| // SPDX-License-Identifier: GPL-2.0-only | |
| // Copyright (c) 2021 Intel Corporation | |
| #include <linux/auxiliary_bus.h> | |
| #include <linux/module.h> | |
| #include <linux/peci.h> | |
| #include <linux/peci-cpu.h> | |
| #include <linux/slab.h> | |
| #include "internal.h" | |
| /** | |
| * peci_temp_read() - read the maximum die temperature from PECI target device | |
| * @device: PECI device to which request is going to be sent | |
| * @temp_raw: where to store the read temperature | |
| * | |
| * It uses GetTemp PECI command. | |
| * | |
| * Return: 0 if succeeded, other values in case errors. | |
| */ | |
| int peci_temp_read(struct peci_device *device, s16 *temp_raw) | |
| { | |
| struct peci_request *req; | |
| req = peci_xfer_get_temp(device); | |
| if (IS_ERR(req)) | |
| return PTR_ERR(req); | |
| *temp_raw = peci_request_temp_read(req); | |
| peci_request_free(req); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_NS_GPL(peci_temp_read, "PECI_CPU"); | |
| /** | |
| * peci_pcs_read() - read PCS register | |
| * @device: PECI device to which request is going to be sent | |
| * @index: PCS index | |
| * @param: PCS parameter | |
| * @data: where to store the read data | |
| * | |
| * It uses RdPkgConfig PECI command. | |
| * | |
| * Return: 0 if succeeded, other values in case errors. | |
| */ | |
| int peci_pcs_read(struct peci_device *device, u8 index, u16 param, u32 *data) | |
| { | |
| struct peci_request *req; | |
| int ret; | |
| req = peci_xfer_pkg_cfg_readl(device, index, param); | |
| if (IS_ERR(req)) | |
| return PTR_ERR(req); | |
| ret = peci_request_status(req); | |
| if (ret) | |
| goto out_req_free; | |
| *data = peci_request_data_readl(req); | |
| out_req_free: | |
| peci_request_free(req); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_NS_GPL(peci_pcs_read, "PECI_CPU"); | |
| /** | |
| * peci_pci_local_read() - read 32-bit memory location using raw address | |
| * @device: PECI device to which request is going to be sent | |
| * @bus: bus | |
| * @dev: device | |
| * @func: function | |
| * @reg: register | |
| * @data: where to store the read data | |
| * | |
| * It uses RdPCIConfigLocal PECI command. | |
| * | |
| * Return: 0 if succeeded, other values in case errors. | |
| */ | |
| int peci_pci_local_read(struct peci_device *device, u8 bus, u8 dev, u8 func, | |
| u16 reg, u32 *data) | |
| { | |
| struct peci_request *req; | |
| int ret; | |
| req = peci_xfer_pci_cfg_local_readl(device, bus, dev, func, reg); | |
| if (IS_ERR(req)) | |
| return PTR_ERR(req); | |
| ret = peci_request_status(req); | |
| if (ret) | |
| goto out_req_free; | |
| *data = peci_request_data_readl(req); | |
| out_req_free: | |
| peci_request_free(req); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_NS_GPL(peci_pci_local_read, "PECI_CPU"); | |
| /** | |
| * peci_ep_pci_local_read() - read 32-bit memory location using raw address | |
| * @device: PECI device to which request is going to be sent | |
| * @seg: PCI segment | |
| * @bus: bus | |
| * @dev: device | |
| * @func: function | |
| * @reg: register | |
| * @data: where to store the read data | |
| * | |
| * Like &peci_pci_local_read, but it uses RdEndpointConfig PECI command. | |
| * | |
| * Return: 0 if succeeded, other values in case errors. | |
| */ | |
| int peci_ep_pci_local_read(struct peci_device *device, u8 seg, | |
| u8 bus, u8 dev, u8 func, u16 reg, u32 *data) | |
| { | |
| struct peci_request *req; | |
| int ret; | |
| req = peci_xfer_ep_pci_cfg_local_readl(device, seg, bus, dev, func, reg); | |
| if (IS_ERR(req)) | |
| return PTR_ERR(req); | |
| ret = peci_request_status(req); | |
| if (ret) | |
| goto out_req_free; | |
| *data = peci_request_data_readl(req); | |
| out_req_free: | |
| peci_request_free(req); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_NS_GPL(peci_ep_pci_local_read, "PECI_CPU"); | |
| /** | |
| * peci_mmio_read() - read 32-bit memory location using 64-bit bar offset address | |
| * @device: PECI device to which request is going to be sent | |
| * @bar: PCI bar | |
| * @seg: PCI segment | |
| * @bus: bus | |
| * @dev: device | |
| * @func: function | |
| * @address: 64-bit MMIO address | |
| * @data: where to store the read data | |
| * | |
| * It uses RdEndpointConfig PECI command. | |
| * | |
| * Return: 0 if succeeded, other values in case errors. | |
| */ | |
| int peci_mmio_read(struct peci_device *device, u8 bar, u8 seg, | |
| u8 bus, u8 dev, u8 func, u64 address, u32 *data) | |
| { | |
| struct peci_request *req; | |
| int ret; | |
| req = peci_xfer_ep_mmio64_readl(device, bar, seg, bus, dev, func, address); | |
| if (IS_ERR(req)) | |
| return PTR_ERR(req); | |
| ret = peci_request_status(req); | |
| if (ret) | |
| goto out_req_free; | |
| *data = peci_request_data_readl(req); | |
| out_req_free: | |
| peci_request_free(req); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL_NS_GPL(peci_mmio_read, "PECI_CPU"); | |
| static const char * const peci_adev_types[] = { | |
| "cputemp", | |
| "dimmtemp", | |
| }; | |
| struct peci_cpu { | |
| struct peci_device *device; | |
| const struct peci_device_id *id; | |
| }; | |
| static void adev_release(struct device *dev) | |
| { | |
| struct auxiliary_device *adev = to_auxiliary_dev(dev); | |
| kfree(adev->name); | |
| kfree(adev); | |
| } | |
| static struct auxiliary_device *adev_alloc(struct peci_cpu *priv, int idx) | |
| { | |
| struct peci_controller *controller = to_peci_controller(priv->device->dev.parent); | |
| struct auxiliary_device *adev; | |
| const char *name; | |
| int ret; | |
| adev = kzalloc_obj(*adev); | |
| if (!adev) | |
| return ERR_PTR(-ENOMEM); | |
| name = kasprintf(GFP_KERNEL, "%s.%s", peci_adev_types[idx], (const char *)priv->id->data); | |
| if (!name) { | |
| ret = -ENOMEM; | |
| goto free_adev; | |
| } | |
| adev->name = name; | |
| adev->dev.parent = &priv->device->dev; | |
| adev->dev.release = adev_release; | |
| adev->id = (controller->id << 16) | (priv->device->addr); | |
| ret = auxiliary_device_init(adev); | |
| if (ret) | |
| goto free_name; | |
| return adev; | |
| free_name: | |
| kfree(name); | |
| free_adev: | |
| kfree(adev); | |
| return ERR_PTR(ret); | |
| } | |
| static void unregister_adev(void *_adev) | |
| { | |
| struct auxiliary_device *adev = _adev; | |
| auxiliary_device_delete(adev); | |
| auxiliary_device_uninit(adev); | |
| } | |
| static int devm_adev_add(struct device *dev, int idx) | |
| { | |
| struct peci_cpu *priv = dev_get_drvdata(dev); | |
| struct auxiliary_device *adev; | |
| int ret; | |
| adev = adev_alloc(priv, idx); | |
| if (IS_ERR(adev)) | |
| return PTR_ERR(adev); | |
| ret = auxiliary_device_add(adev); | |
| if (ret) { | |
| auxiliary_device_uninit(adev); | |
| return ret; | |
| } | |
| ret = devm_add_action_or_reset(&priv->device->dev, unregister_adev, adev); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| static void peci_cpu_add_adevices(struct peci_cpu *priv) | |
| { | |
| struct device *dev = &priv->device->dev; | |
| int ret, i; | |
| for (i = 0; i < ARRAY_SIZE(peci_adev_types); i++) { | |
| ret = devm_adev_add(dev, i); | |
| if (ret) { | |
| dev_warn(dev, "Failed to register PECI auxiliary: %s, ret = %d\n", | |
| peci_adev_types[i], ret); | |
| continue; | |
| } | |
| } | |
| } | |
| static int | |
| peci_cpu_probe(struct peci_device *device, const struct peci_device_id *id) | |
| { | |
| struct device *dev = &device->dev; | |
| struct peci_cpu *priv; | |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| dev_set_drvdata(dev, priv); | |
| priv->device = device; | |
| priv->id = id; | |
| peci_cpu_add_adevices(priv); | |
| return 0; | |
| } | |
| static const struct peci_device_id peci_cpu_device_ids[] = { | |
| { /* Haswell Xeon */ | |
| .x86_vfm = INTEL_HASWELL_X, | |
| .data = "hsx", | |
| }, | |
| { /* Broadwell Xeon */ | |
| .x86_vfm = INTEL_BROADWELL_X, | |
| .data = "bdx", | |
| }, | |
| { /* Broadwell Xeon D */ | |
| .x86_vfm = INTEL_BROADWELL_D, | |
| .data = "bdxd", | |
| }, | |
| { /* Skylake Xeon */ | |
| .x86_vfm = INTEL_SKYLAKE_X, | |
| .data = "skx", | |
| }, | |
| { /* Icelake Xeon */ | |
| .x86_vfm = INTEL_ICELAKE_X, | |
| .data = "icx", | |
| }, | |
| { /* Icelake Xeon D */ | |
| .x86_vfm = INTEL_ICELAKE_D, | |
| .data = "icxd", | |
| }, | |
| { /* Sapphire Rapids Xeon */ | |
| .x86_vfm = INTEL_SAPPHIRERAPIDS_X, | |
| .data = "spr", | |
| }, | |
| { /* Emerald Rapids Xeon */ | |
| .x86_vfm = INTEL_EMERALDRAPIDS_X, | |
| .data = "emr", | |
| }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(peci, peci_cpu_device_ids); | |
| static struct peci_driver peci_cpu_driver = { | |
| .probe = peci_cpu_probe, | |
| .id_table = peci_cpu_device_ids, | |
| .driver = { | |
| .name = "peci-cpu", | |
| }, | |
| }; | |
| module_peci_driver(peci_cpu_driver); | |
| MODULE_AUTHOR("Iwona Winiarska <iwona.winiarska@intel.com>"); | |
| MODULE_DESCRIPTION("PECI CPU driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_IMPORT_NS("PECI"); |