| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * UIO driver for Hilscher NetX based fieldbus cards (cifX, comX). | |
| * See http://www.hilscher.com for details. | |
| * | |
| * (C) 2007 Hans J. Koch <hjk@hansjkoch.de> | |
| * (C) 2008 Manuel Traut <manut@linutronix.de> | |
| * | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/io.h> | |
| #include <linux/module.h> | |
| #include <linux/pci.h> | |
| #include <linux/slab.h> | |
| #include <linux/uio_driver.h> | |
| #define PCI_VENDOR_ID_HILSCHER 0x15CF | |
| #define PCI_DEVICE_ID_HILSCHER_NETX 0x0000 | |
| #define PCI_DEVICE_ID_HILSCHER_NETPLC 0x0010 | |
| #define PCI_SUBDEVICE_ID_NETPLC_RAM 0x0000 | |
| #define PCI_SUBDEVICE_ID_NETPLC_FLASH 0x0001 | |
| #define PCI_SUBDEVICE_ID_NXSB_PCA 0x3235 | |
| #define PCI_SUBDEVICE_ID_NXPCA 0x3335 | |
| #define DPM_HOST_INT_EN0 0xfff0 | |
| #define DPM_HOST_INT_STAT0 0xffe0 | |
| #define DPM_HOST_INT_MASK 0xe600ffff | |
| #define DPM_HOST_INT_GLOBAL_EN 0x80000000 | |
| static irqreturn_t netx_handler(int irq, struct uio_info *dev_info) | |
| { | |
| void __iomem *int_enable_reg = dev_info->mem[0].internal_addr | |
| + DPM_HOST_INT_EN0; | |
| void __iomem *int_status_reg = dev_info->mem[0].internal_addr | |
| + DPM_HOST_INT_STAT0; | |
| /* Is one of our interrupts enabled and active ? */ | |
| if (!(ioread32(int_enable_reg) & ioread32(int_status_reg) | |
| & DPM_HOST_INT_MASK)) | |
| return IRQ_NONE; | |
| /* Disable interrupt */ | |
| iowrite32(ioread32(int_enable_reg) & ~DPM_HOST_INT_GLOBAL_EN, | |
| int_enable_reg); | |
| return IRQ_HANDLED; | |
| } | |
| static int netx_pci_probe(struct pci_dev *dev, | |
| const struct pci_device_id *id) | |
| { | |
| struct uio_info *info; | |
| int bar; | |
| info = devm_kzalloc(&dev->dev, sizeof(struct uio_info), GFP_KERNEL); | |
| if (!info) | |
| return -ENOMEM; | |
| if (pci_enable_device(dev)) | |
| return -ENODEV; | |
| if (pci_request_regions(dev, "netx")) | |
| goto out_disable; | |
| switch (id->device) { | |
| case PCI_DEVICE_ID_HILSCHER_NETX: | |
| bar = 0; | |
| info->name = "netx"; | |
| break; | |
| case PCI_DEVICE_ID_HILSCHER_NETPLC: | |
| bar = 0; | |
| info->name = "netplc"; | |
| break; | |
| default: | |
| bar = 2; | |
| info->name = "netx_plx"; | |
| } | |
| /* BAR0 or 2 points to the card's dual port memory */ | |
| info->mem[0].addr = pci_resource_start(dev, bar); | |
| if (!info->mem[0].addr) | |
| goto out_release; | |
| info->mem[0].internal_addr = ioremap(pci_resource_start(dev, bar), | |
| pci_resource_len(dev, bar)); | |
| if (!info->mem[0].internal_addr) | |
| goto out_release; | |
| info->mem[0].size = pci_resource_len(dev, bar); | |
| info->mem[0].memtype = UIO_MEM_PHYS; | |
| info->irq = dev->irq; | |
| info->irq_flags = IRQF_SHARED; | |
| info->handler = netx_handler; | |
| info->version = "0.0.1"; | |
| /* Make sure all interrupts are disabled */ | |
| iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0); | |
| if (uio_register_device(&dev->dev, info)) | |
| goto out_unmap; | |
| pci_set_drvdata(dev, info); | |
| dev_info(&dev->dev, "Found %s card, registered UIO device.\n", | |
| info->name); | |
| return 0; | |
| out_unmap: | |
| iounmap(info->mem[0].internal_addr); | |
| out_release: | |
| pci_release_regions(dev); | |
| out_disable: | |
| pci_disable_device(dev); | |
| return -ENODEV; | |
| } | |
| static void netx_pci_remove(struct pci_dev *dev) | |
| { | |
| struct uio_info *info = pci_get_drvdata(dev); | |
| /* Disable all interrupts */ | |
| iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0); | |
| uio_unregister_device(info); | |
| pci_release_regions(dev); | |
| pci_disable_device(dev); | |
| iounmap(info->mem[0].internal_addr); | |
| } | |
| static const struct pci_device_id netx_pci_ids[] = { | |
| { | |
| .vendor = PCI_VENDOR_ID_HILSCHER, | |
| .device = PCI_DEVICE_ID_HILSCHER_NETX, | |
| .subvendor = 0, | |
| .subdevice = 0, | |
| }, | |
| { | |
| .vendor = PCI_VENDOR_ID_HILSCHER, | |
| .device = PCI_DEVICE_ID_HILSCHER_NETPLC, | |
| .subvendor = PCI_VENDOR_ID_HILSCHER, | |
| .subdevice = PCI_SUBDEVICE_ID_NETPLC_RAM, | |
| }, | |
| { | |
| .vendor = PCI_VENDOR_ID_HILSCHER, | |
| .device = PCI_DEVICE_ID_HILSCHER_NETPLC, | |
| .subvendor = PCI_VENDOR_ID_HILSCHER, | |
| .subdevice = PCI_SUBDEVICE_ID_NETPLC_FLASH, | |
| }, | |
| { | |
| .vendor = PCI_VENDOR_ID_PLX, | |
| .device = PCI_DEVICE_ID_PLX_9030, | |
| .subvendor = PCI_VENDOR_ID_PLX, | |
| .subdevice = PCI_SUBDEVICE_ID_NXSB_PCA, | |
| }, | |
| { | |
| .vendor = PCI_VENDOR_ID_PLX, | |
| .device = PCI_DEVICE_ID_PLX_9030, | |
| .subvendor = PCI_VENDOR_ID_PLX, | |
| .subdevice = PCI_SUBDEVICE_ID_NXPCA, | |
| }, | |
| { 0, } | |
| }; | |
| static struct pci_driver netx_pci_driver = { | |
| .name = "netx", | |
| .id_table = netx_pci_ids, | |
| .probe = netx_pci_probe, | |
| .remove = netx_pci_remove, | |
| }; | |
| module_pci_driver(netx_pci_driver); | |
| MODULE_DEVICE_TABLE(pci, netx_pci_ids); | |
| MODULE_DESCRIPTION("UIO driver for Hilscher NetX based fieldbus cards"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_AUTHOR("Hans J. Koch, Manuel Traut"); |