Google Git Google Git
Sign in
zircon-guest/third_party/linux/refs/heads/linux-7.3.y/./drivers/scsi/lpfc/lpfc_attr.c
blob: bb5c84f0b7877f78dcb01b6e8e6b06533a841ca1 [file] [edit]
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
* Copyright (C) 2017-2026 Broadcom. All Rights Reserved. The term *
* “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. *
* Copyright (C) 2004-2016 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.broadcom.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
* modify it under the terms of version 2 of the GNU General *
* Public License as published by the Free Software Foundation. *
* This program is distributed in the hope that it will be useful. *
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
* TO BE LEGALLY INVALID. See the GNU General Public License for *
* more details, a copy of which can be found in the file COPYING *
* included with this package. *
*******************************************************************/
#include <linux/ctype.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/aer.h>
#include <linux/gfp.h>
#include <linux/kernel.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport_fc.h>
#include <scsi/fc/fc_fs.h>
#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc.h"
#include "lpfc_scsi.h"
#include "lpfc_nvme.h"
#include "lpfc_logmsg.h"
#include "lpfc_version.h"
#include "lpfc_compat.h"
#include "lpfc_crtn.h"
#include "lpfc_vport.h"
#include "lpfc_attr.h"
#define LPFC_DEF_DEVLOSS_TMO 30
#define LPFC_MIN_DEVLOSS_TMO 1
#define LPFC_MAX_DEVLOSS_TMO 255
#define LPFC_INFO_MORE_STR "\nCould be more info...\n"
/*
* Write key size should be multiple of 4. If write key is changed
* make sure that library write key is also changed.
*/
#define LPFC_REG_WRITE_KEY_SIZE 4
#define LPFC_REG_WRITE_KEY "EMLX"
const char *const trunk_errmsg[] = { /* map errcode */
"", /* There is no such error code at index 0*/
"link negotiated speed does not match existing"
" trunk - link was \"low\" speed",
"link negotiated speed does not match"
" existing trunk - link was \"middle\" speed",
"link negotiated speed does not match existing"
" trunk - link was \"high\" speed",
"Attached to non-trunking port - F_Port",
"Attached to non-trunking port - N_Port",
"FLOGI response timeout",
"non-FLOGI frame received",
"Invalid FLOGI response",
"Trunking initialization protocol",
"Trunk peer device mismatch",
};
/**
* lpfc_jedec_to_ascii - Hex to ascii converter according to JEDEC rules
* @incr: integer to convert.
* @hdw: ascii string holding converted integer plus a string terminator.
*
* Description:
* JEDEC Joint Electron Device Engineering Council.
* Convert a 32 bit integer composed of 8 nibbles into an 8 byte ascii
* character string. The string is then terminated with a NULL in byte 9.
* Hex 0-9 becomes ascii '0' to '9'.
* Hex a-f becomes ascii '=' to 'B' capital B.
*
* Notes:
* Coded for 32 bit integers only.
**/
static void
lpfc_jedec_to_ascii(int incr, char hdw[])
{
int i, j;
for (i = 0; i < 8; i++) {
j = (incr & 0xf);
if (j <= 9)
hdw[7 - i] = 0x30 + j;
else
hdw[7 - i] = 0x61 + j - 10;
incr = (incr >> 4);
}
hdw[8] = 0;
return;
}
static ssize_t
lpfc_cmf_info_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_cgn_info *cp = NULL;
struct lpfc_cgn_stat *cgs;
int len = 0;
int cpu;
u64 rcv, total;
if (phba->cgn_i)
cp = (struct lpfc_cgn_info *)phba->cgn_i->virt;
len = strnlen(buf, PAGE_SIZE);
len += sysfs_emit_at(buf, len,
"Congestion Mgmt Info: E2Eattr %d Ver %d CMF %d cnt %d\n",
phba->sli4_hba.pc_sli4_params.mi_cap,
cp ? cp->cgn_info_version : 0,
phba->sli4_hba.pc_sli4_params.cmf,
phba->cmf_timer_cnt);
if (!phba->sli4_hba.pc_sli4_params.cmf)
goto buffer_done;
switch (phba->cgn_init_reg_signal) {
case EDC_CG_SIG_WARN_ONLY:
len += sysfs_emit_at(buf, len,
"Register: Init: Signal:WARN ");
break;
case EDC_CG_SIG_WARN_ALARM:
len += sysfs_emit_at(buf, len,
"Register: Init: Signal:WARN|ALARM ");
break;
default:
len += sysfs_emit_at(buf, len,
"Register: Init: Signal:NONE ");
break;
}
switch (phba->cgn_init_reg_fpin) {
case LPFC_CGN_FPIN_WARN:
len += sysfs_emit_at(buf, len, "FPIN:WARN\n");
break;
case LPFC_CGN_FPIN_ALARM:
len += sysfs_emit_at(buf, len, "FPIN:ALARM\n");
break;
case LPFC_CGN_FPIN_BOTH:
len += sysfs_emit_at(buf, len, "FPIN:WARN|ALARM\n");
break;
default:
len += sysfs_emit_at(buf, len, "FPIN:NONE\n");
break;
}
switch (phba->cgn_reg_signal) {
case EDC_CG_SIG_WARN_ONLY:
len += sysfs_emit_at(buf, len,
" Current: Signal:WARN ");
break;
case EDC_CG_SIG_WARN_ALARM:
len += sysfs_emit_at(buf, len,
" Current: Signal:WARN|ALARM ");
break;
default:
len += sysfs_emit_at(buf, len,
" Current: Signal:NONE ");
break;
}
switch (phba->cgn_reg_fpin) {
case LPFC_CGN_FPIN_WARN:
len += sysfs_emit_at(buf, len,
"FPIN:WARN ACQEcnt:%d\n",
phba->cgn_acqe_cnt);
break;
case LPFC_CGN_FPIN_ALARM:
len += sysfs_emit_at(buf, len,
"FPIN:ALARM ACQEcnt:%d\n",
phba->cgn_acqe_cnt);
break;
case LPFC_CGN_FPIN_BOTH:
len += sysfs_emit_at(buf, len,
"FPIN:WARN|ALARM ACQEcnt:%d\n",
phba->cgn_acqe_cnt);
break;
default:
len += sysfs_emit_at(buf, len,
"FPIN:NONE ACQEcnt:%d\n",
phba->cgn_acqe_cnt);
break;
}
if (phba->cmf_active_mode != phba->cgn_p.cgn_param_mode) {
switch (phba->cmf_active_mode) {
case LPFC_CFG_OFF:
len += sysfs_emit_at(buf, len, "Active: Mode:Off\n");
break;
case LPFC_CFG_MANAGED:
len += sysfs_emit_at(buf, len,
"Active: Mode:Managed\n");
break;
case LPFC_CFG_MONITOR:
len += sysfs_emit_at(buf, len,
"Active: Mode:Monitor\n");
break;
default:
len += sysfs_emit_at(buf, len,
"Active: Mode:Unknown\n");
}
}
switch (phba->cgn_p.cgn_param_mode) {
case LPFC_CFG_OFF:
len += sysfs_emit_at(buf, len, "Config: Mode:Off ");
break;
case LPFC_CFG_MANAGED:
len += sysfs_emit_at(buf, len, "Config: Mode:Managed ");
break;
case LPFC_CFG_MONITOR:
len += sysfs_emit_at(buf, len, "Config: Mode:Monitor ");
break;
default:
len += sysfs_emit_at(buf, len, "Config: Mode:Unknown ");
}
total = 0;
rcv = 0;
for_each_present_cpu(cpu) {
cgs = per_cpu_ptr(phba->cmf_stat, cpu);
total += atomic64_read(&cgs->total_bytes);
rcv += atomic64_read(&cgs->rcv_bytes);
}
len += sysfs_emit_at(buf, len,
"IObusy:%d Info:%d Bytes: Rcv:x%llx Total:x%llx\n",
atomic_read(&phba->cmf_busy),
phba->cmf_active_info, rcv, total);
len += sysfs_emit_at(buf, len,
"Port_speed:%d Link_byte_cnt:%ld Max_byte_per_interval:%ld\n",
lpfc_sli_port_speed_get(phba),
(unsigned long)phba->cmf_link_byte_count,
(unsigned long)phba->cmf_max_bytes_per_interval);
buffer_done:
if (unlikely(len >= (PAGE_SIZE - 1))) {
lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT,
"6312 Catching potential buffer "
"overflow > PAGE_SIZE = %lu bytes\n",
PAGE_SIZE);
strscpy(buf + PAGE_SIZE - 1 - sizeof(LPFC_INFO_MORE_STR),
LPFC_INFO_MORE_STR, sizeof(LPFC_INFO_MORE_STR) + 1);
}
return len;
}
static ssize_t
lpfc_vmid_info_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_vmid *vmp;
int len = 0, i, j, k, cpu;
char hxstr[LPFC_MAX_VMID_SIZE * 3] = {0};
struct timespec64 curr_tm;
struct lpfc_vmid_priority_range *vr;
u64 *lta, rct_acc = 0, max_lta = 0;
struct tm tm_val;
ktime_get_ts64(&curr_tm);
len += scnprintf(buf + len, PAGE_SIZE - len, "Key 'vmid':\n");
/* if enabled continue, else return */
if (lpfc_is_vmid_enabled(phba)) {
len += scnprintf(buf + len, PAGE_SIZE - len,
"lpfc VMID Page: ON\n\n");
} else {
len += scnprintf(buf + len, PAGE_SIZE - len,
"lpfc VMID Page: OFF\n\n");
return len;
}
/* if using priority tagging */
if (vport->phba->pport->vmid_flag & LPFC_VMID_TYPE_PRIO) {
len += scnprintf(buf + len, PAGE_SIZE - len,
"VMID priority ranges:\n");
vr = vport->vmid_priority.vmid_range;
for (i = 0; i < vport->vmid_priority.num_descriptors; ++i) {
len += scnprintf(buf + len, PAGE_SIZE - len,
"\t[x%x - x%x], qos: x%x\n",
vr->low, vr->high, vr->qos);
vr++;
}
}
for (i = 0; i < phba->cfg_max_vmid; i++) {
vmp = &vport->vmid[i];
max_lta = 0;
/* only if the slot is used */
if (!(vmp->flag & LPFC_VMID_SLOT_USED) ||
!(vmp->flag & LPFC_VMID_REGISTERED))
continue;
/* if using priority tagging */
if (vport->phba->pport->vmid_flag & LPFC_VMID_TYPE_PRIO) {
len += scnprintf(buf + len, PAGE_SIZE - len,
"VEM ID: %02x:%02x:%02x:%02x:"
"%02x:%02x:%02x:%02x:%02x:%02x:"
"%02x:%02x:%02x:%02x:%02x:%02x\n",
vport->lpfc_vmid_host_uuid[0],
vport->lpfc_vmid_host_uuid[1],
vport->lpfc_vmid_host_uuid[2],
vport->lpfc_vmid_host_uuid[3],
vport->lpfc_vmid_host_uuid[4],
vport->lpfc_vmid_host_uuid[5],
vport->lpfc_vmid_host_uuid[6],
vport->lpfc_vmid_host_uuid[7],
vport->lpfc_vmid_host_uuid[8],
vport->lpfc_vmid_host_uuid[9],
vport->lpfc_vmid_host_uuid[10],
vport->lpfc_vmid_host_uuid[11],
vport->lpfc_vmid_host_uuid[12],
vport->lpfc_vmid_host_uuid[13],
vport->lpfc_vmid_host_uuid[14],
vport->lpfc_vmid_host_uuid[15]);
}
/* IO stats */
len += scnprintf(buf + len, PAGE_SIZE - len,
"ID00 READs:%llx WRITEs:%llx\n",
vmp->io_rd_cnt,
vmp->io_wr_cnt);
for (j = 0, k = 0; j < strlen(vmp->host_vmid); j++, k += 3)
sprintf((char *)(hxstr + k), "%2x ", vmp->host_vmid[j]);
/* UUIDs */
len += scnprintf(buf + len, PAGE_SIZE - len, "UUID:\n");
len += scnprintf(buf + len, PAGE_SIZE - len, "%s\n", hxstr);
len += scnprintf(buf + len, PAGE_SIZE - len, "String (%s)\n",
vmp->host_vmid);
if (vport->phba->pport->vmid_flag & LPFC_VMID_TYPE_PRIO)
len += scnprintf(buf + len, PAGE_SIZE - len,
"CS_CTL VMID: 0x%x\n",
vmp->un.cs_ctl_vmid);
else
len += scnprintf(buf + len, PAGE_SIZE - len,
"Application id: 0x%x\n",
vmp->un.app_id);
/* calculate the last access time */
for_each_possible_cpu(cpu) {
lta = per_cpu_ptr(vmp->last_io_time, cpu);
if (!lta)
continue;
/* if last access time is less than timeout */
if (time_after((unsigned long)*lta, jiffies))
continue;
if (*lta > max_lta)
max_lta = *lta;
}
rct_acc = jiffies_to_msecs(jiffies - max_lta) / 1000;
/* current time */
time64_to_tm(ktime_get_real_seconds(),
-(sys_tz.tz_minuteswest * 60) - rct_acc, &tm_val);
len += scnprintf(buf + len, PAGE_SIZE - len,
"Last Access Time :"
"%ld-%d-%dT%02d:%02d:%02d\n\n",
1900 + tm_val.tm_year, tm_val.tm_mon + 1,
tm_val.tm_mday, tm_val.tm_hour,
tm_val.tm_min, tm_val.tm_sec);
if (len >= PAGE_SIZE)
return len;
memset(hxstr, 0, LPFC_MAX_VMID_SIZE * 3);
}
return len;
}
/**
* lpfc_drvr_version_show - Return the Emulex driver string with version number
* @dev: class unused variable.
* @attr: device attribute, not used.
* @buf: on return contains the module description text.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_drvr_version_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
return scnprintf(buf, PAGE_SIZE, LPFC_MODULE_DESC "\n");
}
/**
* lpfc_enable_fip_show - Return the fip mode of the HBA
* @dev: class unused variable.
* @attr: device attribute, not used.
* @buf: on return contains the module description text.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_enable_fip_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
if (test_bit(HBA_FIP_SUPPORT, &phba->hba_flag))
return scnprintf(buf, PAGE_SIZE, "1\n");
else
return scnprintf(buf, PAGE_SIZE, "0\n");
}
static ssize_t
lpfc_nvme_info_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = shost_priv(shost);
struct lpfc_hba *phba = vport->phba;
struct lpfc_nvmet_tgtport *tgtp;
struct nvme_fc_local_port *localport;
struct lpfc_nvme_lport *lport;
struct lpfc_nvme_rport *rport;
struct lpfc_nodelist *ndlp;
struct nvme_fc_remote_port *nrport;
struct lpfc_fc4_ctrl_stat *cstat;
uint64_t data1, data2, data3;
uint64_t totin, totout, tot;
unsigned long iflags;
char *statep;
int i;
int len = 0;
if (!(vport->cfg_enable_fc4_type & LPFC_ENABLE_NVME)) {
len = sysfs_emit(buf, "NVME Disabled\n");
return len;
}
len = strnlen(buf, PAGE_SIZE);
if (phba->nvmet_support) {
if (!phba->targetport) {
len = sysfs_emit(buf,
"NVME Target: x%llx is not allocated\n",
wwn_to_u64(vport->fc_portname.u.wwn));
return len;
}
/* Port state is only one of two values for now. */
if (phba->targetport->port_id)
statep = "REGISTERED";
else
statep = "INIT";
len += sysfs_emit_at(buf, len,
"NVME Target Enabled State %s\n",
statep);
len += sysfs_emit_at(buf, len,
"%s%d WWPN x%llx WWNN x%llx DID x%06x\n",
"NVME Target: lpfc",
phba->brd_no,
wwn_to_u64(vport->fc_portname.u.wwn),
wwn_to_u64(vport->fc_nodename.u.wwn),
phba->targetport->port_id);
len += sysfs_emit_at(buf, len, "\nNVME Target: Statistics\n");
tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
len += sysfs_emit_at(buf, len,
"LS: Rcv %08x Drop %08x Abort %08x\n",
atomic_read(&tgtp->rcv_ls_req_in),
atomic_read(&tgtp->rcv_ls_req_drop),
atomic_read(&tgtp->xmt_ls_abort));
if (atomic_read(&tgtp->rcv_ls_req_in) !=
atomic_read(&tgtp->rcv_ls_req_out)) {
len += sysfs_emit_at(buf, len,
"Rcv LS: in %08x != out %08x\n",
atomic_read(&tgtp->rcv_ls_req_in),
atomic_read(&tgtp->rcv_ls_req_out));
}
len += sysfs_emit_at(buf, len,
"LS: Xmt %08x Drop %08x Cmpl %08x\n",
atomic_read(&tgtp->xmt_ls_rsp),
atomic_read(&tgtp->xmt_ls_drop),
atomic_read(&tgtp->xmt_ls_rsp_cmpl));
len += sysfs_emit_at(buf, len,
"LS: RSP Abort %08x xb %08x Err %08x\n",
atomic_read(&tgtp->xmt_ls_rsp_aborted),
atomic_read(&tgtp->xmt_ls_rsp_xb_set),
atomic_read(&tgtp->xmt_ls_rsp_error));
len += sysfs_emit_at(buf, len,
"FCP: Rcv %08x Defer %08x Release %08x Drop %08x\n",
atomic_read(&tgtp->rcv_fcp_cmd_in),
atomic_read(&tgtp->rcv_fcp_cmd_defer),
atomic_read(&tgtp->xmt_fcp_release),
atomic_read(&tgtp->rcv_fcp_cmd_drop));
if (atomic_read(&tgtp->rcv_fcp_cmd_in) !=
atomic_read(&tgtp->rcv_fcp_cmd_out)) {
len += sysfs_emit_at(buf, len,
"Rcv FCP: in %08x != out %08x\n",
atomic_read(&tgtp->rcv_fcp_cmd_in),
atomic_read(&tgtp->rcv_fcp_cmd_out));
}
len += sysfs_emit_at(buf, len,
"FCP Rsp: RD %08x rsp %08x WR %08x rsp %08x drop %08x\n",
atomic_read(&tgtp->xmt_fcp_read),
atomic_read(&tgtp->xmt_fcp_read_rsp),
atomic_read(&tgtp->xmt_fcp_write),
atomic_read(&tgtp->xmt_fcp_rsp),
atomic_read(&tgtp->xmt_fcp_drop));
len += sysfs_emit_at(buf, len,
"FCP Rsp Cmpl: %08x err %08x drop %08x\n",
atomic_read(&tgtp->xmt_fcp_rsp_cmpl),
atomic_read(&tgtp->xmt_fcp_rsp_error),
atomic_read(&tgtp->xmt_fcp_rsp_drop));
len += sysfs_emit_at(buf, len,
"FCP Rsp Abort: %08x xb %08x xricqe %08x\n",
atomic_read(&tgtp->xmt_fcp_rsp_aborted),
atomic_read(&tgtp->xmt_fcp_rsp_xb_set),
atomic_read(&tgtp->xmt_fcp_xri_abort_cqe));
len += sysfs_emit_at(buf, len,
"ABORT: Xmt %08x Cmpl %08x\n",
atomic_read(&tgtp->xmt_fcp_abort),
atomic_read(&tgtp->xmt_fcp_abort_cmpl));
len += sysfs_emit_at(buf, len,
"ABORT: Sol %08x Usol %08x Err %08x Cmpl %08x\n",
atomic_read(&tgtp->xmt_abort_sol),
atomic_read(&tgtp->xmt_abort_unsol),
atomic_read(&tgtp->xmt_abort_rsp),
atomic_read(&tgtp->xmt_abort_rsp_error));
len += sysfs_emit_at(buf, len,
"DELAY: ctx %08x fod %08x wqfull %08x\n",
atomic_read(&tgtp->defer_ctx),
atomic_read(&tgtp->defer_fod),
atomic_read(&tgtp->defer_wqfull));
/* Calculate outstanding IOs */
tot = atomic_read(&tgtp->rcv_fcp_cmd_drop);
tot += atomic_read(&tgtp->xmt_fcp_release);
tot = atomic_read(&tgtp->rcv_fcp_cmd_in) - tot;
len += sysfs_emit_at(buf, len,
"IO_CTX: %08x WAIT: cur %08x tot %08x\n"
"CTX Outstanding %08llx\n\n",
phba->sli4_hba.nvmet_xri_cnt,
phba->sli4_hba.nvmet_io_wait_cnt,
phba->sli4_hba.nvmet_io_wait_total,
tot);
goto buffer_done;
}
localport = vport->localport;
if (!localport) {
len = sysfs_emit(buf,
"NVME Initiator x%llx is not allocated\n",
wwn_to_u64(vport->fc_portname.u.wwn));
return len;
}
lport = (struct lpfc_nvme_lport *)localport->private;
len += sysfs_emit_at(buf, len, "\nNVME Initiator Enabled\n");
len += sysfs_emit_at(buf, len,
"XRI Dist lpfc%d Total %d IO %d ELS %d\n",
phba->brd_no,
phba->sli4_hba.max_cfg_param.max_xri,
phba->sli4_hba.io_xri_max,
lpfc_sli4_get_els_iocb_cnt(phba));
/* Port state is only one of two values for now. */
if (localport->port_id)
statep = "ONLINE";
else
statep = "UNKNOWN ";
len += sysfs_emit_at(buf, len,
"%s%d WWPN x%llx WWNN x%llx DID x%06x %s\n",
"NVME LPORT lpfc",
phba->brd_no,
wwn_to_u64(vport->fc_portname.u.wwn),
wwn_to_u64(vport->fc_nodename.u.wwn),
localport->port_id, statep);
spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags);
list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
nrport = NULL;
spin_lock(&ndlp->lock);
rport = lpfc_ndlp_get_nrport(ndlp);
if (rport)
nrport = rport->remoteport;
spin_unlock(&ndlp->lock);
if (!nrport)
continue;
/* Port state is only one of two values for now. */
switch (nrport->port_state) {
case FC_OBJSTATE_ONLINE:
statep = "ONLINE";
break;
case FC_OBJSTATE_UNKNOWN:
statep = "UNKNOWN ";
break;
default:
statep = "UNSUPPORTED";
break;
}
/* Tab in to show lport ownership. */
len += sysfs_emit_at(buf, len, "NVME RPORT ");
if (phba->brd_no >= 10)
len += sysfs_emit_at(buf, len, " ");
len += sysfs_emit_at(buf, len, "WWPN x%llx ",
nrport->port_name);
len += sysfs_emit_at(buf, len, "WWNN x%llx ",
nrport->node_name);
len += sysfs_emit_at(buf, len, "DID x%06x ",
nrport->port_id);
/* An NVME rport can have multiple roles. */
if (nrport->port_role & FC_PORT_ROLE_NVME_INITIATOR)
len += sysfs_emit_at(buf, len, "INITIATOR ");
if (nrport->port_role & FC_PORT_ROLE_NVME_TARGET)
len += sysfs_emit_at(buf, len, "TARGET ");
if (nrport->port_role & FC_PORT_ROLE_NVME_DISCOVERY)
len += sysfs_emit_at(buf, len, "DISCSRVC ");
if (nrport->port_role & ~(FC_PORT_ROLE_NVME_INITIATOR |
FC_PORT_ROLE_NVME_TARGET |
FC_PORT_ROLE_NVME_DISCOVERY))
len += sysfs_emit_at(buf, len, "UNKNOWN ROLE x%x",
nrport->port_role);
len += sysfs_emit_at(buf, len, "%s\n", statep);
if (len >= PAGE_SIZE - 1)
break;
}
spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags);
if (!lport)
goto buffer_done;
len += sysfs_emit_at(buf, len, "\nNVME Statistics\n");
len += sysfs_emit_at(buf, len,
"LS: Xmt %010x Cmpl %010x Abort %08x\n",
atomic_read(&lport->fc4NvmeLsRequests),
atomic_read(&lport->fc4NvmeLsCmpls),
atomic_read(&lport->xmt_ls_abort));
len += sysfs_emit_at(buf, len,
"LS XMIT: Err %08x CMPL: xb %08x Err %08x\n",
atomic_read(&lport->xmt_ls_err),
atomic_read(&lport->cmpl_ls_xb),
atomic_read(&lport->cmpl_ls_err));
totin = 0;
totout = 0;
for (i = 0; i < phba->cfg_hdw_queue; i++) {
cstat = &phba->sli4_hba.hdwq[i].nvme_cstat;
tot = cstat->io_cmpls;
totin += tot;
data1 = cstat->input_requests;
data2 = cstat->output_requests;
data3 = cstat->control_requests;
totout += (data1 + data2 + data3);
}
len += sysfs_emit_at(buf, len,
"Total FCP Cmpl %016llx Issue %016llx OutIO %016llx\n",
totin, totout, totout - totin);
len += sysfs_emit_at(buf, len,
"\tabort %08x noxri %08x nondlp %08x qdepth %08x wqerr %08x err %08x\n",
atomic_read(&lport->xmt_fcp_abort),
atomic_read(&lport->xmt_fcp_noxri),
atomic_read(&lport->xmt_fcp_bad_ndlp),
atomic_read(&lport->xmt_fcp_qdepth),
atomic_read(&lport->xmt_fcp_wqerr),
atomic_read(&lport->xmt_fcp_err));
len += sysfs_emit_at(buf, len,
"FCP CMPL: xb %08x Err %08x\n",
atomic_read(&lport->cmpl_fcp_xb),
atomic_read(&lport->cmpl_fcp_err));
buffer_done:
if (unlikely(len >= (PAGE_SIZE - 1))) {
lpfc_printf_log(phba, KERN_INFO, LOG_NVME,
"6314 Catching potential buffer "
"overflow > PAGE_SIZE = %lu bytes\n",
PAGE_SIZE);
strscpy(buf + PAGE_SIZE - 1 - sizeof(LPFC_INFO_MORE_STR),
LPFC_INFO_MORE_STR,
sizeof(LPFC_INFO_MORE_STR) + 1);
}
return len;
}
static ssize_t
lpfc_scsi_stat_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = shost_priv(shost);
struct lpfc_hba *phba = vport->phba;
int len;
struct lpfc_fc4_ctrl_stat *cstat;
u64 data1, data2, data3;
u64 tot, totin, totout;
int i;
if (!(vport->cfg_enable_fc4_type & LPFC_ENABLE_FCP) ||
(phba->sli_rev != LPFC_SLI_REV4))
return 0;
len = sysfs_emit(buf, "SCSI HDWQ Statistics\n");
totin = 0;
totout = 0;
for (i = 0; i < phba->cfg_hdw_queue; i++) {
cstat = &phba->sli4_hba.hdwq[i].scsi_cstat;
tot = cstat->io_cmpls;
totin += tot;
data1 = cstat->input_requests;
data2 = cstat->output_requests;
data3 = cstat->control_requests;
totout += (data1 + data2 + data3);
len += sysfs_emit_at(buf, len,
"HDWQ (%d): Rd %016llx Wr %016llx IO %016llx ",
i, data1, data2, data3);
len += sysfs_emit_at(buf, len,
"Cmpl %016llx OutIO %016llx\n",
tot, ((data1 + data2 + data3) - tot));
if (len >= PAGE_SIZE - 1)
break;
}
len += sysfs_emit_at(buf, len,
"Total FCP Cmpl %016llx Issue %016llx OutIO %016llx\n",
totin, totout, totout - totin);
return len;
}
static ssize_t
lpfc_bg_info_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
if (phba->cfg_enable_bg) {
if (phba->sli3_options & LPFC_SLI3_BG_ENABLED)
return scnprintf(buf, PAGE_SIZE,
"BlockGuard Enabled\n");
else
return scnprintf(buf, PAGE_SIZE,
"BlockGuard Not Supported\n");
} else
return scnprintf(buf, PAGE_SIZE,
"BlockGuard Disabled\n");
}
static ssize_t
lpfc_bg_guard_err_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
return scnprintf(buf, PAGE_SIZE, "%llu\n",
(unsigned long long)phba->bg_guard_err_cnt);
}
static ssize_t
lpfc_bg_apptag_err_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
return scnprintf(buf, PAGE_SIZE, "%llu\n",
(unsigned long long)phba->bg_apptag_err_cnt);
}
static ssize_t
lpfc_bg_reftag_err_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
return scnprintf(buf, PAGE_SIZE, "%llu\n",
(unsigned long long)phba->bg_reftag_err_cnt);
}
/**
* lpfc_info_show - Return some pci info about the host in ascii
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the formatted text from lpfc_info().
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_info_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *host = class_to_shost(dev);
return scnprintf(buf, PAGE_SIZE, "%s\n", lpfc_info(host));
}
/**
* lpfc_serialnum_show - Return the hba serial number in ascii
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the formatted text serial number.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_serialnum_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
return scnprintf(buf, PAGE_SIZE, "%s\n", phba->SerialNumber);
}
/**
* lpfc_temp_sensor_show - Return the temperature sensor level
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the formatted support level.
*
* Description:
* Returns a number indicating the temperature sensor level currently
* supported, zero or one in ascii.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_temp_sensor_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
return scnprintf(buf, PAGE_SIZE, "%d\n", phba->temp_sensor_support);
}
/**
* lpfc_modeldesc_show - Return the model description of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd model description.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_modeldesc_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
return scnprintf(buf, PAGE_SIZE, "%s\n", phba->ModelDesc);
}
/**
* lpfc_modelname_show - Return the model name of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd model name.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_modelname_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
return scnprintf(buf, PAGE_SIZE, "%s\n", phba->ModelName);
}
/**
* lpfc_programtype_show - Return the program type of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd program type.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_programtype_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
return scnprintf(buf, PAGE_SIZE, "%s\n", phba->ProgramType);
}
/**
* lpfc_vportnum_show - Return the port number in ascii of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains scsi vpd program type.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_vportnum_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
return scnprintf(buf, PAGE_SIZE, "%s\n", phba->Port);
}
/**
* lpfc_fwrev_show - Return the firmware rev running in the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd program type.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_fwrev_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
uint32_t if_type;
uint8_t sli_family;
char fwrev[FW_REV_STR_SIZE];
int len;
lpfc_decode_firmware_rev(phba, fwrev, 1);
if_type = phba->sli4_hba.pc_sli4_params.if_type;
sli_family = phba->sli4_hba.pc_sli4_params.sli_family;
if (phba->sli_rev < LPFC_SLI_REV4)
len = scnprintf(buf, PAGE_SIZE, "%s, sli-%d\n",
fwrev, phba->sli_rev);
else
len = scnprintf(buf, PAGE_SIZE, "%s, sli-%d:%d:%x\n",
fwrev, phba->sli_rev, if_type, sli_family);
return len;
}
/**
* lpfc_hdw_show - Return the jedec information about the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd program type.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_hdw_show(struct device *dev, struct device_attribute *attr, char *buf)
{
char hdw[9];
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
lpfc_vpd_t *vp = &phba->vpd;
lpfc_jedec_to_ascii(vp->rev.biuRev, hdw);
return scnprintf(buf, PAGE_SIZE, "%s %08x %08x\n", hdw,
vp->rev.smRev, vp->rev.smFwRev);
}
/**
* lpfc_option_rom_version_show - Return the adapter ROM FCode version
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the ROM and FCode ascii strings.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_option_rom_version_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
char fwrev[FW_REV_STR_SIZE];
if (phba->sli_rev < LPFC_SLI_REV4)
return scnprintf(buf, PAGE_SIZE, "%s\n",
phba->OptionROMVersion);
lpfc_decode_firmware_rev(phba, fwrev, 1);
return scnprintf(buf, PAGE_SIZE, "%s\n", fwrev);
}
/**
* lpfc_link_state_show - Return the link state of the port
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains text describing the state of the link.
*
* Notes:
* The switch statement has no default so zero will be returned.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_link_state_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
int len = 0;
switch (phba->link_state) {
case LPFC_LINK_UNKNOWN:
case LPFC_WARM_START:
case LPFC_INIT_START:
case LPFC_INIT_MBX_CMDS:
case LPFC_LINK_DOWN:
case LPFC_HBA_ERROR:
if (test_bit(LINK_DISABLED, &phba->hba_flag))
len += scnprintf(buf + len, PAGE_SIZE-len,
"Link Down - User disabled\n");
else
len += scnprintf(buf + len, PAGE_SIZE-len,
"Link Down\n");
break;
case LPFC_LINK_UP:
case LPFC_CLEAR_LA:
case LPFC_HBA_READY:
len += scnprintf(buf + len, PAGE_SIZE-len, "Link Up - ");
switch (vport->port_state) {
case LPFC_LOCAL_CFG_LINK:
len += scnprintf(buf + len, PAGE_SIZE-len,
"Configuring Link\n");
break;
case LPFC_FDISC:
case LPFC_FLOGI:
case LPFC_FABRIC_CFG_LINK:
case LPFC_NS_REG:
case LPFC_NS_QRY:
case LPFC_BUILD_DISC_LIST:
case LPFC_DISC_AUTH:
len += scnprintf(buf + len, PAGE_SIZE - len,
"Discovery\n");
break;
case LPFC_VPORT_READY:
len += scnprintf(buf + len, PAGE_SIZE - len,
"Ready\n");
break;
case LPFC_VPORT_FAILED:
len += scnprintf(buf + len, PAGE_SIZE - len,
"Failed\n");
break;
case LPFC_VPORT_UNKNOWN:
len += scnprintf(buf + len, PAGE_SIZE - len,
"Unknown\n");
break;
}
if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
if (test_bit(FC_PUBLIC_LOOP, &vport->fc_flag))
len += scnprintf(buf + len, PAGE_SIZE-len,
" Public Loop\n");
else
len += scnprintf(buf + len, PAGE_SIZE-len,
" Private Loop\n");
} else {
if (test_bit(FC_FABRIC, &vport->fc_flag)) {
if (phba->sli_rev == LPFC_SLI_REV4 &&
vport->port_type == LPFC_PHYSICAL_PORT &&
phba->sli4_hba.fawwpn_flag &
LPFC_FAWWPN_FABRIC)
len += scnprintf(buf + len,
PAGE_SIZE - len,
" Fabric FA-PWWN\n");
else
len += scnprintf(buf + len,
PAGE_SIZE - len,
" Fabric\n");
} else {
len += scnprintf(buf + len, PAGE_SIZE-len,
" Point-2-Point\n");
}
}
}
if ((phba->sli_rev == LPFC_SLI_REV4) &&
((bf_get(lpfc_sli_intf_if_type,
&phba->sli4_hba.sli_intf) ==
LPFC_SLI_INTF_IF_TYPE_6))) {
struct lpfc_trunk_link link = phba->trunk_link;
if (bf_get(lpfc_conf_trunk_port0, &phba->sli4_hba))
len += scnprintf(buf + len, PAGE_SIZE - len,
"Trunk port 0: Link %s %s\n",
(link.link0.state == LPFC_LINK_UP) ?
"Up" : "Down. ",
trunk_errmsg[link.link0.fault]);
if (bf_get(lpfc_conf_trunk_port1, &phba->sli4_hba))
len += scnprintf(buf + len, PAGE_SIZE - len,
"Trunk port 1: Link %s %s\n",
(link.link1.state == LPFC_LINK_UP) ?
"Up" : "Down. ",
trunk_errmsg[link.link1.fault]);
if (bf_get(lpfc_conf_trunk_port2, &phba->sli4_hba))
len += scnprintf(buf + len, PAGE_SIZE - len,
"Trunk port 2: Link %s %s\n",
(link.link2.state == LPFC_LINK_UP) ?
"Up" : "Down. ",
trunk_errmsg[link.link2.fault]);
if (bf_get(lpfc_conf_trunk_port3, &phba->sli4_hba))
len += scnprintf(buf + len, PAGE_SIZE - len,
"Trunk port 3: Link %s %s\n",
(link.link3.state == LPFC_LINK_UP) ?
"Up" : "Down. ",
trunk_errmsg[link.link3.fault]);
}
return len;
}
/**
* lpfc_sli4_protocol_show - Return the fip mode of the HBA
* @dev: class unused variable.
* @attr: device attribute, not used.
* @buf: on return contains the module description text.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_sli4_protocol_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
if (phba->sli_rev < LPFC_SLI_REV4)
return scnprintf(buf, PAGE_SIZE, "fc\n");
if (phba->sli4_hba.lnk_info.lnk_dv == LPFC_LNK_DAT_VAL) {
if (phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_GE)
return scnprintf(buf, PAGE_SIZE, "fcoe\n");
if (phba->sli4_hba.lnk_info.lnk_tp == LPFC_LNK_TYPE_FC)
return scnprintf(buf, PAGE_SIZE, "fc\n");
}
return scnprintf(buf, PAGE_SIZE, "unknown\n");
}
/**
* lpfc_oas_supported_show - Return whether or not Optimized Access Storage
* (OAS) is supported.
* @dev: class unused variable.
* @attr: device attribute, not used.
* @buf: on return contains the module description text.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_oas_supported_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
struct lpfc_hba *phba = vport->phba;
return scnprintf(buf, PAGE_SIZE, "%d\n",
phba->sli4_hba.pc_sli4_params.oas_supported);
}
/**
* lpfc_link_state_store - Transition the link_state on an HBA port
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: one or more lpfc_polling_flags values.
* @count: not used.
*
* Returns:
* -EINVAL if the buffer is not "up" or "down"
* return from link state change function if non-zero
* length of the buf on success
**/
static ssize_t
lpfc_link_state_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
int status = -EINVAL;
if ((strncmp(buf, "up", sizeof("up") - 1) == 0) &&
(phba->link_state == LPFC_LINK_DOWN))
status = phba->lpfc_hba_init_link(phba, MBX_NOWAIT);
else if ((strncmp(buf, "down", sizeof("down") - 1) == 0) &&
(phba->link_state >= LPFC_LINK_UP))
status = phba->lpfc_hba_down_link(phba, MBX_NOWAIT);
if (status == 0)
return strlen(buf);
else
return status;
}
/**
* lpfc_num_discovered_ports_show - Return sum of mapped and unmapped vports
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the sum of fc mapped and unmapped.
*
* Description:
* Returns the ascii text number of the sum of the fc mapped and unmapped
* vport counts.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_num_discovered_ports_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
return scnprintf(buf, PAGE_SIZE, "%d\n",
atomic_read(&vport->fc_map_cnt) +
atomic_read(&vport->fc_unmap_cnt));
}
/**
* lpfc_issue_lip - Misnomer, name carried over from long ago
* @shost: Scsi_Host pointer.
*
* Description:
* Bring the link down gracefully then re-init the link. The firmware will
* re-init the fiber channel interface as required. Does not issue a LIP.
*
* Returns:
* -EPERM port offline or management commands are being blocked
* -ENOMEM cannot allocate memory for the mailbox command
* -EIO error sending the mailbox command
* zero for success
**/
static int
lpfc_issue_lip(struct Scsi_Host *shost)
{
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
LPFC_MBOXQ_t *pmboxq;
int mbxstatus = MBXERR_ERROR;
/*
* If the link is offline, disabled or BLOCK_MGMT_IO
* it doesn't make any sense to allow issue_lip
*/
if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag) ||
test_bit(LINK_DISABLED, &phba->hba_flag) ||
(phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO))
return -EPERM;
pmboxq = mempool_alloc(phba->mbox_mem_pool,GFP_KERNEL);
if (!pmboxq)
return -ENOMEM;
memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK;
pmboxq->u.mb.mbxOwner = OWN_HOST;
if (test_bit(FC_PT2PT, &vport->fc_flag))
clear_bit(FC_PT2PT_NO_NVME, &vport->fc_flag);
mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO * 2);
if ((mbxstatus == MBX_SUCCESS) &&
(pmboxq->u.mb.mbxStatus == 0 ||
pmboxq->u.mb.mbxStatus == MBXERR_LINK_DOWN)) {
memset((void *)pmboxq, 0, sizeof (LPFC_MBOXQ_t));
lpfc_init_link(phba, pmboxq, phba->cfg_topology,
phba->cfg_link_speed);
mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq,
phba->fc_ratov * 2);
if ((mbxstatus == MBX_SUCCESS) &&
(pmboxq->u.mb.mbxStatus == MBXERR_SEC_NO_PERMISSION))
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"2859 SLI authentication is required "
"for INIT_LINK but has not done yet\n");
}
lpfc_set_loopback_flag(phba);
if (mbxstatus != MBX_TIMEOUT)
mempool_free(pmboxq, phba->mbox_mem_pool);
if (mbxstatus == MBXERR_ERROR)
return -EIO;
return 0;
}
int
lpfc_emptyq_wait(struct lpfc_hba *phba, struct list_head *q, spinlock_t *lock)
{
int cnt = 0;
spin_lock_irq(lock);
while (!list_empty(q)) {
spin_unlock_irq(lock);
msleep(20);
if (cnt++ > 250) { /* 5 secs */
lpfc_printf_log(phba, KERN_WARNING, LOG_INIT,
"0466 Outstanding IO when "
"bringing Adapter offline\n");
return 0;
}
spin_lock_irq(lock);
}
spin_unlock_irq(lock);
return 1;
}
/**
* lpfc_do_offline - Issues a mailbox command to bring the link down
* @phba: lpfc_hba pointer.
* @type: LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL.
*
* Notes:
* Assumes any error from lpfc_do_offline() will be negative.
* Can wait up to 5 seconds for the port ring buffers count
* to reach zero, prints a warning if it is not zero and continues.
* lpfc_workq_post_event() returns a non-zero return code if call fails.
*
* Returns:
* -EIO error posting the event
* zero for success
**/
static int
lpfc_do_offline(struct lpfc_hba *phba, uint32_t type)
{
struct completion online_compl;
struct lpfc_queue *qp = NULL;
struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
int status = 0;
int i;
int rc;
init_completion(&online_compl);
rc = lpfc_workq_post_event(phba, &status, &online_compl,
LPFC_EVT_OFFLINE_PREP);
if (rc == 0)
return -ENOMEM;
wait_for_completion(&online_compl);
if (status != 0)
return -EIO;
psli = &phba->sli;
/*
* If freeing the queues have already started, don't access them.
* Otherwise set FREE_WAIT to indicate that queues are being used
* to hold the freeing process until we finish.
*/
spin_lock_irq(&phba->hbalock);
if (!(psli->sli_flag & LPFC_QUEUE_FREE_INIT)) {
psli->sli_flag |= LPFC_QUEUE_FREE_WAIT;
} else {
spin_unlock_irq(&phba->hbalock);
goto skip_wait;
}
spin_unlock_irq(&phba->hbalock);
/* Wait a little for things to settle down, but not
* long enough for dev loss timeout to expire.
*/
if (phba->sli_rev != LPFC_SLI_REV4) {
for (i = 0; i < psli->num_rings; i++) {
pring = &psli->sli3_ring[i];
if (!lpfc_emptyq_wait(phba, &pring->txcmplq,
&phba->hbalock))
goto out;
}
} else {
list_for_each_entry(qp, &phba->sli4_hba.lpfc_wq_list, wq_list) {
pring = qp->pring;
if (!pring)
continue;
if (!lpfc_emptyq_wait(phba, &pring->txcmplq,
&pring->ring_lock))
goto out;
}
}
out:
spin_lock_irq(&phba->hbalock);
psli->sli_flag &= ~LPFC_QUEUE_FREE_WAIT;
spin_unlock_irq(&phba->hbalock);
skip_wait:
init_completion(&online_compl);
rc = lpfc_workq_post_event(phba, &status, &online_compl, type);
if (rc == 0)
return -ENOMEM;
wait_for_completion(&online_compl);
if (status != 0)
return -EIO;
return 0;
}
/**
* lpfc_reset_pci_bus - resets PCI bridge controller's secondary bus of an HBA
* @phba: lpfc_hba pointer.
*
* Description:
* Issues a PCI secondary bus reset for the phba->pcidev.
*
* Notes:
* First walks the bus_list to ensure only PCI devices with Emulex
* vendor id, device ids that support hot reset, only one occurrence
* of function 0, and all ports on the bus are in offline mode to ensure the
* hot reset only affects one valid HBA.
*
* Returns:
* -ENOTSUPP, cfg_enable_hba_reset must be of value 2
* -ENODEV, NULL ptr to pcidev
* -EBADSLT, detected invalid device
* -EBUSY, port is not in offline state
* 0, successful
*/
static int
lpfc_reset_pci_bus(struct lpfc_hba *phba)
{
struct pci_dev *pdev = phba->pcidev;
struct Scsi_Host *shost = NULL;
struct lpfc_hba *phba_other = NULL;
struct pci_dev *ptr = NULL;
int res;
if (phba->cfg_enable_hba_reset != 2)
return -ENOTSUPP;
if (!pdev) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "8345 pdev NULL!\n");
return -ENODEV;
}
res = lpfc_check_pci_resettable(phba);
if (res)
return res;
/* Walk the list of devices on the pci_dev's bus */
list_for_each_entry(ptr, &pdev->bus->devices, bus_list) {
/* Check port is offline */
shost = pci_get_drvdata(ptr);
if (shost) {
phba_other =
((struct lpfc_vport *)shost->hostdata)->phba;
if (!test_bit(FC_OFFLINE_MODE,
&phba_other->pport->fc_flag)) {
lpfc_printf_log(phba_other, KERN_INFO, LOG_INIT,
"8349 WWPN = 0x%02x%02x%02x%02x"
"%02x%02x%02x%02x is not "
"offline!\n",
phba_other->wwpn[0],
phba_other->wwpn[1],
phba_other->wwpn[2],
phba_other->wwpn[3],
phba_other->wwpn[4],
phba_other->wwpn[5],
phba_other->wwpn[6],
phba_other->wwpn[7]);
return -EBUSY;
}
}
}
/* Issue PCI bus reset */
res = pci_reset_bus(pdev);
if (res) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"8350 PCI reset bus failed: %d\n", res);
}
return res;
}
/**
* lpfc_selective_reset - Offline then onlines the port
* @phba: lpfc_hba pointer.
*
* Description:
* If the port is configured to allow a reset then the hba is brought
* offline then online.
*
* Notes:
* Assumes any error from lpfc_do_offline() will be negative.
* Do not make this function static.
*
* Returns:
* lpfc_do_offline() return code if not zero
* -EIO reset not configured or error posting the event
* zero for success
**/
int
lpfc_selective_reset(struct lpfc_hba *phba)
{
struct completion online_compl;
int status = 0;
int rc;
if (!phba->cfg_enable_hba_reset)
return -EACCES;
if (!test_bit(FC_OFFLINE_MODE, &phba->pport->fc_flag)) {
status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
if (status != 0)
return status;
}
init_completion(&online_compl);
rc = lpfc_workq_post_event(phba, &status, &online_compl,
LPFC_EVT_ONLINE);
if (rc == 0)
return -ENOMEM;
wait_for_completion(&online_compl);
if (status != 0)
return -EIO;
return 0;
}
/**
* lpfc_issue_reset - Selectively resets an adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing the string "selective".
* @count: unused variable.
*
* Description:
* If the buf contains the string "selective" then lpfc_selective_reset()
* is called to perform the reset.
*
* Notes:
* Assumes any error from lpfc_selective_reset() will be negative.
* If lpfc_selective_reset() returns zero then the length of the buffer
* is returned which indicates success
*
* Returns:
* -EINVAL if the buffer does not contain the string "selective"
* length of buf if lpfc-selective_reset() if the call succeeds
* return value of lpfc_selective_reset() if the call fails
**/
static ssize_t
lpfc_issue_reset(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
int status = -EINVAL;
if (!phba->cfg_enable_hba_reset)
return -EACCES;
if (strncmp(buf, "selective", sizeof("selective") - 1) == 0)
status = phba->lpfc_selective_reset(phba);
if (status == 0)
return strlen(buf);
else
return status;
}
/**
* lpfc_sli4_pdev_status_reg_wait - Wait for pdev status register for readiness
* @phba: lpfc_hba pointer.
*
* Description:
* SLI4 interface type-2 device to wait on the sliport status register for
* the readiness after performing a firmware reset.
*
* Returns:
* zero for success, -EPERM when port does not have privilege to perform the
* reset, -EIO when port timeout from recovering from the reset.
*
* Note:
* As the caller will interpret the return code by value, be careful in making
* change or addition to return codes.
**/
int
lpfc_sli4_pdev_status_reg_wait(struct lpfc_hba *phba)
{
struct lpfc_register portstat_reg = {0};
int i;
msleep(100);
if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
&portstat_reg.word0))
return -EIO;
/* verify if privileged for the request operation */
if (!bf_get(lpfc_sliport_status_rn, &portstat_reg) &&
!bf_get(lpfc_sliport_status_err, &portstat_reg))
return -EPERM;
/* There is no point to wait if the port is in an unrecoverable
* state.
*/
if (lpfc_sli4_unrecoverable_port(&portstat_reg))
return -EIO;
/* wait for the SLI port firmware ready after firmware reset */
for (i = 0; i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT; i++) {
msleep(10);
if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr,
&portstat_reg.word0))
continue;
if (!bf_get(lpfc_sliport_status_err, &portstat_reg))
continue;
if (!bf_get(lpfc_sliport_status_rn, &portstat_reg))
continue;
if (!bf_get(lpfc_sliport_status_rdy, &portstat_reg))
continue;
break;
}
if (i < LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT)
return 0;
else
return -EIO;
}
/**
* lpfc_sli4_pdev_reg_request - Request physical dev to perform a register acc
* @phba: lpfc_hba pointer.
* @opcode: The sli4 config command opcode.
*
* Description:
* Request SLI4 interface type-2 device to perform a physical register set
* access.
*
* Returns:
* zero for success
**/
static ssize_t
lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode)
{
struct completion online_compl;
struct pci_dev *pdev = phba->pcidev;
unsigned long before_fc_flag;
uint32_t sriov_nr_virtfn;
uint32_t reg_val;
int status = 0, rc = 0;
int job_posted = 1, sriov_err;
if (!phba->cfg_enable_hba_reset)
return -EACCES;
if ((phba->sli_rev < LPFC_SLI_REV4) ||
(bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) <
LPFC_SLI_INTF_IF_TYPE_2))
return -EPERM;
/* Keep state if we need to restore back */
before_fc_flag = phba->pport->fc_flag;
sriov_nr_virtfn = phba->cfg_sriov_nr_virtfn;
if (opcode == LPFC_FW_DUMP) {
init_completion(&online_compl);
phba->fw_dump_cmpl = &online_compl;
} else {
/* Disable SR-IOV virtual functions if enabled */
if (phba->cfg_sriov_nr_virtfn) {
pci_disable_sriov(pdev);
phba->cfg_sriov_nr_virtfn = 0;
}
status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
if (status != 0)
return status;
/* wait for the device to be quiesced before firmware reset */
msleep(100);
}
reg_val = readl(phba->sli4_hba.conf_regs_memmap_p +
LPFC_CTL_PDEV_CTL_OFFSET);
if (opcode == LPFC_FW_DUMP)
reg_val |= LPFC_FW_DUMP_REQUEST;
else if (opcode == LPFC_FW_RESET)
reg_val |= LPFC_CTL_PDEV_CTL_FRST;
else if (opcode == LPFC_DV_RESET)
reg_val |= LPFC_CTL_PDEV_CTL_DRST;
writel(reg_val, phba->sli4_hba.conf_regs_memmap_p +
LPFC_CTL_PDEV_CTL_OFFSET);
/* flush */
readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET);
/* delay driver action following IF_TYPE_2 reset */
rc = lpfc_sli4_pdev_status_reg_wait(phba);
if (rc == -EPERM) {
/* no privilege for reset */
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"3150 No privilege to perform the requested "
"access: x%x\n", reg_val);
} else if (rc == -EIO) {
/* reset failed, there is nothing more we can do */
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"3153 Fail to perform the requested "
"access: x%x\n", reg_val);
if (phba->fw_dump_cmpl)
phba->fw_dump_cmpl = NULL;
return rc;
}
/* keep the original port state */
if (test_bit(FC_OFFLINE_MODE, &before_fc_flag)) {
if (phba->fw_dump_cmpl)
phba->fw_dump_cmpl = NULL;
goto out;
}
/* Firmware dump will trigger an HA_ERATT event, and
* lpfc_handle_eratt_s4 routine already handles bringing the port back
* online.
*/
if (opcode == LPFC_FW_DUMP) {
wait_for_completion(phba->fw_dump_cmpl);
} else {
init_completion(&online_compl);
job_posted = lpfc_workq_post_event(phba, &status, &online_compl,
LPFC_EVT_ONLINE);
if (!job_posted)
goto out;
wait_for_completion(&online_compl);
}
out:
/* in any case, restore the virtual functions enabled as before */
if (sriov_nr_virtfn) {
/* If fw_dump was performed, first disable to clean up */
if (opcode == LPFC_FW_DUMP) {
pci_disable_sriov(pdev);
phba->cfg_sriov_nr_virtfn = 0;
}
sriov_err =
lpfc_sli_probe_sriov_nr_virtfn(phba, sriov_nr_virtfn);
if (!sriov_err)
phba->cfg_sriov_nr_virtfn = sriov_nr_virtfn;
}
/* return proper error code */
if (!rc) {
if (!job_posted)
rc = -ENOMEM;
else if (status)
rc = -EIO;
}
return rc;
}
/**
* lpfc_nport_evt_cnt_show - Return the number of nport events
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the ascii number of nport events.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_nport_evt_cnt_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
return scnprintf(buf, PAGE_SIZE, "%d\n", phba->nport_event_cnt);
}
static int
lpfc_set_trunking(struct lpfc_hba *phba, char *buff_out)
{
LPFC_MBOXQ_t *mbox = NULL;
u32 payload_len;
unsigned long val = 0;
char *pval = NULL;
int rc = 0;
if (!strncmp("enable", buff_out,
strlen("enable"))) {
pval = buff_out + strlen("enable") + 1;
rc = kstrtoul(pval, 0, &val);
if (rc)
return rc; /* Invalid number */
} else if (!strncmp("disable", buff_out,
strlen("disable"))) {
val = 0;
} else {
return -EINVAL; /* Invalid command */
}
switch (val) {
case 0:
val = 0x0; /* Disable */
break;
case 2:
val = 0x1; /* Enable two port trunk */
break;
case 4:
val = 0x2; /* Enable four port trunk */
break;
default:
return -EINVAL;
}
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
"0070 Set trunk mode with val %ld ", val);
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox)
return -ENOMEM;
payload_len = sizeof(struct lpfc_mbx_set_trunk_mode) -
sizeof(struct lpfc_sli4_cfg_mhdr);
lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
LPFC_MBOX_OPCODE_FCOE_FC_SET_TRUNK_MODE,
payload_len, LPFC_SLI4_MBX_EMBED);
bf_set(lpfc_mbx_set_trunk_mode,
&mbox->u.mqe.un.set_trunk_mode,
val);
rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
if (rc)
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
"0071 Set trunk mode failed with status: %d",
rc);
mempool_free(mbox, phba->mbox_mem_pool);
return 0;
}
static ssize_t
lpfc_xcvr_data_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
struct lpfc_hba *phba = vport->phba;
int rc;
int len = 0;
struct lpfc_rdp_context *rdp_context;
u16 temperature;
u16 rx_power;
u16 tx_bias;
u16 tx_power;
u16 vcc;
char chbuf[128];
u16 wavelength = 0;
struct sff_trasnceiver_codes_byte7 *trasn_code_byte7;
/* Get transceiver information */
rdp_context = kmalloc_obj(*rdp_context);
if (!rdp_context) {
len = scnprintf(buf, PAGE_SIZE - len,
"SPF info NA: alloc failure\n");
return len;
}
rc = lpfc_get_sfp_info_wait(phba, rdp_context);
if (rc) {
len = scnprintf(buf, PAGE_SIZE - len, "SFP info NA:\n");
goto out_free_rdp;
}
strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_NAME], 16);
len = scnprintf(buf, PAGE_SIZE - len, "VendorName:\t%s\n", chbuf);
len += scnprintf(buf + len, PAGE_SIZE - len,
"VendorOUI:\t%02x-%02x-%02x\n",
(uint8_t)rdp_context->page_a0[SSF_VENDOR_OUI],
(uint8_t)rdp_context->page_a0[SSF_VENDOR_OUI + 1],
(uint8_t)rdp_context->page_a0[SSF_VENDOR_OUI + 2]);
strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_PN], 16);
len += scnprintf(buf + len, PAGE_SIZE - len, "VendorPN:\t%s\n", chbuf);
strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_SN], 16);
len += scnprintf(buf + len, PAGE_SIZE - len, "VendorSN:\t%s\n", chbuf);
strscpy(chbuf, &rdp_context->page_a0[SSF_VENDOR_REV], 4);
len += scnprintf(buf + len, PAGE_SIZE - len, "VendorRev:\t%s\n", chbuf);
strscpy(chbuf, &rdp_context->page_a0[SSF_DATE_CODE], 8);
len += scnprintf(buf + len, PAGE_SIZE - len, "DateCode:\t%s\n", chbuf);
len += scnprintf(buf + len, PAGE_SIZE - len, "Identifier:\t%xh\n",
(uint8_t)rdp_context->page_a0[SSF_IDENTIFIER]);
len += scnprintf(buf + len, PAGE_SIZE - len, "ExtIdentifier:\t%xh\n",
(uint8_t)rdp_context->page_a0[SSF_EXT_IDENTIFIER]);
len += scnprintf(buf + len, PAGE_SIZE - len, "Connector:\t%xh\n",
(uint8_t)rdp_context->page_a0[SSF_CONNECTOR]);
wavelength = (rdp_context->page_a0[SSF_WAVELENGTH_B1] << 8) |
rdp_context->page_a0[SSF_WAVELENGTH_B0];
len += scnprintf(buf + len, PAGE_SIZE - len, "Wavelength:\t%d nm\n",
wavelength);
trasn_code_byte7 = (struct sff_trasnceiver_codes_byte7 *)
&rdp_context->page_a0[SSF_TRANSCEIVER_CODE_B7];
len += scnprintf(buf + len, PAGE_SIZE - len, "Speeds: \t");
if (*(uint8_t *)trasn_code_byte7 == 0) {
len += scnprintf(buf + len, PAGE_SIZE - len, "Unknown\n");
} else {
if (trasn_code_byte7->fc_sp_100MB)
len += scnprintf(buf + len, PAGE_SIZE - len, "1 ");
if (trasn_code_byte7->fc_sp_200mb)
len += scnprintf(buf + len, PAGE_SIZE - len, "2 ");
if (trasn_code_byte7->fc_sp_400MB)
len += scnprintf(buf + len, PAGE_SIZE - len, "4 ");
if (trasn_code_byte7->fc_sp_800MB)
len += scnprintf(buf + len, PAGE_SIZE - len, "8 ");
if (trasn_code_byte7->fc_sp_1600MB)
len += scnprintf(buf + len, PAGE_SIZE - len, "16 ");
if (trasn_code_byte7->fc_sp_3200MB)
len += scnprintf(buf + len, PAGE_SIZE - len, "32 ");
if (trasn_code_byte7->speed_chk_ecc)
len += scnprintf(buf + len, PAGE_SIZE - len, "64 ");
len += scnprintf(buf + len, PAGE_SIZE - len, "GB\n");
}
temperature = (rdp_context->page_a2[SFF_TEMPERATURE_B1] << 8 |
rdp_context->page_a2[SFF_TEMPERATURE_B0]);
vcc = (rdp_context->page_a2[SFF_VCC_B1] << 8 |
rdp_context->page_a2[SFF_VCC_B0]);
tx_power = (rdp_context->page_a2[SFF_TXPOWER_B1] << 8 |
rdp_context->page_a2[SFF_TXPOWER_B0]);
tx_bias = (rdp_context->page_a2[SFF_TX_BIAS_CURRENT_B1] << 8 |
rdp_context->page_a2[SFF_TX_BIAS_CURRENT_B0]);
rx_power = (rdp_context->page_a2[SFF_RXPOWER_B1] << 8 |
rdp_context->page_a2[SFF_RXPOWER_B0]);
len += scnprintf(buf + len, PAGE_SIZE - len,
"Temperature:\tx%04x C\n", temperature);
len += scnprintf(buf + len, PAGE_SIZE - len, "Vcc:\t\tx%04x V\n", vcc);
len += scnprintf(buf + len, PAGE_SIZE - len,
"TxBiasCurrent:\tx%04x mA\n", tx_bias);
len += scnprintf(buf + len, PAGE_SIZE - len, "TxPower:\tx%04x mW\n",
tx_power);
len += scnprintf(buf + len, PAGE_SIZE - len, "RxPower:\tx%04x mW\n",
rx_power);
out_free_rdp:
kfree(rdp_context);
return len;
}
/**
* lpfc_board_mode_show - Return the state of the board
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the state of the adapter.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_board_mode_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
char * state;
if (phba->link_state == LPFC_HBA_ERROR)
state = "error";
else if (phba->link_state == LPFC_WARM_START)
state = "warm start";
else if (phba->link_state == LPFC_INIT_START)
state = "offline";
else
state = "online";
return scnprintf(buf, PAGE_SIZE, "%s\n", state);
}
/**
* lpfc_board_mode_store - Puts the hba in online, offline, warm or error state
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing one of the strings "online", "offline", "warm" or "error".
* @count: unused variable.
*
* Returns:
* -EACCES if enable hba reset not enabled
* -EINVAL if the buffer does not contain a valid string (see above)
* -EIO if lpfc_workq_post_event() or lpfc_do_offline() fails
* buf length greater than zero indicates success
**/
static ssize_t
lpfc_board_mode_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct completion online_compl;
char *board_mode_str = NULL;
int status = 0;
int rc;
if (!phba->cfg_enable_hba_reset) {
status = -EACCES;
goto board_mode_out;
}
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"3050 lpfc_board_mode set to %s\n", buf);
init_completion(&online_compl);
if(strncmp(buf, "online", sizeof("online") - 1) == 0) {
rc = lpfc_workq_post_event(phba, &status, &online_compl,
LPFC_EVT_ONLINE);
if (rc == 0) {
status = -ENOMEM;
goto board_mode_out;
}
wait_for_completion(&online_compl);
if (status)
status = -EIO;
} else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
else if (strncmp(buf, "warm", sizeof("warm") - 1) == 0)
if (phba->sli_rev == LPFC_SLI_REV4)
status = -EINVAL;
else
status = lpfc_do_offline(phba, LPFC_EVT_WARM_START);
else if (strncmp(buf, "error", sizeof("error") - 1) == 0)
if (phba->sli_rev == LPFC_SLI_REV4)
status = -EINVAL;
else
status = lpfc_do_offline(phba, LPFC_EVT_KILL);
else if (strncmp(buf, "dump", sizeof("dump") - 1) == 0)
status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_DUMP);
else if (strncmp(buf, "fw_reset", sizeof("fw_reset") - 1) == 0)
status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_RESET);
else if (strncmp(buf, "dv_reset", sizeof("dv_reset") - 1) == 0)
status = lpfc_sli4_pdev_reg_request(phba, LPFC_DV_RESET);
else if (strncmp(buf, "pci_bus_reset", sizeof("pci_bus_reset") - 1)
== 0)
status = lpfc_reset_pci_bus(phba);
else if (strncmp(buf, "heartbeat", sizeof("heartbeat") - 1) == 0)
lpfc_issue_hb_tmo(phba);
else if (strncmp(buf, "trunk", sizeof("trunk") - 1) == 0)
status = lpfc_set_trunking(phba, (char *)buf + sizeof("trunk"));
else
status = -EINVAL;
board_mode_out:
if (!status)
return strlen(buf);
else {
board_mode_str = strchr(buf, '\n');
if (board_mode_str)
*board_mode_str = '\0';
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"3097 Failed \"%s\", status(%d), "
"fc_flag(x%lx)\n",
buf, status, phba->pport->fc_flag);
return status;
}
}
/**
* lpfc_get_hba_info - Return various bits of informaton about the adapter
* @phba: pointer to the adapter structure.
* @mxri: max xri count.
* @axri: available xri count.
* @mrpi: max rpi count.
* @arpi: available rpi count.
* @mvpi: max vpi count.
* @avpi: available vpi count.
*
* Description:
* If an integer pointer for an count is not null then the value for the
* count is returned.
*
* Returns:
* zero on error
* one for success
**/
static int
lpfc_get_hba_info(struct lpfc_hba *phba,
uint32_t *mxri, uint32_t *axri,
uint32_t *mrpi, uint32_t *arpi,
uint32_t *mvpi, uint32_t *avpi)
{
LPFC_MBOXQ_t *pmboxq;
MAILBOX_t *pmb;
int rc = 0;
struct lpfc_sli4_hba *sli4_hba;
struct lpfc_max_cfg_param *max_cfg_param;
u16 rsrc_ext_cnt, rsrc_ext_size, max_vpi;
/*
* prevent udev from issuing mailbox commands until the port is
* configured.
*/
if (phba->link_state < LPFC_LINK_DOWN ||
!phba->mbox_mem_pool ||
(phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0)
return 0;
if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
return 0;
pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmboxq)
return 0;
memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
pmb = &pmboxq->u.mb;
pmb->mbxCommand = MBX_READ_CONFIG;
pmb->mbxOwner = OWN_HOST;
pmboxq->ctx_buf = NULL;
if (test_bit(FC_OFFLINE_MODE, &phba->pport->fc_flag))
rc = MBX_NOT_FINISHED;
else
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
if (rc != MBX_SUCCESS) {
if (rc != MBX_TIMEOUT)
mempool_free(pmboxq, phba->mbox_mem_pool);
return 0;
}
if (phba->sli_rev == LPFC_SLI_REV4) {
sli4_hba = &phba->sli4_hba;
max_cfg_param = &sli4_hba->max_cfg_param;
/* Normally, extents are not used */
if (!phba->sli4_hba.extents_in_use) {
if (mrpi)
*mrpi = max_cfg_param->max_rpi;
if (mxri)
*mxri = max_cfg_param->max_xri;
if (mvpi) {
max_vpi = max_cfg_param->max_vpi;
/* Limit the max we support */
if (max_vpi > LPFC_MAX_VPI)
max_vpi = LPFC_MAX_VPI;
*mvpi = max_vpi;
}
} else { /* Extents in use */
if (mrpi) {
if (lpfc_sli4_get_avail_extnt_rsrc(phba,
LPFC_RSC_TYPE_FCOE_RPI,
&rsrc_ext_cnt,
&rsrc_ext_size)) {
rc = 0;
goto free_pmboxq;
}
*mrpi = rsrc_ext_cnt * rsrc_ext_size;
}
if (mxri) {
if (lpfc_sli4_get_avail_extnt_rsrc(phba,
LPFC_RSC_TYPE_FCOE_XRI,
&rsrc_ext_cnt,
&rsrc_ext_size)) {
rc = 0;
goto free_pmboxq;
}
*mxri = rsrc_ext_cnt * rsrc_ext_size;
}
if (mvpi) {
if (lpfc_sli4_get_avail_extnt_rsrc(phba,
LPFC_RSC_TYPE_FCOE_VPI,
&rsrc_ext_cnt,
&rsrc_ext_size)) {
rc = 0;
goto free_pmboxq;
}
max_vpi = rsrc_ext_cnt * rsrc_ext_size;
/* Limit the max we support */
if (max_vpi > LPFC_MAX_VPI)
max_vpi = LPFC_MAX_VPI;
*mvpi = max_vpi;
}
}
} else {
if (mrpi)
*mrpi = pmb->un.varRdConfig.max_rpi;
if (arpi)
*arpi = pmb->un.varRdConfig.avail_rpi;
if (mxri)
*mxri = pmb->un.varRdConfig.max_xri;
if (axri)
*axri = pmb->un.varRdConfig.avail_xri;
if (mvpi)
*mvpi = pmb->un.varRdConfig.max_vpi;
if (avpi) {
/* avail_vpi is only valid if link is up and ready */
if (phba->link_state == LPFC_HBA_READY)
*avpi = pmb->un.varRdConfig.avail_vpi;
else
*avpi = pmb->un.varRdConfig.max_vpi;
}
}
/* Success */
rc = 1;
free_pmboxq:
mempool_free(pmboxq, phba->mbox_mem_pool);
return rc;
}
/**
* lpfc_max_rpi_show - Return maximum rpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the maximum rpi count in decimal or "Unknown".
*
* Description:
* Calls lpfc_get_hba_info() asking for just the mrpi count.
* If lpfc_get_hba_info() returns zero (failure) the buffer text is set
* to "Unknown" and the buffer length is returned, therefore the caller
* must check for "Unknown" in the buffer to detect a failure.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_max_rpi_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
uint32_t cnt;
if (lpfc_get_hba_info(phba, NULL, NULL, &cnt, NULL, NULL, NULL))
return scnprintf(buf, PAGE_SIZE, "%d\n", cnt);
return scnprintf(buf, PAGE_SIZE, "Unknown\n");
}
/**
* lpfc_used_rpi_show - Return maximum rpi minus available rpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing the used rpi count in decimal or "Unknown".
*
* Description:
* Calls lpfc_get_hba_info() asking for just the mrpi and arpi counts.
* If lpfc_get_hba_info() returns zero (failure) the buffer text is set
* to "Unknown" and the buffer length is returned, therefore the caller
* must check for "Unknown" in the buffer to detect a failure.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_used_rpi_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_sli4_hba *sli4_hba;
struct lpfc_max_cfg_param *max_cfg_param;
u32 cnt = 0, acnt = 0;
if (phba->sli_rev == LPFC_SLI_REV4) {
sli4_hba = &phba->sli4_hba;
max_cfg_param = &sli4_hba->max_cfg_param;
return scnprintf(buf, PAGE_SIZE, "%d\n",
max_cfg_param->rpi_used);
} else {
if (lpfc_get_hba_info(phba, NULL, NULL, &cnt, &acnt, NULL, NULL))
return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));
}
return scnprintf(buf, PAGE_SIZE, "Unknown\n");
}
/**
* lpfc_max_xri_show - Return maximum xri
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the maximum xri count in decimal or "Unknown".
*
* Description:
* Calls lpfc_get_hba_info() asking for just the mrpi count.
* If lpfc_get_hba_info() returns zero (failure) the buffer text is set
* to "Unknown" and the buffer length is returned, therefore the caller
* must check for "Unknown" in the buffer to detect a failure.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_max_xri_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
uint32_t cnt;
if (lpfc_get_hba_info(phba, &cnt, NULL, NULL, NULL, NULL, NULL))
return scnprintf(buf, PAGE_SIZE, "%d\n", cnt);
return scnprintf(buf, PAGE_SIZE, "Unknown\n");
}
/**
* lpfc_used_xri_show - Return maximum xpi minus the available xpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the used xri count in decimal or "Unknown".
*
* Description:
* Calls lpfc_get_hba_info() asking for just the mxri and axri counts.
* If lpfc_get_hba_info() returns zero (failure) the buffer text is set
* to "Unknown" and the buffer length is returned, therefore the caller
* must check for "Unknown" in the buffer to detect a failure.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_used_xri_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_sli4_hba *sli4_hba;
struct lpfc_max_cfg_param *max_cfg_param;
u32 cnt = 0, acnt = 0;
if (phba->sli_rev == LPFC_SLI_REV4) {
sli4_hba = &phba->sli4_hba;
max_cfg_param = &sli4_hba->max_cfg_param;
return scnprintf(buf, PAGE_SIZE, "%d\n",
max_cfg_param->xri_used);
} else {
if (lpfc_get_hba_info(phba, &cnt, &acnt, NULL, NULL, NULL, NULL))
return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));
}
return scnprintf(buf, PAGE_SIZE, "Unknown\n");
}
/**
* lpfc_max_vpi_show - Return maximum vpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the maximum vpi count in decimal or "Unknown".
*
* Description:
* Calls lpfc_get_hba_info() asking for just the mvpi count.
* If lpfc_get_hba_info() returns zero (failure) the buffer text is set
* to "Unknown" and the buffer length is returned, therefore the caller
* must check for "Unknown" in the buffer to detect a failure.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_max_vpi_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
uint32_t cnt;
if (lpfc_get_hba_info(phba, NULL, NULL, NULL, NULL, &cnt, NULL))
return scnprintf(buf, PAGE_SIZE, "%d\n", cnt);
return scnprintf(buf, PAGE_SIZE, "Unknown\n");
}
/**
* lpfc_used_vpi_show - Return maximum vpi minus the available vpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the used vpi count in decimal or "Unknown".
*
* Description:
* Calls lpfc_get_hba_info() asking for just the mvpi and avpi counts.
* If lpfc_get_hba_info() returns zero (failure) the buffer text is set
* to "Unknown" and the buffer length is returned, therefore the caller
* must check for "Unknown" in the buffer to detect a failure.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_used_vpi_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_sli4_hba *sli4_hba;
struct lpfc_max_cfg_param *max_cfg_param;
u32 cnt = 0, acnt = 0;
if (phba->sli_rev == LPFC_SLI_REV4) {
sli4_hba = &phba->sli4_hba;
max_cfg_param = &sli4_hba->max_cfg_param;
return scnprintf(buf, PAGE_SIZE, "%d\n",
max_cfg_param->vpi_used);
} else {
if (lpfc_get_hba_info(phba, NULL, NULL, NULL, NULL, &cnt, &acnt))
return scnprintf(buf, PAGE_SIZE, "%d\n", (cnt - acnt));
}
return scnprintf(buf, PAGE_SIZE, "Unknown\n");
}
/**
* lpfc_npiv_info_show - Return text about NPIV support for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: text that must be interpreted to determine if npiv is supported.
*
* Description:
* Buffer will contain text indicating npiv is not suppoerted on the port,
* the port is an NPIV physical port, or it is an npiv virtual port with
* the id of the vport.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_npiv_info_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
if (!(phba->max_vpi))
return scnprintf(buf, PAGE_SIZE, "NPIV Not Supported\n");
if (vport->port_type == LPFC_PHYSICAL_PORT)
return scnprintf(buf, PAGE_SIZE, "NPIV Physical\n");
return scnprintf(buf, PAGE_SIZE, "NPIV Virtual (VPI %d)\n", vport->vpi);
}
/**
* lpfc_poll_show - Return text about poll support for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the cfg_poll in hex.
*
* Notes:
* cfg_poll should be a lpfc_polling_flags type.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_poll_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
return scnprintf(buf, PAGE_SIZE, "%#x\n", phba->cfg_poll);
}
/**
* lpfc_poll_store - Set the value of cfg_poll for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: one or more lpfc_polling_flags values.
* @count: not used.
*
* Notes:
* buf contents converted to integer and checked for a valid value.
*
* Returns:
* -EINVAL if the buffer connot be converted or is out of range
* length of the buf on success
**/
static ssize_t
lpfc_poll_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
uint32_t creg_val;
uint32_t old_val;
int val=0;
if (!isdigit(buf[0]))
return -EINVAL;
if (sscanf(buf, "%i", &val) != 1)
return -EINVAL;
if ((val & 0x3) != val)
return -EINVAL;
if (phba->sli_rev == LPFC_SLI_REV4)
val = 0;
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"3051 lpfc_poll changed from %d to %d\n",
phba->cfg_poll, val);
spin_lock_irq(&phba->hbalock);
old_val = phba->cfg_poll;
if (val & ENABLE_FCP_RING_POLLING) {
if ((val & DISABLE_FCP_RING_INT) &&
!(old_val & DISABLE_FCP_RING_INT)) {
if (lpfc_readl(phba->HCregaddr, &creg_val)) {
spin_unlock_irq(&phba->hbalock);
return -EINVAL;
}
creg_val &= ~(HC_R0INT_ENA << LPFC_FCP_RING);
writel(creg_val, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
lpfc_poll_start_timer(phba);
}
} else if (val != 0x0) {
spin_unlock_irq(&phba->hbalock);
return -EINVAL;
}
if (!(val & DISABLE_FCP_RING_INT) &&
(old_val & DISABLE_FCP_RING_INT))
{
spin_unlock_irq(&phba->hbalock);
timer_delete(&phba->fcp_poll_timer);
spin_lock_irq(&phba->hbalock);
if (lpfc_readl(phba->HCregaddr, &creg_val)) {
spin_unlock_irq(&phba->hbalock);
return -EINVAL;
}
creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING);
writel(creg_val, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
}
phba->cfg_poll = val;
spin_unlock_irq(&phba->hbalock);
return strlen(buf);
}
/**
* lpfc_sriov_hw_max_virtfn_show - Return maximum number of virtual functions
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the formatted support level.
*
* Description:
* Returns the maximum number of virtual functions a physical function can
* support, 0 will be returned if called on virtual function.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_sriov_hw_max_virtfn_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
uint16_t max_nr_virtfn;
max_nr_virtfn = lpfc_sli_sriov_nr_virtfn_get(phba);
return scnprintf(buf, PAGE_SIZE, "%d\n", max_nr_virtfn);
}
/**
* lpfc_enable_bbcr_set: Sets an attribute value.
* @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Description:
* Validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
*
* Returns:
* zero on success
* -EINVAL if val is invalid
*/
static ssize_t
lpfc_enable_bbcr_set(struct lpfc_hba *phba, uint val)
{
if (lpfc_rangecheck(val, 0, 1) && phba->sli_rev == LPFC_SLI_REV4) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3068 lpfc_enable_bbcr changed from %d to "
"%d\n", phba->cfg_enable_bbcr, val);
phba->cfg_enable_bbcr = val;
return 0;
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0451 lpfc_enable_bbcr cannot set to %d, range is 0, "
"1\n", val);
return -EINVAL;
}
/*
* lpfc_param_show - Return a cfg attribute value in decimal
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
* into a function with the name lpfc_hba_queue_depth_show.
*
* lpfc_##attr##_show: Return the decimal value of an adapters cfg_xxx field.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the attribute value in decimal.
*
* Returns: size of formatted string.
**/
#define lpfc_param_show(attr) \
static ssize_t \
lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
struct Scsi_Host *shost = class_to_shost(dev);\
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
struct lpfc_hba *phba = vport->phba;\
return scnprintf(buf, PAGE_SIZE, "%d\n",\
phba->cfg_##attr);\
}
/*
* lpfc_param_hex_show - Return a cfg attribute value in hex
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
* into a function with the name lpfc_hba_queue_depth_show
*
* lpfc_##attr##_show: Return the hex value of an adapters cfg_xxx field.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the attribute value in hexadecimal.
*
* Returns: size of formatted string.
**/
#define lpfc_param_hex_show(attr) \
static ssize_t \
lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
struct Scsi_Host *shost = class_to_shost(dev);\
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
struct lpfc_hba *phba = vport->phba;\
uint val = 0;\
val = phba->cfg_##attr;\
return scnprintf(buf, PAGE_SIZE, "%#x\n",\
phba->cfg_##attr);\
}
/*
* lpfc_param_init - Initializes a cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
* into a function with the name lpfc_hba_queue_depth_init. The macro also
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: Initializes an attribute.
* @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Validates the min and max values then sets the adapter config field
* accordingly, or uses the default if out of range and prints an error message.
*
* Returns:
* zero on success
* -EINVAL if default used
**/
#define lpfc_param_init(attr, default, minval, maxval) \
static int \
lpfc_##attr##_init(struct lpfc_hba *phba, uint val) \
{ \
if (lpfc_rangecheck(val, minval, maxval)) {\
phba->cfg_##attr = val;\
return 0;\
}\
lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \
"0449 lpfc_"#attr" attribute cannot be set to %d, "\
"allowed range is ["#minval", "#maxval"]\n", val); \
phba->cfg_##attr = default;\
return -EINVAL;\
}
/*
* lpfc_param_set - Set a cfg attribute value
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: Sets an attribute value.
* @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Description:
* Validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
*
* Returns:
* zero on success
* -EINVAL if val is invalid
**/
#define lpfc_param_set(attr, default, minval, maxval) \
static int \
lpfc_##attr##_set(struct lpfc_hba *phba, uint val) \
{ \
if (lpfc_rangecheck(val, minval, maxval)) {\
lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \
"3052 lpfc_" #attr " changed from %d to %d\n", \
phba->cfg_##attr, val); \
phba->cfg_##attr = val;\
return 0;\
}\
lpfc_printf_log(phba, KERN_ERR, LOG_INIT, \
"0450 lpfc_"#attr" attribute cannot be set to %d, "\
"allowed range is ["#minval", "#maxval"]\n", val); \
return -EINVAL;\
}
/*
* lpfc_param_store - Set a vport attribute value
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
* into a function with the name lpfc_hba_queue_depth_store.
*
* lpfc_##attr##_store: Set an sttribute value.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: contains the attribute value in ascii.
* @count: not used.
*
* Description:
* Convert the ascii text number to an integer, then
* use the lpfc_##attr##_set function to set the value.
*
* Returns:
* -EINVAL if val is invalid or lpfc_##attr##_set() fails
* length of buffer upon success.
**/
#define lpfc_param_store(attr) \
static ssize_t \
lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
struct Scsi_Host *shost = class_to_shost(dev);\
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
struct lpfc_hba *phba = vport->phba;\
uint val = 0;\
if (!isdigit(buf[0]))\
return -EINVAL;\
if (sscanf(buf, "%i", &val) != 1)\
return -EINVAL;\
if (lpfc_##attr##_set(phba, val) == 0) \
return strlen(buf);\
else \
return -EINVAL;\
}
/*
* lpfc_vport_param_show - Return decimal formatted cfg attribute value
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
* into a function with the name lpfc_hba_queue_depth_show
*
* lpfc_##attr##_show: prints the attribute value in decimal.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the attribute value in decimal.
*
* Returns: length of formatted string.
**/
#define lpfc_vport_param_show(attr) \
static ssize_t \
lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
struct Scsi_Host *shost = class_to_shost(dev);\
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
return scnprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_##attr);\
}
/*
* lpfc_vport_param_hex_show - Return hex formatted attribute value
*
* Description:
* Macro that given an attr e.g.
* hba_queue_depth expands into a function with the name
* lpfc_hba_queue_depth_show
*
* lpfc_##attr##_show: prints the attribute value in hexadecimal.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the attribute value in hexadecimal.
*
* Returns: length of formatted string.
**/
#define lpfc_vport_param_hex_show(attr) \
static ssize_t \
lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
struct Scsi_Host *shost = class_to_shost(dev);\
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
return scnprintf(buf, PAGE_SIZE, "%#x\n", vport->cfg_##attr);\
}
/*
* lpfc_vport_param_init - Initialize a vport cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
* into a function with the name lpfc_hba_queue_depth_init. The macro also
* takes a default argument, a minimum and maximum argument.
*
* lpfc_##attr##_init: validates the min and max values then sets the
* adapter config field accordingly, or uses the default if out of range
* and prints an error message.
* @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
* zero on success
* -EINVAL if default used
**/
#define lpfc_vport_param_init(attr, default, minval, maxval) \
static int \
lpfc_##attr##_init(struct lpfc_vport *vport, uint val) \
{ \
if (lpfc_rangecheck(val, minval, maxval)) {\
vport->cfg_##attr = val;\
return 0;\
}\
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \
"0423 lpfc_"#attr" attribute cannot be set to %d, "\
"allowed range is ["#minval", "#maxval"]\n", val); \
vport->cfg_##attr = default;\
return -EINVAL;\
}
/*
* lpfc_vport_param_set - Set a vport cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
* into a function with the name lpfc_hba_queue_depth_set
*
* lpfc_##attr##_set: validates the min and max values then sets the
* adapter config field if in the valid range. prints error message
* and does not set the parameter if invalid.
* @phba: pointer to the adapter structure.
* @val: integer attribute value.
*
* Returns:
* zero on success
* -EINVAL if val is invalid
**/
#define lpfc_vport_param_set(attr, default, minval, maxval) \
static int \
lpfc_##attr##_set(struct lpfc_vport *vport, uint val) \
{ \
if (lpfc_rangecheck(val, minval, maxval)) {\
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \
"3053 lpfc_" #attr \
" changed from %d (x%x) to %d (x%x)\n", \
vport->cfg_##attr, vport->cfg_##attr, \
val, val); \
vport->cfg_##attr = val;\
return 0;\
}\
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, \
"0424 lpfc_"#attr" attribute cannot be set to %d, "\
"allowed range is ["#minval", "#maxval"]\n", val); \
return -EINVAL;\
}
/*
* lpfc_vport_param_store - Set a vport attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth
* expands into a function with the name lpfc_hba_queue_depth_store
*
* lpfc_##attr##_store: convert the ascii text number to an integer, then
* use the lpfc_##attr##_set function to set the value.
* @cdev: class device that is converted into a Scsi_host.
* @buf: contains the attribute value in decimal.
* @count: not used.
*
* Returns:
* -EINVAL if val is invalid or lpfc_##attr##_set() fails
* length of buffer upon success.
**/
#define lpfc_vport_param_store(attr) \
static ssize_t \
lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
struct Scsi_Host *shost = class_to_shost(dev);\
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;\
uint val = 0;\
if (!isdigit(buf[0]))\
return -EINVAL;\
if (sscanf(buf, "%i", &val) != 1)\
return -EINVAL;\
if (lpfc_##attr##_set(vport, val) == 0) \
return strlen(buf);\
else \
return -EINVAL;\
}
static DEVICE_ATTR(nvme_info, 0444, lpfc_nvme_info_show, NULL);
static DEVICE_ATTR(scsi_stat, 0444, lpfc_scsi_stat_show, NULL);
static DEVICE_ATTR(bg_info, S_IRUGO, lpfc_bg_info_show, NULL);
static DEVICE_ATTR(bg_guard_err, S_IRUGO, lpfc_bg_guard_err_show, NULL);
static DEVICE_ATTR(bg_apptag_err, S_IRUGO, lpfc_bg_apptag_err_show, NULL);
static DEVICE_ATTR(bg_reftag_err, S_IRUGO, lpfc_bg_reftag_err_show, NULL);
static DEVICE_ATTR(info, S_IRUGO, lpfc_info_show, NULL);
static DEVICE_ATTR(serialnum, S_IRUGO, lpfc_serialnum_show, NULL);
static DEVICE_ATTR(modeldesc, S_IRUGO, lpfc_modeldesc_show, NULL);
static DEVICE_ATTR(modelname, S_IRUGO, lpfc_modelname_show, NULL);
static DEVICE_ATTR(programtype, S_IRUGO, lpfc_programtype_show, NULL);
static DEVICE_ATTR(portnum, S_IRUGO, lpfc_vportnum_show, NULL);
static DEVICE_ATTR(fwrev, S_IRUGO, lpfc_fwrev_show, NULL);
static DEVICE_ATTR(hdw, S_IRUGO, lpfc_hdw_show, NULL);
static DEVICE_ATTR(link_state, S_IRUGO | S_IWUSR, lpfc_link_state_show,
lpfc_link_state_store);
static DEVICE_ATTR(option_rom_version, S_IRUGO,
lpfc_option_rom_version_show, NULL);
static DEVICE_ATTR(num_discovered_ports, S_IRUGO,
lpfc_num_discovered_ports_show, NULL);
static DEVICE_ATTR(nport_evt_cnt, S_IRUGO, lpfc_nport_evt_cnt_show, NULL);
static DEVICE_ATTR_RO(lpfc_drvr_version);
static DEVICE_ATTR_RO(lpfc_enable_fip);
static DEVICE_ATTR(board_mode, S_IRUGO | S_IWUSR,
lpfc_board_mode_show, lpfc_board_mode_store);
static DEVICE_ATTR_RO(lpfc_xcvr_data);
static DEVICE_ATTR(issue_reset, S_IWUSR, NULL, lpfc_issue_reset);
static DEVICE_ATTR(max_vpi, S_IRUGO, lpfc_max_vpi_show, NULL);
static DEVICE_ATTR(used_vpi, S_IRUGO, lpfc_used_vpi_show, NULL);
static DEVICE_ATTR(max_rpi, S_IRUGO, lpfc_max_rpi_show, NULL);
static DEVICE_ATTR(used_rpi, S_IRUGO, lpfc_used_rpi_show, NULL);
static DEVICE_ATTR(max_xri, S_IRUGO, lpfc_max_xri_show, NULL);
static DEVICE_ATTR(used_xri, S_IRUGO, lpfc_used_xri_show, NULL);
static DEVICE_ATTR(npiv_info, S_IRUGO, lpfc_npiv_info_show, NULL);
static DEVICE_ATTR_RO(lpfc_temp_sensor);
static DEVICE_ATTR_RO(lpfc_sriov_hw_max_virtfn);
static DEVICE_ATTR(protocol, S_IRUGO, lpfc_sli4_protocol_show, NULL);
static DEVICE_ATTR(lpfc_xlane_supported, S_IRUGO, lpfc_oas_supported_show,
NULL);
static DEVICE_ATTR(cmf_info, 0444, lpfc_cmf_info_show, NULL);
static DEVICE_ATTR_RO(lpfc_vmid_info);
#define WWN_SZ 8
/**
* lpfc_wwn_set - Convert string to the 8 byte WWN value.
* @buf: WWN string.
* @cnt: Length of string.
* @wwn: Array to receive converted wwn value.
*
* Returns:
* -EINVAL if the buffer does not contain a valid wwn
* 0 success
**/
static size_t
lpfc_wwn_set(const char *buf, size_t cnt, char wwn[])
{
unsigned int i, j;
/* Count may include a LF at end of string */
if (buf[cnt-1] == '\n')
cnt--;
if ((cnt < 16) || (cnt > 18) || ((cnt == 17) && (*buf++ != 'x')) ||
((cnt == 18) && ((*buf++ != '0') || (*buf++ != 'x'))))
return -EINVAL;
memset(wwn, 0, WWN_SZ);
/* Validate and store the new name */
for (i = 0, j = 0; i < 16; i++) {
if ((*buf >= 'a') && (*buf <= 'f'))
j = ((j << 4) | ((*buf++ - 'a') + 10));
else if ((*buf >= 'A') && (*buf <= 'F'))
j = ((j << 4) | ((*buf++ - 'A') + 10));
else if ((*buf >= '0') && (*buf <= '9'))
j = ((j << 4) | (*buf++ - '0'));
else
return -EINVAL;
if (i % 2) {
wwn[i/2] = j & 0xff;
j = 0;
}
}
return 0;
}
/**
* lpfc_oas_tgt_show - Return wwpn of target whose luns maybe enabled for
* Optimized Access Storage (OAS) operations.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: buffer for passing information.
*
* Returns:
* value of count
**/
static ssize_t
lpfc_oas_tgt_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
return scnprintf(buf, PAGE_SIZE, "0x%llx\n",
wwn_to_u64(phba->cfg_oas_tgt_wwpn));
}
/**
* lpfc_oas_tgt_store - Store wwpn of target whose luns maybe enabled for
* Optimized Access Storage (OAS) operations.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: buffer for passing information.
* @count: Size of the data buffer.
*
* Returns:
* -EINVAL count is invalid, invalid wwpn byte invalid
* -EPERM oas is not supported by hba
* value of count on success
**/
static ssize_t
lpfc_oas_tgt_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
unsigned int cnt = count;
uint8_t wwpn[WWN_SZ];
int rc;
if (!phba->cfg_fof)
return -EPERM;
/* count may include a LF at end of string */
if (buf[cnt-1] == '\n')
cnt--;
rc = lpfc_wwn_set(buf, cnt, wwpn);
if (rc)
return rc;
memcpy(phba->cfg_oas_tgt_wwpn, wwpn, (8 * sizeof(uint8_t)));
memcpy(phba->sli4_hba.oas_next_tgt_wwpn, wwpn, (8 * sizeof(uint8_t)));
if (wwn_to_u64(wwpn) == 0)
phba->cfg_oas_flags |= OAS_FIND_ANY_TARGET;
else
phba->cfg_oas_flags &= ~OAS_FIND_ANY_TARGET;
phba->cfg_oas_flags &= ~OAS_LUN_VALID;
phba->sli4_hba.oas_next_lun = FIND_FIRST_OAS_LUN;
return count;
}
static DEVICE_ATTR(lpfc_xlane_tgt, S_IRUGO | S_IWUSR,
lpfc_oas_tgt_show, lpfc_oas_tgt_store);
/**
* lpfc_oas_priority_show - Return wwpn of target whose luns maybe enabled for
* Optimized Access Storage (OAS) operations.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: buffer for passing information.
*
* Returns:
* value of count
**/
static ssize_t
lpfc_oas_priority_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
return scnprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_priority);
}
/**
* lpfc_oas_priority_store - Store wwpn of target whose luns maybe enabled for
* Optimized Access Storage (OAS) operations.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: buffer for passing information.
* @count: Size of the data buffer.
*
* Returns:
* -EINVAL count is invalid, invalid wwpn byte invalid
* -EPERM oas is not supported by hba
* value of count on success
**/
static ssize_t
lpfc_oas_priority_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
unsigned int cnt = count;
unsigned long val;
int ret;
if (!phba->cfg_fof)
return -EPERM;
/* count may include a LF at end of string */
if (buf[cnt-1] == '\n')
cnt--;
ret = kstrtoul(buf, 0, &val);
if (ret || (val > 0x7f))
return -EINVAL;
if (val)
phba->cfg_oas_priority = (uint8_t)val;
else
phba->cfg_oas_priority = phba->cfg_XLanePriority;
return count;
}
static DEVICE_ATTR(lpfc_xlane_priority, S_IRUGO | S_IWUSR,
lpfc_oas_priority_show, lpfc_oas_priority_store);
/**
* lpfc_oas_vpt_show - Return wwpn of vport whose targets maybe enabled
* for Optimized Access Storage (OAS) operations.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: buffer for passing information.
*
* Returns:
* value of count on success
**/
static ssize_t
lpfc_oas_vpt_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
return scnprintf(buf, PAGE_SIZE, "0x%llx\n",
wwn_to_u64(phba->cfg_oas_vpt_wwpn));
}
/**
* lpfc_oas_vpt_store - Store wwpn of vport whose targets maybe enabled
* for Optimized Access Storage (OAS) operations.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: buffer for passing information.
* @count: Size of the data buffer.
*
* Returns:
* -EINVAL count is invalid, invalid wwpn byte invalid
* -EPERM oas is not supported by hba
* value of count on success
**/
static ssize_t
lpfc_oas_vpt_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
unsigned int cnt = count;
uint8_t wwpn[WWN_SZ];
int rc;
if (!phba->cfg_fof)
return -EPERM;
/* count may include a LF at end of string */
if (buf[cnt-1] == '\n')
cnt--;
rc = lpfc_wwn_set(buf, cnt, wwpn);
if (rc)
return rc;
memcpy(phba->cfg_oas_vpt_wwpn, wwpn, (8 * sizeof(uint8_t)));
memcpy(phba->sli4_hba.oas_next_vpt_wwpn, wwpn, (8 * sizeof(uint8_t)));
if (wwn_to_u64(wwpn) == 0)
phba->cfg_oas_flags |= OAS_FIND_ANY_VPORT;
else
phba->cfg_oas_flags &= ~OAS_FIND_ANY_VPORT;
phba->cfg_oas_flags &= ~OAS_LUN_VALID;
if (phba->cfg_oas_priority == 0)
phba->cfg_oas_priority = phba->cfg_XLanePriority;
phba->sli4_hba.oas_next_lun = FIND_FIRST_OAS_LUN;
return count;
}
static DEVICE_ATTR(lpfc_xlane_vpt, S_IRUGO | S_IWUSR,
lpfc_oas_vpt_show, lpfc_oas_vpt_store);
/**
* lpfc_oas_lun_state_show - Return the current state (enabled or disabled)
* of whether luns will be enabled or disabled
* for Optimized Access Storage (OAS) operations.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: buffer for passing information.
*
* Returns:
* size of formatted string.
**/
static ssize_t
lpfc_oas_lun_state_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
return scnprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_lun_state);
}
/**
* lpfc_oas_lun_state_store - Store the state (enabled or disabled)
* of whether luns will be enabled or disabled
* for Optimized Access Storage (OAS) operations.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: buffer for passing information.
* @count: Size of the data buffer.
*
* Returns:
* -EINVAL count is invalid, invalid wwpn byte invalid
* -EPERM oas is not supported by hba
* value of count on success
**/
static ssize_t
lpfc_oas_lun_state_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
int val = 0;
if (!phba->cfg_fof)
return -EPERM;
if (!isdigit(buf[0]))
return -EINVAL;
if (sscanf(buf, "%i", &val) != 1)
return -EINVAL;
if ((val != 0) && (val != 1))
return -EINVAL;
phba->cfg_oas_lun_state = val;
return strlen(buf);
}
static DEVICE_ATTR(lpfc_xlane_lun_state, S_IRUGO | S_IWUSR,
lpfc_oas_lun_state_show, lpfc_oas_lun_state_store);
/**
* lpfc_oas_lun_status_show - Return the status of the Optimized Access
* Storage (OAS) lun returned by the
* lpfc_oas_lun_show function.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: buffer for passing information.
*
* Returns:
* size of formatted string.
**/
static ssize_t
lpfc_oas_lun_status_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
if (!(phba->cfg_oas_flags & OAS_LUN_VALID))
return -EFAULT;
return scnprintf(buf, PAGE_SIZE, "%d\n", phba->cfg_oas_lun_status);
}
static DEVICE_ATTR(lpfc_xlane_lun_status, S_IRUGO,
lpfc_oas_lun_status_show, NULL);
/**
* lpfc_oas_lun_state_set - enable or disable a lun for Optimized Access Storage
* (OAS) operations.
* @phba: lpfc_hba pointer.
* @vpt_wwpn: wwpn of the vport associated with the returned lun
* @tgt_wwpn: wwpn of the target associated with the returned lun
* @lun: the fc lun for setting oas state.
* @oas_state: the oas state to be set to the lun.
* @pri: priority
*
* Returns:
* SUCCESS : 0
* -EPERM OAS is not enabled or not supported by this port.
*
*/
static size_t
lpfc_oas_lun_state_set(struct lpfc_hba *phba, uint8_t vpt_wwpn[],
uint8_t tgt_wwpn[], uint64_t lun,
uint32_t oas_state, uint8_t pri)
{
int rc = 0;
if (!phba->cfg_fof)
return -EPERM;
if (oas_state) {
if (!lpfc_enable_oas_lun(phba, (struct lpfc_name *)vpt_wwpn,
(struct lpfc_name *)tgt_wwpn,
lun, pri))
rc = -ENOMEM;
} else {
lpfc_disable_oas_lun(phba, (struct lpfc_name *)vpt_wwpn,
(struct lpfc_name *)tgt_wwpn, lun, pri);
}
return rc;
}
/**
* lpfc_oas_lun_get_next - get the next lun that has been enabled for Optimized
* Access Storage (OAS) operations.
* @phba: lpfc_hba pointer.
* @vpt_wwpn: wwpn of the vport associated with the returned lun
* @tgt_wwpn: wwpn of the target associated with the returned lun
* @lun_status: status of the lun returned lun
* @lun_pri: priority of the lun returned lun
*
* Returns the first or next lun enabled for OAS operations for the vport/target
* specified. If a lun is found, its vport wwpn, target wwpn and status is
* returned. If the lun is not found, NOT_OAS_ENABLED_LUN is returned.
*
* Return:
* lun that is OAS enabled for the vport/target
* NOT_OAS_ENABLED_LUN when no oas enabled lun found.
*/
static uint64_t
lpfc_oas_lun_get_next(struct lpfc_hba *phba, uint8_t vpt_wwpn[],
uint8_t tgt_wwpn[], uint32_t *lun_status,
uint32_t *lun_pri)
{
uint64_t found_lun;
if (unlikely(!phba) || !vpt_wwpn || !tgt_wwpn)
return NOT_OAS_ENABLED_LUN;
if (lpfc_find_next_oas_lun(phba, (struct lpfc_name *)
phba->sli4_hba.oas_next_vpt_wwpn,
(struct lpfc_name *)
phba->sli4_hba.oas_next_tgt_wwpn,
&phba->sli4_hba.oas_next_lun,
(struct lpfc_name *)vpt_wwpn,
(struct lpfc_name *)tgt_wwpn,
&found_lun, lun_status, lun_pri))
return found_lun;
else
return NOT_OAS_ENABLED_LUN;
}
/**
* lpfc_oas_lun_state_change - enable/disable a lun for OAS operations
* @phba: lpfc_hba pointer.
* @vpt_wwpn: vport wwpn by reference.
* @tgt_wwpn: target wwpn by reference.
* @lun: the fc lun for setting oas state.
* @oas_state: the oas state to be set to the oas_lun.
* @pri: priority
*
* This routine enables (OAS_LUN_ENABLE) or disables (OAS_LUN_DISABLE)
* a lun for OAS operations.
*
* Return:
* SUCCESS: 0
* -ENOMEM: failed to enable an lun for OAS operations
* -EPERM: OAS is not enabled
*/
static ssize_t
lpfc_oas_lun_state_change(struct lpfc_hba *phba, uint8_t vpt_wwpn[],
uint8_t tgt_wwpn[], uint64_t lun,
uint32_t oas_state, uint8_t pri)
{
int rc;
rc = lpfc_oas_lun_state_set(phba, vpt_wwpn, tgt_wwpn, lun,
oas_state, pri);
return rc;
}
/**
* lpfc_oas_lun_show - Return oas enabled luns from a chosen target
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: buffer for passing information.
*
* This routine returns a lun enabled for OAS each time the function
* is called.
*
* Returns:
* SUCCESS: size of formatted string.
* -EFAULT: target or vport wwpn was not set properly.
* -EPERM: oas is not enabled.
**/
static ssize_t
lpfc_oas_lun_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
uint64_t oas_lun;
int len = 0;
if (!phba->cfg_fof)
return -EPERM;
if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0)
if (!(phba->cfg_oas_flags & OAS_FIND_ANY_VPORT))
return -EFAULT;
if (wwn_to_u64(phba->cfg_oas_tgt_wwpn) == 0)
if (!(phba->cfg_oas_flags & OAS_FIND_ANY_TARGET))
return -EFAULT;
oas_lun = lpfc_oas_lun_get_next(phba, phba->cfg_oas_vpt_wwpn,
phba->cfg_oas_tgt_wwpn,
&phba->cfg_oas_lun_status,
&phba->cfg_oas_priority);
if (oas_lun != NOT_OAS_ENABLED_LUN)
phba->cfg_oas_flags |= OAS_LUN_VALID;
len += scnprintf(buf + len, PAGE_SIZE-len, "0x%llx", oas_lun);
return len;
}
/**
* lpfc_oas_lun_store - Sets the OAS state for lun
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: buffer for passing information.
* @count: size of the formatting string
*
* This function sets the OAS state for lun. Before this function is called,
* the vport wwpn, target wwpn, and oas state need to be set.
*
* Returns:
* SUCCESS: size of formatted string.
* -EFAULT: target or vport wwpn was not set properly.
* -EPERM: oas is not enabled.
* size of formatted string.
**/
static ssize_t
lpfc_oas_lun_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
uint64_t scsi_lun;
uint32_t pri;
ssize_t rc;
if (!phba->cfg_fof)
return -EPERM;
if (wwn_to_u64(phba->cfg_oas_vpt_wwpn) == 0)
return -EFAULT;
if (wwn_to_u64(phba->cfg_oas_tgt_wwpn) == 0)
return -EFAULT;
if (!isdigit(buf[0]))
return -EINVAL;
if (sscanf(buf, "0x%llx", &scsi_lun) != 1)
return -EINVAL;
pri = phba->cfg_oas_priority;
if (pri == 0)
pri = phba->cfg_XLanePriority;
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"3372 Try to set vport 0x%llx target 0x%llx lun:0x%llx "
"priority 0x%x with oas state %d\n",
wwn_to_u64(phba->cfg_oas_vpt_wwpn),
wwn_to_u64(phba->cfg_oas_tgt_wwpn), scsi_lun,
pri, phba->cfg_oas_lun_state);
rc = lpfc_oas_lun_state_change(phba, phba->cfg_oas_vpt_wwpn,
phba->cfg_oas_tgt_wwpn, scsi_lun,
phba->cfg_oas_lun_state, pri);
if (rc)
return rc;
return count;
}
static DEVICE_ATTR(lpfc_xlane_lun, S_IRUGO | S_IWUSR,
lpfc_oas_lun_show, lpfc_oas_lun_store);
int lpfc_enable_nvmet_cnt;
unsigned long long lpfc_enable_nvmet[LPFC_NVMET_MAX_PORTS] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
module_param_array(lpfc_enable_nvmet, ullong, &lpfc_enable_nvmet_cnt, 0444);
MODULE_PARM_DESC(lpfc_enable_nvmet, "Enable HBA port(s) WWPN as a NVME Target");
static int lpfc_poll = 0;
module_param(lpfc_poll, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_poll, "FCP ring polling mode control:"
" 0 - none,"
" 1 - poll with interrupts enabled"
" 3 - poll and disable FCP ring interrupts");
static DEVICE_ATTR_RW(lpfc_poll);
int lpfc_no_hba_reset_cnt;
unsigned long lpfc_no_hba_reset[MAX_HBAS_NO_RESET] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
module_param_array(lpfc_no_hba_reset, ulong, &lpfc_no_hba_reset_cnt, 0444);
MODULE_PARM_DESC(lpfc_no_hba_reset, "WWPN of HBAs that should not be reset");
LPFC_ATTR(sli_mode, 3, 3, 3,
"SLI mode selector: 3 - select SLI-3");
LPFC_ATTR_R(enable_npiv, 1, 0, 1,
"Enable NPIV functionality");
LPFC_ATTR_R(fcf_failover_policy, 1, 1, 2,
"FCF Fast failover=1 Priority failover=2");
/*
* lpfc_fcp_wait_abts_rsp: Modifies criteria for reporting completion of
* aborted IO.
* The range is [0,1]. Default value is 0
* 0, IO completes after ABTS issued (default).
* 1, IO completes after receipt of ABTS response or timeout.
*/
LPFC_ATTR_R(fcp_wait_abts_rsp, 0, 0, 1, "Wait for FCP ABTS completion");
/*
# lpfc_enable_rrq: Track XRI/OXID reuse after IO failures
# 0x0 = disabled, XRI/OXID use not tracked.
# 0x1 = XRI/OXID reuse is timed with ratov, RRQ sent.
# 0x2 = XRI/OXID reuse is timed with ratov, No RRQ sent.
*/
LPFC_ATTR_R(enable_rrq, 2, 0, 2,
"Enable RRQ functionality");
/*
# lpfc_suppress_link_up: Bring link up at initialization
# 0x0 = bring link up (issue MBX_INIT_LINK)
# 0x1 = do NOT bring link up at initialization(MBX_INIT_LINK)
# 0x2 = never bring up link
# Default value is 0.
*/
LPFC_ATTR_R(suppress_link_up, LPFC_INITIALIZE_LINK, LPFC_INITIALIZE_LINK,
LPFC_DELAY_INIT_LINK_INDEFINITELY,
"Suppress Link Up at initialization");
static ssize_t
lpfc_pls_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
return scnprintf(buf, PAGE_SIZE, "%d\n",
phba->sli4_hba.pc_sli4_params.pls);
}
static DEVICE_ATTR(pls, 0444,
lpfc_pls_show, NULL);
static ssize_t
lpfc_pt_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
return scnprintf(buf, PAGE_SIZE, "%d\n",
test_bit(HBA_PERSISTENT_TOPO,
&phba->hba_flag) ? 1 : 0);
}
static DEVICE_ATTR(pt, 0444,
lpfc_pt_show, NULL);
/*
# lpfc_cnt: Number of IOCBs allocated for ELS, CT, and ABTS
# 1 - (1024)
# 2 - (2048)
# 3 - (3072)
# 4 - (4096)
# 5 - (5120)
*/
static ssize_t
lpfc_iocb_hw_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *) shost->hostdata)->phba;
return scnprintf(buf, PAGE_SIZE, "%d\n", phba->iocb_max);
}
static DEVICE_ATTR(iocb_hw, S_IRUGO,
lpfc_iocb_hw_show, NULL);
static ssize_t
lpfc_txq_hw_show(struct device *dev, struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *) shost->hostdata)->phba;
struct lpfc_sli_ring *pring = lpfc_phba_elsring(phba);
return scnprintf(buf, PAGE_SIZE, "%d\n",
pring ? pring->txq_max : 0);
}
static DEVICE_ATTR(txq_hw, S_IRUGO,
lpfc_txq_hw_show, NULL);
static ssize_t
lpfc_txcmplq_hw_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_hba *phba = ((struct lpfc_vport *) shost->hostdata)->phba;
struct lpfc_sli_ring *pring = lpfc_phba_elsring(phba);
return scnprintf(buf, PAGE_SIZE, "%d\n",
pring ? pring->txcmplq_max : 0);
}
static DEVICE_ATTR(txcmplq_hw, S_IRUGO,
lpfc_txcmplq_hw_show, NULL);
/*
# lpfc_nodev_tmo: If set, it will hold all I/O errors on devices that disappear
# until the timer expires. Value range is [0,255]. Default value is 30.
*/
static int lpfc_nodev_tmo = LPFC_DEF_DEVLOSS_TMO;
static int lpfc_devloss_tmo = LPFC_DEF_DEVLOSS_TMO;
module_param(lpfc_nodev_tmo, int, 0);
MODULE_PARM_DESC(lpfc_nodev_tmo,
"Seconds driver will hold I/O waiting "
"for a device to come back");
/**
* lpfc_nodev_tmo_show - Return the hba dev loss timeout value
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the dev loss timeout in decimal.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_nodev_tmo_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
return scnprintf(buf, PAGE_SIZE, "%d\n", vport->cfg_devloss_tmo);
}
/**
* lpfc_nodev_tmo_init - Set the hba nodev timeout value
* @vport: lpfc vport structure pointer.
* @val: contains the nodev timeout value.
*
* Description:
* If the devloss tmo is already set then nodev tmo is set to devloss tmo,
* a kernel error message is printed and zero is returned.
* Else if val is in range then nodev tmo and devloss tmo are set to val.
* Otherwise nodev tmo is set to the default value.
*
* Returns:
* zero if already set or if val is in range
* -EINVAL val out of range
**/
static int
lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val)
{
if (vport->cfg_devloss_tmo != LPFC_DEF_DEVLOSS_TMO) {
vport->cfg_nodev_tmo = vport->cfg_devloss_tmo;
if (val != LPFC_DEF_DEVLOSS_TMO)
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"0407 Ignoring lpfc_nodev_tmo module "
"parameter because lpfc_devloss_tmo "
"is set.\n");
return 0;
}
if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) {
vport->cfg_nodev_tmo = val;
vport->cfg_devloss_tmo = val;
return 0;
}
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"0400 lpfc_nodev_tmo attribute cannot be set to"
" %d, allowed range is [%d, %d]\n",
val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO);
vport->cfg_nodev_tmo = LPFC_DEF_DEVLOSS_TMO;
return -EINVAL;
}
/**
* lpfc_update_rport_devloss_tmo - Update dev loss tmo value
* @vport: lpfc vport structure pointer.
*
* Description:
* Update all the ndlp's dev loss tmo with the vport devloss tmo value.
**/
static void
lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport)
{
struct lpfc_nodelist *ndlp;
unsigned long iflags;
#if (IS_ENABLED(CONFIG_NVME_FC))
struct lpfc_nvme_rport *rport;
struct nvme_fc_remote_port *remoteport = NULL;
#endif
spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags);
list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
if (ndlp->rport)
ndlp->rport->dev_loss_tmo = vport->cfg_devloss_tmo;
#if (IS_ENABLED(CONFIG_NVME_FC))
spin_lock(&ndlp->lock);
rport = lpfc_ndlp_get_nrport(ndlp);
if (rport)
remoteport = rport->remoteport;
spin_unlock(&ndlp->lock);
if (rport && remoteport)
nvme_fc_set_remoteport_devloss(remoteport,
vport->cfg_devloss_tmo);
#endif
}
spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags);
}
/**
* lpfc_nodev_tmo_set - Set the vport nodev tmo and devloss tmo values
* @vport: lpfc vport structure pointer.
* @val: contains the tmo value.
*
* Description:
* If the devloss tmo is already set or the vport dev loss tmo has changed
* then a kernel error message is printed and zero is returned.
* Else if val is in range then nodev tmo and devloss tmo are set to val.
* Otherwise nodev tmo is set to the default value.
*
* Returns:
* zero if already set or if val is in range
* -EINVAL val out of range
**/
static int
lpfc_nodev_tmo_set(struct lpfc_vport *vport, int val)
{
if (vport->dev_loss_tmo_changed ||
(lpfc_devloss_tmo != LPFC_DEF_DEVLOSS_TMO)) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"0401 Ignoring change to lpfc_nodev_tmo "
"because lpfc_devloss_tmo is set.\n");
return 0;
}
if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) {
vport->cfg_nodev_tmo = val;
vport->cfg_devloss_tmo = val;
/*
* For compat: set the fc_host dev loss so new rports
* will get the value.
*/
fc_host_dev_loss_tmo(lpfc_shost_from_vport(vport)) = val;
lpfc_update_rport_devloss_tmo(vport);
return 0;
}
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"0403 lpfc_nodev_tmo attribute cannot be set to "
"%d, allowed range is [%d, %d]\n",
val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO);
return -EINVAL;
}
lpfc_vport_param_store(nodev_tmo)
static DEVICE_ATTR_RW(lpfc_nodev_tmo);
/*
# lpfc_devloss_tmo: If set, it will hold all I/O errors on devices that
# disappear until the timer expires. Value range is [0,255]. Default
# value is 30.
*/
module_param(lpfc_devloss_tmo, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_devloss_tmo,
"Seconds driver will hold I/O waiting "
"for a device to come back");
lpfc_vport_param_init(devloss_tmo, LPFC_DEF_DEVLOSS_TMO,
LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO)
lpfc_vport_param_show(devloss_tmo)
/**
* lpfc_devloss_tmo_set - Sets vport nodev tmo, devloss tmo values, changed bit
* @vport: lpfc vport structure pointer.
* @val: contains the tmo value.
*
* Description:
* If val is in a valid range then set the vport nodev tmo,
* devloss tmo, also set the vport dev loss tmo changed flag.
* Else a kernel error message is printed.
*
* Returns:
* zero if val is in range
* -EINVAL val out of range
**/
static int
lpfc_devloss_tmo_set(struct lpfc_vport *vport, int val)
{
if (val >= LPFC_MIN_DEVLOSS_TMO && val <= LPFC_MAX_DEVLOSS_TMO) {
vport->cfg_nodev_tmo = val;
vport->cfg_devloss_tmo = val;
vport->dev_loss_tmo_changed = 1;
fc_host_dev_loss_tmo(lpfc_shost_from_vport(vport)) = val;
lpfc_update_rport_devloss_tmo(vport);
return 0;
}
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"0404 lpfc_devloss_tmo attribute cannot be set to "
"%d, allowed range is [%d, %d]\n",
val, LPFC_MIN_DEVLOSS_TMO, LPFC_MAX_DEVLOSS_TMO);
return -EINVAL;
}
lpfc_vport_param_store(devloss_tmo)
static DEVICE_ATTR_RW(lpfc_devloss_tmo);
/*
* lpfc_suppress_rsp: Enable suppress rsp feature is firmware supports it
* lpfc_suppress_rsp = 0 Disable
* lpfc_suppress_rsp = 1 Enable (default)
*
*/
LPFC_ATTR_R(suppress_rsp, 1, 0, 1,
"Enable suppress rsp feature is firmware supports it");
/*
* lpfc_nvmet_mrq: Specify number of RQ pairs for processing NVMET cmds
* lpfc_nvmet_mrq = 0 driver will calcualte optimal number of RQ pairs
* lpfc_nvmet_mrq = 1 use a single RQ pair
* lpfc_nvmet_mrq >= 2 use specified RQ pairs for MRQ
*
*/
LPFC_ATTR_R(nvmet_mrq,
LPFC_NVMET_MRQ_AUTO, LPFC_NVMET_MRQ_AUTO, LPFC_NVMET_MRQ_MAX,
"Specify number of RQ pairs for processing NVMET cmds");
/*
* lpfc_nvmet_mrq_post: Specify number of RQ buffer to initially post
* to each NVMET RQ. Range 64 to 2048, default is 512.
*/
LPFC_ATTR_R(nvmet_mrq_post,
LPFC_NVMET_RQE_DEF_POST, LPFC_NVMET_RQE_MIN_POST,
LPFC_NVMET_RQE_DEF_COUNT,
"Specify number of RQ buffers to initially post");
/*
* lpfc_enable_fc4_type: Defines what FC4 types are supported.
* Supported Values: 1 - register just FCP
* 3 - register both FCP and NVME
* Supported values are [1,3]. Default value is 3
*/
LPFC_ATTR_R(enable_fc4_type, LPFC_DEF_ENBL_FC4_TYPE,
LPFC_ENABLE_FCP, LPFC_MAX_ENBL_FC4_TYPE,
"Enable FC4 Protocol support - FCP / NVME");
/*
# lpfc_log_verbose: Only turn this flag on if you are willing to risk being
# deluged with LOTS of information.
# You can set a bit mask to record specific types of verbose messages:
# See lpfc_logmsh.h for definitions.
*/
LPFC_VPORT_ATTR_HEX_RW(log_verbose, 0x0, 0x0, 0xffffffff,
"Verbose logging bit-mask");
/*
# lpfc_enable_da_id: This turns on the DA_ID CT command that deregisters
# objects that have been registered with the nameserver after login.
*/
LPFC_VPORT_ATTR_R(enable_da_id, 1, 0, 1,
"Deregister nameserver objects before LOGO");
/*
# lun_queue_depth: This parameter is used to limit the number of outstanding
# commands per FCP LUN.
*/
LPFC_VPORT_ATTR_R(lun_queue_depth, 64, 1, 512,
"Max number of FCP commands we can queue to a specific LUN");
/*
# tgt_queue_depth: This parameter is used to limit the number of outstanding
# commands per target port. Value range is [10,65535]. Default value is 65535.
*/
static uint lpfc_tgt_queue_depth = LPFC_MAX_TGT_QDEPTH;
module_param(lpfc_tgt_queue_depth, uint, 0444);
MODULE_PARM_DESC(lpfc_tgt_queue_depth, "Set max Target queue depth");
lpfc_vport_param_show(tgt_queue_depth);
lpfc_vport_param_init(tgt_queue_depth, LPFC_MAX_TGT_QDEPTH,
LPFC_MIN_TGT_QDEPTH, LPFC_MAX_TGT_QDEPTH);
/**
* lpfc_tgt_queue_depth_set: Sets an attribute value.
* @vport: lpfc vport structure pointer.
* @val: integer attribute value.
*
* Description: Sets the parameter to the new value.
*
* Returns:
* zero on success
* -EINVAL if val is invalid
*/
static int
lpfc_tgt_queue_depth_set(struct lpfc_vport *vport, uint val)
{
struct lpfc_nodelist *ndlp;
unsigned long iflags;
if (!lpfc_rangecheck(val, LPFC_MIN_TGT_QDEPTH, LPFC_MAX_TGT_QDEPTH))
return -EINVAL;
if (val == vport->cfg_tgt_queue_depth)
return 0;
vport->cfg_tgt_queue_depth = val;
/* Next loop thru nodelist and change cmd_qdepth */
spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags);
list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp)
ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth;
spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags);
return 0;
}
lpfc_vport_param_store(tgt_queue_depth);
static DEVICE_ATTR_RW(lpfc_tgt_queue_depth);
/*
# hba_queue_depth: This parameter is used to limit the number of outstanding
# commands per lpfc HBA. Value range is [32,8192]. If this parameter
# value is greater than the maximum number of exchanges supported by the HBA,
# then maximum number of exchanges supported by the HBA is used to determine
# the hba_queue_depth.
*/
LPFC_ATTR_R(hba_queue_depth, 8192, 32, 8192,
"Max number of FCP commands we can queue to a lpfc HBA");
/*
# peer_port_login: This parameter allows/prevents logins
# between peer ports hosted on the same physical port.
# When this parameter is set 0 peer ports of same physical port
# are not allowed to login to each other.
# When this parameter is set 1 peer ports of same physical port
# are allowed to login to each other.
# Default value of this parameter is 0.
*/
LPFC_VPORT_ATTR_R(peer_port_login, 0, 0, 1,
"Allow peer ports on the same physical port to login to each "
"other.");
/*
# restrict_login: This parameter allows/prevents logins
# between Virtual Ports and remote initiators.
# When this parameter is not set (0) Virtual Ports will accept PLOGIs from
# other initiators and will attempt to PLOGI all remote ports.
# When this parameter is set (1) Virtual Ports will reject PLOGIs from
# remote ports and will not attempt to PLOGI to other initiators.
# This parameter does not restrict to the physical port.
# This parameter does not restrict logins to Fabric resident remote ports.
# Default value of this parameter is 1.
*/
static int lpfc_restrict_login = 1;
module_param(lpfc_restrict_login, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_restrict_login,
"Restrict virtual ports login to remote initiators.");
lpfc_vport_param_show(restrict_login);
/**
* lpfc_restrict_login_init - Set the vport restrict login flag
* @vport: lpfc vport structure pointer.
* @val: contains the restrict login value.
*
* Description:
* If val is not in a valid range then log a kernel error message and set
* the vport restrict login to one.
* If the port type is physical clear the restrict login flag and return.
* Else set the restrict login flag to val.
*
* Returns:
* zero if val is in range
* -EINVAL val out of range
**/
static int
lpfc_restrict_login_init(struct lpfc_vport *vport, int val)
{
if (val < 0 || val > 1) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"0422 lpfc_restrict_login attribute cannot "
"be set to %d, allowed range is [0, 1]\n",
val);
vport->cfg_restrict_login = 1;
return -EINVAL;
}
if (vport->port_type == LPFC_PHYSICAL_PORT) {
vport->cfg_restrict_login = 0;
return 0;
}
vport->cfg_restrict_login = val;
return 0;
}
/**
* lpfc_restrict_login_set - Set the vport restrict login flag
* @vport: lpfc vport structure pointer.
* @val: contains the restrict login value.
*
* Description:
* If val is not in a valid range then log a kernel error message and set
* the vport restrict login to one.
* If the port type is physical and the val is not zero log a kernel
* error message, clear the restrict login flag and return zero.
* Else set the restrict login flag to val.
*
* Returns:
* zero if val is in range
* -EINVAL val out of range
**/
static int
lpfc_restrict_login_set(struct lpfc_vport *vport, int val)
{
if (val < 0 || val > 1) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"0425 lpfc_restrict_login attribute cannot "
"be set to %d, allowed range is [0, 1]\n",
val);
vport->cfg_restrict_login = 1;
return -EINVAL;
}
if (vport->port_type == LPFC_PHYSICAL_PORT && val != 0) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"0468 lpfc_restrict_login must be 0 for "
"Physical ports.\n");
vport->cfg_restrict_login = 0;
return 0;
}
vport->cfg_restrict_login = val;
return 0;
}
lpfc_vport_param_store(restrict_login);
static DEVICE_ATTR_RW(lpfc_restrict_login);
/*
# Some disk devices have a "select ID" or "select Target" capability.
# From a protocol standpoint "select ID" usually means select the
# Fibre channel "ALPA". In the FC-AL Profile there is an "informative
# annex" which contains a table that maps a "select ID" (a number
# between 0 and 7F) to an ALPA. By default, for compatibility with
# older drivers, the lpfc driver scans this table from low ALPA to high
# ALPA.
#
# Turning on the scan-down variable (on = 1, off = 0) will
# cause the lpfc driver to use an inverted table, effectively
# scanning ALPAs from high to low. Value range is [0,1]. Default value is 1.
#
# (Note: This "select ID" functionality is a LOOP ONLY characteristic
# and will not work across a fabric. Also this parameter will take
# effect only in the case when ALPA map is not available.)
*/
LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1,
"Start scanning for devices from highest ALPA to lowest");
/*
# lpfc_topology: link topology for init link
# 0x0 = attempt loop mode then point-to-point
# 0x01 = internal loopback mode
# 0x02 = attempt point-to-point mode only
# 0x04 = attempt loop mode only
# 0x06 = attempt point-to-point mode then loop
# Set point-to-point mode if you want to run as an N_Port.
# Set loop mode if you want to run as an NL_Port. Value range is [0,0x6].
# Default value is 0.
*/
LPFC_ATTR(topology, 0, 0, 6,
"Select Fibre Channel topology");
/**
* lpfc_topology_store - Set the adapters topology field
* @dev: class device that is converted into a scsi_host.
* @attr:device attribute, not used.
* @buf: buffer for passing information.
* @count: size of the data buffer.
*
* Description:
* If val is in a valid range then set the adapter's topology field and
* issue a lip; if the lip fails reset the topology to the old value.
*
* If the value is not in range log a kernel error message and return an error.
*
* Returns:
* zero if val is in range and lip okay
* non-zero return value from lpfc_issue_lip()
* -EINVAL val out of range
**/
static ssize_t
lpfc_topology_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
int val = 0;
int nolip = 0;
const char *val_buf = buf;
int err;
uint32_t prev_val;
u8 sli_family, if_type;
if (!strncmp(buf, "nolip ", strlen("nolip "))) {
nolip = 1;
val_buf = &buf[strlen("nolip ")];
}
if (!isdigit(val_buf[0]))
return -EINVAL;
if (sscanf(val_buf, "%i", &val) != 1)
return -EINVAL;
if (val >= 0 && val <= 6) {
prev_val = phba->cfg_topology;
if (phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G &&
val == 4) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"3113 Loop mode not supported at speed %d\n",
val);
return -EINVAL;
}
/*
* The 'topology' is not a configurable parameter if :
* - persistent topology enabled
* - ASIC_GEN_NUM >= 0xC, with no private loop support
*/
sli_family = bf_get(lpfc_sli_intf_sli_family,
&phba->sli4_hba.sli_intf);
if_type = bf_get(lpfc_sli_intf_if_type,
&phba->sli4_hba.sli_intf);
if ((test_bit(HBA_PERSISTENT_TOPO, &phba->hba_flag) ||
(!phba->sli4_hba.pc_sli4_params.pls &&
(sli_family == LPFC_SLI_INTF_FAMILY_G6 ||
if_type == LPFC_SLI_INTF_IF_TYPE_6))) &&
val == 4) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"3114 Loop mode not supported\n");
return -EINVAL;
}
phba->cfg_topology = val;
if (nolip)
return strlen(buf);
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"3054 lpfc_topology changed from %d to %d\n",
prev_val, val);
if (prev_val != val && phba->sli_rev == LPFC_SLI_REV4)
phba->fc_topology_changed = 1;
err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
if (err) {
phba->cfg_topology = prev_val;
return -EINVAL;
} else
return strlen(buf);
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"%d:0467 lpfc_topology attribute cannot be set to %d, "
"allowed range is [0, 6]\n",
phba->brd_no, val);
return -EINVAL;
}
lpfc_param_show(topology)
static DEVICE_ATTR_RW(lpfc_topology);
/**
* lpfc_static_vport_show: Read callback function for
* lpfc_static_vport sysfs file.
* @dev: Pointer to class device object.
* @attr: device attribute structure.
* @buf: Data buffer.
*
* This function is the read call back function for
* lpfc_static_vport sysfs file. The lpfc_static_vport
* sysfs file report the mageability of the vport.
**/
static ssize_t
lpfc_static_vport_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
if (vport->vport_flag & STATIC_VPORT)
sprintf(buf, "1\n");
else
sprintf(buf, "0\n");
return strlen(buf);
}
/*
* Sysfs attribute to control the statistical data collection.
*/
static DEVICE_ATTR_RO(lpfc_static_vport);
/*
# lpfc_link_speed: Link speed selection for initializing the Fibre Channel
# connection.
# Value range is [0,128]. Default value is 0.
*/
/**
* lpfc_link_speed_store - Set the adapters link speed
* @dev: Pointer to class device.
* @attr: Unused.
* @buf: Data buffer.
* @count: Size of the data buffer.
*
* Description:
* If val is in a valid range then set the adapter's link speed field and
* issue a lip; if the lip fails reset the link speed to the old value.
*
* Notes:
* If the value is not in range log a kernel error message and return an error.
*
* Returns:
* zero if val is in range and lip okay.
* non-zero return value from lpfc_issue_lip()
* -EINVAL val out of range
**/
static ssize_t
lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
int val = LPFC_USER_LINK_SPEED_AUTO;
int nolip = 0;
const char *val_buf = buf;
int err;
uint32_t prev_val, if_type;
if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
if (if_type >= LPFC_SLI_INTF_IF_TYPE_2 &&
test_bit(HBA_FORCED_LINK_SPEED, &phba->hba_flag))
return -EPERM;
if (!strncmp(buf, "nolip ", strlen("nolip "))) {
nolip = 1;
val_buf = &buf[strlen("nolip ")];
}
if (!isdigit(val_buf[0]))
return -EINVAL;
if (sscanf(val_buf, "%i", &val) != 1)
return -EINVAL;
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"3055 lpfc_link_speed changed from %d to %d %s\n",
phba->cfg_link_speed, val, nolip ? "(nolip)" : "(lip)");
if ((val == LPFC_USER_LINK_SPEED_1G && !(phba->lmt & LMT_1Gb)) ||
(val == LPFC_USER_LINK_SPEED_2G && !(phba->lmt & LMT_2Gb)) ||
(val == LPFC_USER_LINK_SPEED_4G && !(phba->lmt & LMT_4Gb)) ||
(val == LPFC_USER_LINK_SPEED_8G && !(phba->lmt & LMT_8Gb)) ||
(val == LPFC_USER_LINK_SPEED_10G && !(phba->lmt & LMT_10Gb)) ||
(val == LPFC_USER_LINK_SPEED_16G && !(phba->lmt & LMT_16Gb)) ||
(val == LPFC_USER_LINK_SPEED_32G && !(phba->lmt & LMT_32Gb)) ||
(val == LPFC_USER_LINK_SPEED_64G && !(phba->lmt & LMT_64Gb)) ||
(val == LPFC_USER_LINK_SPEED_128G && !(phba->lmt & LMT_128Gb))) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2879 lpfc_link_speed attribute cannot be set "
"to %d. Speed is not supported by this port.\n",
val);
return -EINVAL;
}
if (val >= LPFC_USER_LINK_SPEED_16G &&
phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3112 lpfc_link_speed attribute cannot be set "
"to %d. Speed is not supported in loop mode.\n",
val);
return -EINVAL;
}
switch (val) {
case LPFC_USER_LINK_SPEED_AUTO:
case LPFC_USER_LINK_SPEED_1G:
case LPFC_USER_LINK_SPEED_2G:
case LPFC_USER_LINK_SPEED_4G:
case LPFC_USER_LINK_SPEED_8G:
case LPFC_USER_LINK_SPEED_16G:
case LPFC_USER_LINK_SPEED_32G:
case LPFC_USER_LINK_SPEED_64G:
case LPFC_USER_LINK_SPEED_128G:
prev_val = phba->cfg_link_speed;
phba->cfg_link_speed = val;
if (nolip)
return strlen(buf);
err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
if (err) {
phba->cfg_link_speed = prev_val;
return -EINVAL;
}
return strlen(buf);
default:
break;
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0469 lpfc_link_speed attribute cannot be set to %d, "
"allowed values are [%s]\n",
val, LPFC_LINK_SPEED_STRING);
return -EINVAL;
}
static int lpfc_link_speed = 0;
module_param(lpfc_link_speed, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_link_speed, "Select link speed");
lpfc_param_show(link_speed)
/**
* lpfc_link_speed_init - Set the adapters link speed
* @phba: lpfc_hba pointer.
* @val: link speed value.
*
* Description:
* If val is in a valid range then set the adapter's link speed field.
*
* Notes:
* If the value is not in range log a kernel error message, clear the link
* speed and return an error.
*
* Returns:
* zero if val saved.
* -EINVAL val out of range
**/
static int
lpfc_link_speed_init(struct lpfc_hba *phba, int val)
{
if (val >= LPFC_USER_LINK_SPEED_16G && phba->cfg_topology == 4) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3111 lpfc_link_speed of %d cannot "
"support loop mode, setting topology to default.\n",
val);
phba->cfg_topology = 0;
}
switch (val) {
case LPFC_USER_LINK_SPEED_AUTO:
case LPFC_USER_LINK_SPEED_1G:
case LPFC_USER_LINK_SPEED_2G:
case LPFC_USER_LINK_SPEED_4G:
case LPFC_USER_LINK_SPEED_8G:
case LPFC_USER_LINK_SPEED_16G:
case LPFC_USER_LINK_SPEED_32G:
case LPFC_USER_LINK_SPEED_64G:
case LPFC_USER_LINK_SPEED_128G:
phba->cfg_link_speed = val;
return 0;
default:
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0405 lpfc_link_speed attribute cannot "
"be set to %d, allowed values are "
"["LPFC_LINK_SPEED_STRING"]\n", val);
phba->cfg_link_speed = LPFC_USER_LINK_SPEED_AUTO;
return -EINVAL;
}
}
static DEVICE_ATTR_RW(lpfc_link_speed);
/*
# lpfc_aer_support: Support PCIe device Advanced Error Reporting (AER)
# 1 = aer supported and enabled (default)
# PCIe error reporting is always enabled by the PCI core, so this always
# shows 1.
#
# N.B. Parts of LPFC_ATTR open-coded since some of the underlying
# infrastructure (phba->cfg_aer_support) is gone.
*/
static uint lpfc_aer_support = 1;
module_param(lpfc_aer_support, uint, S_IRUGO);
MODULE_PARM_DESC(lpfc_aer_support, "Enable PCIe device AER support");
static ssize_t
lpfc_aer_support_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", lpfc_aer_support);
}
/**
* lpfc_aer_support_store - Set the adapter for aer support
*
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing enable or disable aer flag.
* @count: unused variable.
*
* Description:
* PCIe error reporting is enabled by the PCI core, so drivers don't need
* to do anything. Retain this interface for backwards compatibility,
* but do nothing.
*
* Returns:
* length of the buf on success
* -EINVAL if val out of range
**/
static ssize_t
lpfc_aer_support_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int val = 0;
if (!isdigit(buf[0]))
return -EINVAL;
if (sscanf(buf, "%i", &val) != 1)
return -EINVAL;
dev_info_once(dev, "PCIe error reporting automatically enabled by the PCI core; sysfs write ignored\n");
return strlen(buf);
}
static DEVICE_ATTR_RW(lpfc_aer_support);
/**
* lpfc_aer_cleanup_state - Clean up aer state to the aer enabled device
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing flag 1 for aer cleanup state.
* @count: unused variable.
*
* Description:
* If the @buf contains 1, invokes the kernel AER helper routine
* pci_aer_clear_nonfatal_status() to clean up the uncorrectable
* error status register.
*
* Notes:
*
* Returns:
* -EINVAL if the buf does not contain 1
* -EPERM if the OS cannot clear AER error status, i.e., when platform
* firmware owns the AER Capability
**/
static ssize_t
lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
int val, rc = -1;
if (!isdigit(buf[0]))
return -EINVAL;
if (sscanf(buf, "%i", &val) != 1)
return -EINVAL;
if (val != 1)
return -EINVAL;
rc = pci_aer_clear_nonfatal_status(phba->pcidev);
if (rc == 0)
return strlen(buf);
else
return -EPERM;
}
static DEVICE_ATTR(lpfc_aer_state_cleanup, S_IWUSR, NULL,
lpfc_aer_cleanup_state);
/**
* lpfc_sriov_nr_virtfn_store - Enable the adapter for sr-iov virtual functions
*
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing the string the number of vfs to be enabled.
* @count: unused variable.
*
* Description:
* When this api is called either through user sysfs, the driver shall
* try to enable or disable SR-IOV virtual functions according to the
* following:
*
* If zero virtual function has been enabled to the physical function,
* the driver shall invoke the pci enable virtual function api trying
* to enable the virtual functions. If the nr_vfn provided is greater
* than the maximum supported, the maximum virtual function number will
* be used for invoking the api; otherwise, the nr_vfn provided shall
* be used for invoking the api. If the api call returned success, the
* actual number of virtual functions enabled will be set to the driver
* cfg_sriov_nr_virtfn; otherwise, -EINVAL shall be returned and driver
* cfg_sriov_nr_virtfn remains zero.
*
* If none-zero virtual functions have already been enabled to the
* physical function, as reflected by the driver's cfg_sriov_nr_virtfn,
* -EINVAL will be returned and the driver does nothing;
*
* If the nr_vfn provided is zero and none-zero virtual functions have
* been enabled, as indicated by the driver's cfg_sriov_nr_virtfn, the
* disabling virtual function api shall be invoded to disable all the
* virtual functions and driver's cfg_sriov_nr_virtfn shall be set to
* zero. Otherwise, if zero virtual function has been enabled, do
* nothing.
*
* Returns:
* length of the buf on success if val is in range the intended mode
* is supported.
* -EINVAL if val out of range or intended mode is not supported.
**/
static ssize_t
lpfc_sriov_nr_virtfn_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct pci_dev *pdev = phba->pcidev;
int val = 0, rc = -EINVAL;
/* Sanity check on user data */
if (!isdigit(buf[0]))
return -EINVAL;
if (sscanf(buf, "%i", &val) != 1)
return -EINVAL;
if (val < 0)
return -EINVAL;
/* Request disabling virtual functions */
if (val == 0) {
if (phba->cfg_sriov_nr_virtfn > 0) {
pci_disable_sriov(pdev);
phba->cfg_sriov_nr_virtfn = 0;
}
return strlen(buf);
}
/* Request enabling virtual functions */
if (phba->cfg_sriov_nr_virtfn > 0) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3018 There are %d virtual functions "
"enabled on physical function.\n",
phba->cfg_sriov_nr_virtfn);
return -EEXIST;
}
if (val <= LPFC_MAX_VFN_PER_PFN)
phba->cfg_sriov_nr_virtfn = val;
else {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3019 Enabling %d virtual functions is not "
"allowed.\n", val);
return -EINVAL;
}
rc = lpfc_sli_probe_sriov_nr_virtfn(phba, phba->cfg_sriov_nr_virtfn);
if (rc) {
phba->cfg_sriov_nr_virtfn = 0;
rc = -EPERM;
} else
rc = strlen(buf);
return rc;
}
LPFC_ATTR(sriov_nr_virtfn, LPFC_DEF_VFN_PER_PFN, 0, LPFC_MAX_VFN_PER_PFN,
"Enable PCIe device SR-IOV virtual fn");
lpfc_param_show(sriov_nr_virtfn)
static DEVICE_ATTR_RW(lpfc_sriov_nr_virtfn);
/**
* lpfc_request_firmware_upgrade_store - Request for Linux generic firmware upgrade
*
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing the string the number of vfs to be enabled.
* @count: unused variable.
*
* Description:
*
* Returns:
* length of the buf on success if val is in range the intended mode
* is supported.
* -EINVAL if val out of range or intended mode is not supported.
**/
static ssize_t
lpfc_request_firmware_upgrade_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
struct lpfc_hba *phba = vport->phba;
int val = 0, rc;
/* Sanity check on user data */
if (!isdigit(buf[0]))
return -EINVAL;
if (sscanf(buf, "%i", &val) != 1)
return -EINVAL;
if (val != 1)
return -EINVAL;
rc = lpfc_sli4_request_firmware_update(phba, RUN_FW_UPGRADE);
if (rc)
rc = -EPERM;
else
rc = strlen(buf);
return rc;
}
static int lpfc_req_fw_upgrade;
module_param(lpfc_req_fw_upgrade, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(lpfc_req_fw_upgrade, "Enable Linux generic firmware upgrade");
lpfc_param_show(request_firmware_upgrade)
/**
* lpfc_request_firmware_upgrade_init - Enable initial linux generic fw upgrade
* @phba: lpfc_hba pointer.
* @val: 0 or 1.
*
* Description:
* Set the initial Linux generic firmware upgrade enable or disable flag.
*
* Returns:
* zero if val saved.
* -EINVAL val out of range
**/
static int
lpfc_request_firmware_upgrade_init(struct lpfc_hba *phba, int val)
{
if (val >= 0 && val <= 1) {
phba->cfg_request_firmware_upgrade = val;
return 0;
}
return -EINVAL;
}
static DEVICE_ATTR(lpfc_req_fw_upgrade, S_IRUGO | S_IWUSR,
lpfc_request_firmware_upgrade_show,
lpfc_request_firmware_upgrade_store);
/**
* lpfc_force_rscn_store
*
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: unused string
* @count: unused variable.
*
* Description:
* Force the switch to send a RSCN to all other NPorts in our zone
* If we are direct connect pt2pt, build the RSCN command ourself
* and send to the other NPort. Not supported for private loop.
*
* Returns:
* 0 - on success
* -EIO - if command is not sent
**/
static ssize_t
lpfc_force_rscn_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
int i;
i = lpfc_issue_els_rscn(vport, 0);
if (i)
return -EIO;
return strlen(buf);
}
/*
* lpfc_force_rscn: Force an RSCN to be sent to all remote NPorts
* connected to the HBA.
*
* Value range is any ascii value
*/
static int lpfc_force_rscn;
module_param(lpfc_force_rscn, int, 0644);
MODULE_PARM_DESC(lpfc_force_rscn,
"Force an RSCN to be sent to all remote NPorts");
lpfc_param_show(force_rscn)
/**
* lpfc_force_rscn_init - Force an RSCN to be sent to all remote NPorts
* @phba: lpfc_hba pointer.
* @val: unused value.
*
* Returns:
* zero if val saved.
**/
static int
lpfc_force_rscn_init(struct lpfc_hba *phba, int val)
{
return 0;
}
static DEVICE_ATTR_RW(lpfc_force_rscn);
/**
* lpfc_fcp_imax_store
*
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: string with the number of fast-path FCP interrupts per second.
* @count: unused variable.
*
* Description:
* If val is in a valid range [636,651042], then set the adapter's
* maximum number of fast-path FCP interrupts per second.
*
* Returns:
* length of the buf on success if val is in range the intended mode
* is supported.
* -EINVAL if val out of range or intended mode is not supported.
**/
static ssize_t
lpfc_fcp_imax_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_eq_intr_info *eqi;
uint32_t usdelay;
int val = 0, i;
/* fcp_imax is only valid for SLI4 */
if (phba->sli_rev != LPFC_SLI_REV4)
return -EINVAL;
/* Sanity check on user data */
if (!isdigit(buf[0]))
return -EINVAL;
if (sscanf(buf, "%i", &val) != 1)
return -EINVAL;
/*
* Value range for the HBA is [5000,5000000]
* The value for each EQ depends on how many EQs are configured.
* Allow value == 0
*/
if (val && (val < LPFC_MIN_IMAX || val > LPFC_MAX_IMAX))
return -EINVAL;
phba->cfg_auto_imax = (val) ? 0 : 1;
if (phba->cfg_fcp_imax && !val) {
queue_delayed_work(phba->wq, &phba->eq_delay_work,
msecs_to_jiffies(LPFC_EQ_DELAY_MSECS));
for_each_present_cpu(i) {
eqi = per_cpu_ptr(phba->sli4_hba.eq_info, i);
eqi->icnt = 0;
}
}
phba->cfg_fcp_imax = (uint32_t)val;
if (phba->cfg_fcp_imax)
usdelay = LPFC_SEC_TO_USEC / phba->cfg_fcp_imax;
else
usdelay = 0;
for (i = 0; i < phba->cfg_irq_chann; i += LPFC_MAX_EQ_DELAY_EQID_CNT)
lpfc_modify_hba_eq_delay(phba, i, LPFC_MAX_EQ_DELAY_EQID_CNT,
usdelay);
return strlen(buf);
}
/*
# lpfc_fcp_imax: The maximum number of fast-path FCP interrupts per second
# for the HBA.
#
# Value range is [5,000 to 5,000,000]. Default value is 50,000.
*/
static int lpfc_fcp_imax = LPFC_DEF_IMAX;
module_param(lpfc_fcp_imax, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(lpfc_fcp_imax,
"Set the maximum number of FCP interrupts per second per HBA");
lpfc_param_show(fcp_imax)
/**
* lpfc_fcp_imax_init - Set the initial sr-iov virtual function enable
* @phba: lpfc_hba pointer.
* @val: link speed value.
*
* Description:
* If val is in a valid range [636,651042], then initialize the adapter's
* maximum number of fast-path FCP interrupts per second.
*
* Returns:
* zero if val saved.
* -EINVAL val out of range
**/
static int
lpfc_fcp_imax_init(struct lpfc_hba *phba, int val)
{
if (phba->sli_rev != LPFC_SLI_REV4) {
phba->cfg_fcp_imax = 0;
return 0;
}
if ((val >= LPFC_MIN_IMAX && val <= LPFC_MAX_IMAX) ||
(val == 0)) {
phba->cfg_fcp_imax = val;
return 0;
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3016 lpfc_fcp_imax: %d out of range, using default\n",
val);
phba->cfg_fcp_imax = LPFC_DEF_IMAX;
return 0;
}
static DEVICE_ATTR_RW(lpfc_fcp_imax);
/**
* lpfc_cq_max_proc_limit_store
*
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: string with the cq max processing limit of cqes
* @count: unused variable.
*
* Description:
* If val is in a valid range, then set value on each cq
*
* Returns:
* The length of the buf: if successful
* -ERANGE: if val is not in the valid range
* -EINVAL: if bad value format or intended mode is not supported.
**/
static ssize_t
lpfc_cq_max_proc_limit_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_queue *eq, *cq;
unsigned long val;
int i;
/* cq_max_proc_limit is only valid for SLI4 */
if (phba->sli_rev != LPFC_SLI_REV4)
return -EINVAL;
/* Sanity check on user data */
if (!isdigit(buf[0]))
return -EINVAL;
if (kstrtoul(buf, 0, &val))
return -EINVAL;
if (val < LPFC_CQ_MIN_PROC_LIMIT || val > LPFC_CQ_MAX_PROC_LIMIT)
return -ERANGE;
phba->cfg_cq_max_proc_limit = (uint32_t)val;
/* set the values on the cq's */
for (i = 0; i < phba->cfg_irq_chann; i++) {
/* Get the EQ corresponding to the IRQ vector */
eq = phba->sli4_hba.hba_eq_hdl[i].eq;
if (!eq)
continue;
list_for_each_entry(cq, &eq->child_list, list)
cq->max_proc_limit = min(phba->cfg_cq_max_proc_limit,
cq->entry_count);
}
return strlen(buf);
}
/*
* lpfc_cq_max_proc_limit: The maximum number CQE entries processed in an
* itteration of CQ processing.
*/
static int lpfc_cq_max_proc_limit = LPFC_CQ_DEF_MAX_PROC_LIMIT;
module_param(lpfc_cq_max_proc_limit, int, 0644);
MODULE_PARM_DESC(lpfc_cq_max_proc_limit,
"Set the maximum number CQEs processed in an iteration of "
"CQ processing");
lpfc_param_show(cq_max_proc_limit)
/*
* lpfc_cq_poll_threshold: Set the threshold of CQE completions in a
* single handler call which should request a polled completion rather
* than re-enabling interrupts.
*/
LPFC_ATTR_RW(cq_poll_threshold, LPFC_CQ_DEF_THRESHOLD_TO_POLL,
LPFC_CQ_MIN_THRESHOLD_TO_POLL,
LPFC_CQ_MAX_THRESHOLD_TO_POLL,
"CQE Processing Threshold to enable Polling");
/**
* lpfc_cq_max_proc_limit_init - Set the initial cq max_proc_limit
* @phba: lpfc_hba pointer.
* @val: entry limit
*
* Description:
* If val is in a valid range, then initialize the adapter's maximum
* value.
*
* Returns:
* Always returns 0 for success, even if value not always set to
* requested value. If value out of range or not supported, will fall
* back to default.
**/
static int
lpfc_cq_max_proc_limit_init(struct lpfc_hba *phba, int val)
{
phba->cfg_cq_max_proc_limit = LPFC_CQ_DEF_MAX_PROC_LIMIT;
if (phba->sli_rev != LPFC_SLI_REV4)
return 0;
if (val >= LPFC_CQ_MIN_PROC_LIMIT && val <= LPFC_CQ_MAX_PROC_LIMIT) {
phba->cfg_cq_max_proc_limit = val;
return 0;
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0371 lpfc_cq_max_proc_limit: %d out of range, using "
"default\n",
phba->cfg_cq_max_proc_limit);
return 0;
}
static DEVICE_ATTR_RW(lpfc_cq_max_proc_limit);
/**
* lpfc_fcp_cpu_map_show - Display current driver CPU affinity
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains text describing the state of the link.
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_fcp_cpu_map_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_vector_map_info *cpup;
int len = 0;
if ((phba->sli_rev != LPFC_SLI_REV4) ||
(phba->intr_type != MSIX))
return len;
switch (phba->cfg_fcp_cpu_map) {
case 0:
len += scnprintf(buf + len, PAGE_SIZE-len,
"fcp_cpu_map: No mapping (%d)\n",
phba->cfg_fcp_cpu_map);
return len;
case 1:
len += scnprintf(buf + len, PAGE_SIZE-len,
"fcp_cpu_map: HBA centric mapping (%d): "
"%d of %d CPUs online from %d possible CPUs\n",
phba->cfg_fcp_cpu_map, num_online_cpus(),
num_present_cpus(),
phba->sli4_hba.num_possible_cpu);
break;
}
while (phba->sli4_hba.curr_disp_cpu <
phba->sli4_hba.num_possible_cpu) {
cpup = &phba->sli4_hba.cpu_map[phba->sli4_hba.curr_disp_cpu];
if (!cpu_present(phba->sli4_hba.curr_disp_cpu))
len += scnprintf(buf + len, PAGE_SIZE - len,
"CPU %02d not present\n",
phba->sli4_hba.curr_disp_cpu);
else if (cpup->eq == LPFC_VECTOR_MAP_EMPTY) {
if (cpup->hdwq == LPFC_VECTOR_MAP_EMPTY)
len += scnprintf(
buf + len, PAGE_SIZE - len,
"CPU %02d hdwq None "
"physid %d coreid %d ht %d ua %d\n",
phba->sli4_hba.curr_disp_cpu,
cpup->phys_id, cpup->core_id,
(cpup->flag & LPFC_CPU_MAP_HYPER),
(cpup->flag & LPFC_CPU_MAP_UNASSIGN));
else
len += scnprintf(
buf + len, PAGE_SIZE - len,
"CPU %02d EQ None hdwq %04d "
"physid %d coreid %d ht %d ua %d\n",
phba->sli4_hba.curr_disp_cpu,
cpup->hdwq, cpup->phys_id,
cpup->core_id,
(cpup->flag & LPFC_CPU_MAP_HYPER),
(cpup->flag & LPFC_CPU_MAP_UNASSIGN));
} else {
if (cpup->hdwq == LPFC_VECTOR_MAP_EMPTY)
len += scnprintf(
buf + len, PAGE_SIZE - len,
"CPU %02d hdwq None "
"physid %d coreid %d ht %d ua %d IRQ %d\n",
phba->sli4_hba.curr_disp_cpu,
cpup->phys_id,
cpup->core_id,
(cpup->flag & LPFC_CPU_MAP_HYPER),
(cpup->flag & LPFC_CPU_MAP_UNASSIGN),
lpfc_get_irq(cpup->eq));
else
len += scnprintf(
buf + len, PAGE_SIZE - len,
"CPU %02d EQ %04d hdwq %04d "
"physid %d coreid %d ht %d ua %d IRQ %d\n",
phba->sli4_hba.curr_disp_cpu,
cpup->eq, cpup->hdwq, cpup->phys_id,
cpup->core_id,
(cpup->flag & LPFC_CPU_MAP_HYPER),
(cpup->flag & LPFC_CPU_MAP_UNASSIGN),
lpfc_get_irq(cpup->eq));
}
phba->sli4_hba.curr_disp_cpu++;
/* display max number of CPUs keeping some margin */
if (phba->sli4_hba.curr_disp_cpu <
phba->sli4_hba.num_possible_cpu &&
(len >= (PAGE_SIZE - 64))) {
len += scnprintf(buf + len,
PAGE_SIZE - len, "more...\n");
break;
}
}
if (phba->sli4_hba.curr_disp_cpu == phba->sli4_hba.num_possible_cpu)
phba->sli4_hba.curr_disp_cpu = 0;
return len;
}
/**
* lpfc_fcp_cpu_map_store - Change CPU affinity of driver vectors
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: one or more lpfc_polling_flags values.
* @count: not used.
*
* Returns:
* -EINVAL - Not implemented yet.
**/
static ssize_t
lpfc_fcp_cpu_map_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
return -EINVAL;
}
/*
# lpfc_fcp_cpu_map: Defines how to map CPUs to IRQ vectors
# for the HBA.
#
# Value range is [0 to 1]. Default value is LPFC_HBA_CPU_MAP (1).
# 0 - Do not affinitze IRQ vectors
# 1 - Affintize HBA vectors with respect to each HBA
# (start with CPU0 for each HBA)
# This also defines how Hardware Queues are mapped to specific CPUs.
*/
static int lpfc_fcp_cpu_map = LPFC_HBA_CPU_MAP;
module_param(lpfc_fcp_cpu_map, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(lpfc_fcp_cpu_map,
"Defines how to map CPUs to IRQ vectors per HBA");
/**
* lpfc_fcp_cpu_map_init - Set the initial sr-iov virtual function enable
* @phba: lpfc_hba pointer.
* @val: link speed value.
*
* Description:
* If val is in a valid range [0-2], then affinitze the adapter's
* MSIX vectors.
*
* Returns:
* zero if val saved.
* -EINVAL val out of range
**/
static int
lpfc_fcp_cpu_map_init(struct lpfc_hba *phba, int val)
{
if (phba->sli_rev != LPFC_SLI_REV4) {
phba->cfg_fcp_cpu_map = 0;
return 0;
}
if (val >= LPFC_MIN_CPU_MAP && val <= LPFC_MAX_CPU_MAP) {
phba->cfg_fcp_cpu_map = val;
return 0;
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"3326 lpfc_fcp_cpu_map: %d out of range, using "
"default\n", val);
phba->cfg_fcp_cpu_map = LPFC_HBA_CPU_MAP;
return 0;
}
static DEVICE_ATTR_RW(lpfc_fcp_cpu_map);
/*
# lpfc_fcp_class: Determines FC class to use for the FCP protocol.
# Value range is [2,3]. Default value is 3.
*/
LPFC_VPORT_ATTR_R(fcp_class, 3, 2, 3,
"Select Fibre Channel class of service for FCP sequences");
/*
# lpfc_use_adisc: Use ADISC for FCP rediscovery instead of PLOGI. Value range
# is [0,1]. Default value is 1.
*/
LPFC_VPORT_ATTR_RW(use_adisc, 1, 0, 1,
"Use ADISC on rediscovery to authenticate FCP devices");
/*
# lpfc_first_burst_size: First burst size to use on the NPorts
# that support first burst.
# Value range is [0,65536]. Default value is 0.
*/
LPFC_VPORT_ATTR_RW(first_burst_size, 0, 0, 65536,
"First burst size for Targets that support first burst");
/*
* lpfc_nvmet_fb_size: NVME Target mode supported first burst size.
* When the driver is configured as an NVME target, this value is
* communicated to the NVME initiator in the PRLI response. It is
* used only when the lpfc_nvme_enable_fb and lpfc_nvmet_support
* parameters are set and the target is sending the PRLI RSP.
* Parameter supported on physical port only - no NPIV support.
* Value range is [0,65536]. Default value is 0.
*/
LPFC_ATTR_RW(nvmet_fb_size, 0, 0, 65536,
"NVME Target mode first burst size in 512B increments.");
/*
* lpfc_nvme_enable_fb: Enable NVME first burst on I and T functions.
* For the Initiator (I), enabling this parameter means that an NVMET
* PRLI response with FBA enabled and an FB_SIZE set to a nonzero value will be
* processed by the initiator for subsequent NVME FCP IO.
* Currently, this feature is not supported on the NVME target
* Value range is [0,1]. Default value is 0 (disabled).
*/
LPFC_ATTR_RW(nvme_enable_fb, 0, 0, 1,
"Enable First Burst feature for NVME Initiator.");
/*
# lpfc_max_scsicmpl_time: Use scsi command completion time to control I/O queue
# depth. Default value is 0. When the value of this parameter is zero the
# SCSI command completion time is not used for controlling I/O queue depth. When
# the parameter is set to a non-zero value, the I/O queue depth is controlled
# to limit the I/O completion time to the parameter value.
# The value is set in milliseconds.
*/
LPFC_VPORT_ATTR(max_scsicmpl_time, 0, 0, 60000,
"Use command completion time to control queue depth");
lpfc_vport_param_show(max_scsicmpl_time);
static int
lpfc_max_scsicmpl_time_set(struct lpfc_vport *vport, int val)
{
struct lpfc_nodelist *ndlp, *next_ndlp;
unsigned long iflags;
if (val == vport->cfg_max_scsicmpl_time)
return 0;
if ((val < 0) || (val > 60000))
return -EINVAL;
vport->cfg_max_scsicmpl_time = val;
spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags);
list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
continue;
ndlp->cmd_qdepth = vport->cfg_tgt_queue_depth;
}
spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags);
return 0;
}
lpfc_vport_param_store(max_scsicmpl_time);
static DEVICE_ATTR_RW(lpfc_max_scsicmpl_time);
/*
# lpfc_ack0: Use ACK0, instead of ACK1 for class 2 acknowledgment. Value
# range is [0,1]. Default value is 0.
*/
LPFC_ATTR_R(ack0, 0, 0, 1, "Enable ACK0 support");
/*
# lpfc_xri_rebalancing: enable or disable XRI rebalancing feature
# range is [0,1]. Default value is 1.
*/
LPFC_ATTR_R(xri_rebalancing, 1, 0, 1, "Enable/Disable XRI rebalancing");
/*
* lpfc_io_sched: Determine scheduling algrithmn for issuing FCP cmds
* range is [0,1]. Default value is 0.
* For [0], FCP commands are issued to Work Queues based on upper layer
* hardware queue index.
* For [1], FCP commands are issued to a Work Queue associated with the
* current CPU.
*
* LPFC_FCP_SCHED_BY_HDWQ == 0
* LPFC_FCP_SCHED_BY_CPU == 1
*
* The driver dynamically sets this to 1 (BY_CPU) if it's able to set up cpu
* affinity for FCP/NVME I/Os through Work Queues associated with the current
* CPU. Otherwise, the default 0 (Round Robin) scheduling of FCP/NVME I/Os
* through WQs will be used.
*/
LPFC_ATTR_RW(fcp_io_sched, LPFC_FCP_SCHED_BY_CPU,
LPFC_FCP_SCHED_BY_HDWQ,
LPFC_FCP_SCHED_BY_CPU,
"Determine scheduling algorithm for "
"issuing commands [0] - Hardware Queue, [1] - Current CPU");
/*
* lpfc_ns_query: Determine algrithmn for NameServer queries after RSCN
* range is [0,1]. Default value is 0.
* For [0], GID_FT is used for NameServer queries after RSCN (default)
* For [1], GID_PT is used for NameServer queries after RSCN
*
*/
LPFC_ATTR_RW(ns_query, LPFC_NS_QUERY_GID_FT,
LPFC_NS_QUERY_GID_FT, LPFC_NS_QUERY_GID_PT,
"Determine algorithm NameServer queries after RSCN "
"[0] - GID_FT, [1] - GID_PT");
/*
# lpfc_fcp2_no_tgt_reset: Determine bus reset behavior
# range is [0,1]. Default value is 0.
# For [0], bus reset issues target reset to ALL devices
# For [1], bus reset issues target reset to non-FCP2 devices
*/
LPFC_ATTR_RW(fcp2_no_tgt_reset, 0, 0, 1, "Determine bus reset behavior for "
"FCP2 devices [0] - issue tgt reset, [1] - no tgt reset");
/*
# lpfc_cr_delay & lpfc_cr_count: Default values for I/O colaesing
# cr_delay (msec) or cr_count outstanding commands. cr_delay can take
# value [0,63]. cr_count can take value [1,255]. Default value of cr_delay
# is 0. Default value of cr_count is 1. The cr_count feature is disabled if
# cr_delay is set to 0.
*/
LPFC_ATTR_RW(cr_delay, 0, 0, 63, "A count of milliseconds after which an "
"interrupt response is generated");
LPFC_ATTR_RW(cr_count, 1, 1, 255, "A count of I/O completions after which an "
"interrupt response is generated");
/*
# lpfc_multi_ring_support: Determines how many rings to spread available
# cmd/rsp IOCB entries across.
# Value range is [1,2]. Default value is 1.
*/
LPFC_ATTR_R(multi_ring_support, 1, 1, 2, "Determines number of primary "
"SLI rings to spread IOCB entries across");
/*
# lpfc_multi_ring_rctl: If lpfc_multi_ring_support is enabled, this
# identifies what rctl value to configure the additional ring for.
# Value range is [1,0xff]. Default value is 4 (Unsolicited Data).
*/
LPFC_ATTR_R(multi_ring_rctl, FC_RCTL_DD_UNSOL_DATA, 1,
255, "Identifies RCTL for additional ring configuration");
/*
# lpfc_multi_ring_type: If lpfc_multi_ring_support is enabled, this
# identifies what type value to configure the additional ring for.
# Value range is [1,0xff]. Default value is 5 (LLC/SNAP).
*/
LPFC_ATTR_R(multi_ring_type, FC_TYPE_IP, 1,
255, "Identifies TYPE for additional ring configuration");
/*
# lpfc_enable_SmartSAN: Sets up FDMI support for SmartSAN
# 0 = SmartSAN functionality disabled (default)
# 1 = SmartSAN functionality enabled
# This parameter will override the value of lpfc_fdmi_on module parameter.
# Value range is [0,1]. Default value is 0.
*/
LPFC_ATTR_R(enable_SmartSAN, 0, 0, 1, "Enable SmartSAN functionality");
/*
# lpfc_fdmi_on: Controls FDMI support.
# 0 No FDMI support
# 1 Traditional FDMI support (default)
# Traditional FDMI support means the driver will assume FDMI-2 support;
# however, if that fails, it will fallback to FDMI-1.
# If lpfc_enable_SmartSAN is set to 1, the driver ignores lpfc_fdmi_on.
# If lpfc_enable_SmartSAN is set 0, the driver uses the current value of
# lpfc_fdmi_on.
# Value range [0,1]. Default value is 1.
*/
LPFC_ATTR_R(fdmi_on, 1, 0, 1, "Enable FDMI support");
/*
# Specifies the maximum number of ELS cmds we can have outstanding (for
# discovery). Value range is [1,64]. Default value = 32.
*/
LPFC_VPORT_ATTR(discovery_threads, 32, 1, 64, "Maximum number of ELS commands "
"during discovery");
/*
# lpfc_max_luns: maximum allowed LUN ID. This is the highest LUN ID that
# will be scanned by the SCSI midlayer when sequential scanning is
# used; and is also the highest LUN ID allowed when the SCSI midlayer
# parses REPORT_LUN responses. The lpfc driver has no LUN count or
# LUN ID limit, but the SCSI midlayer requires this field for the uses
# above. The lpfc driver limits the default value to 255 for two reasons.
# As it bounds the sequential scan loop, scanning for thousands of luns
# on a target can take minutes of wall clock time. Additionally,
# there are FC targets, such as JBODs, that only recognize 8-bits of
# LUN ID. When they receive a value greater than 8 bits, they chop off
# the high order bits. In other words, they see LUN IDs 0, 256, 512,
# and so on all as LUN ID 0. This causes the linux kernel, which sees
# valid responses at each of the LUN IDs, to believe there are multiple
# devices present, when in fact, there is only 1.
# A customer that is aware of their target behaviors, and the results as
# indicated above, is welcome to increase the lpfc_max_luns value.
# As mentioned, this value is not used by the lpfc driver, only the
# SCSI midlayer.
# Value range is [0,65535]. Default value is 255.
# NOTE: The SCSI layer might probe all allowed LUN on some old targets.
*/
LPFC_VPORT_ULL_ATTR_R(max_luns, 255, 0, 65535, "Maximum allowed LUN ID");
/*
# lpfc_poll_tmo: .Milliseconds driver will wait between polling FCP ring.
# Value range is [1,255], default value is 10.
*/
LPFC_ATTR_RW(poll_tmo, 10, 1, 255,
"Milliseconds driver will wait between polling FCP ring");
/*
# lpfc_task_mgmt_tmo: Maximum time to wait for task management commands
# to complete in seconds. Value range is [5,180], default value is 60.
*/
LPFC_ATTR_RW(task_mgmt_tmo, 60, 5, 180,
"Maximum time to wait for task management commands to complete");
/*
# lpfc_use_msi: Use MSI (Message Signaled Interrupts) in systems that
# support this feature
# 0 = MSI disabled
# 1 = MSI enabled
# 2 = MSI-X enabled (default)
# Value range is [0,2]. Default value is 2.
*/
LPFC_ATTR_R(use_msi, 2, 0, 2, "Use Message Signaled Interrupts (1) or "
"MSI-X (2), if possible");
/*
* lpfc_nvme_oas: Use the oas bit when sending NVME/NVMET IOs
*
* 0 = NVME OAS disabled
* 1 = NVME OAS enabled
*
* Value range is [0,1]. Default value is 0.
*/
LPFC_ATTR_RW(nvme_oas, 0, 0, 1,
"Use OAS bit on NVME IOs");
/*
* lpfc_nvme_embed_cmd: Use the oas bit when sending NVME/NVMET IOs
*
* 0 = Put NVME Command in SGL
* 1 = Embed NVME Command in WQE (unless G7)
* 2 = Embed NVME Command in WQE (force)
*
* Value range is [0,2]. Default value is 1.
*/
LPFC_ATTR_RW(nvme_embed_cmd, 1, 0, 2,
"Embed NVME Command in WQE");
/*
* lpfc_fcp_mq_threshold: Set the maximum number of Hardware Queues
* the driver will advertise it supports to the SCSI layer.
*
* 0 = Set nr_hw_queues by the number of CPUs or HW queues.
* 1,256 = Manually specify nr_hw_queue value to be advertised,
*
* Value range is [0,256]. Default value is 8.
*/
LPFC_ATTR_R(fcp_mq_threshold, LPFC_FCP_MQ_THRESHOLD_DEF,
LPFC_FCP_MQ_THRESHOLD_MIN, LPFC_FCP_MQ_THRESHOLD_MAX,
"Set the number of SCSI Queues advertised");
/*
* lpfc_hdw_queue: Set the number of Hardware Queues the driver
* will advertise it supports to the NVME and SCSI layers. This also
* will map to the number of CQ/WQ pairs the driver will create.
*
* The NVME Layer will try to create this many, plus 1 administrative
* hardware queue. The administrative queue will always map to WQ 0
* A hardware IO queue maps (qidx) to a specific driver CQ/WQ.
*
* 0 = Configure the number of hdw queues to the number of active CPUs.
* 1,256 = Manually specify how many hdw queues to use.
*
* Value range is [0,256]. Default value is 0.
*/
LPFC_ATTR_R(hdw_queue,
LPFC_HBA_HDWQ_DEF,
LPFC_HBA_HDWQ_MIN, LPFC_HBA_HDWQ_MAX,
"Set the number of I/O Hardware Queues");
#if IS_ENABLED(CONFIG_X86)
/**
* lpfc_cpumask_irq_mode_init - initalizes cpumask of phba based on
* irq_chann_mode
* @phba: Pointer to HBA context object.
**/
static void
lpfc_cpumask_irq_mode_init(struct lpfc_hba *phba)
{
unsigned int cpu, first_cpu, numa_node = NUMA_NO_NODE;
const struct cpumask *sibling_mask;
struct cpumask *aff_mask = &phba->sli4_hba.irq_aff_mask;
cpumask_clear(aff_mask);
if (phba->irq_chann_mode == NUMA_MODE) {
/* Check if we're a NUMA architecture */
numa_node = dev_to_node(&phba->pcidev->dev);
if (numa_node == NUMA_NO_NODE) {
phba->irq_chann_mode = NORMAL_MODE;
return;
}
}
for_each_possible_cpu(cpu) {
switch (phba->irq_chann_mode) {
case NUMA_MODE:
if (cpu_to_node(cpu) == numa_node)
cpumask_set_cpu(cpu, aff_mask);
break;
case NHT_MODE:
sibling_mask = topology_sibling_cpumask(cpu);
first_cpu = cpumask_first(sibling_mask);
if (first_cpu < nr_cpu_ids)
cpumask_set_cpu(first_cpu, aff_mask);
break;
default:
break;
}
}
}
#endif
static void
lpfc_assign_default_irq_chann(struct lpfc_hba *phba)
{
#if IS_ENABLED(CONFIG_X86)
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
/* If AMD architecture, then default is NUMA_MODE */
phba->irq_chann_mode = NUMA_MODE;
break;
case X86_VENDOR_INTEL:
/* If Intel architecture, then default is no hyperthread mode */
phba->irq_chann_mode = NHT_MODE;
break;
default:
phba->irq_chann_mode = NORMAL_MODE;
break;
}
lpfc_cpumask_irq_mode_init(phba);
#else
phba->irq_chann_mode = NORMAL_MODE;
#endif
}
/*
* lpfc_irq_chann: Set the number of IRQ vectors that are available
* for Hardware Queues to utilize. This also will map to the number
* of EQ / MSI-X vectors the driver will create. This should never be
* more than the number of Hardware Queues
*
* 0 = Configure number of IRQ Channels to:
* if AMD architecture, number of CPUs on HBA's NUMA node
* if Intel architecture, number of physical CPUs.
* otherwise, number of active CPUs.
* [1,256] = Manually specify how many IRQ Channels to use.
*
* Value range is [0,256]. Default value is [0].
*/
static uint lpfc_irq_chann = LPFC_IRQ_CHANN_DEF;
module_param(lpfc_irq_chann, uint, 0444);
MODULE_PARM_DESC(lpfc_irq_chann, "Set number of interrupt vectors to allocate");
/* lpfc_irq_chann_init - Set the hba irq_chann initial value
* @phba: lpfc_hba pointer.
* @val: contains the initial value
*
* Description:
* Validates the initial value is within range and assigns it to the
* adapter. If not in range, an error message is posted and the
* default value is assigned.
*
* Returns:
* zero if value is in range and is set
* -EINVAL if value was out of range
**/
static int
lpfc_irq_chann_init(struct lpfc_hba *phba, uint32_t val)
{
const struct cpumask *aff_mask;
if (phba->cfg_use_msi != 2) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"8532 use_msi = %u ignoring cfg_irq_numa\n",
phba->cfg_use_msi);
phba->irq_chann_mode = NORMAL_MODE;
phba->cfg_irq_chann = LPFC_IRQ_CHANN_DEF;
return 0;
}
/* Check if default setting was passed */
if (val == LPFC_IRQ_CHANN_DEF &&
phba->cfg_hdw_queue == LPFC_HBA_HDWQ_DEF &&
phba->sli_rev == LPFC_SLI_REV4)
lpfc_assign_default_irq_chann(phba);
if (phba->irq_chann_mode != NORMAL_MODE) {
aff_mask = &phba->sli4_hba.irq_aff_mask;
if (cpumask_empty(aff_mask)) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"8533 Could not identify CPUS for "
"mode %d, ignoring\n",
phba->irq_chann_mode);
phba->irq_chann_mode = NORMAL_MODE;
phba->cfg_irq_chann = LPFC_IRQ_CHANN_DEF;
} else {
phba->cfg_irq_chann = cpumask_weight(aff_mask);
/* If no hyperthread mode, then set hdwq count to
* aff_mask weight as well
*/
if (phba->irq_chann_mode == NHT_MODE)
phba->cfg_hdw_queue = phba->cfg_irq_chann;
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"8543 lpfc_irq_chann set to %u "
"(mode: %d)\n", phba->cfg_irq_chann,
phba->irq_chann_mode);
}
} else {
if (val > LPFC_IRQ_CHANN_MAX) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"8545 lpfc_irq_chann attribute cannot "
"be set to %u, allowed range is "
"[%u,%u]\n",
val,
LPFC_IRQ_CHANN_MIN,
LPFC_IRQ_CHANN_MAX);
phba->cfg_irq_chann = LPFC_IRQ_CHANN_DEF;
return -EINVAL;
}
if (phba->sli_rev == LPFC_SLI_REV4) {
phba->cfg_irq_chann = val;
} else {
phba->cfg_irq_chann = 2;
phba->cfg_hdw_queue = 1;
}
}
return 0;
}
/**
* lpfc_irq_chann_show - Display value of irq_chann
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains a string with the list sizes
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_irq_chann_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
struct lpfc_hba *phba = vport->phba;
return scnprintf(buf, PAGE_SIZE, "%u\n", phba->cfg_irq_chann);
}
static DEVICE_ATTR_RO(lpfc_irq_chann);
/*
# lpfc_enable_hba_reset: Allow or prevent HBA resets to the hardware.
# 0 = HBA resets disabled
# 1 = HBA resets enabled (default)
# 2 = HBA reset via PCI bus reset enabled
# Value range is [0,2]. Default value is 1.
*/
LPFC_ATTR_RW(enable_hba_reset, 1, 0, 2, "Enable HBA resets from the driver.");
/*
# lpfc_enable_hba_heartbeat: Disable HBA heartbeat timer..
# 0 = HBA Heartbeat disabled
# 1 = HBA Heartbeat enabled (default)
# Value range is [0,1]. Default value is 1.
*/
LPFC_ATTR_R(enable_hba_heartbeat, 0, 0, 1, "Enable HBA Heartbeat.");
/*
# lpfc_EnableXLane: Enable Express Lane Feature
# 0x0 Express Lane Feature disabled
# 0x1 Express Lane Feature enabled
# Value range is [0,1]. Default value is 0.
*/
LPFC_ATTR_R(EnableXLane, 0, 0, 1, "Enable Express Lane Feature.");
/*
# lpfc_XLanePriority: Define CS_CTL priority for Express Lane Feature
# 0x0 - 0x7f = CS_CTL field in FC header (high 7 bits)
# Value range is [0x0,0x7f]. Default value is 0
*/
LPFC_ATTR_RW(XLanePriority, 0, 0x0, 0x7f, "CS_CTL for Express Lane Feature.");
/*
# lpfc_enable_bg: Enable BlockGuard (Emulex's Implementation of T10-DIF)
# 0 = BlockGuard disabled (default)
# 1 = BlockGuard enabled
# Value range is [0,1]. Default value is 0.
*/
LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support");
/*
# lpfc_prot_mask:
# - Bit mask of host protection capabilities used to register with the
# SCSI mid-layer
# - Only meaningful if BG is turned on (lpfc_enable_bg=1).
# - Allows you to ultimately specify which profiles to use
# - Default will result in registering capabilities for all profiles.
# - SHOST_DIF_TYPE1_PROTECTION 1
# HBA supports T10 DIF Type 1: HBA to Target Type 1 Protection
# - SHOST_DIX_TYPE0_PROTECTION 8
# HBA supports DIX Type 0: Host to HBA protection only
# - SHOST_DIX_TYPE1_PROTECTION 16
# HBA supports DIX Type 1: Host to HBA Type 1 protection
#
*/
LPFC_ATTR(prot_mask,
(SHOST_DIF_TYPE1_PROTECTION |
SHOST_DIX_TYPE0_PROTECTION |
SHOST_DIX_TYPE1_PROTECTION),
0,
(SHOST_DIF_TYPE1_PROTECTION |
SHOST_DIX_TYPE0_PROTECTION |
SHOST_DIX_TYPE1_PROTECTION),
"T10-DIF host protection capabilities mask");
/*
# lpfc_prot_guard:
# - Bit mask of protection guard types to register with the SCSI mid-layer
# - Guard types are currently either 1) T10-DIF CRC 2) IP checksum
# - Allows you to ultimately specify which profiles to use
# - Default will result in registering capabilities for all guard types
#
*/
LPFC_ATTR(prot_guard,
SHOST_DIX_GUARD_IP, SHOST_DIX_GUARD_CRC, SHOST_DIX_GUARD_IP,
"T10-DIF host protection guard type");
/*
* Delay initial NPort discovery when Clean Address bit is cleared in
* FLOGI/FDISC accept and FCID/Fabric name/Fabric portname is changed.
* This parameter can have value 0 or 1.
* When this parameter is set to 0, no delay is added to the initial
* discovery.
* When this parameter is set to non-zero value, initial Nport discovery is
* delayed by ra_tov seconds when Clean Address bit is cleared in FLOGI/FDISC
* accept and FCID/Fabric name/Fabric portname is changed.
* Driver always delay Nport discovery for subsequent FLOGI/FDISC completion
* when Clean Address bit is cleared in FLOGI/FDISC
* accept and FCID/Fabric name/Fabric portname is changed.
* Default value is 0.
*/
LPFC_ATTR(delay_discovery, 0, 0, 1,
"Delay NPort discovery when Clean Address bit is cleared.");
/*
* lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count
* This value can be set to values between 64 and 4096. The default value
* is 64, but may be increased to allow for larger Max I/O sizes. The scsi
* and nvme layers will allow I/O sizes up to (MAX_SEG_COUNT * SEG_SIZE).
* Because of the additional overhead involved in setting up T10-DIF,
* this parameter will be limited to 128 if BlockGuard is enabled under SLI4
* and will be limited to 512 if BlockGuard is enabled under SLI3.
*/
static uint lpfc_sg_seg_cnt = LPFC_DEFAULT_SG_SEG_CNT;
module_param(lpfc_sg_seg_cnt, uint, 0444);
MODULE_PARM_DESC(lpfc_sg_seg_cnt, "Max Scatter Gather Segment Count");
/**
* lpfc_sg_seg_cnt_show - Display the scatter/gather list sizes
* configured for the adapter
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains a string with the list sizes
*
* Returns: size of formatted string.
**/
static ssize_t
lpfc_sg_seg_cnt_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
struct lpfc_hba *phba = vport->phba;
int len;
len = scnprintf(buf, PAGE_SIZE, "SGL sz: %d total SGEs: %d\n",
phba->cfg_sg_dma_buf_size, phba->cfg_total_seg_cnt);
len += scnprintf(buf + len, PAGE_SIZE - len,
"Cfg: %d SCSI: %d NVME: %d\n",
phba->cfg_sg_seg_cnt, phba->cfg_scsi_seg_cnt,
phba->cfg_nvme_seg_cnt);
return len;
}
static DEVICE_ATTR_RO(lpfc_sg_seg_cnt);
/**
* lpfc_sg_seg_cnt_init - Set the hba sg_seg_cnt initial value
* @phba: lpfc_hba pointer.
* @val: contains the initial value
*
* Description:
* Validates the initial value is within range and assigns it to the
* adapter. If not in range, an error message is posted and the
* default value is assigned.
*
* Returns:
* zero if value is in range and is set
* -EINVAL if value was out of range
**/
static int
lpfc_sg_seg_cnt_init(struct lpfc_hba *phba, int val)
{
if (val >= LPFC_MIN_SG_SEG_CNT && val <= LPFC_MAX_SG_SEG_CNT) {
phba->cfg_sg_seg_cnt = val;
return 0;
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"0409 lpfc_sg_seg_cnt attribute cannot be set to %d, "
"allowed range is [%d, %d]\n",
val, LPFC_MIN_SG_SEG_CNT, LPFC_MAX_SG_SEG_CNT);
phba->cfg_sg_seg_cnt = LPFC_DEFAULT_SG_SEG_CNT;
return -EINVAL;
}
/*
* lpfc_enable_mds_diags: Enable MDS Diagnostics
* 0 = MDS Diagnostics disabled (default)
* 1 = MDS Diagnostics enabled
* Value range is [0,1]. Default value is 0.
*/
LPFC_ATTR_RW(enable_mds_diags, 0, 0, 1, "Enable MDS Diagnostics");
/*
* lpfc_ras_fwlog_buffsize: Firmware logging host buffer size
* 0 = Disable firmware logging (default)
* [1-4] = Multiple of 1/4th Mb of host memory for FW logging
* Value range [0..4]. Default value is 0
*/
LPFC_ATTR(ras_fwlog_buffsize, 0, 0, 4, "Host memory for FW logging");
lpfc_param_show(ras_fwlog_buffsize);
static ssize_t
lpfc_ras_fwlog_buffsize_set(struct lpfc_hba *phba, uint val)
{
int ret = 0;
enum ras_state state;
if (!lpfc_rangecheck(val, 0, 4))
return -EINVAL;
if (phba->cfg_ras_fwlog_buffsize == val)
return 0;
if (phba->cfg_ras_fwlog_func != PCI_FUNC(phba->pcidev->devfn))
return -EINVAL;
spin_lock_irq(&phba->ras_fwlog_lock);
state = phba->ras_fwlog.state;
spin_unlock_irq(&phba->ras_fwlog_lock);
if (state == REG_INPROGRESS) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "6147 RAS Logging "
"registration is in progress\n");
return -EBUSY;
}
/* For disable logging: stop the logs and free the DMA.
* For ras_fwlog_buffsize size change we still need to free and
* reallocate the DMA in lpfc_sli4_ras_fwlog_init.
*/
phba->cfg_ras_fwlog_buffsize = val;
if (state == ACTIVE) {
lpfc_ras_stop_fwlog(phba);
lpfc_sli4_ras_dma_free(phba);
}
lpfc_sli4_ras_init(phba);
if (phba->ras_fwlog.ras_enabled)
ret = lpfc_sli4_ras_fwlog_init(phba, phba->cfg_ras_fwlog_level,
LPFC_RAS_ENABLE_LOGGING);
return ret;
}
lpfc_param_store(ras_fwlog_buffsize);
static DEVICE_ATTR_RW(lpfc_ras_fwlog_buffsize);
/*
* lpfc_ras_fwlog_level: Firmware logging verbosity level
* Valid only if firmware logging is enabled
* 0(Least Verbosity) 4 (most verbosity)
* Value range is [0..4]. Default value is 0
*/
LPFC_ATTR_RW(ras_fwlog_level, 0, 0, 4, "Firmware Logging Level");
/*
* lpfc_ras_fwlog_func: Firmware logging enabled on function number
* Default function which has RAS support : 0
* Value Range is [0..3].
* FW logging is a global action and enablement is via a specific
* port.
*/
LPFC_ATTR_RW(ras_fwlog_func, 0, 0, 3, "Firmware Logging Enabled on Function");
/*
* lpfc_enable_bbcr: Enable BB Credit Recovery
* 0 = BB Credit Recovery disabled
* 1 = BB Credit Recovery enabled (default)
* Value range is [0,1]. Default value is 1.
*/
LPFC_BBCR_ATTR_RW(enable_bbcr, 1, 0, 1, "Enable BBC Recovery");
/* Signaling module parameters */
int lpfc_fabric_cgn_frequency = 100; /* 100 ms default */
module_param(lpfc_fabric_cgn_frequency, int, 0444);
MODULE_PARM_DESC(lpfc_fabric_cgn_frequency, "Congestion signaling fabric freq");
unsigned char lpfc_acqe_cgn_frequency = 10; /* 10 sec default */
module_param(lpfc_acqe_cgn_frequency, byte, 0444);
MODULE_PARM_DESC(lpfc_acqe_cgn_frequency, "Congestion signaling ACQE freq");
int lpfc_use_cgn_signal = 1; /* 0 - only use FPINs, 1 - Use signals if avail */
module_param(lpfc_use_cgn_signal, int, 0444);
MODULE_PARM_DESC(lpfc_use_cgn_signal, "Use Congestion signaling if available");
/*
* lpfc_enable_dpp: Enable DPP on G7
* 0 = DPP on G7 disabled
* 1 = DPP on G7 enabled (default)
* Value range is [0,1]. Default value is 1.
*/
LPFC_ATTR_RW(enable_dpp, 1, 0, 1, "Enable Direct Packet Push");
/*
* lpfc_enable_mi: Enable FDMI MIB
* 0 = disabled
* 1 = enabled (default)
* Value range is [0,1].
*/
LPFC_ATTR_R(enable_mi, 1, 0, 1, "Enable MI");
/*
* lpfc_max_vmid: Maximum number of VMs to be tagged. This is valid only if
* either vmid_app_header or vmid_priority_tagging is enabled.
* 4 - 255 = vmid support enabled for 4-255 VMs
* Value range is [4,255].
*/
LPFC_ATTR_R(max_vmid, LPFC_MIN_VMID, LPFC_MIN_VMID, LPFC_MAX_VMID,
"Maximum number of VMs supported");
/*
* lpfc_vmid_inactivity_timeout: Inactivity timeout duration in hours
* 0 = Timeout is disabled
* Value range is [0,24].
*/
LPFC_ATTR_R(vmid_inactivity_timeout, 4, 0, 24,
"Inactivity timeout in hours");
/*
* lpfc_vmid_app_header: Enable App Header VMID support
* 0 = Support is disabled (default)
* 1 = Support is enabled
* Value range is [0,1].
*/
LPFC_ATTR_R(vmid_app_header, LPFC_VMID_APP_HEADER_DISABLE,
LPFC_VMID_APP_HEADER_DISABLE, LPFC_VMID_APP_HEADER_ENABLE,
"Enable App Header VMID support");
/*
* lpfc_vmid_priority_tagging: Enable Priority Tagging VMID support
* 0 = Support is disabled (default)
* 1 = Allow supported targets only
* 2 = Allow all targets
* Value range is [0,2].
*/
LPFC_ATTR_R(vmid_priority_tagging, LPFC_VMID_PRIO_TAG_DISABLE,
LPFC_VMID_PRIO_TAG_DISABLE,
LPFC_VMID_PRIO_TAG_ALL_TARGETS,
"Enable Priority Tagging VMID support");
static struct attribute *lpfc_hba_attrs[] = {
&dev_attr_nvme_info.attr,
&dev_attr_scsi_stat.attr,
&dev_attr_bg_info.attr,
&dev_attr_bg_guard_err.attr,
&dev_attr_bg_apptag_err.attr,
&dev_attr_bg_reftag_err.attr,
&dev_attr_info.attr,
&dev_attr_serialnum.attr,
&dev_attr_modeldesc.attr,
&dev_attr_modelname.attr,
&dev_attr_programtype.attr,
&dev_attr_portnum.attr,
&dev_attr_fwrev.attr,
&dev_attr_hdw.attr,
&dev_attr_option_rom_version.attr,
&dev_attr_link_state.attr,
&dev_attr_num_discovered_ports.attr,
&dev_attr_lpfc_drvr_version.attr,
&dev_attr_lpfc_enable_fip.attr,
&dev_attr_lpfc_temp_sensor.attr,
&dev_attr_lpfc_log_verbose.attr,
&dev_attr_lpfc_lun_queue_depth.attr,
&dev_attr_lpfc_tgt_queue_depth.attr,
&dev_attr_lpfc_hba_queue_depth.attr,
&dev_attr_lpfc_peer_port_login.attr,
&dev_attr_lpfc_nodev_tmo.attr,
&dev_attr_lpfc_devloss_tmo.attr,
&dev_attr_lpfc_enable_fc4_type.attr,
&dev_attr_lpfc_fcp_class.attr,
&dev_attr_lpfc_use_adisc.attr,
&dev_attr_lpfc_first_burst_size.attr,
&dev_attr_lpfc_ack0.attr,
&dev_attr_lpfc_xri_rebalancing.attr,
&dev_attr_lpfc_topology.attr,
&dev_attr_lpfc_scan_down.attr,
&dev_attr_lpfc_link_speed.attr,
&dev_attr_lpfc_fcp_io_sched.attr,
&dev_attr_lpfc_ns_query.attr,
&dev_attr_lpfc_fcp2_no_tgt_reset.attr,
&dev_attr_lpfc_cr_delay.attr,
&dev_attr_lpfc_cr_count.attr,
&dev_attr_lpfc_multi_ring_support.attr,
&dev_attr_lpfc_multi_ring_rctl.attr,
&dev_attr_lpfc_multi_ring_type.attr,
&dev_attr_lpfc_fdmi_on.attr,
&dev_attr_lpfc_enable_SmartSAN.attr,
&dev_attr_lpfc_max_luns.attr,
&dev_attr_lpfc_enable_npiv.attr,
&dev_attr_lpfc_fcf_failover_policy.attr,
&dev_attr_lpfc_enable_rrq.attr,
&dev_attr_lpfc_fcp_wait_abts_rsp.attr,
&dev_attr_nport_evt_cnt.attr,
&dev_attr_board_mode.attr,
&dev_attr_lpfc_xcvr_data.attr,
&dev_attr_max_vpi.attr,
&dev_attr_used_vpi.attr,
&dev_attr_max_rpi.attr,
&dev_attr_used_rpi.attr,
&dev_attr_max_xri.attr,
&dev_attr_used_xri.attr,
&dev_attr_npiv_info.attr,
&dev_attr_issue_reset.attr,
&dev_attr_lpfc_poll.attr,
&dev_attr_lpfc_poll_tmo.attr,
&dev_attr_lpfc_task_mgmt_tmo.attr,
&dev_attr_lpfc_use_msi.attr,
&dev_attr_lpfc_nvme_oas.attr,
&dev_attr_lpfc_nvme_embed_cmd.attr,
&dev_attr_lpfc_fcp_imax.attr,
&dev_attr_lpfc_force_rscn.attr,
&dev_attr_lpfc_cq_poll_threshold.attr,
&dev_attr_lpfc_cq_max_proc_limit.attr,
&dev_attr_lpfc_fcp_cpu_map.attr,
&dev_attr_lpfc_fcp_mq_threshold.attr,
&dev_attr_lpfc_hdw_queue.attr,
&dev_attr_lpfc_irq_chann.attr,
&dev_attr_lpfc_suppress_rsp.attr,
&dev_attr_lpfc_nvmet_mrq.attr,
&dev_attr_lpfc_nvmet_mrq_post.attr,
&dev_attr_lpfc_nvme_enable_fb.attr,
&dev_attr_lpfc_nvmet_fb_size.attr,
&dev_attr_lpfc_enable_bg.attr,
&dev_attr_lpfc_enable_hba_reset.attr,
&dev_attr_lpfc_enable_hba_heartbeat.attr,
&dev_attr_lpfc_EnableXLane.attr,
&dev_attr_lpfc_XLanePriority.attr,
&dev_attr_lpfc_xlane_lun.attr,
&dev_attr_lpfc_xlane_tgt.attr,
&dev_attr_lpfc_xlane_vpt.attr,
&dev_attr_lpfc_xlane_lun_state.attr,
&dev_attr_lpfc_xlane_lun_status.attr,
&dev_attr_lpfc_xlane_priority.attr,
&dev_attr_lpfc_sg_seg_cnt.attr,
&dev_attr_lpfc_max_scsicmpl_time.attr,
&dev_attr_lpfc_aer_support.attr,
&dev_attr_lpfc_aer_state_cleanup.attr,
&dev_attr_lpfc_sriov_nr_virtfn.attr,
&dev_attr_lpfc_req_fw_upgrade.attr,
&dev_attr_lpfc_suppress_link_up.attr,
&dev_attr_iocb_hw.attr,
&dev_attr_pls.attr,
&dev_attr_pt.attr,
&dev_attr_txq_hw.attr,
&dev_attr_txcmplq_hw.attr,
&dev_attr_lpfc_sriov_hw_max_virtfn.attr,
&dev_attr_protocol.attr,
&dev_attr_lpfc_xlane_supported.attr,
&dev_attr_lpfc_enable_mds_diags.attr,
&dev_attr_lpfc_ras_fwlog_buffsize.attr,
&dev_attr_lpfc_ras_fwlog_level.attr,
&dev_attr_lpfc_ras_fwlog_func.attr,
&dev_attr_lpfc_enable_bbcr.attr,
&dev_attr_lpfc_enable_dpp.attr,
&dev_attr_lpfc_enable_mi.attr,
&dev_attr_cmf_info.attr,
&dev_attr_lpfc_max_vmid.attr,
&dev_attr_lpfc_vmid_inactivity_timeout.attr,
&dev_attr_lpfc_vmid_app_header.attr,
&dev_attr_lpfc_vmid_priority_tagging.attr,
&dev_attr_lpfc_vmid_info.attr,
NULL,
};
static const struct attribute_group lpfc_hba_attr_group = {
.attrs = lpfc_hba_attrs
};
const struct attribute_group *lpfc_hba_groups[] = {
&lpfc_hba_attr_group,
NULL
};
static struct attribute *lpfc_vport_attrs[] = {
&dev_attr_info.attr,
&dev_attr_link_state.attr,
&dev_attr_num_discovered_ports.attr,
&dev_attr_lpfc_drvr_version.attr,
&dev_attr_lpfc_log_verbose.attr,
&dev_attr_lpfc_lun_queue_depth.attr,
&dev_attr_lpfc_tgt_queue_depth.attr,
&dev_attr_lpfc_nodev_tmo.attr,
&dev_attr_lpfc_devloss_tmo.attr,
&dev_attr_lpfc_hba_queue_depth.attr,
&dev_attr_lpfc_peer_port_login.attr,
&dev_attr_lpfc_restrict_login.attr,
&dev_attr_lpfc_fcp_class.attr,
&dev_attr_lpfc_use_adisc.attr,
&dev_attr_lpfc_first_burst_size.attr,
&dev_attr_lpfc_max_luns.attr,
&dev_attr_nport_evt_cnt.attr,
&dev_attr_npiv_info.attr,
&dev_attr_lpfc_enable_da_id.attr,
&dev_attr_lpfc_max_scsicmpl_time.attr,
&dev_attr_lpfc_static_vport.attr,
&dev_attr_cmf_info.attr,
NULL,
};
static const struct attribute_group lpfc_vport_attr_group = {
.attrs = lpfc_vport_attrs
};
const struct attribute_group *lpfc_vport_groups[] = {
&lpfc_vport_attr_group,
NULL
};
/**
* sysfs_ctlreg_write - Write method for writing to ctlreg
* @filp: open sysfs file
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: contains the data to be written to the adapter IOREG space.
* @off: offset into buffer to beginning of data.
* @count: bytes to transfer.
*
* Description:
* Accessed via /sys/class/scsi_host/hostxxx/ctlreg.
* Uses the adapter io control registers to send buf contents to the adapter.
*
* Returns:
* -ERANGE off and count combo out of range
* -EINVAL off, count or buff address invalid
* -EPERM adapter is offline
* value of count, buf contents written
**/
static ssize_t
sysfs_ctlreg_write(struct file *filp, struct kobject *kobj,
const struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
size_t buf_off;
struct device *dev = container_of(kobj, struct device, kobj);
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
if (phba->sli_rev >= LPFC_SLI_REV4)
return -EPERM;
if ((off + count) > FF_REG_AREA_SIZE)
return -ERANGE;
if (count <= LPFC_REG_WRITE_KEY_SIZE)
return 0;
if (off % 4 || count % 4 || (unsigned long)buf % 4)
return -EINVAL;
/* This is to protect HBA registers from accidental writes. */
if (memcmp(buf, LPFC_REG_WRITE_KEY, LPFC_REG_WRITE_KEY_SIZE))
return -EINVAL;
if (!test_bit(FC_OFFLINE_MODE, &vport->fc_flag))
return -EPERM;
spin_lock_irq(&phba->hbalock);
for (buf_off = 0; buf_off < count - LPFC_REG_WRITE_KEY_SIZE;
buf_off += sizeof(uint32_t))
writel(*((uint32_t *)(buf + buf_off + LPFC_REG_WRITE_KEY_SIZE)),
phba->ctrl_regs_memmap_p + off + buf_off);
spin_unlock_irq(&phba->hbalock);
return count;
}
/**
* sysfs_ctlreg_read - Read method for reading from ctlreg
* @filp: open sysfs file
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: if successful contains the data from the adapter IOREG space.
* @off: offset into buffer to beginning of data.
* @count: bytes to transfer.
*
* Description:
* Accessed via /sys/class/scsi_host/hostxxx/ctlreg.
* Uses the adapter io control registers to read data into buf.
*
* Returns:
* -ERANGE off and count combo out of range
* -EINVAL off, count or buff address invalid
* value of count, buf contents read
**/
static ssize_t
sysfs_ctlreg_read(struct file *filp, struct kobject *kobj,
const struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
size_t buf_off;
uint32_t * tmp_ptr;
struct device *dev = container_of(kobj, struct device, kobj);
struct Scsi_Host *shost = class_to_shost(dev);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
if (phba->sli_rev >= LPFC_SLI_REV4)
return -EPERM;
if (off > FF_REG_AREA_SIZE)
return -ERANGE;
if ((off + count) > FF_REG_AREA_SIZE)
count = FF_REG_AREA_SIZE - off;
if (count == 0) return 0;
if (off % 4 || count % 4 || (unsigned long)buf % 4)
return -EINVAL;
spin_lock_irq(&phba->hbalock);
for (buf_off = 0; buf_off < count; buf_off += sizeof(uint32_t)) {
tmp_ptr = (uint32_t *)(buf + buf_off);
*tmp_ptr = readl(phba->ctrl_regs_memmap_p + off + buf_off);
}
spin_unlock_irq(&phba->hbalock);
return count;
}
static const struct bin_attribute sysfs_ctlreg_attr = {
.attr = {
.name = "ctlreg",
.mode = S_IRUSR | S_IWUSR,
},
.size = 256,
.read = sysfs_ctlreg_read,
.write = sysfs_ctlreg_write,
};
/**
* sysfs_mbox_write - Write method for writing information via mbox
* @filp: open sysfs file
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: contains the data to be written to sysfs mbox.
* @off: offset into buffer to beginning of data.
* @count: bytes to transfer.
*
* Description:
* Deprecated function. All mailbox access from user space is performed via the
* bsg interface.
*
* Returns:
* -EPERM operation not permitted
**/
static ssize_t
sysfs_mbox_write(struct file *filp, struct kobject *kobj,
const struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
return -EPERM;
}
/**
* sysfs_mbox_read - Read method for reading information via mbox
* @filp: open sysfs file
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: contains the data to be read from sysfs mbox.
* @off: offset into buffer to beginning of data.
* @count: bytes to transfer.
*
* Description:
* Deprecated function. All mailbox access from user space is performed via the
* bsg interface.
*
* Returns:
* -EPERM operation not permitted
**/
static ssize_t
sysfs_mbox_read(struct file *filp, struct kobject *kobj,
const struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
return -EPERM;
}
static const struct bin_attribute sysfs_mbox_attr = {
.attr = {
.name = "mbox",
.mode = S_IRUSR | S_IWUSR,
},
.size = MAILBOX_SYSFS_MAX,
.read = sysfs_mbox_read,
.write = sysfs_mbox_write,
};
/**
* lpfc_alloc_sysfs_attr - Creates the ctlreg and mbox entries
* @vport: address of lpfc vport structure.
*
* Return codes:
* zero on success
* error return code from sysfs_create_bin_file()
**/
int
lpfc_alloc_sysfs_attr(struct lpfc_vport *vport)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
int error;
/* Virtual ports do not need ctrl_reg and mbox */
if (vport->port_type == LPFC_NPIV_PORT)
return 0;
error = sysfs_create_bin_file(&shost->shost_dev.kobj,
&sysfs_ctlreg_attr);
if (error)
goto out;
error = sysfs_create_bin_file(&shost->shost_dev.kobj,
&sysfs_mbox_attr);
if (error)
goto out_remove_ctlreg_attr;
return 0;
out_remove_ctlreg_attr:
sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_ctlreg_attr);
out:
return error;
}
/**
* lpfc_free_sysfs_attr - Removes the ctlreg and mbox entries
* @vport: address of lpfc vport structure.
**/
void
lpfc_free_sysfs_attr(struct lpfc_vport *vport)
{
struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
/* Virtual ports do not need ctrl_reg and mbox */
if (vport->port_type == LPFC_NPIV_PORT)
return;
sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_mbox_attr);
sysfs_remove_bin_file(&shost->shost_dev.kobj, &sysfs_ctlreg_attr);
}
/*
* Dynamic FC Host Attributes Support
*/
/**
* lpfc_get_host_symbolic_name - Copy symbolic name into the scsi host
* @shost: kernel scsi host pointer.
**/
static void
lpfc_get_host_symbolic_name(struct Scsi_Host *shost)
{
struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata;
lpfc_vport_symbolic_node_name(vport, fc_host_symbolic_name(shost),
sizeof fc_host_symbolic_name(shost));
}
/**
* lpfc_get_host_port_id - Copy the vport DID into the scsi host port id
* @shost: kernel scsi host pointer.
**/
static void
lpfc_get_host_port_id(struct Scsi_Host *shost)
{
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
/* note: fc_myDID already in cpu endianness */
fc_host_port_id(shost) = vport->fc_myDID;
}
/**
* lpfc_get_host_port_type - Set the value of the scsi host port type
* @shost: kernel scsi host pointer.
**/
static void
lpfc_get_host_port_type(struct Scsi_Host *shost)
{
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
if (vport->port_type == LPFC_NPIV_PORT) {
fc_host_port_type(shost) = FC_PORTTYPE_NPIV;
} else if (lpfc_is_link_up(phba)) {
if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
if (test_bit(FC_PUBLIC_LOOP, &vport->fc_flag))
fc_host_port_type(shost) = FC_PORTTYPE_NLPORT;
else
fc_host_port_type(shost) = FC_PORTTYPE_LPORT;
} else {
if (test_bit(FC_FABRIC, &vport->fc_flag))
fc_host_port_type(shost) = FC_PORTTYPE_NPORT;
else
fc_host_port_type(shost) = FC_PORTTYPE_PTP;
}
} else
fc_host_port_type(shost) = FC_PORTTYPE_UNKNOWN;
}
/**
* lpfc_get_host_port_state - Set the value of the scsi host port state
* @shost: kernel scsi host pointer.
**/
static void
lpfc_get_host_port_state(struct Scsi_Host *shost)
{
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag))
fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE;
else {
switch (phba->link_state) {
case LPFC_LINK_UNKNOWN:
case LPFC_LINK_DOWN:
fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN;
break;
case LPFC_LINK_UP:
case LPFC_CLEAR_LA:
case LPFC_HBA_READY:
/* Links up, reports port state accordingly */
if (vport->port_state < LPFC_VPORT_READY)
fc_host_port_state(shost) =
FC_PORTSTATE_BYPASSED;
else
fc_host_port_state(shost) =
FC_PORTSTATE_ONLINE;
break;
case LPFC_HBA_ERROR:
fc_host_port_state(shost) = FC_PORTSTATE_ERROR;
break;
default:
fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;
break;
}
}
}
/**
* lpfc_get_host_speed - Set the value of the scsi host speed
* @shost: kernel scsi host pointer.
**/
static void
lpfc_get_host_speed(struct Scsi_Host *shost)
{
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
if ((lpfc_is_link_up(phba)) &&
!test_bit(HBA_FCOE_MODE, &phba->hba_flag)) {
switch(phba->fc_linkspeed) {
case LPFC_LINK_SPEED_1GHZ:
fc_host_speed(shost) = FC_PORTSPEED_1GBIT;
break;
case LPFC_LINK_SPEED_2GHZ:
fc_host_speed(shost) = FC_PORTSPEED_2GBIT;
break;
case LPFC_LINK_SPEED_4GHZ:
fc_host_speed(shost) = FC_PORTSPEED_4GBIT;
break;
case LPFC_LINK_SPEED_8GHZ:
fc_host_speed(shost) = FC_PORTSPEED_8GBIT;
break;
case LPFC_LINK_SPEED_10GHZ:
fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
break;
case LPFC_LINK_SPEED_16GHZ:
fc_host_speed(shost) = FC_PORTSPEED_16GBIT;
break;
case LPFC_LINK_SPEED_32GHZ:
fc_host_speed(shost) = FC_PORTSPEED_32GBIT;
break;
case LPFC_LINK_SPEED_64GHZ:
fc_host_speed(shost) = FC_PORTSPEED_64GBIT;
break;
case LPFC_LINK_SPEED_128GHZ:
fc_host_speed(shost) = FC_PORTSPEED_128GBIT;
break;
case LPFC_LINK_SPEED_256GHZ:
fc_host_speed(shost) = FC_PORTSPEED_256GBIT;
break;
default:
fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
break;
}
} else if (lpfc_is_link_up(phba) &&
test_bit(HBA_FCOE_MODE, &phba->hba_flag)) {
switch (phba->fc_linkspeed) {
case LPFC_ASYNC_LINK_SPEED_1GBPS:
fc_host_speed(shost) = FC_PORTSPEED_1GBIT;
break;
case LPFC_ASYNC_LINK_SPEED_10GBPS:
fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
break;
case LPFC_ASYNC_LINK_SPEED_20GBPS:
fc_host_speed(shost) = FC_PORTSPEED_20GBIT;
break;
case LPFC_ASYNC_LINK_SPEED_25GBPS:
fc_host_speed(shost) = FC_PORTSPEED_25GBIT;
break;
case LPFC_ASYNC_LINK_SPEED_40GBPS:
fc_host_speed(shost) = FC_PORTSPEED_40GBIT;
break;
case LPFC_ASYNC_LINK_SPEED_100GBPS:
fc_host_speed(shost) = FC_PORTSPEED_100GBIT;
break;
default:
fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
break;
}
} else
fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
}
/**
* lpfc_get_host_fabric_name - Set the value of the scsi host fabric name
* @shost: kernel scsi host pointer.
**/
static void
lpfc_get_host_fabric_name (struct Scsi_Host *shost)
{
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
u64 node_name;
if (vport->port_state > LPFC_FLOGI &&
(test_bit(FC_FABRIC, &vport->fc_flag) ||
(phba->fc_topology == LPFC_TOPOLOGY_LOOP &&
test_bit(FC_PUBLIC_LOOP, &vport->fc_flag))))
node_name = wwn_to_u64(phba->fc_fabparam.nodeName.u.wwn);
else
/* fabric is local port if there is no F/FL_Port */
node_name = 0;
fc_host_fabric_name(shost) = node_name;
}
/**
* lpfc_get_stats - Return statistical information about the adapter
* @shost: kernel scsi host pointer.
*
* Notes:
* NULL on error for link down, no mbox pool, sli2 active,
* management not allowed, memory allocation error, or mbox error.
*
* Returns:
* NULL for error
* address of the adapter host statistics
**/
static struct fc_host_statistics *
lpfc_get_stats(struct Scsi_Host *shost)
{
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_sli *psli = &phba->sli;
struct fc_host_statistics *hs = &phba->link_stats;
struct lpfc_lnk_stat * lso = &psli->lnk_stat_offsets;
LPFC_MBOXQ_t *pmboxq;
MAILBOX_t *pmb;
int rc = 0;
/*
* prevent udev from issuing mailbox commands until the port is
* configured.
*/
if (phba->link_state < LPFC_LINK_DOWN ||
!phba->mbox_mem_pool ||
(phba->sli.sli_flag & LPFC_SLI_ACTIVE) == 0)
return NULL;
if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
return NULL;
pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmboxq)
return NULL;
memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
pmb = &pmboxq->u.mb;
pmb->mbxCommand = MBX_READ_STATUS;
pmb->mbxOwner = OWN_HOST;
pmboxq->ctx_buf = NULL;
pmboxq->vport = vport;
if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag)) {
rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
if (rc != MBX_SUCCESS) {
mempool_free(pmboxq, phba->mbox_mem_pool);
return NULL;
}
} else {
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
if (rc != MBX_SUCCESS) {
if (rc != MBX_TIMEOUT)
mempool_free(pmboxq, phba->mbox_mem_pool);
return NULL;
}
}
memset(hs, 0, sizeof (struct fc_host_statistics));
hs->tx_frames = pmb->un.varRdStatus.xmitFrameCnt;
hs->rx_frames = pmb->un.varRdStatus.rcvFrameCnt;
/*
* The MBX_READ_STATUS returns tx_k_bytes which has to be
* converted to words.
*
* Check if extended byte flag is set, to know when to collect upper
* bits of 64 bit wide statistics counter.
*/
if (pmb->un.varRdStatus.xkb & RD_ST_XKB) {
hs->tx_words = (u64)
((((u64)(pmb->un.varRdStatus.xmit_xkb &
RD_ST_XMIT_XKB_MASK) << 32) |
(u64)pmb->un.varRdStatus.xmitByteCnt) *
(u64)256);
hs->rx_words = (u64)
((((u64)(pmb->un.varRdStatus.rcv_xkb &
RD_ST_RCV_XKB_MASK) << 32) |
(u64)pmb->un.varRdStatus.rcvByteCnt) *
(u64)256);
} else {
hs->tx_words = (uint64_t)
((uint64_t)pmb->un.varRdStatus.xmitByteCnt
* (uint64_t)256);
hs->rx_words = (uint64_t)
((uint64_t)pmb->un.varRdStatus.rcvByteCnt
* (uint64_t)256);
}
memset(pmboxq, 0, sizeof (LPFC_MBOXQ_t));
pmb->mbxCommand = MBX_READ_LNK_STAT;
pmb->mbxOwner = OWN_HOST;
pmboxq->ctx_buf = NULL;
pmboxq->vport = vport;
if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag)) {
rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
if (rc != MBX_SUCCESS) {
mempool_free(pmboxq, phba->mbox_mem_pool);
return NULL;
}
} else {
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
if (rc != MBX_SUCCESS) {
if (rc != MBX_TIMEOUT)
mempool_free(pmboxq, phba->mbox_mem_pool);
return NULL;
}
}
hs->link_failure_count = pmb->un.varRdLnk.linkFailureCnt;
hs->loss_of_sync_count = pmb->un.varRdLnk.lossSyncCnt;
hs->loss_of_signal_count = pmb->un.varRdLnk.lossSignalCnt;
hs->prim_seq_protocol_err_count = pmb->un.varRdLnk.primSeqErrCnt;
hs->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord;
hs->invalid_crc_count = pmb->un.varRdLnk.crcCnt;
hs->error_frames = pmb->un.varRdLnk.crcCnt;
hs->cn_sig_warn = atomic64_read(&phba->cgn_acqe_stat.warn);
hs->cn_sig_alarm = atomic64_read(&phba->cgn_acqe_stat.alarm);
hs->link_failure_count -= lso->link_failure_count;
hs->loss_of_sync_count -= lso->loss_of_sync_count;
hs->loss_of_signal_count -= lso->loss_of_signal_count;
hs->prim_seq_protocol_err_count -= lso->prim_seq_protocol_err_count;
hs->invalid_tx_word_count -= lso->invalid_tx_word_count;
hs->invalid_crc_count -= lso->invalid_crc_count;
hs->error_frames -= lso->error_frames;
if (test_bit(HBA_FCOE_MODE, &phba->hba_flag)) {
hs->lip_count = -1;
hs->nos_count = (phba->link_events >> 1);
hs->nos_count -= lso->link_events;
} else if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
hs->lip_count = (phba->fc_eventTag >> 1);
hs->lip_count -= lso->link_events;
hs->nos_count = -1;
} else {
hs->lip_count = -1;
hs->nos_count = (phba->fc_eventTag >> 1);
hs->nos_count -= lso->link_events;
}
hs->dumped_frames = -1;
hs->seconds_since_last_reset = ktime_get_seconds() - psli->stats_start;
mempool_free(pmboxq, phba->mbox_mem_pool);
return hs;
}
/**
* lpfc_reset_stats - Copy the adapter link stats information
* @shost: kernel scsi host pointer.
**/
static void
lpfc_reset_stats(struct Scsi_Host *shost)
{
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = vport->phba;
struct lpfc_sli *psli = &phba->sli;
struct lpfc_lnk_stat *lso = &psli->lnk_stat_offsets;
LPFC_MBOXQ_t *pmboxq;
MAILBOX_t *pmb;
int rc = 0;
if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO)
return;
pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmboxq)
return;
memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
pmb = &pmboxq->u.mb;
pmb->mbxCommand = MBX_READ_STATUS;
pmb->mbxOwner = OWN_HOST;
pmb->un.varWords[0] = 0x1; /* reset request */
pmboxq->ctx_buf = NULL;
pmboxq->vport = vport;
if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag) ||
!(psli->sli_flag & LPFC_SLI_ACTIVE)) {
rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
if (rc != MBX_SUCCESS) {
mempool_free(pmboxq, phba->mbox_mem_pool);
return;
}
} else {
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
if (rc != MBX_SUCCESS) {
if (rc != MBX_TIMEOUT)
mempool_free(pmboxq, phba->mbox_mem_pool);
return;
}
}
memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t));
pmb->mbxCommand = MBX_READ_LNK_STAT;
pmb->mbxOwner = OWN_HOST;
pmboxq->ctx_buf = NULL;
pmboxq->vport = vport;
if (test_bit(FC_OFFLINE_MODE, &vport->fc_flag) ||
!(psli->sli_flag & LPFC_SLI_ACTIVE)) {
rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL);
if (rc != MBX_SUCCESS) {
mempool_free(pmboxq, phba->mbox_mem_pool);
return;
}
} else {
rc = lpfc_sli_issue_mbox_wait(phba, pmboxq, phba->fc_ratov * 2);
if (rc != MBX_SUCCESS) {
if (rc != MBX_TIMEOUT)
mempool_free(pmboxq, phba->mbox_mem_pool);
return;
}
}
lso->link_failure_count = pmb->un.varRdLnk.linkFailureCnt;
lso->loss_of_sync_count = pmb->un.varRdLnk.lossSyncCnt;
lso->loss_of_signal_count = pmb->un.varRdLnk.lossSignalCnt;
lso->prim_seq_protocol_err_count = pmb->un.varRdLnk.primSeqErrCnt;
lso->invalid_tx_word_count = pmb->un.varRdLnk.invalidXmitWord;
lso->invalid_crc_count = pmb->un.varRdLnk.crcCnt;
lso->error_frames = pmb->un.varRdLnk.crcCnt;
if (test_bit(HBA_FCOE_MODE, &phba->hba_flag))
lso->link_events = (phba->link_events >> 1);
else
lso->link_events = (phba->fc_eventTag >> 1);
atomic64_set(&phba->cgn_acqe_stat.warn, 0);
atomic64_set(&phba->cgn_acqe_stat.alarm, 0);
memset(&shost_to_fc_host(shost)->fpin_stats, 0,
sizeof(shost_to_fc_host(shost)->fpin_stats));
psli->stats_start = ktime_get_seconds();
mempool_free(pmboxq, phba->mbox_mem_pool);
return;
}
/**
* lpfc_get_enc_info - Return encryption information about the session for
* a given remote port.
* @rport: ptr to fc_rport from scsi transport fc
*
* Given an rport object, iterate through the fc_nodes list to find node
* corresponding with rport. Pass the encryption information from the node to
* rport's encryption attribute for reporting to upper layers. Information is
* passed through nlp_enc_info struct which contains encryption status.
*
* Returns:
* - Address of rport's fc_encryption_info struct
* - NULL when not found
**/
static struct fc_encryption_info *
lpfc_get_enc_info(struct fc_rport *rport)
{
struct Scsi_Host *shost = rport_to_shost(rport);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct fc_encryption_info *ef = NULL;
struct lpfc_nodelist *ndlp, *next_ndlp;
unsigned long iflags;
spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags);
list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
if (ndlp->rport && ndlp->rport == rport) {
ef = &rport->enc_info;
ef->status = ndlp->nlp_enc_info.status;
break;
}
}
spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags);
return ef;
}
/*
* The LPFC driver treats linkdown handling as target loss events so there
* are no sysfs handlers for link_down_tmo.
*/
/**
* lpfc_get_node_by_target - Return the nodelist for a target
* @starget: kernel scsi target pointer.
*
* Returns:
* address of the node list if found
* NULL target not found
**/
static struct lpfc_nodelist *
lpfc_get_node_by_target(struct scsi_target *starget)
{
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_nodelist *ndlp;
unsigned long iflags;
spin_lock_irqsave(&vport->fc_nodes_list_lock, iflags);
/* Search for this, mapped, target ID */
list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
if (ndlp->nlp_state == NLP_STE_MAPPED_NODE &&
starget->id == ndlp->nlp_sid) {
spin_unlock_irqrestore(&vport->fc_nodes_list_lock,
iflags);
return ndlp;
}
}
spin_unlock_irqrestore(&vport->fc_nodes_list_lock, iflags);
return NULL;
}
/**
* lpfc_get_starget_port_id - Set the target port id to the ndlp DID or -1
* @starget: kernel scsi target pointer.
**/
static void
lpfc_get_starget_port_id(struct scsi_target *starget)
{
struct lpfc_nodelist *ndlp = lpfc_get_node_by_target(starget);
fc_starget_port_id(starget) = ndlp ? ndlp->nlp_DID : -1;
}
/**
* lpfc_get_starget_node_name - Set the target node name
* @starget: kernel scsi target pointer.
*
* Description: Set the target node name to the ndlp node name wwn or zero.
**/
static void
lpfc_get_starget_node_name(struct scsi_target *starget)
{
struct lpfc_nodelist *ndlp = lpfc_get_node_by_target(starget);
fc_starget_node_name(starget) =
ndlp ? wwn_to_u64(ndlp->nlp_nodename.u.wwn) : 0;
}
/**
* lpfc_get_starget_port_name - Set the target port name
* @starget: kernel scsi target pointer.
*
* Description: set the target port name to the ndlp port name wwn or zero.
**/
static void
lpfc_get_starget_port_name(struct scsi_target *starget)
{
struct lpfc_nodelist *ndlp = lpfc_get_node_by_target(starget);
fc_starget_port_name(starget) =
ndlp ? wwn_to_u64(ndlp->nlp_portname.u.wwn) : 0;
}
/**
* lpfc_set_rport_loss_tmo - Set the rport dev loss tmo
* @rport: fc rport address.
* @timeout: new value for dev loss tmo.
*
* Description:
* If timeout is non zero set the dev_loss_tmo to timeout, else set
* dev_loss_tmo to one.
**/
static void
lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
{
struct lpfc_rport_data *rdata = rport->dd_data;
struct lpfc_nodelist *ndlp = rdata->pnode;
#if (IS_ENABLED(CONFIG_NVME_FC))
struct lpfc_nvme_rport *nrport = NULL;
#endif
if (timeout)
rport->dev_loss_tmo = timeout;
else
rport->dev_loss_tmo = 1;
if (!ndlp) {
dev_info(&rport->dev, "Cannot find remote node to "
"set rport dev loss tmo, port_id x%x\n",
rport->port_id);
return;
}
#if (IS_ENABLED(CONFIG_NVME_FC))
nrport = lpfc_ndlp_get_nrport(ndlp);
if (nrport && nrport->remoteport)
nvme_fc_set_remoteport_devloss(nrport->remoteport,
rport->dev_loss_tmo);
#endif
}
/*
* lpfc_rport_show_function - Return rport target information
*
* Description:
* Macro that uses field to generate a function with the name lpfc_show_rport_
*
* lpfc_show_rport_##field: returns the bytes formatted in buf
* @cdev: class converted to an fc_rport.
* @buf: on return contains the target_field or zero.
*
* Returns: size of formatted string.
**/
#define lpfc_rport_show_function(field, format_string, sz, cast) \
static ssize_t \
lpfc_show_rport_##field (struct device *dev, \
struct device_attribute *attr, \
char *buf) \
{ \
struct fc_rport *rport = transport_class_to_rport(dev); \
struct lpfc_rport_data *rdata = rport->hostdata; \
return scnprintf(buf, sz, format_string, \
(rdata->target) ? cast rdata->target->field : 0); \
}
#define lpfc_rport_rd_attr(field, format_string, sz) \
lpfc_rport_show_function(field, format_string, sz, ) \
static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL)
/**
* lpfc_set_vport_symbolic_name - Set the vport's symbolic name
* @fc_vport: The fc_vport who's symbolic name has been changed.
*
* Description:
* This function is called by the transport after the @fc_vport's symbolic name
* has been changed. This function re-registers the symbolic name with the
* switch to propagate the change into the fabric if the vport is active.
**/
static void
lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport)
{
struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
if (vport->port_state == LPFC_VPORT_READY)
lpfc_ns_cmd(vport, SLI_CTNS_RSPN_ID, 0, 0);
}
/**
* lpfc_hba_log_verbose_init - Set hba's log verbose level
* @phba: Pointer to lpfc_hba struct.
* @verbose: Verbose level to set.
*
* This function is called by the lpfc_get_cfgparam() routine to set the
* module lpfc_log_verbose into the @phba cfg_log_verbose for use with
* log message according to the module's lpfc_log_verbose parameter setting
* before hba port or vport created.
**/
static void
lpfc_hba_log_verbose_init(struct lpfc_hba *phba, uint32_t verbose)
{
phba->cfg_log_verbose = verbose;
}
struct fc_function_template lpfc_transport_functions = {
/* fixed attributes the driver supports */
.show_host_node_name = 1,
.show_host_port_name = 1,
.show_host_supported_classes = 1,
.show_host_supported_fc4s = 1,
.show_host_supported_speeds = 1,
.show_host_maxframe_size = 1,
.get_host_symbolic_name = lpfc_get_host_symbolic_name,
.show_host_symbolic_name = 1,
/* dynamic attributes the driver supports */
.get_host_port_id = lpfc_get_host_port_id,
.show_host_port_id = 1,
.get_host_port_type = lpfc_get_host_port_type,
.show_host_port_type = 1,
.get_host_port_state = lpfc_get_host_port_state,
.show_host_port_state = 1,
/* active_fc4s is shown but doesn't change (thus no get function) */
.show_host_active_fc4s = 1,
.get_host_speed = lpfc_get_host_speed,
.show_host_speed = 1,
.get_host_fabric_name = lpfc_get_host_fabric_name,
.show_host_fabric_name = 1,
/*
* The LPFC driver treats linkdown handling as target loss events
* so there are no sysfs handlers for link_down_tmo.
*/
.get_fc_host_stats = lpfc_get_stats,
.reset_fc_host_stats = lpfc_reset_stats,
.get_fc_rport_enc_info = lpfc_get_enc_info,
.dd_fcrport_size = sizeof(struct lpfc_rport_data),
.show_rport_maxframe_size = 1,
.show_rport_supported_classes = 1,
.set_rport_dev_loss_tmo = lpfc_set_rport_loss_tmo,
.show_rport_dev_loss_tmo = 1,
.get_starget_port_id = lpfc_get_starget_port_id,
.show_starget_port_id = 1,
.get_starget_node_name = lpfc_get_starget_node_name,
.show_starget_node_name = 1,
.get_starget_port_name = lpfc_get_starget_port_name,
.show_starget_port_name = 1,
.issue_fc_host_lip = lpfc_issue_lip,
.dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk,
.terminate_rport_io = lpfc_terminate_rport_io,
.dd_fcvport_size = sizeof(struct lpfc_vport *),
.vport_disable = lpfc_vport_disable,
.set_vport_symbolic_name = lpfc_set_vport_symbolic_name,
.bsg_request = lpfc_bsg_request,
.bsg_timeout = lpfc_bsg_timeout,
};
struct fc_function_template lpfc_vport_transport_functions = {
/* fixed attributes the driver supports */
.show_host_node_name = 1,
.show_host_port_name = 1,
.show_host_supported_classes = 1,
.show_host_supported_fc4s = 1,
.show_host_supported_speeds = 1,
.show_host_maxframe_size = 1,
.get_host_symbolic_name = lpfc_get_host_symbolic_name,
.show_host_symbolic_name = 1,
/* dynamic attributes the driver supports */
.get_host_port_id = lpfc_get_host_port_id,
.show_host_port_id = 1,
.get_host_port_type = lpfc_get_host_port_type,
.show_host_port_type = 1,
.get_host_port_state = lpfc_get_host_port_state,
.show_host_port_state = 1,
/* active_fc4s is shown but doesn't change (thus no get function) */
.show_host_active_fc4s = 1,
.get_host_speed = lpfc_get_host_speed,
.show_host_speed = 1,
.get_host_fabric_name = lpfc_get_host_fabric_name,
.show_host_fabric_name = 1,
/*
* The LPFC driver treats linkdown handling as target loss events
* so there are no sysfs handlers for link_down_tmo.
*/
.get_fc_host_stats = lpfc_get_stats,
.reset_fc_host_stats = lpfc_reset_stats,
.get_fc_rport_enc_info = lpfc_get_enc_info,
.dd_fcrport_size = sizeof(struct lpfc_rport_data),
.show_rport_maxframe_size = 1,
.show_rport_supported_classes = 1,
.set_rport_dev_loss_tmo = lpfc_set_rport_loss_tmo,
.show_rport_dev_loss_tmo = 1,
.get_starget_port_id = lpfc_get_starget_port_id,
.show_starget_port_id = 1,
.get_starget_node_name = lpfc_get_starget_node_name,
.show_starget_node_name = 1,
.get_starget_port_name = lpfc_get_starget_port_name,
.show_starget_port_name = 1,
.dev_loss_tmo_callbk = lpfc_dev_loss_tmo_callbk,
.terminate_rport_io = lpfc_terminate_rport_io,
.vport_disable = lpfc_vport_disable,
.set_vport_symbolic_name = lpfc_set_vport_symbolic_name,
};
/**
* lpfc_get_hba_function_mode - Used to determine the HBA function in FCoE
* Mode
* @phba: lpfc_hba pointer.
**/
static void
lpfc_get_hba_function_mode(struct lpfc_hba *phba)
{
/* If the adapter supports FCoE mode */
switch (phba->pcidev->device) {
case PCI_DEVICE_ID_SKYHAWK:
case PCI_DEVICE_ID_SKYHAWK_VF:
case PCI_DEVICE_ID_LANCER_FCOE:
case PCI_DEVICE_ID_LANCER_FCOE_VF:
case PCI_DEVICE_ID_ZEPHYR_DCSP:
case PCI_DEVICE_ID_TIGERSHARK:
case PCI_DEVICE_ID_TOMCAT:
set_bit(HBA_FCOE_MODE, &phba->hba_flag);
break;
default:
/* for others, clear the flag */
clear_bit(HBA_FCOE_MODE, &phba->hba_flag);
}
}
/**
* lpfc_get_cfgparam - Used during probe_one to init the adapter structure
* @phba: lpfc_hba pointer.
**/
void
lpfc_get_cfgparam(struct lpfc_hba *phba)
{
lpfc_hba_log_verbose_init(phba, lpfc_log_verbose);
lpfc_fcp_io_sched_init(phba, lpfc_fcp_io_sched);
lpfc_ns_query_init(phba, lpfc_ns_query);
lpfc_fcp2_no_tgt_reset_init(phba, lpfc_fcp2_no_tgt_reset);
lpfc_cr_delay_init(phba, lpfc_cr_delay);
lpfc_cr_count_init(phba, lpfc_cr_count);
lpfc_multi_ring_support_init(phba, lpfc_multi_ring_support);
lpfc_multi_ring_rctl_init(phba, lpfc_multi_ring_rctl);
lpfc_multi_ring_type_init(phba, lpfc_multi_ring_type);
lpfc_ack0_init(phba, lpfc_ack0);
lpfc_xri_rebalancing_init(phba, lpfc_xri_rebalancing);
lpfc_topology_init(phba, lpfc_topology);
lpfc_link_speed_init(phba, lpfc_link_speed);
lpfc_poll_tmo_init(phba, lpfc_poll_tmo);
lpfc_task_mgmt_tmo_init(phba, lpfc_task_mgmt_tmo);
lpfc_enable_npiv_init(phba, lpfc_enable_npiv);
lpfc_fcf_failover_policy_init(phba, lpfc_fcf_failover_policy);
lpfc_enable_rrq_init(phba, lpfc_enable_rrq);
lpfc_fcp_wait_abts_rsp_init(phba, lpfc_fcp_wait_abts_rsp);
lpfc_fdmi_on_init(phba, lpfc_fdmi_on);
lpfc_enable_SmartSAN_init(phba, lpfc_enable_SmartSAN);
lpfc_use_msi_init(phba, lpfc_use_msi);
lpfc_nvme_oas_init(phba, lpfc_nvme_oas);
lpfc_nvme_embed_cmd_init(phba, lpfc_nvme_embed_cmd);
lpfc_fcp_imax_init(phba, lpfc_fcp_imax);
lpfc_force_rscn_init(phba, lpfc_force_rscn);
lpfc_cq_poll_threshold_init(phba, lpfc_cq_poll_threshold);
lpfc_cq_max_proc_limit_init(phba, lpfc_cq_max_proc_limit);
lpfc_fcp_cpu_map_init(phba, lpfc_fcp_cpu_map);
lpfc_enable_hba_reset_init(phba, lpfc_enable_hba_reset);
lpfc_enable_hba_heartbeat_init(phba, lpfc_enable_hba_heartbeat);
lpfc_EnableXLane_init(phba, lpfc_EnableXLane);
/* VMID Inits */
lpfc_max_vmid_init(phba, lpfc_max_vmid);
lpfc_vmid_inactivity_timeout_init(phba, lpfc_vmid_inactivity_timeout);
lpfc_vmid_app_header_init(phba, lpfc_vmid_app_header);
lpfc_vmid_priority_tagging_init(phba, lpfc_vmid_priority_tagging);
if (phba->sli_rev != LPFC_SLI_REV4)
phba->cfg_EnableXLane = 0;
lpfc_XLanePriority_init(phba, lpfc_XLanePriority);
memset(phba->cfg_oas_tgt_wwpn, 0, (8 * sizeof(uint8_t)));
memset(phba->cfg_oas_vpt_wwpn, 0, (8 * sizeof(uint8_t)));
phba->cfg_oas_lun_state = 0;
phba->cfg_oas_lun_status = 0;
phba->cfg_oas_flags = 0;
phba->cfg_oas_priority = 0;
lpfc_enable_bg_init(phba, lpfc_enable_bg);
lpfc_prot_mask_init(phba, lpfc_prot_mask);
lpfc_prot_guard_init(phba, lpfc_prot_guard);
if (phba->sli_rev == LPFC_SLI_REV4)
phba->cfg_poll = 0;
else
phba->cfg_poll = lpfc_poll;
/* Get the function mode */
lpfc_get_hba_function_mode(phba);
/* BlockGuard allowed for FC only. */
if (phba->cfg_enable_bg && test_bit(HBA_FCOE_MODE, &phba->hba_flag)) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0581 BlockGuard feature not supported\n");
/* If set, clear the BlockGuard support param */
phba->cfg_enable_bg = 0;
} else if (phba->cfg_enable_bg) {
phba->sli3_options |= LPFC_SLI3_BG_ENABLED;
}
lpfc_suppress_rsp_init(phba, lpfc_suppress_rsp);
lpfc_enable_fc4_type_init(phba, lpfc_enable_fc4_type);
lpfc_nvmet_mrq_init(phba, lpfc_nvmet_mrq);
lpfc_nvmet_mrq_post_init(phba, lpfc_nvmet_mrq_post);
/* Initialize first burst. Target vs Initiator are different. */
lpfc_nvme_enable_fb_init(phba, lpfc_nvme_enable_fb);
lpfc_nvmet_fb_size_init(phba, lpfc_nvmet_fb_size);
lpfc_fcp_mq_threshold_init(phba, lpfc_fcp_mq_threshold);
lpfc_hdw_queue_init(phba, lpfc_hdw_queue);
lpfc_irq_chann_init(phba, lpfc_irq_chann);
lpfc_enable_bbcr_init(phba, lpfc_enable_bbcr);
lpfc_enable_dpp_init(phba, lpfc_enable_dpp);
lpfc_enable_mi_init(phba, lpfc_enable_mi);
phba->cgn_p.cgn_param_mode = LPFC_CFG_OFF;
phba->cmf_active_mode = LPFC_CFG_OFF;
if (lpfc_fabric_cgn_frequency > EDC_CG_SIGFREQ_CNT_MAX ||
lpfc_fabric_cgn_frequency < EDC_CG_SIGFREQ_CNT_MIN)
lpfc_fabric_cgn_frequency = 100; /* 100 ms default */
if (phba->sli_rev != LPFC_SLI_REV4) {
/* NVME only supported on SLI4 */
phba->nvmet_support = 0;
phba->cfg_nvmet_mrq = 0;
phba->cfg_enable_fc4_type = LPFC_ENABLE_FCP;
phba->cfg_enable_bbcr = 0;
phba->cfg_xri_rebalancing = 0;
} else {
/* We MUST have FCP support */
if (!(phba->cfg_enable_fc4_type & LPFC_ENABLE_FCP))
phba->cfg_enable_fc4_type |= LPFC_ENABLE_FCP;
}
phba->cfg_auto_imax = (phba->cfg_fcp_imax) ? 0 : 1;
/* A value of 0 means use the number of CPUs found in the system */
if (phba->cfg_hdw_queue == 0)
phba->cfg_hdw_queue = phba->sli4_hba.num_present_cpu;
if (phba->cfg_irq_chann == 0)
phba->cfg_irq_chann = phba->sli4_hba.num_present_cpu;
if (phba->cfg_irq_chann > phba->cfg_hdw_queue &&
phba->sli_rev == LPFC_SLI_REV4)
phba->cfg_irq_chann = phba->cfg_hdw_queue;
lpfc_sg_seg_cnt_init(phba, lpfc_sg_seg_cnt);
lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth);
lpfc_sriov_nr_virtfn_init(phba, lpfc_sriov_nr_virtfn);
lpfc_request_firmware_upgrade_init(phba, lpfc_req_fw_upgrade);
lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up);
lpfc_delay_discovery_init(phba, lpfc_delay_discovery);
lpfc_sli_mode_init(phba, lpfc_sli_mode);
lpfc_enable_mds_diags_init(phba, lpfc_enable_mds_diags);
lpfc_ras_fwlog_buffsize_init(phba, lpfc_ras_fwlog_buffsize);
lpfc_ras_fwlog_level_init(phba, lpfc_ras_fwlog_level);
lpfc_ras_fwlog_func_init(phba, lpfc_ras_fwlog_func);
return;
}
/**
* lpfc_nvme_mod_param_dep - Adjust module parameter value based on
* dependencies between protocols and roles.
* @phba: lpfc_hba pointer.
**/
void
lpfc_nvme_mod_param_dep(struct lpfc_hba *phba)
{
int logit = 0;
if (phba->cfg_hdw_queue > phba->sli4_hba.num_present_cpu) {
phba->cfg_hdw_queue = phba->sli4_hba.num_present_cpu;
logit = 1;
}
if (phba->cfg_irq_chann > phba->sli4_hba.num_present_cpu) {
phba->cfg_irq_chann = phba->sli4_hba.num_present_cpu;
logit = 1;
}
if (phba->cfg_irq_chann > phba->cfg_hdw_queue) {
phba->cfg_irq_chann = phba->cfg_hdw_queue;
logit = 1;
}
if (logit)
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"2006 Reducing Queues - CPU limitation: "
"IRQ %d HDWQ %d\n",
phba->cfg_irq_chann,
phba->cfg_hdw_queue);
if (phba->cfg_enable_fc4_type & LPFC_ENABLE_NVME &&
phba->nvmet_support) {
phba->cfg_enable_fc4_type &= ~LPFC_ENABLE_FCP;
lpfc_printf_log(phba, KERN_INFO, LOG_NVME_DISC,
"6013 %s x%x fb_size x%x, fb_max x%x\n",
"NVME Target PRLI ACC enable_fb ",
phba->cfg_nvme_enable_fb,
phba->cfg_nvmet_fb_size,
LPFC_NVMET_FB_SZ_MAX);
if (phba->cfg_nvme_enable_fb == 0)
phba->cfg_nvmet_fb_size = 0;
else {
if (phba->cfg_nvmet_fb_size > LPFC_NVMET_FB_SZ_MAX)
phba->cfg_nvmet_fb_size = LPFC_NVMET_FB_SZ_MAX;
}
if (!phba->cfg_nvmet_mrq)
phba->cfg_nvmet_mrq = phba->cfg_hdw_queue;
/* Adjust lpfc_nvmet_mrq to avoid running out of WQE slots */
if (phba->cfg_nvmet_mrq > phba->cfg_hdw_queue) {
phba->cfg_nvmet_mrq = phba->cfg_hdw_queue;
lpfc_printf_log(phba, KERN_ERR, LOG_NVME_DISC,
"6018 Adjust lpfc_nvmet_mrq to %d\n",
phba->cfg_nvmet_mrq);
}
if (phba->cfg_nvmet_mrq > LPFC_NVMET_MRQ_MAX)
phba->cfg_nvmet_mrq = LPFC_NVMET_MRQ_MAX;
} else {
/* Not NVME Target mode. Turn off Target parameters. */
phba->nvmet_support = 0;
phba->cfg_nvmet_mrq = 0;
phba->cfg_nvmet_fb_size = 0;
}
}
/**
* lpfc_get_vport_cfgparam - Used during port create, init the vport structure
* @vport: lpfc_vport pointer.
**/
void
lpfc_get_vport_cfgparam(struct lpfc_vport *vport)
{
lpfc_log_verbose_init(vport, lpfc_log_verbose);
lpfc_lun_queue_depth_init(vport, lpfc_lun_queue_depth);
lpfc_tgt_queue_depth_init(vport, lpfc_tgt_queue_depth);
lpfc_devloss_tmo_init(vport, lpfc_devloss_tmo);
lpfc_nodev_tmo_init(vport, lpfc_nodev_tmo);
lpfc_peer_port_login_init(vport, lpfc_peer_port_login);
lpfc_restrict_login_init(vport, lpfc_restrict_login);
lpfc_fcp_class_init(vport, lpfc_fcp_class);
lpfc_use_adisc_init(vport, lpfc_use_adisc);
lpfc_first_burst_size_init(vport, lpfc_first_burst_size);
lpfc_max_scsicmpl_time_init(vport, lpfc_max_scsicmpl_time);
lpfc_discovery_threads_init(vport, lpfc_discovery_threads);
lpfc_max_luns_init(vport, lpfc_max_luns);
lpfc_scan_down_init(vport, lpfc_scan_down);
lpfc_enable_da_id_init(vport, lpfc_enable_da_id);
return;
}