| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * STMicroelectronics STM32 USB PHY Controller driver | |
| * | |
| * Copyright (C) 2018 STMicroelectronics | |
| * Author(s): Amelie Delaunay <amelie.delaunay@st.com>. | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/clk.h> | |
| #include <linux/clk-provider.h> | |
| #include <linux/delay.h> | |
| #include <linux/iopoll.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/phy/phy.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/reset.h> | |
| #include <linux/units.h> | |
| #define STM32_USBPHYC_PLL 0x0 | |
| #define STM32_USBPHYC_MISC 0x8 | |
| #define STM32_USBPHYC_MONITOR(X) (0x108 + ((X) * 0x100)) | |
| #define STM32_USBPHYC_TUNE(X) (0x10C + ((X) * 0x100)) | |
| #define STM32_USBPHYC_VERSION 0x3F4 | |
| /* STM32_USBPHYC_PLL bit fields */ | |
| #define PLLNDIV GENMASK(6, 0) | |
| #define PLLFRACIN GENMASK(25, 10) | |
| #define PLLEN BIT(26) | |
| #define PLLSTRB BIT(27) | |
| #define PLLSTRBYP BIT(28) | |
| #define PLLFRACCTL BIT(29) | |
| #define PLLDITHEN0 BIT(30) | |
| #define PLLDITHEN1 BIT(31) | |
| /* STM32_USBPHYC_MISC bit fields */ | |
| #define SWITHOST BIT(0) | |
| /* STM32_USBPHYC_MONITOR bit fields */ | |
| #define STM32_USBPHYC_MON_OUT GENMASK(3, 0) | |
| #define STM32_USBPHYC_MON_SEL GENMASK(8, 4) | |
| #define STM32_USBPHYC_MON_SEL_LOCKP 0x1F | |
| #define STM32_USBPHYC_MON_OUT_LOCKP BIT(3) | |
| /* STM32_USBPHYC_TUNE bit fields */ | |
| #define INCURREN BIT(0) | |
| #define INCURRINT BIT(1) | |
| #define LFSCAPEN BIT(2) | |
| #define HSDRVSLEW BIT(3) | |
| #define HSDRVDCCUR BIT(4) | |
| #define HSDRVDCLEV BIT(5) | |
| #define HSDRVCURINCR BIT(6) | |
| #define FSDRVRFADJ BIT(7) | |
| #define HSDRVRFRED BIT(8) | |
| #define HSDRVCHKITRM GENMASK(12, 9) | |
| #define HSDRVCHKZTRM GENMASK(14, 13) | |
| #define OTPCOMP GENMASK(19, 15) | |
| #define SQLCHCTL GENMASK(21, 20) | |
| #define HDRXGNEQEN BIT(22) | |
| #define HSRXOFF GENMASK(24, 23) | |
| #define HSFALLPREEM BIT(25) | |
| #define SHTCCTCTLPROT BIT(26) | |
| #define STAGSEL BIT(27) | |
| enum boosting_vals { | |
| BOOST_1000_UA = 1000, | |
| BOOST_2000_UA = 2000, | |
| }; | |
| enum dc_level_vals { | |
| DC_NOMINAL, | |
| DC_PLUS_5_TO_7_MV, | |
| DC_PLUS_10_TO_14_MV, | |
| DC_MINUS_5_TO_7_MV, | |
| DC_MAX, | |
| }; | |
| enum current_trim { | |
| CUR_NOMINAL, | |
| CUR_PLUS_1_56_PCT, | |
| CUR_PLUS_3_12_PCT, | |
| CUR_PLUS_4_68_PCT, | |
| CUR_PLUS_6_24_PCT, | |
| CUR_PLUS_7_8_PCT, | |
| CUR_PLUS_9_36_PCT, | |
| CUR_PLUS_10_92_PCT, | |
| CUR_PLUS_12_48_PCT, | |
| CUR_PLUS_14_04_PCT, | |
| CUR_PLUS_15_6_PCT, | |
| CUR_PLUS_17_16_PCT, | |
| CUR_PLUS_19_01_PCT, | |
| CUR_PLUS_20_58_PCT, | |
| CUR_PLUS_22_16_PCT, | |
| CUR_PLUS_23_73_PCT, | |
| CUR_MAX, | |
| }; | |
| enum impedance_trim { | |
| IMP_NOMINAL, | |
| IMP_MINUS_2_OHMS, | |
| IMP_MINUS_4_OMHS, | |
| IMP_MINUS_6_OHMS, | |
| IMP_MAX, | |
| }; | |
| enum squelch_level { | |
| SQLCH_NOMINAL, | |
| SQLCH_PLUS_7_MV, | |
| SQLCH_MINUS_5_MV, | |
| SQLCH_PLUS_14_MV, | |
| SQLCH_MAX, | |
| }; | |
| enum rx_offset { | |
| NO_RX_OFFSET, | |
| RX_OFFSET_PLUS_5_MV, | |
| RX_OFFSET_PLUS_10_MV, | |
| RX_OFFSET_MINUS_5_MV, | |
| RX_OFFSET_MAX, | |
| }; | |
| /* STM32_USBPHYC_VERSION bit fields */ | |
| #define MINREV GENMASK(3, 0) | |
| #define MAJREV GENMASK(7, 4) | |
| #define PLL_FVCO_MHZ 2880 | |
| #define PLL_INFF_MIN_RATE_HZ 19200000 | |
| #define PLL_INFF_MAX_RATE_HZ 38400000 | |
| struct pll_params { | |
| u8 ndiv; | |
| u16 frac; | |
| }; | |
| struct stm32_usbphyc_phy { | |
| struct phy *phy; | |
| struct stm32_usbphyc *usbphyc; | |
| struct regulator *vbus; | |
| u32 index; | |
| bool active; | |
| u32 tune; | |
| }; | |
| struct stm32_usbphyc { | |
| struct device *dev; | |
| void __iomem *base; | |
| struct clk *clk; | |
| struct reset_control *rst; | |
| struct stm32_usbphyc_phy **phys; | |
| int nphys; | |
| struct regulator *vdda1v1; | |
| struct regulator *vdda1v8; | |
| atomic_t n_pll_cons; | |
| struct clk_hw clk48_hw; | |
| int switch_setup; | |
| }; | |
| static inline void stm32_usbphyc_set_bits(void __iomem *reg, u32 bits) | |
| { | |
| writel_relaxed(readl_relaxed(reg) | bits, reg); | |
| } | |
| static inline void stm32_usbphyc_clr_bits(void __iomem *reg, u32 bits) | |
| { | |
| writel_relaxed(readl_relaxed(reg) & ~bits, reg); | |
| } | |
| static int stm32_usbphyc_regulators_enable(struct stm32_usbphyc *usbphyc) | |
| { | |
| int ret; | |
| ret = regulator_enable(usbphyc->vdda1v1); | |
| if (ret) | |
| return ret; | |
| ret = regulator_enable(usbphyc->vdda1v8); | |
| if (ret) | |
| goto vdda1v1_disable; | |
| return 0; | |
| vdda1v1_disable: | |
| regulator_disable(usbphyc->vdda1v1); | |
| return ret; | |
| } | |
| static int stm32_usbphyc_regulators_disable(struct stm32_usbphyc *usbphyc) | |
| { | |
| int ret; | |
| ret = regulator_disable(usbphyc->vdda1v8); | |
| if (ret) | |
| return ret; | |
| ret = regulator_disable(usbphyc->vdda1v1); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| static void stm32_usbphyc_get_pll_params(u32 clk_rate, | |
| struct pll_params *pll_params) | |
| { | |
| unsigned long long fvco, ndiv, frac; | |
| /* _ | |
| * | FVCO = INFF*2*(NDIV + FRACT/2^16) when DITHER_DISABLE[1] = 1 | |
| * | FVCO = 2880MHz | |
| * < | |
| * | NDIV = integer part of input bits to set the LDF | |
| * |_FRACT = fractional part of input bits to set the LDF | |
| * => PLLNDIV = integer part of (FVCO / (INFF*2)) | |
| * => PLLFRACIN = fractional part of(FVCO / INFF*2) * 2^16 | |
| * <=> PLLFRACIN = ((FVCO / (INFF*2)) - PLLNDIV) * 2^16 | |
| */ | |
| fvco = (unsigned long long)PLL_FVCO_MHZ * HZ_PER_MHZ; | |
| ndiv = fvco; | |
| do_div(ndiv, (clk_rate * 2)); | |
| pll_params->ndiv = (u8)ndiv; | |
| frac = fvco * (1 << 16); | |
| do_div(frac, (clk_rate * 2)); | |
| frac = frac - (ndiv * (1 << 16)); | |
| pll_params->frac = (u16)frac; | |
| } | |
| static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc) | |
| { | |
| struct pll_params pll_params; | |
| u32 clk_rate = clk_get_rate(usbphyc->clk); | |
| u32 ndiv, frac; | |
| u32 usbphyc_pll; | |
| if ((clk_rate < PLL_INFF_MIN_RATE_HZ) || | |
| (clk_rate > PLL_INFF_MAX_RATE_HZ)) { | |
| dev_err(usbphyc->dev, "input clk freq (%dHz) out of range\n", | |
| clk_rate); | |
| return -EINVAL; | |
| } | |
| stm32_usbphyc_get_pll_params(clk_rate, &pll_params); | |
| ndiv = FIELD_PREP(PLLNDIV, pll_params.ndiv); | |
| frac = FIELD_PREP(PLLFRACIN, pll_params.frac); | |
| usbphyc_pll = PLLDITHEN1 | PLLDITHEN0 | PLLSTRBYP | ndiv; | |
| if (pll_params.frac) | |
| usbphyc_pll |= PLLFRACCTL | frac; | |
| writel_relaxed(usbphyc_pll, usbphyc->base + STM32_USBPHYC_PLL); | |
| dev_dbg(usbphyc->dev, "input clk freq=%dHz, ndiv=%lu, frac=%lu\n", | |
| clk_rate, FIELD_GET(PLLNDIV, usbphyc_pll), | |
| FIELD_GET(PLLFRACIN, usbphyc_pll)); | |
| return 0; | |
| } | |
| static int __stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) | |
| { | |
| void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; | |
| u32 pllen; | |
| stm32_usbphyc_clr_bits(pll_reg, PLLEN); | |
| /* Wait for minimum width of powerdown pulse (ENABLE = Low) */ | |
| if (readl_relaxed_poll_timeout(pll_reg, pllen, !(pllen & PLLEN), 5, 50)) | |
| dev_err(usbphyc->dev, "PLL not reset\n"); | |
| return stm32_usbphyc_regulators_disable(usbphyc); | |
| } | |
| static int stm32_usbphyc_pll_disable(struct stm32_usbphyc *usbphyc) | |
| { | |
| /* Check if a phy port is still active or clk48 in use */ | |
| if (atomic_dec_return(&usbphyc->n_pll_cons) > 0) | |
| return 0; | |
| return __stm32_usbphyc_pll_disable(usbphyc); | |
| } | |
| static int stm32_usbphyc_pll_enable(struct stm32_usbphyc *usbphyc) | |
| { | |
| void __iomem *pll_reg = usbphyc->base + STM32_USBPHYC_PLL; | |
| bool pllen = readl_relaxed(pll_reg) & PLLEN; | |
| int ret; | |
| /* | |
| * Check if a phy port or clk48 prepare has configured the pll | |
| * and ensure the PLL is enabled | |
| */ | |
| if (atomic_inc_return(&usbphyc->n_pll_cons) > 1 && pllen) | |
| return 0; | |
| if (pllen) { | |
| /* | |
| * PLL shouldn't be enabled without known consumer, | |
| * disable it and reinit n_pll_cons | |
| */ | |
| dev_warn(usbphyc->dev, "PLL enabled without known consumers\n"); | |
| ret = __stm32_usbphyc_pll_disable(usbphyc); | |
| if (ret) | |
| goto dec_n_pll_cons; | |
| } | |
| ret = stm32_usbphyc_regulators_enable(usbphyc); | |
| if (ret) | |
| goto dec_n_pll_cons; | |
| ret = stm32_usbphyc_pll_init(usbphyc); | |
| if (ret) | |
| goto reg_disable; | |
| stm32_usbphyc_set_bits(pll_reg, PLLEN); | |
| /* Wait for maximum lock time */ | |
| usleep_range(200, 300); | |
| return 0; | |
| reg_disable: | |
| stm32_usbphyc_regulators_disable(usbphyc); | |
| dec_n_pll_cons: | |
| atomic_dec(&usbphyc->n_pll_cons); | |
| return ret; | |
| } | |
| static int stm32_usbphyc_phy_init(struct phy *phy) | |
| { | |
| struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); | |
| struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc; | |
| u32 reg_mon = STM32_USBPHYC_MONITOR(usbphyc_phy->index); | |
| u32 monsel = FIELD_PREP(STM32_USBPHYC_MON_SEL, | |
| STM32_USBPHYC_MON_SEL_LOCKP); | |
| u32 monout; | |
| int ret; | |
| ret = stm32_usbphyc_pll_enable(usbphyc); | |
| if (ret) | |
| return ret; | |
| /* Check that PLL Lock input to PHY is High */ | |
| writel_relaxed(monsel, usbphyc->base + reg_mon); | |
| ret = readl_relaxed_poll_timeout(usbphyc->base + reg_mon, monout, | |
| (monout & STM32_USBPHYC_MON_OUT_LOCKP), | |
| 100, 1000); | |
| if (ret) { | |
| dev_err(usbphyc->dev, "PLL Lock input to PHY is Low (val=%x)\n", | |
| (u32)(monout & STM32_USBPHYC_MON_OUT)); | |
| goto pll_disable; | |
| } | |
| usbphyc_phy->active = true; | |
| return 0; | |
| pll_disable: | |
| stm32_usbphyc_pll_disable(usbphyc); | |
| return ret; | |
| } | |
| static int stm32_usbphyc_phy_exit(struct phy *phy) | |
| { | |
| struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); | |
| struct stm32_usbphyc *usbphyc = usbphyc_phy->usbphyc; | |
| usbphyc_phy->active = false; | |
| return stm32_usbphyc_pll_disable(usbphyc); | |
| } | |
| static int stm32_usbphyc_phy_power_on(struct phy *phy) | |
| { | |
| struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); | |
| if (usbphyc_phy->vbus) | |
| return regulator_enable(usbphyc_phy->vbus); | |
| return 0; | |
| } | |
| static int stm32_usbphyc_phy_power_off(struct phy *phy) | |
| { | |
| struct stm32_usbphyc_phy *usbphyc_phy = phy_get_drvdata(phy); | |
| if (usbphyc_phy->vbus) | |
| return regulator_disable(usbphyc_phy->vbus); | |
| return 0; | |
| } | |
| static const struct phy_ops stm32_usbphyc_phy_ops = { | |
| .init = stm32_usbphyc_phy_init, | |
| .exit = stm32_usbphyc_phy_exit, | |
| .power_on = stm32_usbphyc_phy_power_on, | |
| .power_off = stm32_usbphyc_phy_power_off, | |
| .owner = THIS_MODULE, | |
| }; | |
| static int stm32_usbphyc_clk48_prepare(struct clk_hw *hw) | |
| { | |
| struct stm32_usbphyc *usbphyc = container_of(hw, struct stm32_usbphyc, clk48_hw); | |
| return stm32_usbphyc_pll_enable(usbphyc); | |
| } | |
| static void stm32_usbphyc_clk48_unprepare(struct clk_hw *hw) | |
| { | |
| struct stm32_usbphyc *usbphyc = container_of(hw, struct stm32_usbphyc, clk48_hw); | |
| stm32_usbphyc_pll_disable(usbphyc); | |
| } | |
| static unsigned long stm32_usbphyc_clk48_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) | |
| { | |
| return 48000000; | |
| } | |
| static const struct clk_ops usbphyc_clk48_ops = { | |
| .prepare = stm32_usbphyc_clk48_prepare, | |
| .unprepare = stm32_usbphyc_clk48_unprepare, | |
| .recalc_rate = stm32_usbphyc_clk48_recalc_rate, | |
| }; | |
| static void stm32_usbphyc_clk48_unregister(void *data) | |
| { | |
| struct stm32_usbphyc *usbphyc = data; | |
| of_clk_del_provider(usbphyc->dev->of_node); | |
| clk_hw_unregister(&usbphyc->clk48_hw); | |
| } | |
| static int stm32_usbphyc_clk48_register(struct stm32_usbphyc *usbphyc) | |
| { | |
| struct device_node *node = usbphyc->dev->of_node; | |
| struct clk_init_data init = { }; | |
| int ret = 0; | |
| init.name = "ck_usbo_48m"; | |
| init.ops = &usbphyc_clk48_ops; | |
| usbphyc->clk48_hw.init = &init; | |
| ret = clk_hw_register(usbphyc->dev, &usbphyc->clk48_hw); | |
| if (ret) | |
| return ret; | |
| ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &usbphyc->clk48_hw); | |
| if (ret) | |
| clk_hw_unregister(&usbphyc->clk48_hw); | |
| return ret; | |
| } | |
| static void stm32_usbphyc_phy_tuning(struct stm32_usbphyc *usbphyc, | |
| struct device_node *np, u32 index) | |
| { | |
| struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys[index]; | |
| u32 reg = STM32_USBPHYC_TUNE(index); | |
| u32 otpcomp, val; | |
| int ret; | |
| /* Backup OTP compensation code */ | |
| otpcomp = FIELD_GET(OTPCOMP, readl_relaxed(usbphyc->base + reg)); | |
| ret = of_property_read_u32(np, "st,current-boost-microamp", &val); | |
| if (ret != -EINVAL) { | |
| if (!ret && (val == BOOST_1000_UA || val == BOOST_2000_UA)) { | |
| val = (val == BOOST_2000_UA) ? 1 : 0; | |
| usbphyc_phy->tune |= INCURREN | FIELD_PREP(INCURRINT, val); | |
| } else { | |
| dev_warn(usbphyc->dev, "phy%d: invalid st,current-boost-microamp\n", index); | |
| } | |
| } | |
| if (!of_property_read_bool(np, "st,no-lsfs-fb-cap")) | |
| usbphyc_phy->tune |= LFSCAPEN; | |
| if (of_property_read_bool(np, "st,decrease-hs-slew-rate")) | |
| usbphyc_phy->tune |= HSDRVSLEW; | |
| ret = of_property_read_u32(np, "st,tune-hs-dc-level", &val); | |
| if (ret != -EINVAL) { | |
| if (!ret && val < DC_MAX) { | |
| if (val == DC_MINUS_5_TO_7_MV) {/* Decreases HS driver DC level */ | |
| usbphyc_phy->tune |= HSDRVDCCUR; | |
| } else if (val > 0) { /* Increases HS driver DC level */ | |
| val = (val == DC_PLUS_10_TO_14_MV) ? 1 : 0; | |
| usbphyc_phy->tune |= HSDRVCURINCR | FIELD_PREP(HSDRVDCLEV, val); | |
| } | |
| } else { | |
| dev_warn(usbphyc->dev, "phy%d: invalid st,tune-hs-dc-level\n", index); | |
| } | |
| } | |
| if (of_property_read_bool(np, "st,enable-fs-rftime-tuning")) | |
| usbphyc_phy->tune |= FSDRVRFADJ; | |
| if (of_property_read_bool(np, "st,enable-hs-rftime-reduction")) | |
| usbphyc_phy->tune |= HSDRVRFRED; | |
| ret = of_property_read_u32(np, "st,trim-hs-current", &val); | |
| if (ret != -EINVAL) { | |
| if (!ret && val < CUR_MAX) | |
| usbphyc_phy->tune |= FIELD_PREP(HSDRVCHKITRM, val); | |
| else | |
| dev_warn(usbphyc->dev, "phy%d: invalid st,trim-hs-current\n", index); | |
| } | |
| ret = of_property_read_u32(np, "st,trim-hs-impedance", &val); | |
| if (ret != -EINVAL) { | |
| if (!ret && val < IMP_MAX) | |
| usbphyc_phy->tune |= FIELD_PREP(HSDRVCHKZTRM, val); | |
| else | |
| dev_warn(usbphyc->dev, "phy%d: invalid st,trim-hs-impedance\n", index); | |
| } | |
| ret = of_property_read_u32(np, "st,tune-squelch-level", &val); | |
| if (ret != -EINVAL) { | |
| if (!ret && val < SQLCH_MAX) | |
| usbphyc_phy->tune |= FIELD_PREP(SQLCHCTL, val); | |
| else | |
| dev_warn(usbphyc->dev, "phy%d: invalid st,tune-squelch\n", index); | |
| } | |
| if (of_property_read_bool(np, "st,enable-hs-rx-gain-eq")) | |
| usbphyc_phy->tune |= HDRXGNEQEN; | |
| ret = of_property_read_u32(np, "st,tune-hs-rx-offset", &val); | |
| if (ret != -EINVAL) { | |
| if (!ret && val < RX_OFFSET_MAX) | |
| usbphyc_phy->tune |= FIELD_PREP(HSRXOFF, val); | |
| else | |
| dev_warn(usbphyc->dev, "phy%d: invalid st,tune-hs-rx-offset\n", index); | |
| } | |
| if (of_property_read_bool(np, "st,no-hs-ftime-ctrl")) | |
| usbphyc_phy->tune |= HSFALLPREEM; | |
| if (!of_property_read_bool(np, "st,no-lsfs-sc")) | |
| usbphyc_phy->tune |= SHTCCTCTLPROT; | |
| if (of_property_read_bool(np, "st,enable-hs-tx-staggering")) | |
| usbphyc_phy->tune |= STAGSEL; | |
| /* Restore OTP compensation code */ | |
| usbphyc_phy->tune |= FIELD_PREP(OTPCOMP, otpcomp); | |
| /* | |
| * By default, if no st,xxx tuning property is used, usbphyc_phy->tune is equal to | |
| * STM32_USBPHYC_TUNE reset value (LFSCAPEN | SHTCCTCTLPROT | OTPCOMP). | |
| */ | |
| writel_relaxed(usbphyc_phy->tune, usbphyc->base + reg); | |
| } | |
| static void stm32_usbphyc_switch_setup(struct stm32_usbphyc *usbphyc, | |
| u32 utmi_switch) | |
| { | |
| if (!utmi_switch) | |
| stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_MISC, | |
| SWITHOST); | |
| else | |
| stm32_usbphyc_set_bits(usbphyc->base + STM32_USBPHYC_MISC, | |
| SWITHOST); | |
| usbphyc->switch_setup = utmi_switch; | |
| } | |
| static struct phy *stm32_usbphyc_of_xlate(struct device *dev, | |
| const struct of_phandle_args *args) | |
| { | |
| struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev); | |
| struct stm32_usbphyc_phy *usbphyc_phy = NULL; | |
| struct device_node *phynode = args->np; | |
| int port = 0; | |
| for (port = 0; port < usbphyc->nphys; port++) { | |
| if (phynode == usbphyc->phys[port]->phy->dev.of_node) { | |
| usbphyc_phy = usbphyc->phys[port]; | |
| break; | |
| } | |
| } | |
| if (!usbphyc_phy) { | |
| dev_err(dev, "failed to find phy\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| if (((usbphyc_phy->index == 0) && (args->args_count != 0)) || | |
| ((usbphyc_phy->index == 1) && (args->args_count != 1))) { | |
| dev_err(dev, "invalid number of cells for phy port%d\n", | |
| usbphyc_phy->index); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| /* Configure the UTMI switch for PHY port#2 */ | |
| if (usbphyc_phy->index == 1) { | |
| if (usbphyc->switch_setup < 0) { | |
| stm32_usbphyc_switch_setup(usbphyc, args->args[0]); | |
| } else { | |
| if (args->args[0] != usbphyc->switch_setup) { | |
| dev_err(dev, "phy port1 already used\n"); | |
| return ERR_PTR(-EBUSY); | |
| } | |
| } | |
| } | |
| return usbphyc_phy->phy; | |
| } | |
| static int stm32_usbphyc_probe(struct platform_device *pdev) | |
| { | |
| struct stm32_usbphyc *usbphyc; | |
| struct device *dev = &pdev->dev; | |
| struct device_node *child, *np = dev->of_node; | |
| struct phy_provider *phy_provider; | |
| u32 pllen, version; | |
| int ret, port = 0; | |
| usbphyc = devm_kzalloc(dev, sizeof(*usbphyc), GFP_KERNEL); | |
| if (!usbphyc) | |
| return -ENOMEM; | |
| usbphyc->dev = dev; | |
| dev_set_drvdata(dev, usbphyc); | |
| usbphyc->base = devm_platform_ioremap_resource(pdev, 0); | |
| if (IS_ERR(usbphyc->base)) | |
| return PTR_ERR(usbphyc->base); | |
| usbphyc->clk = devm_clk_get(dev, NULL); | |
| if (IS_ERR(usbphyc->clk)) | |
| return dev_err_probe(dev, PTR_ERR(usbphyc->clk), "clk get_failed\n"); | |
| ret = clk_prepare_enable(usbphyc->clk); | |
| if (ret) { | |
| dev_err(dev, "clk enable failed: %d\n", ret); | |
| return ret; | |
| } | |
| usbphyc->rst = devm_reset_control_get(dev, NULL); | |
| if (!IS_ERR(usbphyc->rst)) { | |
| reset_control_assert(usbphyc->rst); | |
| udelay(2); | |
| reset_control_deassert(usbphyc->rst); | |
| } else { | |
| ret = PTR_ERR(usbphyc->rst); | |
| if (ret == -EPROBE_DEFER) | |
| goto clk_disable; | |
| stm32_usbphyc_clr_bits(usbphyc->base + STM32_USBPHYC_PLL, PLLEN); | |
| } | |
| /* | |
| * Wait for minimum width of powerdown pulse (ENABLE = Low): | |
| * we have to ensure the PLL is disabled before phys initialization. | |
| */ | |
| if (readl_relaxed_poll_timeout(usbphyc->base + STM32_USBPHYC_PLL, | |
| pllen, !(pllen & PLLEN), 5, 50)) { | |
| dev_warn(usbphyc->dev, "PLL not reset\n"); | |
| ret = -EPROBE_DEFER; | |
| goto clk_disable; | |
| } | |
| usbphyc->switch_setup = -EINVAL; | |
| usbphyc->nphys = of_get_child_count(np); | |
| usbphyc->phys = devm_kcalloc(dev, usbphyc->nphys, | |
| sizeof(*usbphyc->phys), GFP_KERNEL); | |
| if (!usbphyc->phys) { | |
| ret = -ENOMEM; | |
| goto clk_disable; | |
| } | |
| usbphyc->vdda1v1 = devm_regulator_get(dev, "vdda1v1"); | |
| if (IS_ERR(usbphyc->vdda1v1)) { | |
| ret = dev_err_probe(dev, PTR_ERR(usbphyc->vdda1v1), | |
| "failed to get vdda1v1 supply\n"); | |
| goto clk_disable; | |
| } | |
| usbphyc->vdda1v8 = devm_regulator_get(dev, "vdda1v8"); | |
| if (IS_ERR(usbphyc->vdda1v8)) { | |
| ret = dev_err_probe(dev, PTR_ERR(usbphyc->vdda1v8), | |
| "failed to get vdda1v8 supply\n"); | |
| goto clk_disable; | |
| } | |
| for_each_child_of_node(np, child) { | |
| struct stm32_usbphyc_phy *usbphyc_phy; | |
| struct phy *phy; | |
| u32 index; | |
| phy = devm_phy_create(dev, child, &stm32_usbphyc_phy_ops); | |
| if (IS_ERR(phy)) { | |
| ret = PTR_ERR(phy); | |
| if (ret != -EPROBE_DEFER) | |
| dev_err(dev, "failed to create phy%d: %d\n", | |
| port, ret); | |
| goto put_child; | |
| } | |
| usbphyc_phy = devm_kzalloc(dev, sizeof(*usbphyc_phy), | |
| GFP_KERNEL); | |
| if (!usbphyc_phy) { | |
| ret = -ENOMEM; | |
| goto put_child; | |
| } | |
| ret = of_property_read_u32(child, "reg", &index); | |
| if (ret || index >= usbphyc->nphys) { | |
| dev_err(&phy->dev, "invalid reg property: %d\n", ret); | |
| if (!ret) | |
| ret = -EINVAL; | |
| goto put_child; | |
| } | |
| usbphyc->phys[port] = usbphyc_phy; | |
| phy_set_bus_width(phy, 8); | |
| phy_set_drvdata(phy, usbphyc_phy); | |
| usbphyc->phys[port]->phy = phy; | |
| usbphyc->phys[port]->usbphyc = usbphyc; | |
| usbphyc->phys[port]->index = index; | |
| usbphyc->phys[port]->active = false; | |
| usbphyc->phys[port]->vbus = devm_regulator_get_optional(&phy->dev, "vbus"); | |
| if (IS_ERR(usbphyc->phys[port]->vbus)) { | |
| ret = PTR_ERR(usbphyc->phys[port]->vbus); | |
| if (ret == -EPROBE_DEFER) | |
| goto put_child; | |
| usbphyc->phys[port]->vbus = NULL; | |
| } | |
| /* Configure phy tuning */ | |
| stm32_usbphyc_phy_tuning(usbphyc, child, index); | |
| port++; | |
| } | |
| phy_provider = devm_of_phy_provider_register(dev, | |
| stm32_usbphyc_of_xlate); | |
| if (IS_ERR(phy_provider)) { | |
| ret = PTR_ERR(phy_provider); | |
| dev_err(dev, "failed to register phy provider: %d\n", ret); | |
| goto clk_disable; | |
| } | |
| ret = stm32_usbphyc_clk48_register(usbphyc); | |
| if (ret) { | |
| dev_err(dev, "failed to register ck_usbo_48m clock: %d\n", ret); | |
| goto clk_disable; | |
| } | |
| version = readl_relaxed(usbphyc->base + STM32_USBPHYC_VERSION); | |
| dev_dbg(dev, "registered rev: %lu.%lu\n", | |
| FIELD_GET(MAJREV, version), FIELD_GET(MINREV, version)); | |
| return 0; | |
| put_child: | |
| of_node_put(child); | |
| clk_disable: | |
| clk_disable_unprepare(usbphyc->clk); | |
| return ret; | |
| } | |
| static void stm32_usbphyc_remove(struct platform_device *pdev) | |
| { | |
| struct stm32_usbphyc *usbphyc = dev_get_drvdata(&pdev->dev); | |
| int port; | |
| /* Ensure PHYs are not active, to allow PLL disabling */ | |
| for (port = 0; port < usbphyc->nphys; port++) | |
| if (usbphyc->phys[port]->active) | |
| stm32_usbphyc_phy_exit(usbphyc->phys[port]->phy); | |
| stm32_usbphyc_clk48_unregister(usbphyc); | |
| clk_disable_unprepare(usbphyc->clk); | |
| } | |
| static int __maybe_unused stm32_usbphyc_resume(struct device *dev) | |
| { | |
| struct stm32_usbphyc *usbphyc = dev_get_drvdata(dev); | |
| struct stm32_usbphyc_phy *usbphyc_phy; | |
| int port; | |
| if (usbphyc->switch_setup >= 0) | |
| stm32_usbphyc_switch_setup(usbphyc, usbphyc->switch_setup); | |
| for (port = 0; port < usbphyc->nphys; port++) { | |
| usbphyc_phy = usbphyc->phys[port]; | |
| writel_relaxed(usbphyc_phy->tune, usbphyc->base + STM32_USBPHYC_TUNE(port)); | |
| } | |
| return 0; | |
| } | |
| static SIMPLE_DEV_PM_OPS(stm32_usbphyc_pm_ops, NULL, stm32_usbphyc_resume); | |
| static const struct of_device_id stm32_usbphyc_of_match[] = { | |
| { .compatible = "st,stm32mp1-usbphyc", }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, stm32_usbphyc_of_match); | |
| static struct platform_driver stm32_usbphyc_driver = { | |
| .probe = stm32_usbphyc_probe, | |
| .remove = stm32_usbphyc_remove, | |
| .driver = { | |
| .of_match_table = stm32_usbphyc_of_match, | |
| .name = "stm32-usbphyc", | |
| .pm = &stm32_usbphyc_pm_ops, | |
| } | |
| }; | |
| module_platform_driver(stm32_usbphyc_driver); | |
| MODULE_DESCRIPTION("STMicroelectronics STM32 USBPHYC driver"); | |
| MODULE_AUTHOR("Amelie Delaunay <amelie.delaunay@st.com>"); | |
| MODULE_LICENSE("GPL v2"); |