| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * First generation of pinmux driver for Amlogic Meson SoCs | |
| * | |
| * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com> | |
| * Copyright (C) 2017 Jerome Brunet <jbrunet@baylibre.com> | |
| */ | |
| /* For this first generation of pinctrl driver every pinmux group can be | |
| * enabled by a specific bit in the first register range. When all groups for | |
| * a given pin are disabled the pin acts as a GPIO. | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/regmap.h> | |
| #include <linux/pinctrl/pinctrl.h> | |
| #include <linux/pinctrl/pinmux.h> | |
| #include "pinctrl-meson.h" | |
| #include "pinctrl-meson8-pmx.h" | |
| /** | |
| * meson8_pmx_disable_other_groups() - disable other groups using a given pin | |
| * | |
| * @pc: meson pin controller device | |
| * @pin: number of the pin | |
| * @sel_group: index of the selected group, or -1 if none | |
| * | |
| * The function disables all pinmux groups using a pin except the | |
| * selected one. If @sel_group is -1 all groups are disabled, leaving | |
| * the pin in GPIO mode. | |
| */ | |
| static void meson8_pmx_disable_other_groups(struct meson_pinctrl *pc, | |
| unsigned int pin, int sel_group) | |
| { | |
| const struct meson_pmx_group *group; | |
| struct meson8_pmx_data *pmx_data; | |
| int i, j; | |
| for (i = 0; i < pc->data->num_groups; i++) { | |
| group = &pc->data->groups[i]; | |
| pmx_data = (struct meson8_pmx_data *)group->data; | |
| if (pmx_data->is_gpio || i == sel_group) | |
| continue; | |
| for (j = 0; j < group->num_pins; j++) { | |
| if (group->pins[j] == pin) { | |
| /* We have found a group using the pin */ | |
| regmap_update_bits(pc->reg_mux, | |
| pmx_data->reg * 4, | |
| BIT(pmx_data->bit), 0); | |
| } | |
| } | |
| } | |
| } | |
| static int meson8_pmx_set_mux(struct pinctrl_dev *pcdev, unsigned func_num, | |
| unsigned group_num) | |
| { | |
| struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev); | |
| const struct meson_pmx_func *func = &pc->data->funcs[func_num]; | |
| const struct meson_pmx_group *group = &pc->data->groups[group_num]; | |
| struct meson8_pmx_data *pmx_data = | |
| (struct meson8_pmx_data *)group->data; | |
| int i, ret = 0; | |
| dev_dbg(pc->dev, "enable function %s, group %s\n", func->name, | |
| group->name); | |
| /* | |
| * Disable groups using the same pin. | |
| * The selected group is not disabled to avoid glitches. | |
| */ | |
| for (i = 0; i < group->num_pins; i++) | |
| meson8_pmx_disable_other_groups(pc, group->pins[i], group_num); | |
| /* Function 0 (GPIO) doesn't need any additional setting */ | |
| if (func_num) | |
| ret = regmap_update_bits(pc->reg_mux, pmx_data->reg * 4, | |
| BIT(pmx_data->bit), | |
| BIT(pmx_data->bit)); | |
| return ret; | |
| } | |
| static int meson8_pmx_request_gpio(struct pinctrl_dev *pcdev, | |
| struct pinctrl_gpio_range *range, | |
| unsigned offset) | |
| { | |
| struct meson_pinctrl *pc = pinctrl_dev_get_drvdata(pcdev); | |
| meson8_pmx_disable_other_groups(pc, offset, -1); | |
| return 0; | |
| } | |
| const struct pinmux_ops meson8_pmx_ops = { | |
| .set_mux = meson8_pmx_set_mux, | |
| .get_functions_count = meson_pmx_get_funcs_count, | |
| .get_function_name = meson_pmx_get_func_name, | |
| .get_function_groups = meson_pmx_get_groups, | |
| .gpio_request_enable = meson8_pmx_request_gpio, | |
| }; | |
| EXPORT_SYMBOL_GPL(meson8_pmx_ops); | |
| MODULE_DESCRIPTION("Amlogic Meson SoCs first generation pinmux driver"); | |
| MODULE_LICENSE("GPL v2"); |