| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (c) 2000-2005 Silicon Graphics, Inc. | |
| * All Rights Reserved. | |
| */ | |
| #include "xfs_platform.h" | |
| #include "xfs_fs.h" | |
| #include "xfs_shared.h" | |
| #include "xfs_format.h" | |
| #include "xfs_log_format.h" | |
| #include "xfs_trans_resv.h" | |
| #include "xfs_bit.h" | |
| #include "xfs_sb.h" | |
| #include "xfs_mount.h" | |
| #include "xfs_inode.h" | |
| #include "xfs_dir2.h" | |
| #include "xfs_ialloc.h" | |
| #include "xfs_alloc.h" | |
| #include "xfs_rtalloc.h" | |
| #include "xfs_bmap.h" | |
| #include "xfs_trans.h" | |
| #include "xfs_trans_priv.h" | |
| #include "xfs_log.h" | |
| #include "xfs_log_priv.h" | |
| #include "xfs_error.h" | |
| #include "xfs_quota.h" | |
| #include "xfs_fsops.h" | |
| #include "xfs_icache.h" | |
| #include "xfs_sysfs.h" | |
| #include "xfs_rmap_btree.h" | |
| #include "xfs_refcount_btree.h" | |
| #include "xfs_reflink.h" | |
| #include "xfs_extent_busy.h" | |
| #include "xfs_health.h" | |
| #include "xfs_trace.h" | |
| #include "xfs_ag.h" | |
| #include "xfs_rtbitmap.h" | |
| #include "xfs_metafile.h" | |
| #include "xfs_rtgroup.h" | |
| #include "xfs_rtrmap_btree.h" | |
| #include "xfs_rtrefcount_btree.h" | |
| #include "scrub/stats.h" | |
| #include "xfs_zone_alloc.h" | |
| #include "xfs_healthmon.h" | |
| static DEFINE_MUTEX(xfs_uuid_table_mutex); | |
| static DEFINE_XARRAY_ALLOC(xfs_uuid_table); | |
| static uuid_t * | |
| xfs_uuid_search( | |
| uuid_t *new_uuid) | |
| { | |
| unsigned long index = 0; | |
| uuid_t *uuid; | |
| xa_for_each(&xfs_uuid_table, index, uuid) { | |
| if (uuid_equal(uuid, new_uuid)) | |
| return uuid; | |
| } | |
| return NULL; | |
| } | |
| static void | |
| xfs_uuid_delete( | |
| uuid_t *uuid, | |
| unsigned int index) | |
| { | |
| ASSERT(uuid_equal(xa_load(&xfs_uuid_table, index), uuid)); | |
| xa_erase(&xfs_uuid_table, index); | |
| } | |
| void | |
| xfs_uuid_table_free(void) | |
| { | |
| ASSERT(xa_empty(&xfs_uuid_table)); | |
| xa_destroy(&xfs_uuid_table); | |
| } | |
| /* | |
| * See if the UUID is unique among mounted XFS filesystems. | |
| * Mount fails if UUID is nil or a FS with the same UUID is already mounted. | |
| */ | |
| STATIC int | |
| xfs_uuid_mount( | |
| struct xfs_mount *mp) | |
| { | |
| uuid_t *uuid = &mp->m_sb.sb_uuid; | |
| int ret; | |
| /* Publish UUID in struct super_block */ | |
| super_set_uuid(mp->m_super, uuid->b, sizeof(*uuid)); | |
| if (xfs_has_nouuid(mp)) | |
| return 0; | |
| if (uuid_is_null(uuid)) { | |
| xfs_warn(mp, "Filesystem has null UUID - can't mount"); | |
| return -EINVAL; | |
| } | |
| mutex_lock(&xfs_uuid_table_mutex); | |
| if (unlikely(xfs_uuid_search(uuid))) { | |
| xfs_warn(mp, "Filesystem has duplicate UUID %pU - can't mount", | |
| uuid); | |
| mutex_unlock(&xfs_uuid_table_mutex); | |
| return -EINVAL; | |
| } | |
| ret = xa_alloc(&xfs_uuid_table, &mp->m_uuid_table_index, uuid, | |
| xa_limit_32b, GFP_KERNEL); | |
| mutex_unlock(&xfs_uuid_table_mutex); | |
| return ret; | |
| } | |
| STATIC void | |
| xfs_uuid_unmount( | |
| struct xfs_mount *mp) | |
| { | |
| uuid_t *uuid = &mp->m_sb.sb_uuid; | |
| if (xfs_has_nouuid(mp)) | |
| return; | |
| mutex_lock(&xfs_uuid_table_mutex); | |
| xfs_uuid_delete(uuid, mp->m_uuid_table_index); | |
| mutex_unlock(&xfs_uuid_table_mutex); | |
| } | |
| /* | |
| * Check size of device based on the (data/realtime) block count. | |
| * Note: this check is used by the growfs code as well as mount. | |
| */ | |
| int | |
| xfs_sb_validate_fsb_count( | |
| xfs_sb_t *sbp, | |
| uint64_t nblocks) | |
| { | |
| uint64_t max_bytes; | |
| ASSERT(sbp->sb_blocklog >= BBSHIFT); | |
| if (check_shl_overflow(nblocks, sbp->sb_blocklog, &max_bytes)) | |
| return -EFBIG; | |
| /* Limited by ULONG_MAX of page cache index */ | |
| if (max_bytes >> PAGE_SHIFT > ULONG_MAX) | |
| return -EFBIG; | |
| return 0; | |
| } | |
| /* | |
| * xfs_readsb | |
| * | |
| * Does the initial read of the superblock. | |
| */ | |
| int | |
| xfs_readsb( | |
| struct xfs_mount *mp, | |
| int flags) | |
| { | |
| unsigned int sector_size; | |
| struct xfs_buf *bp; | |
| struct xfs_sb *sbp = &mp->m_sb; | |
| int error; | |
| int loud = !(flags & XFS_MFSI_QUIET); | |
| const struct xfs_buf_ops *buf_ops; | |
| ASSERT(mp->m_sb_bp == NULL); | |
| ASSERT(mp->m_ddev_targp != NULL); | |
| /* | |
| * In the first pass, use the device sector size to just read enough | |
| * of the superblock to extract the XFS sector size. | |
| * | |
| * The device sector size must be smaller than or equal to the XFS | |
| * sector size and thus we can always read the superblock. Once we know | |
| * the XFS sector size, re-read it and run the buffer verifier. | |
| */ | |
| sector_size = mp->m_ddev_targp->bt_logical_sectorsize; | |
| buf_ops = NULL; | |
| reread: | |
| error = xfs_buf_read_uncached(mp->m_ddev_targp, XFS_SB_DADDR, | |
| BTOBB(sector_size), &bp, buf_ops); | |
| if (error) { | |
| if (loud) | |
| xfs_warn(mp, "SB validate failed with error %d.", error); | |
| /* bad CRC means corrupted metadata */ | |
| if (error == -EFSBADCRC) | |
| error = -EFSCORRUPTED; | |
| return error; | |
| } | |
| /* | |
| * Initialize the mount structure from the superblock. | |
| */ | |
| xfs_sb_from_disk(sbp, bp->b_addr); | |
| /* | |
| * If we haven't validated the superblock, do so now before we try | |
| * to check the sector size and reread the superblock appropriately. | |
| */ | |
| if (sbp->sb_magicnum != XFS_SB_MAGIC) { | |
| if (loud) | |
| xfs_warn(mp, "Invalid superblock magic number"); | |
| error = -EINVAL; | |
| goto release_buf; | |
| } | |
| /* | |
| * We must be able to do sector-sized and sector-aligned IO. | |
| */ | |
| if (sector_size > sbp->sb_sectsize) { | |
| if (loud) | |
| xfs_warn(mp, "device supports %u byte sectors (not %u)", | |
| sector_size, sbp->sb_sectsize); | |
| error = -ENOSYS; | |
| goto release_buf; | |
| } | |
| if (buf_ops == NULL) { | |
| /* | |
| * Re-read the superblock so the buffer is correctly sized, | |
| * and properly verified. | |
| */ | |
| xfs_buf_relse(bp); | |
| sector_size = sbp->sb_sectsize; | |
| buf_ops = loud ? &xfs_sb_buf_ops : &xfs_sb_quiet_buf_ops; | |
| goto reread; | |
| } | |
| mp->m_features |= xfs_sb_version_to_features(sbp); | |
| xfs_reinit_percpu_counters(mp); | |
| /* | |
| * If logged xattrs are enabled after log recovery finishes, then set | |
| * the opstate so that log recovery will work properly. | |
| */ | |
| if (xfs_sb_version_haslogxattrs(&mp->m_sb)) | |
| xfs_set_using_logged_xattrs(mp); | |
| /* no need to be quiet anymore, so reset the buf ops */ | |
| bp->b_ops = &xfs_sb_buf_ops; | |
| /* | |
| * Keep a pointer of the sb buffer around instead of caching it in the | |
| * buffer cache because we access it frequently. | |
| */ | |
| mp->m_sb_bp = bp; | |
| xfs_buf_unlock(bp); | |
| return 0; | |
| release_buf: | |
| xfs_buf_relse(bp); | |
| return error; | |
| } | |
| /* | |
| * If the sunit/swidth change would move the precomputed root inode value, we | |
| * must reject the ondisk change because repair will stumble over that. | |
| * However, we allow the mount to proceed because we never rejected this | |
| * combination before. Returns true to update the sb, false otherwise. | |
| */ | |
| static inline int | |
| xfs_check_new_dalign( | |
| struct xfs_mount *mp, | |
| int new_dalign, | |
| bool *update_sb) | |
| { | |
| struct xfs_sb *sbp = &mp->m_sb; | |
| xfs_ino_t calc_ino; | |
| calc_ino = xfs_ialloc_calc_rootino(mp, new_dalign); | |
| trace_xfs_check_new_dalign(mp, new_dalign, calc_ino); | |
| if (sbp->sb_rootino == calc_ino) { | |
| *update_sb = true; | |
| return 0; | |
| } | |
| xfs_warn(mp, | |
| "Cannot change stripe alignment; would require moving root inode."); | |
| /* | |
| * XXX: Next time we add a new incompat feature, this should start | |
| * returning -EINVAL to fail the mount. Until then, spit out a warning | |
| * that we're ignoring the administrator's instructions. | |
| */ | |
| xfs_warn(mp, "Skipping superblock stripe alignment update."); | |
| *update_sb = false; | |
| return 0; | |
| } | |
| /* | |
| * If we were provided with new sunit/swidth values as mount options, make sure | |
| * that they pass basic alignment and superblock feature checks, and convert | |
| * them into the same units (FSB) that everything else expects. This step | |
| * /must/ be done before computing the inode geometry. | |
| */ | |
| STATIC int | |
| xfs_validate_new_dalign( | |
| struct xfs_mount *mp) | |
| { | |
| if (mp->m_dalign == 0) | |
| return 0; | |
| /* | |
| * If stripe unit and stripe width are not multiples | |
| * of the fs blocksize turn off alignment. | |
| */ | |
| if ((BBTOB(mp->m_dalign) & mp->m_blockmask) || | |
| (BBTOB(mp->m_swidth) & mp->m_blockmask)) { | |
| xfs_warn(mp, | |
| "alignment check failed: sunit/swidth vs. blocksize(%d)", | |
| mp->m_sb.sb_blocksize); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Convert the stripe unit and width to FSBs. | |
| */ | |
| mp->m_dalign = XFS_BB_TO_FSBT(mp, mp->m_dalign); | |
| if (mp->m_dalign && (mp->m_sb.sb_agblocks % mp->m_dalign)) { | |
| xfs_warn(mp, | |
| "alignment check failed: sunit/swidth vs. agsize(%d)", | |
| mp->m_sb.sb_agblocks); | |
| return -EINVAL; | |
| } | |
| if (!mp->m_dalign) { | |
| xfs_warn(mp, | |
| "alignment check failed: sunit(%d) less than bsize(%d)", | |
| mp->m_dalign, mp->m_sb.sb_blocksize); | |
| return -EINVAL; | |
| } | |
| mp->m_swidth = XFS_BB_TO_FSBT(mp, mp->m_swidth); | |
| if (!xfs_has_dalign(mp)) { | |
| xfs_warn(mp, | |
| "cannot change alignment: superblock does not support data alignment"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| /* Update alignment values based on mount options and sb values. */ | |
| STATIC int | |
| xfs_update_alignment( | |
| struct xfs_mount *mp) | |
| { | |
| struct xfs_sb *sbp = &mp->m_sb; | |
| if (mp->m_dalign) { | |
| bool update_sb; | |
| int error; | |
| if (sbp->sb_unit == mp->m_dalign && | |
| sbp->sb_width == mp->m_swidth) | |
| return 0; | |
| error = xfs_check_new_dalign(mp, mp->m_dalign, &update_sb); | |
| if (error || !update_sb) | |
| return error; | |
| sbp->sb_unit = mp->m_dalign; | |
| sbp->sb_width = mp->m_swidth; | |
| mp->m_update_sb = true; | |
| } else if (!xfs_has_noalign(mp) && xfs_has_dalign(mp)) { | |
| mp->m_dalign = sbp->sb_unit; | |
| mp->m_swidth = sbp->sb_width; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * precalculate the low space thresholds for dynamic speculative preallocation. | |
| */ | |
| void | |
| xfs_set_low_space_thresholds( | |
| struct xfs_mount *mp) | |
| { | |
| uint64_t dblocks = mp->m_sb.sb_dblocks; | |
| uint64_t rtexts = mp->m_sb.sb_rextents; | |
| int i; | |
| do_div(dblocks, 100); | |
| do_div(rtexts, 100); | |
| for (i = 0; i < XFS_LOWSP_MAX; i++) { | |
| mp->m_low_space[i] = dblocks * (i + 1); | |
| mp->m_low_rtexts[i] = rtexts * (i + 1); | |
| } | |
| } | |
| /* | |
| * Check that the data (and log if separate) is an ok size. | |
| */ | |
| STATIC int | |
| xfs_check_sizes( | |
| struct xfs_mount *mp) | |
| { | |
| struct xfs_buf *bp; | |
| xfs_daddr_t d; | |
| int error; | |
| d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks); | |
| if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_dblocks) { | |
| xfs_warn(mp, "filesystem size mismatch detected"); | |
| return -EFBIG; | |
| } | |
| error = xfs_buf_read_uncached(mp->m_ddev_targp, | |
| d - XFS_FSS_TO_BB(mp, 1), | |
| XFS_FSS_TO_BB(mp, 1), &bp, NULL); | |
| if (error) { | |
| xfs_warn(mp, "last sector read failed"); | |
| return error; | |
| } | |
| xfs_buf_relse(bp); | |
| if (mp->m_logdev_targp == mp->m_ddev_targp) | |
| return 0; | |
| d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_logblocks); | |
| if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_logblocks) { | |
| xfs_warn(mp, "log size mismatch detected"); | |
| return -EFBIG; | |
| } | |
| error = xfs_buf_read_uncached(mp->m_logdev_targp, | |
| d - XFS_FSB_TO_BB(mp, 1), | |
| XFS_FSB_TO_BB(mp, 1), &bp, NULL); | |
| if (error) { | |
| xfs_warn(mp, "log device read failed"); | |
| return error; | |
| } | |
| xfs_buf_relse(bp); | |
| return 0; | |
| } | |
| /* | |
| * Clear the quotaflags in memory and in the superblock. | |
| */ | |
| int | |
| xfs_mount_reset_sbqflags( | |
| struct xfs_mount *mp) | |
| { | |
| mp->m_qflags = 0; | |
| /* It is OK to look at sb_qflags in the mount path without m_sb_lock. */ | |
| if (mp->m_sb.sb_qflags == 0) | |
| return 0; | |
| spin_lock(&mp->m_sb_lock); | |
| mp->m_sb.sb_qflags = 0; | |
| spin_unlock(&mp->m_sb_lock); | |
| if (!xfs_fs_writable(mp, SB_FREEZE_WRITE)) | |
| return 0; | |
| return xfs_sync_sb(mp, false); | |
| } | |
| static const char *const xfs_free_pool_name[] = { | |
| [XC_FREE_BLOCKS] = "free blocks", | |
| [XC_FREE_RTEXTENTS] = "free rt extents", | |
| [XC_FREE_RTAVAILABLE] = "available rt extents", | |
| }; | |
| uint64_t | |
| xfs_default_resblks( | |
| struct xfs_mount *mp, | |
| enum xfs_free_counter ctr) | |
| { | |
| switch (ctr) { | |
| case XC_FREE_BLOCKS: | |
| /* | |
| * Default to 5% or 8192 FSBs of space reserved, whichever is | |
| * smaller. | |
| * | |
| * This is intended to cover concurrent allocation transactions | |
| * when we initially hit ENOSPC. These each require a 4 block | |
| * reservation. Hence by default we cover roughly 2000 | |
| * concurrent allocation reservations. | |
| */ | |
| return min(div_u64(mp->m_sb.sb_dblocks, 20), 8192ULL); | |
| case XC_FREE_RTEXTENTS: | |
| case XC_FREE_RTAVAILABLE: | |
| if (IS_ENABLED(CONFIG_XFS_RT) && xfs_has_zoned(mp)) | |
| return xfs_zoned_default_resblks(mp, ctr); | |
| return 0; | |
| default: | |
| ASSERT(0); | |
| return 0; | |
| } | |
| } | |
| /* Ensure the summary counts are correct. */ | |
| STATIC int | |
| xfs_check_summary_counts( | |
| struct xfs_mount *mp) | |
| { | |
| int error = 0; | |
| /* | |
| * The AG0 superblock verifier rejects in-progress filesystems, | |
| * so we should never see the flag set this far into mounting. | |
| */ | |
| if (mp->m_sb.sb_inprogress) { | |
| xfs_err(mp, "sb_inprogress set after log recovery??"); | |
| WARN_ON(1); | |
| return -EFSCORRUPTED; | |
| } | |
| /* | |
| * Now the log is mounted, we know if it was an unclean shutdown or | |
| * not. If it was, with the first phase of recovery has completed, we | |
| * have consistent AG blocks on disk. We have not recovered EFIs yet, | |
| * but they are recovered transactionally in the second recovery phase | |
| * later. | |
| * | |
| * If the log was clean when we mounted, we can check the summary | |
| * counters. If any of them are obviously incorrect, we can recompute | |
| * them from the AGF headers in the next step. | |
| */ | |
| if (xfs_is_clean(mp) && | |
| (mp->m_sb.sb_fdblocks > mp->m_sb.sb_dblocks || | |
| !xfs_verify_icount(mp, mp->m_sb.sb_icount) || | |
| mp->m_sb.sb_ifree > mp->m_sb.sb_icount)) | |
| xfs_fs_mark_sick(mp, XFS_SICK_FS_COUNTERS); | |
| /* | |
| * We can safely re-initialise incore superblock counters from the | |
| * per-ag data. These may not be correct if the filesystem was not | |
| * cleanly unmounted, so we waited for recovery to finish before doing | |
| * this. | |
| * | |
| * If the filesystem was cleanly unmounted or the previous check did | |
| * not flag anything weird, then we can trust the values in the | |
| * superblock to be correct and we don't need to do anything here. | |
| * Otherwise, recalculate the summary counters. | |
| */ | |
| if ((xfs_has_lazysbcount(mp) && !xfs_is_clean(mp)) || | |
| xfs_fs_has_sickness(mp, XFS_SICK_FS_COUNTERS)) { | |
| error = xfs_initialize_perag_data(mp, mp->m_sb.sb_agcount); | |
| if (error) | |
| return error; | |
| } | |
| /* | |
| * Older kernels misused sb_frextents to reflect both incore | |
| * reservations made by running transactions and the actual count of | |
| * free rt extents in the ondisk metadata. Transactions committed | |
| * during runtime can therefore contain a superblock update that | |
| * undercounts the number of free rt extents tracked in the rt bitmap. | |
| * A clean unmount record will have the correct frextents value since | |
| * there can be no other transactions running at that point. | |
| * | |
| * If we're mounting the rt volume after recovering the log, recompute | |
| * frextents from the rtbitmap file to fix the inconsistency. | |
| */ | |
| if (xfs_has_realtime(mp) && !xfs_has_zoned(mp) && !xfs_is_clean(mp)) { | |
| error = xfs_rtalloc_reinit_frextents(mp); | |
| if (error) | |
| return error; | |
| } | |
| return 0; | |
| } | |
| static void | |
| xfs_unmount_check( | |
| struct xfs_mount *mp) | |
| { | |
| if (xfs_is_shutdown(mp)) | |
| return; | |
| if (percpu_counter_sum(&mp->m_ifree) > | |
| percpu_counter_sum(&mp->m_icount)) { | |
| xfs_alert(mp, "ifree/icount mismatch at unmount"); | |
| xfs_fs_mark_sick(mp, XFS_SICK_FS_COUNTERS); | |
| } | |
| } | |
| /* | |
| * Flush and reclaim dirty inodes in preparation for unmount. Inodes and | |
| * internal inode structures can be sitting in the CIL and AIL at this point, | |
| * so we need to unpin them, write them back and/or reclaim them before unmount | |
| * can proceed. In other words, callers are required to have inactivated all | |
| * inodes. | |
| * | |
| * An inode cluster that has been freed can have its buffer still pinned in | |
| * memory because the transaction is still sitting in a iclog. The stale inodes | |
| * on that buffer will be pinned to the buffer until the transaction hits the | |
| * disk and the callbacks run. Pushing the AIL will skip the stale inodes and | |
| * may never see the pinned buffer, so nothing will push out the iclog and | |
| * unpin the buffer. | |
| * | |
| * Hence we need to force the log to unpin everything first. However, log | |
| * forces don't wait for the discards they issue to complete, so we have to | |
| * explicitly wait for them to complete here as well. | |
| * | |
| * Then we can tell the world we are unmounting so that error handling knows | |
| * that the filesystem is going away and we should error out anything that we | |
| * have been retrying in the background. This will prevent never-ending | |
| * retries in AIL pushing from hanging the unmount. | |
| * | |
| * Stop inodegc and background reclaim before pushing the AIL so that they | |
| * are not running while the AIL is being flushed. Then push the AIL to | |
| * clean all the remaining dirty objects and reclaim the remaining inodes. | |
| */ | |
| static void | |
| xfs_unmount_flush_inodes( | |
| struct xfs_mount *mp) | |
| { | |
| xfs_log_force(mp, XFS_LOG_SYNC); | |
| xfs_extent_busy_wait_all(mp); | |
| flush_workqueue(xfs_discard_wq); | |
| xfs_set_unmounting(mp); | |
| xfs_inodegc_stop(mp); | |
| cancel_delayed_work_sync(&mp->m_reclaim_work); | |
| xfs_ail_push_all_sync(mp->m_ail); | |
| xfs_reclaim_inodes(mp); | |
| xfs_health_unmount(mp); | |
| xfs_healthmon_unmount(mp); | |
| } | |
| static void | |
| xfs_mount_setup_inode_geom( | |
| struct xfs_mount *mp) | |
| { | |
| struct xfs_ino_geometry *igeo = M_IGEO(mp); | |
| igeo->attr_fork_offset = xfs_bmap_compute_attr_offset(mp); | |
| ASSERT(igeo->attr_fork_offset < XFS_LITINO(mp)); | |
| xfs_ialloc_setup_geometry(mp); | |
| } | |
| /* Mount the metadata directory tree root. */ | |
| STATIC int | |
| xfs_mount_setup_metadir( | |
| struct xfs_mount *mp) | |
| { | |
| int error; | |
| /* Load the metadata directory root inode into memory. */ | |
| error = xfs_metafile_iget(mp, mp->m_sb.sb_metadirino, XFS_METAFILE_DIR, | |
| &mp->m_metadirip); | |
| if (error) | |
| xfs_warn(mp, "Failed to load metadir root directory, error %d", | |
| error); | |
| return error; | |
| } | |
| /* Compute maximum possible height for per-AG btree types for this fs. */ | |
| static inline void | |
| xfs_agbtree_compute_maxlevels( | |
| struct xfs_mount *mp) | |
| { | |
| unsigned int levels; | |
| levels = max(mp->m_alloc_maxlevels, M_IGEO(mp)->inobt_maxlevels); | |
| levels = max(levels, mp->m_rmap_maxlevels); | |
| mp->m_agbtree_maxlevels = max(levels, mp->m_refc_maxlevels); | |
| } | |
| /* Maximum atomic write IO size that the kernel allows. */ | |
| static inline xfs_extlen_t xfs_calc_atomic_write_max(struct xfs_mount *mp) | |
| { | |
| return rounddown_pow_of_two(XFS_B_TO_FSB(mp, MAX_RW_COUNT)); | |
| } | |
| /* | |
| * If the underlying device advertises atomic write support, limit the size of | |
| * atomic writes to the greatest power-of-two factor of the group size so | |
| * that every atomic write unit aligns with the start of every group. This is | |
| * required so that the allocations for an atomic write will always be | |
| * aligned compatibly with the alignment requirements of the storage. | |
| * | |
| * If the device doesn't advertise atomic writes, then there are no alignment | |
| * restrictions and the largest out-of-place write we can do ourselves is the | |
| * number of blocks that user files can allocate from any group. | |
| */ | |
| static xfs_extlen_t | |
| xfs_calc_group_awu_max( | |
| struct xfs_mount *mp, | |
| enum xfs_group_type type) | |
| { | |
| struct xfs_groups *g = &mp->m_groups[type]; | |
| struct xfs_buftarg *btp = xfs_group_type_buftarg(mp, type); | |
| if (g->blocks == 0) | |
| return 0; | |
| if (btp && btp->bt_awu_min > 0) | |
| return max_pow_of_two_factor(g->blocks); | |
| return rounddown_pow_of_two(g->blocks); | |
| } | |
| /* Compute the maximum atomic write unit size for each section. */ | |
| static inline void | |
| xfs_calc_atomic_write_unit_max( | |
| struct xfs_mount *mp, | |
| enum xfs_group_type type) | |
| { | |
| struct xfs_groups *g = &mp->m_groups[type]; | |
| const xfs_extlen_t max_write = xfs_calc_atomic_write_max(mp); | |
| const xfs_extlen_t max_ioend = xfs_reflink_max_atomic_cow(mp); | |
| const xfs_extlen_t max_gsize = xfs_calc_group_awu_max(mp, type); | |
| g->awu_max = min3(max_write, max_ioend, max_gsize); | |
| trace_xfs_calc_atomic_write_unit_max(mp, type, max_write, max_ioend, | |
| max_gsize, g->awu_max); | |
| } | |
| /* | |
| * Try to set the atomic write maximum to a new value that we got from | |
| * userspace via mount option. | |
| */ | |
| int | |
| xfs_set_max_atomic_write_opt( | |
| struct xfs_mount *mp, | |
| unsigned long long new_max_bytes) | |
| { | |
| const xfs_filblks_t new_max_fsbs = XFS_B_TO_FSBT(mp, new_max_bytes); | |
| const xfs_extlen_t max_write = xfs_calc_atomic_write_max(mp); | |
| const xfs_extlen_t max_group = | |
| max(mp->m_groups[XG_TYPE_AG].blocks, | |
| mp->m_groups[XG_TYPE_RTG].blocks); | |
| const xfs_extlen_t max_group_write = | |
| max(xfs_calc_group_awu_max(mp, XG_TYPE_AG), | |
| xfs_calc_group_awu_max(mp, XG_TYPE_RTG)); | |
| int error; | |
| if (new_max_bytes == 0) | |
| goto set_limit; | |
| ASSERT(max_write <= U32_MAX); | |
| /* generic_atomic_write_valid enforces power of two length */ | |
| if (!is_power_of_2(new_max_bytes)) { | |
| xfs_warn(mp, | |
| "max atomic write size of %llu bytes is not a power of 2", | |
| new_max_bytes); | |
| return -EINVAL; | |
| } | |
| if (new_max_bytes & mp->m_blockmask) { | |
| xfs_warn(mp, | |
| "max atomic write size of %llu bytes not aligned with fsblock", | |
| new_max_bytes); | |
| return -EINVAL; | |
| } | |
| if (new_max_fsbs > max_write) { | |
| xfs_warn(mp, | |
| "max atomic write size of %lluk cannot be larger than max write size %lluk", | |
| new_max_bytes >> 10, | |
| XFS_FSB_TO_B(mp, max_write) >> 10); | |
| return -EINVAL; | |
| } | |
| if (new_max_fsbs > max_group) { | |
| xfs_warn(mp, | |
| "max atomic write size of %lluk cannot be larger than allocation group size %lluk", | |
| new_max_bytes >> 10, | |
| XFS_FSB_TO_B(mp, max_group) >> 10); | |
| return -EINVAL; | |
| } | |
| if (new_max_fsbs > max_group_write) { | |
| xfs_warn(mp, | |
| "max atomic write size of %lluk cannot be larger than max allocation group write size %lluk", | |
| new_max_bytes >> 10, | |
| XFS_FSB_TO_B(mp, max_group_write) >> 10); | |
| return -EINVAL; | |
| } | |
| if (xfs_has_reflink(mp)) | |
| goto set_limit; | |
| if (new_max_fsbs == 1) { | |
| if (mp->m_ddev_targp->bt_awu_max || | |
| (mp->m_rtdev_targp && mp->m_rtdev_targp->bt_awu_max)) { | |
| } else { | |
| xfs_warn(mp, | |
| "cannot support atomic writes of size %lluk with no reflink or HW support", | |
| new_max_bytes >> 10); | |
| return -EINVAL; | |
| } | |
| } else { | |
| xfs_warn(mp, | |
| "cannot support atomic writes of size %lluk with no reflink support", | |
| new_max_bytes >> 10); | |
| return -EINVAL; | |
| } | |
| set_limit: | |
| error = xfs_calc_atomic_write_reservation(mp, new_max_fsbs); | |
| if (error) { | |
| xfs_warn(mp, | |
| "cannot support completing atomic writes of %lluk", | |
| new_max_bytes >> 10); | |
| return error; | |
| } | |
| xfs_calc_atomic_write_unit_max(mp, XG_TYPE_AG); | |
| xfs_calc_atomic_write_unit_max(mp, XG_TYPE_RTG); | |
| mp->m_awu_max_bytes = new_max_bytes; | |
| return 0; | |
| } | |
| /* Compute maximum possible height for realtime btree types for this fs. */ | |
| static inline void | |
| xfs_rtbtree_compute_maxlevels( | |
| struct xfs_mount *mp) | |
| { | |
| mp->m_rtbtree_maxlevels = max(mp->m_rtrmap_maxlevels, | |
| mp->m_rtrefc_maxlevels); | |
| } | |
| /* | |
| * This function does the following on an initial mount of a file system: | |
| * - reads the superblock from disk and init the mount struct | |
| * - if we're a 32-bit kernel, do a size check on the superblock | |
| * so we don't mount terabyte filesystems | |
| * - init mount struct realtime fields | |
| * - allocate inode hash table for fs | |
| * - init directory manager | |
| * - perform recovery and init the log manager | |
| */ | |
| int | |
| xfs_mountfs( | |
| struct xfs_mount *mp) | |
| { | |
| struct xfs_sb *sbp = &(mp->m_sb); | |
| struct xfs_inode *rip; | |
| struct xfs_ino_geometry *igeo = M_IGEO(mp); | |
| uint quotamount = 0; | |
| uint quotaflags = 0; | |
| int error = 0; | |
| int i; | |
| xfs_sb_mount_common(mp, sbp); | |
| /* | |
| * Check for a mismatched features2 values. Older kernels read & wrote | |
| * into the wrong sb offset for sb_features2 on some platforms due to | |
| * xfs_sb_t not being 64bit size aligned when sb_features2 was added, | |
| * which made older superblock reading/writing routines swap it as a | |
| * 64-bit value. | |
| * | |
| * For backwards compatibility, we make both slots equal. | |
| * | |
| * If we detect a mismatched field, we OR the set bits into the existing | |
| * features2 field in case it has already been modified; we don't want | |
| * to lose any features. We then update the bad location with the ORed | |
| * value so that older kernels will see any features2 flags. The | |
| * superblock writeback code ensures the new sb_features2 is copied to | |
| * sb_bad_features2 before it is logged or written to disk. | |
| */ | |
| if (xfs_sb_has_mismatched_features2(sbp)) { | |
| xfs_warn(mp, "correcting sb_features alignment problem"); | |
| sbp->sb_features2 |= sbp->sb_bad_features2; | |
| mp->m_update_sb = true; | |
| } | |
| /* always use v2 inodes by default now */ | |
| if (!(mp->m_sb.sb_versionnum & XFS_SB_VERSION_NLINKBIT)) { | |
| mp->m_sb.sb_versionnum |= XFS_SB_VERSION_NLINKBIT; | |
| mp->m_features |= XFS_FEAT_NLINK; | |
| mp->m_update_sb = true; | |
| } | |
| /* | |
| * If we were given new sunit/swidth options, do some basic validation | |
| * checks and convert the incore dalign and swidth values to the | |
| * same units (FSB) that everything else uses. This /must/ happen | |
| * before computing the inode geometry. | |
| */ | |
| error = xfs_validate_new_dalign(mp); | |
| if (error) | |
| goto out; | |
| xfs_alloc_compute_maxlevels(mp); | |
| xfs_bmap_compute_maxlevels(mp, XFS_DATA_FORK); | |
| xfs_bmap_compute_maxlevels(mp, XFS_ATTR_FORK); | |
| xfs_mount_setup_inode_geom(mp); | |
| xfs_rmapbt_compute_maxlevels(mp); | |
| xfs_rtrmapbt_compute_maxlevels(mp); | |
| xfs_refcountbt_compute_maxlevels(mp); | |
| xfs_rtrefcountbt_compute_maxlevels(mp); | |
| xfs_agbtree_compute_maxlevels(mp); | |
| xfs_rtbtree_compute_maxlevels(mp); | |
| /* | |
| * Check if sb_agblocks is aligned at stripe boundary. If sb_agblocks | |
| * is NOT aligned turn off m_dalign since allocator alignment is within | |
| * an ag, therefore ag has to be aligned at stripe boundary. Note that | |
| * we must compute the free space and rmap btree geometry before doing | |
| * this. | |
| */ | |
| error = xfs_update_alignment(mp); | |
| if (error) | |
| goto out; | |
| /* enable fail_at_unmount as default */ | |
| mp->m_fail_unmount = true; | |
| error = xfs_mount_sysfs_init(mp); | |
| if (error) | |
| goto out_remove_scrub_stats; | |
| xchk_stats_register(mp->m_scrub_stats, mp->m_debugfs); | |
| error = xfs_errortag_init(mp); | |
| if (error) | |
| goto out_remove_sysfs; | |
| error = xfs_uuid_mount(mp); | |
| if (error) | |
| goto out_remove_errortag; | |
| /* | |
| * Update the preferred write size based on the information from the | |
| * on-disk superblock. | |
| */ | |
| mp->m_allocsize_log = | |
| max_t(uint32_t, sbp->sb_blocklog, mp->m_allocsize_log); | |
| mp->m_allocsize_blocks = 1U << (mp->m_allocsize_log - sbp->sb_blocklog); | |
| /* set the low space thresholds for dynamic preallocation */ | |
| xfs_set_low_space_thresholds(mp); | |
| /* | |
| * If enabled, sparse inode chunk alignment is expected to match the | |
| * cluster size. Full inode chunk alignment must match the chunk size, | |
| * but that is checked on sb read verification... | |
| */ | |
| if (xfs_has_sparseinodes(mp) && | |
| mp->m_sb.sb_spino_align != | |
| XFS_B_TO_FSBT(mp, igeo->inode_cluster_size_raw)) { | |
| xfs_warn(mp, | |
| "Sparse inode block alignment (%u) must match cluster size (%llu).", | |
| mp->m_sb.sb_spino_align, | |
| XFS_B_TO_FSBT(mp, igeo->inode_cluster_size_raw)); | |
| error = -EINVAL; | |
| goto out_remove_uuid; | |
| } | |
| /* | |
| * Check that the data (and log if separate) is an ok size. | |
| */ | |
| error = xfs_check_sizes(mp); | |
| if (error) | |
| goto out_remove_uuid; | |
| /* | |
| * Initialize realtime fields in the mount structure | |
| */ | |
| error = xfs_rtmount_init(mp); | |
| if (error) { | |
| xfs_warn(mp, "RT mount failed"); | |
| goto out_remove_uuid; | |
| } | |
| /* | |
| * Copies the low order bits of the timestamp and the randomly | |
| * set "sequence" number out of a UUID. | |
| */ | |
| mp->m_fixedfsid[0] = | |
| (get_unaligned_be16(&sbp->sb_uuid.b[8]) << 16) | | |
| get_unaligned_be16(&sbp->sb_uuid.b[4]); | |
| mp->m_fixedfsid[1] = get_unaligned_be32(&sbp->sb_uuid.b[0]); | |
| error = xfs_da_mount(mp); | |
| if (error) { | |
| xfs_warn(mp, "Failed dir/attr init: %d", error); | |
| goto out_remove_uuid; | |
| } | |
| /* | |
| * Initialize the precomputed transaction reservations values. | |
| */ | |
| xfs_trans_init(mp); | |
| /* | |
| * Allocate and initialize the per-ag data. | |
| */ | |
| error = xfs_initialize_perag(mp, 0, sbp->sb_agcount, | |
| mp->m_sb.sb_dblocks, &mp->m_maxagi); | |
| if (error) { | |
| xfs_warn(mp, "Failed per-ag init: %d", error); | |
| goto out_free_dir; | |
| } | |
| error = xfs_initialize_rtgroups(mp, 0, sbp->sb_rgcount, | |
| mp->m_sb.sb_rextents); | |
| if (error) { | |
| xfs_warn(mp, "Failed rtgroup init: %d", error); | |
| goto out_free_perag; | |
| } | |
| if (XFS_IS_CORRUPT(mp, !sbp->sb_logblocks)) { | |
| xfs_warn(mp, "no log defined"); | |
| error = -EFSCORRUPTED; | |
| goto out_free_rtgroup; | |
| } | |
| error = xfs_inodegc_register_shrinker(mp); | |
| if (error) | |
| goto out_fail_wait; | |
| /* | |
| * If we're resuming quota status, pick up the preliminary qflags from | |
| * the ondisk superblock so that we know if we should recover dquots. | |
| */ | |
| if (xfs_is_resuming_quotaon(mp)) | |
| xfs_qm_resume_quotaon(mp); | |
| /* | |
| * Log's mount-time initialization. The first part of recovery can place | |
| * some items on the AIL, to be handled when recovery is finished or | |
| * cancelled. | |
| */ | |
| error = xfs_log_mount(mp, mp->m_logdev_targp, | |
| XFS_FSB_TO_DADDR(mp, sbp->sb_logstart), | |
| XFS_FSB_TO_BB(mp, sbp->sb_logblocks)); | |
| if (error) { | |
| xfs_warn(mp, "log mount failed"); | |
| goto out_inodegc_shrinker; | |
| } | |
| /* | |
| * If we're resuming quota status and recovered the log, re-sample the | |
| * qflags from the ondisk superblock now that we've recovered it, just | |
| * in case someone shut down enforcement just before a crash. | |
| */ | |
| if (xfs_clear_resuming_quotaon(mp) && xlog_recovery_needed(mp->m_log)) | |
| xfs_qm_resume_quotaon(mp); | |
| /* | |
| * If logged xattrs are still enabled after log recovery finishes, then | |
| * they'll be available until unmount. Otherwise, turn them off. | |
| */ | |
| if (xfs_sb_version_haslogxattrs(&mp->m_sb)) | |
| xfs_set_using_logged_xattrs(mp); | |
| else | |
| xfs_clear_using_logged_xattrs(mp); | |
| /* Enable background inode inactivation workers. */ | |
| xfs_inodegc_start(mp); | |
| xfs_blockgc_start(mp); | |
| if (xfs_has_metadir(mp)) { | |
| error = xfs_mount_setup_metadir(mp); | |
| if (error) | |
| goto out_free_metadir; | |
| } | |
| /* | |
| * Get and sanity-check the root inode. | |
| * Save the pointer to it in the mount structure. | |
| */ | |
| error = xfs_iget(mp, NULL, sbp->sb_rootino, XFS_IGET_UNTRUSTED, | |
| XFS_ILOCK_EXCL, &rip); | |
| if (error) { | |
| xfs_warn(mp, | |
| "Failed to read root inode 0x%llx, error %d", | |
| sbp->sb_rootino, -error); | |
| goto out_free_metadir; | |
| } | |
| ASSERT(rip != NULL); | |
| if (XFS_IS_CORRUPT(mp, !S_ISDIR(VFS_I(rip)->i_mode))) { | |
| xfs_warn(mp, "corrupted root inode %llu: not a directory", | |
| (unsigned long long)I_INO(rip)); | |
| xfs_iunlock(rip, XFS_ILOCK_EXCL); | |
| error = -EFSCORRUPTED; | |
| goto out_rele_rip; | |
| } | |
| mp->m_rootip = rip; /* save it */ | |
| xfs_iunlock(rip, XFS_ILOCK_EXCL); | |
| /* | |
| * Initialize realtime inode pointers in the mount structure | |
| */ | |
| error = xfs_rtmount_inodes(mp); | |
| if (error) { | |
| /* | |
| * Free up the root inode. | |
| */ | |
| xfs_warn(mp, "failed to read RT inodes"); | |
| goto out_rele_rip; | |
| } | |
| /* Make sure the summary counts are ok. */ | |
| error = xfs_check_summary_counts(mp); | |
| if (error) | |
| goto out_rtunmount; | |
| /* | |
| * If this is a read-only mount defer the superblock updates until | |
| * the next remount into writeable mode. Otherwise we would never | |
| * perform the update e.g. for the root filesystem. | |
| */ | |
| if (mp->m_update_sb && !xfs_is_readonly(mp)) { | |
| error = xfs_sync_sb(mp, false); | |
| if (error) { | |
| xfs_warn(mp, "failed to write sb changes"); | |
| goto out_rtunmount; | |
| } | |
| } | |
| /* | |
| * Initialise the XFS quota management subsystem for this mount | |
| */ | |
| if (XFS_IS_QUOTA_ON(mp)) { | |
| error = xfs_qm_newmount(mp, "amount, "aflags); | |
| if (error) | |
| goto out_rtunmount; | |
| } else { | |
| /* | |
| * If a file system had quotas running earlier, but decided to | |
| * mount without -o uquota/pquota/gquota options, revoke the | |
| * quotachecked license. | |
| */ | |
| if (mp->m_sb.sb_qflags & XFS_ALL_QUOTA_ACCT) { | |
| xfs_notice(mp, "resetting quota flags"); | |
| error = xfs_mount_reset_sbqflags(mp); | |
| if (error) | |
| goto out_rtunmount; | |
| } | |
| } | |
| /* | |
| * Finish recovering the file system. This part needed to be delayed | |
| * until after the root and real-time bitmap inodes were consistently | |
| * read in. Temporarily create per-AG space reservations for metadata | |
| * btree shape changes because space freeing transactions (for inode | |
| * inactivation) require the per-AG reservation in lieu of reserving | |
| * blocks. | |
| */ | |
| error = xfs_fs_reserve_ag_blocks(mp); | |
| if (error) { | |
| if (error != -ENOSPC) | |
| goto out_rtunmount; | |
| xfs_warn(mp, | |
| "ENOSPC reserving per-AG metadata pool, log recovery may fail."); | |
| } | |
| error = xfs_log_mount_finish(mp); | |
| xfs_fs_unreserve_ag_blocks(mp); | |
| if (error) { | |
| xfs_warn(mp, "log mount finish failed"); | |
| goto out_rtunmount; | |
| } | |
| /* | |
| * Now the log is fully replayed, we can transition to full read-only | |
| * mode for read-only mounts. This will sync all the metadata and clean | |
| * the log so that the recovery we just performed does not have to be | |
| * replayed again on the next mount. | |
| * | |
| * We use the same quiesce mechanism as the rw->ro remount, as they are | |
| * semantically identical operations. | |
| */ | |
| if (xfs_is_readonly(mp) && !xfs_has_norecovery(mp)) | |
| xfs_log_clean(mp); | |
| if (xfs_has_zoned(mp)) { | |
| error = xfs_mount_zones(mp); | |
| if (error) | |
| goto out_rtunmount; | |
| } | |
| /* | |
| * Complete the quota initialisation, post-log-replay component. | |
| */ | |
| if (quotamount) { | |
| ASSERT(mp->m_qflags == 0); | |
| mp->m_qflags = quotaflags; | |
| xfs_qm_mount_quotas(mp); | |
| } | |
| /* | |
| * Now we are mounted, reserve a small amount of unused space for | |
| * privileged transactions. This is needed so that transaction | |
| * space required for critical operations can dip into this pool | |
| * when at ENOSPC. This is needed for operations like create with | |
| * attr, unwritten extent conversion at ENOSPC, garbage collection | |
| * etc. Data allocations are not allowed to use this reserved space. | |
| * | |
| * This may drive us straight to ENOSPC on mount, but that implies | |
| * we were already there on the last unmount. Warn if this occurs. | |
| */ | |
| if (!xfs_is_readonly(mp)) { | |
| for (i = 0; i < XC_FREE_NR; i++) { | |
| error = xfs_reserve_blocks(mp, i, | |
| xfs_default_resblks(mp, i)); | |
| if (error) | |
| xfs_warn(mp, | |
| "Unable to allocate reserve blocks. Continuing without reserve pool for %s.", | |
| xfs_free_pool_name[i]); | |
| } | |
| /* Reserve AG blocks for future btree expansion. */ | |
| error = xfs_fs_reserve_ag_blocks(mp); | |
| if (error && error != -ENOSPC) | |
| goto out_agresv; | |
| xfs_zone_gc_start(mp); | |
| } | |
| /* | |
| * Pre-calculate atomic write unit max. This involves computations | |
| * derived from transaction reservations, so we must do this after the | |
| * log is fully initialized. | |
| */ | |
| error = xfs_set_max_atomic_write_opt(mp, mp->m_awu_max_bytes); | |
| if (error) | |
| goto out_agresv; | |
| return 0; | |
| out_agresv: | |
| xfs_fs_unreserve_ag_blocks(mp); | |
| xfs_qm_unmount_quotas(mp); | |
| if (xfs_has_zoned(mp)) | |
| xfs_unmount_zones(mp); | |
| out_rtunmount: | |
| xfs_rtunmount_inodes(mp); | |
| out_rele_rip: | |
| xfs_irele(rip); | |
| /* Clean out dquots that might be in memory after quotacheck. */ | |
| xfs_qm_unmount(mp); | |
| out_free_metadir: | |
| if (mp->m_metadirip) | |
| xfs_irele(mp->m_metadirip); | |
| /* | |
| * The mount has failed. Mark the filesystem shut down so that any | |
| * inodes still queued for background inactivation are dropped | |
| * straight to reclaim instead of being inactivated: a failed mount | |
| * must not write to the (possibly corrupt, only partially set up) | |
| * persistent metadata, and parts of the mount it would need - e.g. | |
| * the quota subsystem (mp->m_quotainfo) - may never have been | |
| * initialised. | |
| * | |
| * Flush the queue so that those inodes are pulled down and reclaim | |
| * can free them; with the fs shut down xfs_inodegc_inactivate() | |
| * turns each one reclaimable without touching the on-disk structures. | |
| */ | |
| xfs_force_shutdown(mp, SHUTDOWN_META_IO_ERROR); | |
| xfs_inodegc_flush(mp); | |
| /* | |
| * Flush all inode reclamation work and flush the log. | |
| * We have to do this /after/ rtunmount and qm_unmount because those | |
| * two will have scheduled delayed reclaim for the rt/quota inodes. | |
| * | |
| * This is slightly different from the unmountfs call sequence | |
| * because we could be tearing down a partially set up mount. In | |
| * particular, if log_mount_finish fails we bail out without calling | |
| * qm_unmount_quotas and therefore rely on qm_unmount to release the | |
| * quota inodes. | |
| */ | |
| xfs_unmount_flush_inodes(mp); | |
| xfs_log_mount_cancel(mp); | |
| out_inodegc_shrinker: | |
| shrinker_free(mp->m_inodegc_shrinker); | |
| out_fail_wait: | |
| if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp) | |
| xfs_buftarg_drain(mp->m_logdev_targp); | |
| xfs_buftarg_drain(mp->m_ddev_targp); | |
| out_free_rtgroup: | |
| xfs_free_rtgroups(mp, 0, mp->m_sb.sb_rgcount); | |
| out_free_perag: | |
| xfs_free_perag_range(mp, 0, mp->m_sb.sb_agcount); | |
| out_free_dir: | |
| xfs_da_unmount(mp); | |
| out_remove_uuid: | |
| xfs_uuid_unmount(mp); | |
| out_remove_errortag: | |
| xfs_errortag_del(mp); | |
| out_remove_sysfs: | |
| xfs_mount_sysfs_del(mp); | |
| out_remove_scrub_stats: | |
| xchk_stats_unregister(mp->m_scrub_stats); | |
| out: | |
| return error; | |
| } | |
| /* | |
| * This flushes out the inodes,dquots and the superblock, unmounts the | |
| * log and makes sure that incore structures are freed. | |
| */ | |
| void | |
| xfs_unmountfs( | |
| struct xfs_mount *mp) | |
| { | |
| int error; | |
| /* | |
| * Perform all on-disk metadata updates required to inactivate inodes | |
| * that the VFS evicted earlier in the unmount process. Freeing inodes | |
| * and discarding CoW fork preallocations can cause shape changes to | |
| * the free inode and refcount btrees, respectively, so we must finish | |
| * this before we discard the metadata space reservations. Metadata | |
| * inodes and the root directory do not require inactivation. | |
| */ | |
| xfs_inodegc_flush(mp); | |
| xfs_blockgc_stop(mp); | |
| if (!test_bit(XFS_OPSTATE_READONLY, &mp->m_opstate)) | |
| xfs_zone_gc_stop(mp); | |
| xfs_fs_unreserve_ag_blocks(mp); | |
| xfs_qm_unmount_quotas(mp); | |
| if (xfs_has_zoned(mp)) | |
| xfs_unmount_zones(mp); | |
| xfs_rtunmount_inodes(mp); | |
| xfs_irele(mp->m_rootip); | |
| if (mp->m_metadirip) | |
| xfs_irele(mp->m_metadirip); | |
| xfs_unmount_flush_inodes(mp); | |
| xfs_qm_unmount(mp); | |
| /* | |
| * Unreserve any blocks we have so that when we unmount we don't account | |
| * the reserved free space as used. This is really only necessary for | |
| * lazy superblock counting because it trusts the incore superblock | |
| * counters to be absolutely correct on clean unmount. | |
| * | |
| * We don't bother correcting this elsewhere for lazy superblock | |
| * counting because on mount of an unclean filesystem we reconstruct the | |
| * correct counter value and this is irrelevant. | |
| * | |
| * For non-lazy counter filesystems, this doesn't matter at all because | |
| * we only every apply deltas to the superblock and hence the incore | |
| * value does not matter.... | |
| */ | |
| error = xfs_reserve_blocks(mp, XC_FREE_BLOCKS, 0); | |
| if (error) | |
| xfs_warn(mp, "Unable to free reserved block pool. " | |
| "Freespace may not be correct on next mount."); | |
| xfs_unmount_check(mp); | |
| /* | |
| * Indicate that it's ok to clear log incompat bits before cleaning | |
| * the log and writing the unmount record. | |
| */ | |
| xfs_set_done_with_log_incompat(mp); | |
| xfs_log_unmount(mp); | |
| xfs_da_unmount(mp); | |
| xfs_uuid_unmount(mp); | |
| #if defined(DEBUG) | |
| xfs_errortag_clearall(mp); | |
| #endif | |
| shrinker_free(mp->m_inodegc_shrinker); | |
| xfs_free_rtgroups(mp, 0, mp->m_sb.sb_rgcount); | |
| xfs_free_perag_range(mp, 0, mp->m_sb.sb_agcount); | |
| xfs_errortag_del(mp); | |
| xchk_stats_unregister(mp->m_scrub_stats); | |
| xfs_mount_sysfs_del(mp); | |
| } | |
| /* | |
| * Determine whether modifications can proceed. The caller specifies the minimum | |
| * freeze level for which modifications should not be allowed. This allows | |
| * certain operations to proceed while the freeze sequence is in progress, if | |
| * necessary. | |
| */ | |
| bool | |
| xfs_fs_writable( | |
| struct xfs_mount *mp, | |
| int level) | |
| { | |
| ASSERT(level > SB_UNFROZEN); | |
| if ((mp->m_super->s_writers.frozen >= level) || | |
| xfs_is_shutdown(mp) || xfs_is_readonly(mp)) | |
| return false; | |
| return true; | |
| } | |
| /* | |
| * Estimate the amount of free space that is not available to userspace and is | |
| * not explicitly reserved from the incore fdblocks. This includes: | |
| * | |
| * - The minimum number of blocks needed to support splitting a bmap btree | |
| * - The blocks currently in use by the freespace btrees because they record | |
| * the actual blocks that will fill per-AG metadata space reservations | |
| */ | |
| uint64_t | |
| xfs_freecounter_unavailable( | |
| struct xfs_mount *mp, | |
| enum xfs_free_counter ctr) | |
| { | |
| if (ctr != XC_FREE_BLOCKS) | |
| return 0; | |
| return mp->m_alloc_set_aside + atomic64_read(&mp->m_allocbt_blks); | |
| } | |
| void | |
| xfs_add_freecounter( | |
| struct xfs_mount *mp, | |
| enum xfs_free_counter ctr, | |
| uint64_t delta) | |
| { | |
| struct xfs_freecounter *counter = &mp->m_free[ctr]; | |
| uint64_t res_used; | |
| /* | |
| * If the reserve pool is depleted, put blocks back into it first. | |
| * Most of the time the pool is full. | |
| */ | |
| if (likely(counter->res_avail == counter->res_total)) { | |
| percpu_counter_add(&counter->count, delta); | |
| return; | |
| } | |
| spin_lock(&mp->m_sb_lock); | |
| res_used = counter->res_total - counter->res_avail; | |
| if (res_used > delta) { | |
| counter->res_avail += delta; | |
| } else { | |
| delta -= res_used; | |
| counter->res_avail = counter->res_total; | |
| percpu_counter_add(&counter->count, delta); | |
| } | |
| spin_unlock(&mp->m_sb_lock); | |
| } | |
| /* Adjust in-core free blocks or RT extents. */ | |
| int | |
| xfs_dec_freecounter( | |
| struct xfs_mount *mp, | |
| enum xfs_free_counter ctr, | |
| uint64_t delta, | |
| bool rsvd) | |
| { | |
| struct xfs_freecounter *counter = &mp->m_free[ctr]; | |
| s32 batch; | |
| ASSERT(ctr < XC_FREE_NR); | |
| /* | |
| * Taking blocks away, need to be more accurate the closer we | |
| * are to zero. | |
| * | |
| * If the counter has a value of less than 2 * max batch size, | |
| * then make everything serialise as we are real close to | |
| * ENOSPC. | |
| */ | |
| if (__percpu_counter_compare(&counter->count, 2 * XFS_FDBLOCKS_BATCH, | |
| XFS_FDBLOCKS_BATCH) < 0) | |
| batch = 1; | |
| else | |
| batch = XFS_FDBLOCKS_BATCH; | |
| /* | |
| * Set aside allocbt blocks because these blocks are tracked as free | |
| * space but not available for allocation. Technically this means that a | |
| * single reservation cannot consume all remaining free space, but the | |
| * ratio of allocbt blocks to usable free blocks should be rather small. | |
| * The tradeoff without this is that filesystems that maintain high | |
| * perag block reservations can over reserve physical block availability | |
| * and fail physical allocation, which leads to much more serious | |
| * problems (i.e. transaction abort, pagecache discards, etc.) than | |
| * slightly premature -ENOSPC. | |
| */ | |
| percpu_counter_add_batch(&counter->count, -((int64_t)delta), batch); | |
| if (__percpu_counter_compare(&counter->count, | |
| xfs_freecounter_unavailable(mp, ctr), | |
| XFS_FDBLOCKS_BATCH) < 0) { | |
| /* | |
| * Lock up the sb for dipping into reserves before releasing the | |
| * space that took us to ENOSPC. | |
| */ | |
| spin_lock(&mp->m_sb_lock); | |
| percpu_counter_add(&counter->count, delta); | |
| if (!rsvd) | |
| goto fdblocks_enospc; | |
| if (delta > counter->res_avail) { | |
| if (ctr == XC_FREE_BLOCKS) | |
| xfs_warn_once(mp, | |
| "Reserve blocks depleted! Consider increasing reserve pool size."); | |
| goto fdblocks_enospc; | |
| } | |
| counter->res_avail -= delta; | |
| trace_xfs_freecounter_reserved(mp, ctr, delta, _RET_IP_); | |
| spin_unlock(&mp->m_sb_lock); | |
| } | |
| /* we had space! */ | |
| return 0; | |
| fdblocks_enospc: | |
| trace_xfs_freecounter_enospc(mp, ctr, delta, _RET_IP_); | |
| spin_unlock(&mp->m_sb_lock); | |
| return -ENOSPC; | |
| } | |
| /* | |
| * Used to free the superblock along various error paths. | |
| */ | |
| void | |
| xfs_freesb( | |
| struct xfs_mount *mp) | |
| { | |
| struct xfs_buf *bp = mp->m_sb_bp; | |
| xfs_buf_lock(bp); | |
| mp->m_sb_bp = NULL; | |
| xfs_buf_relse(bp); | |
| } | |
| /* | |
| * If the underlying (data/log/rt) device is readonly, there are some | |
| * operations that cannot proceed. | |
| */ | |
| int | |
| xfs_dev_is_read_only( | |
| struct xfs_mount *mp, | |
| char *message) | |
| { | |
| if (xfs_readonly_buftarg(mp->m_ddev_targp) || | |
| xfs_readonly_buftarg(mp->m_logdev_targp) || | |
| (mp->m_rtdev_targp && xfs_readonly_buftarg(mp->m_rtdev_targp))) { | |
| xfs_notice(mp, "%s required on read-only device.", message); | |
| xfs_notice(mp, "write access unavailable, cannot proceed."); | |
| return -EROFS; | |
| } | |
| return 0; | |
| } | |
| /* Force the summary counters to be recalculated at next mount. */ | |
| void | |
| xfs_force_summary_recalc( | |
| struct xfs_mount *mp) | |
| { | |
| if (!xfs_has_lazysbcount(mp)) | |
| return; | |
| xfs_fs_mark_sick(mp, XFS_SICK_FS_COUNTERS); | |
| } | |
| /* | |
| * Enable a log incompat feature flag in the primary superblock. The caller | |
| * cannot have any other transactions in progress. | |
| */ | |
| int | |
| xfs_add_incompat_log_feature( | |
| struct xfs_mount *mp, | |
| uint32_t feature) | |
| { | |
| struct xfs_dsb *dsb; | |
| int error; | |
| ASSERT(hweight32(feature) == 1); | |
| ASSERT(!(feature & XFS_SB_FEAT_INCOMPAT_LOG_UNKNOWN)); | |
| /* | |
| * Force the log to disk and kick the background AIL thread to reduce | |
| * the chances that the bwrite will stall waiting for the AIL to unpin | |
| * the primary superblock buffer. This isn't a data integrity | |
| * operation, so we don't need a synchronous push. | |
| */ | |
| error = xfs_log_force(mp, XFS_LOG_SYNC); | |
| if (error) | |
| return error; | |
| xfs_ail_push_all(mp->m_ail); | |
| /* | |
| * Lock the primary superblock buffer to serialize all callers that | |
| * are trying to set feature bits. | |
| */ | |
| xfs_buf_lock(mp->m_sb_bp); | |
| xfs_buf_hold(mp->m_sb_bp); | |
| if (xfs_is_shutdown(mp)) { | |
| error = -EIO; | |
| goto rele; | |
| } | |
| if (xfs_sb_has_incompat_log_feature(&mp->m_sb, feature)) | |
| goto rele; | |
| /* | |
| * Write the primary superblock to disk immediately, because we need | |
| * the log_incompat bit to be set in the primary super now to protect | |
| * the log items that we're going to commit later. | |
| */ | |
| dsb = mp->m_sb_bp->b_addr; | |
| xfs_sb_to_disk(dsb, &mp->m_sb); | |
| dsb->sb_features_log_incompat |= cpu_to_be32(feature); | |
| error = xfs_bwrite(mp->m_sb_bp); | |
| if (error) | |
| goto shutdown; | |
| /* | |
| * Add the feature bits to the incore superblock before we unlock the | |
| * buffer. | |
| */ | |
| xfs_sb_add_incompat_log_features(&mp->m_sb, feature); | |
| xfs_buf_relse(mp->m_sb_bp); | |
| /* Log the superblock to disk. */ | |
| return xfs_sync_sb(mp, false); | |
| shutdown: | |
| xfs_force_shutdown(mp, SHUTDOWN_META_IO_ERROR); | |
| rele: | |
| xfs_buf_relse(mp->m_sb_bp); | |
| return error; | |
| } | |
| /* | |
| * Clear all the log incompat flags from the superblock. | |
| * | |
| * The caller cannot be in a transaction, must ensure that the log does not | |
| * contain any log items protected by any log incompat bit, and must ensure | |
| * that there are no other threads that depend on the state of the log incompat | |
| * feature flags in the primary super. | |
| * | |
| * Returns true if the superblock is dirty. | |
| */ | |
| bool | |
| xfs_clear_incompat_log_features( | |
| struct xfs_mount *mp) | |
| { | |
| bool ret = false; | |
| if (!xfs_has_crc(mp) || | |
| !xfs_sb_has_incompat_log_feature(&mp->m_sb, | |
| XFS_SB_FEAT_INCOMPAT_LOG_ALL) || | |
| xfs_is_shutdown(mp) || | |
| !xfs_is_done_with_log_incompat(mp)) | |
| return false; | |
| /* | |
| * Update the incore superblock. We synchronize on the primary super | |
| * buffer lock to be consistent with the add function, though at least | |
| * in theory this shouldn't be necessary. | |
| */ | |
| xfs_buf_lock(mp->m_sb_bp); | |
| xfs_buf_hold(mp->m_sb_bp); | |
| if (xfs_sb_has_incompat_log_feature(&mp->m_sb, | |
| XFS_SB_FEAT_INCOMPAT_LOG_ALL)) { | |
| xfs_sb_remove_incompat_log_features(&mp->m_sb); | |
| ret = true; | |
| } | |
| xfs_buf_relse(mp->m_sb_bp); | |
| return ret; | |
| } | |
| /* | |
| * Update the in-core delayed block counter. | |
| * | |
| * We prefer to update the counter without having to take a spinlock for every | |
| * counter update (i.e. batching). Each change to delayed allocation | |
| * reservations can change can easily exceed the default percpu counter | |
| * batching, so we use a larger batch factor here. | |
| * | |
| * Note that we don't currently have any callers requiring fast summation | |
| * (e.g. percpu_counter_read) so we can use a big batch value here. | |
| */ | |
| #define XFS_DELALLOC_BATCH (4096) | |
| void | |
| xfs_mod_delalloc( | |
| struct xfs_inode *ip, | |
| int64_t data_delta, | |
| int64_t ind_delta) | |
| { | |
| struct xfs_mount *mp = ip->i_mount; | |
| if (XFS_IS_REALTIME_INODE(ip)) { | |
| percpu_counter_add_batch(&mp->m_delalloc_rtextents, | |
| xfs_blen_to_rtbxlen(mp, data_delta), | |
| XFS_DELALLOC_BATCH); | |
| if (!ind_delta) | |
| return; | |
| data_delta = 0; | |
| } | |
| percpu_counter_add_batch(&mp->m_delalloc_blks, data_delta + ind_delta, | |
| XFS_DELALLOC_BATCH); | |
| } |