| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (C) 2015 Broadcom Corporation | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/pci.h> | |
| #include <linux/clk.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_pci.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/phy/phy.h> | |
| #include "../pci.h" | |
| #include "pcie-iproc.h" | |
| static const struct of_device_id iproc_pcie_of_match_table[] = { | |
| { | |
| .compatible = "brcm,iproc-pcie", | |
| .data = (int *)IPROC_PCIE_PAXB, | |
| }, { | |
| .compatible = "brcm,iproc-pcie-paxb-v2", | |
| .data = (int *)IPROC_PCIE_PAXB_V2, | |
| }, { | |
| .compatible = "brcm,iproc-pcie-paxc", | |
| .data = (int *)IPROC_PCIE_PAXC, | |
| }, { | |
| .compatible = "brcm,iproc-pcie-paxc-v2", | |
| .data = (int *)IPROC_PCIE_PAXC_V2, | |
| }, | |
| { /* sentinel */ } | |
| }; | |
| MODULE_DEVICE_TABLE(of, iproc_pcie_of_match_table); | |
| static int iproc_pltfm_pcie_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct iproc_pcie *pcie; | |
| struct device_node *np = dev->of_node; | |
| struct resource reg; | |
| struct pci_host_bridge *bridge; | |
| int ret; | |
| bridge = devm_pci_alloc_host_bridge(dev, sizeof(*pcie)); | |
| if (!bridge) | |
| return -ENOMEM; | |
| pcie = pci_host_bridge_priv(bridge); | |
| pcie->dev = dev; | |
| pcie->type = (uintptr_t)of_device_get_match_data(dev); | |
| ret = of_address_to_resource(np, 0, ®); | |
| if (ret < 0) { | |
| dev_err(dev, "unable to obtain controller resources\n"); | |
| return ret; | |
| } | |
| pcie->base = devm_pci_remap_cfgspace(dev, reg.start, | |
| resource_size(®)); | |
| if (!pcie->base) { | |
| dev_err(dev, "unable to map controller registers\n"); | |
| return -ENOMEM; | |
| } | |
| pcie->base_addr = reg.start; | |
| if (of_property_read_bool(np, "brcm,pcie-ob")) { | |
| u32 val; | |
| ret = of_property_read_u32(np, "brcm,pcie-ob-axi-offset", | |
| &val); | |
| if (ret) { | |
| dev_err(dev, | |
| "missing brcm,pcie-ob-axi-offset property\n"); | |
| return ret; | |
| } | |
| pcie->ob.axi_offset = val; | |
| pcie->need_ob_cfg = true; | |
| } | |
| /* | |
| * DT nodes are not used by all platforms that use the iProc PCIe | |
| * core driver. For platforms that require explicit inbound mapping | |
| * configuration, "dma-ranges" would have been present in DT | |
| */ | |
| pcie->need_ib_cfg = of_property_read_bool(np, "dma-ranges"); | |
| /* PHY use is optional */ | |
| pcie->phy = devm_phy_optional_get(dev, "pcie-phy"); | |
| if (IS_ERR(pcie->phy)) | |
| return PTR_ERR(pcie->phy); | |
| /* PAXC doesn't support legacy IRQs, skip mapping */ | |
| switch (pcie->type) { | |
| case IPROC_PCIE_PAXC: | |
| case IPROC_PCIE_PAXC_V2: | |
| bridge->map_irq = NULL; | |
| break; | |
| default: | |
| break; | |
| } | |
| ret = iproc_pcie_setup(pcie, &bridge->windows); | |
| if (ret) { | |
| dev_err(dev, "PCIe controller setup failed\n"); | |
| return ret; | |
| } | |
| platform_set_drvdata(pdev, pcie); | |
| return 0; | |
| } | |
| static void iproc_pltfm_pcie_remove(struct platform_device *pdev) | |
| { | |
| struct iproc_pcie *pcie = platform_get_drvdata(pdev); | |
| iproc_pcie_remove(pcie); | |
| } | |
| static void iproc_pltfm_pcie_shutdown(struct platform_device *pdev) | |
| { | |
| struct iproc_pcie *pcie = platform_get_drvdata(pdev); | |
| iproc_pcie_shutdown(pcie); | |
| } | |
| static struct platform_driver iproc_pltfm_pcie_driver = { | |
| .driver = { | |
| .name = "iproc-pcie", | |
| .of_match_table = of_match_ptr(iproc_pcie_of_match_table), | |
| }, | |
| .probe = iproc_pltfm_pcie_probe, | |
| .remove = iproc_pltfm_pcie_remove, | |
| .shutdown = iproc_pltfm_pcie_shutdown, | |
| }; | |
| module_platform_driver(iproc_pltfm_pcie_driver); | |
| MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>"); | |
| MODULE_DESCRIPTION("Broadcom iPROC PCIe platform driver"); | |
| MODULE_LICENSE("GPL v2"); |