drivers/scsi/scsi.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 *  scsi.c Copyright (C) 1992 Drew Eckhardt
 *         Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
 *         Copyright (C) 2002, 2003 Christoph Hellwig
 *
 *  generic mid-level SCSI driver
 *      Initial versions: Drew Eckhardt
 *      Subsequent revisions: Eric Youngdale
 *
 *  <drew@colorado.edu>
 *
 *  Bug correction thanks go to :
 *      Rik Faith <faith@cs.unc.edu>
 *      Tommy Thorn <tthorn>
 *      Thomas Wuensche <tw@fgb1.fgb.mw.tu-muenchen.de>
 *
 *  Modified by Eric Youngdale eric@andante.org or ericy@gnu.ai.mit.edu to
 *  add scatter-gather, multiple outstanding request, and other
 *  enhancements.
 *
 *  Native multichannel, wide scsi, /proc/scsi and hot plugging
 *  support added by Michael Neuffer <mike@i-connect.net>
 *
 *  Added request_module("scsi_hostadapter") for kerneld:
 *  (Put an "alias scsi_hostadapter your_hostadapter" in /etc/modprobe.conf)
 *  Bjorn Ekwall  <bj0rn@blox.se>
 *  (changed to kmod)
 *
 *  Major improvements to the timeout, abort, and reset processing,
 *  as well as performance modifications for large queue depths by
 *  Leonard N. Zubkoff <lnz@dandelion.com>
 *
 *  Converted cli() code to spinlocks, Ingo Molnar
 *
 *  Jiffies wrap fixes (host->resetting), 3 Dec 1998 Andrea Arcangeli
 *
 *  out_of_space hacks, D. Gilbert (dpg) 990608
 */

#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/completion.h>
#include <linux/unistd.h>
#include <linux/spinlock.h>
#include <linux/kmod.h>
#include <linux/interrupt.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/mutex.h>
#include <linux/unaligned.h>

#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_driver.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>

#include "scsi_priv.h"
#include "scsi_logging.h"

#define CREATE_TRACE_POINTS
#include <trace/events/scsi.h>

/*
 * Definitions and constants.
 */

/*
 * Note - the initial logging level can be set here to log events at boot time.
 * After the system is up, you may enable logging via the /proc interface.
 */
unsigned int scsi_logging_level;
#if defined(CONFIG_SCSI_LOGGING)
EXPORT_SYMBOL(scsi_logging_level);
#endif

#ifdef CONFIG_SCSI_LOGGING
void scsi_log_send(struct scsi_cmnd *cmd)
{
	unsigned int level;

	/*
	 * If ML QUEUE log level is greater than or equal to:
	 *
	 * 1: nothing (match completion)
	 *
	 * 2: log opcode + command of all commands + cmd address
	 *
	 * 3: same as 2
	 *
	 * 4: same as 3
	 */
	if (unlikely(scsi_logging_level)) {
		level = SCSI_LOG_LEVEL(SCSI_LOG_MLQUEUE_SHIFT,
				       SCSI_LOG_MLQUEUE_BITS);
		if (level > 1) {
			scmd_printk(KERN_INFO, cmd,
				    "Send: scmd 0x%p\n", cmd);
			scsi_print_command(cmd);
		}
	}
}

void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
{
	unsigned int level;

	/*
	 * If ML COMPLETE log level is greater than or equal to:
	 *
	 * 1: log disposition, result, opcode + command, and conditionally
	 * sense data for failures or non SUCCESS dispositions.
	 *
	 * 2: same as 1 but for all command completions.
	 *
	 * 3: same as 2
	 *
	 * 4: same as 3 plus dump extra junk
	 */
	if (unlikely(scsi_logging_level)) {
		level = SCSI_LOG_LEVEL(SCSI_LOG_MLCOMPLETE_SHIFT,
				       SCSI_LOG_MLCOMPLETE_BITS);
		if (((level > 0) && (cmd->result || disposition != SUCCESS)) ||
		    (level > 1)) {
			scsi_print_result(cmd, "Done", disposition);
			scsi_print_command(cmd);
			if (scsi_status_is_check_condition(cmd->result))
				scsi_print_sense(cmd);
			if (level > 3)
				scmd_printk(KERN_INFO, cmd,
					    "scsi host busy %d failed %d\n",
					    scsi_host_busy(cmd->device->host),
					    cmd->device->host->host_failed);
		}
	}
}
#endif

/**
 * scsi_finish_command - cleanup and pass command back to upper layer
 * @cmd: the command
 *
 * Description: Pass command off to upper layer for finishing of I/O
 *              request, waking processes that are waiting on results,
 *              etc.
 */
void scsi_finish_command(struct scsi_cmnd *cmd)
{
	struct scsi_device *sdev = cmd->device;
	struct scsi_target *starget = scsi_target(sdev);
	struct Scsi_Host *shost = sdev->host;
	struct scsi_driver *drv;
	unsigned int good_bytes;

	scsi_device_unbusy(sdev, cmd);

	/*
	 * Clear the flags that say that the device/target/host is no longer
	 * capable of accepting new commands.
	 */
	if (atomic_read(&shost->host_blocked))
		atomic_set(&shost->host_blocked, 0);
	if (atomic_read(&starget->target_blocked))
		atomic_set(&starget->target_blocked, 0);
	if (atomic_read(&sdev->device_blocked))
		atomic_set(&sdev->device_blocked, 0);

	SCSI_LOG_MLCOMPLETE(4, sdev_printk(KERN_INFO, sdev,
				"Notifying upper driver of completion "
				"(result %x)\n", cmd->result));

	good_bytes = scsi_bufflen(cmd);
	if (!blk_rq_is_passthrough(scsi_cmd_to_rq(cmd))) {
		int old_good_bytes = good_bytes;
		drv = scsi_cmd_to_driver(cmd);
		if (drv->done)
			good_bytes = drv->done(cmd);
		/*
		 * USB may not give sense identifying bad sector and
		 * simply return a residue instead, so subtract off the
		 * residue if drv->done() error processing indicates no
		 * change to the completion length.
		 */
		if (good_bytes == old_good_bytes)
			good_bytes -= scsi_get_resid(cmd);
	}
	scsi_io_completion(cmd, good_bytes);
}


/*
 * 4096 is big enough for saturating fast SCSI LUNs.
 */
int scsi_device_max_queue_depth(struct scsi_device *sdev)
{
	return min_t(int, sdev->host->can_queue, 4096);
}

/**
 * scsi_change_queue_depth - change a device's queue depth
 * @sdev: SCSI Device in question
 * @depth: number of commands allowed to be queued to the driver
 *
 * Sets the device queue depth and returns the new value.
 */
int scsi_change_queue_depth(struct scsi_device *sdev, int depth)
{
	if (!sdev->budget_map.map)
		return -EINVAL;

	depth = min_t(int, depth, scsi_device_max_queue_depth(sdev));

	if (depth > 0) {
		sdev->queue_depth = depth;
		wmb();
	}

	if (sdev->request_queue)
		blk_set_queue_depth(sdev->request_queue, depth);

	sbitmap_resize(&sdev->budget_map, sdev->queue_depth);

	return sdev->queue_depth;
}
EXPORT_SYMBOL(scsi_change_queue_depth);

/**
 * scsi_track_queue_full - track QUEUE_FULL events to adjust queue depth
 * @sdev: SCSI Device in question
 * @depth: Current number of outstanding SCSI commands on this device,
 *         not counting the one returned as QUEUE_FULL.
 *
 * Description:	This function will track successive QUEUE_FULL events on a
 * 		specific SCSI device to determine if and when there is a
 * 		need to adjust the queue depth on the device.
 *
 * Returns:
 * * 0 - No change needed
 * * >0 - Adjust queue depth to this new depth,
 * * -1 - Drop back to untagged operation using host->cmd_per_lun as the
 *   untagged command depth
 *
 * Lock Status:	None held on entry
 *
 * Notes:	Low level drivers may call this at any time and we will do
 * 		"The Right Thing."  We are interrupt context safe.
 */
int scsi_track_queue_full(struct scsi_device *sdev, int depth)
{
	if (!sdev->budget_map.map)
		return 0;

	/*
	 * Don't let QUEUE_FULLs on the same
	 * jiffies count, they could all be from
	 * same event.
	 */
	if ((jiffies >> 4) == (sdev->last_queue_full_time >> 4))
		return 0;

	sdev->last_queue_full_time = jiffies;
	if (sdev->last_queue_full_depth != depth) {
		sdev->last_queue_full_count = 1;
		sdev->last_queue_full_depth = depth;
	} else {
		sdev->last_queue_full_count++;
	}

	if (sdev->last_queue_full_count <= 10)
		return 0;

	return scsi_change_queue_depth(sdev, depth);
}
EXPORT_SYMBOL(scsi_track_queue_full);

/**
 * scsi_vpd_inquiry - Request a device provide us with a VPD page
 * @sdev: The device to ask
 * @buffer: Where to put the result
 * @page: Which Vital Product Data to return
 * @len: The length of the buffer
 *
 * This is an internal helper function.  You probably want to use
 * scsi_get_vpd_page instead.
 *
 * Returns size of the vpd page on success or a negative error number.
 */
static int scsi_vpd_inquiry(struct scsi_device *sdev, unsigned char *buffer,
							u8 page, unsigned len)
{
	int result;
	unsigned char cmd[16];

	if (len < 4)
		return -EINVAL;

	cmd[0] = INQUIRY;
	cmd[1] = 1;		/* EVPD */
	cmd[2] = page;
	cmd[3] = len >> 8;
	cmd[4] = len & 0xff;
	cmd[5] = 0;		/* Control byte */

	/*
	 * I'm not convinced we need to try quite this hard to get VPD, but
	 * all the existing users tried this hard.
	 */
	result = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_IN, buffer, len,
				  30 * HZ, 3, NULL);
	if (result)
		return -EIO;

	/*
	 * Sanity check that we got the page back that we asked for and that
	 * the page size is not 0.
	 */
	if (buffer[1] != page)
		return -EIO;

	result = get_unaligned_be16(&buffer[2]);
	if (!result)
		return -EIO;

	return result + 4;
}

enum scsi_vpd_parameters {
	SCSI_VPD_HEADER_SIZE = 4,
	SCSI_VPD_LIST_SIZE = 36,
};

static int scsi_get_vpd_size(struct scsi_device *sdev, u8 page)
{
	unsigned char vpd[SCSI_VPD_LIST_SIZE] __aligned(4);
	int result;

	if (sdev->no_vpd_size)
		return SCSI_DEFAULT_VPD_LEN;

	/*
	 * Fetch the supported pages VPD and validate that the requested page
	 * number is present.
	 */
	if (page != 0) {
		result = scsi_vpd_inquiry(sdev, vpd, 0, sizeof(vpd));
		if (result < SCSI_VPD_HEADER_SIZE)
			return 0;

		if (result > sizeof(vpd)) {
			dev_warn_once(&sdev->sdev_gendev,
				      "%s: long VPD page 0 length: %d bytes\n",
				      __func__, result);
			result = sizeof(vpd);
		}

		result -= SCSI_VPD_HEADER_SIZE;
		if (!memchr(&vpd[SCSI_VPD_HEADER_SIZE], page, result))
			return 0;
	}
	/*
	 * Fetch the VPD page header to find out how big the page
	 * is. This is done to prevent problems on legacy devices
	 * which can not handle allocation lengths as large as
	 * potentially requested by the caller.
	 */
	result = scsi_vpd_inquiry(sdev, vpd, page, SCSI_VPD_HEADER_SIZE);
	if (result < 0)
		return 0;

	if (result < SCSI_VPD_HEADER_SIZE) {
		dev_warn_once(&sdev->sdev_gendev,
			      "%s: short VPD page 0x%02x length: %d bytes\n",
			      __func__, page, result);
		return 0;
	}

	return result;
}

/**
 * scsi_get_vpd_page - Get Vital Product Data from a SCSI device
 * @sdev: The device to ask
 * @page: Which Vital Product Data to return
 * @buf: where to store the VPD
 * @buf_len: number of bytes in the VPD buffer area
 *
 * SCSI devices may optionally supply Vital Product Data.  Each 'page'
 * of VPD is defined in the appropriate SCSI document (eg SPC, SBC).
 * If the device supports this VPD page, this routine fills @buf
 * with the data from that page and return 0. If the VPD page is not
 * supported or its content cannot be retrieved, -EINVAL is returned.
 */
int scsi_get_vpd_page(struct scsi_device *sdev, u8 page, unsigned char *buf,
		      int buf_len)
{
	int result, vpd_len;

	if (!scsi_device_supports_vpd(sdev))
		return -EINVAL;

	vpd_len = scsi_get_vpd_size(sdev, page);
	if (vpd_len <= 0)
		return -EINVAL;

	vpd_len = min(vpd_len, buf_len);

	/*
	 * Fetch the actual page. Since the appropriate size was reported
	 * by the device it is now safe to ask for something bigger.
	 */
	memset(buf, 0, buf_len);
	result = scsi_vpd_inquiry(sdev, buf, page, vpd_len);
	if (result < 0)
		return -EINVAL;
	else if (result > vpd_len)
		dev_warn_once(&sdev->sdev_gendev,
			      "%s: VPD page 0x%02x result %d > %d bytes\n",
			      __func__, page, result, vpd_len);

	return 0;
}
EXPORT_SYMBOL_GPL(scsi_get_vpd_page);

/**
 * scsi_get_vpd_buf - Get Vital Product Data from a SCSI device
 * @sdev: The device to ask
 * @page: Which Vital Product Data to return
 *
 * Returns %NULL upon failure.
 */
static struct scsi_vpd *scsi_get_vpd_buf(struct scsi_device *sdev, u8 page)
{
	struct scsi_vpd *vpd_buf;
	int vpd_len, result;

	vpd_len = scsi_get_vpd_size(sdev, page);
	if (vpd_len <= 0)
		return NULL;

retry_pg:
	/*
	 * Fetch the actual page. Since the appropriate size was reported
	 * by the device it is now safe to ask for something bigger.
	 */
	vpd_buf = kmalloc(sizeof(*vpd_buf) + vpd_len, GFP_KERNEL);
	if (!vpd_buf)
		return NULL;

	result = scsi_vpd_inquiry(sdev, vpd_buf->data, page, vpd_len);
	if (result < 0) {
		kfree(vpd_buf);
		return NULL;
	}
	if (result > vpd_len) {
		dev_warn_once(&sdev->sdev_gendev,
			      "%s: VPD page 0x%02x result %d > %d bytes\n",
			      __func__, page, result, vpd_len);
		vpd_len = result;
		kfree(vpd_buf);
		goto retry_pg;
	}

	vpd_buf->len = result;

	return vpd_buf;
}

static void scsi_update_vpd_page(struct scsi_device *sdev, u8 page,
				 struct scsi_vpd __rcu **sdev_vpd_buf)
{
	struct scsi_vpd *vpd_buf;

	vpd_buf = scsi_get_vpd_buf(sdev, page);
	if (!vpd_buf)
		return;

	mutex_lock(&sdev->inquiry_mutex);
	vpd_buf = rcu_replace_pointer(*sdev_vpd_buf, vpd_buf,
				      lockdep_is_held(&sdev->inquiry_mutex));
	mutex_unlock(&sdev->inquiry_mutex);

	if (vpd_buf)
		kfree_rcu(vpd_buf, rcu);
}

/**
 * scsi_attach_vpd - Attach Vital Product Data to a SCSI device structure
 * @sdev: The device to ask
 *
 * Attach the 'Device Identification' VPD page (0x83) and the
 * 'Unit Serial Number' VPD page (0x80) to a SCSI device
 * structure. This information can be used to identify the device
 * uniquely.
 */
void scsi_attach_vpd(struct scsi_device *sdev)
{
	int i;
	struct scsi_vpd *vpd_buf;

	if (!scsi_device_supports_vpd(sdev))
		return;

	/* Ask for all the pages supported by this device */
	vpd_buf = scsi_get_vpd_buf(sdev, 0);
	if (!vpd_buf)
		return;

	for (i = 4; i < vpd_buf->len; i++) {
		switch (vpd_buf->data[i]) {
		case 0x0:
			scsi_update_vpd_page(sdev, 0x0, &sdev->vpd_pg0);
			break;
		case 0x80:
			scsi_update_vpd_page(sdev, 0x80, &sdev->vpd_pg80);
			break;
		case 0x83:
			scsi_update_vpd_page(sdev, 0x83, &sdev->vpd_pg83);
			break;
		case 0x89:
			scsi_update_vpd_page(sdev, 0x89, &sdev->vpd_pg89);
			break;
		case 0xb0:
			scsi_update_vpd_page(sdev, 0xb0, &sdev->vpd_pgb0);
			break;
		case 0xb1:
			scsi_update_vpd_page(sdev, 0xb1, &sdev->vpd_pgb1);
			break;
		case 0xb2:
			scsi_update_vpd_page(sdev, 0xb2, &sdev->vpd_pgb2);
			break;
		case 0xb7:
			scsi_update_vpd_page(sdev, 0xb7, &sdev->vpd_pgb7);
			break;
		default:
			break;
		}
	}
	kfree(vpd_buf);
}

/**
 * scsi_report_opcode - Find out if a given command is supported
 * @sdev:	scsi device to query
 * @buffer:	scratch buffer (must be at least 20 bytes long)
 * @len:	length of buffer
 * @opcode:	opcode for the command to look up
 * @sa:		service action for the command to look up
 *
 * Uses the REPORT SUPPORTED OPERATION CODES to check support for the
 * command identified with @opcode and @sa. If the command does not
 * have a service action, @sa must be 0. Returns -EINVAL if RSOC fails,
 * 0 if the command is not supported and 1 if the device claims to
 * support the command.
 */
int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer,
		       unsigned int len, unsigned char opcode,
		       unsigned short sa)
{
	unsigned char cmd[16];
	struct scsi_sense_hdr sshdr;
	int result, request_len;
	const struct scsi_exec_args exec_args = {
		.sshdr = &sshdr,
	};

	if (sdev->no_report_opcodes || sdev->scsi_level < SCSI_SPC_3)
		return -EINVAL;

	/* RSOC header + size of command we are asking about */
	request_len = 4 + COMMAND_SIZE(opcode);
	if (request_len > len) {
		dev_warn_once(&sdev->sdev_gendev,
			      "%s: len %u bytes, opcode 0x%02x needs %u\n",
			      __func__, len, opcode, request_len);
		return -EINVAL;
	}

	memset(cmd, 0, 16);
	cmd[0] = MAINTENANCE_IN;
	cmd[1] = MI_REPORT_SUPPORTED_OPERATION_CODES;
	if (!sa) {
		cmd[2] = 1;	/* One command format */
		cmd[3] = opcode;
	} else {
		cmd[2] = 3;	/* One command format with service action */
		cmd[3] = opcode;
		put_unaligned_be16(sa, &cmd[4]);
	}
	put_unaligned_be32(request_len, &cmd[6]);
	memset(buffer, 0, len);

	result = scsi_execute_cmd(sdev, cmd, REQ_OP_DRV_IN, buffer,
				  request_len, 30 * HZ, 3, &exec_args);
	if (result < 0)
		return result;
	if (result && scsi_sense_valid(&sshdr) &&
	    sshdr.sense_key == ILLEGAL_REQUEST &&
	    (sshdr.asc == 0x20 || sshdr.asc == 0x24) && sshdr.ascq == 0x00)
		return -EINVAL;

	if ((buffer[1] & 3) == 3) /* Command supported */
		return 1;

	return 0;
}
EXPORT_SYMBOL(scsi_report_opcode);

#define SCSI_CDL_CHECK_BUF_LEN	64

static bool scsi_cdl_check_cmd(struct scsi_device *sdev, u8 opcode, u16 sa,
			       unsigned char *buf)
{
	int ret;
	u8 cdlp;

	/* Check operation code */
	ret = scsi_report_opcode(sdev, buf, SCSI_CDL_CHECK_BUF_LEN, opcode, sa);
	if (ret <= 0)
		return false;

	if ((buf[1] & 0x03) != 0x03)
		return false;

	/*
	 * See SPC-6, One_command parameter data format for
	 * REPORT SUPPORTED OPERATION CODES. We have the following cases
	 * depending on rwcdlp (buf[0] & 0x01) value:
	 *  - rwcdlp == 0: then cdlp indicates support for the A mode page when
	 *		   it is equal to 1 and for the B mode page when it is
	 *		   equal to 2.
	 *  - rwcdlp == 1: then cdlp indicates support for the T2A mode page
	 *		   when it is equal to 1 and for the T2B mode page when
	 *		   it is equal to 2.
	 * Overall, to detect support for command duration limits, we only need
	 * to check that cdlp is 1 or 2.
	 */
	cdlp = (buf[1] & 0x18) >> 3;

	return cdlp == 0x01 || cdlp == 0x02;
}

/**
 * scsi_cdl_check - Check if a SCSI device supports Command Duration Limits
 * @sdev: The device to check
 */
void scsi_cdl_check(struct scsi_device *sdev)
{
	bool cdl_supported;
	unsigned char *buf;

	/*
	 * Support for CDL was defined in SPC-5. Ignore devices reporting an
	 * lower SPC version. This also avoids problems with old drives choking
	 * on MAINTENANCE_IN / MI_REPORT_SUPPORTED_OPERATION_CODES with a
	 * service action specified, as done in scsi_cdl_check_cmd().
	 */
	if (sdev->scsi_level < SCSI_SPC_5) {
		sdev->cdl_supported = 0;
		return;
	}

	buf = kmalloc(SCSI_CDL_CHECK_BUF_LEN, GFP_KERNEL);
	if (!buf) {
		sdev->cdl_supported = 0;
		return;
	}

	/* Check support for READ_16, WRITE_16, READ_32 and WRITE_32 commands */
	cdl_supported =
		scsi_cdl_check_cmd(sdev, READ_16, 0, buf) ||
		scsi_cdl_check_cmd(sdev, WRITE_16, 0, buf) ||
		scsi_cdl_check_cmd(sdev, VARIABLE_LENGTH_CMD, READ_32, buf) ||
		scsi_cdl_check_cmd(sdev, VARIABLE_LENGTH_CMD, WRITE_32, buf);
	if (cdl_supported) {
		/*
		 * We have CDL support: force the use of READ16/WRITE16.
		 * READ32 and WRITE32 will be used for devices that support
		 * the T10_PI_TYPE2_PROTECTION protection type.
		 */
		sdev->use_16_for_rw = 1;
		sdev->use_10_for_rw = 0;

		sdev->cdl_supported = 1;

		/*
		 * If the device supports CDL, make sure that the current drive
		 * feature status is consistent with the user controlled
		 * cdl_enable state.
		 */
		scsi_cdl_enable(sdev, sdev->cdl_enable);
	} else {
		sdev->cdl_supported = 0;
	}

	kfree(buf);
}

/**
 * scsi_cdl_enable - Enable or disable a SCSI device supports for Command
 *                   Duration Limits
 * @sdev: The target device
 * @enable: the target state
 */
int scsi_cdl_enable(struct scsi_device *sdev, bool enable)
{
	char buf[64];
	int ret;

	if (!sdev->cdl_supported)
		return -EOPNOTSUPP;

	/*
	 * For ATA devices, CDL needs to be enabled with a SET FEATURES command.
	 */
	if (sdev->is_ata) {
		struct scsi_mode_data data;
		struct scsi_sense_hdr sshdr;
		char *buf_data;
		size_t avail, offset;
		int len;

		ret = scsi_mode_sense(sdev, 0x08, 0x0a, 0xf2, buf, sizeof(buf),
				      5 * HZ, 3, &data, NULL);
		if (ret)
			return -EINVAL;

		/* Enable or disable CDL using the ATA feature page */
		avail = min_t(size_t, data.length, sizeof(buf));
		if (data.header_length > avail)
			return -EINVAL;

		offset = data.header_length;
		avail -= data.header_length;

		if (data.block_descriptor_length > avail)
			return -EINVAL;

		offset += data.block_descriptor_length;
		avail -= data.block_descriptor_length;

		if (avail < 5)
			return -EINVAL;

		buf_data = buf + offset;
		len = avail;

		/*
		 * If we want to enable CDL and CDL is already enabled on the
		 * device, do nothing. This avoids needlessly resetting the CDL
		 * statistics on the device as that is implied by the CDL enable
		 * action. Similar to this, there is no need to do anything if
		 * we want to disable CDL and CDL is already disabled.
		 */
		if (enable) {
			if ((buf_data[4] & 0x03) == 0x02)
				goto out;
			buf_data[4] &= ~0x03;
			buf_data[4] |= 0x02;
		} else {
			if ((buf_data[4] & 0x03) == 0x00)
				goto out;
			buf_data[4] &= ~0x03;
		}

		ret = scsi_mode_select(sdev, 1, 0, buf_data, len, 5 * HZ, 3,
				       &data, &sshdr);
		if (ret) {
			if (ret > 0 && scsi_sense_valid(&sshdr))
				scsi_print_sense_hdr(sdev,
					dev_name(&sdev->sdev_gendev), &sshdr);
			return ret;
		}
	}

out:
	sdev->cdl_enable = enable;

	return 0;
}

/**
 * scsi_device_get  -  get an additional reference to a scsi_device
 * @sdev:	device to get a reference to
 *
 * Description: Gets a reference to the scsi_device and increments the use count
 * of the underlying LLDD module.  You must hold host_lock of the
 * parent Scsi_Host or already have a reference when calling this.
 *
 * This will fail if a device is deleted or cancelled, or when the LLD module
 * is in the process of being unloaded.
 */
int scsi_device_get(struct scsi_device *sdev)
{
	if (sdev->sdev_state == SDEV_DEL || sdev->sdev_state == SDEV_CANCEL)
		goto fail;
	if (!try_module_get(sdev->host->hostt->module))
		goto fail;
	if (!get_device(&sdev->sdev_gendev))
		goto fail_put_module;
	return 0;

fail_put_module:
	module_put(sdev->host->hostt->module);
fail:
	return -ENXIO;
}
EXPORT_SYMBOL(scsi_device_get);

/**
 * scsi_device_put  -  release a reference to a scsi_device
 * @sdev:	device to release a reference on.
 *
 * Description: Release a reference to the scsi_device and decrements the use
 * count of the underlying LLDD module.  The device is freed once the last
 * user vanishes.
 */
void scsi_device_put(struct scsi_device *sdev)
{
	struct module *mod = sdev->host->hostt->module;

	put_device(&sdev->sdev_gendev);
	module_put(mod);
}
EXPORT_SYMBOL(scsi_device_put);

/* helper for shost_for_each_device, see that for documentation */
struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *shost,
					   struct scsi_device *prev)
{
	struct list_head *list = (prev ? &prev->siblings : &shost->__devices);
	struct scsi_device *next = NULL;
	unsigned long flags;

	spin_lock_irqsave(shost->host_lock, flags);
	while (list->next != &shost->__devices) {
		next = list_entry(list->next, struct scsi_device, siblings);
		/*
		 * Skip pseudo devices and also devices we can't get a
		 * reference to.
		 */
		if (!scsi_device_is_pseudo_dev(next) && !scsi_device_get(next))
			break;
		next = NULL;
		list = list->next;
	}
	spin_unlock_irqrestore(shost->host_lock, flags);

	if (prev)
		scsi_device_put(prev);
	return next;
}
EXPORT_SYMBOL(__scsi_iterate_devices);

/**
 * starget_for_each_device  -  helper to walk all devices of a target
 * @starget:	target whose devices we want to iterate over.
 * @data:	Opaque passed to each function call.
 * @fn:		Function to call on each device
 *
 * This traverses over each device of @starget.  The devices have
 * a reference that must be released by scsi_host_put when breaking
 * out of the loop.
 */
void starget_for_each_device(struct scsi_target *starget, void *data,
		     void (*fn)(struct scsi_device *, void *))
{
	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
	struct scsi_device *sdev;

	shost_for_each_device(sdev, shost) {
		if ((sdev->channel == starget->channel) &&
		    (sdev->id == starget->id))
			fn(sdev, data);
	}
}
EXPORT_SYMBOL(starget_for_each_device);

/**
 * __starget_for_each_device - helper to walk all devices of a target (UNLOCKED)
 * @starget:	target whose devices we want to iterate over.
 * @data:	parameter for callback @fn()
 * @fn:		callback function that is invoked for each device
 *
 * This traverses over each device of @starget.  It does _not_
 * take a reference on the scsi_device, so the whole loop must be
 * protected by shost->host_lock.
 *
 * Note:  The only reason why drivers would want to use this is because
 * they need to access the device list in irq context.  Otherwise you
 * really want to use starget_for_each_device instead.
 **/
void __starget_for_each_device(struct scsi_target *starget, void *data,
			       void (*fn)(struct scsi_device *, void *))
{
	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
	struct scsi_device *sdev;

	__shost_for_each_device(sdev, shost) {
		if ((sdev->channel == starget->channel) &&
		    (sdev->id == starget->id))
			fn(sdev, data);
	}
}
EXPORT_SYMBOL(__starget_for_each_device);

/**
 * __scsi_device_lookup_by_target - find a device given the target (UNLOCKED)
 * @starget:	SCSI target pointer
 * @lun:	SCSI Logical Unit Number
 *
 * Description: Looks up the scsi_device with the specified @lun for a given
 * @starget.  The returned scsi_device does not have an additional
 * reference.  You must hold the host's host_lock over this call and
 * any access to the returned scsi_device. A scsi_device in state
 * SDEV_DEL is skipped.
 *
 * Note:  The only reason why drivers should use this is because
 * they need to access the device list in irq context.  Otherwise you
 * really want to use scsi_device_lookup_by_target instead.
 **/
struct scsi_device *__scsi_device_lookup_by_target(struct scsi_target *starget,
						   u64 lun)
{
	struct scsi_device *sdev;

	list_for_each_entry(sdev, &starget->devices, same_target_siblings) {
		if (sdev->sdev_state == SDEV_DEL)
			continue;
		if (sdev->lun ==lun)
			return sdev;
	}

	return NULL;
}
EXPORT_SYMBOL(__scsi_device_lookup_by_target);

/**
 * scsi_device_lookup_by_target - find a device given the target
 * @starget:	SCSI target pointer
 * @lun:	SCSI Logical Unit Number
 *
 * Description: Looks up the scsi_device with the specified @lun for a given
 * @starget.  The returned scsi_device has an additional reference that
 * needs to be released with scsi_device_put once you're done with it.
 **/
struct scsi_device *scsi_device_lookup_by_target(struct scsi_target *starget,
						 u64 lun)
{
	struct scsi_device *sdev;
	struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
	unsigned long flags;

	spin_lock_irqsave(shost->host_lock, flags);
	sdev = __scsi_device_lookup_by_target(starget, lun);
	if (sdev && scsi_device_get(sdev))
		sdev = NULL;
	spin_unlock_irqrestore(shost->host_lock, flags);

	return sdev;
}
EXPORT_SYMBOL(scsi_device_lookup_by_target);

/**
 * __scsi_device_lookup - find a device given the host (UNLOCKED)
 * @shost:	SCSI host pointer
 * @channel:	SCSI channel (zero if only one channel)
 * @id:		SCSI target number (physical unit number)
 * @lun:	SCSI Logical Unit Number
 *
 * Description: Looks up the scsi_device with the specified @channel, @id, @lun
 * for a given host. The returned scsi_device does not have an additional
 * reference.  You must hold the host's host_lock over this call and any access
 * to the returned scsi_device.
 *
 * Note:  The only reason why drivers would want to use this is because
 * they need to access the device list in irq context.  Otherwise you
 * really want to use scsi_device_lookup instead.
 **/
struct scsi_device *__scsi_device_lookup(struct Scsi_Host *shost,
		uint channel, uint id, u64 lun)
{
	struct scsi_device *sdev;

	list_for_each_entry(sdev, &shost->__devices, siblings) {
		if (sdev->sdev_state == SDEV_DEL)
			continue;
		if (sdev->channel == channel && sdev->id == id &&
				sdev->lun ==lun)
			return sdev;
	}

	return NULL;
}
EXPORT_SYMBOL(__scsi_device_lookup);

/**
 * scsi_device_lookup - find a device given the host
 * @shost:	SCSI host pointer
 * @channel:	SCSI channel (zero if only one channel)
 * @id:		SCSI target number (physical unit number)
 * @lun:	SCSI Logical Unit Number
 *
 * Description: Looks up the scsi_device with the specified @channel, @id, @lun
 * for a given host.  The returned scsi_device has an additional reference that
 * needs to be released with scsi_device_put once you're done with it.
 **/
struct scsi_device *scsi_device_lookup(struct Scsi_Host *shost,
		uint channel, uint id, u64 lun)
{
	struct scsi_device *sdev;
	unsigned long flags;

	spin_lock_irqsave(shost->host_lock, flags);
	sdev = __scsi_device_lookup(shost, channel, id, lun);
	if (sdev && scsi_device_get(sdev))
		sdev = NULL;
	spin_unlock_irqrestore(shost->host_lock, flags);

	return sdev;
}
EXPORT_SYMBOL(scsi_device_lookup);

MODULE_DESCRIPTION("SCSI core");
MODULE_LICENSE("GPL");

module_param(scsi_logging_level, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(scsi_logging_level, "a bit mask of logging levels");

static int __init init_scsi(void)
{
	int error;

	error = scsi_init_procfs();
	if (error)
		goto cleanup_queue;
	error = scsi_init_devinfo();
	if (error)
		goto cleanup_procfs;
	error = scsi_init_hosts();
	if (error)
		goto cleanup_devlist;
	error = scsi_init_sysctl();
	if (error)
		goto cleanup_hosts;
	error = scsi_sysfs_register();
	if (error)
		goto cleanup_sysctl;

	scsi_netlink_init();

	printk(KERN_NOTICE "SCSI subsystem initialized\n");
	return 0;

cleanup_sysctl:
	scsi_exit_sysctl();
cleanup_hosts:
	scsi_exit_hosts();
cleanup_devlist:
	scsi_exit_devinfo();
cleanup_procfs:
	scsi_exit_procfs();
cleanup_queue:
	scsi_exit_queue();
	printk(KERN_ERR "SCSI subsystem failed to initialize, error = %d\n",
	       -error);
	return error;
}

static void __exit exit_scsi(void)
{
	scsi_netlink_exit();
	scsi_sysfs_unregister();
	scsi_exit_sysctl();
	scsi_exit_hosts();
	scsi_exit_devinfo();
	scsi_exit_procfs();
	scsi_exit_queue();
}

subsys_initcall(init_scsi);
module_exit(exit_scsi);