| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (c) 2000-2005 Silicon Graphics, Inc. | |
| * All Rights Reserved. | |
| */ | |
| #include "xfs_platform.h" | |
| #include "xfs_fs.h" | |
| #include "xfs_shared.h" | |
| #include "xfs_format.h" | |
| #include "xfs_log_format.h" | |
| #include "xfs_trans_resv.h" | |
| #include "xfs_sb.h" | |
| #include "xfs_mount.h" | |
| #include "xfs_inode.h" | |
| #include "xfs_trans.h" | |
| #include "xfs_quota.h" | |
| #include "xfs_qm.h" | |
| #include "xfs_icache.h" | |
| int | |
| xfs_qm_scall_quotaoff( | |
| xfs_mount_t *mp, | |
| uint flags) | |
| { | |
| /* | |
| * No file system can have quotas enabled on disk but not in core. | |
| * Note that quota utilities (like quotaoff) _expect_ | |
| * errno == -EEXIST here. | |
| */ | |
| if ((mp->m_qflags & flags) == 0) | |
| return -EEXIST; | |
| /* | |
| * We do not support actually turning off quota accounting any more. | |
| * Just log a warning and ignore the accounting related flags. | |
| */ | |
| if (flags & XFS_ALL_QUOTA_ACCT) | |
| xfs_info(mp, "disabling of quota accounting not supported."); | |
| mutex_lock(&mp->m_quotainfo->qi_quotaofflock); | |
| mp->m_qflags &= ~(flags & XFS_ALL_QUOTA_ENFD); | |
| spin_lock(&mp->m_sb_lock); | |
| mp->m_sb.sb_qflags = mp->m_qflags; | |
| spin_unlock(&mp->m_sb_lock); | |
| mutex_unlock(&mp->m_quotainfo->qi_quotaofflock); | |
| /* XXX what to do if error ? Revert back to old vals incore ? */ | |
| return xfs_sync_sb(mp, false); | |
| } | |
| STATIC int | |
| xfs_qm_scall_trunc_qfile( | |
| struct xfs_mount *mp, | |
| xfs_dqtype_t type) | |
| { | |
| struct xfs_inode *ip; | |
| struct xfs_trans *tp; | |
| int error; | |
| error = xfs_qm_qino_load(mp, type, &ip); | |
| if (error == -ENOENT) | |
| return 0; | |
| if (error) | |
| return error; | |
| xfs_ilock(ip, XFS_IOLOCK_EXCL); | |
| error = xfs_trans_alloc(mp, &M_RES(mp)->tr_itruncate, 0, 0, 0, &tp); | |
| if (error) { | |
| xfs_iunlock(ip, XFS_IOLOCK_EXCL); | |
| goto out_put; | |
| } | |
| xfs_ilock(ip, XFS_ILOCK_EXCL); | |
| xfs_trans_ijoin(tp, ip, 0); | |
| ip->i_disk_size = 0; | |
| xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); | |
| error = xfs_itruncate_extents(&tp, ip, XFS_DATA_FORK, 0); | |
| if (error) { | |
| xfs_trans_cancel(tp); | |
| goto out_unlock; | |
| } | |
| ASSERT(ip->i_df.if_nextents == 0); | |
| xfs_trans_ichgtime(tp, ip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG); | |
| error = xfs_trans_commit(tp); | |
| out_unlock: | |
| xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL); | |
| out_put: | |
| xfs_irele(ip); | |
| return error; | |
| } | |
| int | |
| xfs_qm_scall_trunc_qfiles( | |
| xfs_mount_t *mp, | |
| uint flags) | |
| { | |
| int error = -EINVAL; | |
| if (!xfs_has_quota(mp) || flags == 0 || | |
| (flags & ~XFS_QMOPT_QUOTALL)) { | |
| xfs_debug(mp, "%s: flags=%x m_qflags=%x", | |
| __func__, flags, mp->m_qflags); | |
| return -EINVAL; | |
| } | |
| if (flags & XFS_QMOPT_UQUOTA) { | |
| error = xfs_qm_scall_trunc_qfile(mp, XFS_DQTYPE_USER); | |
| if (error) | |
| return error; | |
| } | |
| if (flags & XFS_QMOPT_GQUOTA) { | |
| error = xfs_qm_scall_trunc_qfile(mp, XFS_DQTYPE_GROUP); | |
| if (error) | |
| return error; | |
| } | |
| if (flags & XFS_QMOPT_PQUOTA) | |
| error = xfs_qm_scall_trunc_qfile(mp, XFS_DQTYPE_PROJ); | |
| return error; | |
| } | |
| /* | |
| * Switch on (a given) quota enforcement for a filesystem. This takes | |
| * effect immediately. | |
| * (Switching on quota accounting must be done at mount time.) | |
| */ | |
| int | |
| xfs_qm_scall_quotaon( | |
| xfs_mount_t *mp, | |
| uint flags) | |
| { | |
| int error; | |
| uint qf; | |
| /* | |
| * Switching on quota accounting must be done at mount time, | |
| * only consider quota enforcement stuff here. | |
| */ | |
| flags &= XFS_ALL_QUOTA_ENFD; | |
| if (flags == 0) { | |
| xfs_debug(mp, "%s: zero flags, m_qflags=%x", | |
| __func__, mp->m_qflags); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Can't enforce without accounting. We check the superblock | |
| * qflags here instead of m_qflags because rootfs can have | |
| * quota acct on ondisk without m_qflags' knowing. | |
| */ | |
| if (((mp->m_sb.sb_qflags & XFS_UQUOTA_ACCT) == 0 && | |
| (flags & XFS_UQUOTA_ENFD)) || | |
| ((mp->m_sb.sb_qflags & XFS_GQUOTA_ACCT) == 0 && | |
| (flags & XFS_GQUOTA_ENFD)) || | |
| ((mp->m_sb.sb_qflags & XFS_PQUOTA_ACCT) == 0 && | |
| (flags & XFS_PQUOTA_ENFD))) { | |
| xfs_debug(mp, | |
| "%s: Can't enforce without acct, flags=%x sbflags=%x", | |
| __func__, flags, mp->m_sb.sb_qflags); | |
| return -EINVAL; | |
| } | |
| /* | |
| * If everything's up to-date incore, then don't waste time. | |
| */ | |
| if ((mp->m_qflags & flags) == flags) | |
| return -EEXIST; | |
| /* | |
| * Change sb_qflags on disk but not incore mp->qflags | |
| * if this is the root filesystem. | |
| */ | |
| spin_lock(&mp->m_sb_lock); | |
| qf = mp->m_sb.sb_qflags; | |
| mp->m_sb.sb_qflags = qf | flags; | |
| spin_unlock(&mp->m_sb_lock); | |
| /* | |
| * There's nothing to change if it's the same. | |
| */ | |
| if ((qf & flags) == flags) | |
| return -EEXIST; | |
| error = xfs_sync_sb(mp, false); | |
| if (error) | |
| return error; | |
| /* | |
| * If we aren't trying to switch on quota enforcement, we are done. | |
| */ | |
| if (((mp->m_sb.sb_qflags & XFS_UQUOTA_ACCT) != | |
| (mp->m_qflags & XFS_UQUOTA_ACCT)) || | |
| ((mp->m_sb.sb_qflags & XFS_PQUOTA_ACCT) != | |
| (mp->m_qflags & XFS_PQUOTA_ACCT)) || | |
| ((mp->m_sb.sb_qflags & XFS_GQUOTA_ACCT) != | |
| (mp->m_qflags & XFS_GQUOTA_ACCT))) | |
| return 0; | |
| if (!XFS_IS_QUOTA_ON(mp)) | |
| return -ESRCH; | |
| /* | |
| * Switch on quota enforcement in core. | |
| */ | |
| mutex_lock(&mp->m_quotainfo->qi_quotaofflock); | |
| mp->m_qflags |= (flags & XFS_ALL_QUOTA_ENFD); | |
| mutex_unlock(&mp->m_quotainfo->qi_quotaofflock); | |
| return 0; | |
| } | |
| #define XFS_QC_MASK (QC_LIMIT_MASK | QC_TIMER_MASK) | |
| /* | |
| * Adjust limits of this quota, and the defaults if passed in. Returns true | |
| * if the new limits made sense and were applied, false otherwise. | |
| */ | |
| static inline bool | |
| xfs_setqlim_limits( | |
| struct xfs_mount *mp, | |
| struct xfs_dquot_res *res, | |
| struct xfs_quota_limits *qlim, | |
| xfs_qcnt_t hard, | |
| xfs_qcnt_t soft, | |
| const char *tag) | |
| { | |
| /* The hard limit can't be less than the soft limit. */ | |
| if (hard != 0 && hard < soft) { | |
| xfs_debug(mp, "%shard %lld < %ssoft %lld", tag, hard, tag, | |
| soft); | |
| return false; | |
| } | |
| res->hardlimit = hard; | |
| res->softlimit = soft; | |
| if (qlim) { | |
| qlim->hard = hard; | |
| qlim->soft = soft; | |
| } | |
| return true; | |
| } | |
| static inline void | |
| xfs_setqlim_timer( | |
| struct xfs_mount *mp, | |
| struct xfs_dquot_res *res, | |
| struct xfs_quota_limits *qlim, | |
| s64 timer) | |
| { | |
| if (qlim) { | |
| /* Set the length of the default grace period. */ | |
| res->timer = xfs_dquot_set_grace_period(timer); | |
| qlim->time = res->timer; | |
| } else { | |
| /* Set the grace period expiration on a quota. */ | |
| res->timer = xfs_dquot_set_timeout(mp, timer); | |
| } | |
| } | |
| /* | |
| * Adjust quota limits, and start/stop timers accordingly. | |
| */ | |
| int | |
| xfs_qm_scall_setqlim( | |
| struct xfs_mount *mp, | |
| xfs_dqid_t id, | |
| xfs_dqtype_t type, | |
| struct qc_dqblk *newlim) | |
| { | |
| struct xfs_quotainfo *q = mp->m_quotainfo; | |
| struct xfs_dquot *dqp; | |
| struct xfs_trans *tp; | |
| struct xfs_def_quota *defq; | |
| struct xfs_dquot_res *res; | |
| struct xfs_quota_limits *qlim; | |
| int error; | |
| xfs_qcnt_t hard, soft; | |
| if (newlim->d_fieldmask & ~XFS_QC_MASK) | |
| return -EINVAL; | |
| if ((newlim->d_fieldmask & XFS_QC_MASK) == 0) | |
| return 0; | |
| /* | |
| * Get the dquot (locked) before we start, as we need to do a | |
| * transaction to allocate it if it doesn't exist. Once we have the | |
| * dquot, unlock it so we can start the next transaction safely. We hold | |
| * a reference to the dquot, so it's safe to do this unlock/lock without | |
| * it being reclaimed in the mean time. | |
| */ | |
| error = xfs_qm_dqget(mp, id, type, true, &dqp); | |
| if (error) { | |
| ASSERT(error != -ENOENT); | |
| return error; | |
| } | |
| defq = xfs_get_defquota(q, xfs_dquot_type(dqp)); | |
| error = xfs_trans_alloc(mp, &M_RES(mp)->tr_qm_setqlim, 0, 0, 0, &tp); | |
| if (error) | |
| goto out_rele; | |
| mutex_lock(&dqp->q_qlock); | |
| xfs_trans_dqjoin(tp, dqp); | |
| /* | |
| * Update quota limits, warnings, and timers, and the defaults | |
| * if we're touching id == 0. | |
| * | |
| * Make sure that hardlimits are >= soft limits before changing. | |
| * | |
| * Update warnings counter(s) if requested. | |
| * | |
| * Timelimits for the super user set the relative time the other users | |
| * can be over quota for this file system. If it is zero a default is | |
| * used. Ditto for the default soft and hard limit values (already | |
| * done, above), and for warnings. | |
| * | |
| * For other IDs, userspace can bump out the grace period if over | |
| * the soft limit. | |
| */ | |
| /* Blocks on the data device. */ | |
| hard = (newlim->d_fieldmask & QC_SPC_HARD) ? | |
| (xfs_qcnt_t) XFS_B_TO_FSB(mp, newlim->d_spc_hardlimit) : | |
| dqp->q_blk.hardlimit; | |
| soft = (newlim->d_fieldmask & QC_SPC_SOFT) ? | |
| (xfs_qcnt_t) XFS_B_TO_FSB(mp, newlim->d_spc_softlimit) : | |
| dqp->q_blk.softlimit; | |
| res = &dqp->q_blk; | |
| qlim = id == 0 ? &defq->blk : NULL; | |
| if (xfs_setqlim_limits(mp, res, qlim, hard, soft, "blk")) | |
| xfs_dquot_set_prealloc_limits(dqp); | |
| if (newlim->d_fieldmask & QC_SPC_TIMER) | |
| xfs_setqlim_timer(mp, res, qlim, newlim->d_spc_timer); | |
| /* Blocks on the realtime device. */ | |
| hard = (newlim->d_fieldmask & QC_RT_SPC_HARD) ? | |
| (xfs_qcnt_t) XFS_B_TO_FSB(mp, newlim->d_rt_spc_hardlimit) : | |
| dqp->q_rtb.hardlimit; | |
| soft = (newlim->d_fieldmask & QC_RT_SPC_SOFT) ? | |
| (xfs_qcnt_t) XFS_B_TO_FSB(mp, newlim->d_rt_spc_softlimit) : | |
| dqp->q_rtb.softlimit; | |
| res = &dqp->q_rtb; | |
| qlim = id == 0 ? &defq->rtb : NULL; | |
| xfs_setqlim_limits(mp, res, qlim, hard, soft, "rtb"); | |
| if (newlim->d_fieldmask & QC_RT_SPC_TIMER) | |
| xfs_setqlim_timer(mp, res, qlim, newlim->d_rt_spc_timer); | |
| /* Inodes */ | |
| hard = (newlim->d_fieldmask & QC_INO_HARD) ? | |
| (xfs_qcnt_t) newlim->d_ino_hardlimit : | |
| dqp->q_ino.hardlimit; | |
| soft = (newlim->d_fieldmask & QC_INO_SOFT) ? | |
| (xfs_qcnt_t) newlim->d_ino_softlimit : | |
| dqp->q_ino.softlimit; | |
| res = &dqp->q_ino; | |
| qlim = id == 0 ? &defq->ino : NULL; | |
| xfs_setqlim_limits(mp, res, qlim, hard, soft, "ino"); | |
| if (newlim->d_fieldmask & QC_INO_TIMER) | |
| xfs_setqlim_timer(mp, res, qlim, newlim->d_ino_timer); | |
| if (id != 0) { | |
| /* | |
| * If the user is now over quota, start the timelimit. | |
| * The user will not be 'warned'. | |
| * Note that we keep the timers ticking, whether enforcement | |
| * is on or off. We don't really want to bother with iterating | |
| * over all ondisk dquots and turning the timers on/off. | |
| */ | |
| xfs_qm_adjust_dqtimers(dqp); | |
| } | |
| dqp->q_flags |= XFS_DQFLAG_DIRTY; | |
| xfs_trans_log_dquot(tp, dqp); | |
| error = xfs_trans_commit(tp); | |
| out_rele: | |
| xfs_qm_dqrele(dqp); | |
| return error; | |
| } | |
| /* | |
| * Fill out the default quota limits for an ID that has no dquot on disk. | |
| * Returns 0 if default limits are configured | |
| * and were filled in, -ENOENT otherwise. | |
| */ | |
| static int | |
| xfs_qm_scall_getquota_fill_defaults( | |
| struct xfs_mount *mp, | |
| xfs_dqtype_t type, | |
| struct qc_dqblk *dst) | |
| { | |
| struct xfs_def_quota *defq; | |
| defq = xfs_get_defquota(mp->m_quotainfo, type); | |
| if (!defq->blk.soft && !defq->blk.hard && | |
| !defq->ino.soft && !defq->ino.hard && | |
| !defq->rtb.soft && !defq->rtb.hard) { | |
| return -ENOENT; | |
| } | |
| memset(dst, 0, sizeof(*dst)); | |
| dst->d_spc_softlimit = XFS_FSB_TO_B(mp, defq->blk.soft); | |
| dst->d_spc_hardlimit = XFS_FSB_TO_B(mp, defq->blk.hard); | |
| dst->d_ino_softlimit = defq->ino.soft; | |
| dst->d_ino_hardlimit = defq->ino.hard; | |
| dst->d_rt_spc_softlimit = XFS_FSB_TO_B(mp, defq->rtb.soft); | |
| dst->d_rt_spc_hardlimit = XFS_FSB_TO_B(mp, defq->rtb.hard); | |
| return 0; | |
| } | |
| /* Fill out the quota context. */ | |
| static void | |
| xfs_qm_scall_getquota_fill_qc( | |
| struct xfs_mount *mp, | |
| xfs_dqtype_t type, | |
| const struct xfs_dquot *dqp, | |
| struct qc_dqblk *dst) | |
| { | |
| memset(dst, 0, sizeof(*dst)); | |
| dst->d_spc_hardlimit = XFS_FSB_TO_B(mp, dqp->q_blk.hardlimit); | |
| dst->d_spc_softlimit = XFS_FSB_TO_B(mp, dqp->q_blk.softlimit); | |
| dst->d_ino_hardlimit = dqp->q_ino.hardlimit; | |
| dst->d_ino_softlimit = dqp->q_ino.softlimit; | |
| dst->d_space = XFS_FSB_TO_B(mp, dqp->q_blk.reserved); | |
| dst->d_ino_count = dqp->q_ino.reserved; | |
| dst->d_spc_timer = dqp->q_blk.timer; | |
| dst->d_ino_timer = dqp->q_ino.timer; | |
| dst->d_ino_warns = 0; | |
| dst->d_spc_warns = 0; | |
| dst->d_rt_spc_hardlimit = XFS_FSB_TO_B(mp, dqp->q_rtb.hardlimit); | |
| dst->d_rt_spc_softlimit = XFS_FSB_TO_B(mp, dqp->q_rtb.softlimit); | |
| dst->d_rt_space = XFS_FSB_TO_B(mp, dqp->q_rtb.reserved); | |
| dst->d_rt_spc_timer = dqp->q_rtb.timer; | |
| dst->d_rt_spc_warns = 0; | |
| /* | |
| * Internally, we don't reset all the timers when quota enforcement | |
| * gets turned off. No need to confuse the user level code, | |
| * so return zeroes in that case. | |
| */ | |
| if (!xfs_dquot_is_enforced(dqp)) { | |
| dst->d_spc_timer = 0; | |
| dst->d_ino_timer = 0; | |
| dst->d_rt_spc_timer = 0; | |
| } | |
| } | |
| /* Return the quota information for the dquot matching id. */ | |
| int | |
| xfs_qm_scall_getquota( | |
| struct xfs_mount *mp, | |
| xfs_dqid_t id, | |
| xfs_dqtype_t type, | |
| struct qc_dqblk *dst) | |
| { | |
| struct xfs_dquot *dqp; | |
| int error; | |
| /* | |
| * Expedite pending inodegc work at the start of a quota reporting | |
| * scan but don't block waiting for it to complete. | |
| */ | |
| if (id == 0) | |
| xfs_inodegc_push(mp); | |
| /* | |
| * Try to get the dquot. We don't want it allocated on disk, so don't | |
| * set doalloc. If it doesn't exist, we'll get ENOENT back. | |
| */ | |
| error = xfs_qm_dqget(mp, id, type, false, &dqp); | |
| if (error) { | |
| /* | |
| * If there is no dquot on disk and default limits are | |
| * configured, return them with zero usage so that | |
| * unprivileged users can see what limits apply to them. | |
| */ | |
| if (error == -ENOENT && id != 0 && | |
| !xfs_qm_scall_getquota_fill_defaults(mp, type, dst)) | |
| return 0; | |
| return error; | |
| } | |
| /* | |
| * If everything's NULL, this dquot doesn't quite exist as far as | |
| * our utility programs are concerned. | |
| */ | |
| mutex_lock(&dqp->q_qlock); | |
| if (XFS_IS_DQUOT_UNINITIALIZED(dqp)) { | |
| error = -ENOENT; | |
| goto out_put; | |
| } | |
| xfs_qm_scall_getquota_fill_qc(mp, type, dqp, dst); | |
| out_put: | |
| mutex_unlock(&dqp->q_qlock); | |
| xfs_qm_dqrele(dqp); | |
| return error; | |
| } | |
| /* | |
| * Return the quota information for the first initialized dquot whose id | |
| * is at least as high as id. | |
| */ | |
| int | |
| xfs_qm_scall_getquota_next( | |
| struct xfs_mount *mp, | |
| xfs_dqid_t *id, | |
| xfs_dqtype_t type, | |
| struct qc_dqblk *dst) | |
| { | |
| struct xfs_dquot *dqp; | |
| int error; | |
| /* Flush inodegc work at the start of a quota reporting scan. */ | |
| if (*id == 0) | |
| xfs_inodegc_push(mp); | |
| error = xfs_qm_dqget_next(mp, *id, type, &dqp); | |
| if (error) | |
| return error; | |
| /* Fill in the ID we actually read from disk */ | |
| *id = dqp->q_id; | |
| xfs_qm_scall_getquota_fill_qc(mp, type, dqp, dst); | |
| mutex_unlock(&dqp->q_qlock); | |
| xfs_qm_dqrele(dqp); | |
| return error; | |
| } |