| /* SPDX-License-Identifier: GPL-2.0+ */ | |
| /* | |
| * PCI Express Hot Plug Controller Driver | |
| * | |
| * Copyright (C) 1995,2001 Compaq Computer Corporation | |
| * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) | |
| * Copyright (C) 2001 IBM Corp. | |
| * Copyright (C) 2003-2004 Intel Corporation | |
| * | |
| * All rights reserved. | |
| * | |
| * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> | |
| * | |
| */ | |
| #ifndef _PCIEHP_H | |
| #define _PCIEHP_H | |
| #include <linux/types.h> | |
| #include <linux/pci.h> | |
| #include <linux/pci_hotplug.h> | |
| #include <linux/delay.h> | |
| #include <linux/mutex.h> | |
| #include <linux/rwsem.h> | |
| #include <linux/workqueue.h> | |
| #include "../pcie/portdrv.h" | |
| extern bool pciehp_poll_mode; | |
| extern int pciehp_poll_time; | |
| /* | |
| * Set CONFIG_DYNAMIC_DEBUG=y and boot with 'dyndbg="file pciehp* +p"' to | |
| * enable debug messages. | |
| */ | |
| #define ctrl_dbg(ctrl, format, arg...) \ | |
| pci_dbg(ctrl->pcie->port, format, ## arg) | |
| #define ctrl_err(ctrl, format, arg...) \ | |
| pci_err(ctrl->pcie->port, format, ## arg) | |
| #define ctrl_info(ctrl, format, arg...) \ | |
| pci_info(ctrl->pcie->port, format, ## arg) | |
| #define ctrl_warn(ctrl, format, arg...) \ | |
| pci_warn(ctrl->pcie->port, format, ## arg) | |
| #define SLOT_NAME_SIZE 10 | |
| /** | |
| * struct controller - PCIe hotplug controller | |
| * @pcie: pointer to the controller's PCIe port service device | |
| * @dsn: cached copy of Device Serial Number of Function 0 in the hotplug slot | |
| * (PCIe r6.2 sec 7.9.3); used to determine whether a hotplugged device | |
| * was replaced with a different one during system sleep | |
| * @slot_cap: cached copy of the Slot Capabilities register | |
| * @inband_presence_disabled: In-Band Presence Detect Disable supported by | |
| * controller and disabled per spec recommendation (PCIe r5.0, appendix I | |
| * implementation note) | |
| * @slot_ctrl: cached copy of the Slot Control register | |
| * @ctrl_lock: serializes writes to the Slot Control register | |
| * @cmd_started: jiffies when the Slot Control register was last written; | |
| * the next write is allowed 1 second later, absent a Command Completed | |
| * interrupt (PCIe r4.0, sec 6.7.3.2) | |
| * @cmd_busy: flag set on Slot Control register write, cleared by IRQ handler | |
| * on reception of a Command Completed event | |
| * @queue: wait queue to wake up on reception of a Command Completed event, | |
| * used for synchronous writes to the Slot Control register | |
| * @pending_events: used by the IRQ handler to save events retrieved from the | |
| * Slot Status register for later consumption by the IRQ thread | |
| * @notification_enabled: whether the IRQ was requested successfully | |
| * @power_fault_detected: whether a power fault was detected by the hardware | |
| * that has not yet been cleared by the user | |
| * @poll_thread: thread to poll for slot events if no IRQ is available, | |
| * enabled with pciehp_poll_mode module parameter | |
| * @state: current state machine position | |
| * @state_lock: protects reads and writes of @state; | |
| * protects scheduling, execution and cancellation of @button_work | |
| * @button_work: work item to turn the slot on or off after 5 seconds | |
| * in response to an Attention Button press | |
| * @hotplug_slot: structure registered with the PCI hotplug core | |
| * @reset_lock: prevents access to the Data Link Layer Link Active bit in the | |
| * Link Status register and to the Presence Detect State bit in the Slot | |
| * Status register during a slot reset which may cause them to flap | |
| * @depth: Number of additional hotplug ports in the path to the root bus, | |
| * used as lock subclass for @reset_lock | |
| * @ist_running: flag to keep user request waiting while IRQ thread is running | |
| * @request_result: result of last user request submitted to the IRQ thread | |
| * @requester: wait queue to wake up on completion of user request, | |
| * used for synchronous slot enable/disable request via sysfs | |
| * | |
| * PCIe hotplug has a 1:1 relationship between controller and slot, hence | |
| * unlike other drivers, the two aren't represented by separate structures. | |
| */ | |
| struct controller { | |
| struct pcie_device *pcie; | |
| u64 dsn; | |
| u32 slot_cap; /* capabilities and quirks */ | |
| unsigned int inband_presence_disabled:1; | |
| u16 slot_ctrl; /* control register access */ | |
| struct mutex ctrl_lock; | |
| unsigned long cmd_started; | |
| unsigned int cmd_busy:1; | |
| wait_queue_head_t queue; | |
| atomic_t pending_events; /* event handling */ | |
| unsigned int notification_enabled:1; | |
| unsigned int power_fault_detected; | |
| struct task_struct *poll_thread; | |
| u8 state; /* state machine */ | |
| struct mutex state_lock; | |
| struct delayed_work button_work; | |
| struct hotplug_slot hotplug_slot; /* hotplug core interface */ | |
| struct rw_semaphore reset_lock; | |
| unsigned int depth; | |
| unsigned int ist_running; | |
| int request_result; | |
| wait_queue_head_t requester; | |
| }; | |
| /** | |
| * DOC: Slot state | |
| * | |
| * @OFF_STATE: slot is powered off, no subordinate devices are enumerated | |
| * @BLINKINGON_STATE: slot will be powered on after the 5 second delay, | |
| * Power Indicator is blinking | |
| * @BLINKINGOFF_STATE: slot will be powered off after the 5 second delay, | |
| * Power Indicator is blinking | |
| * @POWERON_STATE: slot is currently powering on | |
| * @POWEROFF_STATE: slot is currently powering off | |
| * @ON_STATE: slot is powered on, subordinate devices have been enumerated | |
| */ | |
| #define OFF_STATE 0 | |
| #define BLINKINGON_STATE 1 | |
| #define BLINKINGOFF_STATE 2 | |
| #define POWERON_STATE 3 | |
| #define POWEROFF_STATE 4 | |
| #define ON_STATE 5 | |
| /** | |
| * DOC: Flags to request an action from the IRQ thread | |
| * | |
| * These are stored together with events read from the Slot Status register, | |
| * hence must be greater than its 16-bit width. | |
| * | |
| * %DISABLE_SLOT: Disable the slot in response to a user request via sysfs or | |
| * an Attention Button press after the 5 second delay | |
| * %RERUN_ISR: Used by the IRQ handler to inform the IRQ thread that the | |
| * hotplug port was inaccessible when the interrupt occurred, requiring | |
| * that the IRQ handler is rerun by the IRQ thread after it has made the | |
| * hotplug port accessible by runtime resuming its parents to D0 | |
| */ | |
| #define DISABLE_SLOT (1 << 16) | |
| #define RERUN_ISR (1 << 17) | |
| #define ATTN_BUTTN(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_ABP) | |
| #define POWER_CTRL(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_PCP) | |
| #define MRL_SENS(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_MRLSP) | |
| #define ATTN_LED(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_AIP) | |
| #define PWR_LED(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_PIP) | |
| #define NO_CMD_CMPL(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_NCCS) | |
| #define PSN(ctrl) (((ctrl)->slot_cap & PCI_EXP_SLTCAP_PSN) >> 19) | |
| void pciehp_request(struct controller *ctrl, int action); | |
| void pciehp_handle_button_press(struct controller *ctrl); | |
| void pciehp_handle_disable_request(struct controller *ctrl); | |
| void pciehp_handle_presence_or_link_change(struct controller *ctrl, u32 events); | |
| int pciehp_configure_device(struct controller *ctrl); | |
| void pciehp_unconfigure_device(struct controller *ctrl, bool presence); | |
| void pciehp_queue_pushbutton_work(struct work_struct *work); | |
| struct controller *pcie_init(struct pcie_device *dev); | |
| int pcie_init_notification(struct controller *ctrl); | |
| void pcie_shutdown_notification(struct controller *ctrl); | |
| void pcie_clear_hotplug_events(struct controller *ctrl); | |
| void pcie_enable_interrupt(struct controller *ctrl); | |
| void pcie_disable_interrupt(struct controller *ctrl); | |
| int pciehp_power_on_slot(struct controller *ctrl); | |
| void pciehp_power_off_slot(struct controller *ctrl); | |
| void pciehp_get_power_status(struct controller *ctrl, u8 *status); | |
| #define INDICATOR_NOOP -1 /* Leave indicator unchanged */ | |
| void pciehp_set_indicators(struct controller *ctrl, int pwr, int attn); | |
| void pciehp_get_latch_status(struct controller *ctrl, u8 *status); | |
| int pciehp_query_power_fault(struct controller *ctrl); | |
| int pciehp_card_present(struct controller *ctrl); | |
| int pciehp_card_present_or_link_active(struct controller *ctrl); | |
| int pciehp_check_link_status(struct controller *ctrl); | |
| int pciehp_check_link_active(struct controller *ctrl); | |
| bool pciehp_device_replaced(struct controller *ctrl); | |
| void pciehp_release_ctrl(struct controller *ctrl); | |
| int pciehp_sysfs_enable_slot(struct hotplug_slot *hotplug_slot); | |
| int pciehp_sysfs_disable_slot(struct hotplug_slot *hotplug_slot); | |
| int pciehp_reset_slot(struct hotplug_slot *hotplug_slot, bool probe); | |
| int pciehp_get_attention_status(struct hotplug_slot *hotplug_slot, u8 *status); | |
| int pciehp_set_raw_indicator_status(struct hotplug_slot *h_slot, u8 status); | |
| int pciehp_get_raw_indicator_status(struct hotplug_slot *h_slot, u8 *status); | |
| int pciehp_slot_reset(struct pcie_device *dev); | |
| static inline const char *slot_name(struct controller *ctrl) | |
| { | |
| return hotplug_slot_name(&ctrl->hotplug_slot); | |
| } | |
| static inline struct controller *to_ctrl(struct hotplug_slot *hotplug_slot) | |
| { | |
| return container_of(hotplug_slot, struct controller, hotplug_slot); | |
| } | |
| #endif /* _PCIEHP_H */ |