| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * ulpi.c - USB ULPI PHY bus | |
| * | |
| * Copyright (C) 2015 Intel Corporation | |
| * | |
| * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com> | |
| */ | |
| #include <linux/ulpi/interface.h> | |
| #include <linux/ulpi/driver.h> | |
| #include <linux/ulpi/regs.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/acpi.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/of.h> | |
| #include <linux/of_device.h> | |
| #include <linux/clk/clk-conf.h> | |
| /* -------------------------------------------------------------------------- */ | |
| int ulpi_read(struct ulpi *ulpi, u8 addr) | |
| { | |
| return ulpi->ops->read(ulpi->dev.parent, addr); | |
| } | |
| EXPORT_SYMBOL_GPL(ulpi_read); | |
| int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val) | |
| { | |
| return ulpi->ops->write(ulpi->dev.parent, addr, val); | |
| } | |
| EXPORT_SYMBOL_GPL(ulpi_write); | |
| /* -------------------------------------------------------------------------- */ | |
| static int ulpi_match(struct device *dev, const struct device_driver *driver) | |
| { | |
| struct ulpi_driver *drv = to_ulpi_driver(driver); | |
| struct ulpi *ulpi = to_ulpi_dev(dev); | |
| const struct ulpi_device_id *id; | |
| /* | |
| * Some ULPI devices don't have a vendor id | |
| * or provide an id_table so rely on OF match. | |
| */ | |
| if (ulpi->id.vendor == 0 || !drv->id_table) | |
| return of_driver_match_device(dev, driver); | |
| for (id = drv->id_table; id->vendor; id++) | |
| if (id->vendor == ulpi->id.vendor && | |
| id->product == ulpi->id.product) | |
| return 1; | |
| return 0; | |
| } | |
| static int ulpi_uevent(const struct device *dev, struct kobj_uevent_env *env) | |
| { | |
| const struct ulpi *ulpi = to_ulpi_dev(dev); | |
| int ret; | |
| ret = of_device_uevent_modalias(dev, env); | |
| if (ret != -ENODEV) | |
| return ret; | |
| if (add_uevent_var(env, "MODALIAS=ulpi:v%04xp%04x", | |
| ulpi->id.vendor, ulpi->id.product)) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| static int ulpi_probe(struct device *dev) | |
| { | |
| struct ulpi_driver *drv = to_ulpi_driver(dev->driver); | |
| int ret; | |
| ret = of_clk_set_defaults(dev->of_node, false); | |
| if (ret < 0) | |
| return ret; | |
| return drv->probe(to_ulpi_dev(dev)); | |
| } | |
| static void ulpi_remove(struct device *dev) | |
| { | |
| struct ulpi_driver *drv = to_ulpi_driver(dev->driver); | |
| if (drv->remove) | |
| drv->remove(to_ulpi_dev(dev)); | |
| } | |
| static const struct bus_type ulpi_bus = { | |
| .name = "ulpi", | |
| .match = ulpi_match, | |
| .uevent = ulpi_uevent, | |
| .probe = ulpi_probe, | |
| .remove = ulpi_remove, | |
| }; | |
| /* -------------------------------------------------------------------------- */ | |
| static ssize_t modalias_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| int len; | |
| struct ulpi *ulpi = to_ulpi_dev(dev); | |
| len = of_device_modalias(dev, buf, PAGE_SIZE); | |
| if (len != -ENODEV) | |
| return len; | |
| return sprintf(buf, "ulpi:v%04xp%04x\n", | |
| ulpi->id.vendor, ulpi->id.product); | |
| } | |
| static DEVICE_ATTR_RO(modalias); | |
| static struct attribute *ulpi_dev_attrs[] = { | |
| &dev_attr_modalias.attr, | |
| NULL | |
| }; | |
| static const struct attribute_group ulpi_dev_attr_group = { | |
| .attrs = ulpi_dev_attrs, | |
| }; | |
| static const struct attribute_group *ulpi_dev_attr_groups[] = { | |
| &ulpi_dev_attr_group, | |
| NULL | |
| }; | |
| static void ulpi_dev_release(struct device *dev) | |
| { | |
| of_node_put(dev->of_node); | |
| kfree(to_ulpi_dev(dev)); | |
| } | |
| static const struct device_type ulpi_dev_type = { | |
| .name = "ulpi_device", | |
| .groups = ulpi_dev_attr_groups, | |
| .release = ulpi_dev_release, | |
| }; | |
| /* -------------------------------------------------------------------------- */ | |
| /** | |
| * __ulpi_register_driver - register a driver with the ULPI bus | |
| * @drv: driver being registered | |
| * @module: ends up being THIS_MODULE | |
| * | |
| * Registers a driver with the ULPI bus. | |
| */ | |
| int __ulpi_register_driver(struct ulpi_driver *drv, struct module *module) | |
| { | |
| if (!drv->probe) | |
| return -EINVAL; | |
| drv->driver.owner = module; | |
| drv->driver.bus = &ulpi_bus; | |
| return driver_register(&drv->driver); | |
| } | |
| EXPORT_SYMBOL_GPL(__ulpi_register_driver); | |
| /** | |
| * ulpi_unregister_driver - unregister a driver with the ULPI bus | |
| * @drv: driver to unregister | |
| * | |
| * Unregisters a driver with the ULPI bus. | |
| */ | |
| void ulpi_unregister_driver(struct ulpi_driver *drv) | |
| { | |
| driver_unregister(&drv->driver); | |
| } | |
| EXPORT_SYMBOL_GPL(ulpi_unregister_driver); | |
| /* -------------------------------------------------------------------------- */ | |
| static int ulpi_of_register(struct ulpi *ulpi) | |
| { | |
| struct device_node *np = NULL, *child; | |
| struct device *parent; | |
| /* Find a ulpi bus underneath the parent or the grandparent */ | |
| parent = ulpi->dev.parent; | |
| if (parent->of_node) | |
| np = of_get_child_by_name(parent->of_node, "ulpi"); | |
| else if (parent->parent && parent->parent->of_node) | |
| np = of_get_child_by_name(parent->parent->of_node, "ulpi"); | |
| if (!np) | |
| return 0; | |
| child = of_get_next_available_child(np, NULL); | |
| of_node_put(np); | |
| if (!child) | |
| return -EINVAL; | |
| ulpi->dev.of_node = child; | |
| return 0; | |
| } | |
| static int ulpi_read_id(struct ulpi *ulpi) | |
| { | |
| int ret; | |
| /* Test the interface */ | |
| ret = ulpi_write(ulpi, ULPI_SCRATCH, 0xaa); | |
| if (ret < 0) | |
| goto err; | |
| ret = ulpi_read(ulpi, ULPI_SCRATCH); | |
| if (ret < 0) | |
| return ret; | |
| if (ret != 0xaa) | |
| goto err; | |
| ulpi->id.vendor = ulpi_read(ulpi, ULPI_VENDOR_ID_LOW); | |
| ulpi->id.vendor |= ulpi_read(ulpi, ULPI_VENDOR_ID_HIGH) << 8; | |
| ulpi->id.product = ulpi_read(ulpi, ULPI_PRODUCT_ID_LOW); | |
| ulpi->id.product |= ulpi_read(ulpi, ULPI_PRODUCT_ID_HIGH) << 8; | |
| /* Some ULPI devices don't have a vendor id so rely on OF match */ | |
| if (ulpi->id.vendor == 0) | |
| goto err; | |
| request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product); | |
| return 0; | |
| err: | |
| of_request_module(ulpi->dev.of_node); | |
| return 0; | |
| } | |
| static int ulpi_regs_show(struct seq_file *seq, void *data) | |
| { | |
| struct ulpi *ulpi = seq->private; | |
| #define ulpi_print(name, reg) do { \ | |
| int ret = ulpi_read(ulpi, reg); \ | |
| if (ret < 0) \ | |
| return ret; \ | |
| seq_printf(seq, name " %.02x\n", ret); \ | |
| } while (0) | |
| ulpi_print("Vendor ID Low ", ULPI_VENDOR_ID_LOW); | |
| ulpi_print("Vendor ID High ", ULPI_VENDOR_ID_HIGH); | |
| ulpi_print("Product ID Low ", ULPI_PRODUCT_ID_LOW); | |
| ulpi_print("Product ID High ", ULPI_PRODUCT_ID_HIGH); | |
| ulpi_print("Function Control ", ULPI_FUNC_CTRL); | |
| ulpi_print("Interface Control ", ULPI_IFC_CTRL); | |
| ulpi_print("OTG Control ", ULPI_OTG_CTRL); | |
| ulpi_print("USB Interrupt Enable Rising ", ULPI_USB_INT_EN_RISE); | |
| ulpi_print("USB Interrupt Enable Falling", ULPI_USB_INT_EN_FALL); | |
| ulpi_print("USB Interrupt Status ", ULPI_USB_INT_STS); | |
| ulpi_print("USB Interrupt Latch ", ULPI_USB_INT_LATCH); | |
| ulpi_print("Debug ", ULPI_DEBUG); | |
| ulpi_print("Scratch Register ", ULPI_SCRATCH); | |
| ulpi_print("Carkit Control ", ULPI_CARKIT_CTRL); | |
| ulpi_print("Carkit Interrupt Delay ", ULPI_CARKIT_INT_DELAY); | |
| ulpi_print("Carkit Interrupt Enable ", ULPI_CARKIT_INT_EN); | |
| ulpi_print("Carkit Interrupt Status ", ULPI_CARKIT_INT_STS); | |
| ulpi_print("Carkit Interrupt Latch ", ULPI_CARKIT_INT_LATCH); | |
| ulpi_print("Carkit Pulse Control ", ULPI_CARKIT_PLS_CTRL); | |
| ulpi_print("Transmit Positive Width ", ULPI_TX_POS_WIDTH); | |
| ulpi_print("Transmit Negative Width ", ULPI_TX_NEG_WIDTH); | |
| ulpi_print("Receive Polarity Recovery ", ULPI_POLARITY_RECOVERY); | |
| return 0; | |
| } | |
| DEFINE_SHOW_ATTRIBUTE(ulpi_regs); | |
| static struct dentry *ulpi_root; | |
| static int ulpi_register(struct device *dev, struct ulpi *ulpi) | |
| { | |
| int ret; | |
| struct dentry *root; | |
| ulpi->dev.parent = dev; /* needed early for ops */ | |
| ulpi->dev.bus = &ulpi_bus; | |
| ulpi->dev.type = &ulpi_dev_type; | |
| device_initialize(&ulpi->dev); | |
| dev_set_name(&ulpi->dev, "%s.ulpi", dev_name(dev)); | |
| ACPI_COMPANION_SET(&ulpi->dev, ACPI_COMPANION(dev)); | |
| ret = ulpi_of_register(ulpi); | |
| if (ret) | |
| return ret; | |
| ret = ulpi_read_id(ulpi); | |
| if (ret) | |
| return ret; | |
| ret = device_add(&ulpi->dev); | |
| if (ret) | |
| return ret; | |
| root = debugfs_create_dir(dev_name(&ulpi->dev), ulpi_root); | |
| debugfs_create_file("regs", 0444, root, ulpi, &ulpi_regs_fops); | |
| dev_dbg(&ulpi->dev, "registered ULPI PHY: vendor %04x, product %04x\n", | |
| ulpi->id.vendor, ulpi->id.product); | |
| return 0; | |
| } | |
| /** | |
| * ulpi_register_interface - instantiate new ULPI device | |
| * @dev: USB controller's device interface | |
| * @ops: ULPI register access | |
| * | |
| * Allocates and registers a ULPI device and an interface for it. Called from | |
| * the USB controller that provides the ULPI interface. | |
| */ | |
| struct ulpi *ulpi_register_interface(struct device *dev, | |
| const struct ulpi_ops *ops) | |
| { | |
| struct ulpi *ulpi; | |
| int ret; | |
| ulpi = kzalloc_obj(*ulpi); | |
| if (!ulpi) | |
| return ERR_PTR(-ENOMEM); | |
| ulpi->ops = ops; | |
| ret = ulpi_register(dev, ulpi); | |
| if (ret) { | |
| put_device(&ulpi->dev); | |
| return ERR_PTR(ret); | |
| } | |
| return ulpi; | |
| } | |
| EXPORT_SYMBOL_GPL(ulpi_register_interface); | |
| /** | |
| * ulpi_unregister_interface - unregister ULPI interface | |
| * @ulpi: struct ulpi_interface | |
| * | |
| * Unregisters a ULPI device and it's interface that was created with | |
| * ulpi_create_interface(). | |
| */ | |
| void ulpi_unregister_interface(struct ulpi *ulpi) | |
| { | |
| debugfs_lookup_and_remove(dev_name(&ulpi->dev), ulpi_root); | |
| device_unregister(&ulpi->dev); | |
| } | |
| EXPORT_SYMBOL_GPL(ulpi_unregister_interface); | |
| /* -------------------------------------------------------------------------- */ | |
| static int __init ulpi_init(void) | |
| { | |
| int ret; | |
| ulpi_root = debugfs_create_dir(KBUILD_MODNAME, NULL); | |
| ret = bus_register(&ulpi_bus); | |
| if (ret) | |
| debugfs_remove(ulpi_root); | |
| return ret; | |
| } | |
| subsys_initcall(ulpi_init); | |
| static void __exit ulpi_exit(void) | |
| { | |
| bus_unregister(&ulpi_bus); | |
| debugfs_remove(ulpi_root); | |
| } | |
| module_exit(ulpi_exit); | |
| MODULE_AUTHOR("Intel Corporation"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_DESCRIPTION("USB ULPI PHY bus"); |