| // SPDX-License-Identifier: GPL-2.0-only | |
| // Copyright (C) 2025 Andreas Kemnade | |
| /* Datasheet: https://www.ti.com/lit/gpn/tps65185 */ | |
| #include <linux/cleanup.h> | |
| #include <linux/completion.h> | |
| #include <linux/delay.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/i2c.h> | |
| #include <linux/module.h> | |
| #include <linux/mutex.h> | |
| #include <linux/hwmon.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/property.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/regulator/driver.h> | |
| #include <linux/regulator/machine.h> | |
| #include <linux/regmap.h> | |
| #define TPS65185_REG_TMST_VALUE 0 | |
| #define TPS65185_REG_ENABLE 1 | |
| #define TPS65185_REG_VADJ 2 | |
| #define TPS65185_REG_VCOM1 3 | |
| #define TPS65185_REG_VCOM2 4 | |
| #define TPS65185_REG_INT_EN1 5 | |
| #define TPS65185_REG_INT_EN2 6 | |
| #define TPS65185_REG_INT1 7 | |
| #define TPS65185_REG_INT2 8 | |
| #define TPS65185_REG_TMST1 0xd | |
| #define TPS65185_REG_TMST2 0xe | |
| #define TPS65185_REG_PG 0xf | |
| #define TPS65185_REG_REVID 0x10 | |
| #define TPS65185_READ_THERM BIT(7) | |
| #define TPS65185_CONV_END BIT(5) | |
| #define TPS65185_ENABLE_ACTIVE BIT(7) | |
| #define TPS65185_ENABLE_STANDBY BIT(6) | |
| #define PGOOD_TIMEOUT_MSECS 200 | |
| struct tps65185_data { | |
| struct device *dev; | |
| struct regmap *regmap; | |
| struct gpio_desc *pgood_gpio; | |
| struct gpio_desc *pwrup_gpio; | |
| struct gpio_desc *vcom_ctrl_gpio; | |
| struct gpio_desc *wakeup_gpio; | |
| struct completion pgood_completion; | |
| int pgood_irq; | |
| struct completion tmst_completion; | |
| }; | |
| static const struct hwmon_channel_info *tps65185_info[] = { | |
| HWMON_CHANNEL_INFO(chip, HWMON_C_REGISTER_TZ), | |
| HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), | |
| NULL | |
| }; | |
| static int tps65185_hwmon_read(struct device *dev, enum hwmon_sensor_types type, | |
| u32 attr, int channel, long *temp) | |
| { | |
| struct tps65185_data *data = dev_get_drvdata(dev); | |
| unsigned int val; | |
| int ret; | |
| reinit_completion(&data->tmst_completion); | |
| /* start acquisition */ | |
| regmap_update_bits(data->regmap, TPS65185_REG_TMST1, | |
| TPS65185_READ_THERM, TPS65185_READ_THERM); | |
| wait_for_completion_timeout(&data->tmst_completion, | |
| msecs_to_jiffies(PGOOD_TIMEOUT_MSECS)); | |
| ret = regmap_read(data->regmap, TPS65185_REG_TMST1, &val); | |
| if (!(val & TPS65185_CONV_END)) | |
| return -ETIMEDOUT; | |
| ret = regmap_read(data->regmap, TPS65185_REG_TMST_VALUE, &val); | |
| if (ret) | |
| return ret; | |
| *temp = (s8)val * 1000; | |
| return 0; | |
| } | |
| static umode_t tps65185_hwmon_is_visible(const void *data, | |
| enum hwmon_sensor_types type, | |
| u32 attr, int channel) | |
| { | |
| return 0444; | |
| } | |
| static const struct hwmon_ops tps65185_hwmon_ops = { | |
| .is_visible = tps65185_hwmon_is_visible, | |
| .read = tps65185_hwmon_read, | |
| }; | |
| static const struct hwmon_chip_info tps65185_chip_info = { | |
| .ops = &tps65185_hwmon_ops, | |
| .info = tps65185_info, | |
| }; | |
| static bool tps65185_volatile_reg(struct device *dev, unsigned int reg) | |
| { | |
| switch (reg) { | |
| case TPS65185_REG_TMST_VALUE: | |
| case TPS65185_REG_ENABLE: | |
| case TPS65185_REG_VCOM2: | |
| case TPS65185_REG_INT1: | |
| case TPS65185_REG_INT2: | |
| case TPS65185_REG_TMST1: | |
| return true; | |
| default: | |
| return false; | |
| } | |
| } | |
| static const struct regmap_config regmap_config = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| .max_register = 0x10, | |
| .cache_type = REGCACHE_MAPLE, | |
| .volatile_reg = tps65185_volatile_reg, | |
| }; | |
| static const struct regulator_ops tps65185_v3p3ops = { | |
| .list_voltage = regulator_list_voltage_linear, | |
| .enable = regulator_enable_regmap, | |
| .disable = regulator_disable_regmap, | |
| .is_enabled = regulator_is_enabled_regmap, | |
| }; | |
| static int tps65185_check_powergood(struct regulator_dev *rdev) | |
| { | |
| struct tps65185_data *data = rdev_get_drvdata(rdev); | |
| return gpiod_get_value_cansleep(data->pgood_gpio); | |
| } | |
| static int tps65185_vposneg_get_voltage_sel(struct regulator_dev *rdev) | |
| { | |
| int ret; | |
| ret = regulator_get_voltage_sel_regmap(rdev); | |
| if (ret < 0) | |
| return ret; | |
| /* highest value is lowest voltage */ | |
| return 6 - ret; | |
| } | |
| static int tps65185_vposneg_set_voltage_sel(struct regulator_dev *rdev, unsigned int selector) | |
| { | |
| return regulator_set_voltage_sel_regmap(rdev, 6 - selector); | |
| } | |
| static irqreturn_t pgood_handler(int irq, void *dev_id) | |
| { | |
| struct tps65185_data *data = dev_id; | |
| complete(&data->pgood_completion); | |
| return IRQ_HANDLED; | |
| } | |
| static int tps65185_vposneg_enable(struct regulator_dev *rdev) | |
| { | |
| struct tps65185_data *data = rdev_get_drvdata(rdev); | |
| int ret; | |
| reinit_completion(&data->pgood_completion); | |
| if (data->pwrup_gpio) | |
| ret = gpiod_set_value_cansleep(data->pwrup_gpio, 1); | |
| else | |
| ret = regmap_update_bits(data->regmap, TPS65185_REG_ENABLE, | |
| TPS65185_ENABLE_ACTIVE, | |
| TPS65185_ENABLE_ACTIVE); | |
| if (ret) | |
| return ret; | |
| dev_dbg(data->dev, "turning on..."); | |
| wait_for_completion_timeout(&data->pgood_completion, | |
| msecs_to_jiffies(PGOOD_TIMEOUT_MSECS)); | |
| dev_dbg(data->dev, "turned on"); | |
| ret = gpiod_get_value_cansleep(data->pgood_gpio); | |
| if (ret < 0) | |
| return ret; | |
| if (!ret) | |
| return -ETIMEDOUT; | |
| return 0; | |
| } | |
| static int tps65185_vposneg_disable(struct regulator_dev *rdev) | |
| { | |
| struct tps65185_data *data = rdev_get_drvdata(rdev); | |
| int ret; | |
| if (data->pwrup_gpio) | |
| ret = gpiod_set_value_cansleep(data->pwrup_gpio, 0); | |
| else | |
| ret = regmap_update_bits(data->regmap, TPS65185_REG_ENABLE, | |
| TPS65185_ENABLE_STANDBY, | |
| TPS65185_ENABLE_STANDBY); | |
| return ret; | |
| } | |
| static int tps65185_vcom_set_voltage_sel(struct regulator_dev *rdev, unsigned int selector) | |
| { | |
| struct tps65185_data *data = rdev_get_drvdata(rdev); | |
| int ret; | |
| ret = regmap_update_bits(data->regmap, TPS65185_REG_VCOM2, BIT(0), selector >> 8); | |
| if (ret < 0) | |
| return ret; | |
| return regmap_write(data->regmap, TPS65185_REG_VCOM1, selector & 0xFF); | |
| } | |
| static int tps65185_vcom_get_voltage_sel(struct regulator_dev *rdev) | |
| { | |
| struct tps65185_data *data = rdev_get_drvdata(rdev); | |
| int ret; | |
| unsigned int sel, sel2; | |
| ret = regmap_read(data->regmap, TPS65185_REG_VCOM1, &sel); | |
| if (ret < 0) | |
| return ret; | |
| ret = regmap_read(data->regmap, TPS65185_REG_VCOM2, &sel2); | |
| if (ret < 0) | |
| return ret; | |
| if (sel2 & BIT(0)) | |
| sel |= 0x100; | |
| return sel; | |
| } | |
| static const struct regulator_ops tps65185_vcom_ops = { | |
| .list_voltage = regulator_list_voltage_linear, | |
| .map_voltage = regulator_map_voltage_linear, | |
| .set_voltage_sel = tps65185_vcom_set_voltage_sel, | |
| .get_voltage_sel = tps65185_vcom_get_voltage_sel, | |
| }; | |
| static const struct regulator_ops tps65185_vposneg_ops = { | |
| .list_voltage = regulator_list_voltage_linear, | |
| .map_voltage = regulator_map_voltage_linear, | |
| .enable = tps65185_vposneg_enable, | |
| .disable = tps65185_vposneg_disable, | |
| .is_enabled = tps65185_check_powergood, | |
| .set_voltage_sel = tps65185_vposneg_set_voltage_sel, | |
| .get_voltage_sel = tps65185_vposneg_get_voltage_sel, | |
| }; | |
| static const struct regulator_desc regulators[] = { | |
| { | |
| .name = "v3p3", | |
| .of_match = of_match_ptr("v3p3"), | |
| .regulators_node = of_match_ptr("regulators"), | |
| .id = 0, | |
| .ops = &tps65185_v3p3ops, | |
| .type = REGULATOR_VOLTAGE, | |
| .owner = THIS_MODULE, | |
| .enable_reg = TPS65185_REG_ENABLE, | |
| .enable_mask = BIT(5), | |
| .n_voltages = 1, | |
| .min_uV = 3300000, | |
| }, | |
| { | |
| .name = "vposneg", | |
| .of_match = of_match_ptr("vposneg"), | |
| .regulators_node = of_match_ptr("regulators"), | |
| .id = 1, | |
| .ops = &tps65185_vposneg_ops, | |
| .type = REGULATOR_VOLTAGE, | |
| .owner = THIS_MODULE, | |
| .n_voltages = 4, | |
| .vsel_reg = TPS65185_REG_VADJ, | |
| .vsel_mask = 0x7, | |
| .min_uV = 14250000, | |
| .uV_step = 250000, | |
| } | |
| }; | |
| static const struct regulator_desc vcom_regulator_desc = { | |
| .name = "vcom", | |
| .of_match = of_match_ptr("vcom"), | |
| .regulators_node = of_match_ptr("regulators"), | |
| .supply_name = "vposneg", | |
| .id = 2, | |
| .ops = &tps65185_vcom_ops, | |
| .type = REGULATOR_VOLTAGE, | |
| .owner = THIS_MODULE, | |
| .n_voltages = 511, | |
| .min_uV = 0, | |
| .uV_step = 10000, | |
| }; | |
| static irqreturn_t tps65185_irq_thread(int irq, void *dev_id) | |
| { | |
| struct tps65185_data *data = dev_id; | |
| unsigned int int_status_1, int_status_2; | |
| int ret; | |
| /* read both status to have irq cleared */ | |
| ret = regmap_read(data->regmap, TPS65185_REG_INT1, &int_status_1); | |
| if (ret) | |
| return IRQ_NONE; | |
| ret = regmap_read(data->regmap, TPS65185_REG_INT2, &int_status_2); | |
| if (ret) | |
| return IRQ_NONE; | |
| if (int_status_2 & BIT(0)) | |
| complete(&data->tmst_completion); | |
| dev_dbg(data->dev, "irq status %02x %02x\n", int_status_1, int_status_2); | |
| if (int_status_1 || int_status_2) | |
| return IRQ_HANDLED; | |
| return IRQ_NONE; | |
| } | |
| static int tps65185_probe(struct i2c_client *client) | |
| { | |
| struct tps65185_data *data; | |
| struct regulator_config config = { }; | |
| struct regulator_dev *rdev; | |
| int ret = 0; | |
| int i; | |
| data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); | |
| if (!data) | |
| return -ENOMEM; | |
| data->regmap = devm_regmap_init_i2c(client, ®map_config); | |
| if (IS_ERR(data->regmap)) | |
| return dev_err_probe(&client->dev, PTR_ERR(data->regmap), | |
| "failed to allocate regmap!\n"); | |
| data->pgood_gpio = devm_gpiod_get(&client->dev, "pwr-good", GPIOD_IN); | |
| if (IS_ERR(data->pgood_gpio)) | |
| return dev_err_probe(&client->dev, | |
| PTR_ERR(data->pgood_gpio), | |
| "failed to get power good gpio\n"); | |
| data->pgood_irq = gpiod_to_irq(data->pgood_gpio); | |
| if (data->pgood_irq < 0) | |
| return data->pgood_irq; | |
| data->pwrup_gpio = devm_gpiod_get_optional(&client->dev, "enable", GPIOD_OUT_LOW); | |
| if (IS_ERR(data->pwrup_gpio)) | |
| return dev_err_probe(&client->dev, PTR_ERR(data->pwrup_gpio), | |
| "failed to get pwrup gpio\n"); | |
| data->wakeup_gpio = devm_gpiod_get_optional(&client->dev, "wakeup", GPIOD_OUT_HIGH); | |
| if (IS_ERR(data->wakeup_gpio)) | |
| return dev_err_probe(&client->dev, | |
| PTR_ERR(data->wakeup_gpio), | |
| "failed to get wakeup gpio\n"); | |
| data->vcom_ctrl_gpio = devm_gpiod_get_optional(&client->dev, "vcom-ctrl", GPIOD_OUT_LOW); | |
| if (IS_ERR(data->vcom_ctrl_gpio)) | |
| return dev_err_probe(&client->dev, | |
| PTR_ERR(data->vcom_ctrl_gpio), | |
| "failed to get vcm ctrl gpio\n"); | |
| ret = devm_regulator_get_enable(&client->dev, "vin"); | |
| if (ret) | |
| return dev_err_probe(&client->dev, ret, | |
| "failed to get vin regulator\n"); | |
| // TPS65185x PMIC for E Ink Vizplex Enabled Electronic Paper Display Chapter 7.6 Figure 2: | |
| // "Minimum delay time between WAKEUP rising edge and IC ready to accept I2C transaction." | |
| // https://www.ti.com/lit/ds/symlink/tps65185.pdf | |
| usleep_range(1800, 3000); | |
| data->dev = &client->dev; | |
| i2c_set_clientdata(client, data); | |
| init_completion(&data->pgood_completion); | |
| init_completion(&data->tmst_completion); | |
| ret = devm_request_threaded_irq(&client->dev, data->pgood_irq, NULL, | |
| pgood_handler, | |
| IRQF_TRIGGER_RISING | IRQF_ONESHOT, | |
| "PGOOD", data); | |
| if (ret) | |
| return dev_err_probe(&client->dev, ret, | |
| "failed to request power good irq\n"); | |
| if (client->irq) { | |
| ret = devm_request_threaded_irq(&client->dev, client->irq, | |
| NULL, tps65185_irq_thread, | |
| IRQF_TRIGGER_LOW | IRQF_ONESHOT, | |
| "tps65185", data); | |
| if (ret) | |
| return dev_err_probe(&client->dev, ret, | |
| "failed to request irq\n"); | |
| } | |
| ret = regmap_update_bits(data->regmap, TPS65185_REG_INT_EN2, BIT(0), BIT(0)); | |
| if (ret) | |
| return dev_err_probe(&client->dev, ret, | |
| "failed to enable temp irq\n"); | |
| config.driver_data = data; | |
| config.dev = &client->dev; | |
| config.regmap = data->regmap; | |
| for (i = 0; i < ARRAY_SIZE(regulators); i++) { | |
| rdev = devm_regulator_register(&client->dev, ®ulators[i], | |
| &config); | |
| if (IS_ERR(rdev)) | |
| return dev_err_probe(&client->dev, PTR_ERR(rdev), | |
| "failed to register %s regulator\n", | |
| regulators[i].name); | |
| } | |
| config.ena_gpiod = data->vcom_ctrl_gpio; | |
| rdev = devm_regulator_register(&client->dev, &vcom_regulator_desc, &config); | |
| if (IS_ERR(rdev)) | |
| return dev_err_probe(&client->dev, PTR_ERR(rdev), | |
| "failed to register vcom regulator\n"); | |
| if (IS_REACHABLE(CONFIG_HWMON)) { | |
| struct device *hwmon_dev; | |
| hwmon_dev = devm_hwmon_device_register_with_info(&client->dev, "tps65185", data, | |
| &tps65185_chip_info, NULL); | |
| if (IS_ERR(hwmon_dev)) | |
| dev_notice(&client->dev, "failed to register hwmon\n"); | |
| } | |
| return 0; | |
| } | |
| static const struct of_device_id tps65185_dt_ids[] = { | |
| { | |
| .compatible = "ti,tps65185", | |
| }, { | |
| /* sentinel */ | |
| } | |
| }; | |
| MODULE_DEVICE_TABLE(of, tps65185_dt_ids); | |
| static struct i2c_driver tps65185_i2c_driver = { | |
| .driver = { | |
| .name = "tps65185", | |
| .of_match_table = tps65185_dt_ids, | |
| }, | |
| .probe = tps65185_probe, | |
| }; | |
| module_i2c_driver(tps65185_i2c_driver); | |
| /* Module information */ | |
| MODULE_DESCRIPTION("TPS65185 regulator driver"); | |
| MODULE_LICENSE("GPL"); | |