Google Git Google Git
Sign in
zircon-guest/third_party/linux/refs/heads/linux-7.3.y/./include/soc/tegra/bpmp-abi.h
blob: 5c64b3e022110fde606b264580794a5f7d293df1 [file] [edit]
/* SPDX-License-Identifier: GPL-2.0 OR MIT */
/*
* Copyright (c) 2014-2025, NVIDIA CORPORATION. All rights reserved.
*/
#ifndef ABI_BPMP_ABI_H
#define ABI_BPMP_ABI_H
#if defined(LK) || defined(BPMP_ABI_HAVE_STDC)
#include <stddef.h>
#include <stdint.h>
#endif
#ifndef BPMP_ABI_PACKED
#ifdef __ABI_PACKED
#define BPMP_ABI_PACKED __ABI_PACKED
#else
#define BPMP_ABI_PACKED __attribute__((packed))
#endif
#endif
#ifdef NO_GCC_EXTENSIONS
#define BPMP_ABI_EMPTY char empty;
#define BPMP_ABI_EMPTY_ARRAY 1
#else
#define BPMP_ABI_EMPTY
#define BPMP_ABI_EMPTY_ARRAY 0
#endif
#ifndef BPMP_UNION_ANON
#ifdef __UNION_ANON
#define BPMP_UNION_ANON __UNION_ANON
#else
#define BPMP_UNION_ANON
#endif
#endif
/**
* @file
*/
/**
* @defgroup MRQ MRQ Messages
* @brief Messages sent to/from BPMP via IPC
* @{
* @defgroup MRQ_Format Message Format
* @defgroup MRQ_Codes Message Request (MRQ) Codes
* @defgroup MRQ_Payloads Message Payloads
* @defgroup Error_Codes Error Codes
* @}
*/
/**
* @addtogroup MRQ_Format
* @{
* The CPU requests the BPMP to perform a particular service by
* sending it an IVC frame containing a single MRQ message. An MRQ
* message consists of a @ref mrq_request followed by a payload whose
* format depends on mrq_request::mrq.
*
* The BPMP processes the data and replies with an IVC frame (on the
* same IVC channel) containing and MRQ response. An MRQ response
* consists of a @ref mrq_response followed by a payload whose format
* depends on the associated mrq_request::mrq.
*
* A well-defined subset of the MRQ messages that the CPU sends to the
* BPMP can lead to BPMP eventually sending an MRQ message to the
* CPU. For example, when the CPU uses an #MRQ_THERMAL message to set
* a thermal trip point, the BPMP may eventually send a single
* #MRQ_THERMAL message of its own to the CPU indicating that the trip
* point has been crossed.
* @}
*/
/**
* @ingroup MRQ_Format
*
* Request an answer from the peer.
* This should be set in mrq_request::flags for all requests targetted
* at BPMP. For requests originating in BPMP, this flag is optional except
* for messages targeting MCE, for which the field must be set.
* When this flag is not set, the remote peer must not send a response
* back.
*/
#define BPMP_MAIL_DO_ACK (1U << 0U)
/**
* @ingroup MRQ_Format
*
* Ring the sender's doorbell when responding. This should be set unless
* the sender wants to poll the underlying communications layer directly.
*
* An optional direction that can be specified in mrq_request::flags.
*/
#define BPMP_MAIL_RING_DB (1U << 1U)
/**
* @ingroup MRQ_Format
*
* This is set in mrq_request::flags for requests that have CRC present and
* correspondingly in mrq_response::flags for responses that have CRC present.
*/
#define BPMP_MAIL_CRC_PRESENT (1U << 2U)
/**
* @ingroup MRQ_Format
* @brief Header for an MRQ message
*
* Provides the MRQ number for the MRQ message: #mrq. The remainder of
* the MRQ message is a payload (immediately following the
* mrq_request) whose format depends on mrq.
*/
struct mrq_request {
/** @brief MRQ number of the request */
uint32_t mrq;
/**
* @brief 32bit word containing a number of fields as follows:
*
* struct {
* uint8_t options:4;
* uint8_t xid:4;
* uint8_t payload_length;
* uint16_t crc16;
* };
*
* **options** directions to the receiver and indicates CRC presence.
*
* #BPMP_MAIL_DO_ACK and #BPMP_MAIL_RING_DB see documentation of respective options.
* #BPMP_MAIL_CRC_PRESENT is supported on T234 and later platforms. It indicates the
* crc16, xid and length fields are present when set.
* Some platform configurations, especially when targeted to applications requiring
* functional safety, mandate this option being set or otherwise will respond with
* -#BPMP_EBADMSG and ignore the request.
*
* **xid** is a transaction ID.
*
* Only used when #BPMP_MAIL_CRC_PRESENT is set.
*
* **payload_length** of the message expressed in bytes without the size of this header.
* See tables below for minimum accepted payload lengths for each MRQ.
*
* Only used when #BPMP_MAIL_CRC_PRESENT is set.
*
* | MRQ | Sub-command | Minimum payload length
* | --------------------- | ------------------------------------ | ------------------------------------------------------- |
* | #MRQ_PING | - | 4 |
* | #MRQ_THREADED_PING | - | 4 |
* | #MRQ_RESET | any | 8 |
* | #MRQ_I2C | - | 12 + cmd_i2c_xfer_request.data_size |
* | #MRQ_CLK | #CMD_CLK_GET_RATE | 4 |
* | #MRQ_CLK | #CMD_CLK_SET_RATE | 16 |
* | #MRQ_CLK | #CMD_CLK_ROUND_RATE | 16 |
* | #MRQ_CLK | #CMD_CLK_GET_PARENT | 4 |
* | #MRQ_CLK | #CMD_CLK_SET_PARENT | 8 |
* | #MRQ_CLK | #CMD_CLK_ENABLE | 4 |
* | #MRQ_CLK | #CMD_CLK_DISABLE | 4 |
* | #MRQ_CLK | #CMD_CLK_IS_ENABLED | 4 |
* | #MRQ_CLK | #CMD_CLK_GET_ALL_INFO | 4 |
* | #MRQ_CLK | #CMD_CLK_GET_MAX_CLK_ID | 4 |
* | #MRQ_CLK | #CMD_CLK_GET_FMAX_AT_VMIN | 4 |
* | #MRQ_QUERY_ABI | - | 4 |
* | #MRQ_PG | #CMD_PG_QUERY_ABI | 12 |
* | #MRQ_PG | #CMD_PG_SET_STATE | 12 |
* | #MRQ_PG | #CMD_PG_GET_STATE | 8 |
* | #MRQ_PG | #CMD_PG_GET_NAME | 8 |
* | #MRQ_PG | #CMD_PG_GET_MAX_ID | 8 |
* | #MRQ_THERMAL | #CMD_THERMAL_QUERY_ABI | 8 |
* | #MRQ_THERMAL | #CMD_THERMAL_GET_TEMP | 8 |
* | #MRQ_THERMAL | #CMD_THERMAL_GET_NUM_ZONES | 4 |
* | #MRQ_THERMAL | #CMD_THERMAL_GET_THERMTRIP | 8 |
* | #MRQ_ABI_RATCHET | - | 2 |
* | #MRQ_EMC_DVFS_LATENCY | - | 8 |
* | #MRQ_QUERY_FW_TAG | - | 0 |
* | #MRQ_DEBUG | #CMD_DEBUG_OPEN_RO | 4 + length of cmd_debug_fopen_request.name |
* | #MRQ_DEBUG | #CMD_DEBUG_OPEN_WO | 4 + length of cmd_debug_fopen_request.name |
* | #MRQ_DEBUG | #CMD_DEBUG_READ | 8 |
* | #MRQ_DEBUG | #CMD_DEBUG_WRITE | 12 + cmd_debug_fwrite_request.datalen |
* | #MRQ_DEBUG | #CMD_DEBUG_CLOSE | 8 |
*
* @cond (bpmp_t186)
* The following additional MRQ is supported on T186 -platform:
*
* | MRQ | Sub-command | Minimum payload length |
* | --------------------- | ------------------------------------- | ------------------------------------- |
* | #MRQ_CPU_VHINT | - | 8 |
* | #MRQ_THERMAL | #CMD_THERMAL_SET_TRIP | 20 |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_QUERY_ABI | 8 |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_READ | 5 |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_WRITE | 5 + cmd_ringbuf_console_write_req.len |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_GET_FIFO | 4 |
* @endcond
*
* @cond (bpmp_t194)
* The following additional MRQs are supported on T194 -platform:
*
* | MRQ | Sub-command | Minimum payload length |
* | --------------------- | ------------------------------------- | ------------------------------------- |
* | #MRQ_CPU_NDIV_LIMITS | - | 4 |
* | #MRQ_STRAP | #STRAP_SET | 12 |
* | #MRQ_CPU_AUTO_CC3 | - | 4 |
* | #MRQ_EC | #CMD_EC_STATUS_EX_GET | 12 |
* | #MRQ_FMON | #CMD_FMON_GEAR_CLAMP | 16 |
* | #MRQ_FMON | #CMD_FMON_GEAR_FREE | 4 |
* | #MRQ_FMON | #CMD_FMON_GEAR_GET | 4 |
* | #MRQ_FMON | #CMD_FMON_FAULT_STS_GET | 8 |
* | #MRQ_THERMAL | #CMD_THERMAL_SET_TRIP | 20 |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_QUERY_ABI | 8 |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_READ | 5 |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_WRITE | 5 + cmd_ringbuf_console_write_req.len |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_GET_FIFO | 4 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | 24 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_STATUS | 4 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT | 5 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_CONTROLLER_STATE | 6 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF | 5 |
* @endcond
*
* @cond (bpmp_safe && bpmp_t234)
* The following additional MRQ is supported on functional-safety
* builds for the T234 platform:
*
* | MRQ | Sub-command | Minimum payload length |
* | --------------------- | ------------------------------------- | ------------------------------------- |
* | #MRQ_CPU_NDIV_LIMITS | - | 4 |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_QUERY_ABI | 8 |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_READ | 5 |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_WRITE | 5 + cmd_ringbuf_console_write_req.len |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_GET_FIFO | 4 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | 24 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_STATUS | 4 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT | 5 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_CONTROLLER_STATE | 6 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF | 5 |
* | #MRQ_FMON | #CMD_FMON_GEAR_CLAMP | 16 |
* | #MRQ_FMON | #CMD_FMON_GEAR_FREE | 4 |
* | #MRQ_FMON | #CMD_FMON_GEAR_GET | 4 |
* | #MRQ_FMON | #CMD_FMON_FAULT_STS_GET | 8 |
* | #MRQ_EMC_DVFS_EMCHUB | - | 8 |
* | #MRQ_EMC_DISP_RFL | - | 4 |
*
* @endcond
*
* @cond (!bpmp_safe && bpmp_t234)
*
* The following additional MRQs are supported on non-functional-safety
* builds for the T234 and T238 -platforms:
*
* | MRQ | Sub-command | Minimum payload length |
* | --------------------- | ------------------------------------- | --------------------------------------------------- |
* | #MRQ_CPU_NDIV_LIMITS | - | 4 |
* | #MRQ_STRAP | #STRAP_SET | 12 |
* | #MRQ_THERMAL | #CMD_THERMAL_SET_TRIP | 20 |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_QUERY_ABI | 8 |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_READ | 5 |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_WRITE | 5 + cmd_ringbuf_console_write_req.len |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_GET_FIFO | 4 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | 24 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_STATUS | 4 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT | 5 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_CONTROLLER_STATE | 6 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF | 5 |
* | #MRQ_FMON | #CMD_FMON_GEAR_CLAMP | 16 |
* | #MRQ_FMON | #CMD_FMON_GEAR_FREE | 4 |
* | #MRQ_FMON | #CMD_FMON_GEAR_GET | 4 |
* | #MRQ_FMON | #CMD_FMON_FAULT_STS_GET | 8 |
* | #MRQ_EMC_DVFS_EMCHUB | - | 8 |
* | #MRQ_EMC_DISP_RFL | - | 4 |
* | #MRQ_BWMGR | #CMD_BWMGR_QUERY_ABI | 8 |
* | #MRQ_BWMGR | #CMD_BWMGR_CALC_RATE | 8 + 8 * cmd_bwmgr_calc_rate_request.num_iso_clients |
* | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_QUERY_ABI | 8 |
* | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_CALCULATE_LA | 16 |
* | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_SET_LA | 16 |
* | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_GET_MAX_BW | 8 |
* | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_QUERY_ABI | 8 |
* | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_CALC_AND_SET | 16 |
* | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_CAP_SET | 8 |
* | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_GET_LAST_REQUEST | 9 |
* | #MRQ_OC_STATUS | - | 0 |
* @endcond
*
* @cond bpmp_t238
* The following additional MRQs are supported on T238 platform:
*
* | MRQ | Sub-command | Minimum payload length |
* | --------------------- | ------------------------------------- | --------------------------------------------------- |
* | #MRQ_CPU_NDIV_LIMITS | - | 4 |
* | #MRQ_STRAP | #STRAP_SET | 12 |
* | #MRQ_THERMAL | #CMD_THERMAL_SET_TRIP | 20 |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_QUERY_ABI | 8 |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_READ | 5 |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_WRITE | 5 + cmd_ringbuf_console_write_req.len |
* | #MRQ_RINGBUF_CONSOLE | #CMD_RINGBUF_CONSOLE_GET_FIFO | 4 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | 24 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_STATUS | 4 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT | 5 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_CONTROLLER_STATE | 6 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF | 5 |
* | #MRQ_FMON | #CMD_FMON_GEAR_CLAMP | 16 |
* | #MRQ_FMON | #CMD_FMON_GEAR_FREE | 4 |
* | #MRQ_FMON | #CMD_FMON_GEAR_GET | 4 |
* | #MRQ_FMON | #CMD_FMON_FAULT_STS_GET | 8 |
* | #MRQ_EMC_DVFS_EMCHUB | - | 8 |
* | #MRQ_EMC_DISP_RFL | - | 4 |
* | #MRQ_BWMGR | #CMD_BWMGR_QUERY_ABI | 8 |
* | #MRQ_BWMGR | #CMD_BWMGR_CALC_RATE | 8 + 8 * cmd_bwmgr_calc_rate_request.num_iso_clients |
* | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_QUERY_ABI | 8 |
* | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_CALCULATE_LA | 16 |
* | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_SET_LA | 16 |
* | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_GET_MAX_BW | 8 |
* | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_QUERY_ABI | 8 |
* | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_CALC_AND_SET | 16 |
* | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_CAP_SET | 8 |
* | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_GET_LAST_REQUEST | 9 |
* | #MRQ_OC_STATUS | - | 0 |
* | #MRQ_THROTTLE | #CMD_THROTTLE_SET_OC_CONFIG | 5 |
* @endcond
*
* @cond (bpmp_th500)
* The following additional MRQs are supported on TH500 -platform:
*
* | MRQ | Sub-command | Minimum payload length |
* | -------------------- | ------------------------------------- | ---------------------- |
* | #MRQ_CPU_NDIV_LIMITS | - | 4 |
* | #MRQ_THERMAL | #CMD_THERMAL_SET_TRIP | 20 |
* | #MRQ_STRAP | #STRAP_SET | 12 |
* | #MRQ_SHUTDOWN | - | 4 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_CONTROL | 24 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_LANE_MARGIN_STATUS | 4 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT | 5 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_CONTROLLER_STATE | 6 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF | 5 |
* | #MRQ_UPHY | #CMD_UPHY_PCIE_CONFIG_VDM | 3 |
* | #MRQ_TELEMETRY | - | 8 |
* | #MRQ_PWR_LIMIT | #CMD_PWR_LIMIT_QUERY_ABI | 8 |
* | #MRQ_PWR_LIMIT | #CMD_PWR_LIMIT_SET | 20 |
* | #MRQ_PWR_LIMIT | #CMD_PWR_LIMIT_GET | 16 |
* | #MRQ_PWR_LIMIT | #CMD_PWR_LIMIT_CURR_CAP | 8 |
* | #MRQ_GEARS | - | 0 |
* | #MRQ_C2C | #CMD_C2C_QUERY_ABI | 8 |
* | #MRQ_C2C | #CMD_C2C_START_INITIALIZATION | 5 |
* | #MRQ_C2C | #CMD_C2C_GET_STATUS | 4 |
* | #MRQ_C2C | #CMD_C2C_HOTRESET_PREP | 5 |
* | #MRQ_C2C | #CMD_C2C_START_HOTRESET | 5 |
* | #MRQ_THROTTLE | #CMD_THROTTLE_QUERY_ABI | 4 |
* | #MRQ_THROTTLE | #CMD_THROTTLE_GET_CHIPTHROT_STATUS | 4 |
* | #MRQ_PWRMODEL | #CMD_PWRMODEL_QUERY_ABI | 8 |
* | #MRQ_PWRMODEL | #CMD_PWRMODEL_PWR_GET | 16 |
* | #MRQ_PWR_CNTRL | #CMD_PWR_CNTRL_QUERY_ABI | 8 |
* | #MRQ_PWR_CNTRL | #CMD_PWR_CNTRL_BYPASS_SET | 12 |
* | #MRQ_PWR_CNTRL | #CMD_PWR_CNTRL_BYPASS_GET | 8 |
* @endcond
*
* @cond (bpmp_tb500)
* The following additional MRQs are supported on TB500 -platform:
*
* | MRQ | Sub-command | Minimum payload length |
* | -------------------- | ---------------------------------------- | ---------------------- |
* | #MRQ_PWR_LIMIT | #CMD_PWR_LIMIT_QUERY_ABI | 8 |
* | #MRQ_PWR_LIMIT | #CMD_PWR_LIMIT_SET | 20 |
* | #MRQ_PWR_LIMIT | #CMD_PWR_LIMIT_GET | 16 |
* | #MRQ_PWR_LIMIT | #CMD_PWR_LIMIT_CURR_CAP | 8 |
* | #MRQ_TELEMETRY_EX | #CMD_TELEMETRY_EX_QUERY_ABI | 8 |
* | #MRQ_TELEMETRY_EX | #CMD_TELEMETRY_EX_BASE_SZ_GET | 12 |
* | #MRQ_THROTTLE | #CMD_THROTTLE_GET_CHIPTHROT_STATUS | 4 |
* | #MRQ_C2C | #CMD_C2C_QUERY_ABI | 8 |
* | #MRQ_C2C | #CMD_C2C_START_INITIALIZATION | 5 |
* | #MRQ_C2C | #CMD_C2C_GET_STATUS | 4 |
* | #MRQ_C2C | #CMD_C2C_HOTRESET_PREP | 5 |
* | #MRQ_C2C | #CMD_C2C_START_HOTRESET | 5 |
* | MRQ_HWPM | CMD_HWPM_QUERY_ABI | 4 |
* | MRQ_HWPM | CMD_HWPM_IPMU_SET_TRIGGERS | 120 |
* | MRQ_HWPM | CMD_HWPM_IPMU_SET_PAYLOADS_SHIFTS | 120 |
* | MRQ_HWPM | CMD_HWPM_IPMU_GET_MAX_PAYLOADS | 0 |
* | MRQ_HWPM | CMD_HWPM_NVTHERM_SET_SAMPLE_RATE | 4 |
* | MRQ_HWPM | CMD_HWPM_NVTHERM_SET_BUBBLE_INTERVAL | 4 |
* | MRQ_HWPM | CMD_HWPM_NVTHERM_SET_FLEX_CHANNELS | 120 |
* | MRQ_HWPM | CMD_HWPM_ISENSE_GET_SENSOR_NAME | 4 |
* | MRQ_HWPM | CMD_HWPM_ISENSE_GET_SENSOR_CHANNEL | 4 |
* | MRQ_HWPM | CMD_HWPM_ISENSE_GET_SENSOR_SCALE_FACTOR | 4 |
* | MRQ_HWPM | CMD_HWPM_ISENSE_GET_SENSOR_OFFSET | 4 |
* | MRQ_HWPM | CMD_HWPM_ISENSE_GET_SUM_BLOCK_NAME | 4 |
* | MRQ_HWPM | CMD_HWPM_ISENSE_GET_SUM_BLOCK_INPUTS | 4 |
* | MRQ_DVFS | CMD_DVFS_QUERY_ABI | 4 |
* | MRQ_DVFS | CMD_DVFS_SET_CTRL_STATE | 8 |
* | MRQ_DVFS | CMD_DVFS_SET_MGR_STATE | 8 |
* | MRQ_PPP_PROFILE | CMD_PPP_PROFILE_QUERY_ABI | 8 |
* | MRQ_PPP_PROFILE | CMD_PPP_PROFILE_QUERY_MASKS | 8 |
* | MRQ_PPP_PROFILE | CMD_PPP_CORE_QUERY_CPU_MASK | 8 |
* | MRQ_PPP_PROFILE | CMD_PPP_AVAILABLE_QUERY | 4 |
* @endcond
*
* @cond (bpmp_safe && bpmp_t264)
* The following additional MRQ is supported on functional-safety
* builds for the T264 platform:
*
* | MRQ | Sub-command | Minimum payload length |
* | -------------------- | --------------------------------- | ---------------------- |
* | #MRQ_CPU_NDIV_LIMITS | - | 4 |
* | #MRQ_STRAP | #STRAP_SET | 12 |
* | #MRQ_SHUTDOWN | - | 4 |
* | #MRQ_FMON | #CMD_FMON_GEAR_CLAMP | 16 |
* | #MRQ_FMON | #CMD_FMON_GEAR_FREE | 4 |
* | #MRQ_FMON | #CMD_FMON_GEAR_GET | 4 |
* | #MRQ_FMON | #CMD_FMON_FAULT_STS_GET | 8 |
* | #MRQ_PCIE | #CMD_PCIE_EP_CONTROLLER_INIT | 5 |
* | #MRQ_PCIE | #CMD_PCIE_EP_CONTROLLER_OFF | 5 |
* | #MRQ_CR7 | #CMD_CR7_ENTRY | 12 |
* | #MRQ_CR7 | #CMD_CR7_EXIT | 12 |
* | #MRQ_SLC | #CMD_SLC_QUERY_ABI | 8 |
* | #MRQ_SLC | #CMD_SLC_BYPASS_SET | 8 |
* | #MRQ_SLC | #CMD_SLC_BYPASS_GET | 4 |
* @endcond
*
* @cond (!bpmp_safe && bpmp_t264)
* The following additional MRQs are supported on non-functional-safety
* builds for the T264 -platform:
*
* | MRQ | Sub-command | Minimum payload length |
* | -------------------- | --------------------------------- | ---------------------- |
* | #MRQ_CPU_NDIV_LIMITS | - | 4 |
* | #MRQ_STRAP | #STRAP_SET | 12 |
* | #MRQ_SHUTDOWN | - | 4 |
* | #MRQ_FMON | #CMD_FMON_GEAR_CLAMP | 16 |
* | #MRQ_FMON | #CMD_FMON_GEAR_FREE | 4 |
* | #MRQ_FMON | #CMD_FMON_GEAR_GET | 4 |
* | #MRQ_FMON | #CMD_FMON_FAULT_STS_GET | 8 |
* | #MRQ_OC_STATUS | - | 0 |
* | #MRQ_PCIE | #CMD_PCIE_EP_CONTROLLER_INIT | 5 |
* | #MRQ_PCIE | #CMD_PCIE_EP_CONTROLLER_OFF | 5 |
* | #MRQ_PCIE | #CMD_PCIE_RP_CONTROLLER_OFF | 5 |
* | #MRQ_CR7 | #CMD_CR7_ENTRY | 12 |
* | #MRQ_CR7 | #CMD_CR7_EXIT | 12 |
* | #MRQ_SLC | #CMD_SLC_QUERY_ABI | 8 |
* | #MRQ_SLC | #CMD_SLC_BYPASS_SET | 8 |
* | #MRQ_SLC | #CMD_SLC_BYPASS_GET | 4 |
* | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_QUERY_ABI | 8 |
* | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_CALCULATE_LA | 16 |
* | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_SET_LA | 16 |
* | #MRQ_ISO_CLIENT | #CMD_ISO_CLIENT_GET_MAX_BW | 8 |
* | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_QUERY_ABI | 8 |
* | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_CALC_AND_SET | 16 |
* | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_CAP_SET | 8 |
* | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_CURR_AVAILABLE_BW | 8 |
* | #MRQ_BWMGR_INT | #CMD_BWMGR_INT_GET_LAST_REQUEST | 9 |
* @endcond
*
* **crc16**
*
* CRC16 using polynomial x^16 + x^14 + x^12 + x^11 + x^8 + x^5 + x^4 + x^2 + 1
* and initialization value 0x4657. The CRC is calculated over all bytes of the message
* including this header. However the crc16 field is considered to be set to 0 when
* calculating the CRC. Only used when #BPMP_MAIL_CRC_PRESENT is set. If
* #BPMP_MAIL_CRC_PRESENT is set and this field does not match the CRC as
* calculated by BPMP, -#BPMP_EBADMSG will be returned and the request will
* be ignored. See code snippet below on how to calculate the CRC.
*
* @code
* uint16_t calc_crc_digest(uint16_t crc, uint8_t *data, size_t size)
* {
* for (size_t i = 0; i < size; i++) {
* crc ^= data[i] << 8;
* for (size_t j = 0; j < 8; j++) {
* if ((crc & 0x8000) == 0x8000) {
* crc = (crc << 1) ^ 0xAC9A;
* } else {
* crc = (crc << 1);
* }
* }
* }
* return crc;
* }
*
* uint16_t calc_crc(uint8_t *data, size_t size)
* {
* return calc_crc_digest(0x4657, data, size);
* }
* @endcode
*/
uint32_t flags;
} BPMP_ABI_PACKED;
/**
* @ingroup MRQ_Format
* @brief Header for an MRQ response
*
* Provides an error code for the associated MRQ message. The
* remainder of the MRQ response is a payload (immediately following
* the mrq_response) whose format depends on the associated
* mrq_request::mrq
*/
struct mrq_response {
/** @brief Error code for the MRQ request itself */
int32_t err;
/**
* @brief 32bit word containing a number of fields as follows:
*
* struct {
* uint8_t options:4;
* uint8_t xid:4;
* uint8_t payload_length;
* uint16_t crc16;
* };
*
* **options** indicates CRC presence.
*
* #BPMP_MAIL_CRC_PRESENT is supported on T234 and later platforms and
* indicates the crc16 related fields are present when set.
*
* **xid** is the transaction ID as sent by the requestor.
*
* **length** of the message expressed in bytes without the size of this header.
* Note: For DMCE communication, this field expresses the length as a multiple of 4 bytes
* rather than bytes.
*
* **crc16**
*
* CRC16 using polynomial x^16 + x^14 + x^12 + x^11 + x^8 + x^5 + x^4 + x^2 + 1
* and initialization value 0x4657. The CRC is calculated over all bytes of the message
* including this header. However the crc16 field is considered to be set to 0 when
* calculating the CRC. Only used when #BPMP_MAIL_CRC_PRESENT is set.
*/
uint32_t flags;
} BPMP_ABI_PACKED;
/**
* @ingroup MRQ_Format
* Minimum needed size for an IPC message buffer
*/
#define MSG_MIN_SZ 128U
/**
* @ingroup MRQ_Format
* Minimum size guaranteed for data in an IPC message buffer
*/
#define MSG_DATA_MIN_SZ 120U
/**
* @ingroup MRQ_Codes
* @name Legal MRQ codes
* These are the legal values for mrq_request::mrq
* @{
*/
#define MRQ_PING 0U
#define MRQ_QUERY_TAG 1U
#define MRQ_THREADED_PING 9U
#define MRQ_DEBUGFS 19U
#define MRQ_RESET 20U
#define MRQ_I2C 21U
#define MRQ_CLK 22U
#define MRQ_QUERY_ABI 23U
#define MRQ_THERMAL 27U
#define MRQ_CPU_VHINT 28U
#define MRQ_ABI_RATCHET 29U
#define MRQ_EMC_DVFS_LATENCY 31U
//adoc: tag::bpmp_dmce_mrq_shutdown[]
#define MRQ_SHUTDOWN 49U
//adoc: end::bpmp_dmce_mrq_shutdown[]
#define MRQ_RINGBUF_CONSOLE 65U
#define MRQ_PG 66U
#define MRQ_CPU_NDIV_LIMITS 67U
#define MRQ_STRAP 68U
#define MRQ_UPHY 69U
#define MRQ_CPU_AUTO_CC3 70U
#define MRQ_QUERY_FW_TAG 71U
#define MRQ_FMON 72U
#define MRQ_EC 73U
#define MRQ_DEBUG 75U
#define MRQ_EMC_DVFS_EMCHUB 76U
#define MRQ_BWMGR 77U
#define MRQ_ISO_CLIENT 78U
#define MRQ_EMC_DISP_RFL 79U
#define MRQ_TELEMETRY 80U
#define MRQ_PWR_LIMIT 81U
#define MRQ_GEARS 82U
#define MRQ_BWMGR_INT 83U
#define MRQ_OC_STATUS 84U
#define MRQ_C2C 85U
#define MRQ_THROTTLE 86U
#define MRQ_PWRMODEL 87U
#define MRQ_PCIE 88U
#define MRQ_PWR_CNTRL 89U
#define MRQ_CR7 90U
#define MRQ_SLC 91U
#define MRQ_TELEMETRY_EX 92U
#define MRQ_HWPM 93U
#define MRQ_DVFS 94U
#define MRQ_PPP_PROFILE 95U
/**
* @brief Maximum MRQ code to be sent by CPU software to
* BPMP. Subject to change in future
*/
#define MAX_CPU_MRQ_ID 95U
/** @} */
/**
* @addtogroup MRQ_Payloads
* @{
* @defgroup Ping Ping
* @defgroup Query_Tag Query Tag
* @defgroup Debugfs Debug File System
* @defgroup Reset Reset
* @defgroup I2C I2C
* @defgroup Clocks Clocks
* @defgroup ABI_info ABI Info
* @defgroup Powergating Power Gating
* @defgroup Thermal Thermal
* @defgroup Throttle Throttle
* @defgroup OC_status OC status
* @defgroup Vhint CPU Voltage hint
* @defgroup EMC EMC
* @defgroup BWMGR BWMGR
* @defgroup ISO_CLIENT ISO_CLIENT
* @defgroup CPU NDIV Limits
* @defgroup RingbufConsole Ring Buffer Console
* @defgroup Strap Straps
* @defgroup UPHY UPHY
* @defgroup CC3 Auto-CC3
* @defgroup FMON FMON
* @defgroup EC EC
* @defgroup Telemetry Telemetry
* @defgroup Pwrlimit PWR_LIMIT
* @defgroup Gears Gears
* @defgroup Shutdown Shutdown
* @defgroup BWMGR_INT Bandwidth Manager Integrated
* @defgroup C2C C2C
* @defgroup Pwrmodel Power Model
* @defgroup Pwrcntrl Power Controllers
* @cond bpmp_t264
* * @defgroup PCIE PCIE
* * @defgroup CR7 CR7
* * @defgroup Slc Slc
* @endcond
* @cond bpmp_tb500
* * @defgroup Telemetry_ex Telemetry Expanded
* * @defgroup HWPM Hardware Performance Monitoring
* * @defgroup DVFS Dynamic Voltage and Frequency Scaling
* * @defgroup PPP power/performance profiles
* @endcond
* @} MRQ_Payloads
*/
/**
* @ingroup MRQ_Codes
* @def MRQ_PING
* @brief A simple ping
*
* * Initiators: Any
* * Targets: Any
* * Request Payload: @ref mrq_ping_request
* * Response Payload: @ref mrq_ping_response
*
* @ingroup MRQ_Codes
* @def MRQ_THREADED_PING
* @brief A deeper ping
*
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_ping_request
* * Response Payload: @ref mrq_ping_response
*
* Behavior is equivalent to a simple #MRQ_PING except that BPMP
* responds from a thread context (providing a slightly more robust
* sign of life).
*
*/
/**
* @ingroup Ping
* @brief Request with #MRQ_PING
*
* Used by the sender of an #MRQ_PING message to request a pong from
* recipient. The response from the recipient is computed based on the
* mrq_ping_request::challenge -value.
*/
struct mrq_ping_request {
/** @brief Arbitrarily chosen value */
uint32_t challenge;
} BPMP_ABI_PACKED;
/**
* @ingroup Ping
* @brief Response to #MRQ_PING
*
* Sent in response to an #MRQ_PING message. #reply should be the
* mrq_ping_request challenge left shifted by 1 with the carry-bit
* dropped.
*
*/
struct mrq_ping_response {
/** @brief Response to the MRQ_PING challege */
uint32_t reply;
} BPMP_ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_QUERY_TAG
* @brief Query BPMP firmware's tag (i.e. unique identifer)
*
* @deprecated Use #MRQ_QUERY_FW_TAG instead.
*
* @details
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_query_tag_request
* * Response Payload: N/A
*
*/
/**
* @ingroup Query_Tag
* @brief Request with #MRQ_QUERY_TAG
*
* @deprecated This structure will be removed in future version.
* Use #MRQ_QUERY_FW_TAG instead.
*/
struct mrq_query_tag_request {
/** @brief Base address to store the firmware tag */
uint32_t addr;
} BPMP_ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_QUERY_FW_TAG
* @brief Query BPMP firmware's tag (i.e. unique identifier)
*
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: N/A
* * Response Payload: @ref mrq_query_fw_tag_response
*
*/
/**
* @ingroup Query_Tag
* @brief Response to #MRQ_QUERY_FW_TAG
*
* Sent in response to #MRQ_QUERY_FW_TAG message. #tag contains the unique
* identifier for the version of firmware issuing the reply.
*/
struct mrq_query_fw_tag_response {
/** @brief Array to store tag information */
uint8_t tag[32];
} BPMP_ABI_PACKED;
/** @private */
struct mrq_threaded_ping_request {
uint32_t challenge;
} BPMP_ABI_PACKED;
/** @private */
struct mrq_threaded_ping_response {
uint32_t reply;
} BPMP_ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_DEBUGFS
* @brief Interact with BPMP's debugfs file nodes
*
* @deprecated Use #MRQ_DEBUG instead.
*
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_debugfs_request
* * Response Payload: @ref mrq_debugfs_response
*/
/**
* @addtogroup Debugfs
* @{
*
* The BPMP firmware implements a pseudo-filesystem called
* debugfs. Any driver within the firmware may register with debugfs
* to expose an arbitrary set of "files" in the filesystem. When
* software on the CPU writes to a debugfs file, debugfs passes the
* written data to a callback provided by the driver. When software on
* the CPU reads a debugfs file, debugfs queries the driver for the
* data to return to the CPU. The intention of the debugfs filesystem
* is to provide information useful for debugging the system at
* runtime.
*
* @note The files exposed via debugfs are not part of the
* BPMP firmware's ABI. debugfs files may be added or removed in any
* given version of the firmware. Typically the semantics of a debugfs
* file are consistent from version to version but even that is not
* guaranteed.
*
* @}
*/
/** @ingroup Debugfs */
enum mrq_debugfs_commands {
/** @brief Perform read */
CMD_DEBUGFS_READ = 1,
/** @brief Perform write */
CMD_DEBUGFS_WRITE = 2,
/** @brief Perform dumping directory */
CMD_DEBUGFS_DUMPDIR = 3,
/** @brief Not a command */
CMD_DEBUGFS_MAX
};
/**
* @ingroup Debugfs
* @brief Parameters for CMD_DEBUGFS_READ/WRITE command
*/
struct cmd_debugfs_fileop_request {
/** @brief Physical address pointing at filename */
uint32_t fnameaddr;
/** @brief Length in bytes of filename buffer */
uint32_t fnamelen;
/** @brief Physical address pointing to data buffer */
uint32_t dataaddr;
/** @brief Length in bytes of data buffer */
uint32_t datalen;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Parameters for CMD_DEBUGFS_READ/WRITE command
*/
struct cmd_debugfs_dumpdir_request {
/** @brief Physical address pointing to data buffer */
uint32_t dataaddr;
/** @brief Length in bytes of data buffer */
uint32_t datalen;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Response data for CMD_DEBUGFS_READ/WRITE command
*/
struct cmd_debugfs_fileop_response {
/** @brief Always 0 */
uint32_t reserved;
/** @brief Number of bytes read from or written to data buffer */
uint32_t nbytes;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Response data for CMD_DEBUGFS_DUMPDIR command
*/
struct cmd_debugfs_dumpdir_response {
/** @brief Always 0 */
uint32_t reserved;
/** @brief Number of bytes read from or written to data buffer */
uint32_t nbytes;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Request with #MRQ_DEBUG.
*
* The sender of an MRQ_DEBUG message uses #cmd to specify a debugfs
* command to execute. Legal commands are the values of @ref
* mrq_debugfs_commands. Each command requires a specific additional
* payload of data.
*
* |command |payload|
* |-------------------|-------|
* |CMD_DEBUGFS_READ |fop |
* |CMD_DEBUGFS_WRITE |fop |
* |CMD_DEBUGFS_DUMPDIR|dumpdir|
*/
struct mrq_debugfs_request {
/** @brief Sub-command (@ref mrq_debugfs_commands) */
uint32_t cmd;
union {
struct cmd_debugfs_fileop_request fop;
struct cmd_debugfs_dumpdir_request dumpdir;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
*/
struct mrq_debugfs_response {
/** @brief Always 0 */
int32_t reserved;
union {
/** @brief Response data for CMD_DEBUGFS_READ OR
* CMD_DEBUGFS_WRITE command
*/
struct cmd_debugfs_fileop_response fop;
/** @brief Response data for CMD_DEBUGFS_DUMPDIR command */
struct cmd_debugfs_dumpdir_response dumpdir;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @addtogroup Debugfs
* @{
*/
#define DEBUGFS_S_ISDIR (1 << 9)
#define DEBUGFS_S_IRUSR (1 << 8)
#define DEBUGFS_S_IWUSR (1 << 7)
/** @} Debugfs */
/**
* @ingroup MRQ_Codes
* @def MRQ_DEBUG
* @brief Interact with BPMP-FW debugfs file nodes. Use message payload
* for exchanging data. This is functionally equivalent to
* the deprecated MRQ_DEBUGFS but the way in which data is exchanged is
* different. When software running on CPU tries to read a debugfs file,
* the file path and read data will be stored in message payload.
* Since the message payload size is limited, a debugfs file
* transaction might require multiple frames of data exchanged
* between BPMP and CPU until the transaction completes.
*
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_debug_request
* * Response Payload: @ref mrq_debug_response
*/
/** @ingroup Debugfs */
enum mrq_debug_commands {
/**
* @brief Open file represented by the path in
* cmd_debug_fopen_request::name for read operation
*/
CMD_DEBUG_OPEN_RO = 0,
/**
* @brief Open file represented by the path in
* cmd_debug_fopen_request::name for write operation
*/
CMD_DEBUG_OPEN_WO = 1,
/**
* @brief Perform read on a previously opened file handle represented
* by the cmd_debug_fread_request::fd -value.
*/
CMD_DEBUG_READ = 2,
/**
* @brief Perform write on a previously opened file handle represented
* by the cmd_debug_fwrite_request::fd -value.
*/
CMD_DEBUG_WRITE = 3,
/**
* @brief Close previously opened file handle.
*/
CMD_DEBUG_CLOSE = 4,
/**
* @brief Not a command, represents maximum number of supported
* sub-commands
*/
CMD_DEBUG_MAX
};
/**
* @ingroup Debugfs
* @brief Maximum number of files that can be open at a given time
*/
#define DEBUG_MAX_OPEN_FILES 1
/**
* @ingroup Debugfs
* @brief Maximum size of null-terminated file name string in bytes.
* Value is derived from memory available in message payload while
* using @ref cmd_debug_fopen_request
* Value 4 corresponds to size of @ref mrq_debug_commands
* in @ref mrq_debug_request.
* 120 - 4 dbg_cmd(32bit) = 116
*/
#define DEBUG_FNAME_MAX_SZ (MSG_DATA_MIN_SZ - 4)
/**
* @ingroup Debugfs
* @brief Parameters for #CMD_DEBUG_OPEN_RO and #CMD_DEBUG_OPEN_WO -commands
*/
struct cmd_debug_fopen_request {
/**
* @brief File name - Null-terminated string with maximum
* length including the terminator defined by the
* #DEBUG_FNAME_MAX_SZ -preprocessor constant.
*/
char name[DEBUG_FNAME_MAX_SZ];
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Response data for #CMD_DEBUG_OPEN_RO and #CMD_DEBUG_OPEN_WO commands
*/
struct cmd_debug_fopen_response {
/** @brief Identifier for file access */
uint32_t fd;
/** @brief Data length. File data size for READ command.
* Maximum allowed length for WRITE command
*/
uint32_t datalen;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Parameters for #CMD_DEBUG_READ command
*/
struct cmd_debug_fread_request {
/**
* @brief File access identifier received in response
* to #CMD_DEBUG_OPEN_RO request
*/
uint32_t fd;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Maximum size of read data in bytes.
* Value is derived from memory available in message payload while
* using @ref cmd_debug_fread_response.
*/
#define DEBUG_READ_MAX_SZ (MSG_DATA_MIN_SZ - 4)
/**
* @ingroup Debugfs
* @brief Response data for #CMD_DEBUG_READ command
*/
struct cmd_debug_fread_response {
/** @brief Size of data provided in this response in bytes */
uint32_t readlen;
/** @brief File data from seek position */
char data[DEBUG_READ_MAX_SZ];
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Maximum size of write data in bytes.
* Value is derived from memory available in message payload while
* using @ref cmd_debug_fwrite_request.
*/
#define DEBUG_WRITE_MAX_SZ (MSG_DATA_MIN_SZ - 12)
/**
* @ingroup Debugfs
* @brief Parameters for #CMD_DEBUG_WRITE command
*/
struct cmd_debug_fwrite_request {
/** @brief File access identifier received in response
* to prior #CMD_DEBUG_OPEN_RO -request
*/
uint32_t fd;
/** @brief Size of write data in bytes */
uint32_t datalen;
/** @brief Data to be written */
char data[DEBUG_WRITE_MAX_SZ];
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Parameters for #CMD_DEBUG_CLOSE command
*/
struct cmd_debug_fclose_request {
/**
* @brief File access identifier received in prior response
* to #CMD_DEBUG_OPEN_RO or #CMD_DEBUG_OPEN_WO -request.
*/
uint32_t fd;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
* @brief Request with #MRQ_DEBUG.
*
* The sender of an #MRQ_DEBUG message uses mrq_debug_request::cmd to specify
* which debugfs sub-command to execute. Legal sub-commands are the values
* specified in the @ref mrq_debug_commands -enumeration. Each sub-command
* requires a specific additional payload of data according to the following
* table:
*
* |Sub-command |Payload structure |
* |--------------------|---------------------------|
* |#CMD_DEBUG_OPEN_RO |cmd_debug_fopen_request |
* |#CMD_DEBUG_OPEN_WO |cmd_debug_fopen_request |
* |#CMD_DEBUG_READ |cmd_debug_fread_request |
* |#CMD_DEBUG_WRITE |cmd_debug_fwrite_request |
* |#CMD_DEBUG_CLOSE |cmd_debug_fclose_request |
*/
struct mrq_debug_request {
/** @brief Sub-command identifier from @ref mrq_debug_commands */
uint32_t cmd;
union {
/**
* @brief Request payload for #CMD_DEBUG_OPEN_RO and
* #CMD_DEBUG_OPEN_WO sub-commands
*/
struct cmd_debug_fopen_request fop;
/** @brief Request payload for #CMD_DEBUG_READ sub-command */
struct cmd_debug_fread_request frd;
/** @brief Request payload for #CMD_DEBUG_WRITE sub-command */
struct cmd_debug_fwrite_request fwr;
/** @brief Request payload for #CMD_DEBUG_CLOSE sub-command */
struct cmd_debug_fclose_request fcl;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup Debugfs
*/
struct mrq_debug_response {
union {
/**
* @brief Response data for the #CMD_DEBUG_OPEN_RO and
* #CMD_DEBUG_OPEN_WO sub-commands
*/
struct cmd_debug_fopen_response fop;
/** @brief Response data for the #CMD_DEBUG_READ sub-command */
struct cmd_debug_fread_response frd;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup MRQ_Codes
* @def MRQ_RESET
* @brief Reset an IP block
*
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_reset_request
* * Response Payload: @ref mrq_reset_response
*
* @addtogroup Reset
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_RESET
*/
enum mrq_reset_commands {
/**
* @brief Assert module reset
*
* mrq_response::err is
* * 0 if the operation was successful
* * -#BPMP_EINVAL if mrq_reset_request::reset_id is invalid
* * -#BPMP_EACCES if mrq master is not an owner of target domain reset
* * -#BPMP_ENOTSUP if target domain h/w state does not allow reset
*/
CMD_RESET_ASSERT = 1,
/**
* @brief Deassert module reset
*
* mrq_response::err is
* * 0 if the operation was successful
* * -#BPMP_EINVAL if mrq_reset_request::reset_id is invalid
* * -#BPMP_EACCES if mrq master is not an owner of target domain reset
* * -#BPMP_ENOTSUP if target domain h/w state does not allow reset
*/
CMD_RESET_DEASSERT = 2,
/**
* @brief Assert and deassert the module reset
*
* mrq_response::err is
* * 0 if the operation was successful
* * -#BPMP_EINVAL if mrq_reset_request::reset_id is invalid
* * -#BPMP_EACCES if mrq master is not an owner of target domain reset
* * -#BPMP_ENOTSUP if target domain h/w state does not allow reset
*/
CMD_RESET_MODULE = 3,
/**
* @brief Get the highest reset ID
*
* mrq_response::err is
* * 0 if the operation was successful
* * -#BPMP_ENODEV if no reset domains are supported (number of IDs is 0)
*/
CMD_RESET_GET_MAX_ID = 4,
/** @brief Not part of ABI and subject to change */
CMD_RESET_MAX,
};
/**
* @brief Request with #MRQ_RESET
*
* Used by the sender of an #MRQ_RESET message to request BPMP to
* assert or deassert a given reset line.
*/
struct mrq_reset_request {
/** @brief Reset action to perform, from @ref mrq_reset_commands */
uint32_t cmd;
/** @brief ID of the reset to affected, from @ref bpmp_reset_ids */
uint32_t reset_id;
} BPMP_ABI_PACKED;
/**
* @brief Response for MRQ_RESET sub-command CMD_RESET_GET_MAX_ID. When
* this sub-command is not supported, firmware will return -BPMP_EBADCMD
* in mrq_response::err.
*/
struct cmd_reset_get_max_id_response {
/** @brief Max reset id */
uint32_t max_id;
} BPMP_ABI_PACKED;
/**
* @brief Response with MRQ_RESET
*
* Each sub-command supported by @ref mrq_reset_request may return
* sub-command-specific data. Some do and some do not as indicated
* in the following table:
*
* | sub-command | payload |
* |----------------------|------------------|
* | CMD_RESET_ASSERT | - |
* | CMD_RESET_DEASSERT | - |
* | CMD_RESET_MODULE | - |
* | CMD_RESET_GET_MAX_ID | reset_get_max_id |
*/
struct mrq_reset_response {
union {
struct cmd_reset_get_max_id_response reset_get_max_id;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} Reset */
/**
* @ingroup MRQ_Codes
* @def MRQ_I2C
* @brief Issue an i2c transaction
*
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_i2c_request
* * Response Payload: @ref mrq_i2c_response
*
* @addtogroup I2C
* @{
*/
/**
* @brief Size of the cmd_i2c_xfer_request::data_buf -member array in bytes.
*/
#define TEGRA_I2C_IPC_MAX_IN_BUF_SIZE (MSG_DATA_MIN_SZ - 12U)
/**
* @brief Size of the cmd_i2c_xfer_response::data_buf -member array in bytes.
*/
#define TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE (MSG_DATA_MIN_SZ - 4U)
/**
* @defgroup seriali2c_flags I2C flags
*
* @brief I2C transaction modifier flags for each transaction segment
* in #MRQ_I2C subcommand CMD_I2C_XFER
*/
/**
* @addtogroup seriali2c_flags
* @{
*/
/** @brief when set, use 10-bit I2C slave address */
#define SERIALI2C_TEN 0x0010U
/** @brief when set, perform a Read transaction */
#define SERIALI2C_RD 0x0001U
/**
* @brief when set, no repeated START is issued between the segments
* of transaction. This flag is ignored for the first segment as any
* transaction always starts with a START condition
*/
#define SERIALI2C_NOSTART 0x4000U
/**
* @brief when set, a no-ACK from slave device is ignored and treated
* always as success
*/
#define SERIALI2C_IGNORE_NAK 0x1000U
/** @} seriali2c_flags */
/** brief Unused flag. Retained for backwards compatibility. */
#define SERIALI2C_STOP 0x8000U
/** brief Unused flag. Retained for backwards compatibility. */
#define SERIALI2C_REV_DIR_ADDR 0x2000U
/** brief Unused flag. Retained for backwards compatibility. */
#define SERIALI2C_NO_RD_ACK 0x0800U
/** brief Unused flag. Retained for backwards compatibility. */
#define SERIALI2C_RECV_LEN 0x0400U
/**
* @brief Supported I2C sub-command identifiers
*/
enum mrq_i2c_commands {
/** @brief Perform an I2C transaction */
CMD_I2C_XFER = 1
};
/**
* @brief Serializable i2c request
*
* Instances of this structure are packed (little-endian) into
* cmd_i2c_xfer_request::data_buf. Each instance represents a single
* transaction (or a portion of a transaction with repeated starts) on
* an i2c bus.
*
* Because these structures are packed, some instances are likely to
* be misaligned. Additionally because #data is variable length, it is
* not possible to iterate through a serialized list of these
* structures without inspecting #len in each instance. It may be
* easier to serialize or deserialize cmd_i2c_xfer_request::data_buf
* manually rather than using this structure definition.
*/
struct serial_i2c_request {
/** @brief I2C slave address */
uint16_t addr;
/** @brief Bitmask of @ref seriali2c_flags */
uint16_t flags;
/** @brief Length of I2C transaction in bytes */
uint16_t len;
/** @brief For write transactions only, #len bytes of data */
uint8_t data[];
} BPMP_ABI_PACKED;
/**
* @brief Trigger one or more i2c transactions
*/
struct cmd_i2c_xfer_request {
/**
* @brief Tegra PWR_I2C bus identifier
*
* @cond (bpmp_t186 || bpmp_t194 || bpmp_t234 || bpmp_t238 || bpmp_t264)
* Must be set to 5.
* @endcond
*
* @cond (bpmp_th500)
* Must be set to 1.
* @endcond
*/
uint32_t bus_id;
/** @brief Count of valid bytes in #data_buf*/
uint32_t data_size;
/** @brief Serialized packed instances of @ref serial_i2c_request*/
uint8_t data_buf[TEGRA_I2C_IPC_MAX_IN_BUF_SIZE];
} BPMP_ABI_PACKED;
/**
* @brief Container for data read from the i2c bus
*
* Processing an cmd_i2c_xfer_request::data_buf causes BPMP to execute
* zero or more I2C reads. The data read from the bus is serialized
* into #data_buf.
*/
struct cmd_i2c_xfer_response {
/** @brief Count of valid bytes in #data_buf*/
uint32_t data_size;
/** @brief I2C read data */
uint8_t data_buf[TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE];
} BPMP_ABI_PACKED;
/**
* @brief Request with #MRQ_I2C
*/
struct mrq_i2c_request {
/** @brief Always CMD_I2C_XFER (i.e. 1) */
uint32_t cmd;
/** @brief Parameters of the transfer request */
struct cmd_i2c_xfer_request xfer;
} BPMP_ABI_PACKED;
/**
* @brief Response to #MRQ_I2C
*
* mrq_response::err value for this response is defined as:
*
* | Value | Description |
* |--------------------|---------------------------------------------------------------------|
* | 0 | Success |
* | -#BPMP_EBADCMD | mrq_i2c_request::cmd is other than 1 |
* | -#BPMP_EINVAL | cmd_i2c_xfer_request does not contain correctly formatted request |
* | -#BPMP_ENODEV | cmd_i2c_xfer_request::bus_id is not supported by BPMP |
* | -#BPMP_EACCES | I2C transaction is not allowed due to firewall rules |
* | -#BPMP_ETIMEDOUT | I2C transaction times out |
* | -#BPMP_ENXIO | I2C slave device does not reply with ACK to the transaction |
* | -#BPMP_EAGAIN | ARB_LOST condition is detected by the I2C controller |
* | -#BPMP_EIO | Any other I2C controller error code than NO_ACK or ARB_LOST |
*/
struct mrq_i2c_response {
struct cmd_i2c_xfer_response xfer;
} BPMP_ABI_PACKED;
/** @} I2C */
/**
* @ingroup MRQ_Codes
* @def MRQ_CLK
* @brief Perform a clock operation
*
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_clk_request
* * Response Payload: @ref mrq_clk_response
*
* @addtogroup Clocks
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_CLK
*/
enum mrq_clk_commands {
/** Get clock rate */
CMD_CLK_GET_RATE = 1,
/** Set clock rate */
CMD_CLK_SET_RATE = 2,
/** Get attainable clock rate closer to a given rate */
CMD_CLK_ROUND_RATE = 3,
/** Get parent clock identifier for a given clock */
CMD_CLK_GET_PARENT = 4,
/** Change clock parent */
CMD_CLK_SET_PARENT = 5,
/** Get clock enable status */
CMD_CLK_IS_ENABLED = 6,
/** Enable a clock */
CMD_CLK_ENABLE = 7,
/** Disable a clock */
CMD_CLK_DISABLE = 8,
/** Get all information about a clock */
CMD_CLK_GET_ALL_INFO = 14,
/** Get largest supported clock identifier */
CMD_CLK_GET_MAX_CLK_ID = 15,
/** Get clock maximum rate at VMIN */
CMD_CLK_GET_FMAX_AT_VMIN = 16,
/** Largest supported #MRQ_CLK sub-command identifier + 1 */
CMD_CLK_MAX,
};
/**
* Flag bit set in cmd_clk_get_all_info_response::flags -field when clock
* supports changing of the parent clock at runtime.
*/
#define BPMP_CLK_HAS_MUX (1U << 0U)
/**
* Flag bit set in cmd_clk_get_all_info_response::flags -field when clock
* supports changing the clock rate at runtime.
*/
#define BPMP_CLK_HAS_SET_RATE (1U << 1U)
/**
* Flag bit set in cmd_clk_get_all_info_response::flags -field when clock is a
* root clock without visible parents.
*/
#define BPMP_CLK_IS_ROOT (1U << 2U)
#define BPMP_CLK_IS_VAR_ROOT (1U << 3U)
/**
* @brief Protection against rate and parent changes
*
* #MRQ_CLK command #CMD_CLK_SET_RATE or #MRQ_CLK command #CMD_CLK_SET_PARENT
* will return -#BPMP_EACCES.
*/
#define BPMP_CLK_RATE_PARENT_CHANGE_DENIED (1U << 30)
/**
* @brief Protection against state changes
*
* #MRQ_CLK command #CMD_CLK_ENABLE or #MRQ_CLK command #CMD_CLK_DISABLE
* will return -#BPMP_EACCES.
*/
#define BPMP_CLK_STATE_CHANGE_DENIED (1U << 31)
/**
* Size of the cmd_clk_get_all_info_response::name -array in number
* of elements.
*/
#define MRQ_CLK_NAME_MAXLEN 40U
/**
* @brief Maximum number of elements in parent_id arrays of clock info responses.
*/
#define MRQ_CLK_MAX_PARENTS 16U
/**
* @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_GET_RATE
*
* This structure is an empty placeholder for future expansion of this
* sub-command.
*/
struct cmd_clk_get_rate_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_GET_RATE
*/
struct cmd_clk_get_rate_response {
/**
* Current rate of the given clock in Hz if mrq_response::err is 0 to
* indicate successful #CMD_CLK_GET_RATE -request.
*/
int64_t rate;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_SET_RATE
*/
struct cmd_clk_set_rate_request {
/** Unused / reserved field. */
int32_t unused;
/** Requested rate of the clock in Hz. */
int64_t rate;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_SET_RATE
*/
struct cmd_clk_set_rate_response {
/**
* If request was successful (mrq_response::err is 0), set to the new
* rate of the given clock in Hz.
*/
int64_t rate;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_ROUND_RATE
*/
struct cmd_clk_round_rate_request {
/** Unused / reserved field. */
int32_t unused;
/** Target rate for the clock */
int64_t rate;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_ROUND_RATE
*/
struct cmd_clk_round_rate_response {
/**
* The attainable rate if request was successful
* (mrq_response::err is 0).
*/
int64_t rate;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_GET_PARENT
*
* This structure is an empty placeholder for future expansion of this
* sub-command.
*/
struct cmd_clk_get_parent_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_GET_PARENT
*/
struct cmd_clk_get_parent_response {
/**
* The clock identifier of the parent clock if request was successful
* (mrq_response::err is 0).
*/
uint32_t parent_id;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_SET_PARENT
*/
struct cmd_clk_set_parent_request {
/**
* The clock identifier of the new parent clock.
*/
uint32_t parent_id;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_SET_PARENT
*/
struct cmd_clk_set_parent_response {
/**
* The clock identifier of the new parent clock if request was
* successful (mrq_response::err is 0).
*/
uint32_t parent_id;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #CMD_CLK_IS_ENABLED -sub-command
*
* This structure is an empty placeholder for future expansion of this
* sub-command.
*/
struct cmd_clk_is_enabled_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_IS_ENABLED
*/
struct cmd_clk_is_enabled_response {
/**
* @brief The state of the clock that has been successfully
* requested with #CMD_CLK_ENABLE or #CMD_CLK_DISABLE by the
* master invoking the command earlier.
*
* The state may not reflect the physical state of the clock
* if there are some other masters requesting it to be
* enabled. Valid values:
*
* * Value 0: The clock is disabled,
* * Value 1: The clock is enabled.
*/
int32_t state;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_ENABLE
*
* This structure is an empty placeholder for future expansion of this
* sub-command.
*/
struct cmd_clk_enable_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_ENABLE
*
* This structure is an empty placeholder for future expansion of this
* sub-command.
*/
struct cmd_clk_enable_response {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_DISABLE
*
* This structure is an empty placeholder for future expansion of this
* sub-command.
*/
struct cmd_clk_disable_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_DISABLE
*
* This structure is an empty placeholder for future expansion of this
* sub-command.
*/
struct cmd_clk_disable_response {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_GET_ALL_INFO
*
* This structure is an empty placeholder for future expansion of this
* sub-command.
*/
struct cmd_clk_get_all_info_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_GET_ALL_INFO
*
* The values in the response are only set and valid if request status in
* mrq_response::err is 0.
*/
struct cmd_clk_get_all_info_response {
/**
* State / informational flags for the clock:
*
* | Flag bit | Description |
* |------------------------|------------------------------------------|
* | #BPMP_CLK_IS_ROOT | Clock is a root clock. |
* | #BPMP_CLK_HAS_MUX | Clock supports changing of parent clock. |
* | #BPMP_CLK_HAS_SET_RATE | Clock supports changing clock rate. |
*/
uint32_t flags;
/**
* Current parent clock identifier.
*/
uint32_t parent;
/**
* Array of possible parent clock identifiers.
*/
uint32_t parents[MRQ_CLK_MAX_PARENTS];
/**
* Number of identifiers in the #parents -array.
*/
uint8_t num_parents;
/**
* Friendly name of the clock, truncated to fit the array
* and null-terminated.
*/
uint8_t name[MRQ_CLK_NAME_MAXLEN];
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_GET_MAX_CLK_ID
*
* This structure is an empty placeholder for future expansion of this
* sub-command.
*/
struct cmd_clk_get_max_clk_id_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_GET_MAX_CLK_ID
*/
struct cmd_clk_get_max_clk_id_response {
/** @brief Largest supported clock identifier. */
uint32_t max_id;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_CLK sub-command #CMD_CLK_GET_FMAX_AT_VMIN
*
* This structure is an empty placeholder for future expansion of this
* sub-command.
*/
struct cmd_clk_get_fmax_at_vmin_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_CLK sub-command #CMD_CLK_GET_FMAX_AT_VMIN
*/
struct cmd_clk_get_fmax_at_vmin_response {
int64_t rate;
} BPMP_ABI_PACKED;
/**
* @ingroup Clocks
* @brief Request with #MRQ_CLK
*
* Used by the sender of an #MRQ_CLK message to control clocks. The
* clk_request is split into several sub-commands. Some sub-commands
* require no additional data. Others have a sub-command specific
* payload
*
* |Sub-command |Payload |
* |----------------------------|-----------------------------|
* |#CMD_CLK_GET_RATE |- |
* |#CMD_CLK_SET_RATE |#cmd_clk_set_rate_request |
* |#CMD_CLK_ROUND_RATE |#cmd_clk_round_rate_request |
* |#CMD_CLK_GET_PARENT |- |
* |#CMD_CLK_SET_PARENT |#cmd_clk_set_parent_request |
* |#CMD_CLK_IS_ENABLED |- |
* |#CMD_CLK_ENABLE |- |
* |#CMD_CLK_DISABLE |- |
* |#CMD_CLK_GET_ALL_INFO |- |
* |#CMD_CLK_GET_MAX_CLK_ID |- |
* |#CMD_CLK_GET_FMAX_AT_VMIN |- |
*/
struct mrq_clk_request {
/** @brief Sub-command and clock id concatenated to 32-bit word.
*
* - bits[31..24] is the sub-command ID from @ref mrq_clk_commands.
* - bits[23..0] is the clock identifier from @ref bpmp_clock_ids.
*/
uint32_t cmd_and_id;
union {
/** @private */
struct cmd_clk_get_rate_request clk_get_rate;
struct cmd_clk_set_rate_request clk_set_rate;
struct cmd_clk_round_rate_request clk_round_rate;
/** @private */
struct cmd_clk_get_parent_request clk_get_parent;
struct cmd_clk_set_parent_request clk_set_parent;
/** @private */
struct cmd_clk_enable_request clk_enable;
/** @private */
struct cmd_clk_disable_request clk_disable;
/** @private */
struct cmd_clk_is_enabled_request clk_is_enabled;
/** @private */
struct cmd_clk_get_all_info_request clk_get_all_info;
/** @private */
struct cmd_clk_get_max_clk_id_request clk_get_max_clk_id;
/** @private */
struct cmd_clk_get_fmax_at_vmin_request clk_get_fmax_at_vmin;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup Clocks
* @brief Response to MRQ_CLK
*
* Each sub-command supported by @ref mrq_clk_request may return
* sub-command-specific data. Some do and some do not as indicated in
* the following table:
*
* |Sub-command |Payload |
* |----------------------------|-----------------------------------|
* |#CMD_CLK_GET_RATE |#cmd_clk_get_rate_response |
* |#CMD_CLK_SET_RATE |#cmd_clk_set_rate_response |
* |#CMD_CLK_ROUND_RATE |#cmd_clk_round_rate_response |
* |#CMD_CLK_GET_PARENT |#cmd_clk_get_parent_response |
* |#CMD_CLK_SET_PARENT |#cmd_clk_set_parent_response |
* |#CMD_CLK_IS_ENABLED |#cmd_clk_is_enabled_response |
* |#CMD_CLK_ENABLE |- |
* |#CMD_CLK_DISABLE |- |
* |#CMD_CLK_GET_ALL_INFO |#cmd_clk_get_all_info_response |
* |#CMD_CLK_GET_MAX_CLK_ID |#cmd_clk_get_max_clk_id_response |
* |#CMD_CLK_GET_FMAX_AT_VMIN |#cmd_clk_get_fmax_at_vmin_response |
*
*/
struct mrq_clk_response {
union {
struct cmd_clk_get_rate_response clk_get_rate;
struct cmd_clk_set_rate_response clk_set_rate;
struct cmd_clk_round_rate_response clk_round_rate;
struct cmd_clk_get_parent_response clk_get_parent;
struct cmd_clk_set_parent_response clk_set_parent;
/** @private */
struct cmd_clk_enable_response clk_enable;
/** @private */
struct cmd_clk_disable_response clk_disable;
struct cmd_clk_is_enabled_response clk_is_enabled;
struct cmd_clk_get_all_info_response clk_get_all_info;
struct cmd_clk_get_max_clk_id_response clk_get_max_clk_id;
struct cmd_clk_get_fmax_at_vmin_response clk_get_fmax_at_vmin;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} Clocks */
/**
* @ingroup MRQ_Codes
* @def MRQ_QUERY_ABI
* @brief Check if an MRQ is implemented
*
* * Initiators: Any
* * Targets: Any except DMCE
* * Request Payload: @ref mrq_query_abi_request
* * Response Payload: @ref mrq_query_abi_response
*/
/**
* @ingroup ABI_info
* @brief Request with #MRQ_QUERY_ABI
*
* Used by #MRQ_QUERY_ABI call to check if MRQ code #mrq is supported
* by the recipient.
*/
struct mrq_query_abi_request {
/** @brief MRQ code to query */
uint32_t mrq;
} BPMP_ABI_PACKED;
/**
* @ingroup ABI_info
* @brief Response to MRQ_QUERY_ABI
*
* @note mrq_response::err of 0 indicates that the query was
* successful, not that the MRQ itself is supported!
*/
struct mrq_query_abi_response {
/**
* This response field is set to:
* - 0 if queried MRQ is supported, or
* - -#BPMP_ENODEV if queried MRQ is not supported
*/
int32_t status;
} BPMP_ABI_PACKED;
/**
*
* @ingroup MRQ_Codes
* @def MRQ_PG
* @brief Control power-gating state of a partition.
*
* @cond (bpmp_t194 || bpmp_t186)
* @note On T194 and earlier BPMP-FW forcefully turns off some partitions as
* part of SC7 entry because their state cannot be adequately restored on exit.
* Therefore, it is recommended to power off all domains via MRQ_PG prior to SC7
* entry.
* See @ref bpmp_pdomain_ids for further detail.
* @endcond
*
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_pg_request
* * Response Payload: @ref mrq_pg_response
*
* @addtogroup Powergating
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_PG -command.
*/
enum mrq_pg_cmd {
/**
* @brief Check whether the BPMP driver supports the specified
* request type
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_PG_QUERY_ABI = 0,
/**
* @brief Set the current state of specified power domain. The
* possible values for power domains are defined in enum
* pg_states
*
* mrq_response:err for this sub-command is defined as:
*
* | Value | Description |
* | -------------- | ------------------------------------------------------------------------ |
* | 0 | Request was successful. |
* | -#BPMP_EINVAL | Invalid request parameters were provided. |
* | -#BPMP_EACCES | Permission denied or always-off partition was attempted to be turned on. |
* | Any other <0 | Internal error while performing the operation. |
*/
CMD_PG_SET_STATE = 1,
/**
* @brief Get the current state of specified power domain. The
* possible values for power domains are defined in enum
* pg_states
*
* mrq_response:err for this sub-command is defined as:
*
* | Value | Description |
* | -------------- | ---------------------------------------------- |
* | 0 | Request was successful. |
* | -#BPMP_EINVAL | Invalid request parameters were provided. |
* | Any other <0 | Internal error while performing the operation. |
*/
CMD_PG_GET_STATE = 2,
/**
* @brief Get the name string of specified power domain id.
*
* mrq_response:err for this sub-command is defined as:
*
* | Value | Description |
* | -------------- | ---------------------------------------------- |
* | 0 | Request was successful. |
* | -#BPMP_EINVAL | Invalid request parameters were provided. |
* | Any other <0 | Internal error while performing the operation. |
*/
CMD_PG_GET_NAME = 3,
/**
* @brief Get the highest power domain id in the system. Not
* all IDs between 0 and max_id are valid IDs.
*
* mrq_response:err for this sub-command is defined as:
*
* | Value | Description |
* | -------------- | ---------------------------------------------- |
* | 0 | Request was successful. |
* | -#BPMP_EINVAL | Invalid request parameters were provided. |
* | Any other <0 | Internal error while performing the operation. |
*/
CMD_PG_GET_MAX_ID = 4,
};
#define MRQ_PG_NAME_MAXLEN 40
/**
* @brief State value for the cmd_pg_set_state_request::state -field.
*/
enum pg_states {
/** @brief Power domain is OFF */
PG_STATE_OFF = 0,
/** @brief Power domain is ON */
PG_STATE_ON = 1,
/** @cond bpmp_t186 */
/**
* @brief a legacy state where power domain and the clock
* associated to the domain are ON.
* This state is only supported in T186, and the use of it is
* deprecated.
*/
PG_STATE_RUNNING = 2,
/** @endcond */
};
struct cmd_pg_query_abi_request {
/** #MRQ_PG sub-command identifier from @ref mrq_pg_cmd */
uint32_t type;
} BPMP_ABI_PACKED;
struct cmd_pg_set_state_request {
/** One of the state values from @ref pg_states */
uint32_t state;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for the #MRQ_PG sub-command #CMD_PG_GET_STATE
*/
struct cmd_pg_get_state_response {
/**
* @brief The state of the power partition that has been
* successfully requested by the master earlier using #MRQ_PG
* command #CMD_PG_SET_STATE.
*
* The state may not reflect the physical state of the power
* partition if there are some other masters requesting it to
* be enabled.
*
* See @ref pg_states for possible values.
*/
uint32_t state;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for the #MRQ_PG sub-command #CMD_PG_GET_NAME
*/
struct cmd_pg_get_name_response {
/**
* @brief On successful response contains the null-terminated
* friendly name of the requested power-domain.
*/
uint8_t name[MRQ_PG_NAME_MAXLEN];
} BPMP_ABI_PACKED;
/**
* @brief Response payload for the #MRQ_PG sub-command #CMD_PG_GET_MAX_ID
*/
struct cmd_pg_get_max_id_response {
uint32_t max_id;
} BPMP_ABI_PACKED;
/**
* @brief Request with #MRQ_PG
*
* Used by the sender of an #MRQ_PG message to control power
* partitions. The expected payload depends on the sub-command identifier.
* Some sub-commands require no additional data while others have a sub-command
* specific payload:
*
* |Sub-command |Payload |
* |----------------------------|---------------------------|
* |#CMD_PG_QUERY_ABI | #cmd_pg_query_abi_request |
* |#CMD_PG_SET_STATE | #cmd_pg_set_state_request |
* |#CMD_PG_GET_STATE | - |
* |#CMD_PG_GET_NAME | - |
* |#CMD_PG_GET_MAX_ID | - |
*
*/
struct mrq_pg_request {
/** @brief Sub-command identifier from @ref mrq_pg_cmd. */
uint32_t cmd;
/**
* @brief Power-domain identifier
*/
uint32_t id;
union {
struct cmd_pg_query_abi_request query_abi;
struct cmd_pg_set_state_request set_state;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response to #MRQ_PG
*
* Some of the #MRQ_PG sub-commands return a sub-command -specific payload
* as specified in the following table:
*
* |Sub-command |Payload |
* |--------------------|------------------------------|
* |#CMD_PG_QUERY_ABI | - |
* |#CMD_PG_SET_STATE | - |
* |#CMD_PG_GET_STATE | #cmd_pg_get_state_response |
* |#CMD_PG_GET_NAME | #cmd_pg_get_name_response |
* |#CMD_PG_GET_MAX_ID | #cmd_pg_get_max_id_response |
*/
struct mrq_pg_response {
union {
struct cmd_pg_get_state_response get_state;
struct cmd_pg_get_name_response get_name;
struct cmd_pg_get_max_id_response get_max_id;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} Powergating */
/**
* @ingroup MRQ_Codes
* @def MRQ_THERMAL
* @brief Interact with BPMP thermal framework
*
* * Initiators: Any
* * Targets: Any
* * Request Payload: #mrq_thermal_host_to_bpmp_request
* * Response Payload: #mrq_thermal_bpmp_to_host_response
*
* @addtogroup Thermal
*
* The BPMP firmware includes a thermal framework. Drivers within the
* bpmp firmware register with the framework to provide thermal
* zones. Each thermal zone corresponds to an entity whose temperature
* can be measured. The framework also has a notion of trip points. A
* trip point consists of a thermal zone id, a temperature, and a
* callback routine. The framework invokes the callback when the zone
* hits the indicated temperature. The BPMP firmware uses this thermal
* framework interally to implement various temperature-dependent
* functions.
*
* Software on the CPU can use #MRQ_THERMAL (with payload @ref
* mrq_thermal_host_to_bpmp_request) to interact with the BPMP thermal
* framework. The CPU must It can query the number of supported zones,
* query zone temperatures, and set trip points.
*
* When a trip point set by the CPU gets crossed, BPMP firmware issues
* an IPC to the CPU having mrq_request::mrq = #MRQ_THERMAL and a
* payload of @ref mrq_thermal_bpmp_to_host_request.
* @{
*/
/**
* @brief Sub-command identifiers for Host->BPMP #MRQ_THERMAL -command.
*/
enum mrq_thermal_host_to_bpmp_cmd {
/**
* @brief Check whether BPMP-FW supports the specified
* #MRQ_THERMAL sub-command.
*
* Host needs to supply request parameters.
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_THERMAL_QUERY_ABI = 0,
/**
* @brief Get the current temperature of the specified zone.
*
* Host needs to supply request parameters.
*
* mrq_response::err value for this sub-command is:
*
* | Value | Description |
* | -------------- | ----------------------------------------- |
* | 0 | Temperature query succeeded. |
* | -#BPMP_EINVAL | Invalid request parameters. |
* | -#BPMP_ENOENT | No driver registered for thermal zone. |
* | -#BPMP_EFAULT | Problem reading temperature measurement. |
*/
CMD_THERMAL_GET_TEMP = 1,
/**
* @cond (!bpmp_safe && !bpmp_t264)
* @brief Enable or disable and set the lower and upper
* thermal limits for a thermal trip point. Each zone has
* one trip point.
*
* Host needs to supply request parameters. Once the
* temperature hits a trip point, the BPMP will send a message
* to the CPU having MRQ command identifier equal to #MRQ_THERMAL and
* sub-command identifier equal to #CMD_THERMAL_HOST_TRIP_REACHED.
*
* If #CMD_THERMAL_SET_TRIP -sub-command is issued for a
* thermal zone that is currently power gated and unable to
* report temperature, a temperature of -256C is used as
* temperature for evaluation of the trip.
*
* mrq_response::err for this sub-command is defined as:
*
* | Value | Description |
* | --------------- | -------------------------------------- |
* | 0 | Trip successfully set. |
* | -#BPMP_EINVAL | Invalid request parameters. |
* | -#BPMP_ENOENT | No driver registered for thermal zone. |
* | -#BPMP_EFAULT | Problem setting trip point. |
*/
CMD_THERMAL_SET_TRIP = 2,
/** @endcond */
/**
* @brief Get the number of supported thermal zones.
*
* No request parameters required.
*
* mrq_response::err is always 0, indicating success.
*/
CMD_THERMAL_GET_NUM_ZONES = 3,
/**
* @brief Get the thermal trip value of the specified zone.
*
* Host needs to supply request parameters.
*
* mrq_response::err for this sub-command is defined as:
*
* | Value | Description |
* | --------------- | -------------------------------------- |
* | 0 | Valid zone information returned. |
* | -#BPMP_EINVAL | Invalid request parameters. |
* | -#BPMP_ENOENT | No driver registered for thermal zone. |
* | -#BPMP_ERANGE | Thermal trip is invalid or disabled. |
* | -#BPMP_EFAULT | Problem reading zone information. |
*/
CMD_THERMAL_GET_THERMTRIP = 4,
/**
* @brief Number of supported host-to-bpmp commands.
*/
CMD_THERMAL_HOST_TO_BPMP_NUM
};
/**
* @brief Sub-command identifiers for BPMP->host #MRQ_THERMAL -command
*/
enum mrq_thermal_bpmp_to_host_cmd {
/**
* @brief Indication that the temperature for a zone has
* exceeded the range indicated in the thermal trip point
* for the zone.
*
* BPMP-FW needs to supply request parameters. Host only needs to
* acknowledge.
*/
CMD_THERMAL_HOST_TRIP_REACHED = 100,
/**
* @brief: Number of supported bpmp-to-host commands. May
* increase in future.
*/
CMD_THERMAL_BPMP_TO_HOST_NUM
};
/**
* Host->BPMP request payload for the #CMD_THERMAL_QUERY_ABI sub-command
*/
struct cmd_thermal_query_abi_request {
/**
* Request type for which to check whether supported by BPMP-FW.
*
* Valid identifiers are available at #mrq_thermal_host_to_bpmp_cmd
*/
uint32_t type;
} BPMP_ABI_PACKED;
/**
* Host->BPMP request payload for the #CMD_THERMAL_GET_TEMP sub-command
*/
struct cmd_thermal_get_temp_request {
/** Thermal zone identifier from @ref bpmp_thermal_ids. */
uint32_t zone;
} BPMP_ABI_PACKED;
/**
* BPMP->Host response payload for the #CMD_THERMAL_GET_TEMP sub-command.
*
* mrq_response::err is defined as:
*
* | Value | Description |
* | ------------- | -------------------------------------------------------- |
* | 0 | Request succeeded. |
* | -#BPMP_EINVAL | Request parameters were invalid. |
* | -#BPMP_ENOENT | No driver was registered for the specified thermal zone. |
* | -#BPMP_EFAULT | For other BPMP-FW internal thermal zone driver errors. |
*/
struct cmd_thermal_get_temp_response {
/** @brief Current temperature in millicelsius. */
int32_t temp;
} BPMP_ABI_PACKED;
/**
* @cond (!bpmp_safe && !bpmp_t264)
*
* Host->BPMP request payload for the #CMD_THERMAL_SET_TRIP sub-command.
*/
struct cmd_thermal_set_trip_request {
/** @brief Thermal zone identifier from @ref bpmp_thermal_ids. */
uint32_t zone;
/** @brief Temperature of lower trip point in millicelsius */
int32_t low;
/** @brief Temperature of upper trip point in millicelsius */
int32_t high;
/** 1 to enable trip point, 0 to disable trip point */
uint32_t enabled;
} BPMP_ABI_PACKED;
/**
* BPMP->Host request payload for the #CMD_THERMAL_HOST_TRIP_REACHED sub-command.
*/
struct cmd_thermal_host_trip_reached_request {
/**
* @brief ID of the thermal zone where trip point was reached,
* from @ref bpmp_thermal_ids.
*/
uint32_t zone;
} BPMP_ABI_PACKED;
/** @endcond */
/**
* BPMP->Host response payload for the #CMD_THERMAL_GET_NUM_ZONES sub-command.
*/
struct cmd_thermal_get_num_zones_response {
/**
* @brief Number of supported thermal zones.
*
* The thermal zones are indexed starting from zero.
*/
uint32_t num;
} BPMP_ABI_PACKED;
/**
* Host->BPMP request payload for the #CMD_THERMAL_GET_THERMTRIP sub-command.
*/
struct cmd_thermal_get_thermtrip_request {
/** @brief Thermal zone identifier from @ref bpmp_thermal_ids. */
uint32_t zone;
} BPMP_ABI_PACKED;
/**
* BPMP->Host response payload for the #CMD_THERMAL_GET_THERMTRIP sub-command.
*/
struct cmd_thermal_get_thermtrip_response {
/** @brief HW shutdown temperature in millicelsius. */
int32_t thermtrip;
} BPMP_ABI_PACKED;
/**
* Host->BPMP #MRQ_THERMAL request payload.
*
* Response payload type is #mrq_thermal_bpmp_to_host_response.
*/
struct mrq_thermal_host_to_bpmp_request {
/**
* Request sub-command identifier from @ref mrq_thermal_host_to_bpmp_cmd.
*/
uint32_t type;
union {
struct cmd_thermal_query_abi_request query_abi;
struct cmd_thermal_get_temp_request get_temp;
struct cmd_thermal_set_trip_request set_trip;
struct cmd_thermal_get_thermtrip_request get_thermtrip;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for the BPMP->Host #MRQ_THERMAL command.
*/
struct mrq_thermal_bpmp_to_host_request {
/**
* Request sub-command identifier from @ref mrq_thermal_bpmp_to_host_cmd.
*/
uint32_t type;
union {
struct cmd_thermal_host_trip_reached_request host_trip_reached;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for the Host->BPMP #MRQ_THERMAL command.
*/
union mrq_thermal_bpmp_to_host_response {
struct cmd_thermal_get_temp_response get_temp;
struct cmd_thermal_get_thermtrip_response get_thermtrip;
struct cmd_thermal_get_num_zones_response get_num_zones;
} BPMP_ABI_PACKED;
/** @} Thermal */
/** @cond (!bpmp_safe && (bpmp_t234 || bpmp_t238 || bpmp_t264))
* @ingroup MRQ_Codes
* @def MRQ_OC_STATUS
* @brief Query overcurrent status
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
* * Response Payload: @ref mrq_oc_status_response
*
* @addtogroup OC_status
* @{
*/
/**
* @brief Size of the mrq_oc_status_response::throt_en and
* mrq_oc_status_response::event_cnt -arrays.
*/
#define OC_STATUS_MAX_SIZE 24U
/**
* @brief Response payload for the #MRQ_OC_STATUS -command.
*
* mrq_response::err is 0 if the operation was successful and
* -#BPMP_ENODEV otherwise.
*/
struct mrq_oc_status_response {
/**
* @brief Value for each overcurrent alarm where zero signifies
* throttle is disabled, and non-zero throttle is enabled.
*/
uint8_t throt_en[OC_STATUS_MAX_SIZE];
/**
* @brief Total number of overcurrent events for each overcurrent alarm.
*/
uint32_t event_cnt[OC_STATUS_MAX_SIZE];
} BPMP_ABI_PACKED;
/** @} OC_status */
/** @endcond */
/** @cond (bpmp_th500 || bpmp_tb500 || bpmp_t238)
* @ingroup MRQ_Codes
* @def MRQ_THROTTLE
* @brief Overcurrent throttling
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_throttle_request
* * Response Payload: @ref mrq_throttle_response
* @addtogroup Throttle
* @{
*/
enum mrq_throttle_cmd {
/**
* @brief Check whether the BPMP-FW supports the specified
* #MRQ_THROTTLE sub-command.
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_THROTTLE_QUERY_ABI = 0,
/**
* @cond (bpmp_th500 || bpmp_tb500)
* @brief query chipthrot status
*
* mrq_response:err is defined as:
*
* | Value | Description |
* |----------------|--------------------------------------------------------------|
* | 0 | Success |
* | -#BPMP_ENODEV | CMD_THROTTLE_GET_CHIPTHROT_STATUS is not supported by BPMP-FW|
*/
CMD_THROTTLE_GET_CHIPTHROT_STATUS = 1,
/** @endcond */
/**
* @cond bpmp_t238
* @brief program OC throttle configuration
*
* mrq_response:err is defined as:
*
* | Value | Description |
* |----------------|--------------------------------------------------------------|
* | 0 | Success |
* | -#BPMP_EINVAL | ID out of range or alarm for this ID not enabled at boot |
* | -#BPMP_ENODEV | CMD_THROTTLE_SET_OC_CONFIG is not supported by BPMP-FW |
*/
CMD_THROTTLE_SET_OC_CONFIG = 2,
/** @endcond */
};
/**
* @brief Request payload for #MRQ_THROTTLE sub-command #CMD_THROTTLE_QUERY_ABI
*/
struct cmd_throttle_query_abi_request {
uint32_t cmd; /**< @ref mrq_throttle_cmd */
} BPMP_ABI_PACKED;
/**
* @cond bpmp_th500
* @brief Response payload for #MRQ_THROTTLE sub-command
* #CMD_THROTTLE_GET_CHIPTHROT_STATUS
*
* Bit-mask of all h/w throttling actions that have been engaged since
* last invocation of this command
* Bit 0...11 : HW throttling status of the thermal zones.
* Bit 12...23 : Reserved for future thermal zone events.
* Bit 24...25 : HW throttling status of the Over current Alarms OC1 & OC2.
* Bit 26...31 : Reserved for future Over current alarm events.
* Bit 32...63 : Reserved for future use.
* @endcond
* @cond bpmp_tb500
* @brief Response payload for #MRQ_THROTTLE sub-command
* #CMD_THROTTLE_GET_CHIPTHROT_STATUS
*
* Bit-mask of all h/w throttling actions that have been engaged since
* last invocation of this command
* Bit 0 : HW throttling status of the TB500C_TJ_MAX thermal zone.
* Bit 1...63 : Reserved for future use.
* @endcond
* @cond (bpmp_th500 || bpmp_tb500)
*/
struct cmd_throttle_get_chipthrot_status_response {
uint64_t status;
} BPMP_ABI_PACKED;
/** @endcond */
/**
* @cond bpmp_t238
* @brief Request payload for #MRQ_THROTTLE sub-command
* #CMD_THROTTLE_SET_OC_CONFIG
*
* Only alarms that have been configured as enabled in BPMP-DTB at boot can
* be reconfigured with this MRQ.
*/
struct cmd_throttle_set_oc_config_request {
/** @brief valid OC alarm ID from @ref bpmp_soctherm_edp_oc_ids */
uint32_t id;
/** @brief Throttling enable/disable
*
* Set to 1 to enable throttling, or 0 to disable. Other values are
* disallowed.
*/
uint8_t en_throttle;
} BPMP_ABI_PACKED;
/** @endcond */
/**
* @brief Request payload for the #MRQ_THROTTLE -command
*
* | Sub-command | Request payload |
* |------------------------------------|----------------------------------|
* | #CMD_THROTTLE_QUERY_ABI | #cmd_throttle_query_abi_request |
*
* @cond bpmp_th500
* The following additional sub-commands are supported on TH500 platforms:
* | Sub-command | Request payload |
* |------------------------------------|----------------------------------|
* | #CMD_THROTTLE_GET_CHIPTHROT_STATUS | - |
* @endcond
*
* @cond bpmp_tb500
* The following additional sub-commands are supported on TB500 platforms:
* | Sub-command | Request payload |
* |------------------------------------|----------------------------------|
* | #CMD_THROTTLE_GET_CHIPTHROT_STATUS | - |
* @endcond
*
* @cond bpmp_t238
* The following additional sub-commands are supported on T238 platforms:
* | Sub-command | Request payload |
* |------------------------------------|-------------------------------------|
* | #CMD_THROTTLE_SET_OC_CONFIG | #cmd_throttle_set_oc_config_request |
* @endcond
*/
struct mrq_throttle_request {
uint32_t cmd;
union {
struct cmd_throttle_query_abi_request throttle_query_abi_req;
/** @cond bpmp_t238 */
struct cmd_throttle_set_oc_config_request throttle_set_oc_config_req;
/** @endcond */
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for the #MRQ_THROTTLE -command.
*
* | Sub-command | Response payload |
* |------------------------------------|--------------------------------------------|
* | #CMD_THROTTLE_QUERY_ABI | - |
*
* @cond bpmp_th500
* The following additional sub-commands are supported on TH500 platforms:
* | Sub-command | Response payload |
* |------------------------------------|--------------------------------------------|
* | #CMD_THROTTLE_GET_CHIPTHROT_STATUS | #cmd_throttle_get_chipthrot_status_response|
* @endcond
*
* @cond bpmp_tb500
* The following additional sub-commands are supported on TB500 platforms:
* | Sub-command | Response payload |
* |------------------------------------|--------------------------------------------|
* | #CMD_THROTTLE_GET_CHIPTHROT_STATUS | #cmd_throttle_get_chipthrot_status_response|
* @endcond
*
* @cond bpmp_t238
* The following additional sub-commands are supported on T238 platforms:
* | Sub-command | Response payload |
* |------------------------------------|--------------------------------------------|
* | #CMD_THROTTLE_SET_OC_CONFIG | - |
* @endcond
*/
struct mrq_throttle_response {
union {
/** @cond (bpmp_th500 || bpmp_tb500) */
struct cmd_throttle_get_chipthrot_status_response throttle_get_chipthrot_status_resp;
/** @endcond */
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} Throttle */
/** @endcond */
/** @cond bpmp_t186
* @ingroup MRQ_Codes
* @def MRQ_CPU_VHINT
* @brief Query CPU voltage hint data
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_cpu_vhint_request
* * Response Payload: N/A
*
* @addtogroup Vhint
* @{
*/
/**
* @brief Request with #MRQ_CPU_VHINT
*
* Used by #MRQ_CPU_VHINT call by CCPLEX to retrieve voltage hint data
* from BPMP to memory space pointed by #addr. CCPLEX is responsible
* to allocate sizeof(cpu_vhint_data) sized block of memory and
* appropriately map it for BPMP before sending the request.
*/
struct mrq_cpu_vhint_request {
/** @brief IOVA address for the #cpu_vhint_data */
uint32_t addr;
/** @brief ID of the cluster whose data is requested */
uint32_t cluster_id;
} BPMP_ABI_PACKED;
/**
* @brief Description of the CPU v/f relation
*
* Used by #MRQ_CPU_VHINT call to carry data pointed by
* #mrq_cpu_vhint_request::addr
*/
struct cpu_vhint_data {
uint32_t ref_clk_hz; /**< reference frequency in Hz */
uint16_t pdiv; /**< post divider value */
uint16_t mdiv; /**< input divider value */
uint16_t ndiv_max; /**< fMAX expressed with max NDIV value */
/** table of ndiv values as a function of vINDEX (voltage index) */
uint16_t ndiv[80];
/** minimum allowed NDIV value */
uint16_t ndiv_min;
/** minimum allowed voltage hint value (as in vINDEX) */
uint16_t vfloor;
/** maximum allowed voltage hint value (as in vINDEX) */
uint16_t vceil;
/** post-multiplier for vindex value */
uint16_t vindex_mult;
/** post-divider for vindex value */
uint16_t vindex_div;
/** reserved for future use */
uint16_t reserved[328];
} BPMP_ABI_PACKED;
/** @} Vhint */
/** @endcond */
/**
* @ingroup MRQ_Codes
* @def MRQ_ABI_RATCHET
* @brief ABI ratchet value query
*
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_abi_ratchet_request
* * Response Payload: @ref mrq_abi_ratchet_response
* @addtogroup ABI_info
* @{
*/
/**
* @brief An ABI compatibility mechanism
*
* #BPMP_ABI_RATCHET_VALUE may increase for various reasons in a future
* revision of this header file.
* 1. That future revision deprecates some MRQ
* 2. That future revision introduces a breaking change to an existing
* MRQ or
* 3. A bug is discovered in an existing implementation of the BPMP-FW
* (or possibly one of its clients) which warrants deprecating that
* implementation.
*/
#define BPMP_ABI_RATCHET_VALUE 3
/**
* @brief Request with #MRQ_ABI_RATCHET.
*
* #ratchet should be #BPMP_ABI_RATCHET_VALUE from the ABI header
* against which the requester was compiled.
*
* If ratchet is less than BPMP's #BPMP_ABI_RATCHET_VALUE, BPMP may
* reply with mrq_response::err = -#BPMP_ERANGE to indicate that
* BPMP-FW cannot interoperate correctly with the requester. Requester
* should cease further communication with BPMP.
*
* Otherwise, err shall be 0.
*/
struct mrq_abi_ratchet_request {
/** @brief Requester's ratchet value */
uint16_t ratchet;
};
/**
* @brief Response to #MRQ_ABI_RATCHET
*
* #ratchet shall be #BPMP_ABI_RATCHET_VALUE from the ABI header
* against which BPMP firwmare was compiled.
*
* If #ratchet is less than the requester's #BPMP_ABI_RATCHET_VALUE,
* the requster must either interoperate with BPMP according to an ABI
* header version with #BPMP_ABI_RATCHET_VALUE = ratchet or cease
* communication with BPMP.
*
* If mrq_response::err is 0 and ratchet is greater than or equal to the
* requester's #BPMP_ABI_RATCHET_VALUE, the requester should continue
* normal operation.
*/
struct mrq_abi_ratchet_response {
/** @brief BPMP's ratchet value */
uint16_t ratchet;
};
/** @} ABI_info */
/**
* @ingroup MRQ_Codes
* @def MRQ_EMC_DVFS_LATENCY
* @brief Query frequency dependent EMC DVFS latency
*
* On T264 and onwards, this MRQ service is available only when
* BPMP-FW has valid DRAM timing table passed by earlier boot stages.
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
* * Response Payload: @ref mrq_emc_dvfs_latency_response
* @addtogroup EMC
* @{
*/
/**
* @brief Used by @ref mrq_emc_dvfs_latency_response
*/
struct emc_dvfs_latency {
/** @brief EMC DVFS node frequency in kHz */
uint32_t freq;
/** @brief EMC DVFS latency in nanoseconds */
uint32_t latency;
} BPMP_ABI_PACKED;
#define EMC_DVFS_LATENCY_MAX_SIZE 14
/**
* @brief Response to #MRQ_EMC_DVFS_LATENCY
*/
struct mrq_emc_dvfs_latency_response {
/**
* @brief The number valid entries in #pairs
*
* Valid range is [0, #EMC_DVFS_LATENCY_MAX_SIZE]
*/
uint32_t num_pairs;
/** @brief EMC DVFS node <frequency, latency> information */
struct emc_dvfs_latency pairs[EMC_DVFS_LATENCY_MAX_SIZE];
} BPMP_ABI_PACKED;
/** @} EMC */
/** @cond (bpmp_t234)
* @ingroup MRQ_Codes
* @def MRQ_EMC_DVFS_EMCHUB
* @brief Query EMC HUB frequencies
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
* * Response Payload: @ref mrq_emc_dvfs_emchub_response
* @addtogroup EMC
* @{
*/
/**
* @brief Used by @ref mrq_emc_dvfs_emchub_response
*/
struct emc_dvfs_emchub {
/** @brief EMC DVFS node frequency in kHz */
uint32_t freq;
/** @brief EMC HUB frequency in kHz */
uint32_t hub_freq;
} BPMP_ABI_PACKED;
#define EMC_DVFS_EMCHUB_MAX_SIZE EMC_DVFS_LATENCY_MAX_SIZE
/**
* @brief Response to #MRQ_EMC_DVFS_EMCHUB
*/
struct mrq_emc_dvfs_emchub_response {
/** @brief The number valid entries in #pairs */
uint32_t num_pairs;
/** @brief EMC DVFS node <frequency, hub frequency> information */
struct emc_dvfs_emchub pairs[EMC_DVFS_EMCHUB_MAX_SIZE];
} BPMP_ABI_PACKED;
/** @} EMC */
/** @endcond */
/** @cond (bpmp_t234)
* @ingroup MRQ_Codes
* @def MRQ_EMC_DISP_RFL
* @brief Set EMC display RFL handshake mode of operations
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_emc_disp_rfl_request
* * Response Payload: N/A
*
* @addtogroup EMC
* @{
*/
/**
* @brief Allowed mode values for the mrq_emc_disp_rfl_request::mode -field.
*/
enum mrq_emc_disp_rfl_mode {
/** @brief EMC display RFL handshake disabled */
EMC_DISP_RFL_MODE_DISABLED = 0,
/** @brief EMC display RFL handshake enabled */
EMC_DISP_RFL_MODE_ENABLED = 1,
};
/**
* @ingroup EMC
* @brief Request with #MRQ_EMC_DISP_RFL
*
* Used by the sender of an #MRQ_EMC_DISP_RFL message to
* request the mode of EMC display RFL handshake.
*
* mrq_response::err for this request is defined as:
*
* | Value | Description |
* | -------------- | --------------------------------------------- |
* | 0 | RFL mode is set successfully. |
* | -#BPMP_EINVAL | Invalid mode requested. |
* | -#BPMP_ENOSYS | RFL handshake is not supported. |
* | -#BPMP_EACCES | Permission denied. |
* | -#BPMP_ENODEV | if disp rfl mrq is not supported by BPMP-FW. |
*/
struct mrq_emc_disp_rfl_request {
/** @brief EMC display RFL mode from @ref mrq_emc_disp_rfl_mode */
uint32_t mode;
} BPMP_ABI_PACKED;
/** @} EMC */
/** @endcond */
/** @cond (!bpmp_safe && (bpmp_t234 || bpmp_t238))
* @ingroup MRQ_Codes
* @def MRQ_BWMGR
* @brief Bandwidth manager (BWMGR) commands
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_bwmgr_request
* * Response Payload: @ref mrq_bwmgr_response
*
* @addtogroup BWMGR
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_BWMGR
*/
enum mrq_bwmgr_cmd {
/**
* @brief Check whether BPMP-FW supports the specified
* #MRQ_BWMGR sub-command.
*
* mrq_response::err is defined to be:
*
* | Value | Description
* |----------------|----------------------------
* | 0 | Specified sub-command is supported.
* | -#BPMP_ENODEV | Specified sub-command is not supported.
*/
CMD_BWMGR_QUERY_ABI = 0,
/**
* @brief Determine DRAM rate to satisfy ISO/NISO bandwidth requests
*
* mrq_response::err is defined to be:
*
* | Value | Description
* |----------------|----------------------------
* | 0 | Rate calculation succeeded.
* | -#BPMP_EINVAL | Invalid request parameters.
* | -#BPMP_ENOTSUP | Requested bandwidth is not available.
* | <0 | Any other internal error.
*/
CMD_BWMGR_CALC_RATE = 1
};
/**
* @brief Request payload for #MRQ_BWMGR sub-command #CMD_BWMGR_QUERY_ABI
*/
struct cmd_bwmgr_query_abi_request {
/** @brief Sub-command identifier from @ref mrq_bwmgr_cmd. */
uint32_t type;
} BPMP_ABI_PACKED;
/**
* @brief Used by @ref cmd_bwmgr_calc_rate_request
*/
struct iso_req {
/** @brief BWMGR client ID from @ref bpmp_bwmgr_ids */
uint32_t id;
/** @brief Bandwidth in kBps requested by client */
uint32_t iso_bw;
} BPMP_ABI_PACKED;
/**
* @brief Size of the cmd_bwmgr_calc_rate_request::isobw_reqs -array.
*/
#define MAX_ISO_CLIENTS 13U
/**
* @brief Request payload for #MRQ_BWMGR sub-command #CMD_BWMGR_CALC_RATE
*/
struct cmd_bwmgr_calc_rate_request {
/** @brief Total bandwidth in kBps requested by all NISO clients. */
uint32_t sum_niso_bw;
/** @brief The number of ISO client requests in #isobw_reqs -array */
uint32_t num_iso_clients;
/** @brief iso_req <id, iso_bw> information */
struct iso_req isobw_reqs[MAX_ISO_CLIENTS];
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_BWMGR sub-command #CMD_BWMGR_CALC_RATE
*/
struct cmd_bwmgr_calc_rate_response {
/**
* @brief Minimum DRAM data clock rate in kHz to satisfy all ISO client
* bandwidth requests.
*/
uint32_t iso_rate_min;
/**
* @brief Minimum DRAM data clock rate in kHz to satisfy all
* bandwidth requests.
*/
uint32_t total_rate_min;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for the #MRQ_BWMGR -command.
*
* |Sub-command |Payload |
* |----------------------|-----------------------------|
* |#CMD_BWMGR_QUERY_ABI |#cmd_bwmgr_query_abi_request |
* |#CMD_BWMGR_CALC_RATE |#cmd_bwmgr_calc_rate_request |
*/
struct mrq_bwmgr_request {
/** @brief Sub-command identifier from @ref mrq_bwmgr_cmd. */
uint32_t cmd;
union {
struct cmd_bwmgr_query_abi_request query_abi;
struct cmd_bwmgr_calc_rate_request bwmgr_rate_req;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for the #MRQ_BWMGR -command.
*
* |Sub-command |Payload |
* |----------------------|------------------------------|
* |#CMD_BWMGR_CALC_RATE |#cmd_bwmgr_calc_rate_response |
*/
struct mrq_bwmgr_response {
union {
struct cmd_bwmgr_calc_rate_response bwmgr_rate_resp;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} BWMGR */
/** @endcond */
/** @cond (!bpmp_safe && (bpmp_t234 || bpmp_t238 || bpmp_t264))
* @ingroup MRQ_Codes
* @def MRQ_BWMGR_INT
* @brief BPMP-FW integrated BWMGR requests
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_bwmgr_int_request
* * Response Payload: @ref mrq_bwmgr_int_response
*
* @addtogroup BWMGR_INT
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_BWMGR_INT
*/
enum mrq_bwmgr_int_cmd {
/**
* @brief Check whether the BPMP-FW supports the specified
* sub-command.
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_BWMGR_INT_QUERY_ABI = 1,
/**
* @brief Determine and set DRAM rate to satisfy ISO/NISO bandwidth requests.
*
* mrq_response::err is defined as:
*
* |Value |Description |
* |-----------------|----------------------------------------------------------------------------------------------------------------|
* |0 |Request succeeded. |
* |-#BPMP_EINVAL |Invalid request parameters, cmd_bwmgr_int_calc_and_set_response::rate is not set. |
* |-#BPMP_ENOTSUP |Requested bandwidth is not available, cmd_bwmgr_int_calc_and_set_response::rate is the current DRAM clock rate. |
* |<0 |Any other internal error. |
*/
CMD_BWMGR_INT_CALC_AND_SET = 2,
/**
* @brief Set a max DRAM frequency for the bandwidth manager.
*
* mrq_response::err is defined as:
*
* |Value |Description |
* |-----------------|------------------------------------------|
* |0 |Request succeeded. |
* |-#BPMP_ENOTSUP |Requested cap frequency is not possible. |
* |<0 |Any other internal error. |
*/
CMD_BWMGR_INT_CAP_SET = 3,
/**
* @brief Obtain the maximum amount of bandwidth currently allocatable
* to the requesting client.
*
* mrq_response::err is defined as:
*
* |Value |Description |
* |-----------------|------------------------------------------|
* |0 |Request succeeded. |
* |-#BPMP_EINVAL |Invalid request parameters. |
* |<0 |Any other internal error. |
*/
CMD_BWMGR_INT_CURR_AVAILABLE_BW = 4,
/**
* @brief Get the last request made by the client.
*
* mrq_response::err is defined as:
*
* |Value |Description |
* |-----------------|------------------------------------------|
* |0 |Request succeeded. |
* |-#BPMP_EINVAL |Invalid request parameters. |
* |<0 |Any other internal error. |
*/
CMD_BWMGR_INT_GET_LAST_REQUEST = 5,
};
/**
* @brief Request payload for #MRQ_BWMGR_INT sub-command #CMD_BWMGR_INT_QUERY_ABI
*/
struct cmd_bwmgr_int_query_abi_request {
/** @brief Sub-command identifier from @ref mrq_bwmgr_int_cmd. */
uint32_t type;
} BPMP_ABI_PACKED;
/**
* @defgroup bwmgr_int_unit_type BWMGR_INT floor unit-types
* @addtogroup bwmgr_int_unit_type
* @{
*/
/** @brief kilobytes per second unit-type */
#define BWMGR_INT_UNIT_KBPS 0U
/** @brief kilohertz unit-type */
#define BWMGR_INT_UNIT_KHZ 1U
/** @} bwmgr_int_unit_type */
/**
* @brief Request payload for #MRQ_BWMGR_INT sub-command #CMD_BWMGR_INT_CALC_AND_SET
*/
struct cmd_bwmgr_int_calc_and_set_request {
/** @brief BWGMR client ID from @ref bpmp_bwmgr_ids */
uint32_t client_id;
/** @brief Average NISO bandwidth usage in kBps requested by client. */
uint32_t niso_bw;
/**
* @brief Average ISO bandwidth usage in kBps requested by client.
*
* Value is ignored if client is NISO as determined by #client_id.
*/
uint32_t iso_bw;
/**
* @brief Memory clock floor requested by client, unit of the value
* is determined by #floor_unit -field.
*/
uint32_t mc_floor;
/**
* @brief Value set to determine the unit of the #mc_floor value:
*
* | Value | Unit |
* |-----------------------|----------------------|
* | #BWMGR_INT_UNIT_KBPS | Kilobytes per second |
* | #BWMGR_INT_UNIT_KHZ | Kilohertz |
*/
uint8_t floor_unit;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_BWMGR_INT sub-command #CMD_BWMGR_INT_CALC_AND_SET
*/
struct cmd_bwmgr_int_calc_and_set_response {
/** @brief Currently set memory clock frequency in Hz */
uint64_t rate;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_BWMGR_INT sub-command #CMD_BWMGR_INT_CAP_SET
*/
struct cmd_bwmgr_int_cap_set_request {
/** @brief Requested cap frequency in Hz. */
uint64_t rate;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_BWMGR_INT sub-command #CMD_BWMGR_INT_CURR_AVAILABLE_BW
*/
struct cmd_bwmgr_int_curr_available_bw_request {
/** @brief BWMGR client ID from @ref bpmp_bwmgr_ids */
uint32_t id;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_BWMGR_INT sub-command #CMD_BWMGR_INT_CURR_AVAILABLE_BW
*/
struct cmd_bwmgr_int_curr_available_bw_response {
/** @brief Current cap frequency in KHz. */
uint64_t cap_rate;
/** @brief Currently available bandwidth for the requesting client
* to allocate in KBps.
*/
uint64_t available_bw;
} BPMP_ABI_PACKED;
struct cmd_bwmgr_int_get_last_request_request {
/** @brief BWMGR client ID from @ref bpmp_bwmgr_ids */
uint32_t id;
/**
* @brief Value set to determine the unit of the returned mc_floor value:
*
* | Value | Unit |
* |-----------------------|----------------------|
* | #BWMGR_INT_UNIT_KBPS | Kilobytes per second |
* | #BWMGR_INT_UNIT_KHZ | Kilohertz |
*/
uint8_t floor_unit;
} BPMP_ABI_PACKED;
struct cmd_bwmgr_int_get_last_request_response {
/** @brief BWGMR client ID from @ref bpmp_bwmgr_ids */
uint32_t client_id;
/** @brief Average NISO bandwidth usage in kBps requested by client. */
uint32_t niso_bw;
/**
* @brief Average ISO bandwidth usage in kBps requested by client.
*/
uint32_t iso_bw;
/**
* @brief Memory clock floor requested by client, unit of the value
* is determined by #floor_unit -field.
*/
uint32_t mc_floor;
/**
* @brief Value set to determine the unit of the #mc_floor value:
*
* | Value | Unit |
* |-----------------------|----------------------|
* | #BWMGR_INT_UNIT_KBPS | Kilobytes per second |
* | #BWMGR_INT_UNIT_KHZ | Kilohertz |
*/
uint8_t floor_unit;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for the #MRQ_BWMGR_INT -command.
*
* |Sub-command |Payload |
* |---------------------------------|-----------------------------------------|
* |#CMD_BWMGR_INT_QUERY_ABI |#cmd_bwmgr_int_query_abi_request |
* |#CMD_BWMGR_INT_CALC_AND_SET |#cmd_bwmgr_int_calc_and_set_request |
* |#CMD_BWMGR_INT_CAP_SET |#cmd_bwmgr_int_cap_set_request |
* |#CMD_BWMGR_INT_GET_LAST_REQUEST |#cmd_bwmgr_int_get_last_request_request |
*
* The following additional sub-commands are supported on T264 platforms:
*
* |Sub-command |Payload |
* |---------------------------------|-----------------------------------------|
* |#CMD_BWMGR_INT_CURR_AVAILABLE_BW |#cmd_bwmgr_int_curr_available_bw_request |
*/
struct mrq_bwmgr_int_request {
/** @brief Sub-command identifier from @ref mrq_bwmgr_int_cmd. */
uint32_t cmd;
union {
struct cmd_bwmgr_int_query_abi_request query_abi;
struct cmd_bwmgr_int_calc_and_set_request bwmgr_calc_set_req;
struct cmd_bwmgr_int_cap_set_request bwmgr_cap_set_req;
struct cmd_bwmgr_int_curr_available_bw_request bwmgr_curr_available_bw_req;
struct cmd_bwmgr_int_get_last_request_request bwmgr_get_last_request_req;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for the #MRQ_BWMGR_INT -command.
*
* |Sub-command |Payload |
* |---------------------------------|------------------------------------------|
* |#CMD_BWMGR_INT_CALC_AND_SET |#cmd_bwmgr_int_calc_and_set_response |
* |#CMD_BWMGR_INT_GET_LAST_REQUEST |#cmd_bwmgr_int_get_last_request_response |
*
* The following additional sub-commands are supported on T264 platforms:
* |Sub-command |Payload |
* |---------------------------------|------------------------------------------|
* |#CMD_BWMGR_INT_CURR_AVAILABLE_BW |#cmd_bwmgr_int_curr_available_bw_response |
*/
struct mrq_bwmgr_int_response {
union {
struct cmd_bwmgr_int_calc_and_set_response bwmgr_calc_set_resp;
struct cmd_bwmgr_int_curr_available_bw_response bwmgr_curr_available_bw_resp;
struct cmd_bwmgr_int_get_last_request_response bwmgr_get_last_request_resp;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} BWMGR_INT */
/** @endcond */
/** @cond (!bpmp_safe && (bpmp_t234 || bpmp_t238 || bpmp_t264))
* @ingroup MRQ_Codes
* @def MRQ_ISO_CLIENT
* @brief ISO client requests
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_iso_client_request
* * Response Payload: @ref mrq_iso_client_response
*
* @addtogroup ISO_CLIENT
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_ISO_CLIENT.
*/
enum mrq_iso_client_cmd {
/**
* @brief Check whether BPMP-FW supports a specified
* #MRQ_ISO_CLIENT sub-command.
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_ISO_CLIENT_QUERY_ABI = 0,
/**
* @brief Determine legal LA for ISO client.
*
* Without programming LA MC registers, calculate and ensure that
* a legal LA is possible for the ISO bandwidth requested by the
* ISO client.
*
* mrq_response::err for this sub-command is defined as:
*
* | Value | Description |
* |---------------|--------------------------------------------------------------|
* | 0 | Request successful and legal LA is possible. |
* | -#BPMP_EINVAL | Invalid request parameters. |
* | -#BPMP_EFAULT | Legal LA is not possible for client requested ISO bandwidth. |
* | <0 | Any other internal error. |
*/
CMD_ISO_CLIENT_CALCULATE_LA = 1,
/**
* @brief Set LA for ISO client.
*
* Calculate and program the LA/PTSA MC registers corresponding to the
* ISO client making the bandwidth request.
*
* mrq_response::err for this sub-command is defined as:
*
* | Value | Description |
* |---------------|----------------------------------------------|
* | 0 | Setting LA succeeded. |
* | -#BPMP_EINVAL | Invalid request parameters. |
* | -#BPMP_EFAULT | Failed to calculate or program MC registers. |
* | <0 | Any other internal error. |
*/
CMD_ISO_CLIENT_SET_LA = 2,
/**
* @brief Get maximum possible bandwidth for ISO client.
*
* mrq_response::err for this sub-command is defined as:
*
* | Value | Description |
* |---------------|----------------------------------------------|
* | 0 | Operation successful. |
* | -#BPMP_EINVAL | Invalid request parameters. |
* | <0 | Any other internal error. |
*/
CMD_ISO_CLIENT_GET_MAX_BW = 3
};
/**
* @brief Request payload for #MRQ_ISO_CLIENT sub-command #CMD_ISO_CLIENT_QUERY_ABI
*/
struct cmd_iso_client_query_abi_request {
/**
* @brief Sub-command identifier from @ref mrq_iso_client_cmd
* for which to check existence.
*/
uint32_t type;
} BPMP_ABI_PACKED;
/**
* @brief Request payload #MRQ_ISO_CLIENT sub-command #CMD_ISO_CLIENT_CALCULATE_LA
*/
struct cmd_iso_client_calculate_la_request {
/** @brief BWMGR client ID from @ref bpmp_bwmgr_ids */
uint32_t id;
/** @brief Bandwidth requested in kBps for the client specified in #id. */
uint32_t bw;
/**
* @brief Initial DRAM bandwidth floor in kBps for the ISO client specified in #id.
*
* ISO client will perform mempool allocation and DVFS buffering based
* on this value.
*/
uint32_t init_bw_floor;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_ISO_CLIENT sub-command #CMD_ISO_CLIENT_CALCULATE_LA
*/
struct cmd_iso_client_calculate_la_response {
/** @brief Minimum DRAM rate in kHz at which a legal LA is possible */
uint32_t la_rate_floor;
/**
* Minimum DRAM frequency in kHz required to satisfy this clients
* ISO bandwidth request, assuming all other ISO clients are inactive.
*/
uint32_t iso_client_only_rate;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_ISO_CLIENT sub-command #CMD_ISO_CLIENT_SET_LA
*/
struct cmd_iso_client_set_la_request {
/** @brief BMWGR client ID from @ref bpmp_bwmgr_ids */
uint32_t id;
/** @brief Bandwidth requested in kBps for the client specified in #id. */
uint32_t bw;
/**
* @brief Final DRAM bandwidth floor in kBps.
*
* Sometimes the initial cmd_iso_client_calculate_la_request::dram_bw_floor
* passed by ISO client may need to be updated by considering higher
* DRAM frequencies. This is the final DRAM bandwidth floor value used
* to calculate and program MC registers.
*/
uint32_t final_bw_floor;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_ISO_CLIENT sub-command #CMD_ISO_CLIENT_GET_MAX_BW
*/
struct cmd_iso_client_get_max_bw_request {
/** @brief BWMGR client ID from @ref bpmp_bwmgr_ids */
uint32_t id;
} BPMP_ABI_PACKED;
/**
* @brief Used by @ref cmd_iso_client_get_max_bw_response
*/
struct iso_max_bw {
/** @brief dram frequency in kHz */
uint32_t freq;
/** @brief max possible iso-bw in kBps */
uint32_t iso_bw;
} BPMP_ABI_PACKED;
/**
* @brief Size of the cmd_iso_client_get_max_bw_response::pairs -array.
*/
#define ISO_MAX_BW_MAX_SIZE 14U
/**
* @brief Response payload for #MRQ_ISO_CLIENT sub-command #CMD_ISO_CLIENT_GET_MAX_BW
*/
struct cmd_iso_client_get_max_bw_response {
/** @brief The number valid entries in iso_max_bw pairs */
uint32_t num_pairs;
/** @brief max ISOBW <dram freq, max bw> information */
struct iso_max_bw pairs[ISO_MAX_BW_MAX_SIZE];
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_ISO_CLIENT command.
*
* Each #MRQ_ISO_CLIENT -command is expected to include a sub-command specific
* payload as defined in table below:
*
* |Sub-command |Request payload |
* |-----------------------------|--------------------------------------|
* |#CMD_ISO_CLIENT_QUERY_ABI |#cmd_iso_client_query_abi_request |
* |#CMD_ISO_CLIENT_CALCULATE_LA |#cmd_iso_client_calculate_la_request |
* |#CMD_ISO_CLIENT_SET_LA |#cmd_iso_client_set_la_request |
* |#CMD_ISO_CLIENT_GET_MAX_BW |#cmd_iso_client_get_max_bw_request |
*/
struct mrq_iso_client_request {
/** @brief Sub-command identifier from @ref mrq_iso_client_cmd. */
uint32_t cmd;
union {
struct cmd_iso_client_query_abi_request query_abi;
struct cmd_iso_client_calculate_la_request calculate_la_req;
struct cmd_iso_client_set_la_request set_la_req;
struct cmd_iso_client_get_max_bw_request max_isobw_req;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_ISO_CLIENT command.
*
* Some of the sub-commands supported by #MRQ_ISO_CLIENT may return
* a sub-command -specific payload in the MRQ response as defined in table
* below:
*
* |Sub-command |Response payload |
* |---------------------------- |--------------------------------------|
* |#CMD_ISO_CLIENT_QUERY_ABI |- |
* |#CMD_ISO_CLIENT_CALCULATE_LA |#cmd_iso_client_calculate_la_response |
* |#CMD_ISO_CLIENT_SET_LA |- |
* |#CMD_ISO_CLIENT_GET_MAX_BW |#cmd_iso_client_get_max_bw_response |
*
*/
struct mrq_iso_client_response {
union {
struct cmd_iso_client_calculate_la_response calculate_la_resp;
struct cmd_iso_client_get_max_bw_response max_isobw_resp;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} ISO_CLIENT */
/** @endcond */
/** @cond (!bpmp_t186)
* @ingroup MRQ_Codes
* @def MRQ_CPU_NDIV_LIMITS
* @brief Return CPU cluster NDIV limits
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_cpu_ndiv_limits_request
* * Response Payload: @ref mrq_cpu_ndiv_limits_response
* @addtogroup CPU
* @{
*/
/**
* @brief Request payload for the #MRQ_CPU_NDIV_LIMITS -command
*/
struct mrq_cpu_ndiv_limits_request {
/** @brief Logical CPU cluster identifier */
uint32_t cluster_id;
} BPMP_ABI_PACKED;
/**
* @brief Response to #MRQ_CPU_NDIV_LIMITS
*/
struct mrq_cpu_ndiv_limits_response {
/** @brief Reference frequency in Hz */
uint32_t ref_clk_hz;
/** @brief Post divider value */
uint16_t pdiv;
/** @brief Input divider value */
uint16_t mdiv;
/** @brief FMAX expressed with max NDIV value */
uint16_t ndiv_max;
/** @brief Minimum allowed NDIV value */
uint16_t ndiv_min;
} BPMP_ABI_PACKED;
/** @} CPU */
/** @endcond */
/** @cond (bpmp_t194)
* @ingroup MRQ_Codes
* @def MRQ_CPU_AUTO_CC3
* @brief Query CPU cluster auto-CC3 configuration
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_cpu_auto_cc3_request
* * Response Payload: @ref mrq_cpu_auto_cc3_response
* @addtogroup CC3
*
* Queries from BPMP auto-CC3 configuration (allowed/not allowed) for a
* specified cluster. CCPLEX s/w uses this information to override its own
* device tree auto-CC3 settings, so that BPMP device tree is a single source of
* auto-CC3 platform configuration.
*
* @{
*/
/**
* @brief Request payload for the #MRQ_CPU_AUTO_CC3 -command
*/
struct mrq_cpu_auto_cc3_request {
/** @brief Logical CPU cluster ID */
uint32_t cluster_id;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for the #MRQ_CPU_AUTO_CC3 -command
*/
struct mrq_cpu_auto_cc3_response {
/**
* @brief auto-CC3 configuration
*
* - bits[31..10] reserved.
* - bits[9..1] cc3 ndiv
* - bit [0] if "1" auto-CC3 is allowed, if "0" auto-CC3 is not allowed
*/
uint32_t auto_cc3_config;
} BPMP_ABI_PACKED;
/** @} CC3 */
/** @endcond */
/** @cond (bpmp_t186 || bpmp_t194 || bpmp_t234)
* @ingroup MRQ_Codes
* @def MRQ_RINGBUF_CONSOLE
* @brief A ring buffer debug console for BPMP
* @addtogroup RingbufConsole
*
* The ring buffer debug console aims to be a substitute for the UART debug
* console. The debug console is implemented with two ring buffers in the
* BPMP-FW, the RX (receive) and TX (transmit) buffers. Characters can be read
* and written to the buffers by the host via the MRQ interface.
*
* @{
*/
/**
* @brief Maximum number of bytes transferred in a single write command to the
* BPMP
*
* This is determined by the number of free bytes in the message struct,
* rounded down to a multiple of four.
*/
#define MRQ_RINGBUF_CONSOLE_MAX_WRITE_LEN 112
/**
* @brief Maximum number of bytes transferred in a single read command to the
* BPMP
*
* This is determined by the number of free bytes in the message struct,
* rounded down to a multiple of four.
*/
#define MRQ_RINGBUF_CONSOLE_MAX_READ_LEN 116
enum mrq_ringbuf_console_host_to_bpmp_cmd {
/**
* @brief Check whether the BPMP driver supports the specified request
* type
*
* mrq_response::err is 0 if the specified request is supported and
* -#BPMP_ENODEV otherwise
*/
CMD_RINGBUF_CONSOLE_QUERY_ABI = 0,
/**
* @brief Perform a read operation on the BPMP TX buffer
*
* mrq_response::err is 0
*/
CMD_RINGBUF_CONSOLE_READ = 1,
/**
* @brief Perform a write operation on the BPMP RX buffer
*
* mrq_response::err is 0 if the operation was successful and
* -#BPMP_ENODEV otherwise
*/
CMD_RINGBUF_CONSOLE_WRITE = 2,
/**
* @brief Get the length of the buffer and the physical addresses of
* the buffer data and the head and tail counters
*
* mrq_response::err is 0 if the operation was successful and
* -#BPMP_ENODEV otherwise
*/
CMD_RINGBUF_CONSOLE_GET_FIFO = 3,
};
/**
* @ingroup RingbufConsole
* @brief Host->BPMP request data for request type
* #CMD_RINGBUF_CONSOLE_QUERY_ABI
*/
struct cmd_ringbuf_console_query_abi_req {
/** @brief Command identifier to be queried */
uint32_t cmd;
} BPMP_ABI_PACKED;
/** @private */
struct cmd_ringbuf_console_query_abi_resp {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief Host->BPMP request data for request type #CMD_RINGBUF_CONSOLE_READ
*/
struct cmd_ringbuf_console_read_req {
/**
* @brief Number of bytes requested to be read from the BPMP TX buffer.
*
* Valid range is [0, #MRQ_RINGBUF_CONSOLE_MAX_READ_LEN]
*/
uint8_t len;
} BPMP_ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief BPMP->Host response data for request type #CMD_RINGBUF_CONSOLE_READ
*/
struct cmd_ringbuf_console_read_resp {
/** @brief The actual data read from the BPMP TX buffer */
uint8_t data[MRQ_RINGBUF_CONSOLE_MAX_READ_LEN];
/**
* @brief Number of bytes in cmd_ringbuf_console_read_resp::data
*
* Valid range is [0, #MRQ_RINGBUF_CONSOLE_MAX_WRITE_LEN]
*/
uint8_t len;
} BPMP_ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief Host->BPMP request data for request type #CMD_RINGBUF_CONSOLE_WRITE
*/
struct cmd_ringbuf_console_write_req {
/** @brief The actual data to be written to the BPMP RX buffer */
uint8_t data[MRQ_RINGBUF_CONSOLE_MAX_WRITE_LEN];
/** @brief Number of bytes in cmd_ringbuf_console_write_req::data */
uint8_t len;
} BPMP_ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief BPMP->Host response data for request type #CMD_RINGBUF_CONSOLE_WRITE
*/
struct cmd_ringbuf_console_write_resp {
/** @brief Number of bytes of available space in the BPMP RX buffer */
uint32_t space_avail;
/** @brief Number of bytes that were written to the BPMP RX buffer */
uint8_t len;
} BPMP_ABI_PACKED;
/** @private */
struct cmd_ringbuf_console_get_fifo_req {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief BPMP->Host reply data for request type #CMD_RINGBUF_CONSOLE_GET_FIFO
*/
struct cmd_ringbuf_console_get_fifo_resp {
/** @brief Physical address of the BPMP TX buffer */
uint64_t bpmp_tx_buf_addr;
/** @brief Physical address of the BPMP TX buffer head counter */
uint64_t bpmp_tx_head_addr;
/** @brief Physical address of the BPMP TX buffer tail counter */
uint64_t bpmp_tx_tail_addr;
/** @brief Length of the BPMP TX buffer */
uint32_t bpmp_tx_buf_len;
} BPMP_ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief Host->BPMP request data.
*
* Reply type is union #mrq_ringbuf_console_bpmp_to_host_response .
*/
struct mrq_ringbuf_console_host_to_bpmp_request {
/**
* @brief Type of request. Values listed in enum
* #mrq_ringbuf_console_host_to_bpmp_cmd.
*/
uint32_t type;
/** @brief request type specific parameters. */
union {
struct cmd_ringbuf_console_query_abi_req query_abi;
struct cmd_ringbuf_console_read_req read;
struct cmd_ringbuf_console_write_req write;
struct cmd_ringbuf_console_get_fifo_req get_fifo;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup RingbufConsole
* @brief Host->BPMP reply data
*
* In response to struct #mrq_ringbuf_console_host_to_bpmp_request.
*/
union mrq_ringbuf_console_bpmp_to_host_response {
struct cmd_ringbuf_console_query_abi_resp query_abi;
struct cmd_ringbuf_console_read_resp read;
struct cmd_ringbuf_console_write_resp write;
struct cmd_ringbuf_console_get_fifo_resp get_fifo;
} BPMP_ABI_PACKED;
/** @} RingbufConsole */
/** @endcond */
/** @cond (!bpmp_t186 && !(bpmp_safe && bpmp_t234))
* @ingroup MRQ_Codes
* @def MRQ_STRAP
* @brief Set a strap value controlled by BPMP
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_strap_request
* * Response Payload: N/A
* @addtogroup Strap
*
* A strap is an input that is sampled by a hardware unit during the
* unit's startup process. The sampled value of a strap affects the
* behavior of the unit until the unit is restarted. Many hardware
* units sample their straps at the instant that their resets are
* deasserted.
*
* BPMP owns registers which act as straps to various units. It
* exposes limited control of those registers via #MRQ_STRAP.
*
* @{
*/
/**
* @brief Sub-command identifiers for the #MRQ_STRAP -command.
*/
enum mrq_strap_cmd {
/** @private */
STRAP_RESERVED = 0,
/** @brief Set a strap value */
STRAP_SET = 1
};
/**
* @brief Request payload for the #MRQ_STRAP -command.
*/
struct mrq_strap_request {
/** @brief Sub-command identifier from @ref mrq_strap_cmd */
uint32_t cmd;
/**
* @if (bpmp_t234 || bpmp_th500 || bpmp_t264)
* @brief Strap ID from @ref bpmp_strap_ids
* @else
* @brief Strap ID (undefined)
* @endif
*/
uint32_t id;
/** @brief Desired value for strap (if #cmd is #STRAP_SET) */
uint32_t value;
} BPMP_ABI_PACKED;
/** @} Strap */
/** @endcond */
/** @cond (bpmp_t194 || bpmp_t234 || bpmp_th500)
* @ingroup MRQ_Codes
* @def MRQ_UPHY
* @brief Perform a UPHY operation
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_uphy_request
* * Response Payload: @ref mrq_uphy_response
*
* @addtogroup UPHY
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_UPHY.
*/
enum mrq_uphy_cmd {
/** @brief Trigger PCIE lane margining procedure. */
CMD_UPHY_PCIE_LANE_MARGIN_CONTROL = 1,
/** @brief Return PCIE lane margining status. */
CMD_UPHY_PCIE_LANE_MARGIN_STATUS = 2,
/** @brief Initialize PCIE EP PLL controller. */
CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT = 3,
/** @brief Set state of the PCIE RP/EP controller. */
CMD_UPHY_PCIE_CONTROLLER_STATE = 4,
/** @brief Disable PCIE EP PLL controller. */
CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF = 5,
/**
* @cond bpmp_t238
* @brief Initialize and enable UPHY display port.
*/
CMD_UPHY_DISPLAY_PORT_INIT = 6,
/** @brief Disable UPHY display port. */
CMD_UPHY_DISPLAY_PORT_OFF = 7,
/** @brief Trigger sequence to restore XUSB DYN lanes during SC7 exit. */
CMD_UPHY_XUSB_DYN_LANES_RESTORE = 8,
/** @endcond */
/**
* @cond bpmp_th500
* @brief Perform UPHY Lane EOM scan.
*/
CMD_UPHY_LANE_EOM_SCAN = 9,
/** @brief Config PCIe VDM with a given BDF ID. */
CMD_UPHY_PCIE_CONFIG_VDM = 10,
/** @endcond */
CMD_UPHY_MAX,
};
/**
* @brief Request payload for #MRQ_UPHY sub-command #CMD_UPHY_PCIE_LANE_MARGIN_CONTROL.
*/
struct cmd_uphy_margin_control_request {
/**
* @brief Enable margin.
*
* Valid values:
* * Value 0 disables margin,
* * Value 1 enables margin.
*/
int32_t en;
/**
* @brief Clear the number of error and sections.
*
* Valid values:
*
* * Value 0: Skip clear,
* * Value 1: Perform clear.
*/
int32_t clr;
/**
* @brief Set x offset (1's complement) for left/right margin type (y should be 0).
*
* Valid range is [0, 127]
*/
uint32_t x;
/**
* @brief Set y offset (1's complement) for left/right margin type (x should be 0)
*
* Valid range is [0, 63]
*/
uint32_t y;
/**
* @brief Set number of bit blocks for each margin section.
*
* Valid range is [0, 15]
*/
uint32_t nblks;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_UPHY sub-command #CMD_UPHY_PCIE_LANE_MARGIN_STATUS.
*/
struct cmd_uphy_margin_status_response {
/** @brief Number of errors observed */
uint32_t status;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_UPHY sub-command #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT.
*/
struct cmd_uphy_ep_controller_pll_init_request {
/** @brief EP controller number, T194 valid: 0, 4, 5; T234 valid: 5, 6, 7, 10; T238 valid: 0 */
uint8_t ep_controller;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_UPHY sub-command #CMD_UPHY_PCIE_CONTROLLER_STATE.
*/
struct cmd_uphy_pcie_controller_state_request {
/** @brief PCIE controller number, T194 valid: 0-4; T234 valid: 0-10; T238 valid: 0-3 */
uint8_t pcie_controller;
/** @brief Nonzero value to enable controller, zero value to disable */
uint8_t enable;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_UPHY sub-command #CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF.
*/
struct cmd_uphy_ep_controller_pll_off_request {
/** @brief EP controller number, T194 valid: 0, 4, 5; T234 valid: 5, 6, 7, 10; T238 valid: 0 */
uint8_t ep_controller;
} BPMP_ABI_PACKED;
/**
* @cond bpmp_t238
* @brief Request payload for #MRQ_UPHY sub-command #CMD_UPHY_DISPLAY_PORT_INIT.
*/
struct cmd_uphy_display_port_init_request {
/** @brief DisplayPort link rate, T238 valid: 1620, 2700, 5400, 8100, 2160, 2430, 3240, 4320, 6750 */
uint16_t link_rate;
/** @brief 1: lane 0; 2: lane 1; 3: lane 0 and 1 */
uint16_t lanes_bitmap;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_UPHY sub-command #CMD_UPHY_XUSB_DYN_LANES_RESTORE.
*/
struct cmd_uphy_xusb_dyn_lanes_restore_request {
/** @brief 1: lane 0; 2: lane 1; 3: lane 0 and 1 */
uint16_t lanes_bitmap;
} BPMP_ABI_PACKED;
/** @endcond */
/**
* @cond bpmp_th500
* @brief Request payload for #MRQ_UPHY sub-command #CMD_UPHY_LANE_EOM_SCAN
*/
struct cmd_uphy_lane_eom_scan_request {
/** @brief UPHY brick number, valid: 0-5 */
uint32_t brick;
/** @brief UPHY lane number, valid: 0-15 for UPHY0-UPHY3, 0-1 for UPHY4-UPHY5 */
uint32_t lane;
/** @brief Perform EOM for PCIE GEN5 link: 1 for yes, 0 for no. */
uint32_t pcie_gen5;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_UPHY sub-command #CMD_UPHY_LANE_EOM_SCAN
*/
struct cmd_uphy_lane_eom_scan_response {
uint32_t data;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_UPHY sub-command #CMD_UPHY_PCIE_CONFIG_VDM
*/
struct cmd_uphy_pcie_config_vdm_request {
uint8_t pcie_controller;
/**
* @brief Bus/Dev/Func ID to be programmed for VDM.
*
* - bits[15..8] Bus
* - bits[7..3] Dev
* - bit [2..0] Func
*/
uint16_t bdf;
} BPMP_ABI_PACKED;
/** @endcond */
/**
* @ingroup UPHY
* @brief Request payload for the #MRQ_UPHY -command.
*
* Used by the sender of an #MRQ_UPHY message to control UPHY.
* The uphy_request is split into several sub-commands. CMD_UPHY_PCIE_LANE_MARGIN_STATUS
* requires no additional data. Others have a sub-command specific payload. Below table
* shows sub-commands with their corresponding payload data.
*
* |sub-command |payload |
* |--------------------------------------|-----------------------------------------|
* |#CMD_UPHY_PCIE_LANE_MARGIN_CONTROL |#cmd_uphy_margin_control_request |
* |#CMD_UPHY_PCIE_LANE_MARGIN_STATUS |- |
* |#CMD_UPHY_PCIE_EP_CONTROLLER_PLL_INIT |#cmd_uphy_ep_controller_pll_init_request |
* |#CMD_UPHY_PCIE_CONTROLLER_STATE |#cmd_uphy_pcie_controller_state_request |
* |#CMD_UPHY_PCIE_EP_CONTROLLER_PLL_OFF |#cmd_uphy_ep_controller_pll_off_request |
*
* @cond bpmp_t238
* The following additional sub-commands are supported on T238 platforms:
*
* |sub-command |payload |
* |--------------------------------------|-----------------------------------------|
* |#CMD_UPHY_DISPLAY_PORT_INIT |#cmd_uphy_display_port_init_request |
* |#CMD_UPHY_DISPLAY_PORT_OFF |- |
* |#CMD_UPHY_XUSB_DYN_LANES_RESTORE |#cmd_uphy_xusb_dyn_lanes_restore_request |
* @endcond
*
* @cond bpmp_th500
* The following additional sub-commands are supported on TH500 platforms:
* |sub-command |payload |
* |--------------------------------------|-----------------------------------------|
* |#CMD_UPHY_LANE_EOM_SCAN |#cmd_uphy_lane_eom_scan_request |
* |#CMD_UPHY_PCIE_CONFIG_VDM |#cmd_uphy_pcie_config_vdm_request |
* @endcond
*/
struct mrq_uphy_request {
/** @brief Lane number. */
uint16_t lane;
/** @brief Sub-command ID from @ref mrq_uphy_cmd. */
uint16_t cmd;
union {
struct cmd_uphy_margin_control_request uphy_set_margin_control;
struct cmd_uphy_ep_controller_pll_init_request ep_ctrlr_pll_init;
struct cmd_uphy_pcie_controller_state_request controller_state;
struct cmd_uphy_ep_controller_pll_off_request ep_ctrlr_pll_off;
/** @cond bpmp_t238 */
struct cmd_uphy_display_port_init_request display_port_init;
struct cmd_uphy_xusb_dyn_lanes_restore_request xusb_dyn_lanes_restore;
/** @endcond */
/** @cond bpmp_th500 */
struct cmd_uphy_lane_eom_scan_request lane_eom_scan;
struct cmd_uphy_pcie_config_vdm_request pcie_vdm;
/** @endcond */
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup UPHY
* @brief Response payload for the #MRQ_UPHY -command.
*
* Each sub-command supported by @ref mrq_uphy_request may return
* sub-command-specific data. Some do and some do not as indicated in
* the following table
*
* |sub-command |payload |
* |-----------------------------------|---------------------------------|
* |#CMD_UPHY_PCIE_LANE_MARGIN_CONTROL |- |
* |#CMD_UPHY_PCIE_LANE_MARGIN_STATUS |#cmd_uphy_margin_status_response |
*
* @cond bpmp_th500
* The following additional sub-commands are supported on TH500 platforms:
* |sub-command |payload |
* |-----------------------------------|---------------------------------|
* |#CMD_UPHY_LANE_EOM_SCAN |#cmd_uphy_lane_eom_scan_response |
* |#CMD_UPHY_PCIE_CONFIG_VDM |- |
* @endcond
*/
struct mrq_uphy_response {
union {
struct cmd_uphy_margin_status_response uphy_get_margin_status;
/** @cond bpmp_th500 */
struct cmd_uphy_lane_eom_scan_response eom_status;
/** @endcond */
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} UPHY */
/** @endcond */
/** @cond (bpmp_t194 || bpmp_t234 || bpmp_t238 || bpmp_t264)
* @ingroup MRQ_Codes
* @def MRQ_FMON
* @brief Perform a frequency monitor configuration operation
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_fmon_request
* * Response Payload: @ref mrq_fmon_response
*
* @addtogroup FMON
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_FMON
*/
enum mrq_fmon_cmd {
/**
* @brief Clamp FMON configuration to specified rate.
*
* The monitored clock must be running for clamp to succeed. If
* clamped, FMON configuration is preserved when clock rate
* and/or state is changed.
*
* mrq_response::err for this sub-command is defined to be:
*
* | Value | Description |
* |-------------------|---------------------------------------------------|
* | 0 | Operation was successful. |
* | -#BPMP_EBADCMD | Subcommand is not supported. |
* | -#BPMP_EACCES | FMON access error. |
* | -#BPMP_EBADSLT | Clamp FMON on cluster with auto-CC3 enabled. |
* | -#BPMP_EBUSY | FMON is already clamped at different rate. |
* | -#BPMP_EFAULT | Self-diagnostic error detected. |
* | -#BPMP_EINVAL | Invalid FMON configuration. |
* | -#BPMP_EOPNOTSUPP | Not in production mode. |
* | -#BPMP_ENODEV | Invalid clock ID in mrq_fmon_request::cmd_and_id. |
* | -#BPMP_ENOENT | No calibration data, uninitialized. |
* | -#BPMP_ENOTSUP | AVFS config not set. |
* | -#BPMP_ENOSYS | Clamp FMON on cluster clock w/ no NAFLL. |
* | -#BPMP_ETIMEDOUT | Operation timed out. |
*/
CMD_FMON_GEAR_CLAMP = 1,
/**
* @brief Release clamped FMON configuration.
*
* Allow FMON configuration to follow monitored clock rate
* and/or state changes.
*
* mrq_response::err for this sub-command is defined to be:
*
* | Value | Description |
* |-------------------|---------------------------------------------------|
* | 0 | Operation was successful. |
* | -#BPMP_EBADCMD | Subcommand is not supported. |
* | -#BPMP_ENODEV | Invalid clock ID in mrq_fmon_request::cmd_and_id. |
* | -#BPMP_ENOENT | No calibration data, uninitialized. |
* | -#BPMP_ENOTSUP | AVFS config not set. |
* | -#BPMP_EOPNOTSUPP | Not in production mode. |
*/
CMD_FMON_GEAR_FREE = 2,
/**
* @brief Return rate FMON is clamped at, or 0 if FMON is not clamped.
*
* Inherently racy, since clamp state can be changed concurrently,
* only provided and useful for testing purposes.
*
* mrq_response::err for this sub-command is defined to be:
*
* | Value | Description |
* |-------------------|---------------------------------------------------|
* | 0 | Operation was successful. |
* | -#BPMP_EBADCMD | Subcommand is not supported. |
* | -#BPMP_ENODEV | Invalid clock ID in mrq_fmon_request::cmd_and_id. |
* | -#BPMP_ENOENT | No calibration data, uninitialized. |
* | -#BPMP_ENOTSUP | AVFS config not set. |
* | -#BPMP_EOPNOTSUPP | Not in production mode. |
*/
CMD_FMON_GEAR_GET = 3,
/**
* @brief Return current status of FMON faults detected by FMON
* HW or SW since last invocation of this sub-command.
* Clears fault status.
*
* mrq_response::err for this sub-command is defined to be:
*
* | Value | Description |
* |-------------------|---------------------------------------------------|
* | 0 | Operation was successful. |
* | -#BPMP_EBADCMD | Subcommand is not supported. |
* | -#BPMP_ENODEV | Invalid clock ID in mrq_fmon_request::cmd_and_id. |
* | -#BPMP_ENOENT | No calibration data, uninitialized. |
* | -#BPMP_ENOTSUP | AVFS config not set. |
* | -#BPMP_EOPNOTSUPP | Not in production mode. |
* | -#BPMP_EINVAL | Invalid fault type. |
*/
CMD_FMON_FAULT_STS_GET = 4,
};
/**
* @cond DEPRECATED
* Kept for backward compatibility
*/
#define CMD_FMON_NUM 4
/** @endcond */
/**
* @defgroup fmon_fault_type FMON fault types
* @addtogroup fmon_fault_type
* @{
*/
/** @brief All detected FMON faults (HW or SW) */
#define FMON_FAULT_TYPE_ALL 0U
/** @brief FMON faults detected by HW */
#define FMON_FAULT_TYPE_HW 1U
/** @brief FMON faults detected by SW */
#define FMON_FAULT_TYPE_SW 2U
/** @} fmon_fault_type */
/**
* @brief Request payload for #MRQ_FMON sub-command #CMD_FMON_GEAR_CLAMP.
*/
struct cmd_fmon_gear_clamp_request {
/** @brief Unused / reserved */
int32_t unused;
/** @brief Target rate in Hz. Valid range for the rate is [1, INT64_MAX] */
int64_t rate;
} BPMP_ABI_PACKED;
/** @private */
struct cmd_fmon_gear_clamp_response {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/** @private */
struct cmd_fmon_gear_free_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/** @private */
struct cmd_fmon_gear_free_response {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/** @private */
struct cmd_fmon_gear_get_request {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_FMON sub-command #CMD_FMON_GEAR_GET.
*/
struct cmd_fmon_gear_get_response {
int64_t rate;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_FMON sub-command #CMD_FMON_FAULT_STS_GET
*/
struct cmd_fmon_fault_sts_get_request {
/**
* @brief Which fault types to return in response:
*
* | Value | Description |
* |----------------------|-----------------------------------------|
* | #FMON_FAULT_TYPE_ALL | Return all detected faults (HW and SW). |
* | #FMON_FAULT_TYPE_HW | Return only HW detected faults. |
* | #FMON_FAULT_TYPE_SW | Return only SW detected faults. |
*/
uint32_t fault_type;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_FMON sub-command #CMD_FMON_FAULT_STS_GET
*/
struct cmd_fmon_fault_sts_get_response {
/**
* Bitmask of detected HW / SW specific faults, or 0 if no faults have
* been detected since last invocation of #CMD_FMON_FAULT_STS_GET.
*/
uint32_t fault_sts;
} BPMP_ABI_PACKED;
/**
* @ingroup FMON
* @brief Request payload for the #MRQ_FMON -command.
*
* Used by the sender of an #MRQ_FMON message to configure clock
* frequency monitors. The FMON request is split into several
* sub-commands. Sub-command specific payloads are defined in
* the following table:
*
* |Sub-command |Payload |
* |------------------------|--------------------------------|
* |#CMD_FMON_GEAR_CLAMP |#cmd_fmon_gear_clamp_request |
* |#CMD_FMON_GEAR_FREE |- |
* |#CMD_FMON_GEAR_GET |- |
* |#CMD_FMON_FAULT_STS_GET |#cmd_fmon_fault_sts_get_request |
*
*/
struct mrq_fmon_request {
/**
* @brief Sub-command and clock id concatenated to 32-bit word.
*
* - bits[31..24] -> Sub-command identifier from @ref mrq_fmon_cmd.
* - bits[23..0] -> Monitored clock identifier used to select target FMON.
*/
uint32_t cmd_and_id;
union {
struct cmd_fmon_gear_clamp_request fmon_gear_clamp;
/** @private */
struct cmd_fmon_gear_free_request fmon_gear_free;
/** @private */
struct cmd_fmon_gear_get_request fmon_gear_get;
struct cmd_fmon_fault_sts_get_request fmon_fault_sts_get;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup FMON
* @brief Response payload for the #MRQ_FMON -command.
*
* Each sub-command supported by @ref mrq_fmon_request may
* return sub-command-specific data as indicated below.
*
* |Sub-command |Payload |
* |------------------------|---------------------------------|
* |#CMD_FMON_GEAR_CLAMP |- |
* |#CMD_FMON_GEAR_FREE |- |
* |#CMD_FMON_GEAR_GET |#cmd_fmon_gear_get_response |
* |#CMD_FMON_FAULT_STS_GET |#cmd_fmon_fault_sts_get_response |
*
*/
struct mrq_fmon_response {
union {
/** @private */
struct cmd_fmon_gear_clamp_response fmon_gear_clamp;
/** @private */
struct cmd_fmon_gear_free_response fmon_gear_free;
struct cmd_fmon_gear_get_response fmon_gear_get;
struct cmd_fmon_fault_sts_get_response fmon_fault_sts_get;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} FMON */
/** @endcond */
/** @cond (bpmp_t194)
* @ingroup MRQ_Codes
* @def MRQ_EC
* @brief Provide status information on faults reported by Error
* Collator (EC) to HSM.
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_ec_request
* * Response Payload: @ref mrq_ec_response
*
* @note This MRQ ABI is under construction, and subject to change
*
* @addtogroup EC
* @{
*/
enum {
/**
* @cond DEPRECATED
* @brief Retrieve specified EC status.
*
* mrq_response::err is 0 if the operation was successful, or @n
* -#BPMP_ENODEV if target EC is not owned by BPMP @n
* -#BPMP_EACCES if target EC power domain is turned off @n
* -#BPMP_EBADCMD if subcommand is not supported
* @endcond
*/
CMD_EC_STATUS_GET = 1, /* deprecated */
/**
* @brief Retrieve specified EC extended status (includes error
* counter and user values).
*
* mrq_response::err is 0 if the operation was successful, or @n
* -#BPMP_ENODEV if target EC is not owned by BPMP @n
* -#BPMP_EACCES if target EC power domain is turned off @n
* -#BPMP_EBADCMD if subcommand is not supported
*/
CMD_EC_STATUS_EX_GET = 2,
CMD_EC_NUM,
};
/** @brief BPMP ECs error types */
enum bpmp_ec_err_type {
/** @brief Parity error on internal data path
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_PARITY_INTERNAL = 1,
/** @brief ECC SEC error on internal data path
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_ECC_SEC_INTERNAL = 2,
/** @brief ECC DED error on internal data path
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_ECC_DED_INTERNAL = 3,
/** @brief Comparator error
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_COMPARATOR = 4,
/** @brief Register parity error
*
* Error descriptor @ref ec_err_reg_parity_desc.
*/
EC_ERR_TYPE_REGISTER_PARITY = 5,
/** @brief Parity error from on-chip SRAM/FIFO
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_PARITY_SRAM = 6,
/** @brief Clock Monitor error
*
* Error descriptor @ref ec_err_fmon_desc.
*/
EC_ERR_TYPE_CLOCK_MONITOR = 9,
/** @brief Voltage Monitor error
*
* Error descriptor @ref ec_err_vmon_desc.
*/
EC_ERR_TYPE_VOLTAGE_MONITOR = 10,
/** @brief SW Correctable error
*
* Error descriptor @ref ec_err_sw_error_desc.
*/
EC_ERR_TYPE_SW_CORRECTABLE = 16,
/** @brief SW Uncorrectable error
*
* Error descriptor @ref ec_err_sw_error_desc.
*/
EC_ERR_TYPE_SW_UNCORRECTABLE = 17,
/** @brief Other HW Correctable error
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_OTHER_HW_CORRECTABLE = 32,
/** @brief Other HW Uncorrectable error
*
* Error descriptor @ref ec_err_simple_desc.
*/
EC_ERR_TYPE_OTHER_HW_UNCORRECTABLE = 33,
};
/** @brief Group of registers with parity error. */
enum ec_registers_group {
/** @brief Functional registers group */
EC_ERR_GROUP_FUNC_REG = 0U,
/** @brief SCR registers group */
EC_ERR_GROUP_SCR_REG = 1U,
};
/**
* @defgroup bpmp_ec_status_flags EC Status Flags
* @addtogroup bpmp_ec_status_flags
* @{
*/
/** @brief No EC error found flag */
#define EC_STATUS_FLAG_NO_ERROR 0x0001U
/** @brief Last EC error found flag */
#define EC_STATUS_FLAG_LAST_ERROR 0x0002U
/** @brief EC latent error flag */
#define EC_STATUS_FLAG_LATENT_ERROR 0x0004U
/** @} bpmp_ec_status_flags */
/**
* @defgroup bpmp_ec_desc_flags EC Descriptor Flags
* @addtogroup bpmp_ec_desc_flags
* @{
*/
/** @brief EC descriptor error resolved flag */
#define EC_DESC_FLAG_RESOLVED 0x0001U
/** @brief EC descriptor failed to retrieve id flag */
#define EC_DESC_FLAG_NO_ID 0x0002U
/** @} bpmp_ec_desc_flags */
/**
* |error type | fmon_clk_id values |
* |---------------------------------|---------------------------|
* |@ref EC_ERR_TYPE_CLOCK_MONITOR |@ref bpmp_clock_ids |
*/
struct ec_err_fmon_desc {
/** @brief Bitmask of @ref bpmp_ec_desc_flags */
uint16_t desc_flags;
/** @brief FMON monitored clock id */
uint16_t fmon_clk_id;
/**
* @brief Bitmask of fault flags
*
* @ref bpmp_fmon_faults_flags
*/
uint32_t fmon_faults;
/** @brief FMON faults access error */
int32_t fmon_access_error;
} BPMP_ABI_PACKED;
/**
* | error type | vmon_adc_id values |
* |---------------------------------|---------------------------|
* |@ref EC_ERR_TYPE_VOLTAGE_MONITOR |@ref bpmp_adc_ids |
*/
struct ec_err_vmon_desc {
/** @brief Bitmask of @ref bpmp_ec_desc_flags */
uint16_t desc_flags;
/** @brief VMON rail adc id */
uint16_t vmon_adc_id;
/** @brief Bitmask of bpmp_vmon_faults_flags */
uint32_t vmon_faults;
/** @brief VMON faults access error */
int32_t vmon_access_error;
} BPMP_ABI_PACKED;
/**
* |error type | reg_id values |
* |---------------------------------|-----------------------|
* |@ref EC_ERR_TYPE_REGISTER_PARITY | bpmp_ec_registers_ids |
*/
struct ec_err_reg_parity_desc {
/** @brief Bitmask of @ref bpmp_ec_desc_flags */
uint16_t desc_flags;
/** @brief Register id */
uint16_t reg_id;
/** @brief Register group @ref ec_registers_group */
uint16_t reg_group;
} BPMP_ABI_PACKED;
/**
* |error type | err_source_id values |
* |--------------------------------- |----------------------|
* |@ref EC_ERR_TYPE_SW_CORRECTABLE | bpmp_ec_ce_swd_ids |
* |@ref EC_ERR_TYPE_SW_UNCORRECTABLE | bpmp_ec_ue_swd_ids |
*/
struct ec_err_sw_error_desc {
/** @brief Bitmask of @ref bpmp_ec_desc_flags */
uint16_t desc_flags;
/** @brief Error source id */
uint16_t err_source_id;
/** @brief Sw error data */
uint32_t sw_error_data;
} BPMP_ABI_PACKED;
/**
* |error type | err_source_id values |
* |----------------------------------------|------------------------|
* |@ref EC_ERR_TYPE_PARITY_INTERNAL | bpmp_ec_ipath_ids |
* |@ref EC_ERR_TYPE_ECC_SEC_INTERNAL | bpmp_ec_ipath_ids |
* |@ref EC_ERR_TYPE_ECC_DED_INTERNAL | bpmp_ec_ipath_ids |
* |@ref EC_ERR_TYPE_COMPARATOR | bpmp_ec_comparator_ids|
* |@ref EC_ERR_TYPE_OTHER_HW_CORRECTABLE | bpmp_ec_misc_hwd_ids |
* |@ref EC_ERR_TYPE_OTHER_HW_UNCORRECTABLE | bpmp_ec_misc_hwd_ids |
* |@ref EC_ERR_TYPE_PARITY_SRAM | bpmp_clock_ids |
*/
struct ec_err_simple_desc {
/** @brief Bitmask of @ref bpmp_ec_desc_flags */
uint16_t desc_flags;
/** @brief Error source id. Id space depends on error type. */
uint16_t err_source_id;
} BPMP_ABI_PACKED;
/** @brief Union of EC error descriptors */
union ec_err_desc {
struct ec_err_fmon_desc fmon_desc;
struct ec_err_vmon_desc vmon_desc;
struct ec_err_reg_parity_desc reg_parity_desc;
struct ec_err_sw_error_desc sw_error_desc;
struct ec_err_simple_desc simple_desc;
} BPMP_ABI_PACKED;
struct cmd_ec_status_get_request {
/** @brief HSM error line number that identifies target EC. */
uint32_t ec_hsm_id;
} BPMP_ABI_PACKED;
/** EC status maximum number of descriptors */
#define EC_ERR_STATUS_DESC_MAX_NUM 4U
/**
* @cond DEPRECATED
*/
struct cmd_ec_status_get_response {
/** @brief Target EC id (the same id received with request). */
uint32_t ec_hsm_id;
/**
* @brief Bitmask of @ref bpmp_ec_status_flags
*
* If NO_ERROR flag is set, error_ fields should be ignored
*/
uint32_t ec_status_flags;
/** @brief Found EC error index. */
uint32_t error_idx;
/** @brief Found EC error type @ref bpmp_ec_err_type. */
uint32_t error_type;
/** @brief Number of returned EC error descriptors */
uint32_t error_desc_num;
/** @brief EC error descriptors */
union ec_err_desc error_descs[EC_ERR_STATUS_DESC_MAX_NUM];
} BPMP_ABI_PACKED;
/** @endcond */
struct cmd_ec_status_ex_get_response {
/** @brief Target EC id (the same id received with request). */
uint32_t ec_hsm_id;
/**
* @brief Bitmask of @ref bpmp_ec_status_flags
*
* If NO_ERROR flag is set, error_ fields should be ignored
*/
uint32_t ec_status_flags;
/** @brief Found EC error index. */
uint32_t error_idx;
/** @brief Found EC error type @ref bpmp_ec_err_type. */
uint32_t error_type;
/** @brief Found EC mission error counter value */
uint32_t error_counter;
/** @brief Found EC mission error user value */
uint32_t error_uval;
/** @brief Reserved entry */
uint32_t reserved;
/** @brief Number of returned EC error descriptors */
uint32_t error_desc_num;
/** @brief EC error descriptors */
union ec_err_desc error_descs[EC_ERR_STATUS_DESC_MAX_NUM];
} BPMP_ABI_PACKED;
/**
* @ingroup EC
* @brief Request with #MRQ_EC
*
* Used by the sender of an #MRQ_EC message to access ECs owned
* by BPMP.
*
* @cond DEPRECATED
* |sub-command |payload |
* |----------------------------|-----------------------|
* |@ref CMD_EC_STATUS_GET |ec_status_get |
* @endcond
*
* |sub-command |payload |
* |----------------------------|-----------------------|
* |@ref CMD_EC_STATUS_EX_GET |ec_status_get |
*
*/
struct mrq_ec_request {
/** @brief Sub-command id. */
uint32_t cmd_id;
union {
struct cmd_ec_status_get_request ec_status_get;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @ingroup EC
* @brief Response to MRQ_EC
*
* Each sub-command supported by @ref mrq_ec_request may return
* sub-command-specific data as indicated below.
*
* @cond DEPRECATED
* |sub-command |payload |
* |----------------------------|------------------------|
* |@ref CMD_EC_STATUS_GET |ec_status_get |
* @endcond
*
* |sub-command |payload |
* |----------------------------|------------------------|
* |@ref CMD_EC_STATUS_EX_GET |ec_status_ex_get |
*
*/
struct mrq_ec_response {
union {
/**
* @cond DEPRECATED
*/
struct cmd_ec_status_get_response ec_status_get;
/** @endcond */
struct cmd_ec_status_ex_get_response ec_status_ex_get;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} EC */
/** @endcond */
/** @cond (bpmp_th500)
* @ingroup MRQ_Codes
* @def MRQ_TELEMETRY
* @brief Get address of memory buffer refreshed with recently sampled
* telemetry data
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
* * Response Payload: @ref mrq_telemetry_response
* @addtogroup Telemetry
* @{
*/
/**
* @brief Response payload for the #MRQ_TELEMETRY -command
*
* mrq_response::err is defined as:
*
* | Value | Description |
* |-----------------|------------------------------------------------------------|
* | 0 | Telemetry data is available at returned address. |
* | -#BPMP_EACCES | MRQ master is not allowed to request buffer refresh. |
* | -#BPMP_ENAVAIL | Telemetry buffer cannot be refreshed via this MRQ channel. |
* | -#BPMP_ENOTSUP | Telemetry buffer is not supported by BPMP-FW. |
* | -#BPMP_ENODEV | Telemetry MRQ is not supported by BPMP-FW. |
*/
struct mrq_telemetry_response {
/** @brief Physical address of telemetry data buffer */
uint64_t data_buf_addr; /**< see @ref bpmp_telemetry_layout */
} BPMP_ABI_PACKED;
/** @} Telemetry */
/** @endcond */
/** @cond (bpmp_tb500)
* @ingroup MRQ_Codes
* @def MRQ_TELEMETRY_EX
* @brief Get telemetry configuration settings.
*
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_telemetry_ex_request
* * Response Payload: @ref mrq_telemetry_ex_response
*
* @addtogroup Telemetry_ex
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_TELEMETRY_EX.
*/
enum mrq_telemetry_ex_cmd {
/**
* @brief Check whether the BPMP-FW supports the specified
* #MRQ_TELEMETRY_EX sub-command.
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_TELEMETRY_EX_QUERY_ABI = 0,
/**
* @brief Get telemetry buffer base address and data size
*
* mrq_response:err is defined as:
*
* | Value | Description |
* |----------------|------------------------------------------------|
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_TELEMETRY_EX is not supported by BPMP-FW. |
*/
CMD_TELEMETRY_EX_BASE_SZ_GET = 1,
};
/**
* @brief Request data for #MRQ_TELEMETRY_EX sub-command
* #CMD_TELEMETRY_EX_QUERY_ABI
*/
struct cmd_telemetry_ex_query_abi_request {
/** @brief Sub-command identifier from @ref mrq_telemetry_ex_cmd */
uint32_t cmd_code;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_TELEMETRY_EX sub-command
* #CMD_TELEMETRY_EX_BASE_SZ_GET
*/
struct cmd_telemetry_ex_base_sz_get_response {
/**
* @brief Physical address of telemetry data buffer
*
* 0 if no buffer is allocated for the initiator sending MRQ.
*/
uint64_t buf_base_addr;
/** @brief Telemetry data size in bytes */
uint32_t buf_size;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for the #MRQ_TELEMETRY_EX -command
*
* | Sub-command | Request payload |
* |-------------------------------|----------------------------------------|
* | #CMD_TELEMETRY_EX_QUERY_ABI | #cmd_telemetry_ex_query_abi_request |
* | #CMD_TELEMETRY_EX_BASE_SZ_GET | - |
*/
struct mrq_telemetry_ex_request {
/** @brief Sub-command ID from @ref mrq_telemetry_ex_cmd. */
uint32_t cmd;
union {
struct cmd_telemetry_ex_query_abi_request
telemetry_ex_query_abi_req;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for the #MRQ_TELEMETRY_EX -command.
*
* | Sub-command | Response payload |
* |-------------------------------|----------------------------------------|
* | #CMD_TELEMETRY_EX_QUERY_ABI | - |
* | #CMD_TELEMETRY_EX_BASE_SZ_GET | #cmd_telemetry_ex_base_sz_get_response |
*/
struct mrq_telemetry_ex_response {
union {
struct cmd_telemetry_ex_base_sz_get_response
telemetry_ex_base_sz_get_rsp;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} Telemetry_ex */
/** @endcond */
/** @cond (bpmp_th500 || bpmp_tb500)
* @ingroup MRQ_Codes
* @def MRQ_PWR_LIMIT
* @brief Control power limits.
*
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_pwr_limit_request
* * Response Payload: @ref mrq_pwr_limit_response
*
* @addtogroup Pwrlimit
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_PWR_LIMIT.
*/
enum mrq_pwr_limit_cmd {
/**
* @brief Check whether the BPMP-FW supports the specified
* #MRQ_PWR_LIMIT sub-command.
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_PWR_LIMIT_QUERY_ABI = 0,
/**
* @brief Set power limit
*
* mrq_response:err is defined as:
*
* | Value | Description |
* |----------------|---------------------------------------------|
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_PWR_LIMIT is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
* | -#BPMP_EACCES | Request is not accepted. |
*/
CMD_PWR_LIMIT_SET = 1,
/**
* @brief Get power limit setting
*
* mrq_response:err is defined as:
*
* | Value | Description |
* |----------------|---------------------------------------------|
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_PWR_LIMIT is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_PWR_LIMIT_GET = 2,
/**
* @brief Get current aggregated power cap
*
* Get currently applied power cap for the specified limit id
* aggregated across all limit sources and types.
*
* mrq_response:err is defined as:
*
* | Value | Description |
* |----------------|---------------------------------------------|
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_PWR_LIMIT is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_PWR_LIMIT_CURR_CAP = 3,
};
/**
* @defgroup bpmp_pwr_limit_type PWR_LIMIT TYPEs
* @{
*/
/** @brief Limit value specifies target cap */
#define PWR_LIMIT_TYPE_TARGET_CAP 0U
/** @brief Limit value specifies maximum possible target cap */
#define PWR_LIMIT_TYPE_BOUND_MAX 1U
/** @brief Limit value specifies minimum possible target cap */
#define PWR_LIMIT_TYPE_BOUND_MIN 2U
/** @brief Number of limit types supported by #MRQ_PWR_LIMIT command */
#define PWR_LIMIT_TYPE_NUM 3U
/** @} bpmp_pwr_limit_type */
/**
* @brief Request data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_QUERY_ABI
*/
struct cmd_pwr_limit_query_abi_request {
/** @brief Sub-command identifier from @ref mrq_pwr_limit_cmd */
uint32_t cmd_code;
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_PWR_LIMIT command CMD_PWR_LIMIT_SET
*
* Set specified limit of specified type from specified source. The success of
* the request means that specified value is accepted as input to arbitration
* with other sources settings for the same limit of the same type. Zero limit
* is ignored by the arbitration (i.e., indicates "no limit set").
*/
struct cmd_pwr_limit_set_request {
/** @brief Power limit identifier from @ref bpmp_pwr_limit_id */
uint32_t limit_id;
/** @brief Power limit source identifier from @ref bpmp_pwr_limit_src */
uint32_t limit_src; /**< @ref bpmp_pwr_limit_src */
/** @brief Power limit type from @ref bpmp_pwr_limit_type */
uint32_t limit_type;
/** @brief New power limit value */
uint32_t limit_setting;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_PWR_LIMIT sub-command #CMD_PWR_LIMIT_GET
*
* Get previously set from specified source specified limit value of specified
* type.
*/
struct cmd_pwr_limit_get_request {
/** @brief Power limit identifier from @ref bpmp_pwr_limit_id */
uint32_t limit_id;
/** @brief Power limit source identifier from @ref bpmp_pwr_limit_src */
uint32_t limit_src; /**< @ref bpmp_pwr_limit_src */
/** @brief Power limit type from @ref bpmp_pwr_limit_type */
uint32_t limit_type;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_PWR_LIMIT sub-command #CMD_PWR_LIMIT_GET
*/
struct cmd_pwr_limit_get_response {
/** @brief Power limit value */
uint32_t limit_setting;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_PWR_LIMIT sub-command #CMD_PWR_LIMIT_CURR_CAP
*
* For specified limit get current power cap aggregated from all sources.
*/
struct cmd_pwr_limit_curr_cap_request {
/** @brief Power limit identifier from @ref bpmp_pwr_limit_id */
uint32_t limit_id;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_PWR_LIMIT sub-command #CMD_PWR_LIMIT_CURR_CAP
*/
struct cmd_pwr_limit_curr_cap_response {
/** @brief Current power cap value */
uint32_t curr_cap;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for the #MRQ_PWR_LIMIT -command
*
* | Sub-command | Request payload |
* |--------------------------|----------------------------------|
* | #CMD_PWR_LIMIT_QUERY_ABI | #cmd_pwr_limit_query_abi_request |
* | #CMD_PWR_LIMIT_SET | #cmd_pwr_limit_set_request |
* | #CMD_PWR_LIMIT_GET | #cmd_pwr_limit_get_request |
* | #CMD_PWR_LIMIT_CURR_CAP | #cmd_pwr_limit_curr_cap_request |
*/
struct mrq_pwr_limit_request {
uint32_t cmd;
union {
struct cmd_pwr_limit_query_abi_request pwr_limit_query_abi_req;
struct cmd_pwr_limit_set_request pwr_limit_set_req;
struct cmd_pwr_limit_get_request pwr_limit_get_req;
struct cmd_pwr_limit_curr_cap_request pwr_limit_curr_cap_req;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for the #MRQ_PWR_LIMIT -command.
*
* | Sub-command | Response payload |
* |--------------------------|----------------------------------|
* | #CMD_PWR_LIMIT_QUERY_ABI | - |
* | #CMD_PWR_LIMIT_SET | - |
* | #CMD_PWR_LIMIT_GET | #cmd_pwr_limit_get_response |
* | #CMD_PWR_LIMIT_CURR_CAP | #cmd_pwr_limit_curr_cap_response |
*/
struct mrq_pwr_limit_response {
union {
struct cmd_pwr_limit_get_response pwr_limit_get_rsp;
struct cmd_pwr_limit_curr_cap_response pwr_limit_curr_cap_rsp;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} Pwrlimit */
/** @endcond */
/** @cond (bpmp_th500)
* @ingroup MRQ_Codes
* @def MRQ_PWRMODEL
* @brief Retrieve power evaluted by SoC power model.
*
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_pwrmodel_request
* * Response Payload: @ref mrq_pwrmodel_response
*
* @addtogroup Pwrmodel
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_PWRMODEL.
*/
enum mrq_pwrmodel_cmd {
/**
* @brief Check whether the BPMP-FW supports the specified
* #MRQ_PWRMODEL sub-command.
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_PWRMODEL_QUERY_ABI = 0,
/**
* @brief Get power model output power
*
* mrq_response:err is defined as:
*
* | Value | Description |
* |----------------|---------------------------------------------|
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_PWRMODEL is not supported by BPMP-FW. |
* | -#BPMP_ERANGE | Power model calculation overflow. |
*/
CMD_PWRMODEL_PWR_GET = 1,
};
/**
* @brief Request data for #MRQ_PWRMODEL sub-command #CMD_PWRMODEL_QUERY_ABI
*/
struct cmd_pwrmodel_query_abi_request {
/** @brief Sub-command identifier from @ref mrq_pwrmodel_cmd */
uint32_t cmd_code;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_PWRMODEL sub-command #CMD_PWRMODEL_PWR_GET
*
* Rerieve power evaluated by power model for specified work-load factor,
* temperature, and cpu iso frequency for all cores.
*/
struct cmd_pwrmodel_pwr_get_request {
/** @brief Unitless work load factor to evaluate power model at */
uint32_t work_load_factor;
/** @brief CPU frequency in kHz to evaluate power model at */
uint32_t cpu_frequency;
/** @brief Temperature in mC to evaluate power model at */
int32_t temperature;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_PWRMODEL sub-command #CMD_PWRMODEL_PWR_GET
*/
struct cmd_pwrmodel_pwr_get_response {
/** @brief Power model output in mW */
uint32_t power;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for the #MRQ_PWRMODEL -command
*
* | Sub-command | Request payload |
* |--------------------------|----------------------------------|
* | #CMD_PWRMODEL_QUERY_ABI | #cmd_pwrmodel_query_abi_request |
* | #CMD_PWRMODEL_PWR_GET | #cmd_pwrmodel_pwr_get_request |
*/
struct mrq_pwrmodel_request {
uint32_t cmd;
union {
struct cmd_pwrmodel_query_abi_request pwrmodel_query_abi_req;
struct cmd_pwrmodel_pwr_get_request pwrmodel_pwr_get_req;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for the #MRQ_PWRMODEL -command.
*
* | Sub-command | Response payload |
* |--------------------------|----------------------------------|
* | #CMD_PWRMODEL_QUERY_ABI | - |
* | #CMD_PWRMODEL_PWR_GET | #cmd_pwrmodel_pwr_get_response |
*/
struct mrq_pwrmodel_response {
union {
struct cmd_pwrmodel_pwr_get_response pwrmodel_pwr_get_rsp;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} Pwrmodel */
/** @endcond */
/** @cond (bpmp_th500)
* @ingroup MRQ_Codes
* @def MRQ_PWR_CNTRL
* @brief Configure power controllers.
*
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_pwr_cntrl_request
* * Response Payload: @ref mrq_pwr_cntrl_response
*
* @addtogroup Pwrcntrl
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_PWR_CNTRL.
*/
enum mrq_pwr_cntrl_cmd {
/**
* @brief Check whether the BPMP-FW supports the specified
* #MRQ_PWR_CNTRL sub-command.
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_PWR_CNTRL_QUERY_ABI = 0,
/**
* @brief Switch power controller to/out of bypass mode
*
* mrq_response:err is defined as:
*
* | Value | Description |
* |----------------|---------------------------------------------|
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_PWR_CNTRL is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
* | -#BPMP_ENOTSUP | Bypass mode is not supported. |
*/
CMD_PWR_CNTRL_BYPASS_SET = 1,
/**
* @brief Get power controller bypass mode status
*
* mrq_response:err is defined as:
*
* | Value | Description |
* |----------------|---------------------------------------------|
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_PWR_CNTRL is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_PWR_CNTRL_BYPASS_GET = 2,
};
/**
* @brief Request data for #MRQ_PWR_CNTRL sub-command #CMD_PWR_CNTRL_QUERY_ABI
*/
struct cmd_pwr_cntrl_query_abi_request {
/** @brief Sub-command identifier from @ref mrq_pwr_cntrl_cmd */
uint32_t cmd_code;
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_PWR_CNTRL sub-command #CMD_PWR_CNTRL_BYPASS_SET
*
* Switch specified power controller to / out of bypass mode provided such
* mode is supported by the controller.
*/
struct cmd_pwr_cntrl_bypass_set_request {
/** @brief Power controller identifier from @ref bpmp_pwr_cntrl_id */
uint32_t cntrl_id;
/**
* @brief Bypass setting.
*
* Valid values:
*
* * 1 to enter bypass mode,
* * 0 to exit bypass mode.
*/
uint32_t bypass_setting;
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_PWR_CNTRL sub-command #CMD_PWR_CNTRL_BYPASS_GET
*
* Get bypass mode status of the specified power controller.
*/
struct cmd_pwr_cntrl_bypass_get_request {
/** @brief Power controller identifier from @ref bpmp_pwr_cntrl_id */
uint32_t cntrl_id;
} BPMP_ABI_PACKED;
/**
* @brief Response data for #MRQ_PWR_CNTRL sub-command #CMD_PWR_CNTRL_BYPASS_GET
*
* Get current bypass mode status if such mode is supported by the controller.
* Otherwise, return "out of bypass" .
*/
struct cmd_pwr_cntrl_bypass_get_response {
/**
* @brief Bypass mode status: 1 controller is in bypass,
* 0 controller is out of bypass.
*/
uint32_t bypass_status;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for the #MRQ_PWR_CNTRL -command
*
* | Sub-command | Request payload |
* |---------------------------|-----------------------------------|
* | #CMD_PWR_CNTRL_QUERY_ABI | #cmd_pwr_cntrl_query_abi_request |
* | #CMD_PWR_CNTRL_BYPASS_SET | #cmd_pwr_cntrl_bypass_set_request |
* | #CMD_PWR_CNTRL_BYPASS_GET | #cmd_pwr_cntrl_bypass_get_request |
*/
struct mrq_pwr_cntrl_request {
uint32_t cmd;
union {
struct cmd_pwr_cntrl_query_abi_request pwr_cntrl_query_abi_req;
struct cmd_pwr_cntrl_bypass_set_request pwr_cntrl_bypass_set_req;
struct cmd_pwr_cntrl_bypass_get_request pwr_cntrl_bypass_get_req;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for the #MRQ_PWR_CNTRL -command.
*
* | Sub-command | Response payload |
* |---------------------------|-----------------------------------|
* | #CMD_PWR_CNTRL_QUERY_ABI | - |
* | #CMD_PWR_CNTRL_BYPASS_SET | - |
* | #CMD_PWR_CNTRL_BYPASS_GET | #cmd_pwr_cntrl_bypass_get_response|
*/
struct mrq_pwr_cntrl_response {
union {
struct cmd_pwr_cntrl_bypass_get_response pwr_cntrl_bypass_get_rsp;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} Pwrcntrl */
/** @endcond */
/** @cond (bpmp_t264)
* @ingroup MRQ_Codes
* @def MRQ_SLC
* @brief Configure SLC state.
*
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_slc_request
* * Response Payload: @ref mrq_slc_response
*
* @addtogroup Slc
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_SLC.
*/
enum mrq_slc_cmd {
/**
* @brief Check whether the BPMP-FW supports the specified
* #MRQ_SLC sub-command.
*
* mrq_response::err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_SLC_QUERY_ABI = 0,
/**
* @brief Switch SLC to/out of bypass mode
*
* mrq_response:err is defined as:
*
* | Value | Description |
* |----------------|---------------------------------------------|
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_SLC is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
* | -#BPMP_ENOTSUP | Bypass mode is not supported. |
*/
CMD_SLC_BYPASS_SET = 1,
/**
* @brief Get SLC bypass mode status
*
* mrq_response:err is defined as:
*
* | Value | Description |
* |----------------|---------------------------------------------|
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_SLC is not supported by BPMP-FW. |
*/
CMD_SLC_BYPASS_GET = 2,
};
/**
* @brief Request data for #MRQ_SLC sub-command #CMD_SLC_QUERY_ABI
*/
struct cmd_slc_query_abi_request {
/** @brief Sub-command identifier from @ref mrq_slc_cmd */
uint32_t cmd_code;
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_SLC sub-command #CMD_SLC_BYPASS_SET
*
* Switch SLC to / out of bypass mode provided such
* mode is supported by the SLC.
*/
struct cmd_slc_bypass_set_request {
/**
* @brief Bypass setting.
*
* Valid values:
*
* * 1 to enter bypass mode,
* * 0 to exit bypass mode.
*/
uint32_t bypass_setting;
} BPMP_ABI_PACKED;
/**
* @brief Response data for #MRQ_SLC sub-command #CMD_SLC_BYPASS_GET
*
* Get current bypass mode status if such mode is supported by the SLC.
* Otherwise, return "out of bypass" .
*/
struct cmd_slc_bypass_get_response {
/**
* @brief Bypass mode status: 1 SLC is in bypass,
* 0 SLC is out of bypass.
*/
uint32_t bypass_status;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for the #MRQ_SLC -command
*
* | Sub-command | Request payload |
* |---------------------------|-----------------------------------|
* | #CMD_SLC_QUERY_ABI | #cmd_slc_query_abi_request |
* | #CMD_SLC_BYPASS_SET | #cmd_slc_bypass_set_request |
* | #CMD_SLC_BYPASS_GET | - |
*/
struct mrq_slc_request {
uint32_t cmd;
union {
struct cmd_slc_query_abi_request slc_query_abi_req;
struct cmd_slc_bypass_set_request slc_bypass_set_req;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for the #MRQ_SLC -command.
*
* | Sub-command | Response payload |
* |---------------------------|-----------------------------------|
* | #CMD_SLC_QUERY_ABI | - |
* | #CMD_SLC_BYPASS_SET | - |
* | #CMD_SLC_BYPASS_GET | #cmd_slc_bypass_get_response |
*/
struct mrq_slc_response {
union {
struct cmd_slc_bypass_get_response slc_bypass_get_rsp;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} Slc */
/** @endcond */
/** @cond (bpmp_th500)
* @ingroup MRQ_Codes
* @def MRQ_GEARS
* @brief Get thresholds for NDIV offset switching
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: N/A
* * Response Payload: @ref mrq_gears_response
* @addtogroup Gears
* @{
*/
/**
* @brief Response to #MRQ_GEARS
*
* Used by the sender of an #MRQ_GEARS message to request thresholds
* for NDIV offset switching.
*
* The mrq_gears_response::ncpu array defines four thresholds in units
* of number of online CPUS to be used for choosing between five different
* NDIV offset settings for CCPLEX cluster NAFLLs
*
* 1. If number of online CPUs < ncpu[0] use offset0
* 2. If number of online CPUs < ncpu[1] use offset1
* 3. If number of online CPUs < ncpu[2] use offset2
* 4. If number of online CPUs < ncpu[3] use offset3
* 5. If number of online CPUs >= ncpu[3] disable offsetting
*
* For TH500 mrq_gears_response::ncpu array has four valid entries.
*
* mrq_response::err is
* * 0: gears defined and response data valid
* * -#BPMP_ENODEV: MRQ is not supported by BPMP-FW
* * -#BPMP_EACCES: Operation not permitted for the MRQ master
* * -#BPMP_ENAVAIL: NDIV offsetting is disabled
*/
struct mrq_gears_response {
/** @brief number of online CPUs for each gear */
uint32_t ncpu[8];
/** @brief ndiv offset for each gear */
uint32_t ndiv_offset[8];
/** @brief voltage below which gears are disabled */
uint32_t uv_threshold;
} BPMP_ABI_PACKED;
/** @} Gears */
/** @endcond */
/**
* @ingroup MRQ_Codes
* @def MRQ_SHUTDOWN
* @brief System shutdown
*
* This message indicates system shutdown or reboot request. BPMP will
* initiate system shutdown/reboot after receiving this message, it
* may include turning off some rails in sequence and programming
* PMIC.
*
* * Initiators: CPU_S, MCE
* * Targets: BPMP
* * Request Payload: @ref mrq_shutdown_request
* * Response Payload: N/A
* @addtogroup Shutdown
* @{
*/
/**
* @brief Request with #MRQ_SHUTDOWN
*/
struct mrq_shutdown_request {
/**
* @brief Shutdown state ID
*
* Legal values:
* * 0 - Power off
* * 1 - Reboot
* @cond bpmp_t264
* * 2 - Suspend
* @endcond
*/
uint32_t state;
} BPMP_ABI_PACKED;
/** @} Shutdown */
/** @cond (bpmp_th500 || bpmp_tb500)
* @defgroup bpmp_c2c_status C2C link status
* @addtogroup bpmp_c2c_status
* @{
*/
/** @brief initial status code */
#define BPMP_C2C_STATUS_INIT_NOT_STARTED 0
/** @brief Invalid speedo code */
#define BPMP_C2C_STATUS_C2C_INVALID_SPEEDO_CODE 7
/** @brief Invalid frequency */
#define BPMP_C2C_STATUS_C2C_INVALID_FREQ 8
/** @brief Invalid link */
#define BPMP_C2C_STATUS_C2C_INVALID_LINK 9
/** @brief refpll lock polling times out - partition 0 */
#define BPMP_C2C_STATUS_C2C0_REFPLL_FAIL 10
/** @brief refpll lock polling times out - partition 1 */
#define BPMP_C2C_STATUS_C2C1_REFPLL_FAIL 11
/** @brief PLL cal times out - partition 0 */
#define BPMP_C2C_STATUS_C2C0_PLLCAL_FAIL 12
/** @brief PLL cal times out - partition 1 */
#define BPMP_C2C_STATUS_C2C1_PLLCAL_FAIL 13
/** @brief clock detection times out - partition 0 */
#define BPMP_C2C_STATUS_C2C0_CLKDET_FAIL 14
/** @brief clock detection times out - partition 1 */
#define BPMP_C2C_STATUS_C2C1_CLKDET_FAIL 15
/** @brief Final trainings fail partition 0 */
#define BPMP_C2C_STATUS_C2C0_TR_FAIL 16
/** @brief Final trainings fail partition 1 */
#define BPMP_C2C_STATUS_C2C1_TR_FAIL 17
/** @brief C2C FW init done */
#define NV_GFW_GLOBAL_DEVINIT_C2C_STATUS_C2C_FW_INIT_DONE 20
/** @brief C2C FW init failed partition 0 */
#define NV_GFW_GLOBAL_DEVINIT_C2C_STATUS_C2C0_FW_INIT_FAIL 21
/** @brief C2C FW init failed partition 1 */
#define NV_GFW_GLOBAL_DEVINIT_C2C_STATUS_C2C1_FW_INIT_FAIL 22
/** @brief no failure seen, c2c init was successful */
#define BPMP_C2C_STATUS_C2C_LINK_TRAIN_PASS 255
/** @} bpmp_c2c_status */
/**
* @ingroup MRQ_Codes
* @def MRQ_C2C
* @brief Control C2C partitions initialization.
*
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_c2c_request
* * Response Payload: @ref mrq_c2c_response
*
* @addtogroup C2C
* @{
*/
enum mrq_c2c_cmd {
/**
* @brief Check whether the BPMP driver supports the specified request
* type
*
* mrq_response:: err is 0 if the specified request is supported and
* -#BPMP_ENODEV otherwise
*/
CMD_C2C_QUERY_ABI = 0,
/**
* @brief Start C2C initialization
*
* mrq_response:err is
* * 0: Success
* * -#BPMP_ENODEV: MRQ_C2C is not supported by BPMP-FW
* * -#BPMP_ENAVAIL: Invalid request parameters
* * -#BPMP_EACCES: Request is not accepted
*/
CMD_C2C_START_INITIALIZATION = 1,
/**
* @brief Command to query current C2C training status
*
* This command will return the result of the latest C2C re-training that is initiated with
* MRQ_C2C.CMD_C2C_START_INITIALIZATION or MRQ_C2C.CMD_C2C_START_HOTRESET calls.
* If no training has been initiated yet, the command will return code BPMP_C2C_STATUS_INIT_NOT_STARTED.
*
* mrq_response:err is
* * 0: Success
* * -#BPMP_ENODEV: MRQ_C2C is not supported by BPMP-FW
* * -#BPMP_EACCES: Request is not accepted
*/
CMD_C2C_GET_STATUS = 2,
/**
* @brief C2C hot-reset precondition
*
* mrq_response:err is
* * 0: Success
* * -#BPMP_ENODEV: MRQ_C2C is not supported by BPMP-FW
* * -#BPMP_ENAVAIL: Invalid request parameters
* * -#BPMP_EACCES: Request is not accepted
*/
CMD_C2C_HOTRESET_PREP = 3,
/**
* @brief Start C2C hot-reset
*
* mrq_response:err is
* * 0: Success
* * -#BPMP_ENODEV: MRQ_C2C is not supported by BPMP-FW
* * -#BPMP_ENAVAIL: Invalid request parameters
* * -#BPMP_EACCES: Request is not accepted
*/
CMD_C2C_START_HOTRESET = 4,
CMD_C2C_MAX
};
/**
* @brief Request data for #MRQ_C2C command CMD_C2C_QUERY_ABI
*/
struct cmd_c2c_query_abi_request {
/** @brief Command identifier to be queried */
uint32_t cmd;
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_C2C command CMD_C2C_START_INITIALIZATION
*/
struct cmd_c2c_start_init_request {
/** @brief 1: partition 0; 2: partition 1; 3: partition 0 and 1; */
uint8_t partitions;
} BPMP_ABI_PACKED;
/**
* @brief Response data for #MRQ_C2C command CMD_C2C_START_INITIALIZATION
*/
struct cmd_c2c_start_init_response {
/** @brief Refer to @ref bpmp_c2c_status */
uint8_t status;
} BPMP_ABI_PACKED;
/**
* @brief Response data for #MRQ_C2C command CMD_C2C_GET_STATUS
*/
struct cmd_c2c_get_status_response {
/** @brief Refer to @ref bpmp_c2c_status */
uint8_t status;
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_C2C command CMD_C2C_HOTRESET_PREP
*/
struct cmd_c2c_hotreset_prep_request {
/** @brief 1: partition 0; 2: partition 1; 3: partition 0 and 1; */
uint8_t partitions;
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_C2C command CMD_C2C_START_HOTRESET
*/
struct cmd_c2c_start_hotreset_request {
/** @brief 1: partition 0; 2: partition 1; 3: partition 0 and 1; */
uint8_t partitions;
} BPMP_ABI_PACKED;
/**
* @brief Response data for #MRQ_C2C command CMD_C2C_START_HOTRESET
*/
struct cmd_c2c_start_hotreset_response {
/** @brief Refer to @ref bpmp_c2c_status */
uint8_t status;
} BPMP_ABI_PACKED;
/**
* @brief Request with #MRQ_C2C
*
* |sub-command |payload |
* |-----------------------------|-------------------------------|
* |CMD_C2C_QUERY_ABI |cmd_c2c_query_abi_request |
* |CMD_C2C_START_INITIALIZATION |cmd_c2c_start_init_request |
* |CMD_C2C_GET_STATUS | |
* |CMD_C2C_HOTRESET_PREP |cmd_c2c_hotreset_prep_request |
* |CMD_C2C_START_HOTRESET |cmd_c2c_start_hotreset_request |
*/
struct mrq_c2c_request {
uint32_t cmd;
union {
struct cmd_c2c_query_abi_request c2c_query_abi_req;
struct cmd_c2c_start_init_request c2c_start_init_req;
struct cmd_c2c_hotreset_prep_request c2c_hotreset_prep_req;
struct cmd_c2c_start_hotreset_request c2c_start_hotreset_req;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response to MRQ_C2C
*
* |sub-command |payload |
* |-----------------------------|--------------------------------|
* |CMD_C2C_QUERY_ABI | |
* |CMD_C2C_START_INITIALIZATION |cmd_c2c_start_init_response |
* |CMD_C2C_GET_STATUS |cmd_c2c_get_status_response |
* |CMD_C2C_HOTRESET_PREP | |
* |CMD_C2C_START_HOTRESET |cmd_c2c_start_hotreset_response |
*/
struct mrq_c2c_response {
union {
struct cmd_c2c_start_init_response c2c_start_init_resp;
struct cmd_c2c_get_status_response c2c_get_status_resp;
struct cmd_c2c_start_hotreset_response c2c_start_hotreset_resp;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} */
/** @endcond */
/** @cond (bpmp_t264)
* @ingroup MRQ_Codes
* @def MRQ_PCIE
* @brief Perform a PCIE operation
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_pcie_request
*
* @addtogroup PCIE
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_PCIE.
*/
enum mrq_pcie_cmd {
/** @brief Initialize PCIE EP controller. */
CMD_PCIE_EP_CONTROLLER_INIT = 0,
/** @brief Disable PCIE EP controller. */
CMD_PCIE_EP_CONTROLLER_OFF = 1,
/** @brief Disable PCIE RP controller. */
CMD_PCIE_RP_CONTROLLER_OFF = 100,
CMD_PCIE_MAX,
};
/**
* @brief Request payload for #MRQ_PCIE sub-command #CMD_PCIE_EP_CONTROLLER_INIT.
*/
struct cmd_pcie_ep_controller_init_request {
/**
* @brief PCIe EP controller number.
* Valid entries for T264 are 2, 4 and 5.
*/
uint8_t ep_controller;
/**
* @brief PCIe EP function programming interface code.
* Valid range in HW is [0, 0xFFU], BPMP-FW programs the input value without any check.
* It is up to the requester to send valid input as documented in "PCI CODE AND ID
* ASSIGNMENT SPECIFICATION".
*/
uint8_t progif_code;
/**
* @brief PCIe EP function sub-class code.
* Valid range in HW is [0, 0xFFU], BPMP-FW programs the input value without any check.
* It is up to the requester to send valid input as documented in "PCI CODE AND ID
* ASSIGNMENT SPECIFICATION".
*/
uint8_t subclass_code;
/**
* @brief PCIe EP function base class code.
* Valid range in HW is [0, 0xFFU], BPMP-FW programs the input value without any check.
* It is up to the requester to send valid input as documented in "PCI CODE AND ID
* ASSIGNMENT SPECIFICATION".
*/
uint8_t baseclass_code;
/**
* @brief PCIe EP function device id.
* Valid range is [0, 0x7FU], only LSB 7 bits are writable in 16-bit PCI device id.
* Valid range check is done on input value and returns -BPMP_EINVAL on failure.
*/
uint8_t deviceid;
/**
* @brief PCIe EP EP BAR1 size.
* Valid range is [6U, 16U], which translate to [64MB, 64GB] size.
* Valid range check is done on input value and returns -BPMP_EINVAL on failure.
*/
uint8_t bar1_size;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_PCIE sub-command #CMD_PCIE_EP_CONTROLLER_OFF.
*/
struct cmd_pcie_ep_controller_off_request {
/** @brief EP controller number, T264 valid: 2, 4, 5. */
uint8_t ep_controller;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for #MRQ_PCIE sub-command #CMD_PCIE_RP_CONTROLLER_OFF.
*/
struct cmd_pcie_rp_controller_off_request {
/** @brief RP controller number, T264 valid: 1-5 */
uint8_t rp_controller;
} BPMP_ABI_PACKED;
/**
* @ingroup PCIE
* @brief Request payload for the #MRQ_PCIE command.
*
* Used by the sender of an #MRQ_PCIE message to control PCIE.
* Below table shows sub-commands with their corresponding payload data.
*
* |sub-command |payload |
* |--------------------------------------|-----------------------------------------|
* |#CMD_PCIE_EP_CONTROLLER_INIT |#cmd_pcie_ep_controller_init_request |
* |#CMD_PCIE_EP_CONTROLLER_OFF |#cmd_pcie_ep_controller_off_request |
*
* @cond (!bpmp_safe)
*
* The following additional MRQs are supported on non-functional-safety
* builds:
* |sub-command |payload |
* |--------------------------------------|-----------------------------------------|
* |#CMD_PCIE_RP_CONTROLLER_OFF |#cmd_pcie_rp_controller_off_request |
*
* @endcond
*
*/
struct mrq_pcie_request {
/** @brief Sub-command ID from @ref mrq_pcie_cmd. */
uint32_t cmd;
union {
struct cmd_pcie_ep_controller_init_request ep_ctrlr_init;
struct cmd_pcie_ep_controller_off_request ep_ctrlr_off;
/** @cond (!bpmp_safe) */
struct cmd_pcie_rp_controller_off_request rp_ctrlr_off;
/** @endcond */
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} PCIE */
/** @endcond */
/** @cond (bpmp_t264)
* @ingroup MRQ_Codes
* @def MRQ_CR7
* @brief Perform a CR7 operation
*
* * Initiators: CPU_S
* * Targets: BPMP
* * Request Payload: @ref mrq_cr7_request
*
* @addtogroup CR7
* @{
*/
/**
* @brief Payload for #MRQ_CR7
* 2 fields for future parameters are provided. These must be 0 currently.
*/
struct cmd_cr7_request {
uint32_t fld0;
uint32_t fld1;
} BPMP_ABI_PACKED;
struct cmd_cr7_query_abi_request {
/** #MRQ_CR7 sub-command identifier from @ref mrq_cr7_cmd */
uint32_t type;
} BPMP_ABI_PACKED;
/**
* @brief Sub-command identifiers for #MRQ_CR7.
*/
enum mrq_cr7_cmd {
/**
* @brief Check whether the BPMP driver supports the specified request
* type
*
* mrq_response:: err is 0 if the specified request is supported and
* -#BPMP_ENODEV otherwise
*/
CMD_CR7_QUERY_ABI = 0,
/** @brief Enter CR7 state on the package BPMP-FW is running on. */
CMD_CR7_ENTRY = 1,
/** @brief Exit CR7 state on the package BPMP-FW is running on. */
CMD_CR7_EXIT = 2,
CMD_CR7_MAX,
};
/**
* @ingroup CR7
* @brief #MRQ_CR7 structure
*
* |Sub-command |Payload |
* |----------------------------|---------------------------|
* |#CMD_CR7_QUERY_ABI | #cmd_cr7_query_abi_request|
* |#CMD_CR7_ENTRY | #cmd_cr7_request |
* |#CMD_CR7_EXIT | #cmd_cr7_request |
*/
struct mrq_cr7_request {
/** @brief Sub-command ID from @ref mrq_cr7_cmd. */
uint32_t cmd;
union {
struct cmd_cr7_query_abi_request query_abi;
struct cmd_cr7_request cr7_request;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} CR7 */
/** @endcond */
/** @cond (bpmp_tb500)
* @ingroup MRQ_Codes
* @def MRQ_HWPM
* @brief Configure and query HWPM functionality
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_hwpm_request
* * Response Payload: @ref mrq_hwpm_response
*
* @addtogroup HWPM
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_HWPM.
*/
enum mrq_hwpm_cmd {
/**
* @brief Check whether the BPMP-FW supports the specified
* #MRQ_HWPM sub-command.
*
* mrq_response:err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_HWPM_QUERY_ABI = 1,
/**
* @brief Configure IPMU triggers
*
* mrq_response:err is defined as:
*
* | Value | Description |
* | -------------- | ------------------------------------------- |
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
* | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_HWPM_IPMU_SET_TRIGGERS = 2,
/**
* @brief Configure IPMU payloads and shifts
*
* mrq_response:err is defined as:
*
* | Value | Description |
* | -------------- | ------------------------------------------- |
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
* | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_HWPM_IPMU_SET_PAYLOADS_SHIFTS = 3,
/**
* @brief Get maximum number of payloads
*
* mrq_response:err is defined as:
*
* | Value | Description |
* | -------------- | ------------------------------------------- |
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
* | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
*/
CMD_HWPM_IPMU_GET_MAX_PAYLOADS = 4,
/**
* @brief Configure NVTHERM sample rate
*
* mrq_response:err is defined as:
*
* | Value | Description |
* | -------------- | ------------------------------------------- |
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
* | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_HWPM_NVTHERM_SET_SAMPLE_RATE = 5,
/**
* @brief Set NVTHERM bubble interval
*
* mrq_response:err is defined as:
*
* | Value | Description |
* | -------------- | ------------------------------------------- |
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
* | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_HWPM_NVTHERM_SET_BUBBLE_INTERVAL = 6,
/**
* @brief Configure NVTHERM DG flexible channels
*
* mrq_response:err is defined as:
*
* | Value | Description |
* | -------------- | ------------------------------------------- |
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
* | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_HWPM_NVTHERM_SET_FLEX_CHANNELS = 7,
/**
* @brief Get ISENSE sensor name
*
* mrq_response:err is defined as:
*
* | Value | Description |
* | -------------- | ------------------------------------------- |
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
* | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_HWPM_ISENSE_GET_SENSOR_NAME = 8,
/**
* @brief Get ISENSE sensor channel
*
* mrq_response:err is defined as:
*
* | Value | Description |
* | -------------- | ------------------------------------------- |
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
* | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_HWPM_ISENSE_GET_SENSOR_CHANNEL = 9,
/**
* @brief Get ISENSE sensor scale factor
*
* mrq_response:err is defined as:
*
* | Value | Description |
* | -------------- | ------------------------------------------- |
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
* | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_HWPM_ISENSE_GET_SENSOR_SCALE_FACTOR = 10,
/**
* @brief Get ISENSE sensor offset
*
* mrq_response:err is defined as:
*
* | Value | Description |
* | -------------- | ------------------------------------------- |
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
* | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
* | -#BPMP_ENODATA | No sensor offset. |
*/
CMD_HWPM_ISENSE_GET_SENSOR_OFFSET = 11,
/**
* @brief Get ISENSE sum block name
*
* mrq_response:err is defined as:
*
* | Value | Description |
* | -------------- | ------------------------------------------- |
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
* | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_HWPM_ISENSE_GET_SUM_BLOCK_NAME = 12,
/**
* @brief Get ISENSE sum input sensor IDs
*
* mrq_response:err is defined as:
*
* | Value | Description |
* | -------------- | ------------------------------------------- |
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_HWPM is not supported by BPMP-FW. |
* | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_HWPM_ISENSE_GET_SUM_BLOCK_INPUTS = 13,
/**
* @brief Largest supported #MRQ_HWPM sub-command identifier + 1
*/
CMD_HWPM_MAX,
};
/**
* @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_QUERY_ABI
*/
struct cmd_hwpm_query_abi_req {
/** @brief Sub-command identifier from @ref mrq_hwpm_cmd */
uint32_t cmd_code;
} BPMP_ABI_PACKED;
/**
* @brief Maximum array length for IPMU trigger bitmask
*/
#define HWPM_IPMU_TRIGGER_ARR_LEN 28U
/**
* @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_IPMU_SET_TRIGGERS
*/
struct cmd_hwpm_ipmu_set_triggers_req {
/** @brief IPMU physical ID
*
* @note Valid range from [0, MAX_CPU_CORES), see @ref bpmp_hwpm_core_config
*/
uint32_t ipmu_phys_id;
/** @brief Trigger bitmask, see @ref bpmp_ipmu_trigger_ids
*
* @note Setting a trigger bit will cause the associated trigger to
* generate an output packet from IPMU to the HWPM perfmux.
* @note Up to a maximum possible 896 triggers
*/
uint32_t triggers[HWPM_IPMU_TRIGGER_ARR_LEN];
} BPMP_ABI_PACKED;
/**
* @brief Array length for IPMU payload bitmask
*/
#define HWPM_IPMU_PAYLOAD_ARR_LEN 26U
/**
* @brief Array length for IPMU payload shift bitmask
*/
#define HWPM_IPMU_SHIFT_ARR_LEN 2U
/**
* @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_IPMU_SET_PAYLOADS_SHIFTS
*/
struct cmd_hwpm_ipmu_set_payloads_shifts_req {
/** @brief IPMU physical ID
*
* @note Valid range from [0, MAX_CPU_CORES), see @ref bpmp_hwpm_core_config
*/
uint32_t ipmu_phys_id;
/** @brief Payload bitmask, see @ref bpmp_ipmu_payload_ids
*
* @note Setting a payload bit will add the associated payload to the
* IPMU output packet.
* @note The maximum number of payloads is platform dependent,
* @see #CMD_HWPM_IPMU_GET_MAX_PAYLOADS
* @note To disable IPMU streaming on this instance, set all payload bits to 0.
* @note Up to a maximum of 832 available payloads
*/
uint32_t payloads[HWPM_IPMU_PAYLOAD_ARR_LEN];
/**
* @brief Payload shift mask
*
* @note Setting the i-th shift bit will right-shift the
* i-th enabled payload by 1 bit.
* @note Up to a maximum of 64 simultaneous emitted payloads
*/
uint32_t shifts[HWPM_IPMU_SHIFT_ARR_LEN];
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_IPMU_GET_MAX_PAYLOADS
*/
struct cmd_hwpm_ipmu_get_max_payloads_req {
BPMP_ABI_EMPTY
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_NVTHERM_SET_SAMPLE_RATE
*/
struct cmd_hwpm_nvtherm_set_sample_rate_req {
/** @brief Sample rate in microseconds
*
* @note Requesting a sample rate of 0 will disable NVTHERM streaming.
*/
uint32_t sample_rate;
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_NVTHERM_SET_BUBBLE_INTERVAL
*/
struct cmd_hwpm_nvtherm_set_bubble_interval_req {
/** @brief Bubble interval in microseconds */
uint32_t bubble_interval;
} BPMP_ABI_PACKED;
/**
* @brief Maximum array length for NVTHERM flexible channel bitmask
*/
#define HWPM_NVTHERM_FLEX_CHANNEL_ARR_LEN 29U
/**
* @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_NVTHERM_SET_FLEX_CHANNELS
*/
struct cmd_hwpm_nvtherm_set_flex_channels_req {
/** @brief NVTHERM flexible channel bitmask
*
* @see #bpmp_nvtherm_flex_channel_ids
*
* @note Up to a maximum of 928 flexible channels
*/
uint32_t channels[HWPM_NVTHERM_FLEX_CHANNEL_ARR_LEN];
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SENSOR_NAME
*/
struct cmd_hwpm_isense_get_sensor_name_req {
/** @brief Sensor ID from @ref bpmp_isense_sensor_ids */
uint32_t sensor_id;
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SENSOR_CHANNEL
*/
struct cmd_hwpm_isense_get_sensor_channel_req {
/** @brief Sensor ID from @ref bpmp_isense_sensor_ids */
uint32_t sensor_id;
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SENSOR_SCALE_FACTOR
*/
struct cmd_hwpm_isense_get_sensor_scale_factor_req {
/** @brief Sensor ID from @ref bpmp_isense_sensor_ids */
uint32_t sensor_id;
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SENSOR_OFFSET
*/
struct cmd_hwpm_isense_get_sensor_offset_req {
/** @brief Sensor ID from @ref bpmp_isense_sensor_ids */
uint32_t sensor_id;
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SUM_BLOCK_NAME
*/
struct cmd_hwpm_isense_get_sum_block_name_req {
/** @brief Sum block index */
uint32_t sum_block_index;
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SUM_BLOCK_INPUTS
*/
struct cmd_hwpm_isense_get_sum_block_inputs_req {
/** @brief Sum block index */
uint32_t sum_block_index;
} BPMP_ABI_PACKED;
/**
* @brief Response data for #MRQ_HWPM sub-command #CMD_HWPM_IPMU_GET_MAX_PAYLOADS
*/
struct cmd_hwpm_ipmu_get_max_payloads_resp {
/** @brief Maximum number of payloads */
uint32_t max_payloads;
} BPMP_ABI_PACKED;
/**
* @brief Maximum array length for ISENSE sensor name
*/
#define HWPM_ISENSE_SENSOR_MAX_NAME_LEN 64U
/**
* @brief Response data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SENSOR_NAME
*/
struct cmd_hwpm_isense_get_sensor_name_resp {
/** @brief Sensor name */
char sensor_name[HWPM_ISENSE_SENSOR_MAX_NAME_LEN];
} BPMP_ABI_PACKED;
/**
* @brief Response data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SENSOR_CHANNEL
*/
struct cmd_hwpm_isense_get_sensor_channel_resp {
/** @brief Physical channel index */
uint32_t channel_index;
} BPMP_ABI_PACKED;
/**
* @brief Response data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SENSOR_SCALE_FACTOR
*/
struct cmd_hwpm_isense_get_sensor_scale_factor_resp {
/** @brief Scale factor */
float scale_factor;
} BPMP_ABI_PACKED;
/**
* @brief Response data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SENSOR_OFFSET
*/
struct cmd_hwpm_isense_get_sensor_offset_resp {
/** @brief Offset sensor ID */
uint32_t offset_sensor_id;
} BPMP_ABI_PACKED;
/**
* @brief Maximum array length for ISENSE sum name
*/
#define HWPM_ISENSE_SUM_BLOCK_MAX_NAME_LEN 64U
/**
* @brief Response data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SUM_BLOCK_NAME
*/
struct cmd_hwpm_isense_get_sum_block_name_resp {
/** @brief Sum block name */
char sum_block_name[HWPM_ISENSE_SUM_BLOCK_MAX_NAME_LEN];
} BPMP_ABI_PACKED;
/**
* @brief Maximum array length for ISENSE sum block input sensor IDs
*/
#define HWPM_ISENSE_SUM_BLOCK_INPUTS_MAX 16U
/**
* @brief Response data for #MRQ_HWPM sub-command #CMD_HWPM_ISENSE_GET_SUM_BLOCK_INPUTS
*/
struct cmd_hwpm_isense_get_sum_block_inputs_resp {
/** @brief Input channel indices; negative if no input is applied */
int32_t input_channel_idx[HWPM_ISENSE_SUM_BLOCK_INPUTS_MAX];
} BPMP_ABI_PACKED;
/**
* @brief Request payload for the #MRQ_HWPM -command
*
* | Sub-command | Request payload |
* | ---------------------------------------- | -------------------------------------------- |
* | #CMD_HWPM_QUERY_ABI | #cmd_hwpm_query_abi_req |
* | #CMD_HWPM_IPMU_SET_TRIGGERS | #cmd_hwpm_ipmu_set_triggers_req |
* | #CMD_HWPM_IPMU_SET_PAYLOADS_SHIFTS | #cmd_hwpm_ipmu_set_payloads_shifts_req |
* | #CMD_HWPM_IPMU_GET_MAX_PAYLOADS | #cmd_hwpm_ipmu_get_max_payloads_req |
* | #CMD_HWPM_NVTHERM_SET_SAMPLE_RATE | #cmd_hwpm_nvtherm_set_sample_rate_req |
* | #CMD_HWPM_NVTHERM_SET_BUBBLE_INTERVAL | #cmd_hwpm_nvtherm_set_bubble_interval_req |
* | #CMD_HWPM_NVTHERM_SET_FLEX_CHANNELS | #cmd_hwpm_nvtherm_set_flex_channels_req |
* | #CMD_HWPM_ISENSE_GET_SENSOR_CHANNEL | #cmd_hwpm_isense_get_sensor_channel_req |
* | #CMD_HWPM_ISENSE_GET_SENSOR_SCALE_FACTOR | #cmd_hwpm_isense_get_sensor_scale_factor_req |
* | #CMD_HWPM_ISENSE_GET_SENSOR_OFFSET | #cmd_hwpm_isense_get_sensor_offset_req |
* | #CMD_HWPM_ISENSE_GET_SUM_BLOCK_NAME | #cmd_hwpm_isense_get_sum_block_name_req |
* | #CMD_HWPM_ISENSE_GET_SUM_BLOCK_INPUTS | #cmd_hwpm_isense_get_sum_block_inputs_req |
*/
struct mrq_hwpm_request {
uint32_t cmd;
union {
struct cmd_hwpm_query_abi_req query_abi;
struct cmd_hwpm_ipmu_set_triggers_req ipmu_set_triggers;
struct cmd_hwpm_ipmu_set_payloads_shifts_req ipmu_set_payloads_shifts;
struct cmd_hwpm_ipmu_get_max_payloads_req ipmu_get_max_payloads;
struct cmd_hwpm_nvtherm_set_sample_rate_req nvtherm_set_sample_rate;
struct cmd_hwpm_nvtherm_set_bubble_interval_req nvtherm_set_bubble_interval;
struct cmd_hwpm_nvtherm_set_flex_channels_req nvtherm_set_flex_channels;
struct cmd_hwpm_isense_get_sensor_name_req isense_get_sensor_name;
struct cmd_hwpm_isense_get_sensor_channel_req isense_get_sensor_channel;
struct cmd_hwpm_isense_get_sensor_scale_factor_req isense_get_sensor_scale_factor;
struct cmd_hwpm_isense_get_sensor_offset_req isense_get_sensor_offset;
struct cmd_hwpm_isense_get_sum_block_name_req isense_get_sum_block_name;
struct cmd_hwpm_isense_get_sum_block_inputs_req isense_get_sum_block_inputs;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for the #MRQ_HWPM -command
*
* | Sub-command | Response payload |
* | ---------------------------------------- | --------------------------------------------- |
* | #CMD_HWPM_QUERY_ABI | - |
* | #CMD_HWPM_IPMU_SET_TRIGGERS | - |
* | #CMD_HWPM_IPMU_SET_PAYLOADS_SHIFTS | - |
* | #CMD_HWPM_IPMU_GET_MAX_PAYLOADS | #cmd_hwpm_ipmu_get_max_payloads_resp |
* | #CMD_HWPM_NVTHERM_SET_SAMPLE_RATE | - |
* | #CMD_HWPM_NVTHERM_SET_BUBBLE_INTERVAL | - |
* | #CMD_HWPM_NVTHERM_SET_FLEX_CHANNELS | - |
* | #CMD_HWPM_ISENSE_GET_SENSOR_NAME | #cmd_hwpm_isense_get_sensor_name_resp |
* | #CMD_HWPM_ISENSE_GET_SENSOR_CHANNEL | #cmd_hwpm_isense_get_sensor_channel_resp |
* | #CMD_HWPM_ISENSE_GET_SENSOR_SCALE_FACTOR | #cmd_hwpm_isense_get_sensor_scale_factor_resp |
* | #CMD_HWPM_ISENSE_GET_SENSOR_OFFSET | #cmd_hwpm_isense_get_sensor_offset_resp |
* | #CMD_HWPM_ISENSE_GET_SUM_BLOCK_NAME | #cmd_hwpm_isense_get_sum_block_name_resp |
* | #CMD_HWPM_ISENSE_GET_SUM_BLOCK_INPUTS | #cmd_hwpm_isense_get_sum_block_inputs_resp |
*/
struct mrq_hwpm_response {
uint32_t err;
union {
struct cmd_hwpm_ipmu_get_max_payloads_resp ipmu_get_max_payloads;
struct cmd_hwpm_isense_get_sensor_name_resp isense_get_sensor_name;
struct cmd_hwpm_isense_get_sensor_channel_resp isense_get_sensor_channel;
struct cmd_hwpm_isense_get_sensor_scale_factor_resp isense_get_sensor_scale_factor;
struct cmd_hwpm_isense_get_sensor_offset_resp isense_get_sensor_offset;
struct cmd_hwpm_isense_get_sum_block_name_resp isense_get_sum_block_name;
struct cmd_hwpm_isense_get_sum_block_inputs_resp isense_get_sum_block_inputs;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} HWPM */
/** @endcond */
/** @cond (bpmp_tb500)
* @ingroup MRQ_Codes
* @def MRQ_DVFS
* @brief Configure DVFS functionality
*
* * Initiators: CCPLEX
* * Targets: BPMP
* * Request Payload: @ref mrq_dvfs_request
*
* @addtogroup DVFS
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_DVFS.
*/
enum mrq_dvfs_cmd {
/**
* @brief Check whether the BPMP-FW supports the specified
* #MRQ_DVFS sub-command.
*
* mrq_response:err is 0 if the specified request is
* supported and -#BPMP_ENODEV otherwise.
*/
CMD_DVFS_QUERY_ABI = 1,
/**
* @brief Configure DVFS controller
*
* mrq_response:err is defined as:
*
* | Value | Description |
* | -------------- | ------------------------------------------- |
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_DVFS is not supported by BPMP-FW. |
* | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_DVFS_SET_CTRL_STATE = 2,
/**
* @brief Configure DVFS manager
*
* mrq_response:err is defined as:
*
* | Value | Description |
* | -------------- | ------------------------------------------- |
* | 0 | Success |
* | -#BPMP_ENODEV | #MRQ_DVFS is not supported by BPMP-FW. |
* | -#BPMP_ENOTSUP | Subcommand is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_DVFS_SET_MGR_STATE = 3,
/**
* @brief Largest supported #MRQ_DVFS sub-command identifier + 1
*/
CMD_DVFS_MAX,
};
/**
* @brief Request data for #MRQ_DVFS sub-command #CMD_DVFS_QUERY_ABI
*/
struct cmd_dvfs_query_abi_req {
/** @brief Sub-command identifier from @ref mrq_dvfs_cmd */
uint32_t cmd_code;
} BPMP_ABI_PACKED;
struct cmd_dvfs_set_ctrl_state_req {
/** @brief Controller ID from @ref bpmp_dvfs_ctrl_ids */
uint32_t ctrl_id;
/** @brief Controller enable state */
uint32_t enable;
} BPMP_ABI_PACKED;
struct cmd_dvfs_set_mgr_state_req {
/** @brief Manager ID from @ref bpmp_dvfs_mgr_ids */
uint32_t mgr_id;
/** @brief Manager enable state */
uint32_t enable;
} BPMP_ABI_PACKED;
/**
* @brief Request payload for the #MRQ_DVFS -command
*
* | Sub-command | Request payload |
* | ---------------------------------------- | -------------------------------------------- |
* | #CMD_DVFS_QUERY_ABI | #cmd_dvfs_query_abi_req |
* | #CMD_DVFS_SET_CTRL_STATE | #cmd_dvfs_set_ctrl_state_req |
* | #CMD_DVFS_SET_MGR_STATE | #cmd_dvfs_set_mgr_state_req |
*/
struct mrq_dvfs_request {
uint32_t cmd;
union {
struct cmd_dvfs_query_abi_req query_abi;
struct cmd_dvfs_set_ctrl_state_req set_ctrl_state;
struct cmd_dvfs_set_mgr_state_req set_mgr_state;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} DVFS */
/** @endcond */
/** @cond (bpmp_tb500)
* @ingroup MRQ_Codes
* @def MRQ_PPP_PROFILE
* @brief Get power/performance profile configuration settings.
*
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_ppp_profile_request
* * Response Payload: @ref mrq_ppp_profile_response
*
* @addtogroup PPP
* @{
*/
/**
* @brief Sub-command identifiers for #MRQ_PPP_PROFILE.
*/
enum mrq_ppp_profile_cmd {
/**
* @brief Check whether the BPMP-FW supports the specified
* #MRQ_PPP_PROFILE sub-command.
*
* mrq_ppp_profile_response:err is 0 if the specified request is
* supported and -#BPMP_ENOTSUP otherwise.
*/
CMD_PPP_PROFILE_QUERY_ABI = 0,
/**
* @brief Query the BPMP for the CPU core and SLC slice configuration associated
* with a given Power/Performance Profile (PPP).
*
* mrq_ppp_profile_response:err is defined as:
*
* | Value | Description |
* |----------------|------------------------------------------------|
* | 0 | Success |
* | -#BPMP_ENOTSUP | #MRQ_PPP_PROFILE is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_PPP_PROFILE_QUERY_MASKS = 1,
/**
* @brief Query BPMP for the CPU mask corresponding to a requested
* number of active CPU cores.
*
* mrq_ppp_profile_response:err is defined as:
*
* | Value | Description |
* |----------------|------------------------------------------------|
* | 0 | Success |
* | -#BPMP_ENOTSUP | #MRQ_PPP_PROFILE is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_PPP_CORE_QUERY_CPU_MASK = 2,
/**
* @brief Query BPMP-FW for the currently available Power/Performance Profiles.
*
* mrq_ppp_profile_response:err is defined as:
*
* | Value | Description |
* |----------------|------------------------------------------------|
* | 0 | Success |
* | -#BPMP_ENOTSUP | #MRQ_PPP_PROFILE is not supported by BPMP-FW. |
* | -#BPMP_EINVAL | Invalid request parameters. |
*/
CMD_PPP_AVAILABLE_QUERY = 3,
};
/**
* @brief Request data for #MRQ_PPP_PROFILE sub-command
* #CMD_PPP_PROFILE_QUERY_ABI
*/
struct cmd_ppp_profile_query_abi_req {
/** @brief Sub-command identifier from @ref mrq_ppp_profile_cmd */
uint32_t cmd_code;
} BPMP_ABI_PACKED;
/**
* @brief Response data for #MRQ_PPP_PROFILE sub-command
* #CMD_PPP_AVAILABLE_QUERY
*/
struct cmd_ppp_available_query_resp {
/**
* @brief Bitmask of available profiles.
* Bit N = 1 ⇒ profile N is available
*/
uint32_t avail_ppp_mask;
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_PPP_PROFILE sub-command
* #CMD_PPP_PROFILE_QUERY_MASKS
*/
struct cmd_ppp_profile_query_masks_req {
/** @brief power/perf profile identifier */
uint32_t profile_id;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for #MRQ_PPP_PROFILE sub-command
* #CMD_PPP_PROFILE_QUERY_MASKS
*/
struct cmd_ppp_profile_query_masks_resp {
/** @brief Enabled cores in this profile */
uint32_t num_active_cores;
/** @brief Enabled SLC slices in this profile */
uint32_t num_active_slcs;
/** @brief Number of valid words in active_core_masks array */
uint32_t max_num_core_words;
/** @brief Number of valid words in active_slc_masks array */
uint32_t max_num_slc_words;
/** @brief Enabled cores bit mask (bit N = 1 => core N enabled) */
uint32_t active_core_masks[8];
/** @brief Enabled SLC slices bit mask (bit N = 1 => SLC slice N enabled) */
uint32_t active_slc_masks[8];
} BPMP_ABI_PACKED;
/**
* @brief Request data for #MRQ_PPP_PROFILE sub-command
* #CMD_PPP_CORE_QUERY_CPU_MASK
*/
struct cmd_ppp_core_query_cpu_mask_req {
/** @brief Requested number of active cores */
uint32_t num_cores;
} BPMP_ABI_PACKED;
/**
* @brief Response data for #MRQ_PPP_PROFILE sub-command
* #CMD_PPP_CORE_QUERY_CPU_MASK
*/
struct cmd_ppp_core_query_cpu_mask_resp {
/** @brief Number of valid words in active_core_masks array */
uint32_t max_num_words;
/** @brief Enabled CPU core bitmask (bit N = 1 ⇒ core N enabled) */
uint32_t active_core_masks[8];
} BPMP_ABI_PACKED;
/**
* @brief Request payload for the #MRQ_PPP_PROFILE -command
*
* | Sub-command | Request payload |
* |-------------------------------|----------------------------------------|
* | #CMD_PPP_PROFILE_QUERY_ABI | #cmd_ppp_profile_query_abi_req |
* | #CMD_PPP_PROFILE_QUERY_MASKS | #cmd_ppp_profile_query_masks_req |
* | #CMD_PPP_CORE_QUERY_CPU_MASK | #cmd_ppp_core_query_cpu_mask_req |
* | #CMD_PPP_AVAILABLE_QUERY | - |
*/
struct mrq_ppp_profile_request {
/** @brief Sub-command ID from @ref mrq_ppp_profile_cmd. */
uint32_t cmd;
union {
struct cmd_ppp_profile_query_abi_req query_abi;
struct cmd_ppp_profile_query_masks_req ppp_profile_masks_req;
struct cmd_ppp_core_query_cpu_mask_req ppp_core_mask_req;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/**
* @brief Response payload for the #MRQ_PPP_PROFILE -command.
*
* | Sub-command | Response payload |
* |-------------------------------|----------------------------------------|
* | #CMD_PPP_PROFILE_QUERY_ABI | - |
* | #CMD_PPP_PROFILE_QUERY_MASKS | #cmd_ppp_profile_query_masks_resp |
* | #CMD_PPP_CORE_QUERY_CPU_MASK | #cmd_ppp_core_query_cpu_mask_resp |
* | #CMD_PPP_AVAILABLE_QUERY | #cmd_ppp_available_query_resp |
*/
struct mrq_ppp_profile_response {
uint32_t err;
union {
struct cmd_ppp_profile_query_masks_resp ppp_profile_masks_resp;
struct cmd_ppp_core_query_cpu_mask_resp ppp_core_mask_resp;
struct cmd_ppp_available_query_resp ppp_avail_query_resp;
} BPMP_UNION_ANON;
} BPMP_ABI_PACKED;
/** @} PPP */
/** @endcond */
/**
* @addtogroup Error_Codes
* Negative values for mrq_response::err generally indicate some
* error. The ABI defines the following error codes. Negating these
* defines is an exercise left to the user.
* @{
*/
/** @brief Operation not permitted */
#define BPMP_EPERM 1
/** @brief No such file or directory */
#define BPMP_ENOENT 2
/** @brief No MRQ handler */
#define BPMP_ENOHANDLER 3
/** @brief I/O error */
#define BPMP_EIO 5
/** @brief Bad sub-MRQ command */
#define BPMP_EBADCMD 6
/** @brief Resource temporarily unavailable */
#define BPMP_EAGAIN 11
/** @brief Not enough memory */
#define BPMP_ENOMEM 12
/** @brief Permission denied */
#define BPMP_EACCES 13
/** @brief Bad address */
#define BPMP_EFAULT 14
/** @brief Resource busy */
#define BPMP_EBUSY 16
/** @brief No such device */
#define BPMP_ENODEV 19
/** @brief Argument is a directory */
#define BPMP_EISDIR 21
/** @brief Invalid argument */
#define BPMP_EINVAL 22
/** @brief Timeout during operation */
#define BPMP_ETIMEDOUT 23
/** @brief Out of range */
#define BPMP_ERANGE 34
/** @brief Function not implemented */
#define BPMP_ENOSYS 38
/** @brief Invalid slot */
#define BPMP_EBADSLT 57
/** @brief No data */
#define BPMP_ENODATA 61
/** @brief Invalid message */
#define BPMP_EBADMSG 77
/** @brief Operation not supported */
#define BPMP_EOPNOTSUPP 95
/** @brief Targeted resource not available */
#define BPMP_ENAVAIL 119
/** @brief Not supported */
#define BPMP_ENOTSUP 134
/** @brief No such device or address */
#define BPMP_ENXIO 140
/** @} Error_Codes */
#if defined(BPMP_ABI_CHECKS)
#include "bpmp_abi_checks.h"
#endif
#endif