| // SPDX-License-Identifier: GPL-2.0-only | |
| // | |
| // Copyright (c) 2021-2022 Samuel Holland <samuel@sholland.org> | |
| // | |
| #include <linux/mfd/syscon.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_device.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #include <linux/regulator/driver.h> | |
| #define SUN20I_SYS_LDO_CTRL_REG 0x150 | |
| struct sun20i_regulator_data { | |
| const struct regulator_desc *descs; | |
| unsigned int ndescs; | |
| }; | |
| /* regulator_list_voltage_linear() modified for the non-integral uV_step. */ | |
| static int sun20i_d1_system_ldo_list_voltage(struct regulator_dev *rdev, | |
| unsigned int selector) | |
| { | |
| const struct regulator_desc *desc = rdev->desc; | |
| unsigned int fraction, uV; | |
| if (selector >= desc->n_voltages) | |
| return -EINVAL; | |
| uV = desc->min_uV + (desc->uV_step * selector); | |
| fraction = selector + (desc->min_uV % 4); | |
| if (uV > 1606667) | |
| uV += 6667; | |
| else | |
| fraction++; | |
| /* Produce correctly-rounded absolute voltages. */ | |
| return uV + (fraction / 3); | |
| } | |
| static const struct regulator_ops sun20i_d1_system_ldo_ops = { | |
| .list_voltage = sun20i_d1_system_ldo_list_voltage, | |
| .map_voltage = regulator_map_voltage_ascend, | |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
| }; | |
| static const struct regulator_desc sun20i_d1_system_ldo_descs[] = { | |
| { | |
| .name = "ldoa", | |
| .supply_name = "ldo-in", | |
| .of_match = "ldoa", | |
| .ops = &sun20i_d1_system_ldo_ops, | |
| .type = REGULATOR_VOLTAGE, | |
| .owner = THIS_MODULE, | |
| .n_voltages = 32, | |
| .min_uV = 1593333, | |
| .uV_step = 13333, /* repeating */ | |
| .vsel_reg = SUN20I_SYS_LDO_CTRL_REG, | |
| .vsel_mask = GENMASK(7, 0), | |
| }, | |
| { | |
| .name = "ldob", | |
| .supply_name = "ldo-in", | |
| .of_match = "ldob", | |
| .ops = &sun20i_d1_system_ldo_ops, | |
| .type = REGULATOR_VOLTAGE, | |
| .owner = THIS_MODULE, | |
| .n_voltages = 64, | |
| .min_uV = 1166666, | |
| .uV_step = 13333, /* repeating */ | |
| .vsel_reg = SUN20I_SYS_LDO_CTRL_REG, | |
| .vsel_mask = GENMASK(15, 8), | |
| }, | |
| }; | |
| static const struct sun20i_regulator_data sun20i_d1_system_ldos = { | |
| .descs = sun20i_d1_system_ldo_descs, | |
| .ndescs = ARRAY_SIZE(sun20i_d1_system_ldo_descs), | |
| }; | |
| static struct regmap *sun20i_regulator_get_regmap(struct device *dev) | |
| { | |
| struct regmap *regmap; | |
| /* | |
| * First try the syscon interface. The system control device is not | |
| * compatible with "syscon", so fall back to getting the regmap from | |
| * its platform device. This is ugly, but required for devicetree | |
| * backward compatibility. | |
| */ | |
| regmap = syscon_node_to_regmap(dev->parent->of_node); | |
| if (!IS_ERR(regmap)) | |
| return regmap; | |
| regmap = dev_get_regmap(dev->parent, NULL); | |
| if (regmap) | |
| return regmap; | |
| return ERR_PTR(-EPROBE_DEFER); | |
| } | |
| static int sun20i_regulator_probe(struct platform_device *pdev) | |
| { | |
| const struct sun20i_regulator_data *data; | |
| struct device *dev = &pdev->dev; | |
| struct regulator_config config; | |
| struct regmap *regmap; | |
| data = of_device_get_match_data(dev); | |
| if (!data) | |
| return -EINVAL; | |
| regmap = sun20i_regulator_get_regmap(dev); | |
| if (IS_ERR(regmap)) | |
| return dev_err_probe(dev, PTR_ERR(regmap), "Failed to get regmap\n"); | |
| config = (struct regulator_config) { | |
| .dev = dev, | |
| .regmap = regmap, | |
| }; | |
| for (unsigned int i = 0; i < data->ndescs; ++i) { | |
| const struct regulator_desc *desc = &data->descs[i]; | |
| struct regulator_dev *rdev; | |
| rdev = devm_regulator_register(dev, desc, &config); | |
| if (IS_ERR(rdev)) | |
| return PTR_ERR(rdev); | |
| } | |
| return 0; | |
| } | |
| static const struct of_device_id sun20i_regulator_of_match[] = { | |
| { | |
| .compatible = "allwinner,sun20i-d1-system-ldos", | |
| .data = &sun20i_d1_system_ldos, | |
| }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, sun20i_regulator_of_match); | |
| static struct platform_driver sun20i_regulator_driver = { | |
| .probe = sun20i_regulator_probe, | |
| .driver = { | |
| .name = "sun20i-regulator", | |
| .of_match_table = sun20i_regulator_of_match, | |
| }, | |
| }; | |
| module_platform_driver(sun20i_regulator_driver); | |
| MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>"); | |
| MODULE_DESCRIPTION("Allwinner D1 internal LDO driver"); | |
| MODULE_LICENSE("GPL"); |