| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (C) 2007 Oracle. All rights reserved. | |
| */ | |
| #include <linux/fs.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/time.h> | |
| #include <linux/init.h> | |
| #include <linux/string.h> | |
| #include <linux/backing-dev.h> | |
| #include <linux/falloc.h> | |
| #include <linux/filelock.h> | |
| #include <linux/writeback.h> | |
| #include <linux/compat.h> | |
| #include <linux/slab.h> | |
| #include <linux/btrfs.h> | |
| #include <linux/uio.h> | |
| #include <linux/iversion.h> | |
| #include <linux/fsverity.h> | |
| #include "ctree.h" | |
| #include "direct-io.h" | |
| #include "disk-io.h" | |
| #include "transaction.h" | |
| #include "btrfs_inode.h" | |
| #include "tree-log.h" | |
| #include "locking.h" | |
| #include "qgroup.h" | |
| #include "compression.h" | |
| #include "delalloc-space.h" | |
| #include "reflink.h" | |
| #include "subpage.h" | |
| #include "fs.h" | |
| #include "accessors.h" | |
| #include "extent-tree.h" | |
| #include "file-item.h" | |
| #include "ioctl.h" | |
| #include "file.h" | |
| #include "super.h" | |
| #include "print-tree.h" | |
| /* | |
| * Unlock folio after btrfs_file_write() is done with it. | |
| */ | |
| static void btrfs_drop_folio(struct btrfs_fs_info *fs_info, struct folio *folio, | |
| u64 pos, u64 copied) | |
| { | |
| u64 block_start = round_down(pos, fs_info->sectorsize); | |
| u64 block_len = round_up(pos + copied, fs_info->sectorsize) - block_start; | |
| ASSERT(block_len <= U32_MAX); | |
| folio_unlock(folio); | |
| folio_put(folio); | |
| } | |
| /* | |
| * After copy_folio_from_iter_atomic(), update the following things for delalloc: | |
| * - Mark newly dirtied folio as DELALLOC in the io tree. | |
| * Used to advise which range is to be written back. | |
| * - Mark modified folio as Uptodate/Dirty | |
| * - Update inode size for past EOF write | |
| */ | |
| int btrfs_dirty_folio(struct btrfs_inode *inode, struct folio *folio, loff_t pos, | |
| size_t write_bytes, struct extent_state **cached, bool noreserve) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| int ret = 0; | |
| u64 num_bytes; | |
| u64 start_pos; | |
| u64 end_of_last_block; | |
| const u64 end_pos = pos + write_bytes; | |
| loff_t isize = i_size_read(&inode->vfs_inode); | |
| unsigned int extra_bits = 0; | |
| if (write_bytes == 0) | |
| return 0; | |
| if (noreserve) | |
| extra_bits |= EXTENT_NORESERVE; | |
| start_pos = round_down(pos, fs_info->sectorsize); | |
| num_bytes = round_up(end_pos - start_pos, fs_info->sectorsize); | |
| ASSERT(num_bytes <= U32_MAX); | |
| ASSERT(folio_pos(folio) <= pos && folio_next_pos(folio) >= end_pos); | |
| end_of_last_block = start_pos + num_bytes - 1; | |
| ret = btrfs_reset_extent_delalloc(inode, start_pos, end_of_last_block, | |
| extra_bits, cached); | |
| if (ret) | |
| return ret; | |
| btrfs_folio_clamp_set_uptodate(fs_info, folio, start_pos, num_bytes); | |
| btrfs_folio_clamp_set_dirty(fs_info, folio, start_pos, num_bytes); | |
| /* | |
| * we've only changed i_size in ram, and we haven't updated | |
| * the disk i_size. There is no need to log the inode | |
| * at this time. | |
| */ | |
| if (end_pos > isize) | |
| i_size_write(&inode->vfs_inode, end_pos); | |
| return 0; | |
| } | |
| /* | |
| * this is very complex, but the basic idea is to drop all extents | |
| * in the range start - end. hint_block is filled in with a block number | |
| * that would be a good hint to the block allocator for this file. | |
| * | |
| * If an extent intersects the range but is not entirely inside the range | |
| * it is either truncated or split. Anything entirely inside the range | |
| * is deleted from the tree. | |
| * | |
| * Note: the VFS' inode number of bytes is not updated, it's up to the caller | |
| * to deal with that. We set the field 'bytes_found' of the arguments structure | |
| * with the number of allocated bytes found in the target range, so that the | |
| * caller can update the inode's number of bytes in an atomic way when | |
| * replacing extents in a range to avoid races with stat(2). | |
| */ | |
| int btrfs_drop_extents(struct btrfs_trans_handle *trans, | |
| struct btrfs_root *root, struct btrfs_inode *inode, | |
| struct btrfs_drop_extents_args *args) | |
| { | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct extent_buffer *leaf; | |
| struct btrfs_file_extent_item *fi; | |
| struct btrfs_key key; | |
| struct btrfs_key new_key; | |
| u64 ino = btrfs_ino(inode); | |
| u64 search_start = args->start; | |
| u64 disk_bytenr = 0; | |
| u64 num_bytes = 0; | |
| u64 extent_offset = 0; | |
| u64 extent_end = 0; | |
| u64 last_end = args->start; | |
| int del_nr = 0; | |
| int del_slot = 0; | |
| int extent_type; | |
| int recow; | |
| int ret; | |
| int modify_tree = -1; | |
| int update_refs; | |
| bool found = false; | |
| struct btrfs_path *path = args->path; | |
| args->bytes_found = 0; | |
| args->extent_inserted = false; | |
| /* Must always have a path if ->replace_extent is true */ | |
| ASSERT(!(args->replace_extent && !args->path)); | |
| if (!path) { | |
| path = btrfs_alloc_path(); | |
| if (!path) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| } | |
| if (args->drop_cache) | |
| btrfs_drop_extent_map_range(inode, args->start, args->end - 1, false); | |
| if (data_race(args->start >= inode->disk_i_size) && !args->replace_extent) | |
| modify_tree = 0; | |
| update_refs = (btrfs_root_id(root) != BTRFS_TREE_LOG_OBJECTID); | |
| while (1) { | |
| recow = 0; | |
| ret = btrfs_lookup_file_extent(trans, root, path, ino, | |
| search_start, modify_tree); | |
| if (ret < 0) | |
| break; | |
| if (ret > 0 && path->slots[0] > 0 && search_start == args->start) { | |
| leaf = path->nodes[0]; | |
| btrfs_item_key_to_cpu(leaf, &key, path->slots[0] - 1); | |
| if (key.objectid == ino && | |
| key.type == BTRFS_EXTENT_DATA_KEY) | |
| path->slots[0]--; | |
| } | |
| ret = 0; | |
| next_slot: | |
| leaf = path->nodes[0]; | |
| if (path->slots[0] >= btrfs_header_nritems(leaf)) { | |
| if (WARN_ON(del_nr > 0)) { | |
| btrfs_print_leaf(leaf); | |
| ret = -EINVAL; | |
| break; | |
| } | |
| ret = btrfs_next_leaf(root, path); | |
| if (ret < 0) | |
| break; | |
| if (ret > 0) { | |
| ret = 0; | |
| break; | |
| } | |
| leaf = path->nodes[0]; | |
| recow = 1; | |
| } | |
| btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); | |
| if (key.objectid > ino) | |
| break; | |
| if (WARN_ON_ONCE(key.objectid < ino) || | |
| key.type < BTRFS_EXTENT_DATA_KEY) { | |
| ASSERT(del_nr == 0); | |
| path->slots[0]++; | |
| goto next_slot; | |
| } | |
| if (key.type > BTRFS_EXTENT_DATA_KEY || key.offset >= args->end) | |
| break; | |
| fi = btrfs_item_ptr(leaf, path->slots[0], | |
| struct btrfs_file_extent_item); | |
| extent_type = btrfs_file_extent_type(leaf, fi); | |
| if (extent_type == BTRFS_FILE_EXTENT_REG || | |
| extent_type == BTRFS_FILE_EXTENT_PREALLOC) { | |
| disk_bytenr = btrfs_file_extent_disk_bytenr(leaf, fi); | |
| num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi); | |
| extent_offset = btrfs_file_extent_offset(leaf, fi); | |
| extent_end = key.offset + | |
| btrfs_file_extent_num_bytes(leaf, fi); | |
| } else if (extent_type == BTRFS_FILE_EXTENT_INLINE) { | |
| extent_end = key.offset + | |
| btrfs_file_extent_ram_bytes(leaf, fi); | |
| } else { | |
| /* can't happen */ | |
| BUG(); | |
| } | |
| /* | |
| * Don't skip extent items representing 0 byte lengths. They | |
| * used to be created (bug) if while punching holes we hit | |
| * -ENOSPC condition. So if we find one here, just ensure we | |
| * delete it, otherwise we would insert a new file extent item | |
| * with the same key (offset) as that 0 bytes length file | |
| * extent item in the call to setup_items_for_insert() later | |
| * in this function. | |
| */ | |
| if (extent_end == key.offset && extent_end >= search_start) { | |
| last_end = extent_end; | |
| goto delete_extent_item; | |
| } | |
| if (extent_end <= search_start) { | |
| path->slots[0]++; | |
| goto next_slot; | |
| } | |
| found = true; | |
| search_start = max(key.offset, args->start); | |
| if (recow || !modify_tree) { | |
| modify_tree = -1; | |
| btrfs_release_path(path); | |
| continue; | |
| } | |
| /* | |
| * | - range to drop - | | |
| * | -------- extent -------- | | |
| */ | |
| if (args->start > key.offset && args->end < extent_end) { | |
| if (WARN_ON(del_nr > 0)) { | |
| btrfs_print_leaf(leaf); | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (extent_type == BTRFS_FILE_EXTENT_INLINE) { | |
| ret = -EOPNOTSUPP; | |
| break; | |
| } | |
| memcpy(&new_key, &key, sizeof(new_key)); | |
| new_key.offset = args->start; | |
| ret = btrfs_duplicate_item(trans, root, path, | |
| &new_key); | |
| if (ret == -EAGAIN) { | |
| btrfs_release_path(path); | |
| continue; | |
| } | |
| if (ret < 0) | |
| break; | |
| leaf = path->nodes[0]; | |
| fi = btrfs_item_ptr(leaf, path->slots[0] - 1, | |
| struct btrfs_file_extent_item); | |
| btrfs_set_file_extent_num_bytes(leaf, fi, | |
| args->start - key.offset); | |
| fi = btrfs_item_ptr(leaf, path->slots[0], | |
| struct btrfs_file_extent_item); | |
| extent_offset += args->start - key.offset; | |
| btrfs_set_file_extent_offset(leaf, fi, extent_offset); | |
| btrfs_set_file_extent_num_bytes(leaf, fi, | |
| extent_end - args->start); | |
| if (update_refs && disk_bytenr > 0) { | |
| struct btrfs_ref ref = { | |
| .action = BTRFS_ADD_DELAYED_REF, | |
| .bytenr = disk_bytenr, | |
| .num_bytes = num_bytes, | |
| .parent = 0, | |
| .owning_root = btrfs_root_id(root), | |
| .ref_root = btrfs_root_id(root), | |
| }; | |
| btrfs_init_data_ref(&ref, new_key.objectid, | |
| args->start - extent_offset, | |
| 0, false); | |
| ret = btrfs_inc_extent_ref(trans, &ref); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| break; | |
| } | |
| } | |
| key.offset = args->start; | |
| } | |
| /* | |
| * From here on out we will have actually dropped something, so | |
| * last_end can be updated. | |
| */ | |
| last_end = extent_end; | |
| /* | |
| * | ---- range to drop ----- | | |
| * | -------- extent -------- | | |
| */ | |
| if (args->start <= key.offset && args->end < extent_end) { | |
| if (extent_type == BTRFS_FILE_EXTENT_INLINE) { | |
| ret = -EOPNOTSUPP; | |
| break; | |
| } | |
| memcpy(&new_key, &key, sizeof(new_key)); | |
| new_key.offset = args->end; | |
| btrfs_set_item_key_safe(trans, path, &new_key); | |
| extent_offset += args->end - key.offset; | |
| btrfs_set_file_extent_offset(leaf, fi, extent_offset); | |
| btrfs_set_file_extent_num_bytes(leaf, fi, | |
| extent_end - args->end); | |
| if (update_refs && disk_bytenr > 0) | |
| args->bytes_found += args->end - key.offset; | |
| break; | |
| } | |
| search_start = extent_end; | |
| /* | |
| * | ---- range to drop ----- | | |
| * | -------- extent -------- | | |
| */ | |
| if (args->start > key.offset && args->end >= extent_end) { | |
| if (WARN_ON(del_nr > 0)) { | |
| btrfs_print_leaf(leaf); | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (extent_type == BTRFS_FILE_EXTENT_INLINE) { | |
| ret = -EOPNOTSUPP; | |
| break; | |
| } | |
| btrfs_set_file_extent_num_bytes(leaf, fi, | |
| args->start - key.offset); | |
| if (update_refs && disk_bytenr > 0) | |
| args->bytes_found += extent_end - args->start; | |
| if (args->end == extent_end) | |
| break; | |
| path->slots[0]++; | |
| goto next_slot; | |
| } | |
| /* | |
| * | ---- range to drop ----- | | |
| * | ------ extent ------ | | |
| */ | |
| if (args->start <= key.offset && args->end >= extent_end) { | |
| delete_extent_item: | |
| if (del_nr == 0) { | |
| del_slot = path->slots[0]; | |
| del_nr = 1; | |
| } else { | |
| if (WARN_ON(del_slot + del_nr != path->slots[0])) { | |
| btrfs_print_leaf(leaf); | |
| ret = -EINVAL; | |
| break; | |
| } | |
| del_nr++; | |
| } | |
| if (update_refs && | |
| extent_type == BTRFS_FILE_EXTENT_INLINE) { | |
| args->bytes_found += extent_end - key.offset; | |
| extent_end = ALIGN(extent_end, | |
| fs_info->sectorsize); | |
| } else if (update_refs && disk_bytenr > 0) { | |
| struct btrfs_ref ref = { | |
| .action = BTRFS_DROP_DELAYED_REF, | |
| .bytenr = disk_bytenr, | |
| .num_bytes = num_bytes, | |
| .parent = 0, | |
| .owning_root = btrfs_root_id(root), | |
| .ref_root = btrfs_root_id(root), | |
| }; | |
| btrfs_init_data_ref(&ref, key.objectid, | |
| key.offset - extent_offset, | |
| 0, false); | |
| ret = btrfs_free_extent(trans, &ref); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| break; | |
| } | |
| args->bytes_found += extent_end - key.offset; | |
| } | |
| if (args->end == extent_end) | |
| break; | |
| if (path->slots[0] + 1 < btrfs_header_nritems(leaf)) { | |
| path->slots[0]++; | |
| goto next_slot; | |
| } | |
| ret = btrfs_del_items(trans, root, path, del_slot, | |
| del_nr); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| break; | |
| } | |
| del_nr = 0; | |
| del_slot = 0; | |
| btrfs_release_path(path); | |
| continue; | |
| } | |
| BUG(); | |
| } | |
| if (!ret && del_nr > 0) { | |
| /* | |
| * Set path->slots[0] to first slot, so that after the delete | |
| * if items are move off from our leaf to its immediate left or | |
| * right neighbor leafs, we end up with a correct and adjusted | |
| * path->slots[0] for our insertion (if args->replace_extent). | |
| */ | |
| path->slots[0] = del_slot; | |
| ret = btrfs_del_items(trans, root, path, del_slot, del_nr); | |
| if (ret) | |
| btrfs_abort_transaction(trans, ret); | |
| } | |
| leaf = path->nodes[0]; | |
| /* | |
| * If btrfs_del_items() was called, it might have deleted a leaf, in | |
| * which case it unlocked our path, so check path->locks[0] matches a | |
| * write lock. | |
| */ | |
| if (!ret && args->replace_extent && | |
| path->locks[0] == BTRFS_WRITE_LOCK && | |
| btrfs_leaf_free_space(leaf) >= | |
| sizeof(struct btrfs_item) + args->extent_item_size) { | |
| key.objectid = ino; | |
| key.type = BTRFS_EXTENT_DATA_KEY; | |
| key.offset = args->start; | |
| if (!del_nr && path->slots[0] < btrfs_header_nritems(leaf)) { | |
| struct btrfs_key slot_key; | |
| btrfs_item_key_to_cpu(leaf, &slot_key, path->slots[0]); | |
| if (btrfs_comp_cpu_keys(&key, &slot_key) > 0) | |
| path->slots[0]++; | |
| } | |
| btrfs_setup_item_for_insert(trans, root, path, &key, | |
| args->extent_item_size); | |
| args->extent_inserted = true; | |
| } | |
| if (!args->path) | |
| btrfs_free_path(path); | |
| else if (!args->extent_inserted) | |
| btrfs_release_path(path); | |
| out: | |
| args->drop_end = found ? min(args->end, last_end) : args->end; | |
| return ret; | |
| } | |
| static bool extent_mergeable(struct extent_buffer *leaf, int slot, u64 objectid, | |
| u64 bytenr, u64 orig_offset, u64 *start, u64 *end) | |
| { | |
| struct btrfs_file_extent_item *fi; | |
| struct btrfs_key key; | |
| u64 extent_end; | |
| if (slot < 0 || slot >= btrfs_header_nritems(leaf)) | |
| return false; | |
| btrfs_item_key_to_cpu(leaf, &key, slot); | |
| if (key.objectid != objectid || key.type != BTRFS_EXTENT_DATA_KEY) | |
| return false; | |
| fi = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item); | |
| if (btrfs_file_extent_type(leaf, fi) != BTRFS_FILE_EXTENT_REG || | |
| btrfs_file_extent_disk_bytenr(leaf, fi) != bytenr || | |
| btrfs_file_extent_offset(leaf, fi) != key.offset - orig_offset || | |
| btrfs_file_extent_compression(leaf, fi) || | |
| btrfs_file_extent_encryption(leaf, fi) || | |
| btrfs_file_extent_other_encoding(leaf, fi)) | |
| return false; | |
| extent_end = key.offset + btrfs_file_extent_num_bytes(leaf, fi); | |
| if ((*start && *start != key.offset) || (*end && *end != extent_end)) | |
| return false; | |
| *start = key.offset; | |
| *end = extent_end; | |
| return true; | |
| } | |
| /* | |
| * Mark extent in the range start - end as written. | |
| * | |
| * This changes extent type from 'pre-allocated' to 'regular'. If only | |
| * part of extent is marked as written, the extent will be split into | |
| * two or three. | |
| */ | |
| int btrfs_mark_extent_written(struct btrfs_trans_handle *trans, | |
| struct btrfs_inode *inode, u64 start, u64 end) | |
| { | |
| struct btrfs_root *root = inode->root; | |
| struct extent_buffer *leaf; | |
| BTRFS_PATH_AUTO_FREE(path); | |
| struct btrfs_file_extent_item *fi; | |
| struct btrfs_ref ref = { 0 }; | |
| struct btrfs_key key; | |
| struct btrfs_key new_key; | |
| u64 bytenr; | |
| u64 num_bytes; | |
| u64 extent_end; | |
| u64 orig_offset; | |
| u64 other_start; | |
| u64 other_end; | |
| u64 split; | |
| int del_nr = 0; | |
| int del_slot = 0; | |
| int recow; | |
| int ret; | |
| u64 ino = btrfs_ino(inode); | |
| path = btrfs_alloc_path(); | |
| if (!path) | |
| return -ENOMEM; | |
| again: | |
| recow = 0; | |
| split = start; | |
| key.objectid = ino; | |
| key.type = BTRFS_EXTENT_DATA_KEY; | |
| key.offset = split; | |
| ret = btrfs_search_slot(trans, root, &key, path, -1, 1); | |
| if (ret < 0) | |
| return ret; | |
| if (ret > 0 && path->slots[0] > 0) | |
| path->slots[0]--; | |
| leaf = path->nodes[0]; | |
| btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); | |
| if (unlikely(key.objectid != ino || key.type != BTRFS_EXTENT_DATA_KEY)) { | |
| ret = -EINVAL; | |
| btrfs_abort_transaction(trans, ret); | |
| return ret; | |
| } | |
| fi = btrfs_item_ptr(leaf, path->slots[0], | |
| struct btrfs_file_extent_item); | |
| if (unlikely(btrfs_file_extent_type(leaf, fi) != BTRFS_FILE_EXTENT_PREALLOC)) { | |
| ret = -EINVAL; | |
| btrfs_abort_transaction(trans, ret); | |
| return ret; | |
| } | |
| extent_end = key.offset + btrfs_file_extent_num_bytes(leaf, fi); | |
| if (unlikely(key.offset > start || extent_end < end)) { | |
| ret = -EINVAL; | |
| btrfs_abort_transaction(trans, ret); | |
| return ret; | |
| } | |
| bytenr = btrfs_file_extent_disk_bytenr(leaf, fi); | |
| num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi); | |
| orig_offset = key.offset - btrfs_file_extent_offset(leaf, fi); | |
| memcpy(&new_key, &key, sizeof(new_key)); | |
| if (start == key.offset && end < extent_end) { | |
| other_start = 0; | |
| other_end = start; | |
| if (extent_mergeable(leaf, path->slots[0] - 1, | |
| ino, bytenr, orig_offset, | |
| &other_start, &other_end)) { | |
| new_key.offset = end; | |
| btrfs_set_item_key_safe(trans, path, &new_key); | |
| fi = btrfs_item_ptr(leaf, path->slots[0], | |
| struct btrfs_file_extent_item); | |
| btrfs_set_file_extent_generation(leaf, fi, | |
| trans->transid); | |
| btrfs_set_file_extent_num_bytes(leaf, fi, | |
| extent_end - end); | |
| btrfs_set_file_extent_offset(leaf, fi, | |
| end - orig_offset); | |
| fi = btrfs_item_ptr(leaf, path->slots[0] - 1, | |
| struct btrfs_file_extent_item); | |
| btrfs_set_file_extent_generation(leaf, fi, | |
| trans->transid); | |
| btrfs_set_file_extent_num_bytes(leaf, fi, | |
| end - other_start); | |
| goto mark_dirty; | |
| } | |
| } | |
| if (start > key.offset && end == extent_end) { | |
| other_start = end; | |
| other_end = 0; | |
| if (extent_mergeable(leaf, path->slots[0] + 1, | |
| ino, bytenr, orig_offset, | |
| &other_start, &other_end)) { | |
| fi = btrfs_item_ptr(leaf, path->slots[0], | |
| struct btrfs_file_extent_item); | |
| btrfs_set_file_extent_num_bytes(leaf, fi, | |
| start - key.offset); | |
| btrfs_set_file_extent_generation(leaf, fi, | |
| trans->transid); | |
| path->slots[0]++; | |
| new_key.offset = start; | |
| btrfs_set_item_key_safe(trans, path, &new_key); | |
| fi = btrfs_item_ptr(leaf, path->slots[0], | |
| struct btrfs_file_extent_item); | |
| btrfs_set_file_extent_generation(leaf, fi, | |
| trans->transid); | |
| btrfs_set_file_extent_num_bytes(leaf, fi, | |
| other_end - start); | |
| btrfs_set_file_extent_offset(leaf, fi, | |
| start - orig_offset); | |
| goto mark_dirty; | |
| } | |
| } | |
| while (start > key.offset || end < extent_end) { | |
| if (key.offset == start) | |
| split = end; | |
| new_key.offset = split; | |
| ret = btrfs_duplicate_item(trans, root, path, &new_key); | |
| if (ret == -EAGAIN) { | |
| btrfs_release_path(path); | |
| goto again; | |
| } | |
| if (unlikely(ret < 0)) { | |
| btrfs_abort_transaction(trans, ret); | |
| return ret; | |
| } | |
| leaf = path->nodes[0]; | |
| fi = btrfs_item_ptr(leaf, path->slots[0] - 1, | |
| struct btrfs_file_extent_item); | |
| btrfs_set_file_extent_generation(leaf, fi, trans->transid); | |
| btrfs_set_file_extent_num_bytes(leaf, fi, | |
| split - key.offset); | |
| fi = btrfs_item_ptr(leaf, path->slots[0], | |
| struct btrfs_file_extent_item); | |
| btrfs_set_file_extent_generation(leaf, fi, trans->transid); | |
| btrfs_set_file_extent_offset(leaf, fi, split - orig_offset); | |
| btrfs_set_file_extent_num_bytes(leaf, fi, | |
| extent_end - split); | |
| ref.action = BTRFS_ADD_DELAYED_REF; | |
| ref.bytenr = bytenr; | |
| ref.num_bytes = num_bytes; | |
| ref.parent = 0; | |
| ref.owning_root = btrfs_root_id(root); | |
| ref.ref_root = btrfs_root_id(root); | |
| btrfs_init_data_ref(&ref, ino, orig_offset, 0, false); | |
| ret = btrfs_inc_extent_ref(trans, &ref); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| return ret; | |
| } | |
| if (split == start) { | |
| key.offset = start; | |
| } else { | |
| if (unlikely(start != key.offset)) { | |
| ret = -EINVAL; | |
| btrfs_abort_transaction(trans, ret); | |
| return ret; | |
| } | |
| path->slots[0]--; | |
| extent_end = end; | |
| } | |
| recow = 1; | |
| } | |
| other_start = end; | |
| other_end = 0; | |
| ref.action = BTRFS_DROP_DELAYED_REF; | |
| ref.bytenr = bytenr; | |
| ref.num_bytes = num_bytes; | |
| ref.parent = 0; | |
| ref.owning_root = btrfs_root_id(root); | |
| ref.ref_root = btrfs_root_id(root); | |
| btrfs_init_data_ref(&ref, ino, orig_offset, 0, false); | |
| if (extent_mergeable(leaf, path->slots[0] + 1, | |
| ino, bytenr, orig_offset, | |
| &other_start, &other_end)) { | |
| if (recow) { | |
| btrfs_release_path(path); | |
| goto again; | |
| } | |
| extent_end = other_end; | |
| del_slot = path->slots[0] + 1; | |
| del_nr++; | |
| ret = btrfs_free_extent(trans, &ref); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| return ret; | |
| } | |
| } | |
| other_start = 0; | |
| other_end = start; | |
| if (extent_mergeable(leaf, path->slots[0] - 1, | |
| ino, bytenr, orig_offset, | |
| &other_start, &other_end)) { | |
| if (recow) { | |
| btrfs_release_path(path); | |
| goto again; | |
| } | |
| key.offset = other_start; | |
| del_slot = path->slots[0]; | |
| del_nr++; | |
| ret = btrfs_free_extent(trans, &ref); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| return ret; | |
| } | |
| } | |
| if (del_nr == 0) { | |
| fi = btrfs_item_ptr(leaf, path->slots[0], | |
| struct btrfs_file_extent_item); | |
| btrfs_set_file_extent_type(leaf, fi, | |
| BTRFS_FILE_EXTENT_REG); | |
| btrfs_set_file_extent_generation(leaf, fi, trans->transid); | |
| } else { | |
| fi = btrfs_item_ptr(leaf, del_slot - 1, | |
| struct btrfs_file_extent_item); | |
| btrfs_set_file_extent_type(leaf, fi, | |
| BTRFS_FILE_EXTENT_REG); | |
| btrfs_set_file_extent_generation(leaf, fi, trans->transid); | |
| btrfs_set_file_extent_num_bytes(leaf, fi, | |
| extent_end - key.offset); | |
| ret = btrfs_del_items(trans, root, path, del_slot, del_nr); | |
| if (unlikely(ret < 0)) { | |
| btrfs_abort_transaction(trans, ret); | |
| return ret; | |
| } | |
| } | |
| mark_dirty: | |
| ret = btrfs_inode_set_file_extent_range(inode, start, end - start); | |
| if (ret) | |
| btrfs_abort_transaction(trans, ret); | |
| return ret; | |
| } | |
| /* | |
| * On error return an unlocked folio and the error value | |
| * On success return a locked folio and 0 | |
| */ | |
| static int prepare_uptodate_folio(struct inode *inode, struct folio *folio, u64 pos, | |
| u64 len) | |
| { | |
| u64 clamp_start = max_t(u64, pos, folio_pos(folio)); | |
| u64 clamp_end = min_t(u64, pos + len, folio_next_pos(folio)); | |
| const u32 blocksize = inode_to_fs_info(inode)->sectorsize; | |
| int ret = 0; | |
| if (folio_test_uptodate(folio)) | |
| return 0; | |
| if (IS_ALIGNED(clamp_start, blocksize) && | |
| IS_ALIGNED(clamp_end, blocksize)) | |
| return 0; | |
| ret = btrfs_read_folio(NULL, folio); | |
| if (ret) | |
| return ret; | |
| folio_lock(folio); | |
| if (unlikely(!folio_test_uptodate(folio))) { | |
| folio_unlock(folio); | |
| return -EIO; | |
| } | |
| /* | |
| * Since btrfs_read_folio() will unlock the folio before it returns, | |
| * there is a window where btrfs_release_folio() can be called to | |
| * release the page. Here we check both inode mapping and page | |
| * private to make sure the page was not released. | |
| * | |
| * The private flag check is essential for subpage as we need to store | |
| * extra bitmap using folio private. | |
| */ | |
| if (folio->mapping != inode->i_mapping || !folio_test_private(folio)) { | |
| folio_unlock(folio); | |
| return -EAGAIN; | |
| } | |
| return 0; | |
| } | |
| static gfp_t get_prepare_gfp_flags(struct inode *inode, bool nowait) | |
| { | |
| gfp_t gfp; | |
| gfp = btrfs_alloc_write_mask(inode->i_mapping); | |
| if (nowait) { | |
| gfp &= ~__GFP_DIRECT_RECLAIM; | |
| gfp |= GFP_NOWAIT; | |
| } | |
| return gfp; | |
| } | |
| /* | |
| * Get folio into the page cache and lock it. | |
| */ | |
| static noinline int prepare_one_folio(struct inode *inode, struct folio **folio_ret, | |
| loff_t pos, size_t write_bytes, | |
| bool nowait) | |
| { | |
| const pgoff_t index = pos >> PAGE_SHIFT; | |
| gfp_t mask = get_prepare_gfp_flags(inode, nowait); | |
| fgf_t fgp_flags = (nowait ? FGP_WRITEBEGIN | FGP_NOWAIT : FGP_WRITEBEGIN) | | |
| fgf_set_order(write_bytes); | |
| struct folio *folio; | |
| int ret; | |
| again: | |
| folio = __filemap_get_folio(inode->i_mapping, index, fgp_flags, mask); | |
| if (IS_ERR(folio)) | |
| return PTR_ERR(folio); | |
| ret = set_folio_extent_mapped(folio); | |
| if (ret < 0) { | |
| folio_unlock(folio); | |
| folio_put(folio); | |
| return ret; | |
| } | |
| ret = prepare_uptodate_folio(inode, folio, pos, write_bytes); | |
| if (ret) { | |
| /* The folio is already unlocked. */ | |
| folio_put(folio); | |
| if (!nowait && ret == -EAGAIN) | |
| goto again; | |
| return ret; | |
| } | |
| *folio_ret = folio; | |
| return 0; | |
| } | |
| /* | |
| * Locks the extent and properly waits for data=ordered extents to finish | |
| * before allowing the folios to be modified. | |
| * | |
| * Return: | |
| * 0 - the extent is locked | |
| * -EAGAIN - need to prepare the folios again | |
| */ | |
| static noinline int | |
| lock_and_cleanup_extent(struct btrfs_inode *inode, struct folio *folio, | |
| loff_t pos, size_t write_bytes, | |
| u64 *lockstart, u64 *lockend, bool nowait, | |
| struct extent_state **cached_state) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| struct btrfs_ordered_extent *ordered; | |
| u64 start_pos; | |
| u64 last_pos; | |
| start_pos = round_down(pos, fs_info->sectorsize); | |
| last_pos = round_up(pos + write_bytes, fs_info->sectorsize) - 1; | |
| if (nowait) { | |
| if (!btrfs_try_lock_extent(&inode->io_tree, start_pos, | |
| last_pos, cached_state)) { | |
| folio_unlock(folio); | |
| folio_put(folio); | |
| return -EAGAIN; | |
| } | |
| } else { | |
| btrfs_lock_extent(&inode->io_tree, start_pos, last_pos, | |
| cached_state); | |
| } | |
| ordered = btrfs_lookup_ordered_range(inode, start_pos, | |
| last_pos - start_pos + 1); | |
| if (ordered && | |
| ordered->file_offset + ordered->num_bytes > start_pos && | |
| ordered->file_offset <= last_pos) { | |
| btrfs_unlock_extent(&inode->io_tree, start_pos, last_pos, | |
| cached_state); | |
| folio_unlock(folio); | |
| folio_put(folio); | |
| btrfs_start_ordered_extent(ordered); | |
| btrfs_put_ordered_extent(ordered); | |
| return -EAGAIN; | |
| } | |
| if (ordered) | |
| btrfs_put_ordered_extent(ordered); | |
| *lockstart = start_pos; | |
| *lockend = last_pos; | |
| /* | |
| * We should be called after prepare_one_folio() which should have locked | |
| * all pages in the range. | |
| */ | |
| WARN_ON(!folio_test_locked(folio)); | |
| return 0; | |
| } | |
| /* | |
| * Check if we can do nocow write into the range [@pos, @pos + @write_bytes) | |
| * | |
| * @pos: File offset. | |
| * @write_bytes: The length to write, will be updated to the nocow writeable | |
| * range. | |
| * @nowait: Indicate if we can block or not (non-blocking IO context). | |
| * | |
| * This function will flush ordered extents in the range to ensure proper | |
| * nocow checks. | |
| * | |
| * Return: | |
| * > 0 If we can nocow, and updates @write_bytes. | |
| * 0 If we can't do a nocow write. | |
| * -EAGAIN If we can't do a nocow write because snapshotting of the inode's | |
| * root is in progress or because we are in a non-blocking IO | |
| * context and need to block (@nowait is true). | |
| * < 0 If an error happened. | |
| * | |
| * NOTE: Callers need to call btrfs_check_nocow_unlock() if we return > 0. | |
| */ | |
| int btrfs_check_nocow_lock(struct btrfs_inode *inode, loff_t pos, | |
| size_t *write_bytes, bool nowait) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| struct btrfs_root *root = inode->root; | |
| struct extent_state *cached_state = NULL; | |
| u64 lockstart, lockend; | |
| u64 cur_offset; | |
| int ret = 0; | |
| if (!(inode->flags & (BTRFS_INODE_NODATACOW | BTRFS_INODE_PREALLOC))) | |
| return 0; | |
| if (!btrfs_drew_try_write_lock(&root->snapshot_lock)) | |
| return -EAGAIN; | |
| lockstart = round_down(pos, fs_info->sectorsize); | |
| lockend = round_up(pos + *write_bytes, | |
| fs_info->sectorsize) - 1; | |
| if (nowait) { | |
| if (!btrfs_try_lock_ordered_range(inode, lockstart, lockend, | |
| &cached_state)) { | |
| btrfs_drew_write_unlock(&root->snapshot_lock); | |
| return -EAGAIN; | |
| } | |
| } else { | |
| btrfs_lock_and_flush_ordered_range(inode, lockstart, lockend, | |
| &cached_state); | |
| } | |
| cur_offset = lockstart; | |
| while (cur_offset < lockend) { | |
| u64 num_bytes = lockend - cur_offset + 1; | |
| ret = can_nocow_extent(inode, cur_offset, &num_bytes, NULL, nowait); | |
| if (ret <= 0) { | |
| /* | |
| * If cur_offset == lockstart it means we haven't found | |
| * any extent against which we can NOCOW, so unlock the | |
| * snapshot lock. | |
| */ | |
| if (cur_offset == lockstart) | |
| btrfs_drew_write_unlock(&root->snapshot_lock); | |
| break; | |
| } | |
| cur_offset += num_bytes; | |
| } | |
| btrfs_unlock_extent(&inode->io_tree, lockstart, lockend, &cached_state); | |
| /* | |
| * cur_offset > lockstart means there's at least a partial range we can | |
| * NOCOW, and that range can cover one or more extents. | |
| */ | |
| if (cur_offset > lockstart) { | |
| *write_bytes = min_t(size_t, *write_bytes, cur_offset - pos); | |
| return 1; | |
| } | |
| return ret; | |
| } | |
| void btrfs_check_nocow_unlock(struct btrfs_inode *inode) | |
| { | |
| btrfs_drew_write_unlock(&inode->root->snapshot_lock); | |
| } | |
| int btrfs_write_check(struct kiocb *iocb, size_t count) | |
| { | |
| struct file *file = iocb->ki_filp; | |
| struct inode *inode = file_inode(file); | |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(inode); | |
| loff_t pos = iocb->ki_pos; | |
| int ret; | |
| loff_t oldsize; | |
| /* | |
| * Quickly bail out on NOWAIT writes if we don't have the nodatacow or | |
| * prealloc flags, as without those flags we always have to COW. We will | |
| * later check if we can really COW into the target range (using | |
| * can_nocow_extent() at btrfs_get_blocks_direct_write()). | |
| */ | |
| if ((iocb->ki_flags & IOCB_NOWAIT) && | |
| !(BTRFS_I(inode)->flags & (BTRFS_INODE_NODATACOW | BTRFS_INODE_PREALLOC))) | |
| return -EAGAIN; | |
| ret = file_remove_privs(file); | |
| if (ret) | |
| return ret; | |
| /* | |
| * We reserve space for updating the inode when we reserve space for the | |
| * extent we are going to write, so we will enospc out there. We don't | |
| * need to start yet another transaction to update the inode as we will | |
| * update the inode when we finish writing whatever data we write. | |
| */ | |
| if (!IS_NOCMTIME(inode)) { | |
| inode_set_mtime_to_ts(inode, inode_set_ctime_current(inode)); | |
| inode_inc_iversion(inode); | |
| } | |
| oldsize = i_size_read(inode); | |
| if (pos > oldsize) { | |
| /* Expand hole size to cover write data, preventing empty gap */ | |
| loff_t end_pos = round_up(pos + count, fs_info->sectorsize); | |
| ret = btrfs_cont_expand(BTRFS_I(inode), oldsize, end_pos); | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static void release_space(struct btrfs_inode *inode, struct extent_changeset *data_reserved, | |
| u64 start, u64 len, bool only_release_metadata) | |
| { | |
| if (len == 0) | |
| return; | |
| if (only_release_metadata) { | |
| btrfs_check_nocow_unlock(inode); | |
| btrfs_delalloc_release_metadata(inode, len, true); | |
| } else { | |
| const struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| btrfs_delalloc_release_space(inode, data_reserved, | |
| round_down(start, fs_info->sectorsize), | |
| len, true); | |
| } | |
| } | |
| /* | |
| * Reserve data and metadata space for this buffered write range. | |
| * | |
| * Return >0 for the number of bytes reserved, which is always block aligned. | |
| * Return <0 for error. | |
| */ | |
| static ssize_t reserve_space(struct btrfs_inode *inode, | |
| struct extent_changeset **data_reserved, | |
| u64 start, size_t *len, bool nowait, | |
| bool *only_release_metadata) | |
| { | |
| const struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| const unsigned int block_offset = (start & (fs_info->sectorsize - 1)); | |
| size_t reserve_bytes; | |
| int ret; | |
| ret = btrfs_check_data_free_space(inode, data_reserved, start, *len, nowait); | |
| if (ret < 0) { | |
| int can_nocow; | |
| if (nowait && (ret == -ENOSPC || ret == -EAGAIN)) | |
| return -EAGAIN; | |
| /* | |
| * If we don't have to COW at the offset, reserve metadata only. | |
| * write_bytes may get smaller than requested here. | |
| */ | |
| can_nocow = btrfs_check_nocow_lock(inode, start, len, nowait); | |
| if (can_nocow < 0) | |
| ret = can_nocow; | |
| if (can_nocow > 0) | |
| ret = 0; | |
| if (ret) | |
| return ret; | |
| *only_release_metadata = true; | |
| } | |
| reserve_bytes = round_up(*len + block_offset, fs_info->sectorsize); | |
| WARN_ON(reserve_bytes == 0); | |
| ret = btrfs_delalloc_reserve_metadata(inode, reserve_bytes, | |
| reserve_bytes, nowait); | |
| if (ret) { | |
| if (!*only_release_metadata) | |
| btrfs_free_reserved_data_space(inode, *data_reserved, | |
| start, *len); | |
| else | |
| btrfs_check_nocow_unlock(inode); | |
| if (nowait && ret == -ENOSPC) | |
| ret = -EAGAIN; | |
| return ret; | |
| } | |
| return reserve_bytes; | |
| } | |
| /* Shrink the reserved data and metadata space from @reserved_len to @new_len. */ | |
| static void shrink_reserved_space(struct btrfs_inode *inode, | |
| struct extent_changeset *data_reserved, | |
| u64 reserved_start, u64 reserved_len, | |
| u64 new_len, bool only_release_metadata) | |
| { | |
| const u64 diff = reserved_len - new_len; | |
| ASSERT(new_len <= reserved_len); | |
| btrfs_delalloc_shrink_extents(inode, reserved_len, new_len); | |
| if (only_release_metadata) | |
| btrfs_delalloc_release_metadata(inode, diff, true); | |
| else | |
| btrfs_delalloc_release_space(inode, data_reserved, | |
| reserved_start + new_len, diff, true); | |
| } | |
| /* Calculate the maximum amount of bytes we can write into one folio. */ | |
| static size_t calc_write_bytes(const struct btrfs_inode *inode, | |
| const struct iov_iter *iter, u64 start) | |
| { | |
| const size_t max_folio_size = mapping_max_folio_size(inode->vfs_inode.i_mapping); | |
| return min(max_folio_size - (start & (max_folio_size - 1)), | |
| iov_iter_count(iter)); | |
| } | |
| /* | |
| * Do the heavy-lifting work to copy one range into one folio of the page cache. | |
| * | |
| * Return > 0 in case we copied all bytes or just some of them. | |
| * Return 0 if no bytes were copied, in which case the caller should retry. | |
| * Return <0 on error. | |
| */ | |
| static int copy_one_range(struct btrfs_inode *inode, struct iov_iter *iter, | |
| struct extent_changeset **data_reserved, u64 start, | |
| bool nowait) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| struct extent_state *cached_state = NULL; | |
| size_t write_bytes = calc_write_bytes(inode, iter, start); | |
| size_t copied; | |
| const u64 reserved_start = round_down(start, fs_info->sectorsize); | |
| u64 reserved_len; | |
| struct folio *folio = NULL; | |
| u64 lockstart; | |
| u64 lockend; | |
| bool only_release_metadata = false; | |
| const unsigned int bdp_flags = (nowait ? BDP_ASYNC : 0); | |
| int ret; | |
| /* | |
| * Fault all pages before locking them in prepare_one_folio() to avoid | |
| * recursive lock. | |
| */ | |
| if (unlikely(fault_in_iov_iter_readable(iter, write_bytes))) | |
| return -EFAULT; | |
| extent_changeset_release(*data_reserved); | |
| ret = reserve_space(inode, data_reserved, start, &write_bytes, nowait, | |
| &only_release_metadata); | |
| if (ret < 0) | |
| return ret; | |
| reserved_len = ret; | |
| /* Write range must be inside the reserved range. */ | |
| ASSERT(reserved_start <= start, "reserved_start=%llu start=%llu", | |
| reserved_start, start); | |
| ASSERT(start + write_bytes <= reserved_start + reserved_len, | |
| "start=%llu write_bytes=%zu reserved_start=%llu reserved_len=%llu", | |
| start, write_bytes, reserved_start, reserved_len); | |
| again: | |
| ret = balance_dirty_pages_ratelimited_flags(inode->vfs_inode.i_mapping, | |
| bdp_flags); | |
| if (ret) { | |
| btrfs_delalloc_release_extents(inode, reserved_len); | |
| release_space(inode, *data_reserved, reserved_start, reserved_len, | |
| only_release_metadata); | |
| return ret; | |
| } | |
| ret = prepare_one_folio(&inode->vfs_inode, &folio, start, write_bytes, false); | |
| if (ret) { | |
| btrfs_delalloc_release_extents(inode, reserved_len); | |
| release_space(inode, *data_reserved, reserved_start, reserved_len, | |
| only_release_metadata); | |
| return ret; | |
| } | |
| /* | |
| * The reserved range goes beyond the current folio, shrink the reserved | |
| * space to the folio boundary. | |
| */ | |
| if (reserved_start + reserved_len > folio_next_pos(folio)) { | |
| const u64 last_block = folio_next_pos(folio); | |
| shrink_reserved_space(inode, *data_reserved, reserved_start, | |
| reserved_len, last_block - reserved_start, | |
| only_release_metadata); | |
| write_bytes = last_block - start; | |
| reserved_len = last_block - reserved_start; | |
| } | |
| ret = lock_and_cleanup_extent(inode, folio, start, write_bytes, | |
| &lockstart, &lockend, nowait, &cached_state); | |
| if (ret < 0) { | |
| if (!nowait) | |
| goto again; | |
| btrfs_delalloc_release_extents(inode, reserved_len); | |
| release_space(inode, *data_reserved, reserved_start, reserved_len, | |
| only_release_metadata); | |
| return ret; | |
| } | |
| copied = copy_folio_from_iter_atomic(folio, offset_in_folio(folio, start), | |
| write_bytes, iter); | |
| flush_dcache_folio(folio); | |
| if (unlikely(copied < write_bytes)) { | |
| u64 last_block; | |
| /* | |
| * The original write range doesn't need an uptodate folio as | |
| * the range is block aligned. But now a short copy happened. | |
| * We cannot handle it without an uptodate folio. | |
| * | |
| * So just revert the range and we will retry. | |
| */ | |
| if (!folio_test_uptodate(folio)) { | |
| iov_iter_revert(iter, copied); | |
| copied = 0; | |
| } | |
| /* No copied bytes, unlock, release reserved space and exit. */ | |
| if (copied == 0) { | |
| btrfs_unlock_extent(&inode->io_tree, lockstart, lockend, | |
| &cached_state); | |
| btrfs_delalloc_release_extents(inode, reserved_len); | |
| release_space(inode, *data_reserved, reserved_start, reserved_len, | |
| only_release_metadata); | |
| btrfs_drop_folio(fs_info, folio, start, copied); | |
| return 0; | |
| } | |
| /* Release the reserved space beyond the last block. */ | |
| last_block = round_up(start + copied, fs_info->sectorsize); | |
| shrink_reserved_space(inode, *data_reserved, reserved_start, | |
| reserved_len, last_block - reserved_start, | |
| only_release_metadata); | |
| reserved_len = last_block - reserved_start; | |
| } | |
| ret = btrfs_dirty_folio(inode, folio, start, copied, &cached_state, | |
| only_release_metadata); | |
| btrfs_unlock_extent(&inode->io_tree, lockstart, lockend, &cached_state); | |
| btrfs_delalloc_release_extents(inode, reserved_len); | |
| if (ret) { | |
| btrfs_drop_folio(fs_info, folio, start, copied); | |
| release_space(inode, *data_reserved, reserved_start, reserved_len, | |
| only_release_metadata); | |
| return ret; | |
| } | |
| if (only_release_metadata) | |
| btrfs_check_nocow_unlock(inode); | |
| btrfs_drop_folio(fs_info, folio, start, copied); | |
| return copied; | |
| } | |
| ssize_t btrfs_buffered_write(struct kiocb *iocb, struct iov_iter *iter) | |
| { | |
| struct file *file = iocb->ki_filp; | |
| loff_t pos; | |
| struct inode *inode = file_inode(file); | |
| struct extent_changeset *data_reserved = NULL; | |
| size_t num_written = 0; | |
| ssize_t ret; | |
| loff_t old_isize; | |
| unsigned int ilock_flags = 0; | |
| const bool nowait = (iocb->ki_flags & IOCB_NOWAIT); | |
| if (nowait) | |
| ilock_flags |= BTRFS_ILOCK_TRY; | |
| ret = btrfs_inode_lock(BTRFS_I(inode), ilock_flags); | |
| if (ret < 0) | |
| return ret; | |
| /* | |
| * We can only trust the isize with inode lock held, or it can race with | |
| * other buffered writes and cause incorrect call of | |
| * pagecache_isize_extended() to overwrite existing data. | |
| */ | |
| old_isize = i_size_read(inode); | |
| ret = generic_write_checks(iocb, iter); | |
| if (ret <= 0) | |
| goto out; | |
| ret = btrfs_write_check(iocb, ret); | |
| if (ret < 0) | |
| goto out; | |
| pos = iocb->ki_pos; | |
| while (iov_iter_count(iter) > 0) { | |
| ret = copy_one_range(BTRFS_I(inode), iter, &data_reserved, pos, nowait); | |
| if (ret < 0) | |
| break; | |
| pos += ret; | |
| num_written += ret; | |
| cond_resched(); | |
| } | |
| extent_changeset_free(data_reserved); | |
| if (num_written > 0) { | |
| pagecache_isize_extended(inode, old_isize, iocb->ki_pos); | |
| iocb->ki_pos += num_written; | |
| } | |
| out: | |
| btrfs_inode_unlock(BTRFS_I(inode), ilock_flags); | |
| return num_written ? num_written : ret; | |
| } | |
| static ssize_t btrfs_encoded_write(struct kiocb *iocb, struct iov_iter *from, | |
| const struct btrfs_ioctl_encoded_io_args *encoded) | |
| { | |
| struct file *file = iocb->ki_filp; | |
| struct inode *inode = file_inode(file); | |
| loff_t count; | |
| ssize_t ret; | |
| btrfs_inode_lock(BTRFS_I(inode), 0); | |
| count = encoded->len; | |
| ret = generic_write_checks_count(iocb, &count); | |
| if (ret == 0 && count != encoded->len) { | |
| /* | |
| * The write got truncated by generic_write_checks_count(). We | |
| * can't do a partial encoded write. | |
| */ | |
| ret = -EFBIG; | |
| } | |
| if (ret || encoded->len == 0) | |
| goto out; | |
| ret = btrfs_write_check(iocb, encoded->len); | |
| if (ret < 0) | |
| goto out; | |
| ret = btrfs_do_encoded_write(iocb, from, encoded); | |
| out: | |
| btrfs_inode_unlock(BTRFS_I(inode), 0); | |
| return ret; | |
| } | |
| ssize_t btrfs_do_write_iter(struct kiocb *iocb, struct iov_iter *from, | |
| const struct btrfs_ioctl_encoded_io_args *encoded) | |
| { | |
| struct file *file = iocb->ki_filp; | |
| struct btrfs_inode *inode = BTRFS_I(file_inode(file)); | |
| ssize_t num_written, num_sync; | |
| if (btrfs_is_shutdown(inode->root->fs_info)) | |
| return -EIO; | |
| /* | |
| * If the fs flips readonly due to some impossible error, although we | |
| * have opened a file as writable, we have to stop this write operation | |
| * to ensure consistency. | |
| */ | |
| if (unlikely(BTRFS_FS_ERROR(inode->root->fs_info))) | |
| return -EROFS; | |
| if (encoded && (iocb->ki_flags & IOCB_NOWAIT)) | |
| return -EOPNOTSUPP; | |
| if (encoded) { | |
| num_written = btrfs_encoded_write(iocb, from, encoded); | |
| num_sync = encoded->len; | |
| } else if (iocb->ki_flags & IOCB_DIRECT) { | |
| num_written = btrfs_direct_write(iocb, from); | |
| num_sync = num_written; | |
| } else { | |
| num_written = btrfs_buffered_write(iocb, from); | |
| num_sync = num_written; | |
| } | |
| btrfs_set_inode_last_sub_trans(inode); | |
| if (num_sync > 0) { | |
| num_sync = generic_write_sync(iocb, num_sync); | |
| if (num_sync < 0) | |
| num_written = num_sync; | |
| } | |
| return num_written; | |
| } | |
| static ssize_t btrfs_file_write_iter(struct kiocb *iocb, struct iov_iter *from) | |
| { | |
| return btrfs_do_write_iter(iocb, from, NULL); | |
| } | |
| int btrfs_release_file(struct inode *inode, struct file *filp) | |
| { | |
| struct btrfs_file_private *private = filp->private_data; | |
| if (private) { | |
| kfree(private->filldir_buf); | |
| btrfs_free_extent_state(private->llseek_cached_state); | |
| kfree(private); | |
| filp->private_data = NULL; | |
| } | |
| /* | |
| * Set by setattr when we are about to truncate a file from a non-zero | |
| * size to a zero size. This tries to flush down new bytes that may | |
| * have been written if the application were using truncate to replace | |
| * a file in place. | |
| */ | |
| if (test_and_clear_bit(BTRFS_INODE_FLUSH_ON_CLOSE, | |
| &BTRFS_I(inode)->runtime_flags)) | |
| filemap_flush(inode->i_mapping); | |
| return 0; | |
| } | |
| static int start_ordered_ops(struct btrfs_inode *inode, loff_t start, loff_t end) | |
| { | |
| int ret; | |
| struct blk_plug plug; | |
| /* | |
| * This is only called in fsync, which would do synchronous writes, so | |
| * a plug can merge adjacent IOs as much as possible. Esp. in case of | |
| * multiple disks using raid profile, a large IO can be split to | |
| * several segments of stripe length (currently 64K). | |
| */ | |
| blk_start_plug(&plug); | |
| ret = btrfs_fdatawrite_range(inode, start, end); | |
| blk_finish_plug(&plug); | |
| return ret; | |
| } | |
| static inline bool skip_inode_logging(const struct btrfs_log_ctx *ctx) | |
| { | |
| struct btrfs_inode *inode = ctx->inode; | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| if (btrfs_inode_in_log(inode, btrfs_get_fs_generation(fs_info)) && | |
| list_empty(&ctx->ordered_extents)) | |
| return true; | |
| /* | |
| * If we are doing a fast fsync we can not bail out if the inode's | |
| * last_trans is <= then the last committed transaction, because we only | |
| * update the last_trans of the inode during ordered extent completion, | |
| * and for a fast fsync we don't wait for that, we only wait for the | |
| * writeback to complete. | |
| */ | |
| if (inode->last_trans <= btrfs_get_last_trans_committed(fs_info) && | |
| (test_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &inode->runtime_flags) || | |
| list_empty(&ctx->ordered_extents))) | |
| return true; | |
| return false; | |
| } | |
| /* | |
| * fsync call for both files and directories. This logs the inode into | |
| * the tree log instead of forcing full commits whenever possible. | |
| * | |
| * It needs to call filemap_fdatawait so that all ordered extent updates are | |
| * in the metadata btree are up to date for copying to the log. | |
| * | |
| * It drops the inode mutex before doing the tree log commit. This is an | |
| * important optimization for directories because holding the mutex prevents | |
| * new operations on the dir while we write to disk. | |
| */ | |
| int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync) | |
| { | |
| struct dentry *dentry = file_dentry(file); | |
| struct btrfs_inode *inode = BTRFS_I(d_inode(dentry)); | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| struct btrfs_trans_handle *trans; | |
| struct btrfs_log_ctx ctx; | |
| int ret = 0, err; | |
| u64 len; | |
| bool full_sync; | |
| bool skip_ilock = false; | |
| if (current->journal_info == BTRFS_TRANS_DIO_WRITE_STUB) { | |
| skip_ilock = true; | |
| current->journal_info = NULL; | |
| btrfs_assert_inode_locked(inode); | |
| } | |
| trace_btrfs_sync_file_enter(file, datasync); | |
| btrfs_init_log_ctx(&ctx, inode); | |
| /* | |
| * Always set the range to a full range, otherwise we can get into | |
| * several problems, from missing file extent items to represent holes | |
| * when not using the NO_HOLES feature, to log tree corruption due to | |
| * races between hole detection during logging and completion of ordered | |
| * extents outside the range, to missing checksums due to ordered extents | |
| * for which we flushed only a subset of their pages. | |
| */ | |
| start = 0; | |
| end = LLONG_MAX; | |
| len = (u64)LLONG_MAX + 1; | |
| /* | |
| * We write the dirty pages in the range and wait until they complete | |
| * out of the ->i_mutex. If so, we can flush the dirty pages by | |
| * multi-task, and make the performance up. See | |
| * btrfs_wait_ordered_range for an explanation of the ASYNC check. | |
| */ | |
| ret = start_ordered_ops(inode, start, end); | |
| if (ret) | |
| goto out; | |
| if (skip_ilock) | |
| down_write(&inode->i_mmap_lock); | |
| else | |
| btrfs_inode_lock(inode, BTRFS_ILOCK_MMAP); | |
| /* | |
| * Before we acquired the inode's lock and the mmap lock, someone may | |
| * have dirtied more pages in the target range. We need to make sure | |
| * that writeback for any such pages does not start while we are logging | |
| * the inode, because if it does, any of the following might happen when | |
| * we are not doing a full inode sync: | |
| * | |
| * 1) We log an extent after its writeback finishes but before its | |
| * checksums are added to the csum tree, leading to -EIO errors | |
| * when attempting to read the extent after a log replay. | |
| * | |
| * 2) We can end up logging an extent before its writeback finishes. | |
| * Therefore after the log replay we will have a file extent item | |
| * pointing to an unwritten extent (and no data checksums as well). | |
| * | |
| * So trigger writeback for any eventual new dirty pages and then we | |
| * wait for all ordered extents to complete below. | |
| */ | |
| ret = start_ordered_ops(inode, start, end); | |
| if (ret) { | |
| if (skip_ilock) | |
| up_write(&inode->i_mmap_lock); | |
| else | |
| btrfs_inode_unlock(inode, BTRFS_ILOCK_MMAP); | |
| goto out; | |
| } | |
| /* | |
| * Always check for the full sync flag while holding the inode's lock, | |
| * to avoid races with other tasks. The flag must be either set all the | |
| * time during logging or always off all the time while logging. | |
| * We check the flag here after starting delalloc above, because when | |
| * running delalloc the full sync flag may be set if we need to drop | |
| * extra extent map ranges due to temporary memory allocation failures. | |
| */ | |
| full_sync = test_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &inode->runtime_flags); | |
| /* | |
| * We have to do this here to avoid the priority inversion of waiting on | |
| * IO of a lower priority task while holding a transaction open. | |
| * | |
| * For a full fsync we wait for the ordered extents to complete while | |
| * for a fast fsync we wait just for writeback to complete, and then | |
| * attach the ordered extents to the transaction so that a transaction | |
| * commit waits for their completion, to avoid data loss if we fsync, | |
| * the current transaction commits before the ordered extents complete | |
| * and a power failure happens right after that. | |
| * | |
| * For zoned filesystem, if a write IO uses a ZONE_APPEND command, the | |
| * logical address recorded in the ordered extent may change. We need | |
| * to wait for the IO to stabilize the logical address. | |
| */ | |
| if (full_sync || btrfs_is_zoned(fs_info)) { | |
| ret = btrfs_wait_ordered_range(inode, start, len); | |
| clear_bit(BTRFS_INODE_COW_WRITE_ERROR, &inode->runtime_flags); | |
| } else { | |
| /* | |
| * Get our ordered extents as soon as possible to avoid doing | |
| * checksum lookups in the csum tree, and use instead the | |
| * checksums attached to the ordered extents. | |
| */ | |
| btrfs_get_ordered_extents_for_logging(inode, &ctx.ordered_extents); | |
| ret = filemap_fdatawait_range(inode->vfs_inode.i_mapping, start, end); | |
| if (ret) | |
| goto out_release_extents; | |
| /* | |
| * Check and clear the BTRFS_INODE_COW_WRITE_ERROR now after | |
| * starting and waiting for writeback, because for buffered IO | |
| * it may have been set during the end IO callback | |
| * (end_bbio_data_write() -> btrfs_finish_ordered_extent()) in | |
| * case an error happened and we need to wait for ordered | |
| * extents to complete so that any extent maps that point to | |
| * unwritten locations are dropped and we don't log them. | |
| */ | |
| if (test_and_clear_bit(BTRFS_INODE_COW_WRITE_ERROR, &inode->runtime_flags)) | |
| ret = btrfs_wait_ordered_range(inode, start, len); | |
| } | |
| if (ret) | |
| goto out_release_extents; | |
| if (skip_inode_logging(&ctx)) { | |
| /* | |
| * We've had everything committed since the last time we were | |
| * modified so clear this flag in case it was set for whatever | |
| * reason, it's no longer relevant. | |
| */ | |
| clear_bit(BTRFS_INODE_NEEDS_FULL_SYNC, &inode->runtime_flags); | |
| goto out_release_extents; | |
| } | |
| btrfs_init_log_ctx_scratch_eb(&ctx); | |
| /* | |
| * We use start here because we will need to wait on the IO to complete | |
| * in btrfs_sync_log, which could require joining a transaction (for | |
| * example checking cross references in the nocow path). If we use join | |
| * here we could get into a situation where we're waiting on IO to | |
| * happen that is blocked on a transaction trying to commit. With start | |
| * we inc the extwriter counter, so we wait for all extwriters to exit | |
| * before we start blocking joiners. This comment is to keep somebody | |
| * from thinking they are super smart and changing this to | |
| * btrfs_join_transaction *cough*Josef*cough*. | |
| */ | |
| trans = btrfs_start_transaction(root, 0); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| goto out_release_extents; | |
| } | |
| trans->in_fsync = true; | |
| ret = btrfs_log_dentry_safe(trans, dentry, &ctx); | |
| /* | |
| * Scratch eb no longer needed, release before syncing log or commit | |
| * transaction, to avoid holding unnecessary memory during such long | |
| * operations. | |
| */ | |
| if (ctx.scratch_eb) { | |
| free_extent_buffer(ctx.scratch_eb); | |
| ctx.scratch_eb = NULL; | |
| } | |
| btrfs_release_log_ctx_extents(&ctx); | |
| if (ret < 0) { | |
| /* Fallthrough and commit/free transaction. */ | |
| ret = BTRFS_LOG_FORCE_COMMIT; | |
| } | |
| /* we've logged all the items and now have a consistent | |
| * version of the file in the log. It is possible that | |
| * someone will come in and modify the file, but that's | |
| * fine because the log is consistent on disk, and we | |
| * have references to all of the file's extents | |
| * | |
| * It is possible that someone will come in and log the | |
| * file again, but that will end up using the synchronization | |
| * inside btrfs_sync_log to keep things safe. | |
| */ | |
| if (skip_ilock) | |
| up_write(&inode->i_mmap_lock); | |
| else | |
| btrfs_inode_unlock(inode, BTRFS_ILOCK_MMAP); | |
| if (ret == BTRFS_NO_LOG_SYNC) { | |
| ret = btrfs_end_transaction(trans); | |
| goto out; | |
| } | |
| /* We successfully logged the inode, attempt to sync the log. */ | |
| if (!ret) { | |
| ret = btrfs_sync_log(trans, root, &ctx); | |
| if (!ret) { | |
| ret = btrfs_end_transaction(trans); | |
| goto out; | |
| } | |
| } | |
| /* | |
| * At this point we need to commit the transaction because we had | |
| * btrfs_need_log_full_commit() or some other error. | |
| * | |
| * If we didn't do a full sync we have to stop the trans handle, wait on | |
| * the ordered extents, start it again and commit the transaction. If | |
| * we attempt to wait on the ordered extents here we could deadlock with | |
| * something like fallocate() that is holding the extent lock trying to | |
| * start a transaction while some other thread is trying to commit the | |
| * transaction while we (fsync) are currently holding the transaction | |
| * open. | |
| */ | |
| if (!full_sync) { | |
| ret = btrfs_end_transaction(trans); | |
| if (ret) | |
| goto out; | |
| ret = btrfs_wait_ordered_range(inode, start, len); | |
| if (ret) | |
| goto out; | |
| /* | |
| * This is safe to use here because we're only interested in | |
| * making sure the transaction that had the ordered extents is | |
| * committed. We aren't waiting on anything past this point, | |
| * we're purely getting the transaction and committing it. | |
| */ | |
| trans = btrfs_attach_transaction_barrier(root); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| /* | |
| * We committed the transaction and there's no currently | |
| * running transaction, this means everything we care | |
| * about made it to disk and we are done. | |
| */ | |
| if (ret == -ENOENT) | |
| ret = 0; | |
| goto out; | |
| } | |
| } | |
| ret = btrfs_commit_transaction(trans); | |
| out: | |
| free_extent_buffer(ctx.scratch_eb); | |
| ASSERT(list_empty(&ctx.list)); | |
| ASSERT(list_empty(&ctx.conflict_inodes)); | |
| ASSERT(ret <= 0, "ret=%d", ret); | |
| /* | |
| * Ordered extents might have started and completed before this fsync, | |
| * so check for any io errors and advance the writeback error sequence. | |
| */ | |
| err = file_check_and_advance_wb_err(file); | |
| if (!ret) | |
| ret = err; | |
| trace_btrfs_sync_file_exit(file, ret); | |
| return ret; | |
| out_release_extents: | |
| btrfs_release_log_ctx_extents(&ctx); | |
| if (skip_ilock) | |
| up_write(&inode->i_mmap_lock); | |
| else | |
| btrfs_inode_unlock(inode, BTRFS_ILOCK_MMAP); | |
| goto out; | |
| } | |
| /* | |
| * btrfs_page_mkwrite() is not allowed to change the file size as it gets | |
| * called from a page fault handler when a page is first dirtied. Hence we must | |
| * be careful to check for EOF conditions here. We set the page up correctly | |
| * for a written page which means we get ENOSPC checking when writing into | |
| * holes and correct delalloc and unwritten extent mapping on filesystems that | |
| * support these features. | |
| * | |
| * We are not allowed to take the i_mutex here so we have to play games to | |
| * protect against truncate races as the page could now be beyond EOF. Because | |
| * truncate_setsize() writes the inode size before removing pages, once we have | |
| * the page lock we can determine safely if the page is beyond EOF. If it is not | |
| * beyond EOF, then the page is guaranteed safe against truncation until we | |
| * unlock the page. | |
| */ | |
| static vm_fault_t btrfs_page_mkwrite(struct vm_fault *vmf) | |
| { | |
| struct page *page = vmf->page; | |
| struct folio *folio = page_folio(page); | |
| struct btrfs_inode *inode = BTRFS_I(file_inode(vmf->vma->vm_file)); | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| struct extent_io_tree *io_tree = &inode->io_tree; | |
| struct btrfs_ordered_extent *ordered; | |
| struct extent_state *cached_state = NULL; | |
| struct extent_changeset *data_reserved = NULL; | |
| unsigned long zero_start; | |
| loff_t size; | |
| size_t fsize = folio_size(folio); | |
| int ret; | |
| bool only_release_metadata = false; | |
| u64 reserved_space; | |
| u64 page_start; | |
| u64 page_end; | |
| u64 end; | |
| reserved_space = fsize; | |
| sb_start_pagefault(inode->vfs_inode.i_sb); | |
| page_start = folio_pos(folio); | |
| page_end = page_start + folio_size(folio) - 1; | |
| end = page_end; | |
| /* | |
| * Reserving delalloc space after obtaining the page lock can lead to | |
| * deadlock. For example, if a dirty page is locked by this function | |
| * and the call to btrfs_delalloc_reserve_space() ends up triggering | |
| * dirty page write out, then the btrfs_writepages() function could | |
| * end up waiting indefinitely to get a lock on the page currently | |
| * being processed by btrfs_page_mkwrite() function. | |
| */ | |
| ret = btrfs_check_data_free_space(inode, &data_reserved, page_start, | |
| reserved_space, false); | |
| if (ret < 0) { | |
| size_t write_bytes = reserved_space; | |
| if (btrfs_check_nocow_lock(inode, page_start, &write_bytes, false) <= 0) | |
| goto out_noreserve; | |
| only_release_metadata = true; | |
| /* | |
| * Can't write the whole range, there may be shared extents or | |
| * holes in the range, bail out with @only_release_metadata set | |
| * to true so that we unlock the nocow lock before returning the | |
| * error. | |
| */ | |
| if (write_bytes < reserved_space) | |
| goto out_noreserve; | |
| } | |
| ret = btrfs_delalloc_reserve_metadata(inode, reserved_space, | |
| reserved_space, false); | |
| if (ret < 0) { | |
| if (!only_release_metadata) | |
| btrfs_free_reserved_data_space(inode, data_reserved, | |
| page_start, reserved_space); | |
| goto out_noreserve; | |
| } | |
| ret = file_update_time(vmf->vma->vm_file); | |
| if (ret < 0) | |
| goto out; | |
| again: | |
| down_read(&inode->i_mmap_lock); | |
| folio_lock(folio); | |
| size = i_size_read(&inode->vfs_inode); | |
| if ((folio->mapping != inode->vfs_inode.i_mapping) || | |
| (page_start >= size)) { | |
| /* Page got truncated out from underneath us. */ | |
| goto out_unlock; | |
| } | |
| folio_wait_writeback(folio); | |
| btrfs_lock_extent(io_tree, page_start, page_end, &cached_state); | |
| ret = set_folio_extent_mapped(folio); | |
| if (ret < 0) { | |
| btrfs_unlock_extent(io_tree, page_start, page_end, &cached_state); | |
| goto out_unlock; | |
| } | |
| /* | |
| * We can't set the delalloc bits if there are pending ordered | |
| * extents. Drop our locks and wait for them to finish. | |
| */ | |
| ordered = btrfs_lookup_ordered_range(inode, page_start, fsize); | |
| if (ordered) { | |
| btrfs_unlock_extent(io_tree, page_start, page_end, &cached_state); | |
| folio_unlock(folio); | |
| up_read(&inode->i_mmap_lock); | |
| btrfs_start_ordered_extent(ordered); | |
| btrfs_put_ordered_extent(ordered); | |
| goto again; | |
| } | |
| if (folio_contains(folio, (size - 1) >> PAGE_SHIFT)) { | |
| reserved_space = round_up(size - page_start, fs_info->sectorsize); | |
| if (reserved_space < fsize) { | |
| const u64 to_free = fsize - reserved_space; | |
| end = page_start + reserved_space - 1; | |
| if (only_release_metadata) | |
| btrfs_delalloc_release_metadata(inode, to_free, true); | |
| else | |
| btrfs_delalloc_release_space(inode, data_reserved, | |
| end + 1, to_free, true); | |
| } | |
| } | |
| ret = btrfs_reset_extent_delalloc(inode, page_start, end, 0, &cached_state); | |
| if (ret < 0) { | |
| btrfs_unlock_extent(io_tree, page_start, page_end, &cached_state); | |
| goto out_unlock; | |
| } | |
| /* Page is wholly or partially inside EOF. */ | |
| if (page_start + folio_size(folio) > size) | |
| zero_start = offset_in_folio(folio, size); | |
| else | |
| zero_start = fsize; | |
| if (zero_start != fsize) | |
| folio_zero_range(folio, zero_start, folio_size(folio) - zero_start); | |
| btrfs_folio_set_dirty(fs_info, folio, page_start, end + 1 - page_start); | |
| btrfs_folio_set_uptodate(fs_info, folio, page_start, end + 1 - page_start); | |
| btrfs_set_inode_last_sub_trans(inode); | |
| if (only_release_metadata) | |
| btrfs_set_extent_bit(io_tree, page_start, end, EXTENT_NORESERVE, | |
| &cached_state); | |
| btrfs_unlock_extent(io_tree, page_start, page_end, &cached_state); | |
| up_read(&inode->i_mmap_lock); | |
| btrfs_delalloc_release_extents(inode, fsize); | |
| if (only_release_metadata) | |
| btrfs_check_nocow_unlock(inode); | |
| sb_end_pagefault(inode->vfs_inode.i_sb); | |
| extent_changeset_free(data_reserved); | |
| return VM_FAULT_LOCKED; | |
| out_unlock: | |
| folio_unlock(folio); | |
| up_read(&inode->i_mmap_lock); | |
| out: | |
| btrfs_delalloc_release_extents(inode, fsize); | |
| if (only_release_metadata) | |
| btrfs_delalloc_release_metadata(inode, reserved_space, true); | |
| else | |
| btrfs_delalloc_release_space(inode, data_reserved, page_start, | |
| reserved_space, true); | |
| out_noreserve: | |
| if (only_release_metadata) | |
| btrfs_check_nocow_unlock(inode); | |
| sb_end_pagefault(inode->vfs_inode.i_sb); | |
| extent_changeset_free(data_reserved); | |
| if (ret < 0) | |
| return vmf_error(ret); | |
| /* Make the VM retry the fault. */ | |
| return VM_FAULT_NOPAGE; | |
| } | |
| static const struct vm_operations_struct btrfs_file_vm_ops = { | |
| .fault = filemap_fault, | |
| .map_pages = filemap_map_pages, | |
| .page_mkwrite = btrfs_page_mkwrite, | |
| }; | |
| static int btrfs_file_mmap_prepare(struct vm_area_desc *desc) | |
| { | |
| struct file *filp = desc->file; | |
| struct address_space *mapping = filp->f_mapping; | |
| if (btrfs_is_shutdown(inode_to_fs_info(file_inode(filp)))) | |
| return -EIO; | |
| if (!mapping->a_ops->read_folio) | |
| return -ENOEXEC; | |
| file_accessed(filp); | |
| desc->vm_ops = &btrfs_file_vm_ops; | |
| return 0; | |
| } | |
| static bool hole_mergeable(struct btrfs_inode *inode, struct extent_buffer *leaf, | |
| int slot, u64 start, u64 end) | |
| { | |
| struct btrfs_file_extent_item *fi; | |
| struct btrfs_key key; | |
| if (slot < 0 || slot >= btrfs_header_nritems(leaf)) | |
| return false; | |
| btrfs_item_key_to_cpu(leaf, &key, slot); | |
| if (key.objectid != btrfs_ino(inode) || | |
| key.type != BTRFS_EXTENT_DATA_KEY) | |
| return false; | |
| fi = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item); | |
| if (btrfs_file_extent_type(leaf, fi) != BTRFS_FILE_EXTENT_REG) | |
| return false; | |
| if (btrfs_file_extent_disk_bytenr(leaf, fi)) | |
| return false; | |
| if (key.offset == end) | |
| return true; | |
| if (key.offset + btrfs_file_extent_num_bytes(leaf, fi) == start) | |
| return true; | |
| return false; | |
| } | |
| static int fill_holes(struct btrfs_trans_handle *trans, | |
| struct btrfs_inode *inode, | |
| struct btrfs_path *path, u64 offset, u64 end) | |
| { | |
| struct btrfs_fs_info *fs_info = trans->fs_info; | |
| struct btrfs_root *root = inode->root; | |
| struct extent_buffer *leaf; | |
| struct btrfs_file_extent_item *fi; | |
| struct extent_map *hole_em; | |
| struct btrfs_key key; | |
| int modify_slot = -1; | |
| int del_slot = -1; | |
| bool update_offset = false; | |
| u64 num_bytes = 0; | |
| int ret; | |
| if (btrfs_fs_incompat(fs_info, NO_HOLES)) | |
| goto out; | |
| key.objectid = btrfs_ino(inode); | |
| key.type = BTRFS_EXTENT_DATA_KEY; | |
| key.offset = offset; | |
| ret = btrfs_search_slot(trans, root, &key, path, -1, 1); | |
| if (ret <= 0) { | |
| /* | |
| * We should have dropped this offset, so if we find it then | |
| * something has gone horribly wrong. | |
| */ | |
| if (ret == 0) | |
| ret = -EINVAL; | |
| return ret; | |
| } | |
| leaf = path->nodes[0]; | |
| if (hole_mergeable(inode, leaf, path->slots[0] - 1, offset, end)) { | |
| fi = btrfs_item_ptr(leaf, path->slots[0] - 1, | |
| struct btrfs_file_extent_item); | |
| num_bytes = btrfs_file_extent_num_bytes(leaf, fi) + | |
| end - offset; | |
| modify_slot = path->slots[0] - 1; | |
| } | |
| if (hole_mergeable(inode, leaf, path->slots[0], offset, end)) { | |
| fi = btrfs_item_ptr(leaf, path->slots[0], | |
| struct btrfs_file_extent_item); | |
| if (modify_slot != -1) { | |
| num_bytes += btrfs_file_extent_num_bytes(leaf, fi); | |
| del_slot = path->slots[0]; | |
| } else { | |
| num_bytes = btrfs_file_extent_num_bytes(leaf, fi) + | |
| end - offset; | |
| modify_slot = path->slots[0]; | |
| update_offset = true; | |
| } | |
| } | |
| if (modify_slot >= 0) { | |
| fi = btrfs_item_ptr(leaf, modify_slot, | |
| struct btrfs_file_extent_item); | |
| btrfs_set_file_extent_num_bytes(leaf, fi, num_bytes); | |
| btrfs_set_file_extent_ram_bytes(leaf, fi, num_bytes); | |
| if (update_offset) { | |
| key.offset = offset; | |
| btrfs_set_item_key_safe(trans, path, &key); | |
| } | |
| btrfs_set_file_extent_offset(leaf, fi, 0); | |
| btrfs_set_file_extent_generation(leaf, fi, trans->transid); | |
| if (del_slot >= 0) { | |
| ret = btrfs_del_items(trans, root, path, del_slot, 1); | |
| if (ret) { | |
| btrfs_abort_transaction(trans, ret); | |
| btrfs_release_path(path); | |
| return ret; | |
| } | |
| } | |
| goto out; | |
| } | |
| btrfs_release_path(path); | |
| ret = btrfs_insert_hole_extent(trans, root, btrfs_ino(inode), offset, | |
| end - offset); | |
| if (ret) | |
| return ret; | |
| out: | |
| btrfs_release_path(path); | |
| hole_em = btrfs_alloc_extent_map(); | |
| if (!hole_em) { | |
| btrfs_drop_extent_map_range(inode, offset, end - 1, false); | |
| btrfs_set_inode_full_sync(inode); | |
| } else { | |
| hole_em->start = offset; | |
| hole_em->len = end - offset; | |
| hole_em->ram_bytes = hole_em->len; | |
| hole_em->disk_bytenr = EXTENT_MAP_HOLE; | |
| hole_em->disk_num_bytes = 0; | |
| hole_em->generation = trans->transid; | |
| ret = btrfs_replace_extent_map_range(inode, hole_em, true); | |
| btrfs_free_extent_map(hole_em); | |
| if (ret) | |
| btrfs_set_inode_full_sync(inode); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Find a hole extent on given inode and change start/len to the end of hole | |
| * extent.(hole/vacuum extent whose em->start <= start && | |
| * em->start + em->len > start) | |
| * When a hole extent is found, return 1 and modify start/len. | |
| */ | |
| static int find_first_non_hole(struct btrfs_inode *inode, u64 *start, u64 *len) | |
| { | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| struct extent_map *em; | |
| int ret = 0; | |
| em = btrfs_get_extent(inode, NULL, | |
| round_down(*start, fs_info->sectorsize), | |
| round_up(*len, fs_info->sectorsize)); | |
| if (IS_ERR(em)) | |
| return PTR_ERR(em); | |
| /* Hole or vacuum extent(only exists in no-hole mode) */ | |
| if (em->disk_bytenr == EXTENT_MAP_HOLE) { | |
| const u64 em_end = btrfs_extent_map_end(em); | |
| ret = 1; | |
| *len = (em_end > *start + *len) ? 0 : (*start + *len - em_end); | |
| *start = em_end; | |
| } | |
| btrfs_free_extent_map(em); | |
| return ret; | |
| } | |
| /* | |
| * Check if there is no folio in the range. | |
| * | |
| * We cannot utilize filemap_range_has_page() in a filemap with large folios | |
| * as we can hit the following false positive: | |
| * | |
| * start end | |
| * | | | |
| * |//|//|//|//| | | | | | | | |//|//| | |
| * \ / \ / | |
| * Folio A Folio B | |
| * | |
| * That large folio A and B cover the start and end indexes. | |
| * In that case filemap_range_has_page() will always return true, but the above | |
| * case is fine for btrfs_punch_hole_lock_range() usage. | |
| * | |
| * So here we only ensure that no other folios is in the range, excluding the | |
| * head/tail large folio. | |
| */ | |
| static bool check_range_has_page(struct inode *inode, u64 start, u64 end) | |
| { | |
| struct folio_batch fbatch; | |
| bool ret = false; | |
| /* | |
| * For subpage case, if the range is not at page boundary, we could | |
| * have pages at the leading/tailing part of the range. | |
| * This could lead to dead loop since filemap_range_has_page() | |
| * will always return true. | |
| * So here we need to do extra page alignment for | |
| * filemap_range_has_page(). | |
| * | |
| * And do not decrease page_lockend right now, as it can be 0. | |
| */ | |
| const u64 page_lockstart = round_up(start, PAGE_SIZE); | |
| const u64 page_lockend = round_down(end + 1, PAGE_SIZE); | |
| const pgoff_t start_index = page_lockstart >> PAGE_SHIFT; | |
| const pgoff_t end_index = (page_lockend - 1) >> PAGE_SHIFT; | |
| pgoff_t tmp = start_index; | |
| int found_folios; | |
| /* The same page or adjacent pages. */ | |
| if (page_lockend <= page_lockstart) | |
| return false; | |
| folio_batch_init(&fbatch); | |
| found_folios = filemap_get_folios(inode->i_mapping, &tmp, end_index, &fbatch); | |
| for (int i = 0; i < found_folios; i++) { | |
| struct folio *folio = fbatch.folios[i]; | |
| /* A large folio begins before the start. Not a target. */ | |
| if (folio->index < start_index) | |
| continue; | |
| /* A large folio extends beyond the end. Not a target. */ | |
| if (folio_next_index(folio) > end_index) | |
| continue; | |
| /* A folio doesn't cover the head/tail index. Found a target. */ | |
| ret = true; | |
| break; | |
| } | |
| folio_batch_release(&fbatch); | |
| return ret; | |
| } | |
| static void btrfs_punch_hole_lock_range(struct inode *inode, | |
| const u64 lockstart, const u64 lockend, | |
| struct extent_state **cached_state) | |
| { | |
| while (1) { | |
| truncate_pagecache_range(inode, lockstart, lockend); | |
| btrfs_lock_extent(&BTRFS_I(inode)->io_tree, lockstart, lockend, | |
| cached_state); | |
| /* | |
| * We can't have ordered extents in the range, nor dirty/writeback | |
| * pages, because we have locked the inode's VFS lock in exclusive | |
| * mode, we have locked the inode's i_mmap_lock in exclusive mode, | |
| * we have flushed all delalloc in the range and we have waited | |
| * for any ordered extents in the range to complete. | |
| * We can race with anyone reading pages from this range, so after | |
| * locking the range check if we have pages in the range, and if | |
| * we do, unlock the range and retry. | |
| */ | |
| if (!check_range_has_page(inode, lockstart, lockend)) | |
| break; | |
| btrfs_unlock_extent(&BTRFS_I(inode)->io_tree, lockstart, lockend, | |
| cached_state); | |
| } | |
| btrfs_assert_inode_range_clean(BTRFS_I(inode), lockstart, lockend); | |
| } | |
| static int btrfs_insert_replace_extent(struct btrfs_trans_handle *trans, | |
| struct btrfs_inode *inode, | |
| struct btrfs_path *path, | |
| struct btrfs_replace_extent_info *extent_info, | |
| const u64 replace_len, | |
| const u64 bytes_to_drop) | |
| { | |
| struct btrfs_fs_info *fs_info = trans->fs_info; | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_file_extent_item *extent; | |
| struct extent_buffer *leaf; | |
| struct btrfs_key key; | |
| int slot; | |
| int ret; | |
| if (replace_len == 0) | |
| return 0; | |
| if (extent_info->disk_offset == 0 && | |
| btrfs_fs_incompat(fs_info, NO_HOLES)) { | |
| btrfs_update_inode_bytes(inode, 0, bytes_to_drop); | |
| return 0; | |
| } | |
| key.objectid = btrfs_ino(inode); | |
| key.type = BTRFS_EXTENT_DATA_KEY; | |
| key.offset = extent_info->file_offset; | |
| ret = btrfs_insert_empty_item(trans, root, path, &key, | |
| sizeof(struct btrfs_file_extent_item)); | |
| if (ret) | |
| return ret; | |
| leaf = path->nodes[0]; | |
| slot = path->slots[0]; | |
| write_extent_buffer(leaf, extent_info->extent_buf, | |
| btrfs_item_ptr_offset(leaf, slot), | |
| sizeof(struct btrfs_file_extent_item)); | |
| extent = btrfs_item_ptr(leaf, slot, struct btrfs_file_extent_item); | |
| ASSERT(btrfs_file_extent_type(leaf, extent) != BTRFS_FILE_EXTENT_INLINE); | |
| btrfs_set_file_extent_offset(leaf, extent, extent_info->data_offset); | |
| btrfs_set_file_extent_num_bytes(leaf, extent, replace_len); | |
| if (extent_info->is_new_extent) | |
| btrfs_set_file_extent_generation(leaf, extent, trans->transid); | |
| btrfs_release_path(path); | |
| ret = btrfs_inode_set_file_extent_range(inode, extent_info->file_offset, | |
| replace_len); | |
| if (ret) | |
| return ret; | |
| /* If it's a hole, nothing more needs to be done. */ | |
| if (extent_info->disk_offset == 0) { | |
| btrfs_update_inode_bytes(inode, 0, bytes_to_drop); | |
| return 0; | |
| } | |
| btrfs_update_inode_bytes(inode, replace_len, bytes_to_drop); | |
| if (extent_info->is_new_extent && extent_info->insertions == 0) { | |
| key.objectid = extent_info->disk_offset; | |
| key.type = BTRFS_EXTENT_ITEM_KEY; | |
| key.offset = extent_info->disk_len; | |
| ret = btrfs_alloc_reserved_file_extent(trans, root, | |
| btrfs_ino(inode), | |
| extent_info->file_offset, | |
| extent_info->qgroup_reserved, | |
| &key); | |
| } else { | |
| struct btrfs_ref ref = { | |
| .action = BTRFS_ADD_DELAYED_REF, | |
| .bytenr = extent_info->disk_offset, | |
| .num_bytes = extent_info->disk_len, | |
| .owning_root = btrfs_root_id(root), | |
| .ref_root = btrfs_root_id(root), | |
| }; | |
| u64 ref_offset; | |
| ref_offset = extent_info->file_offset - extent_info->data_offset; | |
| btrfs_init_data_ref(&ref, btrfs_ino(inode), ref_offset, 0, false); | |
| ret = btrfs_inc_extent_ref(trans, &ref); | |
| } | |
| extent_info->insertions++; | |
| return ret; | |
| } | |
| /* | |
| * The respective range must have been previously locked, as well as the inode. | |
| * The end offset is inclusive (last byte of the range). | |
| * @extent_info is NULL for fallocate's hole punching and non-NULL when replacing | |
| * the file range with an extent. | |
| * When not punching a hole, we don't want to end up in a state where we dropped | |
| * extents without inserting a new one, so we must abort the transaction to avoid | |
| * a corruption. | |
| */ | |
| int btrfs_replace_file_extents(struct btrfs_inode *inode, | |
| struct btrfs_path *path, const u64 start, | |
| const u64 end, | |
| struct btrfs_replace_extent_info *extent_info, | |
| struct btrfs_trans_handle **trans_out) | |
| { | |
| struct btrfs_drop_extents_args drop_args = { 0 }; | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_fs_info *fs_info = root->fs_info; | |
| const u64 min_size = btrfs_calc_insert_metadata_size(fs_info, 1); | |
| u64 ino_size = round_up(inode->vfs_inode.i_size, fs_info->sectorsize); | |
| struct btrfs_trans_handle *trans = NULL; | |
| struct btrfs_block_rsv rsv; | |
| unsigned int rsv_count; | |
| u64 cur_offset; | |
| u64 len = end - start; | |
| int ret = 0; | |
| if (end <= start) | |
| return -EINVAL; | |
| btrfs_init_metadata_block_rsv(fs_info, &rsv, BTRFS_BLOCK_RSV_TEMP); | |
| rsv.size = min_size; | |
| rsv.failfast = true; | |
| /* | |
| * 1 - update the inode | |
| * 1 - removing the extents in the range | |
| * 1 - adding the hole extent if no_holes isn't set or if we are | |
| * replacing the range with a new extent | |
| */ | |
| if (!btrfs_fs_incompat(fs_info, NO_HOLES) || extent_info) | |
| rsv_count = 3; | |
| else | |
| rsv_count = 2; | |
| trans = btrfs_start_transaction(root, rsv_count); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| trans = NULL; | |
| goto out_release; | |
| } | |
| ret = btrfs_block_rsv_migrate(&fs_info->trans_block_rsv, &rsv, | |
| min_size, false); | |
| if (WARN_ON(ret)) | |
| goto out_trans; | |
| trans->block_rsv = &rsv; | |
| cur_offset = start; | |
| drop_args.path = path; | |
| drop_args.end = end + 1; | |
| drop_args.drop_cache = true; | |
| while (cur_offset < end) { | |
| drop_args.start = cur_offset; | |
| ret = btrfs_drop_extents(trans, root, inode, &drop_args); | |
| /* If we are punching a hole decrement the inode's byte count */ | |
| if (!extent_info) | |
| btrfs_update_inode_bytes(inode, 0, | |
| drop_args.bytes_found); | |
| if (ret != -ENOSPC) { | |
| /* | |
| * The only time we don't want to abort is if we are | |
| * attempting to clone a partial inline extent, in which | |
| * case we'll get EOPNOTSUPP. However if we aren't | |
| * clone we need to abort no matter what, because if we | |
| * got EOPNOTSUPP via prealloc then we messed up and | |
| * need to abort. | |
| */ | |
| if (unlikely(ret && | |
| (ret != -EOPNOTSUPP || | |
| (extent_info && extent_info->is_new_extent)))) | |
| btrfs_abort_transaction(trans, ret); | |
| break; | |
| } | |
| trans->block_rsv = &fs_info->trans_block_rsv; | |
| if (!extent_info && cur_offset < drop_args.drop_end && | |
| cur_offset < ino_size) { | |
| ret = fill_holes(trans, inode, path, cur_offset, | |
| drop_args.drop_end); | |
| if (unlikely(ret)) { | |
| /* | |
| * If we failed then we didn't insert our hole | |
| * entries for the area we dropped, so now the | |
| * fs is corrupted, so we must abort the | |
| * transaction. | |
| */ | |
| btrfs_abort_transaction(trans, ret); | |
| break; | |
| } | |
| } else if (!extent_info && cur_offset < drop_args.drop_end) { | |
| /* | |
| * We are past the i_size here, but since we didn't | |
| * insert holes we need to clear the mapped area so we | |
| * know to not set disk_i_size in this area until a new | |
| * file extent is inserted here. | |
| */ | |
| ret = btrfs_inode_clear_file_extent_range(inode, | |
| cur_offset, | |
| drop_args.drop_end - cur_offset); | |
| if (unlikely(ret)) { | |
| /* | |
| * We couldn't clear our area, so we could | |
| * presumably adjust up and corrupt the fs, so | |
| * we need to abort. | |
| */ | |
| btrfs_abort_transaction(trans, ret); | |
| break; | |
| } | |
| } | |
| if (extent_info && | |
| drop_args.drop_end > extent_info->file_offset) { | |
| u64 replace_len = drop_args.drop_end - | |
| extent_info->file_offset; | |
| ret = btrfs_insert_replace_extent(trans, inode, path, | |
| extent_info, replace_len, | |
| drop_args.bytes_found); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| break; | |
| } | |
| extent_info->data_len -= replace_len; | |
| extent_info->data_offset += replace_len; | |
| extent_info->file_offset += replace_len; | |
| } | |
| /* | |
| * We are releasing our handle on the transaction, balance the | |
| * dirty pages of the btree inode and flush delayed items, and | |
| * then get a new transaction handle, which may now point to a | |
| * new transaction in case someone else may have committed the | |
| * transaction we used to replace/drop file extent items. So | |
| * bump the inode's iversion and update mtime and ctime except | |
| * if we are called from a dedupe context. This is because a | |
| * power failure/crash may happen after the transaction is | |
| * committed and before we finish replacing/dropping all the | |
| * file extent items we need. | |
| */ | |
| inode_inc_iversion(&inode->vfs_inode); | |
| if (!extent_info || extent_info->update_times) | |
| inode_set_mtime_to_ts(&inode->vfs_inode, | |
| inode_set_ctime_current(&inode->vfs_inode)); | |
| ret = btrfs_update_inode(trans, inode); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| break; | |
| } | |
| btrfs_end_transaction(trans); | |
| btrfs_btree_balance_dirty(fs_info); | |
| trans = btrfs_start_transaction(root, rsv_count); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| trans = NULL; | |
| break; | |
| } | |
| ret = btrfs_block_rsv_migrate(&fs_info->trans_block_rsv, | |
| &rsv, min_size, false); | |
| if (WARN_ON(ret)) | |
| break; | |
| trans->block_rsv = &rsv; | |
| cur_offset = drop_args.drop_end; | |
| len = end - cur_offset; | |
| if (!extent_info && len) { | |
| ret = find_first_non_hole(inode, &cur_offset, &len); | |
| if (unlikely(ret < 0)) | |
| break; | |
| if (ret && !len) { | |
| ret = 0; | |
| break; | |
| } | |
| } | |
| } | |
| /* | |
| * If we were cloning, force the next fsync to be a full one since we | |
| * we replaced (or just dropped in the case of cloning holes when | |
| * NO_HOLES is enabled) file extent items and did not setup new extent | |
| * maps for the replacement extents (or holes). | |
| */ | |
| if (extent_info && !extent_info->is_new_extent) | |
| btrfs_set_inode_full_sync(inode); | |
| if (ret) | |
| goto out_trans; | |
| trans->block_rsv = &fs_info->trans_block_rsv; | |
| /* | |
| * If we are using the NO_HOLES feature we might have had already an | |
| * hole that overlaps a part of the region [lockstart, lockend] and | |
| * ends at (or beyond) lockend. Since we have no file extent items to | |
| * represent holes, drop_end can be less than lockend and so we must | |
| * make sure we have an extent map representing the existing hole (the | |
| * call to __btrfs_drop_extents() might have dropped the existing extent | |
| * map representing the existing hole), otherwise the fast fsync path | |
| * will not record the existence of the hole region | |
| * [existing_hole_start, lockend]. | |
| */ | |
| if (drop_args.drop_end <= end) | |
| drop_args.drop_end = end + 1; | |
| /* | |
| * Don't insert file hole extent item if it's for a range beyond eof | |
| * (because it's useless) or if it represents a 0 bytes range (when | |
| * cur_offset == drop_end). | |
| */ | |
| if (!extent_info && cur_offset < ino_size && | |
| cur_offset < drop_args.drop_end) { | |
| ret = fill_holes(trans, inode, path, cur_offset, | |
| drop_args.drop_end); | |
| if (unlikely(ret)) { | |
| /* Same comment as above. */ | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_trans; | |
| } | |
| } else if (!extent_info && cur_offset < drop_args.drop_end) { | |
| /* See the comment in the loop above for the reasoning here. */ | |
| ret = btrfs_inode_clear_file_extent_range(inode, cur_offset, | |
| drop_args.drop_end - cur_offset); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_trans; | |
| } | |
| } | |
| if (extent_info) { | |
| ret = btrfs_insert_replace_extent(trans, inode, path, | |
| extent_info, extent_info->data_len, | |
| drop_args.bytes_found); | |
| if (unlikely(ret)) { | |
| btrfs_abort_transaction(trans, ret); | |
| goto out_trans; | |
| } | |
| } | |
| out_trans: | |
| if (!trans) | |
| goto out_release; | |
| trans->block_rsv = &fs_info->trans_block_rsv; | |
| if (ret) | |
| btrfs_end_transaction(trans); | |
| else | |
| *trans_out = trans; | |
| out_release: | |
| btrfs_block_rsv_release(fs_info, &rsv, (u64)-1, NULL); | |
| return ret; | |
| } | |
| static int btrfs_punch_hole(struct file *file, loff_t offset, loff_t len) | |
| { | |
| struct inode *inode = file_inode(file); | |
| struct btrfs_fs_info *fs_info = inode_to_fs_info(inode); | |
| struct btrfs_root *root = BTRFS_I(inode)->root; | |
| struct extent_state *cached_state = NULL; | |
| struct btrfs_path *path; | |
| struct btrfs_trans_handle *trans = NULL; | |
| u64 lockstart; | |
| u64 lockend; | |
| u64 tail_start; | |
| u64 tail_len; | |
| const u64 orig_start = offset; | |
| const u64 orig_end = offset + len - 1; | |
| int ret = 0; | |
| bool same_block; | |
| u64 ino_size; | |
| bool truncated_block = false; | |
| bool updated_inode = false; | |
| btrfs_inode_lock(BTRFS_I(inode), BTRFS_ILOCK_MMAP); | |
| ret = btrfs_wait_ordered_range(BTRFS_I(inode), offset, len); | |
| if (ret) | |
| goto out_only_mutex; | |
| ino_size = round_up(inode->i_size, fs_info->sectorsize); | |
| ret = find_first_non_hole(BTRFS_I(inode), &offset, &len); | |
| if (ret < 0) | |
| goto out_only_mutex; | |
| if (ret && !len) { | |
| /* Already in a large hole */ | |
| ret = 0; | |
| goto out_only_mutex; | |
| } | |
| ret = file_modified(file); | |
| if (ret) | |
| goto out_only_mutex; | |
| lockstart = round_up(offset, fs_info->sectorsize); | |
| lockend = round_down(offset + len, fs_info->sectorsize) - 1; | |
| same_block = (offset >> fs_info->sectorsize_bits) == | |
| ((offset + len - 1) >> fs_info->sectorsize_bits); | |
| /* | |
| * Only do this if we are in the same block and we aren't doing the | |
| * entire block. | |
| */ | |
| if (same_block && len < fs_info->sectorsize) { | |
| if (offset < ino_size) { | |
| truncated_block = true; | |
| ret = btrfs_truncate_block(BTRFS_I(inode), offset + len - 1, | |
| orig_start, orig_end); | |
| } else { | |
| ret = 0; | |
| } | |
| goto out_only_mutex; | |
| } | |
| /* zero back part of the first block */ | |
| if (offset < ino_size) { | |
| truncated_block = true; | |
| ret = btrfs_truncate_block(BTRFS_I(inode), offset, orig_start, orig_end); | |
| if (ret) { | |
| btrfs_inode_unlock(BTRFS_I(inode), BTRFS_ILOCK_MMAP); | |
| return ret; | |
| } | |
| } | |
| /* Check the aligned pages after the first unaligned page, | |
| * if offset != orig_start, which means the first unaligned page | |
| * including several following pages are already in holes, | |
| * the extra check can be skipped */ | |
| if (offset == orig_start) { | |
| /* after truncate page, check hole again */ | |
| len = offset + len - lockstart; | |
| offset = lockstart; | |
| ret = find_first_non_hole(BTRFS_I(inode), &offset, &len); | |
| if (ret < 0) | |
| goto out_only_mutex; | |
| if (ret && !len) { | |
| ret = 0; | |
| goto out_only_mutex; | |
| } | |
| lockstart = offset; | |
| } | |
| /* Check the tail unaligned part is in a hole */ | |
| tail_start = lockend + 1; | |
| tail_len = offset + len - tail_start; | |
| if (tail_len) { | |
| ret = find_first_non_hole(BTRFS_I(inode), &tail_start, &tail_len); | |
| if (unlikely(ret < 0)) | |
| goto out_only_mutex; | |
| if (!ret) { | |
| /* zero the front end of the last page */ | |
| if (tail_start + tail_len < ino_size) { | |
| truncated_block = true; | |
| ret = btrfs_truncate_block(BTRFS_I(inode), | |
| tail_start + tail_len - 1, | |
| orig_start, orig_end); | |
| if (ret) | |
| goto out_only_mutex; | |
| } | |
| } | |
| } | |
| if (lockend < lockstart) { | |
| ret = 0; | |
| goto out_only_mutex; | |
| } | |
| btrfs_punch_hole_lock_range(inode, lockstart, lockend, &cached_state); | |
| path = btrfs_alloc_path(); | |
| if (!path) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| ret = btrfs_replace_file_extents(BTRFS_I(inode), path, lockstart, | |
| lockend, NULL, &trans); | |
| btrfs_free_path(path); | |
| if (ret) | |
| goto out; | |
| ASSERT(trans != NULL); | |
| inode_inc_iversion(inode); | |
| inode_set_mtime_to_ts(inode, inode_set_ctime_current(inode)); | |
| ret = btrfs_update_inode(trans, BTRFS_I(inode)); | |
| updated_inode = true; | |
| btrfs_end_transaction(trans); | |
| btrfs_btree_balance_dirty(fs_info); | |
| out: | |
| btrfs_unlock_extent(&BTRFS_I(inode)->io_tree, lockstart, lockend, | |
| &cached_state); | |
| out_only_mutex: | |
| if (!updated_inode && truncated_block && !ret) { | |
| /* | |
| * If we only end up zeroing part of a page, we still need to | |
| * update the inode item, so that all the time fields are | |
| * updated as well as the necessary btrfs inode in memory fields | |
| * for detecting, at fsync time, if the inode isn't yet in the | |
| * log tree or it's there but not up to date. | |
| */ | |
| struct timespec64 now = inode_set_ctime_current(inode); | |
| inode_inc_iversion(inode); | |
| inode_set_mtime_to_ts(inode, now); | |
| trans = btrfs_start_transaction(root, 1); | |
| if (IS_ERR(trans)) { | |
| ret = PTR_ERR(trans); | |
| } else { | |
| int ret2; | |
| ret = btrfs_update_inode(trans, BTRFS_I(inode)); | |
| ret2 = btrfs_end_transaction(trans); | |
| if (!ret) | |
| ret = ret2; | |
| } | |
| } | |
| btrfs_inode_unlock(BTRFS_I(inode), BTRFS_ILOCK_MMAP); | |
| return ret; | |
| } | |
| /* Helper structure to record which range is already reserved */ | |
| struct falloc_range { | |
| struct list_head list; | |
| u64 start; | |
| u64 len; | |
| }; | |
| /* | |
| * Helper function to add falloc range | |
| * | |
| * Caller should have locked the larger range of extent containing | |
| * [start, len) | |
| */ | |
| static int add_falloc_range(struct list_head *head, u64 start, u64 len) | |
| { | |
| struct falloc_range *range = NULL; | |
| if (!list_empty(head)) { | |
| /* | |
| * As fallocate iterates by bytenr order, we only need to check | |
| * the last range. | |
| */ | |
| range = list_last_entry(head, struct falloc_range, list); | |
| if (range->start + range->len == start) { | |
| range->len += len; | |
| return 0; | |
| } | |
| } | |
| range = kmalloc_obj(*range); | |
| if (!range) | |
| return -ENOMEM; | |
| range->start = start; | |
| range->len = len; | |
| list_add_tail(&range->list, head); | |
| return 0; | |
| } | |
| static int btrfs_fallocate_update_isize(struct inode *inode, | |
| const u64 end, | |
| const int mode) | |
| { | |
| struct btrfs_trans_handle *trans; | |
| struct btrfs_root *root = BTRFS_I(inode)->root; | |
| u64 range_start; | |
| u64 range_end; | |
| int ret; | |
| int ret2; | |
| if (mode & FALLOC_FL_KEEP_SIZE || end <= i_size_read(inode)) | |
| return 0; | |
| range_start = round_down(i_size_read(inode), root->fs_info->sectorsize); | |
| range_end = round_up(end, root->fs_info->sectorsize); | |
| ret = btrfs_inode_set_file_extent_range(BTRFS_I(inode), range_start, | |
| range_end - range_start); | |
| if (ret) | |
| return ret; | |
| trans = btrfs_start_transaction(root, 1); | |
| if (IS_ERR(trans)) | |
| return PTR_ERR(trans); | |
| inode_set_ctime_current(inode); | |
| i_size_write(inode, end); | |
| btrfs_inode_safe_disk_i_size_write(BTRFS_I(inode), 0); | |
| ret = btrfs_update_inode(trans, BTRFS_I(inode)); | |
| ret2 = btrfs_end_transaction(trans); | |
| return ret ? ret : ret2; | |
| } | |
| enum { | |
| RANGE_BOUNDARY_WRITTEN_EXTENT, | |
| RANGE_BOUNDARY_PREALLOC_EXTENT, | |
| RANGE_BOUNDARY_HOLE, | |
| }; | |
| static int btrfs_zero_range_check_range_boundary(struct btrfs_inode *inode, | |
| u64 offset) | |
| { | |
| const u32 sectorsize = inode->root->fs_info->sectorsize; | |
| struct extent_map *em; | |
| int ret; | |
| offset = round_down(offset, sectorsize); | |
| em = btrfs_get_extent(inode, NULL, offset, sectorsize); | |
| if (IS_ERR(em)) | |
| return PTR_ERR(em); | |
| if (em->disk_bytenr == EXTENT_MAP_HOLE) | |
| ret = RANGE_BOUNDARY_HOLE; | |
| else if (em->flags & EXTENT_FLAG_PREALLOC) | |
| ret = RANGE_BOUNDARY_PREALLOC_EXTENT; | |
| else | |
| ret = RANGE_BOUNDARY_WRITTEN_EXTENT; | |
| btrfs_free_extent_map(em); | |
| return ret; | |
| } | |
| static int btrfs_zero_range(struct inode *inode, | |
| loff_t offset, | |
| loff_t len, | |
| const int mode) | |
| { | |
| struct btrfs_fs_info *fs_info = BTRFS_I(inode)->root->fs_info; | |
| struct extent_map *em; | |
| struct extent_changeset *data_reserved = NULL; | |
| int ret; | |
| u64 alloc_hint = 0; | |
| const u32 sectorsize = fs_info->sectorsize; | |
| const u64 orig_start = offset; | |
| const u64 orig_end = offset + len - 1; | |
| u64 alloc_start = round_down(offset, sectorsize); | |
| u64 alloc_end = round_up(offset + len, sectorsize); | |
| u64 bytes_to_reserve = 0; | |
| bool space_reserved = false; | |
| em = btrfs_get_extent(BTRFS_I(inode), NULL, alloc_start, | |
| alloc_end - alloc_start); | |
| if (IS_ERR(em)) { | |
| ret = PTR_ERR(em); | |
| goto out; | |
| } | |
| /* | |
| * Avoid hole punching and extent allocation for some cases. More cases | |
| * could be considered, but these are unlikely common and we keep things | |
| * as simple as possible for now. Also, intentionally, if the target | |
| * range contains one or more prealloc extents together with regular | |
| * extents and holes, we drop all the existing extents and allocate a | |
| * new prealloc extent, so that we get a larger contiguous disk extent. | |
| */ | |
| if (em->start <= alloc_start && (em->flags & EXTENT_FLAG_PREALLOC)) { | |
| const u64 em_end = btrfs_extent_map_end(em); | |
| if (em_end >= offset + len) { | |
| /* | |
| * The whole range is already a prealloc extent, | |
| * do nothing except updating the inode's i_size if | |
| * needed. | |
| */ | |
| btrfs_free_extent_map(em); | |
| ret = btrfs_fallocate_update_isize(inode, offset + len, | |
| mode); | |
| goto out; | |
| } | |
| /* | |
| * Part of the range is already a prealloc extent, so operate | |
| * only on the remaining part of the range. | |
| */ | |
| alloc_start = em_end; | |
| ASSERT(IS_ALIGNED(alloc_start, sectorsize)); | |
| len = offset + len - alloc_start; | |
| offset = alloc_start; | |
| alloc_hint = btrfs_extent_map_block_start(em) + em->len; | |
| } | |
| btrfs_free_extent_map(em); | |
| if ((offset >> fs_info->sectorsize_bits) == | |
| ((offset + len - 1) >> fs_info->sectorsize_bits)) { | |
| em = btrfs_get_extent(BTRFS_I(inode), NULL, alloc_start, sectorsize); | |
| if (IS_ERR(em)) { | |
| ret = PTR_ERR(em); | |
| goto out; | |
| } | |
| if (em->flags & EXTENT_FLAG_PREALLOC) { | |
| btrfs_free_extent_map(em); | |
| ret = btrfs_fallocate_update_isize(inode, offset + len, | |
| mode); | |
| goto out; | |
| } | |
| if (len < sectorsize && em->disk_bytenr != EXTENT_MAP_HOLE) { | |
| btrfs_free_extent_map(em); | |
| ret = btrfs_truncate_block(BTRFS_I(inode), offset + len - 1, | |
| orig_start, orig_end); | |
| if (!ret) | |
| ret = btrfs_fallocate_update_isize(inode, | |
| offset + len, | |
| mode); | |
| return ret; | |
| } | |
| btrfs_free_extent_map(em); | |
| alloc_start = round_down(offset, sectorsize); | |
| alloc_end = alloc_start + sectorsize; | |
| goto reserve_space; | |
| } | |
| alloc_start = round_up(offset, sectorsize); | |
| alloc_end = round_down(offset + len, sectorsize); | |
| /* | |
| * For unaligned ranges, check the pages at the boundaries, they might | |
| * map to an extent, in which case we need to partially zero them, or | |
| * they might map to a hole, in which case we need our allocation range | |
| * to cover them. | |
| */ | |
| if (!IS_ALIGNED(offset, sectorsize)) { | |
| ret = btrfs_zero_range_check_range_boundary(BTRFS_I(inode), | |
| offset); | |
| if (ret < 0) | |
| goto out; | |
| if (ret == RANGE_BOUNDARY_HOLE) { | |
| alloc_start = round_down(offset, sectorsize); | |
| ret = 0; | |
| } else if (ret == RANGE_BOUNDARY_WRITTEN_EXTENT) { | |
| ret = btrfs_truncate_block(BTRFS_I(inode), offset, | |
| orig_start, orig_end); | |
| if (ret) | |
| goto out; | |
| } else { | |
| ret = 0; | |
| } | |
| } | |
| if (!IS_ALIGNED(offset + len, sectorsize)) { | |
| ret = btrfs_zero_range_check_range_boundary(BTRFS_I(inode), | |
| offset + len); | |
| if (ret < 0) | |
| goto out; | |
| if (ret == RANGE_BOUNDARY_HOLE) { | |
| alloc_end = round_up(offset + len, sectorsize); | |
| ret = 0; | |
| } else if (ret == RANGE_BOUNDARY_WRITTEN_EXTENT) { | |
| ret = btrfs_truncate_block(BTRFS_I(inode), offset + len - 1, | |
| orig_start, orig_end); | |
| if (ret) | |
| goto out; | |
| } else { | |
| ret = 0; | |
| } | |
| } | |
| reserve_space: | |
| if (alloc_start < alloc_end) { | |
| struct extent_state *cached_state = NULL; | |
| const u64 lockstart = alloc_start; | |
| const u64 lockend = alloc_end - 1; | |
| bytes_to_reserve = alloc_end - alloc_start; | |
| ret = btrfs_alloc_data_chunk_ondemand(BTRFS_I(inode), | |
| bytes_to_reserve); | |
| if (ret < 0) | |
| goto out; | |
| space_reserved = true; | |
| btrfs_punch_hole_lock_range(inode, lockstart, lockend, | |
| &cached_state); | |
| ret = btrfs_qgroup_reserve_data(BTRFS_I(inode), &data_reserved, | |
| alloc_start, bytes_to_reserve); | |
| if (ret) { | |
| btrfs_unlock_extent(&BTRFS_I(inode)->io_tree, lockstart, | |
| lockend, &cached_state); | |
| goto out; | |
| } | |
| ret = btrfs_prealloc_file_range(inode, mode, alloc_start, | |
| alloc_end - alloc_start, | |
| fs_info->sectorsize, | |
| offset + len, &alloc_hint); | |
| btrfs_unlock_extent(&BTRFS_I(inode)->io_tree, lockstart, lockend, | |
| &cached_state); | |
| /* btrfs_prealloc_file_range releases reserved space on error */ | |
| if (ret) { | |
| space_reserved = false; | |
| goto out; | |
| } | |
| } | |
| ret = btrfs_fallocate_update_isize(inode, offset + len, mode); | |
| out: | |
| if (ret && space_reserved) | |
| btrfs_free_reserved_data_space(BTRFS_I(inode), data_reserved, | |
| alloc_start, bytes_to_reserve); | |
| extent_changeset_free(data_reserved); | |
| return ret; | |
| } | |
| static long btrfs_fallocate(struct file *file, int mode, | |
| loff_t offset, loff_t len) | |
| { | |
| struct inode *inode = file_inode(file); | |
| struct extent_state *cached_state = NULL; | |
| struct extent_changeset *data_reserved = NULL; | |
| struct falloc_range *range; | |
| struct falloc_range *tmp; | |
| LIST_HEAD(reserve_list); | |
| u64 cur_offset; | |
| u64 last_byte; | |
| u64 alloc_start; | |
| u64 alloc_end; | |
| u64 alloc_hint = 0; | |
| u64 locked_end; | |
| u64 actual_end = 0; | |
| u64 data_space_needed = 0; | |
| u64 data_space_reserved = 0; | |
| u64 qgroup_reserved = 0; | |
| struct extent_map *em; | |
| int blocksize = BTRFS_I(inode)->root->fs_info->sectorsize; | |
| int ret; | |
| if (btrfs_is_shutdown(inode_to_fs_info(inode))) | |
| return -EIO; | |
| /* Do not allow fallocate in ZONED mode */ | |
| if (btrfs_is_zoned(inode_to_fs_info(inode))) | |
| return -EOPNOTSUPP; | |
| alloc_start = round_down(offset, blocksize); | |
| alloc_end = round_up(offset + len, blocksize); | |
| cur_offset = alloc_start; | |
| /* Make sure we aren't being give some crap mode */ | |
| if (mode & ~(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE | | |
| FALLOC_FL_ZERO_RANGE)) | |
| return -EOPNOTSUPP; | |
| if (mode & FALLOC_FL_PUNCH_HOLE) | |
| return btrfs_punch_hole(file, offset, len); | |
| btrfs_inode_lock(BTRFS_I(inode), BTRFS_ILOCK_MMAP); | |
| if (!(mode & FALLOC_FL_KEEP_SIZE) && offset + len > inode->i_size) { | |
| ret = inode_newsize_ok(inode, offset + len); | |
| if (ret) | |
| goto out; | |
| } | |
| ret = file_modified(file); | |
| if (ret) | |
| goto out; | |
| /* | |
| * TODO: Move these two operations after we have checked | |
| * accurate reserved space, or fallocate can still fail but | |
| * with page truncated or size expanded. | |
| * | |
| * But that's a minor problem and won't do much harm BTW. | |
| */ | |
| if (alloc_start > inode->i_size) { | |
| ret = btrfs_cont_expand(BTRFS_I(inode), i_size_read(inode), | |
| alloc_start); | |
| if (ret) | |
| goto out; | |
| } else if (offset + len > inode->i_size) { | |
| /* | |
| * If we are fallocating from the end of the file onward we | |
| * need to zero out the end of the block if i_size lands in the | |
| * middle of a block. | |
| */ | |
| ret = btrfs_truncate_block(BTRFS_I(inode), inode->i_size, | |
| inode->i_size, (u64)-1); | |
| if (ret) | |
| goto out; | |
| } | |
| /* | |
| * We have locked the inode at the VFS level (in exclusive mode) and we | |
| * have locked the i_mmap_lock lock (in exclusive mode). Now before | |
| * locking the file range, flush all dealloc in the range and wait for | |
| * all ordered extents in the range to complete. After this we can lock | |
| * the file range and, due to the previous locking we did, we know there | |
| * can't be more delalloc or ordered extents in the range. | |
| */ | |
| ret = btrfs_wait_ordered_range(BTRFS_I(inode), alloc_start, | |
| alloc_end - alloc_start); | |
| if (ret) | |
| goto out; | |
| if (mode & FALLOC_FL_ZERO_RANGE) { | |
| ret = btrfs_zero_range(inode, offset, len, mode); | |
| btrfs_inode_unlock(BTRFS_I(inode), BTRFS_ILOCK_MMAP); | |
| return ret; | |
| } | |
| locked_end = alloc_end - 1; | |
| btrfs_lock_extent(&BTRFS_I(inode)->io_tree, alloc_start, locked_end, | |
| &cached_state); | |
| btrfs_assert_inode_range_clean(BTRFS_I(inode), alloc_start, locked_end); | |
| /* First, check if we exceed the qgroup limit */ | |
| while (cur_offset < alloc_end) { | |
| em = btrfs_get_extent(BTRFS_I(inode), NULL, cur_offset, | |
| alloc_end - cur_offset); | |
| if (IS_ERR(em)) { | |
| ret = PTR_ERR(em); | |
| break; | |
| } | |
| last_byte = min(btrfs_extent_map_end(em), alloc_end); | |
| actual_end = min_t(u64, btrfs_extent_map_end(em), offset + len); | |
| last_byte = ALIGN(last_byte, blocksize); | |
| if (em->disk_bytenr == EXTENT_MAP_HOLE || | |
| (cur_offset >= inode->i_size && | |
| !(em->flags & EXTENT_FLAG_PREALLOC))) { | |
| const u64 range_len = last_byte - cur_offset; | |
| ret = add_falloc_range(&reserve_list, cur_offset, range_len); | |
| if (ret < 0) { | |
| btrfs_free_extent_map(em); | |
| break; | |
| } | |
| ret = btrfs_qgroup_reserve_data(BTRFS_I(inode), | |
| &data_reserved, cur_offset, range_len); | |
| if (ret < 0) { | |
| btrfs_free_extent_map(em); | |
| break; | |
| } | |
| qgroup_reserved += range_len; | |
| data_space_needed += range_len; | |
| } | |
| btrfs_free_extent_map(em); | |
| cur_offset = last_byte; | |
| } | |
| if (!ret && data_space_needed > 0) { | |
| /* | |
| * We are safe to reserve space here as we can't have delalloc | |
| * in the range, see above. | |
| */ | |
| ret = btrfs_alloc_data_chunk_ondemand(BTRFS_I(inode), | |
| data_space_needed); | |
| if (!ret) | |
| data_space_reserved = data_space_needed; | |
| } | |
| /* | |
| * If ret is still 0, means we're OK to fallocate. | |
| * Or just cleanup the list and exit. | |
| */ | |
| list_for_each_entry_safe(range, tmp, &reserve_list, list) { | |
| if (!ret) { | |
| ret = btrfs_prealloc_file_range(inode, mode, | |
| range->start, | |
| range->len, blocksize, | |
| offset + len, &alloc_hint); | |
| /* | |
| * btrfs_prealloc_file_range() releases space even | |
| * if it returns an error. | |
| */ | |
| data_space_reserved -= range->len; | |
| qgroup_reserved -= range->len; | |
| } else if (data_space_reserved > 0) { | |
| btrfs_free_reserved_data_space(BTRFS_I(inode), | |
| data_reserved, range->start, | |
| range->len); | |
| data_space_reserved -= range->len; | |
| qgroup_reserved -= range->len; | |
| } else if (qgroup_reserved > 0) { | |
| btrfs_qgroup_free_data(BTRFS_I(inode), data_reserved, | |
| range->start, range->len, NULL); | |
| qgroup_reserved -= range->len; | |
| } | |
| list_del(&range->list); | |
| kfree(range); | |
| } | |
| if (ret < 0) | |
| goto out_unlock; | |
| /* | |
| * We didn't need to allocate any more space, but we still extended the | |
| * size of the file so we need to update i_size and the inode item. | |
| */ | |
| ret = btrfs_fallocate_update_isize(inode, actual_end, mode); | |
| out_unlock: | |
| btrfs_unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, locked_end, | |
| &cached_state); | |
| out: | |
| btrfs_inode_unlock(BTRFS_I(inode), BTRFS_ILOCK_MMAP); | |
| extent_changeset_free(data_reserved); | |
| return ret; | |
| } | |
| /* | |
| * Helper for btrfs_find_delalloc_in_range(). Find a subrange in a given range | |
| * that has unflushed and/or flushing delalloc. There might be other adjacent | |
| * subranges after the one it found, so btrfs_find_delalloc_in_range() keeps | |
| * looping while it gets adjacent subranges, and merging them together. | |
| */ | |
| static bool find_delalloc_subrange(struct btrfs_inode *inode, u64 start, u64 end, | |
| struct extent_state **cached_state, | |
| bool *search_io_tree, | |
| u64 *delalloc_start_ret, u64 *delalloc_end_ret) | |
| { | |
| u64 len = end + 1 - start; | |
| u64 delalloc_len = 0; | |
| struct btrfs_ordered_extent *oe; | |
| u64 oe_start; | |
| u64 oe_end; | |
| /* | |
| * Search the io tree first for EXTENT_DELALLOC. If we find any, it | |
| * means we have delalloc (dirty pages) for which writeback has not | |
| * started yet. | |
| */ | |
| if (*search_io_tree) { | |
| spin_lock(&inode->lock); | |
| if (inode->delalloc_bytes > 0) { | |
| spin_unlock(&inode->lock); | |
| *delalloc_start_ret = start; | |
| delalloc_len = btrfs_count_range_bits(&inode->io_tree, | |
| delalloc_start_ret, end, | |
| len, EXTENT_DELALLOC, | |
| true, cached_state); | |
| } else { | |
| spin_unlock(&inode->lock); | |
| } | |
| } | |
| if (delalloc_len > 0) { | |
| /* | |
| * If delalloc was found then *delalloc_start_ret has a sector size | |
| * aligned value (rounded down). | |
| */ | |
| *delalloc_end_ret = *delalloc_start_ret + delalloc_len - 1; | |
| if (*delalloc_start_ret == start) { | |
| /* Delalloc for the whole range, nothing more to do. */ | |
| if (*delalloc_end_ret == end) | |
| return true; | |
| /* Else trim our search range for ordered extents. */ | |
| start = *delalloc_end_ret + 1; | |
| len = end + 1 - start; | |
| } | |
| } else { | |
| /* No delalloc, future calls don't need to search again. */ | |
| *search_io_tree = false; | |
| } | |
| /* | |
| * Now also check if there's any ordered extent in the range. | |
| * We do this because: | |
| * | |
| * 1) When delalloc is flushed, the file range is locked, we clear the | |
| * EXTENT_DELALLOC bit from the io tree and create an extent map and | |
| * an ordered extent for the write. So we might just have been called | |
| * after delalloc is flushed and before the ordered extent completes | |
| * and inserts the new file extent item in the subvolume's btree; | |
| * | |
| * 2) We may have an ordered extent created by flushing delalloc for a | |
| * subrange that starts before the subrange we found marked with | |
| * EXTENT_DELALLOC in the io tree. | |
| * | |
| * We could also use the extent map tree to find such delalloc that is | |
| * being flushed, but using the ordered extents tree is more efficient | |
| * because it's usually much smaller as ordered extents are removed from | |
| * the tree once they complete. With the extent maps, we may have them | |
| * in the extent map tree for a very long time, and they were either | |
| * created by previous writes or loaded by read operations. | |
| */ | |
| oe = btrfs_lookup_first_ordered_range(inode, start, len); | |
| if (!oe) | |
| return (delalloc_len > 0); | |
| /* The ordered extent may span beyond our search range. */ | |
| oe_start = max(oe->file_offset, start); | |
| oe_end = min(oe->file_offset + oe->num_bytes - 1, end); | |
| btrfs_put_ordered_extent(oe); | |
| /* Don't have unflushed delalloc, return the ordered extent range. */ | |
| if (delalloc_len == 0) { | |
| *delalloc_start_ret = oe_start; | |
| *delalloc_end_ret = oe_end; | |
| return true; | |
| } | |
| /* | |
| * We have both unflushed delalloc (io_tree) and an ordered extent. | |
| * If the ranges are adjacent returned a combined range, otherwise | |
| * return the leftmost range. | |
| */ | |
| if (oe_start < *delalloc_start_ret) { | |
| if (oe_end < *delalloc_start_ret) | |
| *delalloc_end_ret = oe_end; | |
| *delalloc_start_ret = oe_start; | |
| } else if (*delalloc_end_ret + 1 == oe_start) { | |
| *delalloc_end_ret = oe_end; | |
| } | |
| return true; | |
| } | |
| /* | |
| * Check if there's delalloc in a given range. | |
| * | |
| * @inode: The inode. | |
| * @start: The start offset of the range. It does not need to be | |
| * sector size aligned. | |
| * @end: The end offset (inclusive value) of the search range. | |
| * It does not need to be sector size aligned. | |
| * @cached_state: Extent state record used for speeding up delalloc | |
| * searches in the inode's io_tree. Can be NULL. | |
| * @delalloc_start_ret: Output argument, set to the start offset of the | |
| * subrange found with delalloc (may not be sector size | |
| * aligned). | |
| * @delalloc_end_ret: Output argument, set to he end offset (inclusive value) | |
| * of the subrange found with delalloc. | |
| * | |
| * Returns true if a subrange with delalloc is found within the given range, and | |
| * if so it sets @delalloc_start_ret and @delalloc_end_ret with the start and | |
| * end offsets of the subrange. | |
| */ | |
| bool btrfs_find_delalloc_in_range(struct btrfs_inode *inode, u64 start, u64 end, | |
| struct extent_state **cached_state, | |
| u64 *delalloc_start_ret, u64 *delalloc_end_ret) | |
| { | |
| u64 cur_offset = round_down(start, inode->root->fs_info->sectorsize); | |
| u64 prev_delalloc_end = 0; | |
| bool search_io_tree = true; | |
| bool ret = false; | |
| while (cur_offset <= end) { | |
| u64 delalloc_start; | |
| u64 delalloc_end; | |
| bool delalloc; | |
| delalloc = find_delalloc_subrange(inode, cur_offset, end, | |
| cached_state, &search_io_tree, | |
| &delalloc_start, | |
| &delalloc_end); | |
| if (!delalloc) | |
| break; | |
| if (prev_delalloc_end == 0) { | |
| /* First subrange found. */ | |
| *delalloc_start_ret = max(delalloc_start, start); | |
| *delalloc_end_ret = delalloc_end; | |
| ret = true; | |
| } else if (delalloc_start == prev_delalloc_end + 1) { | |
| /* Subrange adjacent to the previous one, merge them. */ | |
| *delalloc_end_ret = delalloc_end; | |
| } else { | |
| /* Subrange not adjacent to the previous one, exit. */ | |
| break; | |
| } | |
| prev_delalloc_end = delalloc_end; | |
| cur_offset = delalloc_end + 1; | |
| cond_resched(); | |
| } | |
| return ret; | |
| } | |
| /* | |
| * Check if there's a hole or delalloc range in a range representing a hole (or | |
| * prealloc extent) found in the inode's subvolume btree. | |
| * | |
| * @inode: The inode. | |
| * @whence: Seek mode (SEEK_DATA or SEEK_HOLE). | |
| * @start: Start offset of the hole region. It does not need to be sector | |
| * size aligned. | |
| * @end: End offset (inclusive value) of the hole region. It does not | |
| * need to be sector size aligned. | |
| * @start_ret: Return parameter, used to set the start of the subrange in the | |
| * hole that matches the search criteria (seek mode), if such | |
| * subrange is found (return value of the function is true). | |
| * The value returned here may not be sector size aligned. | |
| * | |
| * Returns true if a subrange matching the given seek mode is found, and if one | |
| * is found, it updates @start_ret with the start of the subrange. | |
| */ | |
| static bool find_desired_extent_in_hole(struct btrfs_inode *inode, int whence, | |
| struct extent_state **cached_state, | |
| u64 start, u64 end, u64 *start_ret) | |
| { | |
| u64 delalloc_start; | |
| u64 delalloc_end; | |
| bool delalloc; | |
| delalloc = btrfs_find_delalloc_in_range(inode, start, end, cached_state, | |
| &delalloc_start, &delalloc_end); | |
| if (delalloc && whence == SEEK_DATA) { | |
| *start_ret = delalloc_start; | |
| return true; | |
| } | |
| if (delalloc && whence == SEEK_HOLE) { | |
| /* | |
| * We found delalloc but it starts after out start offset. So we | |
| * have a hole between our start offset and the delalloc start. | |
| */ | |
| if (start < delalloc_start) { | |
| *start_ret = start; | |
| return true; | |
| } | |
| /* | |
| * Delalloc range starts at our start offset. | |
| * If the delalloc range's length is smaller than our range, | |
| * then it means we have a hole that starts where the delalloc | |
| * subrange ends. | |
| */ | |
| if (delalloc_end < end) { | |
| *start_ret = delalloc_end + 1; | |
| return true; | |
| } | |
| /* There's delalloc for the whole range. */ | |
| return false; | |
| } | |
| if (!delalloc && whence == SEEK_HOLE) { | |
| *start_ret = start; | |
| return true; | |
| } | |
| /* | |
| * No delalloc in the range and we are seeking for data. The caller has | |
| * to iterate to the next extent item in the subvolume btree. | |
| */ | |
| return false; | |
| } | |
| static loff_t find_desired_extent(struct file *file, loff_t offset, int whence) | |
| { | |
| struct btrfs_inode *inode = BTRFS_I(file->f_mapping->host); | |
| struct btrfs_file_private *private; | |
| struct btrfs_fs_info *fs_info = inode->root->fs_info; | |
| struct extent_state *cached_state = NULL; | |
| struct extent_state **delalloc_cached_state; | |
| const loff_t i_size = i_size_read(&inode->vfs_inode); | |
| const u64 ino = btrfs_ino(inode); | |
| struct btrfs_root *root = inode->root; | |
| struct btrfs_path *path; | |
| struct btrfs_key key; | |
| u64 last_extent_end; | |
| u64 lockstart; | |
| u64 lockend; | |
| u64 start; | |
| int ret; | |
| bool found = false; | |
| if (i_size == 0 || offset >= i_size) | |
| return -ENXIO; | |
| /* | |
| * Quick path. If the inode has no prealloc extents and its number of | |
| * bytes used matches its i_size, then it can not have holes. | |
| */ | |
| if (whence == SEEK_HOLE && | |
| !(inode->flags & BTRFS_INODE_PREALLOC) && | |
| inode_get_bytes(&inode->vfs_inode) == i_size) | |
| return i_size; | |
| spin_lock(&inode->lock); | |
| private = file->private_data; | |
| spin_unlock(&inode->lock); | |
| if (private && private->owner_task != current) { | |
| /* | |
| * Not allocated by us, don't use it as its cached state is used | |
| * by the task that allocated it and we don't want neither to | |
| * mess with it nor get incorrect results because it reflects an | |
| * invalid state for the current task. | |
| */ | |
| private = NULL; | |
| } else if (!private) { | |
| private = kzalloc_obj(*private); | |
| /* | |
| * No worries if memory allocation failed. | |
| * The private structure is used only for speeding up multiple | |
| * lseek SEEK_HOLE/DATA calls to a file when there's delalloc, | |
| * so everything will still be correct. | |
| */ | |
| if (private) { | |
| bool free = false; | |
| private->owner_task = current; | |
| spin_lock(&inode->lock); | |
| if (file->private_data) | |
| free = true; | |
| else | |
| file->private_data = private; | |
| spin_unlock(&inode->lock); | |
| if (free) { | |
| kfree(private); | |
| private = NULL; | |
| } | |
| } | |
| } | |
| if (private) | |
| delalloc_cached_state = &private->llseek_cached_state; | |
| else | |
| delalloc_cached_state = NULL; | |
| /* | |
| * offset can be negative, in this case we start finding DATA/HOLE from | |
| * the very start of the file. | |
| */ | |
| start = max_t(loff_t, 0, offset); | |
| lockstart = round_down(start, fs_info->sectorsize); | |
| lockend = round_up(i_size, fs_info->sectorsize); | |
| if (lockend <= lockstart) | |
| lockend = lockstart + fs_info->sectorsize; | |
| lockend--; | |
| path = btrfs_alloc_path(); | |
| if (!path) | |
| return -ENOMEM; | |
| path->reada = READA_FORWARD; | |
| key.objectid = ino; | |
| key.type = BTRFS_EXTENT_DATA_KEY; | |
| key.offset = start; | |
| last_extent_end = lockstart; | |
| btrfs_lock_extent(&inode->io_tree, lockstart, lockend, &cached_state); | |
| ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); | |
| if (ret < 0) { | |
| goto out; | |
| } else if (ret > 0 && path->slots[0] > 0) { | |
| btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0] - 1); | |
| if (key.objectid == ino && key.type == BTRFS_EXTENT_DATA_KEY) | |
| path->slots[0]--; | |
| } | |
| while (start < i_size) { | |
| struct extent_buffer *leaf = path->nodes[0]; | |
| struct btrfs_file_extent_item *extent; | |
| u64 extent_end; | |
| u8 type; | |
| if (path->slots[0] >= btrfs_header_nritems(leaf)) { | |
| ret = btrfs_next_leaf(root, path); | |
| if (ret < 0) | |
| goto out; | |
| else if (ret > 0) | |
| break; | |
| leaf = path->nodes[0]; | |
| } | |
| btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); | |
| if (key.objectid != ino || key.type != BTRFS_EXTENT_DATA_KEY) | |
| break; | |
| extent_end = btrfs_file_extent_end(path); | |
| /* | |
| * In the first iteration we may have a slot that points to an | |
| * extent that ends before our start offset, so skip it. | |
| */ | |
| if (extent_end <= start) { | |
| path->slots[0]++; | |
| continue; | |
| } | |
| /* We have an implicit hole, NO_HOLES feature is likely set. */ | |
| if (last_extent_end < key.offset) { | |
| u64 search_start = last_extent_end; | |
| u64 found_start; | |
| /* | |
| * First iteration, @start matches @offset and it's | |
| * within the hole. | |
| */ | |
| if (start == offset) | |
| search_start = offset; | |
| found = find_desired_extent_in_hole(inode, whence, | |
| delalloc_cached_state, | |
| search_start, | |
| key.offset - 1, | |
| &found_start); | |
| if (found) { | |
| start = found_start; | |
| break; | |
| } | |
| /* | |
| * Didn't find data or a hole (due to delalloc) in the | |
| * implicit hole range, so need to analyze the extent. | |
| */ | |
| } | |
| extent = btrfs_item_ptr(leaf, path->slots[0], | |
| struct btrfs_file_extent_item); | |
| type = btrfs_file_extent_type(leaf, extent); | |
| /* | |
| * Can't access the extent's disk_bytenr field if this is an | |
| * inline extent, since at that offset, it's where the extent | |
| * data starts. | |
| */ | |
| if (type == BTRFS_FILE_EXTENT_PREALLOC || | |
| (type == BTRFS_FILE_EXTENT_REG && | |
| btrfs_file_extent_disk_bytenr(leaf, extent) == 0)) { | |
| /* | |
| * Explicit hole or prealloc extent, search for delalloc. | |
| * A prealloc extent is treated like a hole. | |
| */ | |
| u64 search_start = key.offset; | |
| u64 found_start; | |
| /* | |
| * First iteration, @start matches @offset and it's | |
| * within the hole. | |
| */ | |
| if (start == offset) | |
| search_start = offset; | |
| found = find_desired_extent_in_hole(inode, whence, | |
| delalloc_cached_state, | |
| search_start, | |
| extent_end - 1, | |
| &found_start); | |
| if (found) { | |
| start = found_start; | |
| break; | |
| } | |
| /* | |
| * Didn't find data or a hole (due to delalloc) in the | |
| * implicit hole range, so need to analyze the next | |
| * extent item. | |
| */ | |
| } else { | |
| /* | |
| * Found a regular or inline extent. | |
| * If we are seeking for data, adjust the start offset | |
| * and stop, we're done. | |
| */ | |
| if (whence == SEEK_DATA) { | |
| start = max_t(u64, key.offset, offset); | |
| found = true; | |
| break; | |
| } | |
| /* | |
| * Else, we are seeking for a hole, check the next file | |
| * extent item. | |
| */ | |
| } | |
| start = extent_end; | |
| last_extent_end = extent_end; | |
| path->slots[0]++; | |
| if (fatal_signal_pending(current)) { | |
| ret = -EINTR; | |
| goto out; | |
| } | |
| cond_resched(); | |
| } | |
| /* We have an implicit hole from the last extent found up to i_size. */ | |
| if (!found && start < i_size) { | |
| found = find_desired_extent_in_hole(inode, whence, | |
| delalloc_cached_state, start, | |
| i_size - 1, &start); | |
| if (!found) | |
| start = i_size; | |
| } | |
| out: | |
| btrfs_unlock_extent(&inode->io_tree, lockstart, lockend, &cached_state); | |
| btrfs_free_path(path); | |
| if (ret < 0) | |
| return ret; | |
| if (whence == SEEK_DATA && start >= i_size) | |
| return -ENXIO; | |
| return min_t(loff_t, start, i_size); | |
| } | |
| static loff_t btrfs_file_llseek(struct file *file, loff_t offset, int whence) | |
| { | |
| struct inode *inode = file->f_mapping->host; | |
| switch (whence) { | |
| default: | |
| return generic_file_llseek(file, offset, whence); | |
| case SEEK_DATA: | |
| case SEEK_HOLE: | |
| btrfs_inode_lock(BTRFS_I(inode), BTRFS_ILOCK_SHARED); | |
| offset = find_desired_extent(file, offset, whence); | |
| btrfs_inode_unlock(BTRFS_I(inode), BTRFS_ILOCK_SHARED); | |
| break; | |
| } | |
| if (offset < 0) | |
| return offset; | |
| return vfs_setpos(file, offset, inode->i_sb->s_maxbytes); | |
| } | |
| static int btrfs_file_open(struct inode *inode, struct file *filp) | |
| { | |
| int ret; | |
| if (btrfs_is_shutdown(inode_to_fs_info(inode))) | |
| return -EIO; | |
| filp->f_mode |= FMODE_NOWAIT | FMODE_CAN_ODIRECT; | |
| ret = fsverity_file_open(inode, filp); | |
| if (ret) | |
| return ret; | |
| return generic_file_open(inode, filp); | |
| } | |
| static ssize_t btrfs_file_read_iter(struct kiocb *iocb, struct iov_iter *to) | |
| { | |
| ssize_t ret = 0; | |
| if (btrfs_is_shutdown(inode_to_fs_info(file_inode(iocb->ki_filp)))) | |
| return -EIO; | |
| if (iocb->ki_flags & IOCB_DIRECT) { | |
| ret = btrfs_direct_read(iocb, to); | |
| if (ret < 0 || !iov_iter_count(to) || | |
| iocb->ki_pos >= i_size_read(file_inode(iocb->ki_filp))) | |
| return ret; | |
| } | |
| return filemap_read(iocb, to, ret); | |
| } | |
| static ssize_t btrfs_file_splice_read(struct file *in, loff_t *ppos, | |
| struct pipe_inode_info *pipe, | |
| size_t len, unsigned int flags) | |
| { | |
| if (btrfs_is_shutdown(inode_to_fs_info(file_inode(in)))) | |
| return -EIO; | |
| return filemap_splice_read(in, ppos, pipe, len, flags); | |
| } | |
| const struct file_operations btrfs_file_operations = { | |
| .llseek = btrfs_file_llseek, | |
| .read_iter = btrfs_file_read_iter, | |
| .splice_read = btrfs_file_splice_read, | |
| .write_iter = btrfs_file_write_iter, | |
| .splice_write = iter_file_splice_write, | |
| .mmap_prepare = btrfs_file_mmap_prepare, | |
| .open = btrfs_file_open, | |
| .release = btrfs_release_file, | |
| .get_unmapped_area = thp_get_unmapped_area, | |
| .fsync = btrfs_sync_file, | |
| .fallocate = btrfs_fallocate, | |
| .unlocked_ioctl = btrfs_ioctl, | |
| #ifdef CONFIG_COMPAT | |
| .compat_ioctl = btrfs_compat_ioctl, | |
| #endif | |
| .remap_file_range = btrfs_remap_file_range, | |
| .uring_cmd = btrfs_uring_cmd, | |
| .fop_flags = FOP_BUFFER_RASYNC | FOP_BUFFER_WASYNC, | |
| .setlease = generic_setlease, | |
| }; | |
| int btrfs_fdatawrite_range(struct btrfs_inode *inode, loff_t start, loff_t end) | |
| { | |
| struct address_space *mapping = inode->vfs_inode.i_mapping; | |
| int ret; | |
| /* | |
| * So with compression we will find and lock a dirty page and clear the | |
| * first one as dirty, setup an async extent, and immediately return | |
| * with the entire range locked but with nobody actually marked with | |
| * writeback. So we can't just filemap_write_and_wait_range() and | |
| * expect it to work since it will just kick off a thread to do the | |
| * actual work. So we need to call filemap_fdatawrite_range _again_ | |
| * since it will wait on the page lock, which won't be unlocked until | |
| * after the pages have been marked as writeback and so we're good to go | |
| * from there. We have to do this otherwise we'll miss the ordered | |
| * extents and that results in badness. Please Josef, do not think you | |
| * know better and pull this out at some point in the future, it is | |
| * right and you are wrong. | |
| */ | |
| ret = filemap_fdatawrite_range(mapping, start, end); | |
| if (!ret && test_bit(BTRFS_INODE_HAS_ASYNC_EXTENT, &inode->runtime_flags)) | |
| ret = filemap_fdatawrite_range(mapping, start, end); | |
| return ret; | |
| } |