| /* | |
| * JFFS2 -- Journalling Flash File System, Version 2. | |
| * | |
| * Copyright © 2001-2007 Red Hat, Inc. | |
| * Copyright © 2004-2010 David Woodhouse <dwmw2@infradead.org> | |
| * | |
| * Created by David Woodhouse <dwmw2@infradead.org> | |
| * | |
| * For licensing information, see the file 'LICENCE' in this directory. | |
| * | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/slab.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/mtd/mtd.h> | |
| #include <linux/mm.h> /* kvfree() */ | |
| #include "nodelist.h" | |
| static void jffs2_build_remove_unlinked_inode(struct jffs2_sb_info *, | |
| struct jffs2_inode_cache *, struct jffs2_full_dirent **); | |
| static inline struct jffs2_inode_cache * | |
| first_inode_chain(int *i, struct jffs2_sb_info *c) | |
| { | |
| for (; *i < c->inocache_hashsize; (*i)++) { | |
| if (c->inocache_list[*i]) | |
| return c->inocache_list[*i]; | |
| } | |
| return NULL; | |
| } | |
| static inline struct jffs2_inode_cache * | |
| next_inode(int *i, struct jffs2_inode_cache *ic, struct jffs2_sb_info *c) | |
| { | |
| /* More in this chain? */ | |
| if (ic->next) | |
| return ic->next; | |
| (*i)++; | |
| return first_inode_chain(i, c); | |
| } | |
| #define for_each_inode(i, c, ic) \ | |
| for (i = 0, ic = first_inode_chain(&i, (c)); \ | |
| ic; \ | |
| ic = next_inode(&i, ic, (c))) | |
| static void jffs2_build_inode_pass1(struct jffs2_sb_info *c, | |
| struct jffs2_inode_cache *ic, | |
| int *dir_hardlinks) | |
| { | |
| struct jffs2_full_dirent *fd; | |
| dbg_fsbuild("building directory inode #%u\n", ic->ino); | |
| /* For each child, increase nlink */ | |
| for(fd = ic->scan_dents; fd; fd = fd->next) { | |
| struct jffs2_inode_cache *child_ic; | |
| if (!fd->ino) | |
| continue; | |
| /* we can get high latency here with huge directories */ | |
| child_ic = jffs2_get_ino_cache(c, fd->ino); | |
| if (!child_ic) { | |
| dbg_fsbuild("child \"%s\" (ino #%u) of dir ino #%u doesn't exist!\n", | |
| fd->name, fd->ino, ic->ino); | |
| jffs2_mark_node_obsolete(c, fd->raw); | |
| /* Clear the ic/raw union so it doesn't cause problems later. */ | |
| fd->ic = NULL; | |
| continue; | |
| } | |
| /* From this point, fd->raw is no longer used so we can set fd->ic */ | |
| fd->ic = child_ic; | |
| child_ic->pino_nlink++; | |
| /* If we appear (at this stage) to have hard-linked directories, | |
| * set a flag to trigger a scan later */ | |
| if (fd->type == DT_DIR) { | |
| child_ic->flags |= INO_FLAGS_IS_DIR; | |
| if (child_ic->pino_nlink > 1) | |
| *dir_hardlinks = 1; | |
| } | |
| dbg_fsbuild("increased nlink for child \"%s\" (ino #%u)\n", fd->name, fd->ino); | |
| /* Can't free scan_dents so far. We might need them in pass 2 */ | |
| } | |
| } | |
| /* Scan plan: | |
| - Scan physical nodes. Build map of inodes/dirents. Allocate inocaches as we go | |
| - Scan directory tree from top down, setting nlink in inocaches | |
| - Scan inocaches for inodes with nlink==0 | |
| */ | |
| static int jffs2_build_filesystem(struct jffs2_sb_info *c) | |
| { | |
| int ret, i, dir_hardlinks = 0; | |
| struct jffs2_inode_cache *ic; | |
| struct jffs2_full_dirent *fd; | |
| struct jffs2_full_dirent *dead_fds = NULL; | |
| dbg_fsbuild("build FS data structures\n"); | |
| /* First, scan the medium and build all the inode caches with | |
| lists of physical nodes */ | |
| c->flags |= JFFS2_SB_FLAG_SCANNING; | |
| ret = jffs2_scan_medium(c); | |
| c->flags &= ~JFFS2_SB_FLAG_SCANNING; | |
| if (ret) | |
| goto exit; | |
| dbg_fsbuild("scanned flash completely\n"); | |
| jffs2_dbg_dump_block_lists_nolock(c); | |
| dbg_fsbuild("pass 1 starting\n"); | |
| c->flags |= JFFS2_SB_FLAG_BUILDING; | |
| /* Now scan the directory tree, increasing nlink according to every dirent found. */ | |
| for_each_inode(i, c, ic) { | |
| if (ic->scan_dents) { | |
| jffs2_build_inode_pass1(c, ic, &dir_hardlinks); | |
| cond_resched(); | |
| } | |
| } | |
| dbg_fsbuild("pass 1 complete\n"); | |
| /* Next, scan for inodes with nlink == 0 and remove them. If | |
| they were directories, then decrement the nlink of their | |
| children too, and repeat the scan. As that's going to be | |
| a fairly uncommon occurrence, it's not so evil to do it this | |
| way. Recursion bad. */ | |
| dbg_fsbuild("pass 2 starting\n"); | |
| for_each_inode(i, c, ic) { | |
| if (ic->pino_nlink) | |
| continue; | |
| jffs2_build_remove_unlinked_inode(c, ic, &dead_fds); | |
| cond_resched(); | |
| } | |
| dbg_fsbuild("pass 2a starting\n"); | |
| while (dead_fds) { | |
| fd = dead_fds; | |
| dead_fds = fd->next; | |
| ic = jffs2_get_ino_cache(c, fd->ino); | |
| if (ic) | |
| jffs2_build_remove_unlinked_inode(c, ic, &dead_fds); | |
| jffs2_free_full_dirent(fd); | |
| } | |
| dbg_fsbuild("pass 2a complete\n"); | |
| if (dir_hardlinks) { | |
| /* If we detected directory hardlinks earlier, *hopefully* | |
| * they are gone now because some of the links were from | |
| * dead directories which still had some old dirents lying | |
| * around and not yet garbage-collected, but which have | |
| * been discarded above. So clear the pino_nlink field | |
| * in each directory, so that the final scan below can | |
| * print appropriate warnings. */ | |
| for_each_inode(i, c, ic) { | |
| if (ic->flags & INO_FLAGS_IS_DIR) | |
| ic->pino_nlink = 0; | |
| } | |
| } | |
| dbg_fsbuild("freeing temporary data structures\n"); | |
| /* Finally, we can scan again and free the dirent structs */ | |
| for_each_inode(i, c, ic) { | |
| while(ic->scan_dents) { | |
| fd = ic->scan_dents; | |
| ic->scan_dents = fd->next; | |
| /* We do use the pino_nlink field to count nlink of | |
| * directories during fs build, so set it to the | |
| * parent ino# now. Now that there's hopefully only | |
| * one. */ | |
| if (fd->type == DT_DIR) { | |
| if (!fd->ic) { | |
| /* We'll have complained about it and marked the coresponding | |
| raw node obsolete already. Just skip it. */ | |
| continue; | |
| } | |
| /* We *have* to have set this in jffs2_build_inode_pass1() */ | |
| BUG_ON(!(fd->ic->flags & INO_FLAGS_IS_DIR)); | |
| /* We clear ic->pino_nlink ∀ directories' ic *only* if dir_hardlinks | |
| * is set. Otherwise, we know this should never trigger anyway, so | |
| * we don't do the check. And ic->pino_nlink still contains the nlink | |
| * value (which is 1). */ | |
| if (dir_hardlinks && fd->ic->pino_nlink) { | |
| JFFS2_ERROR("child dir \"%s\" (ino #%u) of dir ino #%u is also hard linked from dir ino #%u\n", | |
| fd->name, fd->ino, ic->ino, fd->ic->pino_nlink); | |
| /* Should we unlink it from its previous parent? */ | |
| } | |
| /* For directories, ic->pino_nlink holds that parent inode # */ | |
| fd->ic->pino_nlink = ic->ino; | |
| } | |
| jffs2_free_full_dirent(fd); | |
| } | |
| ic->scan_dents = NULL; | |
| cond_resched(); | |
| } | |
| ret = jffs2_build_xattr_subsystem(c); | |
| if (ret) | |
| goto exit; | |
| c->flags &= ~JFFS2_SB_FLAG_BUILDING; | |
| dbg_fsbuild("FS build complete\n"); | |
| /* Rotate the lists by some number to ensure wear levelling */ | |
| jffs2_rotate_lists(c); | |
| ret = 0; | |
| exit: | |
| if (ret) { | |
| for_each_inode(i, c, ic) { | |
| while(ic->scan_dents) { | |
| fd = ic->scan_dents; | |
| ic->scan_dents = fd->next; | |
| jffs2_free_full_dirent(fd); | |
| } | |
| } | |
| jffs2_clear_xattr_subsystem(c); | |
| } | |
| return ret; | |
| } | |
| static void jffs2_build_remove_unlinked_inode(struct jffs2_sb_info *c, | |
| struct jffs2_inode_cache *ic, | |
| struct jffs2_full_dirent **dead_fds) | |
| { | |
| struct jffs2_raw_node_ref *raw; | |
| struct jffs2_full_dirent *fd; | |
| dbg_fsbuild("removing ino #%u with nlink == zero.\n", ic->ino); | |
| raw = ic->nodes; | |
| while (raw != (void *)ic) { | |
| struct jffs2_raw_node_ref *next = raw->next_in_ino; | |
| dbg_fsbuild("obsoleting node at 0x%08x\n", ref_offset(raw)); | |
| jffs2_mark_node_obsolete(c, raw); | |
| raw = next; | |
| } | |
| if (ic->scan_dents) { | |
| int whinged = 0; | |
| dbg_fsbuild("inode #%u was a directory which may have children...\n", ic->ino); | |
| while(ic->scan_dents) { | |
| struct jffs2_inode_cache *child_ic; | |
| fd = ic->scan_dents; | |
| ic->scan_dents = fd->next; | |
| if (!fd->ino) { | |
| /* It's a deletion dirent. Ignore it */ | |
| dbg_fsbuild("child \"%s\" is a deletion dirent, skipping...\n", fd->name); | |
| jffs2_free_full_dirent(fd); | |
| continue; | |
| } | |
| if (!whinged) | |
| whinged = 1; | |
| dbg_fsbuild("removing child \"%s\", ino #%u\n", fd->name, fd->ino); | |
| child_ic = jffs2_get_ino_cache(c, fd->ino); | |
| if (!child_ic) { | |
| dbg_fsbuild("cannot remove child \"%s\", ino #%u, because it doesn't exist\n", | |
| fd->name, fd->ino); | |
| jffs2_free_full_dirent(fd); | |
| continue; | |
| } | |
| /* Reduce nlink of the child. If it's now zero, stick it on the | |
| dead_fds list to be cleaned up later. Else just free the fd */ | |
| child_ic->pino_nlink--; | |
| if (!child_ic->pino_nlink) { | |
| dbg_fsbuild("inode #%u (\"%s\") now has no links; adding to dead_fds list.\n", | |
| fd->ino, fd->name); | |
| fd->next = *dead_fds; | |
| *dead_fds = fd; | |
| } else { | |
| dbg_fsbuild("inode #%u (\"%s\") has now got nlink %d. Ignoring.\n", | |
| fd->ino, fd->name, child_ic->pino_nlink); | |
| jffs2_free_full_dirent(fd); | |
| } | |
| } | |
| } | |
| /* | |
| We don't delete the inocache from the hash list and free it yet. | |
| The erase code will do that, when all the nodes are completely gone. | |
| */ | |
| } | |
| static void jffs2_calc_trigger_levels(struct jffs2_sb_info *c) | |
| { | |
| uint32_t size; | |
| /* Deletion should almost _always_ be allowed. We're fairly | |
| buggered once we stop allowing people to delete stuff | |
| because there's not enough free space... */ | |
| c->resv_blocks_deletion = 2; | |
| /* Be conservative about how much space we need before we allow writes. | |
| On top of that which is required for deletia, require an extra 2% | |
| of the medium to be available, for overhead caused by nodes being | |
| split across blocks, etc. */ | |
| size = c->flash_size / 50; /* 2% of flash size */ | |
| size += c->nr_blocks * 100; /* And 100 bytes per eraseblock */ | |
| size += c->sector_size - 1; /* ... and round up */ | |
| c->resv_blocks_write = c->resv_blocks_deletion + (size / c->sector_size); | |
| /* When do we let the GC thread run in the background */ | |
| c->resv_blocks_gctrigger = c->resv_blocks_write + 1; | |
| /* When do we allow garbage collection to merge nodes to make | |
| long-term progress at the expense of short-term space exhaustion? */ | |
| c->resv_blocks_gcmerge = c->resv_blocks_deletion + 1; | |
| /* When do we allow garbage collection to eat from bad blocks rather | |
| than actually making progress? */ | |
| c->resv_blocks_gcbad = 0;//c->resv_blocks_deletion + 2; | |
| /* What number of 'very dirty' eraseblocks do we allow before we | |
| trigger the GC thread even if we don't _need_ the space. When we | |
| can't mark nodes obsolete on the medium, the old dirty nodes cause | |
| performance problems because we have to inspect and discard them. */ | |
| c->vdirty_blocks_gctrigger = c->resv_blocks_gctrigger; | |
| if (jffs2_can_mark_obsolete(c)) | |
| c->vdirty_blocks_gctrigger *= 10; | |
| /* If there's less than this amount of dirty space, don't bother | |
| trying to GC to make more space. It'll be a fruitless task */ | |
| c->nospc_dirty_size = c->sector_size + (c->flash_size / 100); | |
| dbg_fsbuild("trigger levels (size %d KiB, block size %d KiB, %d blocks)\n", | |
| c->flash_size / 1024, c->sector_size / 1024, c->nr_blocks); | |
| dbg_fsbuild("Blocks required to allow deletion: %d (%d KiB)\n", | |
| c->resv_blocks_deletion, c->resv_blocks_deletion*c->sector_size/1024); | |
| dbg_fsbuild("Blocks required to allow writes: %d (%d KiB)\n", | |
| c->resv_blocks_write, c->resv_blocks_write*c->sector_size/1024); | |
| dbg_fsbuild("Blocks required to quiesce GC thread: %d (%d KiB)\n", | |
| c->resv_blocks_gctrigger, c->resv_blocks_gctrigger*c->sector_size/1024); | |
| dbg_fsbuild("Blocks required to allow GC merges: %d (%d KiB)\n", | |
| c->resv_blocks_gcmerge, c->resv_blocks_gcmerge*c->sector_size/1024); | |
| dbg_fsbuild("Blocks required to GC bad blocks: %d (%d KiB)\n", | |
| c->resv_blocks_gcbad, c->resv_blocks_gcbad*c->sector_size/1024); | |
| dbg_fsbuild("Amount of dirty space required to GC: %d bytes\n", | |
| c->nospc_dirty_size); | |
| dbg_fsbuild("Very dirty blocks before GC triggered: %d\n", | |
| c->vdirty_blocks_gctrigger); | |
| } | |
| int jffs2_do_mount_fs(struct jffs2_sb_info *c) | |
| { | |
| int ret; | |
| int i; | |
| int size; | |
| c->free_size = c->flash_size; | |
| c->nr_blocks = c->flash_size / c->sector_size; | |
| size = sizeof(struct jffs2_eraseblock) * c->nr_blocks; | |
| #ifndef __ECOS | |
| if (jffs2_blocks_use_vmalloc(c)) | |
| c->blocks = vzalloc(size); | |
| else | |
| #endif | |
| c->blocks = kzalloc(size, GFP_KERNEL); | |
| if (!c->blocks) | |
| return -ENOMEM; | |
| for (i=0; i<c->nr_blocks; i++) { | |
| INIT_LIST_HEAD(&c->blocks[i].list); | |
| c->blocks[i].offset = i * c->sector_size; | |
| c->blocks[i].free_size = c->sector_size; | |
| } | |
| INIT_LIST_HEAD(&c->clean_list); | |
| INIT_LIST_HEAD(&c->very_dirty_list); | |
| INIT_LIST_HEAD(&c->dirty_list); | |
| INIT_LIST_HEAD(&c->erasable_list); | |
| INIT_LIST_HEAD(&c->erasing_list); | |
| INIT_LIST_HEAD(&c->erase_checking_list); | |
| INIT_LIST_HEAD(&c->erase_pending_list); | |
| INIT_LIST_HEAD(&c->erasable_pending_wbuf_list); | |
| INIT_LIST_HEAD(&c->erase_complete_list); | |
| INIT_LIST_HEAD(&c->free_list); | |
| INIT_LIST_HEAD(&c->bad_list); | |
| INIT_LIST_HEAD(&c->bad_used_list); | |
| c->highest_ino = 1; | |
| c->summary = NULL; | |
| ret = jffs2_sum_init(c); | |
| if (ret) | |
| goto out_free; | |
| if (jffs2_build_filesystem(c)) { | |
| dbg_fsbuild("build_fs failed\n"); | |
| jffs2_free_ino_caches(c); | |
| jffs2_free_raw_node_refs(c); | |
| ret = -EIO; | |
| goto out_sum_exit; | |
| } | |
| jffs2_calc_trigger_levels(c); | |
| return 0; | |
| out_sum_exit: | |
| jffs2_sum_exit(c); | |
| out_free: | |
| kvfree(c->blocks); | |
| return ret; | |
| } |