| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (c) 2000-2005 Silicon Graphics, Inc. | |
| * All Rights Reserved. | |
| */ | |
| #include "xfs_platform.h" | |
| #include "xfs_fs.h" | |
| #include "xfs_shared.h" | |
| #include "xfs_format.h" | |
| #include "xfs_log_format.h" | |
| #include "xfs_trans_resv.h" | |
| #include "xfs_mount.h" | |
| #include "xfs_inode.h" | |
| #include "xfs_trans.h" | |
| #include "xfs_inode_item.h" | |
| #include "xfs_bmap.h" | |
| #include "xfs_bmap_util.h" | |
| #include "xfs_dir2.h" | |
| #include "xfs_dir2_priv.h" | |
| #include "xfs_ioctl.h" | |
| #include "xfs_trace.h" | |
| #include "xfs_log.h" | |
| #include "xfs_icache.h" | |
| #include "xfs_pnfs.h" | |
| #include "xfs_iomap.h" | |
| #include "xfs_reflink.h" | |
| #include "xfs_file.h" | |
| #include "xfs_ioend.h" | |
| #include "xfs_zone_alloc.h" | |
| #include "xfs_error.h" | |
| #include "xfs_errortag.h" | |
| #include <linux/dax.h> | |
| #include <linux/falloc.h> | |
| #include <linux/backing-dev.h> | |
| #include <linux/mman.h> | |
| #include <linux/fadvise.h> | |
| #include <linux/mount.h> | |
| #include <linux/filelock.h> | |
| static const struct vm_operations_struct xfs_file_vm_ops; | |
| /* | |
| * Decide if the given file range is aligned to the size of the fundamental | |
| * allocation unit for the file. | |
| */ | |
| bool | |
| xfs_is_falloc_aligned( | |
| struct xfs_inode *ip, | |
| loff_t pos, | |
| long long int len) | |
| { | |
| unsigned int alloc_unit = xfs_inode_alloc_unitsize(ip); | |
| if (!is_power_of_2(alloc_unit)) | |
| return isaligned_64(pos, alloc_unit) && | |
| isaligned_64(len, alloc_unit); | |
| return !((pos | len) & (alloc_unit - 1)); | |
| } | |
| /* | |
| * Fsync operations on directories are much simpler than on regular files, | |
| * as there is no file data to flush, and thus also no need for explicit | |
| * cache flush operations, and there are no non-transaction metadata updates | |
| * on directories either. | |
| */ | |
| STATIC int | |
| xfs_dir_fsync( | |
| struct file *file, | |
| loff_t start, | |
| loff_t end, | |
| int datasync) | |
| { | |
| struct xfs_inode *ip = XFS_I(file->f_mapping->host); | |
| trace_xfs_dir_fsync(ip); | |
| return xfs_log_force_inode(ip); | |
| } | |
| /* | |
| * All metadata updates are logged, which means that we just have to push the | |
| * journal to the required sequence number than holds the updates. We track | |
| * datasync commits separately to full sync commits, and hence only need to | |
| * select the correct sequence number for the log force here. | |
| * | |
| * We don't have to serialise against concurrent modifications, as we do not | |
| * have to wait for modifications that have not yet completed. We define a | |
| * transaction commit as completing when the commit sequence number is updated, | |
| * hence if the sequence number has not updated, the sync operation has been | |
| * run before the commit completed and we don't have to wait for it. | |
| * | |
| * If we have concurrent fsync/fdatasync() calls, the sequence numbers remain | |
| * set on the log item until - at least - the journal flush completes. In | |
| * reality, they are only cleared when the inode is fully unpinned (i.e. | |
| * persistent in the journal and not dirty in the CIL), and so we rely on | |
| * xfs_log_force_seq() either skipping sequences that have been persisted or | |
| * waiting on sequences that are still in flight to correctly order concurrent | |
| * sync operations. | |
| */ | |
| static int | |
| xfs_fsync_flush_log( | |
| struct xfs_inode *ip, | |
| bool datasync, | |
| int *log_flushed) | |
| { | |
| struct xfs_inode_log_item *iip = ip->i_itemp; | |
| xfs_csn_t seq = 0; | |
| spin_lock(&iip->ili_lock); | |
| if (datasync) | |
| seq = iip->ili_datasync_seq; | |
| else | |
| seq = iip->ili_commit_seq; | |
| spin_unlock(&iip->ili_lock); | |
| if (!seq) | |
| return 0; | |
| return xfs_log_force_seq(ip->i_mount, seq, XFS_LOG_SYNC, | |
| log_flushed); | |
| } | |
| STATIC int | |
| xfs_file_fsync( | |
| struct file *file, | |
| loff_t start, | |
| loff_t end, | |
| int datasync) | |
| { | |
| struct xfs_inode *ip = XFS_I(file->f_mapping->host); | |
| int log_flushed = 0; | |
| int error; | |
| trace_xfs_file_fsync(ip); | |
| error = file_write_and_wait_range(file, start, end); | |
| if (error) | |
| return error; | |
| if (xfs_is_shutdown(ip->i_mount)) | |
| return -EIO; | |
| xfs_iflags_clear(ip, XFS_ITRUNCATED); | |
| /* | |
| * If the inode has a log item attached, we must force the log up to the | |
| * last LSN in which the inode was modified to ensure all metadata is | |
| * persisted. The log force will flush the caches for all devices | |
| * before writing the log records unless it is a no-op because there are | |
| * no modifications to this inode that need to be pushed out. | |
| */ | |
| if (ip->i_itemp) { | |
| error = xfs_fsync_flush_log(ip, datasync, &log_flushed); | |
| if (error) | |
| return error; | |
| } | |
| /* | |
| * If the log force was a no-op, we may still need to flush the | |
| * file data target cache here. This can happen for fdatasync/O_DSYNC | |
| * when no metadata needed to be committed. | |
| * | |
| * Use the inode's actual file data target rather than assuming the | |
| * main data device. | |
| */ | |
| if (!log_flushed) | |
| return blkdev_issue_flush(xfs_inode_buftarg(ip)->bt_bdev); | |
| return 0; | |
| } | |
| static int | |
| xfs_ilock_iocb( | |
| struct kiocb *iocb, | |
| unsigned int lock_mode) | |
| { | |
| struct xfs_inode *ip = XFS_I(file_inode(iocb->ki_filp)); | |
| if (iocb->ki_flags & IOCB_NOWAIT) { | |
| if (!xfs_ilock_nowait(ip, lock_mode)) | |
| return -EAGAIN; | |
| } else { | |
| xfs_ilock(ip, lock_mode); | |
| } | |
| return 0; | |
| } | |
| static int | |
| xfs_ilock_iocb_for_write( | |
| struct kiocb *iocb, | |
| unsigned int *lock_mode) | |
| { | |
| ssize_t ret; | |
| struct xfs_inode *ip = XFS_I(file_inode(iocb->ki_filp)); | |
| ret = xfs_ilock_iocb(iocb, *lock_mode); | |
| if (ret) | |
| return ret; | |
| /* | |
| * If a reflink remap is in progress we always need to take the iolock | |
| * exclusively to wait for it to finish. | |
| */ | |
| if (*lock_mode == XFS_IOLOCK_SHARED && | |
| xfs_iflags_test(ip, XFS_IREMAPPING)) { | |
| xfs_iunlock(ip, *lock_mode); | |
| *lock_mode = XFS_IOLOCK_EXCL; | |
| return xfs_ilock_iocb(iocb, *lock_mode); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Bounce buffering dio reads need a user context to copy back the data. | |
| * Use an ioend to provide that. | |
| */ | |
| static void | |
| xfs_dio_read_bounce_submit_io( | |
| const struct iomap_iter *iter, | |
| struct bio *bio, | |
| loff_t file_offset) | |
| { | |
| iomap_init_ioend(iter->inode, bio, file_offset, IOMAP_IOEND_DIRECT); | |
| bio->bi_end_io = xfs_end_bio; | |
| submit_bio(bio); | |
| } | |
| static const struct iomap_dio_ops xfs_dio_read_bounce_ops = { | |
| .submit_io = xfs_dio_read_bounce_submit_io, | |
| .bio_set = &iomap_ioend_bioset, | |
| }; | |
| STATIC ssize_t | |
| xfs_file_dio_read( | |
| struct kiocb *iocb, | |
| struct iov_iter *to) | |
| { | |
| struct xfs_inode *ip = XFS_I(file_inode(iocb->ki_filp)); | |
| ssize_t ret; | |
| trace_xfs_file_direct_read(iocb, to); | |
| if (!iov_iter_count(to)) | |
| return 0; /* skip atime */ | |
| file_accessed(iocb->ki_filp); | |
| ret = xfs_ilock_iocb(iocb, XFS_IOLOCK_SHARED); | |
| if (ret) | |
| return ret; | |
| if (mapping_stable_writes(iocb->ki_filp->f_mapping)) { | |
| ret = iomap_dio_rw(iocb, to, &xfs_read_iomap_ops, | |
| &xfs_dio_read_bounce_ops, IOMAP_DIO_BOUNCE, | |
| NULL, 0); | |
| } else { | |
| ret = iomap_dio_read_simple(iocb, to, xfs_read_iomap_begin); | |
| if (ret == -ENOTBLK) | |
| ret = iomap_dio_rw(iocb, to, &xfs_read_iomap_ops, NULL, | |
| 0, NULL, 0); | |
| } | |
| xfs_iunlock(ip, XFS_IOLOCK_SHARED); | |
| return ret; | |
| } | |
| static noinline ssize_t | |
| xfs_file_dax_read( | |
| struct kiocb *iocb, | |
| struct iov_iter *to) | |
| { | |
| struct xfs_inode *ip = XFS_I(iocb->ki_filp->f_mapping->host); | |
| ssize_t ret = 0; | |
| trace_xfs_file_dax_read(iocb, to); | |
| if (!iov_iter_count(to)) | |
| return 0; /* skip atime */ | |
| ret = xfs_ilock_iocb(iocb, XFS_IOLOCK_SHARED); | |
| if (ret) | |
| return ret; | |
| ret = dax_iomap_rw(iocb, to, &xfs_read_iomap_ops); | |
| xfs_iunlock(ip, XFS_IOLOCK_SHARED); | |
| file_accessed(iocb->ki_filp); | |
| return ret; | |
| } | |
| STATIC ssize_t | |
| xfs_file_buffered_read( | |
| struct kiocb *iocb, | |
| struct iov_iter *to) | |
| { | |
| struct xfs_inode *ip = XFS_I(file_inode(iocb->ki_filp)); | |
| ssize_t ret; | |
| trace_xfs_file_buffered_read(iocb, to); | |
| ret = xfs_ilock_iocb(iocb, XFS_IOLOCK_SHARED); | |
| if (ret) | |
| return ret; | |
| ret = generic_file_read_iter(iocb, to); | |
| xfs_iunlock(ip, XFS_IOLOCK_SHARED); | |
| return ret; | |
| } | |
| STATIC ssize_t | |
| xfs_file_read_iter( | |
| struct kiocb *iocb, | |
| struct iov_iter *to) | |
| { | |
| struct inode *inode = file_inode(iocb->ki_filp); | |
| struct xfs_mount *mp = XFS_I(inode)->i_mount; | |
| ssize_t ret = 0; | |
| XFS_STATS_INC(mp, xs_read_calls); | |
| if (xfs_is_shutdown(mp)) | |
| return -EIO; | |
| if (IS_DAX(inode)) | |
| ret = xfs_file_dax_read(iocb, to); | |
| else if (iocb->ki_flags & IOCB_DIRECT) | |
| ret = xfs_file_dio_read(iocb, to); | |
| else | |
| ret = xfs_file_buffered_read(iocb, to); | |
| if (ret > 0) | |
| XFS_STATS_ADD(mp, xs_read_bytes, ret); | |
| return ret; | |
| } | |
| STATIC ssize_t | |
| xfs_file_splice_read( | |
| struct file *in, | |
| loff_t *ppos, | |
| struct pipe_inode_info *pipe, | |
| size_t len, | |
| unsigned int flags) | |
| { | |
| struct inode *inode = file_inode(in); | |
| struct xfs_inode *ip = XFS_I(inode); | |
| struct xfs_mount *mp = ip->i_mount; | |
| ssize_t ret = 0; | |
| XFS_STATS_INC(mp, xs_read_calls); | |
| if (xfs_is_shutdown(mp)) | |
| return -EIO; | |
| trace_xfs_file_splice_read(ip, *ppos, len); | |
| xfs_ilock(ip, XFS_IOLOCK_SHARED); | |
| ret = filemap_splice_read(in, ppos, pipe, len, flags); | |
| xfs_iunlock(ip, XFS_IOLOCK_SHARED); | |
| if (ret > 0) | |
| XFS_STATS_ADD(mp, xs_read_bytes, ret); | |
| return ret; | |
| } | |
| /* | |
| * Take care of zeroing post-EOF blocks when they might exist. | |
| * | |
| * Returns 0 if successfully, a negative error for a failure, or 1 if this | |
| * function dropped the iolock and reacquired it exclusively and the caller | |
| * needs to restart the write sanity checks. | |
| */ | |
| static ssize_t | |
| xfs_file_write_zero_eof( | |
| struct kiocb *iocb, | |
| struct iov_iter *from, | |
| unsigned int *iolock, | |
| size_t count, | |
| bool *drained_dio, | |
| struct xfs_zone_alloc_ctx *ac) | |
| { | |
| struct xfs_inode *ip = XFS_I(iocb->ki_filp->f_mapping->host); | |
| loff_t isize; | |
| int error; | |
| /* | |
| * We need to serialise against EOF updates that occur in IO completions | |
| * here. We want to make sure that nobody is changing the size while | |
| * we do this check until we have placed an IO barrier (i.e. hold | |
| * XFS_IOLOCK_EXCL) that prevents new IO from being dispatched. The | |
| * spinlock effectively forms a memory barrier once we have | |
| * XFS_IOLOCK_EXCL so we are guaranteed to see the latest EOF value and | |
| * hence be able to correctly determine if we need to run zeroing. | |
| */ | |
| spin_lock(&ip->i_flags_lock); | |
| isize = i_size_read(VFS_I(ip)); | |
| if (iocb->ki_pos <= isize) { | |
| spin_unlock(&ip->i_flags_lock); | |
| return 0; | |
| } | |
| spin_unlock(&ip->i_flags_lock); | |
| if (iocb->ki_flags & IOCB_NOWAIT) | |
| return -EAGAIN; | |
| if (!*drained_dio) { | |
| /* | |
| * If zeroing is needed and we are currently holding the iolock | |
| * shared, we need to update it to exclusive which implies | |
| * having to redo all checks before. | |
| */ | |
| if (*iolock == XFS_IOLOCK_SHARED) { | |
| xfs_iunlock(ip, *iolock); | |
| *iolock = XFS_IOLOCK_EXCL; | |
| xfs_ilock(ip, *iolock); | |
| iov_iter_reexpand(from, count); | |
| } | |
| /* | |
| * We now have an IO submission barrier in place, but AIO can do | |
| * EOF updates during IO completion and hence we now need to | |
| * wait for all of them to drain. Non-AIO DIO will have drained | |
| * before we are given the XFS_IOLOCK_EXCL, and so for most | |
| * cases this wait is a no-op. | |
| */ | |
| inode_dio_wait(VFS_I(ip)); | |
| *drained_dio = true; | |
| return 1; | |
| } | |
| trace_xfs_zero_eof(ip, isize, iocb->ki_pos - isize); | |
| xfs_ilock(ip, XFS_MMAPLOCK_EXCL); | |
| error = xfs_zero_range(ip, isize, iocb->ki_pos - isize, ac, NULL); | |
| xfs_iunlock(ip, XFS_MMAPLOCK_EXCL); | |
| return error; | |
| } | |
| /* | |
| * Common pre-write limit and setup checks. | |
| * | |
| * Called with the iolock held either shared and exclusive according to | |
| * @iolock, and returns with it held. Might upgrade the iolock to exclusive | |
| * if called for a direct write beyond i_size. | |
| */ | |
| STATIC ssize_t | |
| xfs_file_write_checks( | |
| struct kiocb *iocb, | |
| struct iov_iter *from, | |
| unsigned int *iolock, | |
| struct xfs_zone_alloc_ctx *ac) | |
| { | |
| struct inode *inode = iocb->ki_filp->f_mapping->host; | |
| size_t count = iov_iter_count(from); | |
| bool drained_dio = false; | |
| ssize_t error; | |
| restart: | |
| error = generic_write_checks(iocb, from); | |
| if (error <= 0) | |
| return error; | |
| if (iocb->ki_flags & IOCB_NOWAIT) { | |
| error = break_layout(inode, false); | |
| if (error == -EWOULDBLOCK) | |
| error = -EAGAIN; | |
| } else { | |
| error = xfs_break_layouts(inode, iolock, BREAK_WRITE); | |
| } | |
| if (error) | |
| return error; | |
| /* | |
| * For changing security info in file_remove_privs() we need i_rwsem | |
| * exclusively. | |
| */ | |
| if (*iolock == XFS_IOLOCK_SHARED && !IS_NOSEC(inode)) { | |
| xfs_iunlock(XFS_I(inode), *iolock); | |
| *iolock = XFS_IOLOCK_EXCL; | |
| error = xfs_ilock_iocb(iocb, *iolock); | |
| if (error) { | |
| *iolock = 0; | |
| return error; | |
| } | |
| goto restart; | |
| } | |
| /* | |
| * If the offset is beyond the size of the file, we need to zero all | |
| * blocks that fall between the existing EOF and the start of this | |
| * write. | |
| * | |
| * We can do an unlocked check for i_size here safely as I/O completion | |
| * can only extend EOF. Truncate is locked out at this point, so the | |
| * EOF can not move backwards, only forwards. Hence we only need to take | |
| * the slow path when we are at or beyond the current EOF. | |
| */ | |
| if (iocb->ki_pos > i_size_read(inode)) { | |
| error = xfs_file_write_zero_eof(iocb, from, iolock, count, | |
| &drained_dio, ac); | |
| if (error == 1) | |
| goto restart; | |
| if (error) | |
| return error; | |
| } | |
| return kiocb_modified(iocb); | |
| } | |
| static ssize_t | |
| xfs_zoned_write_space_reserve( | |
| struct xfs_mount *mp, | |
| struct kiocb *iocb, | |
| struct iov_iter *from, | |
| unsigned int flags, | |
| struct xfs_zone_alloc_ctx *ac) | |
| { | |
| loff_t count = iov_iter_count(from); | |
| int error; | |
| if (iocb->ki_flags & IOCB_NOWAIT) | |
| flags |= XFS_ZR_NOWAIT; | |
| /* | |
| * Check the rlimit and LFS boundary first so that we don't over-reserve | |
| * by possibly a lot. | |
| * | |
| * The generic write path will redo this check later, and it might have | |
| * changed by then. If it got expanded we'll stick to our earlier | |
| * smaller limit, and if it is decreased the new smaller limit will be | |
| * used and our extra space reservation will be returned after finishing | |
| * the write. | |
| */ | |
| error = generic_write_check_limits(iocb->ki_filp, iocb->ki_pos, &count); | |
| if (error) | |
| return error; | |
| /* | |
| * Sloppily round up count to file system blocks. | |
| * | |
| * This will often reserve an extra block, but that avoids having to look | |
| * at the start offset, which isn't stable for O_APPEND until taking the | |
| * iolock. Also we need to reserve a block each for zeroing the old | |
| * EOF block and the new start block if they are unaligned. | |
| * | |
| * Any remaining block will be returned after the write. | |
| */ | |
| return xfs_zoned_space_reserve(mp, XFS_B_TO_FSB(mp, count) + 1 + 2, | |
| flags, ac); | |
| } | |
| /* | |
| * We need to lock the test/set EOF update as we can be racing with | |
| * other IO completions here to update the EOF. Failing to serialise | |
| * here can result in EOF moving backwards and Bad Things Happen when | |
| * that occurs. | |
| * | |
| * As IO completion only ever extends EOF, we can do an unlocked check | |
| * here to avoid taking the spinlock. If we land within the current EOF, | |
| * then we do not need to do an extending update at all, and we don't | |
| * need to take the lock to check this. If we race with an update moving | |
| * EOF, then we'll either still be beyond EOF and need to take the lock, | |
| * or we'll be within EOF and we don't need to take it at all. | |
| */ | |
| static int | |
| xfs_dio_endio_set_isize( | |
| struct inode *inode, | |
| loff_t offset, | |
| ssize_t size) | |
| { | |
| struct xfs_inode *ip = XFS_I(inode); | |
| if (offset + size <= i_size_read(inode)) | |
| return 0; | |
| spin_lock(&ip->i_flags_lock); | |
| if (offset + size <= i_size_read(inode)) { | |
| spin_unlock(&ip->i_flags_lock); | |
| return 0; | |
| } | |
| i_size_write(inode, offset + size); | |
| spin_unlock(&ip->i_flags_lock); | |
| return xfs_setfilesize(ip, offset, size); | |
| } | |
| static int | |
| xfs_zoned_dio_write_end_io( | |
| struct kiocb *iocb, | |
| ssize_t size, | |
| int error, | |
| unsigned flags) | |
| { | |
| struct inode *inode = file_inode(iocb->ki_filp); | |
| struct xfs_inode *ip = XFS_I(inode); | |
| unsigned int nofs_flag; | |
| ASSERT(!(flags & (IOMAP_DIO_UNWRITTEN | IOMAP_DIO_COW))); | |
| trace_xfs_end_io_direct_write(ip, iocb->ki_pos, size); | |
| if (xfs_is_shutdown(ip->i_mount)) | |
| return -EIO; | |
| if (error || !size) | |
| return error; | |
| XFS_STATS_ADD(ip->i_mount, xs_write_bytes, size); | |
| nofs_flag = memalloc_nofs_save(); | |
| error = xfs_dio_endio_set_isize(inode, iocb->ki_pos, size); | |
| memalloc_nofs_restore(nofs_flag); | |
| return error; | |
| } | |
| static int | |
| xfs_dio_write_end_io( | |
| struct kiocb *iocb, | |
| ssize_t size, | |
| int error, | |
| unsigned flags) | |
| { | |
| struct inode *inode = file_inode(iocb->ki_filp); | |
| struct xfs_inode *ip = XFS_I(inode); | |
| loff_t offset = iocb->ki_pos; | |
| unsigned int nofs_flag; | |
| ASSERT(!xfs_is_zoned_inode(ip)); | |
| trace_xfs_end_io_direct_write(ip, offset, size); | |
| if (xfs_is_shutdown(ip->i_mount)) | |
| return -EIO; | |
| if (error) | |
| return error; | |
| if (!size) | |
| return 0; | |
| /* | |
| * Capture amount written on completion as we can't reliably account | |
| * for it on submission. | |
| */ | |
| XFS_STATS_ADD(ip->i_mount, xs_write_bytes, size); | |
| /* | |
| * We can allocate memory here while doing writeback on behalf of | |
| * memory reclaim. To avoid memory allocation deadlocks set the | |
| * task-wide nofs context for the following operations. | |
| */ | |
| nofs_flag = memalloc_nofs_save(); | |
| if (flags & IOMAP_DIO_COW) { | |
| if (iocb->ki_flags & IOCB_ATOMIC) | |
| error = xfs_reflink_end_atomic_cow(ip, offset, size); | |
| else | |
| error = xfs_reflink_end_cow(ip, offset, size); | |
| if (error) | |
| goto out; | |
| } | |
| /* | |
| * Unwritten conversion updates the in-core isize after extent | |
| * conversion but before updating the on-disk size. Updating isize any | |
| * earlier allows a racing dio read to find unwritten extents before | |
| * they are converted. | |
| */ | |
| if (flags & IOMAP_DIO_UNWRITTEN) { | |
| error = xfs_iomap_write_unwritten(ip, offset, size, true, 0); | |
| goto out; | |
| } | |
| /* | |
| * We need to update the in-core inode size here so that we don't end up | |
| * with the on-disk inode size being outside the in-core inode size. We | |
| * have no other method of updating EOF for AIO, so always do it here | |
| * if necessary. | |
| */ | |
| error = xfs_dio_endio_set_isize(inode, offset, size); | |
| out: | |
| memalloc_nofs_restore(nofs_flag); | |
| return error; | |
| } | |
| static const struct iomap_dio_ops xfs_dio_write_ops = { | |
| .end_io = xfs_dio_write_end_io, | |
| }; | |
| static void | |
| xfs_dio_zoned_submit_io( | |
| const struct iomap_iter *iter, | |
| struct bio *bio, | |
| loff_t file_offset) | |
| { | |
| struct xfs_mount *mp = XFS_I(iter->inode)->i_mount; | |
| struct xfs_zone_alloc_ctx *ac = iter->private; | |
| xfs_filblks_t count_fsb; | |
| struct iomap_ioend *ioend; | |
| count_fsb = XFS_B_TO_FSB(mp, bio->bi_iter.bi_size); | |
| if (count_fsb > ac->reserved_blocks) { | |
| xfs_err(mp, | |
| "allocation (%lld) larger than reservation (%lld).", | |
| count_fsb, ac->reserved_blocks); | |
| xfs_force_shutdown(mp, SHUTDOWN_CORRUPT_INCORE); | |
| bio_io_error(bio); | |
| return; | |
| } | |
| ac->reserved_blocks -= count_fsb; | |
| bio->bi_end_io = xfs_end_bio; | |
| ioend = iomap_init_ioend(iter->inode, bio, file_offset, | |
| IOMAP_IOEND_DIRECT); | |
| xfs_zone_alloc_and_submit(ioend, &ac->open_zone); | |
| } | |
| static const struct iomap_dio_ops xfs_dio_zoned_write_ops = { | |
| .bio_set = &iomap_ioend_bioset, | |
| .submit_io = xfs_dio_zoned_submit_io, | |
| .end_io = xfs_zoned_dio_write_end_io, | |
| }; | |
| /* | |
| * Handle block aligned direct I/O writes. | |
| */ | |
| static noinline ssize_t | |
| xfs_file_dio_write_aligned( | |
| struct xfs_inode *ip, | |
| struct kiocb *iocb, | |
| struct iov_iter *from, | |
| const struct iomap_ops *ops, | |
| const struct iomap_dio_ops *dops, | |
| struct xfs_zone_alloc_ctx *ac) | |
| { | |
| unsigned int iolock = XFS_IOLOCK_SHARED; | |
| unsigned int dio_flags = 0; | |
| ssize_t ret; | |
| /* | |
| * For always COW inodes, each bio must be aligned to the file system | |
| * block size and not just the device sector size because we need to | |
| * allocate a block-aligned amount of space for each write. | |
| */ | |
| if (xfs_is_always_cow_inode(ip)) | |
| dio_flags |= IOMAP_DIO_FSBLOCK_ALIGNED; | |
| ret = xfs_ilock_iocb_for_write(iocb, &iolock); | |
| if (ret) | |
| return ret; | |
| ret = xfs_file_write_checks(iocb, from, &iolock, ac); | |
| if (ret) | |
| goto out_unlock; | |
| /* | |
| * We don't need to hold the IOLOCK exclusively across the IO, so demote | |
| * the iolock back to shared if we had to take the exclusive lock in | |
| * xfs_file_write_checks() for other reasons. | |
| */ | |
| if (iolock == XFS_IOLOCK_EXCL) { | |
| xfs_ilock_demote(ip, XFS_IOLOCK_EXCL); | |
| iolock = XFS_IOLOCK_SHARED; | |
| } | |
| if (mapping_stable_writes(iocb->ki_filp->f_mapping)) | |
| dio_flags |= IOMAP_DIO_BOUNCE; | |
| trace_xfs_file_direct_write(iocb, from); | |
| ret = iomap_dio_rw(iocb, from, ops, dops, dio_flags, ac, 0); | |
| out_unlock: | |
| xfs_iunlock(ip, iolock); | |
| return ret; | |
| } | |
| /* | |
| * Handle block aligned direct I/O writes to zoned devices. | |
| */ | |
| static noinline ssize_t | |
| xfs_file_dio_write_zoned( | |
| struct xfs_inode *ip, | |
| struct kiocb *iocb, | |
| struct iov_iter *from) | |
| { | |
| struct xfs_zone_alloc_ctx ac = { }; | |
| ssize_t ret; | |
| ret = xfs_zoned_write_space_reserve(ip->i_mount, iocb, from, 0, &ac); | |
| if (ret < 0) | |
| return ret; | |
| ret = xfs_file_dio_write_aligned(ip, iocb, from, | |
| &xfs_zoned_direct_write_iomap_ops, | |
| &xfs_dio_zoned_write_ops, &ac); | |
| xfs_zoned_space_unreserve(ip->i_mount, &ac); | |
| return ret; | |
| } | |
| /* | |
| * Handle block atomic writes | |
| * | |
| * Two methods of atomic writes are supported: | |
| * - REQ_ATOMIC-based, which would typically use some form of HW offload in the | |
| * disk | |
| * - COW-based, which uses a COW fork as a staging extent for data updates | |
| * before atomically updating extent mappings for the range being written | |
| * | |
| */ | |
| static noinline ssize_t | |
| xfs_file_dio_write_atomic( | |
| struct xfs_inode *ip, | |
| struct kiocb *iocb, | |
| struct iov_iter *from) | |
| { | |
| unsigned int iolock = XFS_IOLOCK_SHARED; | |
| ssize_t ret, ocount = iov_iter_count(from); | |
| unsigned int dio_flags = 0; | |
| const struct iomap_ops *dops; | |
| /* | |
| * HW offload should be faster, so try that first if it is already | |
| * known that the write length is not too large. | |
| */ | |
| if (ocount > xfs_inode_buftarg(ip)->bt_awu_max) | |
| dops = &xfs_atomic_write_cow_iomap_ops; | |
| else | |
| dops = &xfs_direct_write_iomap_ops; | |
| retry: | |
| ret = xfs_ilock_iocb_for_write(iocb, &iolock); | |
| if (ret) | |
| return ret; | |
| ret = xfs_file_write_checks(iocb, from, &iolock, NULL); | |
| if (ret) | |
| goto out_unlock; | |
| /* Demote similar to xfs_file_dio_write_aligned() */ | |
| if (iolock == XFS_IOLOCK_EXCL) { | |
| xfs_ilock_demote(ip, XFS_IOLOCK_EXCL); | |
| iolock = XFS_IOLOCK_SHARED; | |
| } | |
| trace_xfs_file_direct_write(iocb, from); | |
| if (mapping_stable_writes(iocb->ki_filp->f_mapping)) | |
| dio_flags |= IOMAP_DIO_BOUNCE; | |
| ret = iomap_dio_rw(iocb, from, dops, &xfs_dio_write_ops, dio_flags, | |
| NULL, 0); | |
| /* | |
| * The retry mechanism is based on the ->iomap_next method returning | |
| * -ENOPROTOOPT, which would be when the REQ_ATOMIC-based write is not | |
| * possible. The REQ_ATOMIC-based method is typically not possible if | |
| * the write spans multiple extents or the disk blocks are misaligned. | |
| */ | |
| if (ret == -ENOPROTOOPT && dops == &xfs_direct_write_iomap_ops) { | |
| xfs_iunlock(ip, iolock); | |
| dops = &xfs_atomic_write_cow_iomap_ops; | |
| goto retry; | |
| } | |
| out_unlock: | |
| if (iolock) | |
| xfs_iunlock(ip, iolock); | |
| return ret; | |
| } | |
| /* | |
| * Handle block unaligned direct I/O writes | |
| * | |
| * In most cases direct I/O writes will be done holding IOLOCK_SHARED, allowing | |
| * them to be done in parallel with reads and other direct I/O writes. However, | |
| * if the I/O is not aligned to filesystem blocks, the direct I/O layer may need | |
| * to do sub-block zeroing and that requires serialisation against other direct | |
| * I/O to the same block. In this case we need to serialise the submission of | |
| * the unaligned I/O so that we don't get racing block zeroing in the dio layer. | |
| * In the case where sub-block zeroing is not required, we can do concurrent | |
| * sub-block dios to the same block successfully. | |
| * | |
| * Optimistically submit the I/O using the shared lock first, but use the | |
| * IOMAP_DIO_OVERWRITE_ONLY flag to tell the lower layers to return -EAGAIN | |
| * if block allocation or partial block zeroing would be required. In that case | |
| * we try again with the exclusive lock. | |
| */ | |
| static noinline ssize_t | |
| xfs_file_dio_write_unaligned( | |
| struct xfs_inode *ip, | |
| struct kiocb *iocb, | |
| struct iov_iter *from) | |
| { | |
| size_t isize = i_size_read(VFS_I(ip)); | |
| size_t count = iov_iter_count(from); | |
| unsigned int iolock = XFS_IOLOCK_SHARED; | |
| unsigned int flags = IOMAP_DIO_OVERWRITE_ONLY; | |
| ssize_t ret; | |
| /* | |
| * Extending writes need exclusivity because of the sub-block zeroing | |
| * that the DIO code always does for partial tail blocks beyond EOF, so | |
| * don't even bother trying the fast path in this case. | |
| */ | |
| if (iocb->ki_pos > isize || iocb->ki_pos + count >= isize) { | |
| if (iocb->ki_flags & IOCB_NOWAIT) | |
| return -EAGAIN; | |
| retry_exclusive: | |
| iolock = XFS_IOLOCK_EXCL; | |
| flags = IOMAP_DIO_FORCE_WAIT; | |
| } | |
| ret = xfs_ilock_iocb_for_write(iocb, &iolock); | |
| if (ret) | |
| return ret; | |
| /* | |
| * We can't properly handle unaligned direct I/O to reflink files yet, | |
| * as we can't unshare a partial block. | |
| */ | |
| if (xfs_is_cow_inode(ip)) { | |
| trace_xfs_reflink_bounce_dio_write(iocb, from); | |
| ret = -ENOTBLK; | |
| goto out_unlock; | |
| } | |
| ret = xfs_file_write_checks(iocb, from, &iolock, NULL); | |
| if (ret) | |
| goto out_unlock; | |
| /* | |
| * If we are doing exclusive unaligned I/O, this must be the only I/O | |
| * in-flight. Otherwise we risk data corruption due to unwritten extent | |
| * conversions from the AIO end_io handler. Wait for all other I/O to | |
| * drain first. | |
| */ | |
| if (flags & IOMAP_DIO_FORCE_WAIT) | |
| inode_dio_wait(VFS_I(ip)); | |
| if (mapping_stable_writes(iocb->ki_filp->f_mapping)) | |
| flags |= IOMAP_DIO_BOUNCE; | |
| trace_xfs_file_direct_write(iocb, from); | |
| ret = iomap_dio_rw(iocb, from, &xfs_direct_write_iomap_ops, | |
| &xfs_dio_write_ops, flags, NULL, 0); | |
| /* | |
| * Retry unaligned I/O with exclusive blocking semantics if the DIO | |
| * layer rejected it for mapping or locking reasons. If we are doing | |
| * nonblocking user I/O, propagate the error. | |
| */ | |
| if (ret == -EAGAIN && !(iocb->ki_flags & IOCB_NOWAIT)) { | |
| ASSERT(flags & IOMAP_DIO_OVERWRITE_ONLY); | |
| xfs_iunlock(ip, iolock); | |
| goto retry_exclusive; | |
| } | |
| out_unlock: | |
| if (iolock) | |
| xfs_iunlock(ip, iolock); | |
| return ret; | |
| } | |
| static ssize_t | |
| xfs_file_dio_write( | |
| struct kiocb *iocb, | |
| struct iov_iter *from) | |
| { | |
| struct xfs_inode *ip = XFS_I(file_inode(iocb->ki_filp)); | |
| struct xfs_buftarg *target = xfs_inode_buftarg(ip); | |
| size_t count = iov_iter_count(from); | |
| /* direct I/O must be aligned to device logical sector size */ | |
| if ((iocb->ki_pos | count) & target->bt_logical_sectormask) | |
| return -EINVAL; | |
| if ((iocb->ki_pos | count) & ip->i_mount->m_blockmask) | |
| return xfs_file_dio_write_unaligned(ip, iocb, from); | |
| if (xfs_is_zoned_inode(ip)) | |
| return xfs_file_dio_write_zoned(ip, iocb, from); | |
| if (iocb->ki_flags & IOCB_ATOMIC) | |
| return xfs_file_dio_write_atomic(ip, iocb, from); | |
| return xfs_file_dio_write_aligned(ip, iocb, from, | |
| &xfs_direct_write_iomap_ops, &xfs_dio_write_ops, NULL); | |
| } | |
| static noinline ssize_t | |
| xfs_file_dax_write( | |
| struct kiocb *iocb, | |
| struct iov_iter *from) | |
| { | |
| struct inode *inode = iocb->ki_filp->f_mapping->host; | |
| struct xfs_inode *ip = XFS_I(inode); | |
| unsigned int iolock = XFS_IOLOCK_EXCL; | |
| ssize_t ret, error = 0; | |
| loff_t pos; | |
| ret = xfs_ilock_iocb(iocb, iolock); | |
| if (ret) | |
| return ret; | |
| ret = xfs_file_write_checks(iocb, from, &iolock, NULL); | |
| if (ret) | |
| goto out; | |
| pos = iocb->ki_pos; | |
| trace_xfs_file_dax_write(iocb, from); | |
| ret = dax_iomap_rw(iocb, from, &xfs_dax_write_iomap_ops); | |
| if (ret > 0 && iocb->ki_pos > i_size_read(inode)) { | |
| i_size_write(inode, iocb->ki_pos); | |
| error = xfs_setfilesize(ip, pos, ret); | |
| } | |
| out: | |
| if (iolock) | |
| xfs_iunlock(ip, iolock); | |
| if (error) | |
| return error; | |
| if (ret > 0) { | |
| XFS_STATS_ADD(ip->i_mount, xs_write_bytes, ret); | |
| /* Handle various SYNC-type writes */ | |
| ret = generic_write_sync(iocb, ret); | |
| } | |
| return ret; | |
| } | |
| STATIC ssize_t | |
| xfs_file_buffered_write( | |
| struct kiocb *iocb, | |
| struct iov_iter *from) | |
| { | |
| struct inode *inode = iocb->ki_filp->f_mapping->host; | |
| struct xfs_inode *ip = XFS_I(inode); | |
| ssize_t ret; | |
| bool cleared_space = false; | |
| unsigned int iolock; | |
| write_retry: | |
| iolock = XFS_IOLOCK_EXCL; | |
| ret = xfs_ilock_iocb(iocb, iolock); | |
| if (ret) | |
| return ret; | |
| ret = xfs_file_write_checks(iocb, from, &iolock, NULL); | |
| if (ret) | |
| goto out; | |
| trace_xfs_file_buffered_write(iocb, from); | |
| ret = iomap_file_buffered_write(iocb, from, | |
| &xfs_buffered_write_iomap_ops, &xfs_iomap_write_ops, | |
| NULL); | |
| /* | |
| * If we hit a space limit, try to free up some lingering preallocated | |
| * space before returning an error. In the case of ENOSPC, first try to | |
| * write back all dirty inodes to free up some of the excess reserved | |
| * metadata space. This reduces the chances that the eofblocks scan | |
| * waits on dirty mappings. Since xfs_flush_inodes() is serialized, this | |
| * also behaves as a filter to prevent too many eofblocks scans from | |
| * running at the same time. Use a synchronous scan to increase the | |
| * effectiveness of the scan. | |
| */ | |
| if (ret == -EDQUOT && !cleared_space) { | |
| xfs_iunlock(ip, iolock); | |
| xfs_blockgc_free_quota(ip, XFS_ICWALK_FLAG_SYNC); | |
| cleared_space = true; | |
| goto write_retry; | |
| } else if (ret == -ENOSPC && !cleared_space) { | |
| struct xfs_icwalk icw = {0}; | |
| cleared_space = true; | |
| xfs_flush_inodes(ip->i_mount); | |
| xfs_iunlock(ip, iolock); | |
| icw.icw_flags = XFS_ICWALK_FLAG_SYNC; | |
| xfs_blockgc_free_space(ip->i_mount, &icw); | |
| goto write_retry; | |
| } | |
| out: | |
| if (iolock) | |
| xfs_iunlock(ip, iolock); | |
| if (ret > 0) { | |
| XFS_STATS_ADD(ip->i_mount, xs_write_bytes, ret); | |
| /* Handle various SYNC-type writes */ | |
| ret = generic_write_sync(iocb, ret); | |
| } | |
| return ret; | |
| } | |
| STATIC ssize_t | |
| xfs_file_buffered_write_zoned( | |
| struct kiocb *iocb, | |
| struct iov_iter *from) | |
| { | |
| struct xfs_inode *ip = XFS_I(iocb->ki_filp->f_mapping->host); | |
| struct xfs_mount *mp = ip->i_mount; | |
| unsigned int iolock = XFS_IOLOCK_EXCL; | |
| bool cleared_space = false; | |
| struct xfs_zone_alloc_ctx ac = { }; | |
| ssize_t ret; | |
| ret = xfs_zoned_write_space_reserve(mp, iocb, from, XFS_ZR_GREEDY, &ac); | |
| if (ret < 0) | |
| return ret; | |
| ret = xfs_ilock_iocb(iocb, iolock); | |
| if (ret) | |
| goto out_unreserve; | |
| ret = xfs_file_write_checks(iocb, from, &iolock, &ac); | |
| if (ret) | |
| goto out_unlock; | |
| /* | |
| * Truncate the iter to the length that we were actually able to | |
| * allocate blocks for. This needs to happen after | |
| * xfs_file_write_checks, because that assigns ki_pos for O_APPEND | |
| * writes. | |
| */ | |
| iov_iter_truncate(from, | |
| XFS_FSB_TO_B(mp, ac.reserved_blocks) - | |
| (iocb->ki_pos & mp->m_blockmask)); | |
| if (!iov_iter_count(from)) | |
| goto out_unlock; | |
| retry: | |
| trace_xfs_file_buffered_write(iocb, from); | |
| ret = iomap_file_buffered_write(iocb, from, | |
| &xfs_buffered_write_iomap_ops, &xfs_iomap_write_ops, | |
| &ac); | |
| if (ret == -ENOSPC && !cleared_space) { | |
| /* | |
| * Kick off writeback to convert delalloc space and release the | |
| * usually too pessimistic indirect block reservations. | |
| */ | |
| xfs_flush_inodes(mp); | |
| cleared_space = true; | |
| goto retry; | |
| } | |
| out_unlock: | |
| xfs_iunlock(ip, iolock); | |
| out_unreserve: | |
| xfs_zoned_space_unreserve(ip->i_mount, &ac); | |
| if (ret > 0) { | |
| XFS_STATS_ADD(mp, xs_write_bytes, ret); | |
| ret = generic_write_sync(iocb, ret); | |
| } | |
| return ret; | |
| } | |
| STATIC ssize_t | |
| xfs_file_write_iter( | |
| struct kiocb *iocb, | |
| struct iov_iter *from) | |
| { | |
| struct inode *inode = iocb->ki_filp->f_mapping->host; | |
| struct xfs_inode *ip = XFS_I(inode); | |
| ssize_t ret; | |
| size_t ocount = iov_iter_count(from); | |
| XFS_STATS_INC(ip->i_mount, xs_write_calls); | |
| if (ocount == 0) | |
| return 0; | |
| if (xfs_is_shutdown(ip->i_mount)) | |
| return -EIO; | |
| if (iocb->ki_flags & IOCB_ATOMIC) { | |
| if (ocount < xfs_get_atomic_write_min(ip)) | |
| return -EINVAL; | |
| if (ocount > xfs_get_atomic_write_max(ip)) | |
| return -EINVAL; | |
| ret = generic_atomic_write_valid(iocb, from); | |
| if (ret) | |
| return ret; | |
| } | |
| if (IS_DAX(inode)) | |
| return xfs_file_dax_write(iocb, from); | |
| if (iocb->ki_flags & IOCB_DIRECT) { | |
| /* | |
| * Allow a directio write to fall back to a buffered | |
| * write *only* in the case that we're doing a reflink | |
| * CoW. In all other directio scenarios we do not | |
| * allow an operation to fall back to buffered mode. | |
| */ | |
| ret = xfs_file_dio_write(iocb, from); | |
| if (ret != -ENOTBLK) | |
| return ret; | |
| } | |
| if (xfs_is_zoned_inode(ip)) | |
| return xfs_file_buffered_write_zoned(iocb, from); | |
| return xfs_file_buffered_write(iocb, from); | |
| } | |
| /* Does this file, inode, or mount want synchronous writes? */ | |
| static inline bool xfs_file_sync_writes(struct file *filp) | |
| { | |
| struct xfs_inode *ip = XFS_I(file_inode(filp)); | |
| if (xfs_has_wsync(ip->i_mount)) | |
| return true; | |
| if (filp->f_flags & (__O_SYNC | O_DSYNC)) | |
| return true; | |
| if (IS_SYNC(file_inode(filp))) | |
| return true; | |
| return false; | |
| } | |
| static int | |
| xfs_falloc_newsize( | |
| struct file *file, | |
| int mode, | |
| loff_t offset, | |
| loff_t len, | |
| loff_t *new_size) | |
| { | |
| struct inode *inode = file_inode(file); | |
| if ((mode & FALLOC_FL_KEEP_SIZE) || offset + len <= i_size_read(inode)) | |
| return 0; | |
| *new_size = offset + len; | |
| return inode_newsize_ok(inode, *new_size); | |
| } | |
| static int | |
| xfs_falloc_setsize( | |
| struct file *file, | |
| loff_t new_size) | |
| { | |
| struct iattr iattr = { | |
| .ia_valid = ATTR_SIZE, | |
| .ia_size = new_size, | |
| }; | |
| if (!new_size) | |
| return 0; | |
| return xfs_vn_setattr_size(file_mnt_idmap(file), file_dentry(file), | |
| &iattr); | |
| } | |
| static int | |
| xfs_falloc_collapse_range( | |
| struct file *file, | |
| loff_t offset, | |
| loff_t len, | |
| struct xfs_zone_alloc_ctx *ac) | |
| { | |
| struct inode *inode = file_inode(file); | |
| loff_t new_size = i_size_read(inode) - len; | |
| int error; | |
| if (!xfs_is_falloc_aligned(XFS_I(inode), offset, len)) | |
| return -EINVAL; | |
| /* | |
| * There is no need to overlap collapse range with EOF, in which case it | |
| * is effectively a truncate operation | |
| */ | |
| if (offset + len >= i_size_read(inode)) | |
| return -EINVAL; | |
| error = xfs_collapse_file_space(XFS_I(inode), offset, len, ac); | |
| if (error) | |
| return error; | |
| return xfs_falloc_setsize(file, new_size); | |
| } | |
| static int | |
| xfs_falloc_insert_range( | |
| struct file *file, | |
| loff_t offset, | |
| loff_t len) | |
| { | |
| struct inode *inode = file_inode(file); | |
| loff_t isize = i_size_read(inode); | |
| int error; | |
| if (!xfs_is_falloc_aligned(XFS_I(inode), offset, len)) | |
| return -EINVAL; | |
| /* | |
| * New inode size must not exceed ->s_maxbytes, accounting for | |
| * possible signed overflow. | |
| */ | |
| if (inode->i_sb->s_maxbytes - isize < len) | |
| return -EFBIG; | |
| /* Offset should be less than i_size */ | |
| if (offset >= isize) | |
| return -EINVAL; | |
| /* | |
| * Let writeback clean up EOF folio state before we bump i_size. The | |
| * insert flushes before it starts shifting and under certain | |
| * circumstances we can write back blocks that should technically be | |
| * considered post-eof (and thus should not be submitted for writeback). | |
| * | |
| * For example, a large, dirty folio that spans EOF and is backed by | |
| * post-eof COW fork preallocation can cause block remap into the data | |
| * fork. This shifts back out beyond EOF, but creates an expectedly | |
| * written post-eof block. The insert is going to flush, unmap and | |
| * cancel prealloc across this whole range, so flush EOF now before we | |
| * bump i_size to provide consistent behavior. | |
| */ | |
| error = filemap_write_and_wait_range(inode->i_mapping, isize, isize); | |
| if (error) | |
| return error; | |
| error = xfs_falloc_setsize(file, isize + len); | |
| if (error) | |
| return error; | |
| /* | |
| * Perform hole insertion now that the file size has been updated so | |
| * that if we crash during the operation we don't leave shifted extents | |
| * past EOF and hence losing access to the data that is contained within | |
| * them. | |
| */ | |
| return xfs_insert_file_space(XFS_I(inode), offset, len); | |
| } | |
| /* | |
| * For various operations we need to zero up to one block at each end of | |
| * the affected range. For zoned file systems this will require a space | |
| * allocation, for which we need a reservation ahead of time. | |
| */ | |
| #define XFS_ZONED_ZERO_EDGE_SPACE_RES 2 | |
| /* | |
| * Zero range implements a full zeroing mechanism but is only used in limited | |
| * situations. It is more efficient to allocate unwritten extents than to | |
| * perform zeroing here, so use an errortag to randomly force zeroing on DEBUG | |
| * kernels for added test coverage. | |
| * | |
| * On zoned file systems, the error is already injected by | |
| * xfs_file_zoned_fallocate, which then reserves the additional space needed. | |
| * We only check for this extra space reservation here. | |
| */ | |
| static inline bool | |
| xfs_falloc_force_zero( | |
| struct xfs_inode *ip, | |
| struct xfs_zone_alloc_ctx *ac) | |
| { | |
| if (xfs_is_zoned_inode(ip)) { | |
| if (ac->reserved_blocks > XFS_ZONED_ZERO_EDGE_SPACE_RES) { | |
| ASSERT(IS_ENABLED(CONFIG_XFS_DEBUG)); | |
| return true; | |
| } | |
| return false; | |
| } | |
| return XFS_TEST_ERROR(ip->i_mount, XFS_ERRTAG_FORCE_ZERO_RANGE); | |
| } | |
| static int | |
| xfs_falloc_write_zeroes( | |
| struct file *file, | |
| int mode, | |
| loff_t offset, | |
| loff_t len, | |
| struct xfs_zone_alloc_ctx *ac) | |
| { | |
| struct inode *inode = file_inode(file); | |
| struct xfs_inode *ip = XFS_I(inode); | |
| loff_t new_size = 0; | |
| int error; | |
| /* | |
| * XXX: There is an issue with bigrtalloc inodes where there can be blocks | |
| * that are written after the EOF block. This breaks the promise of no | |
| * written blocks past EOF. Return EOPNOTSUPP until it is fixed. | |
| */ | |
| if (xfs_is_always_cow_inode(ip) || xfs_inode_has_bigrtalloc(ip) || | |
| !bdev_write_zeroes_unmap_sectors(xfs_inode_buftarg(ip)->bt_bdev)) | |
| return -EOPNOTSUPP; | |
| error = xfs_falloc_newsize(file, mode, offset, len, &new_size); | |
| if (error) | |
| return error; | |
| /* | |
| * | |
| * |----------|----------|----------|----------|----------| | |
| * ^ ^ ^ ^ ^ ^ | |
| * | | | | | | | |
| * | offset | | end | | |
| * | | | | | |
| * offset_rd offset_ru end_rd end_ru | |
| * | |
| * xfs_free_file_space() punches the aligned interior offset_ru -> end_rd | |
| * to holes and byte-zeroes the in-range parts of the partial edge blocks, | |
| * offset -> offset_ru and end_rd -> end. xfs_zero_range() only touches | |
| * already-written blocks here; it skips holes and unwritten extents, so | |
| * unallocated/unwritten edge blocks are left for the allocation below. | |
| */ | |
| error = xfs_free_file_space(ip, offset, len, ac); | |
| if (error) | |
| return error; | |
| /* | |
| * Publish the new size while the punched range is still a hole, then | |
| * fill it with written zeroes. Like the other fallocate modes we use | |
| * xfs_falloc_setsize(), but it must run *before* we convert the range | |
| * to written extents: xfs_setattr_size() zeroes [old EOF, new size) via | |
| * xfs_zero_range(), which skips holes, so there is nothing to re-zero. | |
| * It will also writeback partial EOF block before the on-disk size is | |
| * logged. | |
| * Note: extending the size before allocating means a failure below | |
| * leaves the file larger with unallocated holes in the new range. | |
| * That is safe as holes within i_size read back as zeroes and expose | |
| * no stale data while the error is propagated to the caller. | |
| */ | |
| error = xfs_falloc_setsize(file, new_size); | |
| if (error) | |
| return error; | |
| /* | |
| * Allocate written, zeroed extents across the range. xfs_alloc_file_space() | |
| * rounds outward to block granularity: | |
| * - holes (the punched interior and any unallocated edge block) are | |
| * allocated and zeroed; | |
| * - unwritten extents (including unwritten edge blocks) are converted to | |
| * written and zeroed; | |
| * - Already written edge blocks are skipped. The out-of-range bytes of | |
| * a written edge block keep their data (offset_rd -> offset and | |
| * end -> end_rd); their in-range bytes (offset -> offset_ru and | |
| * end_ru -> end were already zeroed by xfs_free_file_space(). | |
| */ | |
| return xfs_alloc_file_space(ip, offset, len, | |
| XFS_ALLOC_FILE_SPACE_WRITE_ZEROES); | |
| } | |
| /* | |
| * Punch a hole and prealloc the range. We use a hole punch rather than | |
| * unwritten extent conversion for two reasons: | |
| * | |
| * 1.) Hole punch handles partial block zeroing for us. | |
| * 2.) If prealloc returns ENOSPC, the file range is still zero-valued by | |
| * virtue of the hole punch. | |
| */ | |
| static int | |
| xfs_falloc_zero_range( | |
| struct file *file, | |
| int mode, | |
| loff_t offset, | |
| loff_t len, | |
| struct xfs_zone_alloc_ctx *ac) | |
| { | |
| struct inode *inode = file_inode(file); | |
| struct xfs_inode *ip = XFS_I(inode); | |
| unsigned int blksize = i_blocksize(inode); | |
| loff_t new_size = 0; | |
| int error; | |
| trace_xfs_zero_file_space(ip); | |
| error = xfs_falloc_newsize(file, mode, offset, len, &new_size); | |
| if (error) | |
| return error; | |
| if (xfs_falloc_force_zero(ip, ac)) { | |
| error = xfs_zero_range(ip, offset, len, ac, NULL); | |
| } else { | |
| error = xfs_free_file_space(ip, offset, len, ac); | |
| if (error) | |
| return error; | |
| len = round_up(offset + len, blksize) - | |
| round_down(offset, blksize); | |
| offset = round_down(offset, blksize); | |
| error = xfs_alloc_file_space(ip, offset, len, | |
| XFS_ALLOC_FILE_SPACE_PREALLOC); | |
| } | |
| if (error) | |
| return error; | |
| return xfs_falloc_setsize(file, new_size); | |
| } | |
| static int | |
| xfs_falloc_unshare_range( | |
| struct file *file, | |
| int mode, | |
| loff_t offset, | |
| loff_t len) | |
| { | |
| struct inode *inode = file_inode(file); | |
| loff_t new_size = 0; | |
| int error; | |
| error = xfs_falloc_newsize(file, mode, offset, len, &new_size); | |
| if (error) | |
| return error; | |
| error = xfs_reflink_unshare(XFS_I(inode), offset, len); | |
| if (error) | |
| return error; | |
| error = xfs_alloc_file_space(XFS_I(inode), offset, len, | |
| XFS_ALLOC_FILE_SPACE_PREALLOC); | |
| if (error) | |
| return error; | |
| return xfs_falloc_setsize(file, new_size); | |
| } | |
| static int | |
| xfs_falloc_allocate_range( | |
| struct file *file, | |
| int mode, | |
| loff_t offset, | |
| loff_t len) | |
| { | |
| struct inode *inode = file_inode(file); | |
| loff_t new_size = 0; | |
| int error; | |
| /* | |
| * If always_cow mode we can't use preallocations and thus should not | |
| * create them. | |
| */ | |
| if (xfs_is_always_cow_inode(XFS_I(inode))) | |
| return -EOPNOTSUPP; | |
| error = xfs_falloc_newsize(file, mode, offset, len, &new_size); | |
| if (error) | |
| return error; | |
| error = xfs_alloc_file_space(XFS_I(inode), offset, len, | |
| XFS_ALLOC_FILE_SPACE_PREALLOC); | |
| if (error) | |
| return error; | |
| return xfs_falloc_setsize(file, new_size); | |
| } | |
| #define XFS_FALLOC_FL_SUPPORTED \ | |
| (FALLOC_FL_ALLOCATE_RANGE | FALLOC_FL_KEEP_SIZE | \ | |
| FALLOC_FL_PUNCH_HOLE | FALLOC_FL_COLLAPSE_RANGE | \ | |
| FALLOC_FL_ZERO_RANGE | FALLOC_FL_INSERT_RANGE | \ | |
| FALLOC_FL_UNSHARE_RANGE | FALLOC_FL_WRITE_ZEROES) | |
| STATIC long | |
| __xfs_file_fallocate( | |
| struct file *file, | |
| int mode, | |
| loff_t offset, | |
| loff_t len, | |
| struct xfs_zone_alloc_ctx *ac) | |
| { | |
| struct inode *inode = file_inode(file); | |
| struct xfs_inode *ip = XFS_I(inode); | |
| long error; | |
| uint iolock = XFS_IOLOCK_EXCL | XFS_MMAPLOCK_EXCL; | |
| xfs_ilock(ip, iolock); | |
| error = xfs_break_layouts(inode, &iolock, BREAK_UNMAP); | |
| if (error) | |
| goto out_unlock; | |
| /* | |
| * Must wait for all AIO to complete before we continue as AIO can | |
| * change the file size on completion without holding any locks we | |
| * currently hold. We must do this first because AIO can update both | |
| * the on disk and in memory inode sizes, and the operations that follow | |
| * require the in-memory size to be fully up-to-date. | |
| */ | |
| inode_dio_wait(inode); | |
| error = file_modified(file); | |
| if (error) | |
| goto out_unlock; | |
| switch (mode & FALLOC_FL_MODE_MASK) { | |
| case FALLOC_FL_PUNCH_HOLE: | |
| error = xfs_free_file_space(ip, offset, len, ac); | |
| break; | |
| case FALLOC_FL_COLLAPSE_RANGE: | |
| error = xfs_falloc_collapse_range(file, offset, len, ac); | |
| break; | |
| case FALLOC_FL_INSERT_RANGE: | |
| error = xfs_falloc_insert_range(file, offset, len); | |
| break; | |
| case FALLOC_FL_ZERO_RANGE: | |
| error = xfs_falloc_zero_range(file, mode, offset, len, ac); | |
| break; | |
| case FALLOC_FL_UNSHARE_RANGE: | |
| error = xfs_falloc_unshare_range(file, mode, offset, len); | |
| break; | |
| case FALLOC_FL_ALLOCATE_RANGE: | |
| error = xfs_falloc_allocate_range(file, mode, offset, len); | |
| break; | |
| case FALLOC_FL_WRITE_ZEROES: | |
| error = xfs_falloc_write_zeroes(file, mode, offset, len, ac); | |
| break; | |
| default: | |
| error = -EOPNOTSUPP; | |
| break; | |
| } | |
| if (!error && xfs_file_sync_writes(file)) | |
| error = xfs_log_force_inode(ip); | |
| out_unlock: | |
| xfs_iunlock(ip, iolock); | |
| return error; | |
| } | |
| static long | |
| xfs_file_zoned_fallocate( | |
| struct file *file, | |
| int mode, | |
| loff_t offset, | |
| loff_t len) | |
| { | |
| struct xfs_zone_alloc_ctx ac = { }; | |
| struct xfs_inode *ip = XFS_I(file_inode(file)); | |
| struct xfs_mount *mp = ip->i_mount; | |
| xfs_filblks_t count_fsb; | |
| int error; | |
| /* | |
| * If full zeroing is forced by the error injection knob, we need a | |
| * space reservation that covers the entire range. See the comment in | |
| * xfs_zoned_write_space_reserve for the rationale for the calculation. | |
| * Otherwise just reserve space for the two boundary blocks. | |
| */ | |
| count_fsb = XFS_ZONED_ZERO_EDGE_SPACE_RES; | |
| if ((mode & FALLOC_FL_MODE_MASK) == FALLOC_FL_ZERO_RANGE && | |
| XFS_TEST_ERROR(mp, XFS_ERRTAG_FORCE_ZERO_RANGE)) | |
| count_fsb += XFS_B_TO_FSB(mp, len) + 1; | |
| error = xfs_zoned_space_reserve(mp, count_fsb, XFS_ZR_RESERVED, &ac); | |
| if (error) | |
| return error; | |
| error = __xfs_file_fallocate(file, mode, offset, len, &ac); | |
| xfs_zoned_space_unreserve(mp, &ac); | |
| return error; | |
| } | |
| static long | |
| xfs_file_fallocate( | |
| struct file *file, | |
| int mode, | |
| loff_t offset, | |
| loff_t len) | |
| { | |
| struct inode *inode = file_inode(file); | |
| if (!S_ISREG(inode->i_mode)) | |
| return -EINVAL; | |
| if (mode & ~XFS_FALLOC_FL_SUPPORTED) | |
| return -EOPNOTSUPP; | |
| /* | |
| * For zoned file systems, zeroing the first and last block of a hole | |
| * punch requires allocating a new block to rewrite the remaining data | |
| * and new zeroes out of place. Get a reservations for those before | |
| * taking the iolock. Dip into the reserved pool because we are | |
| * expected to be able to punch a hole even on a completely full | |
| * file system. | |
| */ | |
| if (xfs_is_zoned_inode(XFS_I(inode)) && | |
| (mode & (FALLOC_FL_PUNCH_HOLE | FALLOC_FL_ZERO_RANGE | | |
| FALLOC_FL_COLLAPSE_RANGE))) | |
| return xfs_file_zoned_fallocate(file, mode, offset, len); | |
| return __xfs_file_fallocate(file, mode, offset, len, NULL); | |
| } | |
| STATIC int | |
| xfs_file_fadvise( | |
| struct file *file, | |
| loff_t start, | |
| loff_t end, | |
| int advice) | |
| { | |
| struct xfs_inode *ip = XFS_I(file_inode(file)); | |
| int ret; | |
| int lockflags = 0; | |
| /* | |
| * Operations creating pages in page cache need protection from hole | |
| * punching and similar ops | |
| */ | |
| if (advice == POSIX_FADV_WILLNEED) { | |
| lockflags = XFS_IOLOCK_SHARED; | |
| xfs_ilock(ip, lockflags); | |
| } | |
| ret = generic_fadvise(file, start, end, advice); | |
| if (lockflags) | |
| xfs_iunlock(ip, lockflags); | |
| return ret; | |
| } | |
| STATIC loff_t | |
| xfs_file_remap_range( | |
| struct file *file_in, | |
| loff_t pos_in, | |
| struct file *file_out, | |
| loff_t pos_out, | |
| loff_t len, | |
| unsigned int remap_flags) | |
| { | |
| struct inode *inode_in = file_inode(file_in); | |
| struct xfs_inode *src = XFS_I(inode_in); | |
| struct inode *inode_out = file_inode(file_out); | |
| struct xfs_inode *dest = XFS_I(inode_out); | |
| struct xfs_mount *mp = src->i_mount; | |
| loff_t remapped = 0; | |
| xfs_extlen_t cowextsize; | |
| int ret; | |
| if (remap_flags & ~(REMAP_FILE_DEDUP | REMAP_FILE_ADVISORY)) | |
| return -EINVAL; | |
| if (!xfs_has_reflink(mp)) | |
| return -EOPNOTSUPP; | |
| if (xfs_is_shutdown(mp)) | |
| return -EIO; | |
| /* Prepare and then clone file data. */ | |
| ret = xfs_reflink_remap_prep(file_in, pos_in, file_out, pos_out, | |
| &len, remap_flags); | |
| if (ret || len == 0) | |
| return ret; | |
| trace_xfs_reflink_remap_range(src, pos_in, len, dest, pos_out); | |
| ret = xfs_reflink_remap_blocks(src, pos_in, dest, pos_out, len, | |
| &remapped); | |
| if (ret) | |
| goto out_unlock; | |
| /* | |
| * Carry the cowextsize hint from src to dest if we're sharing the | |
| * entire source file to the entire destination file, the source file | |
| * has a cowextsize hint, and the destination file does not. | |
| */ | |
| cowextsize = 0; | |
| if (pos_in == 0 && len == i_size_read(inode_in) && | |
| (src->i_diflags2 & XFS_DIFLAG2_COWEXTSIZE) && | |
| pos_out == 0 && len >= i_size_read(inode_out) && | |
| !(dest->i_diflags2 & XFS_DIFLAG2_COWEXTSIZE)) | |
| cowextsize = src->i_cowextsize; | |
| ret = xfs_reflink_update_dest(dest, pos_out + len, cowextsize, | |
| remap_flags); | |
| if (ret) | |
| goto out_unlock; | |
| if (xfs_file_sync_writes(file_in) || xfs_file_sync_writes(file_out)) | |
| xfs_log_force_inode(dest); | |
| out_unlock: | |
| xfs_iunlock2_remapping(src, dest); | |
| if (ret) | |
| trace_xfs_reflink_remap_range_error(dest, ret, _RET_IP_); | |
| /* | |
| * If the caller did not set CAN_SHORTEN, then it is not prepared to | |
| * handle partial results -- either the whole remap succeeds, or we | |
| * must say why it did not. In this case, any error should be returned | |
| * to the caller. | |
| */ | |
| if (ret && remapped < len && !(remap_flags & REMAP_FILE_CAN_SHORTEN)) | |
| return ret; | |
| return remapped > 0 ? remapped : ret; | |
| } | |
| STATIC int | |
| xfs_file_open( | |
| struct inode *inode, | |
| struct file *file) | |
| { | |
| if (xfs_is_shutdown(XFS_M(inode->i_sb))) | |
| return -EIO; | |
| file->f_mode |= FMODE_NOWAIT | FMODE_CAN_ODIRECT; | |
| if (xfs_get_atomic_write_min(XFS_I(inode)) > 0) | |
| file->f_mode |= FMODE_CAN_ATOMIC_WRITE; | |
| return generic_file_open(inode, file); | |
| } | |
| STATIC int | |
| xfs_dir_open( | |
| struct inode *inode, | |
| struct file *file) | |
| { | |
| struct xfs_inode *ip = XFS_I(inode); | |
| unsigned int mode; | |
| int error; | |
| if (xfs_is_shutdown(ip->i_mount)) | |
| return -EIO; | |
| error = generic_file_open(inode, file); | |
| if (error) | |
| return error; | |
| /* | |
| * If there are any blocks, read-ahead block 0 as we're almost | |
| * certain to have the next operation be a read there. | |
| */ | |
| mode = xfs_ilock_data_map_shared(ip); | |
| if (ip->i_df.if_nextents > 0) | |
| error = xfs_dir3_data_readahead(ip, 0, 0); | |
| xfs_iunlock(ip, mode); | |
| return error; | |
| } | |
| /* | |
| * Don't bother propagating errors. We're just doing cleanup, and the caller | |
| * ignores the return value anyway. | |
| */ | |
| STATIC int | |
| xfs_file_release( | |
| struct inode *inode, | |
| struct file *file) | |
| { | |
| struct xfs_inode *ip = XFS_I(inode); | |
| struct xfs_mount *mp = ip->i_mount; | |
| /* | |
| * If this is a read-only mount or the file system has been shut down, | |
| * don't generate I/O. | |
| */ | |
| if (xfs_is_readonly(mp) || xfs_is_shutdown(mp)) | |
| return 0; | |
| /* | |
| * If we previously truncated this file and removed old data in the | |
| * process, we want to initiate "early" writeout on the last close. | |
| * This is an attempt to combat the notorious NULL files problem which | |
| * is particularly noticeable from a truncate down, buffered (re-)write | |
| * (delalloc), followed by a crash. What we are effectively doing here | |
| * is significantly reducing the time window where we'd otherwise be | |
| * exposed to that problem. | |
| */ | |
| if (xfs_iflags_test_and_clear(ip, XFS_ITRUNCATED)) { | |
| xfs_iflags_clear(ip, XFS_EOFBLOCKS_RELEASED); | |
| if (ip->i_delayed_blks > 0) | |
| filemap_flush(inode->i_mapping); | |
| } | |
| /* | |
| * XFS aggressively preallocates post-EOF space to generate contiguous | |
| * allocations for writers that append to the end of the file. | |
| * | |
| * To support workloads that close and reopen the file frequently, these | |
| * preallocations usually persist after a close unless it is the first | |
| * close for the inode. This is a tradeoff to generate tightly packed | |
| * data layouts for unpacking tarballs or similar archives that write | |
| * one file after another without going back to it while keeping the | |
| * preallocation for files that have recurring open/write/close cycles. | |
| * | |
| * This heuristic is skipped for inodes with the append-only flag as | |
| * that flag is rather pointless for inodes written only once. | |
| * | |
| * There is no point in freeing blocks here for open but unlinked files | |
| * as they will be taken care of by the inactivation path soon. | |
| * | |
| * When releasing a read-only context, don't flush data or trim post-EOF | |
| * blocks. This avoids open/read/close workloads from removing EOF | |
| * blocks that other writers depend upon to reduce fragmentation. | |
| * | |
| * Inodes on the zoned RT device never have preallocations, so skip | |
| * taking the locks below. | |
| */ | |
| if (!inode->i_nlink || | |
| !(file->f_mode & FMODE_WRITE) || | |
| (ip->i_diflags & XFS_DIFLAG_APPEND) || | |
| xfs_is_zoned_inode(ip)) | |
| return 0; | |
| /* | |
| * If we can't get the iolock just skip truncating the blocks past EOF | |
| * because we could deadlock with the mmap_lock otherwise. We'll get | |
| * another chance to drop them once the last reference to the inode is | |
| * dropped, so we'll never leak blocks permanently. | |
| */ | |
| if (!xfs_iflags_test(ip, XFS_EOFBLOCKS_RELEASED) && | |
| xfs_ilock_nowait(ip, XFS_IOLOCK_EXCL)) { | |
| if (xfs_can_free_eofblocks(ip) && | |
| !xfs_iflags_test_and_set(ip, XFS_EOFBLOCKS_RELEASED)) | |
| xfs_free_eofblocks(ip); | |
| xfs_iunlock(ip, XFS_IOLOCK_EXCL); | |
| } | |
| return 0; | |
| } | |
| STATIC int | |
| xfs_file_readdir( | |
| struct file *file, | |
| struct dir_context *ctx) | |
| { | |
| struct inode *inode = file_inode(file); | |
| xfs_inode_t *ip = XFS_I(inode); | |
| size_t bufsize; | |
| /* | |
| * The Linux API doesn't pass down the total size of the buffer | |
| * we read into down to the filesystem. With the filldir concept | |
| * it's not needed for correct information, but the XFS dir2 leaf | |
| * code wants an estimate of the buffer size to calculate it's | |
| * readahead window and size the buffers used for mapping to | |
| * physical blocks. | |
| * | |
| * Try to give it an estimate that's good enough, maybe at some | |
| * point we can change the ->readdir prototype to include the | |
| * buffer size. For now we use the current glibc buffer size. | |
| */ | |
| bufsize = (size_t)min_t(loff_t, XFS_READDIR_BUFSIZE, ip->i_disk_size); | |
| return xfs_readdir(NULL, ip, ctx, bufsize); | |
| } | |
| STATIC loff_t | |
| xfs_file_llseek( | |
| struct file *file, | |
| loff_t offset, | |
| int whence) | |
| { | |
| struct inode *inode = file->f_mapping->host; | |
| if (xfs_is_shutdown(XFS_I(inode)->i_mount)) | |
| return -EIO; | |
| switch (whence) { | |
| default: | |
| return generic_file_llseek(file, offset, whence); | |
| case SEEK_HOLE: | |
| offset = iomap_seek_hole(inode, offset, &xfs_seek_iomap_ops); | |
| break; | |
| case SEEK_DATA: | |
| offset = iomap_seek_data(inode, offset, &xfs_seek_iomap_ops); | |
| break; | |
| } | |
| if (offset < 0) | |
| return offset; | |
| return vfs_setpos(file, offset, inode->i_sb->s_maxbytes); | |
| } | |
| static inline vm_fault_t | |
| xfs_dax_fault_locked( | |
| struct vm_fault *vmf, | |
| unsigned int order, | |
| bool write_fault) | |
| { | |
| vm_fault_t ret; | |
| unsigned long pfn; | |
| if (!IS_ENABLED(CONFIG_FS_DAX)) { | |
| ASSERT(0); | |
| return VM_FAULT_SIGBUS; | |
| } | |
| ret = dax_iomap_fault(vmf, order, &pfn, NULL, | |
| (write_fault && !vmf->cow_page) ? | |
| &xfs_dax_write_iomap_ops : | |
| &xfs_read_iomap_ops); | |
| if (ret & VM_FAULT_NEEDDSYNC) | |
| ret = dax_finish_sync_fault(vmf, order, pfn); | |
| return ret; | |
| } | |
| static vm_fault_t | |
| xfs_dax_read_fault( | |
| struct vm_fault *vmf, | |
| unsigned int order) | |
| { | |
| struct xfs_inode *ip = XFS_I(file_inode(vmf->vma->vm_file)); | |
| vm_fault_t ret; | |
| trace_xfs_read_fault(ip, order); | |
| xfs_ilock(ip, XFS_MMAPLOCK_SHARED); | |
| ret = xfs_dax_fault_locked(vmf, order, false); | |
| xfs_iunlock(ip, XFS_MMAPLOCK_SHARED); | |
| return ret; | |
| } | |
| /* | |
| * Locking for serialisation of IO during page faults. This results in a lock | |
| * ordering of: | |
| * | |
| * mmap_lock (MM) | |
| * sb_start_pagefault(vfs, freeze) | |
| * invalidate_lock (vfs/XFS_MMAPLOCK - truncate serialisation) | |
| * page_lock (MM) | |
| * i_lock (XFS - extent map serialisation) | |
| */ | |
| static vm_fault_t | |
| __xfs_write_fault( | |
| struct vm_fault *vmf, | |
| unsigned int order, | |
| struct xfs_zone_alloc_ctx *ac) | |
| { | |
| struct inode *inode = file_inode(vmf->vma->vm_file); | |
| struct xfs_inode *ip = XFS_I(inode); | |
| unsigned int lock_mode = XFS_MMAPLOCK_SHARED; | |
| vm_fault_t ret; | |
| trace_xfs_write_fault(ip, order); | |
| sb_start_pagefault(inode->i_sb); | |
| file_update_time(vmf->vma->vm_file); | |
| /* | |
| * Normally we only need the shared mmaplock, but if a reflink remap is | |
| * in progress we take the exclusive lock to wait for the remap to | |
| * finish before taking a write fault. | |
| */ | |
| xfs_ilock(ip, XFS_MMAPLOCK_SHARED); | |
| if (xfs_iflags_test(ip, XFS_IREMAPPING)) { | |
| xfs_iunlock(ip, XFS_MMAPLOCK_SHARED); | |
| xfs_ilock(ip, XFS_MMAPLOCK_EXCL); | |
| lock_mode = XFS_MMAPLOCK_EXCL; | |
| } | |
| if (IS_DAX(inode)) | |
| ret = xfs_dax_fault_locked(vmf, order, true); | |
| else | |
| ret = iomap_page_mkwrite(vmf, &xfs_buffered_write_iomap_ops, | |
| ac); | |
| xfs_iunlock(ip, lock_mode); | |
| sb_end_pagefault(inode->i_sb); | |
| return ret; | |
| } | |
| static vm_fault_t | |
| xfs_write_fault_zoned( | |
| struct vm_fault *vmf, | |
| unsigned int order) | |
| { | |
| struct xfs_inode *ip = XFS_I(file_inode(vmf->vma->vm_file)); | |
| unsigned int len = folio_size(page_folio(vmf->page)); | |
| struct xfs_zone_alloc_ctx ac = { }; | |
| int error; | |
| vm_fault_t ret; | |
| /* | |
| * This could over-allocate as it doesn't check for truncation. | |
| * | |
| * But as the overallocation is limited to less than a folio and will be | |
| * release instantly that's just fine. | |
| */ | |
| error = xfs_zoned_space_reserve(ip->i_mount, | |
| XFS_B_TO_FSB(ip->i_mount, len), 0, &ac); | |
| if (error < 0) | |
| return vmf_fs_error(error); | |
| ret = __xfs_write_fault(vmf, order, &ac); | |
| xfs_zoned_space_unreserve(ip->i_mount, &ac); | |
| return ret; | |
| } | |
| static vm_fault_t | |
| xfs_write_fault( | |
| struct vm_fault *vmf, | |
| unsigned int order) | |
| { | |
| if (xfs_is_zoned_inode(XFS_I(file_inode(vmf->vma->vm_file)))) | |
| return xfs_write_fault_zoned(vmf, order); | |
| return __xfs_write_fault(vmf, order, NULL); | |
| } | |
| static inline bool | |
| xfs_is_write_fault( | |
| struct vm_fault *vmf) | |
| { | |
| return (vmf->flags & FAULT_FLAG_WRITE) && | |
| (vmf->vma->vm_flags & VM_SHARED); | |
| } | |
| static vm_fault_t | |
| xfs_filemap_fault( | |
| struct vm_fault *vmf) | |
| { | |
| struct inode *inode = file_inode(vmf->vma->vm_file); | |
| /* DAX can shortcut the normal fault path on write faults! */ | |
| if (IS_DAX(inode)) { | |
| if (xfs_is_write_fault(vmf)) | |
| return xfs_write_fault(vmf, 0); | |
| return xfs_dax_read_fault(vmf, 0); | |
| } | |
| trace_xfs_read_fault(XFS_I(inode), 0); | |
| return filemap_fault(vmf); | |
| } | |
| static vm_fault_t | |
| xfs_filemap_huge_fault( | |
| struct vm_fault *vmf, | |
| unsigned int order) | |
| { | |
| if (!IS_DAX(file_inode(vmf->vma->vm_file))) | |
| return VM_FAULT_FALLBACK; | |
| /* DAX can shortcut the normal fault path on write faults! */ | |
| if (xfs_is_write_fault(vmf)) | |
| return xfs_write_fault(vmf, order); | |
| return xfs_dax_read_fault(vmf, order); | |
| } | |
| static vm_fault_t | |
| xfs_filemap_page_mkwrite( | |
| struct vm_fault *vmf) | |
| { | |
| return xfs_write_fault(vmf, 0); | |
| } | |
| /* | |
| * pfn_mkwrite was originally intended to ensure we capture time stamp updates | |
| * on write faults. In reality, it needs to serialise against truncate and | |
| * prepare memory for writing so handle is as standard write fault. | |
| */ | |
| static vm_fault_t | |
| xfs_filemap_pfn_mkwrite( | |
| struct vm_fault *vmf) | |
| { | |
| return xfs_write_fault(vmf, 0); | |
| } | |
| static const struct vm_operations_struct xfs_file_vm_ops = { | |
| .fault = xfs_filemap_fault, | |
| .huge_fault = xfs_filemap_huge_fault, | |
| .map_pages = filemap_map_pages, | |
| .page_mkwrite = xfs_filemap_page_mkwrite, | |
| .pfn_mkwrite = xfs_filemap_pfn_mkwrite, | |
| }; | |
| STATIC int | |
| xfs_file_mmap_prepare( | |
| struct vm_area_desc *desc) | |
| { | |
| struct file *file = desc->file; | |
| struct inode *inode = file_inode(file); | |
| struct xfs_buftarg *target = xfs_inode_buftarg(XFS_I(inode)); | |
| /* | |
| * We don't support synchronous mappings for non-DAX files and | |
| * for DAX files if underneath dax_device is not synchronous. | |
| */ | |
| if (!daxdev_mapping_supported(desc, file_inode(file), | |
| target->bt_daxdev)) | |
| return -EOPNOTSUPP; | |
| file_accessed(file); | |
| desc->vm_ops = &xfs_file_vm_ops; | |
| if (IS_DAX(inode)) | |
| vma_desc_set_flags(desc, VMA_HUGEPAGE_BIT); | |
| return 0; | |
| } | |
| const struct file_operations xfs_file_operations = { | |
| .llseek = xfs_file_llseek, | |
| .read_iter = xfs_file_read_iter, | |
| .write_iter = xfs_file_write_iter, | |
| .splice_read = xfs_file_splice_read, | |
| .splice_write = iter_file_splice_write, | |
| .iopoll = iocb_bio_iopoll, | |
| .unlocked_ioctl = xfs_file_ioctl, | |
| #ifdef CONFIG_COMPAT | |
| .compat_ioctl = xfs_file_compat_ioctl, | |
| #endif | |
| .mmap_prepare = xfs_file_mmap_prepare, | |
| .open = xfs_file_open, | |
| .release = xfs_file_release, | |
| .fsync = xfs_file_fsync, | |
| .get_unmapped_area = thp_get_unmapped_area, | |
| .fallocate = xfs_file_fallocate, | |
| .fadvise = xfs_file_fadvise, | |
| .remap_file_range = xfs_file_remap_range, | |
| .fop_flags = FOP_MMAP_SYNC | FOP_BUFFER_RASYNC | | |
| FOP_BUFFER_WASYNC | FOP_DIO_PARALLEL_WRITE | | |
| FOP_DONTCACHE, | |
| .setlease = generic_setlease, | |
| }; | |
| const struct file_operations xfs_dir_file_operations = { | |
| .open = xfs_dir_open, | |
| .read = generic_read_dir, | |
| .iterate_shared = xfs_file_readdir, | |
| .llseek = generic_file_llseek, | |
| .unlocked_ioctl = xfs_file_ioctl, | |
| #ifdef CONFIG_COMPAT | |
| .compat_ioctl = xfs_file_compat_ioctl, | |
| #endif | |
| .fsync = xfs_dir_fsync, | |
| .setlease = generic_setlease, | |
| }; |