| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (C) 2022 Raspberry Pi Ltd. | |
| * Copyright (C) 2025 Marek Vasut | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/gpio/driver.h> | |
| #include <linux/gpio/regmap.h> | |
| #include <linux/i2c.h> | |
| #include <linux/module.h> | |
| #include <linux/pwm.h> | |
| #include <linux/regmap.h> | |
| /* I2C registers of the microcontroller. */ | |
| #define REG_ID 0x01 | |
| #define REG_POWERON 0x02 | |
| #define REG_PWM 0x03 | |
| /* Bits for poweron register */ | |
| #define LCD_RESET_BIT BIT(0) | |
| #define CTP_RESET_BIT BIT(1) | |
| /* Bits for the PWM register */ | |
| #define PWM_BL_ENABLE BIT(7) | |
| #define PWM_BL_MASK GENMASK(4, 0) | |
| /* Treat LCD_RESET and CTP_RESET as GPIOs */ | |
| #define NUM_GPIO 2 | |
| static const struct regmap_config rpi_panel_regmap_config = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| .max_register = REG_PWM, | |
| .can_sleep = true, | |
| }; | |
| static int rpi_panel_v2_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm, | |
| const struct pwm_state *state) | |
| { | |
| struct regmap *regmap = pwmchip_get_drvdata(chip); | |
| unsigned int duty; | |
| if (state->polarity != PWM_POLARITY_NORMAL) | |
| return -EINVAL; | |
| if (!state->enabled) | |
| return regmap_write(regmap, REG_PWM, 0); | |
| duty = pwm_get_relative_duty_cycle(state, PWM_BL_MASK); | |
| return regmap_write(regmap, REG_PWM, duty | PWM_BL_ENABLE); | |
| } | |
| static const struct pwm_ops rpi_panel_v2_pwm_ops = { | |
| .apply = rpi_panel_v2_pwm_apply, | |
| }; | |
| /* | |
| * I2C driver interface functions | |
| */ | |
| static int rpi_panel_v2_i2c_probe(struct i2c_client *i2c) | |
| { | |
| struct gpio_regmap_config gconfig = { | |
| .ngpio = NUM_GPIO, | |
| .ngpio_per_reg = NUM_GPIO, | |
| .parent = &i2c->dev, | |
| .reg_set_base = REG_POWERON, | |
| }; | |
| struct regmap *regmap; | |
| struct pwm_chip *pc; | |
| int ret; | |
| pc = devm_pwmchip_alloc(&i2c->dev, 1, 0); | |
| if (IS_ERR(pc)) | |
| return PTR_ERR(pc); | |
| pc->ops = &rpi_panel_v2_pwm_ops; | |
| regmap = devm_regmap_init_i2c(i2c, &rpi_panel_regmap_config); | |
| if (IS_ERR(regmap)) | |
| return dev_err_probe(&i2c->dev, PTR_ERR(regmap), "Failed to allocate regmap\n"); | |
| pwmchip_set_drvdata(pc, regmap); | |
| regmap_write(regmap, REG_POWERON, 0); | |
| gconfig.regmap = regmap; | |
| ret = PTR_ERR_OR_ZERO(devm_gpio_regmap_register(&i2c->dev, &gconfig)); | |
| if (ret) | |
| return dev_err_probe(&i2c->dev, ret, "Failed to create gpiochip\n"); | |
| i2c_set_clientdata(i2c, regmap); | |
| return devm_pwmchip_add(&i2c->dev, pc); | |
| } | |
| static void rpi_panel_v2_i2c_shutdown(struct i2c_client *client) | |
| { | |
| struct regmap *regmap = i2c_get_clientdata(client); | |
| regmap_write(regmap, REG_PWM, 0); | |
| regmap_write(regmap, REG_POWERON, 0); | |
| } | |
| static const struct of_device_id rpi_panel_v2_dt_ids[] = { | |
| { .compatible = "raspberrypi,touchscreen-panel-regulator-v2" }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, rpi_panel_v2_dt_ids); | |
| static struct i2c_driver rpi_panel_v2_regulator_driver = { | |
| .driver = { | |
| .name = "rpi_touchscreen_v2", | |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, | |
| .of_match_table = rpi_panel_v2_dt_ids, | |
| }, | |
| .probe = rpi_panel_v2_i2c_probe, | |
| .shutdown = rpi_panel_v2_i2c_shutdown, | |
| }; | |
| module_i2c_driver(rpi_panel_v2_regulator_driver); | |
| MODULE_AUTHOR("Dave Stevenson <dave.stevenson@raspberrypi.com>"); | |
| MODULE_DESCRIPTION("Regulator device driver for Raspberry Pi 7-inch V2 touchscreen"); | |
| MODULE_LICENSE("GPL"); |