| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * lms283gf05.c -- support for Samsung LMS283GF05 LCD | |
| * | |
| * Copyright (c) 2009 Marek Vasut <marek.vasut@gmail.com> | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/kernel.h> | |
| #include <linux/delay.h> | |
| #include <linux/slab.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/lcd.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/module.h> | |
| struct lms283gf05_state { | |
| struct spi_device *spi; | |
| struct lcd_device *ld; | |
| struct gpio_desc *reset; | |
| }; | |
| struct lms283gf05_seq { | |
| unsigned char reg; | |
| unsigned short value; | |
| unsigned char delay; | |
| }; | |
| /* Magic sequences supplied by manufacturer, for details refer to datasheet */ | |
| static const struct lms283gf05_seq disp_initseq[] = { | |
| /* REG, VALUE, DELAY */ | |
| { 0x07, 0x0000, 0 }, | |
| { 0x13, 0x0000, 10 }, | |
| { 0x11, 0x3004, 0 }, | |
| { 0x14, 0x200F, 0 }, | |
| { 0x10, 0x1a20, 0 }, | |
| { 0x13, 0x0040, 50 }, | |
| { 0x13, 0x0060, 0 }, | |
| { 0x13, 0x0070, 200 }, | |
| { 0x01, 0x0127, 0 }, | |
| { 0x02, 0x0700, 0 }, | |
| { 0x03, 0x1030, 0 }, | |
| { 0x08, 0x0208, 0 }, | |
| { 0x0B, 0x0620, 0 }, | |
| { 0x0C, 0x0110, 0 }, | |
| { 0x30, 0x0120, 0 }, | |
| { 0x31, 0x0127, 0 }, | |
| { 0x32, 0x0000, 0 }, | |
| { 0x33, 0x0503, 0 }, | |
| { 0x34, 0x0727, 0 }, | |
| { 0x35, 0x0124, 0 }, | |
| { 0x36, 0x0706, 0 }, | |
| { 0x37, 0x0701, 0 }, | |
| { 0x38, 0x0F00, 0 }, | |
| { 0x39, 0x0F00, 0 }, | |
| { 0x40, 0x0000, 0 }, | |
| { 0x41, 0x0000, 0 }, | |
| { 0x42, 0x013f, 0 }, | |
| { 0x43, 0x0000, 0 }, | |
| { 0x44, 0x013f, 0 }, | |
| { 0x45, 0x0000, 0 }, | |
| { 0x46, 0xef00, 0 }, | |
| { 0x47, 0x013f, 0 }, | |
| { 0x48, 0x0000, 0 }, | |
| { 0x07, 0x0015, 30 }, | |
| { 0x07, 0x0017, 0 }, | |
| { 0x20, 0x0000, 0 }, | |
| { 0x21, 0x0000, 0 }, | |
| { 0x22, 0x0000, 0 } | |
| }; | |
| static const struct lms283gf05_seq disp_pdwnseq[] = { | |
| { 0x07, 0x0016, 30 }, | |
| { 0x07, 0x0004, 0 }, | |
| { 0x10, 0x0220, 20 }, | |
| { 0x13, 0x0060, 50 }, | |
| { 0x13, 0x0040, 50 }, | |
| { 0x13, 0x0000, 0 }, | |
| { 0x10, 0x0000, 0 } | |
| }; | |
| static void lms283gf05_reset(struct gpio_desc *gpiod) | |
| { | |
| gpiod_set_value(gpiod, 0); /* De-asserted */ | |
| mdelay(100); | |
| gpiod_set_value(gpiod, 1); /* Asserted */ | |
| mdelay(20); | |
| gpiod_set_value(gpiod, 0); /* De-asserted */ | |
| mdelay(20); | |
| } | |
| static void lms283gf05_toggle(struct spi_device *spi, | |
| const struct lms283gf05_seq *seq, int sz) | |
| { | |
| char buf[3]; | |
| int i; | |
| for (i = 0; i < sz; i++) { | |
| buf[0] = 0x74; | |
| buf[1] = 0x00; | |
| buf[2] = seq[i].reg; | |
| spi_write(spi, buf, 3); | |
| buf[0] = 0x76; | |
| buf[1] = seq[i].value >> 8; | |
| buf[2] = seq[i].value & 0xff; | |
| spi_write(spi, buf, 3); | |
| mdelay(seq[i].delay); | |
| } | |
| } | |
| static int lms283gf05_power_set(struct lcd_device *ld, int power) | |
| { | |
| struct lms283gf05_state *st = lcd_get_data(ld); | |
| struct spi_device *spi = st->spi; | |
| if (power <= LCD_POWER_REDUCED) { | |
| if (st->reset) | |
| lms283gf05_reset(st->reset); | |
| lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq)); | |
| } else { | |
| lms283gf05_toggle(spi, disp_pdwnseq, ARRAY_SIZE(disp_pdwnseq)); | |
| if (st->reset) | |
| gpiod_set_value(st->reset, 1); /* Asserted */ | |
| } | |
| return 0; | |
| } | |
| static const struct lcd_ops lms_ops = { | |
| .set_power = lms283gf05_power_set, | |
| .get_power = NULL, | |
| }; | |
| static int lms283gf05_probe(struct spi_device *spi) | |
| { | |
| struct lms283gf05_state *st; | |
| struct lcd_device *ld; | |
| st = devm_kzalloc(&spi->dev, sizeof(struct lms283gf05_state), | |
| GFP_KERNEL); | |
| if (st == NULL) | |
| return -ENOMEM; | |
| st->reset = gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_LOW); | |
| if (IS_ERR(st->reset)) | |
| return PTR_ERR(st->reset); | |
| gpiod_set_consumer_name(st->reset, "LMS283GF05 RESET"); | |
| ld = devm_lcd_device_register(&spi->dev, "lms283gf05", &spi->dev, st, | |
| &lms_ops); | |
| if (IS_ERR(ld)) | |
| return PTR_ERR(ld); | |
| st->spi = spi; | |
| st->ld = ld; | |
| spi_set_drvdata(spi, st); | |
| /* kick in the LCD */ | |
| if (st->reset) | |
| lms283gf05_reset(st->reset); | |
| lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq)); | |
| return 0; | |
| } | |
| static struct spi_driver lms283gf05_driver = { | |
| .driver = { | |
| .name = "lms283gf05", | |
| }, | |
| .probe = lms283gf05_probe, | |
| }; | |
| module_spi_driver(lms283gf05_driver); | |
| MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); | |
| MODULE_DESCRIPTION("LCD283GF05 LCD"); | |
| MODULE_LICENSE("GPL v2"); |