| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (C) 2014 NVIDIA CORPORATION. All rights reserved. | |
| */ | |
| #define dev_fmt(fmt) "tegra-soc: " fmt | |
| #include <linux/clk.h> | |
| #include <linux/device.h> | |
| #include <linux/export.h> | |
| #include <linux/of.h> | |
| #include <linux/pm_opp.h> | |
| #include <linux/pm_runtime.h> | |
| #include <soc/tegra/common.h> | |
| #include <soc/tegra/fuse.h> | |
| static const struct of_device_id tegra_machine_match[] = { | |
| { .compatible = "nvidia,tegra20", }, | |
| { .compatible = "nvidia,tegra30", }, | |
| { .compatible = "nvidia,tegra114", }, | |
| { .compatible = "nvidia,tegra124", }, | |
| { .compatible = "nvidia,tegra132", }, | |
| { .compatible = "nvidia,tegra210", }, | |
| { } | |
| }; | |
| bool soc_is_tegra(void) | |
| { | |
| return of_machine_device_match(tegra_machine_match); | |
| } | |
| static int tegra_core_dev_init_opp_state(struct device *dev) | |
| { | |
| unsigned long rate; | |
| struct clk *clk; | |
| bool rpm_enabled; | |
| int err; | |
| clk = devm_clk_get(dev, NULL); | |
| if (IS_ERR(clk)) { | |
| dev_err(dev, "failed to get clk: %pe\n", clk); | |
| return PTR_ERR(clk); | |
| } | |
| rate = clk_get_rate(clk); | |
| if (!rate) { | |
| dev_err(dev, "failed to get clk rate\n"); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Runtime PM of the device must be enabled in order to set up | |
| * GENPD's performance properly because GENPD core checks whether | |
| * device is suspended and this check doesn't work while RPM is | |
| * disabled. This makes sure the OPP vote below gets cached in | |
| * GENPD for the device. Instead, the vote is done the next time | |
| * the device gets runtime resumed. | |
| */ | |
| rpm_enabled = pm_runtime_enabled(dev); | |
| if (!rpm_enabled) | |
| pm_runtime_enable(dev); | |
| /* should never happen in practice */ | |
| if (!pm_runtime_enabled(dev)) { | |
| dev_WARN(dev, "failed to enable runtime PM\n"); | |
| pm_runtime_disable(dev); | |
| return -EINVAL; | |
| } | |
| /* first dummy rate-setting initializes voltage vote */ | |
| err = dev_pm_opp_set_rate(dev, rate); | |
| if (!rpm_enabled) | |
| pm_runtime_disable(dev); | |
| if (err) { | |
| dev_err(dev, "failed to initialize OPP clock: %d\n", err); | |
| return err; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * devm_tegra_core_dev_init_opp_table() - initialize OPP table | |
| * @dev: device for which OPP table is initialized | |
| * @params: pointer to the OPP table configuration | |
| * | |
| * This function will initialize OPP table and sync OPP state of a Tegra SoC | |
| * core device. | |
| * | |
| * Return: 0 on success or errorno. | |
| */ | |
| int devm_tegra_core_dev_init_opp_table(struct device *dev, | |
| struct tegra_core_opp_params *params) | |
| { | |
| u32 hw_version; | |
| int err; | |
| /* | |
| * The clk's connection id to set is NULL and this is a NULL terminated | |
| * array, hence two NULL entries. | |
| */ | |
| const char *clk_names[] = { NULL, NULL }; | |
| struct dev_pm_opp_config config = { | |
| /* | |
| * For some devices we don't have any OPP table in the DT, and | |
| * in order to use the same code path for all the devices, we | |
| * create a dummy OPP table for them via this. The dummy OPP | |
| * table is only capable of doing clk_set_rate() on invocation | |
| * of dev_pm_opp_set_rate() and doesn't provide any other | |
| * functionality. | |
| */ | |
| .clk_names = clk_names, | |
| }; | |
| if (of_machine_is_compatible("nvidia,tegra20")) { | |
| hw_version = BIT(tegra_sku_info.soc_process_id); | |
| config.supported_hw = &hw_version; | |
| config.supported_hw_count = 1; | |
| } else if (of_machine_is_compatible("nvidia,tegra30") || | |
| of_machine_is_compatible("nvidia,tegra114")) { | |
| hw_version = BIT(tegra_sku_info.soc_speedo_id); | |
| config.supported_hw = &hw_version; | |
| config.supported_hw_count = 1; | |
| } | |
| err = devm_pm_opp_set_config(dev, &config); | |
| if (err) { | |
| dev_err(dev, "failed to set OPP config: %d\n", err); | |
| return err; | |
| } | |
| /* | |
| * Tegra124+ doesn't support OPP yet, return early for pre-Tegra124 | |
| * case. | |
| */ | |
| if (!config.supported_hw) | |
| return -ENODEV; | |
| /* | |
| * Older device-trees have an empty OPP table, we will get | |
| * -ENODEV from devm_pm_opp_of_add_table() in this case. | |
| */ | |
| err = devm_pm_opp_of_add_table(dev); | |
| if (err) { | |
| if (err != -ENODEV) | |
| dev_err(dev, "failed to add OPP table: %d\n", err); | |
| return err; | |
| } | |
| if (params->init_state) { | |
| err = tegra_core_dev_init_opp_state(dev); | |
| if (err) | |
| return err; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(devm_tegra_core_dev_init_opp_table); |