| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Remote Processor Framework ELF loader | |
| * | |
| * Copyright (C) 2011 Texas Instruments, Inc. | |
| * Copyright (C) 2011 Google, Inc. | |
| * | |
| * Ohad Ben-Cohen <ohad@wizery.com> | |
| * Brian Swetland <swetland@google.com> | |
| * Mark Grosen <mgrosen@ti.com> | |
| * Fernando Guzman Lugo <fernando.lugo@ti.com> | |
| * Suman Anna <s-anna@ti.com> | |
| * Robert Tivy <rtivy@ti.com> | |
| * Armando Uribe De Leon <x0095078@ti.com> | |
| * Sjur Brændeland <sjur.brandeland@stericsson.com> | |
| */ | |
| #define pr_fmt(fmt) "%s: " fmt, __func__ | |
| #include <linux/module.h> | |
| #include <linux/firmware.h> | |
| #include <linux/remoteproc.h> | |
| #include <linux/elf.h> | |
| #include "remoteproc_internal.h" | |
| #include "remoteproc_elf_helpers.h" | |
| /** | |
| * rproc_elf_sanity_check() - Sanity Check for ELF32/ELF64 firmware image | |
| * @rproc: the remote processor handle | |
| * @fw: the ELF firmware image | |
| * | |
| * Make sure this fw image is sane (ie a correct ELF32/ELF64 file). | |
| * | |
| * Return: 0 on success and -EINVAL upon any failure | |
| */ | |
| int rproc_elf_sanity_check(struct rproc *rproc, const struct firmware *fw) | |
| { | |
| const char *name = rproc->firmware; | |
| struct device *dev = &rproc->dev; | |
| /* | |
| * ELF files are beginning with the same structure. Thus, to simplify | |
| * header parsing, we can use the elf32_hdr one for both elf64 and | |
| * elf32. | |
| */ | |
| struct elf32_hdr *ehdr; | |
| u32 elf_shdr_get_size; | |
| u64 phoff, shoff; | |
| char class; | |
| u16 phnum; | |
| if (!fw) { | |
| dev_err(dev, "failed to load %s\n", name); | |
| return -EINVAL; | |
| } | |
| if (fw->size < sizeof(struct elf32_hdr)) { | |
| dev_err(dev, "Image is too small\n"); | |
| return -EINVAL; | |
| } | |
| ehdr = (struct elf32_hdr *)fw->data; | |
| if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG)) { | |
| dev_err(dev, "Image is corrupted (bad magic)\n"); | |
| return -EINVAL; | |
| } | |
| class = ehdr->e_ident[EI_CLASS]; | |
| if (class != ELFCLASS32 && class != ELFCLASS64) { | |
| dev_err(dev, "Unsupported class: %d\n", class); | |
| return -EINVAL; | |
| } | |
| if (class == ELFCLASS64 && fw->size < sizeof(struct elf64_hdr)) { | |
| dev_err(dev, "elf64 header is too small\n"); | |
| return -EINVAL; | |
| } | |
| /* We assume the firmware has the same endianness as the host */ | |
| # ifdef __LITTLE_ENDIAN | |
| if (ehdr->e_ident[EI_DATA] != ELFDATA2LSB) { | |
| # else /* BIG ENDIAN */ | |
| if (ehdr->e_ident[EI_DATA] != ELFDATA2MSB) { | |
| # endif | |
| dev_err(dev, "Unsupported firmware endianness\n"); | |
| return -EINVAL; | |
| } | |
| phoff = elf_hdr_get_e_phoff(class, fw->data); | |
| shoff = elf_hdr_get_e_shoff(class, fw->data); | |
| phnum = elf_hdr_get_e_phnum(class, fw->data); | |
| elf_shdr_get_size = elf_size_of_shdr(class); | |
| if (fw->size < shoff + elf_shdr_get_size) { | |
| dev_err(dev, "Image is too small\n"); | |
| return -EINVAL; | |
| } | |
| if (phnum == 0) { | |
| dev_err(dev, "No loadable segments\n"); | |
| return -EINVAL; | |
| } | |
| if (phoff > fw->size) { | |
| dev_err(dev, "Firmware size is too small\n"); | |
| return -EINVAL; | |
| } | |
| dev_dbg(dev, "Firmware is an elf%d file\n", | |
| class == ELFCLASS32 ? 32 : 64); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(rproc_elf_sanity_check); | |
| /** | |
| * rproc_elf_get_boot_addr() - Get rproc's boot address. | |
| * @rproc: the remote processor handle | |
| * @fw: the ELF firmware image | |
| * | |
| * Note that the boot address is not a configurable property of all remote | |
| * processors. Some will always boot at a specific hard-coded address. | |
| * | |
| * Return: entry point address of the ELF image | |
| * | |
| */ | |
| u64 rproc_elf_get_boot_addr(struct rproc *rproc, const struct firmware *fw) | |
| { | |
| return elf_hdr_get_e_entry(fw_elf_get_class(fw), fw->data); | |
| } | |
| EXPORT_SYMBOL(rproc_elf_get_boot_addr); | |
| /** | |
| * rproc_elf_load_segments() - load firmware segments to memory | |
| * @rproc: remote processor which will be booted using these fw segments | |
| * @fw: the ELF firmware image | |
| * | |
| * This function loads the firmware segments to memory, where the remote | |
| * processor expects them. | |
| * | |
| * Some remote processors will expect their code and data to be placed | |
| * in specific device addresses, and can't have them dynamically assigned. | |
| * | |
| * We currently support only those kind of remote processors, and expect | |
| * the program header's paddr member to contain those addresses. We then go | |
| * through the physically contiguous "carveout" memory regions which we | |
| * allocated (and mapped) earlier on behalf of the remote processor, | |
| * and "translate" device address to kernel addresses, so we can copy the | |
| * segments where they are expected. | |
| * | |
| * Currently we only support remote processors that required carveout | |
| * allocations and got them mapped onto their iommus. Some processors | |
| * might be different: they might not have iommus, and would prefer to | |
| * directly allocate memory for every segment/resource. This is not yet | |
| * supported, though. | |
| * | |
| * Return: 0 on success and an appropriate error code otherwise | |
| */ | |
| int rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw) | |
| { | |
| struct device *dev = &rproc->dev; | |
| const void *ehdr, *phdr; | |
| int i, ret = 0; | |
| u16 phnum; | |
| const u8 *elf_data = fw->data; | |
| u8 class = fw_elf_get_class(fw); | |
| u32 elf_phdr_get_size = elf_size_of_phdr(class); | |
| ehdr = elf_data; | |
| phnum = elf_hdr_get_e_phnum(class, ehdr); | |
| phdr = elf_data + elf_hdr_get_e_phoff(class, ehdr); | |
| /* go through the available ELF segments */ | |
| for (i = 0; i < phnum; i++, phdr += elf_phdr_get_size) { | |
| u64 da = elf_phdr_get_p_paddr(class, phdr); | |
| u64 memsz = elf_phdr_get_p_memsz(class, phdr); | |
| u64 filesz = elf_phdr_get_p_filesz(class, phdr); | |
| u64 offset = elf_phdr_get_p_offset(class, phdr); | |
| u32 type = elf_phdr_get_p_type(class, phdr); | |
| bool is_iomem = false; | |
| void *ptr; | |
| if (type != PT_LOAD || !memsz) | |
| continue; | |
| dev_dbg(dev, "phdr: type %d da 0x%llx memsz 0x%llx filesz 0x%llx\n", | |
| type, da, memsz, filesz); | |
| if (filesz > memsz) { | |
| dev_err(dev, "bad phdr filesz 0x%llx memsz 0x%llx\n", | |
| filesz, memsz); | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (offset + filesz > fw->size) { | |
| dev_err(dev, "truncated fw: need 0x%llx avail 0x%zx\n", | |
| offset + filesz, fw->size); | |
| ret = -EINVAL; | |
| break; | |
| } | |
| if (!rproc_u64_fit_in_size_t(memsz)) { | |
| dev_err(dev, "size (%llx) does not fit in size_t type\n", | |
| memsz); | |
| ret = -EOVERFLOW; | |
| break; | |
| } | |
| /* grab the kernel address for this device address */ | |
| ptr = rproc_da_to_va(rproc, da, memsz, &is_iomem); | |
| if (!ptr) { | |
| dev_err(dev, "bad phdr da 0x%llx mem 0x%llx\n", da, | |
| memsz); | |
| ret = -EINVAL; | |
| break; | |
| } | |
| /* put the segment where the remote processor expects it */ | |
| if (filesz) { | |
| if (is_iomem) | |
| memcpy_toio((void __iomem *)ptr, elf_data + offset, filesz); | |
| else | |
| memcpy(ptr, elf_data + offset, filesz); | |
| } | |
| /* | |
| * Zero out remaining memory for this segment. | |
| * | |
| * This isn't strictly required since dma_alloc_coherent already | |
| * did this for us. albeit harmless, we may consider removing | |
| * this. | |
| */ | |
| if (memsz > filesz) { | |
| if (is_iomem) | |
| memset_io((void __iomem *)(ptr + filesz), 0, memsz - filesz); | |
| else | |
| memset(ptr + filesz, 0, memsz - filesz); | |
| } | |
| } | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(rproc_elf_load_segments); | |
| static const void * | |
| find_table(struct device *dev, const struct firmware *fw) | |
| { | |
| const void *shdr, *name_table_shdr; | |
| int i; | |
| const char *name_table; | |
| struct resource_table *table = NULL; | |
| const u8 *elf_data = (void *)fw->data; | |
| u8 class = fw_elf_get_class(fw); | |
| size_t fw_size = fw->size; | |
| const void *ehdr = elf_data; | |
| u16 shnum = elf_hdr_get_e_shnum(class, ehdr); | |
| u32 elf_shdr_get_size = elf_size_of_shdr(class); | |
| u16 shstrndx = elf_hdr_get_e_shstrndx(class, ehdr); | |
| /* look for the resource table and handle it */ | |
| /* First, get the section header according to the elf class */ | |
| shdr = elf_data + elf_hdr_get_e_shoff(class, ehdr); | |
| /* Compute name table section header entry in shdr array */ | |
| name_table_shdr = shdr + (shstrndx * elf_shdr_get_size); | |
| /* Finally, compute the name table section address in elf */ | |
| name_table = elf_data + elf_shdr_get_sh_offset(class, name_table_shdr); | |
| for (i = 0; i < shnum; i++, shdr += elf_shdr_get_size) { | |
| u64 size = elf_shdr_get_sh_size(class, shdr); | |
| u64 offset = elf_shdr_get_sh_offset(class, shdr); | |
| u32 name = elf_shdr_get_sh_name(class, shdr); | |
| if (strcmp(name_table + name, ".resource_table")) | |
| continue; | |
| table = (struct resource_table *)(elf_data + offset); | |
| /* make sure we have the entire table */ | |
| if (offset + size > fw_size || offset + size < size) { | |
| dev_err(dev, "resource table truncated\n"); | |
| return NULL; | |
| } | |
| /* make sure table has at least the header */ | |
| if (sizeof(struct resource_table) > size) { | |
| dev_err(dev, "header-less resource table\n"); | |
| return NULL; | |
| } | |
| /* we don't support any version beyond the first */ | |
| if (table->ver != 1) { | |
| dev_err(dev, "unsupported fw ver: %d\n", table->ver); | |
| return NULL; | |
| } | |
| /* make sure reserved bytes are zeroes */ | |
| if (table->reserved[0] || table->reserved[1]) { | |
| dev_err(dev, "non zero reserved bytes\n"); | |
| return NULL; | |
| } | |
| /* make sure the offsets array isn't truncated */ | |
| if (struct_size(table, offset, table->num) > size) { | |
| dev_err(dev, "resource table incomplete\n"); | |
| return NULL; | |
| } | |
| return shdr; | |
| } | |
| return NULL; | |
| } | |
| /** | |
| * rproc_elf_load_rsc_table() - load the resource table | |
| * @rproc: the rproc handle | |
| * @fw: the ELF firmware image | |
| * | |
| * This function finds the resource table inside the remote processor's | |
| * firmware, load it into the @cached_table and update @table_ptr. | |
| * | |
| * Return: 0 on success, negative errno on failure. | |
| */ | |
| int rproc_elf_load_rsc_table(struct rproc *rproc, const struct firmware *fw) | |
| { | |
| const void *shdr; | |
| struct device *dev = &rproc->dev; | |
| struct resource_table *table = NULL; | |
| const u8 *elf_data = fw->data; | |
| size_t tablesz; | |
| u8 class = fw_elf_get_class(fw); | |
| u64 sh_offset; | |
| shdr = find_table(dev, fw); | |
| if (!shdr) | |
| return -EINVAL; | |
| sh_offset = elf_shdr_get_sh_offset(class, shdr); | |
| table = (struct resource_table *)(elf_data + sh_offset); | |
| tablesz = elf_shdr_get_sh_size(class, shdr); | |
| /* | |
| * Create a copy of the resource table. When a virtio device starts | |
| * and calls vring_new_virtqueue() the address of the allocated vring | |
| * will be stored in the cached_table. Before the device is started, | |
| * cached_table will be copied into device memory. | |
| */ | |
| rproc->cached_table = kmemdup(table, tablesz, GFP_KERNEL); | |
| if (!rproc->cached_table) | |
| return -ENOMEM; | |
| rproc->table_ptr = rproc->cached_table; | |
| rproc->table_sz = tablesz; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(rproc_elf_load_rsc_table); | |
| /** | |
| * rproc_elf_find_loaded_rsc_table() - find the loaded resource table | |
| * @rproc: the rproc handle | |
| * @fw: the ELF firmware image | |
| * | |
| * This function finds the location of the loaded resource table. Don't | |
| * call this function if the table wasn't loaded yet - it's a bug if you do. | |
| * | |
| * Return: pointer to the resource table if it is found or NULL otherwise. | |
| * If the table wasn't loaded yet the result is unspecified. | |
| */ | |
| struct resource_table *rproc_elf_find_loaded_rsc_table(struct rproc *rproc, | |
| const struct firmware *fw) | |
| { | |
| const void *shdr; | |
| u64 sh_addr, sh_size; | |
| u8 class = fw_elf_get_class(fw); | |
| struct device *dev = &rproc->dev; | |
| shdr = find_table(&rproc->dev, fw); | |
| if (!shdr) | |
| return NULL; | |
| sh_addr = elf_shdr_get_sh_addr(class, shdr); | |
| sh_size = elf_shdr_get_sh_size(class, shdr); | |
| if (!rproc_u64_fit_in_size_t(sh_size)) { | |
| dev_err(dev, "size (%llx) does not fit in size_t type\n", | |
| sh_size); | |
| return NULL; | |
| } | |
| return rproc_da_to_va(rproc, sh_addr, sh_size, NULL); | |
| } | |
| EXPORT_SYMBOL(rproc_elf_find_loaded_rsc_table); |