| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Altera SPI driver | |
| * | |
| * Copyright (C) 2008 Thomas Chou <thomas@wytron.com.tw> | |
| * | |
| * Based on spi_s3c24xx.c, which is: | |
| * Copyright (c) 2006 Ben Dooks | |
| * Copyright (c) 2006 Simtec Electronics | |
| * Ben Dooks <ben@simtec.co.uk> | |
| */ | |
| #include <linux/interrupt.h> | |
| #include <linux/errno.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/spi/altera.h> | |
| #include <linux/spi/spi.h> | |
| #include <linux/io.h> | |
| #include <linux/of.h> | |
| #define DRV_NAME "spi_altera" | |
| enum altera_spi_type { | |
| ALTERA_SPI_TYPE_UNKNOWN, | |
| ALTERA_SPI_TYPE_SUBDEV, | |
| }; | |
| static const struct regmap_config spi_altera_config = { | |
| .reg_bits = 32, | |
| .reg_stride = 4, | |
| .val_bits = 32, | |
| }; | |
| static int altera_spi_probe(struct platform_device *pdev) | |
| { | |
| const struct platform_device_id *platid = platform_get_device_id(pdev); | |
| struct altera_spi_platform_data *pdata = dev_get_platdata(&pdev->dev); | |
| enum altera_spi_type type = ALTERA_SPI_TYPE_UNKNOWN; | |
| struct altera_spi *hw; | |
| struct spi_controller *host; | |
| int err; | |
| u16 i; | |
| host = devm_spi_alloc_host(&pdev->dev, sizeof(struct altera_spi)); | |
| if (!host) | |
| return -ENOMEM; | |
| /* setup the host state. */ | |
| host->bus_num = -1; | |
| if (pdata) { | |
| if (pdata->num_chipselect > ALTERA_SPI_MAX_CS) { | |
| dev_err(&pdev->dev, | |
| "Invalid number of chipselect: %u\n", | |
| pdata->num_chipselect); | |
| return -EINVAL; | |
| } | |
| host->num_chipselect = pdata->num_chipselect; | |
| host->mode_bits = pdata->mode_bits; | |
| host->bits_per_word_mask = pdata->bits_per_word_mask; | |
| } else { | |
| host->num_chipselect = 16; | |
| host->mode_bits = SPI_CS_HIGH; | |
| host->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 16); | |
| } | |
| hw = spi_controller_get_devdata(host); | |
| hw->dev = &pdev->dev; | |
| if (platid) | |
| type = platid->driver_data; | |
| /* find and map our resources */ | |
| if (type == ALTERA_SPI_TYPE_SUBDEV) { | |
| struct resource *regoff; | |
| hw->regmap = dev_get_regmap(pdev->dev.parent, NULL); | |
| if (!hw->regmap) | |
| return dev_err_probe(&pdev->dev, -ENODEV, "get regmap failed\n"); | |
| regoff = platform_get_resource(pdev, IORESOURCE_REG, 0); | |
| if (regoff) | |
| hw->regoff = regoff->start; | |
| } else { | |
| void __iomem *res; | |
| res = devm_platform_ioremap_resource(pdev, 0); | |
| if (IS_ERR(res)) | |
| return PTR_ERR(res); | |
| hw->regmap = devm_regmap_init_mmio(&pdev->dev, res, | |
| &spi_altera_config); | |
| if (IS_ERR(hw->regmap)) | |
| return dev_err_probe(&pdev->dev, PTR_ERR(hw->regmap), | |
| "regmap mmio init failed\n"); | |
| } | |
| altera_spi_init_host(host); | |
| /* irq is optional */ | |
| hw->irq = platform_get_irq(pdev, 0); | |
| if (hw->irq >= 0) { | |
| err = devm_request_irq(&pdev->dev, hw->irq, altera_spi_irq, 0, | |
| pdev->name, host); | |
| if (err) | |
| return err; | |
| } | |
| err = devm_spi_register_controller(&pdev->dev, host); | |
| if (err) | |
| return err; | |
| if (pdata) { | |
| for (i = 0; i < pdata->num_devices; i++) { | |
| if (!spi_new_device(host, pdata->devices + i)) | |
| dev_warn(&pdev->dev, | |
| "unable to create SPI device: %s\n", | |
| pdata->devices[i].modalias); | |
| } | |
| } | |
| dev_info(&pdev->dev, "regoff %u, irq %d\n", hw->regoff, hw->irq); | |
| return 0; | |
| } | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id altera_spi_match[] = { | |
| { .compatible = "ALTR,spi-1.0", }, | |
| { .compatible = "altr,spi-1.0", }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, altera_spi_match); | |
| #endif /* CONFIG_OF */ | |
| static const struct platform_device_id altera_spi_ids[] = { | |
| { .name = DRV_NAME, .driver_data = ALTERA_SPI_TYPE_UNKNOWN }, | |
| { .name = "subdev_spi_altera", .driver_data = ALTERA_SPI_TYPE_SUBDEV }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(platform, altera_spi_ids); | |
| static struct platform_driver altera_spi_driver = { | |
| .probe = altera_spi_probe, | |
| .driver = { | |
| .name = DRV_NAME, | |
| .pm = NULL, | |
| .of_match_table = of_match_ptr(altera_spi_match), | |
| }, | |
| .id_table = altera_spi_ids, | |
| }; | |
| module_platform_driver(altera_spi_driver); | |
| MODULE_DESCRIPTION("Altera SPI driver"); | |
| MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>"); | |
| MODULE_LICENSE("GPL"); |