| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * UIO driver for Humusoft MF624 DAQ card. | |
| * Copyright (C) 2011 Rostislav Lisovy <lisovy@gmail.com>, | |
| * Czech Technical University in Prague | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/device.h> | |
| #include <linux/pci.h> | |
| #include <linux/slab.h> | |
| #include <linux/io.h> | |
| #include <linux/kernel.h> | |
| #include <linux/uio_driver.h> | |
| #define PCI_VENDOR_ID_HUMUSOFT 0x186c | |
| #define PCI_DEVICE_ID_MF624 0x0624 | |
| #define PCI_SUBVENDOR_ID_HUMUSOFT 0x186c | |
| #define PCI_SUBDEVICE_DEVICE 0x0624 | |
| /* BAR0 Interrupt control/status register */ | |
| #define INTCSR 0x4C | |
| #define INTCSR_ADINT_ENABLE (1 << 0) | |
| #define INTCSR_CTR4INT_ENABLE (1 << 3) | |
| #define INTCSR_PCIINT_ENABLE (1 << 6) | |
| #define INTCSR_ADINT_STATUS (1 << 2) | |
| #define INTCSR_CTR4INT_STATUS (1 << 5) | |
| enum mf624_interrupt_source {ADC, CTR4, ALL}; | |
| static void mf624_disable_interrupt(enum mf624_interrupt_source source, | |
| struct uio_info *info) | |
| { | |
| void __iomem *INTCSR_reg = info->mem[0].internal_addr + INTCSR; | |
| switch (source) { | |
| case ADC: | |
| iowrite32(ioread32(INTCSR_reg) | |
| & ~(INTCSR_ADINT_ENABLE | INTCSR_PCIINT_ENABLE), | |
| INTCSR_reg); | |
| break; | |
| case CTR4: | |
| iowrite32(ioread32(INTCSR_reg) | |
| & ~(INTCSR_CTR4INT_ENABLE | INTCSR_PCIINT_ENABLE), | |
| INTCSR_reg); | |
| break; | |
| case ALL: | |
| default: | |
| iowrite32(ioread32(INTCSR_reg) | |
| & ~(INTCSR_ADINT_ENABLE | INTCSR_CTR4INT_ENABLE | |
| | INTCSR_PCIINT_ENABLE), | |
| INTCSR_reg); | |
| break; | |
| } | |
| } | |
| static void mf624_enable_interrupt(enum mf624_interrupt_source source, | |
| struct uio_info *info) | |
| { | |
| void __iomem *INTCSR_reg = info->mem[0].internal_addr + INTCSR; | |
| switch (source) { | |
| case ADC: | |
| iowrite32(ioread32(INTCSR_reg) | |
| | INTCSR_ADINT_ENABLE | INTCSR_PCIINT_ENABLE, | |
| INTCSR_reg); | |
| break; | |
| case CTR4: | |
| iowrite32(ioread32(INTCSR_reg) | |
| | INTCSR_CTR4INT_ENABLE | INTCSR_PCIINT_ENABLE, | |
| INTCSR_reg); | |
| break; | |
| case ALL: | |
| default: | |
| iowrite32(ioread32(INTCSR_reg) | |
| | INTCSR_ADINT_ENABLE | INTCSR_CTR4INT_ENABLE | |
| | INTCSR_PCIINT_ENABLE, | |
| INTCSR_reg); | |
| break; | |
| } | |
| } | |
| static irqreturn_t mf624_irq_handler(int irq, struct uio_info *info) | |
| { | |
| void __iomem *INTCSR_reg = info->mem[0].internal_addr + INTCSR; | |
| if ((ioread32(INTCSR_reg) & INTCSR_ADINT_ENABLE) | |
| && (ioread32(INTCSR_reg) & INTCSR_ADINT_STATUS)) { | |
| mf624_disable_interrupt(ADC, info); | |
| return IRQ_HANDLED; | |
| } | |
| if ((ioread32(INTCSR_reg) & INTCSR_CTR4INT_ENABLE) | |
| && (ioread32(INTCSR_reg) & INTCSR_CTR4INT_STATUS)) { | |
| mf624_disable_interrupt(CTR4, info); | |
| return IRQ_HANDLED; | |
| } | |
| return IRQ_NONE; | |
| } | |
| static int mf624_irqcontrol(struct uio_info *info, s32 irq_on) | |
| { | |
| if (irq_on == 0) | |
| mf624_disable_interrupt(ALL, info); | |
| else if (irq_on == 1) | |
| mf624_enable_interrupt(ALL, info); | |
| return 0; | |
| } | |
| static int mf624_setup_mem(struct pci_dev *dev, int bar, struct uio_mem *mem, const char *name) | |
| { | |
| resource_size_t start = pci_resource_start(dev, bar); | |
| resource_size_t len = pci_resource_len(dev, bar); | |
| mem->name = name; | |
| mem->addr = start & PAGE_MASK; | |
| mem->offs = start & ~PAGE_MASK; | |
| if (!mem->addr) | |
| return -ENODEV; | |
| mem->size = ((start & ~PAGE_MASK) + len + PAGE_SIZE - 1) & PAGE_MASK; | |
| mem->memtype = UIO_MEM_PHYS; | |
| mem->internal_addr = pci_ioremap_bar(dev, bar); | |
| if (!mem->internal_addr) | |
| return -ENODEV; | |
| return 0; | |
| } | |
| static int mf624_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) | |
| { | |
| struct uio_info *info; | |
| info = devm_kzalloc(&dev->dev, sizeof(struct uio_info), GFP_KERNEL); | |
| if (!info) | |
| return -ENOMEM; | |
| if (pci_enable_device(dev)) | |
| return -ENODEV; | |
| if (pci_request_regions(dev, "mf624")) | |
| goto out_disable; | |
| info->name = "mf624"; | |
| info->version = "0.0.1"; | |
| /* Note: Datasheet says device uses BAR0, BAR1, BAR2 -- do not trust it */ | |
| /* BAR0 */ | |
| if (mf624_setup_mem(dev, 0, &info->mem[0], "PCI chipset, interrupts, status " | |
| "bits, special functions")) | |
| goto out_release; | |
| /* BAR2 */ | |
| if (mf624_setup_mem(dev, 2, &info->mem[1], "ADC, DAC, DIO")) | |
| goto out_unmap0; | |
| /* BAR4 */ | |
| if (mf624_setup_mem(dev, 4, &info->mem[2], "Counter/timer chip")) | |
| goto out_unmap1; | |
| info->irq = dev->irq; | |
| info->irq_flags = IRQF_SHARED; | |
| info->handler = mf624_irq_handler; | |
| info->irqcontrol = mf624_irqcontrol; | |
| if (uio_register_device(&dev->dev, info)) | |
| goto out_unmap2; | |
| pci_set_drvdata(dev, info); | |
| return 0; | |
| out_unmap2: | |
| iounmap(info->mem[2].internal_addr); | |
| out_unmap1: | |
| iounmap(info->mem[1].internal_addr); | |
| out_unmap0: | |
| iounmap(info->mem[0].internal_addr); | |
| out_release: | |
| pci_release_regions(dev); | |
| out_disable: | |
| pci_disable_device(dev); | |
| return -ENODEV; | |
| } | |
| static void mf624_pci_remove(struct pci_dev *dev) | |
| { | |
| struct uio_info *info = pci_get_drvdata(dev); | |
| mf624_disable_interrupt(ALL, info); | |
| uio_unregister_device(info); | |
| pci_release_regions(dev); | |
| pci_disable_device(dev); | |
| iounmap(info->mem[0].internal_addr); | |
| iounmap(info->mem[1].internal_addr); | |
| iounmap(info->mem[2].internal_addr); | |
| } | |
| static const struct pci_device_id mf624_pci_id[] = { | |
| { PCI_DEVICE(PCI_VENDOR_ID_HUMUSOFT, PCI_DEVICE_ID_MF624) }, | |
| { 0, } | |
| }; | |
| static struct pci_driver mf624_pci_driver = { | |
| .name = "mf624", | |
| .id_table = mf624_pci_id, | |
| .probe = mf624_pci_probe, | |
| .remove = mf624_pci_remove, | |
| }; | |
| MODULE_DEVICE_TABLE(pci, mf624_pci_id); | |
| module_pci_driver(mf624_pci_driver); | |
| MODULE_DESCRIPTION("UIO driver for Humusoft MF624 DAQ card"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_AUTHOR("Rostislav Lisovy <lisovy@gmail.com>"); |