| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Simple file system for zoned block devices exposing zones as files. | |
| * | |
| * Copyright (C) 2022 Western Digital Corporation or its affiliates. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/iomap.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/statfs.h> | |
| #include <linux/writeback.h> | |
| #include <linux/quotaops.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/parser.h> | |
| #include <linux/uio.h> | |
| #include <linux/mman.h> | |
| #include <linux/sched/mm.h> | |
| #include <linux/task_io_accounting_ops.h> | |
| #include "zonefs.h" | |
| #include "trace.h" | |
| static int zonefs_read_iomap_begin(struct inode *inode, loff_t offset, | |
| loff_t length, unsigned int flags, | |
| struct iomap *iomap, struct iomap *srcmap) | |
| { | |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); | |
| struct zonefs_zone *z = zonefs_inode_zone(inode); | |
| struct super_block *sb = inode->i_sb; | |
| loff_t isize; | |
| /* | |
| * All blocks are always mapped below EOF. If reading past EOF, | |
| * act as if there is a hole up to the file maximum size. | |
| */ | |
| mutex_lock(&zi->i_truncate_mutex); | |
| iomap->bdev = inode->i_sb->s_bdev; | |
| iomap->offset = ALIGN_DOWN(offset, sb->s_blocksize); | |
| isize = i_size_read(inode); | |
| if (iomap->offset >= isize) { | |
| iomap->type = IOMAP_HOLE; | |
| iomap->addr = IOMAP_NULL_ADDR; | |
| iomap->length = length; | |
| } else { | |
| iomap->type = IOMAP_MAPPED; | |
| iomap->addr = (z->z_sector << SECTOR_SHIFT) + iomap->offset; | |
| iomap->length = isize - iomap->offset; | |
| } | |
| mutex_unlock(&zi->i_truncate_mutex); | |
| trace_zonefs_iomap_begin(inode, iomap); | |
| return 0; | |
| } | |
| static DEFINE_IOMAP_ITER_NEXT(zonefs_read_iomap_next, zonefs_read_iomap_begin); | |
| static const struct iomap_ops zonefs_read_iomap_ops = { | |
| .iomap_next = zonefs_read_iomap_next, | |
| }; | |
| static int zonefs_write_iomap_begin(struct inode *inode, loff_t offset, | |
| loff_t length, unsigned int flags, | |
| struct iomap *iomap, struct iomap *srcmap) | |
| { | |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); | |
| struct zonefs_zone *z = zonefs_inode_zone(inode); | |
| struct super_block *sb = inode->i_sb; | |
| loff_t isize; | |
| /* All write I/Os should always be within the file maximum size */ | |
| if (WARN_ON_ONCE(offset + length > z->z_capacity)) | |
| return -EIO; | |
| /* | |
| * Sequential zones can only accept direct writes. This is already | |
| * checked when writes are issued, so warn if we see a page writeback | |
| * operation. | |
| */ | |
| if (WARN_ON_ONCE(zonefs_zone_is_seq(z) && !(flags & IOMAP_DIRECT))) | |
| return -EIO; | |
| /* | |
| * For conventional zones, all blocks are always mapped. For sequential | |
| * zones, all blocks after always mapped below the inode size (zone | |
| * write pointer) and unwritten beyond. | |
| */ | |
| mutex_lock(&zi->i_truncate_mutex); | |
| iomap->bdev = inode->i_sb->s_bdev; | |
| iomap->offset = ALIGN_DOWN(offset, sb->s_blocksize); | |
| iomap->addr = (z->z_sector << SECTOR_SHIFT) + iomap->offset; | |
| isize = i_size_read(inode); | |
| if (iomap->offset >= isize) { | |
| iomap->type = IOMAP_UNWRITTEN; | |
| iomap->length = z->z_capacity - iomap->offset; | |
| } else { | |
| iomap->type = IOMAP_MAPPED; | |
| iomap->length = isize - iomap->offset; | |
| } | |
| mutex_unlock(&zi->i_truncate_mutex); | |
| trace_zonefs_iomap_begin(inode, iomap); | |
| return 0; | |
| } | |
| static DEFINE_IOMAP_ITER_NEXT(zonefs_write_iomap_next, | |
| zonefs_write_iomap_begin); | |
| static const struct iomap_ops zonefs_write_iomap_ops = { | |
| .iomap_next = zonefs_write_iomap_next, | |
| }; | |
| static int zonefs_read_folio(struct file *unused, struct folio *folio) | |
| { | |
| iomap_bio_read_folio(folio, &zonefs_read_iomap_ops); | |
| return 0; | |
| } | |
| static void zonefs_readahead(struct readahead_control *rac) | |
| { | |
| iomap_bio_readahead(rac, &zonefs_read_iomap_ops); | |
| } | |
| /* | |
| * Map blocks for page writeback. This is used only on conventional zone files, | |
| * which implies that the page range can only be within the fixed inode size. | |
| */ | |
| static ssize_t zonefs_writeback_range(struct iomap_writepage_ctx *wpc, | |
| struct folio *folio, u64 offset, unsigned len, u64 end_pos) | |
| { | |
| struct zonefs_zone *z = zonefs_inode_zone(wpc->inode); | |
| if (WARN_ON_ONCE(zonefs_zone_is_seq(z))) | |
| return -EIO; | |
| if (WARN_ON_ONCE(offset >= i_size_read(wpc->inode))) | |
| return -EIO; | |
| /* If the mapping is already OK, nothing needs to be done */ | |
| if (offset < wpc->iomap.offset || | |
| offset >= wpc->iomap.offset + wpc->iomap.length) { | |
| int error; | |
| error = zonefs_write_iomap_begin(wpc->inode, offset, | |
| z->z_capacity - offset, IOMAP_WRITE, | |
| &wpc->iomap, NULL); | |
| if (error) | |
| return error; | |
| } | |
| return iomap_add_to_ioend(wpc, folio, offset, end_pos, len); | |
| } | |
| static const struct iomap_writeback_ops zonefs_writeback_ops = { | |
| .writeback_range = zonefs_writeback_range, | |
| .writeback_submit = iomap_ioend_writeback_submit, | |
| }; | |
| static int zonefs_writepages(struct address_space *mapping, | |
| struct writeback_control *wbc) | |
| { | |
| struct iomap_writepage_ctx wpc = { | |
| .inode = mapping->host, | |
| .wbc = wbc, | |
| .ops = &zonefs_writeback_ops, | |
| }; | |
| return iomap_writepages(&wpc); | |
| } | |
| static int zonefs_swap_activate(struct swap_info_struct *sis, | |
| struct file *swap_file, sector_t *span) | |
| { | |
| struct inode *inode = file_inode(swap_file); | |
| if (zonefs_inode_is_seq(inode)) { | |
| zonefs_err(inode->i_sb, | |
| "swap file: not a conventional zone file\n"); | |
| return -EINVAL; | |
| } | |
| return iomap_swapfile_activate(sis, swap_file, span, | |
| &zonefs_read_iomap_ops); | |
| } | |
| const struct address_space_operations zonefs_file_aops = { | |
| .read_folio = zonefs_read_folio, | |
| .readahead = zonefs_readahead, | |
| .writepages = zonefs_writepages, | |
| .dirty_folio = iomap_dirty_folio, | |
| .release_folio = iomap_release_folio, | |
| .invalidate_folio = iomap_invalidate_folio, | |
| .migrate_folio = filemap_migrate_folio, | |
| .is_partially_uptodate = iomap_is_partially_uptodate, | |
| .error_remove_folio = generic_error_remove_folio, | |
| .swap_activate = zonefs_swap_activate, | |
| }; | |
| int zonefs_file_truncate(struct inode *inode, loff_t isize) | |
| { | |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); | |
| struct zonefs_zone *z = zonefs_inode_zone(inode); | |
| loff_t old_isize; | |
| enum req_op op; | |
| int ret = 0; | |
| /* | |
| * Only sequential zone files can be truncated and truncation is allowed | |
| * only down to a 0 size, which is equivalent to a zone reset, and to | |
| * the maximum file size, which is equivalent to a zone finish. | |
| */ | |
| if (!zonefs_zone_is_seq(z)) | |
| return -EPERM; | |
| if (!isize) | |
| op = REQ_OP_ZONE_RESET; | |
| else if (isize == z->z_capacity) | |
| op = REQ_OP_ZONE_FINISH; | |
| else | |
| return -EPERM; | |
| inode_dio_wait(inode); | |
| /* Serialize against page faults */ | |
| filemap_invalidate_lock(inode->i_mapping); | |
| /* Serialize against zonefs_iomap_begin() */ | |
| mutex_lock(&zi->i_truncate_mutex); | |
| old_isize = i_size_read(inode); | |
| if (isize == old_isize) | |
| goto unlock; | |
| ret = zonefs_inode_zone_mgmt(inode, op); | |
| if (ret) | |
| goto unlock; | |
| /* | |
| * If the mount option ZONEFS_MNTOPT_EXPLICIT_OPEN is set, | |
| * take care of open zones. | |
| */ | |
| if (z->z_flags & ZONEFS_ZONE_OPEN) { | |
| /* | |
| * Truncating a zone to EMPTY or FULL is the equivalent of | |
| * closing the zone. For a truncation to 0, we need to | |
| * re-open the zone to ensure new writes can be processed. | |
| * For a truncation to the maximum file size, the zone is | |
| * closed and writes cannot be accepted anymore, so clear | |
| * the open flag. | |
| */ | |
| if (!isize) | |
| ret = zonefs_inode_zone_mgmt(inode, REQ_OP_ZONE_OPEN); | |
| else | |
| z->z_flags &= ~ZONEFS_ZONE_OPEN; | |
| } | |
| zonefs_update_stats(inode, isize); | |
| truncate_setsize(inode, isize); | |
| z->z_wpoffset = isize; | |
| zonefs_inode_account_active(inode); | |
| unlock: | |
| mutex_unlock(&zi->i_truncate_mutex); | |
| filemap_invalidate_unlock(inode->i_mapping); | |
| return ret; | |
| } | |
| static int zonefs_file_fsync(struct file *file, loff_t start, loff_t end, | |
| int datasync) | |
| { | |
| struct inode *inode = file_inode(file); | |
| int ret = 0; | |
| if (unlikely(IS_IMMUTABLE(inode))) | |
| return -EPERM; | |
| /* | |
| * Since only direct writes are allowed in sequential files, page cache | |
| * flush is needed only for conventional zone files. | |
| */ | |
| if (zonefs_inode_is_cnv(inode)) | |
| ret = file_write_and_wait_range(file, start, end); | |
| if (!ret) | |
| ret = blkdev_issue_flush(inode->i_sb->s_bdev); | |
| if (ret) | |
| zonefs_io_error(inode, true); | |
| return ret; | |
| } | |
| static vm_fault_t zonefs_filemap_page_mkwrite(struct vm_fault *vmf) | |
| { | |
| struct inode *inode = file_inode(vmf->vma->vm_file); | |
| vm_fault_t ret; | |
| if (unlikely(IS_IMMUTABLE(inode))) | |
| return VM_FAULT_SIGBUS; | |
| /* | |
| * Sanity check: only conventional zone files can have shared | |
| * writeable mappings. | |
| */ | |
| if (zonefs_inode_is_seq(inode)) | |
| return VM_FAULT_NOPAGE; | |
| sb_start_pagefault(inode->i_sb); | |
| file_update_time(vmf->vma->vm_file); | |
| /* Serialize against truncates */ | |
| filemap_invalidate_lock_shared(inode->i_mapping); | |
| ret = iomap_page_mkwrite(vmf, &zonefs_write_iomap_ops, NULL); | |
| filemap_invalidate_unlock_shared(inode->i_mapping); | |
| sb_end_pagefault(inode->i_sb); | |
| return ret; | |
| } | |
| static const struct vm_operations_struct zonefs_file_vm_ops = { | |
| .fault = filemap_fault, | |
| .map_pages = filemap_map_pages, | |
| .page_mkwrite = zonefs_filemap_page_mkwrite, | |
| }; | |
| static int zonefs_file_mmap_prepare(struct vm_area_desc *desc) | |
| { | |
| struct file *file = desc->file; | |
| /* | |
| * Conventional zones accept random writes, so their files can support | |
| * shared writable mappings. For sequential zone files, only read | |
| * mappings are possible since there are no guarantees for write | |
| * ordering between msync() and page cache writeback. | |
| */ | |
| if (zonefs_inode_is_seq(file_inode(file)) && | |
| vma_desc_test_all(desc, VMA_SHARED_BIT, VMA_MAYWRITE_BIT)) | |
| return -EINVAL; | |
| file_accessed(file); | |
| desc->vm_ops = &zonefs_file_vm_ops; | |
| return 0; | |
| } | |
| static loff_t zonefs_file_llseek(struct file *file, loff_t offset, int whence) | |
| { | |
| loff_t isize = i_size_read(file_inode(file)); | |
| /* | |
| * Seeks are limited to below the zone size for conventional zones | |
| * and below the zone write pointer for sequential zones. In both | |
| * cases, this limit is the inode size. | |
| */ | |
| return generic_file_llseek_size(file, offset, whence, isize, isize); | |
| } | |
| static int zonefs_file_write_dio_end_io(struct kiocb *iocb, ssize_t size, | |
| int error, unsigned int flags) | |
| { | |
| struct inode *inode = file_inode(iocb->ki_filp); | |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); | |
| if (error) { | |
| /* | |
| * For Sync IOs, error recovery is called from | |
| * zonefs_file_dio_write(). | |
| */ | |
| if (!is_sync_kiocb(iocb)) | |
| zonefs_io_error(inode, true); | |
| return error; | |
| } | |
| if (size && zonefs_inode_is_seq(inode)) { | |
| /* | |
| * Note that we may be seeing completions out of order, | |
| * but that is not a problem since a write completed | |
| * successfully necessarily means that all preceding writes | |
| * were also successful. So we can safely increase the inode | |
| * size to the write end location. | |
| */ | |
| mutex_lock(&zi->i_truncate_mutex); | |
| if (i_size_read(inode) < iocb->ki_pos + size) { | |
| zonefs_update_stats(inode, iocb->ki_pos + size); | |
| zonefs_i_size_write(inode, iocb->ki_pos + size); | |
| } | |
| mutex_unlock(&zi->i_truncate_mutex); | |
| } | |
| return 0; | |
| } | |
| static const struct iomap_dio_ops zonefs_write_dio_ops = { | |
| .end_io = zonefs_file_write_dio_end_io, | |
| }; | |
| /* | |
| * Do not exceed the LFS limits nor the file zone size. If pos is under the | |
| * limit it becomes a short access. If it exceeds the limit, return -EFBIG. | |
| */ | |
| static loff_t zonefs_write_check_limits(struct file *file, loff_t pos, | |
| loff_t count) | |
| { | |
| struct inode *inode = file_inode(file); | |
| struct zonefs_zone *z = zonefs_inode_zone(inode); | |
| loff_t limit = rlimit(RLIMIT_FSIZE); | |
| loff_t max_size = z->z_capacity; | |
| if (limit != RLIM_INFINITY) { | |
| if (pos >= limit) { | |
| send_sig(SIGXFSZ, current, 0); | |
| return -EFBIG; | |
| } | |
| count = min(count, limit - pos); | |
| } | |
| if (!(file->f_flags & O_LARGEFILE)) | |
| max_size = min_t(loff_t, MAX_NON_LFS, max_size); | |
| if (unlikely(pos >= max_size)) | |
| return -EFBIG; | |
| return min(count, max_size - pos); | |
| } | |
| static ssize_t zonefs_write_checks(struct kiocb *iocb, struct iov_iter *from) | |
| { | |
| struct file *file = iocb->ki_filp; | |
| struct inode *inode = file_inode(file); | |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); | |
| struct zonefs_zone *z = zonefs_inode_zone(inode); | |
| loff_t count; | |
| if (IS_SWAPFILE(inode)) | |
| return -ETXTBSY; | |
| if (!iov_iter_count(from)) | |
| return 0; | |
| if ((iocb->ki_flags & IOCB_NOWAIT) && !(iocb->ki_flags & IOCB_DIRECT)) | |
| return -EINVAL; | |
| if (iocb->ki_flags & IOCB_APPEND) { | |
| if (zonefs_zone_is_cnv(z)) | |
| return -EINVAL; | |
| mutex_lock(&zi->i_truncate_mutex); | |
| iocb->ki_pos = z->z_wpoffset; | |
| mutex_unlock(&zi->i_truncate_mutex); | |
| } | |
| count = zonefs_write_check_limits(file, iocb->ki_pos, | |
| iov_iter_count(from)); | |
| if (count < 0) | |
| return count; | |
| iov_iter_truncate(from, count); | |
| return iov_iter_count(from); | |
| } | |
| /* | |
| * Handle direct writes. For sequential zone files, this is the only possible | |
| * write path. For these files, check that the user is issuing writes | |
| * sequentially from the end of the file. This code assumes that the block layer | |
| * delivers write requests to the device in sequential order. This is always the | |
| * case if a block IO scheduler implementing the ELEVATOR_F_ZBD_SEQ_WRITE | |
| * elevator feature is being used (e.g. mq-deadline). The block layer always | |
| * automatically select such an elevator for zoned block devices during the | |
| * device initialization. | |
| */ | |
| static ssize_t zonefs_file_dio_write(struct kiocb *iocb, struct iov_iter *from) | |
| { | |
| struct inode *inode = file_inode(iocb->ki_filp); | |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); | |
| struct zonefs_zone *z = zonefs_inode_zone(inode); | |
| struct super_block *sb = inode->i_sb; | |
| ssize_t ret, count; | |
| /* | |
| * For async direct IOs to sequential zone files, refuse IOCB_NOWAIT | |
| * as this can cause write reordering (e.g. the first aio gets EAGAIN | |
| * on the inode lock but the second goes through but is now unaligned). | |
| */ | |
| if (zonefs_zone_is_seq(z) && !is_sync_kiocb(iocb) && | |
| (iocb->ki_flags & IOCB_NOWAIT)) | |
| return -EOPNOTSUPP; | |
| if (iocb->ki_flags & IOCB_NOWAIT) { | |
| if (!inode_trylock(inode)) | |
| return -EAGAIN; | |
| } else { | |
| inode_lock(inode); | |
| } | |
| count = zonefs_write_checks(iocb, from); | |
| if (count <= 0) { | |
| ret = count; | |
| goto inode_unlock; | |
| } | |
| if ((iocb->ki_pos | count) & (sb->s_blocksize - 1)) { | |
| ret = -EINVAL; | |
| goto inode_unlock; | |
| } | |
| /* Enforce sequential writes (append only) in sequential zones */ | |
| if (zonefs_zone_is_seq(z)) { | |
| mutex_lock(&zi->i_truncate_mutex); | |
| if (iocb->ki_pos != z->z_wpoffset) { | |
| mutex_unlock(&zi->i_truncate_mutex); | |
| ret = -EINVAL; | |
| goto inode_unlock; | |
| } | |
| /* | |
| * Advance the zone write pointer offset. This assumes that the | |
| * IO will succeed, which is OK to do because we do not allow | |
| * partial writes (IOMAP_DIO_PARTIAL is not set) and if the IO | |
| * fails, the error path will correct the write pointer offset. | |
| */ | |
| z->z_wpoffset += count; | |
| zonefs_inode_account_active(inode); | |
| mutex_unlock(&zi->i_truncate_mutex); | |
| } | |
| /* | |
| * iomap_dio_rw() may return ENOTBLK if there was an issue with | |
| * page invalidation. Overwrite that error code with EBUSY so that | |
| * the user can make sense of the error. | |
| */ | |
| ret = iomap_dio_rw(iocb, from, &zonefs_write_iomap_ops, | |
| &zonefs_write_dio_ops, 0, NULL, 0); | |
| if (ret == -ENOTBLK) | |
| ret = -EBUSY; | |
| /* | |
| * For a failed IO or partial completion, trigger error recovery | |
| * to update the zone write pointer offset to a correct value. | |
| * For asynchronous IOs, zonefs_file_write_dio_end_io() may already | |
| * have executed error recovery if the IO already completed when we | |
| * reach here. However, we cannot know that and execute error recovery | |
| * again (that will not change anything). | |
| */ | |
| if (zonefs_zone_is_seq(z)) { | |
| if (ret > 0 && ret != count) | |
| ret = -EIO; | |
| if (ret < 0 && ret != -EIOCBQUEUED) | |
| zonefs_io_error(inode, true); | |
| } | |
| inode_unlock: | |
| inode_unlock(inode); | |
| return ret; | |
| } | |
| static ssize_t zonefs_file_buffered_write(struct kiocb *iocb, | |
| struct iov_iter *from) | |
| { | |
| struct inode *inode = file_inode(iocb->ki_filp); | |
| ssize_t ret; | |
| /* | |
| * Direct IO writes are mandatory for sequential zone files so that the | |
| * write IO issuing order is preserved. | |
| */ | |
| if (zonefs_inode_is_seq(inode)) | |
| return -EIO; | |
| if (iocb->ki_flags & IOCB_NOWAIT) { | |
| if (!inode_trylock(inode)) | |
| return -EAGAIN; | |
| } else { | |
| inode_lock(inode); | |
| } | |
| ret = zonefs_write_checks(iocb, from); | |
| if (ret <= 0) | |
| goto inode_unlock; | |
| ret = iomap_file_buffered_write(iocb, from, &zonefs_write_iomap_ops, | |
| NULL, NULL); | |
| if (ret == -EIO) | |
| zonefs_io_error(inode, true); | |
| inode_unlock: | |
| inode_unlock(inode); | |
| if (ret > 0) | |
| ret = generic_write_sync(iocb, ret); | |
| return ret; | |
| } | |
| static ssize_t zonefs_file_write_iter(struct kiocb *iocb, struct iov_iter *from) | |
| { | |
| struct inode *inode = file_inode(iocb->ki_filp); | |
| struct zonefs_zone *z = zonefs_inode_zone(inode); | |
| if (unlikely(IS_IMMUTABLE(inode))) | |
| return -EPERM; | |
| if (sb_rdonly(inode->i_sb)) | |
| return -EROFS; | |
| /* Write operations beyond the zone capacity are not allowed */ | |
| if (iocb->ki_pos >= z->z_capacity) | |
| return -EFBIG; | |
| if (iocb->ki_flags & IOCB_DIRECT) { | |
| ssize_t ret = zonefs_file_dio_write(iocb, from); | |
| if (ret != -ENOTBLK) | |
| return ret; | |
| } | |
| return zonefs_file_buffered_write(iocb, from); | |
| } | |
| static int zonefs_file_read_dio_end_io(struct kiocb *iocb, ssize_t size, | |
| int error, unsigned int flags) | |
| { | |
| if (error) { | |
| zonefs_io_error(file_inode(iocb->ki_filp), false); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| static const struct iomap_dio_ops zonefs_read_dio_ops = { | |
| .end_io = zonefs_file_read_dio_end_io, | |
| }; | |
| static ssize_t zonefs_file_read_iter(struct kiocb *iocb, struct iov_iter *to) | |
| { | |
| struct inode *inode = file_inode(iocb->ki_filp); | |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); | |
| struct zonefs_zone *z = zonefs_inode_zone(inode); | |
| struct super_block *sb = inode->i_sb; | |
| loff_t isize; | |
| ssize_t ret; | |
| /* Offline zones cannot be read */ | |
| if (unlikely(IS_IMMUTABLE(inode) && !(inode->i_mode & 0777))) | |
| return -EPERM; | |
| if (iocb->ki_pos >= z->z_capacity) | |
| return 0; | |
| if (iocb->ki_flags & IOCB_NOWAIT) { | |
| if (!inode_trylock_shared(inode)) | |
| return -EAGAIN; | |
| } else { | |
| inode_lock_shared(inode); | |
| } | |
| /* Limit read operations to written data */ | |
| mutex_lock(&zi->i_truncate_mutex); | |
| isize = i_size_read(inode); | |
| if (iocb->ki_pos >= isize) { | |
| mutex_unlock(&zi->i_truncate_mutex); | |
| ret = 0; | |
| goto inode_unlock; | |
| } | |
| iov_iter_truncate(to, isize - iocb->ki_pos); | |
| mutex_unlock(&zi->i_truncate_mutex); | |
| if (iocb->ki_flags & IOCB_DIRECT) { | |
| size_t count = iov_iter_count(to); | |
| if ((iocb->ki_pos | count) & (sb->s_blocksize - 1)) { | |
| ret = -EINVAL; | |
| goto inode_unlock; | |
| } | |
| file_accessed(iocb->ki_filp); | |
| ret = iomap_dio_rw(iocb, to, &zonefs_read_iomap_ops, | |
| &zonefs_read_dio_ops, 0, NULL, 0); | |
| } else { | |
| ret = generic_file_read_iter(iocb, to); | |
| if (ret == -EIO) | |
| zonefs_io_error(inode, false); | |
| } | |
| inode_unlock: | |
| inode_unlock_shared(inode); | |
| return ret; | |
| } | |
| static ssize_t zonefs_file_splice_read(struct file *in, loff_t *ppos, | |
| struct pipe_inode_info *pipe, | |
| size_t len, unsigned int flags) | |
| { | |
| struct inode *inode = file_inode(in); | |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); | |
| struct zonefs_zone *z = zonefs_inode_zone(inode); | |
| loff_t isize; | |
| ssize_t ret = 0; | |
| /* Offline zones cannot be read */ | |
| if (unlikely(IS_IMMUTABLE(inode) && !(inode->i_mode & 0777))) | |
| return -EPERM; | |
| if (*ppos >= z->z_capacity) | |
| return 0; | |
| inode_lock_shared(inode); | |
| /* Limit read operations to written data */ | |
| mutex_lock(&zi->i_truncate_mutex); | |
| isize = i_size_read(inode); | |
| if (*ppos >= isize) | |
| len = 0; | |
| else | |
| len = min_t(loff_t, len, isize - *ppos); | |
| mutex_unlock(&zi->i_truncate_mutex); | |
| if (len > 0) { | |
| ret = filemap_splice_read(in, ppos, pipe, len, flags); | |
| if (ret == -EIO) | |
| zonefs_io_error(inode, false); | |
| } | |
| inode_unlock_shared(inode); | |
| return ret; | |
| } | |
| /* | |
| * Write open accounting is done only for sequential files. | |
| */ | |
| static inline bool zonefs_seq_file_need_wro(struct inode *inode, | |
| struct file *file) | |
| { | |
| if (zonefs_inode_is_cnv(inode)) | |
| return false; | |
| if (!(file->f_mode & FMODE_WRITE)) | |
| return false; | |
| return true; | |
| } | |
| static int zonefs_seq_file_write_open(struct inode *inode) | |
| { | |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); | |
| struct zonefs_zone *z = zonefs_inode_zone(inode); | |
| int ret = 0; | |
| mutex_lock(&zi->i_truncate_mutex); | |
| if (!zi->i_wr_refcnt) { | |
| struct zonefs_sb_info *sbi = ZONEFS_SB(inode->i_sb); | |
| unsigned int wro = atomic_inc_return(&sbi->s_wro_seq_files); | |
| if (sbi->s_mount_opts & ZONEFS_MNTOPT_EXPLICIT_OPEN) { | |
| if (sbi->s_max_wro_seq_files | |
| && wro > sbi->s_max_wro_seq_files) { | |
| atomic_dec(&sbi->s_wro_seq_files); | |
| ret = -EBUSY; | |
| goto unlock; | |
| } | |
| if (i_size_read(inode) < z->z_capacity) { | |
| ret = zonefs_inode_zone_mgmt(inode, | |
| REQ_OP_ZONE_OPEN); | |
| if (ret) { | |
| atomic_dec(&sbi->s_wro_seq_files); | |
| goto unlock; | |
| } | |
| z->z_flags |= ZONEFS_ZONE_OPEN; | |
| zonefs_inode_account_active(inode); | |
| } | |
| } | |
| } | |
| zi->i_wr_refcnt++; | |
| unlock: | |
| mutex_unlock(&zi->i_truncate_mutex); | |
| return ret; | |
| } | |
| static int zonefs_file_open(struct inode *inode, struct file *file) | |
| { | |
| int ret; | |
| file->f_mode |= FMODE_CAN_ODIRECT; | |
| ret = generic_file_open(inode, file); | |
| if (ret) | |
| return ret; | |
| if (zonefs_seq_file_need_wro(inode, file)) | |
| return zonefs_seq_file_write_open(inode); | |
| return 0; | |
| } | |
| static void zonefs_seq_file_write_close(struct inode *inode) | |
| { | |
| struct zonefs_inode_info *zi = ZONEFS_I(inode); | |
| struct zonefs_zone *z = zonefs_inode_zone(inode); | |
| struct super_block *sb = inode->i_sb; | |
| struct zonefs_sb_info *sbi = ZONEFS_SB(sb); | |
| int ret = 0; | |
| mutex_lock(&zi->i_truncate_mutex); | |
| zi->i_wr_refcnt--; | |
| if (zi->i_wr_refcnt) | |
| goto unlock; | |
| /* | |
| * The file zone may not be open anymore (e.g. the file was truncated to | |
| * its maximum size or it was fully written). For this case, we only | |
| * need to decrement the write open count. | |
| */ | |
| if (z->z_flags & ZONEFS_ZONE_OPEN) { | |
| ret = zonefs_inode_zone_mgmt(inode, REQ_OP_ZONE_CLOSE); | |
| if (ret) { | |
| __zonefs_io_error(inode, false); | |
| /* | |
| * Leaving zones explicitly open may lead to a state | |
| * where most zones cannot be written (zone resources | |
| * exhausted). So take preventive action by remounting | |
| * read-only. | |
| */ | |
| if (z->z_flags & ZONEFS_ZONE_OPEN && | |
| !(sb->s_flags & SB_RDONLY)) { | |
| zonefs_warn(sb, | |
| "closing zone at %llu failed %d\n", | |
| z->z_sector, ret); | |
| zonefs_warn(sb, | |
| "remounting filesystem read-only\n"); | |
| sb->s_flags |= SB_RDONLY; | |
| } | |
| goto unlock; | |
| } | |
| z->z_flags &= ~ZONEFS_ZONE_OPEN; | |
| zonefs_inode_account_active(inode); | |
| } | |
| atomic_dec(&sbi->s_wro_seq_files); | |
| unlock: | |
| mutex_unlock(&zi->i_truncate_mutex); | |
| } | |
| static int zonefs_file_release(struct inode *inode, struct file *file) | |
| { | |
| /* | |
| * If we explicitly open a zone we must close it again as well, but the | |
| * zone management operation can fail (either due to an IO error or as | |
| * the zone has gone offline or read-only). Make sure we don't fail the | |
| * close(2) for user-space. | |
| */ | |
| if (zonefs_seq_file_need_wro(inode, file)) | |
| zonefs_seq_file_write_close(inode); | |
| return 0; | |
| } | |
| const struct file_operations zonefs_file_operations = { | |
| .open = zonefs_file_open, | |
| .release = zonefs_file_release, | |
| .fsync = zonefs_file_fsync, | |
| .mmap_prepare = zonefs_file_mmap_prepare, | |
| .llseek = zonefs_file_llseek, | |
| .read_iter = zonefs_file_read_iter, | |
| .write_iter = zonefs_file_write_iter, | |
| .splice_read = zonefs_file_splice_read, | |
| .splice_write = iter_file_splice_write, | |
| .iopoll = iocb_bio_iopoll, | |
| }; |