| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (C) 2007 Oracle. All rights reserved. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/bio.h> | |
| #include <linux/blk-cgroup.h> | |
| #include <linux/file.h> | |
| #include <linux/filelock.h> | |
| #include <linux/fs.h> | |
| #include <linux/fs_struct.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/highmem.h> | |
| #include <linux/time.h> | |
| #include <linux/init.h> | |
| #include <linux/string.h> | |
| #include <linux/backing-dev.h> | |
| #include <linux/writeback.h> | |
| #include <linux/compat.h> | |
| #include <linux/xattr.h> | |
| #include <linux/posix_acl.h> | |
| #include <linux/falloc.h> | |
| #include <linux/slab.h> | |
| #include <linux/ratelimit.h> | |
| #include <linux/btrfs.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/posix_acl_xattr.h> | |
| #include <linux/uio.h> | |
| #include <linux/magic.h> | |
| #include <linux/iversion.h> | |
| #include <linux/swap.h> | |
| #include <linux/migrate.h> | |
| #include <linux/sched/mm.h> | |
| #include <linux/iomap.h> | |
| #include <linux/unaligned.h> | |
| #include "misc.h" | |
| #include "ctree.h" | |
| #include "disk-io.h" | |
| #include "transaction.h" | |
| #include "btrfs_inode.h" | |
| #include "ordered-data.h" | |
| #include "xattr.h" | |
| #include "tree-log.h" | |
| #include "bio.h" | |
| #include "compression.h" | |
| #include "locking.h" | |
| #include "props.h" | |
| #include "qgroup.h" | |
| #include "delalloc-space.h" | |
| #include "block-group.h" | |
| #include "space-info.h" | |
| #include "zoned.h" | |
| #include "subpage.h" | |
| #include "inode-item.h" | |
| #include "fs.h" | |
| #include "accessors.h" | |
| #include "extent-tree.h" | |
| #include "root-tree.h" | |
| #include "defrag.h" | |
| #include "dir-item.h" | |
| #include "file-item.h" | |
| #include "uuid-tree.h" | |
| #include "ioctl.h" | |
| #include "file.h" | |
| #include "acl.h" | |
| #include "relocation.h" | |
| #include "verity.h" | |
| #include "super.h" | |
| #include "orphan.h" | |
| #include "backref.h" | |
| #include "raid-stripe-tree.h" | |
| #include "fiemap.h" | |
| #include "delayed-inode.h" | |
| #define COW_FILE_RANGE_KEEP_LOCKED (1UL << 0) | |
| struct btrfs_iget_args { | |
| u64 ino; | |
| struct btrfs_root *root; | |
| }; | |
| struct btrfs_rename_ctx { | |
| /* Output field. Stores the index number of the old directory entry. */ | |
| u64 index; | |
| }; | |
| /* | |
| * Used by data_reloc_print_warning_inode() to pass needed info for filename | |
| * resolution and output of error message. | |
| */ | |
| struct data_reloc_warn { | |
| struct btrfs_path path; | |
| struct btrfs_fs_info *fs_info; | |
| u64 extent_item_size; | |
| u64 logical; | |
| int mirror_num; | |
| }; | |
| /* | |
| * For the file_extent_tree, we want to hold the inode lock when we lookup and | |
| * update the disk_i_size, but lockdep will complain because our io_tree we hold | |
| * the tree lock and get the inode lock when setting delalloc. These two things | |
| * are unrelated, so make a class for the file_extent_tree so we don't get the | |
| * two locking patterns mixed up. | |
| */ | |
| static struct lock_class_key file_extent_tree_class; | |
| static const struct inode_operations btrfs_dir_inode_operations; | |
| static const struct inode_operations btrfs_symlink_inode_operations; | |
| static const struct inode_operations btrfs_special_inode_operations; | |
| static const struct inode_operations btrfs_file_inode_operations; | |
| static const struct address_space_operations btrfs_aops; | |
| static const struct file_operations btrfs_dir_file_operations; | |
| static struct kmem_cache *btrfs_inode_cachep; | |
| static int btrfs_setsize(struct inode *inode, struct iattr *attr); | |
| static int btrfs_truncate(struct btrfs_inode *inode, bool skip_writeback); | |
| static noinline int run_delalloc_cow(struct btrfs_inode *inode, | |
| struct folio *locked_folio, u64 start, | |
| u64 end, struct writeback_control *wbc, | |
| bool pages_dirty); | |
| static int data_reloc_print_warning_inode(u64 inum, u64 offset, u64 num_bytes, | |
| u64 root, void *warn_ctx) | |
| { | |
| struct data_reloc_warn *warn = warn_ctx; | |
| struct btrfs_fs_info *fs_info = warn->fs_info; | |
| struct extent_buffer *eb; | |
| struct btrfs_inode_item *inode_item; | |
| struct inode_fs_paths *ipath __free(inode_fs_paths) = NULL; | |
| struct btrfs_root *local_root; | |
| struct btrfs_key key; | |
| unsigned int nofs_flag; | |
| u32 nlink; | |
| int ret; | |
| local_root = btrfs_get_fs_root(fs_info, root, true); | |
| if (IS_ERR(local_root)) { | |
| ret = PTR_ERR(local_root); | |
| goto err; | |
| } | |
| /* This makes the path point to (inum INODE_ITEM ioff). */ | |
| key.objectid = inum; | |
| key.type = BTRFS_INODE_ITEM_KEY; | |
| key.offset = 0; | |
| ret = btrfs_search_slot(NULL, local_root, &key, &warn->path, 0, 0); | |
| if (ret) { | |
| btrfs_put_root(local_root); | |
| btrfs_release_path(&warn->path); | |
| goto err; | |
| } | |
| eb = warn->path.nodes[0]; | |
| inode_item = btrfs_item_ptr(eb, warn->path.slots[0], struct btrfs_inode_item); | |
| nlink = btrfs_inode_nlink(eb, inode_item); | |
| btrfs_release_path(&warn->path); | |
| nofs_flag = memalloc_nofs_save(); | |
| ipath = init_ipath(4096, local_root, &warn->path); | |
| memalloc_nofs_restore(nofs_flag); | |
| if (IS_ERR(ipath)) { | |
| btrfs_put_root(local_root); | |
| ret = PTR_ERR(ipath); | |
| ipath = NULL; | |
| /* | |
| * -ENOMEM, not a critical error, just output an generic error | |
| * without filename. | |
| */ | |
| btrfs_warn(fs_info, | |
| "checksum error at logical %llu mirror %u root %llu, inode %llu offset %llu", | |
| warn->logical, warn->mirror_num, root, inum, offset); | |
| return ret; | |
| } | |
| ret = paths_from_inode(inum, ipath); | |
| if (ret < 0) { | |
| btrfs_put_root(local_root); | |
| goto err; | |
| } | |
| /* | |
| * We deliberately ignore the bit ipath might have been too small to | |
| * hold all of the paths here | |
| */ | |
| for (int i = 0; i < ipath->fspath->elem_cnt; i++) { | |
| btrfs_warn(fs_info, | |
| "checksum error at logical %llu mirror %u root %llu inode %llu offset %llu length %u links %u (path: %s)", | |
| warn->logical, warn->mirror_num, root, inum, offset, | |
| fs_info->sectorsize, nlink, | |
| (char *)(unsigned long)ipath->fspath->val[i]); | |
| } | |
| btrfs_put_root(local_root); | |
| return 0; | |
| err: | |
| btrfs_warn(fs_info, | |
| "checksum error at logical %llu mirror %u root %llu inode %llu offset %llu, path resolving failed with ret=%d", | |
| warn->logical, warn->mirror_num, root, inum, offset, ret); | |
| return ret; | |
| } | |
| /* | |
| * Do extra user-friendly error output (e.g. lookup all the affected files). | |
| * | |
| * Return true if we succeeded doing the backref lookup. | |
| * Return false if such lookup failed, and has to fallback to the old error message. | |
| */ | |
| static void print_data_reloc_error(const struct btrfs_inode *inode, u64 file_off, | |
| const u8 *csum, const u8 *csum_expected, | |
| int mirror_num) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| BTRFS_PATH_AUTO_RELEASE(path); | |
| struct btrfs_key found_key = { 0 }; | |
| struct extent_buffer *eb; | |
| struct btrfs_extent_item *ei; | |
| const u32 csum_size = fs_info->csum_size; | |
| u64 logical; | |
| u64 flags; | |
| u32 item_size; | |
| int ret; | |
| logical = btrfs_get_reloc_bg_bytenr(fs_info); | |
| if (logical == U64_MAX) { | |
| btrfs_warn_rl(fs_info, "has data reloc tree but no running relocation"); | |
| btrfs_warn_rl(fs_info, | |
| "csum failed root %lld ino %llu off %llu csum " BTRFS_CSUM_FMT " expected csum " BTRFS_CSUM_FMT " mirror %d", | |
| btrfs_root_id(inode->root), btrfs_ino(inode), file_off, | |
| BTRFS_CSUM_FMT_VALUE(csum_size, csum), | |
| BTRFS_CSUM_FMT_VALUE(csum_size, csum_expected), | |
| mirror_num); | |
| return; | |
| } | |
| logical += file_off; | |
| btrfs_warn_rl(fs_info, | |
| "csum failed root %lld ino %llu off %llu logical %llu csum " BTRFS_CSUM_FMT " expected csum " BTRFS_CSUM_FMT " mirror %d", | |
| btrfs_root_id(inode->root), | |
| btrfs_ino(inode), file_off, logical, | |
| BTRFS_CSUM_FMT_VALUE(csum_size, csum), | |
| BTRFS_CSUM_FMT_VALUE(csum_size, csum_expected), | |
| mirror_num); | |
| ret = extent_from_logical(fs_info, logical, &path, &found_key, &flags); | |
| if (ret < 0) { | |
| btrfs_err_rl(fs_info, "failed to lookup extent item for logical %llu: %pe", | |
| logical, ERR_PTR(ret)); | |
| return; | |
| } | |
| eb = path.nodes[0]; | |
| ei = btrfs_item_ptr(eb, path.slots[0], struct btrfs_extent_item); | |
| item_size = btrfs_item_size(eb, path.slots[0]); | |
| if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) { | |
| unsigned long ptr = 0; | |
| u64 ref_root; | |
| u8 ref_level; | |
| while (true) { | |
| ret = tree_backref_for_extent(&ptr, eb, &found_key, ei, | |
| item_size, &ref_root, | |
| &ref_level); | |
| if (ret < 0) { | |
| btrfs_warn_rl(fs_info, | |
| "failed to resolve tree backref for logical %llu: %d", | |
| logical, ret); | |
| break; | |
| } | |
| if (ret > 0) | |
| break; | |
| btrfs_warn_rl(fs_info, | |
| "csum error at logical %llu mirror %u: metadata %s (level %d) in tree %llu", | |
| logical, mirror_num, | |
| (ref_level ? "node" : "leaf"), | |
| ref_level, ref_root); | |
| } | |
| } else { | |
| struct btrfs_backref_walk_ctx ctx = { 0 }; | |
| struct data_reloc_warn reloc_warn = { 0 }; | |
| /* | |
| * Do not hold the path as later iterate_extent_inodes() call | |
| * can be time consuming. | |
| */ | |
| btrfs_release_path(&path); | |
| ctx.bytenr = found_key.objectid; | |
| ctx.extent_item_pos = logical - found_key.objectid; | |
| ctx.fs_info = fs_info; | |
| reloc_warn.logical = logical; | |
| reloc_warn.extent_item_size = found_key.offset; | |
| reloc_warn.mirror_num = mirror_num; | |
| reloc_warn.fs_info = fs_info; | |
| iterate_extent_inodes(&ctx, true, | |
| data_reloc_print_warning_inode, &reloc_warn); | |
| } | |
| } | |
| static void __cold btrfs_print_data_csum_error(struct btrfs_inode *inode, | |
| u64 logical_start, u8 *csum, u8 *csum_expected, int mirror_num) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| const u32 csum_size = root->fs_info->csum_size; | |
| /* For data reloc tree, it's better to do a backref lookup instead. */ | |
| if (btrfs_is_data_reloc_root(root)) | |
| return print_data_reloc_error(inode, logical_start, csum, | |
| csum_expected, mirror_num); | |
| /* Output without objectid, which is more meaningful */ | |
| if (btrfs_root_id(root) >= BTRFS_LAST_FREE_OBJECTID) { | |
| btrfs_warn_rl(root->fs_info, | |
| "csum failed root %lld ino %lld off %llu csum " BTRFS_CSUM_FMT " expected csum " BTRFS_CSUM_FMT " mirror %d", | |
| btrfs_root_id(root), btrfs_ino(inode), | |
| logical_start, | |
| BTRFS_CSUM_FMT_VALUE(csum_size, csum), | |
| BTRFS_CSUM_FMT_VALUE(csum_size, csum_expected), | |
| mirror_num); | |
| } else { | |
| btrfs_warn_rl(root->fs_info, | |
| "csum failed root %llu ino %llu off %llu csum " BTRFS_CSUM_FMT " expected csum " BTRFS_CSUM_FMT " mirror %d", | |
| btrfs_root_id(root), btrfs_ino(inode), | |
| logical_start, | |
| BTRFS_CSUM_FMT_VALUE(csum_size, csum), | |
| BTRFS_CSUM_FMT_VALUE(csum_size, csum_expected), | |
| mirror_num); | |
| } | |
| } | |
| /* | |
| * Lock inode i_rwsem based on arguments passed. | |
| * | |
| * ilock_flags can have the following bit set: | |
| * | |
| * BTRFS_ILOCK_SHARED - acquire a shared lock on the inode | |
| * BTRFS_ILOCK_TRY - try to acquire the lock, if fails on first attempt | |
| * return -EAGAIN | |
| * BTRFS_ILOCK_MMAP - acquire a write lock on the i_mmap_lock | |
| */ | |
| int btrfs_inode_lock(struct btrfs_inode *inode, unsigned int ilock_flags) | |
| { | |
| if (ilock_flags & BTRFS_ILOCK_SHARED) { | |
| if (ilock_flags & BTRFS_ILOCK_TRY) { | |
| if (!inode_trylock_shared(&inode->vfs_inode)) | |
| return -EAGAIN; | |
| else | |
| return 0; | |
| } | |
| inode_lock_shared(&inode->vfs_inode); | |
| } else { | |
| if (ilock_flags & BTRFS_ILOCK_TRY) { | |
| if (!inode_trylock(&inode->vfs_inode)) | |
| return -EAGAIN; | |
| else | |
| return 0; | |
| } | |
| inode_lock(&inode->vfs_inode); | |
| } | |
| if (ilock_flags & BTRFS_ILOCK_MMAP) | |
| down_write(&inode->i_mmap_lock); | |
| return 0; | |
| } | |
| /* | |
| * Unlock inode i_rwsem. | |
| * | |
| * ilock_flags should contain the same bits set as passed to btrfs_inode_lock() | |
| * to decide whether the lock acquired is shared or exclusive. | |
| */ | |
| void btrfs_inode_unlock(struct btrfs_inode *inode, unsigned int ilock_flags) | |
| { | |
| if (ilock_flags & BTRFS_ILOCK_MMAP) | |
| up_write(&inode->i_mmap_lock); | |
| if (ilock_flags & BTRFS_ILOCK_SHARED) | |
| inode_unlock_shared(&inode->vfs_inode); | |
| else | |
| inode_unlock(&inode->vfs_inode); | |
| } | |
| /* | |
| * Cleanup all submitted ordered extents in specified range to handle errors | |
| * from the btrfs_run_delalloc_range() callback. | |
| * | |
| * NOTE: caller must ensure that when an error happens, it can not call | |
| * extent_clear_unlock_delalloc() to clear both the bits EXTENT_DO_ACCOUNTING | |
| * and EXTENT_DELALLOC simultaneously, because that causes the reserved metadata | |
| * to be released, which we want to happen only when finishing the ordered | |
| * extent (btrfs_finish_ordered_io()). | |
| */ | |
| static inline void btrfs_cleanup_ordered_extents(struct btrfs_inode *inode, | |
| u64 offset, u64 bytes) | |
| { | |
| return btrfs_mark_ordered_io_finished(inode, offset, bytes, false); | |
| } | |
| static int btrfs_dirty_inode(struct btrfs_inode *inode); | |
| static int btrfs_init_inode_security(struct btrfs_trans_handle *trans, | |
| struct btrfs_new_inode_args *args) | |
| { | |
| int ret; | |
| if (args->default_acl) { | |
| ret = __btrfs_set_acl(trans, args->inode, args->default_acl, | |
| ACL_TYPE_DEFAULT); | |
| if (ret) | |
| return ret; | |
| } | |
| if (args->acl) { | |
| ret = __btrfs_set_acl(trans, args->inode, args->acl, ACL_TYPE_ACCESS); | |
| if (ret) | |
| return ret; | |
| } | |
| if (!args->default_acl && !args->acl) | |
| cache_no_acl(args->inode); | |
| return btrfs_xattr_security_init(trans, args->inode, args->dir, | |
| &args->dentry->d_name); | |
| } | |
| /* | |
| * this does all the hard work for inserting an inline extent into | |
| * the btree. The caller should have done a btrfs_drop_extents so that | |
| * no overlapping inline items exist in the btree | |
| */ | |
| static int insert_inline_extent(struct btrfs_trans_handle *trans, | |
| struct btrfs_path *path, | |
| struct btrfs_inode *inode, bool extent_inserted, | |
| size_t size, size_t compressed_size, | |
| int compress_type, | |
| struct folio *compressed_folio, | |
| bool update_i_size) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| struct extent_buffer *leaf; | |
| const u32 sectorsize = trans->fs_info->sectorsize; | |
| char *kaddr; | |
| unsigned long ptr; | |
| struct btrfs_file_extent_item *ei; | |
| int ret; | |
| size_t cur_size = size; | |
| u64 i_size; | |
| /* | |
| * The decompressed size must still be no larger than a sector. Under | |
| * heavy race, we can have size == 0 passed in, but that shouldn't be a | |
| * big deal and we can continue the insertion. | |
| */ | |
| ASSERT(size <= sectorsize); | |
| /* | |
| * The compressed size also needs to be no larger than a page. | |
| * That's also why we only need one folio as the parameter. | |
| */ | |
| if (compressed_folio) { | |
| ASSERT(compressed_size <= sectorsize); | |
| ASSERT(compressed_size <= PAGE_SIZE); | |
| } else { | |
| ASSERT(compressed_size == 0); | |
| } | |
| if (compressed_size && compressed_folio) | |
| cur_size = compressed_size; | |
| if (!extent_inserted) { | |
| struct btrfs_key key; | |
| size_t datasize; | |
| key.objectid = btrfs_ino(inode); | |
| key.type = BTRFS_EXTENT_DATA_KEY; | |
| key.offset = 0; | |
| datasize = btrfs_file_extent_calc_inline_size(cur_size); | |
| ret = btrfs_insert_empty_item(trans, root, path, &key, | |
| datasize); | |
| if (ret) | |
| return ret; | |
| } | |
| leaf = path->nodes[0]; | |
| ei = btrfs_item_ptr(leaf, path->slots[0], | |
| struct btrfs_file_extent_item); | |
| btrfs_set_file_extent_generation(leaf, ei, trans->transid); | |
| btrfs_set_file_extent_type(leaf, ei, BTRFS_FILE_EXTENT_INLINE); | |
| btrfs_set_file_extent_encryption(leaf, ei, 0); | |
| btrfs_set_file_extent_other_encoding(leaf, ei, 0); | |
| btrfs_set_file_extent_ram_bytes(leaf, ei, size); | |
| ptr = btrfs_file_extent_inline_start(ei); | |
| if (compress_type != BTRFS_COMPRESS_NONE) { | |
| kaddr = kmap_local_folio(compressed_folio, 0); | |
| write_extent_buffer(leaf, kaddr, ptr, compressed_size); | |
| kunmap_local(kaddr); | |
| btrfs_set_file_extent_compression(leaf, ei, | |
| compress_type); | |
| } else { | |
| struct folio *folio; | |
| folio = filemap_get_folio(inode->vfs_inode.i_mapping, 0); | |
| ASSERT(!IS_ERR(folio)); | |
| btrfs_set_file_extent_compression(leaf, ei, 0); | |
| kaddr = kmap_local_folio(folio, 0); | |
| write_extent_buffer(leaf, kaddr, ptr, size); | |
| kunmap_local(kaddr); | |
| folio_put(folio); | |
| } | |
| btrfs_release_path(path); | |
| /* | |
| * We align size to sectorsize for inline extents just for simplicity | |
| * sake. | |
| */ | |
| ret = btrfs_inode_set_file_extent_range(inode, 0, | |
| ALIGN(size, root->fs_info->sectorsize)); | |
| if (ret) | |
| return ret; | |
| /* | |
| * We're an inline extent, so nobody can extend the file past i_size | |
| * without locking a page we already have locked. | |
| * | |
| * We must do any i_size and inode updates before we unlock the pages. | |
| * Otherwise we could end up racing with unlink. | |
| */ | |
| i_size = i_size_read(&inode->vfs_inode); | |
| if (update_i_size && size > i_size) { | |
| i_size_write(&inode->vfs_inode, size); | |
| i_size = size; | |
| } | |
| inode->disk_i_size = i_size; | |
| return 0; | |
| } | |
| static bool can_cow_file_range_inline(struct btrfs_inode *inode, | |
| u64 offset, u64 size, | |
| size_t compressed_size) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| u64 data_len = (compressed_size ?: size); | |
| /* Inline extents must start at offset 0. */ | |
| if (offset != 0) | |
| return false; | |
| /* | |
| * Even for bs > ps cases, cow_file_range_inline() can only accept a | |
| * single folio. | |
| * | |
| * This can be problematic and cause access beyond page boundary if a | |
| * page sized folio is passed into that function. | |
| * And encoded write is doing exactly that. | |
| * So here limits the inlined extent size to PAGE_SIZE. | |
| */ | |
| if (size > PAGE_SIZE || compressed_size > PAGE_SIZE) | |
| return false; | |
| /* Inline extents are limited to sectorsize. */ | |
| if (size > fs_info->sectorsize) | |
| return false; | |
| /* We do not allow a non-compressed extent to be as large as block size. */ | |
| if (data_len >= fs_info->sectorsize) | |
| return false; | |
| /* We cannot exceed the maximum inline data size. */ | |
| if (data_len > BTRFS_MAX_INLINE_DATA_SIZE(fs_info)) | |
| return false; | |
| /* We cannot exceed the user specified max_inline size. */ | |
| if (data_len > fs_info->max_inline) | |
| return false; | |
| /* Inline extents must be the entirety of the file. */ | |
| if (size < i_size_read(&inode->vfs_inode)) | |
| return false; | |
| /* Encrypted file cannot be inlined. */ | |
| if (IS_ENCRYPTED(&inode->vfs_inode)) | |
| return false; | |
| return true; | |
| } | |
| /* | |
| * conditionally insert an inline extent into the file. This | |
| * does the checks required to make sure the data is small enough | |
| * to fit as an inline extent. | |
| * | |
| * If being used directly, you must have already checked we're allowed to cow | |
| * the range by getting true from can_cow_file_range_inline(). | |
| * | |
| * Return 0 if the inlined extent is created successfully. | |
| * Return <0 for critical error, and should be considered as an writeback error. | |
| * Return >0 if can not create an inlined extent (mostly due to lack of meta space). | |
| */ | |
| static noinline int __cow_file_range_inline(struct btrfs_inode *inode, | |
| u64 size, size_t compressed_size, | |
| int compress_type, | |
| struct folio *compressed_folio, | |
| bool update_i_size) | |
| { | |
| struct btrfs_drop_extents_args drop_args = { 0 }; | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct btrfs_trans_handle *trans = NULL; | |
| u64 data_len = (compressed_size ?: size); | |
| int ret; | |
| struct btrfs_path *path; | |
| path = btrfs_alloc_path(); | |
| if (!path) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| trans = btrfs_join_transaction(root); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| trans = NULL; | |
| goto out; | |
| } | |
| trans->block_rsv = &inode->block_rsv; | |
| drop_args.path = path; | |
| drop_args.start = 0; | |
| drop_args.end = fs_info->sectorsize; | |
| drop_args.drop_cache = true; | |
| drop_args.replace_extent = true; | |
| drop_args.extent_item_size = btrfs_file_extent_calc_inline_size(data_len); | |
| ret = btrfs_drop_extents(trans, root, inode, &drop_args); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out; | |
| } | |
| ret = insert_inline_extent(trans, path, inode, drop_args.extent_inserted, | |
| size, compressed_size, compress_type, | |
| compressed_folio, update_i_size); | |
| if (unlikely(ret && ret != -ENOSPC)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out; | |
| } else if (ret == -ENOSPC) { | |
| ret = 1; | |
| goto out; | |
| } | |
| btrfs_update_inode_bytes(inode, size, drop_args.bytes_found); | |
| ret = btrfs_update_inode(trans, inode); | |
| if (unlikely(ret && ret != -ENOSPC)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out; | |
| } else if (ret == -ENOSPC) { | |
| ret = 1; | |
| goto out; | |
| } | |
| btrfs_set_inode_full_sync(inode); | |
| out: | |
| /* | |
| * Don't forget to free the reserved space, as for inlined extent | |
| * it won't count as data extent, free them directly here. | |
| * And at reserve time, it's always aligned to sector size, so | |
| * just free one sector here. | |
| * | |
| * If we fallback to non-inline (ret == 1) due to -ENOSPC, then we need | |
| * to keep the data reservation. | |
| */ | |
| if (ret <= 0) | |
| btrfs_qgroup_free_data(inode, NULL, 0, fs_info->sectorsize, NULL); | |
| btrfs_free_path(path); | |
| if (trans) | |
| btrfs_end_transaction(trans); | |
| return ret; | |
| } | |
| struct async_extent { | |
| u64 start; | |
| u64 ram_size; | |
| struct compressed_bio *cb; | |
| struct list_head list; | |
| }; | |
| struct async_chunk { | |
| struct btrfs_inode *inode; | |
| struct folio *locked_folio; | |
| u64 start; | |
| u64 end; | |
| blk_opf_t write_flags; | |
| struct list_head extents; | |
| struct cgroup_subsys_state *blkcg_css; | |
| struct btrfs_work work; | |
| struct async_cow *async_cow; | |
| }; | |
| struct async_cow { | |
| atomic_t num_chunks; | |
| struct async_chunk chunks[]; | |
| }; | |
| static int add_async_extent(struct async_chunk *cow, u64 start, u64 ram_size, | |
| struct compressed_bio *cb) | |
| { | |
| struct async_extent *async_extent; | |
| async_extent = kmalloc_obj(*async_extent, GFP_NOFS); | |
| if (!async_extent) | |
| return -ENOMEM; | |
| ASSERT(ram_size < U32_MAX); | |
| async_extent->start = start; | |
| async_extent->ram_size = ram_size; | |
| async_extent->cb = cb; | |
| list_add_tail(&async_extent->list, &cow->extents); | |
| return 0; | |
| } | |
| /* | |
| * Check if the inode needs to be submitted to compression, based on mount | |
| * options, defragmentation, properties or heuristics. | |
| */ | |
| static inline int inode_need_compress(struct btrfs_inode *inode, u64 start, | |
| u64 end, bool check_inline) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| if (unlikely(!btrfs_inode_can_compress(inode))) { | |
| DEBUG_WARN("BTRFS: unexpected compression for ino %llu", btrfs_ino(inode)); | |
| return 0; | |
| } | |
| /* | |
| * If the delalloc range is only one fs block and can not be inlined, | |
| * do not even bother try compression, as there will be no space saving | |
| * and will always fallback to regular write later. | |
| */ | |
| if (end + 1 - start <= fs_info->sectorsize && | |
| (!check_inline || (start > 0 || end + 1 < inode->disk_i_size))) | |
| return 0; | |
| /* Defrag ioctl takes precedence over mount options and properties. */ | |
| if (inode->defrag_compress == BTRFS_DEFRAG_DONT_COMPRESS) | |
| return 0; | |
| if (BTRFS_COMPRESS_NONE < inode->defrag_compress && | |
| inode->defrag_compress < BTRFS_NR_COMPRESS_TYPES) | |
| return 1; | |
| /* force compress */ | |
| if (btrfs_test_opt(fs_info, FORCE_COMPRESS)) | |
| return 1; | |
| /* bad compression ratios */ | |
| if (inode->flags & BTRFS_INODE_NOCOMPRESS) | |
| return 0; | |
| if (btrfs_test_opt(fs_info, COMPRESS) || | |
| inode->flags & BTRFS_INODE_COMPRESS || | |
| inode->prop_compress) | |
| return btrfs_compress_heuristic(inode, start, end); | |
| return 0; | |
| } | |
| static inline void inode_should_defrag(struct btrfs_inode *inode, | |
| u64 start, u64 end, u64 num_bytes, u32 small_write) | |
| { | |
| /* If this is a small write inside eof, kick off a defrag */ | |
| if (num_bytes < small_write && | |
| (start > 0 || end + 1 < inode->disk_i_size)) | |
| btrfs_add_inode_defrag(inode, small_write); | |
| } | |
| static int extent_range_clear_dirty_for_io(struct btrfs_inode *inode, u64 start, u64 end) | |
| { | |
| pgoff_t index = start >> PAGE_SHIFT; | |
| const pgoff_t end_index = end >> PAGE_SHIFT; | |
| struct folio *folio; | |
| int ret = 0; | |
| while (index <= end_index) { | |
| folio = filemap_get_folio(inode->vfs_inode.i_mapping, index); | |
| if (IS_ERR(folio)) { | |
| if (!ret) | |
| ret = PTR_ERR(folio); | |
| index++; | |
| continue; | |
| } | |
| /* | |
| * We are about to compress the folio, so it must not be mmap | |
| * writeable or we could corrupt the data as we attempt to | |
| * compress it. | |
| */ | |
| btrfs_check_folio_write_protected(folio); | |
| btrfs_folio_clamp_clear_dirty(inode->root->fs_info, folio, start, | |
| end + 1 - start); | |
| index = folio_next_index(folio); | |
| folio_put(folio); | |
| } | |
| return ret; | |
| } | |
| static struct folio *compressed_bio_last_folio(struct compressed_bio *cb) | |
| { | |
| struct bio *bio = &cb->bbio.bio; | |
| struct bio_vec *bvec; | |
| phys_addr_t paddr; | |
| /* | |
| * Make sure all folios have the same min_folio_size. | |
| * | |
| * Otherwise we cannot simply use offset_in_offset(folio, bi_size) to | |
| * calculate the end of the last folio. | |
| */ | |
| if (IS_ENABLED(CONFIG_BTRFS_ASSERT)) { | |
| struct btrfs_fs_info *fs_info = cb_to_fs_info(cb); | |
| const u32 min_folio_size = btrfs_min_folio_size(fs_info); | |
| struct folio_iter fi; | |
| bio_for_each_folio_all(fi, bio) | |
| ASSERT(folio_size(fi.folio) == min_folio_size); | |
| } | |
| /* The bio must not be empty. */ | |
| ASSERT(bio->bi_vcnt); | |
| bvec = &bio->bi_io_vec[bio->bi_vcnt - 1]; | |
| paddr = bvec_phys(bvec) + bvec->bv_len - 1; | |
| return page_folio(phys_to_page(paddr)); | |
| } | |
| static void round_up_last_block(struct compressed_bio *cb, u32 blocksize) | |
| { | |
| struct bio *bio = &cb->bbio.bio; | |
| struct folio *last_folio = compressed_bio_last_folio(cb); | |
| const u32 bio_size = bio->bi_iter.bi_size; | |
| const u32 foffset = offset_in_folio(last_folio, bio_size); | |
| const u32 padding_len = round_up(foffset, blocksize) - foffset; | |
| bool ret; | |
| if (IS_ALIGNED(bio_size, blocksize)) | |
| return; | |
| folio_zero_range(last_folio, foffset, padding_len); | |
| ret = bio_add_folio(bio, last_folio, padding_len, foffset); | |
| /* The remaining part should be merged thus never fail. */ | |
| ASSERT(ret); | |
| } | |
| /* | |
| * Work queue call back to started compression on a file and pages. | |
| * | |
| * This is done inside an ordered work queue, and the compression is spread | |
| * across many cpus. The actual IO submission is step two, and the ordered work | |
| * queue takes care of making sure that happens in the same order things were | |
| * put onto the queue by writepages and friends. | |
| * | |
| * If this code finds it can't get good compression, it puts an entry onto the | |
| * work queue to write the uncompressed bytes. This makes sure that both | |
| * compressed inodes and uncompressed inodes are written in the same order that | |
| * the flusher thread sent them down. | |
| */ | |
| static void compress_file_range(struct btrfs_work *work) | |
| { | |
| struct async_chunk *async_chunk = | |
| container_of(work, struct async_chunk, work); | |
| struct btrfs_inode *inode = async_chunk->inode; | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| struct compressed_bio *cb = NULL; | |
| const u32 blocksize = fs_info->sectorsize; | |
| u64 start = async_chunk->start; | |
| u64 end = async_chunk->end; | |
| u64 actual_end; | |
| u64 i_size; | |
| u32 cur_len; | |
| int ret = 0; | |
| unsigned long total_compressed = 0; | |
| unsigned long total_in = 0; | |
| int compress_type = fs_info->compress_type; | |
| int compress_level = fs_info->compress_level; | |
| if (btrfs_is_shutdown(fs_info)) | |
| goto cleanup_and_bail_uncompressed; | |
| inode_should_defrag(inode, start, end, end - start + 1, SZ_16K); | |
| ret = extent_range_clear_dirty_for_io(inode, start, end); | |
| /* | |
| * All the folios should have been locked thus no failure. | |
| * | |
| * And even if some folios are missing, btrfs_compress_bio() | |
| * would handle them correctly, so here just do an ASSERT() check for | |
| * early logic errors. | |
| */ | |
| ASSERT(ret == 0); | |
| /* | |
| * We need to save i_size before now because it could change in between | |
| * us evaluating the size and assigning it. This is because we lock and | |
| * unlock the page in truncate and fallocate, and then modify the i_size | |
| * later on. | |
| * | |
| * The barriers are to emulate READ_ONCE, remove that once i_size_read | |
| * does that for us. | |
| */ | |
| barrier(); | |
| i_size = i_size_read(&inode->vfs_inode); | |
| barrier(); | |
| actual_end = min_t(u64, i_size, end + 1); | |
| again: | |
| total_in = 0; | |
| cur_len = min(end + 1 - start, BTRFS_MAX_UNCOMPRESSED); | |
| ret = 0; | |
| cb = NULL; | |
| /* | |
| * we don't want to send crud past the end of i_size through | |
| * compression, that's just a waste of CPU time. So, if the | |
| * end of the file is before the start of our current | |
| * requested range of bytes, we bail out to the uncompressed | |
| * cleanup code that can deal with all of this. | |
| * | |
| * It isn't really the fastest way to fix things, but this is a | |
| * very uncommon corner. | |
| */ | |
| if (actual_end <= start) | |
| goto cleanup_and_bail_uncompressed; | |
| /* | |
| * We do compression for mount -o compress and when the inode has not | |
| * been flagged as NOCOMPRESS. This flag can change at any time if we | |
| * discover bad compression ratios. | |
| */ | |
| if (!inode_need_compress(inode, start, end, false)) | |
| goto cleanup_and_bail_uncompressed; | |
| if (0 < inode->defrag_compress && inode->defrag_compress < BTRFS_NR_COMPRESS_TYPES) { | |
| compress_type = inode->defrag_compress; | |
| compress_level = inode->defrag_compress_level; | |
| } else if (inode->prop_compress) { | |
| compress_type = inode->prop_compress; | |
| } | |
| /* Compression level is applied here. */ | |
| cb = btrfs_compress_bio(inode, start, cur_len, compress_type, | |
| compress_level, async_chunk->write_flags); | |
| if (IS_ERR(cb)) { | |
| cb = NULL; | |
| goto mark_incompressible; | |
| } | |
| total_compressed = cb->bbio.bio.bi_iter.bi_size; | |
| total_in = cur_len; | |
| /* | |
| * We aren't doing an inline extent. Round the compressed size up to a | |
| * block size boundary so the allocator does sane things. | |
| */ | |
| round_up_last_block(cb, blocksize); | |
| total_compressed = cb->bbio.bio.bi_iter.bi_size; | |
| ASSERT(IS_ALIGNED(total_compressed, blocksize)); | |
| /* | |
| * One last check to make sure the compression is really a win, compare | |
| * the page count read with the blocks on disk, compression must free at | |
| * least one sector. | |
| */ | |
| total_in = round_up(total_in, fs_info->sectorsize); | |
| if (total_compressed + blocksize > total_in) | |
| goto mark_incompressible; | |
| /* | |
| * The async work queues will take care of doing actual allocation on | |
| * disk for these compressed pages, and will submit the bios. | |
| */ | |
| ret = add_async_extent(async_chunk, start, total_in, cb); | |
| BUG_ON(ret); | |
| if (start + total_in < end) { | |
| start += total_in; | |
| cond_resched(); | |
| goto again; | |
| } | |
| return; | |
| mark_incompressible: | |
| if (!btrfs_test_opt(fs_info, FORCE_COMPRESS) && !inode->prop_compress) | |
| inode->flags |= BTRFS_INODE_NOCOMPRESS; | |
| cleanup_and_bail_uncompressed: | |
| ret = add_async_extent(async_chunk, start, end - start + 1, NULL); | |
| BUG_ON(ret); | |
| if (cb) | |
| cleanup_compressed_bio(cb); | |
| } | |
| static void submit_uncompressed_range(struct btrfs_inode *inode, | |
| struct async_extent *async_extent, | |
| struct folio *locked_folio) | |
| { | |
| u64 start = async_extent->start; | |
| u64 end = async_extent->start + async_extent->ram_size - 1; | |
| int ret; | |
| struct writeback_control wbc = { | |
| .sync_mode = WB_SYNC_ALL, | |
| .range_start = start, | |
| .range_end = end, | |
| .no_cgroup_owner = 1, | |
| }; | |
| wbc_attach_fdatawrite_inode(&wbc, &inode->vfs_inode); | |
| ret = run_delalloc_cow(inode, locked_folio, start, end, | |
| &wbc, false); | |
| wbc_detach_inode(&wbc); | |
| if (ret < 0) { | |
| if (locked_folio) | |
| btrfs_folio_end_lock(inode->root->fs_info, locked_folio, | |
| start, async_extent->ram_size); | |
| btrfs_err_rl(inode->root->fs_info, | |
| "%s failed, root=%llu inode=%llu start=%llu len=%llu: %pe", | |
| __func__, btrfs_root_id(inode->root), | |
| btrfs_ino(inode), start, async_extent->ram_size, | |
| ERR_PTR(ret)); | |
| } | |
| } | |
| static void submit_one_async_extent(struct async_chunk *async_chunk, | |
| struct async_extent *async_extent, | |
| u64 *alloc_hint) | |
| { | |
| struct btrfs_inode *inode = async_chunk->inode; | |
| struct extent_io_tree *io_tree = &inode->io_tree; | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct btrfs_ordered_extent *ordered; | |
| struct btrfs_file_extent file_extent; | |
| struct btrfs_key ins; | |
| struct folio *locked_folio = NULL; | |
| struct extent_state *cached = NULL; | |
| struct extent_map *em; | |
| int ret = 0; | |
| u32 compressed_size; | |
| u64 start = async_extent->start; | |
| u64 end = async_extent->start + async_extent->ram_size - 1; | |
| if (async_chunk->blkcg_css) | |
| kthread_associate_blkcg(async_chunk->blkcg_css); | |
| /* | |
| * If async_chunk->locked_folio is in the async_extent range, we need to | |
| * handle it. | |
| */ | |
| if (async_chunk->locked_folio) { | |
| u64 locked_folio_start = folio_pos(async_chunk->locked_folio); | |
| u64 locked_folio_end = locked_folio_start + | |
| folio_size(async_chunk->locked_folio) - 1; | |
| if (!(start >= locked_folio_end || end <= locked_folio_start)) | |
| locked_folio = async_chunk->locked_folio; | |
| } | |
| if (!async_extent->cb) { | |
| submit_uncompressed_range(inode, async_extent, locked_folio); | |
| goto done; | |
| } | |
| compressed_size = async_extent->cb->bbio.bio.bi_iter.bi_size; | |
| ret = btrfs_reserve_extent(root, async_extent->ram_size, | |
| compressed_size, compressed_size, | |
| 0, *alloc_hint, &ins, true, true); | |
| if (ret) { | |
| /* | |
| * We can't reserve contiguous space for the compressed size. | |
| * Unlikely, but it's possible that we could have enough | |
| * non-contiguous space for the uncompressed size instead. So | |
| * fall back to uncompressed. | |
| */ | |
| submit_uncompressed_range(inode, async_extent, locked_folio); | |
| cleanup_compressed_bio(async_extent->cb); | |
| async_extent->cb = NULL; | |
| goto done; | |
| } | |
| btrfs_lock_extent(io_tree, start, end, &cached); | |
| /* Here we're doing allocation and writeback of the compressed pages */ | |
| file_extent.disk_bytenr = ins.objectid; | |
| file_extent.disk_num_bytes = ins.offset; | |
| file_extent.ram_bytes = async_extent->ram_size; | |
| file_extent.num_bytes = async_extent->ram_size; | |
| file_extent.offset = 0; | |
| file_extent.compression = async_extent->cb->compress_type; | |
| async_extent->cb->bbio.bio.bi_iter.bi_sector = ins.objectid >> SECTOR_SHIFT; | |
| em = btrfs_create_io_em(inode, start, &file_extent, BTRFS_ORDERED_COMPRESSED); | |
| if (IS_ERR(em)) { | |
| ret = PTR_ERR(em); | |
| goto out_free_reserve; | |
| } | |
| btrfs_free_extent_map(em); | |
| ordered = btrfs_alloc_ordered_extent(inode, start, &file_extent, | |
| 1U << BTRFS_ORDERED_COMPRESSED); | |
| if (IS_ERR(ordered)) { | |
| btrfs_drop_extent_map_range(inode, start, end, false); | |
| ret = PTR_ERR(ordered); | |
| goto out_free_reserve; | |
| } | |
| async_extent->cb->bbio.ordered = ordered; | |
| btrfs_dec_block_group_reservations(fs_info, ins.objectid); | |
| /* Clear dirty, set writeback and unlock the pages. */ | |
| extent_clear_unlock_delalloc(inode, start, end, | |
| NULL, &cached, EXTENT_LOCKED | EXTENT_DELALLOC, | |
| PAGE_UNLOCK | PAGE_START_WRITEBACK); | |
| btrfs_submit_bbio(&async_extent->cb->bbio, 0); | |
| async_extent->cb = NULL; | |
| *alloc_hint = ins.objectid + ins.offset; | |
| done: | |
| if (async_chunk->blkcg_css) | |
| kthread_associate_blkcg(NULL); | |
| kfree(async_extent); | |
| return; | |
| out_free_reserve: | |
| btrfs_dec_block_group_reservations(fs_info, ins.objectid); | |
| btrfs_free_reserved_extent(fs_info, ins.objectid, ins.offset, true); | |
| mapping_set_error(inode->vfs_inode.i_mapping, -EIO); | |
| extent_clear_unlock_delalloc(inode, start, end, | |
| NULL, &cached, | |
| EXTENT_LOCKED | EXTENT_DELALLOC | | |
| EXTENT_DELALLOC_NEW | | |
| EXTENT_DEFRAG | EXTENT_CLEAR_META_RESV, | |
| PAGE_UNLOCK | PAGE_START_WRITEBACK | | |
| PAGE_END_WRITEBACK); | |
| if (async_extent->cb) | |
| cleanup_compressed_bio(async_extent->cb); | |
| if (async_chunk->blkcg_css) | |
| kthread_associate_blkcg(NULL); | |
| btrfs_debug(fs_info, | |
| "async extent submission failed root=%lld inode=%llu start=%llu len=%llu ret=%d", | |
| btrfs_root_id(root), btrfs_ino(inode), start, | |
| async_extent->ram_size, ret); | |
| kfree(async_extent); | |
| } | |
| u64 btrfs_get_extent_allocation_hint(struct btrfs_inode *inode, u64 start, | |
| u64 num_bytes) | |
| { | |
| struct extent_map_tree *em_tree = &inode->extent_tree; | |
| struct extent_map *em; | |
| u64 alloc_hint = 0; | |
| read_lock(&em_tree->lock); | |
| em = btrfs_search_extent_mapping(em_tree, start, num_bytes); | |
| if (em) { | |
| /* | |
| * if block start isn't an actual block number then find the | |
| * first block in this inode and use that as a hint. If that | |
| * block is also bogus then just don't worry about it. | |
| */ | |
| if (em->disk_bytenr >= EXTENT_MAP_LAST_BYTE) { | |
| btrfs_free_extent_map(em); | |
| em = btrfs_search_extent_mapping(em_tree, 0, 0); | |
| if (em && em->disk_bytenr < EXTENT_MAP_LAST_BYTE) | |
| alloc_hint = btrfs_extent_map_block_start(em); | |
| if (em) | |
| btrfs_free_extent_map(em); | |
| } else { | |
| alloc_hint = btrfs_extent_map_block_start(em); | |
| btrfs_free_extent_map(em); | |
| } | |
| } | |
| read_unlock(&em_tree->lock); | |
| return alloc_hint; | |
| } | |
| /* | |
| * Handle COW for one range. | |
| * | |
| * @ins: The key representing the allocated range. | |
| * @file_offset: The file offset of the COW range | |
| * @num_bytes: The expected length of the COW range | |
| * The actually allocated length can be smaller than it. | |
| * @min_alloc_size: The minimal extent size. | |
| * @alloc_hint: The hint for the extent allocator. | |
| * @ret_alloc_size: The COW range handles by this function. | |
| * | |
| * Return 0 if everything is fine and update @ret_alloc_size updated. The | |
| * range is still locked, and caller should unlock the range after everything | |
| * is done or for error handling. | |
| * | |
| * Return <0 for error and @is updated for where the extra cleanup should | |
| * happen. The range [file_offset, file_offset + ret_alloc_size) will be | |
| * cleaned up by this function. | |
| */ | |
| static int cow_one_range(struct btrfs_inode *inode, struct folio *locked_folio, | |
| struct btrfs_key *ins, struct extent_state **cached, | |
| u64 file_offset, u32 num_bytes, u32 min_alloc_size, | |
| u64 alloc_hint, u32 *ret_alloc_size) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct btrfs_ordered_extent *ordered; | |
| struct btrfs_file_extent file_extent; | |
| struct extent_map *em; | |
| u32 cur_len = 0; | |
| u64 cur_end; | |
| int ret; | |
| ret = btrfs_reserve_extent(root, num_bytes, num_bytes, min_alloc_size, | |
| 0, alloc_hint, ins, true, true); | |
| if (ret < 0) { | |
| *ret_alloc_size = cur_len; | |
| return ret; | |
| } | |
| cur_len = ins->offset; | |
| cur_end = file_offset + cur_len - 1; | |
| file_extent.disk_bytenr = ins->objectid; | |
| file_extent.disk_num_bytes = ins->offset; | |
| file_extent.num_bytes = ins->offset; | |
| file_extent.ram_bytes = ins->offset; | |
| file_extent.offset = 0; | |
| file_extent.compression = BTRFS_COMPRESS_NONE; | |
| /* | |
| * Locked range will be released either during error clean up (inside | |
| * this function or by the caller for previously successful ranges) or | |
| * after the whole range is finished. | |
| */ | |
| btrfs_lock_extent(&inode->io_tree, file_offset, cur_end, cached); | |
| em = btrfs_create_io_em(inode, file_offset, &file_extent, BTRFS_ORDERED_REGULAR); | |
| if (IS_ERR(em)) { | |
| ret = PTR_ERR(em); | |
| goto free_reserved; | |
| } | |
| btrfs_free_extent_map(em); | |
| ordered = btrfs_alloc_ordered_extent(inode, file_offset, &file_extent, | |
| 1U << BTRFS_ORDERED_REGULAR); | |
| if (IS_ERR(ordered)) { | |
| btrfs_drop_extent_map_range(inode, file_offset, cur_end, false); | |
| ret = PTR_ERR(ordered); | |
| goto free_reserved; | |
| } | |
| if (btrfs_is_data_reloc_root(root)) { | |
| ret = btrfs_reloc_clone_csums(ordered); | |
| /* | |
| * Only drop cache here, and process as normal. | |
| * | |
| * We must not allow extent_clear_unlock_delalloc() at | |
| * free_reserved label to free meta of this ordered extent, as | |
| * its meta should be freed by btrfs_finish_ordered_io(). | |
| * | |
| * So we must continue until @start is increased to | |
| * skip current ordered extent. | |
| */ | |
| if (ret) | |
| btrfs_drop_extent_map_range(inode, file_offset, | |
| cur_end, false); | |
| } | |
| btrfs_put_ordered_extent(ordered); | |
| btrfs_dec_block_group_reservations(fs_info, ins->objectid); | |
| /* | |
| * Error handling for btrfs_reloc_clone_csums(). | |
| * | |
| * Treat the range as finished, thus only clear EXTENT_LOCKED | EXTENT_DELALLOC. | |
| * The accounting will be done by ordered extents. | |
| */ | |
| if (unlikely(ret < 0)) { | |
| btrfs_cleanup_ordered_extents(inode, file_offset, cur_len); | |
| extent_clear_unlock_delalloc(inode, file_offset, cur_end, locked_folio, cached, | |
| EXTENT_LOCKED | EXTENT_DELALLOC, | |
| PAGE_UNLOCK | PAGE_START_WRITEBACK | | |
| PAGE_END_WRITEBACK); | |
| mapping_set_error(inode->vfs_inode.i_mapping, -EIO); | |
| } | |
| *ret_alloc_size = cur_len; | |
| return ret; | |
| free_reserved: | |
| /* | |
| * If we have reserved an extent for the current range and failed to | |
| * create the respective extent map or ordered extent, it means that | |
| * when we reserved the extent we decremented the extent's size from | |
| * the data space_info's bytes_may_use counter and | |
| * incremented the space_info's bytes_reserved counter by the same | |
| * amount. | |
| * | |
| * We must make sure extent_clear_unlock_delalloc() does not try | |
| * to decrement again the data space_info's bytes_may_use counter, which | |
| * will be handled by btrfs_free_reserved_extent(). | |
| * | |
| * Therefore we do not pass it the flag EXTENT_CLEAR_DATA_RESV, but only | |
| * EXTENT_CLEAR_META_RESV. | |
| */ | |
| extent_clear_unlock_delalloc(inode, file_offset, cur_end, locked_folio, cached, | |
| EXTENT_LOCKED | EXTENT_DELALLOC | | |
| EXTENT_DELALLOC_NEW | | |
| EXTENT_DEFRAG | EXTENT_CLEAR_META_RESV, | |
| PAGE_UNLOCK | PAGE_START_WRITEBACK | | |
| PAGE_END_WRITEBACK); | |
| btrfs_qgroup_free_data(inode, NULL, file_offset, cur_len, NULL); | |
| btrfs_dec_block_group_reservations(fs_info, ins->objectid); | |
| btrfs_free_reserved_extent(fs_info, ins->objectid, ins->offset, true); | |
| mapping_set_error(inode->vfs_inode.i_mapping, -EIO); | |
| *ret_alloc_size = cur_len; | |
| /* | |
| * We should not return -EAGAIN where it's a special return code for | |
| * zoned to catch btrfs_reserved_extent(). | |
| */ | |
| ASSERT(ret != -EAGAIN); | |
| return ret; | |
| } | |
| /* | |
| * when extent_io.c finds a delayed allocation range in the file, | |
| * the call backs end up in this code. The basic idea is to | |
| * allocate extents on disk for the range, and create ordered data structs | |
| * in ram to track those extents. | |
| * | |
| * locked_folio is the folio that writepage had locked already. We use | |
| * it to make sure we don't do extra locks or unlocks. | |
| * | |
| * When this function fails, it unlocks all folios except @locked_folio. | |
| * | |
| * When this function succeed and creates a normal extent, the folio locking | |
| * status depends on the passed in flags: | |
| * | |
| * - If COW_FILE_RANGE_KEEP_LOCKED flag is set, all folios are kept locked. | |
| * - Else all folios except for @locked_folio are unlocked. | |
| * | |
| * When a failure happens in the second or later iteration of the | |
| * while-loop, the ordered extents created in previous iterations are cleaned up. | |
| */ | |
| static noinline int cow_file_range(struct btrfs_inode *inode, | |
| struct folio *locked_folio, u64 start, | |
| u64 end, u64 *done_offset, | |
| unsigned long flags) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct extent_state *cached = NULL; | |
| u64 alloc_hint = 0; | |
| u64 orig_start = start; | |
| u64 num_bytes; | |
| u32 min_alloc_size; | |
| u32 blocksize = fs_info->sectorsize; | |
| u32 cur_alloc_size = 0; | |
| struct btrfs_key ins; | |
| unsigned clear_bits; | |
| unsigned long page_ops; | |
| int ret = 0; | |
| if (btrfs_is_shutdown(fs_info)) { | |
| ret = -EIO; | |
| goto out_unlock; | |
| } | |
| if (btrfs_is_free_space_inode(inode)) { | |
| ret = -EINVAL; | |
| goto out_unlock; | |
| } | |
| num_bytes = ALIGN(end - start + 1, blocksize); | |
| num_bytes = max(blocksize, num_bytes); | |
| ASSERT(num_bytes <= btrfs_super_total_bytes(fs_info->super_copy)); | |
| inode_should_defrag(inode, start, end, num_bytes, SZ_64K); | |
| alloc_hint = btrfs_get_extent_allocation_hint(inode, start, num_bytes); | |
| /* | |
| * We're not doing compressed IO, don't unlock the first page (which | |
| * the caller expects to stay locked), don't clear any dirty bits and | |
| * don't set any writeback bits. | |
| * | |
| * Do set the Ordered (Private2) bit so we know this page was properly | |
| * setup for writepage. | |
| */ | |
| page_ops = ((flags & COW_FILE_RANGE_KEEP_LOCKED) ? 0 : PAGE_UNLOCK); | |
| /* | |
| * Relocation relies on the relocated extents to have exactly the same | |
| * size as the original extents. Normally writeback for relocation data | |
| * extents follows a NOCOW path because relocation preallocates the | |
| * extents. However, due to an operation such as scrub turning a block | |
| * group to RO mode, it may fallback to COW mode, so we must make sure | |
| * an extent allocated during COW has exactly the requested size and can | |
| * not be split into smaller extents, otherwise relocation breaks and | |
| * fails during the stage where it updates the bytenr of file extent | |
| * items. | |
| */ | |
| if (btrfs_is_data_reloc_root(root)) | |
| min_alloc_size = num_bytes; | |
| else | |
| min_alloc_size = fs_info->sectorsize; | |
| while (num_bytes > 0) { | |
| ret = cow_one_range(inode, locked_folio, &ins, &cached, start, | |
| num_bytes, min_alloc_size, alloc_hint, &cur_alloc_size); | |
| if (ret == -EAGAIN) { | |
| /* | |
| * cow_one_range() only returns -EAGAIN for zoned | |
| * file systems (from btrfs_reserve_extent()), which | |
| * is an indication that there are | |
| * no active zones to allocate from at the moment. | |
| * | |
| * If this is the first loop iteration, wait for at | |
| * least one zone to finish before retrying the | |
| * allocation. Otherwise ask the caller to write out | |
| * the already allocated blocks before coming back to | |
| * us, or return -ENOSPC if it can't handle retries. | |
| */ | |
| ASSERT(btrfs_is_zoned(fs_info)); | |
| if (start == orig_start) { | |
| wait_on_bit_io(&inode->root->fs_info->flags, | |
| BTRFS_FS_NEED_ZONE_FINISH, | |
| TASK_UNINTERRUPTIBLE); | |
| continue; | |
| } | |
| if (done_offset) { | |
| /* | |
| * Move @end to the end of the processed range, | |
| * and exit the loop to unlock the processed extents. | |
| */ | |
| end = start - 1; | |
| ret = 0; | |
| break; | |
| } | |
| ret = -ENOSPC; | |
| } | |
| if (ret < 0) | |
| goto out_unlock; | |
| /* We should not allocate an extent larger than requested.*/ | |
| ASSERT(cur_alloc_size <= num_bytes); | |
| num_bytes -= cur_alloc_size; | |
| alloc_hint = ins.objectid + ins.offset; | |
| start += cur_alloc_size; | |
| cur_alloc_size = 0; | |
| } | |
| extent_clear_unlock_delalloc(inode, orig_start, end, locked_folio, &cached, | |
| EXTENT_LOCKED | EXTENT_DELALLOC, page_ops); | |
| if (done_offset) | |
| *done_offset = end; | |
| return ret; | |
| out_unlock: | |
| /* | |
| * Now, we have three regions to clean up: | |
| * | |
| * |-------(1)----|---(2)---|-------------(3)----------| | |
| * `- orig_start `- start `- start + cur_alloc_size `- end | |
| * | |
| * We process each region below. | |
| */ | |
| /* | |
| * For the range (1). We have already instantiated the ordered extents | |
| * for this region, thus we need to cleanup those ordered extents. | |
| * EXTENT_DELALLOC_NEW | EXTENT_DEFRAG | EXTENT_CLEAR_META_RESV | |
| * are also handled by the ordered extents cleanup. | |
| * | |
| * So here we only clear EXTENT_LOCKED and EXTENT_DELALLOC flag, and | |
| * finish the writeback of the involved folios, which will be never submitted. | |
| */ | |
| if (orig_start < start) { | |
| clear_bits = EXTENT_LOCKED | EXTENT_DELALLOC; | |
| page_ops = PAGE_UNLOCK | PAGE_START_WRITEBACK | PAGE_END_WRITEBACK; | |
| if (!locked_folio) | |
| mapping_set_error(inode->vfs_inode.i_mapping, ret); | |
| btrfs_cleanup_ordered_extents(inode, orig_start, start - orig_start); | |
| extent_clear_unlock_delalloc(inode, orig_start, start - 1, | |
| locked_folio, NULL, clear_bits, page_ops); | |
| } | |
| clear_bits = EXTENT_LOCKED | EXTENT_DELALLOC | EXTENT_DELALLOC_NEW | | |
| EXTENT_DEFRAG | EXTENT_CLEAR_META_RESV; | |
| page_ops = PAGE_UNLOCK | PAGE_START_WRITEBACK | PAGE_END_WRITEBACK; | |
| /* | |
| * For the range (2) the error handling is done by cow_one_range() itself. | |
| * Nothing needs to be done. | |
| * | |
| * For the range (3). We never touched the region. In addition to the | |
| * clear_bits above, we add EXTENT_CLEAR_DATA_RESV to release the data | |
| * space_info's bytes_may_use counter, reserved in | |
| * btrfs_check_data_free_space(). | |
| */ | |
| if (start + cur_alloc_size < end) { | |
| clear_bits |= EXTENT_CLEAR_DATA_RESV; | |
| extent_clear_unlock_delalloc(inode, start + cur_alloc_size, | |
| end, locked_folio, | |
| &cached, clear_bits, page_ops); | |
| btrfs_qgroup_free_data(inode, NULL, start + cur_alloc_size, | |
| end - start - cur_alloc_size + 1, NULL); | |
| } | |
| btrfs_err(fs_info, | |
| "%s failed, root=%llu inode=%llu start=%llu len=%llu cur_offset=%llu cur_alloc_size=%u: %pe", | |
| __func__, btrfs_root_id(inode->root), | |
| btrfs_ino(inode), orig_start, end + 1 - orig_start, | |
| start, cur_alloc_size, ERR_PTR(ret)); | |
| return ret; | |
| } | |
| /* | |
| * Phase two of compressed writeback. This is the ordered portion of the code, | |
| * which only gets called in the order the work was queued. We walk all the | |
| * async extents created by compress_file_range and send them down to the disk. | |
| * | |
| * If called with @do_free == true then it'll try to finish the work and free | |
| * the work struct eventually. | |
| */ | |
| static noinline void submit_compressed_extents(struct btrfs_work *work, bool do_free) | |
| { | |
| struct async_chunk *async_chunk = container_of(work, struct async_chunk, | |
| work); | |
| struct btrfs_fs_info *fs_info = btrfs_work_owner(work); | |
| struct async_extent *async_extent; | |
| unsigned long nr_pages; | |
| u64 alloc_hint = 0; | |
| if (do_free) { | |
| struct async_cow *async_cow; | |
| btrfs_add_delayed_iput(async_chunk->inode); | |
| if (async_chunk->blkcg_css) | |
| css_put(async_chunk->blkcg_css); | |
| async_cow = async_chunk->async_cow; | |
| if (atomic_dec_and_test(&async_cow->num_chunks)) | |
| kvfree(async_cow); | |
| return; | |
| } | |
| nr_pages = (async_chunk->end - async_chunk->start + PAGE_SIZE) >> | |
| PAGE_SHIFT; | |
| while (!list_empty(&async_chunk->extents)) { | |
| async_extent = list_first_entry(&async_chunk->extents, | |
| struct async_extent, list); | |
| list_del(&async_extent->list); | |
| submit_one_async_extent(async_chunk, async_extent, &alloc_hint); | |
| } | |
| /* atomic_sub_return implies a barrier */ | |
| if (atomic_sub_return(nr_pages, &fs_info->async_delalloc_pages) < | |
| 5 * SZ_1M) | |
| cond_wake_up_nomb(&fs_info->async_submit_wait); | |
| } | |
| static bool run_delalloc_compressed(struct btrfs_inode *inode, | |
| struct folio *locked_folio, u64 start, | |
| u64 end, struct writeback_control *wbc) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| struct cgroup_subsys_state *blkcg_css = wbc_blkcg_css(wbc); | |
| struct async_cow *ctx; | |
| struct async_chunk *async_chunk; | |
| unsigned long nr_pages; | |
| u64 num_chunks = DIV_ROUND_UP(end - start, BTRFS_COMPRESSION_CHUNK_SIZE); | |
| int i; | |
| unsigned nofs_flag; | |
| const blk_opf_t write_flags = wbc_to_write_flags(wbc); | |
| nofs_flag = memalloc_nofs_save(); | |
| ctx = kvmalloc_flex(*ctx, chunks, num_chunks); | |
| memalloc_nofs_restore(nofs_flag); | |
| if (!ctx) | |
| return false; | |
| set_bit(BTRFS_INODE_HAS_ASYNC_EXTENT, &inode->runtime_flags); | |
| async_chunk = ctx->chunks; | |
| atomic_set(&ctx->num_chunks, num_chunks); | |
| for (i = 0; i < num_chunks; i++) { | |
| u64 cur_end = min(end, start + BTRFS_COMPRESSION_CHUNK_SIZE - 1); | |
| /* | |
| * igrab is called higher up in the call chain, take only the | |
| * lightweight reference for the callback lifetime | |
| */ | |
| ihold(&inode->vfs_inode); | |
| async_chunk[i].async_cow = ctx; | |
| async_chunk[i].inode = inode; | |
| async_chunk[i].start = start; | |
| async_chunk[i].end = cur_end; | |
| async_chunk[i].write_flags = write_flags; | |
| INIT_LIST_HEAD(&async_chunk[i].extents); | |
| /* | |
| * The locked_folio comes all the way from writepage and its | |
| * the original folio we were actually given. As we spread | |
| * this large delalloc region across multiple async_chunk | |
| * structs, only the first struct needs a pointer to | |
| * locked_folio. | |
| * | |
| * This way we don't need racey decisions about who is supposed | |
| * to unlock it. | |
| */ | |
| if (locked_folio) { | |
| /* | |
| * Depending on the compressibility, the pages might or | |
| * might not go through async. We want all of them to | |
| * be accounted against wbc once. Let's do it here | |
| * before the paths diverge. wbc accounting is used | |
| * only for foreign writeback detection and doesn't | |
| * need full accuracy. Just account the whole thing | |
| * against the first page. | |
| */ | |
| wbc_account_cgroup_owner(wbc, locked_folio, | |
| cur_end - start); | |
| async_chunk[i].locked_folio = locked_folio; | |
| locked_folio = NULL; | |
| } else { | |
| async_chunk[i].locked_folio = NULL; | |
| } | |
| if (blkcg_css != blkcg_root_css) { | |
| css_get(blkcg_css); | |
| async_chunk[i].blkcg_css = blkcg_css; | |
| async_chunk[i].write_flags |= REQ_BTRFS_CGROUP_PUNT; | |
| } else { | |
| async_chunk[i].blkcg_css = NULL; | |
| } | |
| btrfs_init_work(&async_chunk[i].work, compress_file_range, | |
| submit_compressed_extents); | |
| nr_pages = DIV_ROUND_UP(cur_end - start, PAGE_SIZE); | |
| atomic_add(nr_pages, &fs_info->async_delalloc_pages); | |
| btrfs_queue_work(fs_info->delalloc_workers, &async_chunk[i].work); | |
| start = cur_end + 1; | |
| } | |
| return true; | |
| } | |
| /* | |
| * Run the delalloc range from start to end, and write back any dirty pages | |
| * covered by the range. | |
| */ | |
| static noinline int run_delalloc_cow(struct btrfs_inode *inode, | |
| struct folio *locked_folio, u64 start, | |
| u64 end, struct writeback_control *wbc, | |
| bool pages_dirty) | |
| { | |
| u64 done_offset = end; | |
| int ret; | |
| while (start <= end) { | |
| ret = cow_file_range(inode, locked_folio, start, end, | |
| &done_offset, COW_FILE_RANGE_KEEP_LOCKED); | |
| if (ret) | |
| return ret; | |
| extent_write_locked_range(&inode->vfs_inode, locked_folio, | |
| start, done_offset, wbc, pages_dirty); | |
| start = done_offset + 1; | |
| } | |
| return 1; | |
| } | |
| static int fallback_to_cow(struct btrfs_inode *inode, | |
| struct folio *locked_folio, const u64 start, | |
| const u64 end) | |
| { | |
| const bool is_space_ino = btrfs_is_free_space_inode(inode); | |
| const bool is_reloc_ino = btrfs_is_data_reloc_root(inode->root); | |
| const u64 range_bytes = end + 1 - start; | |
| struct extent_io_tree *io_tree = &inode->io_tree; | |
| struct extent_state *cached_state = NULL; | |
| u64 range_start = start; | |
| u64 count; | |
| int ret; | |
| /* | |
| * If EXTENT_NORESERVE is set it means that when the buffered write was | |
| * made we had not enough available data space and therefore we did not | |
| * reserve data space for it, since we though we could do NOCOW for the | |
| * respective file range (either there is prealloc extent or the inode | |
| * has the NOCOW bit set). | |
| * | |
| * However when we need to fallback to COW mode (because for example the | |
| * block group for the corresponding extent was turned to RO mode by a | |
| * scrub or relocation) we need to do the following: | |
| * | |
| * 1) We increment the bytes_may_use counter of the data space info. | |
| * If COW succeeds, it allocates a new data extent and after doing | |
| * that it decrements the space info's bytes_may_use counter and | |
| * increments its bytes_reserved counter by the same amount (we do | |
| * this at btrfs_add_reserved_bytes()). So we need to increment the | |
| * bytes_may_use counter to compensate (when space is reserved at | |
| * buffered write time, the bytes_may_use counter is incremented); | |
| * | |
| * 2) We clear the EXTENT_NORESERVE bit from the range. We do this so | |
| * that if the COW path fails for any reason, it decrements (through | |
| * extent_clear_unlock_delalloc()) the bytes_may_use counter of the | |
| * data space info, which we incremented in the step above. | |
| * | |
| * If we need to fallback to cow and the inode corresponds to a free | |
| * space cache inode or an inode of the data relocation tree, we must | |
| * also increment bytes_may_use of the data space_info for the same | |
| * reason. Space caches and relocated data extents always get a prealloc | |
| * extent for them, however scrub or balance may have set the block | |
| * group that contains that extent to RO mode and therefore force COW | |
| * when starting writeback. | |
| */ | |
| btrfs_lock_extent(io_tree, start, end, &cached_state); | |
| count = btrfs_count_range_bits(io_tree, &range_start, end, range_bytes, | |
| EXTENT_NORESERVE, false, NULL); | |
| if (count > 0 || is_space_ino || is_reloc_ino) { | |
| u64 bytes = count; | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| struct btrfs_space_info *sinfo = fs_info->data_sinfo; | |
| if (is_space_ino || is_reloc_ino) | |
| bytes = range_bytes; | |
| spin_lock(&sinfo->lock); | |
| btrfs_space_info_update_bytes_may_use(sinfo, bytes); | |
| spin_unlock(&sinfo->lock); | |
| if (count > 0) | |
| btrfs_clear_extent_bit(io_tree, start, end, EXTENT_NORESERVE, | |
| &cached_state); | |
| } | |
| btrfs_unlock_extent(io_tree, start, end, &cached_state); | |
| /* | |
| * Don't try to create inline extents, as a mix of inline extent that | |
| * is written out and unlocked directly and a normal NOCOW extent | |
| * doesn't work. | |
| * | |
| * And here we do not unlock the folio after a successful run. | |
| * The folios will be unlocked after everything is finished, or by error handling. | |
| * | |
| * This is to ensure error handling won't need to clear dirty/ordered flags without | |
| * a locked folio, which can race with writeback. | |
| */ | |
| ret = cow_file_range(inode, locked_folio, start, end, NULL, | |
| COW_FILE_RANGE_KEEP_LOCKED); | |
| ASSERT(ret != 1); | |
| return ret; | |
| } | |
| struct can_nocow_file_extent_args { | |
| /* Input fields. */ | |
| /* Start file offset of the range we want to NOCOW. */ | |
| u64 start; | |
| /* End file offset (inclusive) of the range we want to NOCOW. */ | |
| u64 end; | |
| bool writeback_path; | |
| /* | |
| * Free the path passed to can_nocow_file_extent() once it's not needed | |
| * anymore. | |
| */ | |
| bool free_path; | |
| /* | |
| * Output fields. Only set when can_nocow_file_extent() returns 1. | |
| * The expected file extent for the NOCOW write. | |
| */ | |
| struct btrfs_file_extent file_extent; | |
| }; | |
| /* | |
| * Check if we can NOCOW the file extent that the path points to. | |
| * This function may return with the path released, so the caller should check | |
| * if path->nodes[0] is NULL or not if it needs to use the path afterwards. | |
| * | |
| * Returns: < 0 on error | |
| * 0 if we can not NOCOW | |
| * 1 if we can NOCOW | |
| */ | |
| static int can_nocow_file_extent(struct btrfs_path *path, | |
| struct btrfs_key *key, | |
| struct btrfs_inode *inode, | |
| struct can_nocow_file_extent_args *args) | |
| { | |
| const bool is_freespace_inode = btrfs_is_free_space_inode(inode); | |
| struct extent_buffer *leaf = path->nodes[0]; | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_file_extent_item *fi; | |
| struct btrfs_root *csum_root; | |
| u64 io_start; | |
| u64 extent_end; | |
| u8 extent_type; | |
| int can_nocow = 0; | |
| int ret = 0; | |
| bool nowait = path->nowait; | |
| /* If there are pending snapshots for this root, we must do COW. */ | |
| if (args->writeback_path && !is_freespace_inode && | |
| atomic_read(&root->snapshot_force_cow)) | |
| goto out; | |
| fi = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_file_extent_item); | |
| extent_type = btrfs_file_extent_type(leaf, fi); | |
| if (extent_type == BTRFS_FILE_EXTENT_INLINE) | |
| goto out; | |
| if (!(inode->flags & BTRFS_INODE_NODATACOW) && | |
| extent_type == BTRFS_FILE_EXTENT_REG) | |
| goto out; | |
| /* | |
| * If the extent was created before the generation where the last snapshot | |
| * for its subvolume was created, then this implies the extent is shared, | |
| * hence we must COW. | |
| */ | |
| if (btrfs_file_extent_generation(leaf, fi) <= | |
| btrfs_root_last_snapshot(&root->root_item)) | |
| goto out; | |
| /* An explicit hole, must COW. */ | |
| if (btrfs_file_extent_disk_bytenr(leaf, fi) == 0) | |
| goto out; | |
| /* Compressed/encrypted/encoded extents must be COWed. */ | |
| if (btrfs_file_extent_compression(leaf, fi) || | |
| btrfs_file_extent_encryption(leaf, fi) || | |
| btrfs_file_extent_other_encoding(leaf, fi)) | |
| goto out; | |
| extent_end = btrfs_file_extent_end(path); | |
| args->file_extent.disk_bytenr = btrfs_file_extent_disk_bytenr(leaf, fi); | |
| args->file_extent.disk_num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi); | |
| args->file_extent.ram_bytes = btrfs_file_extent_ram_bytes(leaf, fi); | |
| args->file_extent.offset = btrfs_file_extent_offset(leaf, fi); | |
| args->file_extent.compression = btrfs_file_extent_compression(leaf, fi); | |
| /* | |
| * The following checks can be expensive, as they need to take other | |
| * locks and do btree or rbtree searches, so release the path to avoid | |
| * blocking other tasks for too long. | |
| */ | |
| btrfs_release_path(path); | |
| ret = btrfs_cross_ref_exist(inode, key->offset - args->file_extent.offset, | |
| args->file_extent.disk_bytenr, path); | |
| WARN_ON_ONCE(ret > 0 && is_freespace_inode); | |
| if (ret != 0) | |
| goto out; | |
| if (args->free_path) { | |
| /* | |
| * We don't need the path anymore, plus through the | |
| * btrfs_lookup_csums_list() call below we will end up allocating | |
| * another path. So free the path to avoid unnecessary extra | |
| * memory usage. | |
| */ | |
| btrfs_free_path(path); | |
| path = NULL; | |
| } | |
| args->file_extent.num_bytes = min(args->end + 1, extent_end) - args->start; | |
| args->file_extent.offset += args->start - key->offset; | |
| io_start = args->file_extent.disk_bytenr + args->file_extent.offset; | |
| /* | |
| * Force COW if csums exist in the range. This ensures that csums for a | |
| * given extent are either valid or do not exist. | |
| */ | |
| csum_root = btrfs_csum_root(root->fs_info, io_start); | |
| if (unlikely(!csum_root)) { | |
| btrfs_err(root->fs_info, | |
| "missing csum root for extent at bytenr %llu", io_start); | |
| ret = -EUCLEAN; | |
| goto out; | |
| } | |
| ret = btrfs_lookup_csums_list(csum_root, io_start, | |
| io_start + args->file_extent.num_bytes - 1, | |
| NULL, nowait); | |
| WARN_ON_ONCE(ret > 0 && is_freespace_inode); | |
| if (ret != 0) | |
| goto out; | |
| can_nocow = 1; | |
| out: | |
| if (args->free_path && path) | |
| btrfs_free_path(path); | |
| return ret < 0 ? ret : can_nocow; | |
| } | |
| static int nocow_one_range(struct btrfs_inode *inode, struct folio *locked_folio, | |
| struct extent_state **cached, | |
| struct can_nocow_file_extent_args *nocow_args, | |
| u64 file_pos, bool is_prealloc) | |
| { | |
| struct btrfs_ordered_extent *ordered; | |
| const u64 len = nocow_args->file_extent.num_bytes; | |
| const u64 end = file_pos + len - 1; | |
| int ret = 0; | |
| btrfs_lock_extent(&inode->io_tree, file_pos, end, cached); | |
| if (is_prealloc) { | |
| struct extent_map *em; | |
| em = btrfs_create_io_em(inode, file_pos, &nocow_args->file_extent, | |
| BTRFS_ORDERED_PREALLOC); | |
| if (IS_ERR(em)) { | |
| ret = PTR_ERR(em); | |
| goto error; | |
| } | |
| btrfs_free_extent_map(em); | |
| } | |
| ordered = btrfs_alloc_ordered_extent(inode, file_pos, &nocow_args->file_extent, | |
| is_prealloc | |
| ? (1U << BTRFS_ORDERED_PREALLOC) | |
| : (1U << BTRFS_ORDERED_NOCOW)); | |
| if (IS_ERR(ordered)) { | |
| if (is_prealloc) | |
| btrfs_drop_extent_map_range(inode, file_pos, end, false); | |
| ret = PTR_ERR(ordered); | |
| goto error; | |
| } | |
| if (btrfs_is_data_reloc_root(inode->root)) | |
| /* | |
| * Errors are handled later, as we must prevent | |
| * extent_clear_unlock_delalloc() in error handler from freeing | |
| * metadata of the created ordered extent. | |
| */ | |
| ret = btrfs_reloc_clone_csums(ordered); | |
| btrfs_put_ordered_extent(ordered); | |
| if (ret < 0) | |
| goto error; | |
| extent_clear_unlock_delalloc(inode, file_pos, end, locked_folio, cached, | |
| EXTENT_LOCKED | EXTENT_DELALLOC | | |
| EXTENT_CLEAR_DATA_RESV, 0); | |
| return ret; | |
| error: | |
| btrfs_cleanup_ordered_extents(inode, file_pos, len); | |
| extent_clear_unlock_delalloc(inode, file_pos, end, locked_folio, cached, | |
| EXTENT_LOCKED | EXTENT_DELALLOC | | |
| EXTENT_CLEAR_DATA_RESV, | |
| PAGE_UNLOCK | PAGE_START_WRITEBACK | | |
| PAGE_END_WRITEBACK); | |
| btrfs_err(inode->root->fs_info, | |
| "%s failed, root=%lld inode=%llu start=%llu len=%llu: %pe", | |
| __func__, btrfs_root_id(inode->root), btrfs_ino(inode), | |
| file_pos, len, ERR_PTR(ret)); | |
| return ret; | |
| } | |
| /* | |
| * When nocow writeback calls back. This checks for snapshots or COW copies | |
| * of the extents that exist in the file, and COWs the file as required. | |
| * | |
| * If no cow copies or snapshots exist, we write directly to the existing | |
| * blocks on disk | |
| */ | |
| static noinline int run_delalloc_nocow(struct btrfs_inode *inode, | |
| struct folio *locked_folio, | |
| const u64 start, const u64 end) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_path *path = NULL; | |
| u64 cow_start = (u64)-1; | |
| /* | |
| * If not 0, represents the inclusive end of the last fallback_to_cow() | |
| * range. Only for error handling. | |
| * | |
| * The same for nocow_end, it's to avoid double cleaning up the range | |
| * already cleaned by nocow_one_range(). | |
| */ | |
| u64 cow_end = 0; | |
| u64 nocow_end = 0; | |
| u64 cur_offset = start; | |
| int ret; | |
| bool check_prev = true; | |
| u64 ino = btrfs_ino(inode); | |
| struct can_nocow_file_extent_args nocow_args = { 0 }; | |
| /* The range that has ordered extent(s). */ | |
| u64 oe_cleanup_start; | |
| u64 oe_cleanup_len = 0; | |
| /* The range that is untouched. */ | |
| u64 untouched_start; | |
| u64 untouched_len = 0; | |
| /* | |
| * Normally on a zoned device we're only doing COW writes, but in case | |
| * of relocation on a zoned filesystem serializes I/O so that we're only | |
| * writing sequentially and can end up here as well. | |
| */ | |
| ASSERT(!btrfs_is_zoned(fs_info) || btrfs_is_data_reloc_root(root)); | |
| if (btrfs_is_shutdown(fs_info)) { | |
| ret = -EIO; | |
| goto error; | |
| } | |
| path = btrfs_alloc_path(); | |
| if (!path) { | |
| ret = -ENOMEM; | |
| goto error; | |
| } | |
| nocow_args.end = end; | |
| nocow_args.writeback_path = true; | |
| while (cur_offset <= end) { | |
| struct btrfs_block_group *nocow_bg = NULL; | |
| struct btrfs_key found_key; | |
| struct btrfs_file_extent_item *fi; | |
| struct extent_buffer *leaf; | |
| struct extent_state *cached_state = NULL; | |
| u64 extent_end; | |
| int extent_type; | |
| ret = btrfs_lookup_file_extent(NULL, root, path, ino, | |
| cur_offset, 0); | |
| if (ret < 0) | |
| goto error; | |
| /* | |
| * If there is no extent for our range when doing the initial | |
| * search, then go back to the previous slot as it will be the | |
| * one containing the search offset | |
| */ | |
| if (ret > 0 && path->slots[0] > 0 && check_prev) { | |
| leaf = path->nodes[0]; | |
| btrfs_item_key_to_cpu(leaf, &found_key, | |
| path->slots[0] - 1); | |
| if (found_key.objectid == ino && | |
| found_key.type == BTRFS_EXTENT_DATA_KEY) | |
| path->slots[0]--; | |
| } | |
| check_prev = false; | |
| next_slot: | |
| /* Go to next leaf if we have exhausted the current one */ | |
| leaf = path->nodes[0]; | |
| if (path->slots[0] >= btrfs_header_nritems(leaf)) { | |
| ret = btrfs_next_leaf(root, path); | |
| if (ret < 0) | |
| goto error; | |
| if (ret > 0) | |
| break; | |
| leaf = path->nodes[0]; | |
| } | |
| btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]); | |
| /* Didn't find anything for our INO */ | |
| if (found_key.objectid > ino) | |
| break; | |
| /* | |
| * Keep searching until we find an EXTENT_ITEM or there are no | |
| * more extents for this inode | |
| */ | |
| if (WARN_ON_ONCE(found_key.objectid < ino) || | |
| found_key.type < BTRFS_EXTENT_DATA_KEY) { | |
| path->slots[0]++; | |
| goto next_slot; | |
| } | |
| /* Found key is not EXTENT_DATA_KEY or starts after req range */ | |
| if (found_key.type > BTRFS_EXTENT_DATA_KEY || | |
| found_key.offset > end) | |
| break; | |
| /* | |
| * If the found extent starts after requested offset, then | |
| * adjust cur_offset to be right before this extent begins. | |
| */ | |
| if (found_key.offset > cur_offset) { | |
| if (cow_start == (u64)-1) | |
| cow_start = cur_offset; | |
| cur_offset = found_key.offset; | |
| goto next_slot; | |
| } | |
| /* | |
| * Found extent which begins before our range and potentially | |
| * intersect it | |
| */ | |
| fi = btrfs_item_ptr(leaf, path->slots[0], | |
| struct btrfs_file_extent_item); | |
| extent_type = btrfs_file_extent_type(leaf, fi); | |
| /* If this is triggered then we have a memory corruption. */ | |
| ASSERT(extent_type < BTRFS_NR_FILE_EXTENT_TYPES); | |
| if (WARN_ON(extent_type >= BTRFS_NR_FILE_EXTENT_TYPES)) { | |
| ret = -EUCLEAN; | |
| goto error; | |
| } | |
| extent_end = btrfs_file_extent_end(path); | |
| /* | |
| * If the extent we got ends before our current offset, skip to | |
| * the next extent. | |
| */ | |
| if (extent_end <= cur_offset) { | |
| path->slots[0]++; | |
| goto next_slot; | |
| } | |
| nocow_args.start = cur_offset; | |
| ret = can_nocow_file_extent(path, &found_key, inode, &nocow_args); | |
| if (ret < 0) | |
| goto error; | |
| if (ret == 0) | |
| goto must_cow; | |
| ret = 0; | |
| nocow_bg = btrfs_inc_nocow_writers(fs_info, | |
| nocow_args.file_extent.disk_bytenr + | |
| nocow_args.file_extent.offset); | |
| if (!nocow_bg) { | |
| must_cow: | |
| /* | |
| * If we can't perform NOCOW writeback for the range, | |
| * then record the beginning of the range that needs to | |
| * be COWed. It will be written out before the next | |
| * NOCOW range if we find one, or when exiting this | |
| * loop. | |
| */ | |
| if (cow_start == (u64)-1) | |
| cow_start = cur_offset; | |
| cur_offset = extent_end; | |
| if (cur_offset > end) | |
| break; | |
| if (!path->nodes[0]) | |
| continue; | |
| path->slots[0]++; | |
| goto next_slot; | |
| } | |
| /* | |
| * COW range from cow_start to found_key.offset - 1. As the key | |
| * will contain the beginning of the first extent that can be | |
| * NOCOW, following one which needs to be COW'ed | |
| */ | |
| if (cow_start != (u64)-1) { | |
| ret = fallback_to_cow(inode, locked_folio, cow_start, | |
| found_key.offset - 1); | |
| if (ret) { | |
| cow_end = found_key.offset - 1; | |
| btrfs_dec_nocow_writers(nocow_bg); | |
| goto error; | |
| } | |
| cow_start = (u64)-1; | |
| } | |
| ret = nocow_one_range(inode, locked_folio, &cached_state, | |
| &nocow_args, cur_offset, | |
| extent_type == BTRFS_FILE_EXTENT_PREALLOC); | |
| btrfs_dec_nocow_writers(nocow_bg); | |
| if (ret < 0) { | |
| nocow_end = cur_offset + nocow_args.file_extent.num_bytes - 1; | |
| goto error; | |
| } | |
| cur_offset = extent_end; | |
| } | |
| btrfs_release_path(path); | |
| if (cur_offset <= end && cow_start == (u64)-1) | |
| cow_start = cur_offset; | |
| if (cow_start != (u64)-1) { | |
| ret = fallback_to_cow(inode, locked_folio, cow_start, end); | |
| if (ret) { | |
| cow_end = end; | |
| goto error; | |
| } | |
| cow_start = (u64)-1; | |
| } | |
| /* | |
| * Everything is finished without an error, can unlock the folios now. | |
| * | |
| * No need to touch the io tree range nor set folio ordered flag, as | |
| * fallback_to_cow() and nocow_one_range() have already handled them. | |
| */ | |
| extent_clear_unlock_delalloc(inode, start, end, locked_folio, NULL, 0, PAGE_UNLOCK); | |
| btrfs_free_path(path); | |
| return 0; | |
| error: | |
| if (cow_start == (u64)-1) { | |
| /* | |
| * case a) | |
| * start cur_offset end | |
| * | OE cleanup | Untouched | | |
| * | |
| * We finished a fallback_to_cow() or nocow_one_range() call, | |
| * but failed to check the next range. | |
| * | |
| * or | |
| * start cur_offset nocow_end end | |
| * | OE cleanup | Skip | Untouched | | |
| * | |
| * nocow_one_range() failed, the range [cur_offset, nocow_end] is | |
| * already cleaned up. | |
| */ | |
| oe_cleanup_start = start; | |
| oe_cleanup_len = cur_offset - start; | |
| if (nocow_end) | |
| untouched_start = nocow_end + 1; | |
| else | |
| untouched_start = cur_offset; | |
| untouched_len = end + 1 - untouched_start; | |
| } else if (cow_start != (u64)-1 && cow_end == 0) { | |
| /* | |
| * case b) | |
| * start cow_start cur_offset end | |
| * | OE cleanup | Untouched | | |
| * | |
| * We got a range that needs COW, but before we hit the next NOCOW range, | |
| * thus [cow_start, cur_offset) doesn't yet have any OE. | |
| */ | |
| oe_cleanup_start = start; | |
| oe_cleanup_len = cow_start - start; | |
| untouched_start = cow_start; | |
| untouched_len = end + 1 - untouched_start; | |
| } else { | |
| /* | |
| * case c) | |
| * start cow_start cow_end end | |
| * | OE cleanup | Skip | Untouched | | |
| * | |
| * fallback_to_cow() failed, and fallback_to_cow() will do the | |
| * cleanup for its range, we shouldn't touch the range | |
| * [cow_start, cow_end]. | |
| */ | |
| ASSERT(cow_start != (u64)-1 && cow_end != 0); | |
| oe_cleanup_start = start; | |
| oe_cleanup_len = cow_start - start; | |
| untouched_start = cow_end + 1; | |
| untouched_len = end + 1 - untouched_start; | |
| } | |
| if (oe_cleanup_len) { | |
| const u64 oe_cleanup_end = oe_cleanup_start + oe_cleanup_len - 1; | |
| btrfs_cleanup_ordered_extents(inode, oe_cleanup_start, oe_cleanup_len); | |
| extent_clear_unlock_delalloc(inode, oe_cleanup_start, oe_cleanup_end, | |
| locked_folio, NULL, | |
| EXTENT_LOCKED | EXTENT_DELALLOC, | |
| PAGE_UNLOCK | PAGE_START_WRITEBACK | | |
| PAGE_END_WRITEBACK); | |
| } | |
| if (untouched_len) { | |
| struct extent_state *cached = NULL; | |
| const u64 untouched_end = untouched_start + untouched_len - 1; | |
| /* | |
| * We need to lock the extent here because we're clearing DELALLOC and | |
| * we're not locked at this point. | |
| */ | |
| btrfs_lock_extent(&inode->io_tree, untouched_start, untouched_end, &cached); | |
| extent_clear_unlock_delalloc(inode, untouched_start, untouched_end, | |
| locked_folio, &cached, | |
| EXTENT_LOCKED | EXTENT_DELALLOC | | |
| EXTENT_DEFRAG | | |
| EXTENT_DO_ACCOUNTING, PAGE_UNLOCK | | |
| PAGE_START_WRITEBACK | | |
| PAGE_END_WRITEBACK); | |
| btrfs_qgroup_free_data(inode, NULL, untouched_start, untouched_len, NULL); | |
| } | |
| btrfs_free_path(path); | |
| btrfs_err(fs_info, | |
| "%s failed, root=%llu inode=%llu start=%llu len=%llu cur_offset=%llu oe_cleanup=%llu oe_cleanup_len=%llu untouched_start=%llu untouched_len=%llu: %pe", | |
| __func__, btrfs_root_id(inode->root), btrfs_ino(inode), | |
| start, end + 1 - start, cur_offset, oe_cleanup_start, oe_cleanup_len, | |
| untouched_start, untouched_len, ERR_PTR(ret)); | |
| return ret; | |
| } | |
| static bool should_nocow(struct btrfs_inode *inode, u64 start, u64 end) | |
| { | |
| if (inode->flags & (BTRFS_INODE_NODATACOW | BTRFS_INODE_PREALLOC)) { | |
| if (data_race(inode->defrag_bytes) && | |
| btrfs_test_range_bit_exists(&inode->io_tree, start, end, EXTENT_DEFRAG)) | |
| return false; | |
| return true; | |
| } | |
| return false; | |
| } | |
| /* | |
| * Return 0 if an inlined extent is created successfully. | |
| * Return <0 if critical error happened. | |
| * Return >0 if an inline extent can not be created. | |
| */ | |
| static int run_delalloc_inline(struct btrfs_inode *inode, struct folio *locked_folio) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| struct compressed_bio *cb = NULL; | |
| struct extent_state *cached = NULL; | |
| const u64 i_size = i_size_read(&inode->vfs_inode); | |
| const u32 blocksize = fs_info->sectorsize; | |
| int compress_type = fs_info->compress_type; | |
| int compress_level = fs_info->compress_level; | |
| u32 compressed_size = 0; | |
| int ret; | |
| ASSERT(folio_pos(locked_folio) == 0); | |
| /* | |
| * If an mmap writer could modify the folio while we copy it into an | |
| * inline extent we might see only part of their modification then | |
| * wrongly mark it clean again after copying, losing that write. So the | |
| * folio must be write protected here. | |
| */ | |
| btrfs_check_folio_write_protected(locked_folio); | |
| if (btrfs_inode_can_compress(inode) && | |
| inode_need_compress(inode, 0, blocksize, true)) { | |
| if (inode->defrag_compress > 0 && | |
| inode->defrag_compress < BTRFS_NR_COMPRESS_TYPES) { | |
| compress_type = inode->defrag_compress; | |
| compress_level = inode->defrag_compress_level; | |
| } else if (inode->prop_compress) { | |
| compress_type = inode->prop_compress; | |
| } | |
| /* | |
| * We need to pass blocksize and not i_size, otherwise we can't | |
| * create compressed inline extents for data smaller than sector | |
| * size with lzo. | |
| */ | |
| cb = btrfs_compress_bio(inode, 0, blocksize, compress_type, compress_level, 0); | |
| if (IS_ERR(cb)) { | |
| cb = NULL; | |
| /* Just fall back to non-compressed case. */ | |
| } else { | |
| compressed_size = cb->bbio.bio.bi_iter.bi_size; | |
| /* | |
| * If we did not save space, it's pointless and wasteful | |
| * to have an inline compressed extent, so fallback to | |
| * an uncompressed inline extent. | |
| */ | |
| if (compressed_size >= i_size) { | |
| cleanup_compressed_bio(cb); | |
| cb = NULL; | |
| compressed_size = 0; | |
| } | |
| } | |
| } | |
| if (!can_cow_file_range_inline(inode, 0, i_size, compressed_size)) { | |
| if (cb) | |
| cleanup_compressed_bio(cb); | |
| return 1; | |
| } | |
| btrfs_lock_extent(&inode->io_tree, 0, blocksize - 1, &cached); | |
| if (cb) { | |
| ret = __cow_file_range_inline(inode, i_size, compressed_size, compress_type, | |
| bio_first_folio_all(&cb->bbio.bio), false); | |
| cleanup_compressed_bio(cb); | |
| cb = NULL; | |
| } else { | |
| ret = __cow_file_range_inline(inode, i_size, 0, BTRFS_COMPRESS_NONE, | |
| NULL, false); | |
| } | |
| /* | |
| * We failed to insert inline extent due to lack of meta space. | |
| * Just unlock the extent io range and fallback to regular COW/NOCOW path. | |
| */ | |
| if (ret > 0) { | |
| btrfs_unlock_extent(&inode->io_tree, 0, blocksize - 1, &cached); | |
| return ret; | |
| } | |
| /* | |
| * In the successful case (ret == 0 here), btrfs_run_delalloc_range() | |
| * will return 1. | |
| * | |
| * Quite a bit further up the callstack in extent_writepage(), ret == 1 | |
| * is treated as a short circuited success and does not unlock the folio, | |
| * so we must do it here. | |
| * | |
| * For failure case, the @locked_folio does get unlocked by | |
| * btrfs_folio_end_lock_bitmap(), so we must *not* unlock it here. | |
| * | |
| * So if ret == 0, we let extent_clear_unlock_delalloc() to unlock the | |
| * folio by passing NULL as @locked_folio. | |
| * Otherwise pass @locked_folio as usual. | |
| */ | |
| if (ret == 0) | |
| locked_folio = NULL; | |
| extent_clear_unlock_delalloc(inode, 0, blocksize - 1, locked_folio, &cached, | |
| EXTENT_DELALLOC | EXTENT_DELALLOC_NEW | EXTENT_DEFRAG | | |
| EXTENT_DO_ACCOUNTING | EXTENT_LOCKED, | |
| PAGE_UNLOCK | PAGE_START_WRITEBACK | PAGE_END_WRITEBACK); | |
| return ret; | |
| } | |
| /* | |
| * Function to process delayed allocation (create CoW) for ranges which are | |
| * being touched for the first time. | |
| */ | |
| int btrfs_run_delalloc_range(struct btrfs_inode *inode, struct folio *locked_folio, | |
| u64 start, u64 end, struct writeback_control *wbc) | |
| { | |
| const bool zoned = btrfs_is_zoned(inode->root->fs_info); | |
| /* | |
| * The range must cover part of the @locked_folio, or a return of 1 | |
| * can confuse the caller. | |
| */ | |
| ASSERT(!(end <= folio_pos(locked_folio) || | |
| start >= folio_next_pos(locked_folio))); | |
| if (start == 0 && end + 1 <= inode->root->fs_info->sectorsize && | |
| end + 1 >= inode->disk_i_size) { | |
| int ret; | |
| ret = run_delalloc_inline(inode, locked_folio); | |
| if (ret < 0) | |
| return ret; | |
| if (ret == 0) | |
| return 1; | |
| /* | |
| * Continue regular handling if we can not create an | |
| * inlined extent. | |
| */ | |
| } | |
| if (should_nocow(inode, start, end)) | |
| return run_delalloc_nocow(inode, locked_folio, start, end); | |
| if (btrfs_inode_can_compress(inode) && | |
| inode_need_compress(inode, start, end, false) && | |
| run_delalloc_compressed(inode, locked_folio, start, end, wbc)) | |
| return 1; | |
| if (zoned) | |
| return run_delalloc_cow(inode, locked_folio, start, end, wbc, true); | |
| else | |
| return cow_file_range(inode, locked_folio, start, end, NULL, 0); | |
| } | |
| void btrfs_split_delalloc_extent(struct btrfs_inode *inode, | |
| struct extent_state *orig, u64 split) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| u64 size; | |
| lockdep_assert_held(&inode->io_tree.lock); | |
| /* not delalloc, ignore it */ | |
| if (!(orig->state & EXTENT_DELALLOC)) | |
| return; | |
| size = orig->end - orig->start + 1; | |
| if (size > fs_info->max_extent_size) { | |
| u32 num_extents; | |
| u64 new_size; | |
| /* | |
| * See the explanation in btrfs_merge_delalloc_extent, the same | |
| * applies here, just in reverse. | |
| */ | |
| new_size = orig->end - split + 1; | |
| num_extents = count_max_extents(fs_info, new_size); | |
| new_size = split - orig->start; | |
| num_extents += count_max_extents(fs_info, new_size); | |
| if (count_max_extents(fs_info, size) >= num_extents) | |
| return; | |
| } | |
| spin_lock(&inode->lock); | |
| btrfs_mod_outstanding_extents(inode, 1); | |
| spin_unlock(&inode->lock); | |
| } | |
| /* | |
| * Handle merged delayed allocation extents so we can keep track of new extents | |
| * that are just merged onto old extents, such as when we are doing sequential | |
| * writes, so we can properly account for the metadata space we'll need. | |
| */ | |
| void btrfs_merge_delalloc_extent(struct btrfs_inode *inode, struct extent_state *new, | |
| struct extent_state *other) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| u64 new_size, old_size; | |
| u32 num_extents; | |
| lockdep_assert_held(&inode->io_tree.lock); | |
| /* not delalloc, ignore it */ | |
| if (!(other->state & EXTENT_DELALLOC)) | |
| return; | |
| if (new->start > other->start) | |
| new_size = new->end - other->start + 1; | |
| else | |
| new_size = other->end - new->start + 1; | |
| /* we're not bigger than the max, unreserve the space and go */ | |
| if (new_size <= fs_info->max_extent_size) { | |
| spin_lock(&inode->lock); | |
| btrfs_mod_outstanding_extents(inode, -1); | |
| spin_unlock(&inode->lock); | |
| return; | |
| } | |
| /* | |
| * We have to add up either side to figure out how many extents were | |
| * accounted for before we merged into one big extent. If the number of | |
| * extents we accounted for is <= the amount we need for the new range | |
| * then we can return, otherwise drop. Think of it like this | |
| * | |
| * [ 4k][MAX_SIZE] | |
| * | |
| * So we've grown the extent by a MAX_SIZE extent, this would mean we | |
| * need 2 outstanding extents, on one side we have 1 and the other side | |
| * we have 1 so they are == and we can return. But in this case | |
| * | |
| * [MAX_SIZE+4k][MAX_SIZE+4k] | |
| * | |
| * Each range on their own accounts for 2 extents, but merged together | |
| * they are only 3 extents worth of accounting, so we need to drop in | |
| * this case. | |
| */ | |
| old_size = other->end - other->start + 1; | |
| num_extents = count_max_extents(fs_info, old_size); | |
| old_size = new->end - new->start + 1; | |
| num_extents += count_max_extents(fs_info, old_size); | |
| if (count_max_extents(fs_info, new_size) >= num_extents) | |
| return; | |
| spin_lock(&inode->lock); | |
| btrfs_mod_outstanding_extents(inode, -1); | |
| spin_unlock(&inode->lock); | |
| } | |
| static void btrfs_add_delalloc_inode(struct btrfs_inode *inode) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| spin_lock(&root->delalloc_lock); | |
| ASSERT(list_empty(&inode->delalloc_inodes)); | |
| list_add_tail(&inode->delalloc_inodes, &root->delalloc_inodes); | |
| root->nr_delalloc_inodes++; | |
| if (root->nr_delalloc_inodes == 1) { | |
| spin_lock(&fs_info->delalloc_root_lock); | |
| ASSERT(list_empty(&root->delalloc_root)); | |
| list_add_tail(&root->delalloc_root, &fs_info->delalloc_roots); | |
| spin_unlock(&fs_info->delalloc_root_lock); | |
| } | |
| spin_unlock(&root->delalloc_lock); | |
| } | |
| void btrfs_del_delalloc_inode(struct btrfs_inode *inode) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| lockdep_assert_held(&root->delalloc_lock); | |
| /* | |
| * We may be called after the inode was already deleted from the list, | |
| * namely in the transaction abort path btrfs_destroy_delalloc_inodes(), | |
| * and then later through btrfs_clear_delalloc_extent() while the inode | |
| * still has ->delalloc_bytes > 0. | |
| */ | |
| if (!list_empty(&inode->delalloc_inodes)) { | |
| list_del_init(&inode->delalloc_inodes); | |
| root->nr_delalloc_inodes--; | |
| if (!root->nr_delalloc_inodes) { | |
| ASSERT(list_empty(&root->delalloc_inodes)); | |
| spin_lock(&fs_info->delalloc_root_lock); | |
| ASSERT(!list_empty(&root->delalloc_root)); | |
| list_del_init(&root->delalloc_root); | |
| spin_unlock(&fs_info->delalloc_root_lock); | |
| } | |
| } | |
| } | |
| /* | |
| * Properly track delayed allocation bytes in the inode and to maintain the | |
| * list of inodes that have pending delalloc work to be done. | |
| */ | |
| void btrfs_set_delalloc_extent(struct btrfs_inode *inode, struct extent_state *state, | |
| u32 bits) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| lockdep_assert_held(&inode->io_tree.lock); | |
| WARN_ON((bits & EXTENT_DEFRAG) && !(bits & EXTENT_DELALLOC)); | |
| /* | |
| * set_bit and clear bit hooks normally require _irqsave/restore | |
| * but in this case, we are only testing for the DELALLOC | |
| * bit, which is only set or cleared with irqs on | |
| */ | |
| if (!(state->state & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) { | |
| u64 len = state->end + 1 - state->start; | |
| u64 prev_delalloc_bytes; | |
| u32 num_extents = count_max_extents(fs_info, len); | |
| spin_lock(&inode->lock); | |
| btrfs_mod_outstanding_extents(inode, num_extents); | |
| spin_unlock(&inode->lock); | |
| /* For sanity tests */ | |
| if (btrfs_is_testing(fs_info)) | |
| return; | |
| percpu_counter_add_batch(&fs_info->delalloc_bytes, len, | |
| fs_info->delalloc_batch); | |
| spin_lock(&inode->lock); | |
| prev_delalloc_bytes = inode->delalloc_bytes; | |
| inode->delalloc_bytes += len; | |
| if (bits & EXTENT_DEFRAG) | |
| inode->defrag_bytes += len; | |
| spin_unlock(&inode->lock); | |
| /* | |
| * We don't need to be under the protection of the inode's lock, | |
| * because we are called while holding the inode's io_tree lock | |
| * and are therefore protected against concurrent calls of this | |
| * function and btrfs_clear_delalloc_extent(). | |
| */ | |
| if (!btrfs_is_free_space_inode(inode) && prev_delalloc_bytes == 0) | |
| btrfs_add_delalloc_inode(inode); | |
| } | |
| if (!(state->state & EXTENT_DELALLOC_NEW) && | |
| (bits & EXTENT_DELALLOC_NEW)) { | |
| spin_lock(&inode->lock); | |
| inode->new_delalloc_bytes += state->end + 1 - state->start; | |
| spin_unlock(&inode->lock); | |
| } | |
| } | |
| /* | |
| * Once a range is no longer delalloc this function ensures that proper | |
| * accounting happens. | |
| */ | |
| void btrfs_clear_delalloc_extent(struct btrfs_inode *inode, | |
| struct extent_state *state, u32 bits) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| u64 len = state->end + 1 - state->start; | |
| u32 num_extents = count_max_extents(fs_info, len); | |
| lockdep_assert_held(&inode->io_tree.lock); | |
| if ((state->state & EXTENT_DEFRAG) && (bits & EXTENT_DEFRAG)) { | |
| spin_lock(&inode->lock); | |
| inode->defrag_bytes -= len; | |
| spin_unlock(&inode->lock); | |
| } | |
| /* | |
| * set_bit and clear bit hooks normally require _irqsave/restore | |
| * but in this case, we are only testing for the DELALLOC | |
| * bit, which is only set or cleared with irqs on | |
| */ | |
| if ((state->state & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) { | |
| struct btrfs_root *root = inode->root; | |
| u64 new_delalloc_bytes; | |
| spin_lock(&inode->lock); | |
| btrfs_mod_outstanding_extents(inode, -num_extents); | |
| spin_unlock(&inode->lock); | |
| /* | |
| * We don't reserve metadata space for space cache inodes so we | |
| * don't need to call delalloc_release_metadata if there is an | |
| * error. | |
| */ | |
| if (bits & EXTENT_CLEAR_META_RESV && | |
| root != fs_info->tree_root) | |
| btrfs_delalloc_release_metadata(inode, len, true); | |
| /* For sanity tests. */ | |
| if (btrfs_is_testing(fs_info)) | |
| return; | |
| if (!btrfs_is_data_reloc_root(root) && | |
| !btrfs_is_free_space_inode(inode) && | |
| !(state->state & EXTENT_NORESERVE) && | |
| (bits & EXTENT_CLEAR_DATA_RESV)) | |
| btrfs_free_reserved_data_space_noquota(inode, len); | |
| percpu_counter_add_batch(&fs_info->delalloc_bytes, -len, | |
| fs_info->delalloc_batch); | |
| spin_lock(&inode->lock); | |
| inode->delalloc_bytes -= len; | |
| new_delalloc_bytes = inode->delalloc_bytes; | |
| spin_unlock(&inode->lock); | |
| /* | |
| * We don't need to be under the protection of the inode's lock, | |
| * because we are called while holding the inode's io_tree lock | |
| * and are therefore protected against concurrent calls of this | |
| * function and btrfs_set_delalloc_extent(). | |
| */ | |
| if (!btrfs_is_free_space_inode(inode) && new_delalloc_bytes == 0) { | |
| spin_lock(&root->delalloc_lock); | |
| btrfs_del_delalloc_inode(inode); | |
| spin_unlock(&root->delalloc_lock); | |
| } | |
| } | |
| if ((state->state & EXTENT_DELALLOC_NEW) && | |
| (bits & EXTENT_DELALLOC_NEW)) { | |
| spin_lock(&inode->lock); | |
| ASSERT(inode->new_delalloc_bytes >= len); | |
| inode->new_delalloc_bytes -= len; | |
| if (bits & EXTENT_ADD_INODE_BYTES) | |
| inode_add_bytes(&inode->vfs_inode, len); | |
| spin_unlock(&inode->lock); | |
| } | |
| } | |
| /* | |
| * Given an ordered extent and insert all its checksums into the csum tree. | |
| * | |
| * This happens at IO completion time based on sums calculated at bio | |
| * submission time. | |
| */ | |
| static int add_pending_csums(struct btrfs_trans_handle *trans, | |
| struct btrfs_ordered_extent *oe) | |
| { | |
| struct btrfs_ordered_sum *sum; | |
| struct btrfs_root *csum_root = NULL; | |
| int ret; | |
| list_for_each_entry(sum, &oe->csum_list, list) { | |
| if (!csum_root) { | |
| csum_root = btrfs_csum_root(trans->fs_info, | |
| sum->logical); | |
| if (unlikely(!csum_root)) { | |
| btrfs_err(trans->fs_info, | |
| "missing csum root for extent at bytenr %llu", | |
| sum->logical); | |
| return -EUCLEAN; | |
| } | |
| } | |
| trans->adding_csums = true; | |
| ret = btrfs_insert_data_csums(trans, csum_root, sum); | |
| trans->adding_csums = false; | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int btrfs_find_new_delalloc_bytes(struct btrfs_inode *inode, | |
| const u64 start, | |
| const u64 len, | |
| struct extent_state **cached_state) | |
| { | |
| u64 search_start = start; | |
| const u64 end = start + len - 1; | |
| while (search_start < end) { | |
| const u64 search_len = end - search_start + 1; | |
| struct extent_map *em; | |
| u64 em_len; | |
| int ret = 0; | |
| em = btrfs_get_extent(inode, NULL, search_start, search_len); | |
| if (IS_ERR(em)) | |
| return PTR_ERR(em); | |
| if (em->disk_bytenr != EXTENT_MAP_HOLE) | |
| goto next; | |
| em_len = em->len; | |
| if (em->start < search_start) | |
| em_len -= search_start - em->start; | |
| if (em_len > search_len) | |
| em_len = search_len; | |
| ret = btrfs_set_extent_bit(&inode->io_tree, search_start, | |
| search_start + em_len - 1, | |
| EXTENT_DELALLOC_NEW, cached_state); | |
| next: | |
| search_start = btrfs_extent_map_end(em); | |
| btrfs_free_extent_map(em); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| int btrfs_set_extent_delalloc(struct btrfs_inode *inode, u64 start, u64 end, | |
| unsigned int extra_bits, | |
| struct extent_state **cached_state) | |
| { | |
| const u32 blocksize = inode->root->fs_info->sectorsize; | |
| /* Basic alignment check. */ | |
| ASSERT(IS_ALIGNED(start, blocksize), "start=%llu blocksize=%u", | |
| start, blocksize); | |
| ASSERT(IS_ALIGNED(end + 1, blocksize), "inclusive end=%llu blocksize=%u", | |
| end, blocksize); | |
| if (start >= i_size_read(&inode->vfs_inode) && | |
| !(inode->flags & BTRFS_INODE_PREALLOC)) { | |
| /* | |
| * There can't be any extents following eof in this case so just | |
| * set the delalloc new bit for the range directly. | |
| */ | |
| extra_bits |= EXTENT_DELALLOC_NEW; | |
| } else { | |
| int ret; | |
| ret = btrfs_find_new_delalloc_bytes(inode, start, | |
| end + 1 - start, | |
| cached_state); | |
| if (ret) | |
| return ret; | |
| } | |
| return btrfs_set_extent_bit(&inode->io_tree, start, end, | |
| EXTENT_DELALLOC | extra_bits, cached_state); | |
| } | |
| struct btrfs_writepage_fixup { | |
| struct folio *folio; | |
| struct btrfs_inode *inode; | |
| struct work_struct work; | |
| }; | |
| /* | |
| * Do the real fixup work of reserving space for the blocks a folio's fixup | |
| * state records. Queued by writepage_fixup() when writeback found the bits set. | |
| * | |
| * Since the fixup can be cancelled by a task dirtying with a reservation, we must | |
| * re-check the state of fixup under the folio lock. | |
| */ | |
| static void btrfs_writepage_fixup_worker(struct work_struct *work) | |
| { | |
| struct btrfs_writepage_fixup *fixup = | |
| container_of(work, struct btrfs_writepage_fixup, work); | |
| struct extent_state *cached_state = NULL; | |
| struct extent_changeset *data_reserved = NULL; | |
| unsigned long delalloc_bitmap[BITS_TO_LONGS(BTRFS_MAX_BLOCKS_PER_FOLIO)] = { 0 }; | |
| struct folio *folio = fixup->folio; | |
| struct btrfs_inode *inode = fixup->inode; | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| const unsigned int blocks_per_folio = btrfs_blocks_per_folio(fs_info, folio); | |
| const u32 sectorsize = fs_info->sectorsize; | |
| const u64 page_start = folio_pos(folio); | |
| const u64 page_end = folio_next_pos(folio) - 1; | |
| unsigned int start_bit; | |
| unsigned int end_bit; | |
| unsigned int bit; | |
| bool reserved; | |
| int ret; | |
| /* | |
| * We would prefer to reserve under the folio lock when we know exactly | |
| * which blocks need a reservation. Unfortunately, since the reservation | |
| * can go into flushers which can go into writeback, which takes folio | |
| * locks, that is not possible. Therefore, we have to reserve for the | |
| * whole folio here, then release what we didn't end up needing once we | |
| * figure it out. | |
| * | |
| * Also note the slightly strange error checking. If fixup is actually | |
| * not set, we don't need to mark an error on the mapping. So hang on to | |
| * ret until after we lock and find out if we actually care. | |
| */ | |
| ret = btrfs_delalloc_reserve_space(inode, &data_reserved, page_start, | |
| folio_size(folio)); | |
| reserved = (ret == 0); | |
| again: | |
| folio_lock(folio); | |
| if (!folio->mapping || !folio_test_fixup_pending(folio)) { | |
| ret = 0; | |
| goto out; | |
| } | |
| if (ret) | |
| goto out; | |
| btrfs_lock_extent(&inode->io_tree, page_start, page_end, &cached_state); | |
| for (bit = 0; bit < blocks_per_folio; bit++) { | |
| struct btrfs_ordered_extent *ordered; | |
| const u64 start = page_start + (bit << fs_info->sectorsize_bits); | |
| if (test_bit(bit, delalloc_bitmap)) | |
| continue; | |
| if (!btrfs_folio_test_fixup(fs_info, folio, start, sectorsize)) | |
| continue; | |
| /* | |
| * Any task that sets EXTENT_DELALLOC clears the fixup bits | |
| * under the folio lock, so it should be impossible to observe | |
| * both under the lock. Setting delalloc twice would wrongly | |
| * double account the space. | |
| */ | |
| if (IS_ENABLED(CONFIG_BTRFS_DEBUG) && | |
| unlikely(btrfs_test_range_bit_exists(&inode->io_tree, start, | |
| start + sectorsize - 1, | |
| EXTENT_DELALLOC))) { | |
| DEBUG_WARN("fixup worker: delalloc and fixup conflict. ino %llu start %llu", | |
| btrfs_ino(inode), start); | |
| btrfs_folio_clear_fixup(fs_info, folio, start, sectorsize); | |
| continue; | |
| } | |
| ordered = btrfs_lookup_ordered_range(inode, start, sectorsize); | |
| if (ordered) { | |
| trace_btrfs_writepage_fixup_defer(inode, ordered); | |
| btrfs_unlock_extent(&inode->io_tree, page_start, | |
| page_end, &cached_state); | |
| folio_unlock(folio); | |
| btrfs_start_ordered_extent(ordered); | |
| btrfs_put_ordered_extent(ordered); | |
| goto again; | |
| } | |
| ret = btrfs_set_extent_delalloc(inode, start, | |
| start + sectorsize - 1, 0, | |
| &cached_state); | |
| if (ret) | |
| break; | |
| trace_btrfs_writepage_fixup_reserve(inode, start, sectorsize); | |
| btrfs_folio_clear_fixup(fs_info, folio, start, sectorsize); | |
| set_bit(bit, delalloc_bitmap); | |
| } | |
| btrfs_unlock_extent(&inode->io_tree, page_start, page_end, &cached_state); | |
| out: | |
| if (ret < 0) { | |
| /* Failure here is analogous to failure in writeback. */ | |
| mapping_set_error(folio->mapping, ret); | |
| btrfs_folio_clear_fixup_dirty(fs_info, folio, page_start, | |
| folio_size(folio)); | |
| } | |
| if (reserved) { | |
| btrfs_delalloc_release_extents(inode, folio_size(folio)); | |
| for_each_clear_bitrange(start_bit, end_bit, delalloc_bitmap, | |
| blocks_per_folio) | |
| btrfs_delalloc_release_space(inode, data_reserved, | |
| page_start + (start_bit << fs_info->sectorsize_bits), | |
| (end_bit - start_bit) << fs_info->sectorsize_bits, | |
| true); | |
| } | |
| folio_unlock(folio); | |
| folio_put(folio); | |
| kfree(fixup); | |
| extent_changeset_free(data_reserved); | |
| btrfs_add_delayed_iput(inode); | |
| } | |
| /* | |
| * Queue space reservation fixup work for blocks dirtied without a space reservation. | |
| * | |
| * Should be used by writeback while holding the folio locked. | |
| * | |
| * If we fail to queue fixup, then the folio state is unchanged and a future | |
| * writeback pass will still see it. | |
| */ | |
| void btrfs_queue_writepage_fixup(struct btrfs_inode *inode, struct folio *folio) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| struct btrfs_writepage_fixup *fixup; | |
| /* | |
| * Disallow queueing more fixup during unmount to break the cycle | |
| * of writeback queuing fixup queuing writeback etc. | |
| * | |
| * If it actually hit, then something which was fixup wasn't written | |
| * which we should warn about. | |
| */ | |
| if (btrfs_fs_closing(fs_info)) { | |
| btrfs_warn_rl(fs_info, | |
| "dropping unqueued fixup blocks at unmount. root %lld ino %llu folio %llu", | |
| btrfs_root_id(inode->root), btrfs_ino(inode), | |
| folio_pos(folio)); | |
| btrfs_folio_clear_fixup_dirty(fs_info, folio, | |
| folio_pos(folio), folio_size(folio)); | |
| return; | |
| } | |
| fixup = kzalloc_obj(*fixup, GFP_NOFS); | |
| if (!fixup) | |
| return; | |
| /* | |
| * This is called from within extent_write_cache_pages() which | |
| * has successfully done an igrab(). But that will be released at the | |
| * end of the writeback pass. We need to extend it for the worker as well. | |
| */ | |
| ihold(&inode->vfs_inode); | |
| folio_get(folio); | |
| INIT_WORK(&fixup->work, btrfs_writepage_fixup_worker); | |
| fixup->folio = folio; | |
| fixup->inode = inode; | |
| queue_work(fs_info->fixup_workers, &fixup->work); | |
| } | |
| /* | |
| * Clear the old accounting flags and set EXTENT_DELALLOC for the range. | |
| * | |
| * Return <0 for error, in that case no range has EXTENT_DELALLOC bit cleared or set. | |
| */ | |
| int btrfs_reset_extent_delalloc(struct btrfs_inode *inode, u64 start, u64 end, | |
| unsigned int extra_bits, struct extent_state **cached_state) | |
| { | |
| const u32 blocksize = inode->root->fs_info->sectorsize; | |
| /* The @extra_bits can only be EXTENT_NORESERVE for now. */ | |
| ASSERT(!(extra_bits & ~EXTENT_NORESERVE), "extra_bits=0x%x", extra_bits); | |
| /* Basic alignment check. */ | |
| ASSERT(IS_ALIGNED(start, blocksize), "start=%llu blocksize=%u", | |
| start, blocksize); | |
| ASSERT(IS_ALIGNED(end + 1, blocksize), "inclusive end=%llu blocksize=%u", | |
| end, blocksize); | |
| /* | |
| * Check and set DELALLOC_NEW flag, this needs to search tree thus can | |
| * fail early. Thus we want to do this before clearing EXTENT_DELALLOC. | |
| */ | |
| if (start >= i_size_read(&inode->vfs_inode) && | |
| !(inode->flags & BTRFS_INODE_PREALLOC)) { | |
| /* | |
| * There can't be any extents following EOF in this case so just | |
| * set the delalloc new bit for the range directly. | |
| */ | |
| extra_bits |= EXTENT_DELALLOC_NEW; | |
| } else { | |
| int ret; | |
| ret = btrfs_find_new_delalloc_bytes(inode, start, end + 1 - start, | |
| NULL); | |
| if (unlikely(ret)) | |
| return ret; | |
| } | |
| /* Clear the old accounting as the range may already be dirty. */ | |
| btrfs_clear_extent_bit(&inode->io_tree, start, end, | |
| EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING | | |
| EXTENT_DEFRAG, cached_state); | |
| return btrfs_set_extent_bit(&inode->io_tree, start, end, | |
| EXTENT_DELALLOC | extra_bits, cached_state); | |
| } | |
| static int insert_reserved_file_extent(struct btrfs_trans_handle *trans, | |
| struct btrfs_inode *inode, u64 file_pos, | |
| struct btrfs_file_extent_item *stack_fi, | |
| const bool update_inode_bytes, | |
| u64 qgroup_reserved) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| const u32 sectorsize = root->fs_info->sectorsize; | |
| BTRFS_PATH_AUTO_FREE(path); | |
| struct extent_buffer *leaf; | |
| struct btrfs_key ins; | |
| u64 disk_num_bytes = btrfs_stack_file_extent_disk_num_bytes(stack_fi); | |
| u64 disk_bytenr = btrfs_stack_file_extent_disk_bytenr(stack_fi); | |
| u64 offset = btrfs_stack_file_extent_offset(stack_fi); | |
| u64 num_bytes = btrfs_stack_file_extent_num_bytes(stack_fi); | |
| u64 ram_bytes = btrfs_stack_file_extent_ram_bytes(stack_fi); | |
| struct btrfs_drop_extents_args drop_args = { 0 }; | |
| int ret; | |
| path = btrfs_alloc_path(); | |
| if (!path) | |
| return -ENOMEM; | |
| /* | |
| * we may be replacing one extent in the tree with another. | |
| * The new extent is pinned in the extent map, and we don't want | |
| * to drop it from the cache until it is completely in the btree. | |
| * | |
| * So, tell btrfs_drop_extents to leave this extent in the cache. | |
| * the caller is expected to unpin it and allow it to be merged | |
| * with the others. | |
| */ | |
| drop_args.path = path; | |
| drop_args.start = file_pos; | |
| drop_args.end = file_pos + num_bytes; | |
| drop_args.replace_extent = true; | |
| drop_args.extent_item_size = sizeof(*stack_fi); | |
| ret = btrfs_drop_extents(trans, root, inode, &drop_args); | |
| if (ret) | |
| return ret; | |
| if (!drop_args.extent_inserted) { | |
| ins.objectid = btrfs_ino(inode); | |
| ins.type = BTRFS_EXTENT_DATA_KEY; | |
| ins.offset = file_pos; | |
| ret = btrfs_insert_empty_item(trans, root, path, &ins, | |
| sizeof(*stack_fi)); | |
| if (ret) | |
| return ret; | |
| } | |
| leaf = path->nodes[0]; | |
| btrfs_set_stack_file_extent_generation(stack_fi, trans->transid); | |
| write_extent_buffer(leaf, stack_fi, | |
| btrfs_item_ptr_offset(leaf, path->slots[0]), | |
| sizeof(struct btrfs_file_extent_item)); | |
| btrfs_release_path(path); | |
| /* | |
| * If we dropped an inline extent here, we know the range where it is | |
| * was not marked with the EXTENT_DELALLOC_NEW bit, so we update the | |
| * number of bytes only for that range containing the inline extent. | |
| * The remaining of the range will be processed when clearing the | |
| * EXTENT_DELALLOC_BIT bit through the ordered extent completion. | |
| */ | |
| if (file_pos == 0 && !IS_ALIGNED(drop_args.bytes_found, sectorsize)) { | |
| u64 inline_size = round_down(drop_args.bytes_found, sectorsize); | |
| inline_size = drop_args.bytes_found - inline_size; | |
| btrfs_update_inode_bytes(inode, sectorsize, inline_size); | |
| drop_args.bytes_found -= inline_size; | |
| num_bytes -= sectorsize; | |
| } | |
| if (update_inode_bytes) | |
| btrfs_update_inode_bytes(inode, num_bytes, drop_args.bytes_found); | |
| ins.objectid = disk_bytenr; | |
| ins.type = BTRFS_EXTENT_ITEM_KEY; | |
| ins.offset = disk_num_bytes; | |
| ret = btrfs_inode_set_file_extent_range(inode, file_pos, ram_bytes); | |
| if (ret) | |
| return ret; | |
| return btrfs_alloc_reserved_file_extent(trans, root, btrfs_ino(inode), | |
| file_pos - offset, | |
| qgroup_reserved, &ins); | |
| } | |
| static void btrfs_release_delalloc_bytes(struct btrfs_fs_info *fs_info, | |
| u64 start, u64 len) | |
| { | |
| struct btrfs_block_group *cache; | |
| cache = btrfs_lookup_block_group(fs_info, start); | |
| ASSERT(cache); | |
| spin_lock(&cache->lock); | |
| cache->delalloc_bytes -= len; | |
| spin_unlock(&cache->lock); | |
| btrfs_put_block_group(cache); | |
| } | |
| static int insert_ordered_extent_file_extent(struct btrfs_trans_handle *trans, | |
| struct btrfs_ordered_extent *oe) | |
| { | |
| struct btrfs_file_extent_item stack_fi; | |
| bool update_inode_bytes; | |
| u64 num_bytes = oe->num_bytes; | |
| u64 ram_bytes = oe->ram_bytes; | |
| memset(&stack_fi, 0, sizeof(stack_fi)); | |
| btrfs_set_stack_file_extent_type(&stack_fi, BTRFS_FILE_EXTENT_REG); | |
| btrfs_set_stack_file_extent_disk_bytenr(&stack_fi, oe->disk_bytenr); | |
| btrfs_set_stack_file_extent_disk_num_bytes(&stack_fi, | |
| oe->disk_num_bytes); | |
| btrfs_set_stack_file_extent_offset(&stack_fi, oe->offset); | |
| if (test_bit(BTRFS_ORDERED_TRUNCATED, &oe->flags)) | |
| num_bytes = oe->truncated_len; | |
| btrfs_set_stack_file_extent_num_bytes(&stack_fi, num_bytes); | |
| btrfs_set_stack_file_extent_ram_bytes(&stack_fi, ram_bytes); | |
| btrfs_set_stack_file_extent_compression(&stack_fi, oe->compress_type); | |
| /* Encryption and other encoding is reserved and all 0 */ | |
| /* | |
| * For delalloc, when completing an ordered extent we update the inode's | |
| * bytes when clearing the range in the inode's io tree, so pass false | |
| * as the argument 'update_inode_bytes' to insert_reserved_file_extent(), | |
| * except if the ordered extent was truncated. | |
| */ | |
| update_inode_bytes = test_bit(BTRFS_ORDERED_DIRECT, &oe->flags) || | |
| test_bit(BTRFS_ORDERED_ENCODED, &oe->flags) || | |
| test_bit(BTRFS_ORDERED_TRUNCATED, &oe->flags); | |
| return insert_reserved_file_extent(trans, oe->inode, | |
| oe->file_offset, &stack_fi, | |
| update_inode_bytes, oe->qgroup_rsv); | |
| } | |
| /* | |
| * As ordered data IO finishes, this gets called so we can finish | |
| * an ordered extent if the range of bytes in the file it covers are | |
| * fully written. | |
| */ | |
| int btrfs_finish_one_ordered(struct btrfs_ordered_extent *ordered_extent) | |
| { | |
| struct btrfs_inode *inode = ordered_extent->inode; | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct btrfs_trans_handle *trans = NULL; | |
| struct extent_io_tree *io_tree = &inode->io_tree; | |
| struct extent_state *cached_state = NULL; | |
| u64 start, end; | |
| int compress_type = 0; | |
| int ret = 0; | |
| u64 logical_len = ordered_extent->num_bytes; | |
| bool freespace_inode; | |
| bool truncated = false; | |
| bool clear_reserved_extent = true; | |
| unsigned int clear_bits = 0; | |
| start = ordered_extent->file_offset; | |
| end = start + ordered_extent->num_bytes - 1; | |
| if (!test_bit(BTRFS_ORDERED_NOCOW, &ordered_extent->flags) && | |
| !test_bit(BTRFS_ORDERED_PREALLOC, &ordered_extent->flags) && | |
| !test_bit(BTRFS_ORDERED_DIRECT, &ordered_extent->flags) && | |
| !test_bit(BTRFS_ORDERED_ENCODED, &ordered_extent->flags)) | |
| clear_bits |= EXTENT_DELALLOC_NEW; | |
| if (!test_bit(BTRFS_ORDERED_NOCOW, &ordered_extent->flags)) | |
| clear_bits |= EXTENT_DEFRAG; | |
| freespace_inode = btrfs_is_free_space_inode(inode); | |
| if (!freespace_inode) | |
| btrfs_lockdep_acquire(fs_info, btrfs_ordered_extent); | |
| if (unlikely(test_bit(BTRFS_ORDERED_IOERR, &ordered_extent->flags))) { | |
| ret = -EIO; | |
| goto out; | |
| } | |
| ret = btrfs_zone_finish_endio(fs_info, ordered_extent->disk_bytenr, | |
| ordered_extent->disk_num_bytes); | |
| if (ret) | |
| goto out; | |
| if (test_bit(BTRFS_ORDERED_TRUNCATED, &ordered_extent->flags)) { | |
| truncated = true; | |
| logical_len = ordered_extent->truncated_len; | |
| /* Truncated the entire extent, don't bother adding */ | |
| if (!logical_len) | |
| goto out; | |
| } | |
| /* | |
| * If it's a COW write we need to lock the extent range as we will be | |
| * inserting/replacing file extent items and unpinning an extent map. | |
| * This must be taken before joining a transaction, as it's a higher | |
| * level lock (like the inode's VFS lock), otherwise we can run into an | |
| * ABBA deadlock with other tasks (transactions work like a lock, | |
| * depending on their current state). | |
| */ | |
| if (!test_bit(BTRFS_ORDERED_NOCOW, &ordered_extent->flags)) { | |
| clear_bits |= EXTENT_LOCKED | EXTENT_FINISHING_ORDERED; | |
| btrfs_lock_extent_bits(io_tree, start, end, | |
| EXTENT_LOCKED | EXTENT_FINISHING_ORDERED, | |
| &cached_state); | |
| } | |
| if (freespace_inode) | |
| trans = btrfs_join_transaction_spacecache(root); | |
| else | |
| trans = btrfs_join_transaction(root); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| trans = NULL; | |
| goto out; | |
| } | |
| trans->block_rsv = &inode->block_rsv; | |
| ret = btrfs_insert_raid_extent(trans, ordered_extent); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out; | |
| } | |
| if (test_bit(BTRFS_ORDERED_NOCOW, &ordered_extent->flags)) { | |
| /* Logic error */ | |
| ASSERT(list_empty(&ordered_extent->csum_list)); | |
| if (unlikely(!list_empty(&ordered_extent->csum_list))) { | |
| ret = -EINVAL; | |
| btrfs_abort_transaction(trans, ret); | |
| goto out; | |
| } | |
| btrfs_inode_safe_disk_i_size_write(inode, 0); | |
| ret = btrfs_update_inode_fallback(trans, inode); | |
| if (unlikely(ret)) { | |
| /* -ENOMEM or corruption */ | |
| btrfs_abort_transaction(trans, ret); | |
| } | |
| goto out; | |
| } | |
| if (test_bit(BTRFS_ORDERED_COMPRESSED, &ordered_extent->flags)) | |
| compress_type = ordered_extent->compress_type; | |
| if (test_bit(BTRFS_ORDERED_PREALLOC, &ordered_extent->flags)) { | |
| BUG_ON(compress_type); | |
| ret = btrfs_mark_extent_written(trans, inode, | |
| ordered_extent->file_offset, | |
| ordered_extent->file_offset + | |
| logical_len); | |
| btrfs_zoned_release_data_reloc_bg(fs_info, ordered_extent->disk_bytenr, | |
| ordered_extent->disk_num_bytes); | |
| if (unlikely(ret < 0)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out; | |
| } | |
| } else { | |
| BUG_ON(root == fs_info->tree_root); | |
| ret = insert_ordered_extent_file_extent(trans, ordered_extent); | |
| if (unlikely(ret < 0)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out; | |
| } | |
| clear_reserved_extent = false; | |
| btrfs_release_delalloc_bytes(fs_info, | |
| ordered_extent->disk_bytenr, | |
| ordered_extent->disk_num_bytes); | |
| } | |
| ret = btrfs_unpin_extent_cache(inode, ordered_extent->file_offset, | |
| ordered_extent->num_bytes, trans->transid); | |
| if (unlikely(ret < 0)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out; | |
| } | |
| ret = add_pending_csums(trans, ordered_extent); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out; | |
| } | |
| /* | |
| * If this is a new delalloc range, clear its new delalloc flag to | |
| * update the inode's number of bytes. This needs to be done first | |
| * before updating the inode item. | |
| */ | |
| if ((clear_bits & EXTENT_DELALLOC_NEW) && | |
| !test_bit(BTRFS_ORDERED_TRUNCATED, &ordered_extent->flags)) | |
| btrfs_clear_extent_bit(&inode->io_tree, start, end, | |
| EXTENT_DELALLOC_NEW | EXTENT_ADD_INODE_BYTES, | |
| &cached_state); | |
| btrfs_inode_safe_disk_i_size_write(inode, 0); | |
| ret = btrfs_update_inode_fallback(trans, inode); | |
| if (unlikely(ret)) { /* -ENOMEM or corruption */ | |
| btrfs_abort_transaction(trans, ret); | |
| goto out; | |
| } | |
| out: | |
| if (clear_bits) | |
| btrfs_clear_extent_bit(&inode->io_tree, start, end, clear_bits, | |
| &cached_state); | |
| if (trans) | |
| btrfs_end_transaction(trans); | |
| if (ret || truncated) { | |
| /* | |
| * If we failed to finish this ordered extent for any reason we | |
| * need to make sure BTRFS_ORDERED_IOERR is set on the ordered | |
| * extent, and mark the inode with the error if it wasn't | |
| * already set. Any error during writeback would have already | |
| * set the mapping error, so we need to set it if we're the ones | |
| * marking this ordered extent as failed. | |
| */ | |
| if (ret) | |
| btrfs_mark_ordered_extent_error(ordered_extent); | |
| /* | |
| * Drop extent maps for the part of the extent we didn't write. | |
| * | |
| * We have an exception here for the free_space_inode, this is | |
| * because when we do btrfs_get_extent() on the free space inode | |
| * we will search the commit root. If this is a new block group | |
| * we won't find anything, and we will trip over the assert in | |
| * writepage where we do ASSERT(em->block_start != | |
| * EXTENT_MAP_HOLE). | |
| * | |
| * Theoretically we could also skip this for any NOCOW extent as | |
| * we don't mess with the extent map tree in the NOCOW case, but | |
| * for now simply skip this if we are the free space inode. | |
| */ | |
| if (!btrfs_is_free_space_inode(inode)) { | |
| u64 unwritten_start = start; | |
| if (truncated) | |
| unwritten_start += logical_len; | |
| btrfs_drop_extent_map_range(inode, unwritten_start, | |
| end, false); | |
| } | |
| /* | |
| * If the ordered extent had an IOERR or something else went | |
| * wrong we need to return the space for this ordered extent | |
| * back to the allocator. We only free the extent in the | |
| * truncated case if we didn't write out the extent at all. | |
| * | |
| * If we made it past insert_reserved_file_extent before we | |
| * errored out then we don't need to do this as the accounting | |
| * has already been done. | |
| */ | |
| if ((ret || !logical_len) && | |
| clear_reserved_extent && | |
| !test_bit(BTRFS_ORDERED_NOCOW, &ordered_extent->flags) && | |
| !test_bit(BTRFS_ORDERED_PREALLOC, &ordered_extent->flags)) { | |
| /* | |
| * Discard the range before returning it back to the | |
| * free space pool | |
| */ | |
| if (ret && btrfs_test_opt(fs_info, DISCARD_SYNC)) | |
| btrfs_discard_extent(fs_info, | |
| ordered_extent->disk_bytenr, | |
| ordered_extent->disk_num_bytes, | |
| NULL, true); | |
| btrfs_free_reserved_extent(fs_info, | |
| ordered_extent->disk_bytenr, | |
| ordered_extent->disk_num_bytes, true); | |
| /* | |
| * Actually free the qgroup rsv which was released when | |
| * the ordered extent was created. | |
| */ | |
| btrfs_qgroup_free_refroot(fs_info, btrfs_root_id(inode->root), | |
| ordered_extent->qgroup_rsv, | |
| BTRFS_QGROUP_RSV_DATA); | |
| } | |
| } | |
| /* | |
| * This needs to be done to make sure anybody waiting knows we are done | |
| * updating everything for this ordered extent. | |
| */ | |
| btrfs_remove_ordered_extent(ordered_extent); | |
| /* Cleanup any remaining biocs attached to the OE. */ | |
| btrfs_cleanup_ordered_bioc_list(ordered_extent); | |
| /* once for us */ | |
| btrfs_put_ordered_extent(ordered_extent); | |
| /* once for the tree */ | |
| btrfs_put_ordered_extent(ordered_extent); | |
| return ret; | |
| } | |
| int btrfs_finish_ordered_io(struct btrfs_ordered_extent *ordered) | |
| { | |
| if (btrfs_is_zoned(ordered->inode->root->fs_info) && | |
| !test_bit(BTRFS_ORDERED_IOERR, &ordered->flags) && | |
| list_empty(&ordered->bioc_list)) | |
| btrfs_finish_ordered_zoned(ordered); | |
| return btrfs_finish_one_ordered(ordered); | |
| } | |
| /* | |
| * Calculate the checksum of an fs block at physical memory address @paddr, | |
| * and save the result to @dest. | |
| * | |
| * The folio containing @paddr must be large enough to contain a full fs block. | |
| */ | |
| void btrfs_calculate_block_csum_folio(struct btrfs_fs_info *fs_info, | |
| const phys_addr_t paddr, u8 *dest) | |
| { | |
| struct folio *folio = page_folio(phys_to_page(paddr)); | |
| const u32 blocksize = fs_info->sectorsize; | |
| const u32 step = min(blocksize, PAGE_SIZE); | |
| const u32 nr_steps = blocksize / step; | |
| phys_addr_t paddrs[BTRFS_MAX_BLOCKSIZE / PAGE_SIZE]; | |
| /* The full block must be inside the folio. */ | |
| ASSERT(offset_in_folio(folio, paddr) + blocksize <= folio_size(folio)); | |
| for (int i = 0; i < nr_steps; i++) { | |
| u32 pindex = offset_in_folio(folio, paddr + i * step) >> PAGE_SHIFT; | |
| /* | |
| * For bs <= ps cases, we will only run the loop once, so the offset | |
| * inside the page will only added to paddrs[0]. | |
| * | |
| * For bs > ps cases, the block must be page aligned, thus offset | |
| * inside the page will always be 0. | |
| */ | |
| paddrs[i] = page_to_phys(folio_page(folio, pindex)) + offset_in_page(paddr); | |
| } | |
| return btrfs_calculate_block_csum_pages(fs_info, paddrs, dest); | |
| } | |
| /* | |
| * Calculate the checksum of a fs block backed by multiple noncontiguous pages | |
| * at @paddrs[] and save the result to @dest. | |
| * | |
| * The folio containing @paddr must be large enough to contain a full fs block. | |
| */ | |
| void btrfs_calculate_block_csum_pages(struct btrfs_fs_info *fs_info, | |
| const phys_addr_t paddrs[], u8 *dest) | |
| { | |
| const u32 blocksize = fs_info->sectorsize; | |
| const u32 step = min(blocksize, PAGE_SIZE); | |
| const u32 nr_steps = blocksize / step; | |
| struct btrfs_csum_ctx csum; | |
| btrfs_csum_init(&csum, fs_info->csum_type); | |
| for (int i = 0; i < nr_steps; i++) { | |
| const phys_addr_t paddr = paddrs[i]; | |
| void *kaddr; | |
| ASSERT(offset_in_page(paddr) + step <= PAGE_SIZE); | |
| kaddr = kmap_local_page(phys_to_page(paddr)) + offset_in_page(paddr); | |
| btrfs_csum_update(&csum, kaddr, step); | |
| kunmap_local(kaddr); | |
| } | |
| btrfs_csum_final(&csum, dest); | |
| } | |
| /* | |
| * Verify the checksum for a single sector without any extra action that depend | |
| * on the type of I/O. | |
| * | |
| * @kaddr must be a properly kmapped address. | |
| */ | |
| int btrfs_check_block_csum(struct btrfs_fs_info *fs_info, phys_addr_t paddr, u8 *csum, | |
| const u8 * const csum_expected) | |
| { | |
| btrfs_calculate_block_csum_folio(fs_info, paddr, csum); | |
| if (unlikely(memcmp(csum, csum_expected, fs_info->csum_size) != 0)) | |
| return -EIO; | |
| return 0; | |
| } | |
| /* | |
| * Verify the checksum of a single data sector, which can be scattered at | |
| * different noncontiguous pages. | |
| * | |
| * @bbio: btrfs_io_bio which contains the csum | |
| * @dev: device the sector is on | |
| * @bio_offset: offset to the beginning of the bio (in bytes) | |
| * @paddrs: physical addresses which back the fs block | |
| * | |
| * Check if the checksum on a data block is valid. When a checksum mismatch is | |
| * detected, report the error and fill the corrupted range with zero. | |
| * | |
| * Return %true if the sector is ok or had no checksum to start with, else %false. | |
| */ | |
| bool btrfs_data_csum_ok(struct btrfs_bio *bbio, struct btrfs_device *dev, | |
| u32 bio_offset, const phys_addr_t paddrs[]) | |
| { | |
| struct btrfs_inode *inode = bbio->inode; | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| const u32 blocksize = fs_info->sectorsize; | |
| const u32 step = min(blocksize, PAGE_SIZE); | |
| const u32 nr_steps = blocksize / step; | |
| u64 file_offset = bbio->file_offset + bio_offset; | |
| u64 end = file_offset + blocksize - 1; | |
| u8 *csum_expected; | |
| u8 csum[BTRFS_CSUM_SIZE]; | |
| if (!bbio->csum) | |
| return true; | |
| if (btrfs_is_data_reloc_root(inode->root) && | |
| btrfs_test_range_bit(&inode->io_tree, file_offset, end, EXTENT_NODATASUM, | |
| NULL)) { | |
| /* Skip the range without csum for data reloc inode */ | |
| btrfs_clear_extent_bit(&inode->io_tree, file_offset, end, | |
| EXTENT_NODATASUM, NULL); | |
| return true; | |
| } | |
| csum_expected = bbio->csum + (bio_offset >> fs_info->sectorsize_bits) * | |
| fs_info->csum_size; | |
| btrfs_calculate_block_csum_pages(fs_info, paddrs, csum); | |
| if (unlikely(memcmp(csum, csum_expected, fs_info->csum_size) != 0)) | |
| goto zeroit; | |
| return true; | |
| zeroit: | |
| btrfs_print_data_csum_error(inode, file_offset, csum, csum_expected, | |
| bbio->mirror_num); | |
| if (dev) | |
| btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_CORRUPTION_ERRS); | |
| for (int i = 0; i < nr_steps; i++) | |
| memzero_page(phys_to_page(paddrs[i]), offset_in_page(paddrs[i]), step); | |
| return false; | |
| } | |
| /* | |
| * Perform a delayed iput on @inode. | |
| * | |
| * @inode: The inode we want to perform iput on | |
| * | |
| * This function uses the generic vfs_inode::i_count to track whether we should | |
| * just decrement it (in case it's > 1) or if this is the last iput then link | |
| * the inode to the delayed iput machinery. Delayed iputs are processed at | |
| * transaction commit time/superblock commit/cleaner kthread. | |
| */ | |
| void btrfs_add_delayed_iput(struct btrfs_inode *inode) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| unsigned long flags; | |
| if (atomic_add_unless(&inode->vfs_inode.i_count, -1, 1)) | |
| return; | |
| WARN_ON_ONCE(test_bit(BTRFS_FS_STATE_NO_DELAYED_IPUT, &fs_info->fs_state)); | |
| atomic_inc(&fs_info->nr_delayed_iputs); | |
| /* | |
| * Need to be irq safe here because we can be called from either an irq | |
| * context (see bio.c and btrfs_put_ordered_extent()) or a non-irq | |
| * context. | |
| */ | |
| spin_lock_irqsave(&fs_info->delayed_iput_lock, flags); | |
| ASSERT(list_empty(&inode->delayed_iput)); | |
| list_add_tail(&inode->delayed_iput, &fs_info->delayed_iputs); | |
| spin_unlock_irqrestore(&fs_info->delayed_iput_lock, flags); | |
| if (!test_bit(BTRFS_FS_CLEANER_RUNNING, &fs_info->flags)) | |
| wake_up_process(fs_info->cleaner_kthread); | |
| } | |
| static void run_delayed_iput_locked(struct btrfs_fs_info *fs_info, | |
| struct btrfs_inode *inode) | |
| { | |
| list_del_init(&inode->delayed_iput); | |
| spin_unlock_irq(&fs_info->delayed_iput_lock); | |
| iput(&inode->vfs_inode); | |
| if (atomic_dec_and_test(&fs_info->nr_delayed_iputs)) | |
| wake_up(&fs_info->delayed_iputs_wait); | |
| spin_lock_irq(&fs_info->delayed_iput_lock); | |
| } | |
| static void btrfs_run_delayed_iput(struct btrfs_fs_info *fs_info, | |
| struct btrfs_inode *inode) | |
| { | |
| if (!list_empty(&inode->delayed_iput)) { | |
| spin_lock_irq(&fs_info->delayed_iput_lock); | |
| if (!list_empty(&inode->delayed_iput)) | |
| run_delayed_iput_locked(fs_info, inode); | |
| spin_unlock_irq(&fs_info->delayed_iput_lock); | |
| } | |
| } | |
| void btrfs_run_delayed_iputs(struct btrfs_fs_info *fs_info) | |
| { | |
| /* | |
| * btrfs_put_ordered_extent() can run in irq context (see bio.c), which | |
| * calls btrfs_add_delayed_iput() and that needs to lock | |
| * fs_info->delayed_iput_lock. So we need to disable irqs here to | |
| * prevent a deadlock. | |
| */ | |
| spin_lock_irq(&fs_info->delayed_iput_lock); | |
| while (!list_empty(&fs_info->delayed_iputs)) { | |
| struct btrfs_inode *inode; | |
| inode = list_first_entry(&fs_info->delayed_iputs, | |
| struct btrfs_inode, delayed_iput); | |
| run_delayed_iput_locked(fs_info, inode); | |
| if (need_resched()) { | |
| spin_unlock_irq(&fs_info->delayed_iput_lock); | |
| cond_resched(); | |
| spin_lock_irq(&fs_info->delayed_iput_lock); | |
| } | |
| } | |
| spin_unlock_irq(&fs_info->delayed_iput_lock); | |
| } | |
| /* | |
| * Wait for flushing all delayed iputs | |
| * | |
| * @fs_info: the filesystem | |
| * | |
| * This will wait on any delayed iputs that are currently running with KILLABLE | |
| * set. Once they are all done running we will return, unless we are killed in | |
| * which case we return EINTR. This helps in user operations like fallocate etc | |
| * that might get blocked on the iputs. | |
| * | |
| * Return EINTR if we were killed, 0 if nothing's pending | |
| */ | |
| int btrfs_wait_on_delayed_iputs(struct btrfs_fs_info *fs_info) | |
| { | |
| int ret = wait_event_killable(fs_info->delayed_iputs_wait, | |
| atomic_read(&fs_info->nr_delayed_iputs) == 0); | |
| if (ret) | |
| return -EINTR; | |
| return 0; | |
| } | |
| /* | |
| * This creates an orphan entry for the given inode in case something goes wrong | |
| * in the middle of an unlink. | |
| */ | |
| int btrfs_orphan_add(struct btrfs_trans_handle *trans, | |
| struct btrfs_inode *inode) | |
| { | |
| int ret; | |
| ret = btrfs_insert_orphan_item(trans, inode->root, btrfs_ino(inode)); | |
| if (unlikely(ret && ret != -EEXIST)) { | |
| btrfs_abort_transaction(trans, ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * We have done the delete so we can go ahead and remove the orphan item for | |
| * this particular inode. | |
| */ | |
| static int btrfs_orphan_del(struct btrfs_trans_handle *trans, | |
| struct btrfs_inode *inode) | |
| { | |
| return btrfs_del_orphan_item(trans, inode->root, btrfs_ino(inode)); | |
| } | |
| /* | |
| * this cleans up any orphans that may be left on the list from the last use | |
| * of this root. | |
| */ | |
| int btrfs_orphan_cleanup(struct btrfs_root *root) | |
| { | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| BTRFS_PATH_AUTO_FREE(path); | |
| struct extent_buffer *leaf; | |
| struct btrfs_key key, found_key; | |
| struct btrfs_trans_handle *trans; | |
| u64 last_objectid = 0; | |
| int ret = 0, nr_unlink = 0; | |
| if (test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP, &root->state)) | |
| return 0; | |
| path = btrfs_alloc_path(); | |
| if (!path) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| path->reada = READA_BACK; | |
| key.objectid = BTRFS_ORPHAN_OBJECTID; | |
| key.type = BTRFS_ORPHAN_ITEM_KEY; | |
| key.offset = (u64)-1; | |
| while (1) { | |
| struct btrfs_inode *inode; | |
| ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); | |
| if (ret < 0) | |
| goto out; | |
| /* | |
| * if ret == 0 means we found what we were searching for, which | |
| * is weird, but possible, so only screw with path if we didn't | |
| * find the key and see if we have stuff that matches | |
| */ | |
| if (ret > 0) { | |
| ret = 0; | |
| if (path->slots[0] == 0) | |
| break; | |
| path->slots[0]--; | |
| } | |
| /* pull out the item */ | |
| leaf = path->nodes[0]; | |
| btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]); | |
| /* make sure the item matches what we want */ | |
| if (found_key.objectid != BTRFS_ORPHAN_OBJECTID) | |
| break; | |
| if (found_key.type != BTRFS_ORPHAN_ITEM_KEY) | |
| break; | |
| /* release the path since we're done with it */ | |
| btrfs_release_path(path); | |
| /* | |
| * this is where we are basically btrfs_lookup, without the | |
| * crossing root thing. we store the inode number in the | |
| * offset of the orphan item. | |
| */ | |
| if (found_key.offset == last_objectid) { | |
| /* | |
| * We found the same inode as before. This means we were | |
| * not able to remove its items via eviction triggered | |
| * by an iput(). A transaction abort may have happened, | |
| * due to -ENOSPC for example, so try to grab the error | |
| * that lead to a transaction abort, if any. | |
| */ | |
| btrfs_err(fs_info, | |
| "Error removing orphan entry, stopping orphan cleanup"); | |
| ret = BTRFS_FS_ERROR(fs_info) ?: -EINVAL; | |
| goto out; | |
| } | |
| last_objectid = found_key.offset; | |
| found_key.objectid = found_key.offset; | |
| found_key.type = BTRFS_INODE_ITEM_KEY; | |
| found_key.offset = 0; | |
| inode = btrfs_iget(last_objectid, root); | |
| if (IS_ERR(inode)) { | |
| ret = PTR_ERR(inode); | |
| inode = NULL; | |
| if (ret != -ENOENT) | |
| goto out; | |
| } | |
| if (!inode && root == fs_info->tree_root) { | |
| struct btrfs_root *dead_root; | |
| bool is_dead_root = false; | |
| /* | |
| * This is an orphan in the tree root. Currently these | |
| * could come from 2 sources: | |
| * a) a root (snapshot/subvolume) deletion in progress | |
| * b) a free space cache inode | |
| * We need to distinguish those two, as the orphan item | |
| * for a root must not get deleted before the deletion | |
| * of the snapshot/subvolume's tree completes. | |
| * | |
| * btrfs_find_orphan_roots() ran before us, which has | |
| * found all deleted roots and loaded them into | |
| * fs_info->fs_roots_radix. So here we can find if an | |
| * orphan item corresponds to a deleted root by looking | |
| * up the root from that radix tree. | |
| */ | |
| spin_lock(&fs_info->fs_roots_radix_lock); | |
| dead_root = radix_tree_lookup(&fs_info->fs_roots_radix, | |
| (unsigned long)found_key.objectid); | |
| if (dead_root && btrfs_root_refs(&dead_root->root_item) == 0) | |
| is_dead_root = true; | |
| spin_unlock(&fs_info->fs_roots_radix_lock); | |
| if (is_dead_root) { | |
| /* prevent this orphan from being found again */ | |
| key.offset = found_key.objectid - 1; | |
| continue; | |
| } | |
| } | |
| /* | |
| * If we have an inode with links, there are a couple of | |
| * possibilities: | |
| * | |
| * 1. We were halfway through creating fsverity metadata for the | |
| * file. In that case, the orphan item represents incomplete | |
| * fsverity metadata which must be cleaned up with | |
| * btrfs_drop_verity_items and deleting the orphan item. | |
| * 2. Old kernels (before v3.12) used to create an | |
| * orphan item for truncate indicating that there were possibly | |
| * extent items past i_size that needed to be deleted. In v3.12, | |
| * truncate was changed to update i_size in sync with the extent | |
| * items, but the (useless) orphan item was still created. Since | |
| * v4.18, we don't create the orphan item for truncate at all. | |
| * | |
| * So, this item could mean that we need to do a truncate, but | |
| * only if this filesystem was last used on a pre-v3.12 kernel | |
| * and was not cleanly unmounted. The odds of that are quite | |
| * slim, and it's a pain to do the truncate now, so just delete | |
| * the orphan item. | |
| * | |
| * It's also possible that this orphan item was supposed to be | |
| * deleted but wasn't. The inode number may have been reused, | |
| * but either way, we can delete the orphan item. | |
| */ | |
| if (!inode || inode->vfs_inode.i_nlink) { | |
| if (inode) { | |
| ret = btrfs_drop_verity_items(inode); | |
| iput(&inode->vfs_inode); | |
| inode = NULL; | |
| if (ret) | |
| goto out; | |
| } | |
| /* Only deletes the orphan. */ | |
| trans = btrfs_start_transaction_fallback_global_rsv(root, 1); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| goto out; | |
| } | |
| btrfs_debug(fs_info, "auto deleting %Lu", | |
| found_key.objectid); | |
| ret = btrfs_del_orphan_item(trans, root, | |
| found_key.objectid); | |
| btrfs_end_transaction(trans); | |
| if (ret) | |
| goto out; | |
| continue; | |
| } | |
| nr_unlink++; | |
| /* this will do delete_inode and everything for us */ | |
| iput(&inode->vfs_inode); | |
| } | |
| /* release the path since we're done with it */ | |
| btrfs_release_path(path); | |
| if (test_bit(BTRFS_ROOT_ORPHAN_ITEM_INSERTED, &root->state)) { | |
| trans = btrfs_join_transaction(root); | |
| if (!IS_ERR(trans)) | |
| btrfs_end_transaction(trans); | |
| } | |
| if (nr_unlink) | |
| btrfs_debug(fs_info, "unlinked %d orphans", nr_unlink); | |
| out: | |
| if (ret) | |
| btrfs_err(fs_info, "could not do orphan cleanup %pe", ERR_PTR(ret)); | |
| return ret; | |
| } | |
| /* | |
| * Look ahead in the leaf for xattrs. If we don't find any then we know there | |
| * can't be any ACLs. | |
| * | |
| * @leaf: the eb leaf where to search | |
| * @slot: the slot the inode is in | |
| * @objectid: the objectid of the inode | |
| * | |
| * Return true if there is xattr/ACL, false otherwise. | |
| */ | |
| static noinline bool acls_after_inode_item(struct extent_buffer *leaf, | |
| int slot, u64 objectid, | |
| int *first_xattr_slot) | |
| { | |
| u32 nritems = btrfs_header_nritems(leaf); | |
| struct btrfs_key found_key; | |
| static u64 xattr_access = 0; | |
| static u64 xattr_default = 0; | |
| int scanned = 0; | |
| if (!xattr_access) { | |
| xattr_access = btrfs_name_hash(XATTR_NAME_POSIX_ACL_ACCESS, | |
| strlen(XATTR_NAME_POSIX_ACL_ACCESS)); | |
| xattr_default = btrfs_name_hash(XATTR_NAME_POSIX_ACL_DEFAULT, | |
| strlen(XATTR_NAME_POSIX_ACL_DEFAULT)); | |
| } | |
| slot++; | |
| *first_xattr_slot = -1; | |
| while (slot < nritems) { | |
| btrfs_item_key_to_cpu(leaf, &found_key, slot); | |
| /* We found a different objectid, there must be no ACLs. */ | |
| if (found_key.objectid != objectid) | |
| return false; | |
| /* We found an xattr, assume we've got an ACL. */ | |
| if (found_key.type == BTRFS_XATTR_ITEM_KEY) { | |
| if (*first_xattr_slot == -1) | |
| *first_xattr_slot = slot; | |
| if (found_key.offset == xattr_access || | |
| found_key.offset == xattr_default) | |
| return true; | |
| } | |
| /* | |
| * We found a key greater than an xattr key, there can't be any | |
| * ACLs later on. | |
| */ | |
| if (found_key.type > BTRFS_XATTR_ITEM_KEY) | |
| return false; | |
| slot++; | |
| scanned++; | |
| /* | |
| * The item order goes like: | |
| * - inode | |
| * - inode backrefs | |
| * - xattrs | |
| * - extents, | |
| * | |
| * so if there are lots of hard links to an inode there can be | |
| * a lot of backrefs. Don't waste time searching too hard, | |
| * this is just an optimization. | |
| */ | |
| if (scanned >= 8) | |
| break; | |
| } | |
| /* | |
| * We hit the end of the leaf before we found an xattr or something | |
| * larger than an xattr. We have to assume the inode has ACLs. | |
| */ | |
| if (*first_xattr_slot == -1) | |
| *first_xattr_slot = slot; | |
| return true; | |
| } | |
| static int btrfs_init_file_extent_tree(struct btrfs_inode *inode) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| if (WARN_ON_ONCE(inode->file_extent_tree)) | |
| return 0; | |
| if (btrfs_fs_incompat(fs_info, NO_HOLES)) | |
| return 0; | |
| if (!S_ISREG(inode->vfs_inode.i_mode)) | |
| return 0; | |
| if (btrfs_is_free_space_inode(inode)) | |
| return 0; | |
| inode->file_extent_tree = kmalloc_obj(struct extent_io_tree); | |
| if (!inode->file_extent_tree) | |
| return -ENOMEM; | |
| btrfs_extent_io_tree_init(fs_info, inode->file_extent_tree, | |
| IO_TREE_INODE_FILE_EXTENT); | |
| /* Lockdep class is set only for the file extent tree. */ | |
| lockdep_set_class(&inode->file_extent_tree->lock, &file_extent_tree_class); | |
| return 0; | |
| } | |
| static int btrfs_add_inode_to_root(struct btrfs_inode *inode, bool prealloc) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_inode *existing; | |
| const u64 ino = btrfs_ino(inode); | |
| int ret; | |
| if (inode_unhashed(&inode->vfs_inode)) | |
| return 0; | |
| if (prealloc) { | |
| ret = xa_reserve(&root->inodes, ino, GFP_NOFS); | |
| if (ret) | |
| return ret; | |
| } | |
| existing = xa_store(&root->inodes, ino, inode, GFP_ATOMIC); | |
| if (xa_is_err(existing)) { | |
| ret = xa_err(existing); | |
| ASSERT(ret != -EINVAL); | |
| ASSERT(ret != -ENOMEM); | |
| return ret; | |
| } else if (existing) { | |
| WARN_ON(!(inode_state_read_once(&existing->vfs_inode) & (I_WILL_FREE | I_FREEING))); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Read a locked inode from the btree into the in-memory inode and add it to | |
| * its root list/tree. | |
| * | |
| * On failure clean up the inode. | |
| */ | |
| static int btrfs_read_locked_inode(struct btrfs_inode *inode, struct btrfs_path *path) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct extent_buffer *leaf; | |
| struct btrfs_inode_item *inode_item; | |
| struct inode *vfs_inode = &inode->vfs_inode; | |
| struct btrfs_key location; | |
| unsigned long ptr; | |
| int maybe_acls; | |
| u32 rdev; | |
| int ret; | |
| bool filled = false; | |
| int first_xattr_slot; | |
| ret = btrfs_fill_inode(inode, &rdev); | |
| if (!ret) | |
| filled = true; | |
| ASSERT(path); | |
| btrfs_get_inode_key(inode, &location); | |
| ret = btrfs_lookup_inode(NULL, root, path, &location, 0); | |
| if (ret) { | |
| /* | |
| * ret > 0 can come from btrfs_search_slot called by | |
| * btrfs_lookup_inode(), this means the inode was not found. | |
| */ | |
| if (ret > 0) | |
| ret = -ENOENT; | |
| goto out; | |
| } | |
| leaf = path->nodes[0]; | |
| if (filled) | |
| goto cache_index; | |
| inode_item = btrfs_item_ptr(leaf, path->slots[0], | |
| struct btrfs_inode_item); | |
| vfs_inode->i_mode = btrfs_inode_mode(leaf, inode_item); | |
| set_nlink(vfs_inode, btrfs_inode_nlink(leaf, inode_item)); | |
| i_uid_write(vfs_inode, btrfs_inode_uid(leaf, inode_item)); | |
| i_gid_write(vfs_inode, btrfs_inode_gid(leaf, inode_item)); | |
| btrfs_i_size_write(inode, btrfs_inode_size(leaf, inode_item)); | |
| inode_set_atime(vfs_inode, btrfs_timespec_sec(leaf, &inode_item->atime), | |
| btrfs_timespec_nsec(leaf, &inode_item->atime)); | |
| inode_set_mtime(vfs_inode, btrfs_timespec_sec(leaf, &inode_item->mtime), | |
| btrfs_timespec_nsec(leaf, &inode_item->mtime)); | |
| inode_set_ctime(vfs_inode, btrfs_timespec_sec(leaf, &inode_item->ctime), | |
| btrfs_timespec_nsec(leaf, &inode_item->ctime)); | |
| inode->i_otime_sec = btrfs_timespec_sec(leaf, &inode_item->otime); | |
| inode->i_otime_nsec = btrfs_timespec_nsec(leaf, &inode_item->otime); | |
| inode_set_bytes(vfs_inode, btrfs_inode_nbytes(leaf, inode_item)); | |
| inode->generation = btrfs_inode_generation(leaf, inode_item); | |
| inode->last_trans = btrfs_inode_transid(leaf, inode_item); | |
| inode_set_iversion_queried(vfs_inode, btrfs_inode_sequence(leaf, inode_item)); | |
| vfs_inode->i_generation = inode->generation; | |
| vfs_inode->i_rdev = 0; | |
| rdev = btrfs_inode_rdev(leaf, inode_item); | |
| if (S_ISDIR(vfs_inode->i_mode)) | |
| inode->index_cnt = (u64)-1; | |
| btrfs_inode_split_flags(btrfs_inode_flags(leaf, inode_item), | |
| &inode->flags, &inode->ro_flags); | |
| cache_index: | |
| btrfs_update_inode_mapping_flags(inode); | |
| btrfs_set_inode_mapping_order(inode); | |
| /* | |
| * If we were modified in the current generation and evicted from memory | |
| * and then re-read we need to do a full sync since we don't have any | |
| * idea about which extents were modified before we were evicted from | |
| * cache. | |
| * | |
| * This is required for both inode re-read from disk and delayed inode | |
| * in the delayed_nodes xarray. | |
| */ | |
| if (inode->last_trans == btrfs_get_fs_generation(fs_info)) | |
| set_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &inode->runtime_flags); | |
| /* | |
| * We don't persist the id of the transaction where an unlink operation | |
| * against the inode was last made. So here we assume the inode might | |
| * have been evicted, and therefore the exact value of last_unlink_trans | |
| * lost, and set it to last_trans to avoid metadata inconsistencies | |
| * between the inode and its parent if the inode is fsync'ed and the log | |
| * replayed. For example, in the scenario: | |
| * | |
| * touch mydir/foo | |
| * ln mydir/foo mydir/bar | |
| * sync | |
| * unlink mydir/bar | |
| * echo 2 > /proc/sys/vm/drop_caches # evicts inode | |
| * xfs_io -c fsync mydir/foo | |
| * <power failure> | |
| * mount fs, triggers fsync log replay | |
| * | |
| * We must make sure that when we fsync our inode foo we also log its | |
| * parent inode, otherwise after log replay the parent still has the | |
| * dentry with the "bar" name but our inode foo has a link count of 1 | |
| * and doesn't have an inode ref with the name "bar" anymore. | |
| * | |
| * Setting last_unlink_trans to last_trans is a pessimistic approach, | |
| * but it guarantees correctness at the expense of occasional full | |
| * transaction commits on fsync if our inode is a directory, or if our | |
| * inode is not a directory, logging its parent unnecessarily. | |
| */ | |
| inode->last_unlink_trans = inode->last_trans; | |
| /* | |
| * Same logic as for last_unlink_trans. We don't persist the generation | |
| * of the last transaction where this inode was used for a reflink | |
| * operation, so after eviction and reloading the inode we must be | |
| * pessimistic and assume the last transaction that modified the inode. | |
| */ | |
| inode->last_reflink_trans = inode->last_trans; | |
| path->slots[0]++; | |
| if (vfs_inode->i_nlink != 1 || | |
| path->slots[0] >= btrfs_header_nritems(leaf)) | |
| goto cache_acl; | |
| btrfs_item_key_to_cpu(leaf, &location, path->slots[0]); | |
| if (location.objectid != btrfs_ino(inode)) | |
| goto cache_acl; | |
| ptr = btrfs_item_ptr_offset(leaf, path->slots[0]); | |
| if (location.type == BTRFS_INODE_REF_KEY) { | |
| struct btrfs_inode_ref *ref; | |
| ref = (struct btrfs_inode_ref *)ptr; | |
| inode->dir_index = btrfs_inode_ref_index(leaf, ref); | |
| } else if (location.type == BTRFS_INODE_EXTREF_KEY) { | |
| struct btrfs_inode_extref *extref; | |
| extref = (struct btrfs_inode_extref *)ptr; | |
| inode->dir_index = btrfs_inode_extref_index(leaf, extref); | |
| } | |
| cache_acl: | |
| /* | |
| * try to precache a NULL acl entry for files that don't have | |
| * any xattrs or acls | |
| */ | |
| maybe_acls = acls_after_inode_item(leaf, path->slots[0], | |
| btrfs_ino(inode), &first_xattr_slot); | |
| if (first_xattr_slot != -1) { | |
| path->slots[0] = first_xattr_slot; | |
| ret = btrfs_load_inode_props(inode, path); | |
| if (ret) | |
| btrfs_err(fs_info, | |
| "error loading props for ino %llu (root %llu): %pe", | |
| btrfs_ino(inode), btrfs_root_id(root), ERR_PTR(ret)); | |
| } | |
| /* | |
| * We don't need the path anymore, so release it to avoid holding a read | |
| * lock on a leaf while calling btrfs_init_file_extent_tree(), which can | |
| * allocate memory that triggers reclaim (GFP_KERNEL) and cause a locking | |
| * dependency. | |
| */ | |
| btrfs_release_path(path); | |
| ret = btrfs_init_file_extent_tree(inode); | |
| if (ret) | |
| goto out; | |
| btrfs_inode_set_file_extent_range(inode, 0, | |
| round_up(i_size_read(vfs_inode), fs_info->sectorsize)); | |
| if (!maybe_acls) | |
| cache_no_acl(vfs_inode); | |
| switch (vfs_inode->i_mode & S_IFMT) { | |
| case S_IFREG: | |
| vfs_inode->i_mapping->a_ops = &btrfs_aops; | |
| vfs_inode->i_fop = &btrfs_file_operations; | |
| vfs_inode->i_op = &btrfs_file_inode_operations; | |
| break; | |
| case S_IFDIR: | |
| vfs_inode->i_fop = &btrfs_dir_file_operations; | |
| vfs_inode->i_op = &btrfs_dir_inode_operations; | |
| break; | |
| case S_IFLNK: | |
| vfs_inode->i_op = &btrfs_symlink_inode_operations; | |
| inode_nohighmem(vfs_inode); | |
| vfs_inode->i_mapping->a_ops = &btrfs_aops; | |
| break; | |
| default: | |
| vfs_inode->i_op = &btrfs_special_inode_operations; | |
| init_special_inode(vfs_inode, vfs_inode->i_mode, rdev); | |
| break; | |
| } | |
| btrfs_sync_inode_flags_to_i_flags(inode); | |
| ret = btrfs_add_inode_to_root(inode, true); | |
| if (ret) | |
| goto out; | |
| return 0; | |
| out: | |
| /* | |
| * We may have a read locked leaf and iget_failed() triggers inode | |
| * eviction which needs to release the delayed inode and that needs | |
| * to lock the delayed inode's mutex. This can cause a ABBA deadlock | |
| * with a task running delayed items, as that require first locking | |
| * the delayed inode's mutex and then modifying its subvolume btree. | |
| * So release the path before iget_failed(). | |
| */ | |
| btrfs_release_path(path); | |
| iget_failed(vfs_inode); | |
| return ret; | |
| } | |
| /* | |
| * given a leaf and an inode, copy the inode fields into the leaf | |
| */ | |
| static void fill_inode_item(struct btrfs_trans_handle *trans, | |
| struct extent_buffer *leaf, | |
| struct btrfs_inode_item *item, | |
| struct inode *inode) | |
| { | |
| u64 flags; | |
| btrfs_set_inode_uid(leaf, item, i_uid_read(inode)); | |
| btrfs_set_inode_gid(leaf, item, i_gid_read(inode)); | |
| btrfs_set_inode_size(leaf, item, BTRFS_I(inode)->disk_i_size); | |
| btrfs_set_inode_mode(leaf, item, inode->i_mode); | |
| btrfs_set_inode_nlink(leaf, item, inode->i_nlink); | |
| btrfs_set_timespec_sec(leaf, &item->atime, inode_get_atime_sec(inode)); | |
| btrfs_set_timespec_nsec(leaf, &item->atime, inode_get_atime_nsec(inode)); | |
| btrfs_set_timespec_sec(leaf, &item->mtime, inode_get_mtime_sec(inode)); | |
| btrfs_set_timespec_nsec(leaf, &item->mtime, inode_get_mtime_nsec(inode)); | |
| btrfs_set_timespec_sec(leaf, &item->ctime, inode_get_ctime_sec(inode)); | |
| btrfs_set_timespec_nsec(leaf, &item->ctime, inode_get_ctime_nsec(inode)); | |
| btrfs_set_timespec_sec(leaf, &item->otime, BTRFS_I(inode)->i_otime_sec); | |
| btrfs_set_timespec_nsec(leaf, &item->otime, BTRFS_I(inode)->i_otime_nsec); | |
| btrfs_set_inode_nbytes(leaf, item, inode_get_bytes(inode)); | |
| btrfs_set_inode_generation(leaf, item, BTRFS_I(inode)->generation); | |
| btrfs_set_inode_sequence(leaf, item, inode_peek_iversion(inode)); | |
| btrfs_set_inode_transid(leaf, item, trans->transid); | |
| btrfs_set_inode_rdev(leaf, item, inode->i_rdev); | |
| flags = btrfs_inode_combine_flags(BTRFS_I(inode)->flags, | |
| BTRFS_I(inode)->ro_flags); | |
| btrfs_set_inode_flags(leaf, item, flags); | |
| btrfs_set_inode_block_group(leaf, item, 0); | |
| } | |
| /* | |
| * copy everything in the in-memory inode into the btree. | |
| */ | |
| static noinline int btrfs_update_inode_item(struct btrfs_trans_handle *trans, | |
| struct btrfs_inode *inode) | |
| { | |
| struct btrfs_inode_item *inode_item; | |
| BTRFS_PATH_AUTO_FREE(path); | |
| struct extent_buffer *leaf; | |
| struct btrfs_key key; | |
| int ret; | |
| path = btrfs_alloc_path(); | |
| if (!path) | |
| return -ENOMEM; | |
| btrfs_get_inode_key(inode, &key); | |
| ret = btrfs_lookup_inode(trans, inode->root, path, &key, 1); | |
| if (ret) { | |
| if (ret > 0) | |
| ret = -ENOENT; | |
| return ret; | |
| } | |
| leaf = path->nodes[0]; | |
| inode_item = btrfs_item_ptr(leaf, path->slots[0], | |
| struct btrfs_inode_item); | |
| fill_inode_item(trans, leaf, inode_item, &inode->vfs_inode); | |
| btrfs_set_inode_last_trans(trans, inode); | |
| return 0; | |
| } | |
| /* | |
| * copy everything in the in-memory inode into the btree. | |
| */ | |
| int btrfs_update_inode(struct btrfs_trans_handle *trans, | |
| struct btrfs_inode *inode) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| int ret; | |
| /* | |
| * If the inode is a free space inode, we can deadlock during commit | |
| * if we put it into the delayed code. | |
| * | |
| * The data relocation inode should also be directly updated | |
| * without delay | |
| */ | |
| if (!btrfs_is_free_space_inode(inode) | |
| && !btrfs_is_data_reloc_root(root) | |
| && !test_bit(BTRFS_FS_LOG_RECOVERING, &fs_info->flags)) { | |
| btrfs_update_root_times(trans, root); | |
| ret = btrfs_delayed_update_inode(trans, inode); | |
| if (!ret) | |
| btrfs_set_inode_last_trans(trans, inode); | |
| return ret; | |
| } | |
| return btrfs_update_inode_item(trans, inode); | |
| } | |
| int btrfs_update_inode_fallback(struct btrfs_trans_handle *trans, | |
| struct btrfs_inode *inode) | |
| { | |
| int ret; | |
| ret = btrfs_update_inode(trans, inode); | |
| if (ret == -ENOSPC) | |
| return btrfs_update_inode_item(trans, inode); | |
| return ret; | |
| } | |
| static void update_time_after_link_or_unlink(struct btrfs_inode *dir) | |
| { | |
| struct timespec64 now; | |
| /* | |
| * If we are replaying a log tree, we do not want to update the mtime | |
| * and ctime of the parent directory with the current time, since the | |
| * log replay procedure is responsible for setting them to their correct | |
| * values (the ones it had when the fsync was done). | |
| */ | |
| if (test_bit(BTRFS_FS_LOG_RECOVERING, &dir->root->fs_info->flags)) | |
| return; | |
| now = inode_set_ctime_current(&dir->vfs_inode); | |
| inode_set_mtime_to_ts(&dir->vfs_inode, now); | |
| } | |
| /* | |
| * unlink helper that gets used here in inode.c and in the tree logging | |
| * recovery code. It remove a link in a directory with a given name, and | |
| * also drops the back refs in the inode to the directory | |
| */ | |
| static int __btrfs_unlink_inode(struct btrfs_trans_handle *trans, | |
| struct btrfs_inode *dir, | |
| struct btrfs_inode *inode, | |
| const struct fscrypt_str *name, | |
| struct btrfs_rename_ctx *rename_ctx) | |
| { | |
| struct btrfs_root *root = dir->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct btrfs_path *path; | |
| int ret = 0; | |
| struct btrfs_dir_item *di; | |
| u64 index; | |
| u64 ino = btrfs_ino(inode); | |
| u64 dir_ino = btrfs_ino(dir); | |
| path = btrfs_alloc_path(); | |
| if (!path) | |
| return -ENOMEM; | |
| di = btrfs_lookup_dir_item(trans, root, path, dir_ino, name, -1); | |
| if (IS_ERR_OR_NULL(di)) { | |
| btrfs_free_path(path); | |
| return di ? PTR_ERR(di) : -ENOENT; | |
| } | |
| ret = btrfs_delete_one_dir_name(trans, root, path, di); | |
| /* | |
| * Down the call chains below we'll also need to allocate a path, so no | |
| * need to hold on to this one for longer than necessary. | |
| */ | |
| btrfs_free_path(path); | |
| if (ret) | |
| return ret; | |
| /* | |
| * If we don't have dir index, we have to get it by looking up | |
| * the inode ref, since we get the inode ref, remove it directly, | |
| * it is unnecessary to do delayed deletion. | |
| * | |
| * But if we have dir index, needn't search inode ref to get it. | |
| * Since the inode ref is close to the inode item, it is better | |
| * that we delay to delete it, and just do this deletion when | |
| * we update the inode item. | |
| */ | |
| if (inode->dir_index) { | |
| ret = btrfs_delayed_delete_inode_ref(inode); | |
| if (!ret) { | |
| index = inode->dir_index; | |
| goto skip_backref; | |
| } | |
| } | |
| ret = btrfs_del_inode_ref(trans, root, name, ino, dir_ino, &index); | |
| if (unlikely(ret)) { | |
| btrfs_crit(fs_info, | |
| "failed to delete reference to %.*s, root %llu inode %llu parent %llu", | |
| name->len, name->name, btrfs_root_id(root), ino, dir_ino); | |
| btrfs_abort_transaction(trans, ret); | |
| return ret; | |
| } | |
| skip_backref: | |
| if (rename_ctx) | |
| rename_ctx->index = index; | |
| ret = btrfs_delete_delayed_dir_index(trans, dir, index); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| return ret; | |
| } | |
| /* | |
| * If we are in a rename context, we don't need to update anything in the | |
| * log. That will be done later during the rename by btrfs_log_new_name(). | |
| * Besides that, doing it here would only cause extra unnecessary btree | |
| * operations on the log tree, increasing latency for applications. | |
| */ | |
| if (!rename_ctx) { | |
| btrfs_del_inode_ref_in_log(trans, name, inode, dir); | |
| btrfs_del_dir_entries_in_log(trans, name, dir, index); | |
| } | |
| /* | |
| * If we have a pending delayed iput we could end up with the final iput | |
| * being run in btrfs-cleaner context. If we have enough of these built | |
| * up we can end up burning a lot of time in btrfs-cleaner without any | |
| * way to throttle the unlinks. Since we're currently holding a ref on | |
| * the inode we can run the delayed iput here without any issues as the | |
| * final iput won't be done until after we drop the ref we're currently | |
| * holding. | |
| */ | |
| btrfs_run_delayed_iput(fs_info, inode); | |
| btrfs_i_size_write(dir, dir->vfs_inode.i_size - name->len * 2); | |
| inode_inc_iversion(&inode->vfs_inode); | |
| inode_set_ctime_current(&inode->vfs_inode); | |
| inode_inc_iversion(&dir->vfs_inode); | |
| update_time_after_link_or_unlink(dir); | |
| return btrfs_update_inode(trans, dir); | |
| } | |
| int btrfs_unlink_inode(struct btrfs_trans_handle *trans, | |
| struct btrfs_inode *dir, struct btrfs_inode *inode, | |
| const struct fscrypt_str *name) | |
| { | |
| int ret; | |
| ret = __btrfs_unlink_inode(trans, dir, inode, name, NULL); | |
| if (!ret) { | |
| drop_nlink(&inode->vfs_inode); | |
| ret = btrfs_update_inode(trans, inode); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * helper to start transaction for unlink and rmdir. | |
| * | |
| * unlink and rmdir are special in btrfs, they do not always free space, so | |
| * if we cannot make our reservations the normal way try and see if there is | |
| * plenty of slack room in the global reserve to migrate, otherwise we cannot | |
| * allow the unlink to occur. | |
| */ | |
| static struct btrfs_trans_handle *__unlink_start_trans(struct btrfs_inode *dir) | |
| { | |
| struct btrfs_root *root = dir->root; | |
| return btrfs_start_transaction_fallback_global_rsv(root, | |
| BTRFS_UNLINK_METADATA_UNITS); | |
| } | |
| static int btrfs_unlink(struct inode *dir, struct dentry *dentry) | |
| { | |
| struct btrfs_trans_handle *trans; | |
| struct inode *inode = d_inode(dentry); | |
| int ret; | |
| struct fscrypt_name fname; | |
| ret = fscrypt_setup_filename(dir, &dentry->d_name, 1, &fname); | |
| if (ret) | |
| return ret; | |
| /* This needs to handle no-key deletions later on */ | |
| trans = __unlink_start_trans(BTRFS_I(dir)); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| goto fscrypt_free; | |
| } | |
| btrfs_record_unlink_dir(trans, BTRFS_I(dir), BTRFS_I(d_inode(dentry)), | |
| false); | |
| ret = btrfs_unlink_inode(trans, BTRFS_I(dir), BTRFS_I(d_inode(dentry)), | |
| &fname.disk_name); | |
| if (ret) | |
| goto end_trans; | |
| if (inode->i_nlink == 0) { | |
| ret = btrfs_orphan_add(trans, BTRFS_I(inode)); | |
| if (ret) | |
| goto end_trans; | |
| } | |
| end_trans: | |
| btrfs_end_transaction(trans); | |
| btrfs_btree_balance_dirty(BTRFS_I(dir)->root->fs_info); | |
| fscrypt_free: | |
| fscrypt_free_filename(&fname); | |
| return ret; | |
| } | |
| static int btrfs_unlink_subvol(struct btrfs_trans_handle *trans, | |
| struct btrfs_inode *dir, struct dentry *dentry) | |
| { | |
| struct btrfs_root *root = dir->root; | |
| struct btrfs_inode *inode = BTRFS_I(d_inode(dentry)); | |
| BTRFS_PATH_AUTO_FREE(path); | |
| struct extent_buffer *leaf; | |
| struct btrfs_dir_item *di; | |
| struct btrfs_key key; | |
| u64 index; | |
| int ret; | |
| u64 objectid; | |
| u64 dir_ino = btrfs_ino(dir); | |
| struct fscrypt_name fname; | |
| ret = fscrypt_setup_filename(&dir->vfs_inode, &dentry->d_name, 1, &fname); | |
| if (ret) | |
| return ret; | |
| /* This needs to handle no-key deletions later on */ | |
| if (btrfs_ino(inode) == BTRFS_FIRST_FREE_OBJECTID) { | |
| objectid = btrfs_root_id(inode->root); | |
| } else if (btrfs_ino(inode) == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID) { | |
| objectid = inode->ref_root_id; | |
| } else { | |
| WARN_ON(1); | |
| fscrypt_free_filename(&fname); | |
| return -EINVAL; | |
| } | |
| path = btrfs_alloc_path(); | |
| if (!path) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| di = btrfs_lookup_dir_item(trans, root, path, dir_ino, | |
| &fname.disk_name, -1); | |
| if (IS_ERR_OR_NULL(di)) { | |
| ret = di ? PTR_ERR(di) : -ENOENT; | |
| goto out; | |
| } | |
| leaf = path->nodes[0]; | |
| btrfs_dir_item_key_to_cpu(leaf, di, &key); | |
| WARN_ON(key.type != BTRFS_ROOT_ITEM_KEY || key.objectid != objectid); | |
| ret = btrfs_delete_one_dir_name(trans, root, path, di); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out; | |
| } | |
| btrfs_release_path(path); | |
| /* | |
| * This is a placeholder inode for a subvolume we didn't have a | |
| * reference to at the time of the snapshot creation. In the meantime | |
| * we could have renamed the real subvol link into our snapshot, so | |
| * depending on btrfs_del_root_ref to return -ENOENT here is incorrect. | |
| * Instead simply lookup the dir_index_item for this entry so we can | |
| * remove it. Otherwise we know we have a ref to the root and we can | |
| * call btrfs_del_root_ref, and it _shouldn't_ fail. | |
| */ | |
| if (btrfs_ino(inode) == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID) { | |
| di = btrfs_search_dir_index_item(root, path, dir_ino, &fname.disk_name); | |
| if (IS_ERR(di)) { | |
| ret = PTR_ERR(di); | |
| btrfs_abort_transaction(trans, ret); | |
| goto out; | |
| } | |
| leaf = path->nodes[0]; | |
| btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); | |
| index = key.offset; | |
| btrfs_release_path(path); | |
| } else { | |
| ret = btrfs_del_root_ref(trans, objectid, | |
| btrfs_root_id(root), dir_ino, | |
| &index, &fname.disk_name); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out; | |
| } | |
| } | |
| ret = btrfs_delete_delayed_dir_index(trans, dir, index); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out; | |
| } | |
| btrfs_i_size_write(dir, dir->vfs_inode.i_size - fname.disk_name.len * 2); | |
| inode_inc_iversion(&dir->vfs_inode); | |
| inode_set_mtime_to_ts(&dir->vfs_inode, inode_set_ctime_current(&dir->vfs_inode)); | |
| ret = btrfs_update_inode_fallback(trans, dir); | |
| if (ret) | |
| btrfs_abort_transaction(trans, ret); | |
| out: | |
| fscrypt_free_filename(&fname); | |
| return ret; | |
| } | |
| /* | |
| * Helper to check if the subvolume references other subvolumes or if it's | |
| * default. | |
| */ | |
| static noinline int may_destroy_subvol(struct btrfs_root *root) | |
| { | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| BTRFS_PATH_AUTO_FREE(path); | |
| struct btrfs_dir_item *di; | |
| struct btrfs_key key; | |
| struct fscrypt_str name = FSTR_INIT("default", 7); | |
| u64 dir_id; | |
| int ret; | |
| path = btrfs_alloc_path(); | |
| if (!path) | |
| return -ENOMEM; | |
| /* Make sure this root isn't set as the default subvol */ | |
| dir_id = btrfs_super_root_dir(fs_info->super_copy); | |
| di = btrfs_lookup_dir_item(NULL, fs_info->tree_root, path, | |
| dir_id, &name, 0); | |
| if (!IS_ERR_OR_NULL(di)) { | |
| btrfs_dir_item_key_to_cpu(path->nodes[0], di, &key); | |
| if (key.objectid == btrfs_root_id(root)) { | |
| ret = -EPERM; | |
| btrfs_err(fs_info, | |
| "deleting default subvolume %llu is not allowed", | |
| key.objectid); | |
| return ret; | |
| } | |
| btrfs_release_path(path); | |
| } | |
| key.objectid = btrfs_root_id(root); | |
| key.type = BTRFS_ROOT_REF_KEY; | |
| key.offset = (u64)-1; | |
| ret = btrfs_search_slot(NULL, fs_info->tree_root, &key, path, 0, 0); | |
| if (ret < 0) | |
| return ret; | |
| if (unlikely(ret == 0)) { | |
| /* | |
| * Key with offset -1 found, there would have to exist a root | |
| * with such id, but this is out of valid range. | |
| */ | |
| return -EUCLEAN; | |
| } | |
| ret = 0; | |
| if (path->slots[0] > 0) { | |
| path->slots[0]--; | |
| btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]); | |
| if (key.objectid == btrfs_root_id(root) && key.type == BTRFS_ROOT_REF_KEY) | |
| ret = -ENOTEMPTY; | |
| } | |
| return ret; | |
| } | |
| /* Delete all dentries for inodes belonging to the root */ | |
| static void btrfs_prune_dentries(struct btrfs_root *root) | |
| { | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct btrfs_inode *inode; | |
| u64 min_ino = 0; | |
| if (!BTRFS_FS_ERROR(fs_info)) | |
| WARN_ON(btrfs_root_refs(&root->root_item) != 0); | |
| inode = btrfs_find_first_inode(root, min_ino); | |
| while (inode) { | |
| if (icount_read_once(&inode->vfs_inode) > 1) | |
| d_prune_aliases(&inode->vfs_inode); | |
| min_ino = btrfs_ino(inode) + 1; | |
| /* | |
| * btrfs_drop_inode() will have it removed from the inode | |
| * cache when its usage count hits zero. | |
| */ | |
| iput(&inode->vfs_inode); | |
| cond_resched(); | |
| inode = btrfs_find_first_inode(root, min_ino); | |
| } | |
| } | |
| int btrfs_delete_subvolume(struct btrfs_inode *dir, struct dentry *dentry) | |
| { | |
| struct btrfs_root *root = dir->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct inode *inode = d_inode(dentry); | |
| struct btrfs_root *dest = BTRFS_I(inode)->root; | |
| struct btrfs_trans_handle *trans; | |
| struct btrfs_block_rsv block_rsv; | |
| u64 root_flags; | |
| u64 qgroup_reserved = 0; | |
| int ret; | |
| down_write(&fs_info->subvol_sem); | |
| /* | |
| * Don't allow to delete a subvolume with send in progress. This is | |
| * inside the inode lock so the error handling that has to drop the bit | |
| * again is not run concurrently. | |
| */ | |
| spin_lock(&dest->root_item_lock); | |
| if (dest->send_in_progress) { | |
| spin_unlock(&dest->root_item_lock); | |
| btrfs_warn(fs_info, | |
| "attempt to delete subvolume %llu during send", | |
| btrfs_root_id(dest)); | |
| ret = -EPERM; | |
| goto out_up_write; | |
| } | |
| if (atomic_read(&dest->nr_swapfiles)) { | |
| spin_unlock(&dest->root_item_lock); | |
| btrfs_warn(fs_info, | |
| "attempt to delete subvolume %llu with active swapfile", | |
| btrfs_root_id(dest)); | |
| ret = -EPERM; | |
| goto out_up_write; | |
| } | |
| root_flags = btrfs_root_flags(&dest->root_item); | |
| btrfs_set_root_flags(&dest->root_item, | |
| root_flags | BTRFS_ROOT_SUBVOL_DEAD); | |
| spin_unlock(&dest->root_item_lock); | |
| ret = may_destroy_subvol(dest); | |
| if (ret) | |
| goto out_undead; | |
| btrfs_init_block_rsv(&block_rsv, BTRFS_BLOCK_RSV_TEMP); | |
| /* | |
| * One for dir inode, | |
| * two for dir entries, | |
| * two for root ref/backref. | |
| */ | |
| ret = btrfs_subvolume_reserve_metadata(root, &block_rsv, 5, true); | |
| if (ret) | |
| goto out_undead; | |
| qgroup_reserved = block_rsv.qgroup_rsv_reserved; | |
| trans = btrfs_start_transaction(root, 0); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| goto out_release; | |
| } | |
| btrfs_qgroup_convert_reserved_meta(root, qgroup_reserved); | |
| qgroup_reserved = 0; | |
| trans->block_rsv = &block_rsv; | |
| trans->bytes_reserved = block_rsv.size; | |
| btrfs_record_snapshot_destroy(trans, dir); | |
| ret = btrfs_unlink_subvol(trans, dir, dentry); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_end_trans; | |
| } | |
| ret = btrfs_record_root_in_trans(trans, dest); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_end_trans; | |
| } | |
| memset(&dest->root_item.drop_progress, 0, | |
| sizeof(dest->root_item.drop_progress)); | |
| btrfs_set_root_drop_level(&dest->root_item, 0); | |
| btrfs_set_root_refs(&dest->root_item, 0); | |
| if (!test_and_set_bit(BTRFS_ROOT_ORPHAN_ITEM_INSERTED, &dest->state)) { | |
| ret = btrfs_insert_orphan_item(trans, | |
| fs_info->tree_root, | |
| btrfs_root_id(dest)); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_end_trans; | |
| } | |
| } | |
| ret = btrfs_uuid_tree_remove(trans, dest->root_item.uuid, | |
| BTRFS_UUID_KEY_SUBVOL, btrfs_root_id(dest)); | |
| if (unlikely(ret && ret != -ENOENT)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_end_trans; | |
| } | |
| if (!btrfs_is_empty_uuid(dest->root_item.received_uuid)) { | |
| ret = btrfs_uuid_tree_remove(trans, | |
| dest->root_item.received_uuid, | |
| BTRFS_UUID_KEY_RECEIVED_SUBVOL, | |
| btrfs_root_id(dest)); | |
| if (unlikely(ret && ret != -ENOENT)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_end_trans; | |
| } | |
| } | |
| free_anon_bdev(dest->anon_dev); | |
| dest->anon_dev = 0; | |
| out_end_trans: | |
| trans->block_rsv = NULL; | |
| trans->bytes_reserved = 0; | |
| ret = btrfs_end_transaction(trans); | |
| inode->i_flags |= S_DEAD; | |
| out_release: | |
| btrfs_block_rsv_release(fs_info, &block_rsv, (u64)-1, NULL); | |
| if (qgroup_reserved) | |
| btrfs_qgroup_free_meta_prealloc(root, qgroup_reserved); | |
| out_undead: | |
| if (ret) { | |
| spin_lock(&dest->root_item_lock); | |
| root_flags = btrfs_root_flags(&dest->root_item); | |
| btrfs_set_root_flags(&dest->root_item, | |
| root_flags & ~BTRFS_ROOT_SUBVOL_DEAD); | |
| spin_unlock(&dest->root_item_lock); | |
| } | |
| out_up_write: | |
| up_write(&fs_info->subvol_sem); | |
| if (!ret) { | |
| d_invalidate(dentry); | |
| btrfs_prune_dentries(dest); | |
| ASSERT(dest->send_in_progress == 0); | |
| } | |
| return ret; | |
| } | |
| static int btrfs_rmdir(struct inode *vfs_dir, struct dentry *dentry) | |
| { | |
| struct btrfs_inode *dir = BTRFS_I(vfs_dir); | |
| struct btrfs_inode *inode = BTRFS_I(d_inode(dentry)); | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| int ret = 0; | |
| struct btrfs_trans_handle *trans; | |
| struct fscrypt_name fname; | |
| if (inode->vfs_inode.i_size > BTRFS_EMPTY_DIR_SIZE) | |
| return -ENOTEMPTY; | |
| if (btrfs_ino(inode) == BTRFS_FIRST_FREE_OBJECTID) { | |
| if (unlikely(btrfs_fs_incompat(fs_info, EXTENT_TREE_V2))) { | |
| btrfs_err(fs_info, | |
| "extent tree v2 doesn't support snapshot deletion yet"); | |
| return -EOPNOTSUPP; | |
| } | |
| return btrfs_delete_subvolume(dir, dentry); | |
| } | |
| ret = fscrypt_setup_filename(vfs_dir, &dentry->d_name, 1, &fname); | |
| if (ret) | |
| return ret; | |
| /* This needs to handle no-key deletions later on */ | |
| trans = __unlink_start_trans(dir); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| goto out_notrans; | |
| } | |
| /* | |
| * Propagate the last_unlink_trans value of the deleted dir to its | |
| * parent directory. This is to prevent an unrecoverable log tree in the | |
| * case we do something like this: | |
| * 1) create dir foo | |
| * 2) create snapshot under dir foo | |
| * 3) delete the snapshot | |
| * 4) rmdir foo | |
| * 5) mkdir foo | |
| * 6) fsync foo or some file inside foo | |
| * | |
| * This is because we can't unlink other roots when replaying the dir | |
| * deletes for directory foo. | |
| */ | |
| if (inode->last_unlink_trans >= trans->transid) | |
| btrfs_record_snapshot_destroy(trans, dir); | |
| if (unlikely(btrfs_ino(inode) == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)) { | |
| ret = btrfs_unlink_subvol(trans, dir, dentry); | |
| goto out; | |
| } | |
| ret = btrfs_orphan_add(trans, inode); | |
| if (ret) | |
| goto out; | |
| btrfs_record_unlink_dir(trans, dir, inode, false); | |
| /* now the directory is empty */ | |
| ret = btrfs_unlink_inode(trans, dir, inode, &fname.disk_name); | |
| if (!ret) | |
| btrfs_i_size_write(inode, 0); | |
| out: | |
| btrfs_end_transaction(trans); | |
| out_notrans: | |
| btrfs_btree_balance_dirty(fs_info); | |
| fscrypt_free_filename(&fname); | |
| return ret; | |
| } | |
| static bool is_inside_block(u64 bytenr, u64 blockstart, u32 blocksize) | |
| { | |
| ASSERT(IS_ALIGNED(blockstart, blocksize), "blockstart=%llu blocksize=%u", | |
| blockstart, blocksize); | |
| if (blockstart <= bytenr && bytenr <= blockstart + blocksize - 1) | |
| return true; | |
| return false; | |
| } | |
| static int truncate_block_zero_beyond_eof(struct btrfs_inode *inode, u64 start) | |
| { | |
| const pgoff_t index = (start >> PAGE_SHIFT); | |
| struct address_space *mapping = inode->vfs_inode.i_mapping; | |
| struct folio *folio; | |
| u64 zero_start; | |
| u64 zero_end; | |
| int ret = 0; | |
| again: | |
| folio = filemap_lock_folio(mapping, index); | |
| /* No folio present. */ | |
| if (IS_ERR(folio)) | |
| return 0; | |
| if (!folio_test_uptodate(folio)) { | |
| ret = btrfs_read_folio(NULL, folio); | |
| folio_lock(folio); | |
| if (folio->mapping != mapping) { | |
| folio_unlock(folio); | |
| folio_put(folio); | |
| goto again; | |
| } | |
| if (unlikely(!folio_test_uptodate(folio))) { | |
| ret = -EIO; | |
| goto out_unlock; | |
| } | |
| } | |
| folio_wait_writeback(folio); | |
| /* | |
| * We do not need to lock extents nor wait for OE, as it's already | |
| * beyond EOF. | |
| */ | |
| zero_start = max_t(u64, folio_pos(folio), start); | |
| zero_end = folio_next_pos(folio); | |
| folio_zero_range(folio, zero_start - folio_pos(folio), | |
| zero_end - zero_start); | |
| out_unlock: | |
| folio_unlock(folio); | |
| folio_put(folio); | |
| return ret; | |
| } | |
| /* | |
| * Handle the truncation of a fs block. | |
| * | |
| * @inode - inode that we're zeroing | |
| * @offset - the file offset of the block to truncate | |
| * The value must be inside [@start, @end], and the function will do | |
| * extra checks if the block that covers @offset needs to be zeroed. | |
| * @start - the start file offset of the range we want to zero | |
| * @end - the end (inclusive) file offset of the range we want to zero. | |
| * | |
| * If the range is not block aligned, read out the folio that covers @offset, | |
| * and if needed zero blocks that are inside the folio and covered by [@start, @end). | |
| * If @start or @end + 1 lands inside a block, that block will be marked dirty | |
| * for writeback. | |
| * | |
| * This is utilized by hole punch, zero range, file expansion. | |
| */ | |
| int btrfs_truncate_block(struct btrfs_inode *inode, u64 offset, u64 start, u64 end) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| struct address_space *mapping = inode->vfs_inode.i_mapping; | |
| struct extent_io_tree *io_tree = &inode->io_tree; | |
| struct btrfs_ordered_extent *ordered; | |
| struct extent_state *cached_state = NULL; | |
| struct extent_changeset *data_reserved = NULL; | |
| bool only_release_metadata = false; | |
| u32 blocksize = fs_info->sectorsize; | |
| pgoff_t index = (offset >> PAGE_SHIFT); | |
| struct folio *folio; | |
| gfp_t mask = btrfs_alloc_write_mask(mapping); | |
| int ret = 0; | |
| const bool in_head_block = is_inside_block(offset, round_down(start, blocksize), | |
| blocksize); | |
| const bool in_tail_block = is_inside_block(offset, round_down(end, blocksize), | |
| blocksize); | |
| bool need_truncate_head = false; | |
| bool need_truncate_tail = false; | |
| u64 zero_start; | |
| u64 zero_end; | |
| u64 block_start; | |
| u64 block_end; | |
| /* @offset should be inside the range. */ | |
| ASSERT(start <= offset && offset <= end, "offset=%llu start=%llu end=%llu", | |
| offset, start, end); | |
| /* The range is aligned at both ends. */ | |
| if (IS_ALIGNED(start, blocksize) && IS_ALIGNED(end + 1, blocksize)) { | |
| /* | |
| * For block size < page size case, we may have polluted blocks | |
| * beyond EOF. So we also need to zero them out. | |
| */ | |
| if (end == (u64)-1 && blocksize < PAGE_SIZE) | |
| ret = truncate_block_zero_beyond_eof(inode, start); | |
| goto out; | |
| } | |
| /* | |
| * @offset may not be inside the head nor tail block. In that case we | |
| * don't need to do anything. | |
| */ | |
| if (!in_head_block && !in_tail_block) | |
| goto out; | |
| /* | |
| * Skip the truncation if the range in the target block is already aligned. | |
| * The seemingly complex check will also handle the same block case. | |
| */ | |
| if (in_head_block && !IS_ALIGNED(start, blocksize)) | |
| need_truncate_head = true; | |
| if (in_tail_block && !IS_ALIGNED(end + 1, blocksize)) | |
| need_truncate_tail = true; | |
| if (!need_truncate_head && !need_truncate_tail) | |
| goto out; | |
| block_start = round_down(offset, blocksize); | |
| block_end = block_start + blocksize - 1; | |
| ret = btrfs_check_data_free_space(inode, &data_reserved, block_start, | |
| blocksize, false); | |
| if (ret < 0) { | |
| size_t write_bytes = blocksize; | |
| if (btrfs_check_nocow_lock(inode, block_start, &write_bytes, false) > 0) { | |
| /* For nocow case, no need to reserve data space. */ | |
| ASSERT(write_bytes == blocksize, "write_bytes=%zu blocksize=%u", | |
| write_bytes, blocksize); | |
| only_release_metadata = true; | |
| } else { | |
| goto out; | |
| } | |
| } | |
| ret = btrfs_delalloc_reserve_metadata(inode, blocksize, blocksize, false); | |
| if (ret < 0) { | |
| if (!only_release_metadata) | |
| btrfs_free_reserved_data_space(inode, data_reserved, | |
| block_start, blocksize); | |
| goto out; | |
| } | |
| again: | |
| folio = __filemap_get_folio(mapping, index, | |
| FGP_LOCK | FGP_ACCESSED | FGP_CREAT, mask); | |
| if (IS_ERR(folio)) { | |
| if (only_release_metadata) | |
| btrfs_delalloc_release_metadata(inode, blocksize, true); | |
| else | |
| btrfs_delalloc_release_space(inode, data_reserved, | |
| block_start, blocksize, true); | |
| btrfs_delalloc_release_extents(inode, blocksize); | |
| ret = PTR_ERR(folio); | |
| goto out; | |
| } | |
| if (!folio_test_uptodate(folio)) { | |
| ret = btrfs_read_folio(NULL, folio); | |
| folio_lock(folio); | |
| if (folio->mapping != mapping) { | |
| folio_unlock(folio); | |
| folio_put(folio); | |
| goto again; | |
| } | |
| if (unlikely(!folio_test_uptodate(folio))) { | |
| ret = -EIO; | |
| goto out_unlock; | |
| } | |
| } | |
| /* | |
| * We unlock the page after the io is completed and then re-lock it | |
| * above. release_folio() could have come in between that and cleared | |
| * folio private, but left the page in the mapping. Set the page mapped | |
| * here to make sure it's properly set for the subpage stuff. | |
| */ | |
| ret = set_folio_extent_mapped(folio); | |
| if (ret < 0) | |
| goto out_unlock; | |
| folio_wait_writeback(folio); | |
| btrfs_lock_extent(io_tree, block_start, block_end, &cached_state); | |
| ordered = btrfs_lookup_ordered_extent(inode, block_start); | |
| if (ordered) { | |
| btrfs_unlock_extent(io_tree, block_start, block_end, &cached_state); | |
| folio_unlock(folio); | |
| folio_put(folio); | |
| btrfs_start_ordered_extent(ordered); | |
| btrfs_put_ordered_extent(ordered); | |
| goto again; | |
| } | |
| ret = btrfs_reset_extent_delalloc(inode, block_start, block_end, 0, &cached_state); | |
| if (ret) { | |
| btrfs_unlock_extent(io_tree, block_start, block_end, &cached_state); | |
| goto out_unlock; | |
| } | |
| if (end == (u64)-1) { | |
| /* | |
| * We're truncating beyond EOF, the remaining blocks normally are | |
| * already holes thus no need to zero again, but it's possible for | |
| * fs block size < page size cases to have memory mapped writes | |
| * to pollute ranges beyond EOF. | |
| * | |
| * In that case although such polluted blocks beyond EOF will | |
| * not reach disk, it still affects our page caches. | |
| */ | |
| zero_start = max_t(u64, folio_pos(folio), start); | |
| zero_end = min_t(u64, folio_next_pos(folio) - 1, end); | |
| } else { | |
| zero_start = max_t(u64, block_start, start); | |
| zero_end = min_t(u64, block_end, end); | |
| } | |
| folio_zero_range(folio, zero_start - folio_pos(folio), | |
| zero_end - zero_start + 1); | |
| btrfs_folio_set_dirty(fs_info, folio, block_start, | |
| block_end + 1 - block_start); | |
| if (only_release_metadata) | |
| btrfs_set_extent_bit(&inode->io_tree, block_start, block_end, | |
| EXTENT_NORESERVE, &cached_state); | |
| btrfs_unlock_extent(io_tree, block_start, block_end, &cached_state); | |
| out_unlock: | |
| if (ret) { | |
| if (only_release_metadata) | |
| btrfs_delalloc_release_metadata(inode, blocksize, true); | |
| else | |
| btrfs_delalloc_release_space(inode, data_reserved, | |
| block_start, blocksize, true); | |
| } | |
| btrfs_delalloc_release_extents(inode, blocksize); | |
| folio_unlock(folio); | |
| folio_put(folio); | |
| out: | |
| if (only_release_metadata) | |
| btrfs_check_nocow_unlock(inode); | |
| extent_changeset_free(data_reserved); | |
| return ret; | |
| } | |
| static int maybe_insert_hole(struct btrfs_inode *inode, u64 offset, u64 len) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct btrfs_trans_handle *trans; | |
| struct btrfs_drop_extents_args drop_args = { 0 }; | |
| int ret; | |
| /* | |
| * If NO_HOLES is enabled, we don't need to do anything. | |
| * Later, up in the call chain, either btrfs_set_inode_last_sub_trans() | |
| * or btrfs_update_inode() will be called, which guarantee that the next | |
| * fsync will know this inode was changed and needs to be logged. | |
| */ | |
| if (btrfs_fs_incompat(fs_info, NO_HOLES)) | |
| return 0; | |
| /* | |
| * 1 - for the one we're dropping | |
| * 1 - for the one we're adding | |
| * 1 - for updating the inode. | |
| */ | |
| trans = btrfs_start_transaction(root, 3); | |
| if (IS_ERR(trans)) | |
| return PTR_ERR(trans); | |
| drop_args.start = offset; | |
| drop_args.end = offset + len; | |
| drop_args.drop_cache = true; | |
| ret = btrfs_drop_extents(trans, root, inode, &drop_args); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| btrfs_end_transaction(trans); | |
| return ret; | |
| } | |
| ret = btrfs_insert_hole_extent(trans, root, btrfs_ino(inode), offset, len); | |
| if (ret) { | |
| btrfs_abort_transaction(trans, ret); | |
| } else { | |
| btrfs_update_inode_bytes(inode, 0, drop_args.bytes_found); | |
| btrfs_update_inode(trans, inode); | |
| } | |
| btrfs_end_transaction(trans); | |
| return ret; | |
| } | |
| /* | |
| * This function puts in dummy file extents for the area we're creating a hole | |
| * for. So if we are truncating this file to a larger size we need to insert | |
| * these file extents so that btrfs_get_extent will return a EXTENT_MAP_HOLE for | |
| * the range between oldsize and size | |
| */ | |
| int btrfs_cont_expand(struct btrfs_inode *inode, loff_t oldsize, loff_t size) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct extent_io_tree *io_tree = &inode->io_tree; | |
| struct extent_map *em = NULL; | |
| struct extent_state *cached_state = NULL; | |
| u64 hole_start = ALIGN(oldsize, fs_info->sectorsize); | |
| u64 block_end = ALIGN(size, fs_info->sectorsize); | |
| u64 last_byte; | |
| u64 cur_offset; | |
| u64 hole_size; | |
| int ret = 0; | |
| /* | |
| * If our size started in the middle of a block we need to zero out the | |
| * rest of the block before we expand the i_size, otherwise we could | |
| * expose stale data. | |
| */ | |
| ret = btrfs_truncate_block(inode, oldsize, oldsize, -1); | |
| if (ret) | |
| return ret; | |
| if (size <= hole_start) | |
| return 0; | |
| btrfs_lock_and_flush_ordered_range(inode, hole_start, block_end - 1, | |
| &cached_state); | |
| cur_offset = hole_start; | |
| while (1) { | |
| em = btrfs_get_extent(inode, NULL, cur_offset, block_end - cur_offset); | |
| if (IS_ERR(em)) { | |
| ret = PTR_ERR(em); | |
| em = NULL; | |
| break; | |
| } | |
| last_byte = min(btrfs_extent_map_end(em), block_end); | |
| last_byte = ALIGN(last_byte, fs_info->sectorsize); | |
| hole_size = last_byte - cur_offset; | |
| if (!(em->flags & EXTENT_FLAG_PREALLOC)) { | |
| struct extent_map *hole_em; | |
| ret = maybe_insert_hole(inode, cur_offset, hole_size); | |
| if (ret) | |
| break; | |
| ret = btrfs_inode_set_file_extent_range(inode, | |
| cur_offset, hole_size); | |
| if (ret) | |
| break; | |
| hole_em = btrfs_alloc_extent_map(); | |
| if (!hole_em) { | |
| btrfs_drop_extent_map_range(inode, cur_offset, | |
| cur_offset + hole_size - 1, | |
| false); | |
| btrfs_set_inode_full_sync(inode); | |
| goto next; | |
| } | |
| hole_em->start = cur_offset; | |
| hole_em->len = hole_size; | |
| hole_em->disk_bytenr = EXTENT_MAP_HOLE; | |
| hole_em->disk_num_bytes = 0; | |
| hole_em->ram_bytes = hole_size; | |
| hole_em->generation = btrfs_get_fs_generation(fs_info); | |
| ret = btrfs_replace_extent_map_range(inode, hole_em, true); | |
| btrfs_free_extent_map(hole_em); | |
| } else { | |
| ret = btrfs_inode_set_file_extent_range(inode, | |
| cur_offset, hole_size); | |
| if (ret) | |
| break; | |
| } | |
| next: | |
| btrfs_free_extent_map(em); | |
| em = NULL; | |
| cur_offset = last_byte; | |
| if (cur_offset >= block_end) | |
| break; | |
| } | |
| btrfs_free_extent_map(em); | |
| btrfs_unlock_extent(io_tree, hole_start, block_end - 1, &cached_state); | |
| return ret; | |
| } | |
| static int btrfs_setsize(struct inode *inode, struct iattr *attr) | |
| { | |
| struct btrfs_root *root = BTRFS_I(inode)->root; | |
| struct btrfs_trans_handle *trans; | |
| loff_t oldsize = i_size_read(inode); | |
| loff_t newsize = attr->ia_size; | |
| int mask = attr->ia_valid; | |
| int ret; | |
| /* | |
| * The regular truncate() case without ATTR_CTIME and ATTR_MTIME is a | |
| * special case where we need to update the times despite not having | |
| * these flags set. For all other operations the VFS set these flags | |
| * explicitly if it wants a timestamp update. | |
| */ | |
| if (newsize != oldsize) { | |
| inode_inc_iversion(inode); | |
| if (!(mask & (ATTR_CTIME | ATTR_MTIME))) { | |
| inode_set_mtime_to_ts(inode, | |
| inode_set_ctime_current(inode)); | |
| } | |
| } | |
| if (newsize > oldsize) { | |
| /* | |
| * Don't do an expanding truncate while snapshotting is ongoing. | |
| * This is to ensure the snapshot captures a fully consistent | |
| * state of this file - if the snapshot captures this expanding | |
| * truncation, it must capture all writes that happened before | |
| * this truncation. | |
| */ | |
| btrfs_drew_write_lock(&root->snapshot_lock); | |
| ret = btrfs_cont_expand(BTRFS_I(inode), oldsize, newsize); | |
| if (ret) { | |
| btrfs_drew_write_unlock(&root->snapshot_lock); | |
| return ret; | |
| } | |
| trans = btrfs_start_transaction(root, 1); | |
| if (IS_ERR(trans)) { | |
| btrfs_drew_write_unlock(&root->snapshot_lock); | |
| return PTR_ERR(trans); | |
| } | |
| i_size_write(inode, newsize); | |
| btrfs_inode_safe_disk_i_size_write(BTRFS_I(inode), 0); | |
| pagecache_isize_extended(inode, oldsize, newsize); | |
| ret = btrfs_update_inode(trans, BTRFS_I(inode)); | |
| btrfs_drew_write_unlock(&root->snapshot_lock); | |
| btrfs_end_transaction(trans); | |
| } else { | |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(inode); | |
| if (btrfs_is_zoned(fs_info)) { | |
| ret = btrfs_wait_ordered_range(BTRFS_I(inode), | |
| ALIGN(newsize, fs_info->sectorsize), | |
| (u64)-1); | |
| if (ret) | |
| return ret; | |
| } | |
| /* | |
| * We're truncating a file that used to have good data down to | |
| * zero. Make sure any new writes to the file get on disk | |
| * on close. | |
| */ | |
| if (newsize == 0 && oldsize != 0) | |
| set_bit(BTRFS_INODE_FLUSH_ON_CLOSE, | |
| &BTRFS_I(inode)->runtime_flags); | |
| truncate_setsize(inode, newsize); | |
| inode_dio_wait(inode); | |
| ret = btrfs_truncate(BTRFS_I(inode), newsize == oldsize); | |
| if (ret && inode->i_nlink) { | |
| int ret2; | |
| /* | |
| * Truncate failed, so fix up the in-memory size. We | |
| * adjusted disk_i_size down as we removed extents, so | |
| * wait for disk_i_size to be stable and then update the | |
| * in-memory size to match. | |
| */ | |
| ret2 = btrfs_wait_ordered_range(BTRFS_I(inode), 0, (u64)-1); | |
| if (ret2) | |
| return ret2; | |
| i_size_write(inode, BTRFS_I(inode)->disk_i_size); | |
| } | |
| } | |
| return ret; | |
| } | |
| static int btrfs_setattr(struct mnt_idmap *idmap, struct dentry *dentry, | |
| struct iattr *attr) | |
| { | |
| struct inode *inode = d_inode(dentry); | |
| struct btrfs_root *root = BTRFS_I(inode)->root; | |
| int ret; | |
| if (btrfs_root_readonly(root)) | |
| return -EROFS; | |
| ret = setattr_prepare(idmap, dentry, attr); | |
| if (ret) | |
| return ret; | |
| if (S_ISREG(inode->i_mode) && (attr->ia_valid & ATTR_SIZE)) { | |
| ret = btrfs_setsize(inode, attr); | |
| if (ret) | |
| return ret; | |
| } | |
| if (attr->ia_valid) { | |
| setattr_copy(idmap, inode, attr); | |
| inode_inc_iversion(inode); | |
| ret = btrfs_dirty_inode(BTRFS_I(inode)); | |
| if (!ret && attr->ia_valid & ATTR_MODE) | |
| ret = posix_acl_chmod(idmap, dentry, inode->i_mode); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * While truncating the inode pages during eviction, we get the VFS | |
| * calling btrfs_invalidate_folio() against each folio of the inode. This | |
| * is slow because the calls to btrfs_invalidate_folio() result in a | |
| * huge amount of calls to lock_extent() and clear_extent_bit(), | |
| * which keep merging and splitting extent_state structures over and over, | |
| * wasting lots of time. | |
| * | |
| * Therefore if the inode is being evicted, let btrfs_invalidate_folio() | |
| * skip all those expensive operations on a per folio basis and do only | |
| * the ordered io finishing, while we release here the extent_map and | |
| * extent_state structures, without the excessive merging and splitting. | |
| */ | |
| static void evict_inode_truncate_pages(struct inode *inode) | |
| { | |
| struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree; | |
| struct rb_node *node; | |
| ASSERT(inode_state_read_once(inode) & I_FREEING); | |
| truncate_inode_pages_final(&inode->i_data); | |
| btrfs_drop_extent_map_range(BTRFS_I(inode), 0, (u64)-1, false); | |
| /* | |
| * Keep looping until we have no more ranges in the io tree. | |
| * We can have ongoing bios started by readahead that have | |
| * their endio callback (extent_io.c:end_bio_extent_readpage) | |
| * still in progress (unlocked the pages in the bio but did not yet | |
| * unlocked the ranges in the io tree). Therefore this means some | |
| * ranges can still be locked and eviction started because before | |
| * submitting those bios, which are executed by a separate task (work | |
| * queue kthread), inode references (inode->i_count) were not taken | |
| * (which would be dropped in the end io callback of each bio). | |
| * Therefore here we effectively end up waiting for those bios and | |
| * anyone else holding locked ranges without having bumped the inode's | |
| * reference count - if we don't do it, when they access the inode's | |
| * io_tree to unlock a range it may be too late, leading to an | |
| * use-after-free issue. | |
| */ | |
| spin_lock(&io_tree->lock); | |
| while (!RB_EMPTY_ROOT(&io_tree->state)) { | |
| struct extent_state *state; | |
| struct extent_state *cached_state = NULL; | |
| u64 start; | |
| u64 end; | |
| unsigned state_flags; | |
| node = rb_first(&io_tree->state); | |
| state = rb_entry(node, struct extent_state, rb_node); | |
| start = state->start; | |
| end = state->end; | |
| state_flags = state->state; | |
| spin_unlock(&io_tree->lock); | |
| btrfs_lock_extent(io_tree, start, end, &cached_state); | |
| /* | |
| * If still has DELALLOC flag, the extent didn't reach disk, | |
| * and its reserved space won't be freed by delayed_ref. | |
| * So we need to free its reserved space here. | |
| * (Refer to comment in btrfs_invalidate_folio, case 2) | |
| * | |
| * Note, end is the bytenr of last byte, so we need + 1 here. | |
| */ | |
| if (state_flags & EXTENT_DELALLOC) | |
| btrfs_qgroup_free_data(BTRFS_I(inode), NULL, start, | |
| end - start + 1, NULL); | |
| btrfs_clear_extent_bit(io_tree, start, end, | |
| EXTENT_CLEAR_ALL_BITS | EXTENT_DO_ACCOUNTING, | |
| &cached_state); | |
| cond_resched(); | |
| spin_lock(&io_tree->lock); | |
| } | |
| spin_unlock(&io_tree->lock); | |
| } | |
| static struct btrfs_trans_handle *evict_refill_and_join(struct btrfs_root *root, | |
| struct btrfs_block_rsv *rsv) | |
| { | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct btrfs_trans_handle *trans; | |
| u64 delayed_refs_extra = btrfs_calc_delayed_ref_bytes(fs_info, 1); | |
| int ret; | |
| /* | |
| * Eviction should be taking place at some place safe because of our | |
| * delayed iputs. However the normal flushing code will run delayed | |
| * iputs, so we cannot use FLUSH_ALL otherwise we'll deadlock. | |
| * | |
| * We reserve the delayed_refs_extra here again because we can't use | |
| * btrfs_start_transaction(root, 0) for the same deadlocky reason as | |
| * above. We reserve our extra bit here because we generate a ton of | |
| * delayed refs activity by truncating. | |
| * | |
| * BTRFS_RESERVE_FLUSH_EVICT will steal from the global_rsv if it can, | |
| * if we fail to make this reservation we can re-try without the | |
| * delayed_refs_extra so we can make some forward progress. | |
| */ | |
| ret = btrfs_block_rsv_refill(fs_info, rsv, rsv->size + delayed_refs_extra, | |
| BTRFS_RESERVE_FLUSH_EVICT); | |
| if (ret) { | |
| ret = btrfs_block_rsv_refill(fs_info, rsv, rsv->size, | |
| BTRFS_RESERVE_FLUSH_EVICT); | |
| if (ret) { | |
| btrfs_warn(fs_info, | |
| "could not allocate space for delete; will truncate on mount"); | |
| return ERR_PTR(-ENOSPC); | |
| } | |
| delayed_refs_extra = 0; | |
| } | |
| trans = btrfs_join_transaction(root); | |
| if (IS_ERR(trans)) | |
| return trans; | |
| if (delayed_refs_extra) { | |
| trans->block_rsv = &fs_info->trans_block_rsv; | |
| trans->bytes_reserved = delayed_refs_extra; | |
| btrfs_block_rsv_migrate(rsv, trans->block_rsv, | |
| delayed_refs_extra, true); | |
| } | |
| return trans; | |
| } | |
| void btrfs_evict_inode(struct inode *inode) | |
| { | |
| struct btrfs_fs_info *fs_info; | |
| struct btrfs_trans_handle *trans; | |
| struct btrfs_root *root = BTRFS_I(inode)->root; | |
| struct btrfs_block_rsv rsv; | |
| int ret; | |
| trace_btrfs_inode_evict(inode); | |
| if (!root) | |
| goto clear_inode; | |
| fs_info = inode_to_fs_info(inode); | |
| evict_inode_truncate_pages(inode); | |
| if (inode->i_nlink && | |
| ((btrfs_root_refs(&root->root_item) != 0 && | |
| btrfs_root_id(root) != BTRFS_ROOT_TREE_OBJECTID) || | |
| btrfs_is_free_space_inode(BTRFS_I(inode)))) | |
| goto out; | |
| if (is_bad_inode(inode)) | |
| goto out; | |
| if (test_bit(BTRFS_FS_LOG_RECOVERING, &fs_info->flags)) | |
| goto out; | |
| if (inode->i_nlink > 0) { | |
| BUG_ON(btrfs_root_refs(&root->root_item) != 0 && | |
| btrfs_root_id(root) != BTRFS_ROOT_TREE_OBJECTID); | |
| goto out; | |
| } | |
| /* | |
| * This makes sure the inode item in tree is uptodate and the space for | |
| * the inode update is released. | |
| */ | |
| ret = btrfs_commit_inode_delayed_inode(BTRFS_I(inode)); | |
| if (ret) | |
| goto out; | |
| /* | |
| * This drops any pending insert or delete operations we have for this | |
| * inode. We could have a delayed dir index deletion queued up, but | |
| * we're removing the inode completely so that'll be taken care of in | |
| * the truncate. | |
| */ | |
| btrfs_kill_delayed_inode_items(BTRFS_I(inode)); | |
| btrfs_init_metadata_block_rsv(fs_info, &rsv, BTRFS_BLOCK_RSV_TEMP); | |
| rsv.size = btrfs_calc_metadata_size(fs_info, 1); | |
| rsv.failfast = true; | |
| btrfs_i_size_write(BTRFS_I(inode), 0); | |
| while (1) { | |
| struct btrfs_truncate_control control = { | |
| .inode = BTRFS_I(inode), | |
| .ino = btrfs_ino(BTRFS_I(inode)), | |
| .new_size = 0, | |
| .min_type = 0, | |
| }; | |
| trans = evict_refill_and_join(root, &rsv); | |
| if (IS_ERR(trans)) | |
| goto out_release; | |
| trans->block_rsv = &rsv; | |
| ret = btrfs_truncate_inode_items(trans, root, &control); | |
| trans->block_rsv = &fs_info->trans_block_rsv; | |
| btrfs_end_transaction(trans); | |
| /* | |
| * We have not added new delayed items for our inode after we | |
| * have flushed its delayed items, so no need to throttle on | |
| * delayed items. However we have modified extent buffers. | |
| */ | |
| btrfs_btree_balance_dirty_nodelay(fs_info); | |
| if (ret && ret != -ENOSPC && ret != -EAGAIN) | |
| goto out_release; | |
| else if (!ret) | |
| break; | |
| } | |
| /* | |
| * Errors here aren't a big deal, it just means we leave orphan items in | |
| * the tree. They will be cleaned up on the next mount. If the inode | |
| * number gets reused, cleanup deletes the orphan item without doing | |
| * anything, and unlink reuses the existing orphan item. | |
| * | |
| * If it turns out that we are dropping too many of these, we might want | |
| * to add a mechanism for retrying these after a commit. | |
| */ | |
| trans = evict_refill_and_join(root, &rsv); | |
| if (!IS_ERR(trans)) { | |
| trans->block_rsv = &rsv; | |
| btrfs_orphan_del(trans, BTRFS_I(inode)); | |
| trans->block_rsv = &fs_info->trans_block_rsv; | |
| btrfs_end_transaction(trans); | |
| } | |
| out_release: | |
| btrfs_block_rsv_release(fs_info, &rsv, (u64)-1, NULL); | |
| out: | |
| /* | |
| * If we didn't successfully delete, the orphan item will still be in | |
| * the tree and we'll retry on the next mount. Again, we might also want | |
| * to retry these periodically in the future. | |
| */ | |
| btrfs_remove_delayed_node(BTRFS_I(inode)); | |
| clear_inode: | |
| clear_inode(inode); | |
| } | |
| /* | |
| * Return the key found in the dir entry in the location pointer, fill @type | |
| * with BTRFS_FT_*, and return 0. | |
| * | |
| * If no dir entries were found, returns -ENOENT. | |
| * If found a corrupted location in dir entry, returns -EUCLEAN. | |
| */ | |
| static int btrfs_inode_by_name(struct btrfs_inode *dir, struct dentry *dentry, | |
| struct btrfs_key *location, u8 *type) | |
| { | |
| struct btrfs_dir_item *di; | |
| BTRFS_PATH_AUTO_FREE(path); | |
| struct btrfs_root *root = dir->root; | |
| int ret = 0; | |
| struct fscrypt_name fname; | |
| path = btrfs_alloc_path(); | |
| if (!path) | |
| return -ENOMEM; | |
| ret = fscrypt_setup_filename(&dir->vfs_inode, &dentry->d_name, 1, &fname); | |
| if (ret < 0) | |
| return ret; | |
| /* | |
| * fscrypt_setup_filename() should never return a positive value, but | |
| * gcc on sparc/parisc thinks it can, so assert that doesn't happen. | |
| */ | |
| ASSERT(ret == 0); | |
| /* This needs to handle no-key deletions later on */ | |
| di = btrfs_lookup_dir_item(NULL, root, path, btrfs_ino(dir), | |
| &fname.disk_name, 0); | |
| if (IS_ERR_OR_NULL(di)) { | |
| ret = di ? PTR_ERR(di) : -ENOENT; | |
| goto out; | |
| } | |
| btrfs_dir_item_key_to_cpu(path->nodes[0], di, location); | |
| if (unlikely(location->type != BTRFS_INODE_ITEM_KEY && | |
| location->type != BTRFS_ROOT_ITEM_KEY)) { | |
| ret = -EUCLEAN; | |
| btrfs_warn(root->fs_info, | |
| "%s gets something invalid in DIR_ITEM (name %s, directory ino %llu, location " BTRFS_KEY_FMT ")", | |
| __func__, fname.disk_name.name, btrfs_ino(dir), | |
| BTRFS_KEY_FMT_VALUE(location)); | |
| } | |
| if (!ret) | |
| *type = btrfs_dir_ftype(path->nodes[0], di); | |
| out: | |
| fscrypt_free_filename(&fname); | |
| return ret; | |
| } | |
| /* | |
| * when we hit a tree root in a directory, the btrfs part of the inode | |
| * needs to be changed to reflect the root directory of the tree root. This | |
| * is kind of like crossing a mount point. | |
| */ | |
| static int fixup_tree_root_location(struct btrfs_fs_info *fs_info, | |
| struct btrfs_inode *dir, | |
| struct dentry *dentry, | |
| struct btrfs_key *location, | |
| struct btrfs_root **sub_root) | |
| { | |
| BTRFS_PATH_AUTO_FREE(path); | |
| struct btrfs_root *new_root; | |
| struct btrfs_root_ref *ref; | |
| struct extent_buffer *leaf; | |
| struct btrfs_key key; | |
| int ret; | |
| int err = 0; | |
| struct fscrypt_name fname; | |
| ret = fscrypt_setup_filename(&dir->vfs_inode, &dentry->d_name, 0, &fname); | |
| if (ret) | |
| return ret; | |
| path = btrfs_alloc_path(); | |
| if (!path) { | |
| err = -ENOMEM; | |
| goto out; | |
| } | |
| err = -ENOENT; | |
| key.objectid = btrfs_root_id(dir->root); | |
| key.type = BTRFS_ROOT_REF_KEY; | |
| key.offset = location->objectid; | |
| ret = btrfs_search_slot(NULL, fs_info->tree_root, &key, path, 0, 0); | |
| if (ret) { | |
| if (ret < 0) | |
| err = ret; | |
| goto out; | |
| } | |
| leaf = path->nodes[0]; | |
| ref = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_root_ref); | |
| if (btrfs_root_ref_dirid(leaf, ref) != btrfs_ino(dir) || | |
| btrfs_root_ref_name_len(leaf, ref) != fname.disk_name.len) | |
| goto out; | |
| ret = memcmp_extent_buffer(leaf, fname.disk_name.name, | |
| (unsigned long)(ref + 1), fname.disk_name.len); | |
| if (ret) | |
| goto out; | |
| btrfs_release_path(path); | |
| new_root = btrfs_get_fs_root(fs_info, location->objectid, true); | |
| if (IS_ERR(new_root)) { | |
| err = PTR_ERR(new_root); | |
| goto out; | |
| } | |
| *sub_root = new_root; | |
| location->objectid = btrfs_root_dirid(&new_root->root_item); | |
| location->type = BTRFS_INODE_ITEM_KEY; | |
| location->offset = 0; | |
| err = 0; | |
| out: | |
| fscrypt_free_filename(&fname); | |
| return err; | |
| } | |
| static void btrfs_del_inode_from_root(struct btrfs_inode *inode) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_inode *entry; | |
| bool empty = false; | |
| xa_lock(&root->inodes); | |
| /* | |
| * This btrfs_inode is being freed and has already been unhashed at this | |
| * point. It's possible that another btrfs_inode has already been | |
| * allocated for the same inode and inserted itself into the root, so | |
| * don't delete it in that case. | |
| * | |
| * Note that this shouldn't need to allocate memory, so the gfp flags | |
| * don't really matter. | |
| */ | |
| entry = __xa_cmpxchg(&root->inodes, btrfs_ino(inode), inode, NULL, | |
| GFP_ATOMIC); | |
| if (entry == inode) | |
| empty = xa_empty(&root->inodes); | |
| xa_unlock(&root->inodes); | |
| if (empty && btrfs_root_refs(&root->root_item) == 0) { | |
| xa_lock(&root->inodes); | |
| empty = xa_empty(&root->inodes); | |
| xa_unlock(&root->inodes); | |
| if (empty) | |
| btrfs_add_dead_root(root); | |
| } | |
| } | |
| static int btrfs_init_locked_inode(struct inode *inode, void *p) | |
| { | |
| struct btrfs_iget_args *args = p; | |
| btrfs_set_inode_number(BTRFS_I(inode), args->ino); | |
| BTRFS_I(inode)->root = btrfs_grab_root(args->root); | |
| if (args->root && args->root == args->root->fs_info->tree_root && | |
| args->ino != BTRFS_BTREE_INODE_OBJECTID) | |
| set_bit(BTRFS_INODE_FREE_SPACE_INODE, | |
| &BTRFS_I(inode)->runtime_flags); | |
| return 0; | |
| } | |
| static int btrfs_find_actor(struct inode *inode, void *opaque) | |
| { | |
| struct btrfs_iget_args *args = opaque; | |
| return args->ino == btrfs_ino(BTRFS_I(inode)) && | |
| args->root == BTRFS_I(inode)->root; | |
| } | |
| static struct btrfs_inode *btrfs_iget_locked(u64 ino, struct btrfs_root *root) | |
| { | |
| struct inode *inode; | |
| struct btrfs_iget_args args; | |
| unsigned long hashval = btrfs_inode_hash(ino, root); | |
| args.ino = ino; | |
| args.root = root; | |
| inode = iget5_locked_rcu(root->fs_info->sb, hashval, btrfs_find_actor, | |
| btrfs_init_locked_inode, | |
| (void *)&args); | |
| if (!inode) | |
| return NULL; | |
| return BTRFS_I(inode); | |
| } | |
| /* | |
| * Get an inode object given its inode number and corresponding root. Path is | |
| * preallocated to prevent recursing back to iget through allocator. | |
| */ | |
| struct btrfs_inode *btrfs_iget_path(u64 ino, struct btrfs_root *root, | |
| struct btrfs_path *path) | |
| { | |
| struct btrfs_inode *inode; | |
| int ret; | |
| inode = btrfs_iget_locked(ino, root); | |
| if (!inode) | |
| return ERR_PTR(-ENOMEM); | |
| if (!(inode_state_read_once(&inode->vfs_inode) & I_NEW)) | |
| return inode; | |
| ret = btrfs_read_locked_inode(inode, path); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| unlock_new_inode(&inode->vfs_inode); | |
| return inode; | |
| } | |
| /* | |
| * Get an inode object given its inode number and corresponding root. | |
| */ | |
| struct btrfs_inode *btrfs_iget(u64 ino, struct btrfs_root *root) | |
| { | |
| struct btrfs_inode *inode; | |
| struct btrfs_path *path; | |
| int ret; | |
| inode = btrfs_iget_locked(ino, root); | |
| if (!inode) | |
| return ERR_PTR(-ENOMEM); | |
| if (!(inode_state_read_once(&inode->vfs_inode) & I_NEW)) | |
| return inode; | |
| path = btrfs_alloc_path(); | |
| if (!path) { | |
| iget_failed(&inode->vfs_inode); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| ret = btrfs_read_locked_inode(inode, path); | |
| btrfs_free_path(path); | |
| if (ret) | |
| return ERR_PTR(ret); | |
| if (S_ISDIR(inode->vfs_inode.i_mode)) | |
| inode->vfs_inode.i_opflags |= IOP_FASTPERM_MAY_EXEC; | |
| unlock_new_inode(&inode->vfs_inode); | |
| return inode; | |
| } | |
| static struct btrfs_inode *new_simple_dir(struct inode *dir, | |
| struct btrfs_key *key, | |
| struct btrfs_root *root) | |
| { | |
| struct timespec64 ts; | |
| struct inode *vfs_inode; | |
| struct btrfs_inode *inode; | |
| vfs_inode = new_inode(dir->i_sb); | |
| if (!vfs_inode) | |
| return ERR_PTR(-ENOMEM); | |
| inode = BTRFS_I(vfs_inode); | |
| inode->root = btrfs_grab_root(root); | |
| inode->ref_root_id = key->objectid; | |
| set_bit(BTRFS_INODE_ROOT_STUB, &inode->runtime_flags); | |
| set_bit(BTRFS_INODE_DUMMY, &inode->runtime_flags); | |
| btrfs_set_inode_number(inode, BTRFS_EMPTY_SUBVOL_DIR_OBJECTID); | |
| /* | |
| * We only need lookup, the rest is read-only and there's no inode | |
| * associated with the dentry | |
| */ | |
| vfs_inode->i_op = &simple_dir_inode_operations; | |
| vfs_inode->i_opflags &= ~IOP_XATTR; | |
| vfs_inode->i_fop = &simple_dir_operations; | |
| vfs_inode->i_mode = S_IFDIR | S_IRUGO | S_IWUSR | S_IXUGO; | |
| ts = inode_set_ctime_current(vfs_inode); | |
| inode_set_mtime_to_ts(vfs_inode, ts); | |
| inode_set_atime_to_ts(vfs_inode, inode_get_atime(dir)); | |
| inode->i_otime_sec = ts.tv_sec; | |
| inode->i_otime_nsec = ts.tv_nsec; | |
| vfs_inode->i_uid = dir->i_uid; | |
| vfs_inode->i_gid = dir->i_gid; | |
| return inode; | |
| } | |
| static_assert(BTRFS_FT_UNKNOWN == FT_UNKNOWN); | |
| static_assert(BTRFS_FT_REG_FILE == FT_REG_FILE); | |
| static_assert(BTRFS_FT_DIR == FT_DIR); | |
| static_assert(BTRFS_FT_CHRDEV == FT_CHRDEV); | |
| static_assert(BTRFS_FT_BLKDEV == FT_BLKDEV); | |
| static_assert(BTRFS_FT_FIFO == FT_FIFO); | |
| static_assert(BTRFS_FT_SOCK == FT_SOCK); | |
| static_assert(BTRFS_FT_SYMLINK == FT_SYMLINK); | |
| static inline u8 btrfs_inode_type(const struct btrfs_inode *inode) | |
| { | |
| return fs_umode_to_ftype(inode->vfs_inode.i_mode); | |
| } | |
| struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry) | |
| { | |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(dir); | |
| struct btrfs_inode *inode; | |
| struct btrfs_root *root = BTRFS_I(dir)->root; | |
| struct btrfs_root *sub_root = root; | |
| struct btrfs_key location = { 0 }; | |
| u8 di_type = 0; | |
| int ret = 0; | |
| if (dentry->d_name.len > BTRFS_NAME_LEN) | |
| return ERR_PTR(-ENAMETOOLONG); | |
| ret = btrfs_inode_by_name(BTRFS_I(dir), dentry, &location, &di_type); | |
| if (ret < 0) | |
| return ERR_PTR(ret); | |
| if (location.type == BTRFS_INODE_ITEM_KEY) { | |
| inode = btrfs_iget(location.objectid, root); | |
| if (IS_ERR(inode)) | |
| return ERR_CAST(inode); | |
| /* Do extra check against inode mode with di_type */ | |
| if (unlikely(btrfs_inode_type(inode) != di_type)) { | |
| btrfs_crit(fs_info, | |
| "inode mode mismatch with dir: inode mode=0%o btrfs type=%u dir type=%u", | |
| inode->vfs_inode.i_mode, btrfs_inode_type(inode), | |
| di_type); | |
| iput(&inode->vfs_inode); | |
| return ERR_PTR(-EUCLEAN); | |
| } | |
| return &inode->vfs_inode; | |
| } | |
| ret = fixup_tree_root_location(fs_info, BTRFS_I(dir), dentry, | |
| &location, &sub_root); | |
| if (ret < 0) { | |
| if (ret != -ENOENT) | |
| inode = ERR_PTR(ret); | |
| else | |
| inode = new_simple_dir(dir, &location, root); | |
| } else { | |
| inode = btrfs_iget(location.objectid, sub_root); | |
| btrfs_put_root(sub_root); | |
| if (IS_ERR(inode)) | |
| return ERR_CAST(inode); | |
| down_read(&fs_info->cleanup_work_sem); | |
| if (!sb_rdonly(inode->vfs_inode.i_sb)) | |
| ret = btrfs_orphan_cleanup(sub_root); | |
| up_read(&fs_info->cleanup_work_sem); | |
| if (ret) { | |
| iput(&inode->vfs_inode); | |
| inode = ERR_PTR(ret); | |
| } | |
| } | |
| if (IS_ERR(inode)) | |
| return ERR_CAST(inode); | |
| return &inode->vfs_inode; | |
| } | |
| static int btrfs_dentry_delete(const struct dentry *dentry) | |
| { | |
| struct btrfs_root *root; | |
| struct inode *inode = d_inode(dentry); | |
| if (!inode && !IS_ROOT(dentry)) | |
| inode = d_inode(dentry->d_parent); | |
| if (inode) { | |
| root = BTRFS_I(inode)->root; | |
| if (btrfs_root_refs(&root->root_item) == 0) | |
| return 1; | |
| if (btrfs_ino(BTRFS_I(inode)) == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID) | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static struct dentry *btrfs_lookup(struct inode *dir, struct dentry *dentry, | |
| unsigned int flags) | |
| { | |
| struct inode *inode = btrfs_lookup_dentry(dir, dentry); | |
| if (inode == ERR_PTR(-ENOENT)) | |
| inode = NULL; | |
| return d_splice_alias(inode, dentry); | |
| } | |
| /* | |
| * Find the highest existing sequence number in a directory and then set the | |
| * in-memory index_cnt variable to the first free sequence number. | |
| */ | |
| static int btrfs_set_inode_index_count(struct btrfs_inode *inode) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_key key, found_key; | |
| BTRFS_PATH_AUTO_FREE(path); | |
| struct extent_buffer *leaf; | |
| int ret; | |
| key.objectid = btrfs_ino(inode); | |
| key.type = BTRFS_DIR_INDEX_KEY; | |
| key.offset = (u64)-1; | |
| path = btrfs_alloc_path(); | |
| if (!path) | |
| return -ENOMEM; | |
| ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); | |
| if (ret < 0) | |
| return ret; | |
| if (unlikely(ret == 0)) { | |
| /* | |
| * Key with offset -1 found, there would have to exist a dir | |
| * index item with such offset, but this is out of the valid | |
| * range. | |
| */ | |
| btrfs_err(root->fs_info, | |
| "unexpected exact match for DIR_INDEX key, inode %llu", | |
| btrfs_ino(inode)); | |
| return -EUCLEAN; | |
| } | |
| if (path->slots[0] == 0) { | |
| inode->index_cnt = BTRFS_DIR_START_INDEX; | |
| return 0; | |
| } | |
| path->slots[0]--; | |
| leaf = path->nodes[0]; | |
| btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]); | |
| if (found_key.objectid != btrfs_ino(inode) || | |
| found_key.type != BTRFS_DIR_INDEX_KEY) { | |
| inode->index_cnt = BTRFS_DIR_START_INDEX; | |
| return 0; | |
| } | |
| inode->index_cnt = found_key.offset + 1; | |
| return 0; | |
| } | |
| static int btrfs_get_dir_last_index(struct btrfs_inode *dir, u64 *index) | |
| { | |
| int ret = 0; | |
| btrfs_inode_lock(dir, 0); | |
| if (dir->index_cnt == (u64)-1) { | |
| ret = btrfs_inode_delayed_dir_index_count(dir); | |
| if (ret) { | |
| ret = btrfs_set_inode_index_count(dir); | |
| if (ret) | |
| goto out; | |
| } | |
| } | |
| /* index_cnt is the index number of next new entry, so decrement it. */ | |
| *index = dir->index_cnt - 1; | |
| out: | |
| btrfs_inode_unlock(dir, 0); | |
| return ret; | |
| } | |
| /* | |
| * All this infrastructure exists because dir_emit can fault, and we are holding | |
| * the tree lock when doing readdir. For now just allocate a buffer and copy | |
| * our information into that, and then dir_emit from the buffer. This is | |
| * similar to what NFS does, only we don't keep the buffer around in pagecache | |
| * because I'm afraid I'll mess that up. Long term we need to make filldir do | |
| * copy_to_user_inatomic so we don't have to worry about page faulting under the | |
| * tree lock. | |
| */ | |
| static int btrfs_opendir(struct inode *inode, struct file *file) | |
| { | |
| struct btrfs_file_private *private; | |
| u64 last_index; | |
| int ret; | |
| ret = btrfs_get_dir_last_index(BTRFS_I(inode), &last_index); | |
| if (ret) | |
| return ret; | |
| private = kzalloc_obj(struct btrfs_file_private); | |
| if (!private) | |
| return -ENOMEM; | |
| private->last_index = last_index; | |
| private->filldir_buf = kzalloc(PAGE_SIZE, GFP_KERNEL); | |
| if (!private->filldir_buf) { | |
| kfree(private); | |
| return -ENOMEM; | |
| } | |
| file->private_data = private; | |
| return 0; | |
| } | |
| static loff_t btrfs_dir_llseek(struct file *file, loff_t offset, int whence) | |
| { | |
| struct btrfs_file_private *private = file->private_data; | |
| int ret; | |
| ret = btrfs_get_dir_last_index(BTRFS_I(file_inode(file)), | |
| &private->last_index); | |
| if (ret) | |
| return ret; | |
| return generic_file_llseek(file, offset, whence); | |
| } | |
| struct dir_entry { | |
| u64 ino; | |
| u64 offset; | |
| unsigned type; | |
| int name_len; | |
| }; | |
| static int btrfs_filldir(void *addr, int entries, struct dir_context *ctx) | |
| { | |
| while (entries--) { | |
| struct dir_entry *entry = addr; | |
| char *name = (char *)(entry + 1); | |
| ctx->pos = get_unaligned(&entry->offset); | |
| if (!dir_emit(ctx, name, get_unaligned(&entry->name_len), | |
| get_unaligned(&entry->ino), | |
| get_unaligned(&entry->type))) | |
| return 1; | |
| addr += sizeof(struct dir_entry) + | |
| get_unaligned(&entry->name_len); | |
| ctx->pos++; | |
| } | |
| return 0; | |
| } | |
| static int btrfs_real_readdir(struct file *file, struct dir_context *ctx) | |
| { | |
| struct inode *inode = file_inode(file); | |
| struct btrfs_root *root = BTRFS_I(inode)->root; | |
| struct btrfs_file_private *private = file->private_data; | |
| struct btrfs_dir_item *di; | |
| struct btrfs_key key; | |
| struct btrfs_key found_key; | |
| BTRFS_PATH_AUTO_FREE(path); | |
| void *addr; | |
| LIST_HEAD(ins_list); | |
| LIST_HEAD(del_list); | |
| int ret; | |
| char *name_ptr; | |
| int name_len; | |
| int entries = 0; | |
| int total_len = 0; | |
| bool put = false; | |
| struct btrfs_key location; | |
| if (!dir_emit_dots(file, ctx)) | |
| return 0; | |
| path = btrfs_alloc_path(); | |
| if (!path) | |
| return -ENOMEM; | |
| addr = private->filldir_buf; | |
| path->reada = READA_FORWARD; | |
| put = btrfs_readdir_get_delayed_items(BTRFS_I(inode), private->last_index, | |
| &ins_list, &del_list); | |
| again: | |
| key.type = BTRFS_DIR_INDEX_KEY; | |
| key.offset = ctx->pos; | |
| key.objectid = btrfs_ino(BTRFS_I(inode)); | |
| btrfs_for_each_slot(root, &key, &found_key, path, ret) { | |
| struct dir_entry *entry; | |
| struct extent_buffer *leaf = path->nodes[0]; | |
| u8 ftype; | |
| if (found_key.objectid != key.objectid) | |
| break; | |
| if (found_key.type != BTRFS_DIR_INDEX_KEY) | |
| break; | |
| if (found_key.offset < ctx->pos) | |
| continue; | |
| if (found_key.offset > private->last_index) | |
| break; | |
| if (btrfs_should_delete_dir_index(&del_list, found_key.offset)) | |
| continue; | |
| di = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_dir_item); | |
| name_len = btrfs_dir_name_len(leaf, di); | |
| if ((total_len + sizeof(struct dir_entry) + name_len) >= | |
| PAGE_SIZE) { | |
| btrfs_release_path(path); | |
| ret = btrfs_filldir(private->filldir_buf, entries, ctx); | |
| if (ret) | |
| goto nopos; | |
| addr = private->filldir_buf; | |
| entries = 0; | |
| total_len = 0; | |
| goto again; | |
| } | |
| ftype = btrfs_dir_flags_to_ftype(btrfs_dir_flags(leaf, di)); | |
| entry = addr; | |
| name_ptr = (char *)(entry + 1); | |
| read_extent_buffer(leaf, name_ptr, | |
| (unsigned long)(di + 1), name_len); | |
| put_unaligned(name_len, &entry->name_len); | |
| put_unaligned(fs_ftype_to_dtype(ftype), &entry->type); | |
| btrfs_dir_item_key_to_cpu(leaf, di, &location); | |
| put_unaligned(location.objectid, &entry->ino); | |
| put_unaligned(found_key.offset, &entry->offset); | |
| entries++; | |
| addr += sizeof(struct dir_entry) + name_len; | |
| total_len += sizeof(struct dir_entry) + name_len; | |
| } | |
| /* Catch error encountered during iteration */ | |
| if (ret < 0) | |
| goto err; | |
| btrfs_release_path(path); | |
| ret = btrfs_filldir(private->filldir_buf, entries, ctx); | |
| if (ret) | |
| goto nopos; | |
| if (btrfs_readdir_delayed_dir_index(ctx, &ins_list)) | |
| goto nopos; | |
| /* | |
| * Stop new entries from being returned after we return the last | |
| * entry. | |
| * | |
| * New directory entries are assigned a strictly increasing | |
| * offset. This means that new entries created during readdir | |
| * are *guaranteed* to be seen in the future by that readdir. | |
| * This has broken buggy programs which operate on names as | |
| * they're returned by readdir. Until we reuse freed offsets | |
| * we have this hack to stop new entries from being returned | |
| * under the assumption that they'll never reach this huge | |
| * offset. | |
| * | |
| * This is being careful not to overflow 32bit loff_t unless the | |
| * last entry requires it because doing so has broken 32bit apps | |
| * in the past. | |
| */ | |
| if (ctx->pos >= INT_MAX) | |
| ctx->pos = LLONG_MAX; | |
| else | |
| ctx->pos = INT_MAX; | |
| nopos: | |
| ret = 0; | |
| err: | |
| if (put) | |
| btrfs_readdir_put_delayed_items(BTRFS_I(inode), &ins_list, &del_list); | |
| return ret; | |
| } | |
| /* | |
| * This is somewhat expensive, updating the tree every time the | |
| * inode changes. But, it is most likely to find the inode in cache. | |
| * FIXME, needs more benchmarking...there are no reasons other than performance | |
| * to keep or drop this code. | |
| */ | |
| static int btrfs_dirty_inode(struct btrfs_inode *inode) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct btrfs_trans_handle *trans; | |
| int ret; | |
| if (test_bit(BTRFS_INODE_DUMMY, &inode->runtime_flags)) | |
| return 0; | |
| trans = btrfs_join_transaction(root); | |
| if (IS_ERR(trans)) | |
| return PTR_ERR(trans); | |
| ret = btrfs_update_inode(trans, inode); | |
| if (ret == -ENOSPC || ret == -EDQUOT) { | |
| /* whoops, lets try again with the full transaction */ | |
| btrfs_end_transaction(trans); | |
| trans = btrfs_start_transaction(root, 1); | |
| if (IS_ERR(trans)) | |
| return PTR_ERR(trans); | |
| ret = btrfs_update_inode(trans, inode); | |
| } | |
| btrfs_end_transaction(trans); | |
| if (inode->delayed_node) | |
| btrfs_balance_delayed_items(fs_info); | |
| return ret; | |
| } | |
| /* | |
| * We need our own ->update_time so that we can return error on ENOSPC for | |
| * updating the inode in the case of file write and mmap writes. | |
| */ | |
| static int btrfs_update_time(struct inode *inode, enum fs_update_time type, | |
| unsigned int flags) | |
| { | |
| struct btrfs_root *root = BTRFS_I(inode)->root; | |
| int dirty; | |
| if (btrfs_root_readonly(root)) | |
| return -EROFS; | |
| if (flags & IOCB_NOWAIT) | |
| return -EAGAIN; | |
| dirty = inode_update_time(inode, type, flags); | |
| if (dirty <= 0) | |
| return dirty; | |
| return btrfs_dirty_inode(BTRFS_I(inode)); | |
| } | |
| /* | |
| * helper to find a free sequence number in a given directory. This current | |
| * code is very simple, later versions will do smarter things in the btree | |
| */ | |
| int btrfs_set_inode_index(struct btrfs_inode *dir, u64 *index) | |
| { | |
| int ret = 0; | |
| if (dir->index_cnt == (u64)-1) { | |
| ret = btrfs_inode_delayed_dir_index_count(dir); | |
| if (ret) { | |
| ret = btrfs_set_inode_index_count(dir); | |
| if (ret) | |
| return ret; | |
| } | |
| } | |
| *index = dir->index_cnt; | |
| dir->index_cnt++; | |
| return ret; | |
| } | |
| static int btrfs_insert_inode_locked(struct inode *inode) | |
| { | |
| struct btrfs_iget_args args; | |
| args.ino = btrfs_ino(BTRFS_I(inode)); | |
| args.root = BTRFS_I(inode)->root; | |
| return insert_inode_locked4(inode, | |
| btrfs_inode_hash(inode->i_ino, BTRFS_I(inode)->root), | |
| btrfs_find_actor, &args); | |
| } | |
| int btrfs_new_inode_prepare(struct btrfs_new_inode_args *args, | |
| unsigned int *trans_num_items) | |
| { | |
| struct inode *dir = args->dir; | |
| struct inode *inode = args->inode; | |
| int ret; | |
| if (!args->orphan) { | |
| ret = fscrypt_setup_filename(dir, &args->dentry->d_name, 0, | |
| &args->fname); | |
| if (ret) | |
| return ret; | |
| } | |
| ret = posix_acl_create(dir, &inode->i_mode, &args->default_acl, &args->acl); | |
| if (ret) { | |
| fscrypt_free_filename(&args->fname); | |
| return ret; | |
| } | |
| /* 1 to add inode item */ | |
| *trans_num_items = 1; | |
| /* 1 to add compression property */ | |
| if (BTRFS_I(dir)->prop_compress) | |
| (*trans_num_items)++; | |
| /* 1 to add default ACL xattr */ | |
| if (args->default_acl) | |
| (*trans_num_items)++; | |
| /* 1 to add access ACL xattr */ | |
| if (args->acl) | |
| (*trans_num_items)++; | |
| #ifdef CONFIG_SECURITY | |
| /* 1 to add LSM xattr */ | |
| if (dir->i_security) | |
| (*trans_num_items)++; | |
| #endif | |
| if (args->orphan) { | |
| /* 1 to add orphan item */ | |
| (*trans_num_items)++; | |
| } else { | |
| /* | |
| * 1 to add dir item | |
| * 1 to add dir index | |
| * 1 to update parent inode item | |
| * | |
| * No need for 1 unit for the inode ref item because it is | |
| * inserted in a batch together with the inode item at | |
| * btrfs_create_new_inode(). | |
| */ | |
| *trans_num_items += 3; | |
| } | |
| return 0; | |
| } | |
| void btrfs_new_inode_args_destroy(struct btrfs_new_inode_args *args) | |
| { | |
| posix_acl_release(args->acl); | |
| posix_acl_release(args->default_acl); | |
| fscrypt_free_filename(&args->fname); | |
| } | |
| /* | |
| * Inherit flags from the parent inode. | |
| * | |
| * Currently only the compression flags and the cow flags are inherited. | |
| */ | |
| static void btrfs_inherit_iflags(struct btrfs_inode *inode, struct btrfs_inode *dir) | |
| { | |
| unsigned int flags; | |
| flags = dir->flags; | |
| if (flags & BTRFS_INODE_NOCOMPRESS) { | |
| inode->flags &= ~BTRFS_INODE_COMPRESS; | |
| inode->flags |= BTRFS_INODE_NOCOMPRESS; | |
| } else if (flags & BTRFS_INODE_COMPRESS) { | |
| inode->flags &= ~BTRFS_INODE_NOCOMPRESS; | |
| inode->flags |= BTRFS_INODE_COMPRESS; | |
| } | |
| if (flags & BTRFS_INODE_NODATACOW) { | |
| inode->flags |= BTRFS_INODE_NODATACOW; | |
| if (S_ISREG(inode->vfs_inode.i_mode)) | |
| inode->flags |= BTRFS_INODE_NODATASUM; | |
| } | |
| btrfs_sync_inode_flags_to_i_flags(inode); | |
| } | |
| int btrfs_create_new_inode(struct btrfs_trans_handle *trans, | |
| struct btrfs_new_inode_args *args) | |
| { | |
| struct timespec64 ts; | |
| struct inode *dir = args->dir; | |
| struct inode *inode = args->inode; | |
| const struct fscrypt_str *name = args->orphan ? NULL : &args->fname.disk_name; | |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(dir); | |
| struct btrfs_root *root; | |
| struct btrfs_inode_item *inode_item; | |
| struct btrfs_path *path; | |
| u64 objectid; | |
| struct btrfs_inode_ref *ref; | |
| struct btrfs_key key[2]; | |
| u32 sizes[2]; | |
| struct btrfs_item_batch batch; | |
| unsigned long ptr; | |
| int ret; | |
| bool xa_reserved = false; | |
| if (!args->orphan && !args->subvol) { | |
| /* | |
| * Before anything else, check if we can add the name to the | |
| * parent directory. We want to avoid a dir item overflow in | |
| * case we have an existing dir item due to existing name | |
| * hash collisions. We do this check here before we call | |
| * btrfs_add_link() down below so that we can avoid a | |
| * transaction abort (which could be exploited by malicious | |
| * users). | |
| * | |
| * For subvolumes we already do this in btrfs_mksubvol(). | |
| */ | |
| ret = btrfs_check_dir_item_collision(BTRFS_I(dir)->root, | |
| btrfs_ino(BTRFS_I(dir)), | |
| name); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| path = btrfs_alloc_path(); | |
| if (!path) | |
| return -ENOMEM; | |
| if (!args->subvol) | |
| BTRFS_I(inode)->root = btrfs_grab_root(BTRFS_I(dir)->root); | |
| root = BTRFS_I(inode)->root; | |
| ret = btrfs_init_file_extent_tree(BTRFS_I(inode)); | |
| if (ret) | |
| goto out; | |
| ret = btrfs_get_free_objectid(root, &objectid); | |
| if (ret) | |
| goto out; | |
| btrfs_set_inode_number(BTRFS_I(inode), objectid); | |
| ret = xa_reserve(&root->inodes, objectid, GFP_NOFS); | |
| if (ret) | |
| goto out; | |
| xa_reserved = true; | |
| if (args->orphan) { | |
| /* | |
| * O_TMPFILE, set link count to 0, so that after this point, we | |
| * fill in an inode item with the correct link count. | |
| */ | |
| set_nlink(inode, 0); | |
| } else { | |
| trace_btrfs_inode_request(dir); | |
| ret = btrfs_set_inode_index(BTRFS_I(dir), &BTRFS_I(inode)->dir_index); | |
| if (ret) | |
| goto out; | |
| } | |
| if (S_ISDIR(inode->i_mode)) | |
| BTRFS_I(inode)->index_cnt = BTRFS_DIR_START_INDEX; | |
| BTRFS_I(inode)->generation = trans->transid; | |
| inode->i_generation = BTRFS_I(inode)->generation; | |
| /* | |
| * We don't have any capability xattrs set here yet, shortcut any | |
| * queries for the xattrs here. If we add them later via the inode | |
| * security init path or any other path this flag will be cleared. | |
| */ | |
| set_bit(BTRFS_INODE_NO_CAP_XATTR, &BTRFS_I(inode)->runtime_flags); | |
| /* | |
| * Subvolumes don't inherit flags from their parent directory. | |
| * Originally this was probably by accident, but we probably can't | |
| * change it now without compatibility issues. | |
| */ | |
| if (!args->subvol) | |
| btrfs_inherit_iflags(BTRFS_I(inode), BTRFS_I(dir)); | |
| btrfs_set_inode_mapping_order(BTRFS_I(inode)); | |
| if (S_ISREG(inode->i_mode)) { | |
| if (btrfs_test_opt(fs_info, NODATASUM)) | |
| BTRFS_I(inode)->flags |= BTRFS_INODE_NODATASUM; | |
| if (btrfs_test_opt(fs_info, NODATACOW)) | |
| BTRFS_I(inode)->flags |= BTRFS_INODE_NODATACOW | | |
| BTRFS_INODE_NODATASUM; | |
| btrfs_update_inode_mapping_flags(BTRFS_I(inode)); | |
| } | |
| ret = btrfs_insert_inode_locked(inode); | |
| if (ret < 0) { | |
| if (!args->orphan) | |
| BTRFS_I(dir)->index_cnt--; | |
| goto out; | |
| } | |
| /* | |
| * We could have gotten an inode number from somebody who was fsynced | |
| * and then removed in this same transaction, so let's just set full | |
| * sync since it will be a full sync anyway and this will blow away the | |
| * old info in the log. | |
| */ | |
| btrfs_set_inode_full_sync(BTRFS_I(inode)); | |
| key[0].objectid = objectid; | |
| key[0].type = BTRFS_INODE_ITEM_KEY; | |
| key[0].offset = 0; | |
| sizes[0] = sizeof(struct btrfs_inode_item); | |
| if (!args->orphan) { | |
| /* | |
| * Start new inodes with an inode_ref. This is slightly more | |
| * efficient for small numbers of hard links since they will | |
| * be packed into one item. Extended refs will kick in if we | |
| * add more hard links than can fit in the ref item. | |
| */ | |
| key[1].objectid = objectid; | |
| key[1].type = BTRFS_INODE_REF_KEY; | |
| if (args->subvol) { | |
| key[1].offset = objectid; | |
| sizes[1] = 2 + sizeof(*ref); | |
| } else { | |
| key[1].offset = btrfs_ino(BTRFS_I(dir)); | |
| sizes[1] = name->len + sizeof(*ref); | |
| } | |
| } | |
| batch.keys = &key[0]; | |
| batch.data_sizes = &sizes[0]; | |
| batch.total_data_size = sizes[0] + (args->orphan ? 0 : sizes[1]); | |
| batch.nr = args->orphan ? 1 : 2; | |
| ret = btrfs_insert_empty_items(trans, root, path, &batch); | |
| if (unlikely(ret != 0)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto discard; | |
| } | |
| ts = simple_inode_init_ts(inode); | |
| BTRFS_I(inode)->i_otime_sec = ts.tv_sec; | |
| BTRFS_I(inode)->i_otime_nsec = ts.tv_nsec; | |
| /* | |
| * We're going to fill the inode item now, so at this point the inode | |
| * must be fully initialized. | |
| */ | |
| inode_item = btrfs_item_ptr(path->nodes[0], path->slots[0], | |
| struct btrfs_inode_item); | |
| memzero_extent_buffer(path->nodes[0], (unsigned long)inode_item, | |
| sizeof(*inode_item)); | |
| fill_inode_item(trans, path->nodes[0], inode_item, inode); | |
| if (!args->orphan) { | |
| ref = btrfs_item_ptr(path->nodes[0], path->slots[0] + 1, | |
| struct btrfs_inode_ref); | |
| ptr = (unsigned long)(ref + 1); | |
| if (args->subvol) { | |
| btrfs_set_inode_ref_name_len(path->nodes[0], ref, 2); | |
| btrfs_set_inode_ref_index(path->nodes[0], ref, 0); | |
| write_extent_buffer(path->nodes[0], "..", ptr, 2); | |
| } else { | |
| btrfs_set_inode_ref_name_len(path->nodes[0], ref, | |
| name->len); | |
| btrfs_set_inode_ref_index(path->nodes[0], ref, | |
| BTRFS_I(inode)->dir_index); | |
| write_extent_buffer(path->nodes[0], name->name, ptr, | |
| name->len); | |
| } | |
| } | |
| /* | |
| * We don't need the path anymore, plus inheriting properties, adding | |
| * ACLs, security xattrs, orphan item or adding the link, will result in | |
| * allocating yet another path. So just free our path. | |
| */ | |
| btrfs_free_path(path); | |
| path = NULL; | |
| if (args->subvol) { | |
| struct btrfs_inode *parent; | |
| /* | |
| * Subvolumes inherit properties from their parent subvolume, | |
| * not the directory they were created in. | |
| */ | |
| parent = btrfs_iget(BTRFS_FIRST_FREE_OBJECTID, BTRFS_I(dir)->root); | |
| if (IS_ERR(parent)) { | |
| ret = PTR_ERR(parent); | |
| } else { | |
| ret = btrfs_inode_inherit_props(trans, BTRFS_I(inode), | |
| parent); | |
| iput(&parent->vfs_inode); | |
| } | |
| } else { | |
| ret = btrfs_inode_inherit_props(trans, BTRFS_I(inode), | |
| BTRFS_I(dir)); | |
| } | |
| if (ret) { | |
| btrfs_err(fs_info, | |
| "error inheriting props for ino %llu (root %llu): %pe", | |
| btrfs_ino(BTRFS_I(inode)), btrfs_root_id(root), ERR_PTR(ret)); | |
| } | |
| /* | |
| * Subvolumes don't inherit ACLs or get passed to the LSM. This is | |
| * probably a bug. | |
| */ | |
| if (!args->subvol) { | |
| ret = btrfs_init_inode_security(trans, args); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto discard; | |
| } | |
| } | |
| ret = btrfs_add_inode_to_root(BTRFS_I(inode), false); | |
| if (WARN_ON(ret)) { | |
| /* Shouldn't happen, we used xa_reserve() before. */ | |
| btrfs_abort_transaction(trans, ret); | |
| goto discard; | |
| } | |
| trace_btrfs_inode_new(inode); | |
| btrfs_set_inode_last_trans(trans, BTRFS_I(inode)); | |
| btrfs_update_root_times(trans, root); | |
| if (args->orphan) { | |
| ret = btrfs_orphan_add(trans, BTRFS_I(inode)); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto discard; | |
| } | |
| } else { | |
| ret = btrfs_add_link(trans, BTRFS_I(dir), BTRFS_I(inode), name, | |
| false, BTRFS_I(inode)->dir_index); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto discard; | |
| } | |
| } | |
| return 0; | |
| discard: | |
| /* | |
| * discard_new_inode() calls iput(), but the caller owns the reference | |
| * to the inode. | |
| */ | |
| ihold(inode); | |
| discard_new_inode(inode); | |
| out: | |
| if (xa_reserved) | |
| xa_release(&root->inodes, objectid); | |
| btrfs_free_path(path); | |
| return ret; | |
| } | |
| /* | |
| * utility function to add 'inode' into 'parent_inode' with | |
| * a give name and a given sequence number. | |
| * if 'add_backref' is true, also insert a backref from the | |
| * inode to the parent directory. | |
| */ | |
| int btrfs_add_link(struct btrfs_trans_handle *trans, | |
| struct btrfs_inode *parent_inode, struct btrfs_inode *inode, | |
| const struct fscrypt_str *name, bool add_backref, u64 index) | |
| { | |
| int ret = 0; | |
| struct btrfs_key key; | |
| struct btrfs_root *root = parent_inode->root; | |
| u64 ino = btrfs_ino(inode); | |
| u64 parent_ino = btrfs_ino(parent_inode); | |
| if (unlikely(ino == BTRFS_FIRST_FREE_OBJECTID)) { | |
| memcpy(&key, &inode->root->root_key, sizeof(key)); | |
| } else { | |
| key.objectid = ino; | |
| key.type = BTRFS_INODE_ITEM_KEY; | |
| key.offset = 0; | |
| } | |
| if (unlikely(ino == BTRFS_FIRST_FREE_OBJECTID)) { | |
| ret = btrfs_add_root_ref(trans, key.objectid, | |
| btrfs_root_id(root), parent_ino, | |
| index, name); | |
| } else if (add_backref) { | |
| ret = btrfs_insert_inode_ref(trans, root, name, | |
| ino, parent_ino, index); | |
| } | |
| /* Nothing to clean up yet */ | |
| if (ret) | |
| return ret; | |
| ret = btrfs_insert_dir_item(trans, name, parent_inode, &key, | |
| btrfs_inode_type(inode), index); | |
| if (ret == -EEXIST || ret == -EOVERFLOW) | |
| goto fail_dir_item; | |
| else if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| return ret; | |
| } | |
| btrfs_i_size_write(parent_inode, parent_inode->vfs_inode.i_size + | |
| name->len * 2); | |
| inode_inc_iversion(&parent_inode->vfs_inode); | |
| update_time_after_link_or_unlink(parent_inode); | |
| ret = btrfs_update_inode(trans, parent_inode); | |
| if (ret) | |
| btrfs_abort_transaction(trans, ret); | |
| return ret; | |
| fail_dir_item: | |
| if (unlikely(ino == BTRFS_FIRST_FREE_OBJECTID)) { | |
| u64 local_index; | |
| int ret2; | |
| ret2 = btrfs_del_root_ref(trans, key.objectid, btrfs_root_id(root), | |
| parent_ino, &local_index, name); | |
| if (ret2) | |
| btrfs_abort_transaction(trans, ret2); | |
| } else if (add_backref) { | |
| int ret2; | |
| ret2 = btrfs_del_inode_ref(trans, root, name, ino, parent_ino, NULL); | |
| if (ret2) | |
| btrfs_abort_transaction(trans, ret2); | |
| } | |
| /* Return the original error code */ | |
| return ret; | |
| } | |
| static int btrfs_create_common(struct inode *dir, struct dentry *dentry, | |
| struct inode *inode) | |
| { | |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(dir); | |
| struct btrfs_root *root = BTRFS_I(dir)->root; | |
| struct btrfs_new_inode_args new_inode_args = { | |
| .dir = dir, | |
| .dentry = dentry, | |
| .inode = inode, | |
| }; | |
| unsigned int trans_num_items; | |
| struct btrfs_trans_handle *trans; | |
| int ret; | |
| ret = btrfs_new_inode_prepare(&new_inode_args, &trans_num_items); | |
| if (ret) | |
| goto out_inode; | |
| trans = btrfs_start_transaction(root, trans_num_items); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| goto out_new_inode_args; | |
| } | |
| ret = btrfs_create_new_inode(trans, &new_inode_args); | |
| if (!ret) { | |
| if (S_ISDIR(inode->i_mode)) | |
| inode->i_opflags |= IOP_FASTPERM_MAY_EXEC; | |
| d_instantiate_new(dentry, inode); | |
| } | |
| btrfs_end_transaction(trans); | |
| btrfs_btree_balance_dirty(fs_info); | |
| out_new_inode_args: | |
| btrfs_new_inode_args_destroy(&new_inode_args); | |
| out_inode: | |
| if (ret) | |
| iput(inode); | |
| return ret; | |
| } | |
| static int btrfs_mknod(struct mnt_idmap *idmap, struct inode *dir, | |
| struct dentry *dentry, umode_t mode, dev_t rdev) | |
| { | |
| struct inode *inode; | |
| inode = new_inode(dir->i_sb); | |
| if (!inode) | |
| return -ENOMEM; | |
| inode_init_owner(idmap, inode, dir, mode); | |
| inode->i_op = &btrfs_special_inode_operations; | |
| init_special_inode(inode, inode->i_mode, rdev); | |
| return btrfs_create_common(dir, dentry, inode); | |
| } | |
| static int btrfs_create(struct mnt_idmap *idmap, struct inode *dir, | |
| struct dentry *dentry, umode_t mode) | |
| { | |
| struct inode *inode; | |
| inode = new_inode(dir->i_sb); | |
| if (!inode) | |
| return -ENOMEM; | |
| inode_init_owner(idmap, inode, dir, mode); | |
| inode->i_fop = &btrfs_file_operations; | |
| inode->i_op = &btrfs_file_inode_operations; | |
| inode->i_mapping->a_ops = &btrfs_aops; | |
| return btrfs_create_common(dir, dentry, inode); | |
| } | |
| static int btrfs_link(struct dentry *old_dentry, struct inode *dir, | |
| struct dentry *dentry) | |
| { | |
| struct btrfs_trans_handle *trans = NULL; | |
| struct btrfs_root *root = BTRFS_I(dir)->root; | |
| struct inode *inode = d_inode(old_dentry); | |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(inode); | |
| struct fscrypt_name fname; | |
| u64 index; | |
| int ret; | |
| /* do not allow sys_link's with other subvols of the same device */ | |
| if (btrfs_root_id(root) != btrfs_root_id(BTRFS_I(inode)->root)) | |
| return -EXDEV; | |
| if (inode->i_nlink >= BTRFS_LINK_MAX) | |
| return -EMLINK; | |
| ret = fscrypt_setup_filename(dir, &dentry->d_name, 0, &fname); | |
| if (ret) | |
| goto fail; | |
| ret = btrfs_set_inode_index(BTRFS_I(dir), &index); | |
| if (ret) | |
| goto fail; | |
| /* | |
| * 2 items for inode and inode ref | |
| * 2 items for dir items | |
| * 1 item for parent inode | |
| * 1 item for orphan item deletion if O_TMPFILE | |
| */ | |
| trans = btrfs_start_transaction(root, inode->i_nlink ? 5 : 6); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| trans = NULL; | |
| goto fail; | |
| } | |
| /* There are several dir indexes for this inode, clear the cache. */ | |
| BTRFS_I(inode)->dir_index = 0ULL; | |
| inode_inc_iversion(inode); | |
| inode_set_ctime_current(inode); | |
| ret = btrfs_add_link(trans, BTRFS_I(dir), BTRFS_I(inode), | |
| &fname.disk_name, true, index); | |
| if (ret) | |
| goto fail; | |
| /* Link added now we update the inode item with the new link count. */ | |
| inc_nlink(inode); | |
| ret = btrfs_update_inode(trans, BTRFS_I(inode)); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto fail; | |
| } | |
| if (inode->i_nlink == 1) { | |
| /* | |
| * If the new hard link count is 1, it's a file created with the | |
| * open(2) O_TMPFILE flag. | |
| */ | |
| ret = btrfs_orphan_del(trans, BTRFS_I(inode)); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto fail; | |
| } | |
| } | |
| /* Grab reference for the new dentry passed to d_instantiate(). */ | |
| ihold(inode); | |
| d_instantiate(dentry, inode); | |
| btrfs_log_new_name(trans, old_dentry, NULL, 0, dentry->d_parent); | |
| fail: | |
| fscrypt_free_filename(&fname); | |
| if (trans) | |
| btrfs_end_transaction(trans); | |
| btrfs_btree_balance_dirty(fs_info); | |
| return ret; | |
| } | |
| static struct dentry *btrfs_mkdir(struct mnt_idmap *idmap, struct inode *dir, | |
| struct dentry *dentry, umode_t mode) | |
| { | |
| struct inode *inode; | |
| inode = new_inode(dir->i_sb); | |
| if (!inode) | |
| return ERR_PTR(-ENOMEM); | |
| inode_init_owner(idmap, inode, dir, mode); | |
| inode->i_op = &btrfs_dir_inode_operations; | |
| inode->i_fop = &btrfs_dir_file_operations; | |
| return ERR_PTR(btrfs_create_common(dir, dentry, inode)); | |
| } | |
| static noinline int uncompress_inline(struct btrfs_path *path, | |
| struct folio *folio, | |
| struct btrfs_file_extent_item *item) | |
| { | |
| int ret; | |
| struct extent_buffer *leaf = path->nodes[0]; | |
| const u32 blocksize = leaf->fs_info->sectorsize; | |
| char *tmp; | |
| size_t max_size; | |
| unsigned long inline_size; | |
| unsigned long ptr; | |
| int compress_type; | |
| compress_type = btrfs_file_extent_compression(leaf, item); | |
| max_size = btrfs_file_extent_ram_bytes(leaf, item); | |
| inline_size = btrfs_file_extent_inline_item_len(leaf, path->slots[0]); | |
| tmp = kmalloc(inline_size, GFP_NOFS); | |
| if (!tmp) | |
| return -ENOMEM; | |
| ptr = btrfs_file_extent_inline_start(item); | |
| read_extent_buffer(leaf, tmp, ptr, inline_size); | |
| max_size = min_t(unsigned long, blocksize, max_size); | |
| ret = btrfs_decompress(compress_type, tmp, folio, 0, inline_size, | |
| max_size); | |
| /* | |
| * decompression code contains a memset to fill in any space between the end | |
| * of the uncompressed data and the end of max_size in case the decompressed | |
| * data ends up shorter than ram_bytes. That doesn't cover the hole between | |
| * the end of an inline extent and the beginning of the next block, so we | |
| * cover that region here. | |
| */ | |
| if (max_size < blocksize) | |
| folio_zero_range(folio, max_size, blocksize - max_size); | |
| kfree(tmp); | |
| return ret; | |
| } | |
| static int read_inline_extent(struct btrfs_path *path, struct folio *folio) | |
| { | |
| const u32 blocksize = path->nodes[0]->fs_info->sectorsize; | |
| struct btrfs_file_extent_item *fi; | |
| void *kaddr; | |
| size_t copy_size; | |
| if (!folio || folio_test_uptodate(folio)) | |
| return 0; | |
| ASSERT(folio_pos(folio) == 0); | |
| fi = btrfs_item_ptr(path->nodes[0], path->slots[0], | |
| struct btrfs_file_extent_item); | |
| if (btrfs_file_extent_compression(path->nodes[0], fi) != BTRFS_COMPRESS_NONE) | |
| return uncompress_inline(path, folio, fi); | |
| copy_size = min_t(u64, blocksize, | |
| btrfs_file_extent_ram_bytes(path->nodes[0], fi)); | |
| kaddr = kmap_local_folio(folio, 0); | |
| read_extent_buffer(path->nodes[0], kaddr, | |
| btrfs_file_extent_inline_start(fi), copy_size); | |
| kunmap_local(kaddr); | |
| if (copy_size < blocksize) | |
| folio_zero_range(folio, copy_size, blocksize - copy_size); | |
| return 0; | |
| } | |
| /* | |
| * Lookup the first extent overlapping a range in a file. | |
| * | |
| * @inode: file to search in | |
| * @page: page to read extent data into if the extent is inline | |
| * @start: file offset | |
| * @len: length of range starting at @start | |
| * | |
| * Return the first &struct extent_map which overlaps the given range, reading | |
| * it from the B-tree and caching it if necessary. Note that there may be more | |
| * extents which overlap the given range after the returned extent_map. | |
| * | |
| * If @page is not NULL and the extent is inline, this also reads the extent | |
| * data directly into the page and marks the extent up to date in the io_tree. | |
| * | |
| * Return: ERR_PTR on error, non-NULL extent_map on success. | |
| */ | |
| struct extent_map *btrfs_get_extent(struct btrfs_inode *inode, | |
| struct folio *folio, u64 start, u64 len) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| int ret = 0; | |
| u64 extent_start = 0; | |
| u64 extent_end = 0; | |
| u64 objectid = btrfs_ino(inode); | |
| int extent_type = -1; | |
| struct btrfs_path *path = NULL; | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_file_extent_item *item; | |
| struct extent_buffer *leaf; | |
| struct btrfs_key found_key; | |
| struct extent_map *em = NULL; | |
| struct extent_map_tree *em_tree = &inode->extent_tree; | |
| read_lock(&em_tree->lock); | |
| em = btrfs_lookup_extent_mapping(em_tree, start, len); | |
| read_unlock(&em_tree->lock); | |
| if (em) { | |
| if (em->start > start || btrfs_extent_map_end(em) <= start) | |
| btrfs_free_extent_map(em); | |
| else if (em->disk_bytenr == EXTENT_MAP_INLINE && folio) | |
| btrfs_free_extent_map(em); | |
| else | |
| goto out; | |
| } | |
| em = btrfs_alloc_extent_map(); | |
| if (!em) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| em->start = EXTENT_MAP_HOLE; | |
| em->disk_bytenr = EXTENT_MAP_HOLE; | |
| em->len = (u64)-1; | |
| path = btrfs_alloc_path(); | |
| if (!path) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| /* Chances are we'll be called again, so go ahead and do readahead */ | |
| path->reada = READA_FORWARD; | |
| /* | |
| * The same explanation in load_free_space_cache applies here as well, | |
| * we only read when we're loading the free space cache, and at that | |
| * point the commit_root has everything we need. | |
| */ | |
| if (btrfs_is_free_space_inode(inode)) { | |
| path->search_commit_root = true; | |
| path->skip_locking = true; | |
| } | |
| ret = btrfs_lookup_file_extent(NULL, root, path, objectid, start, 0); | |
| if (ret < 0) { | |
| goto out; | |
| } else if (ret > 0) { | |
| if (path->slots[0] == 0) | |
| goto not_found; | |
| path->slots[0]--; | |
| ret = 0; | |
| } | |
| leaf = path->nodes[0]; | |
| item = btrfs_item_ptr(leaf, path->slots[0], | |
| struct btrfs_file_extent_item); | |
| btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]); | |
| if (found_key.objectid != objectid || | |
| found_key.type != BTRFS_EXTENT_DATA_KEY) { | |
| /* | |
| * If we backup past the first extent we want to move forward | |
| * and see if there is an extent in front of us, otherwise we'll | |
| * say there is a hole for our whole search range which can | |
| * cause problems. | |
| */ | |
| extent_end = start; | |
| goto next; | |
| } | |
| extent_type = btrfs_file_extent_type(leaf, item); | |
| extent_start = found_key.offset; | |
| extent_end = btrfs_file_extent_end(path); | |
| if (extent_type == BTRFS_FILE_EXTENT_REG || | |
| extent_type == BTRFS_FILE_EXTENT_PREALLOC) { | |
| /* Only regular file could have regular/prealloc extent */ | |
| if (unlikely(!S_ISREG(inode->vfs_inode.i_mode))) { | |
| ret = -EUCLEAN; | |
| btrfs_crit(fs_info, | |
| "regular/prealloc extent found for non-regular inode %llu", | |
| btrfs_ino(inode)); | |
| goto out; | |
| } | |
| trace_btrfs_get_extent_show_fi_regular(inode, leaf, item, | |
| extent_start); | |
| } else if (extent_type == BTRFS_FILE_EXTENT_INLINE) { | |
| trace_btrfs_get_extent_show_fi_inline(inode, leaf, item, | |
| path->slots[0], | |
| extent_start); | |
| } | |
| next: | |
| if (start >= extent_end) { | |
| path->slots[0]++; | |
| if (path->slots[0] >= btrfs_header_nritems(leaf)) { | |
| ret = btrfs_next_leaf(root, path); | |
| if (ret < 0) | |
| goto out; | |
| else if (ret > 0) | |
| goto not_found; | |
| leaf = path->nodes[0]; | |
| } | |
| btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]); | |
| if (found_key.objectid != objectid || | |
| found_key.type != BTRFS_EXTENT_DATA_KEY) | |
| goto not_found; | |
| if (start + len <= found_key.offset) | |
| goto not_found; | |
| if (start > found_key.offset) | |
| goto next; | |
| /* New extent overlaps with existing one */ | |
| em->start = start; | |
| em->len = found_key.offset - start; | |
| em->disk_bytenr = EXTENT_MAP_HOLE; | |
| goto insert; | |
| } | |
| btrfs_extent_item_to_extent_map(inode, path, item, em); | |
| if (extent_type == BTRFS_FILE_EXTENT_REG || | |
| extent_type == BTRFS_FILE_EXTENT_PREALLOC) { | |
| goto insert; | |
| } else if (extent_type == BTRFS_FILE_EXTENT_INLINE) { | |
| /* | |
| * Inline extent can only exist at file offset 0. This is | |
| * ensured by tree-checker and inline extent creation path. | |
| * Thus all members representing file offsets should be zero. | |
| */ | |
| ASSERT(extent_start == 0); | |
| ASSERT(em->start == 0); | |
| /* | |
| * btrfs_extent_item_to_extent_map() should have properly | |
| * initialized em members already. | |
| * | |
| * Other members are not utilized for inline extents. | |
| */ | |
| ASSERT(em->disk_bytenr == EXTENT_MAP_INLINE); | |
| ASSERT(em->len == fs_info->sectorsize); | |
| ret = read_inline_extent(path, folio); | |
| if (ret < 0) | |
| goto out; | |
| goto insert; | |
| } | |
| not_found: | |
| em->start = start; | |
| em->len = len; | |
| em->disk_bytenr = EXTENT_MAP_HOLE; | |
| insert: | |
| ret = 0; | |
| btrfs_release_path(path); | |
| if (unlikely(em->start > start || btrfs_extent_map_end(em) <= start)) { | |
| btrfs_err(fs_info, | |
| "bad extent! em: [%llu %llu] passed [%llu %llu]", | |
| em->start, em->len, start, len); | |
| ret = -EIO; | |
| goto out; | |
| } | |
| write_lock(&em_tree->lock); | |
| ret = btrfs_add_extent_mapping(inode, &em, start, len); | |
| write_unlock(&em_tree->lock); | |
| out: | |
| btrfs_free_path(path); | |
| trace_btrfs_get_extent(root, inode, em); | |
| if (ret) { | |
| btrfs_free_extent_map(em); | |
| return ERR_PTR(ret); | |
| } | |
| return em; | |
| } | |
| static bool btrfs_extent_readonly(struct btrfs_fs_info *fs_info, u64 bytenr) | |
| { | |
| struct btrfs_block_group *block_group; | |
| bool readonly = false; | |
| block_group = btrfs_lookup_block_group(fs_info, bytenr); | |
| if (!block_group || block_group->ro) | |
| readonly = true; | |
| if (block_group) | |
| btrfs_put_block_group(block_group); | |
| return readonly; | |
| } | |
| /* | |
| * Check if we can do nocow write into the range [@offset, @offset + @len) | |
| * | |
| * @offset: File offset | |
| * @len: The length to write, will be updated to the nocow writeable | |
| * range | |
| * @orig_start: (optional) Return the original file offset of the file extent | |
| * @orig_len: (optional) Return the original on-disk length of the file extent | |
| * @ram_bytes: (optional) Return the ram_bytes of the file extent | |
| * | |
| * Return: | |
| * >0 and update @len if we can do nocow write | |
| * 0 if we can't do nocow write | |
| * <0 if error happened | |
| * | |
| * NOTE: This only checks the file extents, caller is responsible to wait for | |
| * any ordered extents. | |
| */ | |
| noinline int can_nocow_extent(struct btrfs_inode *inode, u64 offset, u64 *len, | |
| struct btrfs_file_extent *file_extent, | |
| bool nowait) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct can_nocow_file_extent_args nocow_args = { 0 }; | |
| BTRFS_PATH_AUTO_FREE(path); | |
| int ret; | |
| struct extent_buffer *leaf; | |
| struct extent_io_tree *io_tree = &inode->io_tree; | |
| struct btrfs_file_extent_item *fi; | |
| struct btrfs_key key; | |
| int found_type; | |
| path = btrfs_alloc_path(); | |
| if (!path) | |
| return -ENOMEM; | |
| path->nowait = nowait; | |
| ret = btrfs_lookup_file_extent(NULL, root, path, btrfs_ino(inode), | |
| offset, 0); | |
| if (ret < 0) | |
| return ret; | |
| if (ret == 1) { | |
| if (path->slots[0] == 0) { | |
| /* Can't find the item, must COW. */ | |
| return 0; | |
| } | |
| path->slots[0]--; | |
| } | |
| ret = 0; | |
| leaf = path->nodes[0]; | |
| btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); | |
| if (key.objectid != btrfs_ino(inode) || | |
| key.type != BTRFS_EXTENT_DATA_KEY) { | |
| /* Not our file or wrong item type, must COW. */ | |
| return 0; | |
| } | |
| if (key.offset > offset) { | |
| /* Wrong offset, must COW. */ | |
| return 0; | |
| } | |
| if (btrfs_file_extent_end(path) <= offset) | |
| return 0; | |
| fi = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_file_extent_item); | |
| found_type = btrfs_file_extent_type(leaf, fi); | |
| nocow_args.start = offset; | |
| nocow_args.end = offset + *len - 1; | |
| nocow_args.free_path = true; | |
| ret = can_nocow_file_extent(path, &key, inode, &nocow_args); | |
| /* can_nocow_file_extent() has freed the path. */ | |
| path = NULL; | |
| if (ret != 1) { | |
| /* Treat errors as not being able to NOCOW. */ | |
| return 0; | |
| } | |
| if (btrfs_extent_readonly(fs_info, | |
| nocow_args.file_extent.disk_bytenr + | |
| nocow_args.file_extent.offset)) | |
| return 0; | |
| if (!(inode->flags & BTRFS_INODE_NODATACOW) && | |
| found_type == BTRFS_FILE_EXTENT_PREALLOC) { | |
| u64 range_end; | |
| range_end = round_up(offset + nocow_args.file_extent.num_bytes, | |
| root->fs_info->sectorsize) - 1; | |
| ret = btrfs_test_range_bit_exists(io_tree, offset, range_end, | |
| EXTENT_DELALLOC); | |
| if (ret) | |
| return -EAGAIN; | |
| } | |
| if (file_extent) | |
| memcpy(file_extent, &nocow_args.file_extent, sizeof(*file_extent)); | |
| *len = nocow_args.file_extent.num_bytes; | |
| return 1; | |
| } | |
| /* The callers of this must take lock_extent() */ | |
| struct extent_map *btrfs_create_io_em(struct btrfs_inode *inode, u64 start, | |
| const struct btrfs_file_extent *file_extent, | |
| int type) | |
| { | |
| struct extent_map *em; | |
| int ret; | |
| /* | |
| * Note the missing NOCOW type. | |
| * | |
| * For pure NOCOW writes, we should not create an io extent map, but | |
| * just reusing the existing one. | |
| * Only PREALLOC writes (NOCOW write into preallocated range) can | |
| * create an io extent map. | |
| */ | |
| ASSERT(type == BTRFS_ORDERED_PREALLOC || | |
| type == BTRFS_ORDERED_COMPRESSED || | |
| type == BTRFS_ORDERED_REGULAR); | |
| switch (type) { | |
| case BTRFS_ORDERED_PREALLOC: | |
| /* We're only referring part of a larger preallocated extent. */ | |
| ASSERT(file_extent->num_bytes <= file_extent->ram_bytes); | |
| break; | |
| case BTRFS_ORDERED_REGULAR: | |
| /* COW results a new extent matching our file extent size. */ | |
| ASSERT(file_extent->disk_num_bytes == file_extent->num_bytes); | |
| ASSERT(file_extent->ram_bytes == file_extent->num_bytes); | |
| /* Since it's a new extent, we should not have any offset. */ | |
| ASSERT(file_extent->offset == 0); | |
| break; | |
| case BTRFS_ORDERED_COMPRESSED: | |
| /* Must be compressed. */ | |
| ASSERT(file_extent->compression != BTRFS_COMPRESS_NONE); | |
| /* | |
| * Encoded write can make us to refer to part of the | |
| * uncompressed extent. | |
| */ | |
| ASSERT(file_extent->num_bytes <= file_extent->ram_bytes); | |
| break; | |
| } | |
| em = btrfs_alloc_extent_map(); | |
| if (!em) | |
| return ERR_PTR(-ENOMEM); | |
| em->start = start; | |
| em->len = file_extent->num_bytes; | |
| em->disk_bytenr = file_extent->disk_bytenr; | |
| em->disk_num_bytes = file_extent->disk_num_bytes; | |
| em->ram_bytes = file_extent->ram_bytes; | |
| em->generation = -1; | |
| em->offset = file_extent->offset; | |
| em->flags |= EXTENT_FLAG_PINNED; | |
| if (type == BTRFS_ORDERED_COMPRESSED) | |
| btrfs_extent_map_set_compression(em, file_extent->compression); | |
| ret = btrfs_replace_extent_map_range(inode, em, true); | |
| if (ret) { | |
| btrfs_free_extent_map(em); | |
| return ERR_PTR(ret); | |
| } | |
| /* em got 2 refs now, callers needs to do btrfs_free_extent_map once. */ | |
| return em; | |
| } | |
| /* | |
| * For release_folio() and invalidate_folio() we have a race window where | |
| * folio_end_writeback() is called but the subpage spinlock is not yet released. | |
| * If we continue to release/invalidate the page, we could cause use-after-free | |
| * for subpage spinlock. So this function is to spin and wait for subpage | |
| * spinlock. | |
| */ | |
| static void wait_subpage_spinlock(struct folio *folio) | |
| { | |
| struct btrfs_fs_info *fs_info = folio_to_fs_info(folio); | |
| struct btrfs_folio_state *bfs; | |
| if (!btrfs_is_subpage(fs_info, folio)) | |
| return; | |
| ASSERT(folio_test_private(folio) && folio_get_private(folio)); | |
| bfs = folio_get_private(folio); | |
| /* | |
| * This may look insane as we just acquire the spinlock and release it, | |
| * without doing anything. But we just want to make sure no one is | |
| * still holding the subpage spinlock. | |
| * And since the page is not dirty nor writeback, and we have page | |
| * locked, the only possible way to hold a spinlock is from the endio | |
| * function to clear page writeback. | |
| * | |
| * Here we just acquire the spinlock so that all existing callers | |
| * should exit and we're safe to release/invalidate the page. | |
| */ | |
| spin_lock_irq(&bfs->lock); | |
| spin_unlock_irq(&bfs->lock); | |
| } | |
| static int btrfs_launder_folio(struct folio *folio) | |
| { | |
| return btrfs_qgroup_free_data(folio_to_inode(folio), NULL, folio_pos(folio), | |
| folio_size(folio), NULL); | |
| } | |
| static bool __btrfs_release_folio(struct folio *folio, gfp_t gfp_flags) | |
| { | |
| if (try_release_extent_mapping(folio, gfp_flags)) { | |
| wait_subpage_spinlock(folio); | |
| clear_folio_extent_mapped(folio); | |
| return true; | |
| } | |
| return false; | |
| } | |
| static bool btrfs_release_folio(struct folio *folio, gfp_t gfp_flags) | |
| { | |
| if (folio_test_writeback(folio) || folio_test_dirty(folio)) | |
| return false; | |
| return __btrfs_release_folio(folio, gfp_flags); | |
| } | |
| #ifdef CONFIG_MIGRATION | |
| static int btrfs_migrate_folio(struct address_space *mapping, | |
| struct folio *dst, struct folio *src, | |
| enum migrate_mode mode) | |
| { | |
| int ret = filemap_migrate_folio(mapping, dst, src, mode); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| #else | |
| #define btrfs_migrate_folio NULL | |
| #endif | |
| static void btrfs_invalidate_folio(struct folio *folio, size_t offset, | |
| size_t length) | |
| { | |
| struct btrfs_inode *inode = folio_to_inode(folio); | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| struct extent_io_tree *tree = &inode->io_tree; | |
| struct extent_state *cached_state = NULL; | |
| u64 page_start = folio_pos(folio); | |
| u64 page_end = page_start + folio_size(folio) - 1; | |
| u64 cur; | |
| int inode_evicting = inode_state_read_once(&inode->vfs_inode) & I_FREEING; | |
| /* | |
| * We have folio locked so no new ordered extent can be created on this | |
| * page, nor bio can be submitted for this folio. | |
| * | |
| * But already submitted bio can still be finished on this folio. | |
| * Furthermore, endio function won't skip folio which has Ordered | |
| * already cleared, so it's possible for endio and | |
| * invalidate_folio to do the same ordered extent accounting twice | |
| * on one folio. | |
| * | |
| * So here we wait for any submitted bios to finish, so that we won't | |
| * do double ordered extent accounting on the same folio. | |
| */ | |
| folio_wait_writeback(folio); | |
| wait_subpage_spinlock(folio); | |
| /* | |
| * The invalidated blocks are going away; drop any fixup blocks among | |
| * them, data included, as they have no space reservation. | |
| */ | |
| btrfs_folio_clear_fixup_dirty(fs_info, folio, page_start + offset, length); | |
| /* | |
| * For subpage case, we have call sites like | |
| * btrfs_punch_hole_lock_range() which passes range not aligned to | |
| * sectorsize. | |
| * If the range doesn't cover the full folio, we don't need to and | |
| * shouldn't clear page extent mapped, as folio->private can still | |
| * record subpage dirty bits for other part of the range. | |
| * | |
| * For cases that invalidate the full folio even the range doesn't | |
| * cover the full folio, like invalidating the last folio, we're | |
| * still safe to wait for ordered extent to finish. | |
| */ | |
| if (!(offset == 0 && length == folio_size(folio))) { | |
| btrfs_release_folio(folio, GFP_NOFS); | |
| return; | |
| } | |
| if (!inode_evicting) | |
| btrfs_lock_extent(tree, page_start, page_end, &cached_state); | |
| cur = page_start; | |
| while (cur < page_end) { | |
| struct btrfs_ordered_extent *ordered; | |
| u64 range_end; | |
| u32 range_len; | |
| u32 extra_flags = 0; | |
| ordered = btrfs_lookup_first_ordered_range(inode, cur, | |
| page_end + 1 - cur); | |
| if (!ordered) { | |
| range_end = page_end; | |
| /* | |
| * No ordered extent covering this range, we are safe | |
| * to delete all extent states in the range. | |
| */ | |
| extra_flags = EXTENT_CLEAR_ALL_BITS; | |
| goto next; | |
| } | |
| if (ordered->file_offset > cur) { | |
| /* | |
| * There is a range between [cur, oe->file_offset) not | |
| * covered by any ordered extent. | |
| * We are safe to delete all extent states, and handle | |
| * the ordered extent in the next iteration. | |
| */ | |
| range_end = ordered->file_offset - 1; | |
| extra_flags = EXTENT_CLEAR_ALL_BITS; | |
| goto next; | |
| } | |
| range_end = min(ordered->file_offset + ordered->num_bytes - 1, | |
| page_end); | |
| ASSERT(range_end + 1 - cur < U32_MAX); | |
| range_len = range_end + 1 - cur; | |
| /* | |
| * If the range is not dirty, the range has been submitted and | |
| * since we have waited for the writeback, endio has been | |
| * executed, thus we must skip the range to avoid double | |
| * accounting for the ordered extent. | |
| */ | |
| if (!btrfs_folio_test_dirty(fs_info, folio, cur, range_len)) | |
| goto next; | |
| /* | |
| * The range is dirty meaning it has not been submitted. | |
| * Here we need to truncate the OE range as the range will never | |
| * be submitted. | |
| * | |
| * IO on this page will never be started, so we need to account | |
| * for any ordered extents now. Don't clear EXTENT_DELALLOC_NEW | |
| * here, must leave that up for the ordered extent completion. | |
| * | |
| * This will also unlock the range for incoming | |
| * btrfs_finish_ordered_io(). | |
| */ | |
| if (!inode_evicting) | |
| btrfs_clear_extent_bit(tree, cur, range_end, | |
| EXTENT_DELALLOC | | |
| EXTENT_LOCKED | EXTENT_DO_ACCOUNTING | | |
| EXTENT_DEFRAG, &cached_state); | |
| btrfs_mark_ordered_extent_truncated(ordered, cur - ordered->file_offset); | |
| /* | |
| * If the ordered extent has finished, we're safe to delete all | |
| * the extent states of the range, otherwise | |
| * btrfs_finish_ordered_io() will get executed by endio for | |
| * other pages, so we can't delete extent states. | |
| */ | |
| if (btrfs_dec_test_ordered_pending(inode, &ordered, | |
| cur, range_end + 1 - cur)) { | |
| btrfs_finish_ordered_io(ordered); | |
| /* | |
| * The ordered extent has finished, now we're again | |
| * safe to delete all extent states of the range. | |
| */ | |
| extra_flags = EXTENT_CLEAR_ALL_BITS; | |
| } | |
| next: | |
| if (ordered) | |
| btrfs_put_ordered_extent(ordered); | |
| /* | |
| * Qgroup reserved space handler | |
| * Sector(s) here will be either: | |
| * | |
| * 1) Already written to disk or bio already finished | |
| * Then its QGROUP_RESERVED bit in io_tree is already cleared. | |
| * Qgroup will be handled by its qgroup_record then. | |
| * btrfs_qgroup_free_data() call will do nothing here. | |
| * | |
| * 2) Not written to disk yet | |
| * Then btrfs_qgroup_free_data() call will clear the | |
| * QGROUP_RESERVED bit of its io_tree, and free the qgroup | |
| * reserved data space. | |
| * Since the IO will never happen for this page. | |
| */ | |
| btrfs_qgroup_free_data(inode, NULL, cur, range_end + 1 - cur, NULL); | |
| if (!inode_evicting) | |
| btrfs_clear_extent_bit(tree, cur, range_end, EXTENT_LOCKED | | |
| EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING | | |
| EXTENT_DEFRAG | extra_flags, | |
| &cached_state); | |
| cur = range_end + 1; | |
| } | |
| btrfs_folio_clear_dirty(fs_info, folio, page_start, folio_size(folio)); | |
| btrfs_clear_folio_dirty_tag(folio); | |
| if (!inode_evicting) | |
| __btrfs_release_folio(folio, GFP_NOFS); | |
| clear_folio_extent_mapped(folio); | |
| } | |
| static int btrfs_truncate(struct btrfs_inode *inode, bool skip_writeback) | |
| { | |
| struct btrfs_truncate_control control = { | |
| .inode = inode, | |
| .ino = btrfs_ino(inode), | |
| .min_type = BTRFS_EXTENT_DATA_KEY, | |
| .clear_extent_range = true, | |
| .new_size = inode->vfs_inode.i_size, | |
| }; | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct btrfs_block_rsv rsv; | |
| int ret; | |
| struct btrfs_trans_handle *trans; | |
| const u64 min_size = btrfs_calc_metadata_size(fs_info, 1); | |
| const u64 lock_start = round_down(inode->vfs_inode.i_size, fs_info->sectorsize); | |
| const u64 i_size_up = round_up(inode->vfs_inode.i_size, fs_info->sectorsize); | |
| /* Our inode is locked and the i_size can't be changed concurrently. */ | |
| btrfs_assert_inode_locked(inode); | |
| if (!skip_writeback) { | |
| ret = btrfs_wait_ordered_range(inode, lock_start, (u64)-1); | |
| if (ret) | |
| return ret; | |
| } | |
| /* | |
| * Yes ladies and gentlemen, this is indeed ugly. We have a couple of | |
| * things going on here: | |
| * | |
| * 1) We need to reserve space to update our inode. | |
| * | |
| * 2) We need to have something to cache all the space that is going to | |
| * be free'd up by the truncate operation, but also have some slack | |
| * space reserved in case it uses space during the truncate (thank you | |
| * very much snapshotting). | |
| * | |
| * And we need these to be separate. The fact is we can use a lot of | |
| * space doing the truncate, and we have no earthly idea how much space | |
| * we will use, so we need the truncate reservation to be separate so it | |
| * doesn't end up using space reserved for updating the inode. We also | |
| * need to be able to stop the transaction and start a new one, which | |
| * means we need to be able to update the inode several times, and we | |
| * have no idea of knowing how many times that will be, so we can't just | |
| * reserve 1 item for the entirety of the operation, so that has to be | |
| * done separately as well. | |
| * | |
| * So that leaves us with | |
| * | |
| * 1) rsv - for the truncate reservation, which we will steal from the | |
| * transaction reservation. | |
| * 2) fs_info->trans_block_rsv - this will have 1 items worth left for | |
| * updating the inode. | |
| */ | |
| btrfs_init_metadata_block_rsv(fs_info, &rsv, BTRFS_BLOCK_RSV_TEMP); | |
| rsv.size = min_size; | |
| rsv.failfast = true; | |
| /* | |
| * 1 for the truncate slack space | |
| * 1 for updating the inode. | |
| */ | |
| trans = btrfs_start_transaction(root, 2); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| goto out; | |
| } | |
| /* Migrate the slack space for the truncate to our reserve */ | |
| ret = btrfs_block_rsv_migrate(&fs_info->trans_block_rsv, &rsv, | |
| min_size, false); | |
| /* | |
| * We have reserved 2 metadata units when we started the transaction and | |
| * min_size matches 1 unit, so this should never fail, but if it does, | |
| * it's not critical we just fail truncation. | |
| */ | |
| if (WARN_ON(ret)) { | |
| btrfs_end_transaction(trans); | |
| goto out; | |
| } | |
| trans->block_rsv = &rsv; | |
| while (1) { | |
| struct extent_state *cached_state = NULL; | |
| btrfs_lock_extent(&inode->io_tree, lock_start, (u64)-1, &cached_state); | |
| /* | |
| * We want to drop from the next block forward in case this new | |
| * size is not block aligned since we will be keeping the last | |
| * block of the extent just the way it is. | |
| */ | |
| btrfs_drop_extent_map_range(inode, i_size_up, (u64)-1, false); | |
| ret = btrfs_truncate_inode_items(trans, root, &control); | |
| inode_sub_bytes(&inode->vfs_inode, control.sub_bytes); | |
| btrfs_inode_safe_disk_i_size_write(inode, control.last_size); | |
| btrfs_unlock_extent(&inode->io_tree, lock_start, (u64)-1, &cached_state); | |
| trans->block_rsv = &fs_info->trans_block_rsv; | |
| if (ret != -ENOSPC && ret != -EAGAIN) | |
| break; | |
| ret = btrfs_update_inode(trans, inode); | |
| if (ret) | |
| break; | |
| btrfs_end_transaction(trans); | |
| btrfs_btree_balance_dirty(fs_info); | |
| trans = btrfs_start_transaction(root, 2); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| trans = NULL; | |
| break; | |
| } | |
| btrfs_block_rsv_release(fs_info, &rsv, -1, NULL); | |
| ret = btrfs_block_rsv_migrate(&fs_info->trans_block_rsv, | |
| &rsv, min_size, false); | |
| /* | |
| * We have reserved 2 metadata units when we started the | |
| * transaction and min_size matches 1 unit, so this should never | |
| * fail, but if it does, it's not critical we just fail truncation. | |
| */ | |
| if (WARN_ON(ret)) | |
| break; | |
| trans->block_rsv = &rsv; | |
| } | |
| /* | |
| * We can't call btrfs_truncate_block inside a trans handle as we could | |
| * deadlock with freeze, if we got BTRFS_NEED_TRUNCATE_BLOCK then we | |
| * know we've truncated everything except the last little bit, and can | |
| * do btrfs_truncate_block and then update the disk_i_size. | |
| */ | |
| if (ret == BTRFS_NEED_TRUNCATE_BLOCK) { | |
| btrfs_end_transaction(trans); | |
| btrfs_btree_balance_dirty(fs_info); | |
| ret = btrfs_truncate_block(inode, inode->vfs_inode.i_size, | |
| inode->vfs_inode.i_size, (u64)-1); | |
| if (ret) | |
| goto out; | |
| trans = btrfs_start_transaction(root, 1); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| goto out; | |
| } | |
| btrfs_inode_safe_disk_i_size_write(inode, 0); | |
| } | |
| if (trans) { | |
| int ret2; | |
| trans->block_rsv = &fs_info->trans_block_rsv; | |
| ret2 = btrfs_update_inode(trans, inode); | |
| if (ret2 && !ret) | |
| ret = ret2; | |
| ret2 = btrfs_end_transaction(trans); | |
| if (ret2 && !ret) | |
| ret = ret2; | |
| btrfs_btree_balance_dirty(fs_info); | |
| } | |
| out: | |
| btrfs_block_rsv_release(fs_info, &rsv, (u64)-1, NULL); | |
| /* | |
| * So if we truncate and then write and fsync we normally would just | |
| * write the extents that changed, which is a problem if we need to | |
| * first truncate that entire inode. So set this flag so we write out | |
| * all of the extents in the inode to the sync log so we're completely | |
| * safe. | |
| * | |
| * If no extents were dropped or trimmed we don't need to force the next | |
| * fsync to truncate all the inode's items from the log and re-log them | |
| * all. This means the truncate operation did not change the file size, | |
| * or changed it to a smaller size but there was only an implicit hole | |
| * between the old i_size and the new i_size, and there were no prealloc | |
| * extents beyond i_size to drop. | |
| */ | |
| if (control.extents_found > 0) | |
| btrfs_set_inode_full_sync(inode); | |
| return ret; | |
| } | |
| struct inode *btrfs_new_subvol_inode(struct mnt_idmap *idmap, | |
| struct inode *dir) | |
| { | |
| struct inode *inode; | |
| inode = new_inode(dir->i_sb); | |
| if (inode) { | |
| /* | |
| * Subvolumes don't inherit the sgid bit or the parent's gid if | |
| * the parent's sgid bit is set. This is probably a bug. | |
| */ | |
| inode_init_owner(idmap, inode, NULL, | |
| S_IFDIR | (~current_umask() & S_IRWXUGO)); | |
| inode->i_op = &btrfs_dir_inode_operations; | |
| inode->i_fop = &btrfs_dir_file_operations; | |
| } | |
| return inode; | |
| } | |
| struct inode *btrfs_alloc_inode(struct super_block *sb) | |
| { | |
| struct btrfs_fs_info *fs_info = btrfs_sb(sb); | |
| struct btrfs_inode *ei; | |
| struct inode *inode; | |
| ei = alloc_inode_sb(sb, btrfs_inode_cachep, GFP_KERNEL); | |
| if (!ei) | |
| return NULL; | |
| ei->root = NULL; | |
| ei->generation = 0; | |
| ei->last_trans = 0; | |
| ei->last_sub_trans = 0; | |
| ei->logged_trans = 0; | |
| ei->delalloc_bytes = 0; | |
| /* new_delalloc_bytes and last_dir_index_offset are in a union. */ | |
| ei->new_delalloc_bytes = 0; | |
| ei->defrag_bytes = 0; | |
| ei->disk_i_size = 0; | |
| ei->flags = 0; | |
| ei->ro_flags = 0; | |
| /* | |
| * ->index_cnt will be properly initialized later when creating a new | |
| * inode (btrfs_create_new_inode()) or when reading an existing inode | |
| * from disk (btrfs_read_locked_inode()). | |
| */ | |
| ei->csum_bytes = 0; | |
| ei->dir_index = 0; | |
| ei->last_unlink_trans = 0; | |
| ei->last_reflink_trans = 0; | |
| ei->last_log_commit = 0; | |
| spin_lock_init(&ei->lock); | |
| ei->outstanding_extents = 0; | |
| if (sb->s_magic != BTRFS_TEST_MAGIC) | |
| btrfs_init_metadata_block_rsv(fs_info, &ei->block_rsv, | |
| BTRFS_BLOCK_RSV_DELALLOC); | |
| ei->runtime_flags = 0; | |
| ei->prop_compress = BTRFS_COMPRESS_NONE; | |
| ei->defrag_compress = BTRFS_COMPRESS_NONE; | |
| ei->delayed_node = NULL; | |
| ei->i_otime_sec = 0; | |
| ei->i_otime_nsec = 0; | |
| inode = &ei->vfs_inode; | |
| btrfs_extent_map_tree_init(&ei->extent_tree); | |
| /* This io tree sets the valid inode. */ | |
| btrfs_extent_io_tree_init(fs_info, &ei->io_tree, IO_TREE_INODE_IO); | |
| ei->io_tree.inode = ei; | |
| ei->file_extent_tree = NULL; | |
| mutex_init(&ei->log_mutex); | |
| spin_lock_init(&ei->ordered_tree_lock); | |
| ei->ordered_tree = RB_ROOT; | |
| ei->ordered_tree_last = NULL; | |
| INIT_LIST_HEAD(&ei->delalloc_inodes); | |
| INIT_LIST_HEAD(&ei->delayed_iput); | |
| init_rwsem(&ei->i_mmap_lock); | |
| return inode; | |
| } | |
| #ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS | |
| void btrfs_test_destroy_inode(struct inode *inode) | |
| { | |
| btrfs_drop_extent_map_range(BTRFS_I(inode), 0, (u64)-1, false); | |
| kfree(BTRFS_I(inode)->file_extent_tree); | |
| kmem_cache_free(btrfs_inode_cachep, BTRFS_I(inode)); | |
| } | |
| #endif | |
| void btrfs_free_inode(struct inode *inode) | |
| { | |
| kfree(BTRFS_I(inode)->file_extent_tree); | |
| kmem_cache_free(btrfs_inode_cachep, BTRFS_I(inode)); | |
| } | |
| void btrfs_destroy_inode(struct inode *vfs_inode) | |
| { | |
| struct btrfs_ordered_extent *ordered; | |
| struct btrfs_inode *inode = BTRFS_I(vfs_inode); | |
| struct btrfs_root *root = inode->root; | |
| bool freespace_inode; | |
| WARN_ON(!hlist_empty(&vfs_inode->i_dentry)); | |
| WARN_ON(vfs_inode->i_data.nrpages); | |
| WARN_ON(inode->block_rsv.reserved); | |
| WARN_ON(inode->block_rsv.size); | |
| WARN_ON(inode->outstanding_extents); | |
| if (!S_ISDIR(vfs_inode->i_mode)) { | |
| WARN_ON(inode->delalloc_bytes); | |
| WARN_ON(inode->new_delalloc_bytes); | |
| WARN_ON(inode->csum_bytes); | |
| } | |
| if (!root || !btrfs_is_data_reloc_root(root)) | |
| WARN_ON(inode->defrag_bytes); | |
| /* | |
| * This can happen where we create an inode, but somebody else also | |
| * created the same inode and we need to destroy the one we already | |
| * created. | |
| */ | |
| if (!root) | |
| return; | |
| /* | |
| * If this is a free space inode do not take the ordered extents lockdep | |
| * map. | |
| */ | |
| freespace_inode = btrfs_is_free_space_inode(inode); | |
| while (1) { | |
| ordered = btrfs_lookup_first_ordered_extent(inode, (u64)-1); | |
| if (!ordered) | |
| break; | |
| else { | |
| btrfs_err(root->fs_info, | |
| "found ordered extent %llu %llu on inode cleanup", | |
| ordered->file_offset, ordered->num_bytes); | |
| if (!freespace_inode) | |
| btrfs_lockdep_acquire(root->fs_info, btrfs_ordered_extent); | |
| btrfs_remove_ordered_extent(ordered); | |
| btrfs_put_ordered_extent(ordered); | |
| btrfs_put_ordered_extent(ordered); | |
| } | |
| } | |
| btrfs_qgroup_check_reserved_leak(inode); | |
| btrfs_del_inode_from_root(inode); | |
| btrfs_drop_extent_map_range(inode, 0, (u64)-1, false); | |
| btrfs_inode_clear_file_extent_range(inode, 0, (u64)-1); | |
| btrfs_put_root(inode->root); | |
| } | |
| int btrfs_drop_inode(struct inode *inode) | |
| { | |
| struct btrfs_root *root = BTRFS_I(inode)->root; | |
| if (root == NULL) | |
| return 1; | |
| /* the snap/subvol tree is on deleting */ | |
| if (btrfs_root_refs(&root->root_item) == 0) | |
| return 1; | |
| else | |
| return inode_generic_drop(inode); | |
| } | |
| static void init_once(void *foo) | |
| { | |
| struct btrfs_inode *ei = foo; | |
| inode_init_once(&ei->vfs_inode); | |
| } | |
| void __cold btrfs_destroy_cachep(void) | |
| { | |
| /* | |
| * Make sure all delayed rcu free inodes are flushed before we | |
| * destroy cache. | |
| */ | |
| rcu_barrier(); | |
| kmem_cache_destroy(btrfs_inode_cachep); | |
| } | |
| int __init btrfs_init_cachep(void) | |
| { | |
| btrfs_inode_cachep = kmem_cache_create("btrfs_inode", | |
| sizeof(struct btrfs_inode), 0, | |
| SLAB_RECLAIM_ACCOUNT | SLAB_ACCOUNT, | |
| init_once); | |
| if (!btrfs_inode_cachep) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| static int btrfs_getattr(struct mnt_idmap *idmap, | |
| const struct path *path, struct kstat *stat, | |
| u32 request_mask, unsigned int flags) | |
| { | |
| u64 delalloc_bytes; | |
| u64 inode_bytes; | |
| struct inode *inode = d_inode(path->dentry); | |
| u32 blocksize = btrfs_sb(inode->i_sb)->sectorsize; | |
| u32 bi_flags = BTRFS_I(inode)->flags; | |
| u32 bi_ro_flags = BTRFS_I(inode)->ro_flags; | |
| stat->result_mask |= STATX_BTIME; | |
| stat->btime.tv_sec = BTRFS_I(inode)->i_otime_sec; | |
| stat->btime.tv_nsec = BTRFS_I(inode)->i_otime_nsec; | |
| if (bi_flags & BTRFS_INODE_APPEND) | |
| stat->attributes |= STATX_ATTR_APPEND; | |
| if (bi_flags & BTRFS_INODE_COMPRESS) | |
| stat->attributes |= STATX_ATTR_COMPRESSED; | |
| if (bi_flags & BTRFS_INODE_IMMUTABLE) | |
| stat->attributes |= STATX_ATTR_IMMUTABLE; | |
| if (bi_flags & BTRFS_INODE_NODUMP) | |
| stat->attributes |= STATX_ATTR_NODUMP; | |
| if (bi_ro_flags & BTRFS_INODE_RO_VERITY) | |
| stat->attributes |= STATX_ATTR_VERITY; | |
| stat->attributes_mask |= (STATX_ATTR_APPEND | | |
| STATX_ATTR_COMPRESSED | | |
| STATX_ATTR_IMMUTABLE | | |
| STATX_ATTR_NODUMP); | |
| generic_fillattr(idmap, request_mask, inode, stat); | |
| stat->dev = BTRFS_I(inode)->root->anon_dev; | |
| stat->subvol = btrfs_root_id(BTRFS_I(inode)->root); | |
| stat->result_mask |= STATX_SUBVOL; | |
| spin_lock(&BTRFS_I(inode)->lock); | |
| delalloc_bytes = S_ISREG(inode->i_mode) ? | |
| BTRFS_I(inode)->new_delalloc_bytes : 0; | |
| inode_bytes = inode_get_bytes(inode); | |
| spin_unlock(&BTRFS_I(inode)->lock); | |
| stat->blocks = (ALIGN(inode_bytes, blocksize) + | |
| ALIGN(delalloc_bytes, blocksize)) >> SECTOR_SHIFT; | |
| return 0; | |
| } | |
| static int btrfs_rename_exchange(struct inode *old_dir, | |
| struct dentry *old_dentry, | |
| struct inode *new_dir, | |
| struct dentry *new_dentry) | |
| { | |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(old_dir); | |
| struct btrfs_trans_handle *trans; | |
| unsigned int trans_num_items; | |
| struct btrfs_root *root = BTRFS_I(old_dir)->root; | |
| struct btrfs_root *dest = BTRFS_I(new_dir)->root; | |
| struct inode *new_inode = new_dentry->d_inode; | |
| struct inode *old_inode = old_dentry->d_inode; | |
| struct btrfs_rename_ctx old_rename_ctx; | |
| struct btrfs_rename_ctx new_rename_ctx; | |
| u64 old_ino = btrfs_ino(BTRFS_I(old_inode)); | |
| u64 new_ino = btrfs_ino(BTRFS_I(new_inode)); | |
| u64 old_idx = 0; | |
| u64 new_idx = 0; | |
| int ret; | |
| int ret2; | |
| bool need_abort = false; | |
| bool logs_pinned = false; | |
| struct fscrypt_name old_fname, new_fname; | |
| struct fscrypt_str *old_name, *new_name; | |
| /* | |
| * For non-subvolumes allow exchange only within one subvolume, in the | |
| * same inode namespace. Two subvolumes (represented as directory) can | |
| * be exchanged as they're a logical link and have a fixed inode number. | |
| */ | |
| if (root != dest && | |
| (old_ino != BTRFS_FIRST_FREE_OBJECTID || | |
| new_ino != BTRFS_FIRST_FREE_OBJECTID)) | |
| return -EXDEV; | |
| ret = fscrypt_setup_filename(old_dir, &old_dentry->d_name, 0, &old_fname); | |
| if (ret) | |
| return ret; | |
| ret = fscrypt_setup_filename(new_dir, &new_dentry->d_name, 0, &new_fname); | |
| if (ret) { | |
| fscrypt_free_filename(&old_fname); | |
| return ret; | |
| } | |
| old_name = &old_fname.disk_name; | |
| new_name = &new_fname.disk_name; | |
| /* close the race window with snapshot create/destroy ioctl */ | |
| if (old_ino == BTRFS_FIRST_FREE_OBJECTID || | |
| new_ino == BTRFS_FIRST_FREE_OBJECTID) | |
| down_read(&fs_info->subvol_sem); | |
| /* | |
| * For each inode: | |
| * 1 to remove old dir item | |
| * 1 to remove old dir index | |
| * 1 to add new dir item | |
| * 1 to add new dir index | |
| * 1 to update parent inode | |
| * | |
| * If the parents are the same, we only need to account for one | |
| */ | |
| trans_num_items = (old_dir == new_dir ? 9 : 10); | |
| if (old_ino == BTRFS_FIRST_FREE_OBJECTID) { | |
| /* | |
| * 1 to remove old root ref | |
| * 1 to remove old root backref | |
| * 1 to add new root ref | |
| * 1 to add new root backref | |
| */ | |
| trans_num_items += 4; | |
| } else { | |
| /* | |
| * 1 to update inode item | |
| * 1 to remove old inode ref | |
| * 1 to add new inode ref | |
| */ | |
| trans_num_items += 3; | |
| } | |
| if (new_ino == BTRFS_FIRST_FREE_OBJECTID) | |
| trans_num_items += 4; | |
| else | |
| trans_num_items += 3; | |
| trans = btrfs_start_transaction(root, trans_num_items); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| goto out_notrans; | |
| } | |
| if (dest != root) { | |
| ret = btrfs_record_root_in_trans(trans, dest); | |
| if (ret) | |
| goto out_fail; | |
| } | |
| /* | |
| * We need to find a free sequence number both in the source and | |
| * in the destination directory for the exchange. | |
| */ | |
| ret = btrfs_set_inode_index(BTRFS_I(new_dir), &old_idx); | |
| if (ret) | |
| goto out_fail; | |
| ret = btrfs_set_inode_index(BTRFS_I(old_dir), &new_idx); | |
| if (ret) | |
| goto out_fail; | |
| BTRFS_I(old_inode)->dir_index = 0ULL; | |
| BTRFS_I(new_inode)->dir_index = 0ULL; | |
| /* Reference for the source. */ | |
| if (old_ino == BTRFS_FIRST_FREE_OBJECTID) { | |
| /* force full log commit if subvolume involved. */ | |
| btrfs_set_log_full_commit(trans); | |
| } else { | |
| ret = btrfs_insert_inode_ref(trans, dest, new_name, old_ino, | |
| btrfs_ino(BTRFS_I(new_dir)), | |
| old_idx); | |
| if (ret) | |
| goto out_fail; | |
| need_abort = true; | |
| } | |
| /* And now for the dest. */ | |
| if (new_ino == BTRFS_FIRST_FREE_OBJECTID) { | |
| /* force full log commit if subvolume involved. */ | |
| btrfs_set_log_full_commit(trans); | |
| } else { | |
| ret = btrfs_insert_inode_ref(trans, root, old_name, new_ino, | |
| btrfs_ino(BTRFS_I(old_dir)), | |
| new_idx); | |
| if (ret) { | |
| if (unlikely(need_abort)) | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } | |
| } | |
| /* Update inode version and ctime/mtime. */ | |
| inode_inc_iversion(old_dir); | |
| inode_inc_iversion(new_dir); | |
| inode_inc_iversion(old_inode); | |
| inode_inc_iversion(new_inode); | |
| simple_rename_timestamp(old_dir, old_dentry, new_dir, new_dentry); | |
| if (old_ino != BTRFS_FIRST_FREE_OBJECTID && | |
| new_ino != BTRFS_FIRST_FREE_OBJECTID) { | |
| /* | |
| * If we are renaming in the same directory (and it's not for | |
| * root entries) pin the log early to prevent any concurrent | |
| * task from logging the directory after we removed the old | |
| * entries and before we add the new entries, otherwise that | |
| * task can sync a log without any entry for the inodes we are | |
| * renaming and therefore replaying that log, if a power failure | |
| * happens after syncing the log, would result in deleting the | |
| * inodes. | |
| * | |
| * If the rename affects two different directories, we want to | |
| * make sure the that there's no log commit that contains | |
| * updates for only one of the directories but not for the | |
| * other. | |
| * | |
| * If we are renaming an entry for a root, we don't care about | |
| * log updates since we called btrfs_set_log_full_commit(). | |
| */ | |
| btrfs_pin_log_trans(root); | |
| btrfs_pin_log_trans(dest); | |
| logs_pinned = true; | |
| } | |
| if (old_dentry->d_parent != new_dentry->d_parent) { | |
| btrfs_record_unlink_dir(trans, BTRFS_I(old_dir), | |
| BTRFS_I(old_inode), true); | |
| btrfs_record_unlink_dir(trans, BTRFS_I(new_dir), | |
| BTRFS_I(new_inode), true); | |
| } | |
| /* src is a subvolume */ | |
| if (old_ino == BTRFS_FIRST_FREE_OBJECTID) { | |
| ret = btrfs_unlink_subvol(trans, BTRFS_I(old_dir), old_dentry); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } | |
| } else { /* src is an inode */ | |
| ret = __btrfs_unlink_inode(trans, BTRFS_I(old_dir), | |
| BTRFS_I(old_dentry->d_inode), | |
| old_name, &old_rename_ctx); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } | |
| ret = btrfs_update_inode(trans, BTRFS_I(old_inode)); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } | |
| } | |
| /* dest is a subvolume */ | |
| if (new_ino == BTRFS_FIRST_FREE_OBJECTID) { | |
| ret = btrfs_unlink_subvol(trans, BTRFS_I(new_dir), new_dentry); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } | |
| } else { /* dest is an inode */ | |
| ret = __btrfs_unlink_inode(trans, BTRFS_I(new_dir), | |
| BTRFS_I(new_dentry->d_inode), | |
| new_name, &new_rename_ctx); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } | |
| ret = btrfs_update_inode(trans, BTRFS_I(new_inode)); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } | |
| } | |
| ret = btrfs_add_link(trans, BTRFS_I(new_dir), BTRFS_I(old_inode), | |
| new_name, false, old_idx); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } | |
| ret = btrfs_add_link(trans, BTRFS_I(old_dir), BTRFS_I(new_inode), | |
| old_name, false, new_idx); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } | |
| if (old_inode->i_nlink == 1) | |
| BTRFS_I(old_inode)->dir_index = old_idx; | |
| if (new_inode->i_nlink == 1) | |
| BTRFS_I(new_inode)->dir_index = new_idx; | |
| /* | |
| * Do the log updates for all inodes. | |
| * | |
| * If either entry is for a root we don't need to update the logs since | |
| * we've called btrfs_set_log_full_commit() before. | |
| */ | |
| if (logs_pinned) { | |
| btrfs_log_new_name(trans, old_dentry, BTRFS_I(old_dir), | |
| old_rename_ctx.index, new_dentry->d_parent); | |
| btrfs_log_new_name(trans, new_dentry, BTRFS_I(new_dir), | |
| new_rename_ctx.index, old_dentry->d_parent); | |
| } | |
| out_fail: | |
| if (logs_pinned) { | |
| btrfs_end_log_trans(root); | |
| btrfs_end_log_trans(dest); | |
| } | |
| ret2 = btrfs_end_transaction(trans); | |
| ret = ret ? ret : ret2; | |
| out_notrans: | |
| if (new_ino == BTRFS_FIRST_FREE_OBJECTID || | |
| old_ino == BTRFS_FIRST_FREE_OBJECTID) | |
| up_read(&fs_info->subvol_sem); | |
| fscrypt_free_filename(&new_fname); | |
| fscrypt_free_filename(&old_fname); | |
| return ret; | |
| } | |
| static struct inode *new_whiteout_inode(struct mnt_idmap *idmap, | |
| struct inode *dir) | |
| { | |
| struct inode *inode; | |
| inode = new_inode(dir->i_sb); | |
| if (inode) { | |
| inode_init_owner(idmap, inode, dir, | |
| S_IFCHR | WHITEOUT_MODE); | |
| inode->i_op = &btrfs_special_inode_operations; | |
| init_special_inode(inode, inode->i_mode, WHITEOUT_DEV); | |
| } | |
| return inode; | |
| } | |
| static int btrfs_rename(struct mnt_idmap *idmap, | |
| struct inode *old_dir, struct dentry *old_dentry, | |
| struct inode *new_dir, struct dentry *new_dentry, | |
| unsigned int flags) | |
| { | |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(old_dir); | |
| struct btrfs_new_inode_args whiteout_args = { | |
| .dir = old_dir, | |
| .dentry = old_dentry, | |
| }; | |
| struct btrfs_trans_handle *trans; | |
| unsigned int trans_num_items; | |
| struct btrfs_root *root = BTRFS_I(old_dir)->root; | |
| struct btrfs_root *dest = BTRFS_I(new_dir)->root; | |
| struct inode *new_inode = d_inode(new_dentry); | |
| struct inode *old_inode = d_inode(old_dentry); | |
| struct btrfs_rename_ctx rename_ctx; | |
| u64 index = 0; | |
| int ret; | |
| int ret2; | |
| u64 old_ino = btrfs_ino(BTRFS_I(old_inode)); | |
| struct fscrypt_name old_fname, new_fname; | |
| bool logs_pinned = false; | |
| if (btrfs_ino(BTRFS_I(new_dir)) == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID) | |
| return -EPERM; | |
| /* we only allow rename subvolume link between subvolumes */ | |
| if (old_ino != BTRFS_FIRST_FREE_OBJECTID && root != dest) | |
| return -EXDEV; | |
| if (old_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID || | |
| (new_inode && btrfs_ino(BTRFS_I(new_inode)) == BTRFS_FIRST_FREE_OBJECTID)) | |
| return -ENOTEMPTY; | |
| if (S_ISDIR(old_inode->i_mode) && new_inode && | |
| new_inode->i_size > BTRFS_EMPTY_DIR_SIZE) | |
| return -ENOTEMPTY; | |
| ret = fscrypt_setup_filename(old_dir, &old_dentry->d_name, 0, &old_fname); | |
| if (ret) | |
| return ret; | |
| ret = fscrypt_setup_filename(new_dir, &new_dentry->d_name, 0, &new_fname); | |
| if (ret) { | |
| fscrypt_free_filename(&old_fname); | |
| return ret; | |
| } | |
| /* check for collisions, even if the name isn't there */ | |
| ret = btrfs_check_dir_item_collision(dest, new_dir->i_ino, &new_fname.disk_name); | |
| if (ret) { | |
| if (ret == -EEXIST) { | |
| /* we shouldn't get | |
| * eexist without a new_inode */ | |
| if (WARN_ON(!new_inode)) { | |
| goto out_fscrypt_names; | |
| } | |
| } else { | |
| /* maybe -EOVERFLOW */ | |
| goto out_fscrypt_names; | |
| } | |
| } | |
| ret = 0; | |
| /* | |
| * we're using rename to replace one file with another. Start IO on it | |
| * now so we don't add too much work to the end of the transaction | |
| */ | |
| if (new_inode && S_ISREG(old_inode->i_mode) && new_inode->i_size) | |
| filemap_flush(old_inode->i_mapping); | |
| if (flags & RENAME_WHITEOUT) { | |
| whiteout_args.inode = new_whiteout_inode(idmap, old_dir); | |
| if (!whiteout_args.inode) { | |
| ret = -ENOMEM; | |
| goto out_fscrypt_names; | |
| } | |
| ret = btrfs_new_inode_prepare(&whiteout_args, &trans_num_items); | |
| if (ret) | |
| goto out_whiteout_inode; | |
| } else { | |
| /* 1 to update the old parent inode. */ | |
| trans_num_items = 1; | |
| } | |
| if (old_ino == BTRFS_FIRST_FREE_OBJECTID) { | |
| /* Close the race window with snapshot create/destroy ioctl */ | |
| down_read(&fs_info->subvol_sem); | |
| /* | |
| * 1 to remove old root ref | |
| * 1 to remove old root backref | |
| * 1 to add new root ref | |
| * 1 to add new root backref | |
| */ | |
| trans_num_items += 4; | |
| } else { | |
| /* | |
| * 1 to update inode | |
| * 1 to remove old inode ref | |
| * 1 to add new inode ref | |
| */ | |
| trans_num_items += 3; | |
| } | |
| /* | |
| * 1 to remove old dir item | |
| * 1 to remove old dir index | |
| * 1 to add new dir item | |
| * 1 to add new dir index | |
| */ | |
| trans_num_items += 4; | |
| /* 1 to update new parent inode if it's not the same as the old parent */ | |
| if (new_dir != old_dir) | |
| trans_num_items++; | |
| if (new_inode) { | |
| /* | |
| * 1 to update inode | |
| * 1 to remove inode ref | |
| * 1 to remove dir item | |
| * 1 to remove dir index | |
| * 1 to possibly add orphan item | |
| */ | |
| trans_num_items += 5; | |
| } | |
| trans = btrfs_start_transaction(root, trans_num_items); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| goto out_notrans; | |
| } | |
| if (dest != root) { | |
| ret = btrfs_record_root_in_trans(trans, dest); | |
| if (ret) | |
| goto out_fail; | |
| } | |
| ret = btrfs_set_inode_index(BTRFS_I(new_dir), &index); | |
| if (ret) | |
| goto out_fail; | |
| BTRFS_I(old_inode)->dir_index = 0ULL; | |
| if (unlikely(old_ino == BTRFS_FIRST_FREE_OBJECTID)) { | |
| /* force full log commit if subvolume involved. */ | |
| btrfs_set_log_full_commit(trans); | |
| } else { | |
| ret = btrfs_insert_inode_ref(trans, dest, &new_fname.disk_name, | |
| old_ino, btrfs_ino(BTRFS_I(new_dir)), | |
| index); | |
| if (ret) | |
| goto out_fail; | |
| } | |
| inode_inc_iversion(old_dir); | |
| inode_inc_iversion(new_dir); | |
| inode_inc_iversion(old_inode); | |
| simple_rename_timestamp(old_dir, old_dentry, new_dir, new_dentry); | |
| if (old_ino != BTRFS_FIRST_FREE_OBJECTID) { | |
| /* | |
| * If we are renaming in the same directory (and it's not a | |
| * root entry) pin the log to prevent any concurrent task from | |
| * logging the directory after we removed the old entry and | |
| * before we add the new entry, otherwise that task can sync | |
| * a log without any entry for the inode we are renaming and | |
| * therefore replaying that log, if a power failure happens | |
| * after syncing the log, would result in deleting the inode. | |
| * | |
| * If the rename affects two different directories, we want to | |
| * make sure the that there's no log commit that contains | |
| * updates for only one of the directories but not for the | |
| * other. | |
| * | |
| * If we are renaming an entry for a root, we don't care about | |
| * log updates since we called btrfs_set_log_full_commit(). | |
| */ | |
| btrfs_pin_log_trans(root); | |
| btrfs_pin_log_trans(dest); | |
| logs_pinned = true; | |
| } | |
| if (old_dentry->d_parent != new_dentry->d_parent) | |
| btrfs_record_unlink_dir(trans, BTRFS_I(old_dir), | |
| BTRFS_I(old_inode), true); | |
| if (unlikely(old_ino == BTRFS_FIRST_FREE_OBJECTID)) { | |
| ret = btrfs_unlink_subvol(trans, BTRFS_I(old_dir), old_dentry); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } | |
| } else { | |
| ret = __btrfs_unlink_inode(trans, BTRFS_I(old_dir), | |
| BTRFS_I(d_inode(old_dentry)), | |
| &old_fname.disk_name, &rename_ctx); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } | |
| ret = btrfs_update_inode(trans, BTRFS_I(old_inode)); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } | |
| } | |
| if (new_inode) { | |
| inode_inc_iversion(new_inode); | |
| if (unlikely(btrfs_ino(BTRFS_I(new_inode)) == | |
| BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)) { | |
| ret = btrfs_unlink_subvol(trans, BTRFS_I(new_dir), new_dentry); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } | |
| BUG_ON(new_inode->i_nlink == 0); | |
| } else { | |
| ret = btrfs_unlink_inode(trans, BTRFS_I(new_dir), | |
| BTRFS_I(d_inode(new_dentry)), | |
| &new_fname.disk_name); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } | |
| } | |
| if (new_inode->i_nlink == 0) { | |
| ret = btrfs_orphan_add(trans, | |
| BTRFS_I(d_inode(new_dentry))); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } | |
| } | |
| } | |
| ret = btrfs_add_link(trans, BTRFS_I(new_dir), BTRFS_I(old_inode), | |
| &new_fname.disk_name, false, index); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } | |
| if (old_inode->i_nlink == 1) | |
| BTRFS_I(old_inode)->dir_index = index; | |
| if (logs_pinned) | |
| btrfs_log_new_name(trans, old_dentry, BTRFS_I(old_dir), | |
| rename_ctx.index, new_dentry->d_parent); | |
| if (flags & RENAME_WHITEOUT) { | |
| ret = btrfs_create_new_inode(trans, &whiteout_args); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_fail; | |
| } else { | |
| unlock_new_inode(whiteout_args.inode); | |
| iput(whiteout_args.inode); | |
| whiteout_args.inode = NULL; | |
| } | |
| } | |
| out_fail: | |
| if (logs_pinned) { | |
| btrfs_end_log_trans(root); | |
| btrfs_end_log_trans(dest); | |
| } | |
| ret2 = btrfs_end_transaction(trans); | |
| ret = ret ? ret : ret2; | |
| out_notrans: | |
| if (old_ino == BTRFS_FIRST_FREE_OBJECTID) | |
| up_read(&fs_info->subvol_sem); | |
| if (flags & RENAME_WHITEOUT) | |
| btrfs_new_inode_args_destroy(&whiteout_args); | |
| out_whiteout_inode: | |
| if (flags & RENAME_WHITEOUT) | |
| iput(whiteout_args.inode); | |
| out_fscrypt_names: | |
| fscrypt_free_filename(&old_fname); | |
| fscrypt_free_filename(&new_fname); | |
| return ret; | |
| } | |
| static int btrfs_rename2(struct mnt_idmap *idmap, struct inode *old_dir, | |
| struct dentry *old_dentry, struct inode *new_dir, | |
| struct dentry *new_dentry, unsigned int flags) | |
| { | |
| int ret; | |
| if (flags & ~(RENAME_NOREPLACE | RENAME_EXCHANGE | RENAME_WHITEOUT)) | |
| return -EINVAL; | |
| if (flags & RENAME_EXCHANGE) | |
| ret = btrfs_rename_exchange(old_dir, old_dentry, new_dir, | |
| new_dentry); | |
| else | |
| ret = btrfs_rename(idmap, old_dir, old_dentry, new_dir, | |
| new_dentry, flags); | |
| btrfs_btree_balance_dirty(BTRFS_I(new_dir)->root->fs_info); | |
| return ret; | |
| } | |
| struct btrfs_delalloc_work { | |
| struct inode *inode; | |
| struct completion completion; | |
| struct list_head list; | |
| struct btrfs_work work; | |
| }; | |
| static void btrfs_run_delalloc_work(struct btrfs_work *work) | |
| { | |
| struct btrfs_delalloc_work *delalloc_work; | |
| struct inode *inode; | |
| delalloc_work = container_of(work, struct btrfs_delalloc_work, | |
| work); | |
| inode = delalloc_work->inode; | |
| filemap_flush(inode->i_mapping); | |
| if (test_bit(BTRFS_INODE_HAS_ASYNC_EXTENT, | |
| &BTRFS_I(inode)->runtime_flags)) | |
| filemap_flush(inode->i_mapping); | |
| iput(inode); | |
| complete(&delalloc_work->completion); | |
| } | |
| static struct btrfs_delalloc_work *btrfs_alloc_delalloc_work(struct inode *inode) | |
| { | |
| struct btrfs_delalloc_work *work; | |
| work = kmalloc_obj(*work, GFP_NOFS); | |
| if (!work) | |
| return NULL; | |
| init_completion(&work->completion); | |
| INIT_LIST_HEAD(&work->list); | |
| work->inode = inode; | |
| btrfs_init_work(&work->work, btrfs_run_delalloc_work, NULL); | |
| return work; | |
| } | |
| /* | |
| * some fairly slow code that needs optimization. This walks the list | |
| * of all the inodes with pending delalloc and forces them to disk. | |
| */ | |
| static int start_delalloc_inodes(struct btrfs_root *root, long *nr_to_write, | |
| bool snapshot, bool in_reclaim_context) | |
| { | |
| struct btrfs_delalloc_work *work, *next; | |
| LIST_HEAD(works); | |
| LIST_HEAD(splice); | |
| int ret = 0; | |
| mutex_lock(&root->delalloc_mutex); | |
| spin_lock(&root->delalloc_lock); | |
| list_splice_init(&root->delalloc_inodes, &splice); | |
| while (!list_empty(&splice)) { | |
| struct btrfs_inode *inode; | |
| struct inode *tmp_inode; | |
| inode = list_first_entry(&splice, struct btrfs_inode, delalloc_inodes); | |
| list_move_tail(&inode->delalloc_inodes, &root->delalloc_inodes); | |
| if (in_reclaim_context && | |
| test_bit(BTRFS_INODE_NO_DELALLOC_FLUSH, &inode->runtime_flags)) | |
| continue; | |
| tmp_inode = igrab(&inode->vfs_inode); | |
| if (!tmp_inode) { | |
| cond_resched_lock(&root->delalloc_lock); | |
| continue; | |
| } | |
| spin_unlock(&root->delalloc_lock); | |
| if (snapshot) | |
| set_bit(BTRFS_INODE_SNAPSHOT_FLUSH, &inode->runtime_flags); | |
| if (nr_to_write == NULL) { | |
| work = btrfs_alloc_delalloc_work(tmp_inode); | |
| if (!work) { | |
| iput(tmp_inode); | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| list_add_tail(&work->list, &works); | |
| btrfs_queue_work(root->fs_info->flush_workers, | |
| &work->work); | |
| } else { | |
| ret = filemap_flush_nr(tmp_inode->i_mapping, | |
| nr_to_write); | |
| btrfs_add_delayed_iput(inode); | |
| if (ret || *nr_to_write <= 0) | |
| goto out; | |
| } | |
| cond_resched(); | |
| spin_lock(&root->delalloc_lock); | |
| } | |
| spin_unlock(&root->delalloc_lock); | |
| out: | |
| list_for_each_entry_safe(work, next, &works, list) { | |
| list_del_init(&work->list); | |
| wait_for_completion(&work->completion); | |
| kfree(work); | |
| } | |
| if (!list_empty(&splice)) { | |
| spin_lock(&root->delalloc_lock); | |
| list_splice_tail(&splice, &root->delalloc_inodes); | |
| spin_unlock(&root->delalloc_lock); | |
| } | |
| mutex_unlock(&root->delalloc_mutex); | |
| return ret; | |
| } | |
| int btrfs_start_delalloc_snapshot(struct btrfs_root *root, bool in_reclaim_context) | |
| { | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| if (unlikely(BTRFS_FS_ERROR(fs_info))) | |
| return -EROFS; | |
| return start_delalloc_inodes(root, NULL, true, in_reclaim_context); | |
| } | |
| int btrfs_start_delalloc_roots(struct btrfs_fs_info *fs_info, long nr, | |
| bool in_reclaim_context) | |
| { | |
| long *nr_to_write = nr == LONG_MAX ? NULL : &nr; | |
| struct btrfs_root *root; | |
| LIST_HEAD(splice); | |
| int ret; | |
| if (unlikely(BTRFS_FS_ERROR(fs_info))) | |
| return -EROFS; | |
| mutex_lock(&fs_info->delalloc_root_mutex); | |
| spin_lock(&fs_info->delalloc_root_lock); | |
| list_splice_init(&fs_info->delalloc_roots, &splice); | |
| while (!list_empty(&splice)) { | |
| root = list_first_entry(&splice, struct btrfs_root, | |
| delalloc_root); | |
| root = btrfs_grab_root(root); | |
| BUG_ON(!root); | |
| list_move_tail(&root->delalloc_root, | |
| &fs_info->delalloc_roots); | |
| spin_unlock(&fs_info->delalloc_root_lock); | |
| ret = start_delalloc_inodes(root, nr_to_write, false, | |
| in_reclaim_context); | |
| btrfs_put_root(root); | |
| if (ret < 0 || nr <= 0) | |
| goto out; | |
| spin_lock(&fs_info->delalloc_root_lock); | |
| } | |
| spin_unlock(&fs_info->delalloc_root_lock); | |
| ret = 0; | |
| out: | |
| if (!list_empty(&splice)) { | |
| spin_lock(&fs_info->delalloc_root_lock); | |
| list_splice_tail(&splice, &fs_info->delalloc_roots); | |
| spin_unlock(&fs_info->delalloc_root_lock); | |
| } | |
| mutex_unlock(&fs_info->delalloc_root_mutex); | |
| return ret; | |
| } | |
| static int btrfs_symlink(struct mnt_idmap *idmap, struct inode *dir, | |
| struct dentry *dentry, const char *symname) | |
| { | |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(dir); | |
| struct btrfs_trans_handle *trans; | |
| struct btrfs_root *root = BTRFS_I(dir)->root; | |
| struct btrfs_path *path; | |
| struct btrfs_key key; | |
| struct inode *inode; | |
| struct btrfs_new_inode_args new_inode_args = { | |
| .dir = dir, | |
| .dentry = dentry, | |
| }; | |
| unsigned int trans_num_items; | |
| int ret; | |
| int name_len; | |
| int datasize; | |
| unsigned long ptr; | |
| struct btrfs_file_extent_item *ei; | |
| struct extent_buffer *leaf; | |
| name_len = strlen(symname); | |
| /* | |
| * Symlinks utilize uncompressed inline extent data, which should not | |
| * reach block size. | |
| */ | |
| if (name_len > BTRFS_MAX_INLINE_DATA_SIZE(fs_info) || | |
| name_len >= fs_info->sectorsize) | |
| return -ENAMETOOLONG; | |
| inode = new_inode(dir->i_sb); | |
| if (!inode) | |
| return -ENOMEM; | |
| inode_init_owner(idmap, inode, dir, S_IFLNK | S_IRWXUGO); | |
| inode->i_op = &btrfs_symlink_inode_operations; | |
| inode_nohighmem(inode); | |
| inode->i_mapping->a_ops = &btrfs_aops; | |
| btrfs_i_size_write(BTRFS_I(inode), name_len); | |
| inode_set_bytes(inode, name_len); | |
| new_inode_args.inode = inode; | |
| ret = btrfs_new_inode_prepare(&new_inode_args, &trans_num_items); | |
| if (ret) | |
| goto out_inode; | |
| /* 1 additional item for the inline extent */ | |
| trans_num_items++; | |
| trans = btrfs_start_transaction(root, trans_num_items); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| goto out_new_inode_args; | |
| } | |
| ret = btrfs_create_new_inode(trans, &new_inode_args); | |
| if (ret) | |
| goto out; | |
| path = btrfs_alloc_path(); | |
| if (unlikely(!path)) { | |
| ret = -ENOMEM; | |
| btrfs_abort_transaction(trans, ret); | |
| discard_new_inode(inode); | |
| inode = NULL; | |
| goto out; | |
| } | |
| key.objectid = btrfs_ino(BTRFS_I(inode)); | |
| key.type = BTRFS_EXTENT_DATA_KEY; | |
| key.offset = 0; | |
| datasize = btrfs_file_extent_calc_inline_size(name_len); | |
| ret = btrfs_insert_empty_item(trans, root, path, &key, datasize); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| btrfs_free_path(path); | |
| discard_new_inode(inode); | |
| inode = NULL; | |
| goto out; | |
| } | |
| leaf = path->nodes[0]; | |
| ei = btrfs_item_ptr(leaf, path->slots[0], | |
| struct btrfs_file_extent_item); | |
| btrfs_set_file_extent_generation(leaf, ei, trans->transid); | |
| btrfs_set_file_extent_type(leaf, ei, | |
| BTRFS_FILE_EXTENT_INLINE); | |
| btrfs_set_file_extent_encryption(leaf, ei, 0); | |
| btrfs_set_file_extent_compression(leaf, ei, 0); | |
| btrfs_set_file_extent_other_encoding(leaf, ei, 0); | |
| btrfs_set_file_extent_ram_bytes(leaf, ei, name_len); | |
| ptr = btrfs_file_extent_inline_start(ei); | |
| write_extent_buffer(leaf, symname, ptr, name_len); | |
| btrfs_free_path(path); | |
| d_instantiate_new(dentry, inode); | |
| ret = 0; | |
| out: | |
| btrfs_end_transaction(trans); | |
| btrfs_btree_balance_dirty(fs_info); | |
| out_new_inode_args: | |
| btrfs_new_inode_args_destroy(&new_inode_args); | |
| out_inode: | |
| if (ret) | |
| iput(inode); | |
| return ret; | |
| } | |
| static struct btrfs_trans_handle *insert_prealloc_file_extent( | |
| struct btrfs_trans_handle *trans_in, | |
| struct btrfs_inode *inode, | |
| struct btrfs_key *ins, | |
| u64 file_offset) | |
| { | |
| struct btrfs_file_extent_item stack_fi; | |
| struct btrfs_replace_extent_info extent_info; | |
| struct btrfs_trans_handle *trans = trans_in; | |
| struct btrfs_path *path; | |
| u64 start = ins->objectid; | |
| u64 len = ins->offset; | |
| u64 qgroup_released = 0; | |
| int ret; | |
| memset(&stack_fi, 0, sizeof(stack_fi)); | |
| btrfs_set_stack_file_extent_type(&stack_fi, BTRFS_FILE_EXTENT_PREALLOC); | |
| btrfs_set_stack_file_extent_disk_bytenr(&stack_fi, start); | |
| btrfs_set_stack_file_extent_disk_num_bytes(&stack_fi, len); | |
| btrfs_set_stack_file_extent_num_bytes(&stack_fi, len); | |
| btrfs_set_stack_file_extent_ram_bytes(&stack_fi, len); | |
| btrfs_set_stack_file_extent_compression(&stack_fi, BTRFS_COMPRESS_NONE); | |
| /* Encryption and other encoding is reserved and all 0 */ | |
| ret = btrfs_qgroup_release_data(inode, file_offset, len, &qgroup_released); | |
| if (ret < 0) | |
| return ERR_PTR(ret); | |
| if (trans) { | |
| ret = insert_reserved_file_extent(trans, inode, | |
| file_offset, &stack_fi, | |
| true, qgroup_released); | |
| if (ret) | |
| goto free_qgroup; | |
| return trans; | |
| } | |
| extent_info.disk_offset = start; | |
| extent_info.disk_len = len; | |
| extent_info.data_offset = 0; | |
| extent_info.data_len = len; | |
| extent_info.file_offset = file_offset; | |
| extent_info.extent_buf = (char *)&stack_fi; | |
| extent_info.is_new_extent = true; | |
| extent_info.update_times = true; | |
| extent_info.qgroup_reserved = qgroup_released; | |
| extent_info.insertions = 0; | |
| path = btrfs_alloc_path(); | |
| if (!path) { | |
| ret = -ENOMEM; | |
| goto free_qgroup; | |
| } | |
| ret = btrfs_replace_file_extents(inode, path, file_offset, | |
| file_offset + len - 1, &extent_info, | |
| &trans); | |
| btrfs_free_path(path); | |
| if (ret) | |
| goto free_qgroup; | |
| return trans; | |
| free_qgroup: | |
| /* | |
| * We have released qgroup data range at the beginning of the function, | |
| * and normally qgroup_released bytes will be freed when committing | |
| * transaction. | |
| * But if we error out early, we have to free what we have released | |
| * or we leak qgroup data reservation. | |
| */ | |
| btrfs_qgroup_free_refroot(inode->root->fs_info, | |
| btrfs_root_id(inode->root), qgroup_released, | |
| BTRFS_QGROUP_RSV_DATA); | |
| return ERR_PTR(ret); | |
| } | |
| static int __btrfs_prealloc_file_range(struct inode *inode, int mode, | |
| u64 start, u64 num_bytes, u64 min_size, | |
| loff_t actual_len, u64 *alloc_hint, | |
| struct btrfs_trans_handle *trans) | |
| { | |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(inode); | |
| struct extent_map *em; | |
| struct btrfs_root *root = BTRFS_I(inode)->root; | |
| struct btrfs_key ins; | |
| u64 cur_offset = start; | |
| u64 clear_offset = start; | |
| u64 i_size; | |
| u64 cur_bytes; | |
| u64 last_alloc = (u64)-1; | |
| int ret = 0; | |
| bool own_trans = true; | |
| u64 end = start + num_bytes - 1; | |
| if (trans) | |
| own_trans = false; | |
| while (num_bytes > 0) { | |
| cur_bytes = min_t(u64, num_bytes, SZ_256M); | |
| cur_bytes = max(cur_bytes, min_size); | |
| /* | |
| * If we are severely fragmented we could end up with really | |
| * small allocations, so if the allocator is returning small | |
| * chunks lets make its job easier by only searching for those | |
| * sized chunks. | |
| */ | |
| cur_bytes = min(cur_bytes, last_alloc); | |
| ret = btrfs_reserve_extent(root, cur_bytes, cur_bytes, | |
| min_size, 0, *alloc_hint, &ins, true, false); | |
| if (ret) | |
| break; | |
| /* | |
| * We've reserved this space, and thus converted it from | |
| * ->bytes_may_use to ->bytes_reserved. Any error that happens | |
| * from here on out we will only need to clear our reservation | |
| * for the remaining unreserved area, so advance our | |
| * clear_offset by our extent size. | |
| */ | |
| clear_offset += ins.offset; | |
| last_alloc = ins.offset; | |
| trans = insert_prealloc_file_extent(trans, BTRFS_I(inode), | |
| &ins, cur_offset); | |
| /* | |
| * Now that we inserted the prealloc extent we can finally | |
| * decrement the number of reservations in the block group. | |
| * If we did it before, we could race with relocation and have | |
| * relocation miss the reserved extent, making it fail later. | |
| */ | |
| btrfs_dec_block_group_reservations(fs_info, ins.objectid); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| btrfs_free_reserved_extent(fs_info, ins.objectid, | |
| ins.offset, false); | |
| break; | |
| } | |
| em = btrfs_alloc_extent_map(); | |
| if (!em) { | |
| btrfs_drop_extent_map_range(BTRFS_I(inode), cur_offset, | |
| cur_offset + ins.offset - 1, false); | |
| btrfs_set_inode_full_sync(BTRFS_I(inode)); | |
| goto next; | |
| } | |
| em->start = cur_offset; | |
| em->len = ins.offset; | |
| em->disk_bytenr = ins.objectid; | |
| em->offset = 0; | |
| em->disk_num_bytes = ins.offset; | |
| em->ram_bytes = ins.offset; | |
| em->flags |= EXTENT_FLAG_PREALLOC; | |
| em->generation = trans->transid; | |
| ret = btrfs_replace_extent_map_range(BTRFS_I(inode), em, true); | |
| btrfs_free_extent_map(em); | |
| next: | |
| num_bytes -= ins.offset; | |
| cur_offset += ins.offset; | |
| *alloc_hint = ins.objectid + ins.offset; | |
| inode_inc_iversion(inode); | |
| inode_set_ctime_current(inode); | |
| BTRFS_I(inode)->flags |= BTRFS_INODE_PREALLOC; | |
| if (!(mode & FALLOC_FL_KEEP_SIZE) && | |
| (actual_len > inode->i_size) && | |
| (cur_offset > inode->i_size)) { | |
| u64 range_start; | |
| u64 range_end; | |
| if (cur_offset > actual_len) | |
| i_size = actual_len; | |
| else | |
| i_size = cur_offset; | |
| /* | |
| * Make sure the file_extent_tree covers the entire | |
| * range [old_i_size, new_i_size) before we update | |
| * disk_i_size. Without this, a previous KEEP_SIZE | |
| * prealloc that extended past i_size (and was lost | |
| * across umount/mount because file_extent_tree is | |
| * only populated up to round_up(i_size) on inode | |
| * load) can leave a gap inside this range. That gap | |
| * would cause btrfs_inode_safe_disk_i_size_write() | |
| * (via find_contiguous_extent_bit() starting at 0) | |
| * to truncate disk_i_size to the start of the gap, | |
| * making the persisted size smaller than i_size. | |
| */ | |
| range_start = round_down(inode->i_size, fs_info->sectorsize); | |
| range_end = round_up(i_size, fs_info->sectorsize); | |
| ret = btrfs_inode_set_file_extent_range(BTRFS_I(inode), | |
| range_start, range_end - range_start); | |
| if (ret) { | |
| btrfs_abort_transaction(trans, ret); | |
| if (own_trans) | |
| btrfs_end_transaction(trans); | |
| break; | |
| } | |
| i_size_write(inode, i_size); | |
| btrfs_inode_safe_disk_i_size_write(BTRFS_I(inode), 0); | |
| } | |
| ret = btrfs_update_inode(trans, BTRFS_I(inode)); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| if (own_trans) | |
| btrfs_end_transaction(trans); | |
| break; | |
| } | |
| if (own_trans) { | |
| btrfs_end_transaction(trans); | |
| trans = NULL; | |
| } | |
| } | |
| if (clear_offset < end) | |
| btrfs_free_reserved_data_space(BTRFS_I(inode), NULL, clear_offset, | |
| end - clear_offset + 1); | |
| return ret; | |
| } | |
| int btrfs_prealloc_file_range(struct inode *inode, int mode, | |
| u64 start, u64 num_bytes, u64 min_size, | |
| loff_t actual_len, u64 *alloc_hint) | |
| { | |
| return __btrfs_prealloc_file_range(inode, mode, start, num_bytes, | |
| min_size, actual_len, alloc_hint, | |
| NULL); | |
| } | |
| int btrfs_prealloc_file_range_trans(struct inode *inode, | |
| struct btrfs_trans_handle *trans, int mode, | |
| u64 start, u64 num_bytes, u64 min_size, | |
| loff_t actual_len, u64 *alloc_hint) | |
| { | |
| return __btrfs_prealloc_file_range(inode, mode, start, num_bytes, | |
| min_size, actual_len, alloc_hint, trans); | |
| } | |
| /* | |
| * NOTE: in case you are adding MAY_EXEC check for directories: | |
| * we are marking them with IOP_FASTPERM_MAY_EXEC, allowing path lookup to | |
| * elide calls here. | |
| */ | |
| static int btrfs_permission(struct mnt_idmap *idmap, | |
| struct inode *inode, int mask) | |
| { | |
| struct btrfs_root *root = BTRFS_I(inode)->root; | |
| umode_t mode = inode->i_mode; | |
| if (mask & MAY_WRITE && | |
| (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode))) { | |
| if (btrfs_root_readonly(root)) | |
| return -EROFS; | |
| if (BTRFS_I(inode)->flags & BTRFS_INODE_READONLY) | |
| return -EACCES; | |
| } | |
| return generic_permission(idmap, inode, mask); | |
| } | |
| static int btrfs_tmpfile(struct mnt_idmap *idmap, struct inode *dir, | |
| struct file *file, umode_t mode) | |
| { | |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(dir); | |
| struct btrfs_trans_handle *trans; | |
| struct btrfs_root *root = BTRFS_I(dir)->root; | |
| struct inode *inode; | |
| struct btrfs_new_inode_args new_inode_args = { | |
| .dir = dir, | |
| .dentry = file->f_path.dentry, | |
| .orphan = true, | |
| }; | |
| unsigned int trans_num_items; | |
| int ret; | |
| inode = new_inode(dir->i_sb); | |
| if (!inode) | |
| return -ENOMEM; | |
| inode_init_owner(idmap, inode, dir, mode); | |
| inode->i_fop = &btrfs_file_operations; | |
| inode->i_op = &btrfs_file_inode_operations; | |
| inode->i_mapping->a_ops = &btrfs_aops; | |
| new_inode_args.inode = inode; | |
| ret = btrfs_new_inode_prepare(&new_inode_args, &trans_num_items); | |
| if (ret) | |
| goto out_inode; | |
| trans = btrfs_start_transaction(root, trans_num_items); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| goto out_new_inode_args; | |
| } | |
| ret = btrfs_create_new_inode(trans, &new_inode_args); | |
| /* | |
| * We set number of links to 0 in btrfs_create_new_inode(), and here we | |
| * set it to 1 because d_tmpfile() will issue a warning if the count is | |
| * 0, through: | |
| * | |
| * d_tmpfile() -> inode_dec_link_count() -> drop_nlink() | |
| */ | |
| set_nlink(inode, 1); | |
| if (!ret) { | |
| d_tmpfile(file, inode); | |
| unlock_new_inode(inode); | |
| mark_inode_dirty(inode); | |
| } | |
| btrfs_end_transaction(trans); | |
| btrfs_btree_balance_dirty(fs_info); | |
| out_new_inode_args: | |
| btrfs_new_inode_args_destroy(&new_inode_args); | |
| out_inode: | |
| if (ret) | |
| iput(inode); | |
| return finish_open_simple(file, ret); | |
| } | |
| int btrfs_encoded_io_compression_from_extent(struct btrfs_fs_info *fs_info, | |
| int compress_type) | |
| { | |
| switch (compress_type) { | |
| case BTRFS_COMPRESS_NONE: | |
| return BTRFS_ENCODED_IO_COMPRESSION_NONE; | |
| case BTRFS_COMPRESS_ZLIB: | |
| return BTRFS_ENCODED_IO_COMPRESSION_ZLIB; | |
| case BTRFS_COMPRESS_LZO: | |
| /* | |
| * The LZO format depends on the sector size. 64K is the maximum | |
| * sector size that we support. | |
| */ | |
| if (fs_info->sectorsize < SZ_4K || fs_info->sectorsize > SZ_64K) | |
| return -EINVAL; | |
| return BTRFS_ENCODED_IO_COMPRESSION_LZO_4K + | |
| (fs_info->sectorsize_bits - 12); | |
| case BTRFS_COMPRESS_ZSTD: | |
| return BTRFS_ENCODED_IO_COMPRESSION_ZSTD; | |
| default: | |
| return -EUCLEAN; | |
| } | |
| } | |
| static ssize_t btrfs_encoded_read_inline( | |
| struct kiocb *iocb, | |
| struct iov_iter *iter, u64 start, | |
| u64 lockend, | |
| struct extent_state **cached_state, | |
| u64 extent_start, size_t count, | |
| struct btrfs_ioctl_encoded_io_args *encoded, | |
| bool *unlocked) | |
| { | |
| struct btrfs_inode *inode = BTRFS_I(file_inode(iocb->ki_filp)); | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct extent_io_tree *io_tree = &inode->io_tree; | |
| BTRFS_PATH_AUTO_FREE(path); | |
| struct extent_buffer *leaf; | |
| struct btrfs_file_extent_item *item; | |
| u64 ram_bytes; | |
| unsigned long ptr; | |
| void *tmp; | |
| ssize_t ret; | |
| const bool nowait = (iocb->ki_flags & IOCB_NOWAIT); | |
| path = btrfs_alloc_path(); | |
| if (!path) | |
| return -ENOMEM; | |
| path->nowait = nowait; | |
| ret = btrfs_lookup_file_extent(NULL, root, path, btrfs_ino(inode), | |
| extent_start, 0); | |
| if (ret) { | |
| if (unlikely(ret > 0)) { | |
| /* The extent item disappeared? */ | |
| return -EIO; | |
| } | |
| return ret; | |
| } | |
| leaf = path->nodes[0]; | |
| item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_file_extent_item); | |
| ram_bytes = btrfs_file_extent_ram_bytes(leaf, item); | |
| ptr = btrfs_file_extent_inline_start(item); | |
| encoded->len = min_t(u64, extent_start + ram_bytes, | |
| inode->vfs_inode.i_size) - iocb->ki_pos; | |
| ret = btrfs_encoded_io_compression_from_extent(fs_info, | |
| btrfs_file_extent_compression(leaf, item)); | |
| if (ret < 0) | |
| return ret; | |
| encoded->compression = ret; | |
| if (encoded->compression) { | |
| size_t inline_size; | |
| inline_size = btrfs_file_extent_inline_item_len(leaf, | |
| path->slots[0]); | |
| if (inline_size > count) | |
| return -ENOBUFS; | |
| count = inline_size; | |
| encoded->unencoded_len = ram_bytes; | |
| encoded->unencoded_offset = iocb->ki_pos - extent_start; | |
| } else { | |
| count = min_t(u64, count, encoded->len); | |
| encoded->len = count; | |
| encoded->unencoded_len = count; | |
| ptr += iocb->ki_pos - extent_start; | |
| } | |
| tmp = kmalloc(count, GFP_NOFS); | |
| if (!tmp) | |
| return -ENOMEM; | |
| read_extent_buffer(leaf, tmp, ptr, count); | |
| btrfs_release_path(path); | |
| btrfs_unlock_extent(io_tree, start, lockend, cached_state); | |
| btrfs_inode_unlock(inode, BTRFS_ILOCK_SHARED); | |
| *unlocked = true; | |
| ret = copy_to_iter(tmp, count, iter); | |
| if (ret != count) | |
| ret = -EFAULT; | |
| kfree(tmp); | |
| return ret; | |
| } | |
| struct btrfs_encoded_read_private { | |
| struct completion *sync_reads; | |
| void *uring_ctx; | |
| refcount_t pending_refs; | |
| blk_status_t status; | |
| }; | |
| static void btrfs_encoded_read_endio(struct btrfs_bio *bbio) | |
| { | |
| struct btrfs_encoded_read_private *priv = bbio->private; | |
| if (bbio->bio.bi_status) { | |
| /* | |
| * The memory barrier implied by the refcount_dec_and_test() here | |
| * pairs with the memory barrier implied by the refcount_dec_and_test() | |
| * in btrfs_encoded_read_regular_fill_pages() to ensure that | |
| * this write is observed before the load of status in | |
| * btrfs_encoded_read_regular_fill_pages(). | |
| */ | |
| WRITE_ONCE(priv->status, bbio->bio.bi_status); | |
| } | |
| if (refcount_dec_and_test(&priv->pending_refs)) { | |
| int err = blk_status_to_errno(READ_ONCE(priv->status)); | |
| if (priv->uring_ctx) { | |
| btrfs_uring_read_extent_endio(priv->uring_ctx, err); | |
| kfree(priv); | |
| } else { | |
| complete(priv->sync_reads); | |
| } | |
| } | |
| bio_put(&bbio->bio); | |
| } | |
| int btrfs_encoded_read_regular_fill_pages(struct btrfs_inode *inode, | |
| u64 disk_bytenr, u64 disk_io_size, | |
| struct page **pages, void *uring_ctx) | |
| { | |
| struct btrfs_encoded_read_private *priv, sync_priv; | |
| struct completion sync_reads; | |
| unsigned long i = 0; | |
| struct btrfs_bio *bbio; | |
| /* | |
| * Fast path for synchronous reads which completes in this call, io_uring | |
| * needs longer time span. | |
| */ | |
| if (uring_ctx) { | |
| priv = kmalloc_obj(struct btrfs_encoded_read_private, GFP_NOFS); | |
| if (!priv) | |
| return -ENOMEM; | |
| } else { | |
| priv = &sync_priv; | |
| init_completion(&sync_reads); | |
| priv->sync_reads = &sync_reads; | |
| } | |
| refcount_set(&priv->pending_refs, 1); | |
| priv->status = 0; | |
| priv->uring_ctx = uring_ctx; | |
| bbio = btrfs_bio_alloc(BIO_MAX_VECS, REQ_OP_READ, inode, 0, | |
| btrfs_encoded_read_endio, priv); | |
| bbio->bio.bi_iter.bi_sector = disk_bytenr >> SECTOR_SHIFT; | |
| do { | |
| size_t bytes = min_t(u64, disk_io_size, PAGE_SIZE); | |
| if (bio_add_page(&bbio->bio, pages[i], bytes, 0) < bytes) { | |
| refcount_inc(&priv->pending_refs); | |
| btrfs_submit_bbio(bbio, 0); | |
| bbio = btrfs_bio_alloc(BIO_MAX_VECS, REQ_OP_READ, inode, 0, | |
| btrfs_encoded_read_endio, priv); | |
| bbio->bio.bi_iter.bi_sector = disk_bytenr >> SECTOR_SHIFT; | |
| continue; | |
| } | |
| i++; | |
| disk_bytenr += bytes; | |
| disk_io_size -= bytes; | |
| } while (disk_io_size); | |
| refcount_inc(&priv->pending_refs); | |
| btrfs_submit_bbio(bbio, 0); | |
| if (uring_ctx) { | |
| if (refcount_dec_and_test(&priv->pending_refs)) { | |
| int error = blk_status_to_errno(READ_ONCE(priv->status)); | |
| btrfs_uring_read_extent_endio(uring_ctx, error); | |
| kfree(priv); | |
| } | |
| return -EIOCBQUEUED; | |
| } else { | |
| if (!refcount_dec_and_test(&priv->pending_refs)) | |
| wait_for_completion_io(&sync_reads); | |
| /* See btrfs_encoded_read_endio() for ordering. */ | |
| return blk_status_to_errno(READ_ONCE(priv->status)); | |
| } | |
| } | |
| ssize_t btrfs_encoded_read_regular(struct kiocb *iocb, struct iov_iter *iter, | |
| u64 start, u64 lockend, | |
| struct extent_state **cached_state, | |
| u64 disk_bytenr, u64 disk_io_size, | |
| size_t count, bool compressed, bool *unlocked) | |
| { | |
| struct btrfs_inode *inode = BTRFS_I(file_inode(iocb->ki_filp)); | |
| struct extent_io_tree *io_tree = &inode->io_tree; | |
| struct page **pages; | |
| unsigned long nr_pages, i; | |
| u64 cur; | |
| size_t page_offset; | |
| ssize_t ret; | |
| nr_pages = DIV_ROUND_UP(disk_io_size, PAGE_SIZE); | |
| pages = kzalloc_objs(struct page *, nr_pages, GFP_NOFS); | |
| if (!pages) | |
| return -ENOMEM; | |
| ret = btrfs_alloc_page_array(nr_pages, pages, GFP_NOFS); | |
| if (ret) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| ret = btrfs_encoded_read_regular_fill_pages(inode, disk_bytenr, | |
| disk_io_size, pages, NULL); | |
| if (ret) | |
| goto out; | |
| btrfs_unlock_extent(io_tree, start, lockend, cached_state); | |
| btrfs_inode_unlock(inode, BTRFS_ILOCK_SHARED); | |
| *unlocked = true; | |
| if (compressed) { | |
| i = 0; | |
| page_offset = 0; | |
| } else { | |
| i = (iocb->ki_pos - start) >> PAGE_SHIFT; | |
| page_offset = (iocb->ki_pos - start) & (PAGE_SIZE - 1); | |
| } | |
| cur = 0; | |
| while (cur < count) { | |
| size_t bytes = min_t(size_t, count - cur, | |
| PAGE_SIZE - page_offset); | |
| if (copy_page_to_iter(pages[i], page_offset, bytes, | |
| iter) != bytes) { | |
| ret = -EFAULT; | |
| goto out; | |
| } | |
| i++; | |
| cur += bytes; | |
| page_offset = 0; | |
| } | |
| ret = count; | |
| out: | |
| for (i = 0; i < nr_pages; i++) { | |
| if (pages[i]) | |
| __free_page(pages[i]); | |
| } | |
| kfree(pages); | |
| return ret; | |
| } | |
| ssize_t btrfs_encoded_read(struct kiocb *iocb, struct iov_iter *iter, | |
| struct btrfs_ioctl_encoded_io_args *encoded, | |
| struct extent_state **cached_state, | |
| u64 *disk_bytenr, u64 *disk_io_size) | |
| { | |
| struct btrfs_inode *inode = BTRFS_I(file_inode(iocb->ki_filp)); | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| struct extent_io_tree *io_tree = &inode->io_tree; | |
| ssize_t ret; | |
| size_t count = iov_iter_count(iter); | |
| u64 start, lockend; | |
| struct extent_map *em; | |
| const bool nowait = (iocb->ki_flags & IOCB_NOWAIT); | |
| bool unlocked = false; | |
| file_accessed(iocb->ki_filp); | |
| ret = btrfs_inode_lock(inode, | |
| BTRFS_ILOCK_SHARED | (nowait ? BTRFS_ILOCK_TRY : 0)); | |
| if (ret) | |
| return ret; | |
| if (iocb->ki_pos >= inode->vfs_inode.i_size) { | |
| btrfs_inode_unlock(inode, BTRFS_ILOCK_SHARED); | |
| return 0; | |
| } | |
| start = ALIGN_DOWN(iocb->ki_pos, fs_info->sectorsize); | |
| /* | |
| * We don't know how long the extent containing iocb->ki_pos is, but if | |
| * it's compressed we know that it won't be longer than this. | |
| */ | |
| lockend = start + BTRFS_MAX_UNCOMPRESSED - 1; | |
| if (nowait) { | |
| struct btrfs_ordered_extent *ordered; | |
| if (filemap_range_needs_writeback(inode->vfs_inode.i_mapping, | |
| start, lockend)) { | |
| ret = -EAGAIN; | |
| goto out_unlock_inode; | |
| } | |
| if (!btrfs_try_lock_extent(io_tree, start, lockend, cached_state)) { | |
| ret = -EAGAIN; | |
| goto out_unlock_inode; | |
| } | |
| ordered = btrfs_lookup_ordered_range(inode, start, | |
| lockend - start + 1); | |
| if (ordered) { | |
| btrfs_put_ordered_extent(ordered); | |
| btrfs_unlock_extent(io_tree, start, lockend, cached_state); | |
| ret = -EAGAIN; | |
| goto out_unlock_inode; | |
| } | |
| } else { | |
| for (;;) { | |
| struct btrfs_ordered_extent *ordered; | |
| ret = btrfs_wait_ordered_range(inode, start, | |
| lockend - start + 1); | |
| if (ret) | |
| goto out_unlock_inode; | |
| btrfs_lock_extent(io_tree, start, lockend, cached_state); | |
| ordered = btrfs_lookup_ordered_range(inode, start, | |
| lockend - start + 1); | |
| if (!ordered) | |
| break; | |
| btrfs_put_ordered_extent(ordered); | |
| btrfs_unlock_extent(io_tree, start, lockend, cached_state); | |
| cond_resched(); | |
| } | |
| } | |
| em = btrfs_get_extent(inode, NULL, start, lockend - start + 1); | |
| if (IS_ERR(em)) { | |
| ret = PTR_ERR(em); | |
| goto out_unlock_extent; | |
| } | |
| if (em->disk_bytenr == EXTENT_MAP_INLINE) { | |
| u64 extent_start = em->start; | |
| /* | |
| * For inline extents we get everything we need out of the | |
| * extent item. | |
| */ | |
| btrfs_free_extent_map(em); | |
| em = NULL; | |
| ret = btrfs_encoded_read_inline(iocb, iter, start, lockend, | |
| cached_state, extent_start, | |
| count, encoded, &unlocked); | |
| goto out_unlock_extent; | |
| } | |
| /* | |
| * We only want to return up to EOF even if the extent extends beyond | |
| * that. | |
| */ | |
| encoded->len = min_t(u64, btrfs_extent_map_end(em), | |
| inode->vfs_inode.i_size) - iocb->ki_pos; | |
| if (em->disk_bytenr == EXTENT_MAP_HOLE || | |
| (em->flags & EXTENT_FLAG_PREALLOC)) { | |
| *disk_bytenr = EXTENT_MAP_HOLE; | |
| count = min_t(u64, count, encoded->len); | |
| encoded->len = count; | |
| encoded->unencoded_len = count; | |
| } else if (btrfs_extent_map_is_compressed(em)) { | |
| *disk_bytenr = em->disk_bytenr; | |
| /* | |
| * Bail if the buffer isn't large enough to return the whole | |
| * compressed extent. | |
| */ | |
| if (em->disk_num_bytes > count) { | |
| ret = -ENOBUFS; | |
| goto out_em; | |
| } | |
| *disk_io_size = em->disk_num_bytes; | |
| count = em->disk_num_bytes; | |
| encoded->unencoded_len = em->ram_bytes; | |
| encoded->unencoded_offset = iocb->ki_pos - (em->start - em->offset); | |
| ret = btrfs_encoded_io_compression_from_extent(fs_info, | |
| btrfs_extent_map_compression(em)); | |
| if (ret < 0) | |
| goto out_em; | |
| encoded->compression = ret; | |
| } else { | |
| *disk_bytenr = btrfs_extent_map_block_start(em) + (start - em->start); | |
| if (encoded->len > count) | |
| encoded->len = count; | |
| /* | |
| * Don't read beyond what we locked. This also limits the page | |
| * allocations that we'll do. | |
| */ | |
| *disk_io_size = min(lockend + 1, iocb->ki_pos + encoded->len) - start; | |
| count = start + *disk_io_size - iocb->ki_pos; | |
| encoded->len = count; | |
| encoded->unencoded_len = count; | |
| *disk_io_size = ALIGN(*disk_io_size, fs_info->sectorsize); | |
| } | |
| btrfs_free_extent_map(em); | |
| em = NULL; | |
| if (*disk_bytenr == EXTENT_MAP_HOLE) { | |
| btrfs_unlock_extent(io_tree, start, lockend, cached_state); | |
| btrfs_inode_unlock(inode, BTRFS_ILOCK_SHARED); | |
| unlocked = true; | |
| ret = iov_iter_zero(count, iter); | |
| if (ret != count) | |
| ret = -EFAULT; | |
| } else { | |
| ret = -EIOCBQUEUED; | |
| goto out_unlock_extent; | |
| } | |
| out_em: | |
| btrfs_free_extent_map(em); | |
| out_unlock_extent: | |
| /* Leave inode and extent locked if we need to do a read. */ | |
| if (!unlocked && ret != -EIOCBQUEUED) | |
| btrfs_unlock_extent(io_tree, start, lockend, cached_state); | |
| out_unlock_inode: | |
| if (!unlocked && ret != -EIOCBQUEUED) | |
| btrfs_inode_unlock(inode, BTRFS_ILOCK_SHARED); | |
| return ret; | |
| } | |
| ssize_t btrfs_do_encoded_write(struct kiocb *iocb, struct iov_iter *from, | |
| const struct btrfs_ioctl_encoded_io_args *encoded) | |
| { | |
| struct btrfs_inode *inode = BTRFS_I(file_inode(iocb->ki_filp)); | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct extent_io_tree *io_tree = &inode->io_tree; | |
| struct extent_changeset *data_reserved = NULL; | |
| struct extent_state *cached_state = NULL; | |
| struct btrfs_ordered_extent *ordered; | |
| struct btrfs_file_extent file_extent; | |
| struct compressed_bio *cb = NULL; | |
| int compression; | |
| size_t orig_count; | |
| const u32 min_folio_size = btrfs_min_folio_size(fs_info); | |
| const u32 blocksize = fs_info->sectorsize; | |
| u64 start, end; | |
| u64 num_bytes, ram_bytes, disk_num_bytes; | |
| struct btrfs_key ins; | |
| bool extent_reserved = false; | |
| struct extent_map *em; | |
| ssize_t ret; | |
| switch (encoded->compression) { | |
| case BTRFS_ENCODED_IO_COMPRESSION_ZLIB: | |
| compression = BTRFS_COMPRESS_ZLIB; | |
| break; | |
| case BTRFS_ENCODED_IO_COMPRESSION_ZSTD: | |
| compression = BTRFS_COMPRESS_ZSTD; | |
| break; | |
| case BTRFS_ENCODED_IO_COMPRESSION_LZO_4K: | |
| case BTRFS_ENCODED_IO_COMPRESSION_LZO_8K: | |
| case BTRFS_ENCODED_IO_COMPRESSION_LZO_16K: | |
| case BTRFS_ENCODED_IO_COMPRESSION_LZO_32K: | |
| case BTRFS_ENCODED_IO_COMPRESSION_LZO_64K: | |
| /* The sector size must match for LZO. */ | |
| if (encoded->compression - | |
| BTRFS_ENCODED_IO_COMPRESSION_LZO_4K + 12 != | |
| fs_info->sectorsize_bits) | |
| return -EINVAL; | |
| compression = BTRFS_COMPRESS_LZO; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| if (encoded->encryption != BTRFS_ENCODED_IO_ENCRYPTION_NONE) | |
| return -EINVAL; | |
| /* | |
| * Compressed extents should always have checksums, so error out if we | |
| * have a NOCOW file or inode was created while mounted with NODATASUM. | |
| */ | |
| if (inode->flags & BTRFS_INODE_NODATASUM) | |
| return -EINVAL; | |
| orig_count = iov_iter_count(from); | |
| /* The extent size must be sane. */ | |
| if (encoded->unencoded_len > BTRFS_MAX_UNCOMPRESSED || | |
| orig_count > BTRFS_MAX_COMPRESSED || orig_count == 0) | |
| return -EINVAL; | |
| /* | |
| * The compressed data must be smaller than the decompressed data. | |
| * | |
| * It's of course possible for data to compress to larger or the same | |
| * size, but the buffered I/O path falls back to no compression for such | |
| * data, and we don't want to break any assumptions by creating these | |
| * extents. | |
| * | |
| * Note that this is less strict than the current check we have that the | |
| * compressed data must be at least one sector smaller than the | |
| * decompressed data. We only want to enforce the weaker requirement | |
| * from old kernels that it is at least one byte smaller. | |
| */ | |
| if (orig_count >= encoded->unencoded_len) | |
| return -EINVAL; | |
| /* The extent must start on a sector boundary. */ | |
| start = iocb->ki_pos; | |
| if (!IS_ALIGNED(start, fs_info->sectorsize)) | |
| return -EINVAL; | |
| /* | |
| * The extent must end on a sector boundary. However, we allow a write | |
| * which ends at or extends i_size to have an unaligned length; we round | |
| * up the extent size and set i_size to the unaligned end. | |
| */ | |
| if (start + encoded->len < inode->vfs_inode.i_size && | |
| !IS_ALIGNED(start + encoded->len, fs_info->sectorsize)) | |
| return -EINVAL; | |
| /* Finally, the offset in the unencoded data must be sector-aligned. */ | |
| if (!IS_ALIGNED(encoded->unencoded_offset, fs_info->sectorsize)) | |
| return -EINVAL; | |
| num_bytes = ALIGN(encoded->len, fs_info->sectorsize); | |
| ram_bytes = ALIGN(encoded->unencoded_len, fs_info->sectorsize); | |
| end = start + num_bytes - 1; | |
| /* | |
| * If the extent cannot be inline, the compressed data on disk must be | |
| * sector-aligned. For convenience, we extend it with zeroes if it | |
| * isn't. | |
| */ | |
| disk_num_bytes = ALIGN(orig_count, fs_info->sectorsize); | |
| cb = btrfs_alloc_compressed_write(inode, start, num_bytes); | |
| for (int i = 0; i * min_folio_size < disk_num_bytes; i++) { | |
| struct folio *folio; | |
| size_t bytes = min(min_folio_size, iov_iter_count(from)); | |
| char *kaddr; | |
| folio = btrfs_alloc_compr_folio(fs_info, GFP_NOFS); | |
| if (!folio) { | |
| ret = -ENOMEM; | |
| goto out_cb; | |
| } | |
| kaddr = kmap_local_folio(folio, 0); | |
| ret = copy_from_iter(kaddr, bytes, from); | |
| kunmap_local(kaddr); | |
| if (ret != bytes) { | |
| folio_put(folio); | |
| ret = -EFAULT; | |
| goto out_cb; | |
| } | |
| if (!IS_ALIGNED(bytes, blocksize)) | |
| folio_zero_range(folio, bytes, round_up(bytes, blocksize) - bytes); | |
| ret = bio_add_folio(&cb->bbio.bio, folio, round_up(bytes, blocksize), 0); | |
| if (unlikely(!ret)) { | |
| folio_put(folio); | |
| ret = -EINVAL; | |
| goto out_cb; | |
| } | |
| } | |
| ASSERT(cb->bbio.bio.bi_iter.bi_size == disk_num_bytes); | |
| for (;;) { | |
| ret = btrfs_wait_ordered_range(inode, start, num_bytes); | |
| if (ret) | |
| goto out_cb; | |
| ret = invalidate_inode_pages2_range(inode->vfs_inode.i_mapping, | |
| start >> PAGE_SHIFT, | |
| end >> PAGE_SHIFT); | |
| if (ret) | |
| goto out_cb; | |
| btrfs_lock_extent(io_tree, start, end, &cached_state); | |
| ordered = btrfs_lookup_ordered_range(inode, start, num_bytes); | |
| if (!ordered && | |
| !filemap_range_has_page(inode->vfs_inode.i_mapping, start, end)) | |
| break; | |
| if (ordered) | |
| btrfs_put_ordered_extent(ordered); | |
| btrfs_unlock_extent(io_tree, start, end, &cached_state); | |
| cond_resched(); | |
| } | |
| /* | |
| * We don't use the higher-level delalloc space functions because our | |
| * num_bytes and disk_num_bytes are different. | |
| */ | |
| ret = btrfs_alloc_data_chunk_ondemand(inode, disk_num_bytes); | |
| if (ret) | |
| goto out_unlock; | |
| ret = btrfs_qgroup_reserve_data(inode, &data_reserved, start, num_bytes); | |
| if (ret) | |
| goto out_free_data_space; | |
| ret = btrfs_delalloc_reserve_metadata(inode, num_bytes, disk_num_bytes, | |
| false); | |
| if (ret) | |
| goto out_qgroup_free_data; | |
| /* Try an inline extent first. */ | |
| if (encoded->unencoded_len == encoded->len && | |
| encoded->unencoded_offset == 0 && | |
| can_cow_file_range_inline(inode, start, encoded->len, orig_count)) { | |
| ret = __cow_file_range_inline(inode, encoded->len, | |
| orig_count, compression, | |
| bio_first_folio_all(&cb->bbio.bio), | |
| true); | |
| if (ret <= 0) { | |
| if (ret == 0) | |
| ret = orig_count; | |
| goto out_delalloc_release; | |
| } | |
| } | |
| ret = btrfs_reserve_extent(root, disk_num_bytes, disk_num_bytes, | |
| disk_num_bytes, 0, 0, &ins, true, true); | |
| if (ret) | |
| goto out_delalloc_release; | |
| extent_reserved = true; | |
| file_extent.disk_bytenr = ins.objectid; | |
| file_extent.disk_num_bytes = ins.offset; | |
| file_extent.num_bytes = num_bytes; | |
| file_extent.ram_bytes = ram_bytes; | |
| file_extent.offset = encoded->unencoded_offset; | |
| file_extent.compression = compression; | |
| em = btrfs_create_io_em(inode, start, &file_extent, BTRFS_ORDERED_COMPRESSED); | |
| if (IS_ERR(em)) { | |
| ret = PTR_ERR(em); | |
| goto out_free_reserved; | |
| } | |
| btrfs_free_extent_map(em); | |
| ordered = btrfs_alloc_ordered_extent(inode, start, &file_extent, | |
| (1U << BTRFS_ORDERED_ENCODED) | | |
| (1U << BTRFS_ORDERED_COMPRESSED)); | |
| if (IS_ERR(ordered)) { | |
| btrfs_drop_extent_map_range(inode, start, end, false); | |
| ret = PTR_ERR(ordered); | |
| goto out_free_reserved; | |
| } | |
| btrfs_dec_block_group_reservations(fs_info, ins.objectid); | |
| if (start + encoded->len > inode->vfs_inode.i_size) | |
| i_size_write(&inode->vfs_inode, start + encoded->len); | |
| btrfs_unlock_extent(io_tree, start, end, &cached_state); | |
| btrfs_delalloc_release_extents(inode, num_bytes); | |
| btrfs_submit_compressed_write(ordered, cb); | |
| ret = orig_count; | |
| goto out; | |
| out_free_reserved: | |
| btrfs_dec_block_group_reservations(fs_info, ins.objectid); | |
| btrfs_free_reserved_extent(fs_info, ins.objectid, ins.offset, true); | |
| out_delalloc_release: | |
| btrfs_delalloc_release_extents(inode, num_bytes); | |
| btrfs_delalloc_release_metadata(inode, disk_num_bytes, ret < 0); | |
| out_qgroup_free_data: | |
| if (ret < 0) | |
| btrfs_qgroup_free_data(inode, data_reserved, start, num_bytes, NULL); | |
| out_free_data_space: | |
| /* | |
| * If btrfs_reserve_extent() succeeded, then we already decremented | |
| * bytes_may_use. | |
| */ | |
| if (!extent_reserved) | |
| btrfs_free_reserved_data_space_noquota(inode, disk_num_bytes); | |
| out_unlock: | |
| btrfs_unlock_extent(io_tree, start, end, &cached_state); | |
| out_cb: | |
| if (cb) | |
| cleanup_compressed_bio(cb); | |
| out: | |
| extent_changeset_free(data_reserved); | |
| if (ret >= 0) | |
| iocb->ki_pos += encoded->len; | |
| return ret; | |
| } | |
| #ifdef CONFIG_SWAP | |
| /* | |
| * Add an entry indicating a block group or device which is pinned by a | |
| * swapfile. Returns 0 on success, 1 if there is already an entry for it, or a | |
| * negative errno on failure. | |
| */ | |
| static int btrfs_add_swapfile_pin(struct inode *inode, void *ptr, | |
| bool is_block_group) | |
| { | |
| struct btrfs_fs_info *fs_info = BTRFS_I(inode)->root->fs_info; | |
| struct btrfs_swapfile_pin *sp, *entry; | |
| struct rb_node **p; | |
| struct rb_node *parent = NULL; | |
| sp = kmalloc_obj(*sp, GFP_NOFS); | |
| if (!sp) | |
| return -ENOMEM; | |
| sp->ptr = ptr; | |
| sp->inode = inode; | |
| sp->is_block_group = is_block_group; | |
| sp->bg_extent_count = 1; | |
| spin_lock(&fs_info->swapfile_pins_lock); | |
| p = &fs_info->swapfile_pins.rb_node; | |
| while (*p) { | |
| parent = *p; | |
| entry = rb_entry(parent, struct btrfs_swapfile_pin, node); | |
| if (sp->ptr < entry->ptr || | |
| (sp->ptr == entry->ptr && sp->inode < entry->inode)) { | |
| p = &(*p)->rb_left; | |
| } else if (sp->ptr > entry->ptr || | |
| (sp->ptr == entry->ptr && sp->inode > entry->inode)) { | |
| p = &(*p)->rb_right; | |
| } else { | |
| if (is_block_group) | |
| entry->bg_extent_count++; | |
| spin_unlock(&fs_info->swapfile_pins_lock); | |
| kfree(sp); | |
| return 1; | |
| } | |
| } | |
| rb_link_node(&sp->node, parent, p); | |
| rb_insert_color(&sp->node, &fs_info->swapfile_pins); | |
| spin_unlock(&fs_info->swapfile_pins_lock); | |
| return 0; | |
| } | |
| /* Free all of the entries pinned by this swapfile. */ | |
| static void btrfs_free_swapfile_pins(struct inode *inode) | |
| { | |
| struct btrfs_fs_info *fs_info = BTRFS_I(inode)->root->fs_info; | |
| struct btrfs_swapfile_pin *sp; | |
| struct rb_node *node, *next; | |
| u64 bg_bytes_released = 0; | |
| u32 bg_nr_released = 0; | |
| spin_lock(&fs_info->swapfile_pins_lock); | |
| node = rb_first(&fs_info->swapfile_pins); | |
| while (node) { | |
| next = rb_next(node); | |
| sp = rb_entry(node, struct btrfs_swapfile_pin, node); | |
| if (sp->inode == inode) { | |
| rb_erase(&sp->node, &fs_info->swapfile_pins); | |
| if (sp->is_block_group) { | |
| struct btrfs_block_group *bg = sp->ptr; | |
| bg_bytes_released += bg->length; | |
| bg_nr_released++; | |
| btrfs_dec_block_group_swap_extents(bg, | |
| sp->bg_extent_count); | |
| btrfs_put_block_group(bg); | |
| } | |
| kfree(sp); | |
| } | |
| node = next; | |
| } | |
| spin_unlock(&fs_info->swapfile_pins_lock); | |
| btrfs_info(fs_info, | |
| "swapfile deactivated on root %llu ino %llu, released %llu bytes from %u block group(s)", | |
| btrfs_root_id(BTRFS_I(inode)->root), | |
| btrfs_ino(BTRFS_I(inode)), bg_bytes_released, | |
| bg_nr_released); | |
| } | |
| struct btrfs_swap_info { | |
| u64 start; | |
| u64 block_start; | |
| u64 block_len; | |
| u64 lowest_ppage; | |
| u64 highest_ppage; | |
| unsigned long nr_pages; | |
| int nr_extents; | |
| }; | |
| static int btrfs_add_swap_extent(struct swap_info_struct *sis, | |
| struct btrfs_swap_info *bsi) | |
| { | |
| unsigned long nr_pages; | |
| unsigned long max_pages; | |
| u64 first_ppage, first_ppage_reported, next_ppage; | |
| int ret; | |
| /* | |
| * Our swapfile may have had its size extended after the swap header was | |
| * written. In that case activating the swapfile should not go beyond | |
| * the max size set in the swap header. | |
| */ | |
| if (bsi->nr_pages >= sis->max) | |
| return 0; | |
| max_pages = sis->max - bsi->nr_pages; | |
| first_ppage = PAGE_ALIGN(bsi->block_start) >> PAGE_SHIFT; | |
| next_ppage = PAGE_ALIGN_DOWN(bsi->block_start + bsi->block_len) >> PAGE_SHIFT; | |
| if (first_ppage >= next_ppage) | |
| return 0; | |
| nr_pages = next_ppage - first_ppage; | |
| nr_pages = min(nr_pages, max_pages); | |
| first_ppage_reported = first_ppage; | |
| if (bsi->start == 0) | |
| first_ppage_reported++; | |
| if (bsi->lowest_ppage > first_ppage_reported) | |
| bsi->lowest_ppage = first_ppage_reported; | |
| if (bsi->highest_ppage < (next_ppage - 1)) | |
| bsi->highest_ppage = next_ppage - 1; | |
| ret = add_swap_extent(sis, bsi->nr_pages, nr_pages, first_ppage); | |
| if (ret < 0) | |
| return ret; | |
| bsi->nr_extents += ret; | |
| bsi->nr_pages += nr_pages; | |
| return 0; | |
| } | |
| static void btrfs_swap_deactivate(struct file *file) | |
| { | |
| struct inode *inode = file_inode(file); | |
| btrfs_free_swapfile_pins(inode); | |
| atomic_dec(&BTRFS_I(inode)->root->nr_swapfiles); | |
| } | |
| static int btrfs_swap_activate(struct swap_info_struct *sis, struct file *file, | |
| sector_t *span) | |
| { | |
| struct inode *inode = file_inode(file); | |
| struct btrfs_root *root = BTRFS_I(inode)->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree; | |
| struct extent_state *cached_state = NULL; | |
| struct btrfs_chunk_map *map = NULL; | |
| struct btrfs_device *device = NULL; | |
| struct btrfs_swap_info bsi = { | |
| .lowest_ppage = (sector_t)-1ULL, | |
| }; | |
| struct btrfs_backref_share_check_ctx *backref_ctx = NULL; | |
| struct btrfs_path *path = NULL; | |
| int ret = 0; | |
| u32 pinned_bg_nr = 0; | |
| u64 isize; | |
| u64 prev_extent_end = 0; | |
| u64 pinned_bg_size = 0; | |
| /* | |
| * Acquire the inode's mmap lock to prevent races with memory mapped | |
| * writes, as they could happen after we flush delalloc below and before | |
| * we lock the extent range further below. The inode was already locked | |
| * up in the call chain. | |
| */ | |
| btrfs_assert_inode_locked(BTRFS_I(inode)); | |
| down_write(&BTRFS_I(inode)->i_mmap_lock); | |
| /* | |
| * If the swap file was just created, make sure delalloc is done. If the | |
| * file changes again after this, the user is doing something stupid and | |
| * we don't really care. | |
| */ | |
| ret = btrfs_wait_ordered_range(BTRFS_I(inode), 0, (u64)-1); | |
| if (ret) | |
| goto out_unlock_mmap; | |
| /* | |
| * The inode is locked, so these flags won't change after we check them. | |
| */ | |
| if (BTRFS_I(inode)->flags & BTRFS_INODE_COMPRESS) { | |
| btrfs_warn(fs_info, "swapfile must not be compressed"); | |
| ret = -EINVAL; | |
| goto out_unlock_mmap; | |
| } | |
| if (!(BTRFS_I(inode)->flags & BTRFS_INODE_NODATACOW)) { | |
| btrfs_warn(fs_info, "swapfile must not be copy-on-write"); | |
| ret = -EINVAL; | |
| goto out_unlock_mmap; | |
| } | |
| if (!(BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)) { | |
| btrfs_warn(fs_info, "swapfile must not be checksummed"); | |
| ret = -EINVAL; | |
| goto out_unlock_mmap; | |
| } | |
| path = btrfs_alloc_path(); | |
| backref_ctx = btrfs_alloc_backref_share_check_ctx(); | |
| if (!path || !backref_ctx) { | |
| ret = -ENOMEM; | |
| goto out_unlock_mmap; | |
| } | |
| /* | |
| * Balance or device remove/replace/resize can move stuff around from | |
| * under us. The exclop protection makes sure they aren't running/won't | |
| * run concurrently while we are mapping the swap extents, and | |
| * fs_info->swapfile_pins prevents them from running while the swap | |
| * file is active and moving the extents. Note that this also prevents | |
| * a concurrent device add which isn't actually necessary, but it's not | |
| * really worth the trouble to allow it. | |
| */ | |
| if (!btrfs_exclop_start(fs_info, BTRFS_EXCLOP_SWAP_ACTIVATE)) { | |
| btrfs_warn(fs_info, | |
| "cannot activate swapfile while exclusive operation is running"); | |
| ret = -EBUSY; | |
| goto out_unlock_mmap; | |
| } | |
| /* | |
| * Prevent snapshot creation while we are activating the swap file. | |
| * We do not want to race with snapshot creation. If snapshot creation | |
| * already started before we bumped nr_swapfiles from 0 to 1 and | |
| * completes before the first write into the swap file after it is | |
| * activated, than that write would fallback to COW. | |
| */ | |
| if (!btrfs_drew_try_write_lock(&root->snapshot_lock)) { | |
| btrfs_exclop_finish(fs_info); | |
| btrfs_warn(fs_info, | |
| "cannot activate swapfile because snapshot creation is in progress"); | |
| ret = -EINVAL; | |
| goto out_unlock_mmap; | |
| } | |
| /* | |
| * Snapshots can create extents which require COW even if NODATACOW is | |
| * set. We use this counter to prevent snapshots. We must increment it | |
| * before walking the extents because we don't want a concurrent | |
| * snapshot to run after we've already checked the extents. | |
| * | |
| * It is possible that subvolume is marked for deletion but still not | |
| * removed yet. To prevent this race, we check the root status before | |
| * activating the swapfile. | |
| */ | |
| spin_lock(&root->root_item_lock); | |
| if (btrfs_root_dead(root)) { | |
| spin_unlock(&root->root_item_lock); | |
| btrfs_drew_write_unlock(&root->snapshot_lock); | |
| btrfs_exclop_finish(fs_info); | |
| btrfs_warn(fs_info, | |
| "cannot activate swapfile because subvolume %llu is being deleted", | |
| btrfs_root_id(root)); | |
| ret = -EPERM; | |
| goto out_unlock_mmap; | |
| } | |
| atomic_inc(&root->nr_swapfiles); | |
| spin_unlock(&root->root_item_lock); | |
| isize = ALIGN_DOWN(inode->i_size, fs_info->sectorsize); | |
| btrfs_lock_extent(io_tree, 0, isize - 1, &cached_state); | |
| while (prev_extent_end < isize) { | |
| struct btrfs_key key; | |
| struct extent_buffer *leaf; | |
| struct btrfs_file_extent_item *ei; | |
| struct btrfs_block_group *bg; | |
| u64 logical_block_start; | |
| u64 physical_block_start; | |
| u64 extent_gen; | |
| u64 disk_bytenr; | |
| u64 len; | |
| key.objectid = btrfs_ino(BTRFS_I(inode)); | |
| key.type = BTRFS_EXTENT_DATA_KEY; | |
| key.offset = prev_extent_end; | |
| ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); | |
| if (ret < 0) | |
| goto out; | |
| /* | |
| * If key not found it means we have an implicit hole (NO_HOLES | |
| * is enabled). | |
| */ | |
| if (ret > 0) { | |
| btrfs_warn(fs_info, "swapfile must not have holes"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| leaf = path->nodes[0]; | |
| ei = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_file_extent_item); | |
| if (btrfs_file_extent_type(leaf, ei) == BTRFS_FILE_EXTENT_INLINE) { | |
| /* | |
| * It's unlikely we'll ever actually find ourselves | |
| * here, as a file small enough to fit inline won't be | |
| * big enough to store more than the swap header, but in | |
| * case something changes in the future, let's catch it | |
| * here rather than later. | |
| */ | |
| btrfs_warn(fs_info, "swapfile must not be inline"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| if (btrfs_file_extent_compression(leaf, ei) != BTRFS_COMPRESS_NONE) { | |
| btrfs_warn(fs_info, "swapfile must not be compressed"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| disk_bytenr = btrfs_file_extent_disk_bytenr(leaf, ei); | |
| if (disk_bytenr == 0) { | |
| btrfs_warn(fs_info, "swapfile must not have holes"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| logical_block_start = disk_bytenr + btrfs_file_extent_offset(leaf, ei); | |
| extent_gen = btrfs_file_extent_generation(leaf, ei); | |
| prev_extent_end = btrfs_file_extent_end(path); | |
| if (prev_extent_end > isize) | |
| len = isize - key.offset; | |
| else | |
| len = btrfs_file_extent_num_bytes(leaf, ei); | |
| backref_ctx->curr_leaf_bytenr = leaf->start; | |
| /* | |
| * Don't need the path anymore, release to avoid deadlocks when | |
| * calling btrfs_is_data_extent_shared() because when joining a | |
| * transaction it can block waiting for the current one's commit | |
| * which in turn may be trying to lock the same leaf to flush | |
| * delayed items for example. | |
| */ | |
| btrfs_release_path(path); | |
| ret = btrfs_is_data_extent_shared(BTRFS_I(inode), disk_bytenr, | |
| extent_gen, backref_ctx); | |
| if (ret < 0) { | |
| goto out; | |
| } else if (ret > 0) { | |
| btrfs_warn(fs_info, | |
| "swapfile must not be copy-on-write"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| map = btrfs_get_chunk_map(fs_info, logical_block_start, len); | |
| if (IS_ERR(map)) { | |
| ret = PTR_ERR(map); | |
| goto out; | |
| } | |
| if (map->type & BTRFS_BLOCK_GROUP_PROFILE_MASK) { | |
| btrfs_warn(fs_info, | |
| "swapfile must have single data profile"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| if (device == NULL) { | |
| device = map->stripes[0].dev; | |
| ret = btrfs_add_swapfile_pin(inode, device, false); | |
| if (ret == 1) | |
| ret = 0; | |
| else if (ret) | |
| goto out; | |
| } else if (device != map->stripes[0].dev) { | |
| btrfs_warn(fs_info, "swapfile must be on one device"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| physical_block_start = (map->stripes[0].physical + | |
| (logical_block_start - map->start)); | |
| btrfs_free_chunk_map(map); | |
| map = NULL; | |
| bg = btrfs_lookup_block_group(fs_info, logical_block_start); | |
| if (!bg) { | |
| btrfs_warn(fs_info, | |
| "could not find block group containing swapfile"); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| if (!btrfs_inc_block_group_swap_extents(bg)) { | |
| btrfs_warn(fs_info, | |
| "block group for swapfile at %llu is read-only%s", | |
| bg->start, | |
| atomic_read(&fs_info->scrubs_running) ? | |
| " (scrub running)" : ""); | |
| btrfs_put_block_group(bg); | |
| ret = -EINVAL; | |
| goto out; | |
| } | |
| ret = btrfs_add_swapfile_pin(inode, bg, true); | |
| if (ret) { | |
| btrfs_put_block_group(bg); | |
| if (ret == 1) | |
| ret = 0; | |
| else | |
| goto out; | |
| } else { | |
| pinned_bg_size += bg->length; | |
| pinned_bg_nr++; | |
| } | |
| if (bsi.block_len && | |
| bsi.block_start + bsi.block_len == physical_block_start) { | |
| bsi.block_len += len; | |
| } else { | |
| if (bsi.block_len) { | |
| ret = btrfs_add_swap_extent(sis, &bsi); | |
| if (ret) | |
| goto out; | |
| } | |
| bsi.start = key.offset; | |
| bsi.block_start = physical_block_start; | |
| bsi.block_len = len; | |
| } | |
| if (fatal_signal_pending(current)) { | |
| ret = -EINTR; | |
| goto out; | |
| } | |
| cond_resched(); | |
| } | |
| if (bsi.block_len) | |
| ret = btrfs_add_swap_extent(sis, &bsi); | |
| out: | |
| if (!IS_ERR_OR_NULL(map)) | |
| btrfs_free_chunk_map(map); | |
| btrfs_unlock_extent(io_tree, 0, isize - 1, &cached_state); | |
| if (ret) | |
| btrfs_swap_deactivate(file); | |
| btrfs_drew_write_unlock(&root->snapshot_lock); | |
| btrfs_exclop_finish(fs_info); | |
| out_unlock_mmap: | |
| up_write(&BTRFS_I(inode)->i_mmap_lock); | |
| btrfs_free_backref_share_ctx(backref_ctx); | |
| btrfs_free_path(path); | |
| if (ret) | |
| return ret; | |
| btrfs_info(fs_info, | |
| "swapfile activated on root %llu ino %llu, pinned down %llu bytes from %u block group(s)", | |
| btrfs_root_id(BTRFS_I(inode)->root), | |
| btrfs_ino(BTRFS_I(inode)), | |
| pinned_bg_size, pinned_bg_nr); | |
| btrfs_warn(fs_info, | |
| "block groups with swapfile extents will not be scrubbed or balanced"); | |
| if (device) | |
| sis->bdev = device->bdev; | |
| *span = bsi.highest_ppage - bsi.lowest_ppage + 1; | |
| sis->max = bsi.nr_pages; | |
| sis->pages = bsi.nr_pages - 1; | |
| return bsi.nr_extents; | |
| } | |
| #else | |
| static void btrfs_swap_deactivate(struct file *file) | |
| { | |
| } | |
| static int btrfs_swap_activate(struct swap_info_struct *sis, struct file *file, | |
| sector_t *span) | |
| { | |
| return -EOPNOTSUPP; | |
| } | |
| #endif | |
| /* | |
| * Update the number of bytes used in the VFS' inode. When we replace extents in | |
| * a range (clone, dedupe, fallocate's zero range), we must update the number of | |
| * bytes used by the inode in an atomic manner, so that concurrent stat(2) calls | |
| * always get a correct value. | |
| */ | |
| void btrfs_update_inode_bytes(struct btrfs_inode *inode, | |
| const u64 add_bytes, | |
| const u64 del_bytes) | |
| { | |
| if (add_bytes == del_bytes) | |
| return; | |
| spin_lock(&inode->lock); | |
| if (del_bytes > 0) | |
| inode_sub_bytes(&inode->vfs_inode, del_bytes); | |
| if (add_bytes > 0) | |
| inode_add_bytes(&inode->vfs_inode, add_bytes); | |
| spin_unlock(&inode->lock); | |
| } | |
| /* | |
| * Verify that there are no ordered extents for a given file range. | |
| * | |
| * @inode: The target inode. | |
| * @start: Start offset of the file range, should be sector size aligned. | |
| * @end: End offset (inclusive) of the file range, its value +1 should be | |
| * sector size aligned. | |
| * | |
| * This should typically be used for cases where we locked an inode's VFS lock in | |
| * exclusive mode, we have also locked the inode's i_mmap_lock in exclusive mode, | |
| * we have flushed all delalloc in the range, we have waited for all ordered | |
| * extents in the range to complete and finally we have locked the file range in | |
| * the inode's io_tree. | |
| */ | |
| void btrfs_assert_inode_range_clean(struct btrfs_inode *inode, u64 start, u64 end) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_ordered_extent *ordered; | |
| if (!IS_ENABLED(CONFIG_BTRFS_ASSERT)) | |
| return; | |
| ordered = btrfs_lookup_first_ordered_range(inode, start, end + 1 - start); | |
| if (ordered) { | |
| btrfs_err(root->fs_info, | |
| "found unexpected ordered extent in file range [%llu, %llu] for inode %llu root %llu (ordered range [%llu, %llu])", | |
| start, end, btrfs_ino(inode), btrfs_root_id(root), | |
| ordered->file_offset, | |
| ordered->file_offset + ordered->num_bytes - 1); | |
| btrfs_put_ordered_extent(ordered); | |
| } | |
| ASSERT(ordered == NULL); | |
| } | |
| /* | |
| * Find the first inode with a minimum number. | |
| * | |
| * @root: The root to search for. | |
| * @min_ino: The minimum inode number. | |
| * | |
| * Find the first inode in the @root with a number >= @min_ino and return it. | |
| * Returns NULL if no such inode found. | |
| */ | |
| struct btrfs_inode *btrfs_find_first_inode(struct btrfs_root *root, u64 min_ino) | |
| { | |
| struct btrfs_inode *inode; | |
| unsigned long from = min_ino; | |
| xa_lock(&root->inodes); | |
| while (true) { | |
| inode = xa_find(&root->inodes, &from, ULONG_MAX, XA_PRESENT); | |
| if (!inode) | |
| break; | |
| if (igrab(&inode->vfs_inode)) | |
| break; | |
| from = btrfs_ino(inode) + 1; | |
| xa_unlock(&root->inodes); | |
| cond_resched(); | |
| xa_lock(&root->inodes); | |
| } | |
| xa_unlock(&root->inodes); | |
| return inode; | |
| } | |
| static const struct inode_operations btrfs_dir_inode_operations = { | |
| .getattr = btrfs_getattr, | |
| .lookup = btrfs_lookup, | |
| .create = btrfs_create, | |
| .unlink = btrfs_unlink, | |
| .link = btrfs_link, | |
| .mkdir = btrfs_mkdir, | |
| .rmdir = btrfs_rmdir, | |
| .rename = btrfs_rename2, | |
| .symlink = btrfs_symlink, | |
| .setattr = btrfs_setattr, | |
| .mknod = btrfs_mknod, | |
| .listxattr = btrfs_listxattr, | |
| .permission = btrfs_permission, | |
| .get_inode_acl = btrfs_get_acl, | |
| .set_acl = btrfs_set_acl, | |
| .update_time = btrfs_update_time, | |
| .tmpfile = btrfs_tmpfile, | |
| .fileattr_get = btrfs_fileattr_get, | |
| .fileattr_set = btrfs_fileattr_set, | |
| }; | |
| static const struct file_operations btrfs_dir_file_operations = { | |
| .llseek = btrfs_dir_llseek, | |
| .read = generic_read_dir, | |
| .iterate_shared = btrfs_real_readdir, | |
| .open = btrfs_opendir, | |
| .unlocked_ioctl = btrfs_ioctl, | |
| #ifdef CONFIG_COMPAT | |
| .compat_ioctl = btrfs_compat_ioctl, | |
| #endif | |
| .release = btrfs_release_file, | |
| .fsync = btrfs_sync_file, | |
| .setlease = generic_setlease, | |
| }; | |
| /* | |
| * The folio is going dirty without a btrfs delalloc space reservation. | |
| * This requires a fixup before writeback which we might sleep so cannot | |
| * run in this context, so we merely set state on the folio indicating it | |
| * needs fixup before writeback. | |
| * | |
| * Note that there is no range in the input, so the whole folio is marked | |
| * dirty and fixup. | |
| * | |
| * We believe that all callers of dirty_folio either: | |
| * - take the folio lock (e.g. pinned folio release notification). | |
| * - take the pte lock but must be running on a dirty pte which means | |
| * page_mkwrite() ran on it and reserved the space. zap_pte_range() cannot | |
| * race with writeback cleaning the folio because writeback runs | |
| * folio_mkclean() which also uses the pte lock and revokes outstanding | |
| * writable mappings. | |
| * Therefore, an additional folio private lock (a la bfs->lock for all cases, | |
| * not just subpage) is not necessary. | |
| */ | |
| static bool btrfs_data_dirty_folio(struct address_space *mapping, | |
| struct folio *folio) | |
| { | |
| struct btrfs_inode *inode = BTRFS_I(mapping->host); | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| const u64 page_start = folio_pos(folio); | |
| const u64 range_end = min_t(u64, folio_next_pos(folio), | |
| round_up(i_size_read(&inode->vfs_inode), | |
| fs_info->sectorsize)); | |
| if (range_end > page_start) | |
| btrfs_folio_set_fixup_dirty(fs_info, folio, page_start, | |
| range_end - page_start); | |
| return filemap_dirty_folio(mapping, folio); | |
| } | |
| /* | |
| * btrfs doesn't support the bmap operation because swapfiles | |
| * use bmap to make a mapping of extents in the file. They assume | |
| * these extents won't change over the life of the file and they | |
| * use the bmap result to do IO directly to the drive. | |
| * | |
| * the btrfs bmap call would return logical addresses that aren't | |
| * suitable for IO and they also will change frequently as COW | |
| * operations happen. So, swapfile + btrfs == corruption. | |
| * | |
| * For now we're avoiding this by dropping bmap. | |
| */ | |
| static const struct address_space_operations btrfs_aops = { | |
| .read_folio = btrfs_read_folio, | |
| .writepages = btrfs_writepages, | |
| .readahead = btrfs_readahead, | |
| .invalidate_folio = btrfs_invalidate_folio, | |
| .launder_folio = btrfs_launder_folio, | |
| .release_folio = btrfs_release_folio, | |
| .migrate_folio = btrfs_migrate_folio, | |
| .dirty_folio = btrfs_data_dirty_folio, | |
| .error_remove_folio = generic_error_remove_folio, | |
| .swap_activate = btrfs_swap_activate, | |
| .swap_deactivate = btrfs_swap_deactivate, | |
| }; | |
| static const struct inode_operations btrfs_file_inode_operations = { | |
| .getattr = btrfs_getattr, | |
| .setattr = btrfs_setattr, | |
| .listxattr = btrfs_listxattr, | |
| .permission = btrfs_permission, | |
| .fiemap = btrfs_fiemap, | |
| .get_inode_acl = btrfs_get_acl, | |
| .set_acl = btrfs_set_acl, | |
| .update_time = btrfs_update_time, | |
| .fileattr_get = btrfs_fileattr_get, | |
| .fileattr_set = btrfs_fileattr_set, | |
| }; | |
| static const struct inode_operations btrfs_special_inode_operations = { | |
| .getattr = btrfs_getattr, | |
| .setattr = btrfs_setattr, | |
| .permission = btrfs_permission, | |
| .listxattr = btrfs_listxattr, | |
| .get_inode_acl = btrfs_get_acl, | |
| .set_acl = btrfs_set_acl, | |
| .update_time = btrfs_update_time, | |
| }; | |
| static const struct inode_operations btrfs_symlink_inode_operations = { | |
| .get_link = page_get_link, | |
| .getattr = btrfs_getattr, | |
| .setattr = btrfs_setattr, | |
| .permission = btrfs_permission, | |
| .listxattr = btrfs_listxattr, | |
| .update_time = btrfs_update_time, | |
| }; | |
| const struct dentry_operations btrfs_dentry_operations = { | |
| .d_delete = btrfs_dentry_delete, | |
| }; |