| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Perf support for the Statistical Profiling Extension, introduced as | |
| * part of ARMv8.2. | |
| * | |
| * Copyright (C) 2016 ARM Limited | |
| * | |
| * Author: Will Deacon <will.deacon@arm.com> | |
| */ | |
| #define PMUNAME "arm_spe" | |
| #define DRVNAME PMUNAME "_pmu" | |
| #define pr_fmt(fmt) DRVNAME ": " fmt | |
| #include <linux/bitfield.h> | |
| #include <linux/bitops.h> | |
| #include <linux/bug.h> | |
| #include <linux/capability.h> | |
| #include <linux/cpuhotplug.h> | |
| #include <linux/cpumask.h> | |
| #include <linux/device.h> | |
| #include <linux/errno.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/kernel.h> | |
| #include <linux/list.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/perf_event.h> | |
| #include <linux/perf/arm_pmu.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/printk.h> | |
| #include <linux/slab.h> | |
| #include <linux/smp.h> | |
| #include <linux/vmalloc.h> | |
| #include <asm/barrier.h> | |
| #include <asm/cpufeature.h> | |
| #include <asm/mmu.h> | |
| #include <asm/sysreg.h> | |
| /* | |
| * Cache if the event is allowed to trace Context information. | |
| * This allows us to perform the check, i.e, perf_allow_kernel(), | |
| * in the context of the event owner, once, during the event_init(). | |
| */ | |
| #define SPE_PMU_HW_FLAGS_CX 0x00001 | |
| static_assert((PERF_EVENT_FLAG_ARCH & SPE_PMU_HW_FLAGS_CX) == SPE_PMU_HW_FLAGS_CX); | |
| static void set_spe_event_has_cx(struct perf_event *event) | |
| { | |
| if (IS_ENABLED(CONFIG_PID_IN_CONTEXTIDR) && !perf_allow_kernel()) | |
| event->hw.flags |= SPE_PMU_HW_FLAGS_CX; | |
| } | |
| static bool get_spe_event_has_cx(struct perf_event *event) | |
| { | |
| return !!(event->hw.flags & SPE_PMU_HW_FLAGS_CX); | |
| } | |
| #define ARM_SPE_BUF_PAD_BYTE 0 | |
| struct arm_spe_pmu_buf { | |
| int nr_pages; | |
| bool snapshot; | |
| void *base; | |
| }; | |
| struct arm_spe_pmu { | |
| struct pmu pmu; | |
| struct platform_device *pdev; | |
| cpumask_t supported_cpus; | |
| struct hlist_node hotplug_node; | |
| int irq; /* PPI */ | |
| u16 pmsver; | |
| u16 min_period; | |
| u16 counter_sz; | |
| #define SPE_PMU_FEAT_FILT_EVT (1UL << 0) | |
| #define SPE_PMU_FEAT_FILT_TYP (1UL << 1) | |
| #define SPE_PMU_FEAT_FILT_LAT (1UL << 2) | |
| #define SPE_PMU_FEAT_ARCH_INST (1UL << 3) | |
| #define SPE_PMU_FEAT_LDS (1UL << 4) | |
| #define SPE_PMU_FEAT_ERND (1UL << 5) | |
| #define SPE_PMU_FEAT_INV_FILT_EVT (1UL << 6) | |
| #define SPE_PMU_FEAT_DISCARD (1UL << 7) | |
| #define SPE_PMU_FEAT_EFT (1UL << 8) | |
| #define SPE_PMU_FEAT_FDS (1UL << 9) | |
| #define SPE_PMU_FEAT_DEV_PROBED (1UL << 63) | |
| u64 features; | |
| u64 pmsevfr_res0; | |
| u16 max_record_sz; | |
| u16 align; | |
| struct perf_output_handle __percpu *handle; | |
| }; | |
| #define to_spe_pmu(p) (container_of(p, struct arm_spe_pmu, pmu)) | |
| /* Convert a free-running index from perf into an SPE buffer offset */ | |
| #define PERF_IDX2OFF(idx, buf) \ | |
| ((idx) % ((unsigned long)(buf)->nr_pages << PAGE_SHIFT)) | |
| /* Keep track of our dynamic hotplug state */ | |
| static enum cpuhp_state arm_spe_pmu_online; | |
| static void arm_spe_pmu_stop(struct perf_event *event, int flags); | |
| enum arm_spe_pmu_buf_fault_action { | |
| SPE_PMU_BUF_FAULT_ACT_SPURIOUS, | |
| SPE_PMU_BUF_FAULT_ACT_FATAL, | |
| SPE_PMU_BUF_FAULT_ACT_OK, | |
| }; | |
| /* This sysfs gunk was really good fun to write. */ | |
| enum arm_spe_pmu_capabilities { | |
| SPE_PMU_CAP_ARCH_INST = 0, | |
| SPE_PMU_CAP_ERND, | |
| SPE_PMU_CAP_FEAT_MAX, | |
| SPE_PMU_CAP_CNT_SZ = SPE_PMU_CAP_FEAT_MAX, | |
| SPE_PMU_CAP_MIN_IVAL, | |
| SPE_PMU_CAP_EVENT_FILTER, | |
| }; | |
| static int arm_spe_pmu_feat_caps[SPE_PMU_CAP_FEAT_MAX] = { | |
| [SPE_PMU_CAP_ARCH_INST] = SPE_PMU_FEAT_ARCH_INST, | |
| [SPE_PMU_CAP_ERND] = SPE_PMU_FEAT_ERND, | |
| }; | |
| static u64 arm_spe_pmu_cap_get(struct arm_spe_pmu *spe_pmu, int cap) | |
| { | |
| if (cap < SPE_PMU_CAP_FEAT_MAX) | |
| return !!(spe_pmu->features & arm_spe_pmu_feat_caps[cap]); | |
| switch (cap) { | |
| case SPE_PMU_CAP_CNT_SZ: | |
| return spe_pmu->counter_sz; | |
| case SPE_PMU_CAP_MIN_IVAL: | |
| return spe_pmu->min_period; | |
| case SPE_PMU_CAP_EVENT_FILTER: | |
| return ~spe_pmu->pmsevfr_res0; | |
| default: | |
| WARN(1, "unknown cap %d\n", cap); | |
| } | |
| return 0; | |
| } | |
| static ssize_t arm_spe_pmu_cap_show(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev); | |
| struct dev_ext_attribute *ea = | |
| container_of(attr, struct dev_ext_attribute, attr); | |
| int cap = (long)ea->var; | |
| return sysfs_emit(buf, "%llu\n", arm_spe_pmu_cap_get(spe_pmu, cap)); | |
| } | |
| static ssize_t arm_spe_pmu_cap_show_hex(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev); | |
| struct dev_ext_attribute *ea = | |
| container_of(attr, struct dev_ext_attribute, attr); | |
| int cap = (long)ea->var; | |
| return sysfs_emit(buf, "0x%llx\n", arm_spe_pmu_cap_get(spe_pmu, cap)); | |
| } | |
| #define SPE_EXT_ATTR_ENTRY(_name, _func, _var) \ | |
| &((struct dev_ext_attribute[]) { \ | |
| { __ATTR(_name, S_IRUGO, _func, NULL), (void *)_var } \ | |
| })[0].attr.attr | |
| #define SPE_CAP_EXT_ATTR_ENTRY(_name, _var) \ | |
| SPE_EXT_ATTR_ENTRY(_name, arm_spe_pmu_cap_show, _var) | |
| #define SPE_CAP_EXT_ATTR_ENTRY_HEX(_name, _var) \ | |
| SPE_EXT_ATTR_ENTRY(_name, arm_spe_pmu_cap_show_hex, _var) | |
| static struct attribute *arm_spe_pmu_cap_attr[] = { | |
| SPE_CAP_EXT_ATTR_ENTRY(arch_inst, SPE_PMU_CAP_ARCH_INST), | |
| SPE_CAP_EXT_ATTR_ENTRY(ernd, SPE_PMU_CAP_ERND), | |
| SPE_CAP_EXT_ATTR_ENTRY(count_size, SPE_PMU_CAP_CNT_SZ), | |
| SPE_CAP_EXT_ATTR_ENTRY(min_interval, SPE_PMU_CAP_MIN_IVAL), | |
| SPE_CAP_EXT_ATTR_ENTRY_HEX(event_filter, SPE_PMU_CAP_EVENT_FILTER), | |
| NULL, | |
| }; | |
| static const struct attribute_group arm_spe_pmu_cap_group = { | |
| .name = "caps", | |
| .attrs = arm_spe_pmu_cap_attr, | |
| }; | |
| /* User ABI */ | |
| #define ATTR_CFG_FLD_ts_enable_CFG config /* PMSCR_EL1.TS */ | |
| #define ATTR_CFG_FLD_ts_enable_LO 0 | |
| #define ATTR_CFG_FLD_ts_enable_HI 0 | |
| #define ATTR_CFG_FLD_pa_enable_CFG config /* PMSCR_EL1.PA */ | |
| #define ATTR_CFG_FLD_pa_enable_LO 1 | |
| #define ATTR_CFG_FLD_pa_enable_HI 1 | |
| #define ATTR_CFG_FLD_pct_enable_CFG config /* PMSCR_EL1.PCT */ | |
| #define ATTR_CFG_FLD_pct_enable_LO 2 | |
| #define ATTR_CFG_FLD_pct_enable_HI 2 | |
| #define ATTR_CFG_FLD_jitter_CFG config /* PMSIRR_EL1.RND */ | |
| #define ATTR_CFG_FLD_jitter_LO 16 | |
| #define ATTR_CFG_FLD_jitter_HI 16 | |
| #define ATTR_CFG_FLD_branch_filter_CFG config /* PMSFCR_EL1.B */ | |
| #define ATTR_CFG_FLD_branch_filter_LO 32 | |
| #define ATTR_CFG_FLD_branch_filter_HI 32 | |
| #define ATTR_CFG_FLD_load_filter_CFG config /* PMSFCR_EL1.LD */ | |
| #define ATTR_CFG_FLD_load_filter_LO 33 | |
| #define ATTR_CFG_FLD_load_filter_HI 33 | |
| #define ATTR_CFG_FLD_store_filter_CFG config /* PMSFCR_EL1.ST */ | |
| #define ATTR_CFG_FLD_store_filter_LO 34 | |
| #define ATTR_CFG_FLD_store_filter_HI 34 | |
| #define ATTR_CFG_FLD_discard_CFG config /* PMBLIMITR_EL1.FM = DISCARD */ | |
| #define ATTR_CFG_FLD_discard_LO 35 | |
| #define ATTR_CFG_FLD_discard_HI 35 | |
| #define ATTR_CFG_FLD_branch_filter_mask_CFG config /* PMSFCR_EL1.Bm */ | |
| #define ATTR_CFG_FLD_branch_filter_mask_LO 36 | |
| #define ATTR_CFG_FLD_branch_filter_mask_HI 36 | |
| #define ATTR_CFG_FLD_load_filter_mask_CFG config /* PMSFCR_EL1.LDm */ | |
| #define ATTR_CFG_FLD_load_filter_mask_LO 37 | |
| #define ATTR_CFG_FLD_load_filter_mask_HI 37 | |
| #define ATTR_CFG_FLD_store_filter_mask_CFG config /* PMSFCR_EL1.STm */ | |
| #define ATTR_CFG_FLD_store_filter_mask_LO 38 | |
| #define ATTR_CFG_FLD_store_filter_mask_HI 38 | |
| #define ATTR_CFG_FLD_simd_filter_CFG config /* PMSFCR_EL1.SIMD */ | |
| #define ATTR_CFG_FLD_simd_filter_LO 39 | |
| #define ATTR_CFG_FLD_simd_filter_HI 39 | |
| #define ATTR_CFG_FLD_simd_filter_mask_CFG config /* PMSFCR_EL1.SIMDm */ | |
| #define ATTR_CFG_FLD_simd_filter_mask_LO 40 | |
| #define ATTR_CFG_FLD_simd_filter_mask_HI 40 | |
| #define ATTR_CFG_FLD_float_filter_CFG config /* PMSFCR_EL1.FP */ | |
| #define ATTR_CFG_FLD_float_filter_LO 41 | |
| #define ATTR_CFG_FLD_float_filter_HI 41 | |
| #define ATTR_CFG_FLD_float_filter_mask_CFG config /* PMSFCR_EL1.FPm */ | |
| #define ATTR_CFG_FLD_float_filter_mask_LO 42 | |
| #define ATTR_CFG_FLD_float_filter_mask_HI 42 | |
| #define ATTR_CFG_FLD_event_filter_CFG config1 /* PMSEVFR_EL1 */ | |
| #define ATTR_CFG_FLD_event_filter_LO 0 | |
| #define ATTR_CFG_FLD_event_filter_HI 63 | |
| #define ATTR_CFG_FLD_min_latency_CFG config2 /* PMSLATFR_EL1.MINLAT */ | |
| #define ATTR_CFG_FLD_min_latency_LO 0 | |
| #define ATTR_CFG_FLD_min_latency_HI 11 | |
| #define ATTR_CFG_FLD_inv_event_filter_CFG config3 /* PMSNEVFR_EL1 */ | |
| #define ATTR_CFG_FLD_inv_event_filter_LO 0 | |
| #define ATTR_CFG_FLD_inv_event_filter_HI 63 | |
| #define ATTR_CFG_FLD_inv_data_src_filter_CFG config4 /* inverse of PMSDSFR_EL1 */ | |
| #define ATTR_CFG_FLD_inv_data_src_filter_LO 0 | |
| #define ATTR_CFG_FLD_inv_data_src_filter_HI 63 | |
| GEN_PMU_FORMAT_ATTR(ts_enable); | |
| GEN_PMU_FORMAT_ATTR(pa_enable); | |
| GEN_PMU_FORMAT_ATTR(pct_enable); | |
| GEN_PMU_FORMAT_ATTR(jitter); | |
| GEN_PMU_FORMAT_ATTR(branch_filter); | |
| GEN_PMU_FORMAT_ATTR(branch_filter_mask); | |
| GEN_PMU_FORMAT_ATTR(load_filter); | |
| GEN_PMU_FORMAT_ATTR(load_filter_mask); | |
| GEN_PMU_FORMAT_ATTR(store_filter); | |
| GEN_PMU_FORMAT_ATTR(store_filter_mask); | |
| GEN_PMU_FORMAT_ATTR(simd_filter); | |
| GEN_PMU_FORMAT_ATTR(simd_filter_mask); | |
| GEN_PMU_FORMAT_ATTR(float_filter); | |
| GEN_PMU_FORMAT_ATTR(float_filter_mask); | |
| GEN_PMU_FORMAT_ATTR(event_filter); | |
| GEN_PMU_FORMAT_ATTR(inv_event_filter); | |
| GEN_PMU_FORMAT_ATTR(inv_data_src_filter); | |
| GEN_PMU_FORMAT_ATTR(min_latency); | |
| GEN_PMU_FORMAT_ATTR(discard); | |
| static struct attribute *arm_spe_pmu_formats_attr[] = { | |
| &format_attr_ts_enable.attr, | |
| &format_attr_pa_enable.attr, | |
| &format_attr_pct_enable.attr, | |
| &format_attr_jitter.attr, | |
| &format_attr_branch_filter.attr, | |
| &format_attr_branch_filter_mask.attr, | |
| &format_attr_load_filter.attr, | |
| &format_attr_load_filter_mask.attr, | |
| &format_attr_store_filter.attr, | |
| &format_attr_store_filter_mask.attr, | |
| &format_attr_simd_filter.attr, | |
| &format_attr_simd_filter_mask.attr, | |
| &format_attr_float_filter.attr, | |
| &format_attr_float_filter_mask.attr, | |
| &format_attr_event_filter.attr, | |
| &format_attr_inv_event_filter.attr, | |
| &format_attr_inv_data_src_filter.attr, | |
| &format_attr_min_latency.attr, | |
| &format_attr_discard.attr, | |
| NULL, | |
| }; | |
| static umode_t arm_spe_pmu_format_attr_is_visible(struct kobject *kobj, | |
| struct attribute *attr, | |
| int unused) | |
| { | |
| struct device *dev = kobj_to_dev(kobj); | |
| struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev); | |
| if (attr == &format_attr_discard.attr && !(spe_pmu->features & SPE_PMU_FEAT_DISCARD)) | |
| return 0; | |
| if (attr == &format_attr_inv_event_filter.attr && !(spe_pmu->features & SPE_PMU_FEAT_INV_FILT_EVT)) | |
| return 0; | |
| if (attr == &format_attr_inv_data_src_filter.attr && | |
| !(spe_pmu->features & SPE_PMU_FEAT_FDS)) | |
| return 0; | |
| if ((attr == &format_attr_branch_filter_mask.attr || | |
| attr == &format_attr_load_filter_mask.attr || | |
| attr == &format_attr_store_filter_mask.attr || | |
| attr == &format_attr_simd_filter.attr || | |
| attr == &format_attr_simd_filter_mask.attr || | |
| attr == &format_attr_float_filter.attr || | |
| attr == &format_attr_float_filter_mask.attr) && | |
| !(spe_pmu->features & SPE_PMU_FEAT_EFT)) | |
| return 0; | |
| return attr->mode; | |
| } | |
| static const struct attribute_group arm_spe_pmu_format_group = { | |
| .name = "format", | |
| .is_visible = arm_spe_pmu_format_attr_is_visible, | |
| .attrs = arm_spe_pmu_formats_attr, | |
| }; | |
| static ssize_t cpumask_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct arm_spe_pmu *spe_pmu = dev_get_drvdata(dev); | |
| return sysfs_emit(buf, "%*pbl\n", cpumask_pr_args(&spe_pmu->supported_cpus)); | |
| } | |
| static DEVICE_ATTR_RO(cpumask); | |
| static struct attribute *arm_spe_pmu_attrs[] = { | |
| &dev_attr_cpumask.attr, | |
| NULL, | |
| }; | |
| static const struct attribute_group arm_spe_pmu_group = { | |
| .attrs = arm_spe_pmu_attrs, | |
| }; | |
| static const struct attribute_group *arm_spe_pmu_attr_groups[] = { | |
| &arm_spe_pmu_group, | |
| &arm_spe_pmu_cap_group, | |
| &arm_spe_pmu_format_group, | |
| NULL, | |
| }; | |
| /* Convert between user ABI and register values */ | |
| static u64 arm_spe_event_to_pmscr(struct perf_event *event) | |
| { | |
| struct perf_event_attr *attr = &event->attr; | |
| u64 reg = 0; | |
| reg |= FIELD_PREP(PMSCR_EL1_TS, ATTR_CFG_GET_FLD(attr, ts_enable)); | |
| reg |= FIELD_PREP(PMSCR_EL1_PA, ATTR_CFG_GET_FLD(attr, pa_enable)); | |
| reg |= FIELD_PREP(PMSCR_EL1_PCT, ATTR_CFG_GET_FLD(attr, pct_enable)); | |
| if (!attr->exclude_user) | |
| reg |= PMSCR_EL1_E0SPE; | |
| if (!attr->exclude_kernel) | |
| reg |= PMSCR_EL1_E1SPE; | |
| if (get_spe_event_has_cx(event)) | |
| reg |= PMSCR_EL1_CX; | |
| return reg; | |
| } | |
| static void arm_spe_event_sanitise_period(struct perf_event *event) | |
| { | |
| u64 period = event->hw.sample_period; | |
| u64 max_period = PMSIRR_EL1_INTERVAL_MASK; | |
| /* | |
| * The PMSIDR_EL1.Interval field (stored in spe_pmu->min_period) is a | |
| * recommendation for the minimum interval, not a hardware limitation. | |
| * | |
| * According to the Arm ARM (DDI 0487 L.a), section D24.7.12 PMSIRR_EL1, | |
| * Sampling Interval Reload Register, the INTERVAL field (bits [31:8]) | |
| * states: "Software must set this to a nonzero value". Use 1 as the | |
| * minimum value. | |
| */ | |
| u64 min_period = FIELD_PREP(PMSIRR_EL1_INTERVAL_MASK, 1); | |
| period = clamp_t(u64, period, min_period, max_period) & max_period; | |
| event->hw.sample_period = period; | |
| } | |
| static u64 arm_spe_event_to_pmsirr(struct perf_event *event) | |
| { | |
| struct perf_event_attr *attr = &event->attr; | |
| u64 reg = 0; | |
| arm_spe_event_sanitise_period(event); | |
| reg |= FIELD_PREP(PMSIRR_EL1_RND, ATTR_CFG_GET_FLD(attr, jitter)); | |
| reg |= event->hw.sample_period; | |
| return reg; | |
| } | |
| static u64 arm_spe_event_to_pmsfcr(struct perf_event *event) | |
| { | |
| struct perf_event_attr *attr = &event->attr; | |
| u64 reg = 0; | |
| reg |= FIELD_PREP(PMSFCR_EL1_LD, ATTR_CFG_GET_FLD(attr, load_filter)); | |
| reg |= FIELD_PREP(PMSFCR_EL1_LDm, ATTR_CFG_GET_FLD(attr, load_filter_mask)); | |
| reg |= FIELD_PREP(PMSFCR_EL1_ST, ATTR_CFG_GET_FLD(attr, store_filter)); | |
| reg |= FIELD_PREP(PMSFCR_EL1_STm, ATTR_CFG_GET_FLD(attr, store_filter_mask)); | |
| reg |= FIELD_PREP(PMSFCR_EL1_B, ATTR_CFG_GET_FLD(attr, branch_filter)); | |
| reg |= FIELD_PREP(PMSFCR_EL1_Bm, ATTR_CFG_GET_FLD(attr, branch_filter_mask)); | |
| reg |= FIELD_PREP(PMSFCR_EL1_SIMD, ATTR_CFG_GET_FLD(attr, simd_filter)); | |
| reg |= FIELD_PREP(PMSFCR_EL1_SIMDm, ATTR_CFG_GET_FLD(attr, simd_filter_mask)); | |
| reg |= FIELD_PREP(PMSFCR_EL1_FP, ATTR_CFG_GET_FLD(attr, float_filter)); | |
| reg |= FIELD_PREP(PMSFCR_EL1_FPm, ATTR_CFG_GET_FLD(attr, float_filter_mask)); | |
| if (reg) | |
| reg |= PMSFCR_EL1_FT; | |
| if (ATTR_CFG_GET_FLD(attr, event_filter)) | |
| reg |= PMSFCR_EL1_FE; | |
| if (ATTR_CFG_GET_FLD(attr, inv_event_filter)) | |
| reg |= PMSFCR_EL1_FnE; | |
| if (ATTR_CFG_GET_FLD(attr, inv_data_src_filter)) | |
| reg |= PMSFCR_EL1_FDS; | |
| if (ATTR_CFG_GET_FLD(attr, min_latency)) | |
| reg |= PMSFCR_EL1_FL; | |
| return reg; | |
| } | |
| static u64 arm_spe_event_to_pmsevfr(struct perf_event *event) | |
| { | |
| struct perf_event_attr *attr = &event->attr; | |
| return ATTR_CFG_GET_FLD(attr, event_filter); | |
| } | |
| static u64 arm_spe_event_to_pmsnevfr(struct perf_event *event) | |
| { | |
| struct perf_event_attr *attr = &event->attr; | |
| return ATTR_CFG_GET_FLD(attr, inv_event_filter); | |
| } | |
| static u64 arm_spe_event_to_pmslatfr(struct perf_event *event) | |
| { | |
| struct perf_event_attr *attr = &event->attr; | |
| return FIELD_PREP(PMSLATFR_EL1_MINLAT, ATTR_CFG_GET_FLD(attr, min_latency)); | |
| } | |
| static u64 arm_spe_event_to_pmsdsfr(struct perf_event *event) | |
| { | |
| struct perf_event_attr *attr = &event->attr; | |
| /* | |
| * Data src filter is inverted so that the default value of 0 is | |
| * equivalent to no filtering. | |
| */ | |
| return ~ATTR_CFG_GET_FLD(attr, inv_data_src_filter); | |
| } | |
| static void arm_spe_pmu_pad_buf(struct perf_output_handle *handle, int len) | |
| { | |
| struct arm_spe_pmu_buf *buf = perf_get_aux(handle); | |
| u64 head = PERF_IDX2OFF(handle->head, buf); | |
| memset(buf->base + head, ARM_SPE_BUF_PAD_BYTE, len); | |
| if (!buf->snapshot) | |
| perf_aux_output_skip(handle, len); | |
| } | |
| static u64 arm_spe_pmu_next_snapshot_off(struct perf_output_handle *handle) | |
| { | |
| struct arm_spe_pmu_buf *buf = perf_get_aux(handle); | |
| struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu); | |
| u64 head = PERF_IDX2OFF(handle->head, buf); | |
| u64 limit = buf->nr_pages * PAGE_SIZE; | |
| /* | |
| * The trace format isn't parseable in reverse, so clamp | |
| * the limit to half of the buffer size in snapshot mode | |
| * so that the worst case is half a buffer of records, as | |
| * opposed to a single record. | |
| */ | |
| if (head < limit >> 1) | |
| limit >>= 1; | |
| /* | |
| * If we're within max_record_sz of the limit, we must | |
| * pad, move the head index and recompute the limit. | |
| */ | |
| if (limit - head < spe_pmu->max_record_sz) { | |
| arm_spe_pmu_pad_buf(handle, limit - head); | |
| handle->head = PERF_IDX2OFF(limit, buf); | |
| limit = ((buf->nr_pages * PAGE_SIZE) >> 1) + handle->head; | |
| } | |
| return limit; | |
| } | |
| static u64 __arm_spe_pmu_next_off(struct perf_output_handle *handle) | |
| { | |
| struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu); | |
| struct arm_spe_pmu_buf *buf = perf_get_aux(handle); | |
| const u64 bufsize = buf->nr_pages * PAGE_SIZE; | |
| u64 limit = bufsize; | |
| u64 head, tail, wakeup; | |
| /* | |
| * The head can be misaligned for two reasons: | |
| * | |
| * 1. The hardware left PMBPTR pointing to the first byte after | |
| * a record when generating a buffer management event. | |
| * | |
| * 2. We used perf_aux_output_skip to consume handle->size bytes | |
| * and CIRC_SPACE was used to compute the size, which always | |
| * leaves one entry free. | |
| * | |
| * Deal with this by padding to the next alignment boundary and | |
| * moving the head index. If we run out of buffer space, we'll | |
| * reduce handle->size to zero and end up reporting truncation. | |
| */ | |
| head = PERF_IDX2OFF(handle->head, buf); | |
| if (!IS_ALIGNED(head, spe_pmu->align)) { | |
| unsigned long delta = roundup(head, spe_pmu->align) - head; | |
| delta = min(delta, handle->size); | |
| arm_spe_pmu_pad_buf(handle, delta); | |
| head = PERF_IDX2OFF(handle->head, buf); | |
| } | |
| /* If we've run out of free space, then nothing more to do */ | |
| if (!handle->size) | |
| goto no_space; | |
| /* Compute the tail and wakeup indices now that we've aligned head */ | |
| tail = PERF_IDX2OFF(handle->head + handle->size, buf); | |
| wakeup = PERF_IDX2OFF(handle->wakeup, buf); | |
| /* | |
| * Avoid clobbering unconsumed data. We know we have space, so | |
| * if we see head == tail we know that the buffer is empty. If | |
| * head > tail, then there's nothing to clobber prior to | |
| * wrapping. | |
| */ | |
| if (head < tail) | |
| limit = round_down(tail, PAGE_SIZE); | |
| /* | |
| * Wakeup may be arbitrarily far into the future. If it's not in | |
| * the current generation, either we'll wrap before hitting it, | |
| * or it's in the past and has been handled already. | |
| * | |
| * If there's a wakeup before we wrap, arrange to be woken up by | |
| * the page boundary following it. Keep the tail boundary if | |
| * that's lower. | |
| */ | |
| if ((handle->wakeup - handle->head) < handle->size && head <= wakeup) | |
| limit = min(limit, round_up(wakeup, PAGE_SIZE)); | |
| if (limit > head) | |
| return limit; | |
| arm_spe_pmu_pad_buf(handle, handle->size); | |
| no_space: | |
| perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED); | |
| perf_aux_output_end(handle, 0); | |
| return 0; | |
| } | |
| static u64 arm_spe_pmu_next_off(struct perf_output_handle *handle) | |
| { | |
| struct arm_spe_pmu_buf *buf = perf_get_aux(handle); | |
| struct arm_spe_pmu *spe_pmu = to_spe_pmu(handle->event->pmu); | |
| u64 limit = __arm_spe_pmu_next_off(handle); | |
| u64 head = PERF_IDX2OFF(handle->head, buf); | |
| /* | |
| * If the head has come too close to the end of the buffer, | |
| * then pad to the end and recompute the limit. | |
| */ | |
| if (limit && (limit - head < spe_pmu->max_record_sz)) { | |
| arm_spe_pmu_pad_buf(handle, limit - head); | |
| limit = __arm_spe_pmu_next_off(handle); | |
| } | |
| return limit; | |
| } | |
| static int arm_spe_perf_aux_output_begin(struct perf_output_handle *handle, | |
| struct perf_event *event) | |
| { | |
| u64 base, limit; | |
| struct arm_spe_pmu_buf *buf; | |
| if (ATTR_CFG_GET_FLD(&event->attr, discard)) { | |
| limit = FIELD_PREP(PMBLIMITR_EL1_FM, PMBLIMITR_EL1_FM_DISCARD); | |
| limit |= PMBLIMITR_EL1_E; | |
| goto out_write_limit; | |
| } | |
| /* Start a new aux session */ | |
| buf = perf_aux_output_begin(handle, event); | |
| if (!buf) { | |
| /* | |
| * We still need to clear the limit pointer, since the | |
| * profiler might only be disabled by virtue of a fault. | |
| */ | |
| limit = 0; | |
| goto out_write_limit; | |
| } | |
| limit = buf->snapshot ? arm_spe_pmu_next_snapshot_off(handle) | |
| : arm_spe_pmu_next_off(handle); | |
| if (limit) | |
| limit |= PMBLIMITR_EL1_E; | |
| limit += (u64)buf->base; | |
| base = (u64)buf->base + PERF_IDX2OFF(handle->head, buf); | |
| write_sysreg_s(base, SYS_PMBPTR_EL1); | |
| out_write_limit: | |
| write_sysreg_s(limit, SYS_PMBLIMITR_EL1); | |
| return (limit & PMBLIMITR_EL1_E) ? 0 : -EIO; | |
| } | |
| static void arm_spe_perf_aux_output_end(struct perf_output_handle *handle) | |
| { | |
| struct arm_spe_pmu_buf *buf = perf_get_aux(handle); | |
| u64 offset, size; | |
| offset = read_sysreg_s(SYS_PMBPTR_EL1) - (u64)buf->base; | |
| size = offset - PERF_IDX2OFF(handle->head, buf); | |
| if (buf->snapshot) | |
| handle->head = offset; | |
| perf_aux_output_end(handle, size); | |
| } | |
| static void arm_spe_pmu_disable_and_drain_local(void) | |
| { | |
| /* Disable profiling at EL0 and EL1 */ | |
| write_sysreg_s(0, SYS_PMSCR_EL1); | |
| isb(); | |
| /* Drain any buffered data */ | |
| psb_csync(); | |
| dsb(nsh); | |
| /* Disable the profiling buffer */ | |
| write_sysreg_s(0, SYS_PMBLIMITR_EL1); | |
| isb(); | |
| } | |
| /* IRQ handling */ | |
| static enum arm_spe_pmu_buf_fault_action | |
| arm_spe_pmu_buf_get_fault_act(struct perf_output_handle *handle) | |
| { | |
| const char *err_str; | |
| u64 pmbsr; | |
| enum arm_spe_pmu_buf_fault_action ret; | |
| /* | |
| * Ensure new profiling data is visible to the CPU and any external | |
| * aborts have been resolved. | |
| */ | |
| psb_csync(); | |
| dsb(nsh); | |
| /* Ensure hardware updates to PMBPTR_EL1 are visible */ | |
| isb(); | |
| /* Service required? */ | |
| pmbsr = read_sysreg_s(SYS_PMBSR_EL1); | |
| if (!FIELD_GET(PMBSR_EL1_S, pmbsr)) | |
| return SPE_PMU_BUF_FAULT_ACT_SPURIOUS; | |
| /* | |
| * If we've lost data, disable profiling and also set the PARTIAL | |
| * flag to indicate that the last record is corrupted. | |
| */ | |
| if (FIELD_GET(PMBSR_EL1_DL, pmbsr)) | |
| perf_aux_output_flag(handle, PERF_AUX_FLAG_TRUNCATED | | |
| PERF_AUX_FLAG_PARTIAL); | |
| /* Report collisions to userspace so that it can up the period */ | |
| if (FIELD_GET(PMBSR_EL1_COLL, pmbsr)) | |
| perf_aux_output_flag(handle, PERF_AUX_FLAG_COLLISION); | |
| /* We only expect buffer management events */ | |
| switch (FIELD_GET(PMBSR_EL1_EC, pmbsr)) { | |
| case PMBSR_EL1_EC_BUF: | |
| /* Handled below */ | |
| break; | |
| case PMBSR_EL1_EC_FAULT_S1: | |
| case PMBSR_EL1_EC_FAULT_S2: | |
| err_str = "Unexpected buffer fault"; | |
| goto out_err; | |
| default: | |
| err_str = "Unknown error code"; | |
| goto out_err; | |
| } | |
| /* Buffer management event */ | |
| switch (FIELD_GET(PMBSR_EL1_BUF_BSC_MASK, pmbsr)) { | |
| case PMBSR_EL1_BUF_BSC_FULL: | |
| ret = SPE_PMU_BUF_FAULT_ACT_OK; | |
| goto out_stop; | |
| default: | |
| err_str = "Unknown buffer status code"; | |
| } | |
| out_err: | |
| pr_err_ratelimited("%s on CPU %d [PMBSR=0x%016llx, PMBPTR=0x%016llx, PMBLIMITR=0x%016llx]\n", | |
| err_str, smp_processor_id(), pmbsr, | |
| read_sysreg_s(SYS_PMBPTR_EL1), | |
| read_sysreg_s(SYS_PMBLIMITR_EL1)); | |
| ret = SPE_PMU_BUF_FAULT_ACT_FATAL; | |
| out_stop: | |
| arm_spe_perf_aux_output_end(handle); | |
| return ret; | |
| } | |
| static irqreturn_t arm_spe_pmu_irq_handler(int irq, void *dev) | |
| { | |
| struct perf_output_handle *handle = dev; | |
| struct perf_event *event = handle->event; | |
| enum arm_spe_pmu_buf_fault_action act; | |
| if (!perf_get_aux(handle)) | |
| return IRQ_NONE; | |
| act = arm_spe_pmu_buf_get_fault_act(handle); | |
| if (act == SPE_PMU_BUF_FAULT_ACT_SPURIOUS) | |
| return IRQ_NONE; | |
| /* | |
| * Ensure perf callbacks have completed, which may disable the | |
| * profiling buffer in response to a TRUNCATION flag. | |
| */ | |
| irq_work_run(); | |
| switch (act) { | |
| case SPE_PMU_BUF_FAULT_ACT_FATAL: | |
| /* | |
| * If a fatal exception occurred then leaving the profiling | |
| * buffer enabled is a recipe waiting to happen. Since | |
| * fatal faults don't always imply truncation, make sure | |
| * that the profiling buffer is disabled explicitly before | |
| * clearing the syndrome register. | |
| */ | |
| arm_spe_pmu_disable_and_drain_local(); | |
| break; | |
| case SPE_PMU_BUF_FAULT_ACT_OK: | |
| /* | |
| * We handled the fault (the buffer was full), so resume | |
| * profiling as long as we didn't detect truncation. | |
| * PMBPTR might be misaligned, but we'll burn that bridge | |
| * when we get to it. | |
| */ | |
| if (!(handle->aux_flags & PERF_AUX_FLAG_TRUNCATED)) { | |
| if (arm_spe_perf_aux_output_begin(handle, event)) { | |
| arm_spe_pmu_stop(event, PERF_EF_UPDATE); | |
| break; | |
| } | |
| isb(); | |
| } | |
| break; | |
| case SPE_PMU_BUF_FAULT_ACT_SPURIOUS: | |
| /* We've seen you before, but GCC has the memory of a sieve. */ | |
| break; | |
| } | |
| /* The buffer pointers are now sane, so resume profiling. */ | |
| write_sysreg_s(0, SYS_PMBSR_EL1); | |
| return IRQ_HANDLED; | |
| } | |
| /* Perf callbacks */ | |
| static int arm_spe_pmu_event_init(struct perf_event *event) | |
| { | |
| u64 reg; | |
| struct perf_event_attr *attr = &event->attr; | |
| struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu); | |
| /* This is, of course, deeply driver-specific */ | |
| if (attr->type != event->pmu->type) | |
| return -ENOENT; | |
| if (event->cpu >= 0 && | |
| !cpumask_test_cpu(event->cpu, &spe_pmu->supported_cpus)) | |
| return -ENOENT; | |
| if (arm_spe_event_to_pmsevfr(event) & spe_pmu->pmsevfr_res0) | |
| return -EOPNOTSUPP; | |
| if (arm_spe_event_to_pmsnevfr(event) & spe_pmu->pmsevfr_res0) | |
| return -EOPNOTSUPP; | |
| if (arm_spe_event_to_pmsdsfr(event) != U64_MAX && | |
| !(spe_pmu->features & SPE_PMU_FEAT_FDS)) | |
| return -EOPNOTSUPP; | |
| if (attr->exclude_idle) | |
| return -EOPNOTSUPP; | |
| /* | |
| * Feedback-directed frequency throttling doesn't work when we | |
| * have a buffer of samples. We'd need to manually count the | |
| * samples in the buffer when it fills up and adjust the event | |
| * count to reflect that. Instead, just force the user to specify | |
| * a sample period. | |
| */ | |
| if (attr->freq) | |
| return -EINVAL; | |
| reg = arm_spe_event_to_pmsfcr(event); | |
| if ((FIELD_GET(PMSFCR_EL1_FE, reg)) && | |
| !(spe_pmu->features & SPE_PMU_FEAT_FILT_EVT)) | |
| return -EOPNOTSUPP; | |
| if ((FIELD_GET(PMSFCR_EL1_FnE, reg)) && | |
| !(spe_pmu->features & SPE_PMU_FEAT_INV_FILT_EVT)) | |
| return -EOPNOTSUPP; | |
| if ((FIELD_GET(PMSFCR_EL1_FT, reg)) && | |
| !(spe_pmu->features & SPE_PMU_FEAT_FILT_TYP)) | |
| return -EOPNOTSUPP; | |
| if ((FIELD_GET(PMSFCR_EL1_FL, reg)) && | |
| !(spe_pmu->features & SPE_PMU_FEAT_FILT_LAT)) | |
| return -EOPNOTSUPP; | |
| if ((FIELD_GET(PMSFCR_EL1_LDm, reg) || | |
| FIELD_GET(PMSFCR_EL1_STm, reg) || | |
| FIELD_GET(PMSFCR_EL1_Bm, reg) || | |
| FIELD_GET(PMSFCR_EL1_SIMD, reg) || | |
| FIELD_GET(PMSFCR_EL1_SIMDm, reg) || | |
| FIELD_GET(PMSFCR_EL1_FP, reg) || | |
| FIELD_GET(PMSFCR_EL1_FPm, reg)) && | |
| !(spe_pmu->features & SPE_PMU_FEAT_EFT)) | |
| return -EOPNOTSUPP; | |
| if (ATTR_CFG_GET_FLD(&event->attr, discard) && | |
| !(spe_pmu->features & SPE_PMU_FEAT_DISCARD)) | |
| return -EOPNOTSUPP; | |
| set_spe_event_has_cx(event); | |
| reg = arm_spe_event_to_pmscr(event); | |
| if (reg & (PMSCR_EL1_PA | PMSCR_EL1_PCT)) | |
| return perf_allow_kernel(); | |
| return 0; | |
| } | |
| static void arm_spe_pmu_start(struct perf_event *event, int flags) | |
| { | |
| u64 reg; | |
| struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu); | |
| struct hw_perf_event *hwc = &event->hw; | |
| struct perf_output_handle *handle = this_cpu_ptr(spe_pmu->handle); | |
| hwc->state = 0; | |
| if (arm_spe_perf_aux_output_begin(handle, event)) { | |
| arm_spe_pmu_stop(event, 0); | |
| return; | |
| } | |
| reg = arm_spe_event_to_pmsfcr(event); | |
| write_sysreg_s(reg, SYS_PMSFCR_EL1); | |
| reg = arm_spe_event_to_pmsevfr(event); | |
| write_sysreg_s(reg, SYS_PMSEVFR_EL1); | |
| if (spe_pmu->features & SPE_PMU_FEAT_INV_FILT_EVT) { | |
| reg = arm_spe_event_to_pmsnevfr(event); | |
| write_sysreg_s(reg, SYS_PMSNEVFR_EL1); | |
| } | |
| if (spe_pmu->features & SPE_PMU_FEAT_FDS) { | |
| reg = arm_spe_event_to_pmsdsfr(event); | |
| write_sysreg_s(reg, SYS_PMSDSFR_EL1); | |
| } | |
| reg = arm_spe_event_to_pmslatfr(event); | |
| write_sysreg_s(reg, SYS_PMSLATFR_EL1); | |
| if (flags & PERF_EF_RELOAD) { | |
| reg = arm_spe_event_to_pmsirr(event); | |
| write_sysreg_s(reg, SYS_PMSIRR_EL1); | |
| isb(); | |
| reg = local64_read(&hwc->period_left); | |
| write_sysreg_s(reg, SYS_PMSICR_EL1); | |
| } | |
| reg = arm_spe_event_to_pmscr(event); | |
| isb(); | |
| write_sysreg_s(reg, SYS_PMSCR_EL1); | |
| } | |
| static void arm_spe_pmu_stop(struct perf_event *event, int flags) | |
| { | |
| struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu); | |
| struct hw_perf_event *hwc = &event->hw; | |
| struct perf_output_handle *handle = this_cpu_ptr(spe_pmu->handle); | |
| /* If we're already stopped, then nothing to do */ | |
| if (hwc->state & PERF_HES_STOPPED) | |
| return; | |
| /* Stop all trace generation */ | |
| arm_spe_pmu_disable_and_drain_local(); | |
| if (flags & PERF_EF_UPDATE) { | |
| /* | |
| * If there's a fault pending then ensure we contain it | |
| * to this buffer, since we might be on the context-switch | |
| * path. | |
| */ | |
| if (perf_get_aux(handle)) { | |
| enum arm_spe_pmu_buf_fault_action act; | |
| act = arm_spe_pmu_buf_get_fault_act(handle); | |
| if (act == SPE_PMU_BUF_FAULT_ACT_SPURIOUS) | |
| arm_spe_perf_aux_output_end(handle); | |
| else | |
| write_sysreg_s(0, SYS_PMBSR_EL1); | |
| } | |
| /* | |
| * This may also contain ECOUNT, but nobody else should | |
| * be looking at period_left, since we forbid frequency | |
| * based sampling. | |
| */ | |
| local64_set(&hwc->period_left, read_sysreg_s(SYS_PMSICR_EL1)); | |
| hwc->state |= PERF_HES_UPTODATE; | |
| } | |
| hwc->state |= PERF_HES_STOPPED; | |
| } | |
| static int arm_spe_pmu_add(struct perf_event *event, int flags) | |
| { | |
| int ret = 0; | |
| struct arm_spe_pmu *spe_pmu = to_spe_pmu(event->pmu); | |
| struct hw_perf_event *hwc = &event->hw; | |
| int cpu = event->cpu == -1 ? smp_processor_id() : event->cpu; | |
| if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus)) | |
| return -ENOENT; | |
| hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED; | |
| if (flags & PERF_EF_START) { | |
| arm_spe_pmu_start(event, PERF_EF_RELOAD); | |
| if (hwc->state & PERF_HES_STOPPED) | |
| ret = -EINVAL; | |
| } | |
| return ret; | |
| } | |
| static void arm_spe_pmu_del(struct perf_event *event, int flags) | |
| { | |
| arm_spe_pmu_stop(event, PERF_EF_UPDATE); | |
| } | |
| static void arm_spe_pmu_read(struct perf_event *event) | |
| { | |
| } | |
| static void *arm_spe_pmu_setup_aux(struct perf_event *event, void **pages, | |
| int nr_pages, bool snapshot) | |
| { | |
| int i, cpu = event->cpu; | |
| struct page **pglist; | |
| struct arm_spe_pmu_buf *buf; | |
| /* We need at least two pages for this to work. */ | |
| if (nr_pages < 2) | |
| return NULL; | |
| /* | |
| * We require an even number of pages for snapshot mode, so that | |
| * we can effectively treat the buffer as consisting of two equal | |
| * parts and give userspace a fighting chance of getting some | |
| * useful data out of it. | |
| */ | |
| if (snapshot && (nr_pages & 1)) | |
| return NULL; | |
| if (cpu == -1) | |
| cpu = raw_smp_processor_id(); | |
| buf = kzalloc_node(sizeof(*buf), GFP_KERNEL, cpu_to_node(cpu)); | |
| if (!buf) | |
| return NULL; | |
| pglist = kzalloc_objs(*pglist, nr_pages); | |
| if (!pglist) | |
| goto out_free_buf; | |
| for (i = 0; i < nr_pages; ++i) | |
| pglist[i] = virt_to_page(pages[i]); | |
| buf->base = vmap(pglist, nr_pages, VM_MAP, PAGE_KERNEL); | |
| if (!buf->base) | |
| goto out_free_pglist; | |
| buf->nr_pages = nr_pages; | |
| buf->snapshot = snapshot; | |
| kfree(pglist); | |
| return buf; | |
| out_free_pglist: | |
| kfree(pglist); | |
| out_free_buf: | |
| kfree(buf); | |
| return NULL; | |
| } | |
| static void arm_spe_pmu_free_aux(void *aux) | |
| { | |
| struct arm_spe_pmu_buf *buf = aux; | |
| vunmap(buf->base); | |
| kfree(buf); | |
| } | |
| /* Initialisation and teardown functions */ | |
| static int arm_spe_pmu_perf_init(struct arm_spe_pmu *spe_pmu) | |
| { | |
| static atomic_t pmu_idx = ATOMIC_INIT(-1); | |
| int idx; | |
| char *name; | |
| struct device *dev = &spe_pmu->pdev->dev; | |
| spe_pmu->pmu = (struct pmu) { | |
| .module = THIS_MODULE, | |
| .parent = &spe_pmu->pdev->dev, | |
| .capabilities = PERF_PMU_CAP_EXCLUSIVE | PERF_PMU_CAP_ITRACE, | |
| .attr_groups = arm_spe_pmu_attr_groups, | |
| /* | |
| * We hitch a ride on the software context here, so that | |
| * we can support per-task profiling (which is not possible | |
| * with the invalid context as it doesn't get sched callbacks). | |
| * This requires that userspace either uses a dummy event for | |
| * perf_event_open, since the aux buffer is not setup until | |
| * a subsequent mmap, or creates the profiling event in a | |
| * disabled state and explicitly PERF_EVENT_IOC_ENABLEs it | |
| * once the buffer has been created. | |
| */ | |
| .task_ctx_nr = perf_sw_context, | |
| .event_init = arm_spe_pmu_event_init, | |
| .add = arm_spe_pmu_add, | |
| .del = arm_spe_pmu_del, | |
| .start = arm_spe_pmu_start, | |
| .stop = arm_spe_pmu_stop, | |
| .read = arm_spe_pmu_read, | |
| .setup_aux = arm_spe_pmu_setup_aux, | |
| .free_aux = arm_spe_pmu_free_aux, | |
| }; | |
| idx = atomic_inc_return(&pmu_idx); | |
| name = devm_kasprintf(dev, GFP_KERNEL, "%s_%d", PMUNAME, idx); | |
| if (!name) { | |
| dev_err(dev, "failed to allocate name for pmu %d\n", idx); | |
| return -ENOMEM; | |
| } | |
| return perf_pmu_register(&spe_pmu->pmu, name, -1); | |
| } | |
| static void arm_spe_pmu_perf_destroy(struct arm_spe_pmu *spe_pmu) | |
| { | |
| perf_pmu_unregister(&spe_pmu->pmu); | |
| } | |
| static void __arm_spe_pmu_dev_probe(void *info) | |
| { | |
| int fld; | |
| u64 reg; | |
| struct arm_spe_pmu *spe_pmu = info; | |
| struct device *dev = &spe_pmu->pdev->dev; | |
| fld = cpuid_feature_extract_unsigned_field(read_cpuid(ID_AA64DFR0_EL1), | |
| ID_AA64DFR0_EL1_PMSVer_SHIFT); | |
| if (!fld) { | |
| dev_err(dev, | |
| "unsupported ID_AA64DFR0_EL1.PMSVer [%d] on CPU %d\n", | |
| fld, smp_processor_id()); | |
| return; | |
| } | |
| spe_pmu->pmsver = (u16)fld; | |
| /* Read PMBIDR first to determine whether or not we have access */ | |
| reg = read_sysreg_s(SYS_PMBIDR_EL1); | |
| if (FIELD_GET(PMBIDR_EL1_P, reg)) { | |
| dev_err(dev, | |
| "profiling buffer owned by higher exception level\n"); | |
| return; | |
| } | |
| /* Minimum alignment. If it's out-of-range, then fail the probe */ | |
| fld = FIELD_GET(PMBIDR_EL1_ALIGN, reg); | |
| spe_pmu->align = 1 << fld; | |
| if (spe_pmu->align > SZ_2K) { | |
| dev_err(dev, "unsupported PMBIDR.Align [%d] on CPU %d\n", | |
| fld, smp_processor_id()); | |
| return; | |
| } | |
| /* It's now safe to read PMSIDR and figure out what we've got */ | |
| reg = read_sysreg_s(SYS_PMSIDR_EL1); | |
| if (FIELD_GET(PMSIDR_EL1_FE, reg)) | |
| spe_pmu->features |= SPE_PMU_FEAT_FILT_EVT; | |
| if (FIELD_GET(PMSIDR_EL1_FnE, reg)) | |
| spe_pmu->features |= SPE_PMU_FEAT_INV_FILT_EVT; | |
| if (FIELD_GET(PMSIDR_EL1_FT, reg)) | |
| spe_pmu->features |= SPE_PMU_FEAT_FILT_TYP; | |
| if (FIELD_GET(PMSIDR_EL1_FL, reg)) | |
| spe_pmu->features |= SPE_PMU_FEAT_FILT_LAT; | |
| if (FIELD_GET(PMSIDR_EL1_ARCHINST, reg)) | |
| spe_pmu->features |= SPE_PMU_FEAT_ARCH_INST; | |
| if (FIELD_GET(PMSIDR_EL1_LDS, reg)) | |
| spe_pmu->features |= SPE_PMU_FEAT_LDS; | |
| if (FIELD_GET(PMSIDR_EL1_ERND, reg)) | |
| spe_pmu->features |= SPE_PMU_FEAT_ERND; | |
| if (spe_pmu->pmsver >= ID_AA64DFR0_EL1_PMSVer_V1P2) | |
| spe_pmu->features |= SPE_PMU_FEAT_DISCARD; | |
| if (FIELD_GET(PMSIDR_EL1_EFT, reg)) | |
| spe_pmu->features |= SPE_PMU_FEAT_EFT; | |
| if (FIELD_GET(PMSIDR_EL1_FDS, reg)) | |
| spe_pmu->features |= SPE_PMU_FEAT_FDS; | |
| /* This field has a spaced out encoding, so just use a look-up */ | |
| fld = FIELD_GET(PMSIDR_EL1_INTERVAL, reg); | |
| switch (fld) { | |
| case PMSIDR_EL1_INTERVAL_256: | |
| spe_pmu->min_period = 256; | |
| break; | |
| case PMSIDR_EL1_INTERVAL_512: | |
| spe_pmu->min_period = 512; | |
| break; | |
| case PMSIDR_EL1_INTERVAL_768: | |
| spe_pmu->min_period = 768; | |
| break; | |
| case PMSIDR_EL1_INTERVAL_1024: | |
| spe_pmu->min_period = 1024; | |
| break; | |
| case PMSIDR_EL1_INTERVAL_1536: | |
| spe_pmu->min_period = 1536; | |
| break; | |
| case PMSIDR_EL1_INTERVAL_2048: | |
| spe_pmu->min_period = 2048; | |
| break; | |
| case PMSIDR_EL1_INTERVAL_3072: | |
| spe_pmu->min_period = 3072; | |
| break; | |
| default: | |
| dev_warn(dev, "unknown PMSIDR_EL1.Interval [%d]; assuming 8\n", | |
| fld); | |
| fallthrough; | |
| case PMSIDR_EL1_INTERVAL_4096: | |
| spe_pmu->min_period = 4096; | |
| } | |
| /* Maximum record size. If it's out-of-range, then fail the probe */ | |
| fld = FIELD_GET(PMSIDR_EL1_MAXSIZE, reg); | |
| spe_pmu->max_record_sz = 1 << fld; | |
| if (spe_pmu->max_record_sz > SZ_2K || spe_pmu->max_record_sz < 16) { | |
| dev_err(dev, "unsupported PMSIDR_EL1.MaxSize [%d] on CPU %d\n", | |
| fld, smp_processor_id()); | |
| return; | |
| } | |
| fld = FIELD_GET(PMSIDR_EL1_COUNTSIZE, reg); | |
| switch (fld) { | |
| default: | |
| dev_warn(dev, "unknown PMSIDR_EL1.CountSize [%d]; assuming 2\n", | |
| fld); | |
| fallthrough; | |
| case PMSIDR_EL1_COUNTSIZE_12_BIT_SAT: | |
| spe_pmu->counter_sz = 12; | |
| break; | |
| case PMSIDR_EL1_COUNTSIZE_16_BIT_SAT: | |
| spe_pmu->counter_sz = 16; | |
| } | |
| /* Write all 1s and then read back. Unsupported filter bits are RAZ/WI. */ | |
| write_sysreg_s(U64_MAX, SYS_PMSEVFR_EL1); | |
| spe_pmu->pmsevfr_res0 = ~read_sysreg_s(SYS_PMSEVFR_EL1); | |
| dev_info(dev, | |
| "probed SPEv1.%d for CPUs %*pbl [max_record_sz %u, align %u, features 0x%llx]\n", | |
| spe_pmu->pmsver - 1, cpumask_pr_args(&spe_pmu->supported_cpus), | |
| spe_pmu->max_record_sz, spe_pmu->align, spe_pmu->features); | |
| spe_pmu->features |= SPE_PMU_FEAT_DEV_PROBED; | |
| } | |
| static void __arm_spe_pmu_reset_local(void) | |
| { | |
| /* | |
| * This is probably overkill, as we have no idea where we're | |
| * draining any buffered data to... | |
| */ | |
| arm_spe_pmu_disable_and_drain_local(); | |
| /* Reset the buffer base pointer */ | |
| write_sysreg_s(0, SYS_PMBPTR_EL1); | |
| isb(); | |
| /* Clear any pending management interrupts */ | |
| write_sysreg_s(0, SYS_PMBSR_EL1); | |
| isb(); | |
| } | |
| static void __arm_spe_pmu_setup_one(void *info) | |
| { | |
| struct arm_spe_pmu *spe_pmu = info; | |
| __arm_spe_pmu_reset_local(); | |
| enable_percpu_irq(spe_pmu->irq, IRQ_TYPE_NONE); | |
| } | |
| static void __arm_spe_pmu_stop_one(void *info) | |
| { | |
| struct arm_spe_pmu *spe_pmu = info; | |
| disable_percpu_irq(spe_pmu->irq); | |
| __arm_spe_pmu_reset_local(); | |
| } | |
| static int arm_spe_pmu_cpu_startup(unsigned int cpu, struct hlist_node *node) | |
| { | |
| struct arm_spe_pmu *spe_pmu; | |
| spe_pmu = hlist_entry_safe(node, struct arm_spe_pmu, hotplug_node); | |
| if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus)) | |
| return 0; | |
| __arm_spe_pmu_setup_one(spe_pmu); | |
| return 0; | |
| } | |
| static int arm_spe_pmu_cpu_teardown(unsigned int cpu, struct hlist_node *node) | |
| { | |
| struct arm_spe_pmu *spe_pmu; | |
| spe_pmu = hlist_entry_safe(node, struct arm_spe_pmu, hotplug_node); | |
| if (!cpumask_test_cpu(cpu, &spe_pmu->supported_cpus)) | |
| return 0; | |
| __arm_spe_pmu_stop_one(spe_pmu); | |
| return 0; | |
| } | |
| static int arm_spe_pmu_dev_init(struct arm_spe_pmu *spe_pmu) | |
| { | |
| int ret; | |
| cpumask_t *mask = &spe_pmu->supported_cpus; | |
| /* Make sure we probe the hardware on a relevant CPU */ | |
| ret = smp_call_function_any(mask, __arm_spe_pmu_dev_probe, spe_pmu, 1); | |
| if (ret || !(spe_pmu->features & SPE_PMU_FEAT_DEV_PROBED)) | |
| return -ENXIO; | |
| /* Request our PPIs (note that the IRQ is still disabled) */ | |
| ret = request_percpu_irq_affinity(spe_pmu->irq, arm_spe_pmu_irq_handler, | |
| DRVNAME, mask, spe_pmu->handle); | |
| if (ret) | |
| return ret; | |
| /* | |
| * Register our hotplug notifier now so we don't miss any events. | |
| * This will enable the IRQ for any supported CPUs that are already | |
| * up. | |
| */ | |
| ret = cpuhp_state_add_instance(arm_spe_pmu_online, | |
| &spe_pmu->hotplug_node); | |
| if (ret) | |
| free_percpu_irq(spe_pmu->irq, spe_pmu->handle); | |
| return ret; | |
| } | |
| static void arm_spe_pmu_dev_teardown(struct arm_spe_pmu *spe_pmu) | |
| { | |
| cpuhp_state_remove_instance(arm_spe_pmu_online, &spe_pmu->hotplug_node); | |
| free_percpu_irq(spe_pmu->irq, spe_pmu->handle); | |
| } | |
| /* Driver and device probing */ | |
| static int arm_spe_pmu_irq_probe(struct arm_spe_pmu *spe_pmu) | |
| { | |
| struct platform_device *pdev = spe_pmu->pdev; | |
| const struct cpumask *affinity; | |
| int irq; | |
| irq = platform_get_irq_affinity(pdev, 0, &affinity); | |
| if (irq < 0) | |
| return -ENXIO; | |
| if (!irq_is_percpu(irq)) { | |
| dev_err(&pdev->dev, "expected PPI but got SPI (%d)\n", irq); | |
| return -EINVAL; | |
| } | |
| cpumask_copy(&spe_pmu->supported_cpus, affinity); | |
| spe_pmu->irq = irq; | |
| return 0; | |
| } | |
| static const struct of_device_id arm_spe_pmu_of_match[] = { | |
| { .compatible = "arm,statistical-profiling-extension-v1", .data = (void *)1 }, | |
| { /* Sentinel */ }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, arm_spe_pmu_of_match); | |
| static const struct platform_device_id arm_spe_match[] = { | |
| { ARMV8_SPE_PDEV_NAME, 0}, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(platform, arm_spe_match); | |
| static int arm_spe_pmu_device_probe(struct platform_device *pdev) | |
| { | |
| int ret; | |
| struct arm_spe_pmu *spe_pmu; | |
| struct device *dev = &pdev->dev; | |
| /* | |
| * If kernelspace is unmapped when running at EL0, then the SPE | |
| * buffer will fault and prematurely terminate the AUX session. | |
| */ | |
| if (arm64_kernel_unmapped_at_el0()) { | |
| dev_warn_once(dev, "profiling buffer inaccessible. Try passing \"kpti=off\" on the kernel command line\n"); | |
| return -EPERM; | |
| } | |
| spe_pmu = devm_kzalloc(dev, sizeof(*spe_pmu), GFP_KERNEL); | |
| if (!spe_pmu) | |
| return -ENOMEM; | |
| spe_pmu->handle = alloc_percpu(typeof(*spe_pmu->handle)); | |
| if (!spe_pmu->handle) | |
| return -ENOMEM; | |
| spe_pmu->pdev = pdev; | |
| platform_set_drvdata(pdev, spe_pmu); | |
| ret = arm_spe_pmu_irq_probe(spe_pmu); | |
| if (ret) | |
| goto out_free_handle; | |
| ret = arm_spe_pmu_dev_init(spe_pmu); | |
| if (ret) | |
| goto out_free_handle; | |
| ret = arm_spe_pmu_perf_init(spe_pmu); | |
| if (ret) | |
| goto out_teardown_dev; | |
| return 0; | |
| out_teardown_dev: | |
| arm_spe_pmu_dev_teardown(spe_pmu); | |
| out_free_handle: | |
| free_percpu(spe_pmu->handle); | |
| return ret; | |
| } | |
| static void arm_spe_pmu_device_remove(struct platform_device *pdev) | |
| { | |
| struct arm_spe_pmu *spe_pmu = platform_get_drvdata(pdev); | |
| arm_spe_pmu_perf_destroy(spe_pmu); | |
| arm_spe_pmu_dev_teardown(spe_pmu); | |
| free_percpu(spe_pmu->handle); | |
| } | |
| static struct platform_driver arm_spe_pmu_driver = { | |
| .id_table = arm_spe_match, | |
| .driver = { | |
| .name = DRVNAME, | |
| .of_match_table = of_match_ptr(arm_spe_pmu_of_match), | |
| .suppress_bind_attrs = true, | |
| }, | |
| .probe = arm_spe_pmu_device_probe, | |
| .remove = arm_spe_pmu_device_remove, | |
| }; | |
| static int __init arm_spe_pmu_init(void) | |
| { | |
| int ret; | |
| ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, DRVNAME, | |
| arm_spe_pmu_cpu_startup, | |
| arm_spe_pmu_cpu_teardown); | |
| if (ret < 0) | |
| return ret; | |
| arm_spe_pmu_online = ret; | |
| ret = platform_driver_register(&arm_spe_pmu_driver); | |
| if (ret) | |
| cpuhp_remove_multi_state(arm_spe_pmu_online); | |
| return ret; | |
| } | |
| static void __exit arm_spe_pmu_exit(void) | |
| { | |
| platform_driver_unregister(&arm_spe_pmu_driver); | |
| cpuhp_remove_multi_state(arm_spe_pmu_online); | |
| } | |
| module_init(arm_spe_pmu_init); | |
| module_exit(arm_spe_pmu_exit); | |
| MODULE_DESCRIPTION("Perf driver for the ARMv8.2 Statistical Profiling Extension"); | |
| MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>"); | |
| MODULE_LICENSE("GPL v2"); |