| // SPDX-License-Identifier: LGPL-2.1 | |
| /* | |
| * | |
| * Copyright (C) International Business Machines Corp., 2002,2011 | |
| * Etersoft, 2012 | |
| * Author(s): Steve French (sfrench@us.ibm.com) | |
| * Pavel Shilovsky (pshilovsky@samba.org) 2012 | |
| * | |
| */ | |
| #include <crypto/sha2.h> | |
| #include <linux/ctype.h> | |
| #include "cifsglob.h" | |
| #include "cifsproto.h" | |
| #include "smb2proto.h" | |
| #include "cifs_debug.h" | |
| #include "cifs_unicode.h" | |
| #include "../common/smb2status.h" | |
| #include "smb2glob.h" | |
| #include "nterr.h" | |
| #include "cached_dir.h" | |
| static unsigned int __smb2_calc_size(void *buf, bool *have_data, | |
| bool *data_area_overlap); | |
| static int | |
| check_smb2_hdr(struct smb2_hdr *shdr, __u64 mid) | |
| { | |
| __u64 wire_mid = le64_to_cpu(shdr->MessageId); | |
| /* | |
| * Make sure that this really is an SMB, that it is a response, | |
| * and that the message ids match. | |
| */ | |
| if ((shdr->ProtocolId == SMB2_PROTO_NUMBER) && | |
| (mid == wire_mid)) { | |
| if (shdr->Flags & SMB2_FLAGS_SERVER_TO_REDIR) | |
| return 0; | |
| else { | |
| /* only one valid case where server sends us request */ | |
| if (shdr->Command == SMB2_OPLOCK_BREAK) | |
| return 0; | |
| else | |
| cifs_dbg(VFS, "Received Request not response\n"); | |
| } | |
| } else { /* bad signature or mid */ | |
| if (shdr->ProtocolId != SMB2_PROTO_NUMBER) | |
| cifs_dbg(VFS, "Bad protocol string signature header %x\n", | |
| le32_to_cpu(shdr->ProtocolId)); | |
| if (mid != wire_mid) | |
| cifs_dbg(VFS, "Mids do not match: %llu and %llu\n", | |
| mid, wire_mid); | |
| } | |
| cifs_dbg(VFS, "Bad SMB detected. The Mid=%llu\n", wire_mid); | |
| return 1; | |
| } | |
| /* | |
| * The following table defines the expected "StructureSize" of SMB2 responses | |
| * in order by SMB2 command. This is similar to "wct" in SMB/CIFS responses. | |
| * | |
| * Note that commands are defined in smb2pdu.h in le16 but the array below is | |
| * indexed by command in host byte order | |
| */ | |
| static const __le16 smb2_rsp_struct_sizes[NUMBER_OF_SMB2_COMMANDS] = { | |
| /* SMB2_NEGOTIATE */ cpu_to_le16(65), | |
| /* SMB2_SESSION_SETUP */ cpu_to_le16(9), | |
| /* SMB2_LOGOFF */ cpu_to_le16(4), | |
| /* SMB2_TREE_CONNECT */ cpu_to_le16(16), | |
| /* SMB2_TREE_DISCONNECT */ cpu_to_le16(4), | |
| /* SMB2_CREATE */ cpu_to_le16(89), | |
| /* SMB2_CLOSE */ cpu_to_le16(60), | |
| /* SMB2_FLUSH */ cpu_to_le16(4), | |
| /* SMB2_READ */ cpu_to_le16(17), | |
| /* SMB2_WRITE */ cpu_to_le16(17), | |
| /* SMB2_LOCK */ cpu_to_le16(4), | |
| /* SMB2_IOCTL */ cpu_to_le16(49), | |
| /* BB CHECK this ... not listed in documentation */ | |
| /* SMB2_CANCEL */ cpu_to_le16(0), | |
| /* SMB2_ECHO */ cpu_to_le16(4), | |
| /* SMB2_QUERY_DIRECTORY */ cpu_to_le16(9), | |
| /* SMB2_CHANGE_NOTIFY */ cpu_to_le16(9), | |
| /* SMB2_QUERY_INFO */ cpu_to_le16(9), | |
| /* SMB2_SET_INFO */ cpu_to_le16(2), | |
| /* BB FIXME can also be 44 for lease break */ | |
| /* SMB2_OPLOCK_BREAK */ cpu_to_le16(24) | |
| }; | |
| /* | |
| * Minimum received PDU size for commands whose response carries a | |
| * variable-length data area. A non-zero entry marks the command as | |
| * having one, and gives the length smb2_check_message() requires | |
| * before smb2_get_data_area_len() reads the offset and length fields | |
| * out of the fixed response struct. | |
| */ | |
| static const size_t smb2_min_pdu_len[NUMBER_OF_SMB2_COMMANDS] = { | |
| /* SMB2_NEGOTIATE */ sizeof(struct smb2_negotiate_rsp), | |
| /* SMB2_SESSION_SETUP */ sizeof(struct smb2_sess_setup_rsp), | |
| /* SMB2_LOGOFF */ 0, | |
| /* SMB2_TREE_CONNECT */ 0, | |
| /* SMB2_TREE_DISCONNECT */ 0, | |
| /* SMB2_CREATE */ sizeof(struct smb2_create_rsp), | |
| /* SMB2_CLOSE */ 0, | |
| /* SMB2_FLUSH */ 0, | |
| /* SMB2_READ */ sizeof(struct smb2_read_rsp), | |
| /* SMB2_WRITE */ 0, | |
| /* SMB2_LOCK */ 0, | |
| /* SMB2_IOCTL */ sizeof(struct smb2_ioctl_rsp), | |
| /* SMB2_CANCEL */ 0, | |
| /* SMB2_ECHO */ 0, | |
| /* SMB2_QUERY_DIRECTORY */ sizeof(struct smb2_query_directory_rsp), | |
| /* SMB2_CHANGE_NOTIFY */ sizeof(struct smb2_change_notify_rsp), | |
| /* SMB2_QUERY_INFO */ sizeof(struct smb2_query_info_rsp), | |
| /* SMB2_SET_INFO */ 0, | |
| /* SMB2_OPLOCK_BREAK */ 0, | |
| }; | |
| #define smb2_has_data_area(cmd) (smb2_min_pdu_len[cmd] != 0) | |
| #define SMB311_NEGPROT_BASE_SIZE (sizeof(struct smb2_hdr) + sizeof(struct smb2_negotiate_rsp)) | |
| static __u32 get_neg_ctxt_len(struct smb2_hdr *hdr, __u32 len, | |
| __u32 non_ctxlen) | |
| { | |
| __u16 neg_count; | |
| __u32 nc_offset, size_of_pad_before_neg_ctxts; | |
| struct smb2_negotiate_rsp *pneg_rsp = (struct smb2_negotiate_rsp *)hdr; | |
| /* Negotiate contexts are only valid for latest dialect SMB3.11 */ | |
| neg_count = le16_to_cpu(pneg_rsp->NegotiateContextCount); | |
| if ((neg_count == 0) || | |
| (pneg_rsp->DialectRevision != cpu_to_le16(SMB311_PROT_ID))) | |
| return 0; | |
| /* | |
| * if SPNEGO blob present (ie the RFC2478 GSS info which indicates | |
| * which security mechanisms the server supports) make sure that | |
| * the negotiate contexts start after it | |
| */ | |
| nc_offset = le32_to_cpu(pneg_rsp->NegotiateContextOffset); | |
| /* | |
| * non_ctxlen is at least shdr->StructureSize + pdu->StructureSize2 | |
| * and the latter is 1 byte bigger than the fix-sized area of the | |
| * NEGOTIATE response | |
| */ | |
| if (nc_offset + 1 < non_ctxlen) { | |
| pr_warn_once("Invalid negotiate context offset %d\n", nc_offset); | |
| return 0; | |
| } else if (nc_offset + 1 == non_ctxlen) { | |
| cifs_dbg(FYI, "no SPNEGO security blob in negprot rsp\n"); | |
| size_of_pad_before_neg_ctxts = 0; | |
| } else if (non_ctxlen == SMB311_NEGPROT_BASE_SIZE + 1) | |
| /* has padding, but no SPNEGO blob */ | |
| size_of_pad_before_neg_ctxts = nc_offset - non_ctxlen + 1; | |
| else | |
| size_of_pad_before_neg_ctxts = nc_offset - non_ctxlen; | |
| /* Verify that at least minimal negotiate contexts fit within frame */ | |
| if (len < nc_offset + (neg_count * sizeof(struct smb2_neg_context))) { | |
| pr_warn_once("negotiate context goes beyond end\n"); | |
| return 0; | |
| } | |
| cifs_dbg(FYI, "length of negcontexts %d pad %d\n", | |
| len - nc_offset, size_of_pad_before_neg_ctxts); | |
| /* length of negcontexts including pad from end of sec blob to them */ | |
| return (len - nc_offset) + size_of_pad_before_neg_ctxts; | |
| } | |
| int | |
| smb2_check_message(char *buf, unsigned int pdu_len, unsigned int len, | |
| struct TCP_Server_Info *server) | |
| { | |
| struct TCP_Server_Info *pserver; | |
| struct smb2_hdr *shdr = (struct smb2_hdr *)buf; | |
| struct smb2_pdu *pdu = (struct smb2_pdu *)shdr; | |
| int hdr_size = sizeof(struct smb2_hdr); | |
| int pdu_size = sizeof(struct smb2_pdu); | |
| int command; | |
| __u32 calc_len; /* calculated length */ | |
| __u64 mid; | |
| bool have_data; | |
| bool data_area_overlap; | |
| /* If server is a channel, select the primary channel */ | |
| pserver = SERVER_IS_CHAN(server) ? server->primary_server : server; | |
| /* | |
| * Add function to do table lookup of StructureSize by command | |
| * ie Validate the wct via smb2_struct_sizes table above | |
| */ | |
| if (shdr->ProtocolId == SMB2_TRANSFORM_PROTO_NUM) { | |
| struct smb2_transform_hdr *thdr = | |
| (struct smb2_transform_hdr *)buf; | |
| struct cifs_ses *ses = NULL; | |
| struct cifs_ses *iter; | |
| /* decrypt frame now that it is completely read in */ | |
| spin_lock(&cifs_tcp_ses_lock); | |
| list_for_each_entry(iter, &pserver->smb_ses_list, smb_ses_list) { | |
| if (iter->Suid == le64_to_cpu(thdr->SessionId)) { | |
| ses = iter; | |
| break; | |
| } | |
| } | |
| spin_unlock(&cifs_tcp_ses_lock); | |
| if (!ses) { | |
| cifs_dbg(VFS, "no decryption - session id not found\n"); | |
| return 1; | |
| } | |
| } | |
| mid = le64_to_cpu(shdr->MessageId); | |
| if (check_smb2_hdr(shdr, mid)) | |
| return 1; | |
| if (shdr->StructureSize != SMB2_HEADER_STRUCTURE_SIZE) { | |
| cifs_dbg(VFS, "Invalid structure size %u\n", | |
| le16_to_cpu(shdr->StructureSize)); | |
| return 1; | |
| } | |
| command = le16_to_cpu(shdr->Command); | |
| if (command >= NUMBER_OF_SMB2_COMMANDS) { | |
| cifs_dbg(VFS, "Invalid SMB2 command %d\n", command); | |
| return 1; | |
| } | |
| if (len < pdu_size) { | |
| if ((len >= hdr_size) | |
| && (shdr->Status != 0)) { | |
| pdu->StructureSize2 = 0; | |
| /* | |
| * As with SMB/CIFS, on some error cases servers may | |
| * not return wct properly | |
| */ | |
| return 0; | |
| } else { | |
| cifs_dbg(VFS, "Length less than SMB header size\n"); | |
| } | |
| return 1; | |
| } | |
| if (len > CIFSMaxBufSize + MAX_SMB2_HDR_SIZE) { | |
| cifs_dbg(VFS, "SMB length greater than maximum, mid=%llu\n", | |
| mid); | |
| return 1; | |
| } | |
| if (smb2_rsp_struct_sizes[command] != pdu->StructureSize2) { | |
| if (command != SMB2_OPLOCK_BREAK_HE && (shdr->Status == 0 || | |
| pdu->StructureSize2 != SMB2_ERROR_STRUCTURE_SIZE2_LE)) { | |
| /* error packets have 9 byte structure size */ | |
| cifs_dbg(VFS, "Invalid response size %u for command %d\n", | |
| le16_to_cpu(pdu->StructureSize2), command); | |
| return 1; | |
| } else if (command == SMB2_OPLOCK_BREAK_HE | |
| && (shdr->Status == 0) | |
| && (le16_to_cpu(pdu->StructureSize2) != 44) | |
| && (le16_to_cpu(pdu->StructureSize2) != 36)) { | |
| /* special case for SMB2.1 lease break message */ | |
| cifs_dbg(VFS, "Invalid response size %d for oplock break\n", | |
| le16_to_cpu(pdu->StructureSize2)); | |
| return 1; | |
| } | |
| } | |
| if ((shdr->Status == STATUS_SUCCESS || | |
| shdr->Status == STATUS_MORE_PROCESSING_REQUIRED || | |
| pdu->StructureSize2 != SMB2_ERROR_STRUCTURE_SIZE2_LE) && | |
| smb2_has_data_area(command) && | |
| len < smb2_min_pdu_len[command]) { | |
| cifs_server_dbg(VFS, "SMB2 command %d response too short: %u < %zu\n", | |
| command, len, smb2_min_pdu_len[command]); | |
| return 1; | |
| } | |
| have_data = false; | |
| data_area_overlap = false; | |
| calc_len = __smb2_calc_size(buf, &have_data, &data_area_overlap); | |
| /* Reject responses whose data area overlaps the fixed area. */ | |
| if (data_area_overlap) | |
| return 1; | |
| /* For SMB2_IOCTL, OutputOffset and OutputLength are optional, so might | |
| * be 0, and not a real miscalculation */ | |
| if (command == SMB2_IOCTL_HE && calc_len == 0) | |
| return 0; | |
| if (command == SMB2_NEGOTIATE_HE) | |
| calc_len += get_neg_ctxt_len(shdr, len, calc_len); | |
| if (len != calc_len) { | |
| /* create failed on symlink */ | |
| if (command == SMB2_CREATE_HE && | |
| shdr->Status == STATUS_STOPPED_ON_SYMLINK && | |
| len > calc_len) | |
| return 0; | |
| /* Windows 7 server returns 24 bytes more */ | |
| if (calc_len + 24 == len && command == SMB2_OPLOCK_BREAK_HE) | |
| return 0; | |
| /* | |
| * Server can return one byte more due to implied bcc[0]. | |
| * Allow it only when there is no data area; if data_length > 0 | |
| * the +1 gap indicates an overreported data length rather than | |
| * the bcc[0] omission. | |
| */ | |
| if (calc_len == len + 1 && !have_data) | |
| return 0; | |
| /* | |
| * Some windows servers (win2016) will pad also the final | |
| * PDU in a compound to 8 bytes. | |
| */ | |
| if (ALIGN(calc_len, 8) == len) | |
| return 0; | |
| /* | |
| * MacOS server pads after SMB2.1 write response with 3 bytes | |
| * of junk. Other servers match RFC1001 len to actual | |
| * SMB2/SMB3 frame length (header + smb2 response specific data) | |
| * Some windows servers also pad up to 8 bytes when compounding. | |
| */ | |
| if (calc_len < len) | |
| return 0; | |
| /* Only log a message if len was really miscalculated */ | |
| if (unlikely(cifsFYI)) | |
| cifs_dbg(FYI, "Server response too short: calculated " | |
| "length %u doesn't match read length %u (cmd=%d, mid=%llu)\n", | |
| calc_len, len, command, mid); | |
| else | |
| pr_warn("Server response too short: calculated length " | |
| "%u doesn't match read length %u (cmd=%d, mid=%llu)\n", | |
| calc_len, len, command, mid); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Returns the pointer to the beginning of the data area. Length of the data | |
| * area and the offset to it (from the beginning of the smb are also returned. | |
| */ | |
| char * | |
| smb2_get_data_area_len(int *off, int *len, struct smb2_hdr *shdr) | |
| { | |
| const int max_off = 4096; | |
| const int max_len = 128 * 1024; | |
| *off = 0; | |
| *len = 0; | |
| /* error responses do not have data area */ | |
| if (shdr->Status && shdr->Status != STATUS_MORE_PROCESSING_REQUIRED && | |
| (((struct smb2_err_rsp *)shdr)->StructureSize) == | |
| SMB2_ERROR_STRUCTURE_SIZE2_LE) | |
| return NULL; | |
| /* | |
| * Following commands have data areas so we have to get the location | |
| * of the data buffer offset and data buffer length for the particular | |
| * command. | |
| */ | |
| switch (shdr->Command) { | |
| case SMB2_NEGOTIATE: | |
| *off = le16_to_cpu( | |
| ((struct smb2_negotiate_rsp *)shdr)->SecurityBufferOffset); | |
| *len = le16_to_cpu( | |
| ((struct smb2_negotiate_rsp *)shdr)->SecurityBufferLength); | |
| break; | |
| case SMB2_SESSION_SETUP: | |
| *off = le16_to_cpu( | |
| ((struct smb2_sess_setup_rsp *)shdr)->SecurityBufferOffset); | |
| *len = le16_to_cpu( | |
| ((struct smb2_sess_setup_rsp *)shdr)->SecurityBufferLength); | |
| break; | |
| case SMB2_CREATE: | |
| *off = le32_to_cpu( | |
| ((struct smb2_create_rsp *)shdr)->CreateContextsOffset); | |
| *len = le32_to_cpu( | |
| ((struct smb2_create_rsp *)shdr)->CreateContextsLength); | |
| break; | |
| case SMB2_QUERY_INFO: | |
| *off = le16_to_cpu( | |
| ((struct smb2_query_info_rsp *)shdr)->OutputBufferOffset); | |
| *len = le32_to_cpu( | |
| ((struct smb2_query_info_rsp *)shdr)->OutputBufferLength); | |
| break; | |
| case SMB2_READ: | |
| /* TODO: is this a bug ? */ | |
| *off = ((struct smb2_read_rsp *)shdr)->DataOffset; | |
| *len = le32_to_cpu(((struct smb2_read_rsp *)shdr)->DataLength); | |
| break; | |
| case SMB2_QUERY_DIRECTORY: | |
| *off = le16_to_cpu( | |
| ((struct smb2_query_directory_rsp *)shdr)->OutputBufferOffset); | |
| *len = le32_to_cpu( | |
| ((struct smb2_query_directory_rsp *)shdr)->OutputBufferLength); | |
| break; | |
| case SMB2_IOCTL: | |
| *off = le32_to_cpu( | |
| ((struct smb2_ioctl_rsp *)shdr)->OutputOffset); | |
| *len = le32_to_cpu( | |
| ((struct smb2_ioctl_rsp *)shdr)->OutputCount); | |
| break; | |
| case SMB2_CHANGE_NOTIFY: | |
| *off = le16_to_cpu( | |
| ((struct smb2_change_notify_rsp *)shdr)->OutputBufferOffset); | |
| *len = le32_to_cpu( | |
| ((struct smb2_change_notify_rsp *)shdr)->OutputBufferLength); | |
| break; | |
| default: | |
| cifs_dbg(VFS, "no length check for command %d\n", le16_to_cpu(shdr->Command)); | |
| break; | |
| } | |
| /* | |
| * Invalid length or offset probably means data area is invalid, but | |
| * we have little choice but to ignore the data area in this case. | |
| */ | |
| if (unlikely(*off < 0 || *off > max_off || | |
| *len < 0 || *len > max_len)) { | |
| cifs_dbg(VFS, "%s: invalid data area (off=%d len=%d)\n", | |
| __func__, *off, *len); | |
| *off = 0; | |
| *len = 0; | |
| } else if (*off == 0) { | |
| *len = 0; | |
| } | |
| /* return pointer to beginning of data area, ie offset from SMB start */ | |
| if (*off > 0 && *len > 0) | |
| return (char *)shdr + *off; | |
| return NULL; | |
| } | |
| /* | |
| * Calculate the size of the SMB message based on the fixed header, fixed | |
| * parameter area, and variable data area. | |
| * | |
| * If have_data is not NULL, it is set when a non-empty data area is found. | |
| * If data_area_overlap is not NULL, it is set when the data area overlaps | |
| * the fixed area. | |
| */ | |
| static unsigned int | |
| __smb2_calc_size(void *buf, bool *have_data, bool *data_area_overlap) | |
| { | |
| struct smb2_pdu *pdu = buf; | |
| struct smb2_hdr *shdr = &pdu->hdr; | |
| int offset; /* the offset from the beginning of SMB to data area */ | |
| int data_length = 0; /* the length of the variable length data area */ | |
| /* Structure Size has already been checked to make sure it is 64 */ | |
| int len = le16_to_cpu(shdr->StructureSize); | |
| if (have_data) | |
| *have_data = false; | |
| if (data_area_overlap) | |
| *data_area_overlap = false; | |
| /* | |
| * StructureSize2, ie length of fixed parameter area has already | |
| * been checked to make sure it is the correct length. | |
| */ | |
| len += le16_to_cpu(pdu->StructureSize2); | |
| if (!smb2_has_data_area(le16_to_cpu(shdr->Command))) | |
| goto calc_size_exit; | |
| smb2_get_data_area_len(&offset, &data_length, shdr); | |
| cifs_dbg(FYI, "SMB2 data length %d offset %d\n", data_length, offset); | |
| if (data_length > 0) { | |
| /* | |
| * Check to make sure that data area begins after fixed area, | |
| * Note that last byte of the fixed area is part of data area | |
| * for some commands, typically those with odd StructureSize, | |
| * so we must add one to the calculation. | |
| */ | |
| if (offset + 1 < len) { | |
| cifs_dbg(VFS, "data area offset %d overlaps SMB2 header %d\n", | |
| offset + 1, len); | |
| if (data_area_overlap) | |
| *data_area_overlap = true; | |
| data_length = 0; | |
| goto calc_size_exit; | |
| } else { | |
| len = offset + data_length; | |
| } | |
| } | |
| calc_size_exit: | |
| cifs_dbg(FYI, "SMB2 len %d\n", len); | |
| if (have_data) | |
| *have_data = (data_length > 0); | |
| return len; | |
| } | |
| unsigned int | |
| smb2_calc_size(void *buf) | |
| { | |
| return __smb2_calc_size(buf, NULL, NULL); | |
| } | |
| /* Note: caller must free return buffer */ | |
| __le16 * | |
| cifs_convert_path_to_utf16(const char *from, struct cifs_sb_info *cifs_sb) | |
| { | |
| const char *start_of_path; | |
| int len; | |
| /* Windows doesn't allow paths beginning with \ */ | |
| if (from[0] == '\\') | |
| start_of_path = from + 1; | |
| /* SMB311 POSIX extensions paths do not include leading slash */ | |
| else if (cifs_sb_master_tlink(cifs_sb) && | |
| cifs_sb_master_tcon(cifs_sb)->posix_extensions && | |
| (from[0] == '/')) { | |
| start_of_path = from + 1; | |
| } else | |
| start_of_path = from; | |
| return cifs_strndup_to_utf16(start_of_path, PATH_MAX, &len, | |
| cifs_sb->local_nls, cifs_remap(cifs_sb)); | |
| } | |
| __le32 smb2_get_lease_state(struct cifsInodeInfo *cinode, unsigned int oplock) | |
| { | |
| unsigned int sbflags = cifs_sb_flags(CIFS_SB(cinode)); | |
| __le32 lease = 0; | |
| if ((oplock & CIFS_CACHE_WRITE_FLG) || (sbflags & CIFS_MOUNT_RW_CACHE)) | |
| lease |= SMB2_LEASE_WRITE_CACHING_LE; | |
| if (oplock & CIFS_CACHE_HANDLE_FLG) | |
| lease |= SMB2_LEASE_HANDLE_CACHING_LE; | |
| if ((oplock & CIFS_CACHE_READ_FLG) || (sbflags & CIFS_MOUNT_RO_CACHE)) | |
| lease |= SMB2_LEASE_READ_CACHING_LE; | |
| return lease; | |
| } | |
| struct smb2_lease_break_work { | |
| struct work_struct lease_break; | |
| struct tcon_link *tlink; | |
| __u8 lease_key[16]; | |
| __le32 lease_state; | |
| }; | |
| static void | |
| cifs_ses_oplock_break(struct work_struct *work) | |
| { | |
| struct smb2_lease_break_work *lw = container_of(work, | |
| struct smb2_lease_break_work, lease_break); | |
| int rc = 0; | |
| rc = SMB2_lease_break(0, tlink_tcon(lw->tlink), lw->lease_key, | |
| lw->lease_state); | |
| cifs_dbg(FYI, "Lease release rc %d\n", rc); | |
| cifs_put_tlink(lw->tlink); | |
| kfree(lw); | |
| } | |
| static void | |
| smb2_queue_pending_open_break(struct tcon_link *tlink, __u8 *lease_key, | |
| __le32 new_lease_state) | |
| { | |
| struct smb2_lease_break_work *lw; | |
| lw = kmalloc_obj(struct smb2_lease_break_work); | |
| if (!lw) { | |
| cifs_put_tlink(tlink); | |
| return; | |
| } | |
| INIT_WORK(&lw->lease_break, cifs_ses_oplock_break); | |
| lw->tlink = tlink; | |
| lw->lease_state = new_lease_state; | |
| memcpy(lw->lease_key, lease_key, SMB2_LEASE_KEY_SIZE); | |
| queue_work(cifsiod_wq, &lw->lease_break); | |
| } | |
| static bool | |
| smb2_tcon_has_lease(struct cifs_tcon *tcon, struct smb2_lease_break *rsp) | |
| { | |
| __u8 lease_state; | |
| struct cifsFileInfo *cfile; | |
| struct cifsInodeInfo *cinode; | |
| int ack_req = le32_to_cpu(rsp->Flags & | |
| SMB2_NOTIFY_BREAK_LEASE_FLAG_ACK_REQUIRED); | |
| lease_state = le32_to_cpu(rsp->NewLeaseState); | |
| list_for_each_entry(cfile, &tcon->openFileList, tlist) { | |
| cinode = CIFS_I(d_inode(cfile->dentry)); | |
| if (memcmp(cinode->lease_key, rsp->LeaseKey, | |
| SMB2_LEASE_KEY_SIZE)) | |
| continue; | |
| cifs_dbg(FYI, "found in the open list\n"); | |
| cifs_dbg(FYI, "lease key match, lease break 0x%x\n", | |
| lease_state); | |
| if (ack_req) | |
| cfile->oplock_break_cancelled = false; | |
| else | |
| cfile->oplock_break_cancelled = true; | |
| set_bit(CIFS_INODE_PENDING_OPLOCK_BREAK, &cinode->flags); | |
| cfile->oplock_epoch = le16_to_cpu(rsp->Epoch); | |
| cfile->oplock_level = lease_state; | |
| cifs_queue_oplock_break(cfile); | |
| return true; | |
| } | |
| return false; | |
| } | |
| static struct cifs_pending_open * | |
| smb2_tcon_find_pending_open_lease(struct cifs_tcon *tcon, | |
| struct smb2_lease_break *rsp) | |
| { | |
| __u8 lease_state = le32_to_cpu(rsp->NewLeaseState); | |
| int ack_req = le32_to_cpu(rsp->Flags & | |
| SMB2_NOTIFY_BREAK_LEASE_FLAG_ACK_REQUIRED); | |
| struct cifs_pending_open *open; | |
| struct cifs_pending_open *found = NULL; | |
| list_for_each_entry(open, &tcon->pending_opens, olist) { | |
| if (memcmp(open->lease_key, rsp->LeaseKey, | |
| SMB2_LEASE_KEY_SIZE)) | |
| continue; | |
| if (!found && ack_req) { | |
| found = open; | |
| } | |
| cifs_dbg(FYI, "found in the pending open list\n"); | |
| cifs_dbg(FYI, "lease key match, lease break 0x%x\n", | |
| lease_state); | |
| open->oplock = lease_state; | |
| } | |
| return found; | |
| } | |
| static bool | |
| smb2_is_valid_lease_break(char *buffer, struct TCP_Server_Info *server) | |
| { | |
| struct smb2_lease_break *rsp = (struct smb2_lease_break *)buffer; | |
| struct TCP_Server_Info *pserver; | |
| struct cifs_ses *ses; | |
| struct cifs_tcon *tcon; | |
| struct cifs_pending_open *open; | |
| /* Trace receipt of lease break request from server */ | |
| trace_smb3_lease_break_enter(le32_to_cpu(rsp->CurrentLeaseState), | |
| le32_to_cpu(rsp->Flags), | |
| le16_to_cpu(rsp->Epoch), | |
| le32_to_cpu(rsp->hdr.Id.SyncId.TreeId), | |
| le64_to_cpu(rsp->hdr.SessionId), | |
| *((u64 *)rsp->LeaseKey), | |
| *((u64 *)&rsp->LeaseKey[8])); | |
| cifs_dbg(FYI, "Checking for lease break\n"); | |
| /* If server is a channel, select the primary channel */ | |
| pserver = SERVER_IS_CHAN(server) ? server->primary_server : server; | |
| /* look up tcon based on tid & uid */ | |
| spin_lock(&cifs_tcp_ses_lock); | |
| list_for_each_entry(ses, &pserver->smb_ses_list, smb_ses_list) { | |
| if (cifs_ses_exiting(ses)) | |
| continue; | |
| list_for_each_entry(tcon, &ses->tcon_list, tcon_list) { | |
| spin_lock(&tcon->open_file_lock); | |
| cifs_stats_inc( | |
| &tcon->stats.cifs_stats.num_oplock_brks); | |
| if (smb2_tcon_has_lease(tcon, rsp)) { | |
| spin_unlock(&tcon->open_file_lock); | |
| spin_unlock(&cifs_tcp_ses_lock); | |
| return true; | |
| } | |
| open = smb2_tcon_find_pending_open_lease(tcon, | |
| rsp); | |
| if (open) { | |
| __u8 lease_key[SMB2_LEASE_KEY_SIZE]; | |
| struct tcon_link *tlink; | |
| tlink = cifs_get_tlink(open->tlink); | |
| memcpy(lease_key, open->lease_key, | |
| SMB2_LEASE_KEY_SIZE); | |
| spin_unlock(&tcon->open_file_lock); | |
| spin_unlock(&cifs_tcp_ses_lock); | |
| smb2_queue_pending_open_break(tlink, | |
| lease_key, | |
| rsp->NewLeaseState); | |
| return true; | |
| } | |
| spin_unlock(&tcon->open_file_lock); | |
| if (cached_dir_lease_break(tcon, rsp->LeaseKey)) { | |
| spin_unlock(&cifs_tcp_ses_lock); | |
| return true; | |
| } | |
| } | |
| } | |
| spin_unlock(&cifs_tcp_ses_lock); | |
| cifs_dbg(FYI, "Can not process lease break - no lease matched\n"); | |
| trace_smb3_lease_not_found(le32_to_cpu(rsp->CurrentLeaseState), | |
| le32_to_cpu(rsp->Flags), | |
| le16_to_cpu(rsp->Epoch), | |
| le32_to_cpu(rsp->hdr.Id.SyncId.TreeId), | |
| le64_to_cpu(rsp->hdr.SessionId), | |
| *((u64 *)rsp->LeaseKey), | |
| *((u64 *)&rsp->LeaseKey[8])); | |
| return false; | |
| } | |
| bool | |
| smb2_is_valid_oplock_break(char *buffer, struct TCP_Server_Info *server) | |
| { | |
| struct smb2_oplock_break *rsp = (struct smb2_oplock_break *)buffer; | |
| struct TCP_Server_Info *pserver; | |
| struct cifs_ses *ses; | |
| struct cifs_tcon *tcon; | |
| struct cifsInodeInfo *cinode; | |
| struct cifsFileInfo *cfile; | |
| cifs_dbg(FYI, "Checking for oplock break\n"); | |
| if (rsp->hdr.Command != SMB2_OPLOCK_BREAK) | |
| return false; | |
| if (rsp->StructureSize != | |
| smb2_rsp_struct_sizes[SMB2_OPLOCK_BREAK_HE]) { | |
| if (le16_to_cpu(rsp->StructureSize) == 44) | |
| return smb2_is_valid_lease_break(buffer, server); | |
| else | |
| return false; | |
| } | |
| cifs_dbg(FYI, "oplock level 0x%x\n", rsp->OplockLevel); | |
| /* If server is a channel, select the primary channel */ | |
| pserver = SERVER_IS_CHAN(server) ? server->primary_server : server; | |
| /* look up tcon based on tid & uid */ | |
| spin_lock(&cifs_tcp_ses_lock); | |
| list_for_each_entry(ses, &pserver->smb_ses_list, smb_ses_list) { | |
| if (cifs_ses_exiting(ses)) | |
| continue; | |
| list_for_each_entry(tcon, &ses->tcon_list, tcon_list) { | |
| spin_lock(&tcon->open_file_lock); | |
| list_for_each_entry(cfile, &tcon->openFileList, tlist) { | |
| if (rsp->PersistentFid != | |
| cfile->fid.persistent_fid || | |
| rsp->VolatileFid != | |
| cfile->fid.volatile_fid) | |
| continue; | |
| cifs_dbg(FYI, "file id match, oplock break\n"); | |
| cifs_stats_inc( | |
| &tcon->stats.cifs_stats.num_oplock_brks); | |
| cinode = CIFS_I(d_inode(cfile->dentry)); | |
| spin_lock(&cfile->file_info_lock); | |
| if (!CIFS_CACHE_WRITE(cinode) && | |
| rsp->OplockLevel == SMB2_OPLOCK_LEVEL_NONE) | |
| cfile->oplock_break_cancelled = true; | |
| else | |
| cfile->oplock_break_cancelled = false; | |
| set_bit(CIFS_INODE_PENDING_OPLOCK_BREAK, | |
| &cinode->flags); | |
| cfile->oplock_epoch = 0; | |
| cfile->oplock_level = rsp->OplockLevel; | |
| spin_unlock(&cfile->file_info_lock); | |
| cifs_queue_oplock_break(cfile); | |
| spin_unlock(&tcon->open_file_lock); | |
| spin_unlock(&cifs_tcp_ses_lock); | |
| return true; | |
| } | |
| spin_unlock(&tcon->open_file_lock); | |
| } | |
| } | |
| spin_unlock(&cifs_tcp_ses_lock); | |
| cifs_dbg(FYI, "No file id matched, oplock break ignored\n"); | |
| trace_smb3_oplock_not_found(0 /* no xid */, rsp->PersistentFid, | |
| le32_to_cpu(rsp->hdr.Id.SyncId.TreeId), | |
| le64_to_cpu(rsp->hdr.SessionId)); | |
| return true; | |
| } | |
| void | |
| smb2_cancelled_close_fid(struct work_struct *work) | |
| { | |
| struct close_cancelled_open *cancelled = container_of(work, | |
| struct close_cancelled_open, work); | |
| struct cifs_tcon *tcon = cancelled->tcon; | |
| int rc; | |
| if (cancelled->mid) | |
| cifs_tcon_dbg(VFS, "Close unmatched open for MID:%llu\n", | |
| cancelled->mid); | |
| else | |
| cifs_tcon_dbg(VFS, "Close interrupted close\n"); | |
| rc = SMB2_close(0, tcon, cancelled->fid.persistent_fid, | |
| cancelled->fid.volatile_fid); | |
| if (rc) | |
| cifs_tcon_dbg(VFS, "Close cancelled mid failed rc:%d\n", rc); | |
| cifs_put_tcon(tcon, netfs_trace_tcon_ref_put_cancelled_close_fid); | |
| kfree(cancelled); | |
| } | |
| /* | |
| * Caller should already has an extra reference to @tcon | |
| * This function is used to queue work to close a handle to prevent leaks | |
| * on the server. | |
| * We handle two cases. If an open was interrupted after we sent the | |
| * SMB2_CREATE to the server but before we processed the reply, and second | |
| * if a close was interrupted before we sent the SMB2_CLOSE to the server. | |
| */ | |
| static int | |
| __smb2_handle_cancelled_cmd(struct cifs_tcon *tcon, __u16 cmd, __u64 mid, | |
| __u64 persistent_fid, __u64 volatile_fid, | |
| bool account_remote_open) | |
| { | |
| struct close_cancelled_open *cancelled; | |
| cancelled = kzalloc_obj(*cancelled); | |
| if (!cancelled) | |
| return -ENOMEM; | |
| cancelled->fid.persistent_fid = persistent_fid; | |
| cancelled->fid.volatile_fid = volatile_fid; | |
| cancelled->tcon = tcon; | |
| cancelled->cmd = cmd; | |
| cancelled->mid = mid; | |
| INIT_WORK(&cancelled->work, smb2_cancelled_close_fid); | |
| if (account_remote_open) | |
| atomic_inc(&tcon->num_remote_opens); | |
| WARN_ON(queue_work(cifsiod_wq, &cancelled->work) == false); | |
| return 0; | |
| } | |
| int | |
| smb2_handle_cancelled_close(struct cifs_tcon *tcon, __u64 persistent_fid, | |
| __u64 volatile_fid) | |
| { | |
| int rc; | |
| cifs_dbg(FYI, "%s: tc_count=%d\n", __func__, tcon->tc_count); | |
| spin_lock(&tcon->tc_lock); | |
| if (tcon->tc_count <= 0) { | |
| struct TCP_Server_Info *server = NULL; | |
| trace_smb3_tcon_ref(tcon->debug_id, tcon->tc_count, | |
| netfs_trace_tcon_ref_see_cancelled_close); | |
| WARN_ONCE(tcon->tc_count < 0, "tcon refcount is negative"); | |
| spin_unlock(&tcon->tc_lock); | |
| if (tcon->ses) { | |
| server = tcon->ses->server; | |
| cifs_server_dbg(FYI, | |
| "tid=0x%x: tcon is closing, skipping async close retry of fid %llu %llu\n", | |
| tcon->tid, persistent_fid, volatile_fid); | |
| } | |
| return 0; | |
| } | |
| tcon->tc_count++; | |
| trace_smb3_tcon_ref(tcon->debug_id, tcon->tc_count, | |
| netfs_trace_tcon_ref_get_cancelled_close); | |
| spin_unlock(&tcon->tc_lock); | |
| rc = __smb2_handle_cancelled_cmd(tcon, SMB2_CLOSE_HE, 0, | |
| persistent_fid, volatile_fid, false); | |
| if (rc) | |
| cifs_put_tcon(tcon, netfs_trace_tcon_ref_put_cancelled_close); | |
| return rc; | |
| } | |
| int | |
| smb2_handle_cancelled_mid(struct mid_q_entry *mid, struct TCP_Server_Info *server) | |
| { | |
| struct smb2_hdr *hdr = mid->resp_buf; | |
| struct smb2_create_rsp *rsp = mid->resp_buf; | |
| struct cifs_tcon *tcon; | |
| int rc; | |
| if ((mid->optype & CIFS_CP_CREATE_CLOSE_OP) || hdr->Command != SMB2_CREATE || | |
| hdr->Status != STATUS_SUCCESS) | |
| return 0; | |
| tcon = smb2_find_smb_tcon(server, le64_to_cpu(hdr->SessionId), | |
| le32_to_cpu(hdr->Id.SyncId.TreeId)); | |
| if (!tcon) | |
| return -ENOENT; | |
| rc = __smb2_handle_cancelled_cmd(tcon, | |
| le16_to_cpu(hdr->Command), | |
| le64_to_cpu(hdr->MessageId), | |
| rsp->PersistentFileId, | |
| rsp->VolatileFileId, true); | |
| if (rc) | |
| cifs_put_tcon(tcon, netfs_trace_tcon_ref_put_cancelled_mid); | |
| return rc; | |
| } | |
| /** | |
| * smb311_update_preauth_hash - update @ses hash with the packet data in @iov | |
| * | |
| * Assumes @iov does not contain the rfc1002 length and iov[0] has the | |
| * SMB2 header. | |
| * | |
| * @ses: server session structure | |
| * @server: pointer to server info | |
| * @iov: array containing the SMB request we will send to the server | |
| * @nvec: number of array entries for the iov | |
| */ | |
| void | |
| smb311_update_preauth_hash(struct cifs_ses *ses, struct TCP_Server_Info *server, | |
| struct kvec *iov, int nvec) | |
| { | |
| int i; | |
| struct smb2_hdr *hdr; | |
| struct sha512_ctx sha_ctx; | |
| hdr = (struct smb2_hdr *)iov[0].iov_base; | |
| /* neg prot are always taken */ | |
| if (hdr->Command == SMB2_NEGOTIATE) | |
| goto ok; | |
| /* | |
| * If we process a command which wasn't a negprot it means the | |
| * neg prot was already done, so the server dialect was set | |
| * and we can test it. Preauth requires 3.1.1 for now. | |
| */ | |
| if (server->dialect != SMB311_PROT_ID) | |
| return; | |
| if (hdr->Command != SMB2_SESSION_SETUP) | |
| return; | |
| /* skip last sess setup response */ | |
| if ((hdr->Flags & SMB2_FLAGS_SERVER_TO_REDIR) | |
| && (hdr->Status == NT_STATUS_OK | |
| || (hdr->Status != | |
| cpu_to_le32(NT_STATUS_MORE_PROCESSING_REQUIRED)))) | |
| return; | |
| ok: | |
| sha512_init(&sha_ctx); | |
| sha512_update(&sha_ctx, ses->preauth_sha_hash, SMB2_PREAUTH_HASH_SIZE); | |
| for (i = 0; i < nvec; i++) | |
| sha512_update(&sha_ctx, iov[i].iov_base, iov[i].iov_len); | |
| sha512_final(&sha_ctx, ses->preauth_sha_hash); | |
| } |