| // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) | |
| /* | |
| * Copyright (c) 2024 Amlogic, Inc. All rights reserved. | |
| * Author: Xianwei Zhao <xianwei.zhao@amlogic.com> | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/gpio/driver.h> | |
| #include <linux/init.h> | |
| #include <linux/io.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_address.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/slab.h> | |
| #include <linux/string_helpers.h> | |
| #include <linux/pinctrl/consumer.h> | |
| #include <linux/pinctrl/pinconf.h> | |
| #include <linux/pinctrl/pinctrl.h> | |
| #include <linux/pinctrl/pinmux.h> | |
| #include <dt-bindings/pinctrl/amlogic,pinctrl.h> | |
| #include "../core.h" | |
| #include "../pinctrl-utils.h" | |
| #include "../pinconf.h" | |
| #define gpio_chip_to_bank(chip) \ | |
| container_of(chip, struct aml_gpio_bank, gpio_chip) | |
| #define AML_REG_PULLEN 0 | |
| #define AML_REG_PULL 1 | |
| #define AML_REG_DIR 2 | |
| #define AML_REG_OUT 3 | |
| #define AML_REG_IN 4 | |
| #define AML_REG_DS 5 | |
| #define AML_NUM_REG 6 | |
| enum aml_pinconf_drv { | |
| PINCONF_DRV_500UA, | |
| PINCONF_DRV_2500UA, | |
| PINCONF_DRV_3000UA, | |
| PINCONF_DRV_4000UA, | |
| }; | |
| struct aml_pio_control { | |
| u32 gpio_offset; | |
| u32 reg_offset[AML_NUM_REG]; | |
| u32 bit_offset[AML_NUM_REG]; | |
| }; | |
| /* | |
| * partial bank(subordinate) pins mux config use other bank(main) mux registgers | |
| * m_bank_id: the main bank which pin_id from 0, but register bit not from bit 0 | |
| * m_bit_offs: bit offset the main bank mux register | |
| * s_bit_offs: start bit that subordinate bank use mux register | |
| * sid: start pin_id of subordinate bank | |
| * eid: end pin_id of subordinate bank | |
| * next: subordinate bank reused multiple other bank groups. | |
| */ | |
| struct multi_mux { | |
| unsigned int m_bank_id; | |
| unsigned int m_bit_offs; | |
| unsigned int s_bit_offs; | |
| unsigned int sid; | |
| unsigned int eid; | |
| const struct multi_mux *next; | |
| }; | |
| struct aml_pctl_data { | |
| unsigned int number; | |
| const struct multi_mux *p_mux; | |
| }; | |
| struct aml_pmx_func { | |
| const char *name; | |
| const char **groups; | |
| unsigned int ngroups; | |
| }; | |
| struct aml_pctl_group { | |
| const char *name; | |
| unsigned int npins; | |
| unsigned int *pins; | |
| unsigned int *func; | |
| }; | |
| struct aml_gpio_bank { | |
| struct gpio_chip gpio_chip; | |
| struct aml_pio_control pc; | |
| u32 bank_id; | |
| u32 mux_bit_offs; | |
| unsigned int pin_base; | |
| struct regmap *reg_mux; | |
| struct regmap *reg_gpio; | |
| struct regmap *reg_ds; | |
| const struct multi_mux *p_mux; | |
| }; | |
| struct aml_pinctrl { | |
| struct device *dev; | |
| struct pinctrl_dev *pctl; | |
| struct aml_gpio_bank *banks; | |
| int nbanks; | |
| struct aml_pmx_func *functions; | |
| int nfunctions; | |
| struct aml_pctl_group *groups; | |
| int ngroups; | |
| const struct aml_pctl_data *data; | |
| }; | |
| static const unsigned int aml_bit_strides[AML_NUM_REG] = { | |
| 1, 1, 1, 1, 1, 2 | |
| }; | |
| static const unsigned int aml_def_regoffs[AML_NUM_REG] = { | |
| 3, 4, 2, 1, 0, 7 | |
| }; | |
| static const char *aml_bank_name[31] = { | |
| "GPIOA", "GPIOB", "GPIOC", "GPIOD", "GPIOE", "GPIOF", "GPIOG", | |
| "GPIOH", "GPIOI", "GPIOJ", "GPIOK", "GPIOL", "GPIOM", "GPION", | |
| "GPIOO", "GPIOP", "GPIOQ", "GPIOR", "GPIOS", "GPIOT", "GPIOU", | |
| "GPIOV", "GPIOW", "GPIOX", "GPIOY", "GPIOZ", "GPIODV", "GPIOAO", | |
| "GPIOCC", "TEST_N", "ANALOG" | |
| }; | |
| static const struct multi_mux multi_mux_a9[] = { | |
| { | |
| .m_bank_id = AMLOGIC_GPIO_C, | |
| .m_bit_offs = 4, | |
| .s_bit_offs = 0, | |
| .sid = (AMLOGIC_GPIO_D << 8) + 16, | |
| .eid = (AMLOGIC_GPIO_D << 8) + 16, | |
| .next = &multi_mux_a9[1], | |
| }, { | |
| .m_bank_id = AMLOGIC_GPIO_AO, | |
| .m_bit_offs = 0, | |
| .s_bit_offs = 52, | |
| .sid = (AMLOGIC_GPIO_D << 8) + 17, | |
| .eid = (AMLOGIC_GPIO_D << 8) + 17, | |
| .next = NULL, | |
| }, { | |
| .m_bank_id = AMLOGIC_GPIO_A, | |
| .m_bit_offs = 0, | |
| .s_bit_offs = 80, | |
| .sid = (AMLOGIC_GPIO_Y << 8) + 8, | |
| .eid = (AMLOGIC_GPIO_Y << 8) + 9, | |
| .next = NULL, | |
| }, { | |
| .m_bank_id = AMLOGIC_GPIO_CC, | |
| .m_bit_offs = 24, | |
| .s_bit_offs = 0, | |
| .sid = (AMLOGIC_GPIO_X << 8) + 16, | |
| .eid = (AMLOGIC_GPIO_X << 8) + 17, | |
| .next = NULL, | |
| }, | |
| }; | |
| static const struct aml_pctl_data a9_priv_data = { | |
| .number = ARRAY_SIZE(multi_mux_a9), | |
| .p_mux = multi_mux_a9, | |
| }; | |
| static const struct multi_mux multi_mux_s7[] = { | |
| { | |
| .m_bank_id = AMLOGIC_GPIO_CC, | |
| .m_bit_offs = 24, | |
| .s_bit_offs = 0, | |
| .sid = (AMLOGIC_GPIO_X << 8) + 16, | |
| .eid = (AMLOGIC_GPIO_X << 8) + 19, | |
| .next = NULL, | |
| }, | |
| }; | |
| static const struct aml_pctl_data s7_priv_data = { | |
| .number = ARRAY_SIZE(multi_mux_s7), | |
| .p_mux = multi_mux_s7, | |
| }; | |
| static const struct multi_mux multi_mux_s6[] = { | |
| { | |
| .m_bank_id = AMLOGIC_GPIO_CC, | |
| .m_bit_offs = 24, | |
| .s_bit_offs = 0, | |
| .sid = (AMLOGIC_GPIO_X << 8) + 16, | |
| .eid = (AMLOGIC_GPIO_X << 8) + 19, | |
| .next = NULL, | |
| }, { | |
| .m_bank_id = AMLOGIC_GPIO_F, | |
| .m_bit_offs = 4, | |
| .s_bit_offs = 0, | |
| .sid = (AMLOGIC_GPIO_D << 8) + 6, | |
| .eid = (AMLOGIC_GPIO_D << 8) + 6, | |
| .next = NULL, | |
| }, | |
| }; | |
| static const struct aml_pctl_data s6_priv_data = { | |
| .number = ARRAY_SIZE(multi_mux_s6), | |
| .p_mux = multi_mux_s6, | |
| }; | |
| static int aml_pmx_calc_reg_and_offset(struct pinctrl_gpio_range *range, | |
| unsigned int pin, unsigned int *reg, | |
| unsigned int *offset) | |
| { | |
| unsigned int shift; | |
| shift = ((pin - range->pin_base) << 2) + *offset; | |
| *reg = (shift / 32) * 4; | |
| *offset = shift % 32; | |
| return 0; | |
| } | |
| static int aml_pctl_set_function(struct aml_pinctrl *info, | |
| struct pinctrl_gpio_range *range, | |
| int pin_id, int func) | |
| { | |
| struct aml_gpio_bank *bank = gpio_chip_to_bank(range->gc); | |
| unsigned int shift; | |
| int reg; | |
| int i, loop_count; | |
| unsigned int offset = bank->mux_bit_offs; | |
| const struct multi_mux *p_mux; | |
| /* peculiar mux reg set */ | |
| loop_count = 10; | |
| p_mux = bank->p_mux; | |
| while (p_mux && loop_count) { | |
| if (pin_id >= p_mux->sid && pin_id <= p_mux->eid) { | |
| bank = NULL; | |
| for (i = 0; i < info->nbanks; i++) { | |
| if (info->banks[i].bank_id == p_mux->m_bank_id) { | |
| bank = &info->banks[i]; | |
| break; | |
| } | |
| } | |
| if (!bank || !bank->reg_mux) | |
| return -EINVAL; | |
| shift = ((pin_id - p_mux->sid) << 2) + p_mux->s_bit_offs; | |
| reg = (shift / 32) * 4; | |
| offset = shift % 32; | |
| return regmap_update_bits(bank->reg_mux, reg, | |
| 0xf << offset, (func & 0xf) << offset); | |
| } | |
| p_mux = p_mux->next; | |
| loop_count--; | |
| } | |
| /* normal mux reg set */ | |
| if (!bank->reg_mux) | |
| return 0; | |
| aml_pmx_calc_reg_and_offset(range, pin_id, ®, &offset); | |
| return regmap_update_bits(bank->reg_mux, reg, | |
| 0xf << offset, (func & 0xf) << offset); | |
| } | |
| static int aml_pmx_get_funcs_count(struct pinctrl_dev *pctldev) | |
| { | |
| struct aml_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); | |
| return info->nfunctions; | |
| } | |
| static const char *aml_pmx_get_fname(struct pinctrl_dev *pctldev, | |
| unsigned int selector) | |
| { | |
| struct aml_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); | |
| return info->functions[selector].name; | |
| } | |
| static int aml_pmx_get_groups(struct pinctrl_dev *pctldev, | |
| unsigned int selector, | |
| const char * const **grps, | |
| unsigned * const ngrps) | |
| { | |
| struct aml_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); | |
| *grps = info->functions[selector].groups; | |
| *ngrps = info->functions[selector].ngroups; | |
| return 0; | |
| } | |
| static int aml_pmx_set_mux(struct pinctrl_dev *pctldev, unsigned int fselector, | |
| unsigned int group_id) | |
| { | |
| struct aml_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); | |
| struct aml_pctl_group *group = &info->groups[group_id]; | |
| struct pinctrl_gpio_range *range; | |
| int i; | |
| for (i = 0; i < group->npins; i++) { | |
| range = pinctrl_find_gpio_range_from_pin_nolock(pctldev, group->pins[i]); | |
| aml_pctl_set_function(info, range, group->pins[i], group->func[i]); | |
| } | |
| return 0; | |
| } | |
| static int aml_pmx_request_gpio(struct pinctrl_dev *pctldev, | |
| struct pinctrl_gpio_range *range, | |
| unsigned int pin) | |
| { | |
| struct aml_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); | |
| return aml_pctl_set_function(info, range, pin, 0); | |
| } | |
| static const struct pinmux_ops aml_pmx_ops = { | |
| .set_mux = aml_pmx_set_mux, | |
| .get_functions_count = aml_pmx_get_funcs_count, | |
| .get_function_name = aml_pmx_get_fname, | |
| .get_function_groups = aml_pmx_get_groups, | |
| .gpio_request_enable = aml_pmx_request_gpio, | |
| }; | |
| static int aml_calc_reg_and_bit(struct pinctrl_gpio_range *range, | |
| unsigned int pin, | |
| unsigned int reg_type, | |
| unsigned int *reg, unsigned int *bit) | |
| { | |
| struct aml_gpio_bank *bank = gpio_chip_to_bank(range->gc); | |
| *bit = (pin - range->pin_base) * aml_bit_strides[reg_type] | |
| + bank->pc.bit_offset[reg_type]; | |
| *reg = (bank->pc.reg_offset[reg_type] + (*bit / 32)) * 4; | |
| *bit &= 0x1f; | |
| return 0; | |
| } | |
| static int aml_pinconf_get_pull(struct aml_pinctrl *info, unsigned int pin) | |
| { | |
| struct pinctrl_gpio_range *range = | |
| pinctrl_find_gpio_range_from_pin_nolock(info->pctl, pin); | |
| struct aml_gpio_bank *bank = gpio_chip_to_bank(range->gc); | |
| unsigned int reg, bit, val; | |
| int ret, conf; | |
| aml_calc_reg_and_bit(range, pin, AML_REG_PULLEN, ®, &bit); | |
| ret = regmap_read(bank->reg_gpio, reg, &val); | |
| if (ret) | |
| return ret; | |
| if (!(val & BIT(bit))) { | |
| conf = PIN_CONFIG_BIAS_DISABLE; | |
| } else { | |
| aml_calc_reg_and_bit(range, pin, AML_REG_PULL, ®, &bit); | |
| ret = regmap_read(bank->reg_gpio, reg, &val); | |
| if (ret) | |
| return ret; | |
| if (val & BIT(bit)) | |
| conf = PIN_CONFIG_BIAS_PULL_UP; | |
| else | |
| conf = PIN_CONFIG_BIAS_PULL_DOWN; | |
| } | |
| return conf; | |
| } | |
| static int aml_pinconf_get_drive_strength(struct aml_pinctrl *info, | |
| unsigned int pin, | |
| u16 *drive_strength_ua) | |
| { | |
| struct pinctrl_gpio_range *range = | |
| pinctrl_find_gpio_range_from_pin_nolock(info->pctl, pin); | |
| struct aml_gpio_bank *bank = gpio_chip_to_bank(range->gc); | |
| unsigned int reg, bit; | |
| unsigned int val; | |
| int ret; | |
| if (!bank->reg_ds) | |
| return -EOPNOTSUPP; | |
| aml_calc_reg_and_bit(range, pin, AML_REG_DS, ®, &bit); | |
| ret = regmap_read(bank->reg_ds, reg, &val); | |
| if (ret) | |
| return ret; | |
| switch ((val >> bit) & 0x3) { | |
| case PINCONF_DRV_500UA: | |
| *drive_strength_ua = 500; | |
| break; | |
| case PINCONF_DRV_2500UA: | |
| *drive_strength_ua = 2500; | |
| break; | |
| case PINCONF_DRV_3000UA: | |
| *drive_strength_ua = 3000; | |
| break; | |
| case PINCONF_DRV_4000UA: | |
| *drive_strength_ua = 4000; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int aml_pinconf_get_gpio_bit(struct aml_pinctrl *info, | |
| unsigned int pin, | |
| unsigned int reg_type) | |
| { | |
| struct pinctrl_gpio_range *range = | |
| pinctrl_find_gpio_range_from_pin_nolock(info->pctl, pin); | |
| struct aml_gpio_bank *bank = gpio_chip_to_bank(range->gc); | |
| unsigned int reg, bit, val; | |
| int ret; | |
| aml_calc_reg_and_bit(range, pin, reg_type, ®, &bit); | |
| ret = regmap_read(bank->reg_gpio, reg, &val); | |
| if (ret) | |
| return ret; | |
| return BIT(bit) & val ? 1 : 0; | |
| } | |
| static int aml_pinconf_get_output(struct aml_pinctrl *info, | |
| unsigned int pin) | |
| { | |
| int ret = aml_pinconf_get_gpio_bit(info, pin, AML_REG_DIR); | |
| if (ret < 0) | |
| return ret; | |
| return !ret; | |
| } | |
| static int aml_pinconf_get_drive(struct aml_pinctrl *info, | |
| unsigned int pin) | |
| { | |
| return aml_pinconf_get_gpio_bit(info, pin, AML_REG_OUT); | |
| } | |
| static int aml_pinconf_get(struct pinctrl_dev *pcdev, unsigned int pin, | |
| unsigned long *config) | |
| { | |
| struct aml_pinctrl *info = pinctrl_dev_get_drvdata(pcdev); | |
| enum pin_config_param param = pinconf_to_config_param(*config); | |
| u16 arg; | |
| int ret; | |
| switch (param) { | |
| case PIN_CONFIG_BIAS_DISABLE: | |
| case PIN_CONFIG_BIAS_PULL_DOWN: | |
| case PIN_CONFIG_BIAS_PULL_UP: | |
| if (aml_pinconf_get_pull(info, pin) == param) | |
| arg = 1; | |
| else | |
| return -EINVAL; | |
| break; | |
| case PIN_CONFIG_DRIVE_STRENGTH_UA: | |
| ret = aml_pinconf_get_drive_strength(info, pin, &arg); | |
| if (ret) | |
| return ret; | |
| break; | |
| case PIN_CONFIG_OUTPUT_ENABLE: | |
| ret = aml_pinconf_get_output(info, pin); | |
| if (ret < 0) | |
| return -EINVAL; | |
| arg = ret; | |
| break; | |
| case PIN_CONFIG_INPUT_ENABLE: | |
| ret = aml_pinconf_get_output(info, pin); | |
| if (ret < 0) | |
| return -EINVAL; | |
| arg = !ret; | |
| break; | |
| case PIN_CONFIG_LEVEL: | |
| ret = aml_pinconf_get_output(info, pin); | |
| if (ret <= 0) | |
| return -EINVAL; | |
| ret = aml_pinconf_get_drive(info, pin); | |
| if (ret < 0) | |
| return -EINVAL; | |
| arg = ret; | |
| break; | |
| default: | |
| return -ENOTSUPP; | |
| } | |
| *config = pinconf_to_config_packed(param, arg); | |
| dev_dbg(info->dev, "pinconf for pin %u is %lu\n", pin, *config); | |
| return 0; | |
| } | |
| static int aml_pinconf_disable_bias(struct aml_pinctrl *info, | |
| unsigned int pin) | |
| { | |
| struct pinctrl_gpio_range *range = | |
| pinctrl_find_gpio_range_from_pin_nolock(info->pctl, pin); | |
| struct aml_gpio_bank *bank = gpio_chip_to_bank(range->gc); | |
| unsigned int reg, bit = 0; | |
| aml_calc_reg_and_bit(range, pin, AML_REG_PULLEN, ®, &bit); | |
| return regmap_update_bits(bank->reg_gpio, reg, BIT(bit), 0); | |
| } | |
| static int aml_pinconf_enable_bias(struct aml_pinctrl *info, unsigned int pin, | |
| bool pull_up) | |
| { | |
| struct pinctrl_gpio_range *range = | |
| pinctrl_find_gpio_range_from_pin_nolock(info->pctl, pin); | |
| struct aml_gpio_bank *bank = gpio_chip_to_bank(range->gc); | |
| unsigned int reg, bit, val = 0; | |
| int ret; | |
| aml_calc_reg_and_bit(range, pin, AML_REG_PULL, ®, &bit); | |
| if (pull_up) | |
| val = BIT(bit); | |
| ret = regmap_update_bits(bank->reg_gpio, reg, BIT(bit), val); | |
| if (ret) | |
| return ret; | |
| aml_calc_reg_and_bit(range, pin, AML_REG_PULLEN, ®, &bit); | |
| return regmap_update_bits(bank->reg_gpio, reg, BIT(bit), BIT(bit)); | |
| } | |
| static int aml_pinconf_set_drive_strength(struct aml_pinctrl *info, | |
| unsigned int pin, | |
| u16 drive_strength_ua) | |
| { | |
| struct pinctrl_gpio_range *range = | |
| pinctrl_find_gpio_range_from_pin_nolock(info->pctl, pin); | |
| struct aml_gpio_bank *bank = gpio_chip_to_bank(range->gc); | |
| unsigned int reg, bit, ds_val; | |
| if (!bank->reg_ds) { | |
| dev_err(info->dev, "drive-strength not supported\n"); | |
| return -EOPNOTSUPP; | |
| } | |
| aml_calc_reg_and_bit(range, pin, AML_REG_DS, ®, &bit); | |
| if (drive_strength_ua <= 500) { | |
| ds_val = PINCONF_DRV_500UA; | |
| } else if (drive_strength_ua <= 2500) { | |
| ds_val = PINCONF_DRV_2500UA; | |
| } else if (drive_strength_ua <= 3000) { | |
| ds_val = PINCONF_DRV_3000UA; | |
| } else if (drive_strength_ua <= 4000) { | |
| ds_val = PINCONF_DRV_4000UA; | |
| } else { | |
| dev_warn_once(info->dev, | |
| "pin %u: invalid drive-strength : %d , default to 4mA\n", | |
| pin, drive_strength_ua); | |
| ds_val = PINCONF_DRV_4000UA; | |
| } | |
| return regmap_update_bits(bank->reg_ds, reg, 0x3 << bit, ds_val << bit); | |
| } | |
| static int aml_pinconf_set_gpio_bit(struct aml_pinctrl *info, | |
| unsigned int pin, | |
| unsigned int reg_type, | |
| bool arg) | |
| { | |
| struct pinctrl_gpio_range *range = | |
| pinctrl_find_gpio_range_from_pin_nolock(info->pctl, pin); | |
| struct aml_gpio_bank *bank = gpio_chip_to_bank(range->gc); | |
| unsigned int reg, bit; | |
| aml_calc_reg_and_bit(range, pin, reg_type, ®, &bit); | |
| return regmap_update_bits(bank->reg_gpio, reg, BIT(bit), | |
| arg ? BIT(bit) : 0); | |
| } | |
| static int aml_pinconf_set_output(struct aml_pinctrl *info, | |
| unsigned int pin, | |
| bool out) | |
| { | |
| return aml_pinconf_set_gpio_bit(info, pin, AML_REG_DIR, !out); | |
| } | |
| static int aml_pinconf_set_drive(struct aml_pinctrl *info, | |
| unsigned int pin, | |
| bool high) | |
| { | |
| return aml_pinconf_set_gpio_bit(info, pin, AML_REG_OUT, high); | |
| } | |
| static int aml_pinconf_set_output_drive(struct aml_pinctrl *info, | |
| unsigned int pin, | |
| bool high) | |
| { | |
| int ret; | |
| ret = aml_pinconf_set_drive(info, pin, high); | |
| if (ret) | |
| return ret; | |
| return aml_pinconf_set_output(info, pin, true); | |
| } | |
| static int aml_pinconf_set(struct pinctrl_dev *pcdev, unsigned int pin, | |
| unsigned long *configs, unsigned int num_configs) | |
| { | |
| struct aml_pinctrl *info = pinctrl_dev_get_drvdata(pcdev); | |
| enum pin_config_param param; | |
| unsigned int arg = 0; | |
| int i, ret; | |
| for (i = 0; i < num_configs; i++) { | |
| param = pinconf_to_config_param(configs[i]); | |
| switch (param) { | |
| case PIN_CONFIG_DRIVE_STRENGTH_UA: | |
| case PIN_CONFIG_OUTPUT_ENABLE: | |
| case PIN_CONFIG_INPUT_ENABLE: | |
| case PIN_CONFIG_LEVEL: | |
| arg = pinconf_to_config_argument(configs[i]); | |
| break; | |
| default: | |
| break; | |
| } | |
| switch (param) { | |
| case PIN_CONFIG_BIAS_DISABLE: | |
| ret = aml_pinconf_disable_bias(info, pin); | |
| break; | |
| case PIN_CONFIG_BIAS_PULL_UP: | |
| ret = aml_pinconf_enable_bias(info, pin, true); | |
| break; | |
| case PIN_CONFIG_BIAS_PULL_DOWN: | |
| ret = aml_pinconf_enable_bias(info, pin, false); | |
| break; | |
| case PIN_CONFIG_DRIVE_STRENGTH_UA: | |
| ret = aml_pinconf_set_drive_strength(info, pin, arg); | |
| break; | |
| case PIN_CONFIG_OUTPUT_ENABLE: | |
| ret = aml_pinconf_set_output(info, pin, arg); | |
| break; | |
| case PIN_CONFIG_INPUT_ENABLE: | |
| ret = aml_pinconf_set_output(info, pin, !arg); | |
| break; | |
| case PIN_CONFIG_LEVEL: | |
| ret = aml_pinconf_set_output_drive(info, pin, arg); | |
| break; | |
| default: | |
| ret = -ENOTSUPP; | |
| } | |
| if (ret) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int aml_pinconf_group_set(struct pinctrl_dev *pcdev, | |
| unsigned int num_group, | |
| unsigned long *configs, | |
| unsigned int num_configs) | |
| { | |
| struct aml_pinctrl *info = pinctrl_dev_get_drvdata(pcdev); | |
| int i; | |
| for (i = 0; i < info->groups[num_group].npins; i++) { | |
| aml_pinconf_set(pcdev, info->groups[num_group].pins[i], configs, | |
| num_configs); | |
| } | |
| return 0; | |
| } | |
| static int aml_pinconf_group_get(struct pinctrl_dev *pcdev, | |
| unsigned int group, unsigned long *config) | |
| { | |
| return -EOPNOTSUPP; | |
| } | |
| static const struct pinconf_ops aml_pinconf_ops = { | |
| .pin_config_get = aml_pinconf_get, | |
| .pin_config_set = aml_pinconf_set, | |
| .pin_config_group_get = aml_pinconf_group_get, | |
| .pin_config_group_set = aml_pinconf_group_set, | |
| .is_generic = true, | |
| }; | |
| static int aml_get_groups_count(struct pinctrl_dev *pctldev) | |
| { | |
| struct aml_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); | |
| return info->ngroups; | |
| } | |
| static const char *aml_get_group_name(struct pinctrl_dev *pctldev, | |
| unsigned int selector) | |
| { | |
| struct aml_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); | |
| return info->groups[selector].name; | |
| } | |
| static int aml_get_group_pins(struct pinctrl_dev *pctldev, | |
| unsigned int selector, const unsigned int **pins, | |
| unsigned int *npins) | |
| { | |
| struct aml_pinctrl *info = pinctrl_dev_get_drvdata(pctldev); | |
| if (selector >= info->ngroups) | |
| return -EINVAL; | |
| *pins = info->groups[selector].pins; | |
| *npins = info->groups[selector].npins; | |
| return 0; | |
| } | |
| static void aml_pin_dbg_show(struct pinctrl_dev *pcdev, struct seq_file *s, | |
| unsigned int offset) | |
| { | |
| seq_printf(s, " %s", dev_name(pcdev->dev)); | |
| } | |
| static int aml_dt_node_to_map_pinmux(struct pinctrl_dev *pctldev, | |
| struct device_node *np, | |
| struct pinctrl_map **map, | |
| unsigned int *num_maps) | |
| { | |
| struct device *dev = pctldev->dev; | |
| unsigned long *configs = NULL; | |
| unsigned int num_configs = 0; | |
| struct property *prop; | |
| unsigned int reserved_maps; | |
| int reserve; | |
| int ret; | |
| prop = of_find_property(np, "pinmux", NULL); | |
| if (!prop) { | |
| dev_info(dev, "Missing pinmux property\n"); | |
| return -ENOENT; | |
| } | |
| struct device_node *pnode __free(device_node) = of_get_parent(np); | |
| if (!pnode) { | |
| dev_info(dev, "Missing function node\n"); | |
| return -EINVAL; | |
| } | |
| reserved_maps = 0; | |
| *map = NULL; | |
| *num_maps = 0; | |
| ret = pinconf_generic_parse_dt_config(np, pctldev, &configs, | |
| &num_configs); | |
| if (ret < 0) { | |
| dev_err(dev, "%pOF: could not parse node property\n", np); | |
| return ret; | |
| } | |
| reserve = 1; | |
| if (num_configs) | |
| reserve++; | |
| ret = pinctrl_utils_reserve_map(pctldev, map, &reserved_maps, | |
| num_maps, reserve); | |
| if (ret < 0) | |
| goto exit; | |
| ret = pinctrl_utils_add_map_mux(pctldev, map, | |
| &reserved_maps, num_maps, np->name, | |
| pnode->name); | |
| if (ret < 0) | |
| goto exit; | |
| if (num_configs) { | |
| ret = pinctrl_utils_add_map_configs(pctldev, map, &reserved_maps, | |
| num_maps, np->name, configs, | |
| num_configs, PIN_MAP_TYPE_CONFIGS_GROUP); | |
| if (ret < 0) | |
| goto exit; | |
| } | |
| exit: | |
| kfree(configs); | |
| if (ret) | |
| pinctrl_utils_free_map(pctldev, *map, *num_maps); | |
| return ret; | |
| } | |
| static const struct pinctrl_ops aml_pctrl_ops = { | |
| .get_groups_count = aml_get_groups_count, | |
| .get_group_name = aml_get_group_name, | |
| .get_group_pins = aml_get_group_pins, | |
| .dt_node_to_map = aml_dt_node_to_map_pinmux, | |
| .dt_free_map = pinconf_generic_dt_free_map, | |
| .pin_dbg_show = aml_pin_dbg_show, | |
| }; | |
| static int aml_pctl_parse_functions(struct device_node *np, | |
| struct aml_pinctrl *info, u32 index, | |
| int *grp_index) | |
| { | |
| struct device *dev = info->dev; | |
| struct aml_pmx_func *func; | |
| struct aml_pctl_group *grp; | |
| int ret, i; | |
| func = &info->functions[index]; | |
| func->name = np->name; | |
| func->ngroups = of_get_child_count(np); | |
| if (func->ngroups == 0) | |
| return dev_err_probe(dev, -EINVAL, "No groups defined\n"); | |
| func->groups = devm_kcalloc(dev, func->ngroups, sizeof(*func->groups), GFP_KERNEL); | |
| if (!func->groups) | |
| return -ENOMEM; | |
| i = 0; | |
| for_each_child_of_node_scoped(np, child) { | |
| func->groups[i++] = child->name; | |
| grp = &info->groups[*grp_index]; | |
| grp->name = child->name; | |
| *grp_index += 1; | |
| ret = pinconf_generic_parse_dt_pinmux(child, dev, &grp->pins, | |
| &grp->func, &grp->npins); | |
| if (ret) { | |
| dev_err(dev, "function :%s, groups:%s fail\n", func->name, child->name); | |
| return ret; | |
| } | |
| } | |
| dev_dbg(dev, "Function[%d\t name:%s,\tgroups:%d]\n", index, func->name, func->ngroups); | |
| return 0; | |
| } | |
| static u32 aml_bank_pins(struct device_node *np) | |
| { | |
| struct of_phandle_args of_args; | |
| if (of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, | |
| 0, &of_args)) | |
| return 0; | |
| of_node_put(of_args.np); | |
| return of_args.args[2]; | |
| } | |
| static int aml_bank_number(struct device_node *np) | |
| { | |
| struct of_phandle_args of_args; | |
| if (of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, | |
| 0, &of_args)) | |
| return -EINVAL; | |
| of_node_put(of_args.np); | |
| return of_args.args[1] >> 8; | |
| } | |
| static unsigned int aml_count_pins(struct device_node *np) | |
| { | |
| struct device_node *child; | |
| unsigned int pins = 0; | |
| for_each_child_of_node(np, child) { | |
| if (of_property_read_bool(child, "gpio-controller")) | |
| pins += aml_bank_pins(child); | |
| } | |
| return pins; | |
| } | |
| /* | |
| * A pinctrl device contains two types of nodes. The one named GPIO | |
| * bank which includes gpio-controller property. The other one named | |
| * function which includes one or more pin groups. The pin group | |
| * include pinmux property(global index in pinctrl dev, and mux vlaue | |
| * in mux reg) and pin configuration properties. | |
| */ | |
| static void aml_pctl_dt_child_count(struct aml_pinctrl *info, | |
| struct device_node *np) | |
| { | |
| struct device_node *child; | |
| for_each_child_of_node(np, child) { | |
| if (of_property_read_bool(child, "gpio-controller")) { | |
| info->nbanks++; | |
| } else { | |
| info->nfunctions++; | |
| info->ngroups += of_get_child_count(child); | |
| } | |
| } | |
| } | |
| static struct regmap *aml_map_resource(struct device *dev, unsigned int id, | |
| struct device_node *node, char *name) | |
| { | |
| struct resource res; | |
| void __iomem *base; | |
| int i; | |
| struct regmap_config aml_regmap_config = { | |
| .reg_bits = 32, | |
| .val_bits = 32, | |
| .reg_stride = 4, | |
| }; | |
| i = of_property_match_string(node, "reg-names", name); | |
| if (i < 0) | |
| return NULL; | |
| if (of_address_to_resource(node, i, &res)) | |
| return NULL; | |
| base = devm_ioremap_resource(dev, &res); | |
| if (IS_ERR(base)) | |
| return ERR_CAST(base); | |
| aml_regmap_config.max_register = resource_size(&res) - 4; | |
| aml_regmap_config.name = devm_kasprintf(dev, GFP_KERNEL, | |
| "%s-%s", aml_bank_name[id], name); | |
| if (!aml_regmap_config.name) | |
| return ERR_PTR(-ENOMEM); | |
| return devm_regmap_init_mmio(dev, base, &aml_regmap_config); | |
| } | |
| static inline int aml_gpio_calc_reg_and_bit(struct aml_gpio_bank *bank, | |
| unsigned int reg_type, | |
| unsigned int gpio, | |
| unsigned int *reg, | |
| unsigned int *bit) | |
| { | |
| *bit = gpio * aml_bit_strides[reg_type] + bank->pc.bit_offset[reg_type]; | |
| *reg = (bank->pc.reg_offset[reg_type] + (*bit / 32)) * 4; | |
| *bit &= 0x1f; | |
| return 0; | |
| } | |
| static int aml_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio) | |
| { | |
| struct aml_gpio_bank *bank = gpiochip_get_data(chip); | |
| unsigned int bit, reg, val; | |
| int ret; | |
| aml_gpio_calc_reg_and_bit(bank, AML_REG_DIR, gpio, ®, &bit); | |
| ret = regmap_read(bank->reg_gpio, reg, &val); | |
| if (ret) | |
| return ret; | |
| return BIT(bit) & val ? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT; | |
| } | |
| static int aml_gpio_direction_input(struct gpio_chip *chip, unsigned int gpio) | |
| { | |
| struct aml_gpio_bank *bank = gpiochip_get_data(chip); | |
| unsigned int bit, reg; | |
| aml_gpio_calc_reg_and_bit(bank, AML_REG_DIR, gpio, ®, &bit); | |
| return regmap_update_bits(bank->reg_gpio, reg, BIT(bit), BIT(bit)); | |
| } | |
| static int aml_gpio_direction_output(struct gpio_chip *chip, unsigned int gpio, | |
| int value) | |
| { | |
| struct aml_gpio_bank *bank = gpiochip_get_data(chip); | |
| unsigned int bit, reg; | |
| int ret; | |
| aml_gpio_calc_reg_and_bit(bank, AML_REG_OUT, gpio, ®, &bit); | |
| ret = regmap_update_bits(bank->reg_gpio, reg, BIT(bit), | |
| value ? BIT(bit) : 0); | |
| if (ret < 0) | |
| return ret; | |
| aml_gpio_calc_reg_and_bit(bank, AML_REG_DIR, gpio, ®, &bit); | |
| return regmap_update_bits(bank->reg_gpio, reg, BIT(bit), 0); | |
| } | |
| static int aml_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value) | |
| { | |
| struct aml_gpio_bank *bank = gpiochip_get_data(chip); | |
| unsigned int bit, reg; | |
| aml_gpio_calc_reg_and_bit(bank, AML_REG_OUT, gpio, ®, &bit); | |
| return regmap_update_bits(bank->reg_gpio, reg, BIT(bit), | |
| value ? BIT(bit) : 0); | |
| } | |
| static int aml_gpio_get(struct gpio_chip *chip, unsigned int gpio) | |
| { | |
| struct aml_gpio_bank *bank = gpiochip_get_data(chip); | |
| unsigned int reg, bit, val; | |
| aml_gpio_calc_reg_and_bit(bank, AML_REG_IN, gpio, ®, &bit); | |
| regmap_read(bank->reg_gpio, reg, &val); | |
| return !!(val & BIT(bit)); | |
| } | |
| static const struct gpio_chip aml_gpio_template = { | |
| .request = gpiochip_generic_request, | |
| .free = gpiochip_generic_free, | |
| .set_config = gpiochip_generic_config, | |
| .set = aml_gpio_set, | |
| .get = aml_gpio_get, | |
| .direction_input = aml_gpio_direction_input, | |
| .direction_output = aml_gpio_direction_output, | |
| .get_direction = aml_gpio_get_direction, | |
| .can_sleep = true, | |
| }; | |
| static void init_bank_register_bit(struct aml_pinctrl *info, | |
| struct aml_gpio_bank *bank) | |
| { | |
| const struct aml_pctl_data *data = info->data; | |
| const struct multi_mux *p_mux; | |
| int i; | |
| for (i = 0; i < AML_NUM_REG; i++) { | |
| bank->pc.reg_offset[i] = aml_def_regoffs[i]; | |
| bank->pc.bit_offset[i] = 0; | |
| } | |
| bank->mux_bit_offs = 0; | |
| if (data) { | |
| for (i = 0; i < data->number; i++) { | |
| p_mux = &data->p_mux[i]; | |
| if (bank->bank_id == p_mux->m_bank_id) { | |
| bank->mux_bit_offs = p_mux->m_bit_offs; | |
| break; | |
| } | |
| if (p_mux->sid >> 8 == bank->bank_id) { | |
| bank->p_mux = p_mux; | |
| break; | |
| } | |
| } | |
| } | |
| } | |
| static int aml_gpiolib_register_bank(struct aml_pinctrl *info, | |
| int bank_nr, struct device_node *np) | |
| { | |
| struct aml_gpio_bank *bank = &info->banks[bank_nr]; | |
| struct device *dev = info->dev; | |
| int ret = 0; | |
| ret = aml_bank_number(np); | |
| if (ret < 0) { | |
| dev_err(dev, "get num=%d bank identity fail\n", bank_nr); | |
| return -EINVAL; | |
| } | |
| bank->bank_id = ret; | |
| bank->reg_mux = aml_map_resource(dev, bank->bank_id, np, "mux"); | |
| if (IS_ERR_OR_NULL(bank->reg_mux)) { | |
| if (bank->bank_id == AMLOGIC_GPIO_TEST_N || | |
| bank->bank_id == AMLOGIC_GPIO_ANALOG) | |
| bank->reg_mux = NULL; | |
| else | |
| return dev_err_probe(dev, bank->reg_mux ? PTR_ERR(bank->reg_mux) : -ENOENT, | |
| "mux registers not found\n"); | |
| } | |
| bank->reg_gpio = aml_map_resource(dev, bank->bank_id, np, "gpio"); | |
| if (IS_ERR_OR_NULL(bank->reg_gpio)) | |
| return dev_err_probe(dev, bank->reg_gpio ? PTR_ERR(bank->reg_gpio) : -ENOENT, | |
| "gpio registers not found\n"); | |
| bank->reg_ds = aml_map_resource(dev, bank->bank_id, np, "ds"); | |
| if (IS_ERR_OR_NULL(bank->reg_ds)) { | |
| dev_dbg(info->dev, "ds registers not found - skipping\n"); | |
| bank->reg_ds = bank->reg_gpio; | |
| } | |
| bank->gpio_chip = aml_gpio_template; | |
| bank->gpio_chip.base = -1; | |
| bank->gpio_chip.ngpio = aml_bank_pins(np); | |
| bank->gpio_chip.fwnode = of_fwnode_handle(np); | |
| bank->gpio_chip.parent = dev; | |
| init_bank_register_bit(info, bank); | |
| bank->gpio_chip.label = aml_bank_name[bank->bank_id]; | |
| bank->pin_base = bank->bank_id << 8; | |
| return 0; | |
| } | |
| static int aml_pctl_probe_dt(struct platform_device *pdev, | |
| struct pinctrl_desc *pctl_desc, | |
| struct aml_pinctrl *info) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct pinctrl_pin_desc *pdesc; | |
| struct device_node *np = dev->of_node; | |
| int grp_index = 0; | |
| int i = 0, j = 0, k = 0, bank; | |
| int ret = 0; | |
| aml_pctl_dt_child_count(info, np); | |
| if (!info->nbanks) | |
| return dev_err_probe(dev, -EINVAL, "you need at least one gpio bank\n"); | |
| dev_dbg(dev, "nbanks = %d\n", info->nbanks); | |
| dev_dbg(dev, "nfunctions = %d\n", info->nfunctions); | |
| dev_dbg(dev, "ngroups = %d\n", info->ngroups); | |
| info->functions = devm_kcalloc(dev, info->nfunctions, sizeof(*info->functions), GFP_KERNEL); | |
| info->groups = devm_kcalloc(dev, info->ngroups, sizeof(*info->groups), GFP_KERNEL); | |
| info->banks = devm_kcalloc(dev, info->nbanks, sizeof(*info->banks), GFP_KERNEL); | |
| if (!info->functions || !info->groups || !info->banks) | |
| return -ENOMEM; | |
| info->data = (struct aml_pctl_data *)of_device_get_match_data(dev); | |
| pctl_desc->npins = aml_count_pins(np); | |
| pdesc = devm_kcalloc(dev, pctl_desc->npins, sizeof(*pdesc), GFP_KERNEL); | |
| if (!pdesc) | |
| return -ENOMEM; | |
| pctl_desc->pins = pdesc; | |
| bank = 0; | |
| for_each_child_of_node_scoped(np, child) { | |
| if (of_property_read_bool(child, "gpio-controller")) { | |
| const char *bank_name = NULL; | |
| char **pin_names; | |
| ret = aml_gpiolib_register_bank(info, bank, child); | |
| if (ret) | |
| return ret; | |
| k = info->banks[bank].pin_base; | |
| bank_name = info->banks[bank].gpio_chip.label; | |
| pin_names = devm_kasprintf_strarray(dev, bank_name, | |
| info->banks[bank].gpio_chip.ngpio); | |
| if (IS_ERR(pin_names)) | |
| return PTR_ERR(pin_names); | |
| for (j = 0; j < info->banks[bank].gpio_chip.ngpio; j++, k++) { | |
| pdesc->number = k; | |
| pdesc->name = pin_names[j]; | |
| pdesc++; | |
| } | |
| bank++; | |
| } else { | |
| ret = aml_pctl_parse_functions(child, info, | |
| i++, &grp_index); | |
| if (ret) | |
| return ret; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int aml_pctl_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct aml_pinctrl *info; | |
| struct pinctrl_desc *pctl_desc; | |
| int ret, i; | |
| pctl_desc = devm_kzalloc(dev, sizeof(*pctl_desc), GFP_KERNEL); | |
| if (!pctl_desc) | |
| return -ENOMEM; | |
| info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); | |
| if (!info) | |
| return -ENOMEM; | |
| info->dev = dev; | |
| platform_set_drvdata(pdev, info); | |
| ret = aml_pctl_probe_dt(pdev, pctl_desc, info); | |
| if (ret) | |
| return ret; | |
| pctl_desc->owner = THIS_MODULE; | |
| pctl_desc->pctlops = &aml_pctrl_ops; | |
| pctl_desc->pmxops = &aml_pmx_ops; | |
| pctl_desc->confops = &aml_pinconf_ops; | |
| pctl_desc->name = dev_name(dev); | |
| info->pctl = devm_pinctrl_register(dev, pctl_desc, info); | |
| if (IS_ERR(info->pctl)) | |
| return dev_err_probe(dev, PTR_ERR(info->pctl), "Failed pinctrl registration\n"); | |
| for (i = 0; i < info->nbanks; i++) { | |
| ret = gpiochip_add_data(&info->banks[i].gpio_chip, &info->banks[i]); | |
| if (ret) | |
| return dev_err_probe(dev, ret, "Failed to add gpiochip(%d)!\n", i); | |
| } | |
| return 0; | |
| } | |
| static const struct of_device_id aml_pctl_of_match[] = { | |
| { .compatible = "amlogic,pinctrl-a4", }, | |
| { .compatible = "amlogic,pinctrl-a9", .data = &a9_priv_data, }, | |
| { .compatible = "amlogic,pinctrl-s7", .data = &s7_priv_data, }, | |
| { .compatible = "amlogic,pinctrl-s6", .data = &s6_priv_data, }, | |
| { /* sentinel */ } | |
| }; | |
| MODULE_DEVICE_TABLE(of, aml_pctl_of_match); | |
| static struct platform_driver aml_pctl_driver = { | |
| .driver = { | |
| .name = "amlogic-pinctrl", | |
| .of_match_table = aml_pctl_of_match, | |
| }, | |
| .probe = aml_pctl_probe, | |
| }; | |
| module_platform_driver(aml_pctl_driver); | |
| MODULE_AUTHOR("Xianwei Zhao <xianwei.zhao@amlogic.com>"); | |
| MODULE_DESCRIPTION("Pin controller and GPIO driver for Amlogic SoC"); | |
| MODULE_LICENSE("Dual BSD/GPL"); |