| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * Copyright (C) 2011 Marvell International Ltd. All rights reserved. | |
| * Author: Chao Xie <chao.xie@marvell.com> | |
| * Neil Zhang <zhangwm@marvell.com> | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/clk.h> | |
| #include <linux/err.h> | |
| #include <linux/usb/otg.h> | |
| #include <linux/usb/of.h> | |
| #include <linux/platform_data/mv_usb.h> | |
| #include <linux/io.h> | |
| #include <linux/usb/hcd.h> | |
| #include "ehci.h" | |
| /* registers */ | |
| #define U2x_CAPREGS_OFFSET 0x100 | |
| #define CAPLENGTH_MASK (0xff) | |
| #define hcd_to_ehci_hcd_mv(h) ((struct ehci_hcd_mv *)hcd_to_ehci(h)->priv) | |
| struct ehci_hcd_mv { | |
| /* Which mode does this ehci running OTG/Host ? */ | |
| int mode; | |
| void __iomem *base; | |
| void __iomem *cap_regs; | |
| void __iomem *op_regs; | |
| struct usb_phy *otg; | |
| struct clk *clk; | |
| struct phy *phy; | |
| int (*set_vbus)(unsigned int vbus); | |
| }; | |
| static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv) | |
| { | |
| int retval; | |
| retval = clk_prepare_enable(ehci_mv->clk); | |
| if (retval) | |
| return retval; | |
| retval = phy_init(ehci_mv->phy); | |
| if (retval) | |
| clk_disable_unprepare(ehci_mv->clk); | |
| return retval; | |
| } | |
| static void mv_ehci_disable(struct ehci_hcd_mv *ehci_mv) | |
| { | |
| phy_exit(ehci_mv->phy); | |
| clk_disable_unprepare(ehci_mv->clk); | |
| } | |
| static int mv_ehci_reset(struct usb_hcd *hcd) | |
| { | |
| struct device *dev = hcd->self.controller; | |
| struct ehci_hcd_mv *ehci_mv = hcd_to_ehci_hcd_mv(hcd); | |
| struct ehci_hcd *ehci = hcd_to_ehci(hcd); | |
| u32 status; | |
| int retval; | |
| if (ehci_mv == NULL) { | |
| dev_err(dev, "Can not find private ehci data\n"); | |
| return -ENODEV; | |
| } | |
| hcd->has_tt = 1; | |
| retval = ehci_setup(hcd); | |
| if (retval) | |
| dev_err(dev, "ehci_setup failed %d\n", retval); | |
| if (of_usb_get_phy_mode(dev->of_node) == USBPHY_INTERFACE_MODE_HSIC) { | |
| status = ehci_readl(ehci, &ehci->regs->port_status[0]); | |
| status |= PORT_TEST_FORCE; | |
| ehci_writel(ehci, status, &ehci->regs->port_status[0]); | |
| status &= ~PORT_TEST_FORCE; | |
| ehci_writel(ehci, status, &ehci->regs->port_status[0]); | |
| } | |
| return retval; | |
| } | |
| static struct hc_driver __read_mostly ehci_platform_hc_driver; | |
| static const struct ehci_driver_overrides platform_overrides __initconst = { | |
| .reset = mv_ehci_reset, | |
| .extra_priv_size = sizeof(struct ehci_hcd_mv), | |
| }; | |
| static int mv_ehci_probe(struct platform_device *pdev) | |
| { | |
| struct mv_usb_platform_data *pdata = dev_get_platdata(&pdev->dev); | |
| struct usb_hcd *hcd; | |
| struct ehci_hcd *ehci; | |
| struct ehci_hcd_mv *ehci_mv; | |
| struct resource *r; | |
| int retval; | |
| u32 offset; | |
| u32 status; | |
| if (usb_disabled()) | |
| return -ENODEV; | |
| hcd = usb_create_hcd(&ehci_platform_hc_driver, &pdev->dev, dev_name(&pdev->dev)); | |
| if (!hcd) | |
| return -ENOMEM; | |
| platform_set_drvdata(pdev, hcd); | |
| ehci_mv = hcd_to_ehci_hcd_mv(hcd); | |
| ehci_mv->mode = MV_USB_MODE_HOST; | |
| if (pdata) { | |
| ehci_mv->mode = pdata->mode; | |
| ehci_mv->set_vbus = pdata->set_vbus; | |
| } | |
| ehci_mv->phy = devm_phy_optional_get(&pdev->dev, "usb"); | |
| if (IS_ERR(ehci_mv->phy)) { | |
| retval = PTR_ERR(ehci_mv->phy); | |
| if (retval != -EPROBE_DEFER) | |
| dev_err(&pdev->dev, "Failed to get phy.\n"); | |
| goto err_put_hcd; | |
| } | |
| ehci_mv->clk = devm_clk_get(&pdev->dev, NULL); | |
| if (IS_ERR(ehci_mv->clk)) { | |
| dev_err(&pdev->dev, "error getting clock\n"); | |
| retval = PTR_ERR(ehci_mv->clk); | |
| goto err_put_hcd; | |
| } | |
| ehci_mv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &r); | |
| if (IS_ERR(ehci_mv->base)) { | |
| retval = PTR_ERR(ehci_mv->base); | |
| goto err_put_hcd; | |
| } | |
| retval = mv_ehci_enable(ehci_mv); | |
| if (retval) { | |
| dev_err(&pdev->dev, "init phy error %d\n", retval); | |
| goto err_put_hcd; | |
| } | |
| ehci_mv->cap_regs = | |
| (void __iomem *) ((unsigned long) ehci_mv->base + U2x_CAPREGS_OFFSET); | |
| offset = readl(ehci_mv->cap_regs) & CAPLENGTH_MASK; | |
| ehci_mv->op_regs = | |
| (void __iomem *) ((unsigned long) ehci_mv->cap_regs + offset); | |
| hcd->rsrc_start = r->start; | |
| hcd->rsrc_len = resource_size(r); | |
| hcd->regs = ehci_mv->op_regs; | |
| retval = platform_get_irq(pdev, 0); | |
| if (retval < 0) | |
| goto err_disable_clk; | |
| hcd->irq = retval; | |
| ehci = hcd_to_ehci(hcd); | |
| ehci->caps = (struct ehci_caps __iomem *) ehci_mv->cap_regs; | |
| if (ehci_mv->mode == MV_USB_MODE_OTG) { | |
| ehci_mv->otg = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2); | |
| if (IS_ERR(ehci_mv->otg)) { | |
| retval = PTR_ERR(ehci_mv->otg); | |
| if (retval == -ENXIO) | |
| dev_info(&pdev->dev, "MV_USB_MODE_OTG " | |
| "must have CONFIG_USB_PHY enabled\n"); | |
| else | |
| dev_err(&pdev->dev, | |
| "unable to find transceiver\n"); | |
| goto err_disable_clk; | |
| } | |
| retval = otg_set_host(ehci_mv->otg->otg, &hcd->self); | |
| if (retval < 0) { | |
| dev_err(&pdev->dev, | |
| "unable to register with transceiver\n"); | |
| retval = -ENODEV; | |
| goto err_disable_clk; | |
| } | |
| /* otg will enable clock before use as host */ | |
| mv_ehci_disable(ehci_mv); | |
| } else { | |
| if (ehci_mv->set_vbus) | |
| ehci_mv->set_vbus(1); | |
| retval = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED); | |
| if (retval) { | |
| dev_err(&pdev->dev, | |
| "failed to add hcd with err %d\n", retval); | |
| goto err_set_vbus; | |
| } | |
| device_wakeup_enable(hcd->self.controller); | |
| } | |
| if (of_usb_get_phy_mode(pdev->dev.of_node) == USBPHY_INTERFACE_MODE_HSIC) { | |
| status = ehci_readl(ehci, &ehci->regs->port_status[0]); | |
| /* These "reserved" bits actually enable HSIC mode. */ | |
| status |= BIT(25); | |
| status &= ~GENMASK(31, 30); | |
| ehci_writel(ehci, status, &ehci->regs->port_status[0]); | |
| } | |
| dev_info(&pdev->dev, | |
| "successful find EHCI device with regs 0x%p irq %d" | |
| " working in %s mode\n", hcd->regs, hcd->irq, | |
| ehci_mv->mode == MV_USB_MODE_OTG ? "OTG" : "Host"); | |
| return 0; | |
| err_set_vbus: | |
| if (ehci_mv->set_vbus) | |
| ehci_mv->set_vbus(0); | |
| err_disable_clk: | |
| mv_ehci_disable(ehci_mv); | |
| err_put_hcd: | |
| usb_put_hcd(hcd); | |
| return retval; | |
| } | |
| static void mv_ehci_remove(struct platform_device *pdev) | |
| { | |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); | |
| struct ehci_hcd_mv *ehci_mv = hcd_to_ehci_hcd_mv(hcd); | |
| if (hcd->rh_registered) | |
| usb_remove_hcd(hcd); | |
| if (!IS_ERR_OR_NULL(ehci_mv->otg)) | |
| otg_set_host(ehci_mv->otg->otg, NULL); | |
| if (ehci_mv->mode == MV_USB_MODE_HOST) { | |
| if (ehci_mv->set_vbus) | |
| ehci_mv->set_vbus(0); | |
| mv_ehci_disable(ehci_mv); | |
| } | |
| usb_put_hcd(hcd); | |
| } | |
| static const struct platform_device_id ehci_id_table[] = { | |
| {"pxa-u2oehci", 0}, | |
| {"pxa-sph", 0}, | |
| {}, | |
| }; | |
| static void mv_ehci_shutdown(struct platform_device *pdev) | |
| { | |
| struct usb_hcd *hcd = platform_get_drvdata(pdev); | |
| if (!hcd->rh_registered) | |
| return; | |
| if (hcd->driver->shutdown) | |
| hcd->driver->shutdown(hcd); | |
| } | |
| static const struct of_device_id ehci_mv_dt_ids[] = { | |
| { .compatible = "marvell,pxau2o-ehci", }, | |
| {}, | |
| }; | |
| static struct platform_driver ehci_mv_driver = { | |
| .probe = mv_ehci_probe, | |
| .remove = mv_ehci_remove, | |
| .shutdown = mv_ehci_shutdown, | |
| .driver = { | |
| .name = "mv-ehci", | |
| .bus = &platform_bus_type, | |
| .of_match_table = ehci_mv_dt_ids, | |
| }, | |
| .id_table = ehci_id_table, | |
| }; | |
| static int __init ehci_platform_init(void) | |
| { | |
| if (usb_disabled()) | |
| return -ENODEV; | |
| ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides); | |
| return platform_driver_register(&ehci_mv_driver); | |
| } | |
| module_init(ehci_platform_init); | |
| static void __exit ehci_platform_cleanup(void) | |
| { | |
| platform_driver_unregister(&ehci_mv_driver); | |
| } | |
| module_exit(ehci_platform_cleanup); | |
| MODULE_DESCRIPTION("Marvell EHCI driver"); | |
| MODULE_AUTHOR("Chao Xie <chao.xie@marvell.com>"); | |
| MODULE_AUTHOR("Neil Zhang <zhangwm@marvell.com>"); | |
| MODULE_ALIAS("mv-ehci"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DEVICE_TABLE(of, ehci_mv_dt_ids); |