| /* SPDX-License-Identifier: GPL-2.0+ */ | |
| /* | |
| * Header for Broadcom brcmstb GPIO based drivers | |
| * | |
| * Copyright (C) 2024-2025 Ivan T. Ivanov, Andrea della Porta | |
| * Copyright (C) 2021-3 Raspberry Pi Ltd. | |
| * Copyright (C) 2012 Chris Boot, Simon Arlott, Stephen Warren | |
| * | |
| * Based heavily on the BCM2835 GPIO & pinctrl driver, which was inspired by: | |
| * pinctrl-nomadik.c, please see original file for copyright information | |
| * pinctrl-tegra.c, please see original file for copyright information | |
| */ | |
| #ifndef __PINCTRL_BRCMSTB_H__ | |
| #define __PINCTRL_BRCMSTB_H__ | |
| #include <linux/types.h> | |
| #include <linux/platform_device.h> | |
| #define BRCMSTB_FUNC(f) \ | |
| [func_##f] = #f | |
| #define MUX_BIT_VALID 0x8000 | |
| #define PAD_BIT_INVALID 0xffff | |
| #define MUX_BIT(muxreg, muxshift) \ | |
| (MUX_BIT_VALID + ((muxreg) << 5) + ((muxshift) << 2)) | |
| #define PAD_BIT(padreg, padshift) \ | |
| (((padreg) << 5) + ((padshift) << 1)) | |
| #define GPIO_REGS(n, muxreg, muxshift, padreg, padshift) \ | |
| [n] = { MUX_BIT(muxreg, muxshift), PAD_BIT(padreg, padshift) } | |
| #define EMMC_REGS(n, padreg, padshift) \ | |
| [n] = { 0, PAD_BIT(padreg, padshift) } | |
| #define AON_GPIO_REGS(n, muxreg, muxshift, padreg, padshift) \ | |
| GPIO_REGS(n, muxreg, muxshift, padreg, padshift) | |
| #define AON_SGPIO_REGS(n, muxreg, muxshift) \ | |
| [(n) + 32] = { MUX_BIT(muxreg, muxshift), PAD_BIT_INVALID } | |
| #define GPIO_PIN(n) PINCTRL_PIN(n, "gpio" #n) | |
| /** | |
| * AON pins are in the Always-On power domain. SGPIOs are also 'Safe' | |
| * being 5V tolerant (necessary for the HDMI I2C pins), and can be driven | |
| * while the power is off. | |
| */ | |
| #define AON_GPIO_PIN(n) PINCTRL_PIN(n, "aon_gpio" #n) | |
| #define AON_SGPIO_PIN(n) PINCTRL_PIN((n) + 32, "aon_sgpio" #n) | |
| struct pin_regs { | |
| u16 mux_bit; | |
| u16 pad_bit; | |
| }; | |
| /** | |
| * struct brcmstb_pin_funcs - pins provide their primary/alternate | |
| * functions in this struct | |
| * @func_mask: mask representing valid bits of the function selector | |
| * in the registers | |
| * @funcs: array of function identifiers | |
| * @n_funcs: number of identifiers of the @funcs array above | |
| */ | |
| struct brcmstb_pin_funcs { | |
| const u32 func_mask; | |
| const u8 *funcs; | |
| const unsigned int n_funcs; | |
| }; | |
| /** | |
| * struct brcmstb_pdata - specific data for a pinctrl chip implementation | |
| * @pctl_desc: pin controller descriptor for this implementation | |
| * @gpio_range: range of GPIOs served by this controller | |
| * @pin_regs: array of register descriptors for each pin | |
| * @pin_funcs: array of all possible assignable function for each pin | |
| * @func_count: total number of functions | |
| * @func_gpio: which function number is GPIO (usually 0) | |
| * @func_names: an array listing all function names | |
| */ | |
| struct brcmstb_pdata { | |
| const struct pinctrl_desc *pctl_desc; | |
| const struct pinctrl_gpio_range *gpio_range; | |
| const struct pin_regs *pin_regs; | |
| const struct brcmstb_pin_funcs *pin_funcs; | |
| const unsigned int func_count; | |
| const unsigned int func_gpio; | |
| const char * const *func_names; | |
| }; | |
| int brcmstb_pinctrl_probe(struct platform_device *pdev); | |
| #endif |