| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (c) 2000-2006 Silicon Graphics, Inc. | |
| * All Rights Reserved. | |
| */ | |
| #include "xfs_platform.h" | |
| #include <linux/backing-dev.h> | |
| #include <linux/dax.h> | |
| #include "xfs_shared.h" | |
| #include "xfs_format.h" | |
| #include "xfs_log_format.h" | |
| #include "xfs_trans_resv.h" | |
| #include "xfs_mount.h" | |
| #include "xfs_trace.h" | |
| #include "xfs_log.h" | |
| #include "xfs_log_recover.h" | |
| #include "xfs_log_priv.h" | |
| #include "xfs_trans.h" | |
| #include "xfs_buf_item.h" | |
| #include "xfs_errortag.h" | |
| #include "xfs_error.h" | |
| #include "xfs_ag.h" | |
| #include "xfs_buf_mem.h" | |
| #include "xfs_notify_failure.h" | |
| struct kmem_cache *xfs_buf_cache; | |
| /* | |
| * Locking orders | |
| * | |
| * xfs_buf_stale: | |
| * b_sema (caller holds) | |
| * b_lockref.lock | |
| * lru_lock | |
| * | |
| * xfs_buf_rele: | |
| * b_lockref.lock | |
| * lru_lock | |
| * | |
| * xfs_buftarg_drain_rele | |
| * lru_lock | |
| * b_lockref.lock (trylock due to inversion) | |
| * | |
| * xfs_buftarg_isolate | |
| * lru_lock | |
| * b_lockref.lock (trylock due to inversion) | |
| */ | |
| static void xfs_buf_submit(struct xfs_buf *bp); | |
| static int xfs_buf_iowait(struct xfs_buf *bp); | |
| static inline bool xfs_buf_is_uncached(struct xfs_buf *bp) | |
| { | |
| return bp->b_rhash_key == XFS_BUF_DADDR_NULL; | |
| } | |
| static inline void | |
| xfs_buf_set_flags( | |
| struct xfs_buf *bp, | |
| unsigned int flags) | |
| { | |
| WRITE_ONCE(bp->b_flags, bp->b_flags | flags); | |
| } | |
| static inline void | |
| xfs_buf_clear_flags( | |
| struct xfs_buf *bp, | |
| unsigned int flags) | |
| { | |
| WRITE_ONCE(bp->b_flags, bp->b_flags & ~flags); | |
| } | |
| void | |
| xfs_buf_set_uptodate( | |
| struct xfs_buf *bp) | |
| { | |
| xfs_buf_set_flags(bp, XBF_DONE); | |
| } | |
| /* | |
| * When we mark a buffer stale, we remove the buffer from the LRU and clear the | |
| * b_lru_ref count so that the buffer is freed immediately when the buffer | |
| * reference count falls to zero. If the buffer is already on the LRU, we need | |
| * to remove the reference that LRU holds on the buffer. | |
| * | |
| * This prevents build-up of stale buffers on the LRU. | |
| */ | |
| void | |
| xfs_buf_stale( | |
| struct xfs_buf *bp) | |
| { | |
| ASSERT(xfs_buf_islocked(bp)); | |
| xfs_buf_set_flags(bp, XBF_STALE); | |
| /* | |
| * Clear the delwri status so that a delwri queue walker will not | |
| * flush this buffer to disk now that it is stale. The delwri queue has | |
| * a reference to the buffer, so this is safe to do. | |
| */ | |
| xfs_buf_clear_flags(bp, _XBF_DELWRI_Q); | |
| spin_lock(&bp->b_lockref.lock); | |
| atomic_set(&bp->b_lru_ref, 0); | |
| if (!lockref_is_dead(&bp->b_lockref)) | |
| list_lru_del_obj(&bp->b_target->bt_lru, &bp->b_lru); | |
| spin_unlock(&bp->b_lockref.lock); | |
| } | |
| void | |
| xfs_buf_clear_stale( | |
| struct xfs_buf *bp) | |
| { | |
| ASSERT(bp->b_flags & XBF_STALE); | |
| xfs_buf_clear_flags(bp, XBF_STALE); | |
| } | |
| static void | |
| xfs_buf_free_callback( | |
| struct callback_head *cb) | |
| { | |
| struct xfs_buf *bp = container_of(cb, struct xfs_buf, b_rcu); | |
| if (bp->b_maps != &bp->__b_map) | |
| kfree(bp->b_maps); | |
| kmem_cache_free(xfs_buf_cache, bp); | |
| } | |
| static void | |
| xfs_buf_free( | |
| struct xfs_buf *bp) | |
| { | |
| unsigned int size = BBTOB(bp->b_length); | |
| might_sleep(); | |
| trace_xfs_buf_free(bp, _RET_IP_); | |
| ASSERT(list_empty(&bp->b_lru)); | |
| if (!xfs_buftarg_is_mem(bp->b_target) && size >= PAGE_SIZE) | |
| mm_account_reclaimed_pages(howmany(size, PAGE_SIZE)); | |
| if (is_vmalloc_addr(bp->b_addr)) | |
| vfree(bp->b_addr); | |
| else if (bp->b_flags & _XBF_KMEM) | |
| kfree(bp->b_addr); | |
| else if (bp->b_addr) | |
| folio_put(virt_to_folio(bp->b_addr)); | |
| call_rcu(&bp->b_rcu, xfs_buf_free_callback); | |
| } | |
| static int | |
| xfs_buf_alloc_folio( | |
| struct xfs_buf *bp, | |
| size_t size, | |
| gfp_t gfp_mask) | |
| { | |
| struct folio *folio; | |
| folio = folio_alloc(gfp_mask, get_order(size)); | |
| if (!folio) | |
| return -ENOMEM; | |
| bp->b_addr = folio_address(folio); | |
| trace_xfs_buf_backing_folio(bp, _RET_IP_); | |
| return 0; | |
| } | |
| static int | |
| xfs_buf_alloc_kmem( | |
| struct xfs_buf *bp, | |
| size_t size, | |
| gfp_t gfp_mask) | |
| { | |
| ASSERT(is_power_of_2(size)); | |
| ASSERT(size < PAGE_SIZE); | |
| bp->b_addr = kmalloc(size, gfp_mask | __GFP_RECLAIMABLE); | |
| if (!bp->b_addr) | |
| return -ENOMEM; | |
| /* | |
| * Slab guarantees that we get back naturally aligned allocations for | |
| * power of two sizes. Keep this check as the canary in the coal mine | |
| * if anything changes in slab. | |
| */ | |
| if (WARN_ON_ONCE(!IS_ALIGNED((unsigned long)bp->b_addr, size))) { | |
| kfree(bp->b_addr); | |
| bp->b_addr = NULL; | |
| return -ENOMEM; | |
| } | |
| xfs_buf_set_flags(bp, _XBF_KMEM); | |
| trace_xfs_buf_backing_kmem(bp, _RET_IP_); | |
| return 0; | |
| } | |
| static int | |
| xfs_buf_alloc_vmalloc( | |
| struct xfs_buf *bp, | |
| size_t size, | |
| gfp_t gfp_mask) | |
| { | |
| for (;;) { | |
| bp->b_addr = __vmalloc(size, gfp_mask); | |
| if (bp->b_addr) | |
| break; | |
| if (gfp_mask & __GFP_NORETRY) | |
| return -ENOMEM; | |
| XFS_STATS_INC(bp->b_mount, xb_page_retries); | |
| memalloc_retry_wait(gfp_mask); | |
| } | |
| trace_xfs_buf_backing_vmalloc(bp, _RET_IP_); | |
| return 0; | |
| } | |
| /* | |
| * Allocate backing memory for a buffer. | |
| * | |
| * For tmpfs-backed buffers used by in-memory btrees this directly maps the | |
| * tmpfs page cache folios. | |
| * | |
| * For real file system buffers there are three different kinds backing memory: | |
| * | |
| * The first type backs the buffer by a kmalloc allocation. This is done for | |
| * less than PAGE_SIZE allocations to avoid wasting memory. | |
| * | |
| * The second type is a single folio buffer - this may be a high order folio or | |
| * just a single page sized folio, but either way they get treated the same way | |
| * by the rest of the code - the buffer memory spans a single contiguous memory | |
| * region that we don't have to map and unmap to access the data directly. | |
| * | |
| * The third type of buffer is the vmalloc()d buffer. This provides the buffer | |
| * with the required contiguous memory region but backed by discontiguous | |
| * physical pages. | |
| */ | |
| static int | |
| xfs_buf_alloc_backing_mem( | |
| struct xfs_buf *bp, | |
| xfs_buf_flags_t flags) | |
| { | |
| size_t size = BBTOB(bp->b_length); | |
| gfp_t gfp_mask = GFP_KERNEL | __GFP_NOLOCKDEP | __GFP_NOWARN; | |
| if (xfs_buftarg_is_mem(bp->b_target)) | |
| return xmbuf_map_backing_mem(bp); | |
| /* Assure zeroed buffer for non-read cases. */ | |
| if (!(flags & XBF_READ)) | |
| gfp_mask |= __GFP_ZERO; | |
| if (flags & XBF_READ_AHEAD) | |
| gfp_mask |= __GFP_NORETRY; | |
| /* | |
| * Optimistically attempt a single high order folio allocation for | |
| * larger than PAGE_SIZE buffers. | |
| * | |
| * Allocating a high order folio makes the assumption that buffers are a | |
| * power-of-2 size, matching the power-of-2 folios sizes available. | |
| * | |
| * The exception here are user xattr data buffers, which can be arbitrarily | |
| * sized up to 64kB plus structure metadata, skip straight to the vmalloc | |
| * path for them instead of wasting memory here. | |
| */ | |
| if (size > PAGE_SIZE) { | |
| if (is_power_of_2(size)) { | |
| gfp_t folio_gfp = gfp_mask; | |
| folio_gfp &= ~__GFP_DIRECT_RECLAIM; | |
| folio_gfp |= __GFP_NORETRY; | |
| if (xfs_buf_alloc_folio(bp, size, folio_gfp) == 0) | |
| return 0; | |
| trace_xfs_buf_backing_fallback(bp, _RET_IP_); | |
| } | |
| return xfs_buf_alloc_vmalloc(bp, size, gfp_mask); | |
| } | |
| /* | |
| * The slab allocator now guarantees aligned allocations for all power | |
| * of two sizes. This covers most smaller XFS buffers, so just use | |
| * kmalloc in this case. | |
| * | |
| * Don't bother with the vmalloc fallback for allocations of page size | |
| * or less: vmalloc won't do any better. | |
| */ | |
| if (!(gfp_mask & __GFP_NORETRY)) | |
| gfp_mask |= __GFP_NOFAIL; | |
| if (size < PAGE_SIZE && is_power_of_2(size)) | |
| return xfs_buf_alloc_kmem(bp, size, gfp_mask); | |
| return xfs_buf_alloc_folio(bp, size, gfp_mask); | |
| } | |
| static int | |
| xfs_buf_alloc( | |
| struct xfs_buftarg *target, | |
| struct xfs_buf_map *map, | |
| int nmaps, | |
| xfs_buf_flags_t flags, | |
| struct xfs_buf **bpp) | |
| { | |
| struct xfs_buf *bp; | |
| int error; | |
| int i; | |
| *bpp = NULL; | |
| bp = kmem_cache_zalloc(xfs_buf_cache, | |
| GFP_KERNEL | __GFP_NOLOCKDEP | __GFP_NOFAIL); | |
| /* | |
| * We don't want certain flags to appear in b_flags unless they are | |
| * specifically set by later operations on the buffer. | |
| */ | |
| flags &= ~(XBF_TRYLOCK | XBF_ASYNC | XBF_READ_AHEAD); | |
| lockref_init(&bp->b_lockref); | |
| sema_init(&bp->b_sema, 1); /* unlocked */ | |
| atomic_set(&bp->b_lru_ref, 1); | |
| init_completion(&bp->b_iowait); | |
| INIT_LIST_HEAD(&bp->b_lru); | |
| INIT_LIST_HEAD(&bp->b_list); | |
| INIT_LIST_HEAD(&bp->b_li_list); | |
| bp->b_target = target; | |
| bp->b_mount = target->bt_mount; | |
| WRITE_ONCE(bp->b_flags, flags); | |
| bp->b_rhash_key = map[0].bm_bn; | |
| bp->b_length = 0; | |
| bp->b_map_count = nmaps; | |
| if (nmaps == 1) | |
| bp->b_maps = &bp->__b_map; | |
| else | |
| bp->b_maps = kzalloc_objs(struct xfs_buf_map, nmaps, | |
| GFP_KERNEL | __GFP_NOLOCKDEP | __GFP_NOFAIL); | |
| for (i = 0; i < nmaps; i++) { | |
| bp->b_maps[i].bm_bn = map[i].bm_bn; | |
| bp->b_maps[i].bm_len = map[i].bm_len; | |
| bp->b_length += map[i].bm_len; | |
| } | |
| atomic_set(&bp->b_pin_count, 0); | |
| init_waitqueue_head(&bp->b_waiters); | |
| XFS_STATS_INC(bp->b_mount, xb_create); | |
| trace_xfs_buf_init(bp, _RET_IP_); | |
| error = xfs_buf_alloc_backing_mem(bp, flags); | |
| if (error) { | |
| xfs_buf_free(bp); | |
| return error; | |
| } | |
| *bpp = bp; | |
| return 0; | |
| } | |
| /* | |
| * Finding and Reading Buffers | |
| */ | |
| static int | |
| _xfs_buf_obj_cmp( | |
| struct rhashtable_compare_arg *arg, | |
| const void *obj) | |
| { | |
| const struct xfs_buf_map *map = arg->key; | |
| const struct xfs_buf *bp = obj; | |
| /* | |
| * The key hashing in the lookup path depends on the key being the | |
| * first element of the compare_arg, make sure to assert this. | |
| */ | |
| BUILD_BUG_ON(offsetof(struct xfs_buf_map, bm_bn) != 0); | |
| if (bp->b_rhash_key != map->bm_bn) | |
| return 1; | |
| if (unlikely(bp->b_length != map->bm_len)) { | |
| /* | |
| * found a block number match. If the range doesn't | |
| * match, the only way this is allowed is if the buffer | |
| * in the cache is stale and the transaction that made | |
| * it stale has not yet committed. i.e. we are | |
| * reallocating a busy extent. Skip this buffer and | |
| * continue searching for an exact match. | |
| * | |
| * Note: If we're scanning for incore buffers to stale, don't | |
| * complain if we find non-stale buffers. | |
| */ | |
| if (!(map->bm_flags & XBM_LIVESCAN)) | |
| ASSERT(bp->b_flags & XBF_STALE); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static const struct rhashtable_params xfs_buf_hash_params = { | |
| .min_size = 32, /* empty AGs have minimal footprint */ | |
| .nelem_hint = 16, | |
| .key_len = sizeof(xfs_daddr_t), | |
| .key_offset = offsetof(struct xfs_buf, b_rhash_key), | |
| .head_offset = offsetof(struct xfs_buf, b_rhash_head), | |
| .automatic_shrinking = true, | |
| .obj_cmpfn = _xfs_buf_obj_cmp, | |
| }; | |
| static int | |
| xfs_buf_map_verify( | |
| struct xfs_buftarg *btp, | |
| struct xfs_buf_map *map) | |
| { | |
| /* Check for IOs smaller than the sector size / not sector aligned */ | |
| ASSERT(!(BBTOB(map->bm_len) < btp->bt_meta_sectorsize)); | |
| ASSERT(!(BBTOB(map->bm_bn) & (xfs_off_t)btp->bt_meta_sectormask)); | |
| /* | |
| * Corrupted block numbers can get through to here, unfortunately, so we | |
| * have to check that the buffer falls within the filesystem bounds. | |
| */ | |
| if (map->bm_bn < 0 || map->bm_bn >= btp->bt_nr_sectors) { | |
| xfs_alert(btp->bt_mount, | |
| "%s: daddr 0x%llx out of range, EOFS 0x%llx", | |
| __func__, map->bm_bn, btp->bt_nr_sectors); | |
| WARN_ON(1); | |
| return -EFSCORRUPTED; | |
| } | |
| return 0; | |
| } | |
| static int | |
| xfs_buf_find_lock( | |
| struct xfs_buf *bp, | |
| xfs_buf_flags_t flags) | |
| { | |
| if (flags & XBF_TRYLOCK) { | |
| if (!xfs_buf_trylock(bp)) { | |
| XFS_STATS_INC(bp->b_mount, xb_busy_locked); | |
| return -EAGAIN; | |
| } | |
| } else { | |
| xfs_buf_lock(bp); | |
| XFS_STATS_INC(bp->b_mount, xb_get_locked_waited); | |
| } | |
| /* | |
| * if the buffer is stale, clear all the external state associated with | |
| * it. We need to keep flags such as how we allocated the buffer memory | |
| * intact here. | |
| */ | |
| if (bp->b_flags & XBF_STALE) { | |
| if (flags & XBF_LIVESCAN) { | |
| xfs_buf_unlock(bp); | |
| return -ENOENT; | |
| } | |
| ASSERT((bp->b_flags & _XBF_DELWRI_Q) == 0); | |
| xfs_buf_clear_flags(bp, ~_XBF_KMEM); | |
| bp->b_ops = NULL; | |
| } | |
| return 0; | |
| } | |
| static inline struct xfs_buf * | |
| xfs_buf_lookup( | |
| struct xfs_buftarg *btp, | |
| struct xfs_buf_map *map) | |
| { | |
| struct xfs_buf *bp; | |
| rcu_read_lock(); | |
| bp = rhashtable_lookup(&btp->bt_hash, map, xfs_buf_hash_params); | |
| if (!bp || !lockref_get_not_dead(&bp->b_lockref)) { | |
| rcu_read_unlock(); | |
| XFS_STATS_INC(btp->bt_mount, xb_miss_locked); | |
| return NULL; | |
| } | |
| rcu_read_unlock(); | |
| trace_xfs_buf_find(bp, _RET_IP_); | |
| XFS_STATS_INC(btp->bt_mount, xb_get_locked); | |
| return bp; | |
| } | |
| /* | |
| * Insert the new_bp into the hash table. This consumes the perag reference | |
| * taken for the lookup regardless of the result of the insert. | |
| */ | |
| static int | |
| xfs_buf_find_insert( | |
| struct xfs_buftarg *btp, | |
| struct xfs_buf_map *cmap, | |
| struct xfs_buf_map *map, | |
| int nmaps, | |
| xfs_buf_flags_t flags, | |
| struct xfs_buf **bpp) | |
| { | |
| struct xfs_buf *new_bp; | |
| struct xfs_buf *bp; | |
| int error; | |
| error = xfs_buf_alloc(btp, map, nmaps, flags, &new_bp); | |
| if (error) | |
| return error; | |
| /* The new buffer keeps the perag reference until it is freed. */ | |
| if (!xfs_buftarg_is_mem(btp)) { | |
| new_bp->b_pag = xfs_perag_get(btp->bt_mount, | |
| xfs_daddr_to_agno(btp->bt_mount, cmap->bm_bn)); | |
| } | |
| retry: | |
| rcu_read_lock(); | |
| bp = rhashtable_lookup_get_insert_fast(&btp->bt_hash, | |
| &new_bp->b_rhash_head, xfs_buf_hash_params); | |
| if (IS_ERR(bp)) { | |
| rcu_read_unlock(); | |
| error = PTR_ERR(bp); | |
| goto out_free_buf; | |
| } | |
| if (bp) { | |
| /* | |
| * If there is an existing buffer with a dead lockref, retry | |
| * until the new buffer is added, or a usable buffer is found. | |
| */ | |
| if (!lockref_get_not_dead(&bp->b_lockref)) { | |
| rcu_read_unlock(); | |
| cpu_relax(); | |
| goto retry; | |
| } | |
| rcu_read_unlock(); | |
| *bpp = bp; | |
| goto out_free_buf; | |
| } | |
| rcu_read_unlock(); | |
| *bpp = new_bp; | |
| return 0; | |
| out_free_buf: | |
| if (new_bp->b_pag) | |
| xfs_perag_put(new_bp->b_pag); | |
| xfs_buf_free(new_bp); | |
| return error; | |
| } | |
| /* | |
| * Assembles a buffer covering the specified range. The code is optimised for | |
| * cache hits, as metadata intensive workloads will see 3 orders of magnitude | |
| * more hits than misses. | |
| */ | |
| static int | |
| xfs_find_get_buf( | |
| struct xfs_buftarg *btp, | |
| struct xfs_buf_map *map, | |
| int nmaps, | |
| xfs_buf_flags_t flags, | |
| struct xfs_buf **bpp) | |
| { | |
| struct xfs_buf *bp = NULL; | |
| struct xfs_buf_map cmap = { .bm_bn = map[0].bm_bn }; | |
| int error; | |
| int i; | |
| if (flags & XBF_LIVESCAN) | |
| cmap.bm_flags |= XBM_LIVESCAN; | |
| for (i = 0; i < nmaps; i++) | |
| cmap.bm_len += map[i].bm_len; | |
| error = xfs_buf_map_verify(btp, &cmap); | |
| if (error) | |
| return error; | |
| /* cache hits always outnumber misses by at least 10:1 */ | |
| bp = xfs_buf_lookup(btp, &cmap); | |
| if (unlikely(!bp)) { | |
| if (flags & XBF_INCORE) | |
| return -ENOENT; | |
| error = xfs_buf_find_insert(btp, &cmap, map, nmaps, flags, &bp); | |
| if (error) | |
| return error; | |
| } | |
| *bpp = bp; | |
| return 0; | |
| } | |
| int | |
| xfs_buf_get_map( | |
| struct xfs_buftarg *btp, | |
| struct xfs_buf_map *map, | |
| int nmaps, | |
| xfs_buf_flags_t flags, | |
| struct xfs_buf **bpp) | |
| { | |
| int error; | |
| ASSERT(!(flags & ~(XBF_TRYLOCK | XBF_INCORE | XBF_LIVESCAN))); | |
| ASSERT(!(flags & XBF_LIVESCAN) || (flags & XBF_INCORE)); | |
| /* | |
| * Zero the buffer and clear b_error as xfs_buf_get_map callers don't | |
| * expect valid data to be found in the buffer. | |
| */ | |
| error = xfs_find_get_buf(btp, map, nmaps, flags, bpp); | |
| if (error) | |
| return error; | |
| error = xfs_buf_find_lock(*bpp, flags); | |
| if (error) { | |
| xfs_buf_rele(*bpp); | |
| return error; | |
| } | |
| XFS_STATS_INC(btp->bt_mount, xb_get); | |
| trace_xfs_buf_get(*bpp, flags, _RET_IP_); | |
| xfs_buf_ioerror(*bpp, 0); | |
| return 0; | |
| } | |
| int | |
| _xfs_buf_read( | |
| struct xfs_buf *bp) | |
| { | |
| ASSERT(bp->b_maps[0].bm_bn != XFS_BUF_DADDR_NULL); | |
| xfs_buf_clear_flags(bp, XBF_WRITE | XBF_ASYNC | XBF_READ_AHEAD | | |
| XBF_DONE); | |
| xfs_buf_set_flags(bp, XBF_READ); | |
| xfs_buf_submit(bp); | |
| return xfs_buf_iowait(bp); | |
| } | |
| int | |
| xfs_buf_read_map( | |
| struct xfs_buftarg *target, | |
| struct xfs_buf_map *map, | |
| int nmaps, | |
| xfs_buf_flags_t flags, | |
| struct xfs_buf **bpp, | |
| const struct xfs_buf_ops *ops, | |
| xfs_failaddr_t fa) | |
| { | |
| struct xfs_buf *bp; | |
| int error; | |
| ASSERT(!(flags & ~XBF_TRYLOCK)); | |
| flags |= XBF_READ; | |
| *bpp = NULL; | |
| error = xfs_find_get_buf(target, map, nmaps, flags, &bp); | |
| if (error) | |
| return error; | |
| error = xfs_buf_find_lock(bp, flags); | |
| if (error) { | |
| xfs_buf_rele(bp); | |
| return error; | |
| } | |
| trace_xfs_buf_read(bp, flags, _RET_IP_); | |
| if (bp->b_flags & XBF_DONE) { | |
| ASSERT(bp->b_error == 0); | |
| /* | |
| * If the caller passed an ops structure and the buffer doesn't | |
| * have ops assigned yet, set the ops and use them to verify the | |
| * buffer contents. | |
| * | |
| * Under normal operations, every in-core buffer is verified on | |
| * read I/O completion, but there are two scenarios that can | |
| * lead to in-core buffers without an assigned ->b_ops: | |
| * | |
| * 1) During log recovery of buffers on a V4 filesystem. | |
| * These buffers are purged at the end of recovery, though. | |
| * 2) Oonline repair intentionally reads with a NULL buffer | |
| * ops to run several verifiers across an in-core buffer in | |
| * order to establish buffer type. If repair can't | |
| * establish that, the buffer will be left in memory with | |
| * NULL buffer ops. | |
| */ | |
| if (ops && !bp->b_ops) { | |
| bp->b_ops = ops; | |
| bp->b_ops->verify_read(bp); | |
| /* | |
| * If verification failed, clear XBF_DONE as we assume | |
| * that buffers have no recorded errors when in XBF_DONE | |
| * state. | |
| */ | |
| error = bp->b_error; | |
| if (error) | |
| xfs_buf_clear_flags(bp, XBF_DONE); | |
| } | |
| /* We do not want read in the flags */ | |
| xfs_buf_clear_flags(bp, XBF_READ); | |
| } else { | |
| /* Initiate the buffer read and wait. */ | |
| XFS_STATS_INC(target->bt_mount, xb_get_read); | |
| bp->b_ops = ops; | |
| error = _xfs_buf_read(bp); | |
| } | |
| if (error) | |
| goto out_ioerror; | |
| *bpp = bp; | |
| return 0; | |
| out_ioerror: | |
| /* | |
| * Check against log shutdown for error reporting because metadata | |
| * writeback may require a read first and we need to report errors in | |
| * metadata writeback until the log is shut down. High level | |
| * transaction read functions already check against mount shutdown, so | |
| * we only need to be concerned about low level/ IO interactions here. | |
| */ | |
| if (!xlog_is_shutdown(target->bt_mount->m_log)) | |
| xfs_buf_ioerror_alert(bp, fa); | |
| /* | |
| * If we've had a read error, then the contents of the buffer are | |
| * invalid and should not be used. To ensure that a followup read tries | |
| * to pull the buffer from disk again, we clear the XBF_DONE flag and | |
| * mark the buffer stale. This ensures that anyone who has a current | |
| * reference to the buffer will interpret it's contents correctly and | |
| * future cache lookups will also treat it as an empty, uninitialised | |
| * buffer. | |
| */ | |
| xfs_buf_clear_flags(bp, XBF_DONE); | |
| xfs_buf_stale(bp); | |
| xfs_buf_relse(bp); | |
| /* bad CRC means corrupted metadata */ | |
| if (error == -EFSBADCRC) | |
| return -EFSCORRUPTED; | |
| return error; | |
| } | |
| /* | |
| * If we are not low on memory then do the readahead in a deadlock | |
| * safe manner. | |
| */ | |
| void | |
| xfs_buf_readahead_map( | |
| struct xfs_buftarg *target, | |
| struct xfs_buf_map *map, | |
| int nmaps, | |
| const struct xfs_buf_ops *ops) | |
| { | |
| const xfs_buf_flags_t flags = XBF_READ | XBF_ASYNC | XBF_READ_AHEAD; | |
| struct xfs_buf *bp; | |
| /* | |
| * Currently we don't have a good means or justification for performing | |
| * xmbuf_map_page asynchronously, so we don't do readahead. | |
| */ | |
| if (xfs_buftarg_is_mem(target)) | |
| return; | |
| if (xfs_find_get_buf(target, map, nmaps, flags, &bp)) | |
| return; | |
| /* | |
| * Do a lockless fast path check for a valid uptodate buffer and avoid | |
| * locking entirely in this case. | |
| */ | |
| if ((READ_ONCE(bp->b_flags) & (XBF_DONE | XBF_STALE)) == XBF_DONE) | |
| goto out_rele; | |
| /* Otherwise lock the buffer to stabilize the state */ | |
| if (!xfs_buf_trylock(bp)) | |
| goto out_rele; | |
| /* Let the actual reader deal with stale buffers. */ | |
| if (bp->b_flags & (XBF_STALE | XBF_DONE)) | |
| goto out_unlock; | |
| trace_xfs_buf_readahead(bp, 0, _RET_IP_); | |
| XFS_STATS_INC(target->bt_mount, xb_get_read); | |
| bp->b_ops = ops; | |
| xfs_buf_clear_flags(bp, XBF_WRITE | XBF_DONE); | |
| xfs_buf_set_flags(bp, flags); | |
| percpu_counter_inc(&target->bt_readahead_count); | |
| xfs_buf_submit(bp); | |
| return; | |
| out_unlock: | |
| xfs_buf_unlock(bp); | |
| out_rele: | |
| xfs_buf_rele(bp); | |
| } | |
| /* | |
| * Read an uncached buffer from disk. Allocates and returns a locked | |
| * buffer containing the disk contents or nothing. Uncached buffers always have | |
| * a cache index of XFS_BUF_DADDR_NULL so we can easily determine if the buffer | |
| * is cached or uncached during fault diagnosis. | |
| */ | |
| int | |
| xfs_buf_read_uncached( | |
| struct xfs_buftarg *target, | |
| xfs_daddr_t daddr, | |
| size_t numblks, | |
| struct xfs_buf **bpp, | |
| const struct xfs_buf_ops *ops) | |
| { | |
| struct xfs_buf *bp; | |
| int error; | |
| *bpp = NULL; | |
| error = xfs_buf_get_uncached(target, numblks, &bp); | |
| if (error) | |
| return error; | |
| /* set up the buffer for a read IO */ | |
| ASSERT(bp->b_map_count == 1); | |
| bp->b_rhash_key = XFS_BUF_DADDR_NULL; | |
| bp->b_maps[0].bm_bn = daddr; | |
| xfs_buf_set_flags(bp, XBF_READ); | |
| bp->b_ops = ops; | |
| xfs_buf_submit(bp); | |
| error = xfs_buf_iowait(bp); | |
| if (error) { | |
| xfs_buf_relse(bp); | |
| return error; | |
| } | |
| *bpp = bp; | |
| return 0; | |
| } | |
| int | |
| xfs_buf_get_uncached( | |
| struct xfs_buftarg *target, | |
| size_t numblks, | |
| struct xfs_buf **bpp) | |
| { | |
| int error; | |
| DEFINE_SINGLE_BUF_MAP(map, XFS_BUF_DADDR_NULL, numblks); | |
| error = xfs_buf_alloc(target, &map, 1, 0, bpp); | |
| if (error) | |
| return error; | |
| xfs_buf_lock(*bpp); | |
| trace_xfs_buf_get_uncached(*bpp, _RET_IP_); | |
| return 0; | |
| } | |
| /* | |
| * Increment reference count on buffer, to hold the buffer concurrently | |
| * with another thread which may release (free) the buffer asynchronously. | |
| * Must hold the buffer already to call this function. | |
| */ | |
| void | |
| xfs_buf_hold( | |
| struct xfs_buf *bp) | |
| { | |
| trace_xfs_buf_hold(bp, _RET_IP_); | |
| lockref_get(&bp->b_lockref); | |
| } | |
| static void | |
| xfs_buf_destroy( | |
| struct xfs_buf *bp) | |
| { | |
| ASSERT(lockref_is_dead(&bp->b_lockref)); | |
| ASSERT(!(bp->b_flags & _XBF_DELWRI_Q)); | |
| if (bp->b_pag) | |
| xfs_perag_put(bp->b_pag); | |
| xfs_buf_free(bp); | |
| } | |
| static inline void | |
| xfs_buf_kill( | |
| struct xfs_buf *bp) | |
| { | |
| lockref_mark_dead(&bp->b_lockref); | |
| if (!xfs_buf_is_uncached(bp)) { | |
| rhashtable_remove_fast(&bp->b_target->bt_hash, | |
| &bp->b_rhash_head, xfs_buf_hash_params); | |
| } | |
| } | |
| /* | |
| * Release a hold on the specified buffer. | |
| */ | |
| void | |
| xfs_buf_rele( | |
| struct xfs_buf *bp) | |
| { | |
| trace_xfs_buf_rele(bp, _RET_IP_); | |
| if (lockref_put_or_lock(&bp->b_lockref)) | |
| return; | |
| if (!--bp->b_lockref.count) { | |
| if (xfs_buf_is_uncached(bp) || !atomic_read(&bp->b_lru_ref)) | |
| goto kill; | |
| list_lru_add_obj(&bp->b_target->bt_lru, &bp->b_lru); | |
| } | |
| spin_unlock(&bp->b_lockref.lock); | |
| return; | |
| kill: | |
| xfs_buf_kill(bp); | |
| list_lru_del_obj(&bp->b_target->bt_lru, &bp->b_lru); | |
| spin_unlock(&bp->b_lockref.lock); | |
| xfs_buf_destroy(bp); | |
| } | |
| /* | |
| * Lock a buffer object, if it is not already locked. | |
| * | |
| * If we come across a stale, pinned, locked buffer, we know that we are | |
| * being asked to lock a buffer that has been reallocated. Because it is | |
| * pinned, we know that the log has not been pushed to disk and hence it | |
| * will still be locked. Rather than continuing to have trylock attempts | |
| * fail until someone else pushes the log, push it ourselves before | |
| * returning. This means that the xfsaild will not get stuck trying | |
| * to push on stale inode buffers. | |
| */ | |
| int | |
| xfs_buf_trylock( | |
| struct xfs_buf *bp) | |
| { | |
| int locked; | |
| locked = down_trylock(&bp->b_sema) == 0; | |
| if (locked) | |
| trace_xfs_buf_trylock(bp, _RET_IP_); | |
| else | |
| trace_xfs_buf_trylock_fail(bp, _RET_IP_); | |
| return locked; | |
| } | |
| /* | |
| * Lock a buffer object. | |
| * | |
| * If we come across a stale, pinned, locked buffer, we know that we | |
| * are being asked to lock a buffer that has been reallocated. Because | |
| * it is pinned, we know that the log has not been pushed to disk and | |
| * hence it will still be locked. Rather than sleeping until someone | |
| * else pushes the log, push it ourselves before trying to get the lock. | |
| */ | |
| void | |
| xfs_buf_lock( | |
| struct xfs_buf *bp) | |
| { | |
| trace_xfs_buf_lock(bp, _RET_IP_); | |
| if (atomic_read(&bp->b_pin_count) && (bp->b_flags & XBF_STALE)) | |
| xfs_log_force(bp->b_mount, 0); | |
| down(&bp->b_sema); | |
| trace_xfs_buf_lock_done(bp, _RET_IP_); | |
| } | |
| void | |
| xfs_buf_unlock( | |
| struct xfs_buf *bp) | |
| { | |
| ASSERT(xfs_buf_islocked(bp)); | |
| up(&bp->b_sema); | |
| trace_xfs_buf_unlock(bp, _RET_IP_); | |
| } | |
| STATIC void | |
| xfs_buf_wait_unpin( | |
| struct xfs_buf *bp) | |
| { | |
| DECLARE_WAITQUEUE (wait, current); | |
| if (atomic_read(&bp->b_pin_count) == 0) | |
| return; | |
| add_wait_queue(&bp->b_waiters, &wait); | |
| for (;;) { | |
| set_current_state(TASK_UNINTERRUPTIBLE); | |
| if (atomic_read(&bp->b_pin_count) == 0) | |
| break; | |
| io_schedule(); | |
| } | |
| remove_wait_queue(&bp->b_waiters, &wait); | |
| set_current_state(TASK_RUNNING); | |
| } | |
| static void | |
| xfs_buf_ioerror_alert_ratelimited( | |
| struct xfs_buf *bp) | |
| { | |
| static unsigned long lasttime; | |
| static struct xfs_buftarg *lasttarg; | |
| if (bp->b_target != lasttarg || | |
| time_after(jiffies, (lasttime + 5*HZ))) { | |
| lasttime = jiffies; | |
| xfs_buf_ioerror_alert(bp, __this_address); | |
| } | |
| lasttarg = bp->b_target; | |
| } | |
| /* | |
| * Account for this latest trip around the retry handler, and decide if | |
| * we've failed enough times to constitute a permanent failure. | |
| */ | |
| static bool | |
| xfs_buf_ioerror_permanent( | |
| struct xfs_buf *bp, | |
| struct xfs_error_cfg *cfg) | |
| { | |
| struct xfs_mount *mp = bp->b_mount; | |
| if (cfg->max_retries != XFS_ERR_RETRY_FOREVER && | |
| ++bp->b_retries > cfg->max_retries) | |
| return true; | |
| if (cfg->retry_timeout != XFS_ERR_RETRY_FOREVER && | |
| time_after(jiffies, cfg->retry_timeout + bp->b_first_retry_time)) | |
| return true; | |
| /* At unmount we may treat errors differently */ | |
| if (xfs_is_unmounting(mp) && mp->m_fail_unmount) | |
| return true; | |
| return false; | |
| } | |
| /* | |
| * On a sync write or shutdown we just want to stale the buffer and let the | |
| * caller handle the error in bp->b_error appropriately. | |
| * | |
| * If the write was asynchronous then no one will be looking for the error. If | |
| * this is the first failure of this type, clear the error state and write the | |
| * buffer out again. This means we always retry an async write failure at least | |
| * once, but we also need to set the buffer up to behave correctly now for | |
| * repeated failures. | |
| * | |
| * If we get repeated async write failures, then we take action according to the | |
| * error configuration we have been set up to use. | |
| * | |
| * Returns true if this function took care of error handling and the caller must | |
| * not touch the buffer again. Return false if the caller should proceed with | |
| * normal I/O completion handling. | |
| */ | |
| static bool | |
| xfs_buf_ioend_handle_error( | |
| struct xfs_buf *bp) | |
| { | |
| struct xfs_mount *mp = bp->b_mount; | |
| struct xfs_error_cfg *cfg; | |
| struct xfs_log_item *lip; | |
| /* | |
| * If we've already shutdown the journal because of I/O errors, there's | |
| * no point in giving this a retry. | |
| */ | |
| if (xlog_is_shutdown(mp->m_log)) | |
| goto out_stale; | |
| xfs_buf_ioerror_alert_ratelimited(bp); | |
| /* | |
| * We're not going to bother about retrying this during recovery. | |
| * One strike! | |
| */ | |
| if (mp->m_log && xlog_in_recovery(mp->m_log)) { | |
| xfs_force_shutdown(mp, SHUTDOWN_META_IO_ERROR); | |
| return false; | |
| } | |
| /* | |
| * Synchronous writes will have callers process the error. | |
| */ | |
| if (!(bp->b_flags & XBF_ASYNC)) | |
| goto out_stale; | |
| trace_xfs_buf_iodone_async(bp, _RET_IP_); | |
| cfg = xfs_error_get_cfg(mp, XFS_ERR_METADATA, bp->b_error); | |
| if (bp->b_last_error != bp->b_error || | |
| !(bp->b_flags & (XBF_STALE | XBF_WRITE_FAIL))) { | |
| bp->b_last_error = bp->b_error; | |
| if (cfg->retry_timeout != XFS_ERR_RETRY_FOREVER && | |
| !bp->b_first_retry_time) | |
| bp->b_first_retry_time = jiffies; | |
| goto resubmit; | |
| } | |
| /* | |
| * Permanent error - we need to trigger a shutdown if we haven't already | |
| * to indicate that inconsistency will result from this action. | |
| */ | |
| if (xfs_buf_ioerror_permanent(bp, cfg)) { | |
| xfs_force_shutdown(mp, SHUTDOWN_META_IO_ERROR); | |
| goto out_stale; | |
| } | |
| /* Still considered a transient error. Caller will schedule retries. */ | |
| list_for_each_entry(lip, &bp->b_li_list, li_bio_list) { | |
| set_bit(XFS_LI_FAILED, &lip->li_flags); | |
| clear_bit(XFS_LI_FLUSHING, &lip->li_flags); | |
| } | |
| xfs_buf_ioerror(bp, 0); | |
| xfs_buf_relse(bp); | |
| return true; | |
| resubmit: | |
| xfs_buf_ioerror(bp, 0); | |
| xfs_buf_set_flags(bp, XBF_DONE | XBF_WRITE_FAIL); | |
| reinit_completion(&bp->b_iowait); | |
| xfs_buf_submit(bp); | |
| return true; | |
| out_stale: | |
| xfs_buf_stale(bp); | |
| xfs_buf_set_flags(bp, XBF_DONE); | |
| xfs_buf_clear_flags(bp, XBF_WRITE); | |
| trace_xfs_buf_error_relse(bp, _RET_IP_); | |
| return false; | |
| } | |
| /* | |
| * Complete a buffer read or write. | |
| * | |
| * Releases the buffer if the I/O was asynchronous. | |
| */ | |
| static void | |
| xfs_buf_ioend( | |
| struct xfs_buf *bp) | |
| { | |
| bool async = bp->b_flags & XBF_ASYNC; | |
| trace_xfs_buf_iodone(bp, _RET_IP_); | |
| if (bp->b_flags & XBF_READ) { | |
| if (!bp->b_error && is_vmalloc_addr(bp->b_addr)) | |
| invalidate_kernel_vmap_range(bp->b_addr, | |
| roundup(BBTOB(bp->b_length), PAGE_SIZE)); | |
| if (!bp->b_error && bp->b_ops) | |
| bp->b_ops->verify_read(bp); | |
| if (!bp->b_error) | |
| xfs_buf_set_flags(bp, XBF_DONE); | |
| if (bp->b_flags & XBF_READ_AHEAD) | |
| percpu_counter_dec(&bp->b_target->bt_readahead_count); | |
| } else { | |
| if (unlikely(bp->b_error)) { | |
| if (xfs_buf_ioend_handle_error(bp)) { | |
| ASSERT(async); | |
| return; | |
| } | |
| } else { | |
| xfs_buf_clear_flags(bp, XBF_WRITE_FAIL); | |
| xfs_buf_set_flags(bp, XBF_DONE); | |
| } | |
| /* clear the retry state */ | |
| bp->b_last_error = 0; | |
| bp->b_retries = 0; | |
| bp->b_first_retry_time = 0; | |
| /* | |
| * Note that for things like remote attribute buffers, there may | |
| * not be a buffer log item here, so processing the buffer log | |
| * item must remain optional. | |
| */ | |
| if (bp->b_log_item) | |
| xfs_buf_item_done(bp); | |
| if (bp->b_iodone) | |
| bp->b_iodone(bp); | |
| } | |
| xfs_buf_clear_flags(bp, XBF_READ | XBF_WRITE | XBF_READ_AHEAD); | |
| if (async) | |
| xfs_buf_relse(bp); | |
| } | |
| static void | |
| xfs_buf_ioend_work( | |
| struct work_struct *work) | |
| { | |
| xfs_buf_ioend(container_of(work, struct xfs_buf, b_ioend_work)); | |
| } | |
| void | |
| __xfs_buf_ioerror( | |
| struct xfs_buf *bp, | |
| int error, | |
| xfs_failaddr_t failaddr) | |
| { | |
| ASSERT(error <= 0 && error >= -1000); | |
| bp->b_error = error; | |
| trace_xfs_buf_ioerror(bp, error, failaddr); | |
| } | |
| void | |
| xfs_buf_ioerror_alert( | |
| struct xfs_buf *bp, | |
| xfs_failaddr_t func) | |
| { | |
| xfs_buf_alert_ratelimited(bp, "XFS: metadata IO error", | |
| "metadata I/O error in \"%pS\" at daddr 0x%llx len %d error %d", | |
| func, (uint64_t)xfs_buf_daddr(bp), | |
| bp->b_length, -bp->b_error); | |
| } | |
| /* | |
| * Fail a locked and referenced buffer outside the I/O path. | |
| * | |
| * The caller transfers a reference which will be released after processing the | |
| * error. | |
| */ | |
| void | |
| xfs_buf_fail( | |
| struct xfs_buf *bp) | |
| { | |
| ASSERT(xfs_buf_islocked(bp)); | |
| xfs_buf_set_flags(bp, XBF_ASYNC); | |
| xfs_buf_clear_flags(bp, XBF_DONE); | |
| xfs_buf_stale(bp); | |
| xfs_buf_ioerror(bp, -EIO); | |
| xfs_buf_ioend(bp); | |
| } | |
| int | |
| xfs_bwrite( | |
| struct xfs_buf *bp) | |
| { | |
| int error; | |
| ASSERT(xfs_buf_islocked(bp)); | |
| xfs_buf_set_flags(bp, XBF_WRITE); | |
| xfs_buf_clear_flags(bp, XBF_ASYNC | XBF_READ | _XBF_DELWRI_Q | | |
| XBF_DONE); | |
| xfs_buf_submit(bp); | |
| error = xfs_buf_iowait(bp); | |
| if (error) | |
| xfs_force_shutdown(bp->b_mount, SHUTDOWN_META_IO_ERROR); | |
| return error; | |
| } | |
| static void | |
| xfs_buf_bio_end_io( | |
| struct bio *bio) | |
| { | |
| struct xfs_buf *bp = bio->bi_private; | |
| if (bio->bi_status) | |
| xfs_buf_ioerror(bp, blk_status_to_errno(bio->bi_status)); | |
| else if ((bp->b_flags & XBF_WRITE) && (bp->b_flags & XBF_ASYNC) && | |
| XFS_TEST_ERROR(bp->b_mount, XFS_ERRTAG_BUF_IOERROR)) | |
| xfs_buf_ioerror(bp, -EIO); | |
| if (bp->b_flags & XBF_ASYNC) { | |
| INIT_WORK(&bp->b_ioend_work, xfs_buf_ioend_work); | |
| queue_work(bp->b_mount->m_buf_workqueue, &bp->b_ioend_work); | |
| } else { | |
| complete(&bp->b_iowait); | |
| } | |
| bio_put(bio); | |
| } | |
| static inline blk_opf_t | |
| xfs_buf_bio_op( | |
| struct xfs_buf *bp) | |
| { | |
| blk_opf_t op; | |
| if (bp->b_flags & XBF_WRITE) { | |
| op = REQ_OP_WRITE; | |
| } else { | |
| op = REQ_OP_READ; | |
| if (bp->b_flags & XBF_READ_AHEAD) | |
| op |= REQ_RAHEAD; | |
| } | |
| return op | REQ_META; | |
| } | |
| static void | |
| xfs_buf_submit_bio( | |
| struct xfs_buf *bp) | |
| { | |
| unsigned int len = BBTOB(bp->b_length); | |
| unsigned int nr_vecs = bio_add_max_vecs(bp->b_addr, len); | |
| unsigned int map = 0; | |
| struct blk_plug plug; | |
| struct bio *bio; | |
| bio = bio_alloc(bp->b_target->bt_bdev, nr_vecs, xfs_buf_bio_op(bp), | |
| GFP_NOIO); | |
| if (is_vmalloc_addr(bp->b_addr)) | |
| bio_add_vmalloc(bio, bp->b_addr, len); | |
| else | |
| bio_add_virt_nofail(bio, bp->b_addr, len); | |
| bio->bi_private = bp; | |
| bio->bi_end_io = xfs_buf_bio_end_io; | |
| /* | |
| * If there is more than one map segment, split out a new bio for each | |
| * map except of the last one. The last map is handled by the | |
| * remainder of the original bio outside the loop. | |
| */ | |
| blk_start_plug(&plug); | |
| for (map = 0; map < bp->b_map_count - 1; map++) { | |
| struct bio *split; | |
| split = bio_split(bio, bp->b_maps[map].bm_len, GFP_NOFS, | |
| &fs_bio_set); | |
| split->bi_iter.bi_sector = bp->b_maps[map].bm_bn; | |
| bio_chain(split, bio); | |
| submit_bio(split); | |
| } | |
| bio->bi_iter.bi_sector = bp->b_maps[map].bm_bn; | |
| submit_bio(bio); | |
| blk_finish_plug(&plug); | |
| } | |
| /* | |
| * Wait for I/O completion of a sync buffer and return the I/O error code. | |
| */ | |
| static int | |
| xfs_buf_iowait( | |
| struct xfs_buf *bp) | |
| { | |
| ASSERT(!(bp->b_flags & XBF_ASYNC)); | |
| trace_xfs_buf_iowait(bp, _RET_IP_); | |
| wait_for_completion(&bp->b_iowait); | |
| trace_xfs_buf_iowait_done(bp, _RET_IP_); | |
| xfs_buf_ioend(bp); | |
| return bp->b_error; | |
| } | |
| /* | |
| * Run the write verifier callback function if it exists. If this fails, mark | |
| * the buffer with an error and do not dispatch the I/O. | |
| */ | |
| static bool | |
| xfs_buf_verify_write( | |
| struct xfs_buf *bp) | |
| { | |
| if (bp->b_ops) { | |
| bp->b_ops->verify_write(bp); | |
| if (bp->b_error) | |
| return false; | |
| } else if (bp->b_rhash_key != XFS_BUF_DADDR_NULL) { | |
| /* | |
| * Non-crc filesystems don't attach verifiers during log | |
| * recovery, so don't warn for such filesystems. | |
| */ | |
| if (xfs_has_crc(bp->b_mount)) { | |
| xfs_warn(bp->b_mount, | |
| "%s: no buf ops on daddr 0x%llx len %d", | |
| __func__, xfs_buf_daddr(bp), | |
| bp->b_length); | |
| xfs_hex_dump(bp->b_addr, XFS_CORRUPTION_DUMP_LEN); | |
| dump_stack(); | |
| } | |
| } | |
| return true; | |
| } | |
| /* | |
| * Buffer I/O submission path, read or write. Asynchronous submission transfers | |
| * the buffer lock ownership and the current reference to the IO. It is not | |
| * safe to reference the buffer after a call to this function unless the caller | |
| * holds an additional reference itself. | |
| */ | |
| static void | |
| xfs_buf_submit( | |
| struct xfs_buf *bp) | |
| { | |
| trace_xfs_buf_submit(bp, _RET_IP_); | |
| ASSERT(!(bp->b_flags & _XBF_DELWRI_Q)); | |
| /* | |
| * On log shutdown we stale and complete the buffer immediately. We can | |
| * be called to read the superblock before the log has been set up, so | |
| * be careful checking the log state. | |
| * | |
| * Checking the mount shutdown state here can result in the log tail | |
| * moving inappropriately on disk as the log may not yet be shut down. | |
| * i.e. failing this buffer on mount shutdown can remove it from the AIL | |
| * and move the tail of the log forwards without having written this | |
| * buffer to disk. This corrupts the log tail state in memory, and | |
| * because the log may not be shut down yet, it can then be propagated | |
| * to disk before the log is shutdown. Hence we check log shutdown | |
| * state here rather than mount state to avoid corrupting the log tail | |
| * on shutdown. | |
| */ | |
| if (bp->b_mount->m_log && xlog_is_shutdown(bp->b_mount->m_log)) { | |
| xfs_buf_ioerror(bp, -EIO); | |
| goto ioerror; | |
| } | |
| if (bp->b_flags & XBF_WRITE) | |
| xfs_buf_wait_unpin(bp); | |
| /* | |
| * Make sure we capture only current IO errors rather than stale errors | |
| * left over from previous use of the buffer (e.g. failed readahead). | |
| */ | |
| bp->b_error = 0; | |
| if ((bp->b_flags & XBF_WRITE) && !xfs_buf_verify_write(bp)) { | |
| /* ->verify_write should have set b_error already */ | |
| xfs_force_shutdown(bp->b_mount, SHUTDOWN_CORRUPT_INCORE); | |
| goto ioerror; | |
| } | |
| /* In-memory targets are directly mapped, no I/O required. */ | |
| if (xfs_buftarg_is_mem(bp->b_target)) | |
| goto end_io; | |
| xfs_buf_submit_bio(bp); | |
| return; | |
| ioerror: | |
| xfs_buf_clear_flags(bp, XBF_DONE); | |
| xfs_buf_stale(bp); | |
| end_io: | |
| if (bp->b_flags & XBF_ASYNC) | |
| xfs_buf_ioend(bp); | |
| else | |
| complete(&bp->b_iowait); | |
| } | |
| /* | |
| * Log a message about and stale a buffer that a caller has decided is corrupt. | |
| * | |
| * This function should be called for the kinds of metadata corruption that | |
| * cannot be detect from a verifier, such as incorrect inter-block relationship | |
| * data. Do /not/ call this function from a verifier function. | |
| * | |
| * The buffer must be XBF_DONE prior to the call. Afterwards, the buffer will | |
| * be marked stale, but b_error will not be set. The caller is responsible for | |
| * releasing the buffer or fixing it. | |
| */ | |
| void | |
| __xfs_buf_mark_corrupt( | |
| struct xfs_buf *bp, | |
| xfs_failaddr_t fa) | |
| { | |
| ASSERT(bp->b_flags & XBF_DONE); | |
| xfs_buf_corruption_error(bp, fa); | |
| xfs_buf_stale(bp); | |
| } | |
| /* | |
| * Handling of buffer targets (buftargs). | |
| */ | |
| /* | |
| * Wait for any bufs with callbacks that have been submitted but have not yet | |
| * returned. These buffers will have an elevated hold count, so wait on those | |
| * while freeing all the buffers only held by the LRU. | |
| */ | |
| static enum lru_status | |
| xfs_buftarg_drain_rele( | |
| struct list_head *item, | |
| struct list_lru_one *lru, | |
| void *arg) | |
| { | |
| struct xfs_buf *bp = container_of(item, struct xfs_buf, b_lru); | |
| struct list_head *dispose = arg; | |
| if (!spin_trylock(&bp->b_lockref.lock)) | |
| return LRU_SKIP; | |
| if (bp->b_lockref.count > 0) { | |
| /* need to wait, so skip it this pass */ | |
| spin_unlock(&bp->b_lockref.lock); | |
| trace_xfs_buf_drain_buftarg(bp, _RET_IP_); | |
| return LRU_SKIP; | |
| } | |
| xfs_buf_kill(bp); | |
| list_lru_isolate_move(lru, item, dispose); | |
| spin_unlock(&bp->b_lockref.lock); | |
| return LRU_REMOVED; | |
| } | |
| /* | |
| * Wait for outstanding I/O on the buftarg to complete. | |
| */ | |
| void | |
| xfs_buftarg_wait( | |
| struct xfs_buftarg *btp) | |
| { | |
| /* | |
| * First wait for all in-flight readahead buffers to be released. This is | |
| * critical as new buffers do not make the LRU until they are released. | |
| * | |
| * Next, flush the buffer workqueue to ensure all completion processing | |
| * has finished. Just waiting on buffer locks is not sufficient for | |
| * async IO as the reference count held over IO is not released until | |
| * after the buffer lock is dropped. Hence we need to ensure here that | |
| * all reference counts have been dropped before we start walking the | |
| * LRU list. | |
| */ | |
| while (percpu_counter_sum(&btp->bt_readahead_count)) | |
| delay(100); | |
| flush_workqueue(btp->bt_mount->m_buf_workqueue); | |
| } | |
| void | |
| xfs_buftarg_drain( | |
| struct xfs_buftarg *btp) | |
| { | |
| LIST_HEAD(dispose); | |
| int loop = 0; | |
| bool write_fail = false; | |
| xfs_buftarg_wait(btp); | |
| /* loop until there is nothing left on the lru list. */ | |
| while (list_lru_count(&btp->bt_lru)) { | |
| list_lru_walk(&btp->bt_lru, xfs_buftarg_drain_rele, | |
| &dispose, LONG_MAX); | |
| while (!list_empty(&dispose)) { | |
| struct xfs_buf *bp; | |
| bp = list_first_entry(&dispose, struct xfs_buf, b_lru); | |
| list_del_init(&bp->b_lru); | |
| if (bp->b_flags & XBF_WRITE_FAIL) { | |
| write_fail = true; | |
| xfs_buf_alert_ratelimited(bp, | |
| "XFS: Corruption Alert", | |
| "Corruption Alert: Buffer at daddr 0x%llx had permanent write failures!", | |
| (long long)xfs_buf_daddr(bp)); | |
| } | |
| xfs_buf_destroy(bp); | |
| } | |
| if (loop++ != 0) | |
| delay(100); | |
| } | |
| /* | |
| * If one or more failed buffers were freed, that means dirty metadata | |
| * was thrown away. This should only ever happen after I/O completion | |
| * handling has elevated I/O error(s) to permanent failures and shuts | |
| * down the journal. | |
| */ | |
| if (write_fail) { | |
| ASSERT(xlog_is_shutdown(btp->bt_mount->m_log)); | |
| xfs_alert(btp->bt_mount, | |
| "Please run xfs_repair to determine the extent of the problem."); | |
| } | |
| } | |
| static enum lru_status | |
| xfs_buftarg_isolate( | |
| struct list_head *item, | |
| struct list_lru_one *lru, | |
| void *arg) | |
| { | |
| struct xfs_buf *bp = container_of(item, struct xfs_buf, b_lru); | |
| struct list_head *dispose = arg; | |
| /* | |
| * We are inverting the lru lock vs bp->b_lockref.lock order here, so | |
| * use a trylock. If we fail to get the lock, just skip the buffer. | |
| */ | |
| if (!spin_trylock(&bp->b_lockref.lock)) | |
| return LRU_SKIP; | |
| /* | |
| * If the buffer is in use, remove it from the LRU for now. We can't | |
| * free it while someone is using it, and we should also not count | |
| * eviction passed for it, just as if it hadn't been added to the LRU | |
| * yet. | |
| */ | |
| if (bp->b_lockref.count > 0) { | |
| list_lru_isolate(lru, &bp->b_lru); | |
| spin_unlock(&bp->b_lockref.lock); | |
| return LRU_REMOVED; | |
| } | |
| /* | |
| * Decrement the b_lru_ref count unless the value is already | |
| * zero. If the value is already zero, we need to reclaim the | |
| * buffer, otherwise it gets another trip through the LRU. | |
| */ | |
| if (atomic_add_unless(&bp->b_lru_ref, -1, 0)) { | |
| spin_unlock(&bp->b_lockref.lock); | |
| return LRU_ROTATE; | |
| } | |
| xfs_buf_kill(bp); | |
| list_lru_isolate_move(lru, item, dispose); | |
| spin_unlock(&bp->b_lockref.lock); | |
| return LRU_REMOVED; | |
| } | |
| static unsigned long | |
| xfs_buftarg_shrink_scan( | |
| struct shrinker *shrink, | |
| struct shrink_control *sc) | |
| { | |
| struct xfs_buftarg *btp = shrink->private_data; | |
| LIST_HEAD(dispose); | |
| unsigned long freed; | |
| freed = list_lru_shrink_walk(&btp->bt_lru, sc, | |
| xfs_buftarg_isolate, &dispose); | |
| while (!list_empty(&dispose)) { | |
| struct xfs_buf *bp; | |
| bp = list_first_entry(&dispose, struct xfs_buf, b_lru); | |
| list_del_init(&bp->b_lru); | |
| xfs_buf_destroy(bp); | |
| } | |
| return freed; | |
| } | |
| static unsigned long | |
| xfs_buftarg_shrink_count( | |
| struct shrinker *shrink, | |
| struct shrink_control *sc) | |
| { | |
| struct xfs_buftarg *btp = shrink->private_data; | |
| return list_lru_shrink_count(&btp->bt_lru, sc); | |
| } | |
| void | |
| xfs_destroy_buftarg( | |
| struct xfs_buftarg *btp) | |
| { | |
| shrinker_free(btp->bt_shrinker); | |
| ASSERT(percpu_counter_sum(&btp->bt_readahead_count) == 0); | |
| percpu_counter_destroy(&btp->bt_readahead_count); | |
| list_lru_destroy(&btp->bt_lru); | |
| rhashtable_destroy(&btp->bt_hash); | |
| } | |
| void | |
| xfs_free_buftarg( | |
| struct xfs_buftarg *btp) | |
| { | |
| xfs_destroy_buftarg(btp); | |
| fs_put_dax(btp->bt_daxdev, btp->bt_mount); | |
| /* the main block device is closed by kill_block_super */ | |
| if (btp->bt_bdev != btp->bt_mount->m_super->s_bdev) | |
| fs_bdev_file_release(btp->bt_file, btp->bt_mount->m_super); | |
| kfree(btp); | |
| } | |
| /* | |
| * Configure this buffer target for hardware-assisted atomic writes if the | |
| * underlying block device supports is congruent with the filesystem geometry. | |
| */ | |
| static inline void | |
| xfs_configure_buftarg_atomic_writes( | |
| struct xfs_buftarg *btp) | |
| { | |
| struct xfs_mount *mp = btp->bt_mount; | |
| unsigned int min_bytes, max_bytes; | |
| min_bytes = bdev_atomic_write_unit_min_bytes(btp->bt_bdev); | |
| max_bytes = bdev_atomic_write_unit_max_bytes(btp->bt_bdev); | |
| /* | |
| * Ignore atomic write geometry that is nonsense or doesn't even cover | |
| * a single fsblock. | |
| */ | |
| if (min_bytes > max_bytes || | |
| min_bytes > mp->m_sb.sb_blocksize || | |
| max_bytes < mp->m_sb.sb_blocksize) { | |
| min_bytes = 0; | |
| max_bytes = 0; | |
| } | |
| btp->bt_awu_min = min_bytes; | |
| btp->bt_awu_max = max_bytes; | |
| } | |
| /* Configure a buffer target that abstracts a block device. */ | |
| int | |
| xfs_configure_buftarg( | |
| struct xfs_buftarg *btp, | |
| unsigned int sectorsize, | |
| xfs_rfsblock_t nr_blocks) | |
| { | |
| struct xfs_mount *mp = btp->bt_mount; | |
| if (btp->bt_bdev) { | |
| int error; | |
| error = bdev_validate_blocksize(btp->bt_bdev, sectorsize); | |
| if (error) { | |
| xfs_warn(mp, | |
| "Cannot use blocksize %u on device %pg, err %d", | |
| sectorsize, btp->bt_bdev, error); | |
| return -EINVAL; | |
| } | |
| if (bdev_can_atomic_write(btp->bt_bdev)) | |
| xfs_configure_buftarg_atomic_writes(btp); | |
| } | |
| btp->bt_meta_sectorsize = sectorsize; | |
| btp->bt_meta_sectormask = sectorsize - 1; | |
| /* m_blkbb_log is not set up yet */ | |
| btp->bt_nr_sectors = nr_blocks << (mp->m_sb.sb_blocklog - BBSHIFT); | |
| return 0; | |
| } | |
| int | |
| xfs_init_buftarg( | |
| struct xfs_buftarg *btp, | |
| size_t logical_sectorsize, | |
| const char *descr) | |
| { | |
| /* The maximum size of the buftarg is only known once the sb is read. */ | |
| btp->bt_nr_sectors = XFS_BUF_DADDR_MAX; | |
| /* Set up device logical sector size mask */ | |
| btp->bt_logical_sectorsize = logical_sectorsize; | |
| btp->bt_logical_sectormask = logical_sectorsize - 1; | |
| /* | |
| * Buffer IO error rate limiting. Limit it to no more than 10 messages | |
| * per 30 seconds so as to not spam logs too much on repeated errors. | |
| */ | |
| ratelimit_state_init(&btp->bt_ioerror_rl, 30 * HZ, | |
| DEFAULT_RATELIMIT_BURST); | |
| if (rhashtable_init(&btp->bt_hash, &xfs_buf_hash_params)) | |
| return -ENOMEM; | |
| if (list_lru_init(&btp->bt_lru)) | |
| goto out_destroy_hash; | |
| if (percpu_counter_init(&btp->bt_readahead_count, 0, GFP_KERNEL)) | |
| goto out_destroy_lru; | |
| btp->bt_shrinker = | |
| shrinker_alloc(SHRINKER_NUMA_AWARE, "xfs-buf:%s", descr); | |
| if (!btp->bt_shrinker) | |
| goto out_destroy_io_count; | |
| btp->bt_shrinker->count_objects = xfs_buftarg_shrink_count; | |
| btp->bt_shrinker->scan_objects = xfs_buftarg_shrink_scan; | |
| btp->bt_shrinker->private_data = btp; | |
| shrinker_register(btp->bt_shrinker); | |
| return 0; | |
| out_destroy_io_count: | |
| percpu_counter_destroy(&btp->bt_readahead_count); | |
| out_destroy_lru: | |
| list_lru_destroy(&btp->bt_lru); | |
| out_destroy_hash: | |
| rhashtable_destroy(&btp->bt_hash); | |
| return -ENOMEM; | |
| } | |
| struct xfs_buftarg * | |
| xfs_alloc_buftarg( | |
| struct xfs_mount *mp, | |
| struct file *bdev_file) | |
| { | |
| struct xfs_buftarg *btp; | |
| const struct dax_holder_operations *ops = NULL; | |
| int error; | |
| #if defined(CONFIG_FS_DAX) && defined(CONFIG_MEMORY_FAILURE) | |
| ops = &xfs_dax_holder_operations; | |
| #endif | |
| btp = kzalloc_obj(*btp, GFP_KERNEL | __GFP_NOFAIL); | |
| btp->bt_mount = mp; | |
| btp->bt_file = bdev_file; | |
| btp->bt_bdev = file_bdev(bdev_file); | |
| btp->bt_dev = btp->bt_bdev->bd_dev; | |
| btp->bt_daxdev = fs_dax_get_by_bdev(btp->bt_bdev, &btp->bt_dax_part_off, | |
| mp, ops); | |
| /* | |
| * Flush and invalidate all devices' pagecaches before reading any | |
| * metadata because XFS doesn't use the bdev pagecache. | |
| */ | |
| error = sync_blockdev(btp->bt_bdev); | |
| if (error) | |
| goto error_free; | |
| /* | |
| * When allocating the buftargs we have not yet read the super block and | |
| * thus don't know the file system sector size yet. | |
| */ | |
| btp->bt_meta_sectorsize = bdev_logical_block_size(btp->bt_bdev); | |
| btp->bt_meta_sectormask = btp->bt_meta_sectorsize - 1; | |
| error = xfs_init_buftarg(btp, btp->bt_meta_sectorsize, | |
| mp->m_super->s_id); | |
| if (error) | |
| goto error_free; | |
| return btp; | |
| error_free: | |
| fs_put_dax(btp->bt_daxdev, mp); | |
| kfree(btp); | |
| return ERR_PTR(error); | |
| } | |
| static inline void | |
| xfs_buf_list_del( | |
| struct xfs_buf *bp) | |
| { | |
| list_del_init(&bp->b_list); | |
| wake_up_var(&bp->b_list); | |
| } | |
| /* | |
| * Cancel a delayed write list. | |
| * | |
| * Remove each buffer from the list, clear the delwri queue flag and drop the | |
| * associated buffer reference. | |
| */ | |
| void | |
| xfs_buf_delwri_cancel( | |
| struct list_head *list) | |
| { | |
| struct xfs_buf *bp; | |
| while (!list_empty(list)) { | |
| bp = list_first_entry(list, struct xfs_buf, b_list); | |
| xfs_buf_lock(bp); | |
| xfs_buf_clear_flags(bp, _XBF_DELWRI_Q); | |
| xfs_buf_list_del(bp); | |
| xfs_buf_relse(bp); | |
| } | |
| } | |
| /* | |
| * Add a buffer to the delayed write list. | |
| * | |
| * This queues a buffer for writeout if it hasn't already been. Note that | |
| * neither this routine nor the buffer list submission functions perform | |
| * any internal synchronization. It is expected that the lists are thread-local | |
| * to the callers. | |
| * | |
| * Returns true if we queued up the buffer, or false if it already had | |
| * been on the buffer list. | |
| */ | |
| bool | |
| xfs_buf_delwri_queue( | |
| struct xfs_buf *bp, | |
| struct list_head *list) | |
| { | |
| ASSERT(xfs_buf_islocked(bp)); | |
| ASSERT(!(bp->b_flags & XBF_READ)); | |
| /* | |
| * If the buffer is already marked delwri it already is queued up | |
| * by someone else for imediate writeout. Just ignore it in that | |
| * case. | |
| */ | |
| if (bp->b_flags & _XBF_DELWRI_Q) { | |
| trace_xfs_buf_delwri_queued(bp, _RET_IP_); | |
| return false; | |
| } | |
| trace_xfs_buf_delwri_queue(bp, _RET_IP_); | |
| /* | |
| * If a buffer gets written out synchronously or marked stale while it | |
| * is on a delwri list we lazily remove it. To do this, the other party | |
| * clears the _XBF_DELWRI_Q flag but otherwise leaves the buffer alone. | |
| * It remains referenced and on the list. In a rare corner case it | |
| * might get readded to a delwri list after the synchronous writeout, in | |
| * which case we need just need to re-add the flag here. | |
| */ | |
| xfs_buf_set_flags(bp, _XBF_DELWRI_Q); | |
| if (list_empty(&bp->b_list)) { | |
| xfs_buf_hold(bp); | |
| list_add_tail(&bp->b_list, list); | |
| } | |
| return true; | |
| } | |
| /* | |
| * Queue a buffer to this delwri list as part of a data integrity operation. | |
| * If the buffer is on any other delwri list, we'll wait for that to clear | |
| * so that the caller can submit the buffer for IO and wait for the result. | |
| * Callers must ensure the buffer is not already on the list. | |
| */ | |
| void | |
| xfs_buf_delwri_queue_here( | |
| struct xfs_buf *bp, | |
| struct list_head *buffer_list) | |
| { | |
| /* | |
| * We need this buffer to end up on the /caller's/ delwri list, not any | |
| * old list. This can happen if the buffer is marked stale (which | |
| * clears DELWRI_Q) after the AIL queues the buffer to its list but | |
| * before the AIL has a chance to submit the list. | |
| */ | |
| while (!list_empty(&bp->b_list)) { | |
| xfs_buf_unlock(bp); | |
| wait_var_event(&bp->b_list, list_empty(&bp->b_list)); | |
| xfs_buf_lock(bp); | |
| } | |
| ASSERT(!(bp->b_flags & _XBF_DELWRI_Q)); | |
| xfs_buf_delwri_queue(bp, buffer_list); | |
| } | |
| /* | |
| * Compare function is more complex than it needs to be because | |
| * the return value is only 32 bits and we are doing comparisons | |
| * on 64 bit values | |
| */ | |
| static int | |
| xfs_buf_cmp( | |
| void *priv, | |
| const struct list_head *a, | |
| const struct list_head *b) | |
| { | |
| struct xfs_buf *ap = container_of(a, struct xfs_buf, b_list); | |
| struct xfs_buf *bp = container_of(b, struct xfs_buf, b_list); | |
| xfs_daddr_t diff; | |
| diff = ap->b_maps[0].bm_bn - bp->b_maps[0].bm_bn; | |
| if (diff < 0) | |
| return -1; | |
| if (diff > 0) | |
| return 1; | |
| return 0; | |
| } | |
| static bool | |
| xfs_buf_delwri_submit_prep( | |
| struct xfs_buf *bp) | |
| { | |
| /* | |
| * Someone else might have written the buffer synchronously or marked it | |
| * stale in the meantime. In that case only the _XBF_DELWRI_Q flag got | |
| * cleared, and we have to drop the reference and remove it from the | |
| * list here. | |
| */ | |
| if (!(bp->b_flags & _XBF_DELWRI_Q)) { | |
| xfs_buf_list_del(bp); | |
| xfs_buf_relse(bp); | |
| return false; | |
| } | |
| trace_xfs_buf_delwri_split(bp, _RET_IP_); | |
| xfs_buf_clear_flags(bp, _XBF_DELWRI_Q); | |
| xfs_buf_set_flags(bp, XBF_WRITE); | |
| return true; | |
| } | |
| /* | |
| * Write out a buffer list asynchronously. | |
| * | |
| * This will take the @buffer_list, write all non-locked and non-pinned buffers | |
| * out and not wait for I/O completion on any of the buffers. This interface | |
| * is only safely useable for callers that can track I/O completion by higher | |
| * level means, e.g. AIL pushing as the @buffer_list is consumed in this | |
| * function. | |
| * | |
| * Note: this function will skip buffers it would block on, and in doing so | |
| * leaves them on @buffer_list so they can be retried on a later pass. As such, | |
| * it is up to the caller to ensure that the buffer list is fully submitted or | |
| * cancelled appropriately when they are finished with the list. Failure to | |
| * cancel or resubmit the list until it is empty will result in leaked buffers | |
| * at unmount time. | |
| */ | |
| int | |
| xfs_buf_delwri_submit_nowait( | |
| struct list_head *buffer_list) | |
| { | |
| struct xfs_buf *bp, *n; | |
| int pinned = 0; | |
| struct blk_plug plug; | |
| list_sort(NULL, buffer_list, xfs_buf_cmp); | |
| blk_start_plug(&plug); | |
| list_for_each_entry_safe(bp, n, buffer_list, b_list) { | |
| if (!xfs_buf_trylock(bp)) | |
| continue; | |
| if (xfs_buf_ispinned(bp)) { | |
| xfs_buf_unlock(bp); | |
| pinned++; | |
| continue; | |
| } | |
| if (!xfs_buf_delwri_submit_prep(bp)) | |
| continue; | |
| xfs_buf_set_flags(bp, XBF_ASYNC); | |
| xfs_buf_list_del(bp); | |
| xfs_buf_submit(bp); | |
| } | |
| blk_finish_plug(&plug); | |
| return pinned; | |
| } | |
| /* | |
| * Write out a buffer list synchronously. | |
| * | |
| * This will take the @buffer_list, write all buffers out and wait for I/O | |
| * completion on all of the buffers. @buffer_list is consumed by the function, | |
| * so callers must have some other way of tracking buffers if they require such | |
| * functionality. | |
| */ | |
| int | |
| xfs_buf_delwri_submit( | |
| struct list_head *buffer_list) | |
| { | |
| LIST_HEAD (wait_list); | |
| int error = 0, error2; | |
| struct xfs_buf *bp, *n; | |
| struct blk_plug plug; | |
| list_sort(NULL, buffer_list, xfs_buf_cmp); | |
| blk_start_plug(&plug); | |
| list_for_each_entry_safe(bp, n, buffer_list, b_list) { | |
| xfs_buf_lock(bp); | |
| if (!xfs_buf_delwri_submit_prep(bp)) | |
| continue; | |
| xfs_buf_clear_flags(bp, XBF_ASYNC); | |
| list_move_tail(&bp->b_list, &wait_list); | |
| xfs_buf_submit(bp); | |
| } | |
| blk_finish_plug(&plug); | |
| /* Wait for IO to complete. */ | |
| while (!list_empty(&wait_list)) { | |
| bp = list_first_entry(&wait_list, struct xfs_buf, b_list); | |
| xfs_buf_list_del(bp); | |
| /* | |
| * Wait on the locked buffer, check for errors and unlock and | |
| * release the delwri queue reference. | |
| */ | |
| error2 = xfs_buf_iowait(bp); | |
| xfs_buf_relse(bp); | |
| if (!error) | |
| error = error2; | |
| } | |
| return error; | |
| } | |
| void xfs_buf_set_ref(struct xfs_buf *bp, int lru_ref) | |
| { | |
| /* | |
| * Set the lru reference count to 0 based on the error injection tag. | |
| * This allows userspace to disrupt buffer caching for debug/testing | |
| * purposes. | |
| */ | |
| if (XFS_TEST_ERROR(bp->b_mount, XFS_ERRTAG_BUF_LRU_REF)) | |
| lru_ref = 0; | |
| atomic_set(&bp->b_lru_ref, lru_ref); | |
| } | |
| /* | |
| * Verify an on-disk magic value against the magic value specified in the | |
| * verifier structure. The verifier magic is in disk byte order so the caller is | |
| * expected to pass the value directly from disk. | |
| */ | |
| bool | |
| xfs_verify_magic( | |
| struct xfs_buf *bp, | |
| __be32 dmagic) | |
| { | |
| struct xfs_mount *mp = bp->b_mount; | |
| int idx; | |
| idx = xfs_has_crc(mp); | |
| if (WARN_ON(!bp->b_ops || !bp->b_ops->magic[idx])) | |
| return false; | |
| return dmagic == bp->b_ops->magic[idx]; | |
| } | |
| /* | |
| * Verify an on-disk magic value against the magic value specified in the | |
| * verifier structure. The verifier magic is in disk byte order so the caller is | |
| * expected to pass the value directly from disk. | |
| */ | |
| bool | |
| xfs_verify_magic16( | |
| struct xfs_buf *bp, | |
| __be16 dmagic) | |
| { | |
| struct xfs_mount *mp = bp->b_mount; | |
| int idx; | |
| idx = xfs_has_crc(mp); | |
| if (WARN_ON(!bp->b_ops || !bp->b_ops->magic16[idx])) | |
| return false; | |
| return dmagic == bp->b_ops->magic16[idx]; | |
| } |