| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * SLIM core rproc driver | |
| * | |
| * Copyright (C) 2016 STMicroelectronics | |
| * | |
| * Author: Peter Griffin <peter.griffin@linaro.org> | |
| */ | |
| #include <linux/clk.h> | |
| #include <linux/err.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/remoteproc.h> | |
| #include <linux/remoteproc/st_slim_rproc.h> | |
| #include "remoteproc_internal.h" | |
| /* SLIM core registers */ | |
| #define SLIM_ID_OFST 0x0 | |
| #define SLIM_VER_OFST 0x4 | |
| #define SLIM_EN_OFST 0x8 | |
| #define SLIM_EN_RUN BIT(0) | |
| #define SLIM_CLK_GATE_OFST 0xC | |
| #define SLIM_CLK_GATE_DIS BIT(0) | |
| #define SLIM_CLK_GATE_RESET BIT(2) | |
| #define SLIM_SLIM_PC_OFST 0x20 | |
| /* DMEM registers */ | |
| #define SLIM_REV_ID_OFST 0x0 | |
| #define SLIM_REV_ID_MIN_MASK GENMASK(15, 8) | |
| #define SLIM_REV_ID_MIN(id) ((id & SLIM_REV_ID_MIN_MASK) >> 8) | |
| #define SLIM_REV_ID_MAJ_MASK GENMASK(23, 16) | |
| #define SLIM_REV_ID_MAJ(id) ((id & SLIM_REV_ID_MAJ_MASK) >> 16) | |
| /* peripherals registers */ | |
| #define SLIM_STBUS_SYNC_OFST 0xF88 | |
| #define SLIM_STBUS_SYNC_DIS BIT(0) | |
| #define SLIM_INT_SET_OFST 0xFD4 | |
| #define SLIM_INT_CLR_OFST 0xFD8 | |
| #define SLIM_INT_MASK_OFST 0xFDC | |
| #define SLIM_CMD_CLR_OFST 0xFC8 | |
| #define SLIM_CMD_MASK_OFST 0xFCC | |
| static const char *mem_names[ST_SLIM_MEM_MAX] = { | |
| [ST_SLIM_DMEM] = "dmem", | |
| [ST_SLIM_IMEM] = "imem", | |
| }; | |
| static int slim_clk_get(struct st_slim_rproc *slim_rproc, struct device *dev) | |
| { | |
| int clk, err; | |
| for (clk = 0; clk < ST_SLIM_MAX_CLK; clk++) { | |
| slim_rproc->clks[clk] = of_clk_get(dev->of_node, clk); | |
| if (IS_ERR(slim_rproc->clks[clk])) { | |
| err = PTR_ERR(slim_rproc->clks[clk]); | |
| if (err == -EPROBE_DEFER) | |
| goto err_put_clks; | |
| slim_rproc->clks[clk] = NULL; | |
| break; | |
| } | |
| } | |
| return 0; | |
| err_put_clks: | |
| while (--clk >= 0) | |
| clk_put(slim_rproc->clks[clk]); | |
| return err; | |
| } | |
| static void slim_clk_disable(struct st_slim_rproc *slim_rproc) | |
| { | |
| int clk; | |
| for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++) | |
| clk_disable_unprepare(slim_rproc->clks[clk]); | |
| } | |
| static int slim_clk_enable(struct st_slim_rproc *slim_rproc) | |
| { | |
| int clk, ret; | |
| for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++) { | |
| ret = clk_prepare_enable(slim_rproc->clks[clk]); | |
| if (ret) | |
| goto err_disable_clks; | |
| } | |
| return 0; | |
| err_disable_clks: | |
| while (--clk >= 0) | |
| clk_disable_unprepare(slim_rproc->clks[clk]); | |
| return ret; | |
| } | |
| /* | |
| * Remoteproc slim specific device handlers | |
| */ | |
| static int slim_rproc_start(struct rproc *rproc) | |
| { | |
| struct device *dev = &rproc->dev; | |
| struct st_slim_rproc *slim_rproc = rproc->priv; | |
| unsigned long hw_id, hw_ver, fw_rev; | |
| u32 val; | |
| /* disable CPU pipeline clock & reset CPU pipeline */ | |
| val = SLIM_CLK_GATE_DIS | SLIM_CLK_GATE_RESET; | |
| writel(val, slim_rproc->slimcore + SLIM_CLK_GATE_OFST); | |
| /* disable SLIM core STBus sync */ | |
| writel(SLIM_STBUS_SYNC_DIS, slim_rproc->peri + SLIM_STBUS_SYNC_OFST); | |
| /* enable cpu pipeline clock */ | |
| writel(!SLIM_CLK_GATE_DIS, | |
| slim_rproc->slimcore + SLIM_CLK_GATE_OFST); | |
| /* clear int & cmd mailbox */ | |
| writel(~0U, slim_rproc->peri + SLIM_INT_CLR_OFST); | |
| writel(~0U, slim_rproc->peri + SLIM_CMD_CLR_OFST); | |
| /* enable all channels cmd & int */ | |
| writel(~0U, slim_rproc->peri + SLIM_INT_MASK_OFST); | |
| writel(~0U, slim_rproc->peri + SLIM_CMD_MASK_OFST); | |
| /* enable cpu */ | |
| writel(SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST); | |
| hw_id = readl_relaxed(slim_rproc->slimcore + SLIM_ID_OFST); | |
| hw_ver = readl_relaxed(slim_rproc->slimcore + SLIM_VER_OFST); | |
| fw_rev = readl(slim_rproc->mem[ST_SLIM_DMEM].cpu_addr + | |
| SLIM_REV_ID_OFST); | |
| dev_info(dev, "fw rev:%ld.%ld on SLIM %ld.%ld\n", | |
| SLIM_REV_ID_MAJ(fw_rev), SLIM_REV_ID_MIN(fw_rev), | |
| hw_id, hw_ver); | |
| return 0; | |
| } | |
| static int slim_rproc_stop(struct rproc *rproc) | |
| { | |
| struct st_slim_rproc *slim_rproc = rproc->priv; | |
| u32 val; | |
| /* mask all (cmd & int) channels */ | |
| writel(0UL, slim_rproc->peri + SLIM_INT_MASK_OFST); | |
| writel(0UL, slim_rproc->peri + SLIM_CMD_MASK_OFST); | |
| /* disable cpu pipeline clock */ | |
| writel(SLIM_CLK_GATE_DIS, slim_rproc->slimcore + SLIM_CLK_GATE_OFST); | |
| writel(!SLIM_EN_RUN, slim_rproc->slimcore + SLIM_EN_OFST); | |
| val = readl(slim_rproc->slimcore + SLIM_EN_OFST); | |
| if (val & SLIM_EN_RUN) | |
| dev_warn(&rproc->dev, "Failed to disable SLIM"); | |
| dev_dbg(&rproc->dev, "slim stopped\n"); | |
| return 0; | |
| } | |
| static void *slim_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len, bool *is_iomem) | |
| { | |
| struct st_slim_rproc *slim_rproc = rproc->priv; | |
| void *va = NULL; | |
| int i; | |
| for (i = 0; i < ST_SLIM_MEM_MAX; i++) { | |
| if (da != slim_rproc->mem[i].bus_addr) | |
| continue; | |
| if (len <= slim_rproc->mem[i].size) { | |
| /* __force to make sparse happy with type conversion */ | |
| va = (__force void *)slim_rproc->mem[i].cpu_addr; | |
| break; | |
| } | |
| } | |
| dev_dbg(&rproc->dev, "da = 0x%llx len = 0x%zx va = 0x%p\n", | |
| da, len, va); | |
| return va; | |
| } | |
| static const struct rproc_ops slim_rproc_ops = { | |
| .start = slim_rproc_start, | |
| .stop = slim_rproc_stop, | |
| .da_to_va = slim_rproc_da_to_va, | |
| .get_boot_addr = rproc_elf_get_boot_addr, | |
| .load = rproc_elf_load_segments, | |
| .sanity_check = rproc_elf_sanity_check, | |
| }; | |
| /** | |
| * st_slim_rproc_alloc() - allocate and initialise slim rproc | |
| * @pdev: Pointer to the platform_device struct | |
| * @fw_name: Name of firmware for rproc to use | |
| * | |
| * Function for allocating and initialising a slim rproc for use by | |
| * device drivers whose IP is based around the SLIM core. It | |
| * obtains and enables any clocks required by the SLIM core and also | |
| * ioremaps the various IO. | |
| * | |
| * Return: st_slim_rproc pointer or PTR_ERR() on error. | |
| */ | |
| struct st_slim_rproc *st_slim_rproc_alloc(struct platform_device *pdev, | |
| char *fw_name) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct st_slim_rproc *slim_rproc; | |
| struct device_node *np = dev->of_node; | |
| struct rproc *rproc; | |
| struct resource *res; | |
| int err, i; | |
| if (!fw_name) | |
| return ERR_PTR(-EINVAL); | |
| if (!of_device_is_compatible(np, "st,slim-rproc")) | |
| return ERR_PTR(-EINVAL); | |
| rproc = rproc_alloc(dev, np->name, &slim_rproc_ops, | |
| fw_name, sizeof(*slim_rproc)); | |
| if (!rproc) | |
| return ERR_PTR(-ENOMEM); | |
| rproc->has_iommu = false; | |
| slim_rproc = rproc->priv; | |
| slim_rproc->rproc = rproc; | |
| /* get imem and dmem */ | |
| for (i = 0; i < ARRAY_SIZE(mem_names); i++) { | |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, | |
| mem_names[i]); | |
| slim_rproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res); | |
| if (IS_ERR(slim_rproc->mem[i].cpu_addr)) { | |
| dev_err(&pdev->dev, "devm_ioremap_resource failed\n"); | |
| err = PTR_ERR(slim_rproc->mem[i].cpu_addr); | |
| goto err; | |
| } | |
| slim_rproc->mem[i].bus_addr = res->start; | |
| slim_rproc->mem[i].size = resource_size(res); | |
| } | |
| slim_rproc->slimcore = devm_platform_ioremap_resource_byname(pdev, "slimcore"); | |
| if (IS_ERR(slim_rproc->slimcore)) { | |
| dev_err(&pdev->dev, "failed to ioremap slimcore IO\n"); | |
| err = PTR_ERR(slim_rproc->slimcore); | |
| goto err; | |
| } | |
| slim_rproc->peri = devm_platform_ioremap_resource_byname(pdev, "peripherals"); | |
| if (IS_ERR(slim_rproc->peri)) { | |
| dev_err(&pdev->dev, "failed to ioremap peripherals IO\n"); | |
| err = PTR_ERR(slim_rproc->peri); | |
| goto err; | |
| } | |
| err = slim_clk_get(slim_rproc, dev); | |
| if (err) | |
| goto err; | |
| err = slim_clk_enable(slim_rproc); | |
| if (err) { | |
| dev_err(dev, "Failed to enable clocks\n"); | |
| goto err_clk_put; | |
| } | |
| /* Register as a remoteproc device */ | |
| err = rproc_add(rproc); | |
| if (err) { | |
| dev_err(dev, "registration of slim remoteproc failed\n"); | |
| goto err_clk_dis; | |
| } | |
| return slim_rproc; | |
| err_clk_dis: | |
| slim_clk_disable(slim_rproc); | |
| err_clk_put: | |
| for (i = 0; i < ST_SLIM_MAX_CLK && slim_rproc->clks[i]; i++) | |
| clk_put(slim_rproc->clks[i]); | |
| err: | |
| rproc_free(rproc); | |
| return ERR_PTR(err); | |
| } | |
| EXPORT_SYMBOL(st_slim_rproc_alloc); | |
| /** | |
| * st_slim_rproc_put() - put slim rproc resources | |
| * @slim_rproc: Pointer to the st_slim_rproc struct | |
| * | |
| * Function for calling respective _put() functions on slim_rproc resources. | |
| * | |
| */ | |
| void st_slim_rproc_put(struct st_slim_rproc *slim_rproc) | |
| { | |
| int clk; | |
| if (!slim_rproc) | |
| return; | |
| slim_clk_disable(slim_rproc); | |
| for (clk = 0; clk < ST_SLIM_MAX_CLK && slim_rproc->clks[clk]; clk++) | |
| clk_put(slim_rproc->clks[clk]); | |
| rproc_del(slim_rproc->rproc); | |
| rproc_free(slim_rproc->rproc); | |
| } | |
| EXPORT_SYMBOL(st_slim_rproc_put); | |
| MODULE_AUTHOR("Peter Griffin <peter.griffin@linaro.org>"); | |
| MODULE_DESCRIPTION("STMicroelectronics SLIM core rproc driver"); | |
| MODULE_LICENSE("GPL v2"); |