| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * Virtio-mem device driver. | |
| * | |
| * Copyright Red Hat, Inc. 2020 | |
| * | |
| * Author(s): David Hildenbrand <david@redhat.com> | |
| */ | |
| #include <linux/virtio.h> | |
| #include <linux/virtio_mem.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #include <linux/mm.h> | |
| #include <linux/memory_hotplug.h> | |
| #include <linux/memory.h> | |
| #include <linux/hrtimer.h> | |
| #include <linux/crash_dump.h> | |
| #include <linux/mutex.h> | |
| #include <linux/bitmap.h> | |
| #include <linux/lockdep.h> | |
| #include <linux/log2.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/suspend.h> | |
| #include <acpi/acpi_numa.h> | |
| static bool unplug_online = true; | |
| module_param(unplug_online, bool, 0644); | |
| MODULE_PARM_DESC(unplug_online, "Try to unplug online memory"); | |
| static bool force_bbm; | |
| module_param(force_bbm, bool, 0444); | |
| MODULE_PARM_DESC(force_bbm, | |
| "Force Big Block Mode. Default is 0 (auto-selection)"); | |
| static unsigned long bbm_block_size; | |
| module_param(bbm_block_size, ulong, 0444); | |
| MODULE_PARM_DESC(bbm_block_size, | |
| "Big Block size in bytes. Default is 0 (auto-detection)."); | |
| /* | |
| * virtio-mem currently supports the following modes of operation: | |
| * | |
| * * Sub Block Mode (SBM): A Linux memory block spans 2..X subblocks (SB). The | |
| * size of a Sub Block (SB) is determined based on the device block size, the | |
| * pageblock size, and the maximum allocation granularity of the buddy. | |
| * Subblocks within a Linux memory block might either be plugged or unplugged. | |
| * Memory is added/removed to Linux MM in Linux memory block granularity. | |
| * | |
| * * Big Block Mode (BBM): A Big Block (BB) spans 1..X Linux memory blocks. | |
| * Memory is added/removed to Linux MM in Big Block granularity. | |
| * | |
| * The mode is determined automatically based on the Linux memory block size | |
| * and the device block size. | |
| * | |
| * User space / core MM (auto onlining) is responsible for onlining added | |
| * Linux memory blocks - and for selecting a zone. Linux Memory Blocks are | |
| * always onlined separately, and all memory within a Linux memory block is | |
| * onlined to the same zone - virtio-mem relies on this behavior. | |
| */ | |
| /* | |
| * State of a Linux memory block in SBM. | |
| */ | |
| enum virtio_mem_sbm_mb_state { | |
| /* Unplugged, not added to Linux. Can be reused later. */ | |
| VIRTIO_MEM_SBM_MB_UNUSED = 0, | |
| /* (Partially) plugged, not added to Linux. Error on add_memory(). */ | |
| VIRTIO_MEM_SBM_MB_PLUGGED, | |
| /* Fully plugged, fully added to Linux, offline. */ | |
| VIRTIO_MEM_SBM_MB_OFFLINE, | |
| /* Partially plugged, fully added to Linux, offline. */ | |
| VIRTIO_MEM_SBM_MB_OFFLINE_PARTIAL, | |
| /* Fully plugged, fully added to Linux, onlined to a kernel zone. */ | |
| VIRTIO_MEM_SBM_MB_KERNEL, | |
| /* Partially plugged, fully added to Linux, online to a kernel zone */ | |
| VIRTIO_MEM_SBM_MB_KERNEL_PARTIAL, | |
| /* Fully plugged, fully added to Linux, onlined to ZONE_MOVABLE. */ | |
| VIRTIO_MEM_SBM_MB_MOVABLE, | |
| /* Partially plugged, fully added to Linux, onlined to ZONE_MOVABLE. */ | |
| VIRTIO_MEM_SBM_MB_MOVABLE_PARTIAL, | |
| VIRTIO_MEM_SBM_MB_COUNT | |
| }; | |
| /* | |
| * State of a Big Block (BB) in BBM, covering 1..X Linux memory blocks. | |
| */ | |
| enum virtio_mem_bbm_bb_state { | |
| /* Unplugged, not added to Linux. Can be reused later. */ | |
| VIRTIO_MEM_BBM_BB_UNUSED = 0, | |
| /* Plugged, not added to Linux. Error on add_memory(). */ | |
| VIRTIO_MEM_BBM_BB_PLUGGED, | |
| /* Plugged and added to Linux. */ | |
| VIRTIO_MEM_BBM_BB_ADDED, | |
| /* All online parts are fake-offline, ready to remove. */ | |
| VIRTIO_MEM_BBM_BB_FAKE_OFFLINE, | |
| VIRTIO_MEM_BBM_BB_COUNT | |
| }; | |
| struct virtio_mem { | |
| struct virtio_device *vdev; | |
| /* We might first have to unplug all memory when starting up. */ | |
| bool unplug_all_required; | |
| /* Workqueue that processes the plug/unplug requests. */ | |
| struct work_struct wq; | |
| atomic_t wq_active; | |
| atomic_t config_changed; | |
| /* Virtqueue for guest->host requests. */ | |
| struct virtqueue *vq; | |
| /* Wait for a host response to a guest request. */ | |
| wait_queue_head_t host_resp; | |
| /* Space for one guest request and the host response. */ | |
| struct virtio_mem_req req; | |
| struct virtio_mem_resp resp; | |
| /* The current size of the device. */ | |
| uint64_t plugged_size; | |
| /* The requested size of the device. */ | |
| uint64_t requested_size; | |
| /* The device block size (for communicating with the device). */ | |
| uint64_t device_block_size; | |
| /* The determined node id for all memory of the device. */ | |
| int nid; | |
| /* Physical start address of the memory region. */ | |
| uint64_t addr; | |
| /* Maximum region size in bytes. */ | |
| uint64_t region_size; | |
| /* Usable region size in bytes. */ | |
| uint64_t usable_region_size; | |
| /* The parent resource for all memory added via this device. */ | |
| struct resource *parent_resource; | |
| /* | |
| * Copy of "System RAM (virtio_mem)" to be used for | |
| * add_memory_driver_managed(). | |
| */ | |
| const char *resource_name; | |
| /* Memory group identification. */ | |
| int mgid; | |
| /* | |
| * We don't want to add too much memory if it's not getting onlined, | |
| * to avoid running OOM. Besides this threshold, we allow to have at | |
| * least two offline blocks at a time (whatever is bigger). | |
| */ | |
| #define VIRTIO_MEM_DEFAULT_OFFLINE_THRESHOLD (1024 * 1024 * 1024) | |
| atomic64_t offline_size; | |
| uint64_t offline_threshold; | |
| /* If set, the driver is in SBM, otherwise in BBM. */ | |
| bool in_sbm; | |
| union { | |
| struct { | |
| /* Id of the first memory block of this device. */ | |
| unsigned long first_mb_id; | |
| /* Id of the last usable memory block of this device. */ | |
| unsigned long last_usable_mb_id; | |
| /* Id of the next memory bock to prepare when needed. */ | |
| unsigned long next_mb_id; | |
| /* The subblock size. */ | |
| uint64_t sb_size; | |
| /* The number of subblocks per Linux memory block. */ | |
| uint32_t sbs_per_mb; | |
| /* | |
| * Some of the Linux memory blocks tracked as "partially | |
| * plugged" are completely unplugged and can be offlined | |
| * and removed -- which previously failed. | |
| */ | |
| bool have_unplugged_mb; | |
| /* Summary of all memory block states. */ | |
| unsigned long mb_count[VIRTIO_MEM_SBM_MB_COUNT]; | |
| /* | |
| * One byte state per memory block. Allocated via | |
| * vmalloc(). Resized (alloc+copy+free) on demand. | |
| * | |
| * With 128 MiB memory blocks, we have states for 512 | |
| * GiB of memory in one 4 KiB page. | |
| */ | |
| uint8_t *mb_states; | |
| /* | |
| * Bitmap: one bit per subblock. Allocated similar to | |
| * sbm.mb_states. | |
| * | |
| * A set bit means the corresponding subblock is | |
| * plugged, otherwise it's unblocked. | |
| * | |
| * With 4 MiB subblocks, we manage 128 GiB of memory | |
| * in one 4 KiB page. | |
| */ | |
| unsigned long *sb_states; | |
| } sbm; | |
| struct { | |
| /* Id of the first big block of this device. */ | |
| unsigned long first_bb_id; | |
| /* Id of the last usable big block of this device. */ | |
| unsigned long last_usable_bb_id; | |
| /* Id of the next device bock to prepare when needed. */ | |
| unsigned long next_bb_id; | |
| /* Summary of all big block states. */ | |
| unsigned long bb_count[VIRTIO_MEM_BBM_BB_COUNT]; | |
| /* One byte state per big block. See sbm.mb_states. */ | |
| uint8_t *bb_states; | |
| /* The block size used for plugging/adding/removing. */ | |
| uint64_t bb_size; | |
| } bbm; | |
| }; | |
| /* | |
| * Mutex that protects the sbm.mb_count, sbm.mb_states, | |
| * sbm.sb_states, bbm.bb_count, and bbm.bb_states | |
| * | |
| * When this lock is held the pointers can't change, ONLINE and | |
| * OFFLINE blocks can't change the state and no subblocks will get | |
| * plugged/unplugged. | |
| * | |
| * In kdump mode, used to serialize requests, last_block_addr and | |
| * last_block_plugged. | |
| */ | |
| struct mutex hotplug_mutex; | |
| bool hotplug_active; | |
| /* An error occurred we cannot handle - stop processing requests. */ | |
| bool broken; | |
| /* Cached valued of is_kdump_kernel() when the device was probed. */ | |
| bool in_kdump; | |
| /* The driver is being removed. */ | |
| spinlock_t removal_lock; | |
| bool removing; | |
| /* Timer for retrying to plug/unplug memory. */ | |
| struct hrtimer retry_timer; | |
| unsigned int retry_timer_ms; | |
| #define VIRTIO_MEM_RETRY_TIMER_MIN_MS 50000 | |
| #define VIRTIO_MEM_RETRY_TIMER_MAX_MS 300000 | |
| /* Memory notifier (online/offline events). */ | |
| struct notifier_block memory_notifier; | |
| /* Notifier to block hibernation image storing/reloading. */ | |
| struct notifier_block pm_notifier; | |
| #ifdef CONFIG_PROC_VMCORE | |
| /* vmcore callback for /proc/vmcore handling in kdump mode */ | |
| struct vmcore_cb vmcore_cb; | |
| uint64_t last_block_addr; | |
| bool last_block_plugged; | |
| #endif /* CONFIG_PROC_VMCORE */ | |
| /* Next device in the list of virtio-mem devices. */ | |
| struct list_head next; | |
| }; | |
| /* | |
| * We have to share a single online_page callback among all virtio-mem | |
| * devices. We use RCU to iterate the list in the callback. | |
| */ | |
| static DEFINE_MUTEX(virtio_mem_mutex); | |
| static LIST_HEAD(virtio_mem_devices); | |
| static void virtio_mem_online_page_cb(struct page *page, unsigned int order); | |
| static void virtio_mem_fake_offline_going_offline(unsigned long pfn, | |
| unsigned long nr_pages); | |
| static void virtio_mem_fake_offline_cancel_offline(unsigned long pfn, | |
| unsigned long nr_pages); | |
| static void virtio_mem_retry(struct virtio_mem *vm); | |
| static int virtio_mem_create_resource(struct virtio_mem *vm); | |
| static void virtio_mem_delete_resource(struct virtio_mem *vm); | |
| /* | |
| * Register a virtio-mem device so it will be considered for the online_page | |
| * callback. | |
| */ | |
| static int register_virtio_mem_device(struct virtio_mem *vm) | |
| { | |
| int rc = 0; | |
| /* First device registers the callback. */ | |
| mutex_lock(&virtio_mem_mutex); | |
| if (list_empty(&virtio_mem_devices)) | |
| rc = set_online_page_callback(&virtio_mem_online_page_cb); | |
| if (!rc) | |
| list_add_rcu(&vm->next, &virtio_mem_devices); | |
| mutex_unlock(&virtio_mem_mutex); | |
| return rc; | |
| } | |
| /* | |
| * Unregister a virtio-mem device so it will no longer be considered for the | |
| * online_page callback. | |
| */ | |
| static void unregister_virtio_mem_device(struct virtio_mem *vm) | |
| { | |
| /* Last device unregisters the callback. */ | |
| mutex_lock(&virtio_mem_mutex); | |
| list_del_rcu(&vm->next); | |
| if (list_empty(&virtio_mem_devices)) | |
| restore_online_page_callback(&virtio_mem_online_page_cb); | |
| mutex_unlock(&virtio_mem_mutex); | |
| synchronize_rcu(); | |
| } | |
| /* | |
| * Calculate the memory block id of a given address. | |
| */ | |
| static unsigned long virtio_mem_phys_to_mb_id(unsigned long addr) | |
| { | |
| return addr / memory_block_size_bytes(); | |
| } | |
| /* | |
| * Calculate the physical start address of a given memory block id. | |
| */ | |
| static unsigned long virtio_mem_mb_id_to_phys(unsigned long mb_id) | |
| { | |
| return mb_id * memory_block_size_bytes(); | |
| } | |
| /* | |
| * Calculate the big block id of a given address. | |
| */ | |
| static unsigned long virtio_mem_phys_to_bb_id(struct virtio_mem *vm, | |
| uint64_t addr) | |
| { | |
| return addr / vm->bbm.bb_size; | |
| } | |
| /* | |
| * Calculate the physical start address of a given big block id. | |
| */ | |
| static uint64_t virtio_mem_bb_id_to_phys(struct virtio_mem *vm, | |
| unsigned long bb_id) | |
| { | |
| return bb_id * vm->bbm.bb_size; | |
| } | |
| /* | |
| * Calculate the subblock id of a given address. | |
| */ | |
| static unsigned long virtio_mem_phys_to_sb_id(struct virtio_mem *vm, | |
| unsigned long addr) | |
| { | |
| const unsigned long mb_id = virtio_mem_phys_to_mb_id(addr); | |
| const unsigned long mb_addr = virtio_mem_mb_id_to_phys(mb_id); | |
| return (addr - mb_addr) / vm->sbm.sb_size; | |
| } | |
| /* | |
| * Set the state of a big block, taking care of the state counter. | |
| */ | |
| static void virtio_mem_bbm_set_bb_state(struct virtio_mem *vm, | |
| unsigned long bb_id, | |
| enum virtio_mem_bbm_bb_state state) | |
| { | |
| const unsigned long idx = bb_id - vm->bbm.first_bb_id; | |
| enum virtio_mem_bbm_bb_state old_state; | |
| old_state = vm->bbm.bb_states[idx]; | |
| vm->bbm.bb_states[idx] = state; | |
| BUG_ON(vm->bbm.bb_count[old_state] == 0); | |
| vm->bbm.bb_count[old_state]--; | |
| vm->bbm.bb_count[state]++; | |
| } | |
| /* | |
| * Get the state of a big block. | |
| */ | |
| static enum virtio_mem_bbm_bb_state virtio_mem_bbm_get_bb_state(struct virtio_mem *vm, | |
| unsigned long bb_id) | |
| { | |
| return vm->bbm.bb_states[bb_id - vm->bbm.first_bb_id]; | |
| } | |
| /* | |
| * Prepare the big block state array for the next big block. | |
| */ | |
| static int virtio_mem_bbm_bb_states_prepare_next_bb(struct virtio_mem *vm) | |
| { | |
| unsigned long old_bytes = vm->bbm.next_bb_id - vm->bbm.first_bb_id; | |
| unsigned long new_bytes = old_bytes + 1; | |
| int old_pages = PFN_UP(old_bytes); | |
| int new_pages = PFN_UP(new_bytes); | |
| uint8_t *new_array; | |
| if (vm->bbm.bb_states && old_pages == new_pages) | |
| return 0; | |
| new_array = vzalloc(new_pages * PAGE_SIZE); | |
| if (!new_array) | |
| return -ENOMEM; | |
| mutex_lock(&vm->hotplug_mutex); | |
| if (vm->bbm.bb_states) | |
| memcpy(new_array, vm->bbm.bb_states, old_pages * PAGE_SIZE); | |
| vfree(vm->bbm.bb_states); | |
| vm->bbm.bb_states = new_array; | |
| mutex_unlock(&vm->hotplug_mutex); | |
| return 0; | |
| } | |
| #define virtio_mem_bbm_for_each_bb(_vm, _bb_id, _state) \ | |
| for (_bb_id = (_vm)->bbm.first_bb_id; \ | |
| _bb_id < (_vm)->bbm.next_bb_id && (_vm)->bbm.bb_count[_state]; \ | |
| _bb_id++) \ | |
| if (virtio_mem_bbm_get_bb_state(_vm, _bb_id) == _state) | |
| #define virtio_mem_bbm_for_each_bb_rev(_vm, _bb_id, _state) \ | |
| for (_bb_id = (_vm)->bbm.next_bb_id - 1; \ | |
| _bb_id >= (_vm)->bbm.first_bb_id && (_vm)->bbm.bb_count[_state]; \ | |
| _bb_id--) \ | |
| if (virtio_mem_bbm_get_bb_state(_vm, _bb_id) == _state) | |
| /* | |
| * Set the state of a memory block, taking care of the state counter. | |
| */ | |
| static void virtio_mem_sbm_set_mb_state(struct virtio_mem *vm, | |
| unsigned long mb_id, uint8_t state) | |
| { | |
| const unsigned long idx = mb_id - vm->sbm.first_mb_id; | |
| uint8_t old_state; | |
| old_state = vm->sbm.mb_states[idx]; | |
| vm->sbm.mb_states[idx] = state; | |
| BUG_ON(vm->sbm.mb_count[old_state] == 0); | |
| vm->sbm.mb_count[old_state]--; | |
| vm->sbm.mb_count[state]++; | |
| } | |
| /* | |
| * Get the state of a memory block. | |
| */ | |
| static uint8_t virtio_mem_sbm_get_mb_state(struct virtio_mem *vm, | |
| unsigned long mb_id) | |
| { | |
| const unsigned long idx = mb_id - vm->sbm.first_mb_id; | |
| return vm->sbm.mb_states[idx]; | |
| } | |
| /* | |
| * Prepare the state array for the next memory block. | |
| */ | |
| static int virtio_mem_sbm_mb_states_prepare_next_mb(struct virtio_mem *vm) | |
| { | |
| int old_pages = PFN_UP(vm->sbm.next_mb_id - vm->sbm.first_mb_id); | |
| int new_pages = PFN_UP(vm->sbm.next_mb_id - vm->sbm.first_mb_id + 1); | |
| uint8_t *new_array; | |
| if (vm->sbm.mb_states && old_pages == new_pages) | |
| return 0; | |
| new_array = vzalloc(new_pages * PAGE_SIZE); | |
| if (!new_array) | |
| return -ENOMEM; | |
| mutex_lock(&vm->hotplug_mutex); | |
| if (vm->sbm.mb_states) | |
| memcpy(new_array, vm->sbm.mb_states, old_pages * PAGE_SIZE); | |
| vfree(vm->sbm.mb_states); | |
| vm->sbm.mb_states = new_array; | |
| mutex_unlock(&vm->hotplug_mutex); | |
| return 0; | |
| } | |
| #define virtio_mem_sbm_for_each_mb(_vm, _mb_id, _state) \ | |
| for (_mb_id = _vm->sbm.first_mb_id; \ | |
| _mb_id < _vm->sbm.next_mb_id && _vm->sbm.mb_count[_state]; \ | |
| _mb_id++) \ | |
| if (virtio_mem_sbm_get_mb_state(_vm, _mb_id) == _state) | |
| #define virtio_mem_sbm_for_each_mb_rev(_vm, _mb_id, _state) \ | |
| for (_mb_id = _vm->sbm.next_mb_id - 1; \ | |
| _mb_id >= _vm->sbm.first_mb_id && _vm->sbm.mb_count[_state]; \ | |
| _mb_id--) \ | |
| if (virtio_mem_sbm_get_mb_state(_vm, _mb_id) == _state) | |
| /* | |
| * Calculate the bit number in the subblock bitmap for the given subblock | |
| * inside the given memory block. | |
| */ | |
| static int virtio_mem_sbm_sb_state_bit_nr(struct virtio_mem *vm, | |
| unsigned long mb_id, int sb_id) | |
| { | |
| return (mb_id - vm->sbm.first_mb_id) * vm->sbm.sbs_per_mb + sb_id; | |
| } | |
| /* | |
| * Mark all selected subblocks plugged. | |
| * | |
| * Will not modify the state of the memory block. | |
| */ | |
| static void virtio_mem_sbm_set_sb_plugged(struct virtio_mem *vm, | |
| unsigned long mb_id, int sb_id, | |
| int count) | |
| { | |
| const int bit = virtio_mem_sbm_sb_state_bit_nr(vm, mb_id, sb_id); | |
| __bitmap_set(vm->sbm.sb_states, bit, count); | |
| } | |
| /* | |
| * Mark all selected subblocks unplugged. | |
| * | |
| * Will not modify the state of the memory block. | |
| */ | |
| static void virtio_mem_sbm_set_sb_unplugged(struct virtio_mem *vm, | |
| unsigned long mb_id, int sb_id, | |
| int count) | |
| { | |
| const int bit = virtio_mem_sbm_sb_state_bit_nr(vm, mb_id, sb_id); | |
| __bitmap_clear(vm->sbm.sb_states, bit, count); | |
| } | |
| /* | |
| * Test if all selected subblocks are plugged. | |
| */ | |
| static bool virtio_mem_sbm_test_sb_plugged(struct virtio_mem *vm, | |
| unsigned long mb_id, int sb_id, | |
| int count) | |
| { | |
| const int bit = virtio_mem_sbm_sb_state_bit_nr(vm, mb_id, sb_id); | |
| if (count == 1) | |
| return test_bit(bit, vm->sbm.sb_states); | |
| /* TODO: Helper similar to bitmap_set() */ | |
| return find_next_zero_bit(vm->sbm.sb_states, bit + count, bit) >= | |
| bit + count; | |
| } | |
| /* | |
| * Test if all selected subblocks are unplugged. | |
| */ | |
| static bool virtio_mem_sbm_test_sb_unplugged(struct virtio_mem *vm, | |
| unsigned long mb_id, int sb_id, | |
| int count) | |
| { | |
| const int bit = virtio_mem_sbm_sb_state_bit_nr(vm, mb_id, sb_id); | |
| /* TODO: Helper similar to bitmap_set() */ | |
| return find_next_bit(vm->sbm.sb_states, bit + count, bit) >= | |
| bit + count; | |
| } | |
| /* | |
| * Find the first unplugged subblock. Returns vm->sbm.sbs_per_mb in case there is | |
| * none. | |
| */ | |
| static int virtio_mem_sbm_first_unplugged_sb(struct virtio_mem *vm, | |
| unsigned long mb_id) | |
| { | |
| const int bit = virtio_mem_sbm_sb_state_bit_nr(vm, mb_id, 0); | |
| return find_next_zero_bit(vm->sbm.sb_states, | |
| bit + vm->sbm.sbs_per_mb, bit) - bit; | |
| } | |
| /* | |
| * Prepare the subblock bitmap for the next memory block. | |
| */ | |
| static int virtio_mem_sbm_sb_states_prepare_next_mb(struct virtio_mem *vm) | |
| { | |
| const unsigned long old_nb_mb = vm->sbm.next_mb_id - vm->sbm.first_mb_id; | |
| const unsigned long old_nb_bits = old_nb_mb * vm->sbm.sbs_per_mb; | |
| const unsigned long new_nb_bits = (old_nb_mb + 1) * vm->sbm.sbs_per_mb; | |
| int old_pages = PFN_UP(BITS_TO_LONGS(old_nb_bits) * sizeof(long)); | |
| int new_pages = PFN_UP(BITS_TO_LONGS(new_nb_bits) * sizeof(long)); | |
| unsigned long *new_bitmap, *old_bitmap; | |
| if (vm->sbm.sb_states && old_pages == new_pages) | |
| return 0; | |
| new_bitmap = vzalloc(new_pages * PAGE_SIZE); | |
| if (!new_bitmap) | |
| return -ENOMEM; | |
| mutex_lock(&vm->hotplug_mutex); | |
| if (vm->sbm.sb_states) | |
| memcpy(new_bitmap, vm->sbm.sb_states, old_pages * PAGE_SIZE); | |
| old_bitmap = vm->sbm.sb_states; | |
| vm->sbm.sb_states = new_bitmap; | |
| mutex_unlock(&vm->hotplug_mutex); | |
| vfree(old_bitmap); | |
| return 0; | |
| } | |
| /* | |
| * Test if we could add memory without creating too much offline memory - | |
| * to avoid running OOM if memory is getting onlined deferred. | |
| */ | |
| static bool virtio_mem_could_add_memory(struct virtio_mem *vm, uint64_t size) | |
| { | |
| if (WARN_ON_ONCE(size > vm->offline_threshold)) | |
| return false; | |
| return atomic64_read(&vm->offline_size) + size <= vm->offline_threshold; | |
| } | |
| /* | |
| * Try adding memory to Linux. Will usually only fail if out of memory. | |
| * | |
| * Must not be called with the vm->hotplug_mutex held (possible deadlock with | |
| * onlining code). | |
| * | |
| * Will not modify the state of memory blocks in virtio-mem. | |
| */ | |
| static int virtio_mem_add_memory(struct virtio_mem *vm, uint64_t addr, | |
| uint64_t size) | |
| { | |
| int rc; | |
| /* | |
| * When force-unloading the driver and we still have memory added to | |
| * Linux, the resource name has to stay. | |
| */ | |
| if (!vm->resource_name) { | |
| vm->resource_name = kstrdup_const("System RAM (virtio_mem)", | |
| GFP_KERNEL); | |
| if (!vm->resource_name) | |
| return -ENOMEM; | |
| } | |
| dev_dbg(&vm->vdev->dev, "adding memory: 0x%llx - 0x%llx\n", addr, | |
| addr + size - 1); | |
| /* Memory might get onlined immediately. */ | |
| atomic64_add(size, &vm->offline_size); | |
| rc = add_memory_driver_managed(vm->mgid, addr, size, vm->resource_name, | |
| MHP_MERGE_RESOURCE | MHP_NID_IS_MGID); | |
| if (rc) { | |
| atomic64_sub(size, &vm->offline_size); | |
| dev_warn(&vm->vdev->dev, "adding memory failed: %d\n", rc); | |
| /* | |
| * TODO: Linux MM does not properly clean up yet in all cases | |
| * where adding of memory failed - especially on -ENOMEM. | |
| */ | |
| } | |
| return rc; | |
| } | |
| /* | |
| * See virtio_mem_add_memory(): Try adding a single Linux memory block. | |
| */ | |
| static int virtio_mem_sbm_add_mb(struct virtio_mem *vm, unsigned long mb_id) | |
| { | |
| const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id); | |
| const uint64_t size = memory_block_size_bytes(); | |
| return virtio_mem_add_memory(vm, addr, size); | |
| } | |
| /* | |
| * See virtio_mem_add_memory(): Try adding a big block. | |
| */ | |
| static int virtio_mem_bbm_add_bb(struct virtio_mem *vm, unsigned long bb_id) | |
| { | |
| const uint64_t addr = virtio_mem_bb_id_to_phys(vm, bb_id); | |
| const uint64_t size = vm->bbm.bb_size; | |
| return virtio_mem_add_memory(vm, addr, size); | |
| } | |
| /* | |
| * Try removing memory from Linux. Will only fail if memory blocks aren't | |
| * offline. | |
| * | |
| * Must not be called with the vm->hotplug_mutex held (possible deadlock with | |
| * onlining code). | |
| * | |
| * Will not modify the state of memory blocks in virtio-mem. | |
| */ | |
| static int virtio_mem_remove_memory(struct virtio_mem *vm, uint64_t addr, | |
| uint64_t size) | |
| { | |
| int rc; | |
| dev_dbg(&vm->vdev->dev, "removing memory: 0x%llx - 0x%llx\n", addr, | |
| addr + size - 1); | |
| rc = remove_memory(addr, size); | |
| if (!rc) { | |
| atomic64_sub(size, &vm->offline_size); | |
| /* | |
| * We might have freed up memory we can now unplug, retry | |
| * immediately instead of waiting. | |
| */ | |
| virtio_mem_retry(vm); | |
| } else { | |
| dev_dbg(&vm->vdev->dev, "removing memory failed: %d\n", rc); | |
| } | |
| return rc; | |
| } | |
| /* | |
| * See virtio_mem_remove_memory(): Try removing a single Linux memory block. | |
| */ | |
| static int virtio_mem_sbm_remove_mb(struct virtio_mem *vm, unsigned long mb_id) | |
| { | |
| const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id); | |
| const uint64_t size = memory_block_size_bytes(); | |
| return virtio_mem_remove_memory(vm, addr, size); | |
| } | |
| /* | |
| * Try offlining and removing memory from Linux. | |
| * | |
| * Must not be called with the vm->hotplug_mutex held (possible deadlock with | |
| * onlining code). | |
| * | |
| * Will not modify the state of memory blocks in virtio-mem. | |
| */ | |
| static int virtio_mem_offline_and_remove_memory(struct virtio_mem *vm, | |
| uint64_t addr, | |
| uint64_t size) | |
| { | |
| int rc; | |
| dev_dbg(&vm->vdev->dev, | |
| "offlining and removing memory: 0x%llx - 0x%llx\n", addr, | |
| addr + size - 1); | |
| rc = offline_and_remove_memory(addr, size); | |
| if (!rc) { | |
| atomic64_sub(size, &vm->offline_size); | |
| /* | |
| * We might have freed up memory we can now unplug, retry | |
| * immediately instead of waiting. | |
| */ | |
| virtio_mem_retry(vm); | |
| return 0; | |
| } | |
| dev_dbg(&vm->vdev->dev, "offlining and removing memory failed: %d\n", rc); | |
| /* | |
| * We don't really expect this to fail, because we fake-offlined all | |
| * memory already. But it could fail in corner cases. | |
| */ | |
| WARN_ON_ONCE(rc != -ENOMEM && rc != -EBUSY); | |
| return rc == -ENOMEM ? -ENOMEM : -EBUSY; | |
| } | |
| /* | |
| * See virtio_mem_offline_and_remove_memory(): Try offlining and removing | |
| * a single Linux memory block. | |
| */ | |
| static int virtio_mem_sbm_offline_and_remove_mb(struct virtio_mem *vm, | |
| unsigned long mb_id) | |
| { | |
| const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id); | |
| const uint64_t size = memory_block_size_bytes(); | |
| return virtio_mem_offline_and_remove_memory(vm, addr, size); | |
| } | |
| /* | |
| * Try (offlining and) removing memory from Linux in case all subblocks are | |
| * unplugged. Can be called on online and offline memory blocks. | |
| * | |
| * May modify the state of memory blocks in virtio-mem. | |
| */ | |
| static int virtio_mem_sbm_try_remove_unplugged_mb(struct virtio_mem *vm, | |
| unsigned long mb_id) | |
| { | |
| int rc; | |
| /* | |
| * Once all subblocks of a memory block were unplugged, offline and | |
| * remove it. | |
| */ | |
| if (!virtio_mem_sbm_test_sb_unplugged(vm, mb_id, 0, vm->sbm.sbs_per_mb)) | |
| return 0; | |
| /* offline_and_remove_memory() works for online and offline memory. */ | |
| mutex_unlock(&vm->hotplug_mutex); | |
| rc = virtio_mem_sbm_offline_and_remove_mb(vm, mb_id); | |
| mutex_lock(&vm->hotplug_mutex); | |
| if (!rc) | |
| virtio_mem_sbm_set_mb_state(vm, mb_id, | |
| VIRTIO_MEM_SBM_MB_UNUSED); | |
| return rc; | |
| } | |
| /* | |
| * See virtio_mem_offline_and_remove_memory(): Try to offline and remove a | |
| * all Linux memory blocks covered by the big block. | |
| */ | |
| static int virtio_mem_bbm_offline_and_remove_bb(struct virtio_mem *vm, | |
| unsigned long bb_id) | |
| { | |
| const uint64_t addr = virtio_mem_bb_id_to_phys(vm, bb_id); | |
| const uint64_t size = vm->bbm.bb_size; | |
| return virtio_mem_offline_and_remove_memory(vm, addr, size); | |
| } | |
| /* | |
| * Trigger the workqueue so the device can perform its magic. | |
| */ | |
| static void virtio_mem_retry(struct virtio_mem *vm) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&vm->removal_lock, flags); | |
| if (!vm->removing) | |
| queue_work(system_freezable_wq, &vm->wq); | |
| spin_unlock_irqrestore(&vm->removal_lock, flags); | |
| } | |
| static int virtio_mem_translate_node_id(struct virtio_mem *vm, uint16_t node_id) | |
| { | |
| int node = NUMA_NO_NODE; | |
| #if defined(CONFIG_ACPI_NUMA) | |
| if (virtio_has_feature(vm->vdev, VIRTIO_MEM_F_ACPI_PXM)) | |
| node = pxm_to_node(node_id); | |
| #endif | |
| return node; | |
| } | |
| /* | |
| * Test if a virtio-mem device overlaps with the given range. Can be called | |
| * from (notifier) callbacks lockless. | |
| */ | |
| static bool virtio_mem_overlaps_range(struct virtio_mem *vm, uint64_t start, | |
| uint64_t size) | |
| { | |
| return start < vm->addr + vm->region_size && vm->addr < start + size; | |
| } | |
| /* | |
| * Test if a virtio-mem device contains a given range. Can be called from | |
| * (notifier) callbacks lockless. | |
| */ | |
| static bool virtio_mem_contains_range(struct virtio_mem *vm, uint64_t start, | |
| uint64_t size) | |
| { | |
| return start >= vm->addr && start + size <= vm->addr + vm->region_size; | |
| } | |
| static int virtio_mem_sbm_notify_going_online(struct virtio_mem *vm, | |
| unsigned long mb_id) | |
| { | |
| switch (virtio_mem_sbm_get_mb_state(vm, mb_id)) { | |
| case VIRTIO_MEM_SBM_MB_OFFLINE_PARTIAL: | |
| case VIRTIO_MEM_SBM_MB_OFFLINE: | |
| return NOTIFY_OK; | |
| default: | |
| break; | |
| } | |
| dev_warn_ratelimited(&vm->vdev->dev, | |
| "memory block onlining denied\n"); | |
| return NOTIFY_BAD; | |
| } | |
| static void virtio_mem_sbm_notify_offline(struct virtio_mem *vm, | |
| unsigned long mb_id) | |
| { | |
| switch (virtio_mem_sbm_get_mb_state(vm, mb_id)) { | |
| case VIRTIO_MEM_SBM_MB_KERNEL_PARTIAL: | |
| case VIRTIO_MEM_SBM_MB_MOVABLE_PARTIAL: | |
| virtio_mem_sbm_set_mb_state(vm, mb_id, | |
| VIRTIO_MEM_SBM_MB_OFFLINE_PARTIAL); | |
| break; | |
| case VIRTIO_MEM_SBM_MB_KERNEL: | |
| case VIRTIO_MEM_SBM_MB_MOVABLE: | |
| virtio_mem_sbm_set_mb_state(vm, mb_id, | |
| VIRTIO_MEM_SBM_MB_OFFLINE); | |
| break; | |
| default: | |
| BUG(); | |
| break; | |
| } | |
| } | |
| static void virtio_mem_sbm_notify_online(struct virtio_mem *vm, | |
| unsigned long mb_id, | |
| unsigned long start_pfn) | |
| { | |
| const bool is_movable = is_zone_movable_page(pfn_to_page(start_pfn)); | |
| int new_state; | |
| switch (virtio_mem_sbm_get_mb_state(vm, mb_id)) { | |
| case VIRTIO_MEM_SBM_MB_OFFLINE_PARTIAL: | |
| new_state = VIRTIO_MEM_SBM_MB_KERNEL_PARTIAL; | |
| if (is_movable) | |
| new_state = VIRTIO_MEM_SBM_MB_MOVABLE_PARTIAL; | |
| break; | |
| case VIRTIO_MEM_SBM_MB_OFFLINE: | |
| new_state = VIRTIO_MEM_SBM_MB_KERNEL; | |
| if (is_movable) | |
| new_state = VIRTIO_MEM_SBM_MB_MOVABLE; | |
| break; | |
| default: | |
| BUG(); | |
| break; | |
| } | |
| virtio_mem_sbm_set_mb_state(vm, mb_id, new_state); | |
| } | |
| static void virtio_mem_sbm_notify_going_offline(struct virtio_mem *vm, | |
| unsigned long mb_id) | |
| { | |
| const unsigned long nr_pages = PFN_DOWN(vm->sbm.sb_size); | |
| unsigned long pfn; | |
| int sb_id; | |
| for (sb_id = 0; sb_id < vm->sbm.sbs_per_mb; sb_id++) { | |
| if (virtio_mem_sbm_test_sb_plugged(vm, mb_id, sb_id, 1)) | |
| continue; | |
| pfn = PFN_DOWN(virtio_mem_mb_id_to_phys(mb_id) + | |
| sb_id * vm->sbm.sb_size); | |
| virtio_mem_fake_offline_going_offline(pfn, nr_pages); | |
| } | |
| } | |
| static void virtio_mem_sbm_notify_cancel_offline(struct virtio_mem *vm, | |
| unsigned long mb_id) | |
| { | |
| const unsigned long nr_pages = PFN_DOWN(vm->sbm.sb_size); | |
| unsigned long pfn; | |
| int sb_id; | |
| for (sb_id = 0; sb_id < vm->sbm.sbs_per_mb; sb_id++) { | |
| if (virtio_mem_sbm_test_sb_plugged(vm, mb_id, sb_id, 1)) | |
| continue; | |
| pfn = PFN_DOWN(virtio_mem_mb_id_to_phys(mb_id) + | |
| sb_id * vm->sbm.sb_size); | |
| virtio_mem_fake_offline_cancel_offline(pfn, nr_pages); | |
| } | |
| } | |
| static void virtio_mem_bbm_notify_going_offline(struct virtio_mem *vm, | |
| unsigned long bb_id, | |
| unsigned long pfn, | |
| unsigned long nr_pages) | |
| { | |
| /* | |
| * When marked as "fake-offline", all online memory of this device block | |
| * is allocated by us. Otherwise, we don't have any memory allocated. | |
| */ | |
| if (virtio_mem_bbm_get_bb_state(vm, bb_id) != | |
| VIRTIO_MEM_BBM_BB_FAKE_OFFLINE) | |
| return; | |
| virtio_mem_fake_offline_going_offline(pfn, nr_pages); | |
| } | |
| static void virtio_mem_bbm_notify_cancel_offline(struct virtio_mem *vm, | |
| unsigned long bb_id, | |
| unsigned long pfn, | |
| unsigned long nr_pages) | |
| { | |
| if (virtio_mem_bbm_get_bb_state(vm, bb_id) != | |
| VIRTIO_MEM_BBM_BB_FAKE_OFFLINE) | |
| return; | |
| virtio_mem_fake_offline_cancel_offline(pfn, nr_pages); | |
| } | |
| /* | |
| * This callback will either be called synchronously from add_memory() or | |
| * asynchronously (e.g., triggered via user space). We have to be careful | |
| * with locking when calling add_memory(). | |
| */ | |
| static int virtio_mem_memory_notifier_cb(struct notifier_block *nb, | |
| unsigned long action, void *arg) | |
| { | |
| struct virtio_mem *vm = container_of(nb, struct virtio_mem, | |
| memory_notifier); | |
| struct memory_notify *mhp = arg; | |
| const unsigned long start = PFN_PHYS(mhp->start_pfn); | |
| const unsigned long size = PFN_PHYS(mhp->nr_pages); | |
| int rc = NOTIFY_OK; | |
| unsigned long id; | |
| if (!virtio_mem_overlaps_range(vm, start, size)) | |
| return NOTIFY_DONE; | |
| if (vm->in_sbm) { | |
| id = virtio_mem_phys_to_mb_id(start); | |
| /* | |
| * In SBM, we add memory in separate memory blocks - we expect | |
| * it to be onlined/offlined in the same granularity. Bail out | |
| * if this ever changes. | |
| */ | |
| if (WARN_ON_ONCE(size != memory_block_size_bytes() || | |
| !IS_ALIGNED(start, memory_block_size_bytes()))) | |
| return NOTIFY_BAD; | |
| } else { | |
| id = virtio_mem_phys_to_bb_id(vm, start); | |
| /* | |
| * In BBM, we only care about onlining/offlining happening | |
| * within a single big block, we don't care about the | |
| * actual granularity as we don't track individual Linux | |
| * memory blocks. | |
| */ | |
| if (WARN_ON_ONCE(id != virtio_mem_phys_to_bb_id(vm, start + size - 1))) | |
| return NOTIFY_BAD; | |
| } | |
| /* | |
| * Avoid circular locking lockdep warnings. We lock the mutex | |
| * e.g., in MEM_GOING_ONLINE and unlock it in MEM_ONLINE. The | |
| * blocking_notifier_call_chain() has it's own lock, which gets unlocked | |
| * between both notifier calls and will bail out. False positive. | |
| */ | |
| lockdep_off(); | |
| switch (action) { | |
| case MEM_GOING_OFFLINE: | |
| mutex_lock(&vm->hotplug_mutex); | |
| if (vm->removing) { | |
| rc = notifier_from_errno(-EBUSY); | |
| mutex_unlock(&vm->hotplug_mutex); | |
| break; | |
| } | |
| vm->hotplug_active = true; | |
| if (vm->in_sbm) | |
| virtio_mem_sbm_notify_going_offline(vm, id); | |
| else | |
| virtio_mem_bbm_notify_going_offline(vm, id, | |
| mhp->start_pfn, | |
| mhp->nr_pages); | |
| break; | |
| case MEM_GOING_ONLINE: | |
| mutex_lock(&vm->hotplug_mutex); | |
| if (vm->removing) { | |
| rc = notifier_from_errno(-EBUSY); | |
| mutex_unlock(&vm->hotplug_mutex); | |
| break; | |
| } | |
| vm->hotplug_active = true; | |
| if (vm->in_sbm) | |
| rc = virtio_mem_sbm_notify_going_online(vm, id); | |
| break; | |
| case MEM_OFFLINE: | |
| if (vm->in_sbm) | |
| virtio_mem_sbm_notify_offline(vm, id); | |
| atomic64_add(size, &vm->offline_size); | |
| /* | |
| * Trigger the workqueue. Now that we have some offline memory, | |
| * maybe we can handle pending unplug requests. | |
| */ | |
| if (!unplug_online) | |
| virtio_mem_retry(vm); | |
| vm->hotplug_active = false; | |
| mutex_unlock(&vm->hotplug_mutex); | |
| break; | |
| case MEM_ONLINE: | |
| if (vm->in_sbm) | |
| virtio_mem_sbm_notify_online(vm, id, mhp->start_pfn); | |
| atomic64_sub(size, &vm->offline_size); | |
| /* | |
| * Start adding more memory once we onlined half of our | |
| * threshold. Don't trigger if it's possibly due to our action | |
| * (e.g., us adding memory which gets onlined immediately from | |
| * the core). | |
| */ | |
| if (!atomic_read(&vm->wq_active) && | |
| virtio_mem_could_add_memory(vm, vm->offline_threshold / 2)) | |
| virtio_mem_retry(vm); | |
| vm->hotplug_active = false; | |
| mutex_unlock(&vm->hotplug_mutex); | |
| break; | |
| case MEM_CANCEL_OFFLINE: | |
| if (!vm->hotplug_active) | |
| break; | |
| if (vm->in_sbm) | |
| virtio_mem_sbm_notify_cancel_offline(vm, id); | |
| else | |
| virtio_mem_bbm_notify_cancel_offline(vm, id, | |
| mhp->start_pfn, | |
| mhp->nr_pages); | |
| vm->hotplug_active = false; | |
| mutex_unlock(&vm->hotplug_mutex); | |
| break; | |
| case MEM_CANCEL_ONLINE: | |
| if (!vm->hotplug_active) | |
| break; | |
| vm->hotplug_active = false; | |
| mutex_unlock(&vm->hotplug_mutex); | |
| break; | |
| default: | |
| break; | |
| } | |
| lockdep_on(); | |
| return rc; | |
| } | |
| static int virtio_mem_pm_notifier_cb(struct notifier_block *nb, | |
| unsigned long action, void *arg) | |
| { | |
| struct virtio_mem *vm = container_of(nb, struct virtio_mem, | |
| pm_notifier); | |
| switch (action) { | |
| case PM_HIBERNATION_PREPARE: | |
| case PM_RESTORE_PREPARE: | |
| /* | |
| * When restarting the VM, all memory is unplugged. Don't | |
| * allow to hibernate and restore from an image. | |
| */ | |
| dev_err(&vm->vdev->dev, "hibernation is not supported.\n"); | |
| return NOTIFY_BAD; | |
| default: | |
| return NOTIFY_OK; | |
| } | |
| } | |
| /* | |
| * Set a range of pages PG_offline. Remember pages that were never onlined | |
| * (via generic_online_page()) using PageDirty(). | |
| */ | |
| static void virtio_mem_set_fake_offline(unsigned long pfn, | |
| unsigned long nr_pages, bool onlined) | |
| { | |
| page_offline_begin(); | |
| for (; nr_pages--; pfn++) { | |
| struct page *page = pfn_to_page(pfn); | |
| if (!onlined) | |
| /* | |
| * Pages that have not been onlined yet were initialized | |
| * to PageOffline(). Remember that we have to route them | |
| * through generic_online_page(). | |
| */ | |
| SetPageDirty(page); | |
| else | |
| __SetPageOffline(page); | |
| VM_WARN_ON_ONCE(!PageOffline(page)); | |
| } | |
| page_offline_end(); | |
| } | |
| /* | |
| * Clear PG_offline from a range of pages. If the pages were never onlined, | |
| * (via generic_online_page()), clear PageDirty(). | |
| */ | |
| static void virtio_mem_clear_fake_offline(unsigned long pfn, | |
| unsigned long nr_pages, bool onlined) | |
| { | |
| for (; nr_pages--; pfn++) { | |
| struct page *page = pfn_to_page(pfn); | |
| if (!onlined) | |
| /* generic_online_page() will clear PageOffline(). */ | |
| ClearPageDirty(page); | |
| else | |
| __ClearPageOffline(page); | |
| } | |
| } | |
| /* | |
| * Release a range of fake-offline pages to the buddy, effectively | |
| * fake-onlining them. | |
| */ | |
| static void virtio_mem_fake_online(unsigned long pfn, unsigned long nr_pages) | |
| { | |
| unsigned long order = MAX_PAGE_ORDER; | |
| unsigned long i; | |
| /* | |
| * We might get called for ranges that don't cover properly aligned | |
| * MAX_PAGE_ORDER pages; however, we can only online properly aligned | |
| * pages with an order of MAX_PAGE_ORDER at maximum. | |
| */ | |
| while (!IS_ALIGNED(pfn | nr_pages, 1 << order)) | |
| order--; | |
| for (i = 0; i < nr_pages; i += 1 << order) { | |
| struct page *page = pfn_to_page(pfn + i); | |
| /* | |
| * If the page is PageDirty(), it was kept fake-offline when | |
| * onlining the memory block. Otherwise, it was allocated | |
| * using alloc_contig_range(). All pages in a subblock are | |
| * alike. | |
| */ | |
| if (PageDirty(page)) { | |
| virtio_mem_clear_fake_offline(pfn + i, 1 << order, false); | |
| generic_online_page(page, order); | |
| } else { | |
| virtio_mem_clear_fake_offline(pfn + i, 1 << order, true); | |
| free_contig_range(pfn + i, 1 << order); | |
| adjust_managed_page_count(page, 1 << order); | |
| } | |
| } | |
| } | |
| /* | |
| * Try to allocate a range, marking pages fake-offline, effectively | |
| * fake-offlining them. | |
| */ | |
| static int virtio_mem_fake_offline(struct virtio_mem *vm, unsigned long pfn, | |
| unsigned long nr_pages) | |
| { | |
| const bool is_movable = is_zone_movable_page(pfn_to_page(pfn)); | |
| int rc, retry_count; | |
| /* | |
| * TODO: We want an alloc_contig_range() mode that tries to allocate | |
| * harder (e.g., dealing with temporarily pinned pages, PCP), especially | |
| * with ZONE_MOVABLE. So for now, retry a couple of times with | |
| * ZONE_MOVABLE before giving up - because that zone is supposed to give | |
| * some guarantees. | |
| */ | |
| for (retry_count = 0; retry_count < 5; retry_count++) { | |
| /* | |
| * If the config changed, stop immediately and go back to the | |
| * main loop: avoid trying to keep unplugging if the device | |
| * might have decided to not remove any more memory. | |
| */ | |
| if (atomic_read(&vm->config_changed)) | |
| return -EAGAIN; | |
| rc = alloc_contig_range(pfn, pfn + nr_pages, ACR_FLAGS_NONE, | |
| GFP_KERNEL); | |
| if (rc == -ENOMEM) | |
| /* whoops, out of memory */ | |
| return rc; | |
| else if (rc && !is_movable) | |
| break; | |
| else if (rc) | |
| continue; | |
| virtio_mem_set_fake_offline(pfn, nr_pages, true); | |
| adjust_managed_page_count(pfn_to_page(pfn), -nr_pages); | |
| return 0; | |
| } | |
| return -EBUSY; | |
| } | |
| /* | |
| * Handle fake-offline pages when memory is going offline - such that the | |
| * pages can be skipped by mm-core when offlining. | |
| */ | |
| static void virtio_mem_fake_offline_going_offline(unsigned long pfn, | |
| unsigned long nr_pages) | |
| { | |
| struct page *page; | |
| unsigned long i; | |
| /* Drop our reference to the pages so the memory can get offlined. */ | |
| for (i = 0; i < nr_pages; i++) { | |
| page = pfn_to_page(pfn + i); | |
| if (WARN_ON(!page_ref_dec_and_test(page))) | |
| dump_page(page, "fake-offline page referenced"); | |
| } | |
| } | |
| /* | |
| * Handle fake-offline pages when memory offlining is canceled - to undo | |
| * what we did in virtio_mem_fake_offline_going_offline(). | |
| */ | |
| static void virtio_mem_fake_offline_cancel_offline(unsigned long pfn, | |
| unsigned long nr_pages) | |
| { | |
| unsigned long i; | |
| /* | |
| * Get the reference again that we dropped via page_ref_dec_and_test() | |
| * when going offline. | |
| */ | |
| for (i = 0; i < nr_pages; i++) | |
| page_ref_inc(pfn_to_page(pfn + i)); | |
| } | |
| static void virtio_mem_online_page(struct virtio_mem *vm, | |
| struct page *page, unsigned int order) | |
| { | |
| const unsigned long start = page_to_phys(page); | |
| const unsigned long end = start + PFN_PHYS(1 << order); | |
| unsigned long addr, next, id, sb_id, count; | |
| bool do_online; | |
| /* | |
| * We can get called with any order up to MAX_PAGE_ORDER. If our subblock | |
| * size is smaller than that and we have a mixture of plugged and | |
| * unplugged subblocks within such a page, we have to process in | |
| * smaller granularity. In that case we'll adjust the order exactly once | |
| * within the loop. | |
| */ | |
| for (addr = start; addr < end; ) { | |
| next = addr + PFN_PHYS(1 << order); | |
| if (vm->in_sbm) { | |
| id = virtio_mem_phys_to_mb_id(addr); | |
| sb_id = virtio_mem_phys_to_sb_id(vm, addr); | |
| count = virtio_mem_phys_to_sb_id(vm, next - 1) - sb_id + 1; | |
| if (virtio_mem_sbm_test_sb_plugged(vm, id, sb_id, count)) { | |
| /* Fully plugged. */ | |
| do_online = true; | |
| } else if (count == 1 || | |
| virtio_mem_sbm_test_sb_unplugged(vm, id, sb_id, count)) { | |
| /* Fully unplugged. */ | |
| do_online = false; | |
| } else { | |
| /* | |
| * Mixture, process sub-blocks instead. This | |
| * will be at least the size of a pageblock. | |
| * We'll run into this case exactly once. | |
| */ | |
| order = ilog2(vm->sbm.sb_size) - PAGE_SHIFT; | |
| do_online = virtio_mem_sbm_test_sb_plugged(vm, id, sb_id, 1); | |
| continue; | |
| } | |
| } else { | |
| /* | |
| * If the whole block is marked fake offline, keep | |
| * everything that way. | |
| */ | |
| id = virtio_mem_phys_to_bb_id(vm, addr); | |
| do_online = virtio_mem_bbm_get_bb_state(vm, id) != | |
| VIRTIO_MEM_BBM_BB_FAKE_OFFLINE; | |
| } | |
| if (do_online) | |
| generic_online_page(pfn_to_page(PFN_DOWN(addr)), order); | |
| else | |
| virtio_mem_set_fake_offline(PFN_DOWN(addr), 1 << order, | |
| false); | |
| addr = next; | |
| } | |
| } | |
| static void virtio_mem_online_page_cb(struct page *page, unsigned int order) | |
| { | |
| const unsigned long addr = page_to_phys(page); | |
| struct virtio_mem *vm; | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(vm, &virtio_mem_devices, next) { | |
| /* | |
| * Pages we're onlining will never cross memory blocks and, | |
| * therefore, not virtio-mem devices. | |
| */ | |
| if (!virtio_mem_contains_range(vm, addr, PFN_PHYS(1 << order))) | |
| continue; | |
| /* | |
| * virtio_mem_set_fake_offline() might sleep. We can safely | |
| * drop the RCU lock at this point because the device | |
| * cannot go away. See virtio_mem_remove() how races | |
| * between memory onlining and device removal are handled. | |
| */ | |
| rcu_read_unlock(); | |
| virtio_mem_online_page(vm, page, order); | |
| return; | |
| } | |
| rcu_read_unlock(); | |
| /* not virtio-mem memory, but e.g., a DIMM. online it */ | |
| generic_online_page(page, order); | |
| } | |
| static uint64_t virtio_mem_send_request(struct virtio_mem *vm, | |
| const struct virtio_mem_req *req) | |
| { | |
| struct scatterlist *sgs[2], sg_req, sg_resp; | |
| unsigned int len; | |
| int rc; | |
| /* don't use the request residing on the stack (vaddr) */ | |
| vm->req = *req; | |
| /* out: buffer for request */ | |
| sg_init_one(&sg_req, &vm->req, sizeof(vm->req)); | |
| sgs[0] = &sg_req; | |
| /* in: buffer for response */ | |
| sg_init_one(&sg_resp, &vm->resp, sizeof(vm->resp)); | |
| sgs[1] = &sg_resp; | |
| rc = virtqueue_add_sgs(vm->vq, sgs, 1, 1, vm, GFP_KERNEL); | |
| if (rc < 0) | |
| return rc; | |
| virtqueue_kick(vm->vq); | |
| /* wait for a response */ | |
| wait_event(vm->host_resp, virtqueue_get_buf(vm->vq, &len)); | |
| return virtio16_to_cpu(vm->vdev, vm->resp.type); | |
| } | |
| static int virtio_mem_send_plug_request(struct virtio_mem *vm, uint64_t addr, | |
| uint64_t size) | |
| { | |
| const uint64_t nb_vm_blocks = size / vm->device_block_size; | |
| const struct virtio_mem_req req = { | |
| .type = cpu_to_virtio16(vm->vdev, VIRTIO_MEM_REQ_PLUG), | |
| .u.plug.addr = cpu_to_virtio64(vm->vdev, addr), | |
| .u.plug.nb_blocks = cpu_to_virtio16(vm->vdev, nb_vm_blocks), | |
| }; | |
| int rc = -ENOMEM; | |
| if (atomic_read(&vm->config_changed)) | |
| return -EAGAIN; | |
| dev_dbg(&vm->vdev->dev, "plugging memory: 0x%llx - 0x%llx\n", addr, | |
| addr + size - 1); | |
| switch (virtio_mem_send_request(vm, &req)) { | |
| case VIRTIO_MEM_RESP_ACK: | |
| vm->plugged_size += size; | |
| return 0; | |
| case VIRTIO_MEM_RESP_NACK: | |
| rc = -EAGAIN; | |
| break; | |
| case VIRTIO_MEM_RESP_BUSY: | |
| rc = -ETXTBSY; | |
| break; | |
| case VIRTIO_MEM_RESP_ERROR: | |
| rc = -EINVAL; | |
| break; | |
| default: | |
| break; | |
| } | |
| dev_dbg(&vm->vdev->dev, "plugging memory failed: %d\n", rc); | |
| return rc; | |
| } | |
| static int virtio_mem_send_unplug_request(struct virtio_mem *vm, uint64_t addr, | |
| uint64_t size) | |
| { | |
| const uint64_t nb_vm_blocks = size / vm->device_block_size; | |
| const struct virtio_mem_req req = { | |
| .type = cpu_to_virtio16(vm->vdev, VIRTIO_MEM_REQ_UNPLUG), | |
| .u.unplug.addr = cpu_to_virtio64(vm->vdev, addr), | |
| .u.unplug.nb_blocks = cpu_to_virtio16(vm->vdev, nb_vm_blocks), | |
| }; | |
| int rc = -ENOMEM; | |
| if (atomic_read(&vm->config_changed)) | |
| return -EAGAIN; | |
| dev_dbg(&vm->vdev->dev, "unplugging memory: 0x%llx - 0x%llx\n", addr, | |
| addr + size - 1); | |
| switch (virtio_mem_send_request(vm, &req)) { | |
| case VIRTIO_MEM_RESP_ACK: | |
| vm->plugged_size -= size; | |
| return 0; | |
| case VIRTIO_MEM_RESP_BUSY: | |
| rc = -ETXTBSY; | |
| break; | |
| case VIRTIO_MEM_RESP_ERROR: | |
| rc = -EINVAL; | |
| break; | |
| default: | |
| break; | |
| } | |
| dev_dbg(&vm->vdev->dev, "unplugging memory failed: %d\n", rc); | |
| return rc; | |
| } | |
| static int virtio_mem_send_unplug_all_request(struct virtio_mem *vm) | |
| { | |
| const struct virtio_mem_req req = { | |
| .type = cpu_to_virtio16(vm->vdev, VIRTIO_MEM_REQ_UNPLUG_ALL), | |
| }; | |
| int rc = -ENOMEM; | |
| dev_dbg(&vm->vdev->dev, "unplugging all memory"); | |
| switch (virtio_mem_send_request(vm, &req)) { | |
| case VIRTIO_MEM_RESP_ACK: | |
| vm->unplug_all_required = false; | |
| vm->plugged_size = 0; | |
| /* usable region might have shrunk */ | |
| atomic_set(&vm->config_changed, 1); | |
| return 0; | |
| case VIRTIO_MEM_RESP_BUSY: | |
| rc = -ETXTBSY; | |
| break; | |
| default: | |
| break; | |
| } | |
| dev_dbg(&vm->vdev->dev, "unplugging all memory failed: %d\n", rc); | |
| return rc; | |
| } | |
| /* | |
| * Plug selected subblocks. Updates the plugged state, but not the state | |
| * of the memory block. | |
| */ | |
| static int virtio_mem_sbm_plug_sb(struct virtio_mem *vm, unsigned long mb_id, | |
| int sb_id, int count) | |
| { | |
| const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id) + | |
| sb_id * vm->sbm.sb_size; | |
| const uint64_t size = count * vm->sbm.sb_size; | |
| int rc; | |
| rc = virtio_mem_send_plug_request(vm, addr, size); | |
| if (!rc) | |
| virtio_mem_sbm_set_sb_plugged(vm, mb_id, sb_id, count); | |
| return rc; | |
| } | |
| /* | |
| * Unplug selected subblocks. Updates the plugged state, but not the state | |
| * of the memory block. | |
| */ | |
| static int virtio_mem_sbm_unplug_sb(struct virtio_mem *vm, unsigned long mb_id, | |
| int sb_id, int count) | |
| { | |
| const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id) + | |
| sb_id * vm->sbm.sb_size; | |
| const uint64_t size = count * vm->sbm.sb_size; | |
| int rc; | |
| rc = virtio_mem_send_unplug_request(vm, addr, size); | |
| if (!rc) | |
| virtio_mem_sbm_set_sb_unplugged(vm, mb_id, sb_id, count); | |
| return rc; | |
| } | |
| /* | |
| * Request to unplug a big block. | |
| * | |
| * Will not modify the state of the big block. | |
| */ | |
| static int virtio_mem_bbm_unplug_bb(struct virtio_mem *vm, unsigned long bb_id) | |
| { | |
| const uint64_t addr = virtio_mem_bb_id_to_phys(vm, bb_id); | |
| const uint64_t size = vm->bbm.bb_size; | |
| return virtio_mem_send_unplug_request(vm, addr, size); | |
| } | |
| /* | |
| * Request to plug a big block. | |
| * | |
| * Will not modify the state of the big block. | |
| */ | |
| static int virtio_mem_bbm_plug_bb(struct virtio_mem *vm, unsigned long bb_id) | |
| { | |
| const uint64_t addr = virtio_mem_bb_id_to_phys(vm, bb_id); | |
| const uint64_t size = vm->bbm.bb_size; | |
| return virtio_mem_send_plug_request(vm, addr, size); | |
| } | |
| /* | |
| * Unplug the desired number of plugged subblocks of a offline or not-added | |
| * memory block. Will fail if any subblock cannot get unplugged (instead of | |
| * skipping it). | |
| * | |
| * Will not modify the state of the memory block. | |
| * | |
| * Note: can fail after some subblocks were unplugged. | |
| */ | |
| static int virtio_mem_sbm_unplug_any_sb_raw(struct virtio_mem *vm, | |
| unsigned long mb_id, uint64_t *nb_sb) | |
| { | |
| int sb_id, count; | |
| int rc; | |
| sb_id = vm->sbm.sbs_per_mb - 1; | |
| while (*nb_sb) { | |
| /* Find the next candidate subblock */ | |
| while (sb_id >= 0 && | |
| virtio_mem_sbm_test_sb_unplugged(vm, mb_id, sb_id, 1)) | |
| sb_id--; | |
| if (sb_id < 0) | |
| break; | |
| /* Try to unplug multiple subblocks at a time */ | |
| count = 1; | |
| while (count < *nb_sb && sb_id > 0 && | |
| virtio_mem_sbm_test_sb_plugged(vm, mb_id, sb_id - 1, 1)) { | |
| count++; | |
| sb_id--; | |
| } | |
| rc = virtio_mem_sbm_unplug_sb(vm, mb_id, sb_id, count); | |
| if (rc) | |
| return rc; | |
| *nb_sb -= count; | |
| sb_id--; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Unplug all plugged subblocks of an offline or not-added memory block. | |
| * | |
| * Will not modify the state of the memory block. | |
| * | |
| * Note: can fail after some subblocks were unplugged. | |
| */ | |
| static int virtio_mem_sbm_unplug_mb(struct virtio_mem *vm, unsigned long mb_id) | |
| { | |
| uint64_t nb_sb = vm->sbm.sbs_per_mb; | |
| return virtio_mem_sbm_unplug_any_sb_raw(vm, mb_id, &nb_sb); | |
| } | |
| /* | |
| * Prepare tracking data for the next memory block. | |
| */ | |
| static int virtio_mem_sbm_prepare_next_mb(struct virtio_mem *vm, | |
| unsigned long *mb_id) | |
| { | |
| int rc; | |
| if (vm->sbm.next_mb_id > vm->sbm.last_usable_mb_id) | |
| return -ENOSPC; | |
| /* Resize the state array if required. */ | |
| rc = virtio_mem_sbm_mb_states_prepare_next_mb(vm); | |
| if (rc) | |
| return rc; | |
| /* Resize the subblock bitmap if required. */ | |
| rc = virtio_mem_sbm_sb_states_prepare_next_mb(vm); | |
| if (rc) | |
| return rc; | |
| vm->sbm.mb_count[VIRTIO_MEM_SBM_MB_UNUSED]++; | |
| *mb_id = vm->sbm.next_mb_id++; | |
| return 0; | |
| } | |
| /* | |
| * Try to plug the desired number of subblocks and add the memory block | |
| * to Linux. | |
| * | |
| * Will modify the state of the memory block. | |
| */ | |
| static int virtio_mem_sbm_plug_and_add_mb(struct virtio_mem *vm, | |
| unsigned long mb_id, uint64_t *nb_sb) | |
| { | |
| const int count = min_t(int, *nb_sb, vm->sbm.sbs_per_mb); | |
| int rc; | |
| if (WARN_ON_ONCE(!count)) | |
| return -EINVAL; | |
| /* | |
| * Plug the requested number of subblocks before adding it to linux, | |
| * so that onlining will directly online all plugged subblocks. | |
| */ | |
| rc = virtio_mem_sbm_plug_sb(vm, mb_id, 0, count); | |
| if (rc) | |
| return rc; | |
| /* | |
| * Mark the block properly offline before adding it to Linux, | |
| * so the memory notifiers will find the block in the right state. | |
| */ | |
| if (count == vm->sbm.sbs_per_mb) | |
| virtio_mem_sbm_set_mb_state(vm, mb_id, | |
| VIRTIO_MEM_SBM_MB_OFFLINE); | |
| else | |
| virtio_mem_sbm_set_mb_state(vm, mb_id, | |
| VIRTIO_MEM_SBM_MB_OFFLINE_PARTIAL); | |
| /* Add the memory block to linux - if that fails, try to unplug. */ | |
| rc = virtio_mem_sbm_add_mb(vm, mb_id); | |
| if (rc) { | |
| int new_state = VIRTIO_MEM_SBM_MB_UNUSED; | |
| if (virtio_mem_sbm_unplug_sb(vm, mb_id, 0, count)) | |
| new_state = VIRTIO_MEM_SBM_MB_PLUGGED; | |
| virtio_mem_sbm_set_mb_state(vm, mb_id, new_state); | |
| return rc; | |
| } | |
| *nb_sb -= count; | |
| return 0; | |
| } | |
| /* | |
| * Try to plug the desired number of subblocks of a memory block that | |
| * is already added to Linux. | |
| * | |
| * Will modify the state of the memory block. | |
| * | |
| * Note: Can fail after some subblocks were successfully plugged. | |
| */ | |
| static int virtio_mem_sbm_plug_any_sb(struct virtio_mem *vm, | |
| unsigned long mb_id, uint64_t *nb_sb) | |
| { | |
| const int old_state = virtio_mem_sbm_get_mb_state(vm, mb_id); | |
| unsigned long pfn, nr_pages; | |
| int sb_id, count; | |
| int rc; | |
| if (WARN_ON_ONCE(!*nb_sb)) | |
| return -EINVAL; | |
| while (*nb_sb) { | |
| sb_id = virtio_mem_sbm_first_unplugged_sb(vm, mb_id); | |
| if (sb_id >= vm->sbm.sbs_per_mb) | |
| break; | |
| count = 1; | |
| while (count < *nb_sb && | |
| sb_id + count < vm->sbm.sbs_per_mb && | |
| !virtio_mem_sbm_test_sb_plugged(vm, mb_id, sb_id + count, 1)) | |
| count++; | |
| rc = virtio_mem_sbm_plug_sb(vm, mb_id, sb_id, count); | |
| if (rc) | |
| return rc; | |
| *nb_sb -= count; | |
| if (old_state == VIRTIO_MEM_SBM_MB_OFFLINE_PARTIAL) | |
| continue; | |
| /* fake-online the pages if the memory block is online */ | |
| pfn = PFN_DOWN(virtio_mem_mb_id_to_phys(mb_id) + | |
| sb_id * vm->sbm.sb_size); | |
| nr_pages = PFN_DOWN(count * vm->sbm.sb_size); | |
| virtio_mem_fake_online(pfn, nr_pages); | |
| } | |
| if (virtio_mem_sbm_test_sb_plugged(vm, mb_id, 0, vm->sbm.sbs_per_mb)) | |
| virtio_mem_sbm_set_mb_state(vm, mb_id, old_state - 1); | |
| return 0; | |
| } | |
| static int virtio_mem_sbm_plug_request(struct virtio_mem *vm, uint64_t diff) | |
| { | |
| const int mb_states[] = { | |
| VIRTIO_MEM_SBM_MB_KERNEL_PARTIAL, | |
| VIRTIO_MEM_SBM_MB_MOVABLE_PARTIAL, | |
| VIRTIO_MEM_SBM_MB_OFFLINE_PARTIAL, | |
| }; | |
| uint64_t nb_sb = diff / vm->sbm.sb_size; | |
| unsigned long mb_id; | |
| int rc, i; | |
| if (!nb_sb) | |
| return 0; | |
| /* Don't race with onlining/offlining */ | |
| mutex_lock(&vm->hotplug_mutex); | |
| for (i = 0; i < ARRAY_SIZE(mb_states); i++) { | |
| virtio_mem_sbm_for_each_mb(vm, mb_id, mb_states[i]) { | |
| rc = virtio_mem_sbm_plug_any_sb(vm, mb_id, &nb_sb); | |
| if (rc || !nb_sb) | |
| goto out_unlock; | |
| cond_resched(); | |
| } | |
| } | |
| /* | |
| * We won't be working on online/offline memory blocks from this point, | |
| * so we can't race with memory onlining/offlining. Drop the mutex. | |
| */ | |
| mutex_unlock(&vm->hotplug_mutex); | |
| /* Try to plug and add unused blocks */ | |
| virtio_mem_sbm_for_each_mb(vm, mb_id, VIRTIO_MEM_SBM_MB_UNUSED) { | |
| if (!virtio_mem_could_add_memory(vm, memory_block_size_bytes())) | |
| return -ENOSPC; | |
| rc = virtio_mem_sbm_plug_and_add_mb(vm, mb_id, &nb_sb); | |
| if (rc || !nb_sb) | |
| return rc; | |
| cond_resched(); | |
| } | |
| /* Try to prepare, plug and add new blocks */ | |
| while (nb_sb) { | |
| if (!virtio_mem_could_add_memory(vm, memory_block_size_bytes())) | |
| return -ENOSPC; | |
| rc = virtio_mem_sbm_prepare_next_mb(vm, &mb_id); | |
| if (rc) | |
| return rc; | |
| rc = virtio_mem_sbm_plug_and_add_mb(vm, mb_id, &nb_sb); | |
| if (rc) | |
| return rc; | |
| cond_resched(); | |
| } | |
| return 0; | |
| out_unlock: | |
| mutex_unlock(&vm->hotplug_mutex); | |
| return rc; | |
| } | |
| /* | |
| * Plug a big block and add it to Linux. | |
| * | |
| * Will modify the state of the big block. | |
| */ | |
| static int virtio_mem_bbm_plug_and_add_bb(struct virtio_mem *vm, | |
| unsigned long bb_id) | |
| { | |
| int rc; | |
| if (WARN_ON_ONCE(virtio_mem_bbm_get_bb_state(vm, bb_id) != | |
| VIRTIO_MEM_BBM_BB_UNUSED)) | |
| return -EINVAL; | |
| rc = virtio_mem_bbm_plug_bb(vm, bb_id); | |
| if (rc) | |
| return rc; | |
| virtio_mem_bbm_set_bb_state(vm, bb_id, VIRTIO_MEM_BBM_BB_ADDED); | |
| rc = virtio_mem_bbm_add_bb(vm, bb_id); | |
| if (rc) { | |
| if (!virtio_mem_bbm_unplug_bb(vm, bb_id)) | |
| virtio_mem_bbm_set_bb_state(vm, bb_id, | |
| VIRTIO_MEM_BBM_BB_UNUSED); | |
| else | |
| /* Retry from the main loop. */ | |
| virtio_mem_bbm_set_bb_state(vm, bb_id, | |
| VIRTIO_MEM_BBM_BB_PLUGGED); | |
| return rc; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Prepare tracking data for the next big block. | |
| */ | |
| static int virtio_mem_bbm_prepare_next_bb(struct virtio_mem *vm, | |
| unsigned long *bb_id) | |
| { | |
| int rc; | |
| if (vm->bbm.next_bb_id > vm->bbm.last_usable_bb_id) | |
| return -ENOSPC; | |
| /* Resize the big block state array if required. */ | |
| rc = virtio_mem_bbm_bb_states_prepare_next_bb(vm); | |
| if (rc) | |
| return rc; | |
| vm->bbm.bb_count[VIRTIO_MEM_BBM_BB_UNUSED]++; | |
| *bb_id = vm->bbm.next_bb_id; | |
| vm->bbm.next_bb_id++; | |
| return 0; | |
| } | |
| static int virtio_mem_bbm_plug_request(struct virtio_mem *vm, uint64_t diff) | |
| { | |
| uint64_t nb_bb = diff / vm->bbm.bb_size; | |
| unsigned long bb_id; | |
| int rc; | |
| if (!nb_bb) | |
| return 0; | |
| /* Try to plug and add unused big blocks */ | |
| virtio_mem_bbm_for_each_bb(vm, bb_id, VIRTIO_MEM_BBM_BB_UNUSED) { | |
| if (!virtio_mem_could_add_memory(vm, vm->bbm.bb_size)) | |
| return -ENOSPC; | |
| rc = virtio_mem_bbm_plug_and_add_bb(vm, bb_id); | |
| if (!rc) | |
| nb_bb--; | |
| if (rc || !nb_bb) | |
| return rc; | |
| cond_resched(); | |
| } | |
| /* Try to prepare, plug and add new big blocks */ | |
| while (nb_bb) { | |
| if (!virtio_mem_could_add_memory(vm, vm->bbm.bb_size)) | |
| return -ENOSPC; | |
| rc = virtio_mem_bbm_prepare_next_bb(vm, &bb_id); | |
| if (rc) | |
| return rc; | |
| rc = virtio_mem_bbm_plug_and_add_bb(vm, bb_id); | |
| if (!rc) | |
| nb_bb--; | |
| if (rc) | |
| return rc; | |
| cond_resched(); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Try to plug the requested amount of memory. | |
| */ | |
| static int virtio_mem_plug_request(struct virtio_mem *vm, uint64_t diff) | |
| { | |
| if (vm->in_sbm) | |
| return virtio_mem_sbm_plug_request(vm, diff); | |
| return virtio_mem_bbm_plug_request(vm, diff); | |
| } | |
| /* | |
| * Unplug the desired number of plugged subblocks of an offline memory block. | |
| * Will fail if any subblock cannot get unplugged (instead of skipping it). | |
| * | |
| * Will modify the state of the memory block. Might temporarily drop the | |
| * hotplug_mutex. | |
| * | |
| * Note: Can fail after some subblocks were successfully unplugged. | |
| */ | |
| static int virtio_mem_sbm_unplug_any_sb_offline(struct virtio_mem *vm, | |
| unsigned long mb_id, | |
| uint64_t *nb_sb) | |
| { | |
| int rc; | |
| rc = virtio_mem_sbm_unplug_any_sb_raw(vm, mb_id, nb_sb); | |
| /* some subblocks might have been unplugged even on failure */ | |
| if (!virtio_mem_sbm_test_sb_plugged(vm, mb_id, 0, vm->sbm.sbs_per_mb)) | |
| virtio_mem_sbm_set_mb_state(vm, mb_id, | |
| VIRTIO_MEM_SBM_MB_OFFLINE_PARTIAL); | |
| if (rc) | |
| return rc; | |
| if (virtio_mem_sbm_test_sb_unplugged(vm, mb_id, 0, vm->sbm.sbs_per_mb)) { | |
| /* | |
| * Remove the block from Linux - this should never fail. | |
| * Hinder the block from getting onlined by marking it | |
| * unplugged. Temporarily drop the mutex, so | |
| * any pending GOING_ONLINE requests can be serviced/rejected. | |
| */ | |
| virtio_mem_sbm_set_mb_state(vm, mb_id, | |
| VIRTIO_MEM_SBM_MB_UNUSED); | |
| mutex_unlock(&vm->hotplug_mutex); | |
| rc = virtio_mem_sbm_remove_mb(vm, mb_id); | |
| BUG_ON(rc); | |
| mutex_lock(&vm->hotplug_mutex); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Unplug the given plugged subblocks of an online memory block. | |
| * | |
| * Will modify the state of the memory block. | |
| */ | |
| static int virtio_mem_sbm_unplug_sb_online(struct virtio_mem *vm, | |
| unsigned long mb_id, int sb_id, | |
| int count) | |
| { | |
| const unsigned long nr_pages = PFN_DOWN(vm->sbm.sb_size) * count; | |
| const int old_state = virtio_mem_sbm_get_mb_state(vm, mb_id); | |
| unsigned long start_pfn; | |
| int rc; | |
| start_pfn = PFN_DOWN(virtio_mem_mb_id_to_phys(mb_id) + | |
| sb_id * vm->sbm.sb_size); | |
| rc = virtio_mem_fake_offline(vm, start_pfn, nr_pages); | |
| if (rc) | |
| return rc; | |
| /* Try to unplug the allocated memory */ | |
| rc = virtio_mem_sbm_unplug_sb(vm, mb_id, sb_id, count); | |
| if (rc) { | |
| /* Return the memory to the buddy. */ | |
| virtio_mem_fake_online(start_pfn, nr_pages); | |
| return rc; | |
| } | |
| switch (old_state) { | |
| case VIRTIO_MEM_SBM_MB_KERNEL: | |
| virtio_mem_sbm_set_mb_state(vm, mb_id, | |
| VIRTIO_MEM_SBM_MB_KERNEL_PARTIAL); | |
| break; | |
| case VIRTIO_MEM_SBM_MB_MOVABLE: | |
| virtio_mem_sbm_set_mb_state(vm, mb_id, | |
| VIRTIO_MEM_SBM_MB_MOVABLE_PARTIAL); | |
| break; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Unplug the desired number of plugged subblocks of an online memory block. | |
| * Will skip subblock that are busy. | |
| * | |
| * Will modify the state of the memory block. Might temporarily drop the | |
| * hotplug_mutex. | |
| * | |
| * Note: Can fail after some subblocks were successfully unplugged. Can | |
| * return 0 even if subblocks were busy and could not get unplugged. | |
| */ | |
| static int virtio_mem_sbm_unplug_any_sb_online(struct virtio_mem *vm, | |
| unsigned long mb_id, | |
| uint64_t *nb_sb) | |
| { | |
| int rc, sb_id; | |
| /* If possible, try to unplug the complete block in one shot. */ | |
| if (*nb_sb >= vm->sbm.sbs_per_mb && | |
| virtio_mem_sbm_test_sb_plugged(vm, mb_id, 0, vm->sbm.sbs_per_mb)) { | |
| rc = virtio_mem_sbm_unplug_sb_online(vm, mb_id, 0, | |
| vm->sbm.sbs_per_mb); | |
| if (!rc) { | |
| *nb_sb -= vm->sbm.sbs_per_mb; | |
| goto unplugged; | |
| } else if (rc != -EBUSY) | |
| return rc; | |
| } | |
| /* Fallback to single subblocks. */ | |
| for (sb_id = vm->sbm.sbs_per_mb - 1; sb_id >= 0 && *nb_sb; sb_id--) { | |
| /* Find the next candidate subblock */ | |
| while (sb_id >= 0 && | |
| !virtio_mem_sbm_test_sb_plugged(vm, mb_id, sb_id, 1)) | |
| sb_id--; | |
| if (sb_id < 0) | |
| break; | |
| rc = virtio_mem_sbm_unplug_sb_online(vm, mb_id, sb_id, 1); | |
| if (rc == -EBUSY) | |
| continue; | |
| else if (rc) | |
| return rc; | |
| *nb_sb -= 1; | |
| } | |
| unplugged: | |
| rc = virtio_mem_sbm_try_remove_unplugged_mb(vm, mb_id); | |
| if (rc) | |
| vm->sbm.have_unplugged_mb = 1; | |
| /* Ignore errors, this is not critical. We'll retry later. */ | |
| return 0; | |
| } | |
| /* | |
| * Unplug the desired number of plugged subblocks of a memory block that is | |
| * already added to Linux. Will skip subblock of online memory blocks that are | |
| * busy (by the OS). Will fail if any subblock that's not busy cannot get | |
| * unplugged. | |
| * | |
| * Will modify the state of the memory block. Might temporarily drop the | |
| * hotplug_mutex. | |
| * | |
| * Note: Can fail after some subblocks were successfully unplugged. Can | |
| * return 0 even if subblocks were busy and could not get unplugged. | |
| */ | |
| static int virtio_mem_sbm_unplug_any_sb(struct virtio_mem *vm, | |
| unsigned long mb_id, | |
| uint64_t *nb_sb) | |
| { | |
| const int old_state = virtio_mem_sbm_get_mb_state(vm, mb_id); | |
| switch (old_state) { | |
| case VIRTIO_MEM_SBM_MB_KERNEL_PARTIAL: | |
| case VIRTIO_MEM_SBM_MB_KERNEL: | |
| case VIRTIO_MEM_SBM_MB_MOVABLE_PARTIAL: | |
| case VIRTIO_MEM_SBM_MB_MOVABLE: | |
| return virtio_mem_sbm_unplug_any_sb_online(vm, mb_id, nb_sb); | |
| case VIRTIO_MEM_SBM_MB_OFFLINE_PARTIAL: | |
| case VIRTIO_MEM_SBM_MB_OFFLINE: | |
| return virtio_mem_sbm_unplug_any_sb_offline(vm, mb_id, nb_sb); | |
| } | |
| return -EINVAL; | |
| } | |
| static int virtio_mem_sbm_unplug_request(struct virtio_mem *vm, uint64_t diff) | |
| { | |
| const int mb_states[] = { | |
| VIRTIO_MEM_SBM_MB_OFFLINE_PARTIAL, | |
| VIRTIO_MEM_SBM_MB_OFFLINE, | |
| VIRTIO_MEM_SBM_MB_MOVABLE_PARTIAL, | |
| VIRTIO_MEM_SBM_MB_KERNEL_PARTIAL, | |
| VIRTIO_MEM_SBM_MB_MOVABLE, | |
| VIRTIO_MEM_SBM_MB_KERNEL, | |
| }; | |
| uint64_t nb_sb = diff / vm->sbm.sb_size; | |
| unsigned long mb_id; | |
| int rc, i; | |
| if (!nb_sb) | |
| return 0; | |
| /* | |
| * We'll drop the mutex a couple of times when it is safe to do so. | |
| * This might result in some blocks switching the state (online/offline) | |
| * and we could miss them in this run - we will retry again later. | |
| */ | |
| mutex_lock(&vm->hotplug_mutex); | |
| /* | |
| * We try unplug from partially plugged blocks first, to try removing | |
| * whole memory blocks along with metadata. We prioritize ZONE_MOVABLE | |
| * as it's more reliable to unplug memory and remove whole memory | |
| * blocks, and we don't want to trigger a zone imbalances by | |
| * accidentially removing too much kernel memory. | |
| */ | |
| for (i = 0; i < ARRAY_SIZE(mb_states); i++) { | |
| virtio_mem_sbm_for_each_mb_rev(vm, mb_id, mb_states[i]) { | |
| rc = virtio_mem_sbm_unplug_any_sb(vm, mb_id, &nb_sb); | |
| if (rc || !nb_sb) | |
| goto out_unlock; | |
| mutex_unlock(&vm->hotplug_mutex); | |
| cond_resched(); | |
| mutex_lock(&vm->hotplug_mutex); | |
| } | |
| if (!unplug_online && i == 1) { | |
| mutex_unlock(&vm->hotplug_mutex); | |
| return 0; | |
| } | |
| } | |
| mutex_unlock(&vm->hotplug_mutex); | |
| return nb_sb ? -EBUSY : 0; | |
| out_unlock: | |
| mutex_unlock(&vm->hotplug_mutex); | |
| return rc; | |
| } | |
| /* | |
| * Try to offline and remove a big block from Linux and unplug it. Will fail | |
| * with -EBUSY if some memory is busy and cannot get unplugged. | |
| * | |
| * Will modify the state of the memory block. Might temporarily drop the | |
| * hotplug_mutex. | |
| */ | |
| static int virtio_mem_bbm_offline_remove_and_unplug_bb(struct virtio_mem *vm, | |
| unsigned long bb_id) | |
| { | |
| const unsigned long start_pfn = PFN_DOWN(virtio_mem_bb_id_to_phys(vm, bb_id)); | |
| const unsigned long nr_pages = PFN_DOWN(vm->bbm.bb_size); | |
| unsigned long end_pfn = start_pfn + nr_pages; | |
| unsigned long pfn; | |
| struct page *page; | |
| int rc; | |
| if (WARN_ON_ONCE(virtio_mem_bbm_get_bb_state(vm, bb_id) != | |
| VIRTIO_MEM_BBM_BB_ADDED)) | |
| return -EINVAL; | |
| /* | |
| * Start by fake-offlining all memory. Once we marked the device | |
| * block as fake-offline, all newly onlined memory will | |
| * automatically be kept fake-offline. Protect from concurrent | |
| * onlining/offlining until we have a consistent state. | |
| */ | |
| mutex_lock(&vm->hotplug_mutex); | |
| virtio_mem_bbm_set_bb_state(vm, bb_id, VIRTIO_MEM_BBM_BB_FAKE_OFFLINE); | |
| for (pfn = start_pfn; pfn < end_pfn; pfn += PAGES_PER_SECTION) { | |
| page = pfn_to_online_page(pfn); | |
| if (!page) | |
| continue; | |
| rc = virtio_mem_fake_offline(vm, pfn, PAGES_PER_SECTION); | |
| if (rc) { | |
| end_pfn = pfn; | |
| goto rollback; | |
| } | |
| } | |
| mutex_unlock(&vm->hotplug_mutex); | |
| rc = virtio_mem_bbm_offline_and_remove_bb(vm, bb_id); | |
| if (rc) { | |
| mutex_lock(&vm->hotplug_mutex); | |
| goto rollback; | |
| } | |
| rc = virtio_mem_bbm_unplug_bb(vm, bb_id); | |
| if (rc) | |
| virtio_mem_bbm_set_bb_state(vm, bb_id, | |
| VIRTIO_MEM_BBM_BB_PLUGGED); | |
| else | |
| virtio_mem_bbm_set_bb_state(vm, bb_id, | |
| VIRTIO_MEM_BBM_BB_UNUSED); | |
| return rc; | |
| rollback: | |
| for (pfn = start_pfn; pfn < end_pfn; pfn += PAGES_PER_SECTION) { | |
| page = pfn_to_online_page(pfn); | |
| if (!page) | |
| continue; | |
| virtio_mem_fake_online(pfn, PAGES_PER_SECTION); | |
| } | |
| virtio_mem_bbm_set_bb_state(vm, bb_id, VIRTIO_MEM_BBM_BB_ADDED); | |
| mutex_unlock(&vm->hotplug_mutex); | |
| return rc; | |
| } | |
| /* | |
| * Test if a big block is completely offline. | |
| */ | |
| static bool virtio_mem_bbm_bb_is_offline(struct virtio_mem *vm, | |
| unsigned long bb_id) | |
| { | |
| const unsigned long start_pfn = PFN_DOWN(virtio_mem_bb_id_to_phys(vm, bb_id)); | |
| const unsigned long nr_pages = PFN_DOWN(vm->bbm.bb_size); | |
| unsigned long pfn; | |
| for (pfn = start_pfn; pfn < start_pfn + nr_pages; | |
| pfn += PAGES_PER_SECTION) { | |
| if (pfn_to_online_page(pfn)) | |
| return false; | |
| } | |
| return true; | |
| } | |
| /* | |
| * Test if a big block is completely onlined to ZONE_MOVABLE (or offline). | |
| */ | |
| static bool virtio_mem_bbm_bb_is_movable(struct virtio_mem *vm, | |
| unsigned long bb_id) | |
| { | |
| const unsigned long start_pfn = PFN_DOWN(virtio_mem_bb_id_to_phys(vm, bb_id)); | |
| const unsigned long nr_pages = PFN_DOWN(vm->bbm.bb_size); | |
| struct page *page; | |
| unsigned long pfn; | |
| for (pfn = start_pfn; pfn < start_pfn + nr_pages; | |
| pfn += PAGES_PER_SECTION) { | |
| page = pfn_to_online_page(pfn); | |
| if (!page) | |
| continue; | |
| if (page_zonenum(page) != ZONE_MOVABLE) | |
| return false; | |
| } | |
| return true; | |
| } | |
| static int virtio_mem_bbm_unplug_request(struct virtio_mem *vm, uint64_t diff) | |
| { | |
| uint64_t nb_bb = diff / vm->bbm.bb_size; | |
| uint64_t bb_id; | |
| int rc, i; | |
| if (!nb_bb) | |
| return 0; | |
| /* | |
| * Try to unplug big blocks. Similar to SBM, start with offline | |
| * big blocks. | |
| */ | |
| for (i = 0; i < 3; i++) { | |
| virtio_mem_bbm_for_each_bb_rev(vm, bb_id, VIRTIO_MEM_BBM_BB_ADDED) { | |
| cond_resched(); | |
| /* | |
| * As we're holding no locks, these checks are racy, | |
| * but we don't care. | |
| */ | |
| if (i == 0 && !virtio_mem_bbm_bb_is_offline(vm, bb_id)) | |
| continue; | |
| if (i == 1 && !virtio_mem_bbm_bb_is_movable(vm, bb_id)) | |
| continue; | |
| rc = virtio_mem_bbm_offline_remove_and_unplug_bb(vm, bb_id); | |
| if (rc == -EBUSY) | |
| continue; | |
| if (!rc) | |
| nb_bb--; | |
| if (rc || !nb_bb) | |
| return rc; | |
| } | |
| if (i == 0 && !unplug_online) | |
| return 0; | |
| } | |
| return nb_bb ? -EBUSY : 0; | |
| } | |
| /* | |
| * Try to unplug the requested amount of memory. | |
| */ | |
| static int virtio_mem_unplug_request(struct virtio_mem *vm, uint64_t diff) | |
| { | |
| if (vm->in_sbm) | |
| return virtio_mem_sbm_unplug_request(vm, diff); | |
| return virtio_mem_bbm_unplug_request(vm, diff); | |
| } | |
| /* | |
| * Try to unplug all blocks that couldn't be unplugged before, for example, | |
| * because the hypervisor was busy. Further, offline and remove any memory | |
| * blocks where we previously failed. | |
| */ | |
| static int virtio_mem_cleanup_pending_mb(struct virtio_mem *vm) | |
| { | |
| unsigned long id; | |
| int rc = 0; | |
| if (!vm->in_sbm) { | |
| virtio_mem_bbm_for_each_bb(vm, id, | |
| VIRTIO_MEM_BBM_BB_PLUGGED) { | |
| rc = virtio_mem_bbm_unplug_bb(vm, id); | |
| if (rc) | |
| return rc; | |
| virtio_mem_bbm_set_bb_state(vm, id, | |
| VIRTIO_MEM_BBM_BB_UNUSED); | |
| } | |
| return 0; | |
| } | |
| virtio_mem_sbm_for_each_mb(vm, id, VIRTIO_MEM_SBM_MB_PLUGGED) { | |
| rc = virtio_mem_sbm_unplug_mb(vm, id); | |
| if (rc) | |
| return rc; | |
| virtio_mem_sbm_set_mb_state(vm, id, | |
| VIRTIO_MEM_SBM_MB_UNUSED); | |
| } | |
| if (!vm->sbm.have_unplugged_mb) | |
| return 0; | |
| /* | |
| * Let's retry (offlining and) removing completely unplugged Linux | |
| * memory blocks. | |
| */ | |
| vm->sbm.have_unplugged_mb = false; | |
| mutex_lock(&vm->hotplug_mutex); | |
| virtio_mem_sbm_for_each_mb(vm, id, VIRTIO_MEM_SBM_MB_MOVABLE_PARTIAL) | |
| rc |= virtio_mem_sbm_try_remove_unplugged_mb(vm, id); | |
| virtio_mem_sbm_for_each_mb(vm, id, VIRTIO_MEM_SBM_MB_KERNEL_PARTIAL) | |
| rc |= virtio_mem_sbm_try_remove_unplugged_mb(vm, id); | |
| virtio_mem_sbm_for_each_mb(vm, id, VIRTIO_MEM_SBM_MB_OFFLINE_PARTIAL) | |
| rc |= virtio_mem_sbm_try_remove_unplugged_mb(vm, id); | |
| mutex_unlock(&vm->hotplug_mutex); | |
| if (rc) | |
| vm->sbm.have_unplugged_mb = true; | |
| /* Ignore errors, this is not critical. We'll retry later. */ | |
| return 0; | |
| } | |
| /* | |
| * Update all parts of the config that could have changed. | |
| */ | |
| static void virtio_mem_refresh_config(struct virtio_mem *vm) | |
| { | |
| const struct range pluggable_range = mhp_get_pluggable_range(true); | |
| uint64_t new_plugged_size, end_addr; | |
| /* the plugged_size is just a reflection of what _we_ did previously */ | |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, plugged_size, | |
| &new_plugged_size); | |
| if (WARN_ON_ONCE(new_plugged_size != vm->plugged_size)) | |
| vm->plugged_size = new_plugged_size; | |
| /* calculate the last usable memory block id */ | |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, | |
| usable_region_size, &vm->usable_region_size); | |
| end_addr = min(vm->addr + vm->usable_region_size - 1, | |
| pluggable_range.end); | |
| if (vm->in_sbm) { | |
| vm->sbm.last_usable_mb_id = virtio_mem_phys_to_mb_id(end_addr); | |
| if (!IS_ALIGNED(end_addr + 1, memory_block_size_bytes())) | |
| vm->sbm.last_usable_mb_id--; | |
| } else { | |
| vm->bbm.last_usable_bb_id = virtio_mem_phys_to_bb_id(vm, | |
| end_addr); | |
| if (!IS_ALIGNED(end_addr + 1, vm->bbm.bb_size)) | |
| vm->bbm.last_usable_bb_id--; | |
| } | |
| /* | |
| * If we cannot plug any of our device memory (e.g., nothing in the | |
| * usable region is addressable), the last usable memory block id will | |
| * be smaller than the first usable memory block id. We'll stop | |
| * attempting to add memory with -ENOSPC from our main loop. | |
| */ | |
| /* see if there is a request to change the size */ | |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, requested_size, | |
| &vm->requested_size); | |
| dev_info(&vm->vdev->dev, "plugged size: 0x%llx", vm->plugged_size); | |
| dev_info(&vm->vdev->dev, "requested size: 0x%llx", vm->requested_size); | |
| } | |
| /* | |
| * Workqueue function for handling plug/unplug requests and config updates. | |
| */ | |
| static void virtio_mem_run_wq(struct work_struct *work) | |
| { | |
| struct virtio_mem *vm = container_of(work, struct virtio_mem, wq); | |
| uint64_t diff; | |
| int rc; | |
| if (unlikely(vm->in_kdump)) { | |
| dev_warn_once(&vm->vdev->dev, | |
| "unexpected workqueue run in kdump kernel\n"); | |
| return; | |
| } | |
| hrtimer_cancel(&vm->retry_timer); | |
| if (vm->broken) | |
| return; | |
| atomic_set(&vm->wq_active, 1); | |
| retry: | |
| rc = 0; | |
| /* Make sure we start with a clean state if there are leftovers. */ | |
| if (unlikely(vm->unplug_all_required)) | |
| rc = virtio_mem_send_unplug_all_request(vm); | |
| if (atomic_read(&vm->config_changed)) { | |
| atomic_set(&vm->config_changed, 0); | |
| virtio_mem_refresh_config(vm); | |
| } | |
| /* Cleanup any leftovers from previous runs */ | |
| if (!rc) | |
| rc = virtio_mem_cleanup_pending_mb(vm); | |
| if (!rc && vm->requested_size != vm->plugged_size) { | |
| if (vm->requested_size > vm->plugged_size) { | |
| diff = vm->requested_size - vm->plugged_size; | |
| rc = virtio_mem_plug_request(vm, diff); | |
| } else { | |
| diff = vm->plugged_size - vm->requested_size; | |
| rc = virtio_mem_unplug_request(vm, diff); | |
| } | |
| } | |
| /* | |
| * Keep retrying to offline and remove completely unplugged Linux | |
| * memory blocks. | |
| */ | |
| if (!rc && vm->in_sbm && vm->sbm.have_unplugged_mb) | |
| rc = -EBUSY; | |
| switch (rc) { | |
| case 0: | |
| vm->retry_timer_ms = VIRTIO_MEM_RETRY_TIMER_MIN_MS; | |
| break; | |
| case -ENOSPC: | |
| /* | |
| * We cannot add any more memory (alignment, physical limit) | |
| * or we have too many offline memory blocks. | |
| */ | |
| break; | |
| case -ETXTBSY: | |
| /* | |
| * The hypervisor cannot process our request right now | |
| * (e.g., out of memory, migrating); | |
| */ | |
| case -EBUSY: | |
| /* | |
| * We cannot free up any memory to unplug it (all plugged memory | |
| * is busy). | |
| */ | |
| case -ENOMEM: | |
| /* Out of memory, try again later. */ | |
| hrtimer_start(&vm->retry_timer, ms_to_ktime(vm->retry_timer_ms), | |
| HRTIMER_MODE_REL); | |
| break; | |
| case -EAGAIN: | |
| /* Retry immediately (e.g., the config changed). */ | |
| goto retry; | |
| default: | |
| /* Unknown error, mark as broken */ | |
| dev_err(&vm->vdev->dev, | |
| "unknown error, marking device broken: %d\n", rc); | |
| vm->broken = true; | |
| } | |
| atomic_set(&vm->wq_active, 0); | |
| } | |
| static enum hrtimer_restart virtio_mem_timer_expired(struct hrtimer *timer) | |
| { | |
| struct virtio_mem *vm = container_of(timer, struct virtio_mem, | |
| retry_timer); | |
| virtio_mem_retry(vm); | |
| vm->retry_timer_ms = min_t(unsigned int, vm->retry_timer_ms * 2, | |
| VIRTIO_MEM_RETRY_TIMER_MAX_MS); | |
| return HRTIMER_NORESTART; | |
| } | |
| static void virtio_mem_handle_response(struct virtqueue *vq) | |
| { | |
| struct virtio_mem *vm = vq->vdev->priv; | |
| wake_up(&vm->host_resp); | |
| } | |
| static int virtio_mem_init_vq(struct virtio_mem *vm) | |
| { | |
| struct virtqueue *vq; | |
| vq = virtio_find_single_vq(vm->vdev, virtio_mem_handle_response, | |
| "guest-request"); | |
| if (IS_ERR(vq)) | |
| return PTR_ERR(vq); | |
| vm->vq = vq; | |
| return 0; | |
| } | |
| static int virtio_mem_init_hotplug(struct virtio_mem *vm) | |
| { | |
| const struct range pluggable_range = mhp_get_pluggable_range(true); | |
| uint64_t unit_pages, sb_size, addr; | |
| int rc; | |
| /* bad device setup - warn only */ | |
| if (!IS_ALIGNED(vm->addr, memory_block_size_bytes())) | |
| dev_warn(&vm->vdev->dev, | |
| "The alignment of the physical start address can make some memory unusable.\n"); | |
| if (!IS_ALIGNED(vm->addr + vm->region_size, memory_block_size_bytes())) | |
| dev_warn(&vm->vdev->dev, | |
| "The alignment of the physical end address can make some memory unusable.\n"); | |
| if (vm->addr < pluggable_range.start || | |
| vm->addr + vm->region_size - 1 > pluggable_range.end) | |
| dev_warn(&vm->vdev->dev, | |
| "Some device memory is not addressable/pluggable. This can make some memory unusable.\n"); | |
| /* Prepare the offline threshold - make sure we can add two blocks. */ | |
| vm->offline_threshold = max_t(uint64_t, 2 * memory_block_size_bytes(), | |
| VIRTIO_MEM_DEFAULT_OFFLINE_THRESHOLD); | |
| /* | |
| * alloc_contig_range() works reliably with pageblock | |
| * granularity on ZONE_NORMAL, use pageblock_nr_pages. | |
| */ | |
| sb_size = PAGE_SIZE * pageblock_nr_pages; | |
| sb_size = max_t(uint64_t, vm->device_block_size, sb_size); | |
| if (sb_size < memory_block_size_bytes() && !force_bbm) { | |
| /* SBM: At least two subblocks per Linux memory block. */ | |
| vm->in_sbm = true; | |
| vm->sbm.sb_size = sb_size; | |
| vm->sbm.sbs_per_mb = memory_block_size_bytes() / | |
| vm->sbm.sb_size; | |
| /* Round up to the next full memory block */ | |
| addr = max_t(uint64_t, vm->addr, pluggable_range.start) + | |
| memory_block_size_bytes() - 1; | |
| vm->sbm.first_mb_id = virtio_mem_phys_to_mb_id(addr); | |
| vm->sbm.next_mb_id = vm->sbm.first_mb_id; | |
| } else { | |
| /* BBM: At least one Linux memory block. */ | |
| vm->bbm.bb_size = max_t(uint64_t, vm->device_block_size, | |
| memory_block_size_bytes()); | |
| if (bbm_block_size) { | |
| if (!is_power_of_2(bbm_block_size)) { | |
| dev_warn(&vm->vdev->dev, | |
| "bbm_block_size is not a power of 2"); | |
| } else if (bbm_block_size < vm->bbm.bb_size) { | |
| dev_warn(&vm->vdev->dev, | |
| "bbm_block_size is too small"); | |
| } else { | |
| vm->bbm.bb_size = bbm_block_size; | |
| } | |
| } | |
| /* Round up to the next aligned big block */ | |
| addr = max_t(uint64_t, vm->addr, pluggable_range.start) + | |
| vm->bbm.bb_size - 1; | |
| vm->bbm.first_bb_id = virtio_mem_phys_to_bb_id(vm, addr); | |
| vm->bbm.next_bb_id = vm->bbm.first_bb_id; | |
| /* Make sure we can add two big blocks. */ | |
| vm->offline_threshold = max_t(uint64_t, 2 * vm->bbm.bb_size, | |
| vm->offline_threshold); | |
| } | |
| dev_info(&vm->vdev->dev, "memory block size: 0x%lx", | |
| memory_block_size_bytes()); | |
| if (vm->in_sbm) | |
| dev_info(&vm->vdev->dev, "subblock size: 0x%llx", | |
| (unsigned long long)vm->sbm.sb_size); | |
| else | |
| dev_info(&vm->vdev->dev, "big block size: 0x%llx", | |
| (unsigned long long)vm->bbm.bb_size); | |
| /* create the parent resource for all memory */ | |
| rc = virtio_mem_create_resource(vm); | |
| if (rc) | |
| return rc; | |
| /* use a single dynamic memory group to cover the whole memory device */ | |
| if (vm->in_sbm) | |
| unit_pages = PHYS_PFN(memory_block_size_bytes()); | |
| else | |
| unit_pages = PHYS_PFN(vm->bbm.bb_size); | |
| rc = memory_group_register_dynamic(vm->nid, unit_pages); | |
| if (rc < 0) | |
| goto out_del_resource; | |
| vm->mgid = rc; | |
| /* | |
| * If we still have memory plugged, we have to unplug all memory first. | |
| * Registering our parent resource makes sure that this memory isn't | |
| * actually in use (e.g., trying to reload the driver). | |
| */ | |
| if (vm->plugged_size) { | |
| vm->unplug_all_required = true; | |
| dev_info(&vm->vdev->dev, "unplugging all memory is required\n"); | |
| } | |
| /* register callbacks */ | |
| vm->memory_notifier.notifier_call = virtio_mem_memory_notifier_cb; | |
| rc = register_memory_notifier(&vm->memory_notifier); | |
| if (rc) | |
| goto out_unreg_group; | |
| /* Block hibernation as early as possible. */ | |
| vm->pm_notifier.priority = INT_MAX; | |
| vm->pm_notifier.notifier_call = virtio_mem_pm_notifier_cb; | |
| rc = register_pm_notifier(&vm->pm_notifier); | |
| if (rc) | |
| goto out_unreg_mem; | |
| rc = register_virtio_mem_device(vm); | |
| if (rc) | |
| goto out_unreg_pm; | |
| virtio_device_ready(vm->vdev); | |
| return 0; | |
| out_unreg_pm: | |
| unregister_pm_notifier(&vm->pm_notifier); | |
| out_unreg_mem: | |
| unregister_memory_notifier(&vm->memory_notifier); | |
| out_unreg_group: | |
| memory_group_unregister(vm->mgid); | |
| out_del_resource: | |
| virtio_mem_delete_resource(vm); | |
| return rc; | |
| } | |
| #ifdef CONFIG_PROC_VMCORE | |
| static int virtio_mem_send_state_request(struct virtio_mem *vm, uint64_t addr, | |
| uint64_t size) | |
| { | |
| const uint64_t nb_vm_blocks = size / vm->device_block_size; | |
| const struct virtio_mem_req req = { | |
| .type = cpu_to_virtio16(vm->vdev, VIRTIO_MEM_REQ_STATE), | |
| .u.state.addr = cpu_to_virtio64(vm->vdev, addr), | |
| .u.state.nb_blocks = cpu_to_virtio16(vm->vdev, nb_vm_blocks), | |
| }; | |
| int rc = -ENOMEM; | |
| dev_dbg(&vm->vdev->dev, "requesting state: 0x%llx - 0x%llx\n", addr, | |
| addr + size - 1); | |
| switch (virtio_mem_send_request(vm, &req)) { | |
| case VIRTIO_MEM_RESP_ACK: | |
| return virtio16_to_cpu(vm->vdev, vm->resp.u.state.state); | |
| case VIRTIO_MEM_RESP_ERROR: | |
| rc = -EINVAL; | |
| break; | |
| default: | |
| break; | |
| } | |
| dev_dbg(&vm->vdev->dev, "requesting state failed: %d\n", rc); | |
| return rc; | |
| } | |
| static bool virtio_mem_vmcore_pfn_is_ram(struct vmcore_cb *cb, | |
| unsigned long pfn) | |
| { | |
| struct virtio_mem *vm = container_of(cb, struct virtio_mem, | |
| vmcore_cb); | |
| uint64_t addr = PFN_PHYS(pfn); | |
| bool is_ram; | |
| int rc; | |
| if (!virtio_mem_contains_range(vm, addr, PAGE_SIZE)) | |
| return true; | |
| if (!vm->plugged_size) | |
| return false; | |
| /* | |
| * We have to serialize device requests and access to the information | |
| * about the block queried last. | |
| */ | |
| mutex_lock(&vm->hotplug_mutex); | |
| addr = ALIGN_DOWN(addr, vm->device_block_size); | |
| if (addr != vm->last_block_addr) { | |
| rc = virtio_mem_send_state_request(vm, addr, | |
| vm->device_block_size); | |
| /* On any kind of error, we're going to signal !ram. */ | |
| if (rc == VIRTIO_MEM_STATE_PLUGGED) | |
| vm->last_block_plugged = true; | |
| else | |
| vm->last_block_plugged = false; | |
| vm->last_block_addr = addr; | |
| } | |
| is_ram = vm->last_block_plugged; | |
| mutex_unlock(&vm->hotplug_mutex); | |
| return is_ram; | |
| } | |
| #ifdef CONFIG_PROC_VMCORE_DEVICE_RAM | |
| static int virtio_mem_vmcore_add_device_ram(struct virtio_mem *vm, | |
| struct list_head *list, uint64_t start, uint64_t end) | |
| { | |
| int rc; | |
| rc = vmcore_alloc_add_range(list, start, end - start); | |
| if (rc) | |
| dev_err(&vm->vdev->dev, | |
| "Error adding device RAM range: %d\n", rc); | |
| return rc; | |
| } | |
| static int virtio_mem_vmcore_get_device_ram(struct vmcore_cb *cb, | |
| struct list_head *list) | |
| { | |
| struct virtio_mem *vm = container_of(cb, struct virtio_mem, | |
| vmcore_cb); | |
| const uint64_t device_start = vm->addr; | |
| const uint64_t device_end = vm->addr + vm->usable_region_size; | |
| uint64_t chunk_size, cur_start, cur_end, plugged_range_start = 0; | |
| LIST_HEAD(tmp_list); | |
| int rc; | |
| if (!vm->plugged_size) | |
| return 0; | |
| /* Process memory sections, unless the device block size is bigger. */ | |
| chunk_size = max_t(uint64_t, PFN_PHYS(PAGES_PER_SECTION), | |
| vm->device_block_size); | |
| mutex_lock(&vm->hotplug_mutex); | |
| /* | |
| * We process larger chunks and indicate the complete chunk if any | |
| * block in there is plugged. This reduces the number of pfn_is_ram() | |
| * callbacks and mimic what is effectively being done when the old | |
| * kernel would add complete memory sections/blocks to the elfcore hdr. | |
| */ | |
| cur_start = device_start; | |
| for (cur_start = device_start; cur_start < device_end; cur_start = cur_end) { | |
| cur_end = ALIGN_DOWN(cur_start + chunk_size, chunk_size); | |
| cur_end = min_t(uint64_t, cur_end, device_end); | |
| rc = virtio_mem_send_state_request(vm, cur_start, | |
| cur_end - cur_start); | |
| if (rc < 0) { | |
| dev_err(&vm->vdev->dev, | |
| "Error querying block states: %d\n", rc); | |
| goto out; | |
| } else if (rc != VIRTIO_MEM_STATE_UNPLUGGED) { | |
| /* Merge ranges with plugged memory. */ | |
| if (!plugged_range_start) | |
| plugged_range_start = cur_start; | |
| continue; | |
| } | |
| /* Flush any plugged range. */ | |
| if (plugged_range_start) { | |
| rc = virtio_mem_vmcore_add_device_ram(vm, &tmp_list, | |
| plugged_range_start, | |
| cur_start); | |
| if (rc) | |
| goto out; | |
| plugged_range_start = 0; | |
| } | |
| } | |
| /* Flush any plugged range. */ | |
| if (plugged_range_start) | |
| rc = virtio_mem_vmcore_add_device_ram(vm, &tmp_list, | |
| plugged_range_start, | |
| cur_start); | |
| out: | |
| mutex_unlock(&vm->hotplug_mutex); | |
| if (rc < 0) { | |
| vmcore_free_ranges(&tmp_list); | |
| return rc; | |
| } | |
| list_splice_tail(&tmp_list, list); | |
| return 0; | |
| } | |
| #endif /* CONFIG_PROC_VMCORE_DEVICE_RAM */ | |
| #endif /* CONFIG_PROC_VMCORE */ | |
| static int virtio_mem_init_kdump(struct virtio_mem *vm) | |
| { | |
| /* We must be prepared to receive a callback immediately. */ | |
| virtio_device_ready(vm->vdev); | |
| #ifdef CONFIG_PROC_VMCORE | |
| dev_info(&vm->vdev->dev, "memory hot(un)plug disabled in kdump kernel\n"); | |
| vm->vmcore_cb.pfn_is_ram = virtio_mem_vmcore_pfn_is_ram; | |
| #ifdef CONFIG_PROC_VMCORE_DEVICE_RAM | |
| vm->vmcore_cb.get_device_ram = virtio_mem_vmcore_get_device_ram; | |
| #endif /* CONFIG_PROC_VMCORE_DEVICE_RAM */ | |
| register_vmcore_cb(&vm->vmcore_cb); | |
| return 0; | |
| #else /* CONFIG_PROC_VMCORE */ | |
| dev_warn(&vm->vdev->dev, "disabled in kdump kernel without vmcore\n"); | |
| return -EBUSY; | |
| #endif /* CONFIG_PROC_VMCORE */ | |
| } | |
| static int virtio_mem_init(struct virtio_mem *vm) | |
| { | |
| uint16_t node_id; | |
| if (!vm->vdev->config->get) { | |
| dev_err(&vm->vdev->dev, "config access disabled\n"); | |
| return -EINVAL; | |
| } | |
| /* Fetch all properties that can't change. */ | |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, plugged_size, | |
| &vm->plugged_size); | |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, block_size, | |
| &vm->device_block_size); | |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, node_id, | |
| &node_id); | |
| vm->nid = virtio_mem_translate_node_id(vm, node_id); | |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, addr, &vm->addr); | |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, region_size, | |
| &vm->region_size); | |
| virtio_cread_le(vm->vdev, struct virtio_mem_config, usable_region_size, | |
| &vm->usable_region_size); | |
| /* Determine the nid for the device based on the lowest address. */ | |
| if (vm->nid == NUMA_NO_NODE) | |
| vm->nid = memory_add_physaddr_to_nid(vm->addr); | |
| dev_info(&vm->vdev->dev, "start address: 0x%llx", vm->addr); | |
| dev_info(&vm->vdev->dev, "region size: 0x%llx", vm->region_size); | |
| dev_info(&vm->vdev->dev, "device block size: 0x%llx", | |
| (unsigned long long)vm->device_block_size); | |
| if (vm->nid != NUMA_NO_NODE && IS_ENABLED(CONFIG_NUMA)) | |
| dev_info(&vm->vdev->dev, "nid: %d", vm->nid); | |
| /* | |
| * We don't want to (un)plug or reuse any memory when in kdump. The | |
| * memory is still accessible (but not exposed to Linux). | |
| */ | |
| if (vm->in_kdump) | |
| return virtio_mem_init_kdump(vm); | |
| return virtio_mem_init_hotplug(vm); | |
| } | |
| static int virtio_mem_create_resource(struct virtio_mem *vm) | |
| { | |
| /* | |
| * When force-unloading the driver and removing the device, we | |
| * could have a garbage pointer. Duplicate the string. | |
| */ | |
| const char *name = kstrdup(dev_name(&vm->vdev->dev), GFP_KERNEL); | |
| if (!name) | |
| return -ENOMEM; | |
| /* Disallow mapping device memory via /dev/mem completely. */ | |
| vm->parent_resource = __request_mem_region(vm->addr, vm->region_size, | |
| name, IORESOURCE_SYSTEM_RAM | | |
| IORESOURCE_EXCLUSIVE); | |
| if (!vm->parent_resource) { | |
| kfree(name); | |
| dev_warn(&vm->vdev->dev, "could not reserve device region\n"); | |
| dev_info(&vm->vdev->dev, | |
| "reloading the driver is not supported\n"); | |
| return -EBUSY; | |
| } | |
| /* The memory is not actually busy - make add_memory() work. */ | |
| vm->parent_resource->flags &= ~IORESOURCE_BUSY; | |
| return 0; | |
| } | |
| static void virtio_mem_delete_resource(struct virtio_mem *vm) | |
| { | |
| const char *name; | |
| if (!vm->parent_resource) | |
| return; | |
| name = vm->parent_resource->name; | |
| release_resource(vm->parent_resource); | |
| kfree(vm->parent_resource); | |
| kfree(name); | |
| vm->parent_resource = NULL; | |
| } | |
| static int virtio_mem_range_has_system_ram(struct resource *res, void *arg) | |
| { | |
| return 1; | |
| } | |
| static bool virtio_mem_has_memory_added(struct virtio_mem *vm) | |
| { | |
| const unsigned long flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; | |
| return walk_iomem_res_desc(IORES_DESC_NONE, flags, vm->addr, | |
| vm->addr + vm->region_size, NULL, | |
| virtio_mem_range_has_system_ram) == 1; | |
| } | |
| static int virtio_mem_probe(struct virtio_device *vdev) | |
| { | |
| struct virtio_mem *vm; | |
| int rc; | |
| BUILD_BUG_ON(sizeof(struct virtio_mem_req) != 24); | |
| BUILD_BUG_ON(sizeof(struct virtio_mem_resp) != 10); | |
| vdev->priv = vm = kzalloc_obj(*vm); | |
| if (!vm) | |
| return -ENOMEM; | |
| init_waitqueue_head(&vm->host_resp); | |
| vm->vdev = vdev; | |
| INIT_WORK(&vm->wq, virtio_mem_run_wq); | |
| mutex_init(&vm->hotplug_mutex); | |
| INIT_LIST_HEAD(&vm->next); | |
| spin_lock_init(&vm->removal_lock); | |
| hrtimer_setup(&vm->retry_timer, virtio_mem_timer_expired, CLOCK_MONOTONIC, | |
| HRTIMER_MODE_REL); | |
| vm->retry_timer_ms = VIRTIO_MEM_RETRY_TIMER_MIN_MS; | |
| vm->in_kdump = is_kdump_kernel(); | |
| /* register the virtqueue */ | |
| rc = virtio_mem_init_vq(vm); | |
| if (rc) | |
| goto out_free_vm; | |
| /* initialize the device by querying the config */ | |
| rc = virtio_mem_init(vm); | |
| if (rc) | |
| goto out_del_vq; | |
| /* trigger a config update to start processing the requested_size */ | |
| if (!vm->in_kdump) { | |
| atomic_set(&vm->config_changed, 1); | |
| queue_work(system_freezable_wq, &vm->wq); | |
| } | |
| return 0; | |
| out_del_vq: | |
| vdev->config->del_vqs(vdev); | |
| out_free_vm: | |
| mutex_destroy(&vm->hotplug_mutex); | |
| kfree(vm); | |
| vdev->priv = NULL; | |
| return rc; | |
| } | |
| static void virtio_mem_deinit_hotplug(struct virtio_mem *vm) | |
| { | |
| unsigned long mb_id; | |
| int rc; | |
| /* | |
| * Make sure the workqueue won't be triggered anymore and no memory | |
| * blocks can be onlined/offlined until we're finished here. | |
| */ | |
| mutex_lock(&vm->hotplug_mutex); | |
| spin_lock_irq(&vm->removal_lock); | |
| vm->removing = true; | |
| spin_unlock_irq(&vm->removal_lock); | |
| mutex_unlock(&vm->hotplug_mutex); | |
| /* wait until the workqueue stopped */ | |
| cancel_work_sync(&vm->wq); | |
| hrtimer_cancel(&vm->retry_timer); | |
| if (vm->in_sbm) { | |
| /* | |
| * After we unregistered our callbacks, user space can online | |
| * partially plugged offline blocks. Make sure to remove them. | |
| */ | |
| virtio_mem_sbm_for_each_mb(vm, mb_id, | |
| VIRTIO_MEM_SBM_MB_OFFLINE_PARTIAL) { | |
| rc = virtio_mem_sbm_remove_mb(vm, mb_id); | |
| BUG_ON(rc); | |
| virtio_mem_sbm_set_mb_state(vm, mb_id, | |
| VIRTIO_MEM_SBM_MB_UNUSED); | |
| } | |
| /* | |
| * After we unregistered our callbacks, user space can no longer | |
| * offline partially plugged online memory blocks. No need to | |
| * worry about them. | |
| */ | |
| } | |
| /* unregister callbacks */ | |
| unregister_virtio_mem_device(vm); | |
| unregister_pm_notifier(&vm->pm_notifier); | |
| unregister_memory_notifier(&vm->memory_notifier); | |
| /* | |
| * There is no way we could reliably remove all memory we have added to | |
| * the system. And there is no way to stop the driver/device from going | |
| * away. Warn at least. | |
| */ | |
| if (virtio_mem_has_memory_added(vm)) { | |
| dev_warn(&vm->vdev->dev, | |
| "device still has system memory added\n"); | |
| } else { | |
| virtio_mem_delete_resource(vm); | |
| kfree_const(vm->resource_name); | |
| memory_group_unregister(vm->mgid); | |
| } | |
| /* remove all tracking data - no locking needed */ | |
| if (vm->in_sbm) { | |
| vfree(vm->sbm.mb_states); | |
| vfree(vm->sbm.sb_states); | |
| } else { | |
| vfree(vm->bbm.bb_states); | |
| } | |
| } | |
| static void virtio_mem_deinit_kdump(struct virtio_mem *vm) | |
| { | |
| #ifdef CONFIG_PROC_VMCORE | |
| unregister_vmcore_cb(&vm->vmcore_cb); | |
| #endif /* CONFIG_PROC_VMCORE */ | |
| } | |
| static void virtio_mem_remove(struct virtio_device *vdev) | |
| { | |
| struct virtio_mem *vm = vdev->priv; | |
| if (vm->in_kdump) | |
| virtio_mem_deinit_kdump(vm); | |
| else | |
| virtio_mem_deinit_hotplug(vm); | |
| /* reset the device and cleanup the queues */ | |
| virtio_reset_device(vdev); | |
| vdev->config->del_vqs(vdev); | |
| mutex_destroy(&vm->hotplug_mutex); | |
| kfree(vm); | |
| vdev->priv = NULL; | |
| } | |
| static void virtio_mem_config_changed(struct virtio_device *vdev) | |
| { | |
| struct virtio_mem *vm = vdev->priv; | |
| if (unlikely(vm->in_kdump)) | |
| return; | |
| atomic_set(&vm->config_changed, 1); | |
| virtio_mem_retry(vm); | |
| } | |
| #ifdef CONFIG_PM_SLEEP | |
| static int virtio_mem_freeze(struct virtio_device *vdev) | |
| { | |
| struct virtio_mem *vm = vdev->priv; | |
| /* | |
| * We block hibernation using the PM notifier completely. The workqueue | |
| * is already frozen by the PM core at this point, so we simply | |
| * reset the device and cleanup the queues. | |
| */ | |
| if (pm_suspend_target_state != PM_SUSPEND_TO_IDLE && | |
| vm->plugged_size && | |
| !virtio_has_feature(vm->vdev, VIRTIO_MEM_F_PERSISTENT_SUSPEND)) { | |
| dev_err(&vm->vdev->dev, | |
| "suspending with plugged memory is not supported\n"); | |
| return -EPERM; | |
| } | |
| virtio_reset_device(vdev); | |
| vdev->config->del_vqs(vdev); | |
| vm->vq = NULL; | |
| return 0; | |
| } | |
| static int virtio_mem_restore(struct virtio_device *vdev) | |
| { | |
| struct virtio_mem *vm = vdev->priv; | |
| int ret; | |
| ret = virtio_mem_init_vq(vm); | |
| if (ret) | |
| return ret; | |
| virtio_device_ready(vdev); | |
| /* Let's check if anything changed. */ | |
| virtio_mem_config_changed(vdev); | |
| return 0; | |
| } | |
| #endif | |
| static unsigned int virtio_mem_features[] = { | |
| #if defined(CONFIG_NUMA) && defined(CONFIG_ACPI_NUMA) | |
| VIRTIO_MEM_F_ACPI_PXM, | |
| #endif | |
| VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE, | |
| VIRTIO_MEM_F_PERSISTENT_SUSPEND, | |
| }; | |
| static const struct virtio_device_id virtio_mem_id_table[] = { | |
| { VIRTIO_ID_MEM, VIRTIO_DEV_ANY_ID }, | |
| { 0 }, | |
| }; | |
| static struct virtio_driver virtio_mem_driver = { | |
| .feature_table = virtio_mem_features, | |
| .feature_table_size = ARRAY_SIZE(virtio_mem_features), | |
| .driver.name = KBUILD_MODNAME, | |
| .id_table = virtio_mem_id_table, | |
| .probe = virtio_mem_probe, | |
| .remove = virtio_mem_remove, | |
| .config_changed = virtio_mem_config_changed, | |
| #ifdef CONFIG_PM_SLEEP | |
| .freeze = virtio_mem_freeze, | |
| .restore = virtio_mem_restore, | |
| #endif | |
| }; | |
| module_virtio_driver(virtio_mem_driver); | |
| MODULE_DEVICE_TABLE(virtio, virtio_mem_id_table); | |
| MODULE_AUTHOR("David Hildenbrand <david@redhat.com>"); | |
| MODULE_DESCRIPTION("Virtio-mem driver"); | |
| MODULE_LICENSE("GPL"); |