| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * phy-uniphier-usb2.c - PHY driver for UniPhier USB2 controller | |
| * Copyright 2015-2018 Socionext Inc. | |
| * Author: | |
| * Kunihiko Hayashi <hayashi.kunihiko@socionext.com> | |
| */ | |
| #include <linux/mfd/syscon.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/phy/phy.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regmap.h> | |
| #include <linux/regulator/consumer.h> | |
| #define SG_USBPHY1CTRL 0x500 | |
| #define SG_USBPHY1CTRL2 0x504 | |
| #define SG_USBPHY2CTRL 0x508 | |
| #define SG_USBPHY2CTRL2 0x50c /* LD11 */ | |
| #define SG_USBPHY12PLL 0x50c /* Pro4 */ | |
| #define SG_USBPHY3CTRL 0x510 | |
| #define SG_USBPHY3CTRL2 0x514 | |
| #define SG_USBPHY4CTRL 0x518 /* Pro4 */ | |
| #define SG_USBPHY4CTRL2 0x51c /* Pro4 */ | |
| #define SG_USBPHY34PLL 0x51c /* Pro4 */ | |
| struct uniphier_u2phy_param { | |
| u32 offset; | |
| u32 value; | |
| }; | |
| struct uniphier_u2phy_soc_data { | |
| struct uniphier_u2phy_param config0; | |
| struct uniphier_u2phy_param config1; | |
| }; | |
| struct uniphier_u2phy_priv { | |
| struct regmap *regmap; | |
| struct phy *phy; | |
| struct regulator *vbus; | |
| const struct uniphier_u2phy_soc_data *data; | |
| struct uniphier_u2phy_priv *next; | |
| }; | |
| static int uniphier_u2phy_power_on(struct phy *phy) | |
| { | |
| struct uniphier_u2phy_priv *priv = phy_get_drvdata(phy); | |
| int ret = 0; | |
| if (priv->vbus) | |
| ret = regulator_enable(priv->vbus); | |
| return ret; | |
| } | |
| static int uniphier_u2phy_power_off(struct phy *phy) | |
| { | |
| struct uniphier_u2phy_priv *priv = phy_get_drvdata(phy); | |
| if (priv->vbus) | |
| regulator_disable(priv->vbus); | |
| return 0; | |
| } | |
| static int uniphier_u2phy_init(struct phy *phy) | |
| { | |
| struct uniphier_u2phy_priv *priv = phy_get_drvdata(phy); | |
| if (!priv->data) | |
| return 0; | |
| regmap_write(priv->regmap, priv->data->config0.offset, | |
| priv->data->config0.value); | |
| regmap_write(priv->regmap, priv->data->config1.offset, | |
| priv->data->config1.value); | |
| return 0; | |
| } | |
| static struct phy *uniphier_u2phy_xlate(struct device *dev, | |
| const struct of_phandle_args *args) | |
| { | |
| struct uniphier_u2phy_priv *priv = dev_get_drvdata(dev); | |
| while (priv && args->np != priv->phy->dev.of_node) | |
| priv = priv->next; | |
| if (!priv) { | |
| dev_err(dev, "Failed to find appropriate phy\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| return priv->phy; | |
| } | |
| static const struct phy_ops uniphier_u2phy_ops = { | |
| .init = uniphier_u2phy_init, | |
| .power_on = uniphier_u2phy_power_on, | |
| .power_off = uniphier_u2phy_power_off, | |
| .owner = THIS_MODULE, | |
| }; | |
| static int uniphier_u2phy_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct device_node *parent; | |
| struct uniphier_u2phy_priv *priv = NULL, *next = NULL; | |
| struct phy_provider *phy_provider; | |
| struct regmap *regmap; | |
| const struct uniphier_u2phy_soc_data *data; | |
| int ret, data_idx, ndatas; | |
| data = of_device_get_match_data(dev); | |
| if (WARN_ON(!data)) | |
| return -EINVAL; | |
| /* get number of data */ | |
| for (ndatas = 0; data[ndatas].config0.offset; ndatas++) | |
| ; | |
| parent = of_get_parent(dev->of_node); | |
| regmap = syscon_node_to_regmap(parent); | |
| of_node_put(parent); | |
| if (IS_ERR(regmap)) { | |
| dev_err(dev, "Failed to get regmap\n"); | |
| return PTR_ERR(regmap); | |
| } | |
| for_each_child_of_node_scoped(dev->of_node, child) { | |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| priv->regmap = regmap; | |
| priv->vbus = devm_regulator_get_optional(dev, "vbus"); | |
| if (IS_ERR(priv->vbus)) { | |
| if (PTR_ERR(priv->vbus) == -EPROBE_DEFER) | |
| return PTR_ERR(priv->vbus); | |
| priv->vbus = NULL; | |
| } | |
| priv->phy = devm_phy_create(dev, child, &uniphier_u2phy_ops); | |
| if (IS_ERR(priv->phy)) { | |
| dev_err(dev, "Failed to create phy\n"); | |
| return PTR_ERR(priv->phy); | |
| } | |
| ret = of_property_read_u32(child, "reg", &data_idx); | |
| if (ret) { | |
| dev_err(dev, "Failed to get reg property\n"); | |
| return ret; | |
| } | |
| if (data_idx < ndatas) | |
| priv->data = &data[data_idx]; | |
| else | |
| dev_warn(dev, "No phy configuration: %s\n", | |
| child->full_name); | |
| phy_set_drvdata(priv->phy, priv); | |
| priv->next = next; | |
| next = priv; | |
| } | |
| dev_set_drvdata(dev, priv); | |
| phy_provider = devm_of_phy_provider_register(dev, | |
| uniphier_u2phy_xlate); | |
| return PTR_ERR_OR_ZERO(phy_provider); | |
| } | |
| static const struct uniphier_u2phy_soc_data uniphier_pro4_data[] = { | |
| { | |
| .config0 = { SG_USBPHY1CTRL, 0x05142400 }, | |
| .config1 = { SG_USBPHY12PLL, 0x00010010 }, | |
| }, | |
| { | |
| .config0 = { SG_USBPHY2CTRL, 0x05142400 }, | |
| .config1 = { SG_USBPHY12PLL, 0x00010010 }, | |
| }, | |
| { | |
| .config0 = { SG_USBPHY3CTRL, 0x05142400 }, | |
| .config1 = { SG_USBPHY34PLL, 0x00010010 }, | |
| }, | |
| { | |
| .config0 = { SG_USBPHY4CTRL, 0x05142400 }, | |
| .config1 = { SG_USBPHY34PLL, 0x00010010 }, | |
| }, | |
| { /* sentinel */ } | |
| }; | |
| static const struct uniphier_u2phy_soc_data uniphier_ld11_data[] = { | |
| { | |
| .config0 = { SG_USBPHY1CTRL, 0x82280000 }, | |
| .config1 = { SG_USBPHY1CTRL2, 0x00000106 }, | |
| }, | |
| { | |
| .config0 = { SG_USBPHY2CTRL, 0x82280000 }, | |
| .config1 = { SG_USBPHY2CTRL2, 0x00000106 }, | |
| }, | |
| { | |
| .config0 = { SG_USBPHY3CTRL, 0x82280000 }, | |
| .config1 = { SG_USBPHY3CTRL2, 0x00000106 }, | |
| }, | |
| { /* sentinel */ } | |
| }; | |
| static const struct of_device_id uniphier_u2phy_match[] = { | |
| { | |
| .compatible = "socionext,uniphier-pro4-usb2-phy", | |
| .data = &uniphier_pro4_data, | |
| }, | |
| { | |
| .compatible = "socionext,uniphier-ld11-usb2-phy", | |
| .data = &uniphier_ld11_data, | |
| }, | |
| { /* sentinel */ } | |
| }; | |
| MODULE_DEVICE_TABLE(of, uniphier_u2phy_match); | |
| static struct platform_driver uniphier_u2phy_driver = { | |
| .probe = uniphier_u2phy_probe, | |
| .driver = { | |
| .name = "uniphier-usb2-phy", | |
| .of_match_table = uniphier_u2phy_match, | |
| }, | |
| }; | |
| module_platform_driver(uniphier_u2phy_driver); | |
| MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>"); | |
| MODULE_DESCRIPTION("UniPhier PHY driver for USB2 controller"); | |
| MODULE_LICENSE("GPL v2"); |