| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * The On Chip Memory (OCMEM) allocator allows various clients to allocate | |
| * memory from OCMEM based on performance, latency and power requirements. | |
| * This is typically used by the GPU, camera/video, and audio components on | |
| * some Snapdragon SoCs. | |
| * | |
| * Copyright (C) 2019 Brian Masney <masneyb@onstation.org> | |
| * Copyright (C) 2015 Red Hat. Author: Rob Clark <robdclark@gmail.com> | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/cleanup.h> | |
| #include <linux/clk.h> | |
| #include <linux/io.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/firmware/qcom/qcom_scm.h> | |
| #include <linux/sizes.h> | |
| #include <linux/slab.h> | |
| #include <linux/types.h> | |
| #include <soc/qcom/ocmem.h> | |
| enum region_mode { | |
| WIDE_MODE = 0x0, | |
| THIN_MODE, | |
| MODE_DEFAULT = WIDE_MODE, | |
| }; | |
| enum ocmem_macro_state { | |
| PASSTHROUGH = 0, | |
| PERI_ON = 1, | |
| CORE_ON = 2, | |
| CLK_OFF = 4, | |
| }; | |
| struct ocmem_region { | |
| bool interleaved; | |
| enum region_mode mode; | |
| unsigned int num_macros; | |
| enum ocmem_macro_state macro_state[4]; | |
| unsigned long macro_size; | |
| unsigned long region_size; | |
| }; | |
| struct ocmem_config { | |
| uint8_t num_regions; | |
| unsigned long macro_size; | |
| }; | |
| struct ocmem { | |
| struct device *dev; | |
| const struct ocmem_config *config; | |
| struct resource *memory; | |
| void __iomem *mmio; | |
| struct clk *core_clk; | |
| struct clk *iface_clk; | |
| unsigned int num_ports; | |
| unsigned int num_macros; | |
| bool interleaved; | |
| struct ocmem_region *regions; | |
| unsigned long active_allocations; | |
| }; | |
| #define OCMEM_MIN_ALIGN SZ_64K | |
| #define OCMEM_MIN_ALLOC SZ_64K | |
| #define OCMEM_REG_HW_VERSION 0x00000000 | |
| #define OCMEM_REG_HW_PROFILE 0x00000004 | |
| #define OCMEM_REG_REGION_MODE_CTL 0x00001000 | |
| #define OCMEM_REGION_MODE_CTL_REG0_THIN 0x00000001 | |
| #define OCMEM_REGION_MODE_CTL_REG1_THIN 0x00000002 | |
| #define OCMEM_REGION_MODE_CTL_REG2_THIN 0x00000004 | |
| #define OCMEM_REGION_MODE_CTL_REG3_THIN 0x00000008 | |
| #define OCMEM_REG_GFX_MPU_START 0x00001004 | |
| #define OCMEM_REG_GFX_MPU_END 0x00001008 | |
| #define OCMEM_HW_VERSION_MAJOR(val) FIELD_GET(GENMASK(31, 28), val) | |
| #define OCMEM_HW_VERSION_MINOR(val) FIELD_GET(GENMASK(27, 16), val) | |
| #define OCMEM_HW_VERSION_STEP(val) FIELD_GET(GENMASK(15, 0), val) | |
| #define OCMEM_HW_PROFILE_NUM_PORTS(val) FIELD_GET(0x0000000f, (val)) | |
| #define OCMEM_HW_PROFILE_NUM_MACROS(val) FIELD_GET(0x00003f00, (val)) | |
| #define OCMEM_HW_PROFILE_LAST_REGN_HALFSIZE 0x00010000 | |
| #define OCMEM_HW_PROFILE_INTERLEAVING 0x00020000 | |
| #define OCMEM_REG_GEN_STATUS 0x0000000c | |
| #define OCMEM_REG_PSGSC_STATUS 0x00000038 | |
| #define OCMEM_REG_PSGSC_CTL(i0) (0x0000003c + 0x1*(i0)) | |
| #define OCMEM_PSGSC_CTL_MACRO0_MODE(val) FIELD_PREP(0x00000007, (val)) | |
| #define OCMEM_PSGSC_CTL_MACRO1_MODE(val) FIELD_PREP(0x00000070, (val)) | |
| #define OCMEM_PSGSC_CTL_MACRO2_MODE(val) FIELD_PREP(0x00000700, (val)) | |
| #define OCMEM_PSGSC_CTL_MACRO3_MODE(val) FIELD_PREP(0x00007000, (val)) | |
| static inline void ocmem_write(struct ocmem *ocmem, u32 reg, u32 data) | |
| { | |
| writel(data, ocmem->mmio + reg); | |
| } | |
| static inline u32 ocmem_read(struct ocmem *ocmem, u32 reg) | |
| { | |
| return readl(ocmem->mmio + reg); | |
| } | |
| static void update_ocmem(struct ocmem *ocmem) | |
| { | |
| uint32_t region_mode_ctrl = 0x0; | |
| int i; | |
| if (!qcom_scm_ocmem_lock_available()) { | |
| for (i = 0; i < ocmem->config->num_regions; i++) { | |
| struct ocmem_region *region = &ocmem->regions[i]; | |
| if (region->mode == THIN_MODE) | |
| region_mode_ctrl |= BIT(i); | |
| } | |
| dev_dbg(ocmem->dev, "ocmem_region_mode_control %x\n", | |
| region_mode_ctrl); | |
| ocmem_write(ocmem, OCMEM_REG_REGION_MODE_CTL, region_mode_ctrl); | |
| } | |
| for (i = 0; i < ocmem->config->num_regions; i++) { | |
| struct ocmem_region *region = &ocmem->regions[i]; | |
| u32 data; | |
| data = OCMEM_PSGSC_CTL_MACRO0_MODE(region->macro_state[0]) | | |
| OCMEM_PSGSC_CTL_MACRO1_MODE(region->macro_state[1]) | | |
| OCMEM_PSGSC_CTL_MACRO2_MODE(region->macro_state[2]) | | |
| OCMEM_PSGSC_CTL_MACRO3_MODE(region->macro_state[3]); | |
| ocmem_write(ocmem, OCMEM_REG_PSGSC_CTL(i), data); | |
| } | |
| } | |
| static unsigned long phys_to_offset(struct ocmem *ocmem, | |
| unsigned long addr) | |
| { | |
| if (addr < ocmem->memory->start || addr >= ocmem->memory->end) | |
| return 0; | |
| return addr - ocmem->memory->start; | |
| } | |
| static unsigned long device_address(struct ocmem *ocmem, | |
| enum ocmem_client client, | |
| unsigned long addr) | |
| { | |
| WARN_ON(client != OCMEM_GRAPHICS); | |
| /* TODO: gpu uses phys_to_offset, but others do not.. */ | |
| return phys_to_offset(ocmem, addr); | |
| } | |
| static void update_range(struct ocmem *ocmem, struct ocmem_buf *buf, | |
| enum ocmem_macro_state mstate, enum region_mode rmode) | |
| { | |
| unsigned long offset = 0; | |
| int i, j; | |
| for (i = 0; i < ocmem->config->num_regions; i++) { | |
| struct ocmem_region *region = &ocmem->regions[i]; | |
| if (buf->offset <= offset && offset < buf->offset + buf->len) | |
| region->mode = rmode; | |
| for (j = 0; j < region->num_macros; j++) { | |
| if (buf->offset <= offset && | |
| offset < buf->offset + buf->len) | |
| region->macro_state[j] = mstate; | |
| offset += region->macro_size; | |
| } | |
| } | |
| update_ocmem(ocmem); | |
| } | |
| struct ocmem *of_get_ocmem(struct device *dev) | |
| { | |
| struct platform_device *pdev; | |
| struct ocmem *ocmem; | |
| struct device_node *devnode __free(device_node) = of_parse_phandle(dev->of_node, | |
| "sram", 0); | |
| if (!devnode || !devnode->parent) { | |
| dev_err(dev, "Cannot look up sram phandle\n"); | |
| return ERR_PTR(-ENODEV); | |
| } | |
| pdev = of_find_device_by_node(devnode->parent); | |
| if (!pdev) | |
| return dev_err_ptr_probe(dev, -EPROBE_DEFER, | |
| "Cannot find device node %s\n", | |
| devnode->name); | |
| ocmem = platform_get_drvdata(pdev); | |
| put_device(&pdev->dev); | |
| if (!ocmem) | |
| return dev_err_ptr_probe(dev, -EPROBE_DEFER, "Cannot get ocmem\n"); | |
| return ocmem; | |
| } | |
| EXPORT_SYMBOL_GPL(of_get_ocmem); | |
| struct ocmem_buf *ocmem_allocate(struct ocmem *ocmem, enum ocmem_client client, | |
| unsigned long size) | |
| { | |
| int ret; | |
| /* TODO: add support for other clients... */ | |
| if (WARN_ON(client != OCMEM_GRAPHICS)) | |
| return ERR_PTR(-ENODEV); | |
| if (size < OCMEM_MIN_ALLOC || !IS_ALIGNED(size, OCMEM_MIN_ALIGN)) | |
| return ERR_PTR(-EINVAL); | |
| if (test_and_set_bit_lock(BIT(client), &ocmem->active_allocations)) | |
| return ERR_PTR(-EBUSY); | |
| struct ocmem_buf *buf __free(kfree) = kzalloc_obj(*buf); | |
| if (!buf) { | |
| ret = -ENOMEM; | |
| goto err_unlock; | |
| } | |
| buf->offset = 0; | |
| buf->addr = device_address(ocmem, client, buf->offset); | |
| buf->len = size; | |
| update_range(ocmem, buf, CORE_ON, WIDE_MODE); | |
| if (qcom_scm_ocmem_lock_available()) { | |
| ret = qcom_scm_ocmem_lock(QCOM_SCM_OCMEM_GRAPHICS_ID, | |
| buf->offset, buf->len, WIDE_MODE); | |
| if (ret) { | |
| dev_err(ocmem->dev, "could not lock: %d\n", ret); | |
| ret = -EINVAL; | |
| goto err_unlock; | |
| } | |
| } else { | |
| ocmem_write(ocmem, OCMEM_REG_GFX_MPU_START, buf->offset); | |
| ocmem_write(ocmem, OCMEM_REG_GFX_MPU_END, | |
| buf->offset + buf->len); | |
| } | |
| dev_dbg(ocmem->dev, "using %ldK of OCMEM at 0x%08lx for client %d\n", | |
| size / 1024, buf->addr, client); | |
| return_ptr(buf); | |
| err_unlock: | |
| clear_bit_unlock(BIT(client), &ocmem->active_allocations); | |
| return ERR_PTR(ret); | |
| } | |
| EXPORT_SYMBOL_GPL(ocmem_allocate); | |
| void ocmem_free(struct ocmem *ocmem, enum ocmem_client client, | |
| struct ocmem_buf *buf) | |
| { | |
| /* TODO: add support for other clients... */ | |
| if (WARN_ON(client != OCMEM_GRAPHICS)) | |
| return; | |
| update_range(ocmem, buf, CLK_OFF, MODE_DEFAULT); | |
| if (qcom_scm_ocmem_lock_available()) { | |
| int ret; | |
| ret = qcom_scm_ocmem_unlock(QCOM_SCM_OCMEM_GRAPHICS_ID, | |
| buf->offset, buf->len); | |
| if (ret) | |
| dev_err(ocmem->dev, "could not unlock: %d\n", ret); | |
| } else { | |
| ocmem_write(ocmem, OCMEM_REG_GFX_MPU_START, 0x0); | |
| ocmem_write(ocmem, OCMEM_REG_GFX_MPU_END, 0x0); | |
| } | |
| kfree(buf); | |
| clear_bit_unlock(BIT(client), &ocmem->active_allocations); | |
| } | |
| EXPORT_SYMBOL_GPL(ocmem_free); | |
| static int ocmem_dev_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| unsigned long reg, region_size; | |
| int i, j, ret, num_banks; | |
| struct ocmem *ocmem; | |
| if (!qcom_scm_is_available()) | |
| return -EPROBE_DEFER; | |
| ocmem = devm_kzalloc(dev, sizeof(*ocmem), GFP_KERNEL); | |
| if (!ocmem) | |
| return -ENOMEM; | |
| ocmem->dev = dev; | |
| ocmem->config = device_get_match_data(dev); | |
| ocmem->core_clk = devm_clk_get_optional(dev, "core"); | |
| if (IS_ERR(ocmem->core_clk)) | |
| return dev_err_probe(dev, PTR_ERR(ocmem->core_clk), | |
| "Unable to get core clock\n"); | |
| ocmem->iface_clk = devm_clk_get_optional(dev, "iface"); | |
| if (IS_ERR(ocmem->iface_clk)) | |
| return dev_err_probe(dev, PTR_ERR(ocmem->iface_clk), | |
| "Unable to get iface clock\n"); | |
| ocmem->mmio = devm_platform_ioremap_resource_byname(pdev, "ctrl"); | |
| if (IS_ERR(ocmem->mmio)) | |
| return dev_err_probe(&pdev->dev, PTR_ERR(ocmem->mmio), | |
| "Failed to ioremap ocmem_ctrl resource\n"); | |
| ocmem->memory = platform_get_resource_byname(pdev, IORESOURCE_MEM, | |
| "mem"); | |
| if (!ocmem->memory) { | |
| dev_err(dev, "Could not get mem region\n"); | |
| return -ENXIO; | |
| } | |
| /* The core clock is synchronous with graphics */ | |
| WARN_ON(clk_set_rate(ocmem->core_clk, 1000) < 0); | |
| ret = clk_prepare_enable(ocmem->core_clk); | |
| if (ret) | |
| return dev_err_probe(ocmem->dev, ret, "Failed to enable core clock\n"); | |
| ret = clk_prepare_enable(ocmem->iface_clk); | |
| if (ret) { | |
| clk_disable_unprepare(ocmem->core_clk); | |
| return dev_err_probe(ocmem->dev, ret, "Failed to enable iface clock\n"); | |
| } | |
| if (qcom_scm_restore_sec_cfg_available()) { | |
| dev_dbg(dev, "configuring scm\n"); | |
| ret = qcom_scm_restore_sec_cfg(QCOM_SCM_OCMEM_DEV_ID, 0); | |
| if (ret) { | |
| dev_err_probe(dev, ret, "Could not enable secure configuration\n"); | |
| goto err_clk_disable; | |
| } | |
| } | |
| reg = ocmem_read(ocmem, OCMEM_REG_HW_VERSION); | |
| dev_dbg(dev, "OCMEM hardware version: %lu.%lu.%lu\n", | |
| OCMEM_HW_VERSION_MAJOR(reg), | |
| OCMEM_HW_VERSION_MINOR(reg), | |
| OCMEM_HW_VERSION_STEP(reg)); | |
| reg = ocmem_read(ocmem, OCMEM_REG_HW_PROFILE); | |
| ocmem->num_ports = OCMEM_HW_PROFILE_NUM_PORTS(reg); | |
| ocmem->num_macros = OCMEM_HW_PROFILE_NUM_MACROS(reg); | |
| ocmem->interleaved = !!(reg & OCMEM_HW_PROFILE_INTERLEAVING); | |
| num_banks = ocmem->num_ports / 2; | |
| region_size = ocmem->config->macro_size * num_banks; | |
| dev_info(dev, "%u ports, %u regions, %u macros, %sinterleaved\n", | |
| ocmem->num_ports, ocmem->config->num_regions, | |
| ocmem->num_macros, ocmem->interleaved ? "" : "not "); | |
| ocmem->regions = devm_kcalloc(dev, ocmem->config->num_regions, | |
| sizeof(struct ocmem_region), GFP_KERNEL); | |
| if (!ocmem->regions) { | |
| ret = -ENOMEM; | |
| goto err_clk_disable; | |
| } | |
| for (i = 0; i < ocmem->config->num_regions; i++) { | |
| struct ocmem_region *region = &ocmem->regions[i]; | |
| if (WARN_ON(num_banks > ARRAY_SIZE(region->macro_state))) { | |
| ret = -EINVAL; | |
| goto err_clk_disable; | |
| } | |
| region->mode = MODE_DEFAULT; | |
| region->num_macros = num_banks; | |
| if (i == (ocmem->config->num_regions - 1) && | |
| reg & OCMEM_HW_PROFILE_LAST_REGN_HALFSIZE) { | |
| region->macro_size = ocmem->config->macro_size / 2; | |
| region->region_size = region_size / 2; | |
| } else { | |
| region->macro_size = ocmem->config->macro_size; | |
| region->region_size = region_size; | |
| } | |
| for (j = 0; j < ARRAY_SIZE(region->macro_state); j++) | |
| region->macro_state[j] = CLK_OFF; | |
| } | |
| platform_set_drvdata(pdev, ocmem); | |
| return 0; | |
| err_clk_disable: | |
| clk_disable_unprepare(ocmem->core_clk); | |
| clk_disable_unprepare(ocmem->iface_clk); | |
| return ret; | |
| } | |
| static void ocmem_dev_remove(struct platform_device *pdev) | |
| { | |
| struct ocmem *ocmem = platform_get_drvdata(pdev); | |
| clk_disable_unprepare(ocmem->core_clk); | |
| clk_disable_unprepare(ocmem->iface_clk); | |
| } | |
| static const struct ocmem_config ocmem_8226_config = { | |
| .num_regions = 1, | |
| .macro_size = SZ_128K, | |
| }; | |
| static const struct ocmem_config ocmem_8974_config = { | |
| .num_regions = 3, | |
| .macro_size = SZ_128K, | |
| }; | |
| static const struct of_device_id ocmem_of_match[] = { | |
| { .compatible = "qcom,msm8226-ocmem", .data = &ocmem_8226_config }, | |
| { .compatible = "qcom,msm8974-ocmem", .data = &ocmem_8974_config }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, ocmem_of_match); | |
| static struct platform_driver ocmem_driver = { | |
| .probe = ocmem_dev_probe, | |
| .remove = ocmem_dev_remove, | |
| .driver = { | |
| .name = "ocmem", | |
| .of_match_table = ocmem_of_match, | |
| }, | |
| }; | |
| module_platform_driver(ocmem_driver); | |
| MODULE_DESCRIPTION("On Chip Memory (OCMEM) allocator for some Snapdragon SoCs"); | |
| MODULE_LICENSE("GPL v2"); |