| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Workingset detection | |
| * | |
| * Copyright (C) 2013 Red Hat, Inc., Johannes Weiner | |
| */ | |
| #include <linux/memcontrol.h> | |
| #include <linux/mm_inline.h> | |
| #include <linux/writeback.h> | |
| #include <linux/shmem_fs.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/atomic.h> | |
| #include <linux/module.h> | |
| #include <linux/swap.h> | |
| #include <linux/dax.h> | |
| #include <linux/fs.h> | |
| #include <linux/mm.h> | |
| #include "swap_table.h" | |
| #include "internal.h" | |
| /* | |
| * Double CLOCK lists | |
| * | |
| * Per node, two clock lists are maintained for file pages: the | |
| * inactive and the active list. Freshly faulted pages start out at | |
| * the head of the inactive list and page reclaim scans pages from the | |
| * tail. Pages that are accessed multiple times on the inactive list | |
| * are promoted to the active list, to protect them from reclaim, | |
| * whereas active pages are demoted to the inactive list when the | |
| * active list grows too big. | |
| * | |
| * fault ------------------------+ | |
| * | | |
| * +--------------+ | +-------------+ | |
| * reclaim <- | inactive | <-+-- demotion | active | <--+ | |
| * +--------------+ +-------------+ | | |
| * | | | |
| * +-------------- promotion ------------------+ | |
| * | |
| * | |
| * Access frequency and refault distance | |
| * | |
| * A workload is thrashing when its pages are frequently used but they | |
| * are evicted from the inactive list every time before another access | |
| * would have promoted them to the active list. | |
| * | |
| * In cases where the average access distance between thrashing pages | |
| * is bigger than the size of memory there is nothing that can be | |
| * done - the thrashing set could never fit into memory under any | |
| * circumstance. | |
| * | |
| * However, the average access distance could be bigger than the | |
| * inactive list, yet smaller than the size of memory. In this case, | |
| * the set could fit into memory if it weren't for the currently | |
| * active pages - which may be used more, hopefully less frequently: | |
| * | |
| * +-memory available to cache-+ | |
| * | | | |
| * +-inactive------+-active----+ | |
| * a b | c d e f g h i | J K L M N | | |
| * +---------------+-----------+ | |
| * | |
| * It is prohibitively expensive to accurately track access frequency | |
| * of pages. But a reasonable approximation can be made to measure | |
| * thrashing on the inactive list, after which refaulting pages can be | |
| * activated optimistically to compete with the existing active pages. | |
| * | |
| * Approximating inactive page access frequency - Observations: | |
| * | |
| * 1. When a page is accessed for the first time, it is added to the | |
| * head of the inactive list, slides every existing inactive page | |
| * towards the tail by one slot, and pushes the current tail page | |
| * out of memory. | |
| * | |
| * 2. When a page is accessed for the second time, it is promoted to | |
| * the active list, shrinking the inactive list by one slot. This | |
| * also slides all inactive pages that were faulted into the cache | |
| * more recently than the activated page towards the tail of the | |
| * inactive list. | |
| * | |
| * Thus: | |
| * | |
| * 1. The sum of evictions and activations between any two points in | |
| * time indicate the minimum number of inactive pages accessed in | |
| * between. | |
| * | |
| * 2. Moving one inactive page N page slots towards the tail of the | |
| * list requires at least N inactive page accesses. | |
| * | |
| * Combining these: | |
| * | |
| * 1. When a page is finally evicted from memory, the number of | |
| * inactive pages accessed while the page was in cache is at least | |
| * the number of page slots on the inactive list. | |
| * | |
| * 2. In addition, measuring the sum of evictions and activations (E) | |
| * at the time of a page's eviction, and comparing it to another | |
| * reading (R) at the time the page faults back into memory tells | |
| * the minimum number of accesses while the page was not cached. | |
| * This is called the refault distance. | |
| * | |
| * Because the first access of the page was the fault and the second | |
| * access the refault, we combine the in-cache distance with the | |
| * out-of-cache distance to get the complete minimum access distance | |
| * of this page: | |
| * | |
| * NR_inactive + (R - E) | |
| * | |
| * And knowing the minimum access distance of a page, we can easily | |
| * tell if the page would be able to stay in cache assuming all page | |
| * slots in the cache were available: | |
| * | |
| * NR_inactive + (R - E) <= NR_inactive + NR_active | |
| * | |
| * If we have swap we should consider about NR_inactive_anon and | |
| * NR_active_anon, so for page cache and anonymous respectively: | |
| * | |
| * NR_inactive_file + (R - E) <= NR_inactive_file + NR_active_file | |
| * + NR_inactive_anon + NR_active_anon | |
| * | |
| * NR_inactive_anon + (R - E) <= NR_inactive_anon + NR_active_anon | |
| * + NR_inactive_file + NR_active_file | |
| * | |
| * Which can be further simplified to: | |
| * | |
| * (R - E) <= NR_active_file + NR_inactive_anon + NR_active_anon | |
| * | |
| * (R - E) <= NR_active_anon + NR_inactive_file + NR_active_file | |
| * | |
| * Put into words, the refault distance (out-of-cache) can be seen as | |
| * a deficit in inactive list space (in-cache). If the inactive list | |
| * had (R - E) more page slots, the page would not have been evicted | |
| * in between accesses, but activated instead. And on a full system, | |
| * the only thing eating into inactive list space is active pages. | |
| * | |
| * | |
| * Refaulting inactive pages | |
| * | |
| * All that is known about the active list is that the pages have been | |
| * accessed more than once in the past. This means that at any given | |
| * time there is actually a good chance that pages on the active list | |
| * are no longer in active use. | |
| * | |
| * So when a refault distance of (R - E) is observed and there are at | |
| * least (R - E) pages in the userspace workingset, the refaulting page | |
| * is activated optimistically in the hope that (R - E) pages are actually | |
| * used less frequently than the refaulting page - or even not used at | |
| * all anymore. | |
| * | |
| * That means if inactive cache is refaulting with a suitable refault | |
| * distance, we assume the cache workingset is transitioning and put | |
| * pressure on the current workingset. | |
| * | |
| * If this is wrong and demotion kicks in, the pages which are truly | |
| * used more frequently will be reactivated while the less frequently | |
| * used once will be evicted from memory. | |
| * | |
| * But if this is right, the stale pages will be pushed out of memory | |
| * and the used pages get to stay in cache. | |
| * | |
| * Refaulting active pages | |
| * | |
| * If on the other hand the refaulting pages have recently been | |
| * deactivated, it means that the active list is no longer protecting | |
| * actively used cache from reclaim. The cache is NOT transitioning to | |
| * a different workingset; the existing workingset is thrashing in the | |
| * space allocated to the page cache. | |
| * | |
| * | |
| * Implementation | |
| * | |
| * For each node's LRU lists, a counter for inactive evictions and | |
| * activations is maintained (node->nonresident_age). | |
| * | |
| * On eviction, a snapshot of this counter (along with some bits to | |
| * identify the node) is stored in the now empty page cache | |
| * slot of the evicted page. This is called a shadow entry. | |
| * | |
| * On cache misses for which there are shadow entries, an eligible | |
| * refault distance will immediately activate the refaulting page. | |
| */ | |
| #define WORKINGSET_SHIFT 1 | |
| #define EVICTION_SHIFT ((BITS_PER_LONG - BITS_PER_XA_VALUE) + \ | |
| WORKINGSET_SHIFT + NODES_SHIFT + \ | |
| MEM_CGROUP_ID_SHIFT) | |
| #define EVICTION_SHIFT_ANON (EVICTION_SHIFT + SWAP_COUNT_SHIFT) | |
| #define EVICTION_MASK (~0UL >> EVICTION_SHIFT) | |
| #define EVICTION_MASK_ANON (~0UL >> EVICTION_SHIFT_ANON) | |
| /* | |
| * Eviction timestamps need to be able to cover the full range of | |
| * actionable refaults. However, bits are tight in the xarray | |
| * entry, and after storing the identifier for the lruvec there might | |
| * not be enough left to represent every single actionable refault. In | |
| * that case, we have to sacrifice granularity for distance, and group | |
| * evictions into coarser buckets by shaving off lower timestamp bits. | |
| */ | |
| static unsigned int bucket_order[ANON_AND_FILE] __read_mostly; | |
| static void *pack_shadow(int memcgid, pg_data_t *pgdat, unsigned long eviction, | |
| bool workingset, bool file) | |
| { | |
| eviction &= file ? EVICTION_MASK : EVICTION_MASK_ANON; | |
| eviction = (eviction << MEM_CGROUP_ID_SHIFT) | memcgid; | |
| eviction = (eviction << NODES_SHIFT) | pgdat->node_id; | |
| eviction = (eviction << WORKINGSET_SHIFT) | workingset; | |
| return xa_mk_value(eviction); | |
| } | |
| static void unpack_shadow(void *shadow, int *memcgidp, pg_data_t **pgdat, | |
| unsigned long *evictionp, bool *workingsetp) | |
| { | |
| unsigned long entry = xa_to_value(shadow); | |
| int memcgid, nid; | |
| bool workingset; | |
| workingset = entry & ((1UL << WORKINGSET_SHIFT) - 1); | |
| entry >>= WORKINGSET_SHIFT; | |
| nid = entry & ((1UL << NODES_SHIFT) - 1); | |
| entry >>= NODES_SHIFT; | |
| memcgid = entry & ((1UL << MEM_CGROUP_ID_SHIFT) - 1); | |
| entry >>= MEM_CGROUP_ID_SHIFT; | |
| *memcgidp = memcgid; | |
| *pgdat = NODE_DATA(nid); | |
| *evictionp = entry; | |
| *workingsetp = workingset; | |
| } | |
| #ifdef CONFIG_LRU_GEN | |
| static void *lru_gen_eviction(struct folio *folio) | |
| { | |
| int hist; | |
| unsigned long token; | |
| unsigned long min_seq; | |
| struct lruvec *lruvec; | |
| struct lru_gen_folio *lrugen; | |
| int type = folio_is_file_lru(folio); | |
| int delta = folio_nr_pages(folio); | |
| int refs = folio_lru_refs(folio); | |
| bool workingset = folio_test_workingset(folio); | |
| int tier = lru_tier_from_refs(refs, workingset); | |
| struct mem_cgroup *memcg; | |
| struct pglist_data *pgdat = folio_pgdat(folio); | |
| unsigned short memcg_id; | |
| BUILD_BUG_ON(LRU_GEN_WIDTH + LRU_REFS_WIDTH > | |
| BITS_PER_LONG - max(EVICTION_SHIFT, EVICTION_SHIFT_ANON)); | |
| rcu_read_lock(); | |
| memcg = folio_memcg(folio); | |
| lruvec = mem_cgroup_lruvec(memcg, pgdat); | |
| lrugen = &lruvec->lrugen; | |
| min_seq = READ_ONCE(lrugen->min_seq[type]); | |
| token = (min_seq << LRU_REFS_WIDTH) | max(refs - 1, 0); | |
| hist = lru_hist_from_seq(min_seq); | |
| atomic_long_add(delta, &lrugen->evicted[hist][type][tier]); | |
| memcg_id = mem_cgroup_private_id(memcg); | |
| rcu_read_unlock(); | |
| return pack_shadow(memcg_id, pgdat, token, workingset, type); | |
| } | |
| /* | |
| * Tests if the shadow entry is for a folio that was recently evicted. | |
| * Fills in @lruvec, @token, @workingset with the values unpacked from shadow. | |
| */ | |
| static bool lru_gen_test_recent(void *shadow, struct lruvec **lruvec, | |
| unsigned long *token, bool *workingset, bool file) | |
| { | |
| int memcg_id; | |
| unsigned long max_seq; | |
| struct mem_cgroup *memcg; | |
| struct pglist_data *pgdat; | |
| unpack_shadow(shadow, &memcg_id, &pgdat, token, workingset); | |
| memcg = mem_cgroup_from_private_id(memcg_id); | |
| *lruvec = mem_cgroup_lruvec(memcg, pgdat); | |
| max_seq = READ_ONCE((*lruvec)->lrugen.max_seq); | |
| max_seq &= (file ? EVICTION_MASK : EVICTION_MASK_ANON) >> LRU_REFS_WIDTH; | |
| return abs_diff(max_seq, *token >> LRU_REFS_WIDTH) < MAX_NR_GENS; | |
| } | |
| static void lru_gen_refault(struct folio *folio, void *shadow) | |
| { | |
| bool recent; | |
| int hist, tier, refs; | |
| bool workingset; | |
| unsigned long token; | |
| struct lruvec *lruvec; | |
| struct lru_gen_folio *lrugen; | |
| int type = folio_is_file_lru(folio); | |
| int delta = folio_nr_pages(folio); | |
| rcu_read_lock(); | |
| recent = lru_gen_test_recent(shadow, &lruvec, &token, &workingset, type); | |
| if (lruvec != folio_lruvec(folio)) | |
| goto unlock; | |
| mod_lruvec_state(lruvec, WORKINGSET_REFAULT_BASE + type, delta); | |
| if (!recent) | |
| goto unlock; | |
| lrugen = &lruvec->lrugen; | |
| hist = lru_hist_from_seq(READ_ONCE(lrugen->min_seq[type])); | |
| refs = (token & (BIT(LRU_REFS_WIDTH) - 1)) + 1; | |
| tier = lru_tier_from_refs(refs, workingset); | |
| atomic_long_add(delta, &lrugen->refaulted[hist][type][tier]); | |
| if (workingset) { | |
| /* | |
| * see folio_add_lru(), where folio_set_active() is | |
| * called for workingset folios | |
| */ | |
| if (lru_gen_in_fault()) | |
| mod_lruvec_state(lruvec, WORKINGSET_ACTIVATE_BASE + type, delta); | |
| folio_set_workingset(folio); | |
| mod_lruvec_state(lruvec, WORKINGSET_RESTORE_BASE + type, delta); | |
| } else | |
| set_mask_bits(&folio->flags.f, LRU_REFS_MASK, (refs - 1UL) << LRU_REFS_PGOFF); | |
| unlock: | |
| rcu_read_unlock(); | |
| } | |
| #else /* !CONFIG_LRU_GEN */ | |
| static void *lru_gen_eviction(struct folio *folio) | |
| { | |
| return NULL; | |
| } | |
| static bool lru_gen_test_recent(void *shadow, struct lruvec **lruvec, | |
| unsigned long *token, bool *workingset, bool file) | |
| { | |
| return false; | |
| } | |
| static void lru_gen_refault(struct folio *folio, void *shadow) | |
| { | |
| } | |
| #endif /* CONFIG_LRU_GEN */ | |
| /** | |
| * workingset_age_nonresident - age non-resident entries as LRU ages | |
| * @lruvec: the lruvec that was aged | |
| * @nr_pages: the number of pages to count | |
| * | |
| * As in-memory pages are aged, non-resident pages need to be aged as | |
| * well, in order for the refault distances later on to be comparable | |
| * to the in-memory dimensions. This function allows reclaim and LRU | |
| * operations to drive the non-resident aging along in parallel. | |
| */ | |
| void workingset_age_nonresident(struct lruvec *lruvec, unsigned long nr_pages) | |
| { | |
| /* | |
| * Reclaiming a cgroup means reclaiming all its children in a | |
| * round-robin fashion. That means that each cgroup has an LRU | |
| * order that is composed of the LRU orders of its child | |
| * cgroups; and every page has an LRU position not just in the | |
| * cgroup that owns it, but in all of that group's ancestors. | |
| * | |
| * So when the physical inactive list of a leaf cgroup ages, | |
| * the virtual inactive lists of all its parents, including | |
| * the root cgroup's, age as well. | |
| */ | |
| do { | |
| atomic_long_add(nr_pages, &lruvec->nonresident_age); | |
| } while ((lruvec = parent_lruvec(lruvec))); | |
| } | |
| /** | |
| * workingset_eviction - note the eviction of a folio from memory | |
| * @target_memcg: the cgroup that is causing the reclaim | |
| * @folio: the folio being evicted | |
| * | |
| * Return: a shadow entry to be stored in @folio->mapping->i_pages in place | |
| * of the evicted @folio so that a later refault can be detected. | |
| */ | |
| void *workingset_eviction(struct folio *folio, struct mem_cgroup *target_memcg) | |
| { | |
| struct pglist_data *pgdat = folio_pgdat(folio); | |
| int file = folio_is_file_lru(folio); | |
| unsigned long eviction; | |
| struct lruvec *lruvec; | |
| int memcgid; | |
| /* Folio is fully exclusive and pins folio's memory cgroup pointer */ | |
| VM_BUG_ON_FOLIO(folio_test_lru(folio), folio); | |
| VM_BUG_ON_FOLIO(folio_ref_count(folio), folio); | |
| VM_BUG_ON_FOLIO(!folio_test_locked(folio), folio); | |
| if (lru_gen_enabled()) | |
| return lru_gen_eviction(folio); | |
| lruvec = mem_cgroup_lruvec(target_memcg, pgdat); | |
| /* XXX: target_memcg can be NULL, go through lruvec */ | |
| memcgid = mem_cgroup_private_id(lruvec_memcg(lruvec)); | |
| eviction = atomic_long_read(&lruvec->nonresident_age); | |
| eviction >>= bucket_order[file]; | |
| workingset_age_nonresident(lruvec, folio_nr_pages(folio)); | |
| return pack_shadow(memcgid, pgdat, eviction, | |
| folio_test_workingset(folio), file); | |
| } | |
| /** | |
| * workingset_test_recent - tests if the shadow entry is for a folio that was | |
| * recently evicted. Also fills in @workingset with the value unpacked from | |
| * shadow. | |
| * @shadow: the shadow entry to be tested. | |
| * @file: whether the corresponding folio is from the file lru. | |
| * @workingset: where the workingset value unpacked from shadow should | |
| * be stored. | |
| * @flush: whether to flush cgroup rstat. | |
| * | |
| * Return: true if the shadow is for a recently evicted folio; false otherwise. | |
| */ | |
| bool workingset_test_recent(void *shadow, bool file, bool *workingset, | |
| bool flush) | |
| { | |
| struct mem_cgroup *eviction_memcg; | |
| struct lruvec *eviction_lruvec; | |
| unsigned long refault_distance; | |
| unsigned long workingset_size; | |
| unsigned long refault; | |
| int memcgid; | |
| struct pglist_data *pgdat; | |
| unsigned long eviction; | |
| if (lru_gen_enabled()) { | |
| bool recent; | |
| rcu_read_lock(); | |
| recent = lru_gen_test_recent(shadow, &eviction_lruvec, &eviction, | |
| workingset, file); | |
| rcu_read_unlock(); | |
| return recent; | |
| } | |
| rcu_read_lock(); | |
| unpack_shadow(shadow, &memcgid, &pgdat, &eviction, workingset); | |
| eviction <<= bucket_order[file]; | |
| /* | |
| * Look up the memcg associated with the stored ID. It might | |
| * have been deleted since the folio's eviction. | |
| * | |
| * Note that in rare events the ID could have been recycled | |
| * for a new cgroup that refaults a shared folio. This is | |
| * impossible to tell from the available data. However, this | |
| * should be a rare and limited disturbance, and activations | |
| * are always speculative anyway. Ultimately, it's the aging | |
| * algorithm's job to shake out the minimum access frequency | |
| * for the active cache. | |
| * | |
| * XXX: On !CONFIG_MEMCG, this will always return NULL; it | |
| * would be better if the root_mem_cgroup existed in all | |
| * configurations instead. | |
| */ | |
| eviction_memcg = mem_cgroup_from_private_id(memcgid); | |
| if (!mem_cgroup_tryget(eviction_memcg)) | |
| eviction_memcg = NULL; | |
| rcu_read_unlock(); | |
| if (!mem_cgroup_disabled() && !eviction_memcg) | |
| return false; | |
| /* | |
| * Flush stats (and potentially sleep) outside the RCU read section. | |
| * | |
| * Note that workingset_test_recent() itself might be called in RCU read | |
| * section (for e.g, in cachestat) - these callers need to skip flushing | |
| * stats (via the flush argument). | |
| * | |
| * XXX: With per-memcg flushing and thresholding, is ratelimiting | |
| * still needed here? | |
| */ | |
| if (flush) | |
| mem_cgroup_flush_stats_ratelimited(eviction_memcg); | |
| eviction_lruvec = mem_cgroup_lruvec(eviction_memcg, pgdat); | |
| refault = atomic_long_read(&eviction_lruvec->nonresident_age); | |
| /* | |
| * Calculate the refault distance | |
| * | |
| * The unsigned subtraction here gives an accurate distance | |
| * across nonresident_age overflows in most cases. There is a | |
| * special case: usually, shadow entries have a short lifetime | |
| * and are either refaulted or reclaimed along with the inode | |
| * before they get too old. But it is not impossible for the | |
| * nonresident_age to lap a shadow entry in the field, which | |
| * can then result in a false small refault distance, leading | |
| * to a false activation should this old entry actually | |
| * refault again. However, earlier kernels used to deactivate | |
| * unconditionally with *every* reclaim invocation for the | |
| * longest time, so the occasional inappropriate activation | |
| * leading to pressure on the active list is not a problem. | |
| */ | |
| refault_distance = ((refault - eviction) & | |
| (file ? EVICTION_MASK : EVICTION_MASK_ANON)); | |
| /* | |
| * Compare the distance to the existing workingset size. We | |
| * don't activate pages that couldn't stay resident even if | |
| * all the memory was available to the workingset. Whether | |
| * workingset competition needs to consider anon or not depends | |
| * on having free swap space. | |
| */ | |
| workingset_size = lruvec_page_state(eviction_lruvec, NR_ACTIVE_FILE); | |
| if (!file) { | |
| workingset_size += lruvec_page_state(eviction_lruvec, | |
| NR_INACTIVE_FILE); | |
| } | |
| if (mem_cgroup_get_nr_swap_pages(eviction_memcg) > 0) { | |
| workingset_size += lruvec_page_state(eviction_lruvec, | |
| NR_ACTIVE_ANON); | |
| if (file) { | |
| workingset_size += lruvec_page_state(eviction_lruvec, | |
| NR_INACTIVE_ANON); | |
| } | |
| } | |
| mem_cgroup_put(eviction_memcg); | |
| return refault_distance <= workingset_size; | |
| } | |
| /** | |
| * workingset_refault - Evaluate the refault of a previously evicted folio. | |
| * @folio: The freshly allocated replacement folio. | |
| * @shadow: Shadow entry of the evicted folio. | |
| * | |
| * Calculates and evaluates the refault distance of the previously | |
| * evicted folio in the context of the node and the memcg whose memory | |
| * pressure caused the eviction. | |
| */ | |
| void workingset_refault(struct folio *folio, void *shadow) | |
| { | |
| bool file = folio_is_file_lru(folio); | |
| struct mem_cgroup *memcg; | |
| struct lruvec *lruvec; | |
| bool workingset; | |
| long nr; | |
| VM_BUG_ON_FOLIO(!folio_test_locked(folio), folio); | |
| if (lru_gen_enabled()) { | |
| lru_gen_refault(folio, shadow); | |
| return; | |
| } | |
| /* | |
| * The activation decision for this folio is made at the level | |
| * where the eviction occurred, as that is where the LRU order | |
| * during folio reclaim is being determined. | |
| * | |
| * However, the cgroup that will own the folio is the one that | |
| * is actually experiencing the refault event. Make sure the folio is | |
| * locked to guarantee folio_memcg() stability throughout. | |
| */ | |
| nr = folio_nr_pages(folio); | |
| memcg = get_mem_cgroup_from_folio(folio); | |
| lruvec = mem_cgroup_lruvec(memcg, folio_pgdat(folio)); | |
| mod_lruvec_state(lruvec, WORKINGSET_REFAULT_BASE + file, nr); | |
| if (!workingset_test_recent(shadow, file, &workingset, true)) | |
| goto out; | |
| folio_set_active(folio); | |
| workingset_age_nonresident(lruvec, nr); | |
| mod_lruvec_state(lruvec, WORKINGSET_ACTIVATE_BASE + file, nr); | |
| /* Folio was active prior to eviction */ | |
| if (workingset) { | |
| folio_set_workingset(folio); | |
| mod_lruvec_state(lruvec, WORKINGSET_RESTORE_BASE + file, nr); | |
| } | |
| out: | |
| mem_cgroup_put(memcg); | |
| } | |
| /** | |
| * workingset_activation - note a page activation | |
| * @folio: Folio that is being activated. | |
| */ | |
| void workingset_activation(struct folio *folio) | |
| { | |
| /* | |
| * Filter non-memcg pages here, e.g. unmap can call | |
| * mark_page_accessed() on VDSO pages. | |
| */ | |
| if (mem_cgroup_disabled() || folio_memcg_charged(folio)) { | |
| rcu_read_lock(); | |
| workingset_age_nonresident(folio_lruvec(folio), folio_nr_pages(folio)); | |
| rcu_read_unlock(); | |
| } | |
| } | |
| /* | |
| * Shadow entries reflect the share of the working set that does not | |
| * fit into memory, so their number depends on the access pattern of | |
| * the workload. In most cases, they will refault or get reclaimed | |
| * along with the inode, but a (malicious) workload that streams | |
| * through files with a total size several times that of available | |
| * memory, while preventing the inodes from being reclaimed, can | |
| * create excessive amounts of shadow nodes. To keep a lid on this, | |
| * track shadow nodes and reclaim them when they grow way past the | |
| * point where they would still be useful. | |
| */ | |
| struct list_lru shadow_nodes; | |
| void workingset_update_node(struct xa_node *node) | |
| { | |
| struct page *page = virt_to_page(node); | |
| /* | |
| * Track non-empty nodes that contain only shadow entries; | |
| * unlink those that contain pages or are being freed. | |
| * | |
| * Avoid acquiring the list_lru lock when the nodes are | |
| * already where they should be. The list_empty() test is safe | |
| * as node->private_list is protected by the i_pages lock. | |
| */ | |
| lockdep_assert_held(&node->array->xa_lock); | |
| if (node->count && node->count == node->nr_values) { | |
| if (list_empty(&node->private_list)) { | |
| list_lru_add_obj(&shadow_nodes, &node->private_list); | |
| __inc_node_page_state(page, WORKINGSET_NODES); | |
| } | |
| } else { | |
| if (!list_empty(&node->private_list)) { | |
| list_lru_del_obj(&shadow_nodes, &node->private_list); | |
| __dec_node_page_state(page, WORKINGSET_NODES); | |
| } | |
| } | |
| } | |
| static unsigned long count_shadow_nodes(struct shrinker *shrinker, | |
| struct shrink_control *sc) | |
| { | |
| unsigned long max_nodes; | |
| unsigned long nodes; | |
| unsigned long pages; | |
| nodes = list_lru_shrink_count(&shadow_nodes, sc); | |
| if (!nodes) | |
| return SHRINK_EMPTY; | |
| /* | |
| * Approximate a reasonable limit for the nodes | |
| * containing shadow entries. We don't need to keep more | |
| * shadow entries than possible pages on the active list, | |
| * since refault distances bigger than that are dismissed. | |
| * | |
| * The size of the active list converges toward 100% of | |
| * overall page cache as memory grows, with only a tiny | |
| * inactive list. Assume the total cache size for that. | |
| * | |
| * Nodes might be sparsely populated, with only one shadow | |
| * entry in the extreme case. Obviously, we cannot keep one | |
| * node for every eligible shadow entry, so compromise on a | |
| * worst-case density of 1/8th. Below that, not all eligible | |
| * refaults can be detected anymore. | |
| * | |
| * On 64-bit with 7 xa_nodes per page and 64 slots | |
| * each, this will reclaim shadow entries when they consume | |
| * ~1.8% of available memory: | |
| * | |
| * PAGE_SIZE / xa_nodes / node_entries * 8 / PAGE_SIZE | |
| */ | |
| #ifdef CONFIG_MEMCG | |
| if (sc->memcg) { | |
| struct lruvec *lruvec; | |
| int i; | |
| mem_cgroup_flush_stats_ratelimited(sc->memcg); | |
| lruvec = mem_cgroup_lruvec(sc->memcg, NODE_DATA(sc->nid)); | |
| for (pages = 0, i = 0; i < NR_LRU_LISTS; i++) | |
| pages += lruvec_lru_size(lruvec, i, MAX_NR_ZONES - 1); | |
| pages += lruvec_page_state_local( | |
| lruvec, NR_SLAB_RECLAIMABLE_B) >> PAGE_SHIFT; | |
| pages += lruvec_page_state_local( | |
| lruvec, NR_SLAB_UNRECLAIMABLE_B) >> PAGE_SHIFT; | |
| } else | |
| #endif | |
| pages = node_present_pages(sc->nid); | |
| max_nodes = pages >> (XA_CHUNK_SHIFT - 3); | |
| if (nodes <= max_nodes) | |
| return 0; | |
| return nodes - max_nodes; | |
| } | |
| static enum lru_status shadow_lru_isolate(struct list_head *item, | |
| struct list_lru_one *lru, | |
| void *arg) __must_hold(lru->lock) | |
| { | |
| struct xa_node *node = container_of(item, struct xa_node, private_list); | |
| struct address_space *mapping; | |
| int ret; | |
| /* | |
| * Page cache insertions and deletions synchronously maintain | |
| * the shadow node LRU under the i_pages lock and the | |
| * &lru->lock. Because the page cache tree is emptied before | |
| * the inode can be destroyed, holding the &lru->lock pins any | |
| * address_space that has nodes on the LRU. | |
| * | |
| * We can then safely transition to the i_pages lock to | |
| * pin only the address_space of the particular node we want | |
| * to reclaim, take the node off-LRU, and drop the &lru->lock. | |
| */ | |
| mapping = container_of(node->array, struct address_space, i_pages); | |
| /* Coming from the list, invert the lock order */ | |
| if (!xa_trylock(&mapping->i_pages)) { | |
| spin_unlock_irq(&lru->lock); | |
| ret = LRU_RETRY; | |
| goto out; | |
| } | |
| /* For page cache we need to hold i_lock */ | |
| if (mapping->host != NULL) { | |
| if (!spin_trylock(&mapping->host->i_lock)) { | |
| xa_unlock(&mapping->i_pages); | |
| spin_unlock_irq(&lru->lock); | |
| ret = LRU_RETRY; | |
| goto out; | |
| } | |
| } | |
| list_lru_isolate(lru, item); | |
| __dec_node_page_state(virt_to_page(node), WORKINGSET_NODES); | |
| spin_unlock(&lru->lock); | |
| /* | |
| * The nodes should only contain one or more shadow entries, | |
| * no pages, so we expect to be able to remove them all and | |
| * delete and free the empty node afterwards. | |
| */ | |
| if (WARN_ON_ONCE(!node->nr_values)) | |
| goto out_invalid; | |
| if (WARN_ON_ONCE(node->count != node->nr_values)) | |
| goto out_invalid; | |
| xa_delete_node(node, workingset_update_node); | |
| mod_lruvec_kmem_state(node, WORKINGSET_NODERECLAIM, 1); | |
| out_invalid: | |
| xa_unlock_irq(&mapping->i_pages); | |
| if (mapping->host != NULL) { | |
| if (mapping_shrinkable(mapping)) | |
| inode_lru_list_add(mapping->host); | |
| spin_unlock(&mapping->host->i_lock); | |
| } | |
| ret = LRU_REMOVED_RETRY; | |
| out: | |
| cond_resched(); | |
| return ret; | |
| } | |
| static unsigned long scan_shadow_nodes(struct shrinker *shrinker, | |
| struct shrink_control *sc) | |
| { | |
| /* list_lru lock nests inside the IRQ-safe i_pages lock */ | |
| return list_lru_shrink_walk_irq(&shadow_nodes, sc, shadow_lru_isolate, | |
| NULL); | |
| } | |
| /* | |
| * Our list_lru->lock is IRQ-safe as it nests inside the IRQ-safe | |
| * i_pages lock. | |
| */ | |
| static struct lock_class_key shadow_nodes_key; | |
| static int __init workingset_init(void) | |
| { | |
| unsigned int timestamp_bits, timestamp_bits_anon; | |
| struct shrinker *workingset_shadow_shrinker; | |
| unsigned int max_order; | |
| int ret = -ENOMEM; | |
| BUILD_BUG_ON(BITS_PER_LONG < EVICTION_SHIFT); | |
| /* | |
| * Calculate the eviction bucket size to cover the longest | |
| * actionable refault distance, which is currently half of | |
| * memory (totalram_pages/2). However, memory hotplug may add | |
| * some more pages at runtime, so keep working with up to | |
| * double the initial memory by using totalram_pages as-is. | |
| */ | |
| timestamp_bits = BITS_PER_LONG - EVICTION_SHIFT; | |
| timestamp_bits_anon = BITS_PER_LONG - EVICTION_SHIFT_ANON; | |
| max_order = fls_long(totalram_pages() - 1); | |
| if (max_order > (BITS_PER_LONG - EVICTION_SHIFT)) | |
| bucket_order[WORKINGSET_FILE] = max_order - timestamp_bits; | |
| if (max_order > timestamp_bits_anon) | |
| bucket_order[WORKINGSET_ANON] = max_order - timestamp_bits_anon; | |
| pr_info("workingset: timestamp_bits=%d (anon: %d) max_order=%d bucket_order=%u (anon: %d)\n", | |
| timestamp_bits, timestamp_bits_anon, max_order, | |
| bucket_order[WORKINGSET_FILE], bucket_order[WORKINGSET_ANON]); | |
| workingset_shadow_shrinker = shrinker_alloc(SHRINKER_NUMA_AWARE | | |
| SHRINKER_MEMCG_AWARE, | |
| "mm-shadow"); | |
| if (!workingset_shadow_shrinker) | |
| goto err; | |
| ret = list_lru_init_memcg_key(&shadow_nodes, workingset_shadow_shrinker, | |
| &shadow_nodes_key); | |
| if (ret) | |
| goto err_list_lru; | |
| workingset_shadow_shrinker->count_objects = count_shadow_nodes; | |
| workingset_shadow_shrinker->scan_objects = scan_shadow_nodes; | |
| /* ->count reports only fully expendable nodes */ | |
| workingset_shadow_shrinker->seeks = 0; | |
| shrinker_register(workingset_shadow_shrinker); | |
| return 0; | |
| err_list_lru: | |
| shrinker_free(workingset_shadow_shrinker); | |
| err: | |
| return ret; | |
| } | |
| module_init(workingset_init); |