); | |
| batadv_neigh_node_put(router); | |
| return ret; | |
| } | |
| /** | |
| * batadv_v_gw_dump() - Dump gateways into a message | |
| * @msg: Netlink message to dump into | |
| * @cb: Control block containing additional options | |
| * @bat_priv: The bat priv with all the mesh interface information | |
| */ | |
| static void batadv_v_gw_dump(struct sk_buff *msg, struct netlink_callback *cb, | |
| struct batadv_priv *bat_priv) | |
| { | |
| int portid = NETLINK_CB(cb->skb).portid; | |
| struct batadv_gw_node *gw_node; | |
| int idx_skip = cb->args[0]; | |
| int idx = 0; | |
| spin_lock_bh(&bat_priv->gw.list_lock); | |
| cb->seq = bat_priv->gw.generation << 1 | 1; | |
| hlist_for_each_entry(gw_node, &bat_priv->gw.gateway_list, list) { | |
| if (idx++ < idx_skip) | |
| continue; | |
| if (batadv_v_gw_dump_entry(msg, portid, cb, bat_priv, | |
| gw_node)) { | |
| idx_skip = idx - 1; | |
| goto unlock; | |
| } | |
| } | |
| idx_skip = idx; | |
| unlock: | |
| spin_unlock_bh(&bat_priv->gw.list_lock); | |
| cb->args[0] = idx_skip; | |
| } | |
| static struct batadv_algo_ops batadv_batman_v __read_mostly = { | |
| .name = "BATMAN_V", | |
| .iface = { | |
| .activate = batadv_v_iface_activate, | |
| .enable = batadv_v_iface_enable, | |
| .disable = batadv_v_iface_disable, | |
| .update_mac = batadv_v_iface_update_mac, | |
| .primary_set = batadv_v_primary_iface_set, | |
| }, | |
| .neigh = { | |
| .hardif_init = batadv_v_hardif_neigh_init, | |
| .cmp = batadv_v_neigh_cmp, | |
| .is_similar_or_better = batadv_v_neigh_is_sob, | |
| .dump = batadv_v_neigh_dump, | |
| }, | |
| .orig = { | |
| .dump = batadv_v_orig_dump, | |
| }, | |
| .gw = { | |
| .init_sel_class = batadv_v_init_sel_class, | |
| .sel_class_max = U32_MAX, | |
| .get_best_gw_node = batadv_v_gw_get_best_gw_node, | |
| .is_eligible = batadv_v_gw_is_eligible, | |
| .dump = batadv_v_gw_dump, | |
| }, | |
| }; | |
| /** | |
| * batadv_v_hardif_init() - initialize the algorithm specific fields in the | |
| * hard-interface object | |
| * @hard_iface: the hard-interface to initialize | |
| */ | |
| void batadv_v_hardif_init(struct batadv_hard_iface *hard_iface) | |
| { | |
| /* enable link throughput auto-detection by setting the throughput | |
| * override to zero | |
| */ | |
| WRITE_ONCE(hard_iface->bat_v.throughput_override, 0); | |
| WRITE_ONCE(hard_iface->bat_v.elp_interval, 500); | |
| hard_iface->bat_v.aggr_len = 0; | |
| skb_queue_head_init(&hard_iface->bat_v.aggr_list); | |
| hard_iface->bat_v.aggr_list_enabled = false; | |
| INIT_DELAYED_WORK(&hard_iface->bat_v.aggr_wq, | |
| batadv_v_ogm_aggr_work); | |
| /* make sure it doesn't run until interface gets enabled */ | |
| disable_delayed_work(&hard_iface->bat_v.aggr_wq); | |
| } | |
| /** | |
| * batadv_v_mesh_init() - initialize the B.A.T.M.A.N. V private resources for a | |
| * mesh | |
| * @bat_priv: the object representing the mesh interface to initialise | |
| * | |
| * Return: 0 on success or a negative error code otherwise | |
| */ | |
| int batadv_v_mesh_init(struct batadv_priv *bat_priv) | |
| { | |
| int ret = 0; | |
| ret = batadv_v_ogm_init(bat_priv); | |
| if (ret < 0) | |
| return ret; | |
| return 0; | |
| } | |
| /** | |
| * batadv_v_mesh_free() - free the B.A.T.M.A.N. V private resources for a mesh | |
| * @bat_priv: the object representing the mesh interface to free | |
| */ | |
| void batadv_v_mesh_free(struct batadv_priv *bat_priv) | |
| { | |
| batadv_v_ogm_free(bat_priv); | |
| } | |
| /** | |
| * batadv_v_init() - B.A.T.M.A.N. V initialization function | |
| * | |
| * Description: Takes care of initializing all the subcomponents. | |
| * It is invoked upon module load only. | |
| * | |
| * Return: 0 on success or a negative error code otherwise | |
| */ | |
| int __init batadv_v_init(void) | |
| { | |
| int ret; | |
| /* B.A.T.M.A.N. V echo location protocol packet */ | |
| ret = batadv_recv_handler_register(BATADV_ELP, | |
| batadv_v_elp_packet_recv); | |
| if (ret < 0) | |
| return ret; | |
| ret = batadv_recv_handler_register(BATADV_OGM2, | |
| batadv_v_ogm_packet_recv); | |
| if (ret < 0) | |
| goto elp_unregister; | |
| ret = batadv_algo_register(&batadv_batman_v); | |
| if (ret < 0) | |
| goto ogm_unregister; | |
| return ret; | |
| ogm_unregister: | |
| batadv_recv_handler_unregister(BATADV_OGM2); | |
| elp_unregister: | |
| batadv_recv_handler_unregister(BATADV_ELP); | |
| return ret; | |
| } | |
| /** | |
| * batadv_v_deinit() - B.A.T.M.A.N. V deinitialization function | |
| */ | |
| void batadv_v_deinit(void) | |
| { | |
| batadv_recv_handler_unregister(BATADV_OGM2); | |
| batadv_recv_handler_unregister(BATADV_ELP); | |
| } |