| /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ | |
| /* | |
| * Copyright(c) 2016 - 2020 Intel Corporation. | |
| */ | |
| #ifndef DEF_RDMAVT_INCQP_H | |
| #define DEF_RDMAVT_INCQP_H | |
| #include <rdma/rdma_vt.h> | |
| #include <rdma/ib_pack.h> | |
| #include <rdma/ib_verbs.h> | |
| #include <rdma/rdmavt_cq.h> | |
| #include <rdma/rvt-abi.h> | |
| #include <linux/vmalloc.h> | |
| /* | |
| * Atomic bit definitions for r_aflags. | |
| */ | |
| #define RVT_R_WRID_VALID 0 | |
| #define RVT_R_REWIND_SGE 1 | |
| /* | |
| * Bit definitions for r_flags. | |
| */ | |
| #define RVT_R_REUSE_SGE 0x01 | |
| #define RVT_R_RDMAR_SEQ 0x02 | |
| #define RVT_R_RSP_NAK 0x04 | |
| #define RVT_R_RSP_SEND 0x08 | |
| #define RVT_R_COMM_EST 0x10 | |
| /* | |
| * If a packet's QP[23:16] bits match this value, then it is | |
| * a PSM packet and the hardware will expect a KDETH header | |
| * following the BTH. | |
| */ | |
| #define RVT_KDETH_QP_PREFIX 0x80 | |
| #define RVT_KDETH_QP_SUFFIX 0xffff | |
| #define RVT_KDETH_QP_PREFIX_MASK 0x00ff0000 | |
| #define RVT_KDETH_QP_PREFIX_SHIFT 16 | |
| #define RVT_KDETH_QP_BASE (u32)(RVT_KDETH_QP_PREFIX << \ | |
| RVT_KDETH_QP_PREFIX_SHIFT) | |
| #define RVT_KDETH_QP_MAX (u32)(RVT_KDETH_QP_BASE + RVT_KDETH_QP_SUFFIX) | |
| /* | |
| * If a packet's LNH == BTH and DEST QPN[23:16] in the BTH match this | |
| * prefix value, then it is an AIP packet with a DETH containing the entropy | |
| * value in byte 4 following the BTH. | |
| */ | |
| #define RVT_AIP_QP_PREFIX 0x81 | |
| #define RVT_AIP_QP_SUFFIX 0xffff | |
| #define RVT_AIP_QP_PREFIX_MASK 0x00ff0000 | |
| #define RVT_AIP_QP_PREFIX_SHIFT 16 | |
| #define RVT_AIP_QP_BASE (u32)(RVT_AIP_QP_PREFIX << \ | |
| RVT_AIP_QP_PREFIX_SHIFT) | |
| #define RVT_AIP_QPN_MAX BIT(RVT_AIP_QP_PREFIX_SHIFT) | |
| #define RVT_AIP_QP_MAX (u32)(RVT_AIP_QP_BASE + RVT_AIP_QPN_MAX - 1) | |
| /* | |
| * Bit definitions for s_flags. | |
| * | |
| * RVT_S_SIGNAL_REQ_WR - set if QP send WRs contain completion signaled | |
| * RVT_S_BUSY - send tasklet is processing the QP | |
| * RVT_S_TIMER - the RC retry timer is active | |
| * RVT_S_ACK_PENDING - an ACK is waiting to be sent after RDMA read/atomics | |
| * RVT_S_WAIT_FENCE - waiting for all prior RDMA read or atomic SWQEs | |
| * before processing the next SWQE | |
| * RVT_S_WAIT_RDMAR - waiting for a RDMA read or atomic SWQE to complete | |
| * before processing the next SWQE | |
| * RVT_S_WAIT_RNR - waiting for RNR timeout | |
| * RVT_S_WAIT_SSN_CREDIT - waiting for RC credits to process next SWQE | |
| * RVT_S_WAIT_DMA - waiting for send DMA queue to drain before generating | |
| * next send completion entry not via send DMA | |
| * RVT_S_WAIT_PIO - waiting for a send buffer to be available | |
| * RVT_S_WAIT_TX - waiting for a struct verbs_txreq to be available | |
| * RVT_S_WAIT_DMA_DESC - waiting for DMA descriptors to be available | |
| * RVT_S_WAIT_KMEM - waiting for kernel memory to be available | |
| * RVT_S_WAIT_PSN - waiting for a packet to exit the send DMA queue | |
| * RVT_S_WAIT_ACK - waiting for an ACK packet before sending more requests | |
| * RVT_S_SEND_ONE - send one packet, request ACK, then wait for ACK | |
| * RVT_S_ECN - a BECN was queued to the send engine | |
| * RVT_S_MAX_BIT_MASK - The max bit that can be used by rdmavt | |
| */ | |
| #define RVT_S_SIGNAL_REQ_WR 0x0001 | |
| #define RVT_S_BUSY 0x0002 | |
| #define RVT_S_TIMER 0x0004 | |
| #define RVT_S_RESP_PENDING 0x0008 | |
| #define RVT_S_ACK_PENDING 0x0010 | |
| #define RVT_S_WAIT_FENCE 0x0020 | |
| #define RVT_S_WAIT_RDMAR 0x0040 | |
| #define RVT_S_WAIT_RNR 0x0080 | |
| #define RVT_S_WAIT_SSN_CREDIT 0x0100 | |
| #define RVT_S_WAIT_DMA 0x0200 | |
| #define RVT_S_WAIT_PIO 0x0400 | |
| #define RVT_S_WAIT_TX 0x0800 | |
| #define RVT_S_WAIT_DMA_DESC 0x1000 | |
| #define RVT_S_WAIT_KMEM 0x2000 | |
| #define RVT_S_WAIT_PSN 0x4000 | |
| #define RVT_S_WAIT_ACK 0x8000 | |
| #define RVT_S_SEND_ONE 0x10000 | |
| #define RVT_S_UNLIMITED_CREDIT 0x20000 | |
| #define RVT_S_ECN 0x40000 | |
| #define RVT_S_MAX_BIT_MASK 0x800000 | |
| /* | |
| * Drivers should use s_flags starting with bit 31 down to the bit next to | |
| * RVT_S_MAX_BIT_MASK | |
| */ | |
| /* | |
| * Wait flags that would prevent any packet type from being sent. | |
| */ | |
| #define RVT_S_ANY_WAIT_IO \ | |
| (RVT_S_WAIT_PIO | RVT_S_WAIT_TX | \ | |
| RVT_S_WAIT_DMA_DESC | RVT_S_WAIT_KMEM) | |
| /* | |
| * Wait flags that would prevent send work requests from making progress. | |
| */ | |
| #define RVT_S_ANY_WAIT_SEND (RVT_S_WAIT_FENCE | RVT_S_WAIT_RDMAR | \ | |
| RVT_S_WAIT_RNR | RVT_S_WAIT_SSN_CREDIT | RVT_S_WAIT_DMA | \ | |
| RVT_S_WAIT_PSN | RVT_S_WAIT_ACK) | |
| #define RVT_S_ANY_WAIT (RVT_S_ANY_WAIT_IO | RVT_S_ANY_WAIT_SEND) | |
| /* Number of bits to pay attention to in the opcode for checking qp type */ | |
| #define RVT_OPCODE_QP_MASK 0xE0 | |
| /* Flags for checking QP state (see ib_rvt_state_ops[]) */ | |
| #define RVT_POST_SEND_OK 0x01 | |
| #define RVT_POST_RECV_OK 0x02 | |
| #define RVT_PROCESS_RECV_OK 0x04 | |
| #define RVT_PROCESS_SEND_OK 0x08 | |
| #define RVT_PROCESS_NEXT_SEND_OK 0x10 | |
| #define RVT_FLUSH_SEND 0x20 | |
| #define RVT_FLUSH_RECV 0x40 | |
| #define RVT_PROCESS_OR_FLUSH_SEND \ | |
| (RVT_PROCESS_SEND_OK | RVT_FLUSH_SEND) | |
| #define RVT_SEND_OR_FLUSH_OR_RECV_OK \ | |
| (RVT_PROCESS_SEND_OK | RVT_FLUSH_SEND | RVT_PROCESS_RECV_OK) | |
| /* | |
| * Internal send flags | |
| */ | |
| #define RVT_SEND_RESERVE_USED IB_SEND_RESERVED_START | |
| #define RVT_SEND_COMPLETION_ONLY (IB_SEND_RESERVED_START << 1) | |
| /** | |
| * struct rvt_ud_wr - IB UD work plus AH cache | |
| * @wr: valid IB work request | |
| * @attr: pointer to an allocated AH attribute | |
| * | |
| * Special case the UD WR so we can keep track of the AH attributes. | |
| * | |
| * NOTE: This data structure is stricly ordered wr then attr. I.e the attr | |
| * MUST come after wr. The ib_ud_wr is sized and copied in rvt_post_one_wr. | |
| * The copy assumes that wr is first. | |
| */ | |
| struct rvt_ud_wr { | |
| struct ib_ud_wr wr; | |
| struct rdma_ah_attr *attr; | |
| }; | |
| /* | |
| * Send work request queue entry. | |
| * The size of the sg_list is determined when the QP is created and stored | |
| * in qp->s_max_sge. | |
| */ | |
| struct rvt_swqe { | |
| union { | |
| struct ib_send_wr wr; /* don't use wr.sg_list */ | |
| struct rvt_ud_wr ud_wr; | |
| struct ib_reg_wr reg_wr; | |
| struct ib_rdma_wr rdma_wr; | |
| struct ib_atomic_wr atomic_wr; | |
| }; | |
| u32 psn; /* first packet sequence number */ | |
| u32 lpsn; /* last packet sequence number */ | |
| u32 ssn; /* send sequence number */ | |
| u32 length; /* total length of data in sg_list */ | |
| void *priv; /* driver dependent field */ | |
| struct rvt_sge sg_list[]; | |
| }; | |
| /** | |
| * struct rvt_krwq - kernel struct receive work request | |
| * @p_lock: lock to protect producer of the kernel buffer | |
| * @head: index of next entry to fill | |
| * @c_lock: lock to protect consumer of the kernel buffer | |
| * @tail: index of next entry to pull | |
| * @count: count is approximate of total receive entries posted | |
| * @curr_wq: struct of receive work request queue entry | |
| * | |
| * This structure is used to contain the head pointer, | |
| * tail pointer and receive work queue entries for kernel | |
| * mode user. | |
| */ | |
| struct rvt_krwq { | |
| spinlock_t p_lock; /* protect producer */ | |
| u32 head; /* new work requests posted to the head */ | |
| /* protect consumer */ | |
| spinlock_t c_lock ____cacheline_aligned_in_smp; | |
| u32 tail; /* receives pull requests from here. */ | |
| u32 count; /* approx count of receive entries posted */ | |
| struct rvt_rwqe *curr_wq; | |
| struct rvt_rwqe wq[]; | |
| }; | |
| /* | |
| * rvt_get_swqe_ah - Return the pointer to the struct rvt_ah | |
| * @swqe: valid Send WQE | |
| * | |
| */ | |
| static inline struct rvt_ah *rvt_get_swqe_ah(struct rvt_swqe *swqe) | |
| { | |
| return ibah_to_rvtah(swqe->ud_wr.wr.ah); | |
| } | |
| /** | |
| * rvt_get_swqe_ah_attr - Return the cached ah attribute information | |
| * @swqe: valid Send WQE | |
| * | |
| */ | |
| static inline struct rdma_ah_attr *rvt_get_swqe_ah_attr(struct rvt_swqe *swqe) | |
| { | |
| return swqe->ud_wr.attr; | |
| } | |
| /** | |
| * rvt_get_swqe_remote_qpn - Access the remote QPN value | |
| * @swqe: valid Send WQE | |
| * | |
| */ | |
| static inline u32 rvt_get_swqe_remote_qpn(struct rvt_swqe *swqe) | |
| { | |
| return swqe->ud_wr.wr.remote_qpn; | |
| } | |
| /** | |
| * rvt_get_swqe_remote_qkey - Acces the remote qkey value | |
| * @swqe: valid Send WQE | |
| * | |
| */ | |
| static inline u32 rvt_get_swqe_remote_qkey(struct rvt_swqe *swqe) | |
| { | |
| return swqe->ud_wr.wr.remote_qkey; | |
| } | |
| /** | |
| * rvt_get_swqe_pkey_index - Access the pkey index | |
| * @swqe: valid Send WQE | |
| * | |
| */ | |
| static inline u16 rvt_get_swqe_pkey_index(struct rvt_swqe *swqe) | |
| { | |
| return swqe->ud_wr.wr.pkey_index; | |
| } | |
| struct rvt_rq { | |
| struct rvt_rwq *wq; | |
| struct rvt_krwq *kwq; | |
| u32 size; /* size of RWQE array */ | |
| u8 max_sge; | |
| /* protect changes in this struct */ | |
| spinlock_t lock ____cacheline_aligned_in_smp; | |
| }; | |
| /** | |
| * rvt_get_rq_count - count numbers of request work queue entries | |
| * in circular buffer | |
| * @rq: data structure for request queue entry | |
| * @head: head indices of the circular buffer | |
| * @tail: tail indices of the circular buffer | |
| * | |
| * Return - total number of entries in the Receive Queue | |
| */ | |
| static inline u32 rvt_get_rq_count(struct rvt_rq *rq, u32 head, u32 tail) | |
| { | |
| u32 count = head - tail; | |
| if ((s32)count < 0) | |
| count += rq->size; | |
| return count; | |
| } | |
| /* | |
| * This structure holds the information that the send tasklet needs | |
| * to send a RDMA read response or atomic operation. | |
| */ | |
| struct rvt_ack_entry { | |
| struct rvt_sge rdma_sge; | |
| u64 atomic_data; | |
| u32 psn; | |
| u32 lpsn; | |
| u8 opcode; | |
| u8 sent; | |
| void *priv; | |
| }; | |
| #define RC_QP_SCALING_INTERVAL 5 | |
| #define RVT_OPERATION_PRIV 0x00000001 | |
| #define RVT_OPERATION_ATOMIC 0x00000002 | |
| #define RVT_OPERATION_ATOMIC_SGE 0x00000004 | |
| #define RVT_OPERATION_LOCAL 0x00000008 | |
| #define RVT_OPERATION_USE_RESERVE 0x00000010 | |
| #define RVT_OPERATION_IGN_RNR_CNT 0x00000020 | |
| #define RVT_OPERATION_MAX (IB_WR_RESERVED10 + 1) | |
| /** | |
| * struct rvt_operation_params - op table entry | |
| * @length: the length to copy into the swqe entry | |
| * @qpt_support: a bit mask indicating QP type support | |
| * @flags: RVT_OPERATION flags (see above) | |
| * | |
| * This supports table driven post send so that | |
| * the driver can have differing an potentially | |
| * different sets of operations. | |
| * | |
| **/ | |
| struct rvt_operation_params { | |
| size_t length; | |
| u32 qpt_support; | |
| u32 flags; | |
| }; | |
| /* | |
| * Common variables are protected by both r_rq.lock and s_lock in that order | |
| * which only happens in modify_qp() or changing the QP 'state'. | |
| */ | |
| struct rvt_qp { | |
| struct ib_qp ibqp; | |
| void *priv; /* Driver private data */ | |
| /* read mostly fields above and below */ | |
| struct rdma_ah_attr remote_ah_attr; | |
| struct rdma_ah_attr alt_ah_attr; | |
| struct rvt_qp __rcu *next; /* link list for QPN hash table */ | |
| struct rvt_swqe *s_wq; /* send work queue */ | |
| struct rvt_mmap_info *ip; | |
| unsigned long timeout_jiffies; /* computed from timeout */ | |
| int srate_mbps; /* s_srate (below) converted to Mbit/s */ | |
| pid_t pid; /* pid for user mode QPs */ | |
| u32 remote_qpn; | |
| u32 qkey; /* QKEY for this QP (for UD or RD) */ | |
| u32 s_size; /* send work queue size */ | |
| u16 pmtu; /* decoded from path_mtu */ | |
| u8 log_pmtu; /* shift for pmtu */ | |
| u8 state; /* QP state */ | |
| u8 allowed_ops; /* high order bits of allowed opcodes */ | |
| u8 qp_access_flags; | |
| u8 alt_timeout; /* Alternate path timeout for this QP */ | |
| u8 timeout; /* Timeout for this QP */ | |
| u8 s_srate; | |
| u8 s_mig_state; | |
| u8 port_num; | |
| u8 s_pkey_index; /* PKEY index to use */ | |
| u8 s_alt_pkey_index; /* Alternate path PKEY index to use */ | |
| u8 r_max_rd_atomic; /* max number of RDMA read/atomic to receive */ | |
| u8 s_max_rd_atomic; /* max number of RDMA read/atomic to send */ | |
| u8 s_retry_cnt; /* number of times to retry */ | |
| u8 s_rnr_retry_cnt; | |
| u8 r_min_rnr_timer; /* retry timeout value for RNR NAKs */ | |
| u8 s_max_sge; /* size of s_wq->sg_list */ | |
| u8 s_draining; | |
| /* start of read/write fields */ | |
| atomic_t refcount ____cacheline_aligned_in_smp; | |
| wait_queue_head_t wait; | |
| struct rvt_ack_entry *s_ack_queue; | |
| struct rvt_sge_state s_rdma_read_sge; | |
| spinlock_t r_lock ____cacheline_aligned_in_smp; /* used for APM */ | |
| u32 r_psn; /* expected rcv packet sequence number */ | |
| unsigned long r_aflags; | |
| u64 r_wr_id; /* ID for current receive WQE */ | |
| u32 r_ack_psn; /* PSN for next ACK or atomic ACK */ | |
| u32 r_len; /* total length of r_sge */ | |
| u32 r_rcv_len; /* receive data len processed */ | |
| u32 r_msn; /* message sequence number */ | |
| u8 r_state; /* opcode of last packet received */ | |
| u8 r_flags; | |
| u8 r_head_ack_queue; /* index into s_ack_queue[] */ | |
| u8 r_adefered; /* defered ack count */ | |
| struct list_head rspwait; /* link for waiting to respond */ | |
| struct rvt_sge_state r_sge; /* current receive data */ | |
| struct rvt_rq r_rq; /* receive work queue */ | |
| /* post send line */ | |
| spinlock_t s_hlock ____cacheline_aligned_in_smp; | |
| u32 s_head; /* new entries added here */ | |
| u32 s_next_psn; /* PSN for next request */ | |
| u32 s_avail; /* number of entries avail */ | |
| u32 s_ssn; /* SSN of tail entry */ | |
| atomic_t s_reserved_used; /* reserved entries in use */ | |
| spinlock_t s_lock ____cacheline_aligned_in_smp; | |
| u32 s_flags; | |
| struct rvt_sge_state *s_cur_sge; | |
| struct rvt_swqe *s_wqe; | |
| struct rvt_sge_state s_sge; /* current send request data */ | |
| struct rvt_mregion *s_rdma_mr; | |
| u32 s_len; /* total length of s_sge */ | |
| u32 s_rdma_read_len; /* total length of s_rdma_read_sge */ | |
| u32 s_last_psn; /* last response PSN processed */ | |
| u32 s_sending_psn; /* lowest PSN that is being sent */ | |
| u32 s_sending_hpsn; /* highest PSN that is being sent */ | |
| u32 s_psn; /* current packet sequence number */ | |
| u32 s_ack_rdma_psn; /* PSN for sending RDMA read responses */ | |
| u32 s_ack_psn; /* PSN for acking sends and RDMA writes */ | |
| u32 s_tail; /* next entry to process */ | |
| u32 s_cur; /* current work queue entry */ | |
| u32 s_acked; /* last un-ACK'ed entry */ | |
| u32 s_last; /* last completed entry */ | |
| u32 s_lsn; /* limit sequence number (credit) */ | |
| u32 s_ahgpsn; /* set to the psn in the copy of the header */ | |
| u16 s_cur_size; /* size of send packet in bytes */ | |
| u16 s_rdma_ack_cnt; | |
| u8 s_hdrwords; /* size of s_hdr in 32 bit words */ | |
| s8 s_ahgidx; | |
| u8 s_state; /* opcode of last packet sent */ | |
| u8 s_ack_state; /* opcode of packet to ACK */ | |
| u8 s_nak_state; /* non-zero if NAK is pending */ | |
| u8 r_nak_state; /* non-zero if NAK is pending */ | |
| u8 s_retry; /* requester retry counter */ | |
| u8 s_rnr_retry; /* requester RNR retry counter */ | |
| u8 s_num_rd_atomic; /* number of RDMA read/atomic pending */ | |
| u8 s_tail_ack_queue; /* index into s_ack_queue[] */ | |
| u8 s_acked_ack_queue; /* index into s_ack_queue[] */ | |
| struct rvt_sge_state s_ack_rdma_sge; | |
| struct timer_list s_timer; | |
| struct hrtimer s_rnr_timer; | |
| atomic_t local_ops_pending; /* number of fast_reg/local_inv reqs */ | |
| /* | |
| * This sge list MUST be last. Do not add anything below here. | |
| */ | |
| struct rvt_sge *r_sg_list /* verified SGEs */ | |
| ____cacheline_aligned_in_smp; | |
| }; | |
| struct rvt_srq { | |
| struct ib_srq ibsrq; | |
| struct rvt_rq rq; | |
| struct rvt_mmap_info *ip; | |
| /* send signal when number of RWQEs < limit */ | |
| u32 limit; | |
| }; | |
| static inline struct rvt_srq *ibsrq_to_rvtsrq(struct ib_srq *ibsrq) | |
| { | |
| return container_of(ibsrq, struct rvt_srq, ibsrq); | |
| } | |
| static inline struct rvt_qp *ibqp_to_rvtqp(struct ib_qp *ibqp) | |
| { | |
| return container_of(ibqp, struct rvt_qp, ibqp); | |
| } | |
| #define RVT_QPN_MAX BIT(24) | |
| #define RVT_QPNMAP_ENTRIES (RVT_QPN_MAX / PAGE_SIZE / BITS_PER_BYTE) | |
| #define RVT_BITS_PER_PAGE (PAGE_SIZE * BITS_PER_BYTE) | |
| #define RVT_BITS_PER_PAGE_MASK (RVT_BITS_PER_PAGE - 1) | |
| #define RVT_QPN_MASK IB_QPN_MASK | |
| /* | |
| * QPN-map pages start out as NULL, they get allocated upon | |
| * first use and are never deallocated. This way, | |
| * large bitmaps are not allocated unless large numbers of QPs are used. | |
| */ | |
| struct rvt_qpn_map { | |
| void *page; | |
| }; | |
| struct rvt_qpn_table { | |
| spinlock_t lock; /* protect changes to the qp table */ | |
| unsigned flags; /* flags for QP0/1 allocated for each port */ | |
| u32 last; /* last QP number allocated */ | |
| u32 nmaps; /* size of the map table */ | |
| u16 limit; | |
| u8 incr; | |
| /* bit map of free QP numbers other than 0/1 */ | |
| struct rvt_qpn_map map[RVT_QPNMAP_ENTRIES]; | |
| }; | |
| struct rvt_qp_ibdev { | |
| u32 qp_table_size; | |
| u32 qp_table_bits; | |
| struct rvt_qp __rcu **qp_table; | |
| spinlock_t qpt_lock; /* qptable lock */ | |
| struct rvt_qpn_table qpn_table; | |
| }; | |
| /* | |
| * There is one struct rvt_mcast for each multicast GID. | |
| * All attached QPs are then stored as a list of | |
| * struct rvt_mcast_qp. | |
| */ | |
| struct rvt_mcast_qp { | |
| struct list_head list; | |
| struct rvt_qp *qp; | |
| }; | |
| struct rvt_mcast_addr { | |
| union ib_gid mgid; | |
| u16 lid; | |
| }; | |
| struct rvt_mcast { | |
| struct rb_node rb_node; | |
| struct rvt_mcast_addr mcast_addr; | |
| struct list_head qp_list; | |
| wait_queue_head_t wait; | |
| atomic_t refcount; | |
| int n_attached; | |
| }; | |
| /* | |
| * Since struct rvt_swqe is not a fixed size, we can't simply index into | |
| * struct rvt_qp.s_wq. This function does the array index computation. | |
| */ | |
| static inline struct rvt_swqe *rvt_get_swqe_ptr(struct rvt_qp *qp, | |
| unsigned n) | |
| { | |
| return (struct rvt_swqe *)((char *)qp->s_wq + | |
| (sizeof(struct rvt_swqe) + | |
| qp->s_max_sge * | |
| sizeof(struct rvt_sge)) * n); | |
| } | |
| /* | |
| * Since struct rvt_rwqe is not a fixed size, we can't simply index into | |
| * struct rvt_rwq.wq. This function does the array index computation. | |
| */ | |
| static inline struct rvt_rwqe *rvt_get_rwqe_ptr(struct rvt_rq *rq, unsigned n) | |
| { | |
| return (struct rvt_rwqe *) | |
| ((char *)rq->kwq->curr_wq + | |
| (sizeof(struct rvt_rwqe) + | |
| rq->max_sge * sizeof(struct ib_sge)) * n); | |
| } | |
| /** | |
| * rvt_is_user_qp - return if this is user mode QP | |
| * @qp: the target QP | |
| */ | |
| static inline bool rvt_is_user_qp(struct rvt_qp *qp) | |
| { | |
| return !!qp->pid; | |
| } | |
| /** | |
| * rvt_get_qp - get a QP reference | |
| * @qp: the QP to hold | |
| */ | |
| static inline void rvt_get_qp(struct rvt_qp *qp) | |
| { | |
| atomic_inc(&qp->refcount); | |
| } | |
| /** | |
| * rvt_put_qp - release a QP reference | |
| * @qp: the QP to release | |
| */ | |
| static inline void rvt_put_qp(struct rvt_qp *qp) | |
| { | |
| if (qp && atomic_dec_and_test(&qp->refcount)) | |
| wake_up(&qp->wait); | |
| } | |
| /** | |
| * rvt_put_swqe - drop mr refs held by swqe | |
| * @wqe: the send wqe | |
| * | |
| * This drops any mr references held by the swqe | |
| */ | |
| static inline void rvt_put_swqe(struct rvt_swqe *wqe) | |
| { | |
| int i; | |
| for (i = 0; i < wqe->wr.num_sge; i++) { | |
| struct rvt_sge *sge = &wqe->sg_list[i]; | |
| rvt_put_mr(sge->mr); | |
| } | |
| } | |
| /** | |
| * rvt_qp_wqe_reserve - reserve operation | |
| * @qp: the rvt qp | |
| * @wqe: the send wqe | |
| * | |
| * This routine used in post send to record | |
| * a wqe relative reserved operation use. | |
| */ | |
| static inline void rvt_qp_wqe_reserve( | |
| struct rvt_qp *qp, | |
| struct rvt_swqe *wqe) | |
| { | |
| atomic_inc(&qp->s_reserved_used); | |
| } | |
| /** | |
| * rvt_qp_wqe_unreserve - clean reserved operation | |
| * @qp: the rvt qp | |
| * @flags: send wqe flags | |
| * | |
| * This decrements the reserve use count. | |
| * | |
| * This call MUST precede the change to | |
| * s_last to insure that post send sees a stable | |
| * s_avail. | |
| * | |
| * An smp_mp__after_atomic() is used to insure | |
| * the compiler does not juggle the order of the s_last | |
| * ring index and the decrementing of s_reserved_used. | |
| */ | |
| static inline void rvt_qp_wqe_unreserve(struct rvt_qp *qp, int flags) | |
| { | |
| if (unlikely(flags & RVT_SEND_RESERVE_USED)) { | |
| atomic_dec(&qp->s_reserved_used); | |
| /* insure no compiler re-order up to s_last change */ | |
| smp_mb__after_atomic(); | |
| } | |
| } | |
| extern const enum ib_wc_opcode ib_rvt_wc_opcode[]; | |
| /* | |
| * Compare the lower 24 bits of the msn values. | |
| * Returns an integer <, ==, or > than zero. | |
| */ | |
| static inline int rvt_cmp_msn(u32 a, u32 b) | |
| { | |
| return (((int)a) - ((int)b)) << 8; | |
| } | |
| __be32 rvt_compute_aeth(struct rvt_qp *qp); | |
| void rvt_get_credit(struct rvt_qp *qp, u32 aeth); | |
| u32 rvt_restart_sge(struct rvt_sge_state *ss, struct rvt_swqe *wqe, u32 len); | |
| /** | |
| * rvt_div_round_up_mtu - round up divide | |
| * @qp: the qp pair | |
| * @len: the length | |
| * | |
| * Perform a shift based mtu round up divide | |
| */ | |
| static inline u32 rvt_div_round_up_mtu(struct rvt_qp *qp, u32 len) | |
| { | |
| return (len + qp->pmtu - 1) >> qp->log_pmtu; | |
| } | |
| /** | |
| * rvt_div_mtu - shift-based divide | |
| * @qp: the qp pair | |
| * @len: the length | |
| * | |
| * Perform a shift based mtu divide | |
| */ | |
| static inline u32 rvt_div_mtu(struct rvt_qp *qp, u32 len) | |
| { | |
| return len >> qp->log_pmtu; | |
| } | |
| /** | |
| * rvt_timeout_to_jiffies - Convert a ULP timeout input into jiffies | |
| * @timeout: timeout input(0 - 31). | |
| * | |
| * Return a timeout value in jiffies. | |
| */ | |
| static inline unsigned long rvt_timeout_to_jiffies(u8 timeout) | |
| { | |
| if (timeout > 31) | |
| timeout = 31; | |
| return usecs_to_jiffies(1U << timeout) * 4096UL / 1000UL; | |
| } | |
| /** | |
| * rvt_lookup_qpn - return the QP with the given QPN | |
| * @rdi: rvt device info structure | |
| * @rvp: the ibport | |
| * @qpn: the QP number to look up | |
| * | |
| * The caller must hold the rcu_read_lock(), and keep the lock until | |
| * the returned qp is no longer in use. | |
| */ | |
| static inline struct rvt_qp *rvt_lookup_qpn(struct rvt_dev_info *rdi, | |
| struct rvt_ibport *rvp, | |
| u32 qpn) __must_hold(RCU) | |
| { | |
| struct rvt_qp *qp = NULL; | |
| if (unlikely(qpn <= 1)) { | |
| qp = rcu_dereference(rvp->qp[qpn]); | |
| } else { | |
| u32 n = hash_32(qpn, rdi->qp_dev->qp_table_bits); | |
| for (qp = rcu_dereference(rdi->qp_dev->qp_table[n]); qp; | |
| qp = rcu_dereference(qp->next)) | |
| if (qp->ibqp.qp_num == qpn) | |
| break; | |
| } | |
| return qp; | |
| } | |
| /** | |
| * rvt_mod_retry_timer_ext - mod a retry timer | |
| * @qp: the QP | |
| * @shift: timeout shift to wait for multiple packets | |
| * Modify a potentially already running retry timer | |
| */ | |
| static inline void rvt_mod_retry_timer_ext(struct rvt_qp *qp, u8 shift) | |
| { | |
| struct ib_qp *ibqp = &qp->ibqp; | |
| struct rvt_dev_info *rdi = ib_to_rvt(ibqp->device); | |
| lockdep_assert_held(&qp->s_lock); | |
| qp->s_flags |= RVT_S_TIMER; | |
| /* 4.096 usec. * (1 << qp->timeout) */ | |
| mod_timer(&qp->s_timer, jiffies + rdi->busy_jiffies + | |
| (qp->timeout_jiffies << shift)); | |
| } | |
| static inline void rvt_mod_retry_timer(struct rvt_qp *qp) | |
| { | |
| return rvt_mod_retry_timer_ext(qp, 0); | |
| } | |
| /** | |
| * rvt_put_qp_swqe - drop refs held by swqe | |
| * @qp: the send qp | |
| * @wqe: the send wqe | |
| * | |
| * This drops any references held by the swqe | |
| */ | |
| static inline void rvt_put_qp_swqe(struct rvt_qp *qp, struct rvt_swqe *wqe) | |
| { | |
| rvt_put_swqe(wqe); | |
| if (qp->allowed_ops == IB_OPCODE_UD) | |
| rdma_destroy_ah_attr(wqe->ud_wr.attr); | |
| } | |
| /** | |
| * rvt_qp_swqe_incr - increment ring index | |
| * @qp: the qp | |
| * @val: the starting value | |
| * | |
| * Return: the new value wrapping as appropriate | |
| */ | |
| static inline u32 | |
| rvt_qp_swqe_incr(struct rvt_qp *qp, u32 val) | |
| { | |
| if (++val >= qp->s_size) | |
| val = 0; | |
| return val; | |
| } | |
| int rvt_error_qp(struct rvt_qp *qp, enum ib_wc_status err); | |
| /** | |
| * rvt_recv_cq - add a new entry to completion queue | |
| * by receive queue | |
| * @qp: receive queue | |
| * @wc: work completion entry to add | |
| * @solicited: true if @entry is solicited | |
| * | |
| * This is wrapper function for rvt_enter_cq function call by | |
| * receive queue. If rvt_cq_enter return false, it means cq is | |
| * full and the qp is put into error state. | |
| */ | |
| static inline void rvt_recv_cq(struct rvt_qp *qp, struct ib_wc *wc, | |
| bool solicited) | |
| { | |
| struct rvt_cq *cq = ibcq_to_rvtcq(qp->ibqp.recv_cq); | |
| if (unlikely(!rvt_cq_enter(cq, wc, solicited))) | |
| rvt_error_qp(qp, IB_WC_LOC_QP_OP_ERR); | |
| } | |
| /** | |
| * rvt_send_cq - add a new entry to completion queue | |
| * by send queue | |
| * @qp: send queue | |
| * @wc: work completion entry to add | |
| * @solicited: true if @entry is solicited | |
| * | |
| * This is wrapper function for rvt_enter_cq function call by | |
| * send queue. If rvt_cq_enter return false, it means cq is | |
| * full and the qp is put into error state. | |
| */ | |
| static inline void rvt_send_cq(struct rvt_qp *qp, struct ib_wc *wc, | |
| bool solicited) | |
| { | |
| struct rvt_cq *cq = ibcq_to_rvtcq(qp->ibqp.send_cq); | |
| if (unlikely(!rvt_cq_enter(cq, wc, solicited))) | |
| rvt_error_qp(qp, IB_WC_LOC_QP_OP_ERR); | |
| } | |
| /** | |
| * rvt_qp_complete_swqe - insert send completion | |
| * @qp: the qp | |
| * @wqe: the send wqe | |
| * @opcode: wc operation (driver dependent) | |
| * @status: completion status | |
| * | |
| * Update the s_last information, and then insert a send | |
| * completion into the completion | |
| * queue if the qp indicates it should be done. | |
| * | |
| * See IBTA 10.7.3.1 for info on completion | |
| * control. | |
| * | |
| * Return: new last | |
| */ | |
| static inline u32 | |
| rvt_qp_complete_swqe(struct rvt_qp *qp, | |
| struct rvt_swqe *wqe, | |
| enum ib_wc_opcode opcode, | |
| enum ib_wc_status status) | |
| { | |
| bool need_completion; | |
| u64 wr_id; | |
| u32 byte_len, last; | |
| int flags = wqe->wr.send_flags; | |
| rvt_qp_wqe_unreserve(qp, flags); | |
| rvt_put_qp_swqe(qp, wqe); | |
| need_completion = | |
| !(flags & RVT_SEND_RESERVE_USED) && | |
| (!(qp->s_flags & RVT_S_SIGNAL_REQ_WR) || | |
| (flags & IB_SEND_SIGNALED) || | |
| status != IB_WC_SUCCESS); | |
| if (need_completion) { | |
| wr_id = wqe->wr.wr_id; | |
| byte_len = wqe->length; | |
| /* above fields required before writing s_last */ | |
| } | |
| last = rvt_qp_swqe_incr(qp, qp->s_last); | |
| /* see rvt_qp_is_avail() */ | |
| smp_store_release(&qp->s_last, last); | |
| if (need_completion) { | |
| struct ib_wc w = { | |
| .wr_id = wr_id, | |
| .status = status, | |
| .opcode = opcode, | |
| .qp = &qp->ibqp, | |
| .byte_len = byte_len, | |
| }; | |
| rvt_send_cq(qp, &w, status != IB_WC_SUCCESS); | |
| } | |
| return last; | |
| } | |
| extern const int ib_rvt_state_ops[]; | |
| struct rvt_dev_info; | |
| int rvt_get_rwqe(struct rvt_qp *qp, bool wr_id_only); | |
| void rvt_comm_est(struct rvt_qp *qp); | |
| void rvt_rc_error(struct rvt_qp *qp, enum ib_wc_status err); | |
| unsigned long rvt_rnr_tbl_to_usec(u32 index); | |
| enum hrtimer_restart rvt_rc_rnr_retry(struct hrtimer *t); | |
| void rvt_add_rnr_timer(struct rvt_qp *qp, u32 aeth); | |
| void rvt_del_timers_sync(struct rvt_qp *qp); | |
| void rvt_stop_rc_timers(struct rvt_qp *qp); | |
| void rvt_add_retry_timer_ext(struct rvt_qp *qp, u8 shift); | |
| static inline void rvt_add_retry_timer(struct rvt_qp *qp) | |
| { | |
| rvt_add_retry_timer_ext(qp, 0); | |
| } | |
| void rvt_copy_sge(struct rvt_qp *qp, struct rvt_sge_state *ss, | |
| void *data, u32 length, | |
| bool release, bool copy_last); | |
| void rvt_send_complete(struct rvt_qp *qp, struct rvt_swqe *wqe, | |
| enum ib_wc_status status); | |
| void rvt_ruc_loopback(struct rvt_qp *qp); | |
| /** | |
| * struct rvt_qp_iter - the iterator for QPs | |
| * @qp: the current QP | |
| * | |
| * This structure defines the current iterator | |
| * state for sequenced access to all QPs relative | |
| * to an rvt_dev_info. | |
| */ | |
| struct rvt_qp_iter { | |
| struct rvt_qp *qp; | |
| /* private: backpointer */ | |
| struct rvt_dev_info *rdi; | |
| /* private: callback routine */ | |
| void (*cb)(struct rvt_qp *qp, u64 v); | |
| /* private: for arg to callback routine */ | |
| u64 v; | |
| /* private: number of SMI,GSI QPs for device */ | |
| int specials; | |
| /* private: current iterator index */ | |
| int n; | |
| }; | |
| /** | |
| * ib_cq_tail - Return tail index of cq buffer | |
| * @send_cq: The cq for send | |
| * | |
| * This is called in qp_iter_print to get tail | |
| * of cq buffer. | |
| */ | |
| static inline u32 ib_cq_tail(struct ib_cq *send_cq) | |
| { | |
| struct rvt_cq *cq = ibcq_to_rvtcq(send_cq); | |
| return ibcq_to_rvtcq(send_cq)->ip ? | |
| RDMA_READ_UAPI_ATOMIC(cq->queue->tail) : | |
| ibcq_to_rvtcq(send_cq)->kqueue->tail; | |
| } | |
| /** | |
| * ib_cq_head - Return head index of cq buffer | |
| * @send_cq: The cq for send | |
| * | |
| * This is called in qp_iter_print to get head | |
| * of cq buffer. | |
| */ | |
| static inline u32 ib_cq_head(struct ib_cq *send_cq) | |
| { | |
| struct rvt_cq *cq = ibcq_to_rvtcq(send_cq); | |
| return ibcq_to_rvtcq(send_cq)->ip ? | |
| RDMA_READ_UAPI_ATOMIC(cq->queue->head) : | |
| ibcq_to_rvtcq(send_cq)->kqueue->head; | |
| } | |
| /** | |
| * rvt_free_rq - free memory allocated for rvt_rq struct | |
| * @rq: request queue data structure | |
| * | |
| * This function should only be called if the rvt_mmap_info() | |
| * has not succeeded. | |
| */ | |
| static inline void rvt_free_rq(struct rvt_rq *rq) | |
| { | |
| kvfree(rq->kwq); | |
| rq->kwq = NULL; | |
| vfree(rq->wq); | |
| rq->wq = NULL; | |
| } | |
| /** | |
| * rvt_to_iport - Get the ibport pointer | |
| * @qp: the qp pointer | |
| * | |
| * This function returns the ibport pointer from the qp pointer. | |
| */ | |
| static inline struct rvt_ibport *rvt_to_iport(struct rvt_qp *qp) | |
| { | |
| struct rvt_dev_info *rdi = ib_to_rvt(qp->ibqp.device); | |
| return rdi->ports[qp->port_num - 1]; | |
| } | |
| /** | |
| * rvt_rc_credit_avail - Check if there are enough RC credits for the request | |
| * @qp: the qp | |
| * @wqe: the request | |
| * | |
| * This function returns false when there are not enough credits for the given | |
| * request and true otherwise. | |
| */ | |
| static inline bool rvt_rc_credit_avail(struct rvt_qp *qp, struct rvt_swqe *wqe) | |
| { | |
| lockdep_assert_held(&qp->s_lock); | |
| if (!(qp->s_flags & RVT_S_UNLIMITED_CREDIT) && | |
| rvt_cmp_msn(wqe->ssn, qp->s_lsn + 1) > 0) { | |
| struct rvt_ibport *rvp = rvt_to_iport(qp); | |
| qp->s_flags |= RVT_S_WAIT_SSN_CREDIT; | |
| rvp->n_rc_crwaits++; | |
| return false; | |
| } | |
| return true; | |
| } | |
| struct rvt_qp_iter *rvt_qp_iter_init(struct rvt_dev_info *rdi, | |
| u64 v, | |
| void (*cb)(struct rvt_qp *qp, u64 v)); | |
| int rvt_qp_iter_next(struct rvt_qp_iter *iter); | |
| void rvt_qp_iter(struct rvt_dev_info *rdi, | |
| u64 v, | |
| void (*cb)(struct rvt_qp *qp, u64 v)); | |
| void rvt_qp_mr_clean(struct rvt_qp *qp, u32 lkey); | |
| #endif /* DEF_RDMAVT_INCQP_H */ |