| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * act8865-regulator.c - Voltage regulation for active-semi ACT88xx PMUs | |
| * | |
| * http://www.active-semi.com/products/power-management-units/act88xx/ | |
| * | |
| * Copyright (C) 2013 Atmel Corporation | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/i2c.h> | |
| #include <linux/err.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regulator/driver.h> | |
| #include <linux/regulator/act8865.h> | |
| #include <linux/of.h> | |
| #include <linux/of_device.h> | |
| #include <linux/power_supply.h> | |
| #include <linux/regulator/of_regulator.h> | |
| #include <linux/regmap.h> | |
| #include <dt-bindings/regulator/active-semi,8865-regulator.h> | |
| /* | |
| * ACT8600 Global Register Map. | |
| */ | |
| #define ACT8600_SYS_MODE 0x00 | |
| #define ACT8600_SYS_CTRL 0x01 | |
| #define ACT8600_DCDC1_VSET 0x10 | |
| #define ACT8600_DCDC1_CTRL 0x12 | |
| #define ACT8600_DCDC2_VSET 0x20 | |
| #define ACT8600_DCDC2_CTRL 0x22 | |
| #define ACT8600_DCDC3_VSET 0x30 | |
| #define ACT8600_DCDC3_CTRL 0x32 | |
| #define ACT8600_SUDCDC4_VSET 0x40 | |
| #define ACT8600_SUDCDC4_CTRL 0x41 | |
| #define ACT8600_LDO5_VSET 0x50 | |
| #define ACT8600_LDO5_CTRL 0x51 | |
| #define ACT8600_LDO6_VSET 0x60 | |
| #define ACT8600_LDO6_CTRL 0x61 | |
| #define ACT8600_LDO7_VSET 0x70 | |
| #define ACT8600_LDO7_CTRL 0x71 | |
| #define ACT8600_LDO8_VSET 0x80 | |
| #define ACT8600_LDO8_CTRL 0x81 | |
| #define ACT8600_LDO910_CTRL 0x91 | |
| #define ACT8600_APCH0 0xA1 | |
| #define ACT8600_APCH1 0xA8 | |
| #define ACT8600_APCH2 0xA9 | |
| #define ACT8600_APCH_STAT 0xAA | |
| #define ACT8600_OTG0 0xB0 | |
| #define ACT8600_OTG1 0xB2 | |
| /* | |
| * ACT8846 Global Register Map. | |
| */ | |
| #define ACT8846_SYS0 0x00 | |
| #define ACT8846_SYS1 0x01 | |
| #define ACT8846_REG1_VSET 0x10 | |
| #define ACT8846_REG1_CTRL 0x12 | |
| #define ACT8846_REG2_VSET0 0x20 | |
| #define ACT8846_REG2_VSET1 0x21 | |
| #define ACT8846_REG2_CTRL 0x22 | |
| #define ACT8846_REG3_VSET0 0x30 | |
| #define ACT8846_REG3_VSET1 0x31 | |
| #define ACT8846_REG3_CTRL 0x32 | |
| #define ACT8846_REG4_VSET0 0x40 | |
| #define ACT8846_REG4_VSET1 0x41 | |
| #define ACT8846_REG4_CTRL 0x42 | |
| #define ACT8846_REG5_VSET 0x50 | |
| #define ACT8846_REG5_CTRL 0x51 | |
| #define ACT8846_REG6_VSET 0x58 | |
| #define ACT8846_REG6_CTRL 0x59 | |
| #define ACT8846_REG7_VSET 0x60 | |
| #define ACT8846_REG7_CTRL 0x61 | |
| #define ACT8846_REG8_VSET 0x68 | |
| #define ACT8846_REG8_CTRL 0x69 | |
| #define ACT8846_REG9_VSET 0x70 | |
| #define ACT8846_REG9_CTRL 0x71 | |
| #define ACT8846_REG10_VSET 0x80 | |
| #define ACT8846_REG10_CTRL 0x81 | |
| #define ACT8846_REG11_VSET 0x90 | |
| #define ACT8846_REG11_CTRL 0x91 | |
| #define ACT8846_REG12_VSET 0xa0 | |
| #define ACT8846_REG12_CTRL 0xa1 | |
| #define ACT8846_REG13_CTRL 0xb1 | |
| #define ACT8846_GLB_OFF_CTRL 0xc3 | |
| #define ACT8846_OFF_SYSMASK 0x18 | |
| /* | |
| * ACT8865 Global Register Map. | |
| */ | |
| #define ACT8865_SYS_MODE 0x00 | |
| #define ACT8865_SYS_CTRL 0x01 | |
| #define ACT8865_SYS_UNLK_REGS 0x0b | |
| #define ACT8865_DCDC1_VSET1 0x20 | |
| #define ACT8865_DCDC1_VSET2 0x21 | |
| #define ACT8865_DCDC1_CTRL 0x22 | |
| #define ACT8865_DCDC1_SUS 0x24 | |
| #define ACT8865_DCDC2_VSET1 0x30 | |
| #define ACT8865_DCDC2_VSET2 0x31 | |
| #define ACT8865_DCDC2_CTRL 0x32 | |
| #define ACT8865_DCDC2_SUS 0x34 | |
| #define ACT8865_DCDC3_VSET1 0x40 | |
| #define ACT8865_DCDC3_VSET2 0x41 | |
| #define ACT8865_DCDC3_CTRL 0x42 | |
| #define ACT8865_DCDC3_SUS 0x44 | |
| #define ACT8865_LDO1_VSET 0x50 | |
| #define ACT8865_LDO1_CTRL 0x51 | |
| #define ACT8865_LDO1_SUS 0x52 | |
| #define ACT8865_LDO2_VSET 0x54 | |
| #define ACT8865_LDO2_CTRL 0x55 | |
| #define ACT8865_LDO2_SUS 0x56 | |
| #define ACT8865_LDO3_VSET 0x60 | |
| #define ACT8865_LDO3_CTRL 0x61 | |
| #define ACT8865_LDO3_SUS 0x62 | |
| #define ACT8865_LDO4_VSET 0x64 | |
| #define ACT8865_LDO4_CTRL 0x65 | |
| #define ACT8865_LDO4_SUS 0x66 | |
| #define ACT8865_MSTROFF 0x20 | |
| /* | |
| * Field Definitions. | |
| */ | |
| #define ACT8865_ENA 0x80 /* ON - [7] */ | |
| #define ACT8865_DIS 0x40 /* DIS - [6] */ | |
| #define ACT8865_VSEL_MASK 0x3F /* VSET - [5:0] */ | |
| #define ACT8600_LDO10_ENA 0x40 /* ON - [6] */ | |
| #define ACT8600_SUDCDC_VSEL_MASK 0xFF /* SUDCDC VSET - [7:0] */ | |
| #define ACT8600_APCH_CHG_ACIN BIT(7) | |
| #define ACT8600_APCH_CHG_USB BIT(6) | |
| #define ACT8600_APCH_CSTATE0 BIT(5) | |
| #define ACT8600_APCH_CSTATE1 BIT(4) | |
| /* | |
| * ACT8865 voltage number | |
| */ | |
| #define ACT8865_VOLTAGE_NUM 64 | |
| #define ACT8600_SUDCDC_VOLTAGE_NUM 256 | |
| struct act8865 { | |
| struct regmap *regmap; | |
| int off_reg; | |
| int off_mask; | |
| }; | |
| static const struct regmap_range act8600_reg_ranges[] = { | |
| regmap_reg_range(0x00, 0x01), | |
| regmap_reg_range(0x10, 0x10), | |
| regmap_reg_range(0x12, 0x12), | |
| regmap_reg_range(0x20, 0x20), | |
| regmap_reg_range(0x22, 0x22), | |
| regmap_reg_range(0x30, 0x30), | |
| regmap_reg_range(0x32, 0x32), | |
| regmap_reg_range(0x40, 0x41), | |
| regmap_reg_range(0x50, 0x51), | |
| regmap_reg_range(0x60, 0x61), | |
| regmap_reg_range(0x70, 0x71), | |
| regmap_reg_range(0x80, 0x81), | |
| regmap_reg_range(0x91, 0x91), | |
| regmap_reg_range(0xA1, 0xA1), | |
| regmap_reg_range(0xA8, 0xAA), | |
| regmap_reg_range(0xB0, 0xB0), | |
| regmap_reg_range(0xB2, 0xB2), | |
| regmap_reg_range(0xC1, 0xC1), | |
| }; | |
| static const struct regmap_range act8600_reg_ro_ranges[] = { | |
| regmap_reg_range(0xAA, 0xAA), | |
| regmap_reg_range(0xC1, 0xC1), | |
| }; | |
| static const struct regmap_range act8600_reg_volatile_ranges[] = { | |
| regmap_reg_range(0x00, 0x01), | |
| regmap_reg_range(0x12, 0x12), | |
| regmap_reg_range(0x22, 0x22), | |
| regmap_reg_range(0x32, 0x32), | |
| regmap_reg_range(0x41, 0x41), | |
| regmap_reg_range(0x51, 0x51), | |
| regmap_reg_range(0x61, 0x61), | |
| regmap_reg_range(0x71, 0x71), | |
| regmap_reg_range(0x81, 0x81), | |
| regmap_reg_range(0xA8, 0xA8), | |
| regmap_reg_range(0xAA, 0xAA), | |
| regmap_reg_range(0xB0, 0xB0), | |
| regmap_reg_range(0xC1, 0xC1), | |
| }; | |
| static const struct regmap_access_table act8600_write_ranges_table = { | |
| .yes_ranges = act8600_reg_ranges, | |
| .n_yes_ranges = ARRAY_SIZE(act8600_reg_ranges), | |
| .no_ranges = act8600_reg_ro_ranges, | |
| .n_no_ranges = ARRAY_SIZE(act8600_reg_ro_ranges), | |
| }; | |
| static const struct regmap_access_table act8600_read_ranges_table = { | |
| .yes_ranges = act8600_reg_ranges, | |
| .n_yes_ranges = ARRAY_SIZE(act8600_reg_ranges), | |
| }; | |
| static const struct regmap_access_table act8600_volatile_ranges_table = { | |
| .yes_ranges = act8600_reg_volatile_ranges, | |
| .n_yes_ranges = ARRAY_SIZE(act8600_reg_volatile_ranges), | |
| }; | |
| static const struct regmap_config act8600_regmap_config = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| .max_register = 0xFF, | |
| .wr_table = &act8600_write_ranges_table, | |
| .rd_table = &act8600_read_ranges_table, | |
| .volatile_table = &act8600_volatile_ranges_table, | |
| }; | |
| static const struct regmap_config act8865_regmap_config = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| }; | |
| static const struct linear_range act8865_voltage_ranges[] = { | |
| REGULATOR_LINEAR_RANGE(600000, 0, 23, 25000), | |
| REGULATOR_LINEAR_RANGE(1200000, 24, 47, 50000), | |
| REGULATOR_LINEAR_RANGE(2400000, 48, 63, 100000), | |
| }; | |
| static const struct linear_range act8600_sudcdc_voltage_ranges[] = { | |
| REGULATOR_LINEAR_RANGE(3000000, 0, 63, 0), | |
| REGULATOR_LINEAR_RANGE(3000000, 64, 159, 100000), | |
| REGULATOR_LINEAR_RANGE(12600000, 160, 191, 200000), | |
| REGULATOR_LINEAR_RANGE(19000000, 192, 247, 400000), | |
| REGULATOR_LINEAR_RANGE(41400000, 248, 255, 0), | |
| }; | |
| static int act8865_set_suspend_state(struct regulator_dev *rdev, bool enable) | |
| { | |
| struct regmap *regmap = rdev->regmap; | |
| int id = rdev->desc->id, reg, val; | |
| switch (id) { | |
| case ACT8865_ID_DCDC1: | |
| reg = ACT8865_DCDC1_SUS; | |
| val = 0xa8; | |
| break; | |
| case ACT8865_ID_DCDC2: | |
| reg = ACT8865_DCDC2_SUS; | |
| val = 0xa8; | |
| break; | |
| case ACT8865_ID_DCDC3: | |
| reg = ACT8865_DCDC3_SUS; | |
| val = 0xa8; | |
| break; | |
| case ACT8865_ID_LDO1: | |
| reg = ACT8865_LDO1_SUS; | |
| val = 0xe8; | |
| break; | |
| case ACT8865_ID_LDO2: | |
| reg = ACT8865_LDO2_SUS; | |
| val = 0xe8; | |
| break; | |
| case ACT8865_ID_LDO3: | |
| reg = ACT8865_LDO3_SUS; | |
| val = 0xe8; | |
| break; | |
| case ACT8865_ID_LDO4: | |
| reg = ACT8865_LDO4_SUS; | |
| val = 0xe8; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| if (enable) | |
| val |= BIT(4); | |
| /* | |
| * Ask the PMIC to enable/disable this output when entering hibernate | |
| * mode. | |
| */ | |
| return regmap_write(regmap, reg, val); | |
| } | |
| static int act8865_set_suspend_enable(struct regulator_dev *rdev) | |
| { | |
| return act8865_set_suspend_state(rdev, true); | |
| } | |
| static int act8865_set_suspend_disable(struct regulator_dev *rdev) | |
| { | |
| return act8865_set_suspend_state(rdev, false); | |
| } | |
| static unsigned int act8865_of_map_mode(unsigned int mode) | |
| { | |
| switch (mode) { | |
| case ACT8865_REGULATOR_MODE_FIXED: | |
| return REGULATOR_MODE_FAST; | |
| case ACT8865_REGULATOR_MODE_NORMAL: | |
| return REGULATOR_MODE_NORMAL; | |
| case ACT8865_REGULATOR_MODE_LOWPOWER: | |
| return REGULATOR_MODE_STANDBY; | |
| default: | |
| return REGULATOR_MODE_INVALID; | |
| } | |
| } | |
| static int act8865_set_mode(struct regulator_dev *rdev, unsigned int mode) | |
| { | |
| struct regmap *regmap = rdev->regmap; | |
| int id = rdev_get_id(rdev); | |
| int reg, val = 0; | |
| switch (id) { | |
| case ACT8865_ID_DCDC1: | |
| reg = ACT8865_DCDC1_CTRL; | |
| break; | |
| case ACT8865_ID_DCDC2: | |
| reg = ACT8865_DCDC2_CTRL; | |
| break; | |
| case ACT8865_ID_DCDC3: | |
| reg = ACT8865_DCDC3_CTRL; | |
| break; | |
| case ACT8865_ID_LDO1: | |
| reg = ACT8865_LDO1_CTRL; | |
| break; | |
| case ACT8865_ID_LDO2: | |
| reg = ACT8865_LDO2_CTRL; | |
| break; | |
| case ACT8865_ID_LDO3: | |
| reg = ACT8865_LDO3_CTRL; | |
| break; | |
| case ACT8865_ID_LDO4: | |
| reg = ACT8865_LDO4_CTRL; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| switch (mode) { | |
| case REGULATOR_MODE_FAST: | |
| case REGULATOR_MODE_NORMAL: | |
| if (id <= ACT8865_ID_DCDC3) | |
| val = BIT(5); | |
| break; | |
| case REGULATOR_MODE_STANDBY: | |
| if (id > ACT8865_ID_DCDC3) | |
| val = BIT(5); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return regmap_update_bits(regmap, reg, BIT(5), val); | |
| } | |
| static unsigned int act8865_get_mode(struct regulator_dev *rdev) | |
| { | |
| struct regmap *regmap = rdev->regmap; | |
| int id = rdev_get_id(rdev); | |
| int reg, ret, val = 0; | |
| switch (id) { | |
| case ACT8865_ID_DCDC1: | |
| reg = ACT8865_DCDC1_CTRL; | |
| break; | |
| case ACT8865_ID_DCDC2: | |
| reg = ACT8865_DCDC2_CTRL; | |
| break; | |
| case ACT8865_ID_DCDC3: | |
| reg = ACT8865_DCDC3_CTRL; | |
| break; | |
| case ACT8865_ID_LDO1: | |
| reg = ACT8865_LDO1_CTRL; | |
| break; | |
| case ACT8865_ID_LDO2: | |
| reg = ACT8865_LDO2_CTRL; | |
| break; | |
| case ACT8865_ID_LDO3: | |
| reg = ACT8865_LDO3_CTRL; | |
| break; | |
| case ACT8865_ID_LDO4: | |
| reg = ACT8865_LDO4_CTRL; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| ret = regmap_read(regmap, reg, &val); | |
| if (ret) | |
| return ret; | |
| if (id <= ACT8865_ID_DCDC3 && (val & BIT(5))) | |
| return REGULATOR_MODE_FAST; | |
| else if (id > ACT8865_ID_DCDC3 && !(val & BIT(5))) | |
| return REGULATOR_MODE_NORMAL; | |
| else | |
| return REGULATOR_MODE_STANDBY; | |
| } | |
| static const struct regulator_ops act8865_ops = { | |
| .list_voltage = regulator_list_voltage_linear_range, | |
| .map_voltage = regulator_map_voltage_linear_range, | |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
| .enable = regulator_enable_regmap, | |
| .disable = regulator_disable_regmap, | |
| .set_mode = act8865_set_mode, | |
| .get_mode = act8865_get_mode, | |
| .is_enabled = regulator_is_enabled_regmap, | |
| .set_suspend_enable = act8865_set_suspend_enable, | |
| .set_suspend_disable = act8865_set_suspend_disable, | |
| }; | |
| static const struct regulator_ops act8865_ldo_ops = { | |
| .list_voltage = regulator_list_voltage_linear_range, | |
| .map_voltage = regulator_map_voltage_linear_range, | |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, | |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, | |
| .enable = regulator_enable_regmap, | |
| .disable = regulator_disable_regmap, | |
| .set_mode = act8865_set_mode, | |
| .get_mode = act8865_get_mode, | |
| .is_enabled = regulator_is_enabled_regmap, | |
| .set_suspend_enable = act8865_set_suspend_enable, | |
| .set_suspend_disable = act8865_set_suspend_disable, | |
| .set_pull_down = regulator_set_pull_down_regmap, | |
| }; | |
| static const struct regulator_ops act8865_fixed_ldo_ops = { | |
| .enable = regulator_enable_regmap, | |
| .disable = regulator_disable_regmap, | |
| .is_enabled = regulator_is_enabled_regmap, | |
| }; | |
| #define ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, _ops) \ | |
| [_family##_ID_##_id] = { \ | |
| .name = _name, \ | |
| .of_match = of_match_ptr(_name), \ | |
| .of_map_mode = act8865_of_map_mode, \ | |
| .regulators_node = of_match_ptr("regulators"), \ | |
| .supply_name = _supply, \ | |
| .id = _family##_ID_##_id, \ | |
| .type = REGULATOR_VOLTAGE, \ | |
| .ops = _ops, \ | |
| .n_voltages = ACT8865_VOLTAGE_NUM, \ | |
| .linear_ranges = act8865_voltage_ranges, \ | |
| .n_linear_ranges = ARRAY_SIZE(act8865_voltage_ranges), \ | |
| .vsel_reg = _family##_##_id##_##_vsel_reg, \ | |
| .vsel_mask = ACT8865_VSEL_MASK, \ | |
| .enable_reg = _family##_##_id##_CTRL, \ | |
| .enable_mask = ACT8865_ENA, \ | |
| .pull_down_reg = _family##_##_id##_CTRL, \ | |
| .pull_down_mask = ACT8865_DIS, \ | |
| .owner = THIS_MODULE, \ | |
| } | |
| #define ACT88xx_REG(_name, _family, _id, _vsel_reg, _supply) \ | |
| ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, &act8865_ops) | |
| #define ACT88xx_LDO(_name, _family, _id, _vsel_reg, _supply) \ | |
| ACT88xx_REG_(_name, _family, _id, _vsel_reg, _supply, &act8865_ldo_ops) | |
| static const struct regulator_desc act8600_regulators[] = { | |
| ACT88xx_REG("DCDC1", ACT8600, DCDC1, VSET, "vp1"), | |
| ACT88xx_REG("DCDC2", ACT8600, DCDC2, VSET, "vp2"), | |
| ACT88xx_REG("DCDC3", ACT8600, DCDC3, VSET, "vp3"), | |
| { | |
| .name = "SUDCDC_REG4", | |
| .of_match = of_match_ptr("SUDCDC_REG4"), | |
| .regulators_node = of_match_ptr("regulators"), | |
| .id = ACT8600_ID_SUDCDC4, | |
| .ops = &act8865_ops, | |
| .type = REGULATOR_VOLTAGE, | |
| .n_voltages = ACT8600_SUDCDC_VOLTAGE_NUM, | |
| .linear_ranges = act8600_sudcdc_voltage_ranges, | |
| .n_linear_ranges = ARRAY_SIZE(act8600_sudcdc_voltage_ranges), | |
| .vsel_reg = ACT8600_SUDCDC4_VSET, | |
| .vsel_mask = ACT8600_SUDCDC_VSEL_MASK, | |
| .enable_reg = ACT8600_SUDCDC4_CTRL, | |
| .enable_mask = ACT8865_ENA, | |
| .owner = THIS_MODULE, | |
| }, | |
| ACT88xx_REG("LDO5", ACT8600, LDO5, VSET, "inl"), | |
| ACT88xx_REG("LDO6", ACT8600, LDO6, VSET, "inl"), | |
| ACT88xx_REG("LDO7", ACT8600, LDO7, VSET, "inl"), | |
| ACT88xx_REG("LDO8", ACT8600, LDO8, VSET, "inl"), | |
| { | |
| .name = "LDO_REG9", | |
| .of_match = of_match_ptr("LDO_REG9"), | |
| .regulators_node = of_match_ptr("regulators"), | |
| .id = ACT8600_ID_LDO9, | |
| .ops = &act8865_fixed_ldo_ops, | |
| .type = REGULATOR_VOLTAGE, | |
| .n_voltages = 1, | |
| .fixed_uV = 3300000, | |
| .enable_reg = ACT8600_LDO910_CTRL, | |
| .enable_mask = ACT8865_ENA, | |
| .owner = THIS_MODULE, | |
| }, | |
| { | |
| .name = "LDO_REG10", | |
| .of_match = of_match_ptr("LDO_REG10"), | |
| .regulators_node = of_match_ptr("regulators"), | |
| .id = ACT8600_ID_LDO10, | |
| .ops = &act8865_fixed_ldo_ops, | |
| .type = REGULATOR_VOLTAGE, | |
| .n_voltages = 1, | |
| .fixed_uV = 1200000, | |
| .enable_reg = ACT8600_LDO910_CTRL, | |
| .enable_mask = ACT8600_LDO10_ENA, | |
| .owner = THIS_MODULE, | |
| }, | |
| }; | |
| static const struct regulator_desc act8846_regulators[] = { | |
| ACT88xx_REG("REG1", ACT8846, REG1, VSET, "vp1"), | |
| ACT88xx_REG("REG2", ACT8846, REG2, VSET0, "vp2"), | |
| ACT88xx_REG("REG3", ACT8846, REG3, VSET0, "vp3"), | |
| ACT88xx_REG("REG4", ACT8846, REG4, VSET0, "vp4"), | |
| ACT88xx_REG("REG5", ACT8846, REG5, VSET, "inl1"), | |
| ACT88xx_REG("REG6", ACT8846, REG6, VSET, "inl1"), | |
| ACT88xx_REG("REG7", ACT8846, REG7, VSET, "inl1"), | |
| ACT88xx_REG("REG8", ACT8846, REG8, VSET, "inl2"), | |
| ACT88xx_REG("REG9", ACT8846, REG9, VSET, "inl2"), | |
| ACT88xx_REG("REG10", ACT8846, REG10, VSET, "inl3"), | |
| ACT88xx_REG("REG11", ACT8846, REG11, VSET, "inl3"), | |
| ACT88xx_REG("REG12", ACT8846, REG12, VSET, "inl3"), | |
| }; | |
| static const struct regulator_desc act8865_regulators[] = { | |
| ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET1, "vp1"), | |
| ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET1, "vp2"), | |
| ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET1, "vp3"), | |
| ACT88xx_LDO("LDO_REG1", ACT8865, LDO1, VSET, "inl45"), | |
| ACT88xx_LDO("LDO_REG2", ACT8865, LDO2, VSET, "inl45"), | |
| ACT88xx_LDO("LDO_REG3", ACT8865, LDO3, VSET, "inl67"), | |
| ACT88xx_LDO("LDO_REG4", ACT8865, LDO4, VSET, "inl67"), | |
| }; | |
| static const struct regulator_desc act8865_alt_regulators[] = { | |
| ACT88xx_REG("DCDC_REG1", ACT8865, DCDC1, VSET2, "vp1"), | |
| ACT88xx_REG("DCDC_REG2", ACT8865, DCDC2, VSET2, "vp2"), | |
| ACT88xx_REG("DCDC_REG3", ACT8865, DCDC3, VSET2, "vp3"), | |
| ACT88xx_LDO("LDO_REG1", ACT8865, LDO1, VSET, "inl45"), | |
| ACT88xx_LDO("LDO_REG2", ACT8865, LDO2, VSET, "inl45"), | |
| ACT88xx_LDO("LDO_REG3", ACT8865, LDO3, VSET, "inl67"), | |
| ACT88xx_LDO("LDO_REG4", ACT8865, LDO4, VSET, "inl67"), | |
| }; | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id act8865_dt_ids[] = { | |
| { .compatible = "active-semi,act8600", .data = (void *)ACT8600 }, | |
| { .compatible = "active-semi,act8846", .data = (void *)ACT8846 }, | |
| { .compatible = "active-semi,act8865", .data = (void *)ACT8865 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, act8865_dt_ids); | |
| #endif | |
| static struct act8865_regulator_data *act8865_get_regulator_data( | |
| int id, struct act8865_platform_data *pdata) | |
| { | |
| int i; | |
| for (i = 0; i < pdata->num_regulators; i++) { | |
| if (pdata->regulators[i].id == id) | |
| return &pdata->regulators[i]; | |
| } | |
| return NULL; | |
| } | |
| static struct i2c_client *act8865_i2c_client; | |
| static void act8865_power_off(void) | |
| { | |
| struct act8865 *act8865; | |
| act8865 = i2c_get_clientdata(act8865_i2c_client); | |
| regmap_write(act8865->regmap, act8865->off_reg, act8865->off_mask); | |
| while (1); | |
| } | |
| static int act8600_charger_get_status(struct regmap *map) | |
| { | |
| unsigned int val; | |
| int ret; | |
| u8 state0, state1; | |
| ret = regmap_read(map, ACT8600_APCH_STAT, &val); | |
| if (ret < 0) | |
| return ret; | |
| state0 = val & ACT8600_APCH_CSTATE0; | |
| state1 = val & ACT8600_APCH_CSTATE1; | |
| if (state0 && !state1) | |
| return POWER_SUPPLY_STATUS_CHARGING; | |
| if (!state0 && state1) | |
| return POWER_SUPPLY_STATUS_NOT_CHARGING; | |
| if (!state0 && !state1) | |
| return POWER_SUPPLY_STATUS_DISCHARGING; | |
| return POWER_SUPPLY_STATUS_UNKNOWN; | |
| } | |
| static int act8600_charger_get_property(struct power_supply *psy, | |
| enum power_supply_property psp, union power_supply_propval *val) | |
| { | |
| struct regmap *map = power_supply_get_drvdata(psy); | |
| int ret; | |
| switch (psp) { | |
| case POWER_SUPPLY_PROP_STATUS: | |
| ret = act8600_charger_get_status(map); | |
| if (ret < 0) | |
| return ret; | |
| val->intval = ret; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static enum power_supply_property act8600_charger_properties[] = { | |
| POWER_SUPPLY_PROP_STATUS, | |
| }; | |
| static const struct power_supply_desc act8600_charger_desc = { | |
| .name = "act8600-charger", | |
| .type = POWER_SUPPLY_TYPE_BATTERY, | |
| .properties = act8600_charger_properties, | |
| .num_properties = ARRAY_SIZE(act8600_charger_properties), | |
| .get_property = act8600_charger_get_property, | |
| }; | |
| static int act8600_charger_probe(struct device *dev, struct regmap *regmap) | |
| { | |
| struct power_supply *charger; | |
| struct power_supply_config cfg = { | |
| .drv_data = regmap, | |
| .fwnode = dev_fwnode(dev), | |
| }; | |
| charger = devm_power_supply_register(dev, &act8600_charger_desc, &cfg); | |
| return PTR_ERR_OR_ZERO(charger); | |
| } | |
| static int act8865_pmic_probe(struct i2c_client *client) | |
| { | |
| const struct i2c_device_id *i2c_id = i2c_client_get_device_id(client); | |
| const struct regulator_desc *regulators; | |
| struct act8865_platform_data *pdata = NULL; | |
| struct device *dev = &client->dev; | |
| int i, ret, num_regulators; | |
| struct act8865 *act8865; | |
| const struct regmap_config *regmap_config; | |
| unsigned long type; | |
| int off_reg, off_mask; | |
| int voltage_select = 0; | |
| if (dev->of_node) { | |
| const struct of_device_id *id; | |
| id = of_match_device(of_match_ptr(act8865_dt_ids), dev); | |
| if (!id) | |
| return -ENODEV; | |
| type = (unsigned long) id->data; | |
| voltage_select = of_property_read_bool(dev->of_node, "active-semi,vsel-high"); | |
| } else { | |
| type = i2c_id->driver_data; | |
| pdata = dev_get_platdata(dev); | |
| } | |
| switch (type) { | |
| case ACT8600: | |
| regulators = act8600_regulators; | |
| num_regulators = ARRAY_SIZE(act8600_regulators); | |
| regmap_config = &act8600_regmap_config; | |
| off_reg = -1; | |
| off_mask = -1; | |
| break; | |
| case ACT8846: | |
| regulators = act8846_regulators; | |
| num_regulators = ARRAY_SIZE(act8846_regulators); | |
| regmap_config = &act8865_regmap_config; | |
| off_reg = ACT8846_GLB_OFF_CTRL; | |
| off_mask = ACT8846_OFF_SYSMASK; | |
| break; | |
| case ACT8865: | |
| if (voltage_select) { | |
| regulators = act8865_alt_regulators; | |
| num_regulators = ARRAY_SIZE(act8865_alt_regulators); | |
| } else { | |
| regulators = act8865_regulators; | |
| num_regulators = ARRAY_SIZE(act8865_regulators); | |
| } | |
| regmap_config = &act8865_regmap_config; | |
| off_reg = ACT8865_SYS_CTRL; | |
| off_mask = ACT8865_MSTROFF; | |
| break; | |
| default: | |
| dev_err(dev, "invalid device id %lu\n", type); | |
| return -EINVAL; | |
| } | |
| act8865 = devm_kzalloc(dev, sizeof(struct act8865), GFP_KERNEL); | |
| if (!act8865) | |
| return -ENOMEM; | |
| act8865->regmap = devm_regmap_init_i2c(client, regmap_config); | |
| if (IS_ERR(act8865->regmap)) { | |
| ret = PTR_ERR(act8865->regmap); | |
| dev_err(dev, "Failed to allocate register map: %d\n", ret); | |
| return ret; | |
| } | |
| if (of_device_is_system_power_controller(dev->of_node)) { | |
| if (!pm_power_off && (off_reg > 0)) { | |
| act8865_i2c_client = client; | |
| act8865->off_reg = off_reg; | |
| act8865->off_mask = off_mask; | |
| pm_power_off = act8865_power_off; | |
| } else { | |
| dev_err(dev, "Failed to set poweroff capability, already defined\n"); | |
| } | |
| } | |
| /* Finally register devices */ | |
| for (i = 0; i < num_regulators; i++) { | |
| const struct regulator_desc *desc = ®ulators[i]; | |
| struct regulator_config config = { }; | |
| struct regulator_dev *rdev; | |
| config.dev = dev; | |
| config.driver_data = act8865; | |
| config.regmap = act8865->regmap; | |
| if (pdata) { | |
| struct act8865_regulator_data *rdata; | |
| rdata = act8865_get_regulator_data(desc->id, pdata); | |
| if (rdata) { | |
| config.init_data = rdata->init_data; | |
| config.of_node = rdata->of_node; | |
| } | |
| } | |
| rdev = devm_regulator_register(dev, desc, &config); | |
| if (IS_ERR(rdev)) { | |
| dev_err(dev, "failed to register %s\n", desc->name); | |
| return PTR_ERR(rdev); | |
| } | |
| } | |
| if (type == ACT8600) { | |
| ret = act8600_charger_probe(dev, act8865->regmap); | |
| if (ret < 0) { | |
| if (ret != -EPROBE_DEFER) | |
| dev_err(dev, "Failed to probe charger"); | |
| return ret; | |
| } | |
| } | |
| i2c_set_clientdata(client, act8865); | |
| /* Unlock expert registers for ACT8865. */ | |
| return type != ACT8865 ? 0 : regmap_write(act8865->regmap, | |
| ACT8865_SYS_UNLK_REGS, 0xef); | |
| } | |
| static const struct i2c_device_id act8865_ids[] = { | |
| { .name = "act8600", .driver_data = ACT8600 }, | |
| { .name = "act8846", .driver_data = ACT8846 }, | |
| { .name = "act8865", .driver_data = ACT8865 }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, act8865_ids); | |
| static struct i2c_driver act8865_pmic_driver = { | |
| .driver = { | |
| .name = "act8865", | |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, | |
| }, | |
| .probe = act8865_pmic_probe, | |
| .id_table = act8865_ids, | |
| }; | |
| module_i2c_driver(act8865_pmic_driver); | |
| MODULE_DESCRIPTION("active-semi act88xx voltage regulator driver"); | |
| MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>"); | |
| MODULE_LICENSE("GPL v2"); |