| // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) | |
| // Copyright(c) 2015-17 Intel Corporation. | |
| /* | |
| * MIPI Discovery And Configuration (DisCo) Specification for SoundWire | |
| * specifies properties to be implemented for SoundWire Masters and Slaves. | |
| * The DisCo spec doesn't mandate these properties. However, SDW bus cannot | |
| * work without knowing these values. | |
| * | |
| * The helper functions read the Master and Slave properties. Implementers | |
| * of Master or Slave drivers can use any of the below three mechanisms: | |
| * a) Use these APIs here as .read_prop() callback for Master and Slave | |
| * b) Implement own methods and set those as .read_prop(), but invoke | |
| * APIs in this file for generic read and override the values with | |
| * platform specific data | |
| * c) Implement ones own methods which do not use anything provided | |
| * here | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/property.h> | |
| #include <linux/soundwire/sdw.h> | |
| #include "bus.h" | |
| static bool mipi_fwnode_property_read_bool(const struct fwnode_handle *fwnode, | |
| const char *propname) | |
| { | |
| int ret; | |
| u8 val; | |
| if (!fwnode_property_present(fwnode, propname)) | |
| return false; | |
| ret = fwnode_property_read_u8_array(fwnode, propname, &val, 1); | |
| if (ret < 0) | |
| return false; | |
| return !!val; | |
| } | |
| static bool mipi_device_property_read_bool(const struct device *dev, | |
| const char *propname) | |
| { | |
| return mipi_fwnode_property_read_bool(dev_fwnode(dev), propname); | |
| } | |
| /** | |
| * sdw_master_read_prop() - Read Master properties | |
| * @bus: SDW bus instance | |
| */ | |
| int sdw_master_read_prop(struct sdw_bus *bus) | |
| { | |
| struct sdw_master_prop *prop = &bus->prop; | |
| struct fwnode_handle *link; | |
| const char *scales_prop; | |
| char name[32]; | |
| int nval; | |
| int ret; | |
| int i; | |
| device_property_read_u32(bus->dev, | |
| "mipi-sdw-sw-interface-revision", | |
| &prop->revision); | |
| /* Find master handle */ | |
| snprintf(name, sizeof(name), | |
| "mipi-sdw-link-%d-subproperties", bus->link_id); | |
| link = device_get_named_child_node(bus->dev, name); | |
| if (!link) { | |
| dev_err(bus->dev, "Master node %s not found\n", name); | |
| return -EIO; | |
| } | |
| if (mipi_fwnode_property_read_bool(link, | |
| "mipi-sdw-clock-stop-mode0-supported")) | |
| prop->clk_stop_modes |= BIT(SDW_CLK_STOP_MODE0); | |
| if (mipi_fwnode_property_read_bool(link, | |
| "mipi-sdw-clock-stop-mode1-supported")) | |
| prop->clk_stop_modes |= BIT(SDW_CLK_STOP_MODE1); | |
| fwnode_property_read_u32(link, | |
| "mipi-sdw-max-clock-frequency", | |
| &prop->max_clk_freq); | |
| nval = fwnode_property_count_u32(link, "mipi-sdw-clock-frequencies-supported"); | |
| if (nval > 0) { | |
| prop->num_clk_freq = nval; | |
| prop->clk_freq = devm_kcalloc(bus->dev, prop->num_clk_freq, | |
| sizeof(*prop->clk_freq), | |
| GFP_KERNEL); | |
| if (!prop->clk_freq) { | |
| fwnode_handle_put(link); | |
| return -ENOMEM; | |
| } | |
| ret = fwnode_property_read_u32_array(link, | |
| "mipi-sdw-clock-frequencies-supported", | |
| prop->clk_freq, prop->num_clk_freq); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| /* | |
| * Check the frequencies supported. If FW doesn't provide max | |
| * freq, then populate here by checking values. | |
| */ | |
| if (!prop->max_clk_freq && prop->clk_freq) { | |
| prop->max_clk_freq = prop->clk_freq[0]; | |
| for (i = 1; i < prop->num_clk_freq; i++) { | |
| if (prop->clk_freq[i] > prop->max_clk_freq) | |
| prop->max_clk_freq = prop->clk_freq[i]; | |
| } | |
| } | |
| scales_prop = "mipi-sdw-supported-clock-scales"; | |
| nval = fwnode_property_count_u32(link, scales_prop); | |
| if (nval == 0) { | |
| scales_prop = "mipi-sdw-supported-clock-gears"; | |
| nval = fwnode_property_count_u32(link, scales_prop); | |
| } | |
| if (nval > 0) { | |
| prop->num_clk_gears = nval; | |
| prop->clk_gears = devm_kcalloc(bus->dev, prop->num_clk_gears, | |
| sizeof(*prop->clk_gears), | |
| GFP_KERNEL); | |
| if (!prop->clk_gears) { | |
| fwnode_handle_put(link); | |
| return -ENOMEM; | |
| } | |
| ret = fwnode_property_read_u32_array(link, | |
| scales_prop, | |
| prop->clk_gears, | |
| prop->num_clk_gears); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| fwnode_property_read_u32(link, "mipi-sdw-default-frame-rate", | |
| &prop->default_frame_rate); | |
| fwnode_property_read_u32(link, "mipi-sdw-default-frame-row-size", | |
| &prop->default_row); | |
| fwnode_property_read_u32(link, "mipi-sdw-default-frame-col-size", | |
| &prop->default_col); | |
| prop->dynamic_frame = mipi_fwnode_property_read_bool(link, | |
| "mipi-sdw-dynamic-frame-shape"); | |
| fwnode_property_read_u32(link, "mipi-sdw-command-error-threshold", | |
| &prop->err_threshold); | |
| fwnode_handle_put(link); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(sdw_master_read_prop); | |
| static int sdw_slave_read_dp0(struct sdw_slave *slave, | |
| struct fwnode_handle *port, | |
| struct sdw_dp0_prop *dp0) | |
| { | |
| int nval; | |
| int ret; | |
| fwnode_property_read_u32(port, "mipi-sdw-port-max-wordlength", | |
| &dp0->max_word); | |
| fwnode_property_read_u32(port, "mipi-sdw-port-min-wordlength", | |
| &dp0->min_word); | |
| nval = fwnode_property_count_u32(port, "mipi-sdw-port-wordlength-configs"); | |
| if (nval > 0) { | |
| dp0->num_words = nval; | |
| dp0->words = devm_kcalloc(&slave->dev, | |
| dp0->num_words, sizeof(*dp0->words), | |
| GFP_KERNEL); | |
| if (!dp0->words) | |
| return -ENOMEM; | |
| ret = fwnode_property_read_u32_array(port, | |
| "mipi-sdw-port-wordlength-configs", | |
| dp0->words, dp0->num_words); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| dp0->BRA_flow_controlled = mipi_fwnode_property_read_bool(port, | |
| "mipi-sdw-bra-flow-controlled"); | |
| dp0->simple_ch_prep_sm = mipi_fwnode_property_read_bool(port, | |
| "mipi-sdw-simplified-channel-prepare-sm"); | |
| dp0->imp_def_interrupts = mipi_fwnode_property_read_bool(port, | |
| "mipi-sdw-imp-def-dp0-interrupts-supported"); | |
| nval = fwnode_property_count_u32(port, "mipi-sdw-lane-list"); | |
| if (nval > 0) { | |
| dp0->num_lanes = nval; | |
| dp0->lane_list = devm_kcalloc(&slave->dev, | |
| dp0->num_lanes, sizeof(*dp0->lane_list), | |
| GFP_KERNEL); | |
| if (!dp0->lane_list) | |
| return -ENOMEM; | |
| ret = fwnode_property_read_u32_array(port, | |
| "mipi-sdw-lane-list", | |
| dp0->lane_list, dp0->num_lanes); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int sdw_slave_read_dpn(struct sdw_slave *slave, | |
| struct sdw_dpn_prop *dpn, int count, int ports, | |
| char *type) | |
| { | |
| struct fwnode_handle *node; | |
| u32 bit, i = 0; | |
| unsigned long addr; | |
| char name[40]; | |
| int nval; | |
| int ret; | |
| addr = ports; | |
| /* valid ports are 1 to 14 so apply mask */ | |
| addr &= GENMASK(14, 1); | |
| for_each_set_bit(bit, &addr, 32) { | |
| snprintf(name, sizeof(name), | |
| "mipi-sdw-dp-%d-%s-subproperties", bit, type); | |
| dpn[i].num = bit; | |
| node = device_get_named_child_node(&slave->dev, name); | |
| if (!node) { | |
| dev_err(&slave->dev, "%s dpN not found\n", name); | |
| return -EIO; | |
| } | |
| fwnode_property_read_u32(node, "mipi-sdw-port-max-wordlength", | |
| &dpn[i].max_word); | |
| fwnode_property_read_u32(node, "mipi-sdw-port-min-wordlength", | |
| &dpn[i].min_word); | |
| nval = fwnode_property_count_u32(node, "mipi-sdw-port-wordlength-configs"); | |
| if (nval > 0) { | |
| dpn[i].num_words = nval; | |
| dpn[i].words = devm_kcalloc(&slave->dev, | |
| dpn[i].num_words, | |
| sizeof(*dpn[i].words), | |
| GFP_KERNEL); | |
| if (!dpn[i].words) { | |
| fwnode_handle_put(node); | |
| return -ENOMEM; | |
| } | |
| ret = fwnode_property_read_u32_array(node, | |
| "mipi-sdw-port-wordlength-configs", | |
| dpn[i].words, dpn[i].num_words); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| fwnode_property_read_u32(node, "mipi-sdw-data-port-type", | |
| &dpn[i].type); | |
| fwnode_property_read_u32(node, | |
| "mipi-sdw-max-grouping-supported", | |
| &dpn[i].max_grouping); | |
| dpn[i].simple_ch_prep_sm = mipi_fwnode_property_read_bool(node, | |
| "mipi-sdw-simplified-channelprepare-sm"); | |
| fwnode_property_read_u32(node, | |
| "mipi-sdw-port-channelprepare-timeout", | |
| &dpn[i].ch_prep_timeout); | |
| fwnode_property_read_u32(node, | |
| "mipi-sdw-imp-def-dpn-interrupts-supported", | |
| &dpn[i].imp_def_interrupts); | |
| fwnode_property_read_u32(node, "mipi-sdw-min-channel-number", | |
| &dpn[i].min_ch); | |
| fwnode_property_read_u32(node, "mipi-sdw-max-channel-number", | |
| &dpn[i].max_ch); | |
| nval = fwnode_property_count_u32(node, "mipi-sdw-channel-number-list"); | |
| if (nval > 0) { | |
| dpn[i].num_channels = nval; | |
| dpn[i].channels = devm_kcalloc(&slave->dev, | |
| dpn[i].num_channels, | |
| sizeof(*dpn[i].channels), | |
| GFP_KERNEL); | |
| if (!dpn[i].channels) { | |
| fwnode_handle_put(node); | |
| return -ENOMEM; | |
| } | |
| ret = fwnode_property_read_u32_array(node, | |
| "mipi-sdw-channel-number-list", | |
| dpn[i].channels, dpn[i].num_channels); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| nval = fwnode_property_count_u32(node, "mipi-sdw-channel-combination-list"); | |
| if (nval > 0) { | |
| dpn[i].num_ch_combinations = nval; | |
| dpn[i].ch_combinations = devm_kcalloc(&slave->dev, | |
| dpn[i].num_ch_combinations, | |
| sizeof(*dpn[i].ch_combinations), | |
| GFP_KERNEL); | |
| if (!dpn[i].ch_combinations) { | |
| fwnode_handle_put(node); | |
| return -ENOMEM; | |
| } | |
| ret = fwnode_property_read_u32_array(node, | |
| "mipi-sdw-channel-combination-list", | |
| dpn[i].ch_combinations, | |
| dpn[i].num_ch_combinations); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| fwnode_property_read_u32(node, | |
| "mipi-sdw-modes-supported", &dpn[i].modes); | |
| fwnode_property_read_u32(node, "mipi-sdw-max-async-buffer", | |
| &dpn[i].max_async_buffer); | |
| dpn[i].block_pack_mode = mipi_fwnode_property_read_bool(node, | |
| "mipi-sdw-block-packing-mode"); | |
| fwnode_property_read_u32(node, "mipi-sdw-port-encoding-type", | |
| &dpn[i].port_encoding); | |
| nval = fwnode_property_count_u32(node, "mipi-sdw-lane-list"); | |
| if (nval > 0) { | |
| dpn[i].num_lanes = nval; | |
| dpn[i].lane_list = devm_kcalloc(&slave->dev, | |
| dpn[i].num_lanes, sizeof(*dpn[i].lane_list), | |
| GFP_KERNEL); | |
| if (!dpn[i].lane_list) | |
| return -ENOMEM; | |
| ret = fwnode_property_read_u32_array(node, | |
| "mipi-sdw-lane-list", | |
| dpn[i].lane_list, dpn[i].num_lanes); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| fwnode_handle_put(node); | |
| i++; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * In MIPI DisCo spec for SoundWire, lane mapping for a slave device is done with | |
| * mipi-sdw-lane-x-mapping properties, where x is 1..7, and the values for those | |
| * properties are mipi-sdw-manager-lane-x or mipi-sdw-peripheral-link-y, where x | |
| * is an integer between 1 to 7 if the lane is connected to a manager lane, y is a | |
| * character between A to E if the lane is connected to another peripheral lane. | |
| */ | |
| int sdw_slave_read_lane_mapping(struct sdw_slave *slave) | |
| { | |
| struct sdw_slave_prop *prop = &slave->prop; | |
| struct device *dev = &slave->dev; | |
| char prop_name[30]; | |
| const char *prop_val; | |
| size_t len; | |
| int ret, i; | |
| u8 lane; | |
| for (i = 0; i < SDW_MAX_LANES; i++) { | |
| snprintf(prop_name, sizeof(prop_name), "mipi-sdw-lane-%d-mapping", i); | |
| ret = device_property_read_string(dev, prop_name, &prop_val); | |
| if (ret) | |
| continue; | |
| len = strlen(prop_val); | |
| if (len < 1) | |
| return -EINVAL; | |
| /* The last character is enough to identify the connection */ | |
| ret = kstrtou8(&prop_val[len - 1], 10, &lane); | |
| if (ret) | |
| return ret; | |
| if (in_range(lane, 1, SDW_MAX_LANES - 1)) | |
| prop->lane_maps[i] = lane; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(sdw_slave_read_lane_mapping); | |
| /** | |
| * sdw_slave_read_prop() - Read Slave properties | |
| * @slave: SDW Slave | |
| */ | |
| int sdw_slave_read_prop(struct sdw_slave *slave) | |
| { | |
| struct sdw_slave_prop *prop = &slave->prop; | |
| struct device *dev = &slave->dev; | |
| struct fwnode_handle *port; | |
| int nval; | |
| int ret; | |
| device_property_read_u32(dev, "mipi-sdw-sw-interface-revision", | |
| &prop->mipi_revision); | |
| prop->wake_capable = mipi_device_property_read_bool(dev, | |
| "mipi-sdw-wake-up-unavailable"); | |
| prop->wake_capable = !prop->wake_capable; | |
| prop->test_mode_capable = mipi_device_property_read_bool(dev, | |
| "mipi-sdw-test-mode-supported"); | |
| prop->clk_stop_mode1 = false; | |
| if (mipi_device_property_read_bool(dev, | |
| "mipi-sdw-clock-stop-mode1-supported")) | |
| prop->clk_stop_mode1 = true; | |
| prop->simple_clk_stop_capable = mipi_device_property_read_bool(dev, | |
| "mipi-sdw-simplified-clockstopprepare-sm-supported"); | |
| device_property_read_u32(dev, "mipi-sdw-clockstopprepare-timeout", | |
| &prop->clk_stop_timeout); | |
| ret = device_property_read_u32(dev, "mipi-sdw-peripheral-channelprepare-timeout", | |
| &prop->ch_prep_timeout); | |
| if (ret < 0) | |
| device_property_read_u32(dev, "mipi-sdw-slave-channelprepare-timeout", | |
| &prop->ch_prep_timeout); | |
| device_property_read_u32(dev, | |
| "mipi-sdw-clockstopprepare-hard-reset-behavior", | |
| &prop->reset_behave); | |
| prop->high_PHY_capable = mipi_device_property_read_bool(dev, | |
| "mipi-sdw-highPHY-capable"); | |
| prop->paging_support = mipi_device_property_read_bool(dev, | |
| "mipi-sdw-paging-supported"); | |
| prop->bank_delay_support = mipi_device_property_read_bool(dev, | |
| "mipi-sdw-bank-delay-supported"); | |
| device_property_read_u32(dev, | |
| "mipi-sdw-port15-read-behavior", &prop->p15_behave); | |
| device_property_read_u32(dev, "mipi-sdw-master-count", | |
| &prop->master_count); | |
| device_property_read_u32(dev, "mipi-sdw-source-port-list", | |
| &prop->source_ports); | |
| device_property_read_u32(dev, "mipi-sdw-sink-port-list", | |
| &prop->sink_ports); | |
| device_property_read_u32(dev, "mipi-sdw-sdca-interrupt-register-list", | |
| &prop->sdca_interrupt_register_list); | |
| device_property_read_u32(dev, "mipi-sdw-bra-mode-block-alignment", | |
| &prop->bra_block_alignment); | |
| device_property_read_u32(dev, "mipi-sdw-bra-mode-max-data-per-frame", | |
| &prop->bra_max_data_per_frame); | |
| prop->commit_register_supported = mipi_device_property_read_bool(dev, | |
| "mipi-sdw-commit-register-supported"); | |
| /* | |
| * Read dp0 properties - we don't rely on the 'mipi-sdw-dp-0-supported' | |
| * property since the 'mipi-sdw-dp0-subproperties' property is logically | |
| * equivalent. | |
| */ | |
| port = device_get_named_child_node(dev, "mipi-sdw-dp-0-subproperties"); | |
| if (!port) { | |
| dev_dbg(dev, "DP0 node not found!!\n"); | |
| } else { | |
| prop->dp0_prop = devm_kzalloc(&slave->dev, | |
| sizeof(*prop->dp0_prop), | |
| GFP_KERNEL); | |
| if (!prop->dp0_prop) { | |
| fwnode_handle_put(port); | |
| return -ENOMEM; | |
| } | |
| sdw_slave_read_dp0(slave, port, prop->dp0_prop); | |
| fwnode_handle_put(port); | |
| } | |
| /* | |
| * Based on each DPn port, get source and sink dpn properties. | |
| * Also, some ports can operate as both source or sink. | |
| */ | |
| /* Allocate memory for set bits in port lists */ | |
| nval = hweight32(prop->source_ports); | |
| prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, | |
| sizeof(*prop->src_dpn_prop), | |
| GFP_KERNEL); | |
| if (!prop->src_dpn_prop) | |
| return -ENOMEM; | |
| /* Read dpn properties for source port(s) */ | |
| sdw_slave_read_dpn(slave, prop->src_dpn_prop, nval, | |
| prop->source_ports, "source"); | |
| nval = hweight32(prop->sink_ports); | |
| prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, | |
| sizeof(*prop->sink_dpn_prop), | |
| GFP_KERNEL); | |
| if (!prop->sink_dpn_prop) | |
| return -ENOMEM; | |
| /* Read dpn properties for sink port(s) */ | |
| sdw_slave_read_dpn(slave, prop->sink_dpn_prop, nval, | |
| prop->sink_ports, "sink"); | |
| return sdw_slave_read_lane_mapping(slave); | |
| } | |
| EXPORT_SYMBOL(sdw_slave_read_prop); |