| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Common interface for implementing a memory balloon, including support | |
| * for migration of pages inflated in a memory balloon. | |
| * | |
| * Copyright (C) 2012, Red Hat, Inc. Rafael Aquini <aquini@redhat.com> | |
| */ | |
| #include <linux/mm.h> | |
| #include <linux/slab.h> | |
| #include <linux/export.h> | |
| #include <linux/balloon.h> | |
| /* | |
| * Lock protecting the balloon_dev_info of all devices. We don't really | |
| * expect more than one device. | |
| */ | |
| static DEFINE_SPINLOCK(balloon_pages_lock); | |
| /** | |
| * balloon_page_insert - insert a page into the balloon's page list and make | |
| * the page->private assignment accordingly. | |
| * @balloon : pointer to balloon device | |
| * @page : page to be assigned as a 'balloon page' | |
| * | |
| * Caller must ensure the balloon_pages_lock is held. | |
| */ | |
| static void balloon_page_insert(struct balloon_dev_info *balloon, | |
| struct page *page) | |
| { | |
| lockdep_assert_held(&balloon_pages_lock); | |
| __SetPageOffline(page); | |
| if (IS_ENABLED(CONFIG_BALLOON_MIGRATION)) { | |
| SetPageMovableOps(page); | |
| set_page_private(page, (unsigned long)balloon); | |
| } | |
| list_add(&page->lru, &balloon->pages); | |
| } | |
| /** | |
| * balloon_page_finalize - prepare a balloon page that was removed from the | |
| * balloon list for release to the page allocator | |
| * @page: page to be released to the page allocator | |
| * | |
| * Caller must ensure the balloon_pages_lock is held. | |
| */ | |
| static void balloon_page_finalize(struct page *page) | |
| { | |
| lockdep_assert_held(&balloon_pages_lock); | |
| if (IS_ENABLED(CONFIG_BALLOON_MIGRATION)) | |
| set_page_private(page, 0); | |
| /* PageOffline is sticky until the page is freed to the buddy. */ | |
| } | |
| static void balloon_page_enqueue_one(struct balloon_dev_info *b_dev_info, | |
| struct page *page) | |
| { | |
| balloon_page_insert(b_dev_info, page); | |
| if (b_dev_info->adjust_managed_page_count) | |
| adjust_managed_page_count(page, -1); | |
| __count_vm_event(BALLOON_INFLATE); | |
| inc_node_page_state(page, NR_BALLOON_PAGES); | |
| } | |
| /** | |
| * balloon_page_list_enqueue() - inserts a list of pages into the balloon page | |
| * list. | |
| * @b_dev_info: balloon device descriptor where we will insert a new page to | |
| * @pages: pages to enqueue - allocated using balloon_page_alloc. | |
| * | |
| * Driver must call this function to properly enqueue balloon pages before | |
| * definitively removing them from the guest system. | |
| * | |
| * Return: number of pages that were enqueued. | |
| */ | |
| size_t balloon_page_list_enqueue(struct balloon_dev_info *b_dev_info, | |
| struct list_head *pages) | |
| { | |
| struct page *page, *tmp; | |
| unsigned long flags; | |
| size_t n_pages = 0; | |
| spin_lock_irqsave(&balloon_pages_lock, flags); | |
| list_for_each_entry_safe(page, tmp, pages, lru) { | |
| list_del(&page->lru); | |
| balloon_page_enqueue_one(b_dev_info, page); | |
| n_pages++; | |
| } | |
| spin_unlock_irqrestore(&balloon_pages_lock, flags); | |
| return n_pages; | |
| } | |
| EXPORT_SYMBOL_GPL(balloon_page_list_enqueue); | |
| /** | |
| * balloon_page_list_dequeue() - removes pages from balloon's page list and | |
| * returns a list of the pages. | |
| * @b_dev_info: balloon device descriptor where we will grab a page from. | |
| * @pages: pointer to the list of pages that would be returned to the caller. | |
| * @n_req_pages: number of requested pages. | |
| * | |
| * Driver must call this function to properly de-allocate a previous enlisted | |
| * balloon pages before definitively releasing it back to the guest system. | |
| * This function tries to remove @n_req_pages from the ballooned pages and | |
| * return them to the caller in the @pages list. | |
| * | |
| * Note that this function may fail to dequeue some pages even if the balloon | |
| * isn't empty - since the page list can be temporarily empty due to compaction | |
| * of isolated pages. | |
| * | |
| * Return: number of pages that were added to the @pages list. | |
| */ | |
| size_t balloon_page_list_dequeue(struct balloon_dev_info *b_dev_info, | |
| struct list_head *pages, size_t n_req_pages) | |
| { | |
| struct page *page, *tmp; | |
| unsigned long flags; | |
| size_t n_pages = 0; | |
| spin_lock_irqsave(&balloon_pages_lock, flags); | |
| list_for_each_entry_safe(page, tmp, &b_dev_info->pages, lru) { | |
| if (n_pages == n_req_pages) | |
| break; | |
| list_del(&page->lru); | |
| if (b_dev_info->adjust_managed_page_count) | |
| adjust_managed_page_count(page, 1); | |
| balloon_page_finalize(page); | |
| __count_vm_event(BALLOON_DEFLATE); | |
| list_add(&page->lru, pages); | |
| dec_node_page_state(page, NR_BALLOON_PAGES); | |
| n_pages++; | |
| } | |
| spin_unlock_irqrestore(&balloon_pages_lock, flags); | |
| return n_pages; | |
| } | |
| EXPORT_SYMBOL_GPL(balloon_page_list_dequeue); | |
| /** | |
| * balloon_page_alloc - allocates a new page for insertion into the balloon | |
| * page list. | |
| * | |
| * Driver must call this function to properly allocate a new balloon page. | |
| * Driver must call balloon_page_enqueue before definitively removing the page | |
| * from the guest system. | |
| * | |
| * Return: struct page for the allocated page or NULL on allocation failure. | |
| */ | |
| struct page *balloon_page_alloc(void) | |
| { | |
| gfp_t gfp_flags = __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN; | |
| if (IS_ENABLED(CONFIG_BALLOON_MIGRATION)) | |
| gfp_flags |= GFP_HIGHUSER_MOVABLE; | |
| else | |
| gfp_flags |= GFP_HIGHUSER; | |
| return alloc_page(gfp_flags); | |
| } | |
| EXPORT_SYMBOL_GPL(balloon_page_alloc); | |
| /** | |
| * balloon_page_enqueue - inserts a new page into the balloon page list. | |
| * | |
| * @b_dev_info: balloon device descriptor where we will insert a new page | |
| * @page: new page to enqueue - allocated using balloon_page_alloc. | |
| * | |
| * Drivers must call this function to properly enqueue a new allocated balloon | |
| * page before definitively removing the page from the guest system. | |
| * | |
| * Drivers must not enqueue pages while page->lru is still in | |
| * use, and must not use page->lru until a page was unqueued again. | |
| */ | |
| void balloon_page_enqueue(struct balloon_dev_info *b_dev_info, | |
| struct page *page) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&balloon_pages_lock, flags); | |
| balloon_page_enqueue_one(b_dev_info, page); | |
| spin_unlock_irqrestore(&balloon_pages_lock, flags); | |
| } | |
| EXPORT_SYMBOL_GPL(balloon_page_enqueue); | |
| /** | |
| * balloon_page_dequeue - removes a page from balloon's page list and returns | |
| * its address to allow the driver to release the page. | |
| * @b_dev_info: balloon device descriptor where we will grab a page from. | |
| * | |
| * Driver must call this function to properly dequeue a previously enqueued page | |
| * before definitively releasing it back to the guest system. | |
| * | |
| * Caller must perform its own accounting to ensure that this | |
| * function is called only if some pages are actually enqueued. | |
| * | |
| * Note that this function may fail to dequeue some pages even if there are | |
| * some enqueued pages - since the page list can be temporarily empty due to | |
| * the compaction of isolated pages. | |
| * | |
| * TODO: remove the caller accounting requirements, and allow caller to wait | |
| * until all pages can be dequeued. | |
| * | |
| * Return: struct page for the dequeued page, or NULL if no page was dequeued. | |
| */ | |
| struct page *balloon_page_dequeue(struct balloon_dev_info *b_dev_info) | |
| { | |
| unsigned long flags; | |
| LIST_HEAD(pages); | |
| int n_pages; | |
| n_pages = balloon_page_list_dequeue(b_dev_info, &pages, 1); | |
| if (n_pages != 1) { | |
| /* | |
| * If we are unable to dequeue a balloon page because the page | |
| * list is empty and there are no isolated pages, then something | |
| * went out of track and some balloon pages are lost. | |
| * BUG() here, otherwise the balloon driver may get stuck in | |
| * an infinite loop while attempting to release all its pages. | |
| */ | |
| spin_lock_irqsave(&balloon_pages_lock, flags); | |
| if (unlikely(list_empty(&b_dev_info->pages) && | |
| !b_dev_info->isolated_pages)) | |
| BUG(); | |
| spin_unlock_irqrestore(&balloon_pages_lock, flags); | |
| return NULL; | |
| } | |
| return list_first_entry(&pages, struct page, lru); | |
| } | |
| EXPORT_SYMBOL_GPL(balloon_page_dequeue); | |
| #ifdef CONFIG_BALLOON_MIGRATION | |
| static struct balloon_dev_info *balloon_page_device(struct page *page) | |
| { | |
| return (struct balloon_dev_info *)page_private(page); | |
| } | |
| static bool balloon_page_isolate(struct page *page, isolate_mode_t mode) | |
| { | |
| struct balloon_dev_info *b_dev_info; | |
| unsigned long flags; | |
| spin_lock_irqsave(&balloon_pages_lock, flags); | |
| b_dev_info = balloon_page_device(page); | |
| if (!b_dev_info) { | |
| /* | |
| * The page already got deflated and removed from the | |
| * balloon list. | |
| */ | |
| spin_unlock_irqrestore(&balloon_pages_lock, flags); | |
| return false; | |
| } | |
| list_del(&page->lru); | |
| b_dev_info->isolated_pages++; | |
| spin_unlock_irqrestore(&balloon_pages_lock, flags); | |
| return true; | |
| } | |
| static void balloon_page_putback(struct page *page) | |
| { | |
| struct balloon_dev_info *b_dev_info = balloon_page_device(page); | |
| unsigned long flags; | |
| /* | |
| * When we isolated the page, the page was still inflated in a balloon | |
| * device. As isolated balloon pages cannot get deflated, we still have | |
| * a balloon device here. | |
| */ | |
| if (WARN_ON_ONCE(!b_dev_info)) | |
| return; | |
| spin_lock_irqsave(&balloon_pages_lock, flags); | |
| list_add(&page->lru, &b_dev_info->pages); | |
| b_dev_info->isolated_pages--; | |
| spin_unlock_irqrestore(&balloon_pages_lock, flags); | |
| } | |
| static int balloon_page_migrate(struct page *newpage, struct page *page, | |
| enum migrate_mode mode) | |
| { | |
| struct balloon_dev_info *b_dev_info = balloon_page_device(page); | |
| unsigned long flags; | |
| int rc; | |
| /* | |
| * When we isolated the page, the page was still inflated in a balloon | |
| * device. As isolated balloon pages cannot get deflated, we still have | |
| * a balloon device here. | |
| */ | |
| if (WARN_ON_ONCE(!b_dev_info)) | |
| return -EAGAIN; | |
| rc = b_dev_info->migratepage(b_dev_info, newpage, page, mode); | |
| if (rc < 0 && rc != -ENOENT) | |
| return rc; | |
| spin_lock_irqsave(&balloon_pages_lock, flags); | |
| if (!rc) { | |
| /* Insert the new page into the balloon list. */ | |
| get_page(newpage); | |
| balloon_page_insert(b_dev_info, newpage); | |
| __count_vm_event(BALLOON_MIGRATE); | |
| if (b_dev_info->adjust_managed_page_count && | |
| page_zone(page) != page_zone(newpage)) { | |
| /* | |
| * When we migrate a page to a different zone we | |
| * have to fixup the count of both involved zones. | |
| */ | |
| adjust_managed_page_count(page, 1); | |
| adjust_managed_page_count(newpage, -1); | |
| } | |
| } else { | |
| /* Old page was deflated but new page not inflated. */ | |
| __count_vm_event(BALLOON_DEFLATE); | |
| if (b_dev_info->adjust_managed_page_count) | |
| adjust_managed_page_count(page, 1); | |
| } | |
| b_dev_info->isolated_pages--; | |
| /* Free the now-deflated page we isolated in balloon_page_isolate(). */ | |
| balloon_page_finalize(page); | |
| spin_unlock_irqrestore(&balloon_pages_lock, flags); | |
| put_page(page); | |
| return 0; | |
| } | |
| static const struct movable_operations balloon_mops = { | |
| .migrate_page = balloon_page_migrate, | |
| .isolate_page = balloon_page_isolate, | |
| .putback_page = balloon_page_putback, | |
| }; | |
| static int __init balloon_init(void) | |
| { | |
| return set_movable_ops(&balloon_mops, PGTY_offline); | |
| } | |
| core_initcall(balloon_init); | |
| #endif /* CONFIG_BALLOON_MIGRATION */ |