| /* SPDX-License-Identifier: GPL-2.0+ */ | |
| /* | |
| * Driver for 8250/16550-type serial ports | |
| * | |
| * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. | |
| * | |
| * Copyright (C) 2001 Russell King. | |
| */ | |
| #include <linux/bits.h> | |
| #include <linux/serial_8250.h> | |
| #include <linux/serial_core.h> | |
| #include <linux/dmaengine.h> | |
| #include "../serial_mctrl_gpio.h" | |
| struct uart_8250_dma { | |
| int (*tx_dma)(struct uart_8250_port *p); | |
| int (*rx_dma)(struct uart_8250_port *p); | |
| void (*prepare_tx_dma)(struct uart_8250_port *p); | |
| void (*prepare_rx_dma)(struct uart_8250_port *p); | |
| /* Filter function */ | |
| dma_filter_fn fn; | |
| /* Parameter to the filter function */ | |
| void *rx_param; | |
| void *tx_param; | |
| struct dma_slave_config rxconf; | |
| struct dma_slave_config txconf; | |
| struct dma_chan *rxchan; | |
| struct dma_chan *txchan; | |
| /* Device address base for DMA operations */ | |
| phys_addr_t rx_dma_addr; | |
| phys_addr_t tx_dma_addr; | |
| /* DMA address of the buffer in memory */ | |
| dma_addr_t rx_addr; | |
| dma_addr_t tx_addr; | |
| dma_cookie_t rx_cookie; | |
| dma_cookie_t tx_cookie; | |
| void *rx_buf; | |
| size_t rx_size; | |
| size_t tx_size; | |
| unsigned char tx_running; | |
| unsigned char tx_err; | |
| unsigned char rx_running; | |
| }; | |
| struct old_serial_port { | |
| unsigned int uart; | |
| unsigned int baud_base; | |
| unsigned int port; | |
| unsigned int irq; | |
| upf_t flags; | |
| unsigned char io_type; | |
| unsigned char __iomem *iomem_base; | |
| unsigned short iomem_reg_shift; | |
| }; | |
| struct serial8250_config { | |
| const char *name; | |
| unsigned short fifo_size; | |
| unsigned short tx_loadsz; | |
| unsigned char fcr; | |
| unsigned char rxtrig_bytes[UART_FCR_R_TRIG_MAX_STATE]; | |
| unsigned int flags; | |
| }; | |
| #define UART_CAP_FIFO BIT(8) /* UART has FIFO */ | |
| #define UART_CAP_EFR BIT(9) /* UART has EFR */ | |
| #define UART_CAP_SLEEP BIT(10) /* UART has IER sleep */ | |
| #define UART_CAP_AFE BIT(11) /* MCR-based hw flow control */ | |
| #define UART_CAP_UUE BIT(12) /* UART needs IER bit 6 set (Xscale) */ | |
| #define UART_CAP_RTOIE BIT(13) /* UART needs IER bit 4 set (Xscale, Tegra) */ | |
| #define UART_CAP_HFIFO BIT(14) /* UART has a "hidden" FIFO */ | |
| #define UART_CAP_RPM BIT(15) /* Runtime PM is active while idle */ | |
| #define UART_CAP_IRDA BIT(16) /* UART supports IrDA line discipline */ | |
| #define UART_CAP_MINI BIT(17) /* Mini UART on BCM283X family lacks: | |
| * STOP PARITY EPAR SPAR WLEN5 WLEN6 | |
| */ | |
| #define UART_CAP_NOTEMT BIT(18) /* UART without interrupt on TEMT available */ | |
| #define UART_BUG_QUOT BIT(0) /* UART has buggy quot LSB */ | |
| #define UART_BUG_TXEN BIT(1) /* UART has buggy TX IIR status */ | |
| #define UART_BUG_NOMSR BIT(2) /* UART has buggy MSR status bits (Au1x00) */ | |
| #define UART_BUG_THRE BIT(3) /* UART has buggy THRE reassertion */ | |
| #define UART_BUG_TXRACE BIT(5) /* UART Tx fails to set remote DR */ | |
| /* Module parameters */ | |
| #define UART_NR CONFIG_SERIAL_8250_NR_UARTS | |
| extern unsigned int nr_uarts; | |
| #define SERIAL8250_PORT_FLAGS(_base, _irq, _flags) \ | |
| { \ | |
| .iobase = _base, \ | |
| .irq = _irq, \ | |
| .uartclk = 1843200, \ | |
| .iotype = UPIO_PORT, \ | |
| .flags = UPF_BOOT_AUTOCONF | (_flags), \ | |
| } | |
| #define SERIAL8250_PORT(_base, _irq) SERIAL8250_PORT_FLAGS(_base, _irq, 0) | |
| extern struct uart_driver serial8250_reg; | |
| void serial8250_register_ports(struct uart_driver *drv, struct device *dev); | |
| /* Legacy ISA bus related APIs */ | |
| typedef void (*serial8250_isa_config_fn)(int, struct uart_port *, u32 *); | |
| extern serial8250_isa_config_fn serial8250_isa_config; | |
| void serial8250_isa_init_ports(void); | |
| extern struct platform_device *serial8250_isa_devs; | |
| extern const struct uart_ops *univ8250_port_base_ops; | |
| extern struct uart_ops univ8250_port_ops; | |
| static inline int serial_in(struct uart_8250_port *up, int offset) | |
| { | |
| return up->port.serial_in(&up->port, offset); | |
| } | |
| static inline void serial_out(struct uart_8250_port *up, int offset, int value) | |
| { | |
| up->port.serial_out(&up->port, offset, value); | |
| } | |
| /** | |
| * serial_lsr_in - Read LSR register and preserve flags across reads | |
| * @up: uart 8250 port | |
| * | |
| * Read LSR register and handle saving non-preserved flags across reads. | |
| * The flags that are not preserved across reads are stored into | |
| * up->lsr_saved_flags. | |
| * | |
| * Returns LSR value or'ed with the preserved flags (if any). | |
| */ | |
| static inline u16 serial_lsr_in(struct uart_8250_port *up) | |
| { | |
| u16 lsr = up->lsr_saved_flags; | |
| lsr |= serial_in(up, UART_LSR); | |
| up->lsr_saved_flags = lsr & up->lsr_save_mask; | |
| return lsr; | |
| } | |
| /* | |
| * For the 16C950 | |
| */ | |
| static void serial_icr_write(struct uart_8250_port *up, int offset, int value) | |
| { | |
| serial_out(up, UART_SCR, offset); | |
| serial_out(up, UART_ICR, value); | |
| } | |
| static unsigned int __maybe_unused serial_icr_read(struct uart_8250_port *up, | |
| int offset) | |
| { | |
| unsigned int value; | |
| serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD); | |
| serial_out(up, UART_SCR, offset); | |
| value = serial_in(up, UART_ICR); | |
| serial_icr_write(up, UART_ACR, up->acr); | |
| return value; | |
| } | |
| void serial8250_clear_fifos(struct uart_8250_port *p); | |
| void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p); | |
| void serial8250_fifo_wait_for_lsr_thre(struct uart_8250_port *up, | |
| struct nbcon_write_context *wctxt, | |
| unsigned int count); | |
| void serial8250_rpm_get(struct uart_8250_port *p); | |
| void serial8250_rpm_put(struct uart_8250_port *p); | |
| DEFINE_GUARD(serial8250_rpm, struct uart_8250_port *, | |
| serial8250_rpm_get(_T), serial8250_rpm_put(_T)); | |
| static inline u32 serial_dl_read(struct uart_8250_port *up) | |
| { | |
| return up->dl_read(up); | |
| } | |
| static inline void serial_dl_write(struct uart_8250_port *up, u32 value) | |
| { | |
| up->dl_write(up, value); | |
| } | |
| static inline bool serial8250_set_THRI(struct uart_8250_port *up) | |
| { | |
| /* Port locked to synchronize UART_IER access against the console. */ | |
| lockdep_assert_held_once(&up->port.lock); | |
| if (up->ier & UART_IER_THRI) | |
| return false; | |
| up->ier |= UART_IER_THRI; | |
| serial_out(up, UART_IER, up->ier); | |
| return true; | |
| } | |
| static inline bool serial8250_clear_THRI(struct uart_8250_port *up) | |
| { | |
| /* Port locked to synchronize UART_IER access against the console. */ | |
| lockdep_assert_held_once(&up->port.lock); | |
| if (!(up->ier & UART_IER_THRI)) | |
| return false; | |
| up->ier &= ~UART_IER_THRI; | |
| serial_out(up, UART_IER, up->ier); | |
| return true; | |
| } | |
| struct uart_8250_port *serial8250_setup_port(int index); | |
| struct uart_8250_port *serial8250_get_port(int line); | |
| int serial8250_em485_config(struct uart_port *port, struct ktermios *termios, | |
| struct serial_rs485 *rs485); | |
| void serial8250_em485_start_tx(struct uart_8250_port *p, bool toggle_ier); | |
| void serial8250_em485_stop_tx(struct uart_8250_port *p, bool toggle_ier); | |
| void serial8250_em485_destroy(struct uart_8250_port *p); | |
| extern struct serial_rs485 serial8250_em485_supported; | |
| /* MCR <-> TIOCM conversion */ | |
| static inline int serial8250_TIOCM_to_MCR(int tiocm) | |
| { | |
| int mcr = 0; | |
| if (tiocm & TIOCM_RTS) | |
| mcr |= UART_MCR_RTS; | |
| if (tiocm & TIOCM_DTR) | |
| mcr |= UART_MCR_DTR; | |
| if (tiocm & TIOCM_OUT1) | |
| mcr |= UART_MCR_OUT1; | |
| if (tiocm & TIOCM_OUT2) | |
| mcr |= UART_MCR_OUT2; | |
| if (tiocm & TIOCM_LOOP) | |
| mcr |= UART_MCR_LOOP; | |
| return mcr; | |
| } | |
| static inline int serial8250_MCR_to_TIOCM(int mcr) | |
| { | |
| int tiocm = 0; | |
| if (mcr & UART_MCR_RTS) | |
| tiocm |= TIOCM_RTS; | |
| if (mcr & UART_MCR_DTR) | |
| tiocm |= TIOCM_DTR; | |
| if (mcr & UART_MCR_OUT1) | |
| tiocm |= TIOCM_OUT1; | |
| if (mcr & UART_MCR_OUT2) | |
| tiocm |= TIOCM_OUT2; | |
| if (mcr & UART_MCR_LOOP) | |
| tiocm |= TIOCM_LOOP; | |
| return tiocm; | |
| } | |
| /* MSR <-> TIOCM conversion */ | |
| static inline int serial8250_MSR_to_TIOCM(int msr) | |
| { | |
| int tiocm = 0; | |
| if (msr & UART_MSR_DCD) | |
| tiocm |= TIOCM_CAR; | |
| if (msr & UART_MSR_RI) | |
| tiocm |= TIOCM_RNG; | |
| if (msr & UART_MSR_DSR) | |
| tiocm |= TIOCM_DSR; | |
| if (msr & UART_MSR_CTS) | |
| tiocm |= TIOCM_CTS; | |
| return tiocm; | |
| } | |
| static inline void serial8250_out_MCR(struct uart_8250_port *up, int value) | |
| { | |
| serial_out(up, UART_MCR, value); | |
| if (up->gpios) | |
| mctrl_gpio_set(up->gpios, serial8250_MCR_to_TIOCM(value)); | |
| } | |
| static inline int serial8250_in_MCR(struct uart_8250_port *up) | |
| { | |
| int mctrl; | |
| mctrl = serial_in(up, UART_MCR); | |
| if (up->gpios) { | |
| unsigned int mctrl_gpio = 0; | |
| mctrl_gpio = mctrl_gpio_get_outputs(up->gpios, &mctrl_gpio); | |
| mctrl |= serial8250_TIOCM_to_MCR(mctrl_gpio); | |
| } | |
| return mctrl; | |
| } | |
| #ifdef CONFIG_SERIAL_8250_PNP | |
| int serial8250_pnp_init(void); | |
| void serial8250_pnp_exit(void); | |
| #else | |
| static inline int serial8250_pnp_init(void) { return 0; } | |
| static inline void serial8250_pnp_exit(void) { } | |
| #endif | |
| #ifdef CONFIG_SERIAL_8250_RSA | |
| void univ8250_rsa_support(struct uart_ops *ops, const struct uart_ops *core_ops); | |
| void rsa_enable(struct uart_8250_port *up); | |
| void rsa_disable(struct uart_8250_port *up); | |
| void rsa_autoconfig(struct uart_8250_port *up); | |
| void rsa_reset(struct uart_8250_port *up); | |
| #else | |
| static inline void univ8250_rsa_support(struct uart_ops *ops, const struct uart_ops *core_ops) { } | |
| static inline void rsa_enable(struct uart_8250_port *up) {} | |
| static inline void rsa_disable(struct uart_8250_port *up) {} | |
| static inline void rsa_autoconfig(struct uart_8250_port *up) {} | |
| static inline void rsa_reset(struct uart_8250_port *up) {} | |
| #endif | |
| #ifdef CONFIG_SERIAL_8250_FINTEK | |
| int fintek_8250_probe(struct uart_8250_port *uart); | |
| #else | |
| static inline int fintek_8250_probe(struct uart_8250_port *uart) { return 0; } | |
| #endif | |
| #if IS_REACHABLE(CONFIG_SERIAL_8250_HUB6) | |
| bool hub6_match_port(const struct uart_port *port1, const struct uart_port *port2); | |
| #else | |
| static inline bool hub6_match_port(const struct uart_port *port1, const struct uart_port *port2) | |
| { return false; } | |
| #endif | |
| #ifdef CONFIG_ARCH_OMAP1 | |
| #include <linux/soc/ti/omap1-soc.h> | |
| static inline int is_omap1_8250(struct uart_8250_port *pt) | |
| { | |
| int res; | |
| switch (pt->port.mapbase) { | |
| case OMAP1_UART1_BASE: | |
| case OMAP1_UART2_BASE: | |
| case OMAP1_UART3_BASE: | |
| res = 1; | |
| break; | |
| default: | |
| res = 0; | |
| break; | |
| } | |
| return res; | |
| } | |
| static inline int is_omap1510_8250(struct uart_8250_port *pt) | |
| { | |
| if (!cpu_is_omap1510()) | |
| return 0; | |
| return is_omap1_8250(pt); | |
| } | |
| #else | |
| static inline int is_omap1_8250(struct uart_8250_port *pt) | |
| { | |
| return 0; | |
| } | |
| static inline int is_omap1510_8250(struct uart_8250_port *pt) | |
| { | |
| return 0; | |
| } | |
| #endif | |
| #ifdef CONFIG_SERIAL_8250_DMA | |
| extern int serial8250_tx_dma(struct uart_8250_port *); | |
| extern void serial8250_tx_dma_flush(struct uart_8250_port *); | |
| extern int serial8250_rx_dma(struct uart_8250_port *); | |
| extern void serial8250_rx_dma_flush(struct uart_8250_port *); | |
| extern int serial8250_request_dma(struct uart_8250_port *); | |
| extern void serial8250_release_dma(struct uart_8250_port *); | |
| static inline void serial8250_do_prepare_tx_dma(struct uart_8250_port *p) | |
| { | |
| struct uart_8250_dma *dma = p->dma; | |
| if (dma->prepare_tx_dma) | |
| dma->prepare_tx_dma(p); | |
| } | |
| static inline void serial8250_do_prepare_rx_dma(struct uart_8250_port *p) | |
| { | |
| struct uart_8250_dma *dma = p->dma; | |
| if (dma->prepare_rx_dma) | |
| dma->prepare_rx_dma(p); | |
| } | |
| static inline bool serial8250_tx_dma_running(struct uart_8250_port *p) | |
| { | |
| struct uart_8250_dma *dma = p->dma; | |
| return dma && dma->tx_running; | |
| } | |
| static inline void serial8250_tx_dma_pause(struct uart_8250_port *p) | |
| { | |
| struct uart_8250_dma *dma = p->dma; | |
| if (!dma->tx_running) | |
| return; | |
| dmaengine_pause(dma->txchan); | |
| } | |
| static inline void serial8250_tx_dma_resume(struct uart_8250_port *p) | |
| { | |
| struct uart_8250_dma *dma = p->dma; | |
| if (!dma->tx_running) | |
| return; | |
| dmaengine_resume(dma->txchan); | |
| } | |
| #else | |
| static inline int serial8250_tx_dma(struct uart_8250_port *p) | |
| { | |
| return -1; | |
| } | |
| static inline void serial8250_tx_dma_flush(struct uart_8250_port *p) { } | |
| static inline int serial8250_rx_dma(struct uart_8250_port *p) | |
| { | |
| return -1; | |
| } | |
| static inline void serial8250_rx_dma_flush(struct uart_8250_port *p) { } | |
| static inline int serial8250_request_dma(struct uart_8250_port *p) | |
| { | |
| return -1; | |
| } | |
| static inline void serial8250_release_dma(struct uart_8250_port *p) { } | |
| static inline bool serial8250_tx_dma_running(struct uart_8250_port *p) | |
| { | |
| return false; | |
| } | |
| static inline void serial8250_tx_dma_pause(struct uart_8250_port *p) { } | |
| static inline void serial8250_tx_dma_resume(struct uart_8250_port *p) { } | |
| #endif | |
| static inline int ns16550a_goto_highspeed(struct uart_8250_port *up) | |
| { | |
| unsigned char status; | |
| status = serial_in(up, 0x04); /* EXCR2 */ | |
| #define PRESL(x) ((x) & 0x30) | |
| if (PRESL(status) == 0x10) { | |
| /* already in high speed mode */ | |
| return 0; | |
| } else { | |
| status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */ | |
| status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */ | |
| serial_out(up, 0x04, status); | |
| } | |
| return 1; | |
| } | |
| static inline int serial_index(struct uart_port *port) | |
| { | |
| return port->minor - 64; | |
| } |